Search Results

Search found 19125 results on 765 pages for 'hard disk'.

Page 5/765 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Hard drive clicking noise on Acer AO722

  - by Blank

  I'm running Ubuntu 11.10 on an Acer Aspire One 722. Whenever I'm on battery power I get a clicking sound from my hard drive every 5 seconds or so (this does not happen when the laptop is plugged in). I'm dual booting with Windows 7 and I don't get the clicking sound in Windows. The clicking sound stops when I run the command:sudo hdparm -B 254 /dev/sda Also, according to:sudo smartctl -H /dev/sda my hard drive is healthy. Is this clicking sound something I can just ignore? Or is it a serious problem and will it eventually damage my computer? If so, how would I fix it? I have tried adding hdparm -B 254 /dev/sda to my /etc/rc.local file, but I still run into the clicking problem if my computer boots while plugged in and is then unplugged. Also, I'm finding this fix to be unreliable. Sometimes it works, sometimes it does not. Is this a good solution and is there a better way of doing this? Also, would running my laptop with a -B value of 254 have any negative effects? (I read somewhere about a lower level protecting the hard drive from bumps)

  Read the article

• Why my internal hard disk can be ejected?

  - by Bear Bear

  I have 6 hard disks in my computer and one DVD. The disk that I connect to the 6th SATA port is a regular disk. But my Windows 7 64 bit shows it as a removable drive. I can eject my hard disk! Just like a pen drive. If I connect another disk to the 6th port, I can eject that disk too. So it has nothing to do with the physical disk, it must be something related to Windows or BIOS I don't understand why Windows 7 is seeing a normal hard disk as removable. In Computer Management - Disk Management, the disk looks identical to the others - there is nothing there to suggest the drive is different from the others. But in the tray I have the icon to eject it. The motherboard model is ASUS F2A85 V PRO FM2. All the disks are formatted normally, no Dynamic Disk, no RAID, nothing special. How can I tell Windows 7 to treat the disk exactly like the others, so it can't be ejected?

  Read the article

• Easiest way to replace preinstalled Windows 8 with new hard drive with Windows 7

  - by Andrew

  There are all kinds of questions and answers relevant moving Windows 8 to a new hard drive. I'm not seeing anything quite applicable to my situation. I have a new, unopened, unbooted notebook with pre-installed Windows 8. I will be replacing the hard drive before ever booting, unless that is not possible for some reason. I want to "downgrade" to Windows 7 Pro, and I want a clean installation. To do so legitimately, I apparently either need to: Upgrade Windows 8 to Windows 8 Pro using Windows 8 Pro Pack, then downgrade; or Just install a newly-licensed copy of Windows 7 Pro. (Let me know if I've missed an option.) Installation media is likely not a problem, though if I need something vendor-specific that I cannot otherwise download, that could present an issue (Asus notebook, if that matters). If I could, I would just buy the Pro Pack upgrade, swap the hard drive (without ever booting), then install Windows 7 Pro directly on the new hard drive, using the Pro Pack key for activation. Will this work? Are there any activation issues? Edited to clarify, as some comments and answers indicate confusion: Here is, ideally, what I want to do: Before ever powering on the notebook, remove the current hard drive. Replace this hard drive with a new, blank hard drive. Install a clean copy of Windows 7 Pro on this new, blank hard drive. Unless I have no choice to accomplish the end result (a clean install of Win7 Pro on the newly-installed, previously-blank hard drive), I am not wanting to: Install Windows 7 "over" the current Windows 8 install (after upgrading to Win8 Pro). That would involve using the currenly-installed hard drive. I want to use a new, different hard drive. Copy the Win8 install to the new hard drive, then install Windows 7 "over" that installation. Install Windows 7 "over" the current Windows 8 install (after upgrading to Win8 Pro), then copy the installation to the new hard drive. If I have to use one of those three options, I will, but only if there is no other choice. Please note that this question is not about licensing: I will purchase the necessary license(s) to accomplish this procedure legally (apparently either Win8 Pro Pack or Win7 Pro -- the former currently appears less expensive).

  Read the article

• PSU died, is hard drive fried? Are other components damaged?

  - by srand

  After discovering and replacing my dead PSU, I was able to boot back into Windows. Everything seems to be working fine, however, one hard drive is not. Windows 7 says that this SATA hard drive needs to be formatted before it can work. Can the data be recovered? Also, is there a way to check the integrity of the other components of my computer or assume they will work fine?

  Read the article

• Are laptop hard drives fairly generic, or do I need to be careful to get the right one for my comput

  - by ngm

  I have a Dell Inspiron 1525 laptop, and the hard drive is failing and I'd like to get a new one. What I'm wondering is, do I need to buy a hard drive specific to my computer model, or are laptop harddrives usually fairly generic? (If that's the case then I can shop around for the best value.)

  Read the article

• Ask How-To Geek: Clone a Disk, Resize Static Windows, and Create System Function Shortcuts

  - by Jason Fitzpatrick

  This week we take a look at how to clone a hard disk for easy backup or duplication, resize stubbornly static windows, and create shortcuts for dozens of Windows functions. Once a week we dip into our reader mailbag and help readers solve their problems, sharing the useful solutions with you in the process. Read on to see our fixes for this week’s reader dilemmas. Latest Features How-To Geek ETC HTG Projects: How to Create Your Own Custom Papercraft Toy How to Combine Rescue Disks to Create the Ultimate Windows Repair Disk What is Camera Raw, and Why Would a Professional Prefer it to JPG? The How-To Geek Guide to Audio Editing: The Basics How To Boot 10 Different Live CDs From 1 USB Flash Drive The 20 Best How-To Geek Linux Articles of 2010 ShapeShifter: What Are Dreams? [Video] This Computer Runs on Geek Power Wallpaper Bones, Clocks, and Counters; A Look at the First 35,000 Years of Computing Arctic Theme for Windows 7 Gives Your Desktop an Icy Touch Install LibreOffice via PPA and Receive Auto-Updates in Ubuntu Creative Portraits Peek Inside the Guts of Modern Electronics

  Read the article

• Working with Sub-Optimal Disk Configurations (Making the best of what you’ve got)

  - by Jonathan Kehayias

  This is the first post in a what will be a series of posts on working with a sub-optimal disk configuration to squeeze as much performance out of it as possible.  You might ask what a Sub-Optimal Disk Configuration?  In this case it is a Dell Powervault MD3000 with 15 Seagate Barracuda ES.2 SAS 1 TB 7.2K RPM disks (Model Number ST31000640SS).  This equates to just under 14TB of raw storage that can configured into a number of RAID configurations.  In this case, the disk array...(read more)

  Read the article

• Disk utility running for a long time

  - by Nik

  I had a spare, old external usb hard disk which stopped working long time back due to improper removal of disk. I tried fixing it in windows (when I did not have ubuntu yet), however I couldn't fix it. So I tried formatting the disk and creating a new partition using the disk utility in ubuntu. However it seems to keep running without any indication of the progress or whatsoever. I have no idea what is happening. I have attached a screenshot below to show what I mean. As you can from the screenshot above it seems to be working on it but no indication on the progress or what it is doing. Any attempt to exit it or do any other task like safe removal or format partition leads to the the following dialog box. What should I do? Wait or restart the computer..???

  Read the article

• Unable to mount hard disk

  - by user101522

  I am unable to mount hard disk and got this message: Unable to mount 158 GB Filesystem Error mounting: mount: wrong fs type, bad option, bad superblock on /dev/sda1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so From the terminal, I tried syslog - try: No command 'syslog' found, did you mean: Command 'dsyslog' from package 'dsyslog' (universe) Command 'syslogd' from package 'sysklogd' (universe) Command 'syslogd' from package 'inetutils-syslogd' (universe) Command 'syslogd' from package 'busybox-syslogd' (universe) syslog: command not found Also tried dmesg | tail: [ 971.390588] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 12 62 30 80 00 00 40 00 [ 971.390600] end_request: I/O error, dev sda, sector 308424832 [ 971.390605] Read-error on swap-device (8:0:308424840) [ 971.390608] Read-error on swap-device (8:0:308424848) [ 971.390617] Read-error on swap-device (8:0:308424856) [ 971.390620] Read-error on swap-device (8:0:308424864) [ 971.390623] Read-error on swap-device (8:0:308424872) [ 971.390626] Read-error on swap-device (8:0:308424880) [ 971.390629] Read-error on swap-device (8:0:308424888) [ 971.390632] Read-error on swap-device (8:0:308424896) It was fine before I tried to re-install 12.04 from the live CD (which failed due to the disk problem).

  Read the article

• Access secondary hard disk from Virtual Machine

  - by Frank V

  I have a fairly specific question. I had Ubuntu on my Laptop (for years). For a variety of reasons, I've had to switch to Windows but the computer has two hard drives. The main drive was reformatted and I've installed windows. The second hard drive still has the Linux system disk format (not sure on type). Obviously, windows can't access it but can I access it from a Virtual machine (VirtualBox) or will I need to load up a Live-Session to access / move the contents? Edit: If this is possible, how would one proceed to mount the disk?

  Read the article

• How a Hard Drive Works in Slow Motion [Video]

  - by Asian Angel

  This short video lets you have a good luck at a hard drive in slow motion as the actuator arm moves across the disk and then water is added to the equation as well… How a Hard Drive works in Slow Motion – The Slow Mo Guys [via BoingBoing] HTG Explains: What Is Two-Factor Authentication and Should I Be Using It? HTG Explains: What Is Windows RT and What Does It Mean To Me? HTG Explains: How Windows 8′s Secure Boot Feature Works & What It Means for Linux

  Read the article

• Which hard disk drive is which?

  - by djeikyb

  I want to know which hard disk drive corresponds to which device path. It's trivial to match the hard disk stats (brand, size) with the dev path, but I want more. I want to know which drive is which inside my case. What's a good way to go about getting this info? I would prefer not to tear apart my server to remove all the drives, then add back one by one. I am willing to preform reboots. The drives are inconveniently scrunched together in the case. The label information is hidden. I can open the case. Most disks are SATA, so theoretically hot swappable. So, Unplugging and tracing cables might help in answering.

  Read the article

• Changing Disk Allocation for Ubuntu on Dual-Boot System

  - by OtagoHarbour

  When I first installed Ubuntu, I had a new PC with Windows 7 installed. It was my first installation of Ubuntu so I only allocated 45% of the disk for Ubuntu. Now I find that I have been using Ubuntu exclusively so I would like to change the allocation of the disk so Ubuntu has say 75% of the disk and Win. 7 25%. Is there a way to do this without reformatting the disk. I am using Ubuntu 11.10 with Gnome. Thanks, Peter

  Read the article

• Save to Hard Drive instead of bootable USB

  - by WAM

  I followed the instructions on the Ubuntu website on how to put Ubuntu 12.04 on a USB and make it a bootable USB stick for windows. It worked fine and I can boot up and run Ubuntu, but every time I try to download software or change settings it tries to save it to the USB rather than the hard drive built into the computer. The USB doesn't have enough space so the download fails and in addition it doesn't retain setting changes so when I restart my computer all the settings return to default and anything I saved is gone. Is there any way to change things so that when I download software or change settings Ubuntu will save it to my hard drive instead of the USB?

  Read the article

• Slow transfer to external USB3 hard drive

  - by JMP

  Trying to backup data from hard drive before reloading windows following some issue with its load. Having trouble with the file transfer to a USB3/2 external hard drive NTFS. Getting transfer speed of about 116.7kB/sec. In other words its taking about 5 hours to transfer 1.4GB. I've got about 80GB to go. So the transfer is going to take 11days. Seems a little on the slow side. Am I missing something? Is there a way to make this faster. No issue with the external drive transferring this amount in windows. But don't have that option at the moment.

  Read the article

• Why does my root filesystem keep becoming read-only?

  - by Scott Severance

  I've lately been having an issue with my root filesystem becoming readonly. It happens some amount of time after boot. I don't know exactly when it happens, as I don't usually notice it until something such as suspending the computer or printing fails. It seems to be fairly random. Since most of my system is on that partition, I can't re-mount it without rebooting. After this happens, the system runs a fsck. Sometimes it prompts to fix problems; other times it apparently finds none. To troubleshoot, I've searched through the logs but found nothing relevant. This might be due in part to not knowing when the actual errors took place. The filesystem is apparently good to begin with, as when fsck runs its fixes it doesn't report any errors. I've scanned the disk with SpinRite. A while ago, SpinRite found and recovered from some bad sectors on the hard drive. I ran a level 4 scan (a thorough scan) after this probem appeared, but SpinRite found nothing. The SMART data reports that the disk is OK with 63 bad sectors. The number of bad sectors hasn't changed recently. I realize that the disk isn't in the best of conditions, and I have complete backups in case of catastrophic failure. Yet the lack of errors in the logs, combined with SpinRite's test results and the unchanged SMART data makes me think that this problem has some cause other than disk failure. Other than disk failure, what could cause my symptoms?

  Read the article

• Install failing new hard drives

  - by John

  I'm trying to install Ubuntu server 12.04 on my new hard drives but it seems to fail. Once past the option menu where is asked the partition to install the OS on, goes into a hold and no progress is shown afterwards. The hard disk I'm trying to install it on is: Western Digital WD20EARX The installation process hangs around 'installing core packages/installing the base system' . The CD comes through the test with being valid/ok. any help would be appreciated. Thanks in advance.

  Read the article

• External hard-drive is "clicking" when idle [closed]

  - by mirumir

  I'm struggling with a very annoying issue: My new hard-drive (Samsung Spinpoint M8 1TB (HN-M101MBB) was build in an USB 3.0 external case (Lian Li EX-10QR) and formatted with ext4. When this hard-drive is connected to my Notebook via USB 2.0 it "klicks", the LED flashs too, every second, but only when it's idle! It stays silent, when something is copying or reading from it. But when this drive was formatted with ext3 or fat, it always remained silent. This also happens with a Western Digital WD10JPVT Scorpio Blue, but the "klicks" are even louder! System: 12.04 64-bit with Gnome-Shell. Any ideas how to approach this issue?

  Read the article

• Slow tranfer to external USB3 hard drive

  - by JMP

  Trying to backup data from hard drive before reloading windows following some issue with its load. Having trouble with the file transfer to a USB3/2 external hard drive NTFS. Getting transfer speed of about 116.7kB/sec. In other words its taking about 5 hours to tranfer 1.4GB. I've got about 80GB to go. So the transfer is going to take 11days. Seems a little on the slow side. Am I missing something? Is there a way to make this faster. No issue with the external drive tranferring this amount in windows. But don't have that option at the moment.

  Read the article

• Partition Hard Drive For Data

  - by user211779

  Greetings ~ I am a new Linux/Ubuntu user. For various reasons (mostly my own ignorance) I am on my third install of Ubuntu 12.04. I want to partition the hard drive to create a drive for data and personal files in case I ever have to install again. I have been struggling all afternoon to make a gparted live USB. Tuxboot looked like the answer but I get an error message when using it. So, I am asking for help. Ultimately, I want to partition the hard drive for data and personal files. What do you recommend?

  Read the article

• Maxtor 500GB external hard drive not being detected but power is going to it?

  - by ClarkeyBoy

  I have 2 * Maxtor Onetouch 4 Lite 500GB external hard drives (part no. 9NT2A4-500). They both used to work fine on my old laptop (an Acer) but I have not used them for about a year, since my laptop was stolen and I got this one (also an Acer [Aspire 7738G]). I have one plugged into the mains with one of the leads I believe was supplied with them. It appears to be receiving power as it is warm and the power light (on the unit itself) is on; also the mains adapter is fairly warm. I also have it plugged into my laptop with a USB lead which I have tested on my mp3 player (so I know it works). However my hard drive is not showing on my computer. I have tried checking for new hardware, installing the software that was supplied with it, checking drive letters in case it is registered as C: or something stupid, checking for problems etc... I can't find any cause for it to do this. It does appear to be starting up and, possibly, shutting down and restarting constantly (that's what it sounds like altho I can't be certain). I have had both hard drives stored in different places for the last year and they're both doing the same thing.. if it was only one then I'd guess it had got damaged or corrupted or something but since it is both I doubt this is it. The only things in common with both of them are the leads and the laptop, however I know the USB lead works and guess the mains lead works as there is power going to the unit. Has anyone come across this before or does anyone have any idea what the cause / solution to the problem is? Any help would be greatly appreciated. Regards, Richard

  Read the article

• So I want to separate my Program Files from the hard disk with the other system files. What is the b

  - by grg-n-sox

  So I am running Windows 7 as my only OS. I have two hard drives on my computer. The first one is a 74GB Western Digital 10K RPM Raptor. The second one is a 1TB Seagate Barracuda (couldn't remember if it was a 7200.12 or some other decimal after the 7200). The OS in installed to the Raptor and I am just using the Barracuda for storage. With this setup, in case you couldn't guess already, the Raptor fills up quick and I am constantly having to maintain file locations. And although it is nice to have that quicker boot time and program loading, the time spent maintaining the drive makes me waste more time overall. So I am looking for a way to try to keep it clear while still keeping up system loading speeds. A performance hit on games and such is easily acceptable and as long as I can guarantee a 5GB space on the Raptor, I can always just temporarily move the disc image there. So I am figuring that having games installed like Boarderlands and Mass Effect, as well as having large files such as linux distro DVD disc images in My Documents, I probably should be moving my personal files and Program Files directories to the Barracuda. I currently have folders on the Barracuda for this, but this means routinely copying files over and I can't really do anything with the Program Files folder that already exists. The best I can do is remember to designate the install directory of any program installation to the alternative install directory, which I can't seem to get to ever work right with Steam. With that in mind, is there a way that is not too drastic to let me just change some folders and system settings once and everything works fine afterwards for my setup? I have considered just reinstalling Windows 7 to the Barracuda but that would defeat the purpose of the Raptor except for running disc images off of. I am also heard a bit about being able to use symlinks to fix this, but I have also heard that symlinks in Windows are not necessarily the same and not as well supported on Windows. An example a friend mentioned was something about how if you have a symlink in Windows on a small hard drive to a large hard drive and the contents the symlink points to is larger than the small hard drive's capacity, then Windows will think the smaller hard drive is full. So is there a fix/workaround that will let me use symlinks across hard drives without the issues or is there a better solution I am not being told about, not mentioning, or not thinking of?

  Read the article

• Windows detected a hard disk failure* - what should I do?

  - by bart

  I'm using Windows 7 x64 Ultimate, I'm getting windows error popups like this one for about 3 days, multiple times a day: This Samsung SpinPoint F3 HD502HJ 500 GB is about 2 years old and I already checked it with Samsung ES Tool 3.0, did all the scans (took hours) and everything is fine! I have no malware, viruses and this started to happen after I have had some electrcity issues at my house (multiple power surges / overvolatege during the night, PC was connected, but turned off), any ideas? What other test should I perform? I believe the disk could be damaged, but then diagnostic tools should prove this, right? *in fact "Windows detected hard disk problem" but I was unable to put word "problem" within the title as well.

  Read the article

• Move virtual machine hard disk to a separate physical hard disk for better performance?

  - by joeeoj

  I have a dual-core machine with the host OS and many guest virtual OSs. Although I have 8GB of RAM, I notice a slowdown when I turn some virtual machine on (and it takes only 1GB RAM). I was told that I should move virtual machine hard disk file to a separate (another) physical hard drive in my PC to get better performance. This way the head of the hard disk would not have to jump from the virtual OS to the host OS as each hard drive would have its own head to deal with the OS: hard drive 1 head for host OS and hard drive 2 head for guest OS. Is this true? Should I get another hard disk only for virtual machine hard disk files?

  Read the article

• VirtualBox : increase hard disk size of the virtual machine

  - by wim

  I have run out of space on my WinXP virtual machine, which I only gave 10 GB space for when I created it. Is there an easy way to increase it to, say, 20 GB? I can't see any obvious option in VirtualBox settings. edit: the suggestion below gives this error wim@wim-ubuntu:/media/data/winxp_vm$ VBoxManage modifyhd wim.vdi --resize 20000 VBoxManage: error: Cannot register the hard disk '/media/data/winxp_vm/wim.vdi' {46284957-2c09-4e70-8a49-bfbe0f7f681d} because a hard disk '/home/wim/VirtualBox VMs/winxp_vm/wim.vdi' with UUID {46284957-2c09-4e70-8a49-bfbe0f7f681d} already exists VBoxManage: error: Details: code NS_ERROR_INVALID_ARG (0x80070057), component VirtualBox, interface IVirtualBox, callee nsISupports Context: "OpenMedium(Bstr(pszFilenameOrUuid).raw(), enmDevType, AccessMode_ReadWrite, fForceNewUuidOnOpen, pMedium.asOutParam())" at line 210 of file VBoxManageDisk.cpp edit2: removing the .vdi from VirtualBox before calling VBoxManage command, then adding it back in, was successful. But now I can't boot the virtual machine, I get this worrying screen: By the way, it says FATAL: Could not read from the boot medium! System halted. edit3: The vdi must be reattached to the VM after VBoxManage command. Further, the partition will need to be resized from WITHIN windows, because you will have this empty space: I was able to resize the partition easily using a bit of freeware called EASEUS Partition Master 9.1.0 Home Edition.

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >