Search Results

Search found 304 results on 13 pages for 'pascal schuster'.

Page 5/13 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Manually start scheduled launchd job

  - by Pascal

  On our Mac OS X (10.6) Server we have setup several backup scripts that are controlled by launchd and launched at specific times. For this we have defined StartCalendarInterval and this all works very well. Now it happens that I would like to start one of these jobs out of schedule, but this does not start the job (but also does not give an error/warning): sudo launchctl start org.job-label The manpage of launchtl states that start is intended to test on-demand jobs, no word of scheduled jobs. Is there a way to kickstart scheduled jobs?

  Read the article

• Is there a fix to display 0 when arithmetic underflow occurs on the Windows 7 calculator?

  - by Pascal Qyy

  I have a problem that exasperates me: When I take the Windows 7 calculator in standard mode, if I do 4, then v (square root), the result is 2 Fine. But, at this point, if I do - (minus), then 2, the result is -1,068281969439142e-19 instead of 0! OK, I know about ? (machine epsilon), and yes, -1,068281969439142e-19 is less than the 64 bits ? (1.11e-16), so, we have an arithmetic underflow, in other words in this case: 0. Great, my computer is able to represent subnormal numbers instead of just flush to zero when this happens, and it seems that it is an improvement! Subnormal values fill the underflow gap with values where the absolute distance between them are the same as for adjacent values just outside of the underflow gap. This is an improvement over the older practice to just have zero in the underflow gap, and where underflowing results were replaced by zero (flush to zero). BUT: this result is false! when you try to explain the concept of the square root to a child and you end up with this kind of result, it only complicates your task... what is the point to represent subnormal numbers in a standard, non scientific calculator? So, is there a way to fix this?

  Read the article

• Obey server_name in Nginx

  - by pascal

  I want nginx/0.7.6 (on debian, i.e. with config files in /etc/nginx/sites-enabled/) to serve a site on exactly one subdomain (indicated by the Host header) and nothing on all others. But it staunchly ignores my server_name settings?! In sites-enabled/sub.domain: server { listen 80; server_name sub.domain; location / { … } } Adding a sites-enabled/00-default with server { listen 80; return 444; } Does nothing (I guess it just matches requests with no Host?) server { listen 80; server_name *.domain; return 444; } Does prevent Host: domain requests from giving results for Host: sub.domain, but still treats Host: arbitrary as Host: sub-domain. The, to my eyes, obvious solution isn't accepted: server { listen 80; server_name *; return 444; } Neither is server { listen 80 default_server; return 444; } Since order seems to be important: renaming 00-default to zz-default, which, if sorted, places it last, doesn't change anything. But debian's main config just includes *, so I guess they could be included in some arbitrary file-system defined order? This returns no content when Host: is not sub.domain as expected, but still returns the content when Host is completely missing. I thought the first block should handle exactly that case!? Is it because it's the first block? server { listen 80; return 444; } server { listen 80; server_name ~^.*$; return 444; }

  Read the article

• Can I have damaged a CPU ?

  - by Pascal

  Hey guys, This is a question I asked on Anantech forums, but I just discovered this community and think this question would fit right in. Here goes: I built a PC around a Q9550 1 1/2 years ago (MoBo is an Asus P5Q deluxe). Specs give 2.83GHz, OC'ed it to 3.40 GHZ without any problem (or so I thought) till 2 months ago. Cooling is provided by stock Intel Fan... 2 Months ago, I began to see random crashes, bios saying CPU overheat error... PC would reboot at OC'ed speed without any problem. Since last saturday and a few more crashes, PC won't reboot at 3.40 GHz, and even at stock speed (2.83 GHz), I got core temperatures of (60 C idle, 95 C under load) on the first two cores. This is the 4 core temperatures I am talking about, not the T-CPU which obvioulsy is lower. Fan is running at a steady 2000 RPM. Questions for you : 1. Is 2000 RPM the normal speed of the Intel fan or is my fan somehow broken (which could explain the overheating). In this case, any recommendation for a good fan for OCing ? 2. Hypothesis I fear is the right one: can the CPU have been slowly damaged over time by this OCing, meaning there is nothing much to do except waiting for it to die ? (As a side note, I am surprised that the 9550 is still around 300 $CDN here... Thought it would have been cheaper with all those i3/i5/i7 around). Any help or advice would be more than welcome...

  Read the article

• Torrent, ISA Server 2006 and packet dropped due to TCP_NOT_SYNC

  - by Pascal

  Hi, I'm trying to get uTorrent 2.0.4 to work in a DMZ machine, protected by a ISA Server 2006. I've opened 1 inbound port (via publishing) and opened all the higher ports for that specific machine that runs uTorrent on my DMZ, and it's working almost fine. The problem is that I keep getting packets dropped with 0xc0040017 FWX_E_TCP_NOT_SYN_PACKET_DROPPED. Is there any way to disable this via registry? Is there any way around this? The download speed fluctuates a lot, and when I starts hitting the upper limit that I've defined in uTorrent, the errors start poping up a lot, and the download speed goes way down, and the process repeats on and on Tks Edit My outbound rules are: Port Range: TCP 10000-65535 Outbound Port Range: UDP 10000-65535 Send Edit It's probably a bug handling requests from Windows 7. When I installed the uTorrent on a XP machine, the problem went away

  Read the article

• User-trainable spam filtering with Exim and Dovecot

  - by pascal

  Currently I'm using Exim to deliver mails via dovecot-lda into Dovecot mailboxes. I'd like to add spam filtering, but I don't want to reject false-positives in Exim, and I want to train the bayesian filter from the client. So: How do I configure a spamd such that spam lands in a Junk folder, and when the user finds spam in their Inbox, or ham in their Junk, they move it to the correct box which trains the spamd. I have found dovecot-antispam but I'm not sure about its quality, it only seems to support dspam (and crm114, which is dead, last release August 2009).

  Read the article

• How to configure Transparent IP Address Sharing (TAS) on a Mediatrix 4102 with DGW 2.0 firmware?

  - by Pascal Bourque

  I am making the switch to VoIP. I chose voip.ms as my service provider and Mediatrix 4102 as my ATA. One reason why I chose the Mediatrix over other popular consumer ATAs is that it's supposed to be easy to place it in front of the router, so it can give priority to its own upstream traffic over the home network's upstream traffic. This is supposed to work transparently, with the ATA and router sharing the same public IP address (the one obtained from the modem). They call this feaure Transparent IP Address Sharing, or TAS. Their promotional brochure describes it like this: The Mediatrix 4102 also uses its innovative TAS (Transparent IP Address Sharing) technology and an embedded PPPoE client to allow the PC (or router) connected to the second Ethernet port to have the same public IP address, eliminating the need for private IP addresses or address translations. I am interested by this feature because my router, an Apple Time Capsule, doesn't support QoS and cannot give priority to the voice packets if the ATA is behind the router. However, after hours of searching the web, reading the documentation, and good ol' trial and error, I haven't been able to configure the Mediatrix to run in this mode. Then I found a version of the manual that looks like it was for a previous version of the firmware (SIP), where there is an entire section dedicated to configuring TAS (starting at page 209). But my Mediatrix comes with the DGW 2.0 firmware, whose documentation does not mention TAS at all. So I tried to follow the TAS setup instructions from the SIP documentation and apply them to my DGW firmware, using the Variable Mapping Between SIP v5.0 and DGW v2.0 document as a reference, but no success. Some required SIP variables don't have an equivalent in DGW. So it looks like the DGW firmware does not support TAS at all, or if it does they are not doing anything to help us set it up. So right now, the Mediatrix is behind the router and VoIP works perfectly except when my upstream bandwidth is saturated. My questions are: Is downgrading to SIP firmware the only way to have my Mediatrix 4102 run in TAS mode? If not, anybody knows how to setup TAS on the DGW firmware? Is TAS mode the only way to give priority to the voice packets if I want to keep my current router (Apple Time Capsule)? Thanks!

  Read the article

• Network outside internal not reaching TMG Forefront 2010 (Hyper-V environment)

  - by Pascal

  Below is my environment: I have 1 physical machine running Windows 2008 R2, with the Hyper-V role. This machine has 3 physical NICs: One for Internet One for Internal Network One for Wireless Network All 3 have their respective Virtual Networks in Hyper-V, and I have an extra Private virutal machine network for a DMZ Network. In one of the virtual machines, I have TMG Forefront 2010 SP1 installed, with all 4 networks available to it. Below is the IPCONFIG /ALL at the firewall: Windows IP Configuration Host Name . . . . . . . . . . . . : FRW-EXP1-02 Primary Dns Suffix . . . . . . . : exp1.eti.br Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : Yes WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : exp1.eti.br Ethernet adapter Internet: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft Virtual Machine Bus Network Adapter #4 Physical Address. . . . . . . . . : 00-15-5D-01-06-0E DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::6d05:6033:4cfc:bdf5%15(Preferred) IPv4 Address. . . . . . . . . . . : 189.100.110.xxx(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.240.0 Lease Obtained. . . . . . . . . . : quarta-feira, 5 de janeiro de 2011 11:17:24 Lease Expires . . . . . . . . . . : quarta-feira, 5 de janeiro de 2011 16:07:02 Default Gateway . . . . . . . . . : 189.100.96.xxx DHCP Server . . . . . . . . . . . : 201.6.2.43 DHCPv6 IAID . . . . . . . . . . . : 436213085 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-14-6D-75-6F-00-15-5D-01-06-0B DNS Servers . . . . . . . . . . . : 201.6.2.163 201.6.2.43 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter Rede Interna: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft Virtual Machine Bus Network Adapter #3 Physical Address. . . . . . . . . : 00-15-5D-01-06-0C DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::51ff:4723:ce4c:bbc3%14(Preferred) IPv4 Address. . . . . . . . . . . : 10.50.75.10(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : DHCPv6 IAID . . . . . . . . . . . : 352327005 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-14-6D-75-6F-00-15-5D-01-06-0B DNS Servers . . . . . . . . . . . : 10.50.75.1 10.50.75.2 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter DMZ: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft Virtual Machine Bus Network Adapter #2 Physical Address. . . . . . . . . : 00-15-5D-01-06-0A DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::d4c5:75cf:e9aa:73e1%13(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.10.1(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : DHCPv6 IAID . . . . . . . . . . . : 301995357 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-14-6D-75-6F-00-15-5D-01-06-0B DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1 fec0:0:0:ffff::2%1 fec0:0:0:ffff::3%1 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter Wireless: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft Virtual Machine Bus Network Adapter Physical Address. . . . . . . . . : 00-15-5D-01-06-0B DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::459:8ca6:d02:8da1%11(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.1.10(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : DHCPv6 IAID . . . . . . . . . . . : 234886493 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-14-6D-75-6F-00-15-5D-01-06-0B DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1 fec0:0:0:ffff::2%1 fec0:0:0:ffff::3%1 NetBIOS over Tcpip. . . . . . . . : Enabled I have the Networks below at Forefront: External: IP addresses external to the Forefront TMG Networks Internal: 10.50.75.0 - 10.50.75.255 Local Host: Perimiter: 192.168.10.0 - 192.168.10.255 Wireless: 192.168.1.0 - 192.168.1.255 In the Networks Rules, I have: 1 => Route => Local Host => All Networks 2 => Route => Quarantined; VPN => Internal 3 => NAT => Internal; VPN => Perimiter 4 => NAT => Internal; Perimiter; Quarantined; VPN; Wireless => External My problem is that I can only communicate with the Internal and External networks. If a ping www.google.com or 10.50.75.21 from the Forefront VM, I get answer backs without a problem. If I try to ping a machine at the Perimiter network or the Wireless network, it doesn't get routed back to Forefront, and it's the default gateway on all Networks. Here as ping samples: PS C:\Users\Administrator.TPB1> ping www.google.com Pinging www.l.google.com [64.233.163.104] with 32 bytes of data: Reply from 64.233.163.104: bytes=32 time=11ms TTL=58 Reply from 64.233.163.104: bytes=32 time=8ms TTL=58 Ping statistics for 64.233.163.104: Packets: Sent = 2, Received = 2, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 8ms, Maximum = 11ms, Average = 9ms Control-C PS C:\Users\Administrator.TPB1> ping 10.50.75.21 Pinging 10.50.75.21 with 32 bytes of data: Reply from 10.50.75.21: bytes=32 time=1ms TTL=128 Reply from 10.50.75.21: bytes=32 time=1ms TTL=128 Reply from 10.50.75.21: bytes=32 time=1ms TTL=128 Reply from 10.50.75.21: bytes=32 time=1ms TTL=128 Ping statistics for 10.50.75.21: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 1ms, Maximum = 1ms, Average = 1ms PS C:\Users\Administrator.TPB1> ping 192.168.10.3 Pinging 192.168.10.3 with 32 bytes of data: Reply from 192.168.10.1: Destination host unreachable. Request timed out. Request timed out. Request timed out. Ping statistics for 192.168.10.3: Packets: Sent = 4, Received = 1, Lost = 3 (75% loss), PS C:\Users\Administrator.TPB1> The ping to the 192.168.10.3 gets the Destination host unreachable. Below is the ipconfig for the perimiter VM: PS C:\Users\Administrator.Administrator> ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : app-exp1-02 Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Unkown IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft Virtual Machine Bus Network Adapter Physical Address. . . . . . . . . : 00-15-5D-01-06-08 DHCP Enabled. . . . . . . . . . . : No IPv4 Address. . . . . . . . . . . : 192.168.10.3 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.10.1 DNS Servers . . . . . . . . . . . : 201.6.2.163 201.6.2.43 Trying to ping 192.168.10.1 ( the gateway ) from the DMZ machine also does not work. When I use Log & Reports to monitor packets from Wireless network and Perimiter network, I don't get any packets link PING or HTTP that I try to send. But I do get a lot of spoofing messages for NETBIOS broadcasts... it's like Forefront thinks it's coming from a different network, but I don't know why. Please Help! Tks

  Read the article

• How to configure Transparent IP Address Sharing (TAS) on a Mediatrix 4102 with DGW 2.0 firmware?

  - by Pascal Bourque

  I am making the switch to VoIP. I chose voip.ms as my service provider and Mediatrix 4102 as my ATA. One reason why I chose the Mediatrix over other popular consumer ATAs is that it's supposed to be easy to place it in front of the router, so it can give priority to its own upstream traffic over the home network's upstream traffic. This is supposed to work transparently, with the ATA and router sharing the same public IP address (the one obtained from the modem). They call this feaure Transparent IP Address Sharing, or TAS. Their promotional brochure describes it like this: The Mediatrix 4102 also uses its innovative TAS (Transparent IP Address Sharing) technology and an embedded PPPoE client to allow the PC (or router) connected to the second Ethernet port to have the same public IP address, eliminating the need for private IP addresses or address translations. I am interested by this feature because my router, an Apple Time Capsule, doesn't support QoS and cannot give priority to the voice packets if the ATA is behind the router. However, after hours of searching the web, reading the documentation, and good ol' trial and error, I haven't been able to configure the Mediatrix to run in this mode. Then I found a version of the manual that looks like it was for a previous version of the firmware (SIP), where there is an entire section dedicated to configuring TAS (starting at page 209). But my Mediatrix comes with the DGW 2.0 firmware, whose documentation does not mention TAS at all. So I tried to follow the TAS setup instructions from the SIP documentation and apply them to my DGW firmware, using the Variable Mapping Between SIP v5.0 and DGW v2.0 document as a reference, but no success. Some required SIP variables don't have an equivalent in DGW. So it looks like the DGW firmware does not support TAS at all, or if it does they are not doing anything to help us set it up. So right now, the Mediatrix is behind the router and VoIP works perfectly except when my upstream bandwidth is saturated. My questions are: Is downgrading to SIP firmware the only way to have my Mediatrix 4102 run in TAS mode? If not, anybody knows how to setup TAS on the DGW firmware? Is TAS mode the only way to give priority to the voice packets if I want to keep my current router (Apple Time Capsule)? Thanks!

  Read the article

• Debian Stable: Can't update kernel, libc won't update.

  - by pascal

  I use Debian Stable (squeeze) on a virtual host where I can't touch the kernel, it's stuck (and will be for some time as support told me) at Linux 2.6.18-028stab070.3 #1 SMP Wed Jul 21 18:33:27 MSD 2010 x86_64 So when I try to update, several packages fail with FATAL: kernel too old for example Preparing to replace libgcc1 1:4.6.0-11 (using .../libgcc1_1%3a4.6.1-1_amd64.deb) ... Unpacking replacement libgcc1 ... Setting up libgcc1 (1:4.6.1-1) ... FATAL: kernel too old Segmentation fault dpkg: error processing libgcc1 (--configure): subprocess installed post-installation script returned error exit status 139 and some version chaos ensued: The following packages have unmet dependencies: libc-dev-bin : Depends: libc6 (> 2.13) but 2.11.2-13 is installed libc6 : Depends: libc-bin (= 2.11.2-13) but 2.13-5 is installed libc6-dev : Depends: libc6 (= 2.13-5) but 2.11.2-13 is installed libquadmath0 : Depends: gcc-4.6-base (= 4.6.0-2) but 4.6.0-11 is installed libstdc++6 : Depends: gcc-4.6-base (= 4.6.0-2) but 4.6.0-11 is installed locales : Depends: glibc-2.13-1 What should I do? I want to keep the system up-to-date, so I want to pin as few packets as possible, but I also don't want to have to compile anything manually. Trying to pin the status quo and figured out where the error came from: ldconfig segfaults. -v doesn't print anything more so I can't tell what's the actual problem. # ldconfig FATAL: kernel too old

  Read the article

• Faking a Linux environment without chroot

  - by Pascal

  For a university project I want to test a C++11 program on a 32-core machine. Unfortunately the machine has Ubuntu 12.04 with GCC 4.6 installed (we need GCC 4.7 because of some C++11 threading features). In such an environment I would normally run a chroot with a custom linux (say a debootstrap with Ubuntu 12.10). Since we don't get root access on the machine we can't use chroot. So far I have prepared a run-time environment using debootstrap for our code, I compiled it in the debootstrap environemnt. Then copied it onto the server (using rsync). In order to run our C++ code I set the LD_LIBRARY_PATH to export LD_LIBRARY_PATH=~/debootstrap/usr/lib/:~/debootstrap/lib64/:~/debootstrap/usr/lib/x86_64-linux-gnu/:~/debootstrap/lib/x86_64-linux-gnu/:$LD_LIBRARY_PATH and so far our code seems to run. I'm however stuck with our python code. It doesn't seem to be sufficient to set the paths manually. export PYTHONPATH=~/debootstrap/usr/lib/python2.7/dist-packages:~/debootstrap/usr/lib/python2.7:~/debootstrap/usr/lib/python2.7/plat-linux2:~/debootstrap/usr/lib/python2.7/lib-tk:~/debootstrap/usr/lib/python2.7/lib-dynload:~/debootstrap/usr/local/lib/python2.7/dist-packages:~/debootstrap/usr/lib/pymodules/python2.7:~/debootstrap/usr/lib/python2.7/dist-packages/PIL:~/debootstrap/usr/lib/python2.7/dist-packages/gtk-2.0:~/debootstrap/usr/lib/python2.7 Executing our script results in ImportError: No module named _path Is there an easier way to accomplish a "fake"-chroot than just overriding and creating environment variables? Note I need python since we created a custom C++-Python module in order to run our tests. Maybe I should create two questions from this.

  Read the article

• How to reproduce the behavior of Mac OS X's dead keys on Windows 7?

  - by Pascal Qyy

  I'm French, but I've chosen to take a QWERTY keyboard for my MacBook Pro for many reasons: first of all, the AZERTY keyboard is not at all ergonomic because it has no numeric keypad, and I must use MAJ or CAPS LOCK to access to the numeric keys ; secondly, I've bought this mac for development ; and chars {, }, etc., are not directly accessible on the Apple AZERTY keyboard the last thing is that: the diacritics are VERY easy to produce on an Apple keyboard with Mac OS X : ? + c for a ç, for example, and many dead keys easy to use (e.g. ? + e, then e give you an é. So, I have no difficulties to write in my native language with this keyboard under Mac OS X. BUT, when I boot on Windows 7's Boot Camp partition, or when I use applications from it through VMware Unity, it is no longer the same comfort! Without numeric keypad, it's impossible to use it for produce specials characters (e.g.: Alt + 0231 for the ç) I've tried many solutions, like auto replacement in Microsoft Office (e.g.: ,,c being replaced by ç), but for all my diacritics, I must type a space, then a back space before the replacement work. I've also tried third party software, as Texter, but it is very buggy and don't work properly (or don't work at all) in many case! So, is there a solution somewhere, to have this Mac OS X's nice and comfortable way of producing diacritics for Windows 7? Thank in advance for your help and your time!

  Read the article

• Share the same subnet between Internal network and VPN Clients

  - by Pascal

  I would like to set up a configuration where VPN clients connecting to my Forefront TMG can access all the resources of my Internal network without having the to use the option "Use default gateway on remote network" on the VPN's TCP/IP Ipv4 Advanced Settings. This is important to me, since they can use their own internet while accessing my network through VPN (the security implications of this are acceptable on my cenario) My Internal network runs on 10.50.75.x, and I set up Forefront TMG to relay the DHCP of my Internal network to the VPN clients, so they get IPs from the same range as the Internal network. This setup initially works, and the VPN clients use their own internet, and can access anything that is on the internal network. However, after a while, HTTP Proxy Traffic from the Internal network starts getting routed to the IP of the RRAS Dial In Interface, instead of the IP of the Internal's network gateway. When this happens, the HTTP Proxy starts getting denied for obvious reasons. My first question is: does this happen because Forefront TMG wasn't designed to handle a cenario that I described above, and it "loses itself"? My second question is: Is there any way to solve this problem, either through configuration or firewall policies? My third question is: If there's no way that it can work with the cenario above, is there another cenario that will solve my problem, and do what I'd like it to do properly? Below are my network routes: 1 => Local Host Access => Route => Local Host => All Networks 2 => VPN Clients to Internal Network => Route => VPN Clients => Internal 3 => Internet Access => NAT => Internal, Perimeter, VPN Clients => External 4 => Internal to Perimeter => Route => Internal, VPN Clients => Perimeter Tks!

  Read the article

• Mac webcam photo application with access to camera settings (resolution, camera selection, color balance, focus)

  - by Pascal T.

  Does anyone know about a webcam photo application (ie an alternative to photo booth) with would allow to change the settings on the camera, such as : Select camera (I.e I want to use an external webcam) Change camera resolution (with photobooth change camera settings (I.e autofocus, aperture, color balance, etc..) I did a lot of research on the internet with no success. I am looking for a very simple app (such as wmcap.exe on Windows) What I tried so far: photo booth: it works with an external camera, however there is no way to change the resolution, or the color/focus settings manycam : a virtual webcam driver. you can add special effects to your camera and transfer those effects to any app, but not change your camera settings... iGlasses : enables you to change the camera settings inside photo booth and other apps. However you cannot control the focus, nor the video resolution macam (did not work on my Mac book Pro) Does anyone know better than me? Note : my only solution now is to launch a virtual machine (with parallels desktop) and take the pictures from there!

  Read the article

• Why is my server performance degrading to the point of stopping, periodically?

  - by Pascal Aschwanden

  So, once in a while, I see in firebug that a request takes over 15 or even 60 seconds to respond and sometimes never. Here is what I've ruled out: It's not the CPU, cuz every time I check the Server load its less then 6 for all 3 numbers It's not the memory, because thats fairly low too, less the 50% It's not the I/O anymore, because I've seen the graphs that Joyent sent back to me when I requested them, and they show less then 3MB of I/O (mostly all read). It's not the SQL performance - I've profiled every last SQL command that runs, and they're all (99.9% of them anyway) running in less then 30ms, most run in less then 5ms. Oh and I've been profiling all the script execution times, and even the when the problem occurs, the script always manages to finish in 50ms or less (that's 1 / 20th of a second ). Now, I do run alot of ajax calls. 1 every 2 seconds per user and I have 300 DAU+. But, even if all 300 are playing simultaneously, thats still only 150 calls per second max. The only other thing I can think of is that one of my neighbors is funky. The problem is highly intermittent. 99% of the time it works perfectly and there's excellent performance. but 99%+ is not good enough. Eventually the performance gets so bad I have to restart the server, at which point everything is fine again. I've done this about 4 times now. Any ideas? Note: this is on joyent, vps, intro package 256mb of ram with bursting. here are the mysql dump info: Traffic ø per hour Received 18 MiB 29 MiB Sent 134 MiB 221 MiB Total 151 MiB 251 MiB Connections ø per hour % max. concurrent connections 5 --- --- Failed attempts 0 0.00 0.00% Aborted 0 0.00 0.00% Total 9,418 15.59 k 100.00%

  Read the article

• Need Assistance on ASUS K55V USB ports not working

  - by Pascal Schilling

  I have a K55V ASUS laptop, W7 Home (64bit). Whenever I try to use a mouse (or any other USB device), it doesn't work because of a driver problem. The automatic update tries to update the driver and requires me to reboot directly after. It doesn't work. Windows update then wants to re-attempt the update and then I have to reboot (etc). Now, after 10 tries it still doesn't work. Can some one help me out on this? No USB ports work at the moment, it has 2 USB 3.0 ports and 1 USB 2.0 port.

  Read the article

• What's the best way to install mod-wsgi for a specific version of python (2.7) on Debian (squeeze)?

  - by Pascal Polleunus

  System info: Debian Squeeze Python versions: 2.6.6 (default) & 2.7.2 mod-wsgi: 3.3-2 in /usr/lib/apache2/modules: mod_wsgi.so -> mod_wsgi.so-2.6 mod_wsgi.so-2.5 mod_wsgi.so-2.6 I've a virtualenv configured with Python 2.7 but my application runs 2.6.6, apparently because mod-wsgi is using the default version of the system. The way to go seems to configure mod-wsgi to use 2.7 (i.e. system-wide, not specific to a virtualenv). How can I install mod_wsgi.so-2.7? After installing that, I'll just have to change the symlink mod_wsgi.so to mod_wsgi.so-2.7.

  Read the article

• What is the --daemon option?

  - by Pascal Dimassimo

  I was installing Solr with Jetty using these instructions. Basically, those instructions made you download the Jetty startup script and copy it to /etc/init.d/jetty. But it was not working. Each time I was starting Jetty, I had a "FAILED" message and nothing to understand why it was happening. I decided to open up the /etc/init.d/jetty script to understand what was happening. I saw that this script was using start-stop-daemon to launch jetty. After a couple of time of debugging, I discovered that removing the --daemon option at the end of the start-stop-daemon call was fixing my problem. I did a couple of research and discovered that this guy had the same problem and resolved it like I did: my removing the --daemon option. What is weird is that the switch does not seem to be specific to start-stop-daemon, because it is not documented in the man page. Also, I've seen it used for other commands. So what is that --daemon option doing? And why removing it resolved my problem? Note that I am working on Ubuntu 10.04.2 LTS.

  Read the article

• SSL and regular VHost on the same server [duplicate]

  - by Pascal Boutin

  This question already has an answer here: How to stop HTTPS requests for non-ssl-enabled virtual hosts from going to the first ssl-enabled virtualhost (Apache-SNI) 1 answer I have a server running Apache 2.4 on which run several virtual hosts. The problem I noticed is that if I try to access let's say https://example.com that have no SSL setuped, apache will automatically try to access the first VHost that has SSL activated (which is litteraly not the same site). How can we prevent this strange behaviour, or in other words, how to say to Apache to ignore SSL for a given site. Here's sample of what my .conf files look like : <VirtualHost foobar.com:80> DocumentRoot /somepath/foobar.com <Directory /somepath/foobar.com> Options -Indexes Require all granted DirectoryIndex index.php AllowOverride All </Directory> ServerName foobar.com ServerAlias www.foobar.com </VirtualHost> <VirtualHost test.example.com:443> DocumentRoot /somepath/ <Directory /somepath/> Options -Indexes Require all granted AllowOverride All </Directory> ServerName test.example.com SSLEngine on SSLCertificateFile [­...] SSLCertificateKeyFile [­...] SSLCertificateChainFile [­...] </VirtualHost> With this, if I try to access https://foobar.com chrome will show me a SSL error that mention that the server was identifying itself as test.example.org Thanks in advance !

  Read the article

• MVC2: Validate PartialView before Form Submit of Page containing Partial View

  - by Pascal

  I am using asp.net mvc2 and having a basic Page that includes a Partial View within a form <% using (Html.BeginForm()) { %> <% Html.RenderAction("partialViewActionName", "Controllername"); %> <input type="submit" value="Weiter" /> <% } %> When I submit the form, the httpPost Action of my Page is called, and AFTER that the httpPost Action of my Partial View is called [HttpPost] public virtual ActionResult PagePostMethod(myModel model) { // here I should know about the validation of my partial View // If partialView.ModelState is valid then // return View("success"); // else return View(model) } [HttpPost] public virtual ActionResult partialViewActionName(myModel model) { ModelState.AddModelError("Error"); return View(model); } But as I am doing the Validation in the httpPost Method of my Partial View (because I want to use my Partial View in several Places) I cant decide if my hole page is valid or not. Has anyone an Idea how I could do this? Isn´t it a common task to have several partial Views in a page but have the information about validation in the page action methods? Thanks very much for your help!!

  Read the article

• DBExpress connecting SQL 2008 at runtime with Delphi 2009

  - by Pascal

  Hi, I'm trying to connect at runtime with SQL Server 2008 with Delphi 2009 using DBExpress, it it's not working. When I set all the properties at design time, it works great, but at RunTime, I'm getting "unknown driver: mssql". Below is the code: scnConexao := TSQLConnection.Create(nil); scnConexao.DriverName := 'MSSQL'; scnConexao.ConnectionName := 'MSSQLConnection'; scnConexao.GetDriverFunc := 'getSQLDriverMSSQL'; scnConexao.LibraryName := 'dbxmss.dll'; scnConexao.VendorLib := 'oledb'; scnConexao.LoginPrompt := False; scnConexao.Params.Add('SchemaOverride=sa.dbo'); scnConexao.Params.Add('HostName=DESKTOP'); scnConexao.Params.Add('DataBase=DBNAME'); scnConexao.Params.Add('OS Authentication=False'); scnConexao.Params.Add('User_Name=UserName'); scnConexao.Params.Add('Password=Password'); scnConexao.Params.Add('MSSQL TransIsolation=ReadCommited'); scnConexao.Open; I have included the dbxmss.dll in the same directory as my app, but to no avail. Any help would be greatly appreciated. Tks

  Read the article

• CGContextSetShadow() - shadow direction reversed between iOS 3.0 and 4.0?

  - by Pascal

  I've been using CGContextSetShadowWithColor() in my Quartz drawing code on the iPhone to generate the "stomped in" look for text and other things (in drawRect: and drawLayer:inContext:). Worked perfectly, but when running the exact same code against iOS 3.2 and now iOS 4.0 I noticed that the shadows are all in the opposite direction. E.g. in the following code I set a black shadow to be 1 pixel above the text, which gave it a "pressed in" look, and now this shadow is 1px below the text, giving it a standard shadow. ... CGContextSetShadowWithColor(context, CGSizeMake(0.f, 1.f), 0.5f, shadowColor); CGContextShowGlyphsAtPoint(context, origin.x, origin.y, glyphs, length); ... Now I don't know whether I am (or have been) doing something wrong or whether there has been a change to the handling of this setting. I haven't applied any transformation that would explain this to me, at least not knowingly. I've flipped the text matrix in one instance, but not in others and this behavior is consistent. Plus I wasn't able to find anything about this in the SDK Release Notes, so it looks like it's probably me. What might be the issue?

  Read the article

• Custom Keyboard (iPhone), UIKeyboardDidShowNotification and UITableViewController

  - by Pascal

  On an iPhone App, I've got a custom keyboard which works like the standard keyboard; it appears if a custom textfield becomes first responder and hides if the field resigns first responder. I'm also posting the Generic UIKeyboardWillShowNotification, UIKeyboardDidShowNotification and their hiding counterparts, like follows: NSMutableDictionary *userInfo = [NSMutableDictionary dictionaryWithCapacity:5]; [userInfo setObject:[NSValue valueWithCGPoint:self.center] forKey:UIKeyboardCenterBeginUserInfoKey]; [userInfo setObject:[NSValue valueWithCGPoint:shownCenter] forKey:UIKeyboardCenterEndUserInfoKey]; [userInfo setObject:[NSValue valueWithCGRect:self.bounds] forKey:UIKeyboardBoundsUserInfoKey]; [userInfo setObject:[NSNumber numberWithInt:UIViewAnimationCurveEaseOut] forKey:UIKeyboardAnimationCurveUserInfoKey]; [userInfo setObject:[NSNumber numberWithDouble:thisAnimDuration] forKey:UIKeyboardAnimationDurationUserInfoKey]; [[NSNotificationCenter defaultCenter] postNotificationName:UIKeyboardWillShowNotification object:nil userInfo:userInfo]; This code is working and I use it in UIViewController subclasses. Now since iPhone OS 3.0, UITableViewController automatically resizes its tableView when the system keyboards show and hide. I'm only now compiling against 3.0 and I thought that the controller should also resize the table if my custom keyboard appears, since I'm posting the same notification. However it doesn't. The table view controller is set as the delegate of the input fields. Does anyone have an idea why this might be the case? Has anyone implemented something similar successfully? I have standard input fields along the custom ones, so if the user changes the fields the standard keyboard hides and the custom one shows. It would be beneficial if the tableView didn't resize to full height and I didn't have to resize it back with a custom method.

  Read the article

• How to install the GlassFish v3 server adapter with Eclipse 3.6M6 (Helios)

  - by Pascal Thivent

  When I try to install the GlassFish v3 server adapter via the New Server Wizard, Eclipse 3.6M6 seems to contact remote sites but fail at showing any adapter: Is there another way to install the GlassFish plugin?

  Read the article

• when long polling, Why are my other requests taking so long?

  - by Pascal

  The client makes 2 concurrent requests. (1 which takes 60 seconds - long polling) and another which is NOT long polling - supposed to return right away. It does return right away when I'm not doing long polling. But as soon as I start doing long polling with the other thread, the other one takes forever to execute. Firebug shows that the request is waiting for 10-50 seconds. On the server, I profiled ALL requests from the moment the php script starts to the time it goes back to the client, and it shows that each one only took 300ms or less. This problem started about the same time I started doing long polling (with the other XHR requests). I'm using jquery for both requests. The server shows that it is under very light load. CPU and memory less then 2%. 8 processes running out of a pool of 15. (it doesn't seem to deviate much from that number 8, even when I run more ajax requests). I guess each process can run multiple ajax threads concurrently. I made sure to EXIT from all processes as soon as their done executing. I don't see how the process pool has run out, if there are still 7 unused processes listed under prstat -J. Also, the problem happens somewhat intermittently. Firefox should be able to handle 2 concurrent ajax requests. i dont get what the problem is.

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >