Search Results

Search found 12899 results on 516 pages for 'usb boot'.

Page 5/516 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • `power/persist` file not found in USB device sysfs directory

    - by intuited
    The file /usr/share/doc/linux-doc/usb/persist.txt.gz mentions that the USB-persist capability can be enabled for a given USB device by writing 1 to the file persist in that device's directory in /sys/bus/usb/devices/$device/power. This is said — if I understood correctly — to allow mountings of volumes on the drive to persist across power loss during suspend. However, I've discovered that the device I'd like to enable this facility for — a USB hard drive — does not have such a file in its corresponding directory, and that attempts to create it are rebuffed. Is there perhaps a kernel module that needs to be loaded for this to work? Do I need to build a custom kernel? I'm running ubuntu 10.10.

    Read the article

  • 'Invalid or corrupt kernel image' error while booting from USB stick

    - by steve
    I got the Ubuntu 11.10 32-bit edition and i used Unetbootin to write the ISO to a usb stick.After that i tried to boot from the stick,having changed the BIOS boot settings,and when the first interface shows up with the choices of istallation,whatever choice i select i got the message"invalid or corrupt kernel image".I use a netbook with windows 7 on it.I tried different usb sticks but same again.I also tried Universal USB installer instead of Unetbootin but same again.Any idea of what happens?I am using ASUS 1000H.The USB doesn't work in one more PC i tried to,but i also tried a second USB to both of the two computers and same again. I downloaded the ISO image once again and follow the same procedure but same again

    Read the article

  • Save to Hard Drive instead of bootable USB

    - by WAM
    I followed the instructions on the Ubuntu website on how to put Ubuntu 12.04 on a USB and make it a bootable USB stick for windows. It worked fine and I can boot up and run Ubuntu, but every time I try to download software or change settings it tries to save it to the USB rather than the hard drive built into the computer. The USB doesn't have enough space so the download fails and in addition it doesn't retain setting changes so when I restart my computer all the settings return to default and anything I saved is gone. Is there any way to change things so that when I download software or change settings Ubuntu will save it to my hard drive instead of the USB?

    Read the article

  • Pendrive USB Ubuntu installation - black screen on boot

    - by ubuntico
    I see many posts on this, but no solution. I installed Ubuntu 12.04 on my 16GB USB flash drive using this official link using their tool Universal USB Installer. Installation to USB went fine so I set my laptop to boot from USB and the Ubuntu was recognized. I saw the usual boot screen and I chose option "Run Ubuntu from this USB". The boot process started and after 5-6 seconds the screen goes black and non-responsive. I thought that it hang on X loading so I tried switching to console via Ctrl+Alt+F1-6 but the system did not respond. Why is this happening? Am I doing something wrong? PS. My laptop is HP Pavillion G6

    Read the article

  • USB blocks suspend on a Gigabyte GA-890GPA-UD3H with ATI SB700/SB800

    - by poolie
    Following on from question 12397, I'd still like to get suspend working on my Phenom II X6 / GA-890GPA desktop machine running current Maverick. When I run pmi action suspend the machine doesn't crash, but it also doesn't suspend. The kernel logs show: PM: Syncing filesystems ... done. PM: Preparing system for mem sleep Freezing user space processes ... (elapsed 0.02 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. PM: Entering mem sleep Suspending console(s) (use no_console_suspend to debug) pm_op(): usb_dev_suspend+0x0/0x20 returns -2 PM: Device usb8 failed to suspend async: error -2 PM: Some devices failed to suspend PM: resume of devices complete after 0.430 msecs PM: resume devices took 0.000 seconds PM: Finishing wakeup. Restarting tasks ... done. PM: Syncing filesystems ... I've tried disconnecting all the USB devices, and then connecting in to run pmi over ssh, and I get the same failure. With everything unplugged, I see the following usb devices: Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub and lspci shows the physical devices are: 00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller 00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller 00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller 00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller 00:14.5 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller 00:16.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller 00:16.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller 02:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) Booting with no_console_suspend makes no difference.

    Read the article

  • Chainload boot of Ubuntu installed on 32GB SD card from legacy Grub boot on USB

    - by Gary Darsey
    I have Ubuntu installed on a 32 GB SD card (in the Storage Expansion slot on an Acer Aspire One) with Grub2 installed in the same partition. I boot into legacy Grub on a USB drive and would like to boot by chainloading Grub2 from Grub (kernel/initrd or symlink booting would also be fine), but I haven't figured out how to do this from legacy Grub CLI. Output from blkid for this partition is /dev/mmcblk0p1: LABEL="Ubuntu" UUID="7ceb9fa7-238c-4c5d-bb8e-2c655652ddec" TYPE='ext4" / fdisk -lu information Boot indicator ID 83. Related entries in grub.cfg: search --no-floppy --fs-uuid --set-root 7ceb9fa7-238c-4c5d-bb8e-2c655652ddec linux /boot/vmlinuz-3.5.0-17-generic root=UUID=7ceb9fa7-238c-4c5d-bb8e-2c655652ddec... initrd /boot/initrd.img-3.5.0-17-generic I can't seem to replicate this in legacy Grub. Is there any way get Grub2 to chainload? How do I set root with UUID in legacy Grub? I prefer to boot from USB. Would Grub2 on USB (copying the grub.cfg generated during installation) be an option?

    Read the article

  • Can't boot WIndows 7 CD installer after installing ubuntu Boot-repair failed please help

    - by user293164
    An error occurred during the repair. Please write on a paper the following URL: http://paste.ubuntu.com/7638031/ In case you still experience boot problem, indicate this URL to: boot[email protected] You can now reboot your computer. The boot files of [The OS now in use - Ubuntu 14.04 LTS] are far from the start of the disk. Your BIOS may not detect them. You may want to retry after creating a /boot partition (EXT4, 200MB, start of the disk). This can be performed via tools such as gParted. Then select this partition via the [Separate /boot partition:] option of [Boot Repair]. (https://help.ubuntu.com/community/BootPartition I really don't know what to do.. :(

    Read the article

  • Add an entry for Ubuntu on Windows 8 boot loader

    - by John
    I have installed Ubuntu 12.10 by creating free space in Windows 8 and then using that space to create 3 partitions, one for SWAP, one for GRUB (mounting point is /boot) and one for the actual OS. I did this so the Windows 8 boot loader wouldn't be overwritten in case I ever wanted to remove Ubuntu. I can still boot into Ubuntu if I select the boot loader from the BIOS. I want to add Ubuntu to the Windows 8 boot loader and I've been told to use EasyBCD. The issue with that is it doesn't actually direct Windows to the GRUB file, but rather to something like autogrub0.mri. I have found another programme called Visual BCD which will allow me to actually set the bootloader paths and drives. From here, I don't quite know what to do. I believe I have it set to the correct drive but I don't know if I'm directing to the right file. I think it's /boot/grub/x86_64-efi/grub.efi. I don't know if that's the right file, if I need to remove /boot or if the / need to be \ as that's what Windows uses. Sorry for such a lengthy post, please help!

    Read the article

  • Will BIOS boot mode Ubuntu install be able to boot when firmware "Fast Boot" is "Ultra Fast"?

    - by Pro Backup
    I have an AsRock mainboard with UEFI BIOS P1.50 02/14/2014. The firmware "Fast Boot" option is set to "Fast", Boot Option #1 is set to "AHCI P4: OCZ-VERT...": this is BIOS not UEFI boot. This boot disk has an MBR partitioning scheme (# parted -l | grep Partition\ Table:). Therefore Ubuntu 14.04 is installed in BIOS/CMS (Grub-PC) mode. The Ubuntu boot process ends in a text console (no GUI). There is no external graphics card in use. The stock Ubuntu kernel is replaced with Ubuntu supplied mainline 3.16.0-031600rc6-generic. dmesg outputs lines containing BIOS, like: SMBIOS 2.7 present Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored BIOS EDD facility v0.16 2004-Jun-25, 0 devices found The ASRock BIOS it selves display this help text for "Ultra Fast - Fast Boot": Ultra Fast mode is only supported by Windows 8 and the VBIOS must support UEFI GOP if you are using an external graphics card. Please notice that Ultra Fast mode will boot so fast that the only way to enter this UEFI Setup Utility is to Clear CMOS or run the Restart to UEFI utility in Windows. Assumptions: I suspect after changing UEFI setting "Fast Boot" to "Ultra Fast" that the machine will no longer boot into Ubuntu's console. I expect when first exchanging "Grub-pc" with "Grub-efi", that the machine will still be able to boot to a grub menu (thus allowing to change the "Fast Boot" setting back to "Fast" without clearing CMOS). Are these two "Fast Boot" assumptions correct, and/or, may I expect Ubuntu 14.04 running mainline kernel 3.16rc6 and Grub-efi to still boot to console after enabling UEFI Ultra Fast Boot?

    Read the article

  • Unstable after moving headless server from usb-hdd to usb pendrive

    - by nlee
    Ubuntu server 12.04.1 running from usb-hdd is rock solid for months. After copying the partitions to a Kingston usb pendrive the system will only run for 3-4 days before some services fail. Is running 12.04.1 from usb pendrive a viable approach? How do I troubleshoot the problem? In the meanwhile, I have reverted back to usb-hdd. Willing to buy a usb pendrive that is known to work. Recommendations?

    Read the article

  • Connecting 2 PCs using USB-to-USB (male-male) cable

    - by Amirizzuan
    I found this while Googling around: http://www.hardwaresecrets.com/article/Connecting-Two-PCs-Using-a-USB-USB-Cable/248 But then, the solution given in the article is using Windows. Is there any Ubuntu equivalent to this? I would really love to SSH into my Ubuntu server via my Ubuntu laptop, just by connecting one end of the male USB to my laptop, and another end of the male USB to my server. I know I can always SSH into my server via the network, but then in this case of mine, there are cases the server is inside a secluded-secured network server room, and the only way for me to check things out is to go into the server room and open the keyboard console and monitor there. But, if I can just bring my laptop inside and connect to the USB there, then that would be cool. Any idea guys?

    Read the article

  • USB 3.0 hard disk not detected on a particular host controller?

    - by Alvin Wong
    I have a USB 3.0 hard disk which has always been working on my desktop with an XHCI. Now I just bought a notebook with an XHCI (something with Intel's Ivy Bridge setup). The first time I plug the hard disk in its 3.0 port it is detected and working. A few hours later I try to connect it again, but seems that the notebook just ignored it! The light on the hard disk didn't blink as usual (instead it is hold at on). I then tested it with my desktop again and it is working perfectly. It gets trickier when I plug it in the USB 2.0 port of that notebook it is detected and working perfectly (despite the slower speed). Then I try to plug in an USB 2.0 USB flash drive to that USB 3.0 port, and it is detected (of course as USB 2.0). So, there are two USB 3.0 ports on my notebook's XHCI. Both of them are not working with my hard disk but working perfectly fine with my USB 2.0 UFD. What's wrong with it? When I plug in the hard disk, device manager doesn't change. I've tried re-installing the driver for the XHCI, but it changes nothing. Had I broke the USB 3.0-specific pins of both USB 3.0 ports?

    Read the article

  • USB drives not recognized all of a sudden (usb_storage not loaded lsmod does not report usb_storage)

    - by Siddharth
    I have tried most of the advice on askubuntu and other sites, usb_storage enable to fdisk -l. But I am unable to find steps to get it working again. sudo lsusb results Bus.... skipped 4 lines Bus 004 Device 002: ID 413c:3012 Dell Computer Corp. Optical Wheel Mouse Bus 005 Device 002: ID 413c:2105 Dell Computer Corp. Model L100 Keyboard Bus 001 Device 005: ID 8564:1000 sudo dmseg | tail reports [ 69.567948] usb 1-4: USB disconnect, device number 4 [ 74.084041] usb 1-6: new high-speed USB device number 5 using ehci_hcd [ 74.240484] Initializing USB Mass Storage driver... [ 74.256033] scsi5 : usb-storage 1-6:1.0 [ 74.256145] usbcore: registered new interface driver usb-storage [ 74.256147] USB Mass Storage support registered. [ 74.257290] usbcore: deregistering interface driver usb-storage fdisk -l reports Device Boot Start End Blocks Id System /dev/sda1 * 2048 972656639 486327296 83 Linux /dev/sda2 972658686 976771071 2056193 5 Extended /dev/sda5 972658688 976771071 2056192 82 Linux swap / Solaris I think I need steps to install and get usb_storage module working. Edit : I tried sudo modprobe -v usb-storage reports sudo modprobe -v usb-storage insmod /lib/modules/3.2.0-48-generic-pae/kernel/drivers/usb/storage/usb-storage.ko Edit : jsiddharth@siddharth-desktop:~$ sudo udevadm monitor --udev monitor will print the received events for: UDEV - the event which udev sends out after rule processing UDEV [4757.144372] add /module/usb_storage (module) UDEV [4757.146558] remove /module/usb_storage (module) UDEV [4757.148707] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6 (usb) UDEV [4757.149699] add /bus/usb/drivers/usb-storage (drivers) UDEV [4757.151214] remove /bus/usb/drivers/usb-storage (drivers) UDEV [4757.156873] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0 (usb) UDEV [4757.160903] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9 (scsi) UDEV [4757.164672] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9/scsi_host/host9 (scsi_host) UDEV [4757.165163] remove /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9/scsi_host/host9 (scsi_host) UDEV [4757.165440] remove /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9 (scsi) Narrowing down more : Seems like I need usb_storage to load as a module jsiddharth@siddharth-desktop:~$ lsmod | grep usb usbserial 37201 0 usbhid 41937 0 hid 77428 1 usbhid Still no usb driver mounted. Nor does a device show up in /dev. Any step by step process to debug and fix this will be really helpful.

    Read the article

  • USB-to-Parallel adapter rated as USB 1.1 - will its driver lower speed of USB 2.0 bus?

    - by cumminjm
    I need to connect a printer with a parallel port to a computer with only a USB 2.0 bus. I'd like to do so without lowering the USB 2.0 bus speed to USB 1.1. All the USB-to-Parallel adapter cable found so far seem to be rated as USB 1.1 and they come with a CD which presumably contains a necessary driver. I haven't purchased one and tested it out yet, but if so, would the cable's driver lower speed of USB 2.0 bus?

    Read the article

  • USB Hub vs. Dockinstation USB vs. Laptop USB

    - by Will
    I recently had thougts about my current setup in my office, especially about the UBS ports distribution. Here's my setup: I have a Lenovo T410 docked to a Lenovo Dockingstation Series 3, that providey me with 6 USB ports, which I use all (3 ext. drives, mouse, keyboard, USB Hub of monitor). The USB hub on my ext. monitor (most probably powered by the ext. monitor's power supply) provides me with 2 USB ports, where I use one for my webcam and another for USB sticks. On my T410 itself I have 4 USB slots, that are usually not used, as don't want to mess with USB plugs when undocking my laptop, now and then I plug my printer on one of these, just because I don't have any UBS ports left. Now I'm wondering how fast each of these slots are: I assume that all the 6 USB ports from the dockinstation somehow go through the docking connector on the bottom of my laptop. Does this connector has such a big bandwidth for all these 6 USB ports to perform like if they were dedicated ports as the 4 ones on my laptop? Also how is generally the performance of USB hubs (like the one on my ext. monitor?)?

    Read the article

  • How to fix GRUB on dualboot with Windows7 and Ubuntu?

    - by b_oliv
    I am a relatively recent user of Linux. I had several releases of Ubuntu installed on my laptop working in dual-boot and never had any issues. Recently, I installed openSUSE because I thought it would be necessary for an assignment at my university. It turns out it wasn't so I returned to Ubuntu and decided to burn the new .iso to a CD and install it. The problem is that during installation process I almost for sure messed up with the partitions and now, whenever I tried to load Windows 7, it will tells me that a required device is inaccessible. So, I reinstalled Ubuntu again and now all I get is that I am redirected to the GRUB menu without any warnings. I tried creating a Windows Recovery Disk but it gives me Unexpected I/O error. I suspect it is because it was downloaded from the Internet and maybe some files weren't there. I tried everything without success, so I decided to ask here, in the hope I can receive some help and also learn how to help others with it in the future. Here it is my boot info summary: http://paste.ubuntu.com/1344990/ Also, I might add, that on the boot-repair advanced options, the box repair Windows boot files is "locked", so I can't check it. EDIT: Apparentely, the box is locked, because, from what I understood after reading the boot-repair information, everything is fine with my windows boot-files... I still need some guidance though

    Read the article

  • Ubuntu USB boot failure

    - by Steve
    When trying to boot from a boot USB drive I got the message, "Vesamenu.c32:Not a com32r image." I was trying to boot a fairly new Toshiba laptop with a Ubuntu 10.04.2 LTS created USB boot. I re-created the USB drive with 11.04 and it booted fine. These were both 32 bit versions even though the laptop is a 64 bit. I was trying to create a generic boot USB that would work on everything I might try it on. What is the consensus on this idea? Any solution to the above error? Thanks from a noobe.

    Read the article

  • Can't boot without Flash Drive plugged in

    - by vlad
    (Sorry for my bad English) I had Ubuntu 12.04 Beta installed on my computer. When 12.04 was finally released, I made a bootable USB Flash Drive using Startup Disk Creator. Then I decided to check if this drive works properly and to reinstall the system on my desktop. I must add, my desktop behaves a bit strange when it comes to bootable USB's, it recognizes them as HDD. In BIOS I changed priority of boot so USB Flash Drive (recognized as HDD) was first. Successfully booted, I installed Ubuntu. Everything worked fine, but... Now I cannot boot from my real HDD. Every time I want to boot, I put the USB Flash Drive into my computer, boot, safely remove it and everything works. What have I to do, to repair boot? Thank you for your time!

    Read the article

  • Ubuntu on USB does not boot on MacBook

    - by Sean H
    Ubuntu is installed on a 32 gigabyte flash-drive and it successfully booted every time up until I partitioned my hard-drive and installed Windows as a secondary boot (for programming reasons). Now every time I attempt to boot the Ubuntu flash-drive it boots into Windows XP. The same goes for partitions, I partitioned my hard-drive and installed Ubuntu and it only booted Windows XP. I am on a MacBook 6,1 with Mac OS X 10.6.8, 2 partitions, and I am using ReFit as my boot-loader. EDIT: I had Ubuntu working fine from FLASH DRIVE and at one point as a partition. I later uninstalled Ubuntu from my hard-drive and installed Windows. I then had to re-image my computer for certain reasons and I installed windows. Now when I attempt to boot anything other than Windows or OS X it boots into windows. Ubuntu was never on my hard drive while Ubuntu was on it. The flash-drive has been its own thing and has the boot-loader installed to it and loads from ReFit but boots into windows.

    Read the article

  • Wont boot from USB, stops at SYSLINUX copyright

    - by Steve
    Created bootable 11.10 in Windows from Universal USB Installer 1.8.6.8, upon boot in my HP Mini Netbook it displays only this: SYSLINUX 4.04 EDD 2011-04-18 Copyright (C) 1994-2011 H. Peter Anvin et al _(Blinky Cursor) I tried removing "ui" from syslinux.cfg, no change... (Re: can't install with usb pen drive, SYSLINUX problem) I also tried creating a bootable USB using unetbootin-windows-563, no change. Does anybody have any other ideas?

    Read the article

  • Control which os is booted on multi-boot system

    - by mooware
    I am setting up a server with multiple operating systems for the automatic testruns of my company's product. I'd like to be able to control with a script which OS boots up after a restart, so I could say for example "after the windows run, boot into linux". I thought of using the windows bootloader for all OSes, because it should be easy to just change the default entry in C:\boot.ini to whichever system I want to boot. Is this a feasible way of doing this? Are there better options?

    Read the article

  • Ubuntu not booting from USB on laptop (no optical drive)

    - by Jamie
    I'm using a Kingston 16GB USB, with the Unetbootin program. (I've tried both downloading the installation iso manually and adding it, or using the program to download.) I've tried creating the bootable USB on an iMac, the laptop and also a desktop. I've booted into the setup of the laptop and changed the boot order to make sure it boots from that drive first. (There is no optical drive so that isn't a problem.) It's an Acer Aspire AS3810TZ. Upon booting it gives this message: SYSLINUX 4.03 2010-10-22 EDD Copyright (C) 1994-2010 H. Peter Anvin et al I get this no matter how I create the USB, it just sits there. I left the laptop for an hour and it hadn't moved. I've also tried on a different 4GB USB (Generic) and that did the same.

    Read the article

  • Cannot boot from Ubuntu USB

    - by Safi
    I create a ubuntu 10.10 bootable USB via the method that is described on the download page of ubuntu. I made that from windows and also from ubuntu 10.04 (I have dual boot). When I boot from the USB made, the menu shows and when I run it, it gives a beep and nothing else. It never boots. USB creation from both methods result the same. I downloaded ubuntu via the torrent provided from Ubuntu. Any help will be very appreciated. I want to make my USB just like a Live CD so that I can run it on some other computers also.

    Read the article

  • Stuck at boot, both with wubi and USB

    - by Christoffer
    I have tried installing Ubuntu 12.04 through USB and with wubi interface. Nothing works. With USB, I will enter the main menu, doesn't matter what i choose, "install ubuntu on a hard drive" or "boot into ubuntu from USB". When I click on one of those it will scan my drives or something, and when it gets to the USB it gets stuck. It just stays there.... With wubi, the install goes fine, but when trying to boot for the first time to ubuntu it says "completing ubuntu installation"... NOTHING more happens, that cursor only blinks there. How can I get Ubuntu to work??? I got: 1TB HDD, 256GB HDD, 80GB SSD. I'm trying to install Ubuntu on my 256 GB HDD....

    Read the article

  • Can't boot into windows7/ubuntu 12.04 after running boot-repair

    - by Rini
    I have installed Ubuntu 12.04 on my preinstalled windows 7 Sony vaio E series laptop following instructions here: http://www.linuxbsdos.com/2012/05/17/how-to-dual-boot-ubuntu-12-04-and-windows-7/ Everything went well and I am able to boot in to windows after complete installation of Ubuntu. Now following instructions on web I tried to add Ubuntu to my BIOS using Easy BCD (but forget to add windows 7 entry). As a result, I loose windows 7 OS and can't boot in to either OS then I successfully repaired windows 7 using recovery CD. Now my problem is that I can't reinstall Ubuntu 12.04 using Live CD it halts every time before disk partition step giving error. "ubi-partman crashed". "ubi-partman failed with exit code 141. further information may be found in /var/log/syslog. Do you want to try running this step again before continuing? If you do not, your installation may fail entirely or may be broken." and, any choice to continue will result in the same error. After that following some post solutions I ran boot-repair commands in terminal ( in Try Ubuntu mode) and got the following URL: http://paste.ubuntu.com/1206434/ Now, after restart I can't boot into either Windows or Ubuntu. Even any attempt to run Windows repair is failed and I got the message : 'No operating System found' I don't know what went wrong after running boot-repair command. Please help in solving this issue. Thanks and Regards, R Shukla

    Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >