Search Results

Search found 24253 results on 971 pages for 'multiple monitor'.

Page 5/971 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Second monitor not detected

  - by Gabriel

  Hi I have two VGA monitors, my GPU is ATI PowerColor 6850 which has two DVI slots, I use adapters for both VGA monitors. If I connect any the two monitors in the first slot it will work right away (along the plugin confirmation sound). And if I connect any of both monitors to the second slot I won't get anything, nor a signal or confirmation sound. I also tried auto detecting via Catalyst Control Center and Windows Desktop Resolution. I have the latest drivers installed. EDIT: I found this on the Spec Description: Display Connectors DL-DVI-I/SL-DVI-D And in NewEgg: 2 x DVI (1 Single Link, 1 Dual Link) Could this have anything to do with my issue?

  Read the article

• Program opens on disconnected and invisible monitor [closed]

  - by FiveO

  Possible Duplicate: Recover Windows Opening Off Screen? I'm working with a HP Elitebook 8460p with Windows 8 using always 2 Monitors connected. And some Programs I'm always opening on the second screen (which windows does automatically). But now the problem: When the screens aren't connected (when I'm at home), some programs still open on the second screen (which does not exist anymore) and it's just not possible to move them to the main (only!) screen! Does some one knows a solution for the problem - already bringing back the windows to the main screen would be enough. Thanks

  Read the article

• Can no longer duplicate display to external monitor on Windows 7

  - by rbeier

  We have a large TV at work - I connect my laptop to it to share my screen during meetings. Until today, my laptop display has been duplicating to the TV automatically when I connect the TV cable to the laptop. The display resolution would decrease automatically to be compatible with the TV. Today, however, it's stopped working. When I connect the cable to the TV, the display extends rather than duplicating. Using the Win+P key combination (or Fn+F7 on my Lenovo laptop), I can choose to duplicate the display - but when I do this, it ends up only displaying on the laptop. I can get it to display on the TV by hitting Win+P and choosing "projector only", but then I can't see what I'm doing on the laptop screen. I have a Lenovo W520 laptop running Windows 7, connected to the TV using a DisplayPort-to-HDMI converter cable. The TV's native resolution is 1280x720; the laptop's native resolution is 1600x900. I've tried booting with the TV cable already connected; I've tried manually lowering the display resolution on the laptop to 1280x720 before duplicating the display. Neither works. Does anyone have any other suggestions?

  Read the article

• What is Peformance Monitor telling me when my page faults / second are high?

  - by David Robison

  I have a Windows 7 x64 computer that is having performance issues. After some investigation, I have discovered that the page faults / second on it, as reported by Performance Monitor, are really high. Everything else seems to be normal. Resource Monitor reports no hard faults and lots of available memory. Is this a potential cause for problems, or is it a red herring? If it is something that could be causing problems, what should I do next to figure out what is causing it? Here is a screen shot of the Performance Monitor. Notice that the average page faults / second is 75,887. On another computer that does not have problems, this number is closer to 3,000. Here is a screen shot of the Resource Monitor, sorted by hard faults / second, which is currently 0 for all processes.

  Read the article

• Desktop Fun: Triple Monitor Wallpaper Collection Series 1

  - by Asian Angel

  Triple monitor setups provide spacious amounts of screen real-estate but can be extremely frustrating to find good wallpapers for. Today we present the first in a series of wallpaper collections to help decorate your triple monitor setup with lots of wallpaper goodness. Note: Click on the picture to see the full-size image—these wallpapers vary in size so you may need to crop, stretch, or place them on a colored background in order to best match them to your screen’s resolution. Special Note: The screen resolution sizes available for each of these wallpapers has been included to help you match them up to your individual settings as easily as possible. All images shown here are thumbnail screenshots of the largest size available for download. Available in the following resolutions: 3840*1024, 4096*1024, 4320*900, 4800*1200, 5040*1050, and 5760*1200. Available in the following resolutions: 4800*1200. Available in the following resolutions: 3840*960, 3840*1024, 4096*1024, 4320*900, and 4800*1200. Available in the following resolutions: 3840*960, 3840*1024, 4096*1024, 4320*900, and 4800*1200. Available in the following resolutions: 3840*960, 3840*1024, 4096*1024, 4320*900, 4800*1200, 5040*1050, and 5760*1200. Available in the following resolutions: 3840*960, 3840*1024, 4096*1024, 4320*900, and 4800*1200. Available in the following resolutions: 3840*960, 3840*1024, 4096*1024, 4320*900, 4800*1200, and 5040*1050. Available in the following resolutions: 3840*960, 3840*1024, 4096*1024, 4320*900, 4800*1200, and 5040*1050. Available in the following resolutions: 3840*960, 3840*1024, 4096*1024, 4320*900, and 4800*1200. Available in the following resolutions: 3840*960, 3840*1024, 4096*1024, 4320*900, 4800*1200, and 5040*1050. Available in the following resolutions: 3840*960, 3840*1024, 4096*1024, 4800*1200, and 5040*1050. Available in the following resolutions: 3840*960, 3840*1024, 4096*1024, 4320*900, 4800*1200, 5040*1050, 5760*1200, and 7680*1600. Available in the following resolutions: 3840*960, 3840*1024, 4096*1024, 4320*900, 4800*1200, 5040*1050, and 5760*1200. Available in the following resolutions: 5760*1200. Available in the following resolutions: 5760*1200. More Triple Monitor Goodness Beautiful 3 Screen Multi-Monitor Space Wallpaper Span the same wallpaper across multiple monitors or use a different wallpaper for each. Dual Monitors: Use a Different Wallpaper on Each Desktop in Windows 7, Vista or XP For more wallpapers be certain to see our great collections in the Desktop Fun section. Latest Features How-To Geek ETC How to Upgrade Windows 7 Easily (And Understand Whether You Should) The How-To Geek Guide to Audio Editing: Basic Noise Removal Install a Wii Game Loader for Easy Backups and Fast Load Times The Best of CES (Consumer Electronics Show) in 2011 The Worst of CES (Consumer Electronics Show) in 2011 HTG Projects: How to Create Your Own Custom Papercraft Toy Firefox 4.0 Beta 9 Available for Download – Get Your Copy Now The Frustrations of a Computer Literate Watching a Newbie Use a Computer [Humorous Video] Season0nPass Jailbreaks Current Gen Apple TVs IBM’s Jeopardy Playing Computer Watson Shows The Pros How It’s Done [Video] Tranquil Juice Drop Abstract Wallpaper Pulse Is a Sleek Newsreader for iOS and Android Devices

  Read the article

• SQL Monitor’s data repository

  - by Chris Lambrou

  As one of the developers of SQL Monitor, I often get requests passed on by our support people from customers who are looking to dip into SQL Monitor’s own data repository, in order to pull out bits of information that they’re interested in. Since there’s clearly interest out there in playing around directly with the data repository, I thought I’d write some blog posts to start to describe how it all works. The hardest part for me is knowing where to begin, since the schema of the data repository is pretty big. Hmmm… I guess it’s tricky for anyone to write anything but the most trivial of queries against the data repository without understanding the hierarchy of monitored objects, so perhaps my first post should start there. I always imagine that whenever a customer fires up SSMS and starts to explore their SQL Monitor data repository database, they become immediately bewildered by the schema – that was certainly my experience when I did so for the first time. The following query shows the number of different object types in the data repository schema: SELECT type_desc, COUNT(*) AS [count] FROM sys.objects GROUP BY type_desc ORDER BY type_desc;  type_desccount 1DEFAULT_CONSTRAINT63 2FOREIGN_KEY_CONSTRAINT181 3INTERNAL_TABLE3 4PRIMARY_KEY_CONSTRAINT190 5SERVICE_QUEUE3 6SQL_INLINE_TABLE_VALUED_FUNCTION381 7SQL_SCALAR_FUNCTION2 8SQL_STORED_PROCEDURE100 9SYSTEM_TABLE41 10UNIQUE_CONSTRAINT54 11USER_TABLE193 12VIEW124 With 193 tables, 124 views, 100 stored procedures and 381 table valued functions, that’s quite a hefty schema, and when you browse through it using SSMS, it can be a bit daunting at first. So, where to begin? Well, let’s narrow things down a bit and only look at the tables belonging to the data schema. That’s where all of the collected monitoring data is stored by SQL Monitor. The following query gives us the names of those tables: SELECT sch.name + '.' + obj.name AS [name] FROM sys.objects obj JOIN sys.schemas sch ON sch.schema_id = obj.schema_id WHERE obj.type_desc = 'USER_TABLE' AND sch.name = 'data' ORDER BY sch.name, obj.name; This query still returns 110 tables. I won’t show them all here, but let’s have a look at the first few of them:  name 1data.Cluster_Keys 2data.Cluster_Machine_ClockSkew_UnstableSamples 3data.Cluster_Machine_Cluster_StableSamples 4data.Cluster_Machine_Keys 5data.Cluster_Machine_LogicalDisk_Capacity_StableSamples 6data.Cluster_Machine_LogicalDisk_Keys 7data.Cluster_Machine_LogicalDisk_Sightings 8data.Cluster_Machine_LogicalDisk_UnstableSamples 9data.Cluster_Machine_LogicalDisk_Volume_StableSamples 10data.Cluster_Machine_Memory_Capacity_StableSamples 11data.Cluster_Machine_Memory_UnstableSamples 12data.Cluster_Machine_Network_Capacity_StableSamples 13data.Cluster_Machine_Network_Keys 14data.Cluster_Machine_Network_Sightings 15data.Cluster_Machine_Network_UnstableSamples 16data.Cluster_Machine_OperatingSystem_StableSamples 17data.Cluster_Machine_Ping_UnstableSamples 18data.Cluster_Machine_Process_Instances 19data.Cluster_Machine_Process_Keys 20data.Cluster_Machine_Process_Owner_Instances 21data.Cluster_Machine_Process_Sightings 22data.Cluster_Machine_Process_UnstableSamples 23… There are two things I want to draw your attention to: The table names describe a hierarchy of the different types of object that are monitored by SQL Monitor (e.g. clusters, machines and disks). For each object type in the hierarchy, there are multiple tables, ending in the suffixes _Keys, _Sightings, _StableSamples and _UnstableSamples. Not every object type has a table for every suffix, but the _Keys suffix is especially important and a _Keys table does indeed exist for every object type. In fact, if we limit the query to return only those tables ending in _Keys, we reveal the full object hierarchy: SELECT sch.name + '.' + obj.name AS [name] FROM sys.objects obj JOIN sys.schemas sch ON sch.schema_id = obj.schema_id WHERE obj.type_desc = 'USER_TABLE' AND sch.name = 'data' AND obj.name LIKE '%_Keys' ORDER BY sch.name, obj.name;  name 1data.Cluster_Keys 2data.Cluster_Machine_Keys 3data.Cluster_Machine_LogicalDisk_Keys 4data.Cluster_Machine_Network_Keys 5data.Cluster_Machine_Process_Keys 6data.Cluster_Machine_Services_Keys 7data.Cluster_ResourceGroup_Keys 8data.Cluster_ResourceGroup_Resource_Keys 9data.Cluster_SqlServer_Agent_Job_History_Keys 10data.Cluster_SqlServer_Agent_Job_Keys 11data.Cluster_SqlServer_Database_BackupType_Backup_Keys 12data.Cluster_SqlServer_Database_BackupType_Keys 13data.Cluster_SqlServer_Database_CustomMetric_Keys 14data.Cluster_SqlServer_Database_File_Keys 15data.Cluster_SqlServer_Database_Keys 16data.Cluster_SqlServer_Database_Table_Index_Keys 17data.Cluster_SqlServer_Database_Table_Keys 18data.Cluster_SqlServer_Error_Keys 19data.Cluster_SqlServer_Keys 20data.Cluster_SqlServer_Services_Keys 21data.Cluster_SqlServer_SqlProcess_Keys 22data.Cluster_SqlServer_TopQueries_Keys 23data.Cluster_SqlServer_Trace_Keys 24data.Group_Keys The full object type hierarchy looks like this: Cluster Machine LogicalDisk Network Process Services ResourceGroup Resource SqlServer Agent Job History Database BackupType Backup CustomMetric File Table Index Error Services SqlProcess TopQueries Trace Group Okay, but what about the individual objects themselves represented at each level in this hierarchy? Well that’s what the _Keys tables are for. This is probably best illustrated by way of a simple example – how can I query my own data repository to find the databases on my own PC for which monitoring data has been collected? Like this: SELECT clstr._Name AS cluster_name, srvr._Name AS instance_name, db._Name AS database_name FROM data.Cluster_SqlServer_Database_Keys db JOIN data.Cluster_SqlServer_Keys srvr ON db.ParentId = srvr.Id -- Note here how the parent of a Database is a Server JOIN data.Cluster_Keys clstr ON srvr.ParentId = clstr.Id -- Note here how the parent of a Server is a Cluster WHERE clstr._Name = 'dev-chrisl2' -- This is the hostname of my own PC ORDER BY clstr._Name, srvr._Name, db._Name;  cluster_nameinstance_namedatabase_name 1dev-chrisl2SqlMonitorData 2dev-chrisl2master 3dev-chrisl2model 4dev-chrisl2msdb 5dev-chrisl2mssqlsystemresource 6dev-chrisl2tempdb 7dev-chrisl2sql2005SqlMonitorData 8dev-chrisl2sql2005TestDatabase 9dev-chrisl2sql2005master 10dev-chrisl2sql2005model 11dev-chrisl2sql2005msdb 12dev-chrisl2sql2005mssqlsystemresource 13dev-chrisl2sql2005tempdb 14dev-chrisl2sql2008SqlMonitorData 15dev-chrisl2sql2008master 16dev-chrisl2sql2008model 17dev-chrisl2sql2008msdb 18dev-chrisl2sql2008mssqlsystemresource 19dev-chrisl2sql2008tempdb These results show that I have three SQL Server instances on my machine (a default instance, one named sql2005 and one named sql2008), and each instance has the usual set of system databases, along with a database named SqlMonitorData. Basically, this is where I test SQL Monitor on different versions of SQL Server, when I’m developing. There are a few important things we can learn from this query: Each _Keys table has a column named Id. This is the primary key. Each _Keys table has a column named ParentId. A foreign key relationship is defined between each _Keys table and its parent _Keys table in the hierarchy. There are two exceptions to this, Cluster_Keys and Group_Keys, because clusters and groups live at the root level of the object hierarchy. Each _Keys table has a column named _Name. This is used to uniquely identify objects in the table within the scope of the same shared parent object. Actually, that last item isn’t always true. In some cases, the _Name column is actually called something else. For example, the data.Cluster_Machine_Services_Keys table has a column named _ServiceName instead of _Name (sorry for the inconsistency). In other cases, a name isn’t sufficient to uniquely identify an object. For example, right now my PC has multiple processes running, all sharing the same name, Chrome (one for each tab open in my web-browser). In such cases, multiple columns are used to uniquely identify an object within the scope of the same shared parent object. Well, that’s it for now. I’ve given you enough information for you to explore the _Keys tables to see how objects are stored in your own data repositories. In a future post, I’ll try to explain how monitoring data is stored for each object, using the _StableSamples and _UnstableSamples tables. If you have any questions about this post, or suggestions for future posts, just submit them in the comments section below.

  Read the article

• Incorrect monitor colours

  - by PedroGabriel

  I'm using Ubuntu 11.10 and my monitor had a problem where Green is the bright colour, there's no way to change it in the monitor settings, so when I was using WinXP (I'm new in here) I changed the green to lower using Video Driver settings, in here (ubuntu) I don't know exactly how I would change the green colour to low, so my "black" would be seem has a real black, no green. Thanks for reading. Sorry for bad English.

  Read the article

• Monitor blinks frequently

  - by Eric J.

  I recently resolved an issue that was causing one monitor not to be recognized by Windows by running a tool called Driver Sweeper to remove all old driver remnants, then updating to the latest nVidia drivers. Prior to that procedure the main monitor worked fine. After that procedure (now with the second monitor recognized), the main monitor blinks frequently. About once every 15-30 seconds, the monitor goes dark for the blink of an eye. Sometimes it only appears to happen in the bottom portion of the monitor, but other times it seems to affect the whole screen. Can this be caused by the particular driver? Could it just be an unlucky coincidence and the main monitor is starting to fail? I hesitate to experiment with new driver versions after having just restored the second monitor to a working state, so hope for some feedback before heading down that road.

  Read the article

• Ubuntu 10.04 LTS - Dual monitor works only sometimes (ATI multi-desktop)

  - by Beres Botond

  I've been using my laptop with an external LCD monitor attached to it at work (Philips 201E). And at home with a different external monitor (Samsung 2032BW). I have an ATI graphics card (HD3450), with Ati Catalyst drivers enabled and I'm using the Single display desktop (Multi-Desktop) seeting. At work I have the external monitor on the left and laptop on the right, while at home the other way around. So when I switch between the two setups, I just needed to go to Ati Catalyst Control Center, change the order of the displays, change the resolution (Home - 1680x1050, Work - 1440x900), reboot and it was all fine. But since a while it doesn't work properly anymore: At home it still works fine. At work it doesn't work. Sometimes it works for some reason, after a few resolution/setting changes in ACCC and reboots... it's very strange and annoying. With the home monitor I can see the whole bootup process on both monitors (laptop + LCD) and it always just works fine. With the work monitor on the external LCD monitor I just see "No video input" until I get to the login screen, then it shows up there as well. But after login it will either: Flicker a few times, but then work OK. Or (more often) Flicker once and then go back to "No video input" again. I usually end up rebooting a few times until it works. Does anyone have any idea for fixing it? This is my xorg.conf currently: Section "ServerLayout" Identifier "amdcccle Layout" Screen 0 "amdcccle-Screen[6]-0" 0 0 Screen "amdcccle-Screen[6]-1" 1280 0 EndSection Section "Files" EndSection Section "Module" Load "glx" EndSection Section "ServerFlags" Option "Xinerama" "off" EndSection Section "Monitor" Identifier "0-LVDS" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1280x768" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "0-CRT1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" Option "PreferredMode" "1440x900" EndSection Section "Device" Identifier "Default Device" Driver "fglrx" EndSection Section "Device" Identifier "amdcccle-Device[6]-0" Driver "fglrx" Option "Monitor-LVDS" "0-LVDS" BusID "PCI:6:0:0" EndSection Section "Device" Identifier "amdcccle-Device[6]-1" Driver "fglrx" Option "Monitor-CRT1" "0-CRT1" BusID "PCI:6:0:0" Screen 1 EndSection Section "Screen" Identifier "Default Screen" DefaultDepth 24 SubSection "Display" Virtual 2560 1024 EndSubSection EndSection Section "Screen" Identifier "amdcccle-Screen[6]-0" Device "amdcccle-Device[6]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "amdcccle-Screen[6]-1" Device "amdcccle-Device[6]-1" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

  Read the article

• VGA no signal on LCD monitor attached to laptop

  - by Paul

  I bought a new Asus vh242h LCD monitor for use with my lenevo T60 laptop running XP professional. Display info under control panel says "Intel(R) 945GM Express Chipset Family". I am connecting via VGA. When I connect the monitor I get "VGA no signal" and the monitor screen stays blank. I have selected the monitor as the display device on the laptop. The information on the monitor displays the correct screen resolution from the laptop, so the monitor is communicating in some way with the laptop. I've successfully tried the monitor with my Dell inspirion 1525 running Windows Vista. I've change the VGA cable to one I know works. Tried different resolutions. I cannot find and specific drivers on the internet for this monitor, so I assume it should work with Plug and Play. Does anyone know what the problem could be?

  Read the article

• Output to TV only works if monitor is plugged in

  - by Greg Sansom

  I am trying to use my TV as the sole output for a computer. The computer has a graphics card with 2 outputs - one RGB and one DVI. I have the RGB output going to the TV, and when the DVI output is connected to a monitor, display works fine on both the monitor and the TV. If I turn off the monitor, or even turn off power to the monitor, the TV continues to display the desktop. If I unplug the DVI cable from the monitor (remember that the monitor doesn't have any power at this point), the TV stops presenting the desktop and displays a "Not Accepted" message. When starting up the computer, the TV displays fine, but stops working at the "press ctrl-alt-delete" screen unless the monitor is connected. How can I make the TV show the display without the monitor? The TV is an LG RT-42PZ45V. The graphics card is an ATI Radeon series HD4350 512MB GDDR2. The computer is running Windows Server 2008 r2.

  Read the article

• Laptop with Intel Graphics: external VGA monitor only gets signal on boot (no "hot plugging")

  - by iveand

  I am able to get an external VGA monitor (or projector) to work if I start my laptop with it connected. However, if I start the laptop with it disconnected there is no signal on the external. The Displays screen shows the external, and thinks that it is active, but there is no signal being sent to it. This has been a persistent problem since 10.04 (I am now on 12.04.... each upgrade hoping something is improved). I should note that even when it works (starting with display connected), Displays still says the monitor is "unknown" (but it sends the signal). For the correct resolution to display, I have had to add a few xrandr lines for my monitor to my .xprofile file... otherwise resolution is limited to default 1024x768. So, resolution issues can be worked around, but the main issue is that the external doesn't get a signal without starting the machine with it connected. I have tried: adding i915.modeset=1 to grub (also i965.modeset=1 since someone posted that this helped even though lshw shows i915) adding following ppa and doing a dist-upgrade: sudo add-apt-repository ppa:xorg-edgers/ppa Here are the details: Laptop: Toshiba Tecra M10 lspci listings for video: 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) sudo lshw -C video listing: *-display:0 description: VGA compatible controller product: Mobile 4 Series Chipset Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 07 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:46 memory:ff400000-ff7fffff memory:e0000000-efffffff ioport:cff8(size=8) *-display:1 UNCLAIMED description: Display controller product: Mobile 4 Series Chipset Integrated Graphics Controller vendor: Intel Corporation physical id: 2.1 bus info: pci@0000:00:02.1 version: 07 width: 64 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: latency=0 resources: memory:ffc00000-ffcfffff "System Info" shows my graphics as the following Mobile Intel® GM45 Express Chipset x86/MMX/SSE2

  Read the article

• Ubuntu 12.04 stopped recognizing my BenQ monitor and reduced resolution to 1024x768

  - by Omri

  A few days ago I installed Ubuntu 12.04 32bit Desktop. It recognized my hardware without a problem (at least that I know of) and all worked fine. I left my system running (it is at work) through the night because it is also working as a database server and when I came today to work the resolution was 1024x768 (the monitor recommends 1920x1080) even though in the Display section of the System Settings it was recognized as BenQ, and no higher resolution was offered. After a restart, the monitor name changed from BenQ to Unknown. This is a desktop computer. I also installed gtk-redshift and f.lux. I checked Additional Drivers to see if there is something I can install but it didn't find anything. I tried to Google it but I didn't find anything about a monitor stopping being recognized after it was already working. I did enable some PPAs yesterday, namely webupd8, mozillateam/thunderbird-stable and some other, and I also followed the instructions to patch the NotifyOSD to be more friendly: sudo add-apt-repository ppa:caffeine-developers/ppa sudo add-apt-repository ppa:leolik/leolik sudo apt-get update sudo apt-get upgrade sudo apt-get install libnotify-bin pkill notify-osd sudo add-apt-repository ppa:nilarimogard/webupd8 sudo apt-get update sudo apt-get install notifyosdconfig I now purged both caffeine-developers and leolik PPAs in the hope it will help, but no change. Has there been a change in the packages that could introduce this problem? Any help will be very appreciated :-) Omri

  Read the article

• No monitor output after fresh install of 11.10 64-bit

  - by James

  I have a machine with a Nvidia 8600GT graphics card and a CRT monitor. Previously, I have only used Windows on it, and the graphics card seems to be working correctly in Windows 7. I booted up and installed Ubuntu 11.10 amd64 from the LiveCD and the whole process worked perfectly. When I tried to boot off the hard disk for the first time, the output to the monitor switched off during the splash screen, and this happens consistently. I can ctrl-alt-f2, so I tried an apt-get upgrade, which didn't help; nor did apt-get install nvidia-current. There is nothing that looks relevant in dmesg. Booting with the nomodeset option has no effect. Following the answers in this similar thread, I tried apt-get purge nvidia-173. Both startx and service lightdm start just say the service is already running. Does anyone know how to find out what the problem is? I was wondering if it is just that Ubuntu is trying to use a resolution that the monitor doesn't support, but I can't find out how to change that from the command line.

  Read the article

• Dell M4600 with nVidia Quadro 2000M hangs on boot when external monitor is connected

  - by vladeta

  I have a problem with my fresh installed Ubuntu 12.04 LTS on my Dell M4600: nVidia quadro 2000M i7-2860 16GB ram 128GB SSD Dell/Samsung 750GB HDD IPS RGB laptop display When it is connected via DP++ to the external Dell U2311H monitor, it hangs on boot or when wakening from suspend. If I detach the DP cable it boots normally. I have tried all combinations that I have found, as adding to grub: "no splash", "boot=pci", "acpi=off", etc... I have also changed in nVidia X settings that external monitor is the primary one and also tried to delete monitor.xml file. There is no change it hangs each time after grub. It starts to load daemons then both screens are blank and then completely hangs with beep sound. What I discovered is if I detach the cable and wait for about 2 sec after grub starts booting and then physically connect DP cable while the Ubuntu is still booting everything works normally and I have a picture on my external screen while the laptop screen is off, just as I wanted. Do you maybe know how to solve this issue? Thank You.

  Read the article

• ubuntu 12.04 LTS hangs on boot when external monitor is connected

  - by vladeta

  I have a problem with my fresh installed Ubuntu 12.04 LTS on my Dell M4600: nVidia quadro 2000M i7-2860 16GB ram 128GB SSD Dell/Samsung 750GB HDD IPS RGB laptop display When it is connected via DP++ to the external Dell U2311H monitor, it hangs on boot or when wakening from suspend. If I detach the DP cable it boots normally. I have tried all combinations that I have found, as adding to grub: "no splash", "boot=pci", "acpi=off", etc... I have also changed in nVidia X settings that external monitor is the primary one and also tried to delete monitor.xml file. There is no change it hangs each time after grub. It starts to load daemons then both screens are blank and then completely hangs with beep sound. What I discovered is if I detach the cable and wait for about 2 sec after grub starts booting and then physically connect DP cable while the Ubuntu is still booting everything works normally and I have a picture on my external screen while the laptop screen is off, just as I wanted. Do you maybe know how to solve this issue? Thank You.

  Read the article

• Windows expand over 2 monitors in quad-monitor setup

  - by Martin

  i just installed ubuntu 11.10 with my previous hardware setup: 4 monitors and 2 identical nvidia graphic cards. draging windows around all 4 monitors works nice, but when i maximize a window it expand always over 2 screens. (2x twinview). i had an workaround for this in 11.04 but cant remember what it was... may one of you guys have quad monitors up and running with window maximizing on only one screen my xorg.conf looks like this: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 280.13 (buildd@allspice) Thu Aug 11 20:54:45 UTC 2011 # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 280.13 ([email protected]) Wed Jul 27 17:15:58 PDT 2011 Section "ServerLayout" # Removed Option "Xinerama" "1" # Removed Option "Xinerama" "0" Identifier "Layout0" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" 0 1080 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "1" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Samsung SMB2220N" HorizSync 31.0 - 80.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" Identifier "Monitor1" VendorName "Unknown" ModelName "Samsung SMB2220N" HorizSync 31.0 - 80.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 550 Ti" BusID "PCI:2:0:0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 550 Ti" BusID "PCI:3:0:0" EndSection Section "Screen" # Removed Option "TwinView" "True" # Removed Option "MetaModes" "nvidia-auto-select, nvidia-auto-select" # Removed Option "metamodes" "CRT-0: nvidia-auto-select 1920x1080 +0+0, CRT-1: nvidia-auto-select 1920x1080 +1920+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "CRT-0" Option "metamodes" "CRT-0: nvidia-auto-select +0+0, CRT-1: nvidia-auto-select +1920+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" # Removed Option "TwinView" "True" # Removed Option "MetaModes" "nvidia-auto-select, nvidia-auto-select" # Removed Option "metamodes" "CRT-0: nvidia-auto-select 1920x1080 +0+0, CRT-1: nvidia-auto-select 1920x1080 +1920+0" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "CRT-0" Option "metamodes" "CRT-0: nvidia-auto-select +0+0, CRT-1: nvidia-auto-select +1920+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Extensions" Option "Composite" "Disable" EndSection

  Read the article

• How to run installation CD for second monitor?

  - by dobsoft

  I am running ubuntu 14 off of a live USB. I have a second monitor that I would like to use while using ubuntu. It has an installation cd that you have to install before using, and when I click on the .exe file the Archive Manager tries to open it and says an error occurred while loading the archive. Thanks for the help. Edit: additional information It just doesn't show up when when I'm in the display settings area. I press the locate(name is probably something else) monitor button too. I know it needs the CD because when I was using it with Windows it didn't work until I went through the installation process on the CD. If ubuntu doesn't use .exe files is there a way to use the CD still? Monitor info from label: -acer LCD monitor -model number: S200HQL Version: S200HQL bd I connect it to my computer using a VGA cord which is connected to a j5create VGA to USB adapter. Not sure if this helps: VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09) lsusb output: Bus 002 Device 004: ID 046d:c52f Logitech, Inc. Unifying Receiver Bus 002 Device 005: ID 0bc2:2100 Seagate RSS LLC Bus 002 Device 007: ID 0711:5200 Magic Control Technology Corp. Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 1bcf:2c18 Sunplus Innovation Technology Inc. Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

  Read the article

• HDMI video output not working for external monitor

  - by user291852

  I have installed from scratch ubuntu GNOME 14.04 with gnome-flashback on my old HP HDX 16 laptop (core 2 duo p8600 + nvidia GT9600M + 4GB of ram) and I have problems with the HDMI output (I use it to extend my desktop on a dell U2412M 1920x1200 monitor). In the following I summarize the configurations that I have tried: Using the open source nouveau drivers, only the laptop monitor works, no signal from the external monitor connected to the HDMI output. However, the output of the xrandr command show that the HDMI output is connected with the correct resolution 1920x1200 (I find this thing really weird). Nouveau drivers with VGA connection works without problems on the external monitor, but the image is blurry compared to the HDMI connection. Using the nvidia drivers (I have tried different versions: nvidia-331-updates and the xorg-edgers versions nvidia-334 and nvidia-337) the HDMI output works, but I have system instabilities, random crashes and display freezes. I can't even enter in terminal mode with ctrl-alt-f1, so I have to manually shut down the laptop with the power button. I really would like to use the HDMI output with the nouveau drivers to avoid the system instabilities that I experienced with the nvidia drivers, but I can't figure out how to make it works. Alessandro

  Read the article

• Nvidia dual monitor configuration gets lost every time I reboot

  - by sunwukung

  I've recently updated (well, borked then completely reinstalled) to 12.04. I'm running a dual monitor setup, with a Dell U2410 / Dell 2007WFP combination on an HP Elite Book 8560W. The graphics card is an NVIDIA GF108 [Quadro 1000M]. My problem is as follows. I can get the dual monitor setup working fine, but every time I reboot, my machine appears to lose the settings (specifically, the U2410 is disabled, the mouse pointer is locked in the launcher). I have to restate the settings after every launch. I've tried running nvidia-settings as sudo, I've save the changes to my xorg.conf file (see below) but nothing seems to be sticking. Has anyone had similair issues, or know of a fix? Conf file follows: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 295.33 (buildd@allspice) Fri Mar 30 15:25:24 UTC 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "DELL 2007WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 76.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro 1000M" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "DFP-1" Option "metamodes" "CRT: 1680x1050 +1920+0, DFP-1: 1920x1200 +0+0; CRT: nvidia-auto-select +0+0, DFP-1: NULL" SubSection "Display" Depth 24 EndSubSection EndSection The error message I'm getting is this: none of the selected modes were compatible with the possible modes: Trying modes for CRTC 642: CRTC 642: trying mode 3600x1080@50hz with output at 1280 x 1024@0Hz (pass 0) CRTC 642: trying mode 3600x1080@50hz with output at 1280 x 1024@0Hz (pass 0) CRTC 642: trying mode 3600x1080@50hz with output at 1280 x 1024@0Hz (pass 0) CRTC 642: trying mode 3600x1080@50hz with output at 1280 x 1024@0Hz (pass 1) CRTC 642: trying mode 3600x1080@50hz with output at 1280 x 1024@0Hz (pass 1) CRTC 642: trying mode 3600x1080@50hz with output at 1280 x 1024@0Hz (pass 1)

  Read the article

• Dual monitor display 12.04?

  - by MrMonty

  I have 2 beautiful 27" asus monitors. I started trying out Ubuntu 12.04 and now only one works and thats vga .. Any help here cause I'm stumped. I have a bfg tech nivida Geforce 8800 gt 512mb and I'm trying to fix this. Getting this error Wen i try to configure the xorg file Failed to set MetaMode (1) 'DFP-0: 1280x1024 @1280x1024 +0+0, DFP-1: 1280x1024 @1280x1024 +1280+0' (Mode 2560x1024, id: 50) on X screen 0. ........................................................................................... This is the xorg.conf ....................................................... nvidia-settings: X configuration file generated by nvidia-settings nvidia-settings: version 295.33 (buildd@allspice) Fri Mar 30 15:25:24 UTC 2012 Section "ServerLayout" Removed Option "Xinerama" "1" Removed Option "Xinerama" "0" Removed Option "Xinerama" "1" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputClass" Identifier "Mouse Remap" MatchProduct "Saitek Cyborg R.A.T.7 Mouse" MatchDevicePath "/dev/input/event*" Option "ButtonMapping" "1 2 3 4 5 6 7 8 9 0 0 0 0 0 0" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor1" VendorName "Unknown" ModelName "Ancor Communications Inc VE247" HorizSync 30.0 - 83.0 VertRefresh 50.0 - 76.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "Ancor Communications Inc VE247" HorizSync 30.0 - 83.0 VertRefresh 50.0 - 76.0 Option "DPMS" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro FX 1500" BusID "PCI:1:0:0" Screen 1 EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro FX 1500" EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "TwinViewXineramaInfoOrder" "DFP-1" Option "metamodes" "DFP-1: 1280x1024 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Removed Option "TwinView" "0" Removed Option "metamodes" "DFP-0: 1280x1024 +0+0" Removed Option "TwinView" "1" Removed Option "metamodes" "DFP-0: 1280x1024 +0+0, DFP-1: 1280x1024 +1280+0" Removed Option "TwinView" "0" Removed Option "metamodes" "DFP-0: 1280x1024 +0+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "DFP-0" Option "metamodes" "DFP-0: 1280x1024 +0+0, DFP-1: 1280x1024 +1280+0; DFP-1: 1280x1024_60 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Extensions" Option "Composite" "Disable" EndSection FILE ^^^^

  Read the article

• Problem with dual monitor

  - by Gernot

  I have a laptop with a nvidia optimus graka. I'm also useing a 23" external monitor. It never really worked... . After installation (it was a clean installation) the 23" monitor worked as it should, but the LCD from the laptop wasn't at the right resolution. And every time i tried to change this the PC crashed. Today i had a litle bit of time so i decided to solve this problem. I've tried a few things ( e.g. I've installed bumblebee with the nvidia driver and tested it. It's working...) but nothing solved my problem. Instead of getting any closer to the solution, it's gotten even more strange now... . Now, the display setting isn't recognizing a 2nd monitor at all. But I get on the 23" monitor (which is not shown in the display setting) a screen with the same resolution as the one on the laptop. The display settings looks so: Any help would be wonderful.

  Read the article

• Can't Move Windows to 2nd Monitor without Left Mouse and Cntl Key

  - by John C

  I have 2 very frustrating problems that maybe someone can help me with: I have 2 monitors (different sizes and resolutions) setup with the "Extended" monitor Win7 setup. My problem is this = I can not "move" a window from my Primary Monitor (larger and higher resolution on right side in front of me) to my Secondary 2nd monitor (smaller and lower resolution) with just selecting the title bar with the left mouse button and dragging it to the left. Windows 7 "snaps" it back to the left Primary Monitor when the window is physically in the 2nd window area as I'm holding the left mouse button. I can prevent this problem - by holding down the Cntl Key with the Left Mouse button, but this is extremely annoying to me. Also I typically "lose" focus if I try typing input on the 2nd monitor. Typing is erratic with regard to keystroke accuracy from my keyboard translated into input on the 2nd screen. No problem with typing input on the primary left monitor. I find this extremely annoying in Windows 7 and turning off the "snap" feature via the Control panel does NOT work for me. Win7 stubbornly refuses to move my selected window to my 2nd monitor without me "forcing" Win7 to do this with the Cntrl Key. Please tell me this is not a Win7 feature. Also on my system - Windows Key + Shift, Left arrow Key (pressed together) or the same combo with The Right arrow Key - don't do anything whatsoever. Widows Key with "+" however does maximize current window across both monitors, and I can "restore" it with Windows Key and "-" back to original monitor and size. I have tried various solutions including changing the resolutions of one or both of my monitors and sometimes "temporarily helps" but reverts back to the problem. Also if I swap the logical (not physical) layout so that I tell Win7 the monitors are setup in a reserved situation (Large monitor on the left, and small on the right) - this also sometimes helps for awhile - and is very strange and awkward to work with "backwards". But all of these solutions stop working. The only solution that consistently works for "moving" the screens is to hold the Cntrl Key down as I'm moving window with the left mouse selected on the title bar. Even that however, doesn't prevent the loss of typing focus for me on the 2nd monitor - while at the same time the typing on the 1st monitor is fine. Any help on moving my window screens from one monitor on my 2nd monitor without having to press the Cntrl key while holding down my left mouse button with be appreciated. Also any help on gaining typing "focus" into my 2nd screen with be helpful too. Thanks - John

  Read the article

• Maximized Office 2007 gets cut off on multi-monitor setup with different resolutions

  - by Adam M-W

  I've got an external monitor plugged into my laptop that I like to use for typing up documents, but I've noticed that when Word is maximized it gets cut off at where the primary monitor's bounds are. Is this a bug in Wine (i'm using version 1.3.32), or with my Window Manager (metacity with compositing enabled, version 2.34.1), with my graphics drivers (nouveau) or something else? I know that I can fix it by unmaximizing (it doesn't get cut off and I can resize to the entirety of the second monitor), but it keeps on maximizing itself as it (rightly so) knows that it should be taking up the entire screen. I don't really want to use the "Emulate a virtual desktop feature", I would prefer to find the source of this issue.

  Read the article

• Unity displays a black screen when connecting an external monitor

  - by Bragboy

  I upgraded my ubuntu from 10.10 to 11.04 and since that day I have been facing issues with Dual Monitor in Ubuntu. When I connect my second monitor during boot time, everything works fine. But when I use my laptop and try to connect a monitor when I am running Ubuntu, I face a weird black screen issue. To see what I mean, following is a screenshot of the same. Here are the problems that happen Desktop background goes away As you can see on the left hand side of the desktop, the right and top portions are black The usual buttons - power button, mail, volumne etc., on the top panel do not work as expected Plus it suddenly crashses at times. And a lot of n other issues associated with this. Is there any patch/release that has happened for these bugs or should I report it anywhere? Help needed.

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >