Search Results

Search found 8450 results on 338 pages for 'mail gateway'.

Page 5/338 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • How to choose which network connection provides the default gateway in Windows XP

    - by Cathy
    I have a laptop with an integrated NIC and a WiFi connection. Both the wired and wireless networks I am using can access the Internet. Win XP is routing all traffic through the wireless network. I want to force it to route everything through the wired network when it is available (i.e. when I am sitting at my desk with the laptop docked) and through the wireless when that is the only option (i.e. when I have undocked my laptop and carried it to a conference room, or if I am out of the office working on a different WiFi network). The wireless connection cannot be established until after I am logged into Windows, so it's always the second network to become available to the OS. I have manually overridden the metric values in the TCP/IP configurations so that the NIC has metric 10 and the WiFi has metric 20. However, Windows is still picking the WiFi adapter's address as the Default Gateway, so this isn't helping. If I manually disable and re-enable the WiFi adapter, then it will switch the default gateway to the wired network and stay that way until I shutdown Windows. How can I tell Windows XP not to replace the default gateway when the WiFi connection is first enabled?

    Read the article

  • Enabling NAT forwarding using a second WAN interface and a second gateway on ubuntu

    - by nixnotwin
    I have 3 interfaces: eth0 192.168.0.50/24 eth1 10.0.0.200/24 eth2 225.228.123.211 The default gateway is 192.168.0.1 which I want to keep as it is in the changes I want to make. I want to masquerade eth1 10.0.0.200/24 and enable NAT forwarding to eth2. So I have done this: ip route add 225.228.123.208/29 dev eth2 src 225.228.123.211 table t1 ip route add default via 225.228.123.209 dev eth2 table t1 ip rule add from 225.228.123.211 table t1 ip rule add to 225.228.123.211 table t1 Now I can receive ping replies from any internet host if I did: ping -I eth2 8.8.8.8 To enable NAT forwarding I did this: sudo iptables -A FORWARD -o eth2 -i eth1 -s 10.0.0.0/24 -m conntrack --ctstate NEW -j ACCEPT sudo iptables -A FORWARD -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT sudo iptables -t nat -A POSTROUTING -o eth1 -j MASQUERADE But it isn't working. To test I used a client pc and put it on 10.0.0.0/24 network and gateway was set as 10.0.0.200. I want to have 192.168.0.1 as default gateway. And the traffic that comes in via eth1 10.0.0.200/24 should be forwarded to eth2 225.228.123.211. I have enabled forwarding on ubuntua also.

    Read the article

  • DHCPD (Slackware) - Disabling auto-generation of gateway as DNS server

    - by Dogbert
    Good day, I am using a Linux workstation on Slackware 13.37. One "problem" I have had to deal with ever since 11.0 is the following: DNS servers are queried and determined at startup by DHCP daemon (DHCPD) This is invoked at startup by a script located at /etc/rc.d/rc.dhcpd My DNS servers for my ISP are resolved correctly, and are stored in a list located at /etc/resolv.conf However, the one annoying problem is that my gateway IP (ie: 192.168.1.1) is always automatically put at the top of the list in resolv.conf, meaning I have to always wait for a timeout before a valid DNS server is used to resolve an address (ie: timeout on 192.168.1.1 because it is not actually a DNS server, then DHCP uses the next server in the list). I could lower my DNS resolution timeout so the gateway query times out quicker, but that's not what I want, as I don't want to degrade the abilities of legitimate DNS servers. What I would like to do is change how DHCPD operates so that it does NOT put my gateway IP address at the beginning of this list. I've searched via "man dhcpd", etc, and haven't found the exact answer yet. Any help on this issue is appreciated. Thank you all in advance for your time and assistance.

    Read the article

  • Mail.app doesn't detect sender in Address Book

    - by CoreSandello
    Hi there. I don't understand, how does 'smart addresses' in Mail.app work. Recently I mentioned, that for some emails I don't see person's full name in 'From' column. I started to dig into this behavior and found out, that I have few contacts in my Address Book, that are not recognized by Mail.app. Here how it looks: I have a person in Address Book with filled email entry and filled first/last name (localized). I have an incoming email from that person (from email specified in Address Book), but first/last name in the email itself doesn't match with ones specified in Address Book (e. g. 'From' field in email looks like 'John [work] <[email protected]>' while Address Book entry is 'John Smith' (localized, in Russian)). And Mail.app doesn't recognize that this mail is originating from that person in Address Book: if I click on 'From' field, it suggests to me to add sender to Address Book, while for others' emails I have 'Show in Address Book' menu entry (especially for ones with full localized name in 'From' field). I'm wondering, is that behavior correct or I'm missing something? I'm using Snow Leopard & Mail 4.0; my system language set to English, if that matters. I'd like to have some clarifications on that Mail.app behavior: whenever it fixable or not (and if it's fixable, I'd like to see a fix). By the way, is it possible to match sender's address against Address Book entry in filter rules or not? That would be great, if I can create rules like 'move all mail from that person to that folder' without specifying exact source address. Thanks, Ivan.

    Read the article

  • Mail.app doesn't detect sender in Address Book

    - by CoreSandello
    I don't understand, how does 'smart addresses' in Mail.app work. Recently I mentioned, that for some emails I don't see person's full name in 'From' column. I started to dig into this behavior and found out, that I have few contacts in my Address Book, that are not recognized by Mail.app. Here how it looks: I have a person in Address Book with filled email entry and filled first/last name (localized). I have an incoming email from that person (from email specified in Address Book), but first/last name in the email itself doesn't match with ones specified in Address Book (e. g. 'From' field in email looks like 'John [work] <[email protected]>' while Address Book entry is 'John Smith' (localized, in Russian)). And Mail.app doesn't recognize that this mail is originating from that person in Address Book: if I click on 'From' field, it suggests to me to add sender to Address Book, while for others' emails I have 'Show in Address Book' menu entry (especially for ones with full localized name in 'From' field). I'm wondering, is that behavior correct or I'm missing something? I'm using Snow Leopard & Mail 4.0; my system language set to English, if that matters. I'd like to have some clarifications on that Mail.app behavior: whenever it fixable or not (and if it's fixable, I'd like to see a fix). By the way, is it possible to match sender's address against Address Book entry in filter rules or not? That would be great, if I can create rules like 'move all mail from that person to that folder' without specifying exact source address. Thanks, Ivan.

    Read the article

  • postfix email gateway

    - by k-h
    I am setting up a postfix email gateway. It will not hold any mail but will accept email for my domain and forward it to another internal mailserver and relay mail out from the internal server. One of the main problems is that I am working on a live running system and this will be an upgrade so I am using a test domain which I will change at some point to the real domain. I tried various methods but found the simplest way (that worked) was to use a script to create an aliases file (from ldap entries). There are various problems with this method. The main one being that the entries can't be of the simple form [email protected] because the gateway doesn't know where to send them. They have to be of the form: [email protected]. What I would like doesn't seem hard but I can't get my head around the postfix documentation. There seem to be various ways but none of them seem to work. Most of the examples I have found on the web assume the mail is going to end up on the server. I want a list of users somewhere, preferably of the form: user1, user2, etc rather than [email protected] (I can easily generate this list) and I would like postfix to forward all email to example.com to a particular server: ie realmailserver.example.com. Can anyone suggest clues as to how I might do this?

    Read the article

  • Changing default gateway on workstations connected to Windows Domain SBS server

    - by Gary B2312321321
    We have xp workstations connected onto a small business server acting as active directory/isa firewall/proxy (no dhcp). Is there a reason that after installing a 2nd firewall on the network (same subnet etc), that changing the default gateway on the workstations isnt sufficient to route inet traffic through the new firewall? A freshly setup linux box connects straight on to the alternate firewall with just ip, default gateway. dns settings. Will having ISA still active on the network confuse the process? Are there further config settings deeper down in windows that need attention? Any ideas pointers on this would be appreciated? Other info: Firewalls tried: Smoothwall and Ipcop; small ethernet netwoork 40 pcs; can ping to new firwalls from workstations; activating web proxy on new firewall and reconfiguring workstation browser works fine; Point of 2nd firewall is lack of some necessary features on ISA for a linux app; Would be nice to have some redundancy to though

    Read the article

  • IP tables gateway

    - by WojonsTech
    I am trying to make an iptables gateway. I ordered 3 dedicated server from my hosting company all with dual nics. One server has been given all the ip addresses and is connected directly to the internet and has its other nic connected to a switch where the other servers are all connected also. I want to setup iptables so for example the ip address 50.0.2.4 comes into my gateway server it fowards all the traffic to a private ip address using the second nic. This way the second nic can do what ever it needs and can respond back also. I also want it setup that if any of the other servers needs to download anything over the inernet it is able to do so and by using the same ip address that is used for its incomming traffic. Lastly I would like to be able to setup dns and other needed networking stuff that i maybe not thinking about.

    Read the article

  • SMS gateway with a "from" parameter

    - by user37220
    Hello, I am programming a mobile app which send sms. I need a gateway that let me put a "from" parameter. On many gateways, I can only subscribe, put my mobile phone number as the sender after a verification process. The main problem is that the phone number verification is only available for my and not for my users. My customers can send an sms but the receiver does not see their mobile phone number in the "from" field. Do you know a good gateway which support that (in an automated way) ? Thank you for your help.

    Read the article

  • How to tell Windows 7 to ignore a default gateway

    - by zildjohn01
    I currently have 2 network cards in my PC -- one connected to an internal network on a router with a disconnected WAN port (10.x.x.x), and one connected to the internet through a consumer router (192.168.0.x). Windows seems to recognize them correctly (my "Network and Sharing Center" lists them as "No Internet" and "Internet" respectively), however when I try browsing the internet it always tries the internal network's default gateway, rather than the one with internet access. Trying to ping a website results in "Reply from 10.0.0.1: Destination net unreachable.". A simple "route delete 0.0.0.0 mask 0.0.0.0 10.0.0.1" fixes the problems, but they return upon reboot, or upon renewing my IP. Is there any way to tell Windows to ignore one NIC's default gateway, or to at least give them priorities?

    Read the article

  • What is the Best Free Linux Gateway

    - by rockinthesixstring
    I'm looking at moving away from using my DIR-825 as a gateway and moving into a Linux box to do it all for me. I've found IPCop, but I'm looking for something with a little more power. My main goal is basically to be able to point different external domain names to different internal servers. backup.example.com - 192.168.0.5 home.example.com - 192.168.0.1 I host my DNS on my own dedicated server (windows), so I don't know much about doing the gateway thing in my home (my hosting provider does it all for me). Do any of you know of any free Linux Distros that can accomplish what I'm looking for?

    Read the article

  • VPN doesn't have access to drives unless I use the default gateway

    - by Seb
    I am trying to setup a VPN connection on one of our office servers so that many of our employees can access our drives when out of town or for important business meetings. However I have a weird glitch in where if the default gateway option is checked they can see the drives and files, but get no internet access. If I have the default gateway option unchecked then they have there internet and can successfully connect to the VPN, but they are not able to see any of the drives or files. The server is running Windows Server 2003 Standard while the employees run either XP or 7 Professional. Any help is greatly appreciated. Thank you. EDIT The VPN setup is PPTP and the main server is behind a SonicWall if that is of any importance.

    Read the article

  • Ubuntu 12.04 Transparent proxy gateway

    - by user146536
    i have a ubuntu server which i want to use as a transparent proxy, (i have no issue setting up squid, just the iptables. The server only has one network interface. The server sits on the same subnet as the router which is the current gateway to the internet for clients, i want to simply set the gateway on the clients pointing at the transparent proxy which in turn forwards the requests to the router and off to the internet. See me diagram, can anybody offer to help with the iptables configuration to achieve this scenario? subnet mask /22 Router(10.4.12.1) Transparent Proxy (eth0, 10.4.12.2) | | +----+----+---------+----+----+ | | | | Comp1(10.4.12.6) Comp2(10.4.12.5) Comp3(10.4.12.4) Comp4(10.4.12.3) Thanks

    Read the article

  • OpenBSD: Gateway outside subnet (works in Linux)

    - by kshade
    We need to set up an OpenBSD host to use a default gateway that's outside of it's subnet. This is all I need to do on Linux (not the actual IPs) to achieve it: ifconfig eth0 33.33.33.33/31 up route add 33.33.33.254 dev eth0 route add default gw 33.33.33.254 The problem is that we don't know the proper equivalent of the middle command in OpenBSD. The man page says: If the destination is directly reachable via an interface requiring no intermediary system to act as a gateway, the -iface modifier should be specified; Sadly we can't seem to figure out how to make it work with that. This is a virtual host on an OVH server, they have documentation for many other operating systems showing how to do it here: http://help.ovh.co.uk/BridgeClient

    Read the article

  • To get Mail work for `git am`

    - by Masi
    I use Gmail and Mac's Mail for emails. It seems that you can use git am only with a terminal's Mail in OS X/Ubuntu. I apparently need to set up my ~/.mailrc such that # gmail account account gmail { set from="[email protected] (Masi Masi)" set sendmail="/usr/bin/msmtp" set message-sendmail-extra-arguments="-a gmail" } I run mail [email protected] I get Unknown command: "account" How can you use Gmail for Mail such that I get my mails' patches to git am?

    Read the article

  • Mac Mail import from Entourage failed

    - by elhombre
    I am trying to import the entire Folder-structure from Entourage 2008 to Mac Mail on a Mac OS X 10.5.8. First I wanted to export the whole E-Mail Database from Entourage to Desktop as a .rge File. The export got aborted through a message which indicated that my Entourage database is corrupt and that I should rebuild it. I then went over to Mac Mail and imported the Entourage Folder-structure through File/import mailboxes.../Entourage. The bulky import did take some time and the progress bar never reached its full length. But at the end the import was successful. When I checked the imported folder-structure in Mac Mail I noticed that quiet a few Subfolders where missing. I checked Console and saw following message. Mail[2899] Applescript Error: aliasForMailImporter got an error: AppleEvent handler failed. Question: What does that mean and what can I do to get my subfolder-structure over completely?

    Read the article

  • Word 2010 & Outlook 2007 - HTML Mail Merge Doesn't Work, Plain Text and Attachments do

    - by Prejay
    Hopefully someone has an answer or fix for this. When using Outlook 2007 & Word 2007 or Word 2010 & Outlook 2010, Mail merging Works fine. However there are some systems that have Word 2010 and Outlook 2007 installed. In these cases, Mail Merging to HTML Emails doesn't do anything. If i choose to Mail Merge to Plain text emails or attachments, these go through Outlook. Only HTML Email doesn't work. Now, something like Mapi Labs Mail Merge toolkit is abole to get around this, but I was wondering if there was any statement/solution on cross version support for HTML Mail Merging from Microsoft.

    Read the article

  • Setting up Mail (Ubuntu Server 10.04)

    - by Sam
    It seems that mail on my server is functional -- kind of. I have a simple PHP mailer script that is capable of mailing any email address that is not local. e.g [email protected] However, if I try [email protected], it tells me /home/myuser/dead.letter... Saved message in /home/myuser/dead.letter and sometimes You have new mail. What does this mean? Does anyone know what I can do to make my emails actually go through? I'm using google apps for domains -- so basically gmail is hosting my domain's email and I'm not using my own servers for receiving mail. I've set up the nameservers correctly -- I wonder if it's got to do with my sending configuration (what does PHP's mail function normally send with anyway, sendmail?) or maybe it's my receiving configuration -- maybe something makes it act differently for "local" mail

    Read the article

  • Windows 7, network connection with no default gateway: any way to change the "Unknown network" statu

    - by e-t172
    Hi, I have a computer running Windows 7 Pro RTM. This computer has two network connections: A Wi-fi connection to the Internet (through a home router) which works just fine. An OpenVPN virtual network connection. More precisely, this is a virtual Ethernet connection which behaves exactly like a physical Ethernet wired connection. My problem is that the "Network and sharing center" shows "Unknown network" for the OpenVPN connection. After some research I found that logical networks (outside a domain) are identified by the MAC address of the default gateway of the connection. Problem is, the OpenVPN connection has no default gateway: it is a private network, so I don't need one... Consequently, the "Unknown network" is always considered public, so the firewall is always in "public mode", which I don't want. Plus, I can't rename "Unknown connection" or anything (which makes sense), so it is kinda ugly. My goal is to define a proper logical network for the OpenVPN connection with the private profile. I know of some workarounds (disable the firewall, modify security policy to make all unknown networks "private") but they're still workarounds. I just want my clients to connect to the VPN without having to disable their firewall settings, without changing global configuration with potential side-effects (the "security policy" solution) and without having to look at an ugly "Unknown connection" in the Network and sharing center. Is there any way I can do this? I tried to check what was going on in the registry (HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkList is interesting), but I still didn't find a way to "force" the OpenVPN connection to be assigned to a logical network. Any help would be very appreciated. A related question showed up at Superuser: http://superuser.com/questions/37355/windows-7-cant-identify-network/37422

    Read the article

  • open source solution to a gateway for a network of a housing cooperative of 150 people

    - by SirDinosaur
    i just inherited a barely functioning network for a student housing cooperative of about 150 people. in it's current state, as i understand it from the previous person in charge of the network, we have working wireless access points and working ethernet cords going to working gigabit switches going to a barely functioning gateway (right now a simple home router) to one of three possible outbound connections. it is possible to connect to the network through the wireless or ethernet, but especially during peak hours, packets / connections are likely dropped or otherwise get no response. my intuition tells me to replace the gateway with something that can handle multiple outbound connections (WAN) and one inbound connection (LAN), while the rest of the network seems suitable for now. i'm somewhat knowledgable in Linux (been using Debian after first Arch Linux) and i want to use as much open source as possible, but i'm confused whether or not a simple server that i could easily understand will work for this situation. do i need specialized hardware to handle the switching more effectively? if so, what are my options? (i found this, thoughts?) or if a Debian server would work, anything else i should about the specs required for this type of server? also links to any useful information on using open source to maintain this type of network would be most appreciated. <3 P.S. crossposted http://redd.it/yybp2.

    Read the article

  • How to make my Ubuntu an internet gateway for my Android phone

    - by yacine
    I want to use the internet of my school on my Android, the problem is they have a Squid proxy, and many applications on my phone don't use the proxy at all. The obvious solution is to install a transparent proxy on my Android to force all applications to connect through it. The problem is that I need to root the phone to make it work, and I don't want to do it because it's not really my phone and rooting is a little risky- Another solution, which is safer, is to make my computer run as a gateway, so I put my Ubuntu IP in the gateway parameter of the phone. I'm running a small proxy on my ubuntu (cntlm), so I redirect the Android traffic to it. I did it with "iptables" as follows: iptables -t nat -A PREROUTING -s 10.0.1.118 -p tcp -j REDIRECT --to-ports 8888 iptables -t nat -A PREROUTING -s 10.0.1.118 -p udp -j REDIRECT --to-ports 8888 10.0.1.118 is the IP of the phone, 8888 is the port of cntlm (proxy on my PC). Now, on the phone: When I enter www.google.com on the navigator I get nothing (web site not found, error message of Firefox). But, when I enter http://74.125.143.101 (IP of Google) I get an error message from the school proxy (so it worked in some way – my PC redirected the traffic of the phone to the Squid proxy). The error message is : The requested URL could not be retrieved while trying to process the request get / http/1.1 host 74.125.143.101 user-Agent ... ... I think the problem is in the "GET" header,it should be GET 74.125.143.101 HTTP/1.1. But I don't understand what's happening, and I'm a certified CCNA.

    Read the article

  • Gateway Page Between ASP and an ASP.NET Page

    - by ajdams
    I'll admit, I am pretty new with ASP .NET programming and I have been asked to take all our gateway pages (written in classic ASP) and make one universal gateway page to the few C# .NET applications we have (that I wrote). I tried searching here and the web and couldn't find much of anything describing a great way to do this and figured I was either not searching properly or was not properly naming what I am trying to do. I decided to to take one of the main gateway pages we had in classic ASP and use that as a base for my new gateway. Without boring you with a bunch of code I will summarize my gateway in steps and then can take advice/critique from there. EDIT: Basically what I am trying to do is go from a classic ASP page to a ASP .NET page and then back again. EDIT2: If my question is still unclear I am asking if what I have an the right start and if anyone has suggestions as to how this could be better. It can be as generic as need-be, not looking for a specific off-the-shelf code answer. My Gateway page: In the first part of the page I grab session variables and determine if the user is leaving or returning through the gateway: Code (in VB): uid = Request.QueryString("GUID") If uid = "" Then direction = "Leaving" End If ' Gather available user information. userid = Session("lnglrnregid") bankid = Session("strBankid") ' Return location. floor = Request.QueryString("Floor") ' The option chosen will determine if the user continues as SSL or not. ' If they are currently SSL, they should remain if chosen. option1 = Application(bankid & "Option1") If MID(option1, 6, 1) = "1" Then sslHttps = "s" End If Next I enter the uid into a database table (SQL-Server 2005) as a uniqueidentifier field called GUID. I omitted the stored procedure call. Lastly, I use the direction variable to determine if the user is leaving or returning and do redirects from there to the different areas of the site. Code (In VB again): If direction = "Leaving" Then Select Case floor Case "sscat", "ssassign" ' A SkillSoft course Response.Redirect("Some site here") Case "lrcat", "lrassign" ' A LawRoom course Response.Redirect("Some site here") Case Else ' Some other SCORM course like MindLeaders or a custom upload. Response.Redirect("Some site here") End Select Session.Abandon Else ' The only other direction is "Returning" ..... That's about it so far - so like I said, not an expert so any suggestions would be greatly appreciated!

    Read the article

  • Using ClearOS as a gateway/firewall/mailserver

    - by Elzenissimo
    Hi, Just installed ClearOS on a PC to act as our firewall firstly and then to act as an internal mailserver. My question is: Can i create a mailserver that then routes the mail through to our ISP mail server without having to contact the ISP and gain MX records etc..? We are a small business (5 PCs + dataserver) and the reason this is interesting is because we need to keep a record of outgoing mails from certain users, as well as spam and virus filtering.

    Read the article

  • Mail Secure & Stable Open Source Mail Server

    - by Fanar ALHAYALI
    I have asked question on http://stackoverflow.com/questions/9868426/i-need-to-know-which-email-server-i-have-to-use and someone tell me my question would be better on serverfault. I know that this is a common question and asked many times. but there are so many available mail servers that i am not able to decide the one. Kindly tell that which is the Secure, Stable and fast open source mail server for Centos or Redhat Server. Is there any guide which can be used to deploy the mail server with all its components e.g. smtp, pop3, imap, spam, calender server, antivirus, DNS Setting. Currently I'm using sun messaging V6 which installed on Solaris 10 and my boss ask me to make a report for the best mail server today in the marketing? I tried to have a look on Google but I couldn't find interesting information for my report. Any advice would be appreciated.

    Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >