Search Results

Search found 5878 results on 236 pages for 'sim card'.

Page 5/236 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • Bridging with aliased Ethernet card for Virtualizing with single Ethernet card

    - by user113505
    We are having a server with good CPU and RAM,so we are planning to do XEN virtualization on ubuntu 12.04 server to handle high traffic. The plan is to keep the host machine only to manage VMs(no NAT ing). A New public IP will be assigned to that VM,For that i think we need a Bridge to external network(Since my Machine has only single ethernet card aliased with 4 different Pub IP's) Is it possible to create a bridge using aliased IP single ethernet card aliased to 4 pub IPs Do we need an additional Ethernet card to do Bridging.Only have ssh access to the machine. Any suggestions will be appreciated.

    Read the article

  • How much does it wear an SD card to be frequently removed/reinserted?

    - by jtbandes
    My digital camera (a Sony a55) stores photos on an SD card. When I want to transfer these to my computer (a mid-2010 MacBook Pro), I have two options: use the USB cable to connect the camera to the computer, or use the computer's built-in SD card reader. The camera's SD card slot is the standard click-in, click-out (spring-loaded) mechanism. My laptop has a simple slot into which the card slides with a little more resistance than the former (the card slides only about halfway in so it can be easily removed). I notice that the card's contacts now have some shiny marks from one or both of these card slots: Does this type of wear threaten to significantly damage the card? Should I avoid switching the card between slots frequently, to extend its lifetime?

    Read the article

  • micro-SD card initialization using SPI interface

    - by Ron
    I'm using a micro-SD card in an embedded design. The card is connected to a microcontroller using the SPI interface. It worked fine for all cards I've used before, but now my new card will not initialize. The card is a Transcend 2GB micro-SD card (TS2GUSD). After sending the initial clock train to switch to SPI mode I do the following: 1) CMD0 (Argument 0, CRC 0x95) - Response 0x01 - OK 2) CMD8 (Argument 0x000001AA, CRC 0x87) - Response 0x01 0x000001AA - Means it's SDC V2+ card, the Voltage range 2.7V~3.6V is supported - OK Then I should send the ACMD41 command, but when sending the CMD55 (argument 0, CRC 0) that must precede CMD41, I get response 0x05 - Illegal Command. I've also tried to send CMD1 (for MMC cards), but it gives a similar Illegal Command response. The code works fine with my Sandisk 2GB micro-SD card. Does anyone have any idea? Thanks, -Ron-

    Read the article

  • Creating a standard card game (iPhone SDK)

    - by Chris
    I am trying to create a card game with a standard deck of cards. I need to be able to create a new card on screen every time someone draws a card from the deck and then be able to continuously move it throughout gameplay. I have image files for every card available in the game. I have tried creating a card object which held a UIImageView for the card along with some other basic data but I had trouble referring back to that card to move it again after the first touch. Was this the right way to do this?

    Read the article

  • Change Laptop Wireless Card?

    - by Craig
    I have just bought a new Samsung RV511 Laptop (the i5 Version). Anyway it comes installed with a Broadcom Wifi Card, I have a Super Atheros Mini Wifi Card that I would like to swap for the Broadcom one. I use Atheros for security auditing purposes in Linux that the Broadcom one is not good for. Trouble is I have never got to the barebones of a laptop, although I am a Custom PC Builder, laptops i generally have no concern for. Take a look at this picture, I took one back panel off to reveal some of the components: I believe the Wireless Card is where I marked the arrow pointing too. That little white square thing appears to be a sticker of the Wifi card, it says WLAN. How can I access it to swap it with my Atheros one. Do I need to remove all the outermost screws? There are screws located to the right of where I scribbled in Yellow and next to the HDD, do I just remove those? I dont want to destroy the machine, only just got it today. Appreciate some help thanks.

    Read the article

  • Restoring MBR, partition table, and boot sector of memory card without data loss ("USBC")

    - by Synetech
    Abstract I have a FAT32 memory card that when inserted into a computer causes Windows to prompt to format it. The card is definitely not supposed to be blank and has a bunch of files on it. Symptoms Using a hex-editor/disk-viewer, I examined the card and found that several sectors/clusters have been overwritten with something that has a signature of USBC at the start of the sector. Specifically, the master boot record (and partition table) is gone (hence Windows thinking the card is blank and needing to be formatted), as are the boot sectors (they have the USBC signature and a volume label of NO NAME and partition type of FAT32). Fortunately, it looks like both copies of the FAT are almost entirely intact (a few FAT entries at the start of a cluster here and there seem to be overwritten by USBC). The root directory is also nearly intact—I can see the volume label entry and subdirectory listings, but one sector is overwritten. (There are no more instances of USBC after the last one in the FAT2.) Hypothesis These observations seem to indicate some sort of virus that erases a few key filesystem structures, and then overwrites a few extra sectors here and there. Googling it seems to corroborate the idea of a virus, except that others report a file called USBC which does not apply here, and in fact, could not be possible since there is no filesystem to even see files. I cannot find any information about a virus with these symptoms, nor a removal tool. (I can't help but wonder if it is actually due to an autorun virus prevention tool.) Question I can likely fix the FAT corruption since they are mostly contiguous chains and maybe even the lost sector of the root directory, but does anyone know of a convenient way to restore or (re)create the MBR/partition table and boot sectors (without formatting or overwriting the data)?

    Read the article

  • authorize.net SIM PCI compliance

    - by David
    Does anyone know if authorize.net's SIM rids you of having to be PCI compliant? The payment form is hosted on authorize.net's site and they're processing the payment. I know you can do a relay response which basically puts some of the transaction details in a url that goes back to your website(to display a receipt). I'm not sure what all information gets put into the url though. I'm wondering if that makes you have to become PCI compliant?

    Read the article

  • what appropriate "Allocation Unit Size" for an exFAT SD card with ReadyBoost

    - by Revolter
    I've brought an 4GB SD card and I'm dedicating it for use by ReadyBoost (on Windows7) Im looking to get the most profit on performance, so i've formatted it with exFAT (as recommended by Microsoft) but I have some doubts to define what best .Allocation Unit Size* I should choose. Since I can't get how ReadyBoost/SD card exactly read/seek the data, can someone tell what make choosing an Allocation Unit Size in favor of another for this scheme ? Apparently, ReadyBoost is allocating all the free space in SD card as one huge file, so a big Allocation Unit Size is advised for fastest reading time. I'm not confusing with ordinary HDD's ?

    Read the article

  • Three displays, one video card and no eyefinity mode

    - by José F. Romaniello
    I am looking for a video card to run three monitors, it could be hdmi, dvi or vga. I want the three monitors to show an extended desktop but as three different desktops with maybe different resolutions, so when i maximize something it should be maximized only in one monitor. The information seems confusing, I think eyefinity tricks the OS to make it looks like one big display. I am sure I dont want this. So my question(s) is, is there a video card in the market that support 3 displays without eyefinity? Or can I use an eyefinity enabled card ( with one active display port) to run three monitors and disable eyefinity from the driver settings or something?

    Read the article

  • Share a USB sound card over a network/bluetooth (Mac & PC)

    - by AlexW
    I've been wondering how I can stream audio to an external Edirol USB sound card, wirelessly, on both Mac and PC. I'm not looking for high quality transmission, just to play mp3s from my Mac laptop to a USB sound card that is attached to two very nice balanced studio reference monitors. Is there any way I can firstly power the sound card box, and secondly, provide with an audio stream along it's USB input. I've looked at the Belkin USB hub, and I have a Time Capsule with the AirPort interface inside. These things seem to do vaguely what I want but when it comes to audio, the specifications are less clear. Any suggestions very welcome.

    Read the article

  • Mac keeps switching to second graphics card

    - by 1.21 gigawatts
    I have a MacBook Pro and whenever I enter certain apps (video camera app or Photoshop for example, the graphics card switched. I didn't know this was going on at first; just that the screen kept changing colors as I opened or closed different software. Later someone told me that the software was causing the OSX to switch graphics cards. It's annoying. How do I keep one graphics card (the better one) enabled all the time? I don't care about power consumption because it is plugged in all the time (though I'm curious how much difference it makes). I just want one graphics card enabled.

    Read the article

  • Installing Linux from External Card Reader

    - by Subhamoy Sengupta
    I have this problem. I was experimenting if I could use a memory card (SDHC) as an USB drive for all intents and purposes, and when I put the card in an USB card reader, I can use it just like regular USB stick and it also shows up in the BBS popup menu as an USB stick. When I tried to create an installation media out of it like this: sudo dd if=/path/to/image of=/dev/sdb And tried to boot from it, simply nothing happened. Cursor blinked a couple times, and jumped to the GRUB of my pre-existing GNU/Linux installation. What am I missing here? Is this not doable? I tried this with Xubuntu 12.04 and ArchLinux, by the way. I have also tried UNetBootIn instead of dd. Nothing happened differently.

    Read the article

  • MacPro 1,1 video's card

    - by alexus
    I just bought a Mac Pro 1,1 from my coworkers and I'm looking to upgrade video card as the one inside is very noisy. What are my options? Basically I'm not looking to spend a lot of money, in fact i'd rather to spend as little as possible and get low end or mid range card, I'm not really playing games all that much so pretty much anything will do, I'd prefer 2xx series though. Current Mac Pro sells w/ GT120, Apple sells upgrade kit for $149 (which is okay, I just not sure if I'll be able to use this card on such an old Mac Pro)

    Read the article

  • Updating ATI HD 5970 Graphics card - version errors?

    - by user55406
    I'm having an issue...My system specs is: Intel i7 960 6GM Corair XMS RAM ATI HD5970 graphics card Intel dx58so motherboard Cooler Master HAF 922 case 1.5TB Seagate hard drive Windows Vista x86 (32-bit). Here is my issue: when I go to AMD/ATI website to update my graphics card - it doesn't. when I type DxDiag and then click on display it tell me my version is 8.17.0 and its on 10.10.0 for the latest version. How can I get 8.17.0 too 10.10.0? I figure it would have done that after I updated the driver for my graphics card. Thanks.

    Read the article

  • Monitor has yellow tint when used with the graphics card

    - by artknish
    I have an nVIDIA graphics card when used produces an yellow tint on my monitor's display. I tried with another monitor and it had the same issue. I then switched back to my motherboard's inbuilt graphics output (not sure what the technical term is), and the display seems fine, except I can't get the optimal resolution of 1440x900 to work. So is my graphics card's life over? Or can I get it repaired? Any self remedies without calling a hardware guy? Should I try with a DVI cable? I've been using the VGA cable from my graphics card to the monitor so far. Thanks for your suggestions!

    Read the article

  • Asus F5N laptop built-in card reader driver problem

    - by Felix Dombek
    I have an Asus F5N X50N-AP011C. I have manually installed Windows 7 x64 on it, replacing the original Windows Vista. It also automatically installed a card reader driver, but it can no longer read xD cards. The driver shows in the device manager as "Generic- xD/SDMMC/MS/Pro USB device" (under "drives" - and a drive is also shown in Windows Explorer). The same card reader once used to work with xD cards. I also tried to manually install drivers from this website: http://www.station-drivers.com/page/realtek.htm - the RTS 5158 but it didn't work (it shows as USB device in device manager, but not as a drive in Windows Explorer). Does anyone know what card reader my model has built-in? (I think it's the 5158 but I don't know how to verify that - there's also no hint in the System Information tool, only the driver name is listed under "drives") how it is connected internally? if there is a better Windows 7 x64 driver?

    Read the article

  • How can I make my PCI-E graphics card visible to Ubuntu when the motherboard has integrated graphics

    - by Norman Ramsey
    I have a Gigabyte GA-MA74GM-S2 motherboard with integrated graphics that shows up on lspci as an ATI Radeon 2100. I also bought a PCI-Express Nvidia graphics card so I could use the VDPAU feature on Linux (plays H.264 in hardware). The BIOS has three settings about which display to initialize first: Integrated graphics PCI graphics PCI-Express graphics (PEG) I set the BIOS on PEG, but I cannot get anything, not even a splash screen or POST messages, to emerge from the PCI-Express graphics card. (I'm using a DVI connector; the card also has an HDMI output.) I cannot get the kernel lspci to see the graphics card; the only VGA controller it acknowledges is the integrated one. Running dmidecode acknowledges the existence of an x16 PCI Express slot, and it says Current usage: Unknown There is an additional BIOS setting called "Internal Graphics Mode" which is normally set to "Auto" which means it is supposed to prefer a PCI Express VGA card. I set it to "Disabled" which now means I'm getting no output at all. I will soon be learning how to do a BIOS reset! Other information: The PCI-E card is a MSI N210-MD512H GeForce 210. This is a fanless card. Although there are no fans to see turning, the heat sink on the PCI-E card is definitely getting hot, so the card is getting some sort of power. It gets all its power from the PCI-E slot; there is no external power connector. The BIOS is an AMI Award BIOS. My question: how can I make the PCI Express graphics card visible to Ubuntu?

    Read the article

  • Lag spikes at full CPU usage, lagy mouse, maybe video card

    - by Roberts
    My PC specs: Motherboard Name - Gigabyte GA-945PL-S3 CPU Type - DualCore Intel Core 2 Duo E4300, 1800 MHz (9 x 200) OS - Microsoft Windows 7 Ultimate OS Kernel Type - 32-bit OS Version - 6.1.7601 I bougth a new video card one month ago. GeForce 210. I didn't have any problems. I wanted to overclock it, in other words: "Play with it". So I installed Gigabyte EasyBoost from CD and overclocked the GPU 590 + 110 mhz, memory to max to 960mhz from 800mhz. Benchmarks showed a little bit bigger score. Then I overclocked shader clock from 1405 to [..] (don't remeber really). So I was playing Modern Warfare 2 when off sudden computer froze when I wanted to select team, I was afk before that. I had to reset CMOS. After that I had problems with Skype: unread messages and no sound. Then I figured it out that when ever I open EasyBoost - Skype starts to glitch again. Now I use EVGA Precission X. Now after a month, I cleaned computer and closed the case, it was open all the time. I started to overclock GPU clock only (just a bit) because there was no problems that would stop me. So sometimes on heavy CPU load graphics starts to lag. Dragging a window is painful to watch too. Sometimes the screen freezes for 5 to 10 seconds (I can see that hard disk activity is maximal). You may say that CPU fault it is, isn't it? But sometimes lag spikes starts randomly when CPU load is at maximum. All 3 benchmark softwares (PerformanceTest, NovaBench and MSI Kombustor) shows that performance of my video card has dropped about 25%. BUT! CPU score is lower too. I ignored these problems but when I refreshed Windows Experience Index I was shocked. Month before (in latvian language but not so hard to understand): Now 01.04.2012 (upgraded RAM): This happened when I tried to capture Minecraft with Fraps on underclocked GPU to 580mhz (def: 590mhz): All drivers are up to date. Average CPU temperature from 55°C to 75°C (at 70°C sometimes starts these lag spikes). Video card's tempratures are from 45°C to 60°C (very hard to reach 60°C). So my hope is that the video card is fine, cause this card is very new and I want to upgrade CPU anyways. Aplogies for my mistakes in vocabulary (I am trying to type this as fast I can). Update 02.04.2012 - 7:21 Forgot one thing, my hard disk is extrimly slow and I will upgrade it this week or next week so I will be installing same OS again. I am multi-tasker but I can't do much because of 1.8 GHz CPU and slow hard drive (Model ID - WDC WD800JD-60JRC0). The Windows Experience Index is back to normal. Actually "Spelu grafika" (Gaming graphics) are higher than month ago. During this test mouse was very lagy, but month ago there weren't any problems. WHY!?

    Read the article

  • Storing credit card details

    - by Andrew
    I have a business requirement that forces me to store a customer's full credit card details (number, name, expiry date, CVV2) for a short period of time. Rationale: If a customer calls to order a product and their credit card is declined on the spot you are likely to lose the sale. If you take their details, thank them for the transaction and then find that the card is declined, you can phone them back and they are more likely to find another way of paying for the product. If the credit card is accepted you clear the details from the order. I cannot change this. The existing system stores the credit card details in clear text, and in the new system I am building to replace this I am clearly not going to replicate this! My question, then, is how I can securely store a credit card for a short period of time. I obviously want some kind of encryption, but what's the best way to do this? Environment: C#, WinForms, SQL-Server.

    Read the article

  • How is 'processing credit card data' defined (PCI)?

    - by Chris
    If i have a web application and i receive credit card data transmitted via a POST request by a web browser over HTTPS and instantly open a socket (SSL) to a remote PCI compilant card processor to forward the data and wait for a response, am i allowed to do that? or is this receiving the data with my application and forwarding it already subject of "processing credit card data"? if i create an iframe that is displayed in a client browser to enter cc data and this iframe posts the data via HTTPS to remote card processor (directly!) is this already a case of processing credit card data? even if my application code 'doesnt touch' the entered data with any event handlers? i'm interested in the definition "credit card data processing". when does it start to be a cc data processing application? can somebody maybe point me to that section in PCI-DSS standard that clearly defines when you start to 'be a processing application'? Thanks,

    Read the article

  • Gigabyte Onboard graphics card heating up and then crashing

    - by this is text comes from a db
    5 minutes after I turn on my PC the onboard graphics card is usually over 80° celsius and then crashes (random colors on screen, only way to get out is to just plug out the pc). I haven't installed any new drivers or added/changed hardware recently Everything went fine until yesterday What should I do next? Do I have to buy a new mainboard right now? There is no fan on the onboard graphics card, only a heatsink.

    Read the article

  • Sound Card Problem?

    - by Paul
    I bought a new sound card because my built in sound card did not function. When i open youtube, media player or anything that can create a sound my computer will hang up and sometimes when i start my computer it will hang when the windows xp sound will activate.. Help me pls ASAP

    Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >