Search Results

Search found 196 results on 8 pages for 'centos6'.

Page 5/8 | < Previous Page | 1 2 3 4 5 6 7 8  | Next Page >

• pg_dump not working - do I need to change order of $PATH?

  - by A4J

  I'm trying to set the $PATH to pick up the latest version of pg_dump as I'm currently getting a mismatch error while doing a migrate in my Rails app (I recently changed the schema type to SQL). I have added a new file in /etc/profile.d called pg_dump.sh, and inside that put: PG_DUMP=/usr/pgsql-9.1 export PG_DUMP PATH=$PATH:$PG_DUMP/bin export PATH On looking at echo $PATH, I get: /usr/local/rvm/gems/ruby-1.9.3-p194/bin:/usr/local/rvm/gems/ruby-1.9.3-p194@global/bin:/usr/local/rvm/rubies/ruby-1.9.3-p194/bin:/usr/local/rvm/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/pgsql-9.1/bin:/root/bin And I still get the error. Do I need to change the order? If so any ideas how? Output of 'ls /usr/pgsql-9.1/bin': clusterdb droplang pg_archivecleanup pg_ctl pg_standby psql createdb dropuser pg_basebackup pg_dump pg_test_fsync reindexdb createlang ecpg pgbench pg_dumpall pg_upgrade vacuumdb createuser initdb pg_config pg_resetxlog postgres vacuumlo dropdb oid2name pg_controldata pg_restore postmaster And output of 'which pg_dump': /usr/bin/pg_dump Error message on running cap 'deploy:migrate': ** [out :: 46.4.9.199] pg_dump: server version: 9.1.4; pg_dump version: 8.4.11 ** [out :: 46.4.9.199] pg_dump: aborting because of server version mismatch ** [out :: 46.4.9.199] rake aborted! ** [out :: 46.4.9.199] Error dumping database output of 'pg_dump --version': pg_dump (PostgreSQL) 8.4.11

  Read the article

• CentOS iscsi initiator has session but there is no block device

  - by jcalfee314

  I have installed the scsi-target-utils package on CentOS and I used it to perform a discovery. The discovery did give me an active session. I restarted the iscsi service but I do not see any new devices (fdisk -l). I see in /var/log/messages that my connection is operational now. I'm not sure how to debug this further. Can someone direct me into fixing this? discovery: iscsiadm -m discovery -t sendtargets -p 192.168.0.155 returns: 192.168.0.155:3260,-1 iqn.2009-02.com.twinstrata:cloudarray:sn-1d07c1b62d4ec8f3 Just to verify it actually worked: iscsiadm -m session returns tcp: [1] 192.168.0.155:3260,1 iqn.2009-02.com.twinstrata:cloudarray:sn-1d07c1b62d4ec8f3 restarting as the directions say to do: service iscsi restart output written to /var/log/message Stopping iscsi: Sep 20 12:14:22 localhost kernel: connection1:0: detected conn error (1020) [ OK ] Starting iscsi: Sep 20 12:14:22 localhost kernel: scsi1 : iSCSI Initiator over TCP/IP Sep 20 12:14:22 localhost iscsid: Connection1:0 to [target: iqn.2009-02.com.twinstrata:cloudarray:sn-1d07c1b62d4ec8f3, portal: 192.168.0.155,3260] through [iface: default] is shutdown. Sep 20 12:14:22 localhost iscsid: Could not set session2 priority. READ/WRITE throughout and latency could be affected. [ OK ] [root@db iscsi]# Sep 20 12:14:23 localhost iscsid: Connection2:0 to [target: iqn.2009-02.com.twinstrata:cloudarray:sn-1d07c1b62d4ec8f3, portal: 192.168.0.155,3260] through [iface: default] is operational now Ran a login command: iscsiadm -m node -T iqn.2009-02.com.twinstrata:cloudarray:sn-1d07c1b62d4ec8f3 -p 192.168.0.155 -l No errors, no logging occurred. Next I compared the output from "fdisk -l|egrep dev" both with the iscsi session and without. There is no difference. I suppose I could just look in /etc/mtab. Any ideas on how I can get an iscsi device?

  Read the article

• APC module causing strange error

  - by clifgriffin

  When I run php -v I get: PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib64/php/modules/apc.so' - /usr/lib64/php/modules/apc.so: undefined symbol: php_pcre_exec in Unknown on line 0 This isn't my first rodeo. I've setup APC multiple times. This is a MediaTemple Dedicated Virtual 4.0 with Plesk 11. Plesk 11 is the only thing essentially different from the other servers I've set this up on. I've verified that pcre-devel is installed. I've compiled APC from source as well as used pecl to install it. No difference. I also tried downgrading to APC 3.0.19, with no love.

  Read the article

• Apache Virtual host (SSL) Doc Root issue

  - by Steve Hamber

  I am having issues with the SSL document root of my vhosts configuration. Http sees to work fine and navigates to the root directory and publishes the page fine - DocumentRoot /var/www/html/websites/ssl.domain.co.uk/ (as specified in my vhost config) However, https seems to be looking for files in the main apache document root found further up the httpd.conf file, and is not being overwritten by the vhost config. (I assume that vhost config does overwrite the default doc root?). DocumentRoot: The directory out of which you will serve your documents. By default, all requests are taken from this directory, but symbolic links and aliases may be used to point to other locations. DocumentRoot "/var/www/html/websites/" Here is my config, I am quite a new Linux guy so any advise is appreciated on why this is happening!? NameVirtualHost *:80 NameVirtualHost *:443 <VirtualHost *:443> ServerAdmin root@localhost DocumentRoot /var/www/html/websites/https_domain.co.uk/ ServerName ssl.domain.co.uk ErrorLog /etc/httpd/logs/ssl.domain.co.uk/ssl.domain.co.uk-error_log CustomLog /etc/httpd/logs/ssl.domain.co.uk/ssl.domain.o.uk-access_log common SSLEngine on SSLOptions +StrictRequire SSLCertificateFile /var/www/ssl/ssl_domain_co_uk.crt SSLCertificateKeyFile /var/www/ssl/domain.co.uk.key SSLCACertificateFile /var/www/ssl/ssl_domain_co_uk.ca-bundle </VirtualHost> <VirtualHost *:80> ServerAdmin root@localhost DocumentRoot /var/www/html/websites/ssl.domain.co.uk/ ServerName ssl.domain.co.uk ErrorLog /etc/httpd/logs/ssl.domain.co.uk/ssl.domain.xo.uk-error_log CustomLog /etc/httpd/logs/ssl.domain.co.uk/ssl.domain.xo.uk-access_log common </VirtualHost>

  Read the article

• In Cent os 6.2 can i update Kernel version to 3.4 ? if so how to upgrade kernel?

  - by shiva

  Hi, I have a server with Centos 6.2 with Kernel version 2.6 , but i need to increase my application Performance. The Kernel Version 3.4 has x32abi which can improve the performance so i want to upgrade to 3.4 ? Is it possible? I tried 1) downloading kernel compiling and installing but still i see the same Kernel version.. What went wrong? i followed the process in mentioned in the below link.. http://www.tecmint.com/kernel-3-5-released-install-compile-in-redhat-centos-and-fedora/

  Read the article

• PHP short_open_tag Won't Enable (CentOS 6)

  - by brack

  I'm setting up an Apache2, PHP 5.3.3 server running on CentOS 6. My web application uses the short tags <? and <?=. I can't seem to get the short tags enabled. When I run phpinfo() I see short_open_tag = off, however in /etc/php.ini I have this: short_open_tag = on (and yes I've restarted the server). I've also tried using <?php ini_set('short_open_tag','1'); ?> at the start of a page and it still doesn't parse code in short tags. The only thing I can think of is there's another php.ini file somewhere that is being used instead of, or overriding the one at /etc/php.ini. Any advice?

  Read the article

• How do I keep a bridge enabled on a bonded interface?

  - by jlawer

  I'm working on setting up a pair of CentOS 6.3 servers that will run a couple of KVM vms and have come across a problem setting up a bridge on a bond. I am using Mode 4 (802.3ad) bonding on a pair of stacked Dell Powerconnect 5524 switches connecting to R320 servers. There are 2 links (1 to each switch) that form a Link Aggregation Group (802.3ad / LACP bonding). On top of the bond I have VLAN Tagging. I've verified this is a problem on multiple other bonding modes so it isn't just a mode 4 issue. I am testing what happens when 1 link is dropped (ie switch dies, cable breaks, etc). If I don't have a bridge (for KVM), everything works fine, failover happens as expected. If I have the bridge enabled, it works fine until failover (unplugging a cable). When failover happens /var/log/messages shows the slave link going down, followed within a second by: kernel: br1: port 1(bond0.8) entering disabled state The thing is /proc/net/bonding/bond0 shows the link is up as expected (simply with only 1 slave instead of 2). If I plug the cable back in it recovers and brings the bridge back to an enabled state. I actually have tested this while a ping is occuring and if the timing is right a packet will actually leave the system after the link is lost, but before the disabled message occurs. This disabled state I assumed was STP, but I have disabled STP on the bridge configuration and this issue still occurs. brctl showstp br1 still shows the link as disabled when it is running without a slave. I also switched between the nics in the server (I have 2x Broadcom & 4x intel). It doesn't matter which configuration I have. Does anyone know of a way to force the bridge to stay enabled or why its detecting the bond as disabled, when it isn't?

  Read the article

• CentOS 6: Can not start NFS

  - by Chris

  I am unable to start the NFS service. When starting there is no error. But the services are stopt after it. No messages at all in /var/log/messages. Same happens to rpcbind serivce. Any idea what this could be? I also tried to disable iptables. [root@server1 ~]# service nfs start [root@server1 ~]# service nfs status rpc.svcgssd is stopped rpc.mountd is stopped nfsd is stopped rpc.rquotad is stopped [root@server1 ~]# service rpcbind start [root@server1 ~]# service rpcbind status rpcbind is stopped [root@server1 ~]# cat /etc/exports /tmp *(ro) [root@server1 ~]# chkconfig --list | egrep '(rpcbind|nfs)' nfs 0:off 1:off 2:on 3:on 4:on 5:on 6:off nfslock 0:off 1:off 2:on 3:on 4:on 5:on 6:off rpcbind 0:off 1:off 2:on 3:on 4:on 5:on 6:off

  Read the article

• Apache fails silently after installation of MapServer 6.2.0

  - by wnstnsmth

  I've recently compiled MapServer 6.2 on a CentOS 6.3 machine, using ./configure --with-ogr=/usr/bin/gdal-config --with-gdal=/usr/bin/gdal-config --with-proj=/usr --with-geos=/usr/bin/geos-config --with-postgis=/usr/bin/pg_config --with-php=/usr/include/php --with-wfs --with-wfsclient --with-wmsclient --enable-debug --with-threads --with-wcs --with-sos --with-gd --with-freetype=/usr/bin --with-jpeg --with-cairo --with-curl if that is of interest, anyway. So after that, Apache/2.2.15 silently fails to restart, i.e. when apachectl graceful, it says "httpd not running, trying to start". There is nothing of interest in the Apache errors_log, /var/log/messages, and it is weird because so far it has always worked. Restarting the machine multiple times did not solve the problem. Some other stuff I did: [root@R12X0210 cgi-bin]# service httpd status httpd is stopped [root@R12X0210 cgi-bin]# ps aux|grep httpd root 1846 0.0 0.0 103236 864 pts/0 S+ 12:11 0:00 grep httpd I suspect this might have something to do with a php module that was altered/added by MapServer, but I don't really know... I don't even know how to properly debug this.

  Read the article

• Lustre - issues with simple setup

  - by ethrbunny

  Issue: I'm trying to assess the (possible) use of Lustre for our group. To this end I've been trying to create a simple system to explore the nuances. I can't seem to get past the 'llmount.sh' test with any degree of success. What I've done: Each system (throwaway PCs with 70Gb HD, 2Gb RAM) is formatted with CentOS 6.2. I then update everything and install the Lustre kernel from downloads.whamcloud.com and add on the various (appropriate) lustre and e2fs RPM files. Systems are rebooted and tested with 'llmount.sh' (and then cleared with 'llmountcleanup.sh'). All is well to this point. First I create an MDS/MDT system via: /usr/sbin/mkfs.lustre --mgs --mdt --fsname=lustre --device-size=200000 --param sys.timeout=20 --mountfsoptions=errors=remount-ro,user_xattr,acl --param lov.stripesize=1048576 --param lov.stripecount=0 --param mdt.identity_upcall=/usr/sbin/l_getidentity --backfstype ldiskfs --reformat /tmp/lustre-mdt1 and then mkdir -p /mnt/mds1 mount -t lustre -o loop,user_xattr,acl /tmp/lustre-mdt1 /mnt/mds1 Next I take 3 systems and create a 2Gb loop mount via: /usr/sbin/mkfs.lustre --ost --fsname=lustre --device-size=200000 --param sys.timeout=20 --mgsnode=lustre_MDS0@tcp --backfstype ldiskfs --reformat /tmp/lustre-ost1 mkdir -p /mnt/ost1 mount -t lustre -o loop /tmp/lustre-ost1 /mnt/ost1 The logs on the MDT box show the OSS boxes connecting up. All appears ok. Last I create a client and attach to the MDT box: mkdir -p /mnt/lustre mount -t lustre -o user_xattr,acl,flock luster_MDS0@tcp:/lustre /mnt/lustre Again, the log on the MDT box shows the client connection. Appears to be successful. Here's where the issues (appear to) start. If I do a 'df -h' on the client it hangs after showing the system drives. If I attempt to create files (via 'dd') on the lustre mount the session hangs and the job can't be killed. Rebooting the client is the only solution. If I do a 'lctl dl' from the client it shows that only 2/3 OST boxes are found and 'UP'. [root@lfsclient0 etc]# lctl dl 0 UP mgc MGC10.127.24.42@tcp 282d249f-fcb2-b90f-8c4e-2f1415485410 5 1 UP lov lustre-clilov-ffff880037e4d400 00fc176e-3156-0490-44e1-da911be9f9df 4 2 UP lmv lustre-clilmv-ffff880037e4d400 00fc176e-3156-0490-44e1-da911be9f9df 4 3 UP mdc lustre-MDT0000-mdc-ffff880037e4d400 00fc176e-3156-0490-44e1-da911be9f9df 5 4 UP osc lustre-OST0000-osc-ffff880037e4d400 00fc176e-3156-0490-44e1-da911be9f9df 5 5 UP osc lustre-OST0003-osc-ffff880037e4d400 00fc176e-3156-0490-44e1-da911be9f9df 5 Doing a 'lfs df' from the client shows: [root@lfsclient0 etc]# lfs df UUID 1K-blocks Used Available Use% Mounted on lustre-MDT0000_UUID 149944 16900 123044 12% /mnt/lustre[MDT:0] OST0000 : inactive device OST0001 : Resource temporarily unavailable OST0002 : Resource temporarily unavailable lustre-OST0003_UUID 187464 24764 152636 14% /mnt/lustre[OST:3] filesystem summary: 187464 24764 152636 14% /mnt/lustre Given that each OSS box has a 2Gb (loop) mount I would expect to see this reflected in available size. There are no errors on the MDS/MDT box to indicate that multiple OSS/OST boxes have been lost. EDIT: each system has all other systems defined in /etc/hosts and entries in iptables to provide access. SO: I'm clearly making several mistakes. Any pointers as to where to start correcting them?

  Read the article

• Forwarding 80 to 443 on Nagios woes

  - by Ethabelle

  I perhaps just need some extra insight because I don't see where I'm going wrong. I used an SSL Cert to secure our nagios server. We want to specifically require all traffic over nagios (like 2 users, lol) to use SSL. So I thought, oh, mod_rewrite + Rewrite Rule in .htaccess, right? So I went into the DocumentRoot and did a vi .htaccess (one didn't already exist) and then I put in the following rule; RewriteEngine On RewriteCond %{SERVER_PORT} 80 RewriteRule ^(.*)$ https://our.server.org/$1 [R,L] This does absolutely nothing. Does nada. Whhhyy.. Note: AllowOverride all in httpd.conf is on. Also, I verified that the module is not uncommented out ... but note, I couldn't find the mod_rewrite module installed so I copied it over from another server and placed it in modules/mod_rewrite.so . It was weird because it was enabled in the httpd.conf file, but then didn't exist in modules ... I'm a baddie :(

  Read the article

• vagrant fails to bring up additional adapter for centos vm using virtual box provider

  - by Anadi Misra

  this is in continuation of the question asked here about host only adapter on dhcp I upgraded to vagrant 1.6.3 and the updated Vagrantfile to following setting for multiple adapters # add additional adapter for inter machine networking dev.vm.network :private_network, :type => "dhcp", :adapter => "2", :netmask => "255.255.255.0" it goes through creating adapters but then fails bringing up the mic on vm Anadis-MacBook-Pro:full-stack-env anadi$ vagrant up Bringing machine 'full-stack-env' up with 'virtualbox' provider... ==> full-stack-env: Clearing any previously set forwarded ports... ==> full-stack-env: Clearing any previously set network interfaces... ==> full-stack-env: Preparing network interfaces based on configuration... full-stack-env: Adapter 1: nat full-stack-env: Adapter 2: hostonly ==> full-stack-env: Forwarding ports... full-stack-env: 22 => 4223 (adapter 1) full-stack-env: 8080 => 8090 (adapter 1) ==> full-stack-env: Running 'pre-boot' VM customizations... ==> full-stack-env: Booting VM... ==> full-stack-env: Waiting for machine to boot. This may take a few minutes... full-stack-env: SSH address: 127.0.0.1:4223 full-stack-env: SSH username: vagrant full-stack-env: SSH auth method: private key full-stack-env: Warning: Connection timeout. Retrying... full-stack-env: Warning: Connection timeout. Retrying... full-stack-env: Warning: Remote connection disconnect. Retrying... ==> full-stack-env: Machine booted and ready! ==> full-stack-env: Checking for guest additions in VM... ==> full-stack-env: Setting hostname... ==> full-stack-env: Configuring and enabling network interfaces... The following SSH command responded with a non-zero exit status. Vagrant assumes that this means the command failed! ARPCHECK=no /sbin/ifup eth 2> /dev/null Stdout from the command: Device eth does not seem to be present, delaying initialization. Stderr from the command: how ever when I log in to the environment I see two network interfaces as expected Anadis-MacBook-Pro:full-stack-env anadi$ vagrant ssh Last login: Wed Jun 4 12:54:47 2014 from 10.0.2.2 [vagrant@full-stack-env ~]$ ifconfig eth0 Link encap:Ethernet HWaddr 08:00:27:BD:39:57 inet addr:10.0.2.15 Bcast:10.0.2.255 Mask:255.255.255.0 inet6 addr: fe80::a00:27ff:febd:3957/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:511 errors:0 dropped:0 overruns:0 frame:0 TX packets:360 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:54574 (53.2 KiB) TX bytes:46675 (45.5 KiB) eth1 Link encap:Ethernet HWaddr 08:00:27:A3:86:C9 inet addr:172.28.128.3 Bcast:172.28.128.255 Mask:255.255.255.0 inet6 addr: fe80::a00:27ff:fea3:86c9/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5 errors:0 dropped:0 overruns:0 frame:0 TX packets:9 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1360 (1.3 KiB) TX bytes:894 (894.0 b) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) I am bit confused here on why it is trying to add another mic (eth2)? In the VM I used for creating this vagrant box, I had added two NICs already.

  Read the article

• Frequent Kernel Panic on CentOS 6.5

  - by Manuel Sopena Ballesteros

  I have a webserver with the configuration below: VMWare ESXi environemt CPanel installed CentOS release 6.5 (Final) 4 CPUs 2G RAM 2x VM disks 100G each LVM system My issue is I am getting kernel panic quite frequently. These is a list of some processes blocked I could see from the console: mysqld queueprocd httpd suphp vmtoolsd loop0 auditd this is my sar logs Linux 2.6.32-431.3.1.el6.x86_64 (test01) 08/22/2014 _x86_64_ (4 CPU) 12:00:01 AM CPU %user %nice %system %iowait %steal %idle 12:10:01 AM all 26.86 0.01 0.98 0.57 0.00 71.57 12:20:01 AM all 1.78 0.02 1.03 0.08 0.00 97.09 12:30:01 AM all 26.34 0.02 0.85 0.05 0.00 72.74 12:40:01 AM all 27.12 0.01 1.11 1.22 0.00 70.54 12:50:01 AM all 1.59 0.02 0.94 0.13 0.00 97.32 01:00:01 AM all 26.10 0.01 0.77 0.04 0.00 73.07 01:10:01 AM all 27.51 0.01 1.16 0.14 0.00 71.18 01:20:01 AM all 1.80 0.07 1.06 0.08 0.00 96.99 01:30:01 AM all 26.19 0.01 0.78 0.05 0.00 72.96 01:40:01 AM all 26.62 0.02 0.87 0.05 0.00 72.45 01:50:02 AM all 1.35 0.01 0.87 0.02 0.00 97.75 02:00:01 AM all 26.11 0.02 0.69 0.02 0.00 73.17 02:10:01 AM all 26.73 0.02 0.89 0.14 0.00 72.21 02:20:01 AM all 1.45 0.01 0.92 0.04 0.00 97.58 02:30:01 AM all 26.59 0.01 1.06 0.03 0.00 72.31 02:40:01 AM all 26.27 0.01 0.72 0.05 0.00 72.95 02:50:01 AM all 0.86 0.01 0.50 0.09 0.00 98.53 03:00:01 AM all 25.61 0.02 0.39 0.03 0.00 73.96 03:10:01 AM all 26.30 0.08 0.66 0.14 0.00 72.82 03:20:01 AM all 0.81 0.01 0.51 0.04 0.00 98.63 03:30:02 AM all 26.15 0.02 0.53 0.07 0.00 73.24 03:40:01 AM all 26.06 0.01 0.47 0.04 0.00 73.42 03:50:01 AM all 0.96 0.02 0.51 0.03 0.00 98.48 Average: all 17.69 0.02 0.79 0.14 0.00 81.36 06:58:14 AM LINUX RESTART 07:00:01 AM CPU %user %nice %system %iowait %steal %idle 07:10:01 AM all 1.04 0.02 0.57 0.95 0.00 97.42 07:20:02 AM all 0.66 0.01 0.39 0.06 0.00 98.87 07:30:01 AM all 25.71 0.01 0.45 0.16 0.00 73.67 07:40:01 AM all 25.88 0.01 0.35 0.08 0.00 73.68 As you can see the server became unresponsive at 03.50 AM and I had to reset the VM at 06.58 AM to fix it. sar -d 03:00:01 PM dev8-16 0.16 0.01 3.37 20.78 0.00 12.40 9.29 0.15 03:00:01 PM dev8-0 4.08 5.72 77.50 20.38 0.06 15.15 3.13 1.28 03:00:01 PM dev253-0 10.37 5.74 80.87 8.35 0.13 12.52 1.24 1.29 03:00:01 PM dev253-1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 03:10:01 PM dev8-16 0.27 0.17 3.17 12.22 0.00 11.49 7.95 0.22 03:10:01 PM dev8-0 6.37 18.98 136.19 24.34 0.05 7.25 2.18 1.39 03:10:01 PM dev253-0 17.91 19.15 137.94 8.77 0.13 7.11 0.78 1.41 03:10:01 PM dev253-1 0.18 0.00 1.41 8.00 0.00 9.09 0.52 0.01 03:10:01 PM DEV tps rd_sec/s wr_sec/s avgrq-sz avgqu-sz await svctm %util 03:20:01 PM dev8-16 0.17 0.23 2.04 13.39 0.00 6.07 5.29 0.09 03:20:01 PM dev8-0 3.83 18.57 78.45 25.35 0.05 13.25 2.73 1.05 03:20:01 PM dev253-0 10.30 18.80 80.49 9.64 0.14 13.89 1.03 1.06 03:20:01 PM dev253-1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 03:30:01 PM dev8-16 0.26 0.16 4.59 18.56 0.00 6.44 5.54 0.14 03:30:01 PM dev8-0 5.97 24.07 117.83 23.77 0.05 8.53 2.13 1.27 03:30:01 PM dev253-0 15.90 24.23 122.42 9.22 0.12 7.71 0.81 1.29 03:30:01 PM dev253-1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 03:40:01 PM dev8-16 0.20 0.00 2.32 11.44 0.00 8.35 5.90 0.12 03:40:01 PM dev8-0 4.39 19.58 77.94 22.24 0.06 12.87 2.12 0.93 03:40:01 PM dev253-0 10.25 19.58 80.25 9.74 0.12 11.63 0.91 0.94 03:40:01 PM dev253-1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 03:50:01 PM dev8-16 0.23 0.50 2.32 12.44 0.00 6.27 5.13 0.12 03:50:01 PM dev8-0 5.09 9.00 95.04 20.45 0.04 7.36 2.10 1.07 03:50:01 PM dev253-0 12.47 9.50 96.82 8.53 0.08 6.76 0.87 1.08 03:50:01 PM dev253-1 0.07 0.00 0.54 8.00 0.00 14.10 0.40 0.00 04:00:01 PM dev8-16 0.21 0.00 2.04 9.89 0.00 7.00 5.87 0.12 04:00:01 PM dev8-0 4.68 1.64 94.70 20.57 0.05 10.71 2.41 1.13 04:00:01 PM dev253-0 12.27 1.64 96.74 8.02 0.12 9.95 0.93 1.14 sar -q 01:00:01 AM 6 205 2.02 1.32 0.81 01:10:01 AM 3 187 0.08 0.72 0.86 01:20:01 AM 2 187 0.04 0.18 0.49 01:30:01 AM 4 205 2.04 1.34 0.82 01:40:01 AM 2 185 0.02 0.68 0.83 01:50:02 AM 1 185 0.08 0.15 0.45 02:00:01 AM 5 202 2.02 1.30 0.78 02:10:01 AM 4 185 0.11 0.72 0.84 02:20:01 AM 1 183 0.17 0.15 0.45 02:30:01 AM 5 206 2.03 1.32 0.79 02:40:01 AM 2 184 0.08 0.70 0.83 02:50:01 AM 1 183 0.00 0.10 0.43 03:00:01 AM 7 205 2.03 1.32 0.78 03:10:01 AM 2 194 0.34 0.73 0.83 03:20:01 AM 1 184 0.00 0.13 0.44 03:30:02 AM 4 201 2.04 1.32 0.78 03:40:01 AM 2 193 0.06 0.67 0.81 03:50:01 AM 1 183 0.06 0.12 0.43 Average: 3 192 0.68 0.70 0.69 06:58:14 AM LINUX RESTART 07:00:01 AM runq-sz plist-sz ldavg-1 ldavg-5 ldavg-15 07:10:01 AM 2 181 0.00 0.09 0.11 07:20:02 AM 1 179 0.00 0.00 0.04 07:30:01 AM 4 197 2.12 1.33 0.58 sar -r Linux 2.6.32-431.3.1.el6.x86_64 (test01) 08/22/2014 _x86_64_ (4 CPU) 12:00:01 AM kbmemfree kbmemused %memused kbbuffers kbcached kbcommit %commit 12:10:01 AM 227484 1694468 88.16 117444 917004 635308 10.50 12:20:01 AM 219692 1702260 88.57 119556 920540 630940 10.43 12:30:01 AM 196248 1725704 89.79 121376 923592 695048 11.49 12:40:01 AM 127524 1794428 93.36 125004 1016196 633048 10.46 12:50:01 AM 127156 1794796 93.38 128212 1014536 624992 10.33 01:00:01 AM 110764 1811188 94.24 129964 1001608 700016 11.57 01:10:01 AM 160560 1761392 91.65 132260 973472 628640 10.39 01:20:01 AM 133076 1788876 93.08 134144 982608 655524 10.83 01:30:01 AM 121512 1800440 93.68 135548 985676 700500 11.58 01:40:01 AM 140640 1781312 92.68 137220 988576 628280 10.38 01:50:02 AM 139160 1782792 92.76 138688 990672 625224 10.33 02:00:01 AM 106112 1815840 94.48 139940 993976 700360 11.57 02:10:01 AM 155400 1766552 91.91 142112 971864 625656 10.34 02:20:01 AM 154056 1767896 91.98 143732 975556 621352 10.27 02:30:01 AM 110856 1811096 94.23 145032 978288 709360 11.72 02:40:01 AM 140200 1781752 92.71 146568 980656 624872 10.33 02:50:01 AM 137600 1784352 92.84 148940 984484 621948 10.28 03:00:01 AM 105032 1816920 94.54 150208 985736 706060 11.67 03:10:01 AM 168996 1752956 91.21 154708 941500 656312 10.85 03:20:01 AM 169408 1752544 91.19 156096 944100 621780 10.28 03:30:02 AM 132360 1789592 93.11 157724 951612 701296 11.59 03:40:01 AM 159012 1762940 91.73 158940 942560 656292 10.85 03:50:01 AM 163192 1758760 91.51 160312 944576 624544 10.32 Average: 148089 1773863 92.29 140162 969973 653363 10.80 06:58:14 AM LINUX RESTART 07:00:01 AM kbmemfree kbmemused %memused kbbuffers kbcached kbcommit %commit 07:10:01 AM 1016628 905324 47.10 85568 447556 600932 9.93 07:20:02 AM 1009996 911956 47.45 87616 451200 596156 9.85 07:30:01 AM 961128 960824 49.99 89164 464332 658912 10.89 07:40:01 AM 973376 948576 49.35 90880 473084 600176 9.92 dmesg does not show any relevant information. I don't see any bottleneck in sar, any idea what can I check next? thank you very much

  Read the article

• Set up multiple websites on a local web server

  - by mickburkejnr

  I have spent the last few days setting up a CentOS 6 server on my local network so that I can host multiple projects that I'm currently working on. Everything has been set up so that I access the server by typing 192.168.1.10 and the Apache test page comes up. What I'm aiming to do is to access different projects by typing in 192.168.1.10/project, and then view the project as if it was on it's own standalone server. I have thought about just sticking these sites inside folders on the server then accessing them that way, but a lot of my projects use CakePHP so this isn't feasible. So what I need to do is create VirtualHosts in Apache to allow me to do this, but without using a domain name. I want to stick to using the IP address of the machine (which is static). Any ideas? EDIT I've followed Peter's suggestion, but now I have a new problem. In the httpd.conf file I have entered the following information: NameVirtualHost *:80 <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot /www/html/project1 ServerName local.project1.com ErrorLog logs/local.project1.com-error_log CustomLog logs/local.project1.com-access_log common </VirtualHost> And now Apache is saying: Starting httpd: Warning: DocumentRoot [/www/html/project1] does not exist When it clearly does exist. I've disabled SELinux and I can confirm this isn't turned on. I've also checked the ownership of the folder, and its owned by root. I can also save files to these folders using a guest FTP account (which isn't associated to root), so the folders are being listed and can be written to. But when I try the folder in a web browser it doesn't seem to work either. I've also done a reboot of the server and the problem persists. What should I change in order to resolve this?

  Read the article

• ISPconfig3 + CentOS 6.2 , confused on how to move forward after initial install?

  - by Damainman

  I installed ISPCONFIG3 on centos 6.2 using the great guide on howtoforge.com. Everything is up and running and I can access ISPCONFIG via a browser. However I am not sure how to move forward with the initial setup so I can setup the very first account and get my website live. Details: Only have 1 server, the centos+ispconfig is running on a virtual machine of XEN XCP. I setup the server name to be server1.mydomain.com. I only have 2 usable ips. I plan to use them as follows: xx.xx.xx.01 : For my website and the websites of all accounts I add. xx.xx.xx.02 : For ns1.mydomain.com and ns2.mydomain.com (Yea I know they should be different ips at different locations, but this is what I have to work with at the moment.... ) I registered the nameservers at my registrar with the .02 ip. I want to use bind and ISPconfig to run the DNS on my server itself and not via my registrar. Right now if I go to the .01 IP it shows the centos+apache successful install page. So to break it down basically I am not sure where to start when it comes to: (What to consider and what to do to setup the first domain on the server) Telling bind to use the name server domains with .02. Setting up my First website(which will be my main website) in ISPconfig so mydomain.com resolves properly to my server. Make it so when you go to the .01 IP, it either redirects or shows the contents of my main website. (If this can't be done, then any advice is appreciated) Making sure that when I add a new domain, it automatically puts in the proper information for the domain so it points to the right mail, database, dns, entry. If I overlooked a tutorial then please feel free to let me know, and any advice would be greatly appreciated. Some of the tutorials I found were not specific to doing everything on only one server with Centos+Apache+Bind. Right now all I did was install centos and install ISPconfig3. Trying to move forward correctly so I don't mess up everything I did by not knowing what to do. Thank you in advance!!

  Read the article

• Trying to install SawMill and getting the following error:

  - by Itai Ganot

  [root@sawmill sawmill]# ./sawmill ./sawmill: error while loading shared libraries: libldap-2.3.so.0: cannot open shared object file: No such file or directory Using yum provides libldap_r-2.3.so.0 i found that the package which includes this file is: compat-openldap-2.3.43-2.el6.i686 . After installing it i still get the error. If i use locate, i can find the file in /usr/lib, so I tried to create a symbolic link to the file from /usr/lib to /usr/lib64 but i still get the same error. I also tried setting LD_LIBRARY_PATH=/usr/lib/ and LD_LIBRARY_PATH=/usr/lib64 but it doesn't allow me to run the sawmill installation script. Anyone knows how to solve this issue?

  Read the article

• Howto enable SMPTS (465) postfix CentOS

  - by user197284

  I need help is enabling SMTPS. I use postfix , dovecot with MySQL(virtual domains). I do not know how to enable SMTPS(465). I already added tls related settings and key and certificate in the "/etc/postfix/main.cf" OS: Centos 6.4 64 bit Please my /etc/postfix/master.cf file here # ========================================================================== # service type private unpriv chroot wakeup maxproc command + args # (yes) (yes) (yes) (never) (100) # ========================================================================== smtp inet n - n - - smtpd -o content_filter=smtp-amavis:127.0.0.1:10024 -o receive_override_options=no_address_mappings pickup fifo n - n 60 1 pickup -o content_filter= -o receive_override_options=no_header_body_checks cleanup unix n - n - 0 cleanup qmgr fifo n - n 300 1 qmgr #qmgr fifo n - n 300 1 oqmgr tlsmgr unix - - n 1000? 1 tlsmgr rewrite unix - - n - - trivial-rewrite bounce unix - - n - 0 bounce defer unix - - n - 0 bounce trace unix - - n - 0 bounce verify unix - - n - 1 verify flush unix n - n 1000? 0 flush proxymap unix - - n - - proxymap smtp unix - - n - - smtp # When relaying mail as backup MX, disable fallback_relay to avoid MX loops relay unix - - n - - smtp -o fallback_relay= # -o smtp_helo_timeout=5 -o smtp_connect_timeout=5 showq unix n - n - - showq error unix - - n - - error discard unix - - n - - discard local unix - n n - - local virtual unix - n n - - virtual lmtp unix - - n - - lmtp anvil unix - - n - 1 anvil scache unix - - n - 1 scache # # ==================================================================== # Interfaces to non-Postfix software. Be sure to examine the manual # pages of the non-Postfix software to find out what options it wants. # ==================================================================== maildrop unix - n n - - pipe flags=DRhu user=vmail argv=/usr/local/bin/maildrop -d ${recipient} uucp unix - n n - - pipe flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient) ifmail unix - n n - - pipe flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient) bsmtp unix - n n - - pipe flags=Fq. user=foo argv=/usr/local/sbin/bsmtp -f $sender $nexthop $recipient # # spam/virus section # smtp-amavis unix - - y - 2 smtp -o smtp_data_done_timeout=1200 -o disable_dns_lookups=yes -o smtp_send_xforward_command=yes 127.0.0.1:10025 inet n - y - - smtpd -o content_filter= -o smtpd_helo_restrictions= -o smtpd_sender_restrictions= -o smtpd_recipient_restrictions=permit_mynetworks,reject -o mynetworks=127.0.0.0/8 -o smtpd_error_sleep_time=0 -o smtpd_soft_error_limit=1001 -o smtpd_hard_error_limit=1000 -o receive_override_options=no_header_body_checks -o smtpd_bind_address=127.0.0.1 -o smtpd_helo_required=no -o smtpd_client_restrictions= -o smtpd_restriction_classes= -o disable_vrfy_command=no -o strict_rfc821_envelopes=yes # # Dovecot LDA dovecot unix - n n - - pipe flags=DRhu user=vmail:mail argv=/usr/libexec/dovecot/deliver -d ${recipient} # # Vacation mail vacation unix - n n - - pipe flags=Rq user=vacation argv=/var/spool/vacation/vacation.pl -f ${sender} -- ${recipient} retry unix - - n - - error proxywrite unix - - n - 1 proxymap Please help to enable SMTPS. I have amavis enabled

  Read the article

• OpenLdap 2.4 on centos 6 doesn't listen on port 636

  - by Oliver Henriot

  I have an openldap 2.4 server on centos 6 whose confg I copied from those I have running under openldap 2.3 servers on centos 5 machines. On openldap 2.3, specifying TLSCACertificateFile, TLSCertificateFile and TLSCertificateKeyFile with correct values makes the server listen on port 636. This is not the case on the openldap 2.4 setup. I have configured it with loglevel -1 but I have not seen any clue as to what might be wrong and reading the openldap 2.4 manual doesn't indicate if any of the other TLS related parameters are now mandatory. I don't think so though because if I run the service manually, using "# /usr/sbin/slapd -u ldap -h "ldap:/// ldaps:/// ldapi:///"", the server does listen on port 636 and I can query it using "ldapsearch -H ldaps://myserver:636". Is there something I am missing to get the server to listen on port 636 without having to always launch it manually? Is this linked to centos 6 or openldap 2.4? Thank you. Cheers,

  Read the article

• Error compiling PHP 5.5.9 on CentOS 6.5 during make command

  - by Chris Mancini

  Here is the error message: cc: internal compiler error: Killed (program cc1) Please submit a full bug report, with preprocessed source if appropriate. See <file:///usr/share/doc/gcc-4.6/README.Bugs> for instructions. make: *** [ext/fileinfo/libmagic/apprentice.lo] Error 1 The very last thing make was processing is apprentice.lo which appears to be part of the image manipulation libraries (maybe?). I am using Ansible to provision my instance. It is a Digital Ocean single core 512MB VM. I have been using vagrant / ansible with the same config locally for dev and it has compiled fine, this is the first cloud VM I am attempting to provision. The only difference is the base image for my DO server is coming from DO and for my local dev, I built my own Vagrant box via VirtualBox from a stock CentOS basic server install. I pull it down from my DropBox. The problem has been experienced by others and reported as a php bug report My php ansible role up to the error: --- - name: Download php source get_url: url={{ php_source_url }} dest=/tmp register: get_url_result - name: untar the source package command: tar -xvf php-{{ php_version }}.tar.gz chdir=/tmp when: get_url_result.changed or php_reinstall - name: configure php 5.5 command: > ./configure --prefix={{ php_prefix }} --with-config-file-path={{ php_config_file_path }} --enable-fpm --enable-ftp --enable-mbstring --enable-pdo --enable-soap --enable-sockets=shared --enable-zip --with-curl --with-fpm-group={{ nginx_group }} --with-fpm-user={{ nginx_user }} --with-freetype-dir=/usr/lib64/ --with-gd --with-jpeg-dir=/usr/lib64/ --with-libdir=lib64 --with-mcrypt --with-openssl --with-pdo-mysql --with-pear --with-readline --with-tidy --with-xsl --with-zlib --without-pdo-sqlite --without-sqlite3 chdir=/tmp/php-{{ php_version }} when: get_url_result.changed or php_reinstall - name: make clean when reinstalling command: make clean chdir=/tmp/php-{{ php_version }} when: php_reinstall - name: make php command: make chdir=/tmp/php-{{ php_version }} when: get_url_result.changed or php_reinstall Thanks in advance for any help. :)

  Read the article

• Can't mount home after trying to resize (bad geometry: block count exceeds size of device).

  - by Lynn

  This is on a fresh computer (super computer actually). It got to me with 15T on the home mount and 50G on the root. I tried allocating 7T to root and resizing (since I'm putting a local yum repo on this machine as it has no internet access nor will it ever). I tried following the instructions here: Centos 6.3 disk space allocation but something went wrong and the home won't mount again. Instead I get from dmesg | tail: EXT4-fs (dm-2): bad geometry: block count 4294967295 exceeds size of device (1342177280 blocks) df -h nets this output: Filesystem Size Used Avail Use% Mounted on /dev/mapper/VolGroup-lv_root 7.0T 3.6G 6.6T 1% / tmpfs 190G 216K 190G 1% /dev/shm /dev/sda1 485M 38M 422M 9% /boot I didn't have any files on /dev/mapper/VolGroup-lv_home. Will simply running mke2fs fix it to be mountable? What sort of options should I run it with. I've never resized volumes before or used mke2fs. I don't want to make this mess worse.

  Read the article

• I added some options to stop spam with Postfix, but now won't send email to remote domains

  - by willdanceforfun

  I had a working Postfix server, but added a few lines to my main.cf in a hope to block some common spam. Those lines I added were: smtpd_helo_required = yes smtpd_recipient_restrictions = reject_invalid_hostname, reject_unknown_recipient_domain, reject_unauth_pipelining, permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination, reject_rbl_client multi.uribl.com, reject_rbl_client dsn.rfc-ignorant.org, reject_rbl_client dul.dnsbl.sorbs.net, reject_rbl_client list.dsbl.org, reject_rbl_client sbl-xbl.spamhaus.org, reject_rbl_client bl.spamcop.net, reject_rbl_client dnsbl.sorbs.net, reject_rbl_client cbl.abuseat.org, reject_rbl_client ix.dnsbl.manitu.net, reject_rbl_client combined.rbl.msrbl.net, reject_rbl_client rabl.nuclearelephant.com, permit It appears my postfix is now receiving normal emails fine, and blocking spam emails. But when I now try to use this server myself to send to a remote domain (an email not on my server) I get bounced, with maillog saying something like this: Nov 12 06:19:36 srv postfix/smtpd[11756]: NOQUEUE: reject: RCPT from unknown[xx.xx.x.xxx]: 450 4.1.2 <[email protected]>: Recipient address rejected: Domain not found; from=<[email protected]> to=<[email protected]> proto=ESMTP helo=<[192.168.1.100]> Is that saying 'domain not found' for gmail.com? Why is that recipient address rejected? An output of my postconf-n is: alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases broken_sasl_auth_clients = yes command_directory = /usr/sbin config_directory = /etc/postfix daemon_directory = /usr/libexec/postfix data_directory = /var/lib/postfix debug_peer_level = 2 html_directory = no inet_interfaces = all inet_protocols = all mail_owner = postfix mailbox_size_limit = 0 mailq_path = /usr/bin/mailq.postfix manpage_directory = /usr/share/man mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain mydomain = primarydomain.net myhostname = mail.primarydomain.net myorigin = $myhostname newaliases_path = /usr/bin/newaliases.postfix queue_directory = /var/spool/postfix readme_directory = /usr/share/doc/postfix-2.6.6/README_FILES relay_domains = $mydestination, primarydomain.net, secondarydomain.org sample_directory = /usr/share/doc/postfix-2.6.6/samples sendmail_path = /usr/sbin/sendmail.postfix setgid_group = postdrop smtpd_client_restrictions = permit_sasl_authenticated smtpd_helo_required = yes smtpd_recipient_restrictions = reject_invalid_hostname, reject_unknown_recipient_domain, reject_unauth_pipelining, permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination, reject_rbl_client multi.uribl.com, reject_rbl_client dsn.rfc-ignorant.org, reject_rbl_client dul.dnsbl.sorbs.net, reject_rbl_client list.dsbl.org, reject_rbl_client sbl-xbl.spamhaus.org, reject_rbl_client bl.spamcop.net, reject_rbl_client dnsbl.sorbs.net, reject_rbl_client cbl.abuseat.org, reject_rbl_client ix.dnsbl.manitu.net, reject_rbl_client combined.rbl.msrbl.net, reject_rbl_client rabl.nuclearelephant.com, permit smtpd_sasl_auth_enable = yes smtpd_sasl_path = private/auth smtpd_sasl_type = dovecot smtpd_sender_restrictions = reject_unknown_sender_domain soft_bounce = no unknown_local_recipient_reject_code = 550 virtual_alias_domains = mail.secondarydomain.org virtual_alias_maps = hash:/etc/postfix/virtual Any insight greatly appreciated. Edit: here is the dig mx gmail.com from the server: ; <<>> DiG 9.8.2rc1-RedHat-9.8.2-0.17.rc1.el6_4.4 <<>> mx gmail.com ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 31766 ;; flags: qr rd ra; QUERY: 1, ANSWER: 5, AUTHORITY: 4, ADDITIONAL: 14 ;; QUESTION SECTION: ;gmail.com. IN MX ;; ANSWER SECTION: gmail.com. 1207 IN MX 5 gmail-smtp-in.l.google.com. gmail.com. 1207 IN MX 30 alt3.gmail-smtp-in.l.google.com. gmail.com. 1207 IN MX 20 alt2.gmail-smtp-in.l.google.com. gmail.com. 1207 IN MX 40 alt4.gmail-smtp-in.l.google.com. gmail.com. 1207 IN MX 10 alt1.gmail-smtp-in.l.google.com. ;; AUTHORITY SECTION: gmail.com. 109168 IN NS ns1.google.com. gmail.com. 109168 IN NS ns4.google.com. gmail.com. 109168 IN NS ns3.google.com. gmail.com. 109168 IN NS ns2.google.com. ;; ADDITIONAL SECTION: alt1.gmail-smtp-in.l.google.com. 207 IN A 173.194.70.27 alt1.gmail-smtp-in.l.google.com. 248 IN AAAA 2a00:1450:4001:c02::1b gmail-smtp-in.l.google.com. 200 IN A 173.194.67.26 gmail-smtp-in.l.google.com. 248 IN AAAA 2a00:1450:400c:c05::1b alt3.gmail-smtp-in.l.google.com. 207 IN A 74.125.143.27 alt3.gmail-smtp-in.l.google.com. 249 IN AAAA 2a00:1450:400c:c05::1b alt2.gmail-smtp-in.l.google.com. 207 IN A 173.194.69.27 alt2.gmail-smtp-in.l.google.com. 248 IN AAAA 2a00:1450:4008:c01::1b alt4.gmail-smtp-in.l.google.com. 207 IN A 173.194.79.27 alt4.gmail-smtp-in.l.google.com. 249 IN AAAA 2607:f8b0:400e:c01::1a ns2.google.com. 281970 IN A 216.239.34.10 ns3.google.com. 281970 IN A 216.239.36.10 ns4.google.com. 281970 IN A 216.239.38.10 ns1.google.com. 281970 IN A 216.239.32.10

  Read the article

• Cannot send email to info@ or support@

  - by user3022598

  I am trying to send email from my gmail account to a couple user accounts I have on my new Centos server. The email is setup correctly and I can send receive from accounts ok except info and support. I tried to setup two users "info" and "support" I have a php form that sends out email that works fine for all users except info and support. To test this and make sure that something did not change from yesterday i just created a new user "frank" and tried the submit form and it worked fine. From my gmail account i can email "frank" however i cannot email "info" or "support" The logs I pulled are as follows and i think i see the issue but no idea how to fix it. Aug 15 12:20:55 mail postfix/qmgr[1568]: 1815C20A83: from=, size=1815, nrcpt=1 (queue active) Aug 15 12:20:55 mail postfix/local[2270]: 1815C20A83: to=, relay=local, delay=0.28, delays=0.26/0.01/0/0.01, dsn=2.0.0, status=sent (delivered to maildir) Aug 15 12:17:13 mail postfix/qmgr[1568]: 3C18520A7F: from=, size=1818, nrcpt=1 (queue active) Aug 15 12:17:13 mail postfix/local[2201]: 3C18520A7F: to=, orig_to=, relay=local, delay=0.28, delays=0.25/0.01/0/0.01, dsn=2.0.0, status=sent (delivered to maildir) Aug 15 12:15:24 mail postfix/qmgr[1568]: 2F79420A79: from=, size=1813, nrcpt=1 (queue active) Aug 15 12:15:24 mail postfix/local[2155]: 2F79420A79: to=, orig_to=, relay=local, delay=0.29, delays=0.27/0.01/0/0.01, dsn=2.0.0, status=sent (delivered to maildir) For some reason frank goes out fine, however support and info go to root? Why?

  Read the article

• task blocked for more than

  - by Manuel Sopena Ballesteros

  I have a webserver with the configuration below: VMWare ESXi environemt CPanel installed CentOS release 6.5 (Final) 4 CPUs 2G RAM 2x VM disks 100G each LVM system My issue is I am getting kernel panic quite frequently. These is a list of some processes blocked I could see from the console: mysqld queueprocd httpd suphp vmtoolsd loop0 auditd this is my sar logs Linux 2.6.32-431.3.1.el6.x86_64 (test01) 08/22/2014 _x86_64_ (4 CPU) 12:00:01 AM CPU %user %nice %system %iowait %steal %idle 12:10:01 AM all 26.86 0.01 0.98 0.57 0.00 71.57 12:20:01 AM all 1.78 0.02 1.03 0.08 0.00 97.09 12:30:01 AM all 26.34 0.02 0.85 0.05 0.00 72.74 12:40:01 AM all 27.12 0.01 1.11 1.22 0.00 70.54 12:50:01 AM all 1.59 0.02 0.94 0.13 0.00 97.32 01:00:01 AM all 26.10 0.01 0.77 0.04 0.00 73.07 01:10:01 AM all 27.51 0.01 1.16 0.14 0.00 71.18 01:20:01 AM all 1.80 0.07 1.06 0.08 0.00 96.99 01:30:01 AM all 26.19 0.01 0.78 0.05 0.00 72.96 01:40:01 AM all 26.62 0.02 0.87 0.05 0.00 72.45 01:50:02 AM all 1.35 0.01 0.87 0.02 0.00 97.75 02:00:01 AM all 26.11 0.02 0.69 0.02 0.00 73.17 02:10:01 AM all 26.73 0.02 0.89 0.14 0.00 72.21 02:20:01 AM all 1.45 0.01 0.92 0.04 0.00 97.58 02:30:01 AM all 26.59 0.01 1.06 0.03 0.00 72.31 02:40:01 AM all 26.27 0.01 0.72 0.05 0.00 72.95 02:50:01 AM all 0.86 0.01 0.50 0.09 0.00 98.53 03:00:01 AM all 25.61 0.02 0.39 0.03 0.00 73.96 03:10:01 AM all 26.30 0.08 0.66 0.14 0.00 72.82 03:20:01 AM all 0.81 0.01 0.51 0.04 0.00 98.63 03:30:02 AM all 26.15 0.02 0.53 0.07 0.00 73.24 03:40:01 AM all 26.06 0.01 0.47 0.04 0.00 73.42 03:50:01 AM all 0.96 0.02 0.51 0.03 0.00 98.48 Average: all 17.69 0.02 0.79 0.14 0.00 81.36 06:58:14 AM LINUX RESTART 07:00:01 AM CPU %user %nice %system %iowait %steal %idle 07:10:01 AM all 1.04 0.02 0.57 0.95 0.00 97.42 07:20:02 AM all 0.66 0.01 0.39 0.06 0.00 98.87 07:30:01 AM all 25.71 0.01 0.45 0.16 0.00 73.67 07:40:01 AM all 25.88 0.01 0.35 0.08 0.00 73.68 As you can see the server became unresponsive at 03.50 AM and I had to reset the VM at 06.58 AM to fix it. dmesg does not show any relevant information. I don't see any bottleneck in sar, any idea what can I check next? thank you very much

  Read the article

• Nginx + PHP-FPM on Centos 6.5 gives me 502 Bad Gateway (fpm error: unable to read what child say: Bad file descriptor)

  - by Latheesan Kanes

  I am setting up a standard LEMP stack. My current setup is giving me the following error: 502 Bad Gateway This is what is currently installed on my server: Here's the configurations I've created/updated so far, can some one take a look at the following and see where the error might be? I've already checked my logs, there's nothing in there (http://i.imgur.com/iRq3ksb.png). And I saw the following in /var/log/php-fpm/error.log file. sidenote: both the nginx and php-fpm has been configured to run under a local account called www-data and the following folders exits on the server nginx.conf global nginx configuration user www-data; worker_processes 6; worker_rlimit_nofile 100000; error_log /var/log/nginx/error.log crit; pid /var/run/nginx.pid; events { worker_connections 2048; use epoll; multi_accept on; } http { include /etc/nginx/mime.types; default_type application/octet-stream; # cache informations about FDs, frequently accessed files can boost performance open_file_cache max=200000 inactive=20s; open_file_cache_valid 30s; open_file_cache_min_uses 2; open_file_cache_errors on; # to boost IO on HDD we can disable access logs access_log off; # copies data between one FD and other from within the kernel # faster then read() + write() sendfile on; # send headers in one peace, its better then sending them one by one tcp_nopush on; # don't buffer data sent, good for small data bursts in real time tcp_nodelay on; # server will close connection after this time keepalive_timeout 60; # number of requests client can make over keep-alive -- for testing keepalive_requests 100000; # allow the server to close connection on non responding client, this will free up memory reset_timedout_connection on; # request timed out -- default 60 client_body_timeout 60; # if client stop responding, free up memory -- default 60 send_timeout 60; # reduce the data that needs to be sent over network gzip on; gzip_min_length 10240; gzip_proxied expired no-cache no-store private auth; gzip_types text/plain text/css text/xml text/javascript application/x-javascript application/xml; gzip_disable "MSIE [1-6]\."; # Load vHosts include /etc/nginx/conf.d/*.conf; } conf.d/www.domain.com.conf my vhost entry ## Nginx php-fpm Upstream upstream wwwdomaincom { server unix:/var/run/php-fcgi-www-data.sock; } ## Global Config client_max_body_size 10M; server_names_hash_bucket_size 64; ## Web Server Config server { ## Server Info listen 80; server_name domain.com *.domain.com; root /home/www-data/public_html; index index.html index.php; ## Error log error_log /home/www-data/logs/nginx-errors.log; ## DocumentRoot setup location / { try_files $uri $uri/ @handler; expires 30d; } ## These locations would be hidden by .htaccess normally #location /app/ { deny all; } ## Disable .htaccess and other hidden files location /. { return 404; } ## Magento uses a common front handler location @handler { rewrite / /index.php; } ## Forward paths like /js/index.php/x.js to relevant handler location ~ .php/ { rewrite ^(.*.php)/ $1 last; } ## Execute PHP scripts location ~ \.php$ { try_files $uri =404; expires off; fastcgi_read_timeout 900; fastcgi_pass wwwdomaincom; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } ## GZip Compression gzip on; gzip_comp_level 8; gzip_min_length 1000; gzip_proxied any; gzip_types text/plain application/xml text/css text/js application/x-javascript; } /etc/php-fpm.d/www-data.conf my php-fpm pool config ## Nginx php-fpm Upstream upstream wwwdomaincom { server unix:/var/run/php-fcgi-www-data.sock; } ## Global Config client_max_body_size 10M; server_names_hash_bucket_size 64; ## Web Server Config server { ## Server Info listen 80; server_name domain.com *.domain.com; root /home/www-data/public_html; index index.html index.php; ## Error log error_log /home/www-data/logs/nginx-errors.log; ## DocumentRoot setup location / { try_files $uri $uri/ @handler; expires 30d; } ## These locations would be hidden by .htaccess normally #location /app/ { deny all; } ## Disable .htaccess and other hidden files location /. { return 404; } ## Magento uses a common front handler location @handler { rewrite / /index.php; } ## Forward paths like /js/index.php/x.js to relevant handler location ~ .php/ { rewrite ^(.*.php)/ $1 last; } ## Execute PHP scripts location ~ \.php$ { try_files $uri =404; expires off; fastcgi_read_timeout 900; fastcgi_pass wwwdomaincom; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } ## GZip Compression gzip on; gzip_comp_level 8; gzip_min_length 1000; gzip_proxied any; gzip_types text/plain application/xml text/css text/js application/x-javascript; } I've got a file in /home/www-data/public_html/index.php with the code <?php phpinfo(); ?> (file uploaded as user www-data).

  Read the article

• Can a named (bind) crash make a server unreachable?

  - by giorgio79

  My server recently became unreachable, and after restart a named error was the last line I found in /var/log/messages before restart: Jun 26 00:15:06 host named[1303]: error (network unreachable) resolving 'dlv.isc.org/DNSKEY/IN': 2001:500:71::29#53 Jun 26 06:38:55 host kernel: imklog 5.8.10, log source = /proc/kmsg started. Jun 26 06:38:55 host rsyslogd: [origin software="rsyslogd" swVersion="5.8.10" x-pid="1294" x-info="http://www.rsyslog.com"] start Jun 26 06:38:55 host kernel: Initializing cgroup subsys cpuset Can a named crash make a server unreachable? I doubt it, as I assume I should still be able to login with ssh via IP, but the server did not respond...So, I am trying to make heavy guesses here.

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8  | Next Page >