Search Results

Search found 3695 results on 148 pages for 'failure'.

Page 5/148 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• UEFI/GPT Win 7 Load Failure in Dual Boot and no GRUB2 [Ubuntu 12.04]

  - by cristian_jordache

  Configuration: MBB: ASRock X79 Extreme6 Win 7 installed on a INTEL 40GB SSD (GPT partitioned) Ubuntu 14.04 on a CORSAIR 30GB SSD (Ext4 and SWAP) I had Windows 7 installed previously in UEFI mode, using 3 partitions (GPT) and works fine if left alone. In UEFI BIOS settings I can see sometimes a "Windows Boot Manager" and other times (?) a "UEFI Intel" entry for INTEL HDD and Windows will boot properly selecting the one available at that time. I installed Ubuntu 14.04 after Win 7 w/o changing any UEFI BIOS settings and it works fine only if the BIOS is set w/ the Ubuntu partition as the first drive to boot, in AHCI mode. If both SSD drives are connected, the Win7 Intel boot drive can be chosen as first boot device but only as an "AHCI Intel drive" (No "Windows Boot Manager" nor "UEFI Intel device" options available in BIOS Boot menu) and Win7 will not load properly as long as the Ubuntu Crucial SSD is NOT PHYSICALLY DISCONNECTED. Windows will try, start booting for few seconds but will fail replacing Win7 logo and that startup animation with w/ the "old" white progress bar and then and will notify that there is a issue and prompt the user to try to Load Win 7 in Normal Mode again or try a Recovery Mode to fix it. If I let Windows INTEL HDD boot via BIOS/UEFI - Windows Boot manager selection, I may see the purple screen of Grub2 loaded for a while, but there's no selection for Ubuntu or Windows and/or then machine is not booting, showing a black screen and a small command prompt cursor blinking on top. So far the only option I see to have Ubuntu boot side by side w/ Win 7 is to reformat the Win7 SDD and set it boot in legacy BIOS mode with a MBR instead of GPT. Per my understanding this is a quite complex issue to fix (Rod Smith's answer was pretty helpful: UEFI boot on my Asus k52f) but any other suggestions are welcome. I find a bit odd that I can boot properly Windows7 SSD or an Ubuntu DVD using a DVD drive set in UEFI-BIOS in "AHCI mode" and w/ using "UEFI/Windows Boot Manager" booting option but I cannot boot a secondary SSD-HDD w/ Ubuntu having the same BIOS/UEFI Boot configuration. Looks like plugging the second SSD [the Ubuntu partition] is interfering with boot options in UEFI-BIOS.

  Read the article

• gnupg make failure

  - by zhoucengchao

  I got errors as below when tried to make gnupg 2.0.19 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ compress.o: In function `init_uncompress': /home/steve/Desktop/gnupg-2.0.19/g10/compress.c:147: undefined reference to `inflateInit_' compress.o: In function `do_uncompress': /home/steve/Desktop/gnupg-2.0.19/g10/compress.c:196: undefined reference to `inflate' compress.o: In function `init_compress': /home/steve/Desktop/gnupg-2.0.19/g10/compress.c:82: undefined reference to `deflateInit_' compress.o: In function `init_uncompress': /home/steve/Desktop/gnupg-2.0.19/g10/compress.c:147: undefined reference to `inflateInit2_' compress.o: In function `init_compress': /home/steve/Desktop/gnupg-2.0.19/g10/compress.c:82: undefined reference to `deflateInit2_' compress.o: In function `compress_filter': /home/steve/Desktop/gnupg-2.0.19/g10/compress.c:264: undefined reference to `inflateEnd' /home/steve/Desktop/gnupg-2.0.19/g10/compress.c:273: undefined reference to `deflateEnd' collect2: ld returned 1 exit status make[2]: *** [gpg2] Error 1 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ It looks like ld cannot find object file which owns the reference above. My question is: How to determine which file I was missing? How to resolve this issue? Many thanks in advance!

  Read the article

• Ubuntu USB boot failure

  - by Steve

  When trying to boot from a boot USB drive I got the message, "Vesamenu.c32:Not a com32r image." I was trying to boot a fairly new Toshiba laptop with a Ubuntu 10.04.2 LTS created USB boot. I re-created the USB drive with 11.04 and it booted fine. These were both 32 bit versions even though the laptop is a 64 bit. I was trying to create a generic boot USB that would work on everything I might try it on. What is the consensus on this idea? Any solution to the above error? Thanks from a noobe.

  Read the article

• Installation failure

  - by Peter Kelson

  I have just downloaded Ubuntu and burned an installation DVD. I used it to install Ubuntu on a PC running Windows XP choosing the option to run Ubuntu alongside Windows. I chose to install the additional updates after initial installation. When I choose Ubuntu from the menu displayed on boot-up I get a purple and yellow screen which is completely blank except for the functioning mouse pointer. I would be grateful for suggestions on how to fix this.

  Read the article

• How *not* to handle a compensation step on failure in an SSIS package

  - by James Luetkehoelter

  Just stumbed across this where I'm working. Someone created a global error handler for a package that included this SQL step: DELETE FROM Table WHERE DateDiff(MI, ExportedDate, GetDate()) < 5 So if the package runs for longer than 5 minutes and fails, nothing gets cleaned up. Please people, don't do this... Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!...(read more)

  Read the article

• Graphic Card Installation Failure (NV 9600M GT)

  - by Georg

  I wanted to switch from 7 to Ubuntu. Now, the first thing that holds me back is the installation of the driver for my Nvidia 9600M GT. Ubuntu recommends me 4 drivers from the "Additional Driver" Section. Now, whatever driver I install, there are four things happening RANDOMLY after rebooting: The pc freezes before seeing bootup splash The pc freezes while seeing bootup splash image (ubuntu logo with the 5 dots) The pc gets into login screen and freezes instantly (Thought the unity-bar is transparent now) The pc freezes right after beeing able to login. (While this is happening the unity-bar changes from transparent to ugly-flat-style) I also tried to install the official Nvidia .run file but after exiting the X-Server, it says the driver is not compatible with the kernel and exits installation. Can somebody help me? I really wanna get rid of Windows :( But Ubuntu drives me perfectly insane. Please answer as noobish as possible. I'm an expert Windows user, but Linux is absolutely new to me. My Specs: Ubuntu 11.10 installed from USB Stick (like 100 times now :/ because I dont know how to remove the driver in recovery mode) 9600M GT 4GB Ram Intel Centrino 2 Dual Core 2.26GHz Win 7 and Ubuntu running along side. Thank you in advance, regards.

  Read the article

• Computer Boot/Installation Failure

  - by Marcus

  I recently tried to insatll Kubuntu and it failed. It completely removed everything off of my HDD and there is no operating system. Everytime I try to install a Distro it fails during instillation. I got Ubuntu 13.04 to work but it required a reboot and after that it did not work. I tried to re-install Ubuntu but it failed. I have tried Ubuntu, Kubuntu, and Xubuntu and they all failed. With Kubuntu and Xubuntu I get an error saying, "The 'grub-efi-amd64-signed' package failed to install into /target/. Without the GRUB boot loader, the installed system will not boot". When I select try (distro) it loads up but the installation won't finish. I do not want to have to try the distro everytime I want to get on it. Any help?

  Read the article

• ubuntu 12.10 installation failure

  - by Eidelmaim

  Here i am asking this question again because someone deemed it a duplicate to another topic which i over looked and NOTHING AT ALL in that topic pertained to my problem. If your going to close a topic believing it is a duplicate at least do somke reasearch into WHY you think its a duplicate and provide a like to a better source. How do i get past this installation username and password issue? I downloaded ubuntu 12.10 directly from Ubuntu.com and created a bootable USB with linuxlive. after loading the boot drive and ubuntu begins, it goes directly from the purple ubuntu startup screen directly to a black DOS like prompt asking for a ubuntu login. this is COMPLETLY before any installation -begins. i need some help with this. FYI : this is what it is saying after it goes to the login area in the DOS (Full black screen) like screen. Ubuntu 12.10 ubuntu tty1 ubuntu login: now i will provide a few images of the problem i am having. and because i DONT HAVE ANY OS on the computer BECAUSE ubuntu WONT go PAST this... i have to snap these pictuires with a cell phone and upload on another PC. these links are in chronological order from time of pressing power button to time i am presented with log in screen : image 1 image 2 can only post 2 links in messages... will post additional links in comments So, again... how do i get past this ? this is entireley before ubuntu is installed on my system. my PC specs... Homebuilt computer: Motherboard is a Asus Sabertooth x58 with a intel core i7 processor. Mushkin memory @ 12gbs. 4ea. Seagate 150gb hard drives. nvidia GTX 260 graphics card. i initially attempted to install to raid 5. failed. i broke down the raid and attempted to install to a single drive with all other drives disconnected from the PC. again, thanks in advanced for any assistance.

  Read the article

• Package Installation Failure

  - by mahima

  Whenever I try to install any new package or upgrade a package, it fails with below mentioned error: Setting up install-info (4.13a.dfsg.1-5ubuntu1) ... /etc/environment: line 1: PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games: No such file or directory dpkg: error processing install-info (--configure): subprocess installed post-installation script returned error exit status 1 No apport report written because MaxReports is reached already Errors were encountered while processing: install-info E: Sub-process /usr/bin/dpkg returned an error code (1) I checked all the directories mentioned in PATH variable exists.

  Read the article

• Disk failure is imminent Laptop Hard drive ~5 months old

  - by Drew

  There's another post about this, but I don't have enough 'points' to say anything on that thread. So I'll start my own ... with more details! My computer still boots, but gnome domain reports problems with HDD smart. This has been confirmed in the bios as it makes me press f1 to boot up now. I tried running HDD disk check in the bios, but it fails running the tests. As in, running the tests failed not that the tests themselves indicated a failed drive. Here is what disk utility is reporting as failing: Reallocated Sector Count FAILING Normalized: 132 Worst: 132 Threshold: 140 Value: 544 Current Pending Sector Count WARNING Normalized: 200 Worst: 1 Threshold: 0 Value: 2 Is this related to the insane number of DRDY errors on the drive? kernel: [51345.233069] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 kernel: [51345.233076] ata1.00: BMDMA stat 0x4 kernel: [51345.233081] ata1.00: failed command: READ DMA kernel: [51345.233090] ata1.00: cmd c8/00:00:00:8b:4a/00:00:00:00:00/e0 tag 0 dma 131072 in kernel: [51345.233092] res 51/40:00:a8:8b:4a/10:04:00:00:00/e0 Emask 0x9 (media error) kernel: [51345.233097] ata1.00: status: { DRDY ERR } kernel: [51345.233103] ata1.00: error: { UNC } kernel: [51345.291929] ata1.00: configured for UDMA/100 kernel: [51345.291944] ata1: EH complete kernel: [51347.682748] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 kernel: [51347.682754] ata1.00: BMDMA stat 0x4 kernel: [51347.682759] ata1.00: failed command: READ DMA kernel: [51347.682768] ata1.00: cmd c8/00:00:00:8b:4a/00:00:00:00:00/e0 tag 0 dma 131072 in kernel: [51347.682770] res 51/40:00:a8:8b:4a/10:04:00:00:00/e0 Emask 0x9 (media error) kernel: [51347.682774] ata1.00: status: { DRDY ERR } kernel: [51347.682777] ata1.00: error: { UNC } Did Ubuntu 10.10 and/or EXT4 eat my work laptop? What steps can I take to backup my important information, which is probably the home folder. Please include steps to recover my data on the new hard drive as well. It does me little good to have backups I can't use.

  Read the article

• Reboot failure after upgrade from 8.04 LTS to 10.04 LTS

  - by Alan Fietz

  I bought our computer from Freegeeks with Ubuntu 8.04 installed. I upgraded from Ubuntu 8.04 to 10.04 on Thursday November 10. I have an ASUS P4P800SE with dual Intel P4@3GHZ. Installation messages were: - Error loading Nautilus config info - Replaced customied /etc/login.defs - Replaced customized /etc/dhcp3/dhclient.conf - 189 packages removed - WARNING: Failed to read mirror file When I rebooted, the usual ASUS screen appeared, then "Loading GRUB" then "starting Up..." then "starting Up..." again then a blank screen (the moniter went dormant). I rebooted, started GRUB and selected: version 10.04.3 LTS kernel 2.6.32-35 generic I got the same results. I rebooted, started GRUB and selected: kernel 2.6.24-29 generic Here's what was displayed: udevd [875]: error getting socket: Invalid argument libudev:udev_monitor_new_from_netlink: error getting socket: Invalid argument Segmentation fault **Gave up waiting for root device** Common problems - Boot args (cat/proc/cmdline) - Check root delay - check root - Missing modules (cat/pro/modules; **Alert! /dev/disk/by_vvid/c59c6361 etc... does not exist. Dropping to a shell.** Then Busybox v1.13.3 started with the following prompt (?) (initramfs) _ But my typing did not appear on the screen. It appears the hard drive cannot be found. Any suggestion on how to remedy this? Thank you.

  Read the article

• Problems installing Ubuntu on a vaio with SSD, GRUB installation failure

  - by Alberto

  I have installed and used Ubuntu in several computers. But now I have a problem that I don't know how to solve. I have a Vaio (Product name: vpcz13c5e), it has a SSD 128gb. I decided to install Ubuntu (12.04, but I have tried older versions as well). Firstly, I tested with live USB, and everything was fine, so I decided go for the complete installation. Then everything went as follows: I chose to use the whole disk (first option, formatting everything). I got a message Executing 'grub-install' /deb/sdb failed. This is a fatal error After clicking ok I got another window with 3 options: the first offers different devices to install the bootloader on (I tried all of them and none works). Second option: Continue without a bootloader. In that case I got You will need to manually install a bootloader in order to start Ubuntu The third option is Cancel the installation. So, I chose Continue without a bootloader. Then I restart the computer (with the Live cd) and in a terminal type sudo fdisk -l but I obtain fdisk: unable to seek on /dev/sda: Invalid argument What can I do? any help will be appreciated.

  Read the article

• Time jumping forward on NTP failure

  - by Dan

  I have been having some weird problems with NTP for a while. If I use ntpdate to set the time then it sets fine. ntpd then invariably fails to find a server (I have loads configured) and decides to set the clock forward about 5 hours. It's a Xen server with dom0 set to a different timezone so I'm not sure if that is interfering with it. How can I make sure I ignore the dom0 time and have ntpd not change the time if it fails to reach a time server? EDIT: I now do not think it is ntpd giving me problems, I turned ntpd off and it jumped forward seemingly randomly.

  Read the article

• Graphics system failure

  - by anonymous coward

  I just upgraded two versions of Ubuntu to Oneiric after a recent set of updates broke Audacious 2.4.something in Maverick for me. When it was all finished my Asus Eee 1215N with the 1366x768 screen and the notoriously unsupported Nvidia Ion2 Optimus chipset was working on minimum compatibility fallbacks at 1024x768 resolution. So I did a little bit of reading (not enough) and tried deleting a couple parts of the graphics system to see if I could force a retry on the autodetection. The result: No graphical shell works now. Attempted so far: -reinstalling xorg/nouveau, didn't work. -installing bumblebee/nvidia-current, didn't work. -sudo dpkg-reconfigure -phigh -a, didn't work. I'd like to stress that this is otherwise a perfectly functional installation that I had spent some time setting up already (including a successful compile of Audacious 3.21 that was working with all the plugins). Is there a way for me to rebuild the graphics system from scratch or should I just give up, cry a little, backup data, wipe partition and reinstall with a USB drive?

  Read the article

• Top 10 Reasons for Startup Failure

  Consider these common mistakes made by software entrepreneurs so you don't fall into any of the traps yourself.

  Read the article

• Top 10 Reasons for Startup Failure

  Consider these common mistakes made by software entrepreneurs so you don't fall into any of the traps yourself.

  Read the article

• Can't boot after power failure - 14.04 - GRUB even doesn't showup

  - by Nateowami

  Packages were updating when somehow the power failed (battery fully charged and power got disconnected). Now it won't boot. It doesn't even get as far as GRUB. The bios says it can't boot and press any key to retry. Fortunately all data is backed up and I can boot a live SD. Now what do I do? Model: Dell Latitude D630 Dual-boots with Windows 7, but since GRUB doesn't show up that's not bootable either. Thanks in advance for any help!

  Read the article

• Ubuntu boot problem/unity failure

  - by Kenny

  So here I am sitting in a big pile of muck...over the last 2 days things have just been going from bad to worse with version of Ubuntu 12.10. So 2 days ago I was fiddling around with kismet and airmon-ng. I had added a bunch of libraries, I remember adding GTK+, Glib, Pango, etc. After restarting the other day my desktop opened fine but my background was changed to the default and none of my files on the desktop were visible and the top bar and side bar were not visible or functioning. The window managers were still working. I then tried reinstalling my nvidia drivers to see if that would change anything, it did not. Then after doing some searching online I found something that suggested I try deleting the file "libgtk-3.so.0". I deleted this and tried to restart the computer. Upon restart, I was greeted by a black screen with some writing saying something about -starting clamAV [OK] -problem with Apache Server could not verify correct...something... - checking battery state [ok]. After it gets to battery state it just stops and sits there indefinitely. So to sum, I cannot login to ubuntu because it just sits at this black screeen. If anyone has any idea as to what is going on and how to fix it please let me know. Thanks!

  Read the article

• Hard Disk Failure Factors

  Every one who works with computers whether it is a business or just for private use knows that the information they accumulate on their computers is stored on their hard disk drive. The data stored d... [Author: Michiel Van Kets - Computers and Internet - May 03, 2010]

  Read the article

• Samsung 700Z broken by Precise install

  - by Eric

  I tried to install Precise from DVD media and got to the point where the Ubuntu logo is on screen indicating the the installer is loading. At that point the screen went dark. After some time I rebooted the machine. To my dismay the machine would no longer start (Powers on but but no bios start up screen, I can hear initial hard drive spin which soon dies). This is a new machine (less than 2 months) and I have had no previous indications of defects before this incident. In other words, I am convinced the Ubuntu install had something to do with the failure of the machine. Has anyone else had this problem with this model machine? Is this known to happen with precise or other versions of Ubuntu?

  Read the article

• Critical Web Site Considerations That Could Mean The Difference Between Success Or Failure

  Blog or Website If you are new to the internet you might not be aware of a recent evolution that has taken place, which are blogs. Blogs are simply websites where people record there thoughts in wri... [Author: Michiel Van Kets - Web Design and Development - May 06, 2010]

  Read the article

• The Real Reason for CRM implementation Failure

  You can search the Internet and look at technology trade magazines and find list after list of why CRM (Customer Retention Management) implementations fail. To me, most of these "articles" are laundr... [Author: Chuck Lewis - Computers and Internet - September 03, 2009]

  Read the article

• failure to restore backup from deja dup

  - by Layla Kosakov

  I had ubuntu 12.04.1 and I made a backup with deja dup of the home folder in an external hard disk. Today I installed ubuntu 14.4 and erased the ubuntu 12.04.1. Now I'm trying to restore my back up. First it ask where is the back up to restore, then it ask of what date to restore, and then it starts, after a wile ask for the password. I put the password and it says Restoring and stays in preparing with out any advancement. Don't show any error, just stays preparing. The window of details is in white. I had all my documents... it's very bad for me, all my personal data... lost? Thanks for any help, Layla.

  Read the article

• Software Installation Failure!

  - by NIKOS ANTONIOU

  I get the same error whenever I try to install software on my laptop, for example: I want to install Pavucontrol. So, I open the terminal and I type sudo apt-get install pavucontrol and my terminal output is: Reading package lists... Done Building dependency tree Reading state information... Done The following extra packages will be installed: libgconfmm-2.6-1c2 libglademm-2.4-1c2a libpulse-mainloop-glib0 padevchooser paman paprefs pavumeter pulseaudio-module-zeroconf The following NEW packages will be installed: libgconfmm-2.6-1c2 libglademm-2.4-1c2a libpulse-mainloop-glib0 padevchooser paman paprefs pavucontrol pavumeter pulseaudio-module-zeroconf 0 upgraded, 9 newly installed, 0 to remove and 172 not upgraded. 1 not fully installed or removed. Need to get 0B/345kB of archives. After this operation, 2044kB of additional disk space will be used. Do you want to continue [Y/n]? Y perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "el_GR.UTF-8" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). Can't exec "locale": No such file or directory at /usr/share/perl5/Debconf/Encoding.pm line 16. Use of uninitialized value $Debconf::Encoding::charmap in scalar chomp at /usr/share/perl5/Debconf/Encoding.pm line 17. dpkg: `ldconfig' not found on PATH. dpkg: 1 expected program(s) not found on PATH. NB: root's PATH should usually contain /usr/local/sbin, /usr/sbin and /sbin. E: Sub-process /usr/bin/dpkg returned an error code (2) What is the problem and how do I fix it?

  Read the article

• Failure to Boot Windows 7 after Ubuntu install

  - by Mike

  My computer is a (brand new) PC notebook, without a CD drive running Windows 7. I followed this page to install from USB: https://help.ubuntu.com/community/Installation/FromUSBStickQuick The installation went well and i am using Ubuntu now (v. 12.04 i believe) I want to be able to dual boot Ubuntu and Win7 The problem is that the disc partitioning during the Linux install caused a problem with Windows, caused some problem with windows, and windows can no longer boot when i choose it at the GNU GRUB screen. When i restart my computer i can successfully boot Linux, but not Windows 7. At the GRUB screen - if i run Win7 normally, it freezes, shows a blue screen, and returns back to GRUB - if i run Win7 recovery, i dont know how to access the files that i need in order to run windows again, so nothing helpful happens. Can you please tell me what i would need to do(or link a guide) in order to run Windows again. (Windows and Linux is preferable, but if thats impossible going back to only Windows will help too) Im guessing the easiest thing to do is just to reinstall both OS, or is there anyway to undo the partition i made during the install? Thanks

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >