Search Results

Search found 12527 results on 502 pages for 'red eyes dev'.

Page 5/502 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• apt-get update mdadm scary warnings

  - by user568829

  Just ran an apt-get update on one of my dedicated servers to be left with a relatively scary warning: Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-2.6.26-2-686-bigmem W: mdadm: the array /dev/md/1 with UUID c622dd79:496607cf:c230666b:5103eba0 W: mdadm: is currently active, but it is not listed in mdadm.conf. if W: mdadm: it is needed for boot, then YOUR SYSTEM IS NOW UNBOOTABLE! W: mdadm: please inspect the output of /usr/share/mdadm/mkconf, compare W: mdadm: it to /etc/mdadm/mdadm.conf, and make the necessary changes. W: mdadm: the array /dev/md/2 with UUID 24120323:8c54087c:c230666b:5103eba0 W: mdadm: is currently active, but it is not listed in mdadm.conf. if W: mdadm: it is needed for boot, then YOUR SYSTEM IS NOW UNBOOTABLE! W: mdadm: please inspect the output of /usr/share/mdadm/mkconf, compare W: mdadm: it to /etc/mdadm/mdadm.conf, and make the necessary changes. W: mdadm: the array /dev/md/6 with UUID eef74de5:9267b2a1:c230666b:5103eba0 W: mdadm: is currently active, but it is not listed in mdadm.conf. if W: mdadm: it is needed for boot, then YOUR SYSTEM IS NOW UNBOOTABLE! W: mdadm: please inspect the output of /usr/share/mdadm/mkconf, compare W: mdadm: it to /etc/mdadm/mdadm.conf, and make the necessary changes. W: mdadm: the array /dev/md/5 with UUID 5d45b20c:04d8138f:c230666b:5103eba0 W: mdadm: is currently active, but it is not listed in mdadm.conf. if W: mdadm: it is needed for boot, then YOUR SYSTEM IS NOW UNBOOTABLE! W: mdadm: please inspect the output of /usr/share/mdadm/mkconf, compare W: mdadm: it to /etc/mdadm/mdadm.conf, and make the necessary changes. As instructed I inspected the output of /usr/share/mdadm/mkconf and compared with /etc/mdadm/mdadm.conf and they are quite different. Here is the /etc/mdadm/mdadm.conf contents: # mdadm.conf # # Please refer to mdadm.conf(5) for information about this file. # # by default, scan all partitions (/proc/partitions) for MD superblocks. # alternatively, specify devices to scan, using wildcards if desired. DEVICE partitions # auto-create devices with Debian standard permissions CREATE owner=root group=disk mode=0660 auto=yes # automatically tag new arrays as belonging to the local system HOMEHOST <system> # instruct the monitoring daemon where to send mail alerts MAILADDR root # definitions of existing MD arrays ARRAY /dev/md0 level=raid1 num-devices=2 UUID=b93b0b87:5f7c2c46:0043fca9:4026c400 ARRAY /dev/md1 level=raid1 num-devices=2 UUID=c0fa8842:e214fb1a:fad8a3a2:28f2aabc ARRAY /dev/md2 level=raid1 num-devices=2 UUID=cdc2a9a9:63bbda21:f55e806c:a5371897 ARRAY /dev/md3 level=raid1 num-devices=2 UUID=eca75495:9c9ce18c:d2bac587:f1e79d80 # This file was auto-generated on Wed, 04 Nov 2009 11:32:16 +0100 # by mkconf $Id$ And here is the out put from /usr/share/mdadm/mkconf # mdadm.conf # # Please refer to mdadm.conf(5) for information about this file. # # by default, scan all partitions (/proc/partitions) for MD superblocks. # alternatively, specify devices to scan, using wildcards if desired. DEVICE partitions # auto-create devices with Debian standard permissions CREATE owner=root group=disk mode=0660 auto=yes # automatically tag new arrays as belonging to the local system HOMEHOST <system> # instruct the monitoring daemon where to send mail alerts MAILADDR root # definitions of existing MD arrays ARRAY /dev/md1 UUID=c622dd79:496607cf:c230666b:5103eba0 ARRAY /dev/md2 UUID=24120323:8c54087c:c230666b:5103eba0 ARRAY /dev/md5 UUID=5d45b20c:04d8138f:c230666b:5103eba0 ARRAY /dev/md6 UUID=eef74de5:9267b2a1:c230666b:5103eba0 # This configuration was auto-generated on Sat, 25 Feb 2012 13:10:00 +1030 # by mkconf 3.1.4-1+8efb9d1+squeeze1 As I understand it I need to replace the four lines that start with 'ARRAY' in the /etc/mdadm/mdadm.conf file with the different four 'ARRAY' lines from the /usr/share/mdadm/mkconf output. When I did this and then ran update-initramfs -u there were no more warnings. Is what I have done above correct? I am now terrified of rebooting the server for fear it will not reboot and being a remote dedicated server this would certainly mean downtime and possibly would be expensive to get running again. FOLLOW UP (response to question): the output from mount: /dev/md1 on / type ext3 (rw,usrquota,grpquota) tmpfs on /lib/init/rw type tmpfs (rw,nosuid,mode=0755) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) udev on /dev type tmpfs (rw,mode=0755) tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=620) /dev/md2 on /boot type ext2 (rw) /dev/md5 on /tmp type ext3 (rw) /dev/md6 on /home type ext3 (rw,usrquota,grpquota) mdadm --detail /dev/md0 mdadm: md device /dev/md0 does not appear to be active. mdadm --detail /dev/md1 /dev/md1: Version : 0.90 Creation Time : Sun Aug 14 09:43:08 2011 Raid Level : raid1 Array Size : 31463232 (30.01 GiB 32.22 GB) Used Dev Size : 31463232 (30.01 GiB 32.22 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 1 Persistence : Superblock is persistent Update Time : Sat Feb 25 14:03:47 2012 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : c622dd79:496607cf:c230666b:5103eba0 Events : 0.24 Number Major Minor RaidDevice State 0 8 1 0 active sync /dev/sda1 1 8 17 1 active sync /dev/sdb1 mdadm --detail /dev/md2 /dev/md2: Version : 0.90 Creation Time : Sun Aug 14 09:43:09 2011 Raid Level : raid1 Array Size : 104320 (101.89 MiB 106.82 MB) Used Dev Size : 104320 (101.89 MiB 106.82 MB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Persistence : Superblock is persistent Update Time : Sat Feb 25 13:20:20 2012 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : 24120323:8c54087c:c230666b:5103eba0 Events : 0.30 Number Major Minor RaidDevice State 0 8 2 0 active sync /dev/sda2 1 8 18 1 active sync /dev/sdb2 mdadm --detail /dev/md3 mdadm: md device /dev/md3 does not appear to be active. mdadm --detail /dev/md5 /dev/md5: Version : 0.90 Creation Time : Sun Aug 14 09:43:09 2011 Raid Level : raid1 Array Size : 2104448 (2.01 GiB 2.15 GB) Used Dev Size : 2104448 (2.01 GiB 2.15 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 5 Persistence : Superblock is persistent Update Time : Sat Feb 25 14:09:03 2012 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : 5d45b20c:04d8138f:c230666b:5103eba0 Events : 0.30 Number Major Minor RaidDevice State 0 8 5 0 active sync /dev/sda5 1 8 21 1 active sync /dev/sdb5 mdadm --detail /dev/md6 /dev/md6: Version : 0.90 Creation Time : Sun Aug 14 09:43:09 2011 Raid Level : raid1 Array Size : 453659456 (432.64 GiB 464.55 GB) Used Dev Size : 453659456 (432.64 GiB 464.55 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 6 Persistence : Superblock is persistent Update Time : Sat Feb 25 14:10:00 2012 State : active Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : eef74de5:9267b2a1:c230666b:5103eba0 Events : 0.31 Number Major Minor RaidDevice State 0 8 6 0 active sync /dev/sda6 1 8 22 1 active sync /dev/sdb6 FOLLOW UP 2 (response to question): Output from /etc/fstab /dev/md1 / ext3 defaults,usrquota,grpquota 1 1 devpts /dev/pts devpts mode=0620,gid=5 0 0 proc /proc proc defaults 0 0 #usbdevfs /proc/bus/usb usbdevfs noauto 0 0 /dev/cdrom /media/cdrom auto ro,noauto,user,exec 0 0 /dev/dvd /media/dvd auto ro,noauto,user,exec 0 0 # # # /dev/md2 /boot ext2 defaults 1 2 /dev/sda3 swap swap pri=42 0 0 /dev/sdb3 swap swap pri=42 0 0 /dev/md5 /tmp ext3 defaults 0 0 /dev/md6 /home ext3 defaults,usrquota,grpquota 1 2

  Read the article

• Red Sand – An Awesome Fan Made Mass Effect Prequel [Short Movie]

  - by Asian Angel

  Welcome to Mars where humanity has just discovered the Prothean Ruins and Element Zero, but danger abounds as the Red Sand terrorist group seeks to claim Mars for themselves! If you love the Mass Effect game series, then you will definitely want to watch this awesome fan made prequel set 35 years before the events of the first game. Synopsis From YouTube: Serving as a prequel to the MASS EFFECT game series,”Red Sand” is set 35 years before the time of Commander Shepard and tells the story of the discovery of ancient ruins on Mars. Left behind by the mysterious alien race known as the Protheans, the ruins are a treasure trove of advanced technology and the powerful Element Zero, an energy source beyond humanity’s wildest dreams. As the Alliance research team led by Dr. Averroes (Ayman Samman) seeks to unlock the secrets of the ruins, a band of marauders living in the deserts of Mars wants the ruins for themselves. Addicted to refined Element Zero in the form of a narcotic nicknamed “Red Sand” which gives them telekinetic “biotic” powers, these desert-dwelling terrorists will stop at nothing to control the ruins and the rich vein of Element Zero at its core. Standing between them and their goal are Colonel Jon Grissom (Mark Meer), Colonel Lily Sandhurst (Amy Searcy), and a team of Alliance soldiers tasked with defending the ruins at all costs. At stake – the future of humanity’s exploration of the galaxy, and the set up for the MASS EFFECT storyline loved by millions of gamers worldwide. RED SAND: a Mass Effect fan film – starring MARK MEER [via Geeks are Sexy] 7 Ways To Free Up Hard Disk Space On Windows HTG Explains: How System Restore Works in Windows HTG Explains: How Antivirus Software Works

  Read the article

• Ubuntu 12.04 + Raid0 + Windows 7 not loading

  - by Douglas

  please someone help me.... (Sorry for my english) Hi, I have a Pc with 2 Hd (1Tb each) on Raid0. I had a Windows 7 64bits working for several months. When I installed the Windows I let a 100Gb partition empty to install Ubuntu someday. I was using Linux on a Virtualbox, but this week I tried to install Ubuntu 12.04 in this 100Gb partition. I used the Ubuntu alternate cd, because the 'normal' cd was giving me trouble with the Raid0. The grub installation always reported a error. After a lot of work I found that I nedded to install grub on partition /dev/mapper/isw_chjbfeec_DougRaid1 (see Bootinfo below). The Windows installation created a 100Mb boot partition, so I needed to install grub in this partition. Now I have the Ubuntu working 100% ok. The problem is, the Windows is not booting! The windows option is present on the grub menu, but when I choose the windows option there is a black screen and after that the grub is reloaded. My Bootinfo is: Boot Info Script 0.61 [1 April 2012] ============================= Boot Info Summary: =============================== => Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks in partition 1 for /boot/grub. => Grub2 (v1.99) is installed in the MBR of /dev/mapper/isw_chjbfeec_DougRaid and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks in partition 1 for /boot/grub. sda1: __________________________________________________________________________ File system: Boot sector type: Unknown Boot sector info: Mounting failed: mount: unknown filesystem type '' sda2: __________________________________________________________________________ File system: Boot sector type: Unknown Boot sector info: Mounting failed: mount: unknown filesystem type '' mount: unknown filesystem type '' sda3: __________________________________________________________________________ File system: Extended Partition Boot sector type: Unknown Boot sector info: isw_chjbfeec_DougRaid1: ________________________________________________________ File system: ntfs Boot sector type: Grub2 (v1.99) Boot sector info: Grub2 (v1.99) is installed in the boot sector of isw_chjbfeec_DougRaid1 and looks at sector 3841862992 of the same hard drive for core.img. core.img is at this location and looks for (,msdos5)/boot/grub on this drive. No errors found in the Boot Parameter Block. Operating System: Boot files: /grldr /bootmgr /Boot/BCD /grldr isw_chjbfeec_DougRaid2: ________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files: /Windows/System32/winload.exe isw_chjbfeec_DougRaid3: ________________________________________________________ File system: Extended Partition Boot sector type: - Boot sector info: isw_chjbfeec_DougRaid5: ________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 12.04 LTS Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img isw_chjbfeec_DougRaid6: ________________________________________________________ File system: swap Boot sector type: - Boot sector info: ============================ Drive/Partition Info: ============================= Drive: sda _____________________________________________________________________ Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 * 2,048 206,847 204,800 7 NTFS / exFAT / HPFS /dev/sda2 206,848 3,686,402,047 3,686,195,200 7 NTFS / exFAT / HPFS /dev/sda3 3,686,402,558 3,907,039,743 220,637,186 5 Extended Invalid MBR Signature found. EBR refers to a location outside the hard drive. /dev/sda2 ends after the last sector of /dev/sda /dev/sda3 ends after the last sector of /dev/sda Drive: isw_chjbfeec_DougRaid _____________________________________________________________________ Disk /dev/mapper/isw_chjbfeec_DougRaid: 2000.4 GB, 2000404348928 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907039744 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/mapper/isw_chjbfeec_DougRaid1 * 2,048 206,847 204,800 7 NTFS / exFAT / HPFS /dev/mapper/isw_chjbfeec_DougRaid2 206,848 3,686,402,047 3,686,195,200 7 NTFS / exFAT / HPFS /dev/mapper/isw_chjbfeec_DougRaid3 3,686,402,558 3,907,039,743 220,637,186 5 Extended /dev/mapper/isw_chjbfeec_DougRaid5 3,686,402,560 3,881,876,479 195,473,920 83 Linux /dev/mapper/isw_chjbfeec_DougRaid6 3,881,876,992 3,907,039,743 25,162,752 82 Linux swap / Solaris "blkid" output: ________________________________________________________________ Device UUID TYPE LABEL /dev/mapper/isw_chjbfeec_DougRaid1 C89C73D19C73B910 ntfs Reservado pelo Sistema /dev/mapper/isw_chjbfeec_DougRaid2 6830883A3088116C ntfs /dev/mapper/isw_chjbfeec_DougRaid5 bbab868a-ea53-4be3-ba7d-2737fe6cb24c ext4 /dev/mapper/isw_chjbfeec_DougRaid6 7a830a3c-88fb-4cba-80dc-f32e08abfd5b swap /dev/sda isw_raid_member /dev/sdb isw_raid_member /dev/sr0 iso9660 Windows7x86x64SK ========================= "ls -R /dev/mapper/" output: ========================= /dev/mapper: control isw_chjbfeec_DougRaid isw_chjbfeec_DougRaid1 isw_chjbfeec_DougRaid2 isw_chjbfeec_DougRaid3 isw_chjbfeec_DougRaid5 isw_chjbfeec_DougRaid6 ================================ Mount points: ================================= Device Mount_Point Type Options /dev/mapper/isw_chjbfeec_DougRaid5 / ext4 (rw,errors=remount-ro) /dev/sr0 /media/Windows7x86x64SK iso9660 (ro,nosuid,nodev,uid=1000,gid=1000,iocharset=utf8,mode=0400,dmode=0500,uhelper=udisks) ================= isw_chjbfeec_DougRaid1/grldr embedded menu: ================== -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- ================== isw_chjbfeec_DougRaid5/boot/grub/grub.cfg: ================== -------------------------------------------------------------------------------- # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(/dev/mapper/isw_chjbfeec_DougRaid3,msdos1)' search --no-floppy --fs-uuid --set=root bbab868a-ea53-4be3-ba7d-2737fe6cb24c if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm insmod part_msdos insmod ext2 set root='(/dev/mapper/isw_chjbfeec_DougRaid3,msdos1)' search --no-floppy --fs-uuid --set=root bbab868a-ea53-4be3-ba7d-2737fe6cb24c set locale_dir=($root)/boot/grub/locale set lang=en_US insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="$1" if [ "$1" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ ${recordfail} != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "$linux_gfx_mode" != "text" ]; then load_video; fi menuentry 'Ubuntu, with Linux 3.2.0-24-generic-pae' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(/dev/mapper/isw_chjbfeec_DougRaid3,msdos1)' search --no-floppy --fs-uuid --set=root bbab868a-ea53-4be3-ba7d-2737fe6cb24c linux /boot/vmlinuz-3.2.0-24-generic-pae root=UUID=bbab868a-ea53-4be3-ba7d-2737fe6cb24c ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-24-generic-pae } menuentry 'Ubuntu, with Linux 3.2.0-24-generic-pae (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(/dev/mapper/isw_chjbfeec_DougRaid3,msdos1)' search --no-floppy --fs-uuid --set=root bbab868a-ea53-4be3-ba7d-2737fe6cb24c echo 'Loading Linux 3.2.0-24-generic-pae ...' linux /boot/vmlinuz-3.2.0-24-generic-pae root=UUID=bbab868a-ea53-4be3-ba7d-2737fe6cb24c ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-24-generic-pae } submenu "Previous Linux versions" { menuentry 'Ubuntu, with Linux 3.2.0-23-generic-pae' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(/dev/mapper/isw_chjbfeec_DougRaid3,msdos1)' search --no-floppy --fs-uuid --set=root bbab868a-ea53-4be3-ba7d-2737fe6cb24c linux /boot/vmlinuz-3.2.0-23-generic-pae root=UUID=bbab868a-ea53-4be3-ba7d-2737fe6cb24c ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-23-generic-pae } menuentry 'Ubuntu, with Linux 3.2.0-23-generic-pae (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(/dev/mapper/isw_chjbfeec_DougRaid3,msdos1)' search --no-floppy --fs-uuid --set=root bbab868a-ea53-4be3-ba7d-2737fe6cb24c echo 'Loading Linux 3.2.0-23-generic-pae ...' linux /boot/vmlinuz-3.2.0-23-generic-pae root=UUID=bbab868a-ea53-4be3-ba7d-2737fe6cb24c ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-23-generic-pae } } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(/dev/mapper/isw_chjbfeec_DougRaid3,msdos1)' search --no-floppy --fs-uuid --set=root bbab868a-ea53-4be3-ba7d-2737fe6cb24c linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(/dev/mapper/isw_chjbfeec_DougRaid3,msdos1)' search --no-floppy --fs-uuid --set=root bbab868a-ea53-4be3-ba7d-2737fe6cb24c linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober_proxy ### menuentry "Windows 7 (loader) (on /dev/mapper/isw_chjbfeec_DougRaid1)" --class windows --class os { insmod part_msdos insmod ntfs set root='(sda,msdos1)' search --no-floppy --fs-uuid --set=root C89C73D19C73B910 chainloader +1 } ### END /etc/grub.d/30_os-prober_proxy ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### -------------------------------------------------------------------------------- ====================== isw_chjbfeec_DougRaid5/etc/fstab: ======================= -------------------------------------------------------------------------------- # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 /dev/mapper/isw_chjbfeec_DougRaid5 / ext4 errors=remount-ro 0 1 /dev/mapper/isw_chjbfeec_DougRaid6 none swap sw 0 0 -------------------------------------------------------------------------------- ========== isw_chjbfeec_DougRaid5: Location of files loaded by Grub: =========== GiB - GB File Fragment(s) = boot/grub/core.img 1 = boot/grub/grub.cfg 1 = boot/initrd.img-3.2.0-23-generic-pae 2 = boot/initrd.img-3.2.0-24-generic-pae 2 = boot/vmlinuz-3.2.0-23-generic-pae 1 = boot/vmlinuz-3.2.0-24-generic-pae 1 = initrd.img 2 = initrd.img.old 2 = vmlinuz 1 = vmlinuz.old 1 ======================== Unknown MBRs/Boot Sectors/etc: ======================== Unknown BootLoader on sda1 Unknown BootLoader on sda2 Unknown BootLoader on sda3 =============================== StdErr Messages: =============================== xz: (stdin): Compressed data is corrupt xz: (stdin): Compressed data is corrupt hexdump: /dev/sda1: No such file or directory hexdump: /dev/sda1: No such file or directory hexdump: /dev/sda2: No such file or directory hexdump: /dev/sda2: No such file or directory hexdump: /dev/sda3: No such file or directory hexdump: /dev/sda3: No such file or directory xz: (stdin): Compressed data is corrupt awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in How we can see the Windows part at grub is: menuentry "Windows 7 (loader) (on /dev/mapper/isw_chjbfeec_DougRaid1)" --class windows --class os { insmod part_msdos insmod ntfs set root='(sda,msdos1)' search --no-floppy --fs-uuid --set=root C89C73D19C73B910 chainloader +1 } I tried a lot of combinations at the line: set root='(sda,msdos1)' , but no success I tried to change uuid to the /dev/mapper/isw_chjbfeec_DougRaid2 uuid, but the grub reports a error. I dont know what to do now. I really need to boot my windows partition. Someone knows what to do? Thanks........

  Read the article

• Lubuntu upgrade to 13.04 killed sound with ALSA. How to troubleshoot?

  - by Sven

  After upgrading to 13.04 from 12.10 Lubuntu lost audio playback after unplugging usb soundcard (Polycom) and plugging it back in. Volume control was gray and leading to pulseaudio mixer (not installed) so I uninstalled the pulseaudio package. I also removed and reinstalled the alsa-base package. After restart I have the alsamixer back everything seemingly as usual(volume 100%, unmute) but every sound program gets me errors no matter what device I select. aplay -L: null Discard all samples (playback) or generate zero samples (capture) pulse PulseAudio Sound Server default:CARD=NVidia HDA NVidia, ALC662 rev1 Analog Default Audio Device sysdefault:CARD=NVidia HDA NVidia, ALC662 rev1 Analog Default Audio Device front:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Front speakers surround40:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 4.0 Surround output to Front and Rear speakers surround41:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers iec958:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Digital IEC958 (S/PDIF) Digital Audio Output hdmi:CARD=NVidia,DEV=0 HDA NVidia, HDMI 0 HDMI Audio Output dmix:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Direct sample mixing device dmix:CARD=NVidia,DEV=1 HDA NVidia, ALC662 rev1 Digital Direct sample mixing device dmix:CARD=NVidia,DEV=3 HDA NVidia, HDMI 0 Direct sample mixing device dsnoop:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Direct sample snooping device dsnoop:CARD=NVidia,DEV=1 HDA NVidia, ALC662 rev1 Digital Direct sample snooping device dsnoop:CARD=NVidia,DEV=3 HDA NVidia, HDMI 0 Direct sample snooping device hw:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Direct hardware device without any conversions hw:CARD=NVidia,DEV=1 HDA NVidia, ALC662 rev1 Digital Direct hardware device without any conversions hw:CARD=NVidia,DEV=3 HDA NVidia, HDMI 0 Direct hardware device without any conversions plughw:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Hardware device with all software conversions plughw:CARD=NVidia,DEV=1 HDA NVidia, ALC662 rev1 Digital Hardware device with all software conversions plughw:CARD=NVidia,DEV=3 HDA NVidia, HDMI 0 Hardware device with all software conversions default:CARD=Communicator Default Audio Device sysdefault:CARD=Communicator Default Audio Device front:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio Front speakers surround40:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio 4.0 Surround output to Front and Rear speakers surround41:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers iec958:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio IEC958 (S/PDIF) Digital Audio Output dmix:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio Direct sample mixing device dsnoop:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio Direct sample snooping device hw:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio Direct hardware device without any conversions plughw:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio Hardware device with all software conversions etc/asound.conf: defaults.ctl.card 1 defaults.pcm.card 1 defaults.pcm.device 1 Following gets same result with both devices. aplay -vv -D front:CARD=NVidia,DEV=0 "Release the Pressure.wav": Playing WAVE 'Release the Pressure.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Mono aplay: set_params:1087: Channels count non available Guayadeque mp3 playback: AL lib: alsa_open_playback: Could not open playback device 'default': No such file or directory 21:32:14: Error: Gstreamer error 'Configured audiosink playbackbin is not working.' Audacious: ALSA error: snd_mixer_attach failed: No such file or directory. ALSA error: snd_pcm_open failed: No such device. So How do I fix my audio? UPDATE: I removed the usb soundcard and got rid of all alsa config. Everything is working as before the install but it sure feels fragile.

  Read the article

• My Red Gate Experience

  - by Colin Rothwell

  I’m Colin, and I’ve been an intern working with Mike in publishing on Simple-Talk and SQLServerCentral for the past ten weeks. I’ve mostly been working “behind the scenes”, making improvements to the spam filtering, along with various other small tweaks. When I arrived at Red Gate, one of the first things Mike asked me was what I wanted to get out of the internship. It wasn’t a question I’d given a great deal of thought to, but my immediate response was the same as almost anybody: to support my growing family. Well, ok, not quite that, but money was certainly a motivator, along with simply making sure that I didn’t get bored over the summer. Three months is a long time to fill, and many of my friends end up getting bored, or worse, knitting obsessively. With the arrogance which seems fairly common among Cambridge people, I wasn’t expecting to really learn much here! In my mind, the part of the year where I am at Uni is the part where I learn things, whilst Red Gate would be an opportunity to apply what I’d learnt. Thankfully, the opposite is true: I’ve learnt a lot during my time here, and there has been a definite positive impact on the way I write code. The first thing I’ve really learnt is that test-driven development is, in general, a sensible way of working. Before coming, I didn’t really get it: how could you test something you hadn’t yet written? It didn’t make sense! My problem was seeing a test as having to test all the behaviour of a given function. Writing tests which test the bare minimum possible and building them up is a really good way of crystallising the direction the code needs to grow in, and ensures you never attempt to write too much code at time. One really good experience of this was early on in my internship when Mike and I were working on the query used to list active authors: I’d written something which I thought would do the trick, but by starting again using TDD we grew something which revealed that there were several subtle mistakes in the query I’d written. I’ve also been awakened to the value of pair programming. Whilst I could sort of see the point before coming, I also thought that it was impossible that two people would ever get more done at the same computer than if they were working separately. I still think that this is true for projects with pieces that developers can easily work on independently, and with developers who both know the codebase, but I’ve found that pair programming can be really good for learning a code base, and for building up small projects to the point where you can start working on separate components, as well as solving particularly difficult problems. Later on in my internship, for my down tools week project, I was working on adding Python support to Glimpse. Another intern and I we pair programmed the entire project, using ping pong pair programming as much as possible. One bonus that this brought which I wasn’t expecting was that I found myself less prone to distraction: with someone else peering over my shoulder, I didn’t have the ever-present temptation to open gmail, or facebook, or yammer, or twitter, or hacker news, or reddit, and so on, and so forth. I’m quite proud of this project: I think it’s some of the best code I’ve written. I’ve also been really won over to the value of descriptive variables names. In my pre-Red Gate life, as a lone-ranger style cowboy programmer, I’d developed a tendency towards laziness in variable names, sometimes abbreviating or, worse, using acronyms. I’ve swiftly realised that this is a bad idea when working with a team: saving a few key strokes is inevitably not worth it when it comes to reading code again in the future. Longer names also mean you can do away with a majority of comments. I appreciate that if you’ve come up with an O(n*log n) algorithm for something which seemed O(n^2), you probably want to explain how it works, but explaining what a variable name means is a big no no: it’s so very easy to change the behaviour of the code, whilst forgetting about the comments. Whilst at Red Gate, I took the opportunity to attend a code retreat, which really helped me to solidify all the things I’d learnt. To be completely free of any existing code base really lets you focus on best practises and think about how you write code. If you get a chance to go on a similar event, I’d highly recommend it! Cycling to Red Gate, I’ve also become much better at fitting inner tubes: if you’re struggling to get the tube out, or re-fit the tire, letting a bit of air out usually helps. I’ve also become quite a bit better at foosball and will miss having a foosball table! I’d like to finish off by saying thank you to everyone at Red Gate for having me. I’ve really enjoyed working with, and learning from, the team that brings you this web site. If you meet any of them, buy them a drink!

  Read the article

• xvidcap: Error accessing sound input from /dev/dsp

  - by stivlo

  I'm running Ubuntu 11.10 and I'm trying xvidcap to record a screencast with audio from the microphone, however it can't record any sound: $ xvidcap --file appo.avi --cap_geometry 700x500-0+0 Error accessing sound input from /dev/dsp Sound disabled! Sure enough /dev/dsp doesn't even exist: $ sudo ls -lh /dev/dsp ls: cannot access /dev/dsp: No such file or directory I found a blog post about fixing xvidcap sound input, however if I try the suggestion I get: $ sudo modprobe snd-pcm-oss FATAL: Module snd_pcm_oss not found. So the question is, how can I create /dev/dsp? The problem behind the problem is: how can I record sound from the microphone with xvidcap? So workarounds are welcome too. UPDATE: I've followed the suggestion of James, and something has improved. The error accessing /dev/dsp is gone, however now I get: [oss @ 0x8e0c120] Estimating duration from bitrate, this may be inaccurate xtoffmpeg.c add_audio_stream(): Can't initialize fifo for audio recording Now when I record xvidcap appears in the recording tab of pavucontrol and I can choose Audio stream from Internal Audio Analog Stereo or Monitor of Internal Audio Analog Stereo, I tried both just in case, but the video is still mute. UPDATE 2: I found that "Monitor of" is the one to record application sounds, while for microphone, I should choose "Internal Audio Analog Stereo". To rule out other problems, such as with the microphone, I tried with gnome-sound-recorder and it works. Actually I jumped on my chair, since the volume was too high! :-)

  Read the article

• Missing /dev/xconsole causes rsyslog to stop as well as all other services

  - by George Van Tuyl

  We are running Ubuntu-10.04.04LTS in Hyper-V environments. We found that the services ssh http or anything else stopped because the rsyslog daemon had died with the message unable to find the /dev/xconsole file. I fixed it temporarily with the following. FILE=/dev/xconsole if [ -e $FILE ]; then echo "$FILE exists Carry on!" else mknod -m 640 /dev/xconsole c 1 3 chown syslog:adm /dev/xconsole echo "Created $FILE." fi The problem is that I can not get rsyslog daemon to process these 8 lines when I restart the daemon. Also restarting the daemon removes the /dev/xconsole file and we are back to all service stopped. In addressing this problem I have inserted the if--fi lines after the start and restart conditions in the rsyslog script. The problem is I do not get an echo to stdio. Does someone have an idea on how to make the rsyslog report to stdio when it creates the /dev/xconsole device. Thanks George Van Tuyl

  Read the article

• Installing Ubuntu 12.04.1 x64 with Fake RAID 1 [SOLVED]

  - by Arkadius

  I had: Software: Dual boot with Windows XP Ubuntu 10.04 LTS x32 Hardware Fake RAID 1 (mirroring) with 2x1 TB: Partition 1 - Windows Partition 2 - SWAP Partition 3 - / (root) Partition 4 - Extended Partition 5 - /home Partition 6 - /data arek@domek:/var/log/installer$ sudo fdisk -l Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000de1b9 Device Boot Start End Blocks Id System /dev/sda1 * 63 524297339 262148638+ 7 HPFS/NTFS/exFAT /dev/sda2 524297340 528506369 2104515 82 Linux swap / Solaris /dev/sda3 528506370 570468149 20980890 83 Linux /dev/sda4 570468150 1953118439 691325145 5 Extended /dev/sda5 570468213 675340469 52436128+ 83 Linux /dev/sda6 675340533 1953118439 638888953+ 83 Linux Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000de1b9 Device Boot Start End Blocks Id System /dev/sdb1 * 63 524297339 262148638+ 7 HPFS/NTFS/exFAT /dev/sdb2 524297340 528506369 2104515 82 Linux swap / Solaris /dev/sdb3 528506370 570468149 20980890 83 Linux /dev/sdb4 570468150 1953118439 691325145 5 Extended /dev/sdb5 570468213 675340469 52436128+ 83 Linux /dev/sdb6 675340533 1953118439 638888953+ 83 Linux arek@domek:/var/log/installer$ ls -l /dev/mapper/ total 0 crw------- 1 root root 10, 236 Oct 7 20:17 control lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha -> ../dm-0 lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha1 -> ../dm-1 lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha2 -> ../dm-2 lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha3 -> ../dm-3 lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha4 -> ../dm-4 lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha5 -> ../dm-5 lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha6 -> ../dm-6 I wanted to upgrade from 10.04 x32 to 12.04 x64 using FRESH installation. So, run installation of Ubuntu 12.04.1 x64 LTS using alternate CD. During the installation I selected manual partitioning and to: - Use and Format / (root) - Use and Format SWAP - Use and Keep data on /home - Use and Keep data on /data After I clicked "Continue" I get error creating and formatting SWAP partition. I go to terminal with Alt + F2 (?) and hit enter. I discovered that there was visible RAID as only disk with NO partitions. Something like this: arek@domek:/var/log/installer$ ls -l /dev/mapper/ lrwxrwxrwx 1 root root 7 Oct 7 20:17 /dev/mapper/pdc_jhjbcaha -> ../dm-0 arek@domek:/var/log/installer$ ls -l /dev/dm* brw-rw---- 1 root disk 252, 0 Oct 7 20:17 /dev/dm-0 So I switched to log console Alt+F3 (?) and saw errors like below: Oct 7 14:02:45 check-missing-firmware: /dev/.udev/firmware-missing does not exist, skipping Oct 7 14:02:45 check-missing-firmware: /run/udev/firmware-missing does not exist, skipping Oct 7 14:02:45 check-missing-firmware: no missing firmware in /dev/.udev/firmware-missing /run/udev/firmware-missing Oct 7 14:02:45 anna-install: Installing dmraid-udeb Oct 7 14:02:45 anna[12599]: DEBUG: retrieving dmraid-udeb 1.0.0.rc16-4.1ubuntu8 Oct 7 14:02:49 anna[12599]: DEBUG: retrieving libdmraid1.0.0.rc16-udeb 1.0.0.rc16-4.1ubuntu8 Oct 7 14:02:49 anna[12599]: DEBUG: retrieving kpartx-udeb 0.4.9-3ubuntu5 Oct 7 14:02:49 disk-detect: Serial ATA RAID disk(s) detected. Oct 7 14:02:55 disk-detect: Enabling dmraid support. Oct 7 14:02:55 disk-detect: RAID set "pdc_jhjbcaha" was activated Oct 7 14:02:55 HERE --> dmraid-activate: ERROR: Cannot retrieve RAID set information for pdc_jhjbcaha Oct 7 14:02:56 check-missing-firmware: /dev/.udev/firmware-missing does not exist, skipping Oct 7 14:02:56 check-missing-firmware: /run/udev/firmware-missing does not exist, skipping Oct 7 14:02:56 check-missing-firmware: no missing firmware in /dev/.udev/firmware-missing /run/udev/firmware-missing Oct 7 14:02:57 main-menu[428]: DEBUG: resolver (libnewt0.52): package doesn't exist (ignored) Oct 7 14:02:57 main-menu[428]: DEBUG: resolver (ext2-modules): package doesn't exist (ignored) Oct 7 14:02:57 main-menu[428]: INFO: Menu item 'partman-base' selected Oct 7 14:02:57 kernel: [ 316.512999] NTFS driver 2.1.30 [Flags: R/O MODULE]. Oct 7 14:02:57 kernel: [ 316.523221] Btrfs loaded Oct 7 14:02:57 kernel: [ 316.534781] JFS: nTxBlock = 8192, nTxLock = 65536 Oct 7 14:02:57 kernel: [ 316.554749] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled Oct 7 14:02:57 kernel: [ 316.555336] SGI XFS Quota Management subsystem Oct 7 14:02:58 md-devices: mdadm: No arrays found in config file or automatically Oct 7 14:02:58 partman: No matching physical volumes found Oct 7 14:02:58 partman: No volume groups found Oct 7 14:02:58 partman: Reading all physical volumes. This may take a while... Oct 7 14:02:58 partman-lvm: No volume groups found Oct 7 14:02:58 partman: Error running 'tune2fs -l /dev/mapper/pdc_jhjbcaha' Oct 7 14:02:58 partman: Error running 'tune2fs -l /dev/mapper/pdc_jhjbcaha' Oct 7 14:02:58 partman: Error running 'tune2fs -l /dev/mapper/pdc_jhjbcaha' Oct 7 14:06:11 HERE --> partman: mkswap: can't open '/dev/mapper/pdc_jhjbcaha2': No such file or directory Oct 7 14:07:28 init: starting pid 401, tty '/dev/tty2': '-/bin/sh' Oct 7 14:15:00 net/hw-detect.hotplug: Detected hotpluggable network interface eth0 Oct 7 14:15:00 net/hw-detect.hotplug: Detected hotpluggable network interface lo As You can see there are 2 errors Oct 7 14:02:55 dmraid-activate: ERROR: Cannot retrieve RAID set information for pdc_jhjbcaha and Oct 7 14:06:11 partman: mkswap: can't open '/dev/mapper/pdc_jhjbcaha2': No such file or directory I looked in the internet and try to run command "dmraid -ay" and get something like that: dmraid -ay /dev/mapper/pdc_jhjbcaha -> Already activated /dev/mapper/pdc_jhjbcaha1 -> Successfully activated /dev/mapper/pdc_jhjbcaha2 -> Successfully activated /dev/mapper/pdc_jhjbcaha3 -> Successfully activated /dev/mapper/pdc_jhjbcaha4 -> Successfully activated /dev/mapper/pdc_jhjbcaha5 -> Successfully activated /dev/mapper/pdc_jhjbcaha6 -> Successfully activated Then I returned to installer with Alt+F1 (?) and click "Return" to return to partitioning menu. I did NOT change anything just selected again "Continue" and everything goes smoothly. I hope this will help someone. arkadius

  Read the article

• Swap partition not recognized (The disk drive with UUID=... is not ready yet or not present)

  - by ladaghini

  I think I had an encrypted swap partition, because I chose to encrypt my home directory during the installation. I believe that's what the line with /dev/mapper/cryptswap1 ... in my /etc/fstab is all about. I did something to bork my swap because on the next boot, I got a message (paraphrased): The disk drive for /dev/mapper/cryptswap1 is not ready yet or not present. Wait to continue. Press S to skip or M to manually recover. (As a side note, pressing S or M seemed to do nothing different from just waiting.) Here's what I've tried: This tutorial on how to fix the swap partition not mounting. However, in the above, the mkswap command fails because the device is busy. So I booted from a live USB, ran GParted to reformat the swap partition (which showed up as an unknown fs type), and chrooted into the broken system to try that tutorial again. I also adjusted /etc/initramfs-tools/conf.d/resume and /etc/fstab to reflect the new UUID generated from formatting the partition as a swap. That still didn't work; instead of /dev/mapper/cryptswap1 not present, "The disk drive with UUID=[swap partition's UUID] is not ready yet or not present..." So I decided to start afresh as though I never had created a swap partition in the first place. From the Live USB, I deleted the swap partition altogether (which, again showed up in GParted as an unknown fs type), removed the swap and cryptswap entries in /etc/fstab as well as removed /etc/initramfs-tools/conf.d/resume and /etc/crypttab. At this point the main system shouldn't be considered broken because there is no swap partition and no instructions to mount one, right? I didn't get any errors during startup. I followed the same instructions to create and encrypt the swap partition, starting with creating a partition for the swap, though I think fdisk said a reboot was necessary to see changes. I was confident the 3rd process above would work, but the problem yet persists. Some relevant info (/dev/sda8 is the swap partition): /etc/fstab file: # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda6 during installation UUID=4c11e82c-5fe9-49d5-92d9-cdaa6865c991 / ext4 errors=remount-ro 0 1 # /boot was on /dev/sda5 during installation UUID=4031413e-e89f-49a9-b54c-e887286bb15e /boot ext4 defaults 0 2 # /home was on /dev/sda7 during installation UUID=d5bbfc6f-482a-464e-9f26-fd213230ae84 /home ext4 defaults 0 2 # swap was on /dev/sda8 during installation UUID=5da2c720-8787-4332-9317-7d96cf1e9b80 none swap sw 0 0 /dev/mapper/cryptswap1 none swap sw 0 0 output of sudo mount: /dev/sda6 on / type ext4 (rw,errors=remount-ro) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) /dev/sda5 on /boot type ext4 (rw) /dev/sda7 on /home type ext4 (rw) /home/undisclosed/.Private on /home/undisclosed type ecryptfs (ecryptfs_check_dev_ruid,ecryptfs_cipher=aes,ecryptfs_key_bytes=16,ecryptfs_unlink_sigs,ecryptfs_sig=cbae1771abd34009,ecryptfs_fnek_sig=7cefe2f59aab8e58) gvfs-fuse-daemon on /home/undisclosed/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=undisclosed) output of sudo blkid (note that /dev/sda8 is missing): /dev/sda1: LABEL="SYSTEM" UUID="960490E80490CC9D" TYPE="ntfs" /dev/sda2: UUID="D4043140043126C0" TYPE="ntfs" /dev/sda3: LABEL="Shared" UUID="80F613E1F613D5EE" TYPE="ntfs" /dev/sda5: UUID="4031413e-e89f-49a9-b54c-e887286bb15e" TYPE="ext4" /dev/sda6: UUID="4c11e82c-5fe9-49d5-92d9-cdaa6865c991" TYPE="ext4" /dev/sda7: UUID="d5bbfc6f-482a-464e-9f26-fd213230ae84" TYPE="ext4" /dev/mapper/cryptswap1: UUID="41fa147a-3e2c-4e61-b29b-3f240fffbba0" TYPE="swap" output of sudo fdisk -l: Disk /dev/mapper/cryptswap1 doesn't contain a valid partition table Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xdec3fed2 Device Boot Start End Blocks Id System /dev/sda1 * 2048 409599 203776 7 HPFS/NTFS/exFAT /dev/sda2 409600 210135039 104862720 7 HPFS/NTFS/exFAT /dev/sda3 210135040 415422463 102643712 7 HPFS/NTFS/exFAT /dev/sda4 415424510 625141759 104858625 5 Extended /dev/sda5 415424512 415922175 248832 83 Linux /dev/sda6 415924224 515921919 49998848 83 Linux /dev/sda7 515923968 621389823 52732928 83 Linux /dev/sda8 621391872 625141759 1874944 82 Linux swap / Solaris Disk /dev/mapper/cryptswap1: 1919 MB, 1919942656 bytes 255 heads, 63 sectors/track, 233 cylinders, total 3749888 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xaf5321b5 /etc/initramfs-tools/conf.d/resume file: RESUME=UUID=5da2c720-8787-4332-9317-7d96cf1e9b80 /etc/crypttab file: cryptswap1 /dev/sda8 /dev/urandom swap,cipher=aes-cbc-essiv:sha256 output of sudo swapon -as: Filename Type Size Used Priority /dev/mapper/cryptswap1 partition 1874940 0 -1 output of sudo free -m: total used free shared buffers cached Mem: 1476 1296 179 0 35 671 -/+ buffers/cache: 590 886 Swap: 1830 0 1830 So, how can this be fixed?

  Read the article

• Red Hat's Virtualization Technology Rev

  Virtually Speaking: Red Hat has announced an update for its virtualization technology suite. Is it time to add Red Hat Enterprise Virtualization to your short list?

  Read the article

• Red Hat Revs Up RHEV Enterprise Virtualization

  <b>Datamation:</b> "Linux vendor Red Hat (NYSE:RHT) today announced the beta availability of its next virtualization platform -- Red Hat Enterprise Virtualization (RHEV) 2.2."

  Read the article

• At Last, Red Hat Enterprise Linux 6

  <b>Linux Planet:</b> "Linux vendor Red Hat today released the first public beta of Red Hat Enterprise Linux 6 (RHEL 6), giving observers a look at what's to come in the next version of its flagship operating system platform."

  Read the article

• Red Gate Software announces speaker line up for US SQL in the City tour

  SQL in the City is a free, full day training and networking event for database professionals. After the success of last year’s event, Red Gate has expanded the event to cover six cities from sea to shining sea, including: New York, Austin, San Francisco, Chicago, Boston, and Seattle. Compress live data by 73% Red Gate's SQL Storage Compress reduces the size of live SQL Server databases, saving you disk space and storage costs. Learn more.

  Read the article

• How Red Hat Made Money in 2010 (up 15% year over year)

  <b>Datamation:</b> "The past twelve months have been good for Linux vendor Red Hat as the company grew revenues and income while expanding its product offerings in the cloud and virtualization space. But how did Red Hat grow while others staggered?"

  Read the article

• What is a good way to set up a dev, staging and production workflow with wordpress

  - by blockhead

  Wordpress presents some challenges since it tends to keep too much in the database, making it hard to move from server to server. What are some other issues to look out for? What was your workflow like?

  Read the article

• Android Dev: The constructor Intent(new View.OnClickListener(){}, Class<DrinksTwitter>) is undefined

  - by Malcolm Woods Spark

  package com.android.drinksonme; import android.app.Activity; import android.content.Intent; import android.os.Bundle; import android.view.View; import android.view.View.OnClickListener; import android.widget.Button; import android.widget.EditText; import android.widget.TextView; public class Screen2 extends Activity { // Declare our Views, so we can access them later private EditText etUsername; private EditText etPassword; private Button btnLogin; private Button btnSignUp; private TextView lblResult; @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.main); // Get the EditText and Button References etUsername = (EditText)findViewById(R.id.username); etPassword = (EditText)findViewById(R.id.password); btnLogin = (Button)findViewById(R.id.login_button); btnSignUp = (Button)findViewById(R.id.signup_button); lblResult = (TextView)findViewById(R.id.result); // Set Click Listener btnLogin.setOnClickListener(new OnClickListener() { @Override public void onClick(View v) { // Check Login String username = etUsername.getText().toString(); String password = etPassword.getText().toString(); if(username.equals("test") && password.equals("test")){ final Intent i = new Intent(this, DrinksTwitter.class); //error on this line startActivity(i); // lblResult.setText("Login successful."); } else { lblResult.setText("Invalid username or password."); } } }); final Intent k = new Intent(Screen2.this, SignUp.class); btnSignUp.setOnClickListener(new OnClickListener() { public void onClick(View v) { startActivity(k); } }); } }

  Read the article

• MySQL tmpdir on /dev/shm with SELinux

  - by smorfnip

  On RHEL5, I have a small MySQL database that has to write temp files. To speed up this process, I would like to move the temporary directory to /dev/shm by putting the following line into my.cnf: tmpdir=/dev/shm/mysqltmp I can create /dev/shm/mysqltmp just fine and do chown mysql:mysql /dev/shm/mysqltmp chcon --reference /tmp/ /dev/shm/mysqltmp I've tried to make SELinux happy by applying the same settings that are in effect for /tmp/ (and /var/tmp/), which is presumably where MySQL is writing its tmp files if tmpdir is undefined. The problem is that SELinux complains about MySQL having access to that directory. I get the following in /var/log/messages: SELinux is preventing mysqld (mysqld_t) "getattr" to /dev/shm (tmpfs_t). SELinux is a hard mistress. Details: Source Context root:system_r:mysqld_t Target Context system_u:object_r:tmpfs_t Target Objects /dev/shm [ dir ] Source mysqld Source Path /usr/libexec/mysqld Port <Unknown> Host db.example.com Source RPM Packages mysql-server-5.0.77-3.el5 Target RPM Packages Policy RPM selinux-policy-2.4.6-255.el5_4.1 Selinux Enabled True Policy Type targeted MLS Enabled True Enforcing Mode Enforcing Plugin Name catchall_file Host Name db.example.com Platform Linux db.example.com 2.6.18-164.2.1.el5 #1 SMP Mon Sep 21 04:37:42 EDT 2009 x86_64 x86_64 Alert Count 46 First Seen Wed Nov 4 14:23:48 2009 Last Seen Thu Nov 5 09:46:00 2009 Local ID e746d880-18f6-43c1-b522-a8c0508a1775 ls -lZ /dev/shm shows drwxrwxr-x mysql mysql system_u:object_r:tmp_t mysqltmp and permissions for /dev/shm itself are drwxrwxrwt root root system_u:object_r:tmpfs_t shm I've also tried chcon -R -t mysqld_t /dev/shm/mysqltmp and setting the group on /dev/shm to mysql with no better results. Shouldn't it be enough to tell SELinux, hey, this is a temp directory just like MySQL was using before? Short of turning off SELinux, how do I make this work? Do I need to edit SELinux policy files?

  Read the article

• raid md device is not remove from memory, how to overcome this problem

  - by santhosha

  i create raid 10 , i removed two arrays form md11 one by one , after that i going to editing the contents those are mounted ( it will be not responding stage), after i try for remove arrays those are left it is shows device or resource busy ( is not removed from memory). i try to terminate process this is also not work, i absorve from 4 days resync will be 8.0% it can not modifying. cat /proc/mdstat Personalities : [raid1] [raid0] [raid6] [raid5] [raid4] [linear] [raid10] md11 : active raid10 sde1[3] sdj14 286743936 blocks 64K chunks 2 near-copies [4/1] [___U] [1:2:3:0] [=...................] resync = 8.0% (23210368/286743936) finish=289392.6min speed=15K/sec mdadm -D /dev/md11 /dev/md11: Version : 00.90.03 Creation Time : Sun Jan 16 16:20:01 2011 Raid Level : raid10 Array Size : 286743936 (273.46 GiB 293.63 GB) Device Size : 143371968 (136.73 GiB 146.81 GB) Raid Devices : 4 Total Devices : 2 Preferred Minor : 11 Persistence : Superblock is persistent Update Time : Sun Jan 16 16:56:07 2011 State : active, degraded, resyncing Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 Layout : near=2, far=1 Chunk Size : 64K Rebuild Status : 8% complete UUID : 5e124ea4:79a01181:dc4110d3:a48576ea Events : 0.23 Number Major Minor RaidDevice State 0 0 0 0 removed 1 0 0 1 removed 4 8 145 2 faulty spare rebuilding /dev/sdj1 3 8 65 3 active sync /dev/sde1 umount /dev/md11 umount: /dev/md11: not mounted mdadm -S /dev/md11 mdadm: fail to stop array /dev/md11: Device or resource busy lsof /dev/md11 COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME mount 2128 root 3r BLK 9,11 4058 /dev/md11 mount 5018 root 3r BLK 9,11 4058 /dev/md11 mdadm 27605 root 3r BLK 9,11 4058 /dev/md11 mount 30562 root 3r BLK 9,11 4058 /dev/md11 badblocks 30591 root 3r BLK 9,11 4058 /dev/md11 kill -9 2128 kill -9 5018 kill -9 27605 kill -9 30562 kill -3 30591 mdadm -S /dev/md11 mdadm: fail to stop array /dev/md11: Device or resource busy lsof /dev/md11 COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME mount 2128 root 3r BLK 9,11 4058 /dev/md11 mount 5018 root 3r BLK 9,11 4058 /dev/md11 mdadm 27605 root 3r BLK 9,11 4058 /dev/md11 mount 30562 root 3r BLK 9,11 4058 /dev/md11 badblocks 30591 root 3r BLK 9,11 4058 /dev/md11 cat /proc/mdstat Personalities : [raid1] [raid0] [raid6] [raid5] [raid4] [linear] [raid10] md11 : active raid10 sde1[3] sdj14 286743936 blocks 64K chunks 2 near-copies [4/1] [___U] [1:2:3:0] [=...................] resync = 8.0% (23210368/286743936) finish=289392.6min speed=15K/sec

  Read the article

• Inside Red Gate - Be Reasonable!

  - by simonc

  As I discussed in my previous posts, divisions and project teams within Red Gate are allowed a lot of autonomy to manage themselves. It's not just the teams though, there's an awful lot of freedom given to individual employees within the company as well. Reasonableness How Red Gate treats it's employees is embodied in the phrase 'You will be reasonable with us, and we will be reasonable with you'. As an employee, you are trusted to do your job to the best of you ability. There's no one looking over your shoulder, no one clocking you in and out each day. Everyone is working at the company because they want to, and one of the core ideas of Red Gate is that the company exists to 'let people do the best work of their lives'. Everything is geared towards that. To help you do your job, office services and the IT department are there. If you need something to help you work better (a third or fourth monitor, footrests, or a new keyboard) then ask people in Information Systems (IS) or Office Services and you will be given it, no questions asked. Everyone has administrator access to their own machines, and you can install whatever you want on it. If there's a particular bit of software you need, then ask IS and they will buy it. As an example, last year I wanted to replace my main hard drive with an SSD; I had a summer job at school working in a computer repair shop, so knew what to do. I went to IS and asked for 'an SSD, a SATA cable, and a screwdriver'. And I got it there and then, even the screwdriver. Awesome. I screwed it in myself, copied all my main drive files across, and I was good to go. Of course, if you're not happy doing that yourself, then IS will sort it all out for you, no problems. If you need something that the company doesn't have (say, a book off Amazon, or you need some specifications printing off & bound), then everyone has a expense limit of £100 that you can use without any sign-off needed from your managers. If you need a company credit card for whatever reason, then you can get it. This freedom extends to working hours and holiday; you're expected to be in the office 11am-3pm each day, but outside those times you can work whenever you want. If you need a half-day holiday on a days notice, or even the same day, then you'll get it, unless there's a good reason you're needed that day. If you need to work from home for a day or so for whatever reason, then you can. If it's reasonable, then it's allowed. Trust issues? A lot of trust, and a lot of leeway, is given to all the people in Red Gate. Everyone is expected to work hard, do their jobs to the best of their ability, and there will be a minimum of bureaucratic obstacles that stop you doing your work. What happens if you abuse this trust? Well, an example is company trip expenses. You're free to expense what you like; food, drink, transport, etc, but if you expenses are not reasonable, then you will never travel with the company again. Simple as that. Everyone knows when they're abusing the system, so simply don't do it. Along with reasonableness, another phrase used is 'Don't be an a**hole'. If you act like an a**hole, and abuse any of the trust placed in you, even if you're the best tester, salesperson, dev, or manager in the company, then you won't be a part of the company any more. From what I know about other companies, employee trust is highly variable between companies, all the way up to CCTV trained on employee's monitors. As a dev, I want to produce well-written & useful code that solves people's problems. Being able to get whatever I need - install whatever tools I need, get time off when I need to, obtain reference books within a day - all let me do my job, and so let Red Gate help other people do their own jobs through the tools we produce. Plus, I don't think I would like working for a company that doesn't allow admin access to your own machine and blocks Facebook! Cross posted from Simple Talk.

  Read the article

• Red Dot Scope Makes Sighting In Long Lenses a Snap

  - by Jason Fitzpatrick

  If you’ve ever used a high power lens, you know how tricky it can be to sight a distant subject as the field of view through the lens is so tiny. This hack takes care of that problem by using a zero-magnification red dot rifle scope. Chris Malcolm enjoys photographing birds and other wildlife with high power lenses. The problem, when shooting with huge 500mm lens and other high power lenses, is that they’re practically telescopes and acquiring a fast moving target like a bird using a through-the-lens technique is very tricky. Malcolm’s solution hinges on mounting a zero-magnification red dot rifle scope in parallel with the lens. His mock up is a bit unpolished (although we can understand not wanting to run out and buy a brand new black scope just for the experiment) but works great to get him on target. Hit up the link below to read more about his build, how be created the rail mount for the scope, and why he opted to mount it to the barrel of the lens and not the hot shoe mount on the camera. 500mm Reflex Lens with Red Dot Sight [via DIY Photography] Make Your Own Windows 8 Start Button with Zero Memory Usage Reader Request: How To Repair Blurry Photos HTG Explains: What Can You Find in an Email Header?

  Read the article

• Can't re-mount existing RAID10 on Ubuntu

  - by Zoran

  I saw similar questions, but didn't find what solution to my problem. After power-cut, one of RAID10 (4 disks were) appears to be malfunctioning. I make tha array active one, but can not mount it. Always the same error: mount: you must specify the filesystem type So, here is what I have when type mdadm --detail /dev/md0 /dev/md0: Version : 00.90.03 Creation Time : Tue Sep 1 11:00:40 2009 Raid Level : raid10 Array Size : 1465148928 (1397.27 GiB 1500.31 GB) Used Dev Size : 732574464 (698.64 GiB 750.16 GB) Raid Devices : 4 Total Devices : 3 Preferred Minor : 0 Persistence : Superblock is persistent Update Time : Mon Jun 11 09:54:27 2012 State : clean, degraded Active Devices : 3 Working Devices : 3 Failed Devices : 0 Spare Devices : 0 Layout : near=2, far=1 Chunk Size : 64K UUID : 1a02e789:c34377a1:2e29483d:f114274d Events : 0.166 Number Major Minor RaidDevice State 0 8 16 0 active sync /dev/sdb 1 0 0 1 removed 2 8 48 2 active sync /dev/sdd 3 8 64 3 active sync /dev/sde At the /etc/mdadm/mdadm.conf I have by default, scan all partitions (/proc/partitions) for MD superblocks. alternatively, specify devices to scan, using wildcards if desired. DEVICE partitions auto-create devices with Debian standard permissions CREATE owner=root group=disk mode=0660 auto=yes automatically tag new arrays as belonging to the local system HOMEHOST <system> instruct the monitoring daemon where to send mail alerts MAILADDR root definitions of existing MD arrays ARRAY /dev/md0 level=raid10 num-devices=4 UUID=1a02e789:c34377a1:2e29483d:f114274d ARRAY /dev/md1 level=raid1 num-devices=2 UUID=9b592be7:c6a2052f:2e29483d:f114274d This file was auto-generated... So, my question is, how can I mount md0 array (md1 has been mounted without problem) in order to preserve existing data? One more thing, fdisk -l command gives the following result: Disk /dev/sdb: 750.1 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x660a6799 Device Boot Start End Blocks Id System /dev/sdb1 * 1 88217 708603021 83 Linux /dev/sdb2 88218 91201 23968980 5 Extended /dev/sdb5 88218 91201 23968948+ 82 Linux swap / Solaris Disk /dev/sdc: 750.1 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x0008f8ae Device Boot Start End Blocks Id System /dev/sdc1 1 88217 708603021 83 Linux /dev/sdc2 88218 91201 23968980 5 Extended /dev/sdc5 88218 91201 23968948+ 82 Linux swap / Solaris Disk /dev/sdd: 750.1 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x4be1abdb Device Boot Start End Blocks Id System Disk /dev/sde: 750.1 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xa4d5632e Device Boot Start End Blocks Id System Disk /dev/sdf: 750.1 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xdacb141c Device Boot Start End Blocks Id System Disk /dev/sdg: 750.1 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xdacb141c Device Boot Start End Blocks Id System Disk /dev/md1: 750.1 GB, 750156251136 bytes 2 heads, 4 sectors/track, 183143616 cylinders Units = cylinders of 8 * 512 = 4096 bytes Disk identifier: 0xdacb141c Device Boot Start End Blocks Id System Warning: ignoring extra data in partition table 5 Warning: ignoring extra data in partition table 5 Warning: ignoring extra data in partition table 5 Warning: invalid flag 0x7b6e of partition table 5 will be corrected by w(rite) Disk /dev/md0: 1500.3 GB, 1500312502272 bytes 255 heads, 63 sectors/track, 182402 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x660a6799 Device Boot Start End Blocks Id System /dev/md0p1 * 1 88217 708603021 83 Linux /dev/md0p2 88218 91201 23968980 5 Extended /dev/md0p5 ? 121767 155317 269488144 20 Unknown And one more thing. When using mdadm --examine command, here ise result: mdadm -v --examine --scan /dev/sdb /dev/sdc /dev/sdd /dev/sde /dev/sdf /dev/sd ARRAY /dev/md1 level=raid1 num-devices=2 UUID=9b592be7:c6a2052f:2e29483d:f114274d devices=/dev/sdf ARRAY /dev/md0 level=raid10 num-devices=4 UUID=1a02e789:c34377a1:2e29483d:f114274d devices=/dev/sdb,/dev/sdc,/dev/sdd,/dev/sde md0 has 3 devices which are active. Can someone instruct me how to solve this issue? If it is possible, I would like not to removing faulty HDD. Please advise

  Read the article

• Write TSQL, win a Kindle.

  - by Fatherjack

  So recently Red Gate launched sqlmonitormetrics.red-gate.com and showed the world how to embed your own scripts harmoniously in a third party tool to get the details that you want about your SQL Server performance. The site has a way to submit your own metrics and take a copy of the ones that other people have submitted to build a library of code to keep track of key metrics of your servers performance. There have been several submissions already but they have now launched a competition to provide an incentive for you to get creative and show us what you can do with a bit of TSQL and the SQL Monitor framework*. What’s it worth? Well, if you are one of the 3 winners then you get to choose either a Kindle Fire or $199. How do you win? Simply write the T-SQL for a SQL Monitor custom metric and the relevant description and introduction for it and submit it via  sqlmonitormetrics.red-gate.com before 14th Sept 2012 and then sit back and wait while the judges review your code and your aims in writing the metric. Who are the judges and how will they judge the metrics? There are two judges for this competition, Steve Jones (Microsoft SQL Server MVP, co-founder of SQLServerCentral.com, author, blogger etc) and Jonathan Allen (um, yeah, Steve has done all the good stuff, I’m here by good fortune). We will be looking to rate the metrics on each of 3 criteria: how the metric can help with performance tuning SQL Server. how having the metric running enables DBA’s to meet best practice. how interesting /original the idea for the metric is. Our combined decision will be final etc etc **  What happens to my metric? Any metrics submitted to the competition will be automatically entered into the site library and become available for sharing once the competition is over. You’ll get full credit for metrics you submit regardless of the competition results. You can enter as many metrics as you like. How long does it take? Honestly? Once you have the T-SQL sorted then so long as you can type your name and your email address you are done : http://sqlmonitormetrics.red-gate.com/share-a-metric/ What can I monitor? If you really really want a Kindle or $199 (and let’s face it, who doesn’t? ) and are momentarily stuck for inspiration, take a look at these example custom metrics that have been written by Stuart Ainsworth, Fabiano Amorim, TJay Belt, Louis Davidson, Grant Fritchey, Brad McGehee and me  to start the library off. There are some great pieces of TSQL in those metrics gathering important stats about how SQL Server is performing.   * – framework may not be the best word here but I was under pressure and couldnt think of a better one. If you prefer try ‘engine’, or ‘application’? I don’t know, pick something that makes sense to you. ** – for the full (legal) version of the rules check the details on sqlmonitormetrics.red-gate.com or send us an email if you want any point clarified. Disclaimer – Jonathan is a Friend of Red Gate and as such, whenever they are discussed, will have a generally positive disposition towards Red Gate tools. Other tools are often available and you should always try others before you come back and buy the Red Gate ones. All code in this blog is provided “as is” and no guarantee, warranty or accuracy is applicable or inferred, run the code on a test server and be sure to understand it before you run it on a server that means a lot to you or your manager.

  Read the article

• No root file system is defined error after installation

  - by LearnCode

  I installed ubuntu through Wubi and once i rebooted I get no root file system defined error. here's the output of the boot_info_script.Could anyone point me out where the error is. Boot Info Script 0.60 from 17 May 2011 ============================= Boot Info Summary: =============================== => Windows is installed in the MBR of /dev/sda. => Windows is installed in the MBR of /dev/sdb. sda1: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe /ntldr /ntdetect.com /wubildr /ubuntu/winboot/wubildr /wubildr.mbr /ubuntu/winboot/wubildr.mbr /ubuntu/disks/root.disk /ubuntu/disks/swap.disk sda1/Wubi: _____________________________________________________________________ File system: Boot sector type: Unknown Boot sector info: Mounting failed: mount: unknown filesystem type '' sda2: __________________________________________________________________________ File system: vfat Boot sector type: Unknown Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: /boot.ini /ntldr /NTDETECT.COM sdb1: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: ============================ Drive/Partition Info: ============================= Drive: sda _____________________________________________________________________ Disk /dev/sda: 160.0 GB, 160041885696 bytes 240 heads, 63 sectors/track, 20673 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 * 63 301,250,879 301,250,817 7 NTFS / exFAT / HPFS /dev/sda2 301,250,943 312,575,759 11,324,817 c W95 FAT32 (LBA) GUID Partition Table detected, but does not seem to be used. Partition Start Sector End Sector # of Sectors System /dev/sda1 323,465,741,313,502,988275,962,973,585-323,465,465,350,529,402 - /dev/sda2 242,728,591,638,290,720578,721,383,108,845,578335,992,791,470,554,859 - /dev/sda3 1,827,498,311,425,204,2562,091,935,274,843,009,907264,436,963,417,805,652 - /dev/sda4 579,711,218,081,401,3572,006,665,459,744,645,1521,426,954,241,663,243,796 - /dev/sda11 270,286,346,402,038,1183,786,543,326,404,525,9543,516,256,980,002,487,837 - /dev/sda12 4,179,681,002,230,769,6684,179,389,374,010,033,387-291,628,220,736,280 - /dev/sda13 232,556,480,979,456,1311,160,152,593,793,119,235927,596,112,813,663,105 - /dev/sda14 98,342,784,050,266,9183,691,264,578,843,725,1953,592,921,794,793,458,278 - /dev/sda15 2,307,845,219,957,882,4961,850,841,032,955,276,350-457,004,187,002,606,145 - /dev/sda16 512,592,046,878,946,497368,458,231,024,779,444-144,133,815,854,167,052 - /dev/sda17 2,504,135,232,870,384,3923,665,087,872,719,320,8291,160,952,639,848,936,438 - /dev/sda18 3,783,181,605,270,691,304122,034,509,624,708,942-3,661,147,095,645,982,361 - /dev/sda19 3,519,661,520,275,829,5122,376,243,094,723,723,587-1,143,418,425,552,105,924 - /dev/sda20 3,867,920,076,859,0744,494,691,111,933,625,1044,490,823,191,856,766,031 - /dev/sda21 1,500,144,061,909,253,7612,511,182,033,846,676,3401,011,037,971,937,422,580 - /dev/sda22 13,035,625,499,900,0062,360,168,613,941,394,9472,347,132,988,441,494,942 - /dev/sda23 4,228,978,682,068,599,48813,159,423,631,648,263-4,215,819,258,436,951,224 - /dev/sda24 3,695,955,742,872,046,9084,561,928,726,501,845,776865,972,983,629,798,869 - /dev/sda25 1,297,460,286,683,948,0461,444,350,486,339,417,957146,890,199,655,469,912 - /dev/sda26 1,228,858,248,533,131,831 0-1,228,858,248,533,131,830 - /dev/sda121 3,189,184,846,146,487,1461,849,820,258,006,914,852-1,339,364,588,139,572,293 - /dev/sda122 1,226,215,547,991,800,578389,781,518,734,546,300-836,434,029,257,254,277 - /dev/sda123 3,851,660,168,574,583,4654,046,215,657,583,031,556194,555,489,008,448,092 - /dev/sda124 1,197,460,980,174,153,341699,103,965,005,093,246-498,357,015,169,060,094 - Drive: sdb _____________________________________________________________________ Disk /dev/sdb: 750.2 GB, 750153367552 bytes 255 heads, 63 sectors/track, 91200 cylinders, total 1465143296 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sdb1 2,048 1,465,143,295 1,465,141,248 7 NTFS / exFAT / HPFS "blkid" output: ________________________________________________________________ Device UUID TYPE LABEL /dev/loop0 iso9660 Ubuntu 11.04 amd64 /dev/loop1 squashfs /dev/sda1 E814B55B14B52E06 ntfs /dev/sda2 01CD-023B vfat HP_RECOVERY /dev/sdb1 7836F22A36F1E8D0 ntfs Elements ================================ Mount points: ================================= Device Mount_Point Type Options /dev/loop0 /cdrom iso9660 (ro,noatime) /dev/loop1 /rofs squashfs (ro,noatime) /dev/sdb1 /mnt fuseblk (rw,nosuid,nodev,allow_other,blksize=4096) ================================ sda2/boot.ini: ================================ -------------------------------------------------------------------------------- [boot loader] timeout=0 default=C:\CMDCONS\BOOTSECT.DAT [operating systems] multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /fastdetect C:\CMDCONS\BOOTSECT.DAT="Microsoft Windows Recovery Console" /cmdcons -------------------------------------------------------------------------------- ======================== Unknown MBRs/Boot Sectors/etc: ======================== Unknown GPT Partiton Type c104043000e9b9040dff24b580010100 Unknown GPT Partiton Type 46313020746f20737461727420746865 Unknown GPT Partiton Type 65727920706172746974696f6e207761 Unknown GPT Partiton Type 727920706172746974696f6e0d0a0000 Unknown GPT Partiton Type 000f84e5f7668b162404e82804744066 Unknown GPT Partiton Type ce01e8dc038bfe66391624047505e8d9 Unknown GPT Partiton Type 0345086603f0e881030bd2740333d240 Unknown GPT Partiton Type bece01e8db0287fec645041266895508 Unknown GPT Partiton Type 01f60634010175078b363b01e854f5e8 Unknown GPT Partiton Type 313825740ffec03865107408fec03824 Unknown GPT Partiton Type 02f60634014074088bfdbece01e85101 Unknown GPT Partiton Type 263401f9e894f30f858ef4e8e201e8ec Unknown GPT Partiton Type f7e960f35245434f5645525966606633 Unknown GPT Partiton Type 660faf1e00106603dac3668b0e001066 Unknown GPT Partiton Type 8bfd386d04740583c710e2f6c36660c6 Unknown GPT Partiton Type 04ebf132c0b91000f3aac3bf0c04ebf3 Unknown GPT Partiton Type 02662bc1660fb71e0e02662bc366031e Unknown GPT Partiton Type f4b40ebb0700b901003c08751381ff25 Unknown GPT Partiton Type 534f465448494e4b90653f62011b0100 Unknown GPT Partiton Type 0b050900027777772e68702e636f6d00 Unknown GPT Partiton Type d441a0f5030003000ecb744a08bb3746 Unknown GPT Partiton Type f8579a116b4a7aa931cde97a4b9b5c09 Unknown GPT Partiton Type 7229990415b77c0a1970e7e824237a3a Unknown GPT Partiton Type afb6e34d6b4bd8c7c0eada19a9786cc3 Unknown BootLoader on sda1/Wubi 00000000 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 |0000000000000000| * 00000200 Unknown BootLoader on sda2 00000000 e9 a7 00 52 45 43 4f 56 45 52 59 00 02 08 20 00 |...RECOVERY... .| 00000010 02 00 00 00 00 f8 00 00 3f 00 f0 00 7f b9 f4 11 |........?.......| 00000020 8c cd ac 00 1e 2b 00 00 00 00 00 00 02 00 00 00 |.....+..........| 00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 00000040 80 00 29 3b 02 cd 01 20 20 20 20 20 20 20 20 20 |..);... | 00000050 20 20 46 41 54 33 32 20 20 20 8b d0 c1 e2 02 80 | FAT32 ......| 00000060 e6 01 66 c1 e8 07 66 3b 46 f8 74 2a 66 89 46 f8 |..f...f;F.t*f.F.| 00000070 66 03 46 f4 66 0f b6 5e 28 80 e3 0f 74 0f 3a 5e |f.F.f..^(...t.:^| 00000080 10 0f 83 90 00 66 0f af 5e 24 66 03 c3 bb e0 07 |.....f..^$f.....| 00000090 b9 01 00 e8 cf 00 8b da 66 8b 87 00 7e 66 25 ff |........f...~f%.| 000000a0 ff ff 0f 66 3d f8 ff ff 0f c3 33 c9 8e d9 8e c1 |...f=.....3.....| 000000b0 8e d1 66 bc f4 7b 00 00 bd 00 7c 66 0f b6 46 10 |..f..{....|f..F.| 000000c0 66 f7 66 24 66 0f b7 56 0e 66 03 56 1c 66 89 56 |f.f$f..V.f.V.f.V| 000000d0 f4 66 03 c2 66 89 46 fc 66 c7 46 f8 ff ff ff ff |.f..f.F.f.F.....| 000000e0 66 8b 46 2c 66 50 e8 af 00 bb 70 00 b9 01 00 e8 |f.F,fP....p.....| 000000f0 73 00 bf 00 07 b1 0b be a9 7d f3 a6 74 2a 03 f9 |s........}..t*..| 00000100 83 c7 15 81 ff 00 09 72 ec 66 40 4a 75 db 66 58 |[email protected]| 00000110 e8 47 ff 72 cf be b4 7d ac 84 c0 74 09 b4 0e bb |.G.r...}...t....| 00000120 07 00 cd 10 eb f2 cd 19 66 58 ff 75 09 ff 75 0f |........fX.u..u.| 00000130 66 58 bb 00 20 66 83 f8 02 72 da 66 3d f8 ff ff |fX.. f...r.f=...| 00000140 0f 73 d2 66 50 e8 50 00 0f b6 4e 0d e8 16 00 c1 |.s.fP.P...N.....| 00000150 e1 05 03 d9 66 58 53 e8 00 ff 5b 72 d8 8a 56 40 |....fXS...[r..V@| 00000160 ea 00 00 00 20 66 60 66 6a 00 66 50 53 6a 00 66 |.... f`fj.fPSj.f| 00000170 68 10 00 01 00 8b f4 b8 00 42 8a 56 40 cd 13 be |h........B.V@...| 00000180 c7 7d 72 94 67 83 44 24 06 20 66 67 ff 44 24 08 |.}r.g.D$. fg.D$.| 00000190 e2 e3 83 c4 10 66 61 c3 66 48 66 48 66 0f b6 56 |.....fa.fHfHf..V| 000001a0 0d 66 f7 e2 66 03 46 fc c3 4e 54 4c 44 52 20 20 |.f..f.F..NTLDR | 000001b0 20 20 20 20 0d 0a 4e 6f 20 53 79 73 74 65 6d 20 | ..No System | 000001c0 44 69 73 6b 20 6f 72 0d 0a 44 69 73 6b 20 49 2f |Disk or..Disk I/| 000001d0 4f 20 65 72 72 6f 72 0d 0a 50 72 65 73 73 20 61 |O error..Press a| 000001e0 20 6b 65 79 20 74 6f 20 72 65 73 74 61 72 74 0d | key to restart.| 000001f0 0a 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.| 00000200 =============================== StdErr Messages: =============================== umount: /isodevice: device is busy. (In some cases useful info about processes that use the device is found by lsof(8) or fuser(1))

  Read the article

• Terminal error messages: bash: /dev/cgroup/cpu/user/2823/tasks: No such file or directory

  - by sasaenator

  This is what I get when I start up the terminal: bash: /dev/cgroup/cpu/user/2823/tasks: No such file or directory bash: /dev/cgroup/cpu/user/2823/notify_on_release: No such file or directory bash: /dev/cgroup/cpu/user/2823/tasks: No such file or directory bash: /dev/cgroup/cpu/user/2823/notify_on_release: No such file or directory sasa@sasa:~$*** I reinstalled 10.10 yesterday because of other problems, I didn't have this error message before. I have a separate /home partition, and new installation picked up almost all of the old settings, also those which I don't like, but it looks like that is not a problem or maybe I am wrong? Wouldn't ask if I knew! :) I'll be glad to post more info if someone needs it!

  Read the article

• Microsoft Dev Centre accounts

  - by Phil Murray

  Looks like Microsoft is offering a special offer of 95% of the yearly subscription for the Phone Dev Centre (I didn't say anything about desperate). What I was wondering is do you need a seperate account to publish to the Windows Phone app centre and the Windows App Centre? Also I heard some horror stories about the time it takes to get application published on the Windows phone marketplace, does anyone have any experience with this? Windows Phone Dev Centre Windows App Dev Centre

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >