Search Results

Search found 132 results on 6 pages for 'sumit pal'.

Page 5/6 | < Previous Page | 1 2 3 4 5 6  | Next Page >

• Problems with capture TV card

  - by user8270

  Hi, I have a TV card that I have not managed to install with Ubuntu 10.10 i386. I have tried various topics in various forums and I could not install it. I hope you can help me to install it thank you. lspci 01:07.0 Multimedia controller: Philips Semiconductors SAA7130 Video Broadcast Decoder (rev 01) dmesg [10299.516344] saa7134 ALSA driver for DMA sound unloaded [11385.340661] Linux video capture interface: v2.00 [11385.384278] saa7130/34: v4l2 driver version 0.2.16 loaded [11385.384390] saa7130[0]: found at 0000:01:07.0, rev: 1, irq: 17, latency: 32, mmio: 0x0 [11385.384403] saa7130[0]: subsystem: 1131:0000, board: LifeView/Typhoon FlyVIDEO2000 [card=3,insmod option] [11385.384412] saa7130[0]: can't get MMIO memory @ 0x0 [11385.384431] saa7134: probe of 0000:01:07.0 failed with error -16 [11385.401174] saa7134 ALSA driver for DMA sound loaded [11385.401182] saa7134 ALSA: no saa7134 cards found [11477.797019] tvtime[12534]: segfault at 6b0 ip 0804cf64 sp bf928a4c error 4 in tvtime[8048000+76000] [11626.141821] tvtime[12549]: segfault at 6b0 ip 0804cf64 sp bfec357c error 4 in tvtime[8048000+76000] [12218.120632] saa7134 ALSA driver for DMA sound unloaded [12464.993061] Linux video capture interface: v2.00 [12465.028285] saa7130/34: v4l2 driver version 0.2.16 loaded [12465.028392] saa7130[0]: found at 0000:01:07.0, rev: 1, irq: 17, latency: 32, mmio: 0x0 [12465.028404] saa7134: <rant> [12465.028406] saa7134: Congratulations! Your TV card vendor saved a few [12465.028408] saa7134: cents for a eeprom, thus your pci board has no [12465.028411] saa7134: subsystem ID and I can't identify it automatically [12465.028414] saa7134: </rant> [12465.028416] saa7134: I feel better now. Ok, here are the good news: [12465.028418] saa7134: You can use the card=<nr> insmod option to specify [12465.028421] saa7134: which board do you have. The list: [12465.028428] saa7134: card=0 -> UNKNOWN/GENERIC [12465.028435] saa7134: card=1 -> Proteus Pro [philips reference design] 1131:2001 1131:2001 [12465.028447] saa7134: card=2 -> LifeView FlyVIDEO3000 5168:0138 4e42:0138 [12465.028457] saa7134: card=3 -> LifeView/Typhoon FlyVIDEO2000 5168:0138 4e42:0138 [12465.028467] saa7134: card=4 -> EMPRESS 1131:6752 [12465.028475] saa7134: card=5 -> SKNet Monster TV 1131:4e85 [12465.028484] saa7134: card=6 -> Tevion MD 9717 [12465.028491] saa7134: card=7 -> KNC One TV-Station RDS / Typhoon TV Tune 1131:fe01 1894:fe01 [12465.028501] saa7134: card=8 -> Terratec Cinergy 400 TV 153b:1142 [12465.028510] saa7134: card=9 -> Medion 5044 [12465.028517] saa7134: card=10 -> Kworld/KuroutoShikou SAA7130-TVPCI [12465.028523] saa7134: card=11 -> Terratec Cinergy 600 TV 153b:1143 [12465.028532] saa7134: card=12 -> Medion 7134 16be:0003 16be:5000 [12465.028542] saa7134: card=13 -> Typhoon TV+Radio 90031 [12465.028548] saa7134: card=14 -> ELSA EX-VISION 300TV 1048:226b [12465.028557] saa7134: card=15 -> ELSA EX-VISION 500TV 1048:226a [12465.028565] saa7134: card=16 -> ASUS TV-FM 7134 1043:4842 1043:4830 1043:4840 [12465.028576] saa7134: card=17 -> AOPEN VA1000 POWER 1131:7133 [12465.028585] saa7134: card=18 -> BMK MPEX No Tuner [12465.028592] saa7134: card=19 -> Compro VideoMate TV 185b:c100 [12465.028600] saa7134: card=20 -> Matrox CronosPlus 102b:48d0 [12465.028608] saa7134: card=21 -> 10MOONS PCI TV CAPTURE CARD 1131:2001 [12465.028617] saa7134: card=22 -> AverMedia M156 / Medion 2819 1461:a70b [12465.028625] saa7134: card=23 -> BMK MPEX Tuner [12465.028632] saa7134: card=24 -> KNC One TV-Station DVR 1894:a006 [12465.028640] saa7134: card=25 -> ASUS TV-FM 7133 1043:4843 [12465.028648] saa7134: card=26 -> Pinnacle PCTV Stereo (saa7134) 11bd:002b [12465.028657] saa7134: card=27 -> Manli MuchTV M-TV002 [12465.028663] saa7134: card=28 -> Manli MuchTV M-TV001 [12465.028670] saa7134: card=29 -> Nagase Sangyo TransGear 3000TV 1461:050c [12465.028679] saa7134: card=30 -> Elitegroup ECS TVP3XP FM1216 Tuner Card( 1019:4cb4 [12465.028687] saa7134: card=31 -> Elitegroup ECS TVP3XP FM1236 Tuner Card 1019:4cb5 [12465.028695] saa7134: card=32 -> AVACS SmartTV [12465.028702] saa7134: card=33 -> AVerMedia DVD EZMaker 1461:10ff [12465.028710] saa7134: card=34 -> Noval Prime TV 7133 [12465.028717] saa7134: card=35 -> AverMedia AverTV Studio 305 1461:2115 [12465.028725] saa7134: card=36 -> UPMOST PURPLE TV 12ab:0800 [12465.028734] saa7134: card=37 -> Items MuchTV Plus / IT-005 [12465.028740] saa7134: card=38 -> Terratec Cinergy 200 TV 153b:1152 [12465.028749] saa7134: card=39 -> LifeView FlyTV Platinum Mini 5168:0212 4e42:0212 5169:1502 [12465.028760] saa7134: card=40 -> Compro VideoMate TV PVR/FM 185b:c100 [12465.028768] saa7134: card=41 -> Compro VideoMate TV Gold+ 185b:c100 [12465.028776] saa7134: card=42 -> Sabrent SBT-TVFM (saa7130) [12465.028783] saa7134: card=43 -> :Zolid Xpert TV7134 [12465.028790] saa7134: card=44 -> Empire PCI TV-Radio LE [12465.028796] saa7134: card=45 -> Avermedia AVerTV Studio 307 1461:9715 [12465.028805] saa7134: card=46 -> AVerMedia Cardbus TV/Radio (E500) 1461:d6ee [12465.028813] saa7134: card=47 -> Terratec Cinergy 400 mobile 153b:1162 [12465.028821] saa7134: card=48 -> Terratec Cinergy 600 TV MK3 153b:1158 [12465.028830] saa7134: card=49 -> Compro VideoMate Gold+ Pal 185b:c200 [12465.028838] saa7134: card=50 -> Pinnacle PCTV 300i DVB-T + PAL 11bd:002d [12465.028847] saa7134: card=51 -> ProVideo PV952 1540:9524 [12465.028855] saa7134: card=52 -> AverMedia AverTV/305 1461:2108 [12465.028863] saa7134: card=53 -> ASUS TV-FM 7135 1043:4845 [12465.028871] saa7134: card=54 -> LifeView FlyTV Platinum FM / Gold 5168:0214 5168:5214 1489:0214 5168:0304 [12465.028884] saa7134: card=55 -> LifeView FlyDVB-T DUO / MSI TV@nywhere D 5168:0306 4e42:0306 [12465.028894] saa7134: card=56 -> Avermedia AVerTV 307 1461:a70a [12465.028903] saa7134: card=57 -> Avermedia AVerTV GO 007 FM 1461:f31f [12465.028911] saa7134: card=58 -> ADS Tech Instant TV (saa7135) 1421:0350 1421:0351 1421:0370 1421:1370 [12465.028924] saa7134: card=59 -> Kworld/Tevion V-Stream Xpert TV PVR7134 [12465.028931] saa7134: card=60 -> LifeView/Typhoon/Genius FlyDVB-T Duo Car 5168:0502 4e42:0502 1489:0502 [12465.028942] saa7134: card=61 -> Philips TOUGH DVB-T reference design 1131:2004 [12465.028951] saa7134: card=62 -> Compro VideoMate TV Gold+II [12465.028958] saa7134: card=63 -> Kworld Xpert TV PVR7134 [12465.028964] saa7134: card=64 -> FlyTV mini Asus Digimatrix 1043:0210 [12465.028973] saa7134: card=65 -> V-Stream Studio TV Terminator [12465.028980] saa7134: card=66 -> Yuan TUN-900 (saa7135) [12465.028986] saa7134: card=67 -> Beholder BeholdTV 409 FM 0000:4091 [12465.028995] saa7134: card=68 -> GoTView 7135 PCI 5456:7135 [12465.029003] saa7134: card=69 -> Philips EUROPA V3 reference design 1131:2004 [12465.029011] saa7134: card=70 -> Compro Videomate DVB-T300 185b:c900 [12465.029020] saa7134: card=71 -> Compro Videomate DVB-T200 185b:c901 [12465.029028] saa7134: card=72 -> RTD Embedded Technologies VFG7350 1435:7350 [12465.029036] saa7134: card=73 -> RTD Embedded Technologies VFG7330 1435:7330 [12465.029045] saa7134: card=74 -> LifeView FlyTV Platinum Mini2 14c0:1212 [12465.029053] saa7134: card=75 -> AVerMedia AVerTVHD MCE A180 1461:1044 [12465.029062] saa7134: card=76 -> SKNet MonsterTV Mobile 1131:4ee9 [12465.029070] saa7134: card=77 -> Pinnacle PCTV 40i/50i/110i (saa7133) 11bd:002e [12465.029078] saa7134: card=78 -> ASUSTeK P7131 Dual 1043:4862 [12465.029087] saa7134: card=79 -> Sedna/MuchTV PC TV Cardbus TV/Radio (ITO [12465.029094] saa7134: card=80 -> ASUS Digimatrix TV 1043:0210 [12465.029102] saa7134: card=81 -> Philips Tiger reference design 1131:2018 [12465.029110] saa7134: card=82 -> MSI TV@Anywhere plus 1462:6231 1462:8624 [12465.029120] saa7134: card=83 -> Terratec Cinergy 250 PCI TV 153b:1160 [12465.029128] saa7134: card=84 -> LifeView FlyDVB Trio 5168:0319 [12465.029137] saa7134: card=85 -> AverTV DVB-T 777 1461:2c05 1461:2c05 [12465.029147] saa7134: card=86 -> LifeView FlyDVB-T / Genius VideoWonder D 5168:0301 1489:0301 [12465.029156] saa7134: card=87 -> ADS Instant TV Duo Cardbus PTV331 0331:1421 [12465.029165] saa7134: card=88 -> Tevion/KWorld DVB-T 220RF 17de:7201 [12465.029173] saa7134: card=89 -> ELSA EX-VISION 700TV 1048:226c [12465.029182] saa7134: card=90 -> Kworld ATSC110/115 17de:7350 17de:7352 [12465.029191] saa7134: card=91 -> AVerMedia A169 B 1461:7360 [12465.029200] saa7134: card=92 -> AVerMedia A169 B1 1461:6360 [12465.029208] saa7134: card=93 -> Medion 7134 Bridge #2 16be:0005 [12465.029216] saa7134: card=94 -> LifeView FlyDVB-T Hybrid Cardbus/MSI TV 5168:3306 5168:3502 5168:3307 4e42:3502 [12465.029229] saa7134: card=95 -> LifeView FlyVIDEO3000 (NTSC) 5169:0138 [12465.029238] saa7134: card=96 -> Medion Md8800 Quadro 16be:0007 16be:0008 16be:000d [12465.029249] saa7134: card=97 -> LifeView FlyDVB-S /Acorp TV134DS 5168:0300 4e42:0300 [12465.029259] saa7134: card=98 -> Proteus Pro 2309 0919:2003 [12465.029267] saa7134: card=99 -> AVerMedia TV Hybrid A16AR 1461:2c00 [12465.029276] saa7134: card=100 -> Asus Europa2 OEM 1043:4860 [12465.029284] saa7134: card=101 -> Pinnacle PCTV 310i 11bd:002f [12465.029293] saa7134: card=102 -> Avermedia AVerTV Studio 507 1461:9715 [12465.029301] saa7134: card=103 -> Compro Videomate DVB-T200A [12465.029308] saa7134: card=104 -> Hauppauge WinTV-HVR1110 DVB-T/Hybrid 0070:6700 0070:6701 0070:6702 0070:6703 0070:6704 0070:6705 [12465.029324] saa7134: card=105 -> Terratec Cinergy HT PCMCIA 153b:1172 [12465.029332] saa7134: card=106 -> Encore ENLTV 1131:2342 1131:2341 3016:2344 [12465.029344] saa7134: card=107 -> Encore ENLTV-FM 1131:230f [12465.029352] saa7134: card=108 -> Terratec Cinergy HT PCI 153b:1175 [12465.029360] saa7134: card=109 -> Philips Tiger - S Reference design [12465.029367] saa7134: card=110 -> Avermedia M102 1461:f31e [12465.029375] saa7134: card=111 -> ASUS P7131 4871 1043:4871 [12465.029384] saa7134: card=112 -> ASUSTeK P7131 Hybrid 1043:4876 [12465.029392] saa7134: card=113 -> Elitegroup ECS TVP3XP FM1246 Tuner Card 1019:4cb6 [12465.029401] saa7134: card=114 -> KWorld DVB-T 210 17de:7250 [12465.029409] saa7134: card=115 -> Sabrent PCMCIA TV-PCB05 0919:2003 [12465.029418] saa7134: card=116 -> 10MOONS TM300 TV Card 1131:2304 [12465.029426] saa7134: card=117 -> Avermedia Super 007 1461:f01d [12465.029435] saa7134: card=118 -> Beholder BeholdTV 401 0000:4016 [12465.029443] saa7134: card=119 -> Beholder BeholdTV 403 0000:4036 [12465.029451] saa7134: card=120 -> Beholder BeholdTV 403 FM 0000:4037 [12465.029459] saa7134: card=121 -> Beholder BeholdTV 405 0000:4050 [12465.029468] saa7134: card=122 -> Beholder BeholdTV 405 FM 0000:4051 [12465.029476] saa7134: card=123 -> Beholder BeholdTV 407 0000:4070 [12465.029484] saa7134: card=124 -> Beholder BeholdTV 407 FM 0000:4071 [12465.029493] saa7134: card=125 -> Beholder BeholdTV 409 0000:4090 [12465.029501] saa7134: card=126 -> Beholder BeholdTV 505 FM 5ace:5050 [12465.029510] saa7134: card=127 -> Beholder BeholdTV 507 FM / BeholdTV 509 5ace:5070 5ace:5090 [12465.029520] saa7134: card=128 -> Beholder BeholdTV Columbus TVFM 0000:5201 [12465.029528] saa7134: card=129 -> Beholder BeholdTV 607 FM 5ace:6070 [12465.029537] saa7134: card=130 -> Beholder BeholdTV M6 5ace:6190 [12465.029545] saa7134: card=131 -> Twinhan Hybrid DTV-DVB 3056 PCI 1822:0022 [12465.029554] saa7134: card=132 -> Genius TVGO AM11MCE [12465.029560] saa7134: card=133 -> NXP Snake DVB-S reference design [12465.029567] saa7134: card=134 -> Medion/Creatix CTX953 Hybrid 16be:0010 [12465.029576] saa7134: card=135 -> MSI TV@nywhere A/D v1.1 1462:8625 [12465.029584] saa7134: card=136 -> AVerMedia Cardbus TV/Radio (E506R) 1461:f436 [12465.029592] saa7134: card=137 -> AVerMedia Hybrid TV/Radio (A16D) 1461:f936 [12465.029601] saa7134: card=138 -> Avermedia M115 1461:a836 [12465.029609] saa7134: card=139 -> Compro VideoMate T750 185b:c900 [12465.029617] saa7134: card=140 -> Avermedia DVB-S Pro A700 1461:a7a1 [12465.029626] saa7134: card=141 -> Avermedia DVB-S Hybrid+FM A700 1461:a7a2 [12465.029634] saa7134: card=142 -> Beholder BeholdTV H6 5ace:6290 [12465.029642] saa7134: card=143 -> Beholder BeholdTV M63 5ace:6191 [12465.029651] saa7134: card=144 -> Beholder BeholdTV M6 Extra 5ace:6193 [12465.029659] saa7134: card=145 -> AVerMedia MiniPCI DVB-T Hybrid M103 1461:f636 1461:f736 [12465.029669] saa7134: card=146 -> ASUSTeK P7131 Analog [12465.029676] saa7134: card=147 -> Asus Tiger 3in1 1043:4878 [12465.029684] saa7134: card=148 -> Encore ENLTV-FM v5.3 1a7f:2008 [12465.029693] saa7134: card=149 -> Avermedia PCI pure analog (M135A) 1461:f11d [12465.029701] saa7134: card=150 -> Zogis Real Angel 220 [12465.029708] saa7134: card=151 -> ADS Tech Instant HDTV 1421:0380 [12465.029716] saa7134: card=152 -> Asus Tiger Rev:1.00 1043:4857 [12465.029725] saa7134: card=153 -> Kworld Plus TV Analog Lite PCI 17de:7128 [12465.029733] saa7134: card=154 -> Avermedia AVerTV GO 007 FM Plus 1461:f31d [12465.029742] saa7134: card=155 -> Hauppauge WinTV-HVR1150 ATSC/QAM-Hybrid 0070:6706 0070:6708 [12465.029752] saa7134: card=156 -> Hauppauge WinTV-HVR1120 DVB-T/Hybrid 0070:6707 0070:6709 0070:670a [12465.029763] saa7134: card=157 -> Avermedia AVerTV Studio 507UA 1461:a11b [12465.029772] saa7134: card=158 -> AVerMedia Cardbus TV/Radio (E501R) 1461:b7e9 [12465.029780] saa7134: card=159 -> Beholder BeholdTV 505 RDS 0000:505b [12465.029789] saa7134: card=160 -> Beholder BeholdTV 507 RDS 0000:5071 [12465.029797] saa7134: card=161 -> Beholder BeholdTV 507 RDS 0000:507b [12465.029806] saa7134: card=162 -> Beholder BeholdTV 607 FM 5ace:6071 [12465.029815] saa7134: card=163 -> Beholder BeholdTV 609 FM 5ace:6090 [12465.029823] saa7134: card=164 -> Beholder BeholdTV 609 FM 5ace:6091 [12465.029832] saa7134: card=165 -> Beholder BeholdTV 607 RDS 5ace:6072 [12465.029840] saa7134: card=166 -> Beholder BeholdTV 607 RDS 5ace:6073 [12465.029849] saa7134: card=167 -> Beholder BeholdTV 609 RDS 5ace:6092 [12465.029857] saa7134: card=168 -> Beholder BeholdTV 609 RDS 5ace:6093 [12465.029866] saa7134: card=169 -> Compro VideoMate S350/S300 185b:c900 [12465.029874] saa7134: card=170 -> AverMedia AverTV Studio 505 1461:a115 [12465.029883] saa7134: card=171 -> Beholder BeholdTV X7 5ace:7595 [12465.029892] saa7134: card=172 -> RoverMedia TV Link Pro FM 19d1:0138 [12465.029900] saa7134: card=173 -> Zolid Hybrid TV Tuner PCI 1131:2004 [12465.029909] saa7134: card=174 -> Asus Europa Hybrid OEM 1043:4847 [12465.029917] saa7134: card=175 -> Leadtek Winfast DTV1000S 107d:6655 [12465.029926] saa7134: card=176 -> Beholder BeholdTV 505 RDS 0000:5051 [12465.029934] saa7134: card=177 -> Hawell HW-404M7 [12465.029941] saa7134: card=178 -> Beholder BeholdTV H7 [12465.029948] saa7134: card=179 -> Beholder BeholdTV A7 [12465.029955] saa7134: card=180 -> Avermedia PCI M733A 1461:4155 1461:4255 [12465.029967] saa7130[0]: subsystem: 1131:0000, board: UNKNOWN/GENERIC [card=0,autodetected] [12465.030033] saa7130[0]: can't get MMIO memory @ 0x0 [12465.030051] saa7134: probe of 0000:01:07.0 failed with error -16 [12465.053892] saa7134 ALSA driver for DMA sound loaded [12465.053900] saa7134 ALSA: no saa7134 cards found tvtime-scanner Leyendo la configuración de /etc/tvtime/tvtime.xml Leyendo la configuración de /home/ricardo/.tvtime/tvtime.xml Escaneando usando la norma de TV NTSC. /home/ricardo/.tvtime/stationlist.xml: No existing NTSC station list "Custom". videoinput: Cannot open capture device /dev/video0: No existe el dispositivo o la dirección ls /dev/ No video directory here

  Read the article

• calculix data visualizor using QT

  - by Ann

  include "final1.h" include "ui_final1.h" include include include ifndef GL_MULTISAMPLE define GL_MULTISAMPLE 0x809D endif define numred 100 define numgrn 10 define numblu 6 final1::final1(QWidget *parent) : QGLWidget(parent) { setFormat(QGLFormat(QGL::SampleBuffers)); rotationX = -38.0; rotationY = -58.0; rotationZ = 0.0; scaling = .05; // glPolygonMode(GL_FRONT_AND_BACK,GL_FILL); //createGradient(); createGLObject(); } final1::~final1() { makeCurrent(); glDeleteLists(glObject, 1); } void final1::paintEvent(QPaintEvent * /* event */) { QPainter painter(this); draw(); } void final1::mousePressEvent(QMouseEvent *event) { lastPos = event-pos(); } void final1::mouseMoveEvent(QMouseEvent *event) { GLfloat dx = GLfloat(event-x() - lastPos.x()) / width(); GLfloat dy = GLfloat(event-y() - lastPos.y()) / height(); if (event->buttons() & Qt::LeftButton) { rotationX += 180 * dy; rotationY += 180 * dx; update(); } else if (event->buttons() & Qt::RightButton) { rotationX += 180 * dy; rotationZ += 180 * dx; update(); } lastPos = event->pos(); } void final1::createGLObject() { makeCurrent(); GLfloat f1[150],f2[150],f3[150],length=0; qreal size=2; int k=1,a,b,c,d,e,f,g,h,element_node_no=0; GLfloat x,y,z; QString str1,str2,str3,str4,str5,str6,str7,str8; int red,green,blue,index=1,displacement; int LUT[1000][3]; for(red=100;red glShadeModel(GL_SMOOTH); glObject = glGenLists(1); glNewList(glObject, GL_COMPILE); // qglColor(QColor(255, 239, 191)); glLineWidth(1.0); QLinearGradient linearGradient(0, 0, 100, 100); linearGradient.setColorAt(0.0, Qt::red); linearGradient.setColorAt(0.2, Qt::green); linearGradient.setColorAt(1.0, Qt::black); //renderArea->setBrush(linearGradient); //glColor3f(1,0,0);pow((f1[e]-f1[a]),2) QFile file("/home/41407/input1.txt"); if (!file.open(QIODevice::ReadOnly | QIODevice::Text)) return; QTextStream in(&file); while (!in.atEnd()) { QString line = in.readLine(); if(k<=125) { str1= line.section(',', 1, 1); str2=line.section(',', 2, 2); str3=line.section(',', 3, 3); x=str1.toFloat(); y=str2.toFloat(); z=str3.toFloat(); f1[k]=x; f2[k]=y; f3[k]=z; /* glBegin(GL_TRIANGLES); // glColor3f(LUT[k][0],LUT[k][1],LUT[k][2]); //QColorAt();//setPointSize(size); glVertex3f(x,y,z); glEnd();*/ } else if(k>125) { element_node_no=0; qCount(line.begin(),line.end(),',',element_node_no); // printf("\n%d",element_node_no); str1= line.section(',', 1, 1); str2=line.section(',', 2, 2); str3=line.section(',', 3, 3); str4= line.section(',', 4, 4); str5=line.section(',', 5, 5); str6=line.section(',', 6, 6); str7= line.section(',', 7, 7); str8=line.section(',', 8, 8); a=str1.toInt(); b=str2.toInt(); c=str3.toInt(); d=str4.toInt(); e=str5.toInt(); f=str6.toInt(); g=str7.toInt(); h=str8.toInt(); glBegin(GL_POLYGON); glPolygonMode(GL_FRONT_AND_BACK,GL_FILL); //brush.setColor(Qt::black);//setColor(QColor::black()); glColor3f(LUT[k][0],LUT[k][1],LUT[k++][2]); // pmp.setBrush(gradient); glVertex3f(f1[a],f2[a] ,f3[a]); glColor3f(LUT[k][0],LUT[k][1],LUT[k++][2]); glVertex3f(f1[b],f2[b] ,f3[b]); glColor3f(LUT[k][0],LUT[k][1],LUT[k++][2]); glVertex3f(f1[c],f2[c] ,f3[c]); glColor3f(LUT[k][0],LUT[k][1],LUT[k++][2]); glVertex3f(f1[d],f2[d] ,f3[d]); glColor3f(LUT[k][0],LUT[k][1],LUT[k++][2]); glVertex3f(f1[a],f2[a] ,f3[a]); glColor3f(LUT[k][0],LUT[k][1],LUT[k++][2]); //glEnd(); //glBegin(GL_LINE_LOOP); glVertex3f(f1[e],f2[e] ,f3[e]); glColor3f(LUT[k][0],LUT[k][1],LUT[k++][2]); glVertex3f(f1[f],f2[f] ,f3[f]); glColor3f(LUT[k][0],LUT[k][1],LUT[k++][2]); glVertex3f(f1[g],f2[g], f3[g]); glColor3f(LUT[k][0],LUT[k][1],LUT[k++][2]); glVertex3f(f1[h],f2[h], f3[h]); glColor3f(LUT[k][0],LUT[k][1],LUT[k++][2]); glVertex3f(f1[d],f2[d] ,f3[d]); glColor3f(LUT[k][0],LUT[k][1],LUT[k++][2]); glVertex3f(f1[a],f2[a] ,f3[a]); glColor3f(LUT[k][0],LUT[k][1],LUT[k++][2]); glEnd(); glBegin(GL_POLYGON); //glVertex3f(f1[a],f2[a] ,f3[a]); glVertex3f(f1[e],f2[e] ,f3[e]); glColor3f(LUT[k][0],LUT[k][1],LUT[k++][2]); glVertex3f(f1[h],f2[h], f3[h]); glColor3f(LUT[k][0],LUT[k][1],LUT[k++][2]); //glVertex3f(f1[d],f2[d] ,f3[d]); glVertex3f(f1[g],f2[g], f3[g]); glColor3f(LUT[k][0],LUT[k][1],LUT[k++][2]); glVertex3f(f1[c],f2[c] ,f3[c]); glColor3f(LUT[k][0],LUT[k][1],LUT[k++][2]); glVertex3f(f1[f],f2[f] ,f3[f]); glColor3f(LUT[k][0],LUT[k][1],LUT[k++][2]); glVertex3f(f1[b],f2[b] ,f3[b]); glColor3f(LUT[k][0],LUT[k][1],LUT[k++][2]); glEnd(); /*length=sqrt(pow((f1[e]-f1[a]),2)+pow((f2[e]-f2[a]),2)+pow((f3[e]-f3[a]),2)); printf("\n%d",length);*/ } k++; } glEndList(); file.close(); k=1; QFile file1("/home/41407/op.txt"); if (!file1.open(QIODevice::ReadOnly | QIODevice::Text)) return; QTextStream in1(&file1); k=1; while (!in1.atEnd()) { QString line = in1.readLine(); // if(k<=125) { str1= line.section(' ', 1, 1); x=str1.toFloat(); str2=line.section(' ', 2, 2); y=str2.toFloat(); str3=line.section(' ', 3, 3); z=str3.toFloat(); displacement=sqrt(pow( (x-f1[k]),2)+pow((y-f2[k]),2)+pow((z-f3[k]),2)); //printf("\n %d : %d",k,displacement); glBegin(GL_POLYGON); //glColor3f(LUT[displacement][0],LUT[displacement][1],LUT[displacement][2]); glVertex3f(f1[k],f2[k],f3[k]); glEnd(); a1[k]=x+f1[k]; a2[k]=y+f2[k]; a3[k]=z+f3[k]; //printf("\nc: %f %f %f",x,y,z); //printf("\nf: %f %f %f",f1[k],f2[k],f3[k]); //printf("\na: %f %f %f",a1[k],a2[k],a3[k]); } k++; glEndList(); } } void final1::draw() { glPushAttrib(GL_ALL_ATTRIB_BITS); glMatrixMode(GL_PROJECTION); glPushMatrix(); glLoadIdentity(); GLfloat x = 3.0 * GLfloat(width()) / height(); glOrtho(-x, +x, -3.0, +3.0, 4.0, 15.0); glMatrixMode(GL_MODELVIEW); glPushMatrix(); glLoadIdentity(); glTranslatef(0.0, 0.0, -10.0); glScalef(scaling, scaling, scaling); glRotatef(rotationX, 1.0, 0.0, 0.0); glRotatef(rotationY, 0.0, 1.0, 0.0); glRotatef(rotationZ, 0.0, 0.0, 1.0); glEnable(GL_MULTISAMPLE); glCallList(glObject); glMatrixMode(GL_MODELVIEW); glPopMatrix(); glMatrixMode(GL_PROJECTION); glPopMatrix(); glPopAttrib(); } /*uint final1::colorAt(int x) { generateShade(); QPolygonF pts = m_hoverPoints->points(); for (int i=1; i < pts.size(); ++i) { if (pts.at(i-1).x() <= x && pts.at(i).x() >= x) { QLineF l(pts.at(i-1), pts.at(i)); l.setLength(l.length() * ((x - l.x1()) / l.dx())); return m_shade.pixel(qRound(qMin(l.x2(), (qreal(m_shade.width() - 1)))), qRound(qMin(l.y2(), qreal(m_shade.height() - 1)))); } } return 0;*/ //final1:: //} /*void final1::createGLObject() { makeCurrent(); //QPainter painter; QPixmap pm(20, 20); QPainter pmp(&pm); pmp.fillRect(0, 0, 10, 10, Qt::blue); pmp.fillRect(10, 10, 10, 10, Qt::lightGray); pmp.fillRect(0, 10, 10, 10, Qt::darkGray); pmp.fillRect(10, 0, 10, 10, Qt::darkGray); pmp.end(); QPalette pal = palette(); pal.setBrush(backgroundRole(), QBrush(pm)); //setAutoFillBackground(true); setPalette(pal); //GLfloat f1[150],f2[150],f3[150],a1[150],a2[150],a3[150]; int k=1,a,b,c,d,e,f,g,h; //int p=0; GLfloat x,y,z; int displacement; QString str1,str2,str3,str4,str5,str6,str7,str8; int red,green,blue,index=1; int LUT[8000][3]; for(red=0;red //glShadeModel(GL_LINE); glObject = glGenLists(1); glNewList(glObject, GL_COMPILE); //qglColor(QColor(120,255,210)); glLineWidth(1.0); //glColor3f(1,0,0); QFile file("/home/41407/input.txt"); if (!file.open(QIODevice::ReadOnly | QIODevice::Text)) return; QTextStream in(&file); while (!in.atEnd()) { //glColor3f(LUT[k][0],LUT[k][1],LUT[k][2]); QString line = in.readLine(); if(k<=125) { //printf("\nline :%c",line); str1= line.section(',', 1, 1); str2=line.section(',', 2, 2); str3=line.section(',', 3, 3); x=str1.toFloat(); y=str2.toFloat(); z=str3.toFloat(); f1[k]=x; f2[k]=y; f3[k]=z; //printf("\nf: %f %f %f",f1[k],f2[k],f3[k]); } else if(k125) //for(p=0;p<6;p++) { //glColor3f(LUT[k][0],LUT[k][1],LUT[k][2]); update(); str1= line.section(',', 1, 1); str2=line.section(',', 2, 2); str3=line.section(',', 3, 3); str4= line.section(',', 4, 4); str5=line.section(',', 5, 5); str6=line.section(',', 6, 6); str7= line.section(',', 7, 7); str8=line.section(',', 8, 8); a=str1.toInt(); b=str2.toInt(); c=str3.toInt(); d=str4.toInt(); e=str5.toInt(); f=str6.toInt(); g=str7.toInt(); h=str8.toInt(); //for (p = 0; p < 6; p++) { // glBegin(GL_LINE_WIDTH); //glColor3f(LUT[126][0],LUT[126][1],LUT[126][2]); //update(); //glNormal3fv(&n[p][0]); //glVertex3f(f1[i],f2[i],f3[i]); glVertex3fv(&v[faces[i][1]][0]); glVertex3fv(&v[faces[i][2]][0]); glVertex3fv(&v[faces[i][3]][0]); //glEnd(); //} glBegin(GL_LINE_LOOP); //glColor3f(p*20,p*20,p); glColor3f(1,0,0); glVertex3f(f1[a],f2[a] ,f3[a]); //painter.fillRect(QRectF(f1[a],f2[a] ,f3[a], 2), Qt::magenta); glVertex3f(f1[b],f2[b] ,f3[b]); glVertex3f(f1[c],f2[c] ,f3[c]); glVertex3f(f1[d],f2[d] ,f3[d]); glVertex3f(f1[a],f2[a] ,f3[a]); glVertex3f(f1[e],f2[e] ,f3[e]); glVertex3f(f1[f],f2[f] ,f3[f]); glVertex3f(f1[g],f2[g], f3[g]); glVertex3f(f1[h],f2[h], f3[h]); glVertex3f(f1[d],f2[d] ,f3[d]); glVertex3f(f1[a],f2[a] ,f3[a]); //glColor3f(1,0,0); //QLinearGradient ( f1[a], f2[a], f1[b], f2[b] ); glEnd(); glBegin(GL_LINES); //glNormal3fv(&n[p][0]); //glColor3f(LUT[k][0],LUT[k][1],LUT[k][2]); glVertex3f(f1[e],f2[e] ,f3[e]); glVertex3f(f1[h],f2[h], f3[h]); glVertex3f(f1[g],f2[g], f3[g]); glVertex3f(f1[c],f2[c] ,f3[c]); glVertex3f(f1[f],f2[f] ,f3[f]); glVertex3f(f1[b],f2[b] ,f3[b]); glEnd(); } } k++; } glEndList(); qglColor(QColor(239, 255, 191)); glLineWidth(1.0); glColor3f(0,1,0); k=1; QFile file1("/home/41407/op.txt"); if (!file1.open(QIODevice::ReadOnly | QIODevice::Text)) return; QTextStream in1(&file1); k=1; while (!in1.atEnd()) { QString line = in1.readLine(); // if(k<=125) { str1= line.section(' ', 1, 1); x=str1.toFloat(); str2=line.section(' ', 2, 2); y=str2.toFloat(); str3=line.section(' ', 3, 3); z=str3.toFloat(); displacement=sqrt(pow( (x-f1[k]),2)+pow((y-f2[k]),2)+pow((z-f3[k]),2)); printf("\n %d : %d",k,displacement); glBegin(GL_POINT); glColor3f(LUT[displacement][0],LUT[displacement][1],LUT[displacement][2]); glVertex3f(x,y,z); glLoadIdentity(); glEnd(); a1[k]=x+f1[k]; a2[k]=y+f2[k]; a3[k]=z+f3[k]; //printf("\nc: %f %f %f",x,y,z); //printf("\nf: %f %f %f",f1[k],f2[k],f3[k]); //printf("\na: %f %f %f",a1[k],a2[k],a3[k]); } k++; glEndList(); } }*/ /*void final1::draw() { glPushAttrib(GL_ALL_ATTRIB_BITS); glMatrixMode(GL_PROJECTION); glPushMatrix(); glLoadIdentity(); GLfloat x = 3.0 * GLfloat(width()) / height(); glOrtho(-x, +x, -3.0, +3.0, 4.0, 15.0); glMatrixMode(GL_MODELVIEW); glPushMatrix(); glLoadIdentity(); glTranslatef(0.0, 0.0, -10.0); glScalef(scaling, scaling, scaling); glRotatef(rotationX, 1.0, 0.0, 0.0); glRotatef(rotationY, 0.0, 1.0, 0.0); glRotatef(rotationZ, 0.0, 0.0, 1.0); glEnable(GL_MULTISAMPLE); glCallList(glObject); glMatrixMode(GL_MODELVIEW); glPopMatrix(); glMatrixMode(GL_PROJECTION); glPopMatrix(); glPopAttrib(); }*/ I need to change the color of a portion of beam where pressure is applied.But I am not able to color the front end back phase.

  Read the article

• GPU YUV to RGB. Worth the effort?

  - by Jaime Pardos

  Hello, I have to convert several full PAL videos (720x576@25) from YUV 4:2:2 to RGB, in real time, and probably a custom resize for each. I have thought of using the GPU, as I have seen some example that does just this (except that it's 4:4:4 so the bpp is the same in source and destiny)-- http://www.fourcc.org/source/YUV420P-OpenGL-GLSLang.c However, I don't have any experience with using GPU's and I'm not sure of what can be done. The example, as I understand it, just converts the video frame to YUV and displays it in the screen. Is it possible to get the processed frame instead? Would it be worth the effort to send it to the GPU, get it transformed, and sending it again to main memory, or would it kill performance? Being a bit platform-specific, assuming I work on windows, is it possible to get an OpenGL or DirectDraw surface from a window so the GPU can draw directly to it?

  Read the article

• Eidetic memory: What magic numbers you still remember?

  - by Hao

  Long before you practice writing readable code, what "magic numbers" you still remember up to this day? here's some of my list: 72 80 75 77 13 32 27 - up down left right enter space escape 1 2 4 128 - blue green red blink 67h 33h 17h - interrupt for EMS, mouse, printer function AH 9, interrupt 21 alt+219 for block ASCII alt+164 ñ 90 NOP 13 10 carriage return, line feed ascii 1 and 2 face, ascii 3 heart. no not this heart: <3 :-) debug -o72,10 -o71,12 clears the BIOS password. I don't know what those numbers mean, it's like a trade secret that gets shared with each other during college days. ascii 7 sounds a beep P.S. Somehow, remembering some of these magic numbers can help you in some tech problems, your keyboard is broken, the office pal's keyboard doesn't have accented characters. An anecdote, during college, one of my friend asked me how to remove the newlines in his Word document. Not having used Word so much then, I somehow "intuitively" guessed to find ^013 and replace it with blank. Well it works :-)

  Read the article

• Creating Videos: Which Framerate is common in the US?

  - by Stebi

  I know that there are differences in different regions of the world regarding the framerate of videos. E.g. a DVD in Europe is in PAL with 720x756 and 25.0 fps. In the US its the NTSC standard with 720x480 and 29.97 fps. When I don't want to generate a DVD but a plain video file, e.g. WMV oder AVI what framerate is used in USA? I have a end user application where the user can generate videos, so what framerate does the US user expect it to have? Is there a difference in SD and HD video?

  Read the article

• How do I get an Enter USB TV Box TV tuner aka Gadmei UTV302 to work?

  - by Subhash

  Has anyone had any success in using the Enter USB TV Box from Enter Multimedia? It comes bundled with software that works in Windows. I have had no luck using it in Ubuntu 10.10. Update 1 Here is the output from lsusb Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 003: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse Bus 004 Device 002: ID 046d:c312 Logitech, Inc. DeLuxe 250 Keyboard Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 006: ID 1f71:3301 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub I can't find the Enter USB TV Box listed in this. In the dmesg tail command, I found something that seems to be related to the card: usb 1-5: new high speed USB device using ehci_hcd and address 6 usb 1-5: config 1 interface 0 altsetting 1 bulk endpoint 0x83 has invalid maxpacket 256 Update 2 From Windows I learned that this USB TV tuner uses some chipset from Gadmei corporation. All computer stores in India sell Enter USB TV Box if you ask for an USB TV tuner. No other brand seems to be interested in this market. Update 3 I learned that this TV tuner is rebranded version of Gadmei UTV302 (USB TV Tuner Box). Update 4 I tried adding em28xx as the chipset (as suggested by user BOBBO below) for the tuner but that did not work. I went back to my Pinnacle PCTV internal card. I don't think the tuner referred by UbuntuForums (Gadmei UTV 330) and the tuner that I have (Gadmei UTV 302) are the same. My USB tuner is several times bigger. My tuner seems to be a newer device with a newer tuner chip. I will submit details of this device to the LinuxTV developers this weekend. Update 5 I opened the tuner box and found that it uses a tuner from a Chinese company - Tenas. Model is TNF 8022-DFA. Update 6 Tuner chip specs (retrived from supplier directory) for Tenas TNF 8022-DFA. Supply voltage: true 5V device(low power dissipation) Control system: I2C bus control of tuning, address selection Tuning system: PLL controlled tuning Receiving system: system PAL D/K,IF(Intermediate Frequency): 38MHz Receiving channels: full frequency range from channel DS1 (49.75MHz) to channel DS57 (863.25MHz); Use Texas Instruments SN761678 IC solution, with mini install size Update 7 Reverse side of the circuit board. Picture of the TV tuner

  Read the article

• Evolution Of High Definition TV Viewing

  - by Gopinath

  The following guest post is written by Rob, who is also blogging on entertainment technology topics on iwantsky.com Gone are the days when you need to squint to be able to see the emotions on the faces of Humphrey Bogart and Ingrid Bergman as the lovers bid each other adieu in the classic film Casablanca. These days, watching an ordinary ant painstakingly carry a leaf in Animal Planet can be an exhilarating experience as you get to see not only the slightest movement but also the demarcation line between the insect’s head, thorax and abdomen. The crystal clear imagery was made possible by the sharp minds and the tinkering hands of the scientists that have designed the modern world’s HDTV. What is HDTV and what makes people so agog to have this new innovation in TV watching? HDTV stands for High Definition TV. Television viewing has indeed made a big leap. From the grainy black and whites, TV viewing had moved to colored TVs, progressed to SD TVs and now to HDTV. HDTV is the emerging trend in TV viewing as it delivers bigger and clearer pictures and better audio. Viewers can have a cinema-like TV viewing experience right in the comforts of their own home. With HDTV the viewer is allowed to have a better viewing range. With Standard (SD) TV, the viewer has to be at a distance that is from 3 to 6 times the size of the screen. HDTV allows the viewer to enjoy sharper and clearer images as it is possible to sit at a distance that is 1.5 or 3 times the size of the screen without noticing any image pixilation. Although HDTV appears to be a fairly new innovation, this system has actually existed in various forms years ago. Development of the HDTV was started in Europe as early as 1940s. However, the NTSC and the PAL/SECAM, the two analog TV standards became dominant and became popular worldwide. The analog TV was replaced by the digital TV platform in the 1990s. Even during the analog era, attempts have been made to develop HDTV. Japan has come out with MUSE system. However, due to channel bandwidth requirement concerns, the program was shelved. The entry of four organizations into the HDTV market spurred the development of a beneficial coalition. The AT&T, ATRC, MIT and Zenith HDTV combined forces. In 1993, a Grand Alliance was formed. This group is composed of researchers and HDTV manufacturers. A common standard for the broadcast system of HDTV was developed. In 1995, the system was tested and found successful. With the higher screen resolution of HDTV, viewing has never been more enjoyable. [Image courtesy: samsung] This article titled,Evolution Of High Definition TV Viewing, was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

  Read the article

• SQLAuthority News – Reliving TechEd with Vinod Kumar at Bangalore User Groups

  - by pinaldave

  TechEd India 2012 was held in Bangalore last March 21 to 23, 2012. Just like every year, this event is bigger, grander and inspiring. Here is my blog post reviewing the event SQLAuthority News – #TechEdIn – TechEd India 2012 Memories and Photos. For me this is family event – I get to meet my friends who are dear as my family. I like to call User Groups as family too. Family shares life’s personal happiness and experience – the same way User Group shares professional experiences and quite often UG members become just like family member. When I learned that follower user group together building up a unique event I was pretty excited to learn who is going to be speaker for the event. BDotNet.in – Bangalore .NET Usergroup BITPro.in – Bangalore ITPro Usergroup It was indeed joy when I learned that presenter will be Vinod Kumar, who is integral part of user groups and hardcore SQL Server enthusiast. Vinod Kumar is going to present on following two sessions which are both focused on internals of the Windows and SQL Server. Understanding Windows with SysInternals Tools – This session will cover various tools from usage of Memory, x86 architecture, x64, WOW mode, Page faults, Virtual Memory mapping, OOM scenario, Perf Tool, PAL tool, Logman and more. Peeling the Onion: SQL Server Internals Demystified – This session will cover advanced disk formats, SQL Server 2012 security changes, memory changes, indirect checkPoint and more. I am very excited as this time I will get opportunity to sit in front rows (as I will be reaching there to get best possible position) and learn. I am looking forward to the event and I hope you will join us as well. Event Details: Date: Saturday, April 7, 2012 (10:30am until 1:30pm) Venue: Microsoft, Domlur, Bangalore. Event Details: https://www.facebook.com/events/139444029517882/ This session is FREE for all and everybody and anybody can walk in. Community Blog Posts Here are few of the blog post written by the community on this subject. Vinod Kumar on Reliving #TechEdIn at Blr UG Manas Dash on Reliving TechEd India 2012 with Vinod Kumar Sudeepta Ganguly on SysInternals n SQLInternals with Vinod Kumar Lohith Re Live TechEd India 2012 with Vinod Kumar  Reference: Pinal Dave (http://blog.sqlauthority.com) http://www.youtube.com/watch?v=oRw-p4mahLU Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Author Visit, T SQL, Technology, Video

  Read the article

• Going for Gold

  - by Simple-Talk Editorial Team

  There was a spring in the step of some members of our development teams here at Red Gate, on hearing that on five gold awards at 2012′s SQL Mag Community and Editors Choice Awards. And why not? It’s a nice recognition that their efforts were appreciated by many in the SQL Server community. The team at Simple-Talk don’t tend to spring, but even we felt a twinge of pride in the fact that SQL Scripts Manager received Gold for Editor’s Choice in the Best Free Tools category. The tool began life as a “Down Tools” project and is one that we’ve supported and championed in various articles on Simple-talk.com. Over a Cambridge Bitter in the Waggon and Horses, we’ve often reflected on how nice it would be to nominate our own awards. Of course, we’d have to avoid nominating Red Gate tools in each category, even the free ones, for fear of seeming biased,  but we could still award other people’s free tools, couldn’t we? So allow us to set the stage for the annual Simple-Talk Community Tool awards… Onto the platform we shuffle, to applause from the audience; Chris in immaculate tuxedo, Alice in stunning evening gown, Dave and Tony looking vaguely uncomfortable, Andrew somehow distracted, as if his mind is elsewhere. Tony strides up to the lectern, and coughs lightly…”In the free-tool category we have the three nominations, and they are…” (rustle of the envelope opening) Ola Hallengren’s SQL Server Maintenance Solution (applause) Adam Machanic’s WhoIsActive (cheers, more applause) Brent Ozar’s sp_Blitz (much clapping) “Before we declare the winner, I’d like to say a few words in recognition of a grand tradition in a SQL Server community that continues to offer its members a steady supply of excellent, free tools. It hammers home the fundamental principle that a tool should solve a single, pressing and frustrating problem, but you should only ever build your own solution to that problem if you are certain that you cannot buy it, or that someone has not already provided it free. We have only three finalists tonight, but I feel compelled to mention a few other tools that we also use and appreciate, such as Microsoft’s Logparser, Open source Curl, Microsoft’s TableDiff.exe, Performance Analysis of Logs (PAL) Tool, SQL Server Cache Manager and SQLPSX.” “And now I’ll hand over to Alice to announce the winner.” Alice strides over to the microphone, tearing open the envelope. “The winner,” she pauses for dramatic effect “… is …Ola Hallengren’s SQL Server Maintenance Solution!” Queue much applause and consumption of champagne. Did we get it wrong? What free tool would you nominate? Let us know! Cheers, Simple-Talk Editorial Team (Andrew, Alice, Chris, Dave, Tony)

  Read the article

• Evolution Of High Definition TV Viewing

  - by Gopinath

  The following guest post is written by Rob, who is also blogging on entertainment technology topics on iwantsky.com Gone are the days when you need to squint to be able to see the emotions on the faces of Humphrey Bogart and Ingrid Bergman as the lovers bid each other adieu in the classic film Casablanca. These days, watching an ordinary ant painstakingly carry a leaf in Animal Planet can be an exhilarating experience as you get to see not only the slightest movement but also the demarcation line between the insect’s head, thorax and abdomen. The crystal clear imagery was made possible by the sharp minds and the tinkering hands of the scientists that have designed the modern world’s HDTV. What is HDTV and what makes people so agog to have this new innovation in TV watching? HDTV stands for High Definition TV. Television viewing has indeed made a big leap. From the grainy black and whites, TV viewing had moved to colored TVs, progressed to SD TVs and now to HDTV. HDTV is the emerging trend in TV viewing as it delivers bigger and clearer pictures and better audio. Viewers can have a cinema-like TV viewing experience right in the comforts of their own home. With HDTV the viewer is allowed to have a better viewing range. With Standard (SD) TV, the viewer has to be at a distance that is from 3 to 6 times the size of the screen. HDTV allows the viewer to enjoy sharper and clearer images as it is possible to sit at a distance that is 1.5 or 3 times the size of the screen without noticing any image pixilation. Although HDTV appears to be a fairly new innovation, this system has actually existed in various forms years ago. Development of the HDTV was started in Europe as early as 1940s. However, the NTSC and the PAL/SECAM, the two analog TV standards became dominant and became popular worldwide. The analog TV was replaced by the digital TV platform in the 1990s. Even during the analog era, attempts have been made to develop HDTV. Japan has come out with MUSE system. However, due to channel bandwidth requirement concerns, the program was shelved. The entry of four organizations into the HDTV market spurred the development of a beneficial coalition. The AT&T, ATRC, MIT and Zenith HDTV combined forces. In 1993, a Grand Alliance was formed. This group is composed of researchers and HDTV manufacturers. A common standard for the broadcast system of HDTV was developed. In 1995, the system was tested and found successful. With the higher screen resolution of HDTV, viewing has never been more enjoyable. [Image courtesy: samsung] This article titled,Evolution Of High Definition TV Viewing, was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

  Read the article

• Excel techniques for perfmon csv log file analysis

  - by Aszurom

  I have perfmon running against several servers, where I'm outputting to a .csv file data like CPU %time, memory bytes free, hard disk I/O metrics like s/write and writes/s. The ones graphing the SQL servers are also collecting SQL stats. The web servers are collecting .Net relevant stuff. I am aware of PAL, and used it as a template of what data to capture based on server type actually. I just don't think the output it generates is detailed or flexible enough - but it does a pretty remarkable job of parsing logs and making graphs. I'm borderline incompetent with Excel, so I'm hoping to be directed to some knowledge of how to take a perfmon output .csv and mine it in Excel to produce some numbers that are meaningful to me as a sysadmin. I could of course just pick a range of data and assemble a graph out of that and look for spikes and trends, but I'm convinced there is some technique to this that makes it more manageable than looking at a monsterous spreadsheet of numbers and trying to make graphs of it. Plus, it's pretty time consuming and not something I can do as a "take a glance at the servers" sort of routine. I'm graphing CPU, disk use, network b/sec, etc. in Cacti as well, which is nice for seeing big trends. The problem is that it is 5 minute averages, so a server could have a problem but it's intermittent and washes out in a 5 min average. What do you do with perfmon data that I could learn from?

  Read the article

• Better approach to archiving large amounts of original video footage using optical media (DVD/Blu-ra

  - by Rob

  This question is to share my experience as well as ask for suggestions for better methods. Along with 2 friends, I completed the making of a short documentary film in 2006. Clip is at: http://www.youtube.com/mediamotioninvision The film was edited in Adobe Premiere Pro 1.5 on Windows XP. More details and screenshot here: http://www.flickr.com/photos/smilingrobbie/1350235514/ ( note this is not intended to be a plug, we've moved on from this initial learning curve project ;) ) The film is in 4:3 standard definition 720x576 PAL format. As well as retaining the final 30minute film, I wanted to keep all original files that assembled together to make the film. The footage was 83.5Gb So I archived them to over 20 4.7Gb DVD recordables in the original .avi format (i.e. data DVD-ROM format, NOT DVD-Video Mpeg2) Some .avi DV video files were larger than 4.7Gb so I used 7-zip to split them ( here is a guide as to how to do that: http://www.linglom.com/2008/10/12/how-to-split-a-large-file-using-7-zip/ ) To recombine them, a dos shell command like this would do that: copy /b file.avi.* file.avi would do the job, where .* is a wild card to include all the split parts e.g. 001, 002...00n assuming they are all in the same directory path folder. file.avi is the recombined file identical to the original. Later on, I bought a LG BE06 LU10 USB 2.0 Super-multi Blu-ray burner and archived the footage to 2 (two) x 50Gb BD-R DL discs. Again in the original format, written as files to a BD-R in the BD-R BD-ROM UDF format readable by PC/Mac etc, NOT Blu-ray video/film format. This seems to be a good solution for me, because: the archive is in a robust, reasonably permanent, non-volatile medium, i.e. DVD recordable / Blu-ray (debates about stability of optical media organic chemical dye compounds/substrates aside) the format of the archive is accessible by open source tools or just plain Windows Explorer and it's not in a proprietary format I just thought I'd ask folks for their experience on better methods, if such exist.

  Read the article

• VLC tv card streaming

  - by Franco

  I'm trying to stream the output of my desktop's tv card to my laptop using vlc without success. I have on both pcs ArchLinux installed. I'm stuck here: $ cvlc v4l2:///dev/video0:norm=pal-nc:frequency=543250:size=640x480:channel=0:input-slave=alsa:///dev/dsp:audio=0 --sout '#transcode{vcodec=mp4v,acodec=mpga,vb=3000,ab=256,vt=800000,keyint=80,deinterlace}:standard{access=http,mux=ogg,dst=192.168.0.2:8080}' --ttl 12 VLC media player 1.1.4 The Luggage (revision exported) Blocked: call to unsetenv("DBUS_ACTIVATION_ADDRESS") Blocked: call to unsetenv("DBUS_ACTIVATION_BUS_TYPE") [0x1c9e480] inhibit interface error: Failed to connect to the D-Bus session daemon: /usr/bin/dbus-launch terminated abnormally with the following error: Autolaunch error: X11 initialization failed. [0x1c9e480] main interface error: no suitable interface module [0x1ca1500] main interface error: no suitable interface module [0x1bb3120] main libvlc error: interface "globalhotkeys,none" initialization failed [0x1c9f940] dummy interface: using the dummy interface module... [0x1ca4850] main access out: creating httpd [0x1ebb340] mux_ogg mux: Open And on my laptop: $ vlc http://192.168.0.2:8080 VLC media player 1.1.4.1 The Luggage (revision exported) Blocked: call to unsetenv("DBUS_ACTIVATION_ADDRESS") Blocked: call to unsetenv("DBUS_ACTIVATION_BUS_TYPE") Blocked: call to setlocale(6, "") Blocked: call to sigaction(17, 0xb25c7058, 0xb25c70e4) Warning: call to signal(13, 0x1) Warning: call to signal(13, 0x1) Blocked: call to setenv("ORBIT_SOCKETDIR", "/tmp/orbit-zf", 1) Warning: call to srand(1287690122) Warning: call to rand() Blocked: call to setlocale(6, "") (process:17933): Gtk-WARNING **: Locale not supported by C library. Using the fallback 'C' locale. Warning: call to signal(13, 0x1) Blocked: call to setlocale(6, "") [0x8af5f04] main stream error: cannot pre fill buffer Any idea why this isn't working?

  Read the article

• newsubtitles line not working in FFmpeg

  - by godMode

  i'm trying to run the following line on FFmpeg that will basically "re-format" an MKV file to MP4 without doing any re-encoding and also embed SRT subtitles onto the MP4 output: ffmpeg -i test.mkv -i test.srt -newsubtitle -acodec copy -vcodec copy test.mp4 Without the "-i test.srt -nwesubtitle" bit, it seems to work just fine; however, with it I get the following output: Seems stream 0 codec frame rate differs from container frame rate: 47.95 (5000000/104271) - 23.98 (24000/1001) Stream #0.0(eng): Video: h264, yuv420p, 1280x720 [PAR 1:1 DAR 16:9], 23.98 fps, 23.98 tbr, 1k tbn, 47.95 tbc Stream #0.1(eng): Subtitle: 0x0000 Metadata: title : English Stream #0.2(jpn): Audio: aac, 48000 Hz, stereo, s16 Metadata: title : Japanese 2.0 Stream #0.3(eng): Audio: aac, 48000 Hz, stereo, s16 Metadata: title : English 2.0 Stream #0.4(eng): Subtitle: 0x0000 Metadata: title : English Songs & Signs Stream #0.5: Attachment: 0x0000 Metadata: filename : MyriadPro-Bold.ttf Stream #0.6: Attachment: 0x0000 Metadata: filename : MyriadPro-RegularHaruhi.ttf Stream #0.7: Attachment: 0x0000 Metadata: filename : ChaparralPro-BoldIt.ttf Stream #0.8: Attachment: 0x0000 Metadata: filename : ChaparralPro-SemiboldIt.ttf Stream #0.9: Attachment: 0x0000 Metadata: filename : epmgobld_ending.ttf Stream #0.10: Attachment: 0x0000 Metadata: filename : epminbld_opening.ttf Stream #0.11: Attachment: 0x0000 Metadata: filename : Folks-Bold.ttf Stream #0.12: Attachment: 0x0000 Metadata: filename : GosmickSansBold.ttf Stream #0.13: Attachment: 0x0000 Metadata: filename : WarnockPro-LightDisp.ttf Stream #0.14: Attachment: 0x0000 Metadata: filename : epmgobld_ending.ttf Stream #0.15: Attachment: 0x0000 Metadata: filename : GosmickSansBold.ttf Stream #0.16: Attachment: 0x0000 Metadata: filename : Marker SD 1.2.ttf Stream #0.17: Attachment: 0x0000 Metadata: filename : MyriadPro-Bold.ttf Stream #0.18: Attachment: 0x0000 Metadata: filename : MyriadPro-RegularHaruhi.ttf Stream #0.19: Attachment: 0x0000 Metadata: filename : MyriadPro-SemiCn.ttf test.srt: Invalid data found when processing input I tried adding "-r pal", "-r ntsc" or "-r 23.98" thinking it was framerate issue with no change.

  Read the article

• VGA to S-Video/Video converter showing mashed up picture.

  - by Matthijs Wessels

  Earlier I asked this question: *http://superuser.com/questions/132374/does-the-lenovo-t60p-vga-port-support-an-s-video-signal As a result I acquired the following item: http://cgi.ebay.nl/ws/eBayISAPI.dll?ViewItem&item=250588098582&ssPageName=ADME:B:EOIBSA:NL:1123 Yea I'm a cheapass... Anyway, it just arrived and now I am trying to get it to work... The manual is not very informative other than telling me, this is the vga in, this is the vga out, this is the s/video out etc. Plus it tells me the system should support the following resolutions@refresh rate: 640x480@60/72/75Hz 800x600@60/75Hz 1024x768@60Hz I can connect it to my laptop and then I connect the S/Video and the Video to my tv which only gives me a blurred image (like when you set your monitor to a resolution it doesn't support). The VGA out however works fine to my tft monitor. The are two switches on the converter. I think one switches between s/video and video and the other between PAL and NTSC. But alas, no combination seems to give a better picture (it does give a different picture). Can anyone help me to solve this problem? I have downloaded this program called powerstrip, but I have no idea how to use it and if it can even solve my problem... Thanks in advance. I use Windows XP on a Lenovo t60p and I try to connect it to a Philips 32PFL7403D/12 LCD TV from VGA to a converter to S-video or video.

  Read the article

• Possible disk IO issue

  - by Tim Meers

  I've been trying to really figure out what my IOPS are on my DB server array and see if it's just too much. The array is four 72.6gb 15k rpm drives in RAID 5. To calculate IOPS for RAID 5 the following formula is used: (reads + (4 * Writes)) / Number of disks = total IOPS. The formula is from MSDN. I also want to calculate the Avg Queue Length but I'm not sure where they are getting the formula from, but i think it reads on that page as avg que length/number of disks = actual queue. To populate that formula I used the perfmon to gather the needed information. I came up with this, under normal production load: (873.982 + (4 * 28.999)) / 4 = 247.495. Also the disk queue lengh of 14.454/4 = 3.614. So to the question, am I wrong in thinking this array has a very high disk IO? Edit I got the chance to review it again this morning under normal/high load. This time with even bigger numbers and IOPS in excess of 600 for about 5 minutes then it died down again. But I also took a look at the Avg sec/Transfer, %Disk Time, and %Idle Time. These number were taken when the reads/writes per sec were only 332.997/17.999 respectively. %Disk Time: 219.436 %Idle Time: 0.300 Avg Disk Queue Length: 2.194 Avg Disk sec/Transfer: 0.006 Pages/sec: 2927.802 % Processor Time: 21.877 Edit (again) Looks like I have that issue solved. Thanks for the help. Also for a pretty slick parser I found this: http://pal.codeplex.com/ It works pretty well for breaking down the data into something usable.

  Read the article

• The Java Community Process: What's Broken and How to Fix It

  - by Tori Wieldt

  In a panel discussion today at TheServerSide Java Symposium, Patrick Curran, Head of the Java Community Process, James Gosling, and ?Reza Rahman, member, Java EE 6 and EJB 3.1 expert groups, discussed the state of the JCP. Moderated by Cameron McKenzie, Editor of TheServerSide.com, they discussed what's wrong with JCP and ways to fix it.What's wrong with the JCP? Reza Rahman was quite supportive of the JCP. "I work as a consultant, and it's much better than getting a decision made a large company," Reza commented. He gave the JCP "Five stars" and explained that as an individual, he was able to have an impact on things that mattered to him. Cameron asked, "Now all these JCP problems came after Oracle acquired Sun, right?" To which the crowd had a good laugh, and the panel all agreed many of the JCP problems existed under Sun. How is the JCP handled differently under Oracle than Sun? "Pretty similar," said James. Oracle "tends more towards practicality" said Reza. "I'm glad to see things moving again, we've got several new JSRs filed," Patrick commented.How to Fix It?They all agreed greater transparency is a top issue. Without it, people assume sinister behavior whether it's there or not. Patrick said that currently spec leads are "encouraged" to be transparent, and the JCP office is planning to submit JSRs to change the JCP process so transparency is mandated, both for mailing lists and issue tracking. Shining a light on problems is the best way to fix them.Reza said the biggest problem is lack of a participation from the community. If more people are involved, a lot of the problems go away. "Developers are too non-chalant, they should realize what happens in the JCP has an direct impact on their career and they need to get involved." Reza commented.Got Involved!During Q&A, someone asked how a developer could get involved. They answered: Pick a JSR you are interested in and follow it. To start, you could read an article about the JSR and comment on the article (expert group members do read the comments). Or read the spec, discuss it with others and post a blog about it. Read the Expert Group proceedings. Join the JCP (free for individuals). Open source projects have code that you can download and play with, download it and provide feedback. Patrick mentioned that the JCP really wants more participation. "One way we are working on it is that we are encouraging JUGs to join the JCP as a group, and that makes all members of the JUG JCP members," Patrick said.They commented that most spec leads are desperate for feedback. "And, please get involved BEFORE the spec is finalized!" James declared. Someone from the audience said it's hard to put valuable time into something before it's baked. Patrick explained that Post Final Draft (PFD) is the time in the JCP process when the spec is mature enough to review but before the spec is finalized. The panel agreed the worst thing that could happen is that most people in the Java community just complain about the JCP without getting involved. Developer Sumit Goyal, conference attendee, thought it was a healthy discussion. "I got insights into how JSRs are worked on and finalized," he said.Key LinksThe Java Community Process Website  http://jcp.org/en/home/indexArticle: A Conversation with JCP Chair Patrick Curran Oracle Technology Network http://www.oracle.com/technetwork/java/index.htmlTheServerSide Java Symposium  http://javasymposium.techtarget.com/

  Read the article

• December 3 is Stephanie Choyer Day

  - by rickramsey

  I don't answer Stephanie Choyer's email just so I can enjoy her French accent when she calls. "Reek! Reek! Why do joo not answer my eemails?" Without the French, life on Earth would be so much poorer. No, they don't bring to the party any motorcycles that grow chest on your hair, and the Citroen is such a frightening study in Automobile design that I don't dare climb inside one. But they have French architecture. French sidewalks. French villages. The French Alps. Grenoble. French cheese. French wine. And that glorious French accent. If I were French, I'd spend all my time enjoying being French. Which makes the work that Stephanie does day in and day with our hard-edged technologies and stubborn technologists so admirable. Oracle Solaris 11 Resources for Sysadmins and Developers The page in the link above represents the work of many people, but it was Steph who rounded them up. And it wasn't easy. I know, because I ran and hid from her on many, many occasions. But she was tireless. "Reek. Reek. Why have you not published Glynn's article? Pleeeease, you must!" Remember when tech companies gave you a simple choice? You could either read the 27,000 pages of documentation or a double-sided data sheet. Which will it be, pal? Then they started writing white papers. 74 pages of excellent prose did a beautiful job of explaining why the technology was fantastic, but never told you how to use it. Well, have you taken a look at these? How-To Technical Articles for System Admins and Developers Now you can get wicked excited about a cool technique described in a 74-page white paper, and find a technical article that shows you exactly how to use it. The wicked smart marketing folks on the Oracle Solaris team wrote them, but it was Steph who bribed them with a Cabernet or beat them over the head with a baguette until all that work was finished and posted on OTN. There are songs about French wine, but not about French vintners. There are songs about French cities, but not about French bricklayers. About French sidewalks, but not about the French policemen who keep them safe. As far as I know, there are no songs about OTN, but if there were, they would probably neglect to mention Steph. Which is why today, Dec 3rd, we celebrate Stephanie Choyer Day. We dedicate this day to our relentless, hardworking, tireless, patient and friendly French colleague with the delightful accent. If I knew how to speak French, I'd say "Thanks for all you do" in French. But I don't speak French. And I don't trust online translations. I'd probably wind up saying "My left foot yearns for curdled milk." So here it is in plain old English: Thank you, Stephanie. psssst! about that documentation and those white papers ... In case you haven't noticed, the Oracle Solaris doc team has done some pretty cool things with the Solaris docs. And those white papers are interesting reading, well worth setting aside some time. Because with Solaris, as you know, it's not just about getting by with a rudimentary grasp of the basics. It's about the amazing stuff savvy sysadmins and developers can do when they really understand it. Find them here: White Papers Documentation And don't forget training! - Rick Website Newsletter Facebook Twitter

  Read the article

• Subscription Based Billing

  - by regex

  Hello All, I'm putting together a small start up company which will be set up with a subscription based billing model. The bill will go to customers on either a monthly or quarterly basis depending on the end user's preference. My question is two parted: I'm new to online billing and I'm only really aware of Pay Pal when it comes to third party bill payment, but this seems more like a check out system. I'm sure there are better alternatives than PayPal for third party billing processors (I have tried Googling for them, but I'm having trouble finding exactly what I'm looking for). What options (companies) are available for third party payment processing and what types of experiences (good or bad) have you had with them? We would like to give our customers the ability to set up recurring payments. I'd rather not store a customer's credit card number on our database as I imagine there are a plethora of compliance guidelines around this. Is there a third party solution for recurring payment processing? On a side note, this is not necessarily a code related question and is more business focused. I wasn't sure if there was a better route for posting this question, and please commont or modify this if there is another route I should take. Thanks!!

  Read the article

• Choropleth mapping issue in R

  - by chasec

  I am trying to follow the tutorial described here: http://www.thisisthegreenroom.com/2009/choropleths-in-r/ The below code executes, but it is either not matching my dataset with the maps_counties data properly, or it isn't plotting it in the order I would expect. For example, the resulting areas for the greater NYC area show no density while random counties in PA show the highest density. The general format of my data table is: county state count fairfield connecticut 17 hartford connecticut 6 litchfield connecticut 3 new haven connecticut 12 ... ... westchester new york 70 yates new york 1 luzerne pennsylvania 1 Note this data is in order by state and then county and includes data for CT, NJ, NY, & PA. First, I read in my data set: library(maps) library(RColorBrewer) d <- read.table("gissum.txt", sep="\t", header=TRUE) #Concatenate state and county info to match maps library d$stcon <- paste(d$state, d$county, sep=",") #Color bins colors = brewer.pal(5, "PuBu") d$colorBuckets <- as.factor(as.numeric(cut(d$count,c(0,10,20,30,40,50,300)))) Here is my matching mapnames <- map("county",plot=FALSE)[4]$names colorsmatched <- d$colorBuckets [na.omit(match(mapnames ,d$stcon))] Plotting: map("county" ,c("new york","new jersey", "connecticut", "pennsylvania") ,col = colors[d$colorBuckets[na.omit(match(mapnames ,d$stcon))]] ,fill = TRUE ,resolution = 0 ,lty = 0 ,lwd= 0.5 ) map("state" ,c("new york","new jersey", "connecticut", "pennsylvania") ,col = "black" ,fill=FALSE ,add=TRUE ,lty=1 ,lwd=2 ) map("county" ,c("new york","new jersey", "connecticut", "pennsylvania") ,col = "black" ,fill=FALSE ,add=TRUE , lty=1 , lwd=.5 ) title(main="Respondent Home ZIP Codes by County") I am sure I am missing something basic re: the order in which the maps function plots items - but I can't seem to figure it out. Thanks for the help. Please let me know if you need any more information.

  Read the article

• DVD playback with Windows Media Player 11 works fine, but when copied to HDD and then played back, t

  - by stakx

  I have several DVDs with short documentaries on it. Since the notebook I'm using (a Dell Latitude E6400) has only one DVD drive, and I might play back those short movies very often, I thought of copying them to the HDD and playing them back from there. However, I've run into a problem, namely stuttering audio. Problem description: When I play back these movies directly from DVD (with Windows Media Player 11 under Windows Vista), everything works fine. Smooth video, no significant audio problems (only the occasional click). But as soon as I copy any of these DVDs to the HDD and try to play them back from there (e.g. using the wmpdvd://drive/title/chapter?contentdir=path protocol, I get stuttering audio — audio playback sounds like a machine gun for a third of a second or so, approx. every 8 seconds. I have tried converting the VOB files from the DVD to another format (ie. ripping), but that resulted in a noticeable downgrade of picture quality. Therefore I thought it best to keep the files in their original format, if possible. Still, I suspect that the stuttering audio is due to some (de-)muxing problem, and that changing the file format might help. (After all, video playback is fine; therefore I don't think that the hardware is too slow for playback.) Only thing is, I don't know how to convert the VOB files to another Windows Media Player-compatible format without quality loss. I hope someone can help me, or give me further pointers on things I could try out to get HDD playback to work without the problem described. Some things I've tried so far, without any success: VOB2MPG, in order to convert the .vob file to a .mpg file. But that changes only the A/V container, not the content. No re-encoding takes place at all. Re-encoding with MPlayer/MEncoder. Lots of quality loss there, and I frankly haven't got the time to test all possible settings combinations available. Disabling all plug-ins, equalizers, etc. in Windows Media Player. Disabling all hardware acceleration on the audio playback device. Further info on the VOB files I'm trying to playback: The video format is MPEG ES, PAL 720x576 pixels @ 24/25 frames per second. The sound stream is uncompressed PCM, 16-bit stereo @ 48kHz. (Might it help if I somehow re-encoded the sound stream at a lower resolution, or as an MP3? If so, how would I do this without changing the video stream?) P.S.: I am limited to using Windows Media Player (11). (I previously tried MPlayer btw., but the video playback quality was surprisingly bad.)

  Read the article

• How to better create stacked bar graphs with multiple variables from ggplot2?

  - by deoksu

  I often have to make stacked barplots to compare variables, and because I do all my stats in R, I prefer to do all my graphics in R with ggplot2. I would like to learn how to do two things: First, I would like to be able to add proper percentage tick marks for each variable rather than tick marks by count. Counts would be confusing, which is why I take out the axis labels completely. Second, there must be a simpler way to reorganize my data to make this happen. It seems like the sort of thing I should be able to do natively in ggplot2 with plyR, but the documentation for plyR is not very clear (and I have read both the ggplot2 book and the online plyR documentation. My best graph looks like this, the code to create it follows: the R code I use to get it is the following: library(epicalc) ### recode the variables to factors ### recode(c(int_newcoun, int_newneigh, int_neweur, int_newusa, int_neweco, int_newit, int_newen, int_newsp, int_newhr, int_newlit, int_newent, int_newrel, int_newhth, int_bapo, int_wopo, int_eupo, int_educ), c(1,2,3,4,5,6,7,8,9, NA), c('Very Interested','Somewhat Interested','Not Very Interested','Not At All interested',NA,NA,NA,NA,NA,NA)) ### Combine recoded variables to a common vector Interest1<-c(int_newcoun, int_newneigh, int_neweur, int_newusa, int_neweco, int_newit, int_newen, int_newsp, int_newhr, int_newlit, int_newent, int_newrel, int_newhth, int_bapo, int_wopo, int_eupo, int_educ) ### Create a second vector to label the first vector by original variable ### a1<-rep("News about Bangladesh", length(int_newcoun)) a2<-rep("Neighboring Countries", length(int_newneigh)) [...] a17<-rep("Education", length(int_educ)) Interest2<-c(a1, a2, a3, a4, a5, a6, a7, a8, a9, a10, a11, a12, a13, a14, a15, a16, a17) ### Create a Weighting vector of the proper length ### Interest.weight<-rep(weight, 17) ### Make and save a new data frame from the three vectors ### Interest.df<-cbind(Interest1, Interest2, Interest.weight) Interest.df<-as.data.frame(Interest.df) write.csv(Interest.df, 'C:\\Documents and Settings\\[name]\\Desktop\\Sweave\\InterestBangladesh.csv') ### Sort the factor levels to display properly ### Interest.df$Interest1<-relevel(Interest$Interest1, ref='Not Very Interested') Interest.df$Interest1<-relevel(Interest$Interest1, ref='Somewhat Interested') Interest.df$Interest1<-relevel(Interest$Interest1, ref='Very Interested') Interest.df$Interest2<-relevel(Interest$Interest2, ref='News about Bangladesh') Interest.df$Interest2<-relevel(Interest$Interest2, ref='Education') [...] Interest.df$Interest2<-relevel(Interest$Interest2, ref='European Politics') detach(Interest) attach(Interest) ### Finally create the graph in ggplot2 ### library(ggplot2) p<-ggplot(Interest, aes(Interest2, ..count..)) p<-p+geom_bar((aes(weight=Interest.weight, fill=Interest1))) p<-p+coord_flip() p<-p+scale_y_continuous("", breaks=NA) p<-p+scale_fill_manual(value = rev(brewer.pal(5, "Purples"))) p update_labels(p, list(fill='', x='', y='')) I'd very much appreciate any tips, tricks or hints. Thanks.

  Read the article

• imagick showing script url instead of image

  - by Raz

  Hi, currently i'm trying to use imagick to generate some images without saving them on the server and then outputting to the browser, my method of choice was image magic with the imagick extension for php. I read the documentation, and i'm sure the package is installed on my machine (windows xp, with xampp). the class is installed imagick module enabled imagick module version 2.0.0-alpha imagick classes Imagick, ImagickDraw, ImagickPixel, ImagickPixelIterator ImageMagick version ImageMagick 6.3.3 04/21/07 Q16 http://www.imagemagick.org ImageMagick release date 04/21/07 ImageMagick Number of supported formats: 164 ImageMagick Supported formats A, ART, AVI, AVS, B, BIE, BMP, BMP2, BMP3, C, CACHE, CAPTION, CIN, CIP, CLIP, CLIPBOARD, CMYK, CMYKA, CUR, CUT, DCM, DCX, DFONT, DPS, DPX, EMF, EPDF, EPI, EPS, EPS2, EPS3, EPSF, EPSI, EPT, EPT2, EPT3, FAX, FITS, FRACTAL, FTS, G, G3, GIF, GIF87, GRADIENT, GRAY, HISTOGRAM, HTM, HTML, ICB, ICO, ICON, INFO, JBG, JBIG, JNG, JP2, JPC, JPEG, JPG, JPX, K, LABEL, M, M2V, MAP, MAT, MATTE, MIFF, MNG, MONO, MPC, MPEG, MPG, MSL, MSVG, MTV, MVG, NULL, O, OTB, OTF, PAL, PALM, PAM, PATTERN, PBM, PCD, PCDS, PCL, PCT, PCX, PDB, PDF, PFA, PFB, PGM, PGX, PICON, PICT, PIX, PJPEG, PLASMA, PNG, PNG24, PNG32, PNG8, PNM, PPM, PREVIEW, PS, PS2, PS3, PSD, PTIF, PWP, R, RAS, RGB, RGBA, RGBO, RLA, RLE, SCR, SCT, SFW, SGI, SHTML, STEGANO, SUN, SVG, SVGZ, TEXT, TGA, THUMBNAIL, TIFF, TILE, TIM, TTC, TTF, TXT, UIL, UYVY, VDA, VICAR, VID, VIFF, VST, WBMP, WMF, WMFWIN32, WMZ, WPG, X, XBM, XC, XCF, XPM, XV, XWD, Y, YCbCr, YCbCrA, YUV this is from the phpinfo so i know i have it installed, the thing is when i try to generate an image and save it, it works flawlessly, but when i try to output the image directly, i get the script url as an image $draw = new ImagickDraw(); $draw->setFont('AnkeCalligraph.TTF'); $draw->setFontSize(52); $draw->annotation(110, 110, "Hello World!"); $draw->annotation(50, 220, "Hello World!"); $canvas = new Imagick('./pictures/test_live.PNG'); $canvas->drawImage($draw); $canvas->setImageFormat('png'); header("Content-Type: image/png"); echo $canvas; this is the code used. if i use writeimage, then the file on the server is created with no problems. does anyone have any ideas what i'm doing wrong ?

  Read the article

• Visiting the Fire Station in Coromandel

  Hm, I just tried to remember how we actually came up with this cool idea... but it's already too blurred and it doesn't really matter after all. Anyway, if I remember correctly (IIRC), it happened during one of the Linux meetups at Mugg & Bean, Bagatelle where Ajay and I brought our children along and we had a brief conversation about how cool it would be to check out one of the fire stations here in Mauritius. We both thought that it would be a great experience and adventure for the little ones. An idea takes shape And there we go, down the usual routine these... having an idea, checking out the options and discussing who's doing what. Except this time, it was all up to Ajay, and he did a fantastic job. End of August, he told me that he got in touch with one of his friends which actually works as a fire fighter at the station in Coromandel and that there could be an option to come and visit them (soon). A couple of days later - Confirmed! Be there, and in time... What time? Anyway, doesn't really matter... Everything was settled and arranged. I asked the kids on Friday afternoon if they might be interested to see the fire engines and what a fire fighter is doing. Of course, they were all in! Getting up early on Sunday morning isn't really a regular exercise for all of us but everything went smooth and after a short breakfast it was time to leave. Where are we going? Are we there yet? Now, we are in Bambous. Why do you go this way? The kids were so much into it. Absolutely amazing to see their excitement. Are we there yet? Well, we went through the sugar cane fields towards Chebel and then down into the industrial zone at Coromandel. Honestly, I had a clue where the fire station is located but having Google Maps in reach that shouldn't be a problem in case that we might get lost. But my worries were washed away when our children guided us... "There! Over there are the fire engines! We have to turn left, dad." - No comment, the kids were right! As we were there a little bit too early, we parked the car and the kids started to explore the area and outskirts of the fire station. Some minutes later, as if we had placed an order a unit of two cars had to go out for an alarm and the kids could witness them leaving as closely as possible. Sirens on and wow!!! Ladder truck L32 - MAN truck with Rosenbauer built-up and equipment by Metz Taking the tour Ajay arrived shortly after that and guided us finally inside the station to meet with his pal. The three guys were absolutely well-prepared and showed us around in the hall, explaining that there two units out at the moment. But the ladder truck (with max. 32m expandable height) was still around we all got a great insight into the technique and equipment on the vehicle. It was amazing to see all three kids listening to Mambo as give some figures about the truck and how the fire fighters are actually it. The children and 'our' fire fighters of the day had great fun with the various fire engines Absolutely fantastic that the children were allowed to experience this - we had so much fun! Ajay's son brought two of his toy fire engines along, shared them with ours, and they all played very well together. As a parent it was really amazing to see them at such an ease. Enough theory Shortly afterwards the ladder truck was moved outside, got stabilised and ready to go for 'real-life' exercising. With the additional equipment of safety helmets, security belts and so on, we all got a first-hand impression about how it could be as a fire-fighter. Actually, I was totally amazed by the curiousity and excitement of my BWE. She was really into it and asked lots of interesting questions - in general but also technical. And while our fighters were busy with Ajay and family, I gave her some more details and explanations about the truck, the expandable ladder, the safety cage at the top and other equipment available. Safety first! No exceptions and always be prepared for the worst case... Also, the equipped has been checked prior to excuse - This is your life saver... Hooked up and ready to go... ...of course not too high. This is just a demonstration - and 32 meters above ground isn't for everyone. Well, after that it was me that had the asking looks on me, and I finally revealed to the local fire fighters that I was in the auxiliary fire brigade, more precisely in the hazard department, for more than 10 years. So not a professional fire fighter but at least a passionate and educated one as them. Inside the station Our fire fighters really took their time to explain their daily job to kids, provided them access to operation seat on the ladder truck and how the truck cabin is actually equipped with the different radios and so on. It was really a great time. Later on we had a brief tour through the building itself, and again all of our questions were answered. We had great fun and started to joke about bits and pieces. For me it was also very interesting to see the comparison between the fire station here in Mauritius and the ones I have been to back in Germany. Amazing to see them completely captivated in the play - the children had lots of fun! Also, that there are currently ten fire stations all over the island, plus two additional but private ones at the airport and at the harbour. The newest one is actually down in Black River on the west coast because the time from Quatre Bornes takes too long to have any chance of an effective alarm at all. IMHO, a very good decision as time is the most important factor in getting fire incidents under control. After all it was great experience for all of us, especially for the children to see and understand that their toy trucks are only copies of the real thing and that the job of a (professional) fire fighter is very important in our society. Don't forget that those guys run into the danger zone while you're trying to get away from it as much as possible. Another unit just came back from a grass fire - and shortly after they went out again. No time to rest, too much to do! Mauritian Fire Fighters now and (maybe) in the future... Thank you! It was an honour to be around! Thank you to Ajay for organising and arranging this Sunday morning event, and of course of Big Thank You to the three guys that took some time off to have us at the Fire Station in Coromandel and guide us through their daily job! And remember to call 115 in case of emergencies!

  Read the article

• CodePlex Daily Summary for Thursday, February 18, 2010

  CodePlex Daily Summary for Thursday, February 18, 2010New ProjectsASP .NET MVC CMS (Content Management System): Open source Content management system based on ASP.NET MVC platform.AutoFolders: AutoFolders package for Umbraco CMS This package auto creates folder structures for new and existing pages. The folders structures can be date bas...AutoPex: This project combines CCI with Pex by allowing the developer to run Pex on methods based on differences between two assemblies. Canvas VSDOC Intellisense: JavaScript VSDOC documentation for HTML5 Canvas element and 2d Context interface.CSUDH: California State University, Domguiez Hills Game projectsD-AMPS: System for Analysis of Microelectronic and Photonic StructuresDispX: Disease PredictorEmployee Info Starter Kit: This is a starter kit, which includes very simple user requirements, where we can create, read, update and delete (crud) the employee info of a com...Enhanced Discussion Board for SharePoint: Provide later... publishing project to share with Malaysians firstFlowPad: Flowpad is a light, fast and easy to use flow diagram editor. It helps you quickly pour your algorithms from your mind to 'paper'. It is written us...Henge3D Physics Library for XNA: Henge3D is a 3D physics library written in C# for XNA. It is implemented entirely in managed code and is compatible with the XBOX 360.Hybrid Windows Service: Abstracted design pattern for running a windows service interactively. Implemented as a base class to replace ServiceBase it will automatically pro...Image Cropper datatype for Umbraco: Stand alone version of the Image Cropper datatype in Umbraco. Listinator: A social wishlist application done in asp.net MVCMicrosoft Dynamics Ax User Group (AXUG) Code Repository: The goal of this project is to make it easier for customers of Microsoft Dynamics Ax to be able to share relevant source code. Code base should inc...Mobil Trials: Sebuah game sederhana yang dibuat di atas Silverlight 3.0 dengan bantuan Physics Helper 3.0 Demo : http://gameagam.co.cc/default.html Mirror link...NavigateTo Providers: This project is a collection of NavigateTo providers for Visual Studio 2010. NExtLib: NExtLib is a general-purpose extension library for .NET, which adds some useful features and addresses some alleged omissions.Nom - .NET object-mapper: Nom is a light-weight, storage-type agnostic persistence framework which is intended to provide an abstraction over both relational and non-relatio...Numerical Methods on Silverlight: Numerical Methods, Silverlight, Math Parser, Simple, EulerOpenGLViewController for Visual Basic .NET 2008: A single class in pure VB.NET code to create and control an OpenGL window by calling opengl32.dll directly without use of additional wrapper librar...RestaurantMIS: RestaurantMIS is a simple Restaurant management system developed in Visual C# 2008 with Chinese language.SmartKonnect: <project name>A WPF application for windows with shoutcast, twitter, facebook and etc.SSRS Excel file Sheet rename: SSRS wont support renaming excel reports sheet rename. This program support to generate the report and change the excel sheet nameSWENTRIZ.NET: SWENTRIZ.NET allows to build graphics of implicit functions via .NET functionality.TFT: Tropical forecast tracker is a web application. It will measure the error of the National Hurricane Center's forecast as compared to the actual tr...WCF Dynamic Client Proxy: A WCF Dynamic Client Proxy so you don't have to inherit from ClientBase all the time. The proxy also has fault tolerance so you don't have to dispo...Web.Config Role Provider: Stores ASP.NET Roles in web.config. Easy to set up and deploy. Works great for simple websites with authentication. The projects includes support ...WPF Line of Business App: Example WPF patterns for line of business applications. Includes navigation, animation, and visualization.YuBiS Framework: Silverlight and WF based a workflow RAD framework. New ReleasesASP .NET MVC CMS (Content Management System): AtomicCms 1.0: This is the first public release of AtomicCms. To get more information about this content management system, visit website http://atomiccms.com/Blogsprajeesh.Blogspot samples: Designing Modular Smart Clients using CAL: This whitepaper provides architectural guidance for designing and implementing enterprise WPF/ silverlight client applications based on the Composi...DB Ghost Build Tools: 1.0.2: Made a change to the datetime format per dewee.DotNetNuke® Community Edition: 05.02.03: Major HighlightsFixed the issue where LinkClick.aspx links were incorrect for child portals Fixed the issue with the PayPal URL settings. Fixed...Employee Directory webpart for sharepoint 2007 user profiles: Employee Directory Source V2.0: Features: 1. Displays a complete list of all Active Directory profiles imported by the SSP into SharePoint 2007. 2. Displays the following fields ...Enhanced Discussion Board for SharePoint: Alpha Release: Meant for those who attended my presentation. Not cleaned upESPEHA: Espeha 9 PFR: Some small issues fixedFlowPad: FlowPad 0.1: FlowPad 0.1 build. Run it to get fammiliar with major concepts of easy diagramming :)Fluent Ribbon Control Suite: Fluent Ribbon Control Suite BETA2: Fluent Ribbon Control Suite BETA2 Includes: - Fluent.dll (with .pdb and .xml) - Demo Application - Samples - Foundation (Tabs, Groups, Contextu...Henge3D Physics Library for XNA: Henge3D Source (2010-02): This is the initial 2010-02 release.Highlight: Highlight 2.5: This release is primarily a maintenance release of the library and is functionally equivalent to version 2.3 that was released in 2004.Magiq: Magiq 0.3.0: Magiq 0.3.0 contains: Magiq-to-objects: Full support to Linq-to-objects Magiq-to-sql: Full support to Linq-to-sql New features: Plugin model Bu...Microsoft Points Converter: Pre-Alpha ClickOnce Installer v0.03: This release builds on the 0.02 release by adding more thorough validation checks for the amount to convert from as well as adding several currency...Mobil Trials: Mobil Trials Source Code: Sebuah game sederhana yang dibuat di atas Silverlight 3.0 dengan bantuan Physics Helper 3.0 Game ini masih perlu dikembangkan lebih jauh lagi! Si...Numerical Methods on Silverlight: Numerical Methods on Silverlight 1.00: This a new version of Numerical Methods on Silverlight.OAuthLib: OAuthLib (1.5.0.0): Changed point is as next. 7037 Fix spell miss of RequestFactoryMedthodSharePoint Outlook Connector: Version 1.0.1.0: Now it supports simply attaching SharePoint documents feature.Sharpy: Sharpy 1.1 Alpha: This is the second Sharpy release. Only a single change has been made - the foreach function now uses IEnumerable as a source instead of IList. Th...SkinDroidCreator: SkinDroidCreator ALPHA 1: Primera releaseTan solo carga mapas, ya sea de un zip o de un directorio. Para probarlo se pueden cargar temas Metamorph o temas flasheables, ya se...SkyDrive .Net API Client: SkyDrive .Net API Client 0.8.9: SkyDrive .Net API Client assembly version 0.8.9. Changes/improvements: - Added Web Proxy support - Introduced WebDriveInfo - Introduced DownloadUrl...spikes: Salient.Web.Administration 1.0: WebAdmin is simply the built in ASP.NetWebAdministrationFiles application cleaned up with codebehinds to make customization and refactoring possibl...SSRS Excel file Sheet rename: Change SSRS excel file sheet name: Create stored procedure from the attached file in sql server 2005/2008SWENTRIZ.NET: Approach 1: First approachTortoiseSVN Addin for Visual Studio: TortoiseSVN Addin 1.0.4: Visual Studio 2005 support Custom working root bug fixingTotal Commander SkyDrive File System Plugin (.wfx): Total Commander SkyDrive File System Plugin 0.8.4: Total Commander SkyDrive File System Plugin version 0.8.4. Bug fixes: - Upgraded SkyDriveWebClient to version 0.8.9 Please do not forget to expres...UnOfficial AW Wrapper dot Net: UAWW.Net 0.1.5.85 Béta 2: Fixed and Added SomethingVr30 OS: Space Brick Break 1.1: A brick breaker. ADD Level 3, 4, 5Web.Config Role Provider: First release: Three downloads are available: A compiled dll ready to use. The schema to enable intellisense The complete source (zipped)WI Assistant: WI Assistant 2.1: This release improves the work item selection functionality. These selection methods are now supported (some require at least one item selected): ...WI Assistant: WI Assistant 2.2: Improved error handling and fix for linking several times in a row. DISCLAIMER: While I have tested this app on my TFS Server, by downloading and...ZipStorer - A Pure C# Class to Store Files in Zip: ZipStorer 2.30: Added stream-oriented methods Improved support for ePUB & Open Container Format specification (OCF) Automatic switch from Deflate to Store algo...Most Popular ProjectsRawrDotNetNuke® Community EditionASP.NET Ajax LibraryFacebook Developer ToolkitWindows 7 USB/DVD Download ToolWSPBuilder (SharePoint WSP tool)Virtual Router - Wifi Hot Spot for Windows 7 / 2008 R2Json.NETPerformance Analysis of Logs (PAL) ToolQuickGraph, Graph Data Structures And Algorithms for .NetMost Active ProjectsDinnerNow.netRawrSharpyBlogEngine.NETSimple SavantjQuery Library for SharePoint Web ServicesNB_Store - Free DotNetNuke Ecommerce Catalog Modulepatterns & practices – Enterprise LibraryPHPExcelFacebook Developer Toolkit

  Read the article

< Previous Page | 1 2 3 4 5 6  | Next Page >