Search Results

Search found 229 results on 10 pages for 'evan teran'.

Page 5/10 | < Previous Page | 1 2 3 4 5 6 7 8 9 10  | Next Page >

• BIOS not detecting working SATA hard drive.

  - by Evan

  Some time ago my power supply died. It's a long story from then till now, but the important bit is that I ended up with a new hard drive and a new power supply. I tested to see if my original hard drive was still alive, and it booted and worked perfectly until I turned it off. When I started it again it would not boot. I bought new SATA cables, assuming that the one I had was not seating properly (it was cheap and wobbly), but no dice. Upon start-up I am presented with a message telling me to insert boot media into the selected drive or add a drive and restart. Neither the new or the old drive is detected by BIOS, my Vista install disk, or from my bootable Linux USB drive. When I remove all of the RAM the computer ceases outputting visual information, and upon reinstalling the ram and starting up again gives me a "failed overclock" error. So, does anyone have an idea as to what might be going on? I'm completely lost at this point.

  Read the article

• Errors generating gpg keypair

  - by Evan Lynch

  I posted this originally on stackoverflow, but was told that it was offtopic and this would be the better place to post it, so I am reposting it here and deleting my original topic. I have a rather old PGP key, but I've long ago lost the private key for it, so I'm trying to generate a new key with GPG on Windows 7. While it technically generates the key, GPA crashes every time I generate the keypair. I've tried this four times now and just downloaded what appears to be the latest version of Gpg4Win and am still receiving this problem. A comment on my original post informed me that GPA crashes is not a very good description of the problem, but unfortunately I can't do much better than that: all it tells me is "gpa.exe has crashed and will close now", I don't get an error dump or anything. Is there anything I can do to fix this, or is this just a bug in the latest version of Gpg4Win? Here are the specs of GPG that I'm using: GPA 0.9.4. GnuPG 2.0.22. My operating system is Windows 7 64 Bit, and I have 5 GB of RAM. Also, I was told to try generating the keypair on the command line but can't find any documentation for how to do this in Windows 7. If anyone could link me to current documentation for this, that would be a good workaround for solving this problem.

  Read the article

• How do I get around "Access is Denied" [Number: 5 (0x80070005)], with IIS6/FastCGI and PHP 5.2.3?

  - by Evan Carroll

  I'm getting this error with IIS 6.0 (i assume), and PHP 5.2.3, and FastCGI FastCGI Error The FastCGI Handler was unable to process the request. Error Details: Error Number: 5 (0x80070005). Error Description: Access is denied. HTTP Error 500 - Server Error. Internet Information Services (IIS) Any ideas, nothing revealings in logs (other than 500 errors), this is pretty much all of I have to work with. The script has read and execute privileged for the internet guest account; and, I've added read/execute privileges to the whole D:\PHP. I followed this tutorial http://learn.iis.net/page.aspx/247/using-fastcgi-to-host-php-applications-on-iis-60/ to set it up. The only major diversion is I installed PHP to D:\PHP

  Read the article

• Which one is better deal: iPed or Apple iPad?

  - by Evan Carroll

  The Chinese knockoff iPed is now in the wild and receiving a lot of attention? Does anyone know how the Android distribution it ships with compares with Apple iPad's software pack? How does the look-and-feel of the iPed fit with the Apple iPad? Quite frankly, I have little interest in Apple products because of the company policy. But, cheaper comparable hardware running open-source software is pretty interesting... Anything useful to add.. Here are the Apple iPad specs for comparison. The iPed is priced at $199.00, the Apple iPad starts at $499.00 .

  Read the article

• How do I create DNS entries for EC2 instances created by Auto Scaling?

  - by Evan

  I'm looking into using auto scaling groups for a tier of webservers that would be fronted by an ELB. One of the things I'm having a hard time with is how to give each new instance the proper DNS name. For example, I'd like webservers to have names like frontend-web-XXX.prod.example.com so their names would appear correct in logs and just ease of organization. I have two other tiers I'd ultimately like to make autoscaled and I'd like them to have names like api-web-XXX.prod.example.com as well. I have some experience with cloudformation templates and have spun up individual instances with associated Route53 records but I don't see any indication of how this can be done within an autoscaled group.

  Read the article

• Alternatives to Citrix GoToAssist ?

  - by Evan Carroll

  Citrix GoToAssist is a really nifty little web application for customer support that allows you to take control of someones OSX, or Windows machine. Essentially, it works likes this: You log in to your management console You get a code You give them a code, and a website (fastsupport.com) They go there and enter in the code They accept the browser applet which installs a program on their computer You have control of their desktop You can see their desktop, configure applications, etc. They can also see when you disconnect. It is really rather nifty, but it doesn't support Linux and it is rather expensive (660$ a year). Does anyone know of any alternatives to this? I'm looking for a solution as simple on the user as this one, that doesn't require firewall configuration or setting up ssh/vnc/rdesktop etc.

  Read the article

• Why doesn't my PHP install see the MySQL extension?

  - by Evan Padd

  So I just set up PHP (Version 5.2.17), MySQL (5.5.28), and Apace (2.2) on my Windows 7 computer. I want to test a mysql connection, but the mysql extension is apparently not loaded (based on phpinfo()). Here's what I did: Changed the extension dir in the php.ini (extension_dir = ".;c:\php\ext") and uncommented the extension=php_mysql.dll line Copied libmysql.dll to the Apache's bin directory Added C:\php to the system's $PATH Restarted the server, then the computer And it's still not working. What did I miss? EDIT: I'm looking through phpinfo()'s outout and it says: "Server API | Apache 2.0 Handler" and I'm running 2.2. Is that a problem?

  Read the article

• How do I :split a window if the window already has been :vsplit?

  - by Evan Carroll

  Let's say you open two files through a vertical split.. vim -O 1 2 Now how would I split this window horizontally across both of the vertical windows? So this is what a :vsplit looks like: ----------------- | | | | | | | | | | | | | | | | | | ----------------- I want the end result to look like ----------------- | | | | | | | | | ----------------- | | | | | | -----------------

  Read the article

• When is a secondary nameserver hit?

  - by Evan Carroll

  Take this scenario: domain: foobar.com ns1: 2.2.2.2 ns2: 3.3.3.3 My question: Is ns2 hit just in the event that ns1 is down? Or, is ns2 hit any time that ns1 returns a miss/doesn't resolve the query? I know ns2 would be hit if ns1 ever went down; but, what if ns1 is up and just doesn't have the data?

  Read the article

• Strange mysql problem moving website from Ubuntu server to Mac server

  - by evan

  I'm moving a website (php/mysql) from an Ubuntu server to a OSX 10.6 server. I've set up apache to run php scripts and setup the newest version of mysql on the mac. I just copied all of the php files and dumped/imported all of the mysql databases (including the mysql users database). When I visit the page being served on the Mac the page is able to connect to the database, but not query. Specifically this function mysql_error() is returning this error message NO SUCH FILE OR DIRECTORY The reason it's strange is that I'm able to change the php connection strings for mysql on the Ubuntu server so that it points to the Mac server and the page works correctly (so it seems mysql is correctly set up on the mac and definitely contains all of the users and tables it should). Thinking it was something to do with file permissions on the mac, I've changed all of the files 755 and it hasn't helped. Any ideas? Thanks!! UPDATE: I've found this error which I'm relatively certain is related to this problem in /var/log/apache2/error_log PHP Warning: mysql_query(): A link to the server could not be established

  Read the article

• Licensing SQL Server 2012 Reporting Services w/ SharePoint 2010

  - by Evan M.

  Here's my situation: I have 1 VM that is running SharePoint 2010 SP1. I have a different physical server that is running SQL Server 2008 R2 that hosts all the configuration and content database for SharePoint. Now, we want to start providing BI capabilities to our users with SharePoint and SQL Server. With it's new features, 2012 is the obvious way to go. To support this, I'm looking to build a new VM that will have SQL Server 2012 installed w/ Analysis services and SSIS, which will be the platform that gets our data from our Oracle databases, puts it in a warehouse hosted by the SQL 2012 instance, and is put into cubes. What's getting me about the platform is licensing for Reporting Services and PowerPivot. My plan was to install SSRS and PowerPivot on the current SharePoint server. But my understanding of the licensing means that instead of the new SQL server being licensed, I'd have to license both new server, and the SharePoint server. Conversely, I could install SharePoint onto the SQL server, and only have to get a second SP license, but then I'd have the added complexity of deploying a separated application server, and combines my data and application servers. Is my licensing understanding correct, or can I have SSRS and PowerPivot installed separately without incurring additional licensing costs?

  Read the article

• Processor upgrade on a laptop vs. Ram upgrade. Also does ram always matter?

  - by Evan

  I have a Dell Inspiron 14r (N4110) with an Intel Core i3 and 4gb of ram. It runs very smoothly, however gaming on this laptop is very limited. This is mostly because of integrated graphics but i have seen a computer with a Core i5, and very similar specs otherwise, run games that the N4110 cannot. This other computer has integrated graphics and 6gb of ram. I am wondering whether upgrading ram or upgrading the processor make the most difference in performance. Which setup would get better performance, an i5 with 4gb of ram or an i3 with 8 gb of ram? (Both with integrated graphics) Also, is there a certain point at which you have too much ram for the computer to ever possibly use? For instance is there really any difference in performance between 8 gb and 16 gb of ram?

  Read the article

• Upgrade to Q9550 or i7 920 on a budget?

  - by evan

  I'm planning to upgrade my computer and torn between maxing out the system I have or investing in the X58 architecture. I'm currently using a E6600 Core 2 Duo with 4GB of RAM (800mhz) on an Asus PK5-E motherboard which I built two years ago. My original plan was that one day I'd upgrade machine to 8GB (1066mhz, the max the PK5-E allows) and to the Core 2 QuadQ9550 to give the machine a good four years of life. However, that was before the i7 came out. I use my computer mainly for software development , which I do inside Virtual Machines, and the i7 seems ideal for that because it no longer is limited by the speed of the FSB? And when I looked into it, getting 8GB DDR3 RAM isn't much more expensive than the 8GB of DDR2 and the i7 920 is comparable in price to the Q9550, which doesn't make much sense to me? So the question is it worth swapping the motherboard out for around $250 and upgrading all three components or using that money on SSD or 10rpm drive for the existing system's OS/Apps/Virtual Machine drive? Or just put the $250 towards a completely new machine in a year or two? Would the i7 really give that much of boost compared to the Q9550 for what I'd be using it for? Thanks in advance for your input!!!

  Read the article

• Configuring nginx to check for hard files in only a few directories,

  - by Evan Carroll

  For a node.js project I'm doing, I have a tree like this. +-- public ¦   +-- components ¦   +-- css ¦   +-- img +-- routes +-- views Essentially, I have the root to be set to public. I want all requests destined to /components/ /css/ /img/ To check to see if their appropriate destinations exist on disk. However, I don't want requests to other directories to even run an IO operation, /foo/asdf /bar /baz/index.html None of those should result in the disk being touched. I have a stansa that does the proxy to node.js, location @proxy { internal; proxy_set_header Host $http_host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header X-NginX-Proxy true; proxy_pass http://localhost:3030; proxy_redirect off; } I just would like to know how to arrange this. My problem would be easily solved if try_files took a single argument, but it always wants a file first. location /components/ { try_files $uri, @proxy } location /css/ { try_files $uri, @proxy } location /img/ { try_files $uri, @proxy } However, there is nothing that I can find that will give me, location / { try_files @proxy } How do I get the effect I want?

  Read the article

• X Error of failed request: BadMatch (invalid parameter attributes) ffmpeg error

  - by Evan Carroll

  I'm getting the following error message in ffmpeg: X Error of failed request: BadMatch (invalid parameter attributes) Major opcode of failed request: 140 (MIT-SHM) Minor opcode of failed request: 4 (X_ShmGetImage) Serial number of failed request: 11 Current serial number in output stream: 11 I turns up when I run the bash function mentioned in a forum post about streaming in Linux. What does it mean and how can I fix it?

  Read the article

• Free Windows alternatives to Sibelius or Finale (Music Composition)

  - by Evan

  I'm taking a music composition course and it's highly recommended we grab some software for music composition, the two most popular being Sibelius and Finale. They aren't overly pricey, as both have student versions, but I was wondering if anyone knew of some good free music composition programs. Thanks

  Read the article

• Extracting a .zip file into Program Files (x86)

  - by Evan

  I just got 64 bit Vista system after being on Windows XP. I'm trying to get all my useful programs up to date, and I've recently had a problem extracting files into the 32-bit program files directory (Program Files (x86)). I'm using 7zip to extract the eclipse-SDK-3.5-win32.zip directory into C:\Program Files (x86) Unfortunately, every time I've tried to do this, 7Zip reports can not open output file C:\Program Files (x86)\eclipse\... I've been able to extract it to C:\ and then move it, I'm assuming there's some protection on the Program Files directory that is causing some problems. Any suggestions?

  Read the article

• Benchmark virtual machines?

  - by evan

  I'm looking for a good way to benchmark the performance of Ubuntu machines (preferably from the command line - only care about harddrive speed, memory, and cpu - not graphics). Are there any programs that could also be used on Mac or Windows so I could compare the results against an Apple or PC Desktop? Ultimately I'd like to use these benchmarks to compare different virtual machine configurations (speeds on different hosts and different hardware to get practical idea of the differences between different setups a rigs). Thanks!

  Read the article

• VIM Window panes changing orientation

  - by Evan Carroll

  How can I go from a formation like this .......................................................... . . . . . . . 3 . . . . . . . . .............................. 1 . . . . . . . . 2 . . . . . . . . . . . .......................................................... to one like this .......................................................... . . . . . 3 . . . . . .......................................................... . . . . . . . . . . 2 . 1 . . . . . . . . . . ..........................................................

  Read the article

• Domain Driven Design And The Entity Framework

  - by Hossein

  hi, I'm new to DDD and i want to use entity framework v4.0 (shipped with .net 4.0) in my new project. since i have few time to learn DDD and entity framework, which books are good for me to read first?! i'm going to first read Domain-Driven Design Tackling Complexity in the Heart of Software by Eric Evan and next Pro Entity Framework 4.0 (Apress Scott Klein)... the problem here is Eric Evan's book is too abstract,I want to know if the Pro Entity framework 4.0 is complete enough i just skip the first book! in the end recommend me some good books in DDD and Entity Framework Thanks

  Read the article

• Daily tech links for .net and related technologies - May 10-12, 2010

  - by SanjeevAgarwal

  Daily tech links for .net and related technologies - May 10-12, 2010 Web Development jQuery Templates and Data Linking (and Microsoft contributing to jQuery) - ScottGu ASP.NET MVC and jQuery Part 4 – Advanced Model Binding - Mister James Creating an ASP.NET report using Visual Studio 2010 - Part 1 & Part 2 & Part 3 - rajbk Caching Images in ASP.NET MVC -Evan How to Localize an ASP.NET MVC Application - mikeceranski Localization in ASP.NET MVC 2 using ModelMetadata - Raj Kiamal Web Design...(read more)

  Read the article

• Daily tech links for .net and related technologies - May 13-16, 2010

  - by SanjeevAgarwal

  Daily tech links for .net and related technologies - May 13-16, 2010 Web Development Integrating Twitter Into An ASP.NET Website Using OAuth - Scott Mitchell T4MVC Extensions for MVC Partials - Evan Building a Data Grid in ASP.NET MVC - Ali Bastani Introducing the MVC Music Store - MVC 2 Sample Application and Tutorial - Jon Galloway Announcing the RTM of MvcExtensions - kazimanzurrashid Optimizing Your Website For Speed Web Design Validation with the jQuery UI Tabs Widget - Chris Love A Brief History...(read more)

  Read the article

• Google I/O 2012 - Google Compute Engine -- Technical Details

  Google I/O 2012 - Google Compute Engine -- Technical Details Joe Beda, Evan Anderson This session will provide an in depth overview of Google Compute Engine. Google Compute provides Virtual Machines optimized for large scale data processing and analytics. We will dive into the core concepts, API, unique features and architectural best practices in the context of concrete examples. For all I/O 2012 sessions, go to developers.google.com From: GoogleDevelopers Views: 2497 88 ratings Time: 01:01:39 More in Science & Technology

  Read the article

• Updating a progress bar while wpf data binding is taking place (in c#)

  - by evan

  I bind a large dataset to a WPF list box which can take a long time (more than ten seconds). While the the data is being bound I'd like to display a circular progress bar I can't get the progress bar to show while the data binding is occurring, even though I am trying to do the binding in a backgroundworker. I tested it by making the first line of the backgroundworkd's dowork event a Thread.Sleep(5000) and sure enough the progress bar started spinning for that duration only to freeze while when the binding started. Is this because both the databinding and the UI updating have to occur on the same thread? Any ideas on how to work around it? Thanks for your help!!

  Read the article

• When overriding initWithCoder is it always necessary to call [super initWithCoder: coder]

  - by Evan

  In this code I am loading a View Controller (and associated View) from a .xib: -(id)initWithCoder:(NSCoder *)coder { [super initWithCoder:coder]; return self; } This successfully works, but I do not really understand what the line [super initWithCoder:coder] is accomplishing. Is that initializing my View Controller after my View has been initialized? Please be as explicit as possible when explaining. Thanks.

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10  | Next Page >