Search Results

Search found 39156 results on 1567 pages for 'device driver development'.

Page 5/1567 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Radeon Mobility HD 5470 Not Working

  - by Promather

  I recently bought a new HP DV6-3118SA laptop, but I am having a very discouraging problem with the graphics card. The graphics card is Radeon Mobility HD 5470. It doesn't install by default, but I do get some message suggesting to install the driver. If I install that driver, the next time I reboot, the screen goes blank and that's it! The same happens if I install the proprietary driver (fglrx) from ATI website. Could you please help me with this? EDIT: Following @Ronald and @Oli advice, I am dumping the output of lspci -k: 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: agpgart-intel Kernel modules: intel-agp 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02) Kernel driver in use: pcieport Kernel modules: shpchp 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: i915 Kernel modules: i915 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) Subsystem: Hewlett-Packard Company Device 144a 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel modules: iTCO_wdt 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ahci Kernel modules: ahci 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel modules: i2c-i801 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: intel ips Kernel modules: intel_ips 01:00.0 VGA compatible controller: ATI Technologies Inc Manhattan [Mobility Radeon HD 5000 Series] Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: radeon Kernel modules: radeon 01:00.1 Audio device: ATI Technologies Inc Manhattan HDMI Audio [Mobility Radeon HD 5000 Series] Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 02:00.0 Network controller: RaLink RT3090 Wireless 802.11n 1T/1R PCIe Subsystem: Hewlett-Packard Company Device 1453 Kernel driver in use: rt2800pci Kernel modules: rt2860sta, rt2800pci 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: r8169 Kernel modules: r8169 7f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) Subsystem: Hewlett-Packard Company Device 144a

  Read the article

• com0com silent install (test signed com0com.sys shows up as signed in explorer but not in Device Manager)

  - by Andrew

  My goal is to have the com0com serial driver install without popping up the install wizard on both WinXP and Win2000. I am working on WinXP x86. I have followed the test signing instructions for the com0com driver, replacing amd64 with i386 at line 60. I have added my test certificate as both a root and trustedprovider using the following commands: certmgr /add com0com.cer /r localMachine root certmgr /add com0com.cer /r localMachine trustedprovider And verified that it is listed under both locations. I then run the newly built setup.exe. This installs the signed com0com.sys file into C:\WINDOWS\system32\DRIVERS and sets up a pair of virtual serial ports and a bus between them. Using explorer, I go to the DRIVERS directory, right click on the com0com.sys file and verify that it has the "test" digital signature. I then go into Device Manager, open the "com0com serial port emulators" entry, pick an entry and do Properties-Driver and see that it says "Not digitally signed". I click details for the driver and can see that it is referring to the com0com.sys driver file that I just confirmed is signed. I found what might be a related issue but I'm not sure. Does WinXP demand a WHQL signature? If so, does that explain why the com0com.sys file is signed but the device driver entries say they aren't signed?

  Read the article

• I need Selenium to open it's web browser in a larger resolution ( preferably maximized)

  - by user1854271

  I am using Selenium WebDriver and coding in Python I have looked all over the place and the best I could find were things written in different languages. I also tried to use the export tool on Selenium IDE but when I look at the data says that the function is not supported for export. EDIT: The reason I need the browser to open up with a larger resolution is because the web application that I am testing is supporting tablet resolution as so elements are different depending on the resolution of the browser window. This is the script I exported from the IDE with a couple of modifications. from selenium import webdriver from selenium.webdriver.common.by import By from selenium.webdriver.support.ui import Select from selenium.common.exceptions import NoSuchElementException import unittest, time, re from Funk_Lib import RS class CreatingEditingDeletingVault(unittest.TestCase): def setUp(self): self.driver = webdriver.Firefox() self.driver.implicitly_wait(30) self.base_url = "http://cimdev-qa40/" self.verificationErrors = [] def test_creating_editing_deleting_vault(self): driver = self.driver driver.get(self.base_url + "/Login?contoller=Home") driver.find_element_by_id("UserName").click() driver.find_element_by_id("UserName").clear() driver.find_element_by_id("UserName").send_keys("[email protected]") driver.find_element_by_name("Password").click() driver.find_element_by_name("Password").clear() driver.find_element_by_name("Password").send_keys("Codigo#123") driver.find_element_by_id("fat-btn").click() driver.get(self.base_url + "/Content/Vaults/") driver.find_element_by_link_text("Content").click() driver.find_element_by_link_text("Vaults").click() driver.find_element_by_css_selector("button.btn.dropdown-toggle").click() driver.find_element_by_link_text("New vault").click() driver.find_element_by_name("Name").clear() driver.find_element_by_name("Name").send_keys("Test Vault") driver.find_element_by_xpath("//button[@onclick=\"vault_action('createvault', null, $('#CreateVault [name=\\'Name\\']').val())\"]").click() driver.find_element_by_css_selector("button.btn.dropdown-toggle").click() driver.find_element_by_link_text("Rename vault").click() driver.find_element_by_name("Id").click() Select(driver.find_element_by_name("Id")).select_by_visible_text("Test Vault") driver.find_element_by_css_selector("option[value=\"2\"]").click() driver.find_element_by_name("Name").clear() driver.find_element_by_name("Name").send_keys("Test Change") driver.find_element_by_xpath("//button[@onclick=\"vault_action('renamevault', $('#RenameVault [name=\\'Id\\']').val(), $('#RenameVault [name=\\'Name\\']').val())\"]").click() driver.find_element_by_css_selector("button.btn.dropdown-toggle").click() driver.find_element_by_link_text("Delete vault").click() driver.find_element_by_name("Id").click() Select(driver.find_element_by_name("Id")).select_by_visible_text("Test Change") driver.find_element_by_css_selector("option[value=\"2\"]").click() driver.find_element_by_xpath("//button[@onclick=\"vault_action('deletevault', $('#DeleteVault [name=\\'Id\\']').val(), '')\"]").click() def is_element_present(self, how, what): try: self.driver.find_element(by=how, value=what) except NoSuchElementException, e: return False return True def tearDown(self): self.driver.quit() self.assertEqual([], self.verificationErrors) if __name__ == "__main__": unittest.main()

  Read the article

• Kernel Panic every time I open a print queue

  - by Gray

  Every time I open any printer queue I get a kernel panic and have to reboot. It's quite frustrating. I've tried removing/adding printers, clearing all caches with Onyx, repairing permissions, all manner of things to no avail. Any tips would be greatly appreciated! ==== CRASH REPORT ==== Interval Since Last Panic Report: 25551 sec Panics Since Last Report: 1 Anonymous UUID: 322E8128-0027-4C2F-9264-6A9D9F1BD13E Thu Aug 27 10:04:23 2009 panic(cpu 0 caller 0x001AB0FE): Kernel trap at 0x00233080, type 14=page fault, registers: CR0: 0x8001003b, CR2: 0x00000008, CR3: 0x01157000, CR4: 0x00000660 EAX: 0x00000000, EBX: 0x03f05df0, ECX: 0x2ad007fd, EDX: 0x2ad02d2d CR2: 0x00000008, EBP: 0x2e6abb78, ESI: 0x03f136a0, EDI: 0x03f13640 EFL: 0x00010206, EIP: 0x00233080, CS: 0x00000008, DS: 0x01a70010 Error code: 0x00000000 Backtrace (CPU 0), Frame : Return Address (4 potential args on stack) 0x2e6ab998 : 0x12b4c6 (0x45f91c 0x2e6ab9cc 0x13355c 0x0) 0x2e6ab9e8 : 0x1ab0fe (0x469a98 0x233080 0xe 0x469248) 0x2e6abac8 : 0x1a1713 (0x2e6abae0 0x206 0x2e6abb78 0x233080) 0x2e6abad8 : 0x233080 (0xe 0x3e10048 0x4570010 0x96d0010) 0x2e6abb78 : 0x27866c (0x3f05df0 0x0 0x4ec4 0x3f136a0) 0x2e6abbc8 : 0x249d53 (0x3f13640 0x3e17464 0x55c160 0x3034ed5c) 0x2e6abdc8 : 0x24bb59 (0x3034ed00 0x28 0x9 0x0) 0x2e6abde8 : 0x270186 (0x2e6abe70 0x2e6abe44 0x8 0x0) 0x2e6abe68 : 0x22ca5f (0x3034ed00 0x3034ed00 0x2e6abea8 0xffffffff) 0x2e6abea8 : 0x21b36e (0x1e 0x3034ed00 0x246 0x0) 0x2e6abec8 : 0x217591 (0x3f65c04 0x1e 0x3034ed00 0x3ef2c2) 0x2e6abef8 : 0x217cea (0x530d64 0x4037808 0x3034ed40 0x2e6abf4c) 0x2e6abf68 : 0x217f1b (0x3f65c04 0x3034ed00 0x0 0x530de8) 0x2e6abfc8 : 0x1a14fc (0x530dc0 0x0 0x1a40b5 0x3dd95d0) Backtrace terminated-invalid frame pointer 0 BSD process name corresponding to current thread: kernel_task Mac OS version: 9L31a Kernel version: Darwin Kernel Version 9.8.0: Wed Jul 15 16:55:01 PDT 2009; root:xnu-1228.15.4~1/RELEASE_I386 System model name: MacBook4,1 (Mac-F22788A9) System uptime in nanoseconds: 30555146093771 unloaded kexts: com.apple.iokit.IOUSBMassStorageClass 2.0.8 - last unloaded 26709525128459 loaded kexts: com.vmware.kext.vmnet 2.0.5 com.vmware.kext.vmioplug 2.0.5 com.vmware.kext.vmci 2.0.5 com.vmware.kext.vmx86 2.0.5 com.apple.driver.iTunesPhoneDriver 1.0 - last loaded 981750246502 com.apple.iokit.IOUSBMassStorageClass 2.0.8 com.apple.filesystems.msdosfs 1.5.5 com.apple.iokit.IOBluetoothSerialManager 2.1.8f2 com.apple.filesystems.autofs 2.0.2 com.apple.driver.AppleHWSensor 1.9d0 com.apple.driver.AppleHDA 1.7.1a2 com.apple.driver.AppleUpstreamUserClient 2.7.5 com.apple.Dont_Steal_Mac_OS_X 6.0.3 com.apple.iokit.CHUDUtils 201 com.apple.iokit.CHUDProf 211 com.apple.driver.AppleIntelGMAX3100 5.4.8 com.apple.driver.AppleIntelGMAX3100FB 5.4.8 com.apple.driver.AppleHDAController 1.7.1a2 com.apple.iokit.IOFireWireIP 1.7.7 com.apple.driver.AppleIRController 113 com.apple.driver.AudioIPCDriver 1.0.6 com.apple.driver.ACPI_SMC_PlatformPlugin 3.4.0a17 com.apple.driver.AppleLPC 1.3.1 com.apple.driver.AppleBacklight 1.6.0 com.apple.driver.SMCMotionSensor 2.1.1d2 com.apple.driver.AppleUSBTrackpad 1.7.4f1 com.apple.driver.AppleUSBTCKeyEventDriver 1.7.4f1 com.apple.driver.AppleUSBTCKeyboard 1.7.4f1 com.apple.driver.CSRUSBBluetoothHCIController 2.1.8f2 com.apple.driver.AppleUSBMergeNub 3.4.6 com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.1.1 com.apple.iokit.SCSITaskUserClient 2.1.1 com.apple.driver.XsanFilter 2.7.91 com.apple.iokit.IOATAPIProtocolTransport 1.5.3 com.apple.iokit.IOAHCIBlockStorage 1.2.2 com.apple.driver.AppleUSBHub 3.4.9 com.apple.iokit.IOUSBUserClient 3.4.9 com.apple.driver.AppleAHCIPort 1.7.0 com.apple.driver.AppleIntelPIIXATA 2.0.1 com.apple.driver.AppleFWOHCI 3.9.7 com.apple.driver.AppleUSBEHCI 3.4.6 com.apple.driver.AppleEFINVRAM 1.2.0 com.apple.iokit.AppleYukon2 3.1.13b2 com.apple.driver.AirPortBrcm43xx 366.91.21 com.apple.driver.AppleUSBUHCI 3.3.5 com.apple.driver.AppleSmartBatteryManager 158.10.5 com.apple.driver.AppleRTC 1.2.3 com.apple.driver.AppleHPET 1.4 com.apple.driver.AppleACPIPCI 1.2.5 com.apple.driver.AppleACPIButtons 1.2.5 com.apple.driver.AppleSMBIOS 1.4 com.apple.driver.AppleACPIEC 1.2.5 com.apple.driver.AppleAPIC 1.4 com.apple.security.seatbelt 107.12 com.apple.nke.applicationfirewall 1.6.77 com.apple.security.TMSafetyNet 3 com.apple.driver.AppleIntelCPUPowerManagement 76.2.0 com.apple.driver.DiskImages 199 com.apple.BootCache 30.4 com.apple.iokit.IOSerialFamily 9.4 com.apple.driver.DspFuncLib 1.7.1a2 com.apple.iokit.CHUDKernLib 201 com.apple.iokit.IOHDAFamily 1.7.1a2 com.apple.iokit.IOAudioFamily 1.6.9fc5 com.apple.kext.OSvKernDSPLib 1.1 com.apple.driver.IOPlatformPluginFamily 3.4.0a17 com.apple.iokit.IONDRVSupport 1.7.3 com.apple.iokit.IOGraphicsFamily 1.7.3 com.apple.driver.AppleSMC 2.3.1d1 com.apple.iokit.IOUSBHIDDriver 3.4.6 com.apple.driver.AppleUSBBluetoothHCIController 2.1.8f2 com.apple.iokit.IOBluetoothFamily 2.1.8f2 com.apple.driver.AppleUSBComposite 3.2.0 com.apple.iokit.IOSCSIBlockCommandsDevice 2.1.1 com.apple.iokit.IOBDStorageFamily 1.5 com.apple.iokit.IODVDStorageFamily 1.5 com.apple.iokit.IOCDStorageFamily 1.5 com.apple.iokit.IOSCSIArchitectureModelFamily 2.1.1 com.apple.iokit.IOAHCIFamily 1.5.0 com.apple.iokit.IOATAFamily 2.0.1 com.apple.iokit.IOFireWireFamily 3.4.9 com.apple.iokit.IO80211Family 216.1 com.apple.iokit.IONetworkingFamily 1.6.1 com.apple.iokit.IOUSBFamily 3.4.9 com.apple.driver.AppleEFIRuntime 1.2.0 com.apple.iokit.IOSMBusFamily 1.1 com.apple.iokit.IOStorageFamily 1.5.6 com.apple.iokit.IOHIDFamily 1.5.5 com.apple.driver.AppleACPIPlatform 1.2.5 com.apple.iokit.IOACPIFamily 1.2.0 com.apple.iokit.IOPCIFamily 2.6 Macbook Black Mac OS X (10.5.8)

  Read the article

• Software development stack 2012

  A couple of months ago, I posted on Google+ about my evaluation period for a new software development stack in general. "Analysing existing 'jungle' of multiple applications and tools in various languages for clarification and future design decisions. Great fun and lots of headaches... #DevelopersLife" Surprisingly, there was response... ;-) - And this series of articles is initiated by this post. Thanks Olaf. The past few years... Well, after all my first choice of software development in the past was Microsoft Visual FoxPro 6.0 - 9.0 in combination with Microsoft SQL Server 2000 - 2008 and Crystal Reports 9.x - XI. Honestly, it is my main working environment due to exisiting maintenance and support plans with my customers, but also for new project requests. And... hands on, it is still my first choice for data manipulation and migration options. But the earth is spinning, and as a software craftsman one has to be flexible with the choice of tools. In parallel to my knowledge and expertise in the above mentioned tools, I already started very early to get my hands dirty with the Microsoft .NET Framework. If I remember correctly, I started back in 2002/2003 with the first version ever. But this was more out of curiousity. During the years this kind of development got more serious and demanding, and I focused myself on interop and integrational libraries and applications. Mainly, to expose exisitng features of the .NET Framework to Visual FoxPro - I even had a session about that at the German Developer's Conference in Frankfurt. Observation of recent developments With the recent hype on Javascript and HTML5, especially for Windows 8 and Windows Phone 8 development, I had several 'Deja vu' events... Back in early 2006 (roughly) I had a conversation on the future of Web and Desktop development with my former colleagues Golo Roden and Thomas Wilting about the underestimation of Javascript and its root as a prototype-based, dynamic, full-featured programming language. During this talk with them I took the Mozilla applications, namely Firefox and Thunderbird, as a reference which are mainly based on XML, CSS, Javascript and images - besides the core rendering engine. And that it is very simple to write your own extensions for the Gecko rendering engine. Looking at the Windows Vista Sidebar widgets, just underlines this kind of usage. So, yes the 'Modern UI' of Windows 8 based on HTML5, CSS3 and Javascript didn't come as any surprise to me. Just allow me to ask why did it take so long for Microsoft to come up with this step? A new set of tools Ok, coming from web development in HTML 4, CSS and Javascript prior to Visual FoxPro, I am partly going back to that combination of technologies. What is the other part of the software development stack here at IOS Indian Ocean Software Ltd? Frankly, it is easy and straight forward to describe: Microsoft Visual FoxPro 9.0 SP 2 - still going strong! Visual Studio 2012 (C# on latest .NET Framework) MonoDevelop Telerik DevCraft Suite WPF ASP.NET MVC Windows 8 Kendo UI OpenAccess ORM Reporting JustCode CODE Framework by EPS Software MonoTouch and Mono for Android Subversion and additional tools for the daily routine: Notepad++, JustCode, SQL Compare, DiffMerge, VMware, etc. Following the principles of Clean Code Developer and the Agile Manifesto Actually, nothing special about this combination but rather a solid fundament to work with and create line of business applications for customers.Honestly, I am really interested in your choice of 'weapons' for software development, and hopefully there might be some nice conversations in the comment section. Over the next coming days/weeks I'm going to describe a little bit more in detail about the reasons for my decision. Articles will be added bit by bit here as reference, too. Please bear with me... Regards, JoKi

  Read the article

• Surface development: it&rsquo;s just like software development

  - by Dennis Vroegop

  Surface is magic. Everyone using it seems to think that way. And I have to be honest, after working for almost 2 years with the platform I still get that special feeling the moment I turn on the unit to do some more work. The whole user experience, the rich environment of the SDK, the touch, even the look and feel of the Surface environment is so much different from the stuff I’ve been working on all my career that I am still bewildered by it. But… and this is a big but.. in the end we’re still talking about a computer and that needs software to become useful. Deep down the magic of the Surface unit there is a PC somewhere, running Windows Vista and the .net framework 3.5. When you write that magic software that makes the platform come alive you’re still working with .net, WPF/XNA, C#, VB.Net and all those other tools and technologies you know so well. Sure, the whole user experience is different from what you’ve known. And the way of thinking about users, their interaction and the positioning of screen elements requires a whole new paradigm. And that takes time. It took me about half a year before I had the feeling I got it nailed down. But when that moment came (about 18 months ago…) I realized that everything I had learned so far on software development still is true when it comes to Surface. The last 6 months I have been working with some people with a different background to start a new company. The idea was that the new company would be focussing on Surface and Surface only. These people come from a marketing background and had some good ideas for some applications. And I have to admit: their ideas were good. Very good. Where it all fell down of course is that these ideas need to be implemented in a piece of software. And creating great software takes skilled developers and a lot of time and money. That’s where things went wrong: the marketing guys didn’t realize and didn’t want to realize that software development is a job that takes skill. You can’t just hire a bunch of developers and expect them to deliver the best sort of software, especially not when it comes to Surface. I tried to explain that yes, their User Interface in Photoshop looked great, but no: I couldn’t develop an application like that in a weeks time. Even worse: the while backend of the software (WCF for communications, SQL Server for the database, etc) would take a lot more time than the frontend. They didn’t understand. It took them a couple of days to drawn the UI in Photoshop so in Blend I should be able to build the software in about the same amount of time. Well, you and I know that it doesn’t work that way. Software is hard to write, and even harder to write well, and it takes skill and dedication. It’s not something you can do as fast as you can draw a mock up for a Surface application in Photohop. The same holds true for web applications of course. A lot of designers there fail to appreciate the hard work that goes into writing the plumbing for a good web app that can handle thousands of users. Although the UI is very important, it’s not all there is to it. And in Surface development this is the same. The UI should create the feeling of magic, but the software behind it is what makes it come alive. And that takes time. A lot of time. So brush of you skills and don’t throw them away if you start developing for Surface. Because projects (and colaborations) can fail there as hard as they can in any other area of software development. On a side note: we decided to stop the colaboration (something the other parties involved didn’t appreciate and were very angry about) and decided to hire a designer for the Surface projects. The focus is back where it belongs: on the software development we know so well and have been doing very well for 13 years. UI is just a part of the whole project and not the end product. So my company Detrio is still going strong when it comes to develivering Surface solutions but once again from a technological background, not a marketing background.

  Read the article

• Ubuntu 12.04 problem with E160 huawei - can't detect the device and freezing system

  - by Matt

  I have just installed 12.04 and plugged in E160 and nothing happened - modem doesn't mount. I have found this solution : Ubuntu does not mount some Huawei devices due to bugs, problems etc. See if these work: 1st option: Connect the USB modem. After 10 seconds, type this in a terminal window: lsusb The output will be like this: Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 004: ID 12d1:140b Huawei Technologies Co., Ltd. Bus 004 Device 002: ID 413c:3016 Dell Computer Corp. Optical 5-Button Wheel Mouse Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 005: ID 0b97:7762 O2 Micro, Inc. Oz776 SmartCard Reader Bus 002 Device 004: ID 413c:8103 Dell Computer Corp. Wireless 350 Bluetooth Bus 002 Device 003: ID 0b97:7761 O2 Micro, Inc. Oz776 1.1 Hub Bus 002 Device 002: ID 413c:a005 Dell Computer Corp. Internal 2.0 Hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub The device is a Huawei modem, so let's look at the output. The relevant entry is: Bus 004 Device 004: ID 12d1:140b Huawei Technologies Co., Ltd Hence, you must type: sudo modprobe usbserial vendor=0x12d1 product=0x140b 2nd option Download usb-modeswitch and usb-modeswitch-data packages from packages.ubuntu.com. Install them through the command: sudo dpkg -i usb-modeswitch*.deb 3rd option Try a combination of both. but with no result. The modem is still not detected. I've tried to add a new connection but the system can't see my device in setup dialogue. Also I have noticed that when I open eg. terminal and try to type sth, the system freezes for a while.. Thanks for help!

  Read the article

• Ubuntu 12.04 problem with E160 huawei - can't detect the device nad freezing system

  - by Matt

  i just installed 12.04, plug in E160 and nothing happend - modem doesnt mount. i found this solution : Ubuntu does not mount some Huawei devices due to bugs, problems etc. See if these work: 1st option: Connect the USB modem. After 10 seconds, type this in a terminal window: lsusb The output will be like this: Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 004: ID 12d1:140b Huawei Technologies Co., Ltd. Bus 004 Device 002: ID 413c:3016 Dell Computer Corp. Optical 5-Button Wheel Mouse Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 005: ID 0b97:7762 O2 Micro, Inc. Oz776 SmartCard Reader Bus 002 Device 004: ID 413c:8103 Dell Computer Corp. Wireless 350 Bluetooth Bus 002 Device 003: ID 0b97:7761 O2 Micro, Inc. Oz776 1.1 Hub Bus 002 Device 002: ID 413c:a005 Dell Computer Corp. Internal 2.0 Hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub The device is a Huawei modem, so let's look at the output. The relevant entry is: Bus 004 Device 004: ID 12d1:140b Huawei Technologies Co., Ltd Hence, you must type: sudo modprobe usbserial vendor=0x12d1 product=0x140b 2nd option Download usb-modeswitch and usb-modeswitch-data packages from packages.ubuntu.com. Install them through the command: sudo dpkg -i usb-modeswitch*.deb 3rd option Try a combination of both. but with no result. Modem still is not detected. I've tried to add new conection but system can't see my device in setup dialogue. Also i noticed that when i open eg. terminal and try to type sth, system freeze for a while.. Thx for help!

  Read the article

• Search network device from LAN through my C++ application and change the IP address

  - by Arun Kumar K S

  I am developing an application in C++ to communicate with my network device. I used UDP classes to search the device from the network. I done the code in such a way that from my application a broadcast message will send to the local network. The device will respond to the broadcast message and the application will get the IP address from that response. After establishing a network communication send a message to the device for changing the IP address. That worked fine if my devices IP address is correct. But when I set a wrong IP address and subnet to the device. My application will never get any messages from the device. So I can't able communicate to the device and not able get the device and unable to change the IP address etc. Say example IP address of the device 20.1.1.1 Subnet Mask 255.0.0.0 And in my system that runs the application IP address 192.168.1.23 Subnet Mask 255.255.255.0 I tried the Lantronix device installation software with their Lantronix device in network. It listed the device from the network and I am able to change the IP address from their software. Any one know how this is done in this type of software? How I can search in network to find the device and change the IP address when its IP address is not in range? Which protocol they used to find the device?

  Read the article

• Component Development within SOA

  How do the concepts of component development work within SOA? Let’s first break this question down by defining what component development is. Component development is the process of implementing specific functionality in the form of small units of complied code that can be reused across multiple applications or product families. Typically, components are integrated with other components forming composite components. In general, most interaction between components is done through interfaces to promote loose coupling. The concept of loose coupling refers to the interconnections of components in a system so that their component dependences based on contracts defined by interfaces. A real life example of this can be experienced while using Legos to build a structure. If we consider each Lego block as a component, then when two more Legos are connected they form a composite component due to the fact that the structure is made up of multiple components.   It is important to note that composite components can be made from standard components and other composite components. Eventually as various components and composite components become interconnected a structure begins to form in the shape of an application or in the case of Legos in the form of Lego structure. Software components can loosely be defined as small units of related implemented functionality that can communicate with other components or may have dependencies on other components. Based on the definitions provide above, it is my personal opinion that SOA works well with the concepts of component development. The SOA architectural style focuses on creating loosely coupled services. Each service much like a component offers related functionality that can be accessed by various requesting clients.  In addition services can be derived just like components in that services can be built on other services to form composite services. In summary, the concepts of component development can work within SOA based on the example above.

  Read the article

• Essential management tools for a small/medium software development shop

  - by mikera

  I've recently started work with an organisation that is rapidly expanding and is recruiting or growing several development teams (including two web-based products and a data warehouse/BI team). They are basically working to agile methodologies but haven't formalised a standard way of working yet. Despite the fact that it is early days, I've been surprised by the lack of tools being used to manage the development processes (e.g. no issue tracker, no tool to manage the product backlog etc.) Although it's not my primary responsibility, I'd like to help them out with some recommendations on the most important tools they should get in place. What are the 3-5 top priority tools to establish for management of a good development shop? Why are they necessary? How do they improve the software development process, and how do I justify them to my bosses?

  Read the article

• career in Mobile sw/Application Development [closed]

  - by pramod

  i m planning to do a course on Wireless & mobile computing.The syllabus are given below.Please check & let me know whether its worth to do.How is the job prospects after that.I m a fresher & from electronic Engg.The modules are- *Wireless and Mobile Computing (WiMC) – Modules* C, C++ Programming and Data Structures 100 Hours C Revision C, C++ programming tools on linux(Vi editor, gdb etc.) OOP concepts Programming constructs Functions Access Specifiers Classes and Objects Overloading Inheritance Polymorphism Templates Data Structures in C++ Arrays, stacks, Queues, Linked Lists( Singly, Doubly, Circular) Trees, Threaded trees, AVL Trees Graphs, Sorting (bubble, Quick, Heap , Merge) System Development Methodology 18 Hours Software life cycle and various life cycle models Project Management Software: A Process Various Phases in s/w Development Risk Analysis and Management Software Quality Assurance Introduction to Coding Standards Software Project Management Testing Strategies and Tactics Project Management and Introduction to Risk Management Java Programming 110 Hours Data Types, Operators and Language Constructs Classes and Objects, Inner Classes and Inheritance Inheritance Interface and Package Exceptions Threads Java.lang Java.util Java.awt Java.io Java.applet Java.swing XML, XSL, DTD Java n/w programming Introduction to servlet Mobile and Wireless Technologies 30 Hours Basics of Wireless Technologies Cellular Communication: Single cell systems, multi-cell systems, frequency reuse, analog cellular systems, digital cellular systems GSM standard: Mobile Station, BTS, BSC, MSC, SMS sever, call processing and protocols CDMA standard: spread spectrum technologies, 2.5G and 3G Systems: HSCSD, GPRS, W-CDMA/UMTS,3GPP and international roaming, Multimedia services CDMA based cellular mobile communication systems Wireless Personal Area Networks: Bluetooth, IEEE 802.11a/b/g standards Mobile Handset Device Interfacing: Data Cables, IrDA, Bluetooth, Touch- Screen Interfacing Wireless Security, Telemetry Java Wireless Programming and Applications Development(J2ME) 100 Hours J2ME Architecture The CLDC and the KVM Tools and Development Process Classification of CLDC Target Devices CLDC Collections API CLDC Streams Model MIDlets MIDlet Lifecycle MIDP Programming MIDP Event Architecture High-Level Event Handling Low-Level Event Handling The CLDC Streams Model The CLDC Networking Package The MIDP Implementation Introduction to WAP, WML Script and XHTML Introduction to Multimedia Messaging Services (MMS) Symbian Programming 60 Hours Symbian OS basics Symbian OS services Symbian OS organization GUI approaches ROM building Debugging Hardware abstraction Base porting Symbian OS reference design porting File systems Overview of Symbian OS Development – DevKits, CustKits and SDKs CodeWarrior Tool Application & UI Development Client Server Framework ECOM STDLIB in Symbian iPhone Programming 80 Hours Introducing iPhone core specifications Understanding iPhone input and output Designing web pages for the iPhone Capturing iPhone events Introducing the webkit CSS transforms transitions and animations Using iUI for web apps Using Canvas for web apps Building web apps with Dashcode Writing Dashcode programs Debugging iPhone web pages SDK programming for web developers An introduction to object-oriented programming Introducing the iPhone OS Using Xcode and Interface builder Programming with the SDK Toolkit OS Concepts & Linux Programming 60 Hours Operating System Concepts What is an OS? Processes Scheduling & Synchronization Memory management Virtual Memory and Paging Linux Architecture Programming in Linux Linux Shell Programming Writing Device Drivers Configuring and Building GNU Cross-tool chain Configuring and Compiling Linux Virtual File System Porting Linux on Target Hardware WinCE.NET and Database Technology 80 Hours Execution Process in .NET Environment Language Interoperability Assemblies Need of C# Operators Namespaces & Assemblies Arrays Preprocessors Delegates and Events Boxing and Unboxing Regular Expression Collections Multithreading Programming Memory Management Exceptions Handling Win Forms Working with database ASP .NET Server Controls and client-side scripts ASP .NET Web Server Controls Validation Controls Principles of database management Need of RDBMS etc Client/Server Computing RDBMS Technologies Codd’s Rules Data Models Normalization Techniques ER Diagrams Data Flow Diagrams Database recovery & backup SQL Android Application 80 Hours Introduction of android Why develop for android Android SDK features Creating android activities Fundamental android UI design Intents, adapters, dialogs Android Technique for saving data Data base in Androids Maps, Geocoding, Location based services Toast, using alarms, Instant messaging Using blue tooth Using Telephony Introducing sensor manager Managing network and wi-fi connection Advanced androids development Linux kernel security Implement AIDL Interface. Project 120 Hours

  Read the article

• Can a Guy with Embedded System Background go into Game Development

  - by NANDAGOPAL

  Well, I finished my Masters in Embedded Systems, and I am working in GUI development, and working with graphic tools and images and GUI's keep me glued to my seat more than working on code for MUP/MUC . And I want to give game development a Fair chance, try out developing a game from scratch using basic libraries then tryout the same in a free/open source game engine and there is a good chance I may fall in love with it, but it is poissible for a person with an Electrical and Electronics Bachelors and Embedded Systems Masters ( just a years experience in the field) go into game development and be successful in the profession. And I asked the same question @ stackoverflow.com (wrong place to ask ) http://stackoverflow.com/questions/13794822/can-a-guy-with-embedded-system-background-go-into-game-development/13794943#13794943 And I received good but a very generic answer. I would be happy to know the actual pro's and con's of a master's in embedded systems migrating to Game Dev

  Read the article

• Best Programming Language for Web Development

  - by Harish Kurup

  I am a Web Developer in PHP, and also know Javascript and some bit of CSS which is needed for web development. I use Symfony framework to build Websites and Web Application. As now i want to learn new Programming Language, which is best for Web Development(like Ruby, Python), as i have heard about Frameworks like Rails and Django. Which language will be best for Web Development apart from PHP or like PHP?

  Read the article

• MBO in software development

  - by Euphoric

  I just found out our middle sized software development company is going to implement MBO. As a big fan of Agile, I see this as counter-intuitive, because I believe it is impossible to create a objective, that is measurable. Especialy where creativity, experience, knowledge and profesionalism are important traits and expanding those are objectives and goals of many. So my question is, what is your opinion on using MBO in software development? And if there are development companies using MBO, either successfuly or unsucessfuly.

  Read the article

• Sound driver for motherboard gigabyte ga-g1975x-c (Creative Sound Blaster Live 24-bit) (alsa, ca0106)

  - by Mikl

  My motherboard is gigabyte ga-g1975x-c with integrated audio "Creative Sound Blaster Live 24-bit". I have installed Ubuntu 10.10, and there was no sound at all. Alsa drivers was already installed. Finally after long searching, i have found how to make my sound work. /etc/modprobe.d/alsa-base.conf: options snd-ca0106 subsystem=0x10121102 //i have added this line and restart After restarting my speakers and microfon works fine. Maybe somebody knows different/better subsystem code for my sound card???

  Read the article

• USB external drive is not recognized by any OS, how to troubleshoot in Ubuntu?

  - by Breno

  First of all I would like to inform you that I saw a question similar to mine but the error was different, so here's my problem... I have an external HD samsung s2 model of 500GB and a day to day just stopped working, tried in other systems (windows and mac) however are not recognized. In the windows device manager when I insert the usb it states that the device in question are not working properly. Well, in the logs of my ubuntu 4.12 I see the following message when I insert my usb device in: [ 2967.560216] usb 7-2: new full-speed USB device number 2 using uhci_hcd [ 2967.680182] usb 7-2: device descriptor read/64, error -71 [ 2967.904176] usb 7-2: device descriptor read/64, error -71 [ 2968.120227] usb 7-2: new full-speed USB device number 3 using uhci_hcd [ 2968.240207] usb 7-2: device descriptor read/64, error -71 [ 2968.464063] usb 7-2: device descriptor read/64, error -71 [ 2968.680087] usb 7-2: new full-speed USB device number 4 using uhci_hcd [ 2969.092085] usb 7-2: device not accepting address 4, error -71 [ 2969.208155] usb 7-2: new full-speed USB device number 5 using uhci_hcd [ 2969.624076] usb 7-2: device not accepting address 5, error -71 [ 2969.624118] hub 7-0:1.0: unable to enumerate USB device on port 2 [ 4520.240340] usb 7-1: new full-speed USB device number 6 using uhci_hcd [ 4520.364079] usb 7-1: device descriptor read/64, error -71 [ 4520.588109] usb 7-1: device descriptor read/64, error -71 [ 4520.804140] usb 7-1: new full-speed USB device number 7 using uhci_hcd [ 4520.924136] usb 7-1: device descriptor read/64, error -71 [ 4521.148083] usb 7-1: device descriptor read/64, error -71 [ 4521.364105] usb 7-1: new full-speed USB device number 8 using uhci_hcd [ 4521.776237] usb 7-1: device not accepting address 8, error -71 [ 4521.888206] usb 7-1: new full-speed USB device number 9 using uhci_hcd [ 4522.296102] usb 7-1: device not accepting address 9, error -71 [ 4522.296150] hub 7-0:1.0: unable to enumerate USB device on port 1 [ 4749.036104] usb 7-2: new full-speed USB device number 10 using uhci_hcd [ 4749.156209] usb 7-2: device descriptor read/64, error -71 [ 4749.380215] usb 7-2: device descriptor read/64, error -71 [ 4749.596206] usb 7-2: new full-speed USB device number 11 using uhci_hcd [ 4749.716409] usb 7-2: device descriptor read/64, error -71 [ 4749.940110] usb 7-2: device descriptor read/64, error -71 [ 4750.156257] usb 7-2: new full-speed USB device number 12 using uhci_hcd [ 4750.572150] usb 7-2: device not accepting address 12, error -71 [ 4750.684215] usb 7-2: new full-speed USB device number 13 using uhci_hcd [ 4751.100182] usb 7-2: device not accepting address 13, error -71 [ 4751.100224] hub 7-0:1.0: unable to enumerate USB device on port 2 Here is my system: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 002: ID 08ff:2810 AuthenTec, Inc. AES2810 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02) 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 02) 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 92) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 02) 00:1f.2 IDE interface: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 2 port SATA Controller [IDE mode] (rev 02) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02) 00:1f.5 IDE interface: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 2 port SATA Controller [IDE mode] (rev 02) 02:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ba) 02:01.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 04) 02:01.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 21) 09:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5756ME Gigabit Ethernet PCI Express 0c:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01) Does anyone have any clue what would be the problem?

  Read the article

• Future of web development - Front-end > Back-end development?

  - by Jasson

  People used to say it's "better"/"Make more money" to do back-end programming (PHP, asp.net) instead of front-end(HTML, javascript) for web development. But I notice that HTML5, CSS3, WebGL, Javascript are gaining importance. We can even use HTML5, CSS3 and JAVASCRIPT for building mobile web applications(For both iphone/android) and even Windows 8 applications in the future! Does it mean new web developers should now focus on front-end development instead of server-side development?

  Read the article

• How do I install a Wimax usb driver?

  - by kakaz

  I am using wimax usb modem in Ubuntu 9.04 properly. I am familiar with Ubuntu 10.04 and try to install the same deb file to use my wimax USB modem, but it could not install and give me the following error message: $ sudo dpkg -i green-packet-wimax-usb_i386.iso.deb (Reading database ... 206628 files and directories currently installed.) Preparing to replace green-packet-wimax-usb 1.12 (using green-packet-wimax- usb_i386.iso.deb) ... /var/lib/dpkg/info/green-packet-wimax-usb.prerm: 45: /etc/init.d/wimaxd: not found Removing any system startup links for /etc/init.d/wimaxd ... FATAL: Module mt7118_usb_os not found. Unpacking replacement green-packet-wimax-usb ... Setting up green-packet-wimax-usb (1.12) ... FATAL: Error inserting mt7118_usb_glue (/lib/modules/2.6.32-28-generic/kernel/drivers/net/mt7118_usb_glue.ko): Invalid module format dpkg: error processing green-packet-wimax-usb (--install): subprocess installed post-installation script returned error exit status 1 Processing triggers for ureadahead ... Processing triggers for desktop-file-utils ... Processing triggers for python-gmenu ... Rebuilding /usr/share/applications/desktop.en_US.utf8.cache... Processing triggers for libc-bin ... ldconfig deferred processing now taking place Processing triggers for python-support ... Errors were encountered while processing: The error (Line 9) give me some clue that the mt7118_usb_glue.ko kernel object can't insert it. So, I think this may be due to it's kernel dependencies. Can anybody tell me how I can install this kernel object to my new Ubuntu 10.04 kernel?

  Read the article

• Samsung driver for notebooks in Natty?

  - by burli

  Hi, I have a Samsung N150 Netbook and I installed Unity 11.04 to make some tests. But some functions do not work like backlight and vertical scroll on the touchpad. There are drivers for samsung notbooks and I know that there is a PPA. But not for Natty. Will the drivers be avalible some day in the kernel by default? Will Canonical add these drivers in the kernel, if the Kernel developers wont? I think this would be very usefull because Unity is great for Netbooks and Samsung Netbooks are really nice.

  Read the article

• Davicom DM9601 USB LAN NIC Ubuntu 11.10 issue

  - by Gaurav_Java

  I have a davicom dm9601 USB ethernet card. When I plug in the device, it is detected and drivers are loaded, but I can't connect to internet using it. It works perfectly on XP, other laptop but not working on Ubuntu 11.10 How can I install the driver for this? I have tried many things But nothing is working. If I go to this link driver but not compiling or may I be doing something wrong. I found this one but don't know how to follow these steps . This is my lsusb output: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 004: ID 064e:a103 Suyin Corp. Acer/HP Integrated Webcam [CN0314] Bus 003 Device 002: ID 08ff:1600 AuthenTec, Inc. AES1600 Bus 005 Device 002: ID 0a46:9601 Davicom Semiconductor, Inc. DM9601 Fast Ethernet Adapter Bus 006 Device 002: ID 046d:c045 Logitech, Inc. Optical Mouse Bus 003 Device 003: ID 0a5c:2101 Broadcom Corp. Bluetooth Controller Bus 004 Device 002: ID 04d9:1702 Holtek Semiconductor, Inc. But when I connected my Internet from different system its start working.

  Read the article

• PL2303X driver for ubuntu

  - by kam

  I have 2 questions I hope someone is able to help me. I bought a usb/serial adapter based on PL2303X and not PL2303. 1- Do you know of any patches to make the PL2303X detectable and functional? 2- Assuming I got the patch, and before I apply it, I wanted to upgrade my kernel. I found this website http://www.unixmen.com/upgrade-your-kernel-the-safe-way-in-ubuntu-linuxmint/ to teach me to do so.. Is this a good procedure? and to what version you advise me to upgrade? Thanks.

  Read the article

• Does C# have a future in games development?

  - by IbrarMumtaz

  I recently learned that the MMO Minecraft is powered by Java from a recent interview on CVG.co.uk on a possible collaboration between two former and now competing colleagues. In the interview he bluntly said that the founder of Minecraft is a Java coder and he is a C or C++ coder so they are incompatible with each other. So collaborating on future projects will be difficult. This got me thinking, If Java could do that? What does the future hold for MS very popular C# language and .Net platform as far as games or mainstream games development is concerned?

  Read the article

• Beginners' Guide to Development

  - by Bombillazo

  Hello. So I have some experience programming in Java, and at the moment I am learning how to use Python. I have read on the process of game design and such. I also have media covered, got experience with graphics and audio. My question is geared more towards the actual tools to use for making games, developing. I am willing to commit to a long term development cycle, as I will be doing this as a hobby. I've heard of Flash, Gamemaker, etc. I don't intend to create my own Game Engine, so I was looking for a platform that is extensible and easy to program with an OOP mind frame. As a plus it would be great of said game could be played directly from a website. TIA!

  Read the article

• Best way to start Game development? [on hold]

  - by SupSon ?

  I'm a web developer. I got skills in PHP, CSS HTML. I also have a little bit of knowledge about JS. I want to get into game development to be a better programmer overal. I just want to start by making a simple platform game. Some kind of very simple mario clone. What is the best way to start the process of gamedevelopment? I know code is just code, but when thinking about starting my own little game, i do not exactly know where to start looking. Some opinions on this would be awsome!

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >