Search Results

Search found 12484 results on 500 pages for 'host'.

Page 5/500 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • virtualbox host | Ubuntu vs XP

    - by iambriansreed
    In order to lengthen the lifespan of my machine I am replacing the weakest link, the hard drive and installing a new OS. I had planned on using xp pro as my virtualbox host and ubuntu as guest. After messing with ubuntu desktop and server I am really impressed and am thinking of reversing the virtualbox setup; ubuntu host xp guest. I would use XP for Adobe Fireworks, Netflix, and iTunes (maybe) that's pretty much it. Any reason not to do ubuntu host with xp guest? I know the xp vbox will run slower as a guest but really how much slower? It's a desktop. 4gb ram, 500gb disk, Pent D 3.2 ghz

    Read the article

  • How to open files which are located in VirtualBox's Guest Machine from Netbeans of Host Machine

    - by Bakhtiyor
    I have Ubuntu 10.04 installed in my Host Machine and it has VirtualBox. I have Guest Machine wich runs Ubuntu 10.10. I have NetBeans installed in Host Machine and need to open my project files which are located in Guest Machine. The reason I need it is because in my working place I have not access to install any applications, that is why I have Guest Machine where I have Web Server installed on it and also I have one web application that I am developing. I need to open that web application files from Guest Machine's Netbeans in order to modify/create new files for my web application. I have configured SSH server of Guest Machine and added port redirection in the VirtualBox so that now I can connect to it from Host Machine. But I could not find any way to open those files from Netbeans. Could anybody give me advice about how can I do that please? UPDATE I forgot to say that I don't want to use SharedFolders.

    Read the article

  • Need to configure 4 Serial ports virtualbox guest win machine (my host is ubuntu 11.10)

    - by ubu
    I have an application that run's on winNT and requires the APCI-7500 card (a 4-multiport serial card), so I've installed the winNT thru virtualbox, but as i try to configure the serial ports I notice that virtualbox shows only 2 serial ports, only 2 tabs in the ports configuration section.How can I add the other 2 ports and configure them. My host is ubuntu 11.04 My guest is winNT My virtualbox version is 4.0.4_OSEr70112 I'll appreciate any help. Thanks in advance. I've followed these threads but still get no light in this issue How to access serial ubuntu host serial port on VirtualBox guest OS Can't access host serial port on VirtualBox Winxp

    Read the article

  • Web host that handles excess php mailing [closed]

    - by CyberJunkie
    Possible Duplicate: How to find web hosting that meets my requirements? I'm having trouble choosing a host that meets my application's needs. Please kindly inform me what I should look for when choosing a web host. My application is similar to a reminder service that reminds users of events that they scheduled. I'm sending emails to users through a PHP script. I'm not sending one email to multiple recipients. Each recipient receives a different message. I plan to use cron jobs every minute and expect the application to send roughly 200 individual emails in 1 hour (for a small user base that may grow). I don't have hosting experience with this type of application. I plan to start on a shared host and move up in the future to vps or dedicated. Most shared hosts that I looked into allow 50-100 emails per hour with delays between mailings. What do you recommend?

    Read the article

  • Problem with host-only in Virtual Box

    - by Kamiar
    Hi folks I have virtualbox software in my computer and I have windows 7 in host. my virtual has windows server 2008 and Sql server 2008 I have client SQL version in windows 7(host computer) but as you know virtualbox works in host-only network. I need Connection host to guest but I can not see virtual computer(win2008) from host (win7). Is there any solution ?

    Read the article

  • Can't connect to a Hyper-V VM from anywhere but the host OS

    - by Elbelcho
    I have an unusual situation on hand where I'm able to connect to a Hyper-V guest VM from the HOST, but not from anywhere but the host. The VM is running WIn2k8R2 and has IIS installed and Remote Desktop enabled. If I browse to the IP from the host OS, the IIS7 page displays. I can also RDP into the guest OS from the host as well as ping. From OFF the host, RDP, web and ping all fail. If I completely shut off the guest VM's firewall, ping will then start to respond, but all RDP and port 80 still don't. The physical host machine has 2 nics installed, but only one is plugged in. The one plugged in has a static IP. I have one Hyper-V virtual network and it's set to external. The guest VM has one NIC with a different static IP than the host, but both are on the same subnet. The host machine is joined to the domain, the guest VM is not. Any sugestions? Thanks so much for any help you may be able to provide!

    Read the article

  • How to connect a VM running on an ESXi host to that host via a VMKernel NIC?

    - by Zac B
    Say I have an ESXi (5.0) host that runs a Linux distribution which hosts iSCSI targets, which contain the images for other VMs which the host will run. When it's used, I'll start the host first, then the iSCSI server, and then refresh all storage targets/HBAs in order to see the provided shares as online. I know it's a strange puzzle-box solution, but I was told to implement it. The ESXi host itself has a gigabit NIC which connects to the outside world. The guest OS (CentOS) supports VMXNet3, however, and if I can, I'd like to use its VMXNET3 NIC to host iSCSI for the ESXi host. How should I go about doing this? I went to create a new virtual network, and selected "VKernel", as it suggested that I use that type of network for SAN traffic, but it is apparently not set up for "self-hosted" SAN hosts, as the new network did not appear as an option to attach the CentOS box's VMXNET3 NIC to. How should I best connect an iSCSI host out to its "parent" ESXi host, if I need a) a 10gb connection, and (optionally) b) a VMKernel network for it?

    Read the article

  • Upload images API on 3rd Party host .. Flickr ?

    - by Enatom
    I am building an Image Sharing feature for my website, where users can upload images and show it off on my website, through their own profile gallery. Except I dont want to physically host the uploaded images. Are there API's that can allow me to descretly save the uploaded images (from the users) to another Host, such as Flickr, Google etc.. I know Flickr has a good API, but could I use it for this? And does the Flickr Upload API only work with authorised users ? becuase I dont want them to upload to their Flickr account, but just host them with 1 big account so to speak thanks.

    Read the article

  • Vmware Workstation, Win7 host, Ubuntu guests with Nat + Host-only networks but they cannot connect to the Internet

    - by Ikon
    I have a Win7 host machine with Vmware Workstation. In the workstation I have 3 Ubuntu installed. All 3 Ubuntu guests have a Nat network - to access the internet without asking the router for a local address - and a Host-only network - to connect all Ubuntu quests and the host in a private network for internal communication, without touching the router. When I try to make any of the Ubuntu quests to get data from the internet - assuming that they would figure out that the Nat-ed interface can access the requested data - they fail and report that there is no route to my query. If I disconnect the 2nd interface on the Ubuntu guests with the Host-only network and restart networking, they start to know the route to the internet. Odd, during the installation of the guests they asked which of the 2 given interfaces - with Nat and Host-only config - should be used to get updates during installation and they oddly managed to get the updates. Not so after the installation has finished and rebooted. I have checked the Virtual Network Editor that the Nat interface should use my real network card to access the net, so there should be no problem. I wish not to use the router's dhcp service to give the Ubuntu quests an address, and also I don't want the guests to be accessable from the local network directly, but only by the host - that's the Host-only network is for. Any suggestions? Edit: 192.168.189.0 is the Nat interface and 192.168.7.0 is the Host-only. $ route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.7.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 192.168.189.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 0.0.0.0 192.168.189.2 0.0.0.0 UG 100 0 0 eth0

    Read the article

  • Setting up Virtual Host in Fedora Core 15 using apache

    - by Roland
    I'm trying to setup a couple of Virtual Host files on my Localhost PC running Fedora Core 15. Now I get this working, but now onloy one Virtual Host site works, and if I type in 127.0.0.1/test/testApp.php which is not related to the Virtual Host site , I get redirected to the Virtual Host site. Here's what I did. I created a new folder called virtualhosts in /etc/httpd/ where all my host files are stored in the following format site.conf In /etc/conf/httpd.conf I enabled NameVirtualHost *:80 and included the host files at the bottom of the config page like this Include virtualhosts/*.conf In /etc/hosts I added the line 127.0.0.1 website No when I run sudo httpd -t I get Syntax OK I restart apache and then the Virtualhost works, but as soon as I add other hosts and only use 127.0.0.1 as above it still links to the original host. Am I doing anything wrong here or left out something? An example of my Virtual Host file looks like this <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot /var/www/html/website/ ServerName website ServerAlias website ErrorLog logs/dev-error_log CustomLog logs/dev-access_log common Alias /blog /var/www/html/blog/ <Directory /var/www/html/website/> Options FollowSymLinks Allow Override All Order allow,deny allow from all </Directory> #php_value error_reporting E_ALL & ~E_NOTICE & ~E_DEPRECATED php_flag display_errors On php_value date.timezone Europe/London </VirtualHost>

    Read the article

  • Prevent virtual host on same server interact on apache [closed]

    - by Soosoo Soo
    Possible Duplicate: Prevent virtual host on same server interact on apache I have a vps apache 2.0 webserver, with multiple domains and multiple IPs set. In document root /var/www/html/ I have http://serverA.com, and I create a virtual host in folder /var/www/html/serverB for http://serverB.com. They work great for both, but the problem is I can access serverB files with the URL http://serverA.com/serverB/, which I don't want to happen. How do I prevent that?

    Read the article

  • sudo: unable to resolve host ubuntu-server

    - by Manfred Van de Waarsenburg
    I have a problem with sudo. Every time when I trying to use sudo I got this problem: sudo: unable to resolve host ubuntu-server My /etc/hosts file: 127.0.0.1 localhost 127.0.1.1 ubuntu-server # The following lines are desirable for IPv6 capable hosts ::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes FF02::2 ip6-allrouters /etc/hostname gives: ubuntu-server I think there is some other setting that causes the unable to resole host, but I cannot find these.

    Read the article

  • SharePoint 2010 – Central Admin tooling to create host header site collections

    - by eJugnoo
    Just like SharePoint 2007, you can create host-header based site collections in SharePoint 2010 as well. It means, that you do not necessarily need to create a site-collection under a managed path like /sites/, you can create multiple root-level site collections on same web-application/port by using host-header site collections. All you need to do is point your domain or sub-domain to your web-application and create a matching site-collection that you want. But, just like in 2007, it is something that you do by using STSADM, and is not available on Central Admin UI in 2010 as well. Yeah, though you can now also use PowerShell to create one: C:\PS>$w = Get-SPWebApplication http://sitename   C:\PS>New-SPSite http://www.contoso.com -OwnerAlias "DOMAIN\jdoe" -HostHeaderWebApplication $w -Title "Contoso" -Template "STS#0"   This example creates a host header site collection. Because the template is provided, the root Web of this site collection will be created. .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } I’ve been playing with WCM in SharePoint 2010 more and more, and for that I preferred creating hosts file entries for desired domains and create site-collections by those headers – in my dev environment. I used PowerShell initially, but then got interested to build my own UI on Central Admin instead. Developed with Visual Studio 2010 So I used new Visual Studio 2010 tooling to create an empty SharePoint 2010 project. Added an application page (there is no option to add _Admin page item in VS 2010 RC), that got created in Layouts “mapped” folder. Created a new Admin mapped folder for 14-“hive”, and moved my new page there instead. Yes, I didn’t change the base class for page, its just that it runs under _admin, but it is indeed a LayoutsPageBase inherited page. To introduce a action-link in Central Admin console, I created following element: 1: <Elements xmlns="http://schemas.microsoft.com/sharepoint/"> 2: <CustomAction 3: Id="CreateSiteByHeader" 4: Location="Microsoft.SharePoint.Administration.Applications" 5: Title="Create site collections by host header" 6: GroupId="SiteCollections" 7: Sequence="15" 8: RequiredAdmin="Delegated" 9: Description="Create a new top-level web site, by host header" > 10: <UrlAction Url="/_admin/OfficeToolbox/CreateSiteByHeader.aspx" /> 11: </CustomAction> 12: </Elements> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Used Reflector to understand any special code behind createpage.aspx, and created a new for our purpose – CreateSiteByHeader.aspx. From there I quickly created a similar code behind, without all the fancy of Farm Config Wizard handling and dealt with alternate implementations of sealed classes! Goal was to create a professional looking and OOB-type experience. I also added Regex validation to ensure user types a valid domain name as header value. Below is the result…   Release @ Codeplex I’ve released to WSP on OfficeToolbox @ Codeplex, and you can download from here. Hope you find it useful… -- Sharad

    Read the article

  • Is using the windows script host, especially the FileSystemObject hereof a good idea?

    - by Dabblernl
    Recently I have been asked to do some maintenance on a VB6 application. This involves some file IO. I find the IO operations offered by referencing the windows script host and using the FileSystemObject a lot friendlier than the IO operations that come with VB6. But will this cause problems because of security issues, or because of the fact that the script host will be disabled on some users' computers?

    Read the article

  • Can't ping host from vmware guest using bridged networking

    - by user199421
    Host is Windows 7 Guest is Ubuntu 11.04 Network adapter is wireless I can ping other computers on the network but not the host. No firewall are involved. Sniffing the traffic with wireshark it looks like both the host and the guest are using the same MAC address. My guest simply doesn't receive a reply when asking for 192.168.1.101 (the host) My router has no problem giving both of them different IP addresses but maybe duplicate MAC address is the problem? It seems logical that both will have the same MAC address (from the host point of view) but it strange that there is no work around for this because otherwise I don't see how the host and guess are supposed to communicate.

    Read the article

  • Best practice for system clock sync on KVM host

    - by Tauren
    I have an Ubuntu 9.10 server running as a KVM host with ntpd installed on it. The host system has the correct system time. At the moment I only have a single KVM guest, also Ubuntu 9.10 server. I do not have ntpd installed on it, and I just discovered the clock is about 6 minutes slow. It wasn't that way when it was installed about a month ago. I thought that I only needed to keep the host clock synchronized and that the guests used the host clock. But maybe that is a memory from using OpenVZ. I believe the reasoning was related to only the host could modify the physical system clock. Is running ntpd on both the host and all the guests the correct thing to do? Or is there something else that is preferred? How should I keep the guest clocks in sync?

    Read the article

  • How to share internet connection on Mac os x to Virtualbox vm's using Host-only

    - by redben
    In one line : is the following possible : Airport <- osx bridge - vbox-Host-only - vm's On a mac os x, i have virtual box with a virtual machine. For now i have configured 2 interfaces for my virtual machine eth0 is normal bridge for my vm to acces the internet (when airport is connected) eth1 is set to host-only so i can access my vm from the host when there is no wifi/aiport is down. So basically it's like Adapter 1 when there is Wifi, Adapter 2 when there is not. I'd like to have only one configuration to make it simpler. I thought i could just keep the Host only configuration, and on the host (os x) go to internet sharing and select "share from airport" to vboxnet0 (the vb virtual interface). Only to find out that vboxnet0 dosn't show up in the interfaces list on os x preferences. I know that on a linux host you could install something called bridge-utils and use that to bridge the two insterfaces. Is there any thing like that for Mac ?

    Read the article

  • Bridging LXC containers to host eth0 so they can have a public IP

    - by Vianney Stroebel
    UPDATE: I found the solution there: http://www.linuxfoundation.org/collaborate/workgroups/networking/bridge#No_traffic_gets_trough_.28except_ARP_and_STP.29 # cd /proc/sys/net/bridge # ls bridge-nf-call-arptables bridge-nf-call-iptables bridge-nf-call-ip6tables bridge-nf-filter-vlan-tagged # for f in bridge-nf-*; do echo 0 $f; done But I'd like to have expert opinions on this: is it safe to disable all bridge-nf-*? What are they here for? END OF UPDATE I need to bridge LXC containers to the physical interface (eth0) of my host, reading numerous tutorials, documents and blog posts on the subject. I need the containers to have their own public IP (which I've previously done KVM/libvirt). After two days of searching and trying, I still can't make it work with LXC containers. The host runs a freshly installed Ubuntu Server Quantal (12.10) with only libvirt (which I'm not using here) and lxc installed. I created the containers with : lxc-create -t ubuntu -n mycontainer So they also run Ubuntu 12.10. Content of /var/lib/lxc/mycontainer/config is: lxc.utsname = mycontainer lxc.mount = /var/lib/lxc/test/fstab lxc.rootfs = /var/lib/lxc/test/rootfs lxc.network.type = veth lxc.network.flags = up lxc.network.link = br0 lxc.network.name = eth0 lxc.network.veth.pair = vethmycontainer lxc.network.ipv4 = 179.43.46.233 lxc.network.hwaddr= 02:00:00:86:5b:11 lxc.devttydir = lxc lxc.tty = 4 lxc.pts = 1024 lxc.arch = amd64 lxc.cap.drop = sys_module mac_admin mac_override lxc.pivotdir = lxc_putold # uncomment the next line to run the container unconfined: #lxc.aa_profile = unconfined lxc.cgroup.devices.deny = a # Allow any mknod (but not using the node) lxc.cgroup.devices.allow = c *:* m lxc.cgroup.devices.allow = b *:* m # /dev/null and zero lxc.cgroup.devices.allow = c 1:3 rwm lxc.cgroup.devices.allow = c 1:5 rwm # consoles lxc.cgroup.devices.allow = c 5:1 rwm lxc.cgroup.devices.allow = c 5:0 rwm #lxc.cgroup.devices.allow = c 4:0 rwm #lxc.cgroup.devices.allow = c 4:1 rwm # /dev/{,u}random lxc.cgroup.devices.allow = c 1:9 rwm lxc.cgroup.devices.allow = c 1:8 rwm lxc.cgroup.devices.allow = c 136:* rwm lxc.cgroup.devices.allow = c 5:2 rwm # rtc lxc.cgroup.devices.allow = c 254:0 rwm #fuse lxc.cgroup.devices.allow = c 10:229 rwm #tun lxc.cgroup.devices.allow = c 10:200 rwm #full lxc.cgroup.devices.allow = c 1:7 rwm #hpet lxc.cgroup.devices.allow = c 10:228 rwm #kvm lxc.cgroup.devices.allow = c 10:232 rwm Then I changed my host /etc/network/interfaces to: auto lo iface lo inet loopback auto br0 iface br0 inet static bridge_ports eth0 bridge_fd 0 address 92.281.86.226 netmask 255.255.255.0 network 92.281.86.0 broadcast 92.281.86.255 gateway 92.281.86.254 dns-nameservers 213.186.33.99 dns-search ovh.net When I try command line configuration ("brctl addif", "ifconfig eth0", etc.) my remote host becomes inaccessible and I have to hard reboot it. I changed the content of /var/lib/lxc/mycontainer/rootfs/etc/network/interfaces to: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 179.43.46.233 netmask 255.255.255.255 broadcast 178.33.40.233 gateway 92.281.86.254 It takes several minutes for mycontainer to start (lxc-start -n mycontainer). I tried replacing gateway 92.281.86.254 by : post-up route add 92.281.86.254 dev eth0 post-up route add default gw 92.281.86.254 post-down route del 92.281.86.254 dev eth0 post-down route del default gw 92.281.86.254 My container then starts instantly. But whatever configuration I set in /var/lib/lxc/mycontainer/rootfs/etc/network/interfaces, I cannot ping from mycontainer to any IP (including the host's) : ubuntu@mycontainer:~$ ping 92.281.86.226 PING 92.281.86.226 (92.281.86.226) 56(84) bytes of data. ^C --- 92.281.86.226 ping statistics --- 6 packets transmitted, 0 received, 100% packet loss, time 5031ms And my host cannot ping the container: root@host:~# ping 179.43.46.233 PING 179.43.46.233 (179.43.46.233) 56(84) bytes of data. ^C --- 179.43.46.233 ping statistics --- 5 packets transmitted, 0 received, 100% packet loss, time 4000ms My container's ifconfig: ubuntu@mycontainer:~$ ifconfig eth0 Link encap:Ethernet HWaddr 02:00:00:86:5b:11 inet addr:179.43.46.233 Bcast:255.255.255.255 Mask:0.0.0.0 inet6 addr: fe80::ff:fe79:5a31/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:64 errors:0 dropped:6 overruns:0 frame:0 TX packets:54 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4070 (4.0 KB) TX bytes:4168 (4.1 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:32 errors:0 dropped:0 overruns:0 frame:0 TX packets:32 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2496 (2.4 KB) TX bytes:2496 (2.4 KB) My host's ifconfig: root@host:~# ifconfig br0 Link encap:Ethernet HWaddr 4c:72:b9:43:65:2b inet addr:92.281.86.226 Bcast:91.121.67.255 Mask:255.255.255.0 inet6 addr: fe80::4e72:b9ff:fe43:652b/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1453 errors:0 dropped:18 overruns:0 frame:0 TX packets:1630 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:145125 (145.1 KB) TX bytes:299943 (299.9 KB) eth0 Link encap:Ethernet HWaddr 4c:72:b9:43:65:2b UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3178 errors:0 dropped:0 overruns:0 frame:0 TX packets:1637 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:298263 (298.2 KB) TX bytes:309167 (309.1 KB) Interrupt:20 Memory:fe500000-fe520000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:6 errors:0 dropped:0 overruns:0 frame:0 TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:300 (300.0 B) TX bytes:300 (300.0 B) vethtest Link encap:Ethernet HWaddr fe:0d:7f:3e:70:88 inet6 addr: fe80::fc0d:7fff:fe3e:7088/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:54 errors:0 dropped:0 overruns:0 frame:0 TX packets:67 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4168 (4.1 KB) TX bytes:4250 (4.2 KB) virbr0 Link encap:Ethernet HWaddr de:49:c5:66:cf:84 inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) I have disabled lxcbr0 (USE_LXC_BRIDGE="false" in /etc/default/lxc). root@host:~# brctl show bridge name bridge id STP enabled interfaces br0 8000.4c72b943652b no eth0 vethtest I have configured the IP 179.43.46.233 to point to 02:00:00:86:5b:11 in my hosting provider (OVH) config panel. (The IPs in this post are not the real ones.) Thanks for reading this long question! :-) Vianney

    Read the article

  • Slow http traffic between VMWare guest and host.

    - by toluju
    I have a web application running as an http server inside the VMWare guest OS, and I'm trying to access the content from the host OS. The guest is running Ubuntu, and the host is running Windows XP. The problem is, when I try to access the application from a browser in the host OS, the content takes a very long time to load (up to a minute for a single page). A browser in the guest OS can access the application with no problems. I've tried using both NAT and bridged networking, but the results are the same. The Windows firewall is turned off. The connection itself appears fine, as ping requests from guest to host as well as host to guest complete without errors or delays. Both guest and host can access the external Internet connection without a problem. I'm using VMWare Player. Any ideas?

    Read the article

  • Multiple SSH private keys for the same host

    - by Sencha
    How can I store 2 different private SSH keys for the same host? I have tried 2 entries in /etc/ssh/ssh_config for the same host with the different keys, and I've also tried to put both keys in the same file and referencing it from one hosts setting, however both do not work. More detail: I'm running Ubuntu server (12.04) and I want to connect to GitHub via SSH to download the latest source for my projects. There are multiple projects running on the same server and each project has a GitHub repo with it's own unique deloyment key-pair. So the host is always the same (github.com) but the keys need to be different depending on which repo I'm using. Different /etc/ssh/ssh_config versions I have tried: Host github.com IdentityFile /etc/ssh/my_project_1_github_deploy_key StrictHostKeyChecking no Host github.com IdentityFile /etc/ssh/my_project_2_github_deploy_key StrictHostKeyChecking no and this with both keys in the same file: Host github.com IdentityFile /etc/ssh/my_project_github_deploy_keys StrictHostKeyChecking no I've had no luck with either. Any help would be greatly appreciated!

    Read the article

  • nmap reports host up when it isn't

    - by martianway
    On an Ubuntu VM I ran: sudo nmap -sP 192.168.0.* This returned: Starting Nmap 5.00 ( http://nmap.org ) at 2010-12-28 22:46 PST Host 192.168.0.0 is up (0.00064s latency). Host 192.168.0.1 is up (0.00078s latency). Host 192.168.0.2 is up (0.00011s latency). . . . Host 192.168.0.254 is up (0.00068s latency). Host 192.168.0.255 is up (0.00066s latency). The problem is I only have 4 live machines on 192.168.0.* so why did nmap report every ip in the subnet has a live host? The ip address of the Ubuntu machine is 192.168.28.131 From this VM I can ping the live systems on my internal subnet 192.168.0.* and get the expected response. And if I ping a machine that doesn't exist I can get no response as expected.

    Read the article

  • Why can't all zeros in the host portion of IP address be used for a host?

    - by Grezzo
    I know that if I have a network 83.23.159.0/24 then I have 254 usable host IP addresses because: 83.23.159.0 (in binary: host portion all zeros) is the subnet address 83.23.159.1-254 are host addresses 83.23.159.255 (in binary: host portion all ones) is the broadcast address I understand the use for a broadcast address, but I don't understand what the subnet address is ever used for. I can't see any reason that an IP packet's destination address would be set to the subnet address, so why does the subnet itself need an address if it is never going to be the endpoint for AN IP flow? To me it seems like a waste to not allow this address to be used as a host address. To summarise, my questions are: Is an IP packet's destination ever set to the subnet IP address? If yes, in what cases and why? If no, then why not free up that address for any host to use?

    Read the article

  • How can I tell if a host is bridged and acting as a router

    - by makerofthings7
    I would like to scan my DMZ for hosts that are bridged between subnets and have routing enabled. Since I have everything from VMWare servers, to load balancers on the DMZ I'm unsure if every host is configured correctly. What IP, ICMP, or SNMP (etc) tricks can I use to poll the hosts and determine if the host is acting as a router? I'm assuming this test would presume I know the target IP, but in a large network with many subnets, I'd have to test many different combinations of networks and see if I get success. Here is one example (ping): For each IP in the DMZ, arp for the host MAC Send a ICMP reply message to that host directed at an online host on each subnet I think that there is a more optimal way to get the information, namely from within ICMP/IP itself, but I'm not sure what low level bits to look for. I would also be interested if it's possible to determine the "router" status without knowing the subnets that the host may be connected to. This would be useful to know when improving our security posture.

    Read the article

  • Host file in browser?

    - by acidzombie24
    Instead of changing my host file i'd like firefox to think my domain is on my own server while my other browser to use the real ip address. I use to edit my host files but that forces both browsers to change the ip address. I found change hostbut it doesnt appear to use the alternative host file. I also saw a comment asking when it will work on firefox 6+ I tried Host Admin and it fails. It works but the alternative IP address must be in your host file already (which i dont want) and it lets you deselect a domain so the host file is ignored. Not what i want.

    Read the article

  • apache virtual host concept and dns

    - by Subhransu
    I want to have around 60 repositories of projects and I want to serve them from a dedicated remote server(ubuntu) with the help of mercurial server so that all my developers will be able to update their changes. I have followed this article in order to do that but stocked in the Apache Configuration Step (section 2.5 2.5.4). I have some following questions: What are the steps I need to follow to make apache to serve /home/hg/repositories/private/hgweb.cgi when I enter dev.example.com/private ? Is my virtual host file is correct or do I need to change anything ? I bought the example.com and how to make it to serve dev.example.com/private. Do I need to add A name(like : subdomain.example.com and then IP of my server) in the cpannel of hosting company? ServerAdmin webmaster@localhost ServerName dev.example.com ScriptAlias /private /home/hg/repositories/private/hgweb.cgi <Directory /home/hg/repositories/private/> Options ExecCGI FollowSymlinks AddHandler cgi-script .cgi DirectoryIndex hgweb.cgi AuthType Basic AuthName "Mercurial repositories" AuthUserFile /home/hg/tools/hgusers Require valid-user </Directory> ErrorLog ${APACHE_LOG_DIR}/dev.example.com_error.log # Possible values include: debug, info, notice, warn, error, cr$ # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/dev.example.com_ssl_access.lo$ SSLEngine on SSLCertificateFile "/etc/apache2/ssl/dev.example.com.crt" SSLCertificateKeyFile "/etc/apache2/ssl/dev.example.com.k$ NOTE: The above is my virtual host file. I have not enabled the site yet and also not changed any host or hostname or httpd.conf file.

    Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >