Search Results

Search found 1114 results on 45 pages for 'flush'.

Page 5/45 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • Route eth0 to internet traffic and eth1 to local traffic

    - by Romain Caire
    How can I route all my internet traffic on eth0 (everything except 192.168.1.0/24) and route my local traffic through eth1 (192.168.1.0)? Here is my attempt : # Flush ALL THE THINGS. ip route flush table main # Restore the main table. I flushed it because OpenVPN does weird things to it. ip route add 127.0.0.0/8 via 127.0.0.1 dev lo ip route add 0.0.0.0/0 via 164.67.195.1 ip route add 192.168.1.0/24 via 192.168.1.1 ip route flush cache

    Read the article

  • RPi and Java Embedded GPIO: Java code to blink more LEDs

    - by hinkmond
    Now, it's time to blink the other GPIO ports with the other LEDs connected to them. This is easy using Java Embedded, since the Java programming language is powerful and flexible. Embedded developers are not used to this, since the C programming language is more popular but less easy to develop in. We just need to use a dynamic Java String array to map to the pinouts of the GPIO port names from the previous diagram posted. This way we can address each "channel" with an index into that String array. static String[] GpioChannels = { "0", "1", "4", "17", "21", "22", "10", "9" }; With this new dynamic array, we can streamline the main() of this Java program to activate all the ports. /** * @param args the command line arguments */ public static void main(String[] args) { FileWriter[] commandChannels; try { /*** Init GPIO port for output ***/ // Open file handles to GPIO port unexport and export controls FileWriter unexportFile = new FileWriter("/sys/class/gpio/unexport"); FileWriter exportFile = new FileWriter("/sys/class/gpio/export"); for (String gpioChannel : GpioChannels) { System.out.println(gpioChannel); // Reset the port unexportFile.write(gpioChannel); unexportFile.flush(); // Set the port for use exportFile.write(gpioChannel); exportFile.flush(); // Open file handle to port input/output control FileWriter directionFile = new FileWriter("/sys/class/gpio/gpio" + gpioChannel + "/direction"); // Set port for output directionFile.write(GPIO_OUT); directionFile.flush(); } And, then simply add array code to where we blink the LED to make it blink all the LEDS on and off at once. /*** Send commands to GPIO port ***/ commandChannels = new FileWriter[GpioChannels.length]; for (int channum=0; channum It's easier than falling off a log... or at least easier than C programming. Hinkmond

    Read the article

  • Fake ISAPI Handler to serve static files with extention that are rewritted by url rewriter

    - by developerit
    Introduction I often map html extention to the asp.net dll in order to use url rewritter with .html extentions. Recently, in the new version of www.nouvelair.ca, we renamed all urls to end with .html. This works great, but failed when we used FCK Editor. Static html files would not get serve because we mapped the html extension to the .NET Framework. We can we do to to use .html extension with our rewritter but still want to use IIS behavior with static html files. Analysis I thought that this could be resolve with a simple HTTP handler. We would map urls of static files in our rewriter to this handler that would read the static file and serve it, just as IIS would do. Implementation This is how I coded the class. Note that this may not be bullet proof. I only tested it once and I am sure that the logic behind IIS is more complicated that this. If you find errors or think of possible improvements, let me know. Imports System.Web Imports System.Web.Services ' Author: Nicolas Brassard ' For: Solutions Nitriques inc. http://www.nitriques.com ' Date Created: April 18, 2009 ' Last Modified: April 18, 2009 ' License: CPOL (http://www.codeproject.com/info/cpol10.aspx) ' Files: ISAPIDotNetHandler.ashx ' ISAPIDotNetHandler.ashx.vb ' Class: ISAPIDotNetHandler ' Description: Fake ISAPI handler to serve static files. ' Usefull when you want to serve static file that has a rewrited extention. ' Example: It often map html extention to the asp.net dll in order to use url rewritter with .html. ' If you want to still serve static html file, add a rewritter rule to redirect html files to this handler Public Class ISAPIDotNetHandler Implements System.Web.IHttpHandler Sub ProcessRequest(ByVal context As HttpContext) Implements IHttpHandler.ProcessRequest ' Since we are doing the job IIS normally does with html files, ' we set the content type to match html. ' You may want to customize this with your own logic, if you want to serve ' txt or xml or any other text file context.Response.ContentType = "text/html" ' We begin a try here. Any error that occurs will result in a 404 Page Not Found error. ' We replicate the behavior of IIS when it doesn't find the correspoding file. Try ' Declare a local variable containing the value of the query string Dim uri As String = context.Request("fileUri") ' If the value in the query string is null, ' throw an error to generate a 404 If String.IsNullOrEmpty(uri) Then Throw New ApplicationException("No fileUri") End If ' If the value in the query string doesn't end with .html, then block the acces ' This is a HUGE security hole since it could permit full read access to .aspx, .config, etc. If Not uri.ToLower.EndsWith(".html") Then ' throw an error to generate a 404 Throw New ApplicationException("Extention not allowed") End If ' Map the file on the server. ' If the file doesn't exists on the server, it will throw an exception and generate a 404. Dim fullPath As String = context.Server.MapPath(uri) ' Read the actual file Dim stream As IO.StreamReader = FileIO.FileSystem.OpenTextFileReader(fullPath) ' Write the file into the response context.Response.Output.Write(stream.ReadToEnd) ' Close and Dipose the stream stream.Close() stream.Dispose() stream = Nothing Catch ex As Exception ' Set the Status Code of the response context.Response.StatusCode = 404 'Page not found ' For testing and bebugging only ! This may cause a security leak ' context.Response.Output.Write(ex.Message) Finally ' In all cases, flush and end the response context.Response.Flush() context.Response.End() End Try End Sub ' Automaticly generated by Visual Studio ReadOnly Property IsReusable() As Boolean Implements IHttpHandler.IsReusable Get Return False End Get End Property End Class Conclusion As you see, with our static files map to this handler using query string (ex.: /ISAPIDotNetHandler.ashx?fileUri=index.html) you will have the same behavior as if you ask for the uri /index.html. Finally, test this only in IIS with the html extension map to aspnet_isapi.dll. Url rewritting will work in Casini (Internal Web Server shipped with Visual Studio) but it’s not the same as with IIS since EVERY request is handle by .NET. Versions First release

    Read the article

  • nhibernate error recovery

    - by Berryl
    I downloaded Rhino Security today and started going through some of the tests. Several that run perfectly in isolation start getting errors after one that purposely raises an exception runs though. Here is that test: [Test] public void EntitesGroup_CanCreate() { var group = _authorizationRepository.CreateEntitiesGroup("Accounts"); _session.Flush(); _session.Evict(group); var fromDb = _session.Get<EntitiesGroup>(group.Id); Assert.NotNull(fromDb); Assert.That(fromDb.Name, Is.EqualTo(group.Name)); } And here are the tests and error messages that fail: [Test] public void User_CanSave() { var ayende = new User {Name = "ayende"}; _session.Save(ayende); _session.Flush(); _session.Evict(ayende); var fromDb = _session.Get<User>(ayende.Id); Assert.That(fromDb, Is.Not.Null); Assert.That(ayende.Name, Is.EqualTo(fromDb.Name)); } ----> System.Data.SQLite.SQLiteException : Abort due to constraint violation column Name is not unique [Test] public void UsersGroup_CanCreate() { var group = _authorizationRepository.CreateUsersGroup("Admininstrators"); _session.Flush(); _session.Evict(group); var fromDb = _session.Get<UsersGroup>(group.Id); Assert.NotNull(fromDb); Assert.That(fromDb.Name, Is.EqualTo(group.Name)); } failed: NHibernate.AssertionFailure : null id in Rhino.Security.Tests.User entry (don't flush the Session after an exception occurs) Does anyone see how I can reset the state of the in memory SQLite db after the first test? I changed the code to use nunit instead of xunit so maybe that is part of the problem here as well. Cheers, Berryl

    Read the article

  • Hibernate and parent/child relations

    - by Marco
    Hi to all, I'm using Hibernate in a Java application, and i feel that something could be done better for the management of parent/child relationships. I've a complex set of entities, that have some kind of relationships between them (one-to-many, many-to-many, one-to-one, both unidirectional and bidirectional). Every time an entity is saved and it has a parent, to estabilish the relationship the parent has to add the child to its collection (considering a one-to-may relationship). For example: Parent p = (Parent) session.load(Parent.class, pid); Child c = new Child(); c.setParent(p); p.getChildren().add(c); session.save(c); session.flush(); In the same way, if i remove a child then i have to explicitly remove it from the parent collection too. Child c = (Child) session.load(Child.class, cid); session.delete(c); Parent p = (Parent) session.load(Parent.class, pid); p.getChildren().remove(c); session.flush(); I was wondering if there are some best practices out there to do this jobs in a different way: when i save a child entity, automatically add it to the parent collection. If i remove a child, automatically update the parent collection by removing the child, etc. For example, Child c = new Child(); c.setParent(p); session.save(c); // Automatically update the parent collection session.flush(); or Child c = (Child) session.load(Child.class, cid); session.delete(c); // Automatically updates its parents (could be more than one) session.flush(); Anyway, it would not be difficult to implement this behaviour, but i was wondering if exist some standard tools or well known libraries that deals with this issue. And, if not, what are the reasons? Thanks

    Read the article

  • query regarding fixing the page size

    - by sukhada
    -- <f:subview id="header"> <tiles:insert definition="page.header" flush="false"/> </f:subview> <!-- </h:panelGroup>--> <h:panelGroup id="topMenu" > <tiles:insert definition="page.topMenu" flush="false"/> </h:panelGroup> <h:panelGroup id="pageContext"> <f:subview id="body"> <tiles:insert attribute="body" flush="false"/> </f:subview> </h:panelGroup> <f:facet name="footer"> <f:subview id="footer"> <tiles:insert definition="page.footer" flush="false"/> </f:subview> </f:facet> </h:panelGrid> this is structure or layout of page in tiles but m loading another page the it disturbing the layout the layout so how can i fix the page size?

    Read the article

  • Agile Testing Days 2012 – Day 3 – Agile or agile?

    - by Chris George
    Another early start for my last Lean Coffee of the conference, and again it was not wasted. We had some really interesting discussions around how to determine what test automation is useful, if agile is not faster, why do it? and a rather existential discussion on whether unicorns exist! First keynote of the day was entitled “Fast Feedback Teams” by Ola Ellnestam. Again this relates nicely to the releasing faster talk on day 2, and something that we are looking at and some teams are actively trying. Introducing the notion of feedback, Ola describes a game he wrote for his eldest child. It was a simple game where every time he clicked a button, it displayed “You’ve Won!”. He then changed it to be a Win-Lose-Win-Lose pattern and watched the feedback from his son who then twigged the pattern and got his younger brother to play, alternating turns… genius! (must do that with my children). The idea behind this was that you need that feedback loop to learn and progress. If you are not getting the feedback you need to close that loop. An interesting point Ola made was to solve problems BEFORE writing software. It may be that you don’t have to write anything at all, perhaps it’s a communication/training issue? Perhaps the problem can be solved another way. Writing software, although it’s the business we are in, is expensive, and this should be taken into account. He again mentions frequent releases, and how they should be made as soon as stuff is ready to be released, don’t leave stuff on the shelf cause it’s not earning you anything, money or data. I totally agree with this and it’s something that we will be aiming for moving forwards. “Exceptions, Assumptions and Ambiguity: Finding the truth behind the story” by David Evans started off very promising by making references to ‘Grim up North’ referring to the north of England. Not sure it was appreciated by most of the audience, but it made me laugh! David explained how there are always risks associated with exceptions, giving the example of a one-way road near where he lives, with an exception sign giving rights to coaches to go the wrong way. Therefore you could merrily swing around the corner of the one way road straight into a coach! David showed the danger in making assumptions with lyrical quotes from Lola by The Kinks “I’m glad I’m a man, and so is Lola” and with a picture of a toilet flush that needed instructions to operate the full and half flush. With this particular flush, you pulled the handle all the way down to half flush, and half way down to full flush! hmmm, a bit of a crappy user experience methinks! Then through a clever use of a passage from the Jabberwocky, David then went onto show how mis-translation/ambiguity is the can completely distort the original meaning of something, and this is a real enemy of software development. This was all helping to demonstrate that the term Story is often heavily overloaded in the Agile world, and should really be stripped back to what it is really for, stating a business problem, and offering a technical solution. Therefore a story could be worded as “In order to {make some improvement}, we will { do something}”. The first ‘in order to’ statement is stakeholder neutral, and states the problem through requesting an improvement to the software/process etc. The second part of the story is the verb, the doing bit. So to achieve the ‘improvement’ which is not currently true, we will do something to make this true in the future. My PM is very interested in this, and he’s observed some of the problems of overloading stories so I’m hoping between us we can use some of David’s suggestions to help clarify our stories better. The second keynote of the day (and our last) proved to be the most entertaining and exhausting of the conference for me. “The ongoing evolution of testing in agile development” by Scott Barber. I’ve never had the pleasure of seeing Scott before… OMG I would love to have even half of the energy he has! What struck me during this presentation was Scott’s explanation of how testing has become the role/job that it is (largely) today, and how this has led to the need for ‘methodologies’ to make dev and test work! The argument that we should be trying to converge the roles again is a very valid one, and one that a couple of the teams at work are actively doing with great results. Making developers as responsible for quality as testers is something that has been lost over the years, but something that we are now striving to achieve. The idea that we (testers) should be testing experts/specialists, not testing ‘union members’, supports this idea so the entire team works on all aspects of a feature/product, with the ‘specialists’ taking the lead and advising/coaching the others. This leads to better propagation of information around the team, a greater holistic understanding of the project and it allows the team to continue functioning if some of it’s members are off sick, for example. Feeling somewhat drained from Scott’s keynote (but at the same time excited that alot of the points he raised supported actions we are taking at work), I headed into my last presentation for Agile Testing Days 2012 before having to make my way to Tegel to catch the flight home. “Thinking and working agile in an unbending world” with Pete Walen was a talk I was not going to miss! Having spoken to Pete several times during the past few days, I was looking forward to hearing what he was going to say, and I was not disappointed. Pete started off by trying to separate the definitions of ‘Agile’ as in the methodology, and ‘agile’ as in the adjective by pronouncing them the ‘english’ and ‘american’ ways. So Agile pronounced (Ajyle) and agile pronounced (ajul). There was much confusion around what the hell he was talking about, although I thought it was quite clear. Agile – Software development methodology agile – Marked by ready ability to move with quick easy grace; Having a quick resourceful and adaptable character. Anyway, that aside (although it provided a few laughs during the presentation), the point was that many teams that claim to be ‘Agile’ but are not, in fact, ‘agile’ by nature. Implementing ‘Agile’ methodologies that are so prescriptive actually goes against the very nature of Agile development where a team should anticipate, adapt and explore. Pete made a valid point that very few companies intentionally put up roadblocks to impede work, so if work is being blocked/delayed, why? This is where being agile as a team pays off because the team can inspect what’s going on, explore options and adapt their processes. It is through experimentation (and that means trying and failing as well as trying and succeeding) that a team will improve and grow leading to focussing on what really needs to be done to achieve X. So, that was it, the last talk of our conference. I was gutted that we had to miss the closing keynote from Matt Heusser, as Matt was another person I had spoken too a few times during the conference, but the flight would not wait, and just as well we left when we did because the traffic was a nightmare! My Takeaway Triple from Day 3: Release often and release small – don’t leave stuff on the shelf Keep the meaning of the word ‘agile’ in mind when working in ‘Agile Look at testing as more of a skill than a role  

    Read the article

  • Routing and arp

    - by adolgarev
    If I have >ip ro 192.168.14.0/24 dev eth0 another host can obtain my mac address. But if I flush routing info: >ip ro flush table main arp resolution doesn't work. Broadcast packets "Who has 192.168.14.149" reach eth0 but OS (Linux) doesn't respond despite eth0 has address 192.168.14.149. What connection exists between routing and arp resolution?

    Read the article

  • weakref list in python

    - by Dan
    I'm in need of a list of weak references that deletes items when they die. Currently the only way I have of doing this is to keep flushing the list (removing dead references manually). I'm aware there's a WeakKeyDictionary and a WeakValueDictionary, but I'm really after a WeakList, is there a way of doing this? Here's an example: import weakref class A(object): def __init__(self): pass class B(object): def __init__(self): self._references = [] def addReference(self, obj): self._references.append(weakref.ref(obj)) def flush(self): toRemove = [] for ref in self._references: if ref() is None: toRemove.append(ref) for item in toRemove: self._references.remove(item) b = B() a1 = A() b.addReference(a1) a2 = A() b.addReference(a2) del a1 b.flush() del a2 b.flush()

    Read the article

  • Problem with NHibernate and saving.

    - by Vilx-
    When I do this: Cat x = Session.Load<Cat>(123); x.Name = "fritz"; Session.Flush(); NHibernate detects the change and UPDATEs the DB. But, when I do this: Cat x = new Cat(); Session.Save(x); x.Name = "fritz"; Session.Flush(); I get NULL for name, because that's what was there when I called Session.Save(). Why doesn't NHibernate detect the changes - or better yet, take the values for the INSERT statement at the time of Flush()?

    Read the article

  • emacs/Python: running python-shell in line buffered vs. block buffered mode

    - by Begbie00
    Hi all - In a related question and answer here, someone hypothesized that python-shell within emacs(23.2) was block-buffered instead of line-buffered. The recommended fix was to add sys.stdout.flush() to the spot in my script where I want stdio to flush its contents to the python-shell. Is there someway to trick python-shell (running in emacs 23.2 on Windows, not Linux) into either a) thinking it's attached to a TTY or b) using line-buffered instead of block-buffered mode? I don't see why I'd be able to do this in IDLE but not emacs. I'd rather customize emacs than add sys.stdout.flush() throughout my scripts. Call me lazy :-). Thanks, Mike

    Read the article

  • How to create a non-persistent Elixir/SQLAlchemy object?

    - by siebert
    Hi, because of legacy data which is not available in the database but some external files, I want to create a SQLAlchemy object which contains data read from the external files, but isn't written to the database if I execute session.flush() My code looks like this: try: return session.query(Phone).populate_existing().filter(Phone.mac == ident).one() except: return self.createMockPhoneFromLicenseFile(ident) def createMockPhoneFromLicenseFile(self, ident): # Some code to read necessary data from file deleted.... phone = Phone() phone.mac = foo phone.data = bar phone.state = "Read from legacy file" phone.purchaseOrderPosition = self.getLegacyOrder(ident) # SQLAlchemy magic doesn't seem to work here, probably because we don't insert the created # phone object into the database. So we set the id fields manually. phone.order_id = phone.purchaseOrderPosition.order_id phone.order_position_id = phone.purchaseOrderPosition.order_position_id return phone Everything works fine except that on a session.flush() executed later in the application SQLAlchemy tries to write the created Phone object to the database (which fortunatly doesn't succeed, because phone.state is longer than the data type allows), which breaks the function which issues the flush. Is there any way to prevent SQLAlchemy from trying to write such an object? Ciao, Steffen

    Read the article

  • Improve performance writing 10 million records to text file using windows service

    - by user1039583
    I'm fetching more than 10 millions of records from database and writing to a text file. It takes hours of time to complete this operation. Is there any option to use TPL features here? It would be great if someone could get me started implementing this with the TPL. using (FileStream fStream = new FileStream("d:\\file.txt", FileMode.OpenOrCreate, FileAccess.ReadWrite)) { BufferedStream bStream = new BufferedStream(fStream); TextWriter writer = new StreamWriter(bStream); for (int i = 0; i < 100000000; i++) { writer.WriteLine(i); } bStream.Flush(); writer.Flush(); // empty buffer; fStream.Flush(); }

    Read the article

  • Problem with NHibernate and saving - NHibernate doesn't detect changes and uses old values.

    - by Vilx-
    When I do this: Cat x = Session.Load<Cat>(123); x.Name = "fritz"; Session.Flush(); NHibernate detects the change and UPDATEs the DB. But, when I do this: Cat x = new Cat(); Session.Save(x); x.Name = "fritz"; Session.Flush(); I get NULL for name, because that's what was there when I called Session.Save(). Why doesn't NHibernate detect the changes - or better yet, take the values for the INSERT statement at the time of Flush()?

    Read the article

  • Issuing Current Time Increments in StreamInsight (A Practical Example)

    The issuing of a Current Time Increment, Cti, in StreamInsight is very definitely one of the most important concepts to learn if you want your Streams to be responsive. A full discussion of how to issue Ctis is beyond the scope of this article but a very good explanation in addition to Books Online can be found in these three articles by a member of the StreamInsight team at Microsoft, Ciprian Gerea. Time in StreamInsight Series http://blogs.msdn.com/b/streaminsight/archive/2010/07/23/time-in-streaminsight-i.aspx http://blogs.msdn.com/b/streaminsight/archive/2010/07/30/time-in-streaminsight-ii.aspx http://blogs.msdn.com/b/streaminsight/archive/2010/08/03/time-in-streaminsight-iii.aspx A lot of the problems I see with unresponsive or stuck streams on the MSDN Forums are to do with how Ctis are enqueued or in a lot of cases not enqueued. If you enqueue events and never enqueue a Cti then StreamInsight will be perfectly happy. You, on the other hand, will never see data on the output as you have not told StreamInsight to flush the stream. This article deals with a specific implementation problem I had recently whilst working on a StreamInsight project. I look at some possible options and discuss why they would not work before showing the way I solved the problem. The stream of data I was dealing with on this project was very bursty that is to say when events were flowing they came through very quickly and in large numbers (1000 events/sec), but when the stream calmed down it could be a few seconds between each event. When enqueuing events into the StreamInsight engne it is best practice to do so with a StartTime that is given to you by the system producing the event . StreamInsight processes events and it doesn't matter whether those events are being pushed into the engine by a source system or the events are being read from something like a flat file in a directory somewhere. You can apply the same logic and temporal algebra to both situations. Reading from a file is an excellent example of where the time of the event on the source itself is very important. We could be reading that file a long time after it was written. Being able to read the StartTime from the events allows us to define windows that will hold the correct sets of events. I was able to do this with my stream but this is where my problems started. Below is a very simple script to create a SQL Server table and populate it with sample data that will show exactly the problem I had. CREATE TABLE [dbo].[t] ( [c1] [int] PRIMARY KEY, [c2] [datetime] NULL ) INSERT t VALUES (1,'20100810'),(2,'20100810'),(3,'20100810') Column c2 defines the StartTime of the event on the source and as you can see the values in all 3 rows of data is the same. If we read Ciprian’s articles we know that we can define how Ctis get injected into the stream in 3 different places The Stream Definition The Input Factory The Input Adapter I personally have always been a fan of enqueing Ctis through the factory. Below is code typical of what I would use to do this On the class itself I do some inheriting public class SimpleInputFactory : ITypedInputAdapterFactory<SimpleInputConfig>, ITypedDeclareAdvanceTimeProperties<SimpleInputConfig> And then I implement the following function public AdapterAdvanceTimeSettings DeclareAdvanceTimeProperties<TPayload>(SimpleInputConfig configInfo, EventShape eventShape) { return new AdapterAdvanceTimeSettings( new AdvanceTimeGenerationSettings(configInfo.CtiFrequency, TimeSpan.FromTicks(-1)), AdvanceTimePolicy.Adjust); } The configInfo .CtiFrequency property is a value I pass through to define after how many events I want a Cti to be injected and this in turn will flush through the stream of data. I usually pass a value of 1 for this setting. The second parameter determines the CTI timestamp in terms of a delay relative to the events. -1 ticks in the past results in 1 tick in the future, i.e., ahead of the event. The problem with this method though is that if consecutive events have the same StartTime then only one of those events will be enqueued. In this example I use the following to define how I assign the StartTime of my events currEvent.StartTime = (DateTimeOffset)dt.c2; If I go ahead and run my StreamInsight process with this configuration i can see on the output adapter that two events have been removed To see this in a little more depth I can use the StreamInsight Debugger and see what happens internally. What is happening here is that the first event arrives and a Cti is injected with a time of 1 tick after the StartTime of that event (Also the EndTime of the event). The second event arrives and it has a StartTime of before the Cti and even though we specified AdvanceTimePolicy.Adjust on the factory we know that a point event can never be adjusted like this and the event is dropped. The same happens for the third event as well (The second and third events get trumped by the Cti). For a more detailed discussion of why this happens look here http://www.sqlis.com/sqlis/post/AdvanceTimePolicy-and-Point-Event-Streams-In-StreamInsight.aspx We end up with a single event being pushed into the output adapter and our result now makes sense. The next way I tried to solve this problem by changing the value of the second parameter to TimeSpan.Zero Here is how my factory code now looks public AdapterAdvanceTimeSettings DeclareAdvanceTimeProperties<TPayload>(SimpleInputConfig configInfo, EventShape eventShape) { return new AdapterAdvanceTimeSettings( new AdvanceTimeGenerationSettings(configInfo.CtiFrequency, TimeSpan.Zero), AdvanceTimePolicy.Adjust); } What I am doing here is declaring a policy that says inject a Cti together with every event and stamp it with a StartTime that is equal to the start time of the event itself (TimeSpan.Zero). This method has plus points as well as a downside. The upside is that no events will be lost by having the same StartTime as previous events. The Downside is that because the Cti is declared with the StartTime of the event itself then it does not actually flush that particular event because in the StreamInsight algebra, a Cti commits only those events that occurred strictly before them. To flush the events we need a Cti to be enqueued with a greater StartTime than the events themselves. Here is what happened when I ran this configuration As you can see all we got through was the Cti and none of the events. The debugger output shows the stamps on the Cti and the events themselves. Because the Cti issued has the same timestamp (StartTime) as the events then none of the events get flushed. I was nearly there but not quite. Because my stream was bursty it was possible that the next event would not come along for a few seconds and this was far too long for an event to be enqueued and not be flushed to the output adapter. I needed another solution. Two possible solutions crossed my mind although only one of them made sense when I explored it some more. Where multiple events have the same StartTime I could add 1 tick to the first event, two to the second, three to third etc thereby giving them unique StartTime values. Add a timer to manually inject Ctis The problem with the first implementation is that I would be giving the events a new StartTime. This would cause me the following problems If I want to define windows over the stream then some events may not be captured in the right windows and therefore any calculations on those windows I did would be wrong What would happen if we had 10,000 events with the same StartTime? I would enqueue them with StartTime + n ticks. Along comes a genuine event with a StartTime of the very first event + 1 tick. It is now too far in the past as far as my stream is concerned and it would be dropped. Not what I would want to do at all. I decided then to look at the Timer based solution I created a timer on my input adapter that elapsed every 200ms. private Timer tmr; public SimpleInputAdapter(SimpleInputConfig configInfo) { ctx = new SimpleTimeExtractDataContext(configInfo.ConnectionString); this.configInfo = configInfo; tmr = new Timer(200); tmr.Elapsed += new ElapsedEventHandler(t_Elapsed); tmr.Enabled = true; } void t_Elapsed(object sender, ElapsedEventArgs e) { ts = DateTime.Now - dtCtiIssued; if (ts.TotalMilliseconds >= 200 && TimerIssuedCti == false) { EnqueueCtiEvent(System.DateTime.Now.AddTicks(-100)); TimerIssuedCti = true; } }   In the t_Elapsed event handler I find out the difference in time between now and when the last event was processed (dtCtiIssued). I then check to see if that is greater than or equal to 200ms and if the last issuing of a Cti was done by the timer or by a genuine event (TimerIssuedCti). If I didn’t do this check then I would enqueue a Cti every time the timer elapsed which is not something I wanted. If the difference between the two times is greater than or equal to 500ms and the last event enqueued was by a real event then I issue a Cti through the timer to flush the event Queue, otherwise I do nothing. When I enqueue the Ctis into my stream in my ProduceEvents method I also set the values of dtCtiIssued and TimerIssuedCti   currEvent = CreateInsertEvent(); currEvent.StartTime = (DateTimeOffset)dt.c2; TimerIssuedCti = false; dtCtiIssued = currEvent.StartTime; If I go ahead and run this configuration I see the following in my output. As we can see the first Cti gets enqueued as before but then another is enqueued by the timer and because this has a later timestamp it flushes the enqueued events through the engine. Conclusion Hopefully this has shown how the enqueuing of Ctis can have a dramatic effect on the responsiveness of your output in StreamInsight. Understanding the temporal nature of the product is for me one of the most important things you can learn. I have attached my solution for the demos. It is all in one project and testing each variation is a simple matter of commenting and un-commenting the parts in the code we have been dealing with here.

    Read the article

  • Lesser Known NHibernate Session Methods

    - by Ricardo Peres
    The NHibernate ISession, the core of NHibernate usage, has some methods which are quite misunderstood and underused, to name a few, Merge, Persist, Replicate and SaveOrUpdateCopy. Their purpose is: Merge: copies properties from a transient entity to an eventually loaded entity with the same id in the first level cache; if there is no loaded entity with the same id, one will be loaded and placed in the first level cache first; if using version, the transient entity must have the same version as in the database; Persist: similar to Save or SaveOrUpdate, attaches a maybe new entity to the session, but does not generate an INSERT or UPDATE immediately and thus the entity does not get a database-generated id, it will only get it at flush time; Replicate: copies an instance from one session to another session, perhaps from a different session factory; SaveOrUpdateCopy: attaches a transient entity to the session and tries to save it. Here are some samples of its use. ISession session = ...; AuthorDetails existingDetails = session.Get<AuthorDetails>(1); //loads an entity and places it in the first level cache AuthorDetails detachedDetails = new AuthorDetails { ID = existingDetails.ID, Name = "Changed Name" }; //a detached entity with the same ID as the existing one Object mergedDetails = session.Merge(detachedDetails); //merges the Name property from the detached entity into the existing one; the detached entity does not get attached session.Flush(); //saves the existingDetails entity, since it is now dirty, due to the change in the Name property AuthorDetails details = ...; ISession session = ...; session.Persist(details); //details.ID is still 0 session.Flush(); //saves the details entity now and fetches its id ISessionFactory factory1 = ...; ISessionFactory factory2 = ...; ISession session1 = factory1.OpenSession(); ISession session2 = factory2.OpenSession(); AuthorDetails existingDetails = session1.Get<AuthorDetails>(1); //loads an entity session2.Replicate(existingDetails, ReplicationMode.Overwrite); //saves it into another session, overwriting any possibly existing one with the same id; other options are Ignore, where any existing record with the same id is left untouched, Exception, where an exception is thrown if there is a record with the same id and LatestVersion, where the latest version wins SyntaxHighlighter.config.clipboardSwf = 'http://alexgorbatchev.com/pub/sh/2.0.320/scripts/clipboard.swf'; SyntaxHighlighter.brushes.CSharp.aliases = ['c#', 'c-sharp', 'csharp']; SyntaxHighlighter.all();

    Read the article

  • Bridging 10GbE with 12.04 - bridging works but the bridging computer has no internet access

    - by Donal
    I have been trying to get 12.04 bridging working with two 10GbE cards. I have 2 10GbE cards in a linux box being used only for this bridge, 1 with 2 10GbaseT ports and another with a single CX4 port. I have 2 client computers connected with 10GbaseT cards and the CX4 card connects to a procurve switch. I can get the bridging happening mostly the way that I want, The clients receive dhcp information from the dhcp server (not the bridging machine) and can connect to and properly see the rest of the network. Speeds are ok, not amazing but working on that is another matter. My problem is that the bridging machine has no internet access ... meaning I can't update anything or apt-get anything It can ping all other machines on the local network. I've tried the helpful hints from: https://help.ubuntu.com/community/NetworkConnectionBridge "Enabling Internet Use on the Bridging Computer" and get the following RTNETLINK answers: File exists but dhclient br0 does nothing for me :( I think if it is anything it a multiple route problem as both br0 and eth4 have ipaddresses ... even though I have only set it up so that br0 has one ... Bridge setup details: /etc/network/interface auto br0 iface br0 inet static address 192.168.0.246 netmask 255.255.255.0 gateway 192.168.0.1 broadcast 192.168.0.255 dns-nameservers 192.168.0.1 dns-search example.com dns-domain example.com #(eth2 & eth3 are the 10GbaseT) #(eth4 is the CX4 connection) pre-up ip link set eth2 down pre-up ip link set eth3 down pre-up ip link set eth4 down pre-up brctl addbr br0 pre-up brctl addif br0 eth4 eth3 eth2 pre-up ip addr flush dev eth3 pre-up ip addr flush dev eth2 pre-up ip addr flush dev eth4 post-down ip link set eth4 down post-down ip link set eth2 down post-down ip link set eth3 down post-down ip link set br0 down post-down brctl delif br0 eth2 eth3 eth4 post-down brctl delbr br0 ifconfig -a br0 Link encap:Ethernet HWaddr 00:15:17:22:20:34 inet addr:192.168.0.102 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::215:17ff:fe22:2034/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:4957 errors:0 dropped:0 overruns:0 frame:0 TX packets:1077 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:596320 (596.3 KB) TX bytes:139952 (139.9 KB) eth4 Link encap:Ethernet HWaddr 00:60:dd:47:7c:05 inet addr:192.168.0.57 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::260:ddff:fe47:7c05/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:9000 Metric:1 RX packets:15391 errors:0 dropped:51 overruns:0 frame:0 TX packets:1207 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:5916769 (5.9 MB) TX bytes:154312 (154.3 KB) Interrupt:70 route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth4 0.0.0.0 192.168.0.1 0.0.0.0 UG 100 0 0 br0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 br0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 br0 192.168.0.0 0.0.0.0 255.255.255.0 U 1 0 0 eth4

    Read the article

  • GlassFish cluster-targeted jdbc is not enabled

    - by Jin Kwon
    I have a GlassFish cluster. When I tried to add node and a instance, DAS saids a bunch of error messages telling Resource [ jdbc/xxxx ] of type [ jdbc ] is not enabled [#|2012-11-14T12:07:04.318+0900|SEVERE|glassfish3.1.2|javax.enterprise.system.core.com.sun.enterprise.v3.server|_ThreadID=2803;_ThreadName=Thread-2;|java.lang.StackOverflowError at java.io.FileOutputStream.writeBytes(Native Method) at java.io.FileOutputStream.write(FileOutputStream.java:318) at java.io.BufferedOutputStream.write(BufferedOutputStream.java:122) at java.io.PrintStream.write(PrintStream.java:480) at sun.nio.cs.StreamEncoder.writeBytes(StreamEncoder.java:221) at sun.nio.cs.StreamEncoder.implFlushBuffer(StreamEncoder.java:291) at sun.nio.cs.StreamEncoder.implFlush(StreamEncoder.java:295) at sun.nio.cs.StreamEncoder.flush(StreamEncoder.java:141) at java.io.OutputStreamWriter.flush(OutputStreamWriter.java:229) at java.util.logging.StreamHandler.flush(StreamHandler.java:242) at java.util.logging.ConsoleHandler.publish(ConsoleHandler.java:106) at java.util.logging.Logger.log(Logger.java:522) at com.sun.logging.LogDomains$1.log(LogDomains.java:372) at java.util.logging.Logger.doLog(Logger.java:543) at java.util.logging.Logger.log(Logger.java:607) at com.sun.enterprise.resource.deployer.JdbcResourceDeployer.deployResource(JdbcResourceDeployer.java:117) at org.glassfish.javaee.services.ResourceProxy.create(ResourceProxy.java:90) at com.sun.enterprise.naming.impl.SerialContext.lookup(SerialContext.java:507) at com.sun.enterprise.naming.impl.SerialContext.lookup(SerialContext.java:455) at javax.naming.InitialContext.lookup(InitialContext.java:411) at javax.naming.InitialContext.lookup(InitialContext.java:411) at com.sun.appserv.connectors.internal.api.ResourceNamingService.lookup(ResourceNamingService.java:221) the JDBC Resource is ok and targeted with the cluster. I've installed the JDBC driver on the new node. Can anybody help?

    Read the article

  • NoMachine NX window closes after establishing connection

    - by blackicecube
    I am trying to use nomachine nx server and client. But somehow it doen't work. What happens is the following: Client starts up Client authenticates with Server The NoMachine window appears for 2-4 seconds The NoMachine window exists Somehow a "closeEvent" is sent. Here's what I see in the log file: [Thu Sep 24 11:20:37 2009]: Starting nxcomp with options: 'NX 299 Switch connection to: NX mode: unencrypted options: nx/nx,options=/home/foo/.nx/S-adnws029-1022-7EEF1367361DB2A7F4D9F76B06F4B434/options:1022'. [Thu Sep 24 11:20:38 2009]: NXFileMonitor::readData [Thu Sep 24 11:20:38 2009]: NXFileMonitor: opened file: [/home/foo/.nx/S-adnws029-1022-7EEF1367361DB2A7F4D9F76B06F4B434/session] [Thu Sep 24 11:20:38 2009]: LoginDialog::ShowConnectionStatus code=[246] str=[Initializing X protocol compression] error=[0] [Thu Sep 24 11:20:38 2009]: ProgressDialog::printNxStatus: [Initializing X protocol compression] [Thu Sep 24 11:20:38 2009]: LoginDialog::ShowConnectionStatus code=[247] str=[Established the display connection] error=[0] [Thu Sep 24 11:20:38 2009]: ProgressDialog::printNxStatus: [Established the display connection] [Thu Sep 24 11:20:38 2009]: NXFileMonitor::readData [Thu Sep 24 11:20:38 2009]: NXFileMonitor::readData [Thu Sep 24 11:20:38 2009]: NXFileMonitor::readData [Thu Sep 24 11:20:38 2009]: LoginDialog: slotAgentTimer [Thu Sep 24 11:20:38 2009]: NXFileMonitor::readData [Thu Sep 24 11:20:38 2009]: NXFileMonitor::readData [Thu Sep 24 11:20:38 2009]: NXFileMonitor::readData [Thu Sep 24 11:20:38 2009]: NXFileMonitor::readData [Thu Sep 24 11:20:38 2009]: QClipboard: Unknown SelectionClear event received. [Thu Sep 24 11:20:38 2009]: LoginDialog: slotAgentTimer [Thu Sep 24 11:20:38 2009]: LoginDialog: Agent found closing windows... [Thu Sep 24 11:20:38 2009]: LoginDialog: setting automatic reconnection to true. [Thu Sep 24 11:20:38 2009]: Settings::flush [Thu Sep 24 11:20:38 2009]: Settings::flush [Thu Sep 24 11:20:38 2009]: LoginDialog: closeEvent received! [Thu Sep 24 11:20:38 2009]: NXFileMonitor::readData [Thu Sep 24 11:20:38 2009]: NXFileMonitor::readData [Thu Sep 24 11:20:38 2009]: LoginDialog::destructor called begin [Thu Sep 24 11:20:38 2009]: LoginDialog: stopAllTimers [Thu Sep 24 11:20:38 2009]: LoginDialog: stopProgressTimer [Thu Sep 24 11:20:38 2009]: Utility::getPreferencesFile: 'nxclient' - '/home/foo/.nx/config/nxclient.cfg' [Thu Sep 24 11:20:38 2009]: Settings::flush [Thu Sep 24 11:20:38 2009]: Called destructor for protocol class [Thu Sep 24 11:20:38 2009]: LoginDialog::destructor called end Anyone with a helpful idea?

    Read the article

  • High disk I/O activity in CentOS server

    - by triiim
    I have about 16 websites in a CentOS dedicated, and I am having some problems on high traffic hours, it seems to be a high disk I/O activity causing a general slowdown. I've installed atop and this is what I see on the bottom (the server has been restarted thats why the values are so low): *** system and process activity since boot *** PID RDDSK WRDSK WCANCL DSK CMD 1/18 2176 1.7G 7.3G 854.4M 39 mysqld 671 1248K 3.0G 0K 13 flush-8:0 566 0K 1.1G 0K 5 jbd2/sda2-8 2401 124.2M 529.1M 22408K 3 crond 2032 2.2G 502.0M 0K 12 nginx 2360 425.8M 115.3M 4188K 2 httpd flush-8:0 and jbd2/sda2-8 are the processes I see with iotop using 99% on the IO column, and they are the processes that write the most on the hdd (after mysql). From what I saw in google this could be caused by some ext4 related bug, the current kernel is: Linux srvr.com 2.6.32-71.29.1.el6.x86_64 #1 SMP Mon Jun 27 19:49:27 BST 2011 x86_64 x86_64 x86_64 GNU/Linux I asked the hosting support to update the kernel and they tried but they now say that the server wont boot with the new installed kernel and they had to go back to the previous, they are not helping very much. Does someone has any idea how could I solve the high disk usage caused by flush-8:0 and jbd2/sda2-8 processes?

    Read the article

  • Render a view as a string

    - by Dan Atkinson
    Hi all! I'm wanting to output two different views (one as a string that will be sent as an email), and the other the page displayed to a user. Is this possible in ASP.NET MVC beta? I've tried multiple examples: RenderPartial to String in ASP.NET MVC Beta If I use this example, I receive the "Cannot redirect after HTTP headers have been sent.". MVC Framework: Capturing the output of a view If I use this, I seem to be unable to do a redirectToAction, as it tries to render a view that may not exist. If I do return the view, it is completely messed up and doesn't look right at all. Does anyone have any ideas/solutions to these issues i have, or have any suggestions for better ones? Many thanks! Below is an example. What I'm trying to do is create the GetViewForEmail method: public ActionResult OrderResult(string ref) { //Get the order Order order = OrderService.GetOrder(ref); //The email helper would do the meat and veg by getting the view as a string //Pass the control name (OrderResultEmail) and the model (order) string emailView = GetViewForEmail("OrderResultEmail", order); //Email the order out EmailHelper(order, emailView); return View("OrderResult", order); } Accepted answer from Tim Scott (changed and formatted a little by me): public virtual string RenderViewToString( ControllerContext controllerContext, string viewPath, string masterPath, ViewDataDictionary viewData, TempDataDictionary tempData) { Stream filter = null; ViewPage viewPage = new ViewPage(); //Right, create our view viewPage.ViewContext = new ViewContext(controllerContext, new WebFormView(viewPath, masterPath), viewData, tempData); //Get the response context, flush it and get the response filter. var response = viewPage.ViewContext.HttpContext.Response; response.Flush(); var oldFilter = response.Filter; try { //Put a new filter into the response filter = new MemoryStream(); response.Filter = filter; //Now render the view into the memorystream and flush the response viewPage.ViewContext.View.Render(viewPage.ViewContext, viewPage.ViewContext.HttpContext.Response.Output); response.Flush(); //Now read the rendered view. filter.Position = 0; var reader = new StreamReader(filter, response.ContentEncoding); return reader.ReadToEnd(); } finally { //Clean up. if (filter != null) { filter.Dispose(); } //Now replace the response filter response.Filter = oldFilter; } } Example usage Assuming a call from the controller to get the order confirmation email, passing the Site.Master location. string myString = RenderViewToString(this.ControllerContext, "~/Views/Order/OrderResultEmail.aspx", "~/Views/Shared/Site.Master", this.ViewData, this.TempData);

    Read the article

  • How to break out of a nested parallel (OpenMP) Fortran loop idiomatically?

    - by J.F. Sebastian
    Here's sequential code: do i = 1, n do j = i+1, n if ("some_condition") then result = "here's result" return end if end do end do Is there a cleaner way to execute iterations of the outer loop concurrently other than: !$OMP PARALLEL private(i,j) !$OMP DO do i = 1, n if (found) goto 10 do j = i+1, n if (found) goto 10 if ("some_condition") then !$OMP CRITICAL !$OMP FLUSH if (.not.found) then found = .true. result = "here's result" end if !$OMP FLUSH !$OMP END CRITICAL goto 10 end if end do 10 continue end do !$OMP END DO NOWAIT !$OMP END PARALLEL

    Read the article

  • running examples in package-Ex.R failed

    - by swarna
    Hi,My name is Swarna,I'm new to R,when i was checking my package i got a error message saying "Running examples in package-Ex.R failed" and series of statement saying where error might have occurred name of the package -package flush(stderr());flush(stdout()) name: title alias keywords Can any one please help me with this. Thank you,

    Read the article

  • what does synchronization mean in hibernate..

    - by abc
    i read that upon session.flush() The data will be synchronized (but not committed) when session.flush() is called what is synchronized with what.. whether it is DB state that will come to memory by querying or memory state will be copied to Db ? clarify this plz..

    Read the article

  • Download pdf programatically...

    - by Perplexed
    Hi, How can I download a pdf and store to disk using vb.net or c#? The url (of the pdf) has some rediection going on before the final pdf is reached. I tried the below but the pdf seems corrupted when I attempt to open locally, Dim PdfFile As FileStream = File.OpenWrite(saveTo) Dim PdfStream As MemoryStream = GetFileStream(pdfURL) PdfStream.WriteTo(PdfFile) PdfStream.Flush() PdfStream.Close() PdfFile.Flush() PdfFile.Close() many thanks, KS

    Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >