Search Results

Search found 15386 results on 616 pages for 'usb port'.

Page 5/616 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • USB port causing device problems after new motherboard upgrade

    - by enbuyukfener
    I'm looking into a PC with an issue with one of the front USB ports (perhaps both). It was working before a motherboard upgrade but since then, a USB drive was inserted, overheated and does not appear to be working. Then a phone (with USB charging) was plugged in, and the phone OS suspended. Removing and re-inserting the battery led to the phone (and hence battery) working, however the battery no longer charges (including with a wall charger). It seems too much to be a coincidence and am wondering what the issue may be? Ideas so far are short circuiting, or over-current to the USB ports. Note: Did not occur to me, so details are not 100% accurate or complete. Feel free to ask for missing info that I may have forgotten though.

    Read the article

  • USB port not working

    - by sharza
    Everytime I put pendrive in the USB port(all ports in my computer) it doesnt work especially when plug the USB Flash Drive, but after several hours it work again. But When I try to open this pen drive data on other computers, I'm able to open & work ... So definitely there is no problem with my pen drive. and I've enabled USB keyboard & mouse in Bios. I using windows xp and using USB 2.0 Please help ...

    Read the article

  • How do I execute a file from a FAT USB drive?

    - by Derek Redfern
    I'm trying to install a portable app onto my USB drive such that it is compatible with both Ubuntu and Windows (specifically, a program called eToys). Support is already built into the app for both operating systems - there's etoys.sh for Ubuntu and etoys.exe for Windows. I decided to install onto a FAT drive since that can be read from both systems. This works fine for Windows, but for some reason I cannot execute etoys.sh on Ubuntu. The problem is not with the file - when the whole folder is copied to the local hard drive, the app works great in Ubuntu. But when I try to execute it from the USB, it opens the file in a text editor. I then tried running it from a terminal, but I got the message "Permission denied." I've had the same problem with other executables as well. Is there an easy way to execute things from a USB stick? Thanks! -- Derek

    Read the article

  • What is the difference between installing Ubuntu on a USB device and a laptop hardisk? [duplicate]

    - by Max
    This question already has an answer here: Difference between LiveCD, LiveUSB, full-install, and persistence? 1 answer Now, I have a laptop with Windows 8. For various reasons, I want to install Ubuntu that I can carry with me on the various PCs I work with. The same installation so that I don't have to constantly take care of installing new things and dependencies. Can I do a full installation of Ubuntu in a USB? Can I install softwares and other things in the USB itself so that I can boot it anywhere I want? What is the difference of this installation from full installation on a laptop harddisk? What features will and will not work with the USB option? Thanks!

    Read the article

  • USB 2.0 Options for board with USB 1.1

    - by Wesley
    Hi all, I have a QDI Superb 4 board and, by default, it supports USB 1.1. However, I want it to support USB 2.0. How can I go about doing this? I know there are PCI expansion cards with USB 2.0 and there are also 3.5" floppy replacement panels with USB 2.0. Will these be supported by the board or will it be downgraded to USB 1.1? If so, are there better options than those already mentioned? Thanks in advance.

    Read the article

  • Unable to view USB stick/drive contents

    - by Harshit Sachdeva
    So, I plug-in my USB stick, copy a file from the hard drive to the USB stick, and safely remove the USB stick. I then plug out the USB stick. When I plug the USB stick back into the computer again, the previous contents of the USB stick are all gone. It shows an empty drive. I am using Windows XP SP 2 with an 8 GB USB stick from Transcend.

    Read the article

  • Port forwarding to asp.net development server

    - by ile
    I have configured my router so that I can access my localhost from internet. But I can't manage to port forward it to asp.net development server. In router's port forwarding I did the same thing as for the localhost but only changed port number so that it is the same as the one that is assigned to my application, but this doesn't work. Any idea how to get it work? Thanks in advance, Ile

    Read the article

  • 3G USB Modem Not Working in 12.04

    - by Seyed Mohammad
    When I connect my 3G USB Modem to my laptop with 12.04, nothing shows up in Network-Manager. This modem is working in 11.10 and the modem is shown in Network-Manager but not in 12.04 !! Here are the outputs of lsusb and usb-devices on two machines , one with 11.10 and the other with 12.04 : Ubuntu-11.10 : $ lsusb Bus 002 Device 009: ID 1c9e:6061 $ usb-devices T: Bus=02 Lev=02 Prnt=02 Port=03 Cnt=01 Dev#= 9 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1c9e ProdID=6061 Rev=00.00 S: Manufacturer=3G USB Modem ?? S: SerialNumber=000000000002 C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage Ubuntu-12.04 : $ lsusb Bus 002 Device 003: ID 1c9e:6061 OMEGA TECHNOLOGY WL-72B 3.5G MODEM $ usb-devices T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1c9e ProdID=6061 Rev=00.00 S: Manufacturer=Qualcomm, Incorporated S: Product=USB MMC Storage S: SerialNumber=000000000002 C: #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none) As the output of the above commands show, the device is detected as a modem in 11.10 but in 12.04 it is detected as a USB storage (the device is both a 3G Modem and a SD-card USB adapter). Any help ?!

    Read the article

  • Lubuntu Full Install on USB Drive with Full Disk Encryption and Grub2

    - by vivi
    I apologise for the wall of text, but I want you to scrutinize my thought-process to make sure there's no mistakes and no other way around it: I wish to have a full install of lubuntu with full disk encryption on one of my usb drives. The laptop I would be booting it from also has windows 7. I want to maintain that OS. From what I've read I must place grub2 on the usb drive so that: If I have the usb plugged in, the laptop would start lubuntu (having USB HD in the BIOS Boot options) If I don't have the usb plugged in, it would normally start windows 7. That's exactly what I want it to do. But: If I install from the normal .iso: Clicking "install lubuntu alongside them" would install it onto my normal HD. Clicking "Erase disk and install lunbuntu" would delete all the stuff I have in my HD and install lubuntu on it. Clicking "Something else" would allow me to choose to install lunbuntu and grub2 onto the usb drive, but would not provide it with encryption. So the normal .iso won't work for what I want. Then I found the alternate .iso and this tutorial: It allows me to install lubuntu with all the options I want and gives me the option to choose where to place the grub2! Hopefully there are no flaws in my train of thought. If there aren't, I have a few questions regarding that tutorial: The author says in his case choosing "Yes to install GRUB to your MBR" installed the grub to the usb drive's mbr. I can't have "in his case". I need to be sure that's what it will do, so that it doesn't mess up the windows boot loader. Choosing "no" would open this window and allow to choose where I want to install the grub. Unfortunately I don't understand which option I should type in the box to install it into the usb drive. Would removing my laptop's Hard Drive ensure that the grub is installed onto the usb drive if i picked first option, "yes"? I apologise once again for the wall of text and appreciate any help you guys can offer me.

    Read the article

  • How to run node.js app on port 80? Are processes blocking my port?

    - by Lucas
    I believe the port 80 on my remote instance is blocked, and I am trying to run a node.js app using port 80. I have experimented with ports 3000 and 3002, and both ports are working fine, but I get an error when running on port 80. I suspect port 80 is blocked from my output of netstat -an below, but how can I find the process id's of the addresses that are blocking port 80 below? [lucas@ecoinstance]~/node/nodetest1$ netstat -an Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 127.0.0.1:27017 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:3002 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:27017 127.0.0.1:51108 ESTABLISHED tcp 0 0 127.0.0.1:51106 127.0.0.1:27017 ESTABLISHED tcp 0 0 127.0.0.1:27017 127.0.0.1:51106 ESTABLISHED tcp 0 0 127.0.0.1:51107 127.0.0.1:27017 ESTABLISHED tcp 0 0 10.240.241.116:3002 174.61.171.61:36583 TIME_WAIT tcp 0 0 127.0.0.1:27017 127.0.0.1:51109 ESTABLISHED tcp 0 0 10.240.241.116:42423 169.254.169.254:80 ESTABLISHED tcp 0 0 127.0.0.1:51108 127.0.0.1:27017 ESTABLISHED tcp 0 532 10.240.241.116:22 174.61.171.61:56824 ESTABLISHED tcp 0 0 127.0.0.1:27017 127.0.0.1:51107 ESTABLISHED tcp 0 0 10.240.241.116:42412 169.254.169.254:80 ESTABLISHED tcp 0 0 127.0.0.1:51109 127.0.0.1:27017 ESTABLISHED tcp 0 0 127.0.0.1:51105 127.0.0.1:27017 ESTABLISHED tcp 0 0 10.240.241.116:42422 169.254.169.254:80 TIME_WAIT tcp 0 0 127.0.0.1:27017 127.0.0.1:51105 ESTABLISHED tcp6 0 0 :::22 :::* LISTEN udp 0 0 0.0.0.0:49948 0.0.0.0:* udp 0 0 0.0.0.0:68 0.0.0.0:* udp 0 0 10.240.241.116:123 0.0.0.0:* udp 0 0 127.0.0.1:123 0.0.0.0:* udp 0 0 0.0.0.0:123 0.0.0.0:* udp6 0 0 :::12151 :::* udp6 0 0 :::123 :::* Active UNIX domain sockets (servers and established) Proto RefCnt Flags Type State I-Node Path unix 2 [ ACC ] STREAM LISTENING 405680 /tmp/ssh-KdkxJfFLpKTC/agent.22 813 unix 2 [ ACC ] STREAM LISTENING 408230 /tmp/ssh-ofUeNNEwAqtP/agent.22 243 unix 2 [ ACC ] STREAM LISTENING 416227 /tmp/mongodb-27017.sock unix 2 [ ACC ] SEQPACKET LISTENING 3692 /run/udev/control unix 7 [ ] DGRAM 5286 /dev/log unix 2 [ ACC ] STREAM LISTENING 5318 /var/run/acpid.socket unix 2 [ ACC ] STREAM LISTENING 16170 /tmp//tmux-1000/default unix 2 [ ACC ] STREAM LISTENING 414450 /var/run/dbus/system_bus_socke And here is the log when trying to run on port 80 with node.js: [lucas@ecoinstance]~/node/nodetest1$ npm start > [email protected] start /home/lucas/node/nodetest1 > node ./bin/www events.js:72 throw er; // Unhandled 'error' event ^ Error: listen EACCES at errnoException (net.js:904:11) at Server._listen2 (net.js:1023:19) at listen (net.js:1064:10) at Server.listen (net.js:1138:5) at Function.app.listen (/home/lucas/node/nodetest1/node_modules/express/lib/applicati on.js:532:24) at Object.<anonymous> (/home/lucas/node/nodetest1/bin/www:7:18) at Module._compile (module.js:456:26) at Object.Module._extensions..js (module.js:474:10) at Module.load (module.js:356:32) at Function.Module._load (module.js:312:12) npm ERR! [email protected] start: `node ./bin/www` npm ERR! Exit status 8 npm ERR! npm ERR! Failed at the [email protected] start script. npm ERR! This is most likely a problem with the nodetest1 package, npm ERR! not with npm itself. npm ERR! Tell the author that this fails on your system: npm ERR! node ./bin/www npm ERR! You can get their info via: npm ERR! npm owner ls nodetest1 npm ERR! There is likely additional logging output above. npm ERR! System Linux 3.13-0.bpo.1-amd64 npm ERR! command "/usr/local/bin/node" "/usr/local/bin/npm" "start" npm ERR! cwd /home/lucas/node/nodetest1 npm ERR! node -v v0.10.28 npm ERR! npm -v 1.4.9 npm ERR! code ELIFECYCLE npm ERR! npm ERR! Additional logging details can be found in: npm ERR! /home/lucas/node/nodetest1/npm-debug.log npm ERR! not ok code 0 And sudo netstat -lnp does not return any matching port 80's: [lucas@ecoinstance]~/node/nodetest1$ sudo netstat -lnp [48/648] Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Progr am name tcp 0 0 127.0.0.1:27017 0.0.0.0:* LISTEN 29160/mon god tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 1976/sshd tcp6 0 0 :::22 :::* LISTEN 1976/sshd udp 0 0 0.0.0.0:49948 0.0.0.0:* 1604/dhcl ient udp 0 0 0.0.0.0:68 0.0.0.0:* 1604/dhcl ient udp 0 0 10.240.241.116:123 0.0.0.0:* 2076/ntpd udp 0 0 127.0.0.1:123 0.0.0.0:* 2076/ntpd udp 0 0 0.0.0.0:123 0.0.0.0:* 2076/ntpd udp6 0 0 :::12151 :::* 1604/dhcl ient udp6 0 0 :::123 :::* 2076/ntpd Active UNIX domain sockets (only servers) Proto RefCnt Flags Type State I-Node PID/Program name Path unix 2 [ ACC ] STREAM LISTENING 405680 22814/ssh-agent /tmp/ssh-K dkxJfFLpKTC/agent.22813 unix 2 [ ACC ] STREAM LISTENING 408230 24049/ssh-agent /tmp/ssh-o fUeNNEwAqtP/agent.22243 unix 2 [ ACC ] STREAM LISTENING 416227 29160/mongod /tmp/mongo db-27017.sock unix 2 [ ACC ] SEQPACKET LISTENING 3692 284/udevd /run/udev/ control unix 2 [ ACC ] STREAM LISTENING 5318 1798/acpid /var/run/a cpid.socket unix 2 [ ACC ] STREAM LISTENING 16170 5177/tmux /tmp//tmux -1000/default unix 2 [ ACC ] STREAM LISTENING 414450 28213/dbus-daemon /var/run/d bus/system_bus_socket unix 2 [ ACC ] STREAM LISTENING 404225 22324/1 /tmp/ssh-9 TlDmu4bjl/agent.22324

    Read the article

  • Pendrive not working on USB port - USB2 Enhanced Host Controller - 27CC

    - by user1664417
    I have a situation here, is kind of weird. Situation as below: If i enable the 'Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC' , then my pc will not be able to read any USB stick/pendrive, but usb port work fine with keyboard and mouse. If I disable the device driver, then all kind of pendrive can be read. Below is What i have done : 1) try the same pendrive on other pc, it work like charm. 2) try others pendrive on issue pc, same problem, but it work fine in others pc. 3) try all the port, including the port that connected to mouse n keyboard. 4) update the driver version. 5) restore default setting of usb in bios Please help to solve these issue if anyone experience it before. Many thanks.. :

    Read the article

  • Max length of a USB Cable?

    - by Click Ok
    I want to use a very long USB cable to, for example, place a webcam in a different room. The max length that I found was 5 meters. What the max length of a USB cable and... What the max length that I can get using USB extension cables? Thanks in advance!

    Read the article

  • Can't access USB drive anymore

    - by marie
    I have a 32 GB Lacie Cookey USB flash disk that doesn't show in the Computer window but it's visible as a device. cmd > diskpart DISKPART> list disk Disk ### Status Size -------- ------------- ------ Disk 0 Online 149 G Disk 1 No Media 0 DISKPART> select disk 1 Disk 1 is now the selected disk. DISKPART> clean Virtual Disk Service error: There is no media in the device. It also appears in the Disk Management tool, but the box is empty. Is there anything I can do or is it dead? ............................................................ output from ChipGenius: Description: [F:]USB Mass Storage Device(LaCie CooKey) Device Type: Mass Storage Device Protocal Version: USB 2.00 Current Speed: High Speed Max Current: 200mA USB Device ID: VID = 059F PID = 103B Serial Number: 070535924B170C18 Device Vendor: LaCie Device Name: CooKey Device Revision: 0100 Manufacturer: LaCie Product Model: CooKey Product Revision: PMAP Controller Vendor: Phison Controller Part-Number: PS2251-67(PS2267) - F/W 06.08.53 [2012-09-26] Flash ID code: 983AA892 - Toshiba [TLC] Tools on web: http://dl.mydigit.net/special/up/phison.html

    Read the article

  • Intermittent USB 3.0 access - How do I troubleshoot?

    - by Billy ONeal
    I've got a WD Passport hard disk with "superspeed" USB 3.0 support. When I use my USB 3.0 flash drive (this is a Lenovo X220 laptop), USB 3.0 consistently works. But when I use the passport drive, almost without fail the connection drops to USB 2.0. Touching the cable seems to immediately trigger the problem, but it seems to happen on its own though. I've got another cable on order right now... but is it likely the cable's the issue here? Is there anything else I can check?

    Read the article

  • Is it possible to connect an internal USB 3 card reader in a computer with only USB 2?

    - by Grzenio
    I would like to buy an internal flash card reader. There are now loads of USB 3 reader, however I still have an USB 2 system. Would it be possible to connect the new reader to the old USB port on the motherboard? I understand that I will not be able to take advantage of having the faster reader with the old motherboard, but I am planning an upgrade next year and I would like to avoid having to upgrade the card reader as well...

    Read the article

  • Create bootable USB install image from command line?

    - by j-g-faustus
    I'm trying to create a bootable USB image to install Ubuntu on a new computer. I have done this before following the "create USB drive" instructions for Ubuntu desktop, but I don't have an Ubuntu desktop available. How can I do the same using only the command line? Things I've tried: Create bootable USB on Mac OS X following the ubuntu.com "create USB drive" instructions for Mac: Doesn't boot. usb-creator: According to apt-cache search usb-creator and Wikipedia usb-creator only exists as a graphical tool. "Create manually" instructions at help.ubuntu.com: None of the files and directories described (e.g. casper, filesystem.manifest, menu.lst) exist in the ISO image, and I don't know what has replaced them. (At my disposal is Mac OS X and Ubuntu server; I have neither Ubuntu desktop nor Windows.)

    Read the article

  • Mount and unmount errors when usb is connected in 12.10.

    - by Mysterio
    I just installed 12.10 and noticed some strange behaviour every time I connect a USB storage device. It reports I already have the device mounted by a different user but there is only one user account on this set up. Here is a picture of the dialogue: Also when I try to mount the inserted USB drive, I have to enter gain root privileges before the device will unmount successfully. Like this: . I can't copy/delete any file without root access either with the default file manager or third party file manager, Marlin. How do I resolve this rather frustrating experience? Thanks in advance.

    Read the article

  • How to build a dynamic grub on a usb-drive?

    - by 13east
    I would like to setup GRUB on a USB where it detects automatically the available OS installations on the machine that it is plugged into. This could be useful if you messed up your default GRUB menu on a computer and would like to boot into the machine w/out booting Live-OS. Or if you have multiple Live-OS installations on a USB-Drive and would like to add/remove different installations w/out needing to update grub manually. I know that Grub2 has a OS-prober feature that looks for other installations on the hard-drive, but will that work in either of the scenarios listed above?

    Read the article

  • Port Forwarding a Specific Port (e.g. 22)

    - by Jerry Blair
    I'm still confused about establishing an SSH connection (port 22) between two computers on different internal networks. For example: I am on my computer with internal IP address IIP-1, connected to my router RT-1. There are 10 IIPs connected to RT-1. I want to establish an SSH connection to IIP-3 which is connected to router RT-2. There are 10 IIPs connected to RT-2. At any time, there can be multiple SSH connections between IIPs on RT-1 and RT-2. Since I only have port 22 available, I don't know which SSH session is talking between which IIPs. I looked at a couple of similar questions but am still unclear on the solution. Thanks much, Jerry

    Read the article

  • My Portable Hard Drive with USB3 didn't work when connected to My Laptop, but it working with USB2 properly

    - by Mohammad Hasan Esfahanian
    I have Western Digital My Passport Essential Portable Hard Drive with USB3 and Model:WDBACY5000ABK-EESN. Until about two or three months ago when I connected that to My Laptop USB3 port, that worked very well. But now when I'm connecting that to My device, The system does not detect any Hard Drives. When plug in the USB2 port is working properly. I connected that to another Laptop whit USB3 port but I had the same problem. I tested My Laptop port with a Flash Memory by USB3 and ports were healthy and I'm sure they are working. For this issue, I changed the windows, but it still did not work. What can I do? Thanks in advance.

    Read the article

  • Our embedded linux system won't recognize a USB Device if it is plugged in before powerup. Suggestions?

    - by Blaine
    We are developing on a small embedded device. This device us a gumstix overo board running OpenEmbedded linux. We have our development almost completely done, and have run into the strangest of bugs that we can't figure out. We have a USB Device (Spectrophotometer) that has a USB2.0 Connection and an external power supply for the light source. Typical behavior is that you plug in the power supply, then the USB connection to a host. When the usb connection is detected by the device, the device boots up and enables the light source and fan. The device is then able to be used by the host system. The problem is that if the device is plugged into the Gumstix before we turn on the Gumstix, the USB Device apparently is not probed by the system (and hence does not turn on). Under a normal situation, when the connection is initialized by plugging in the usb cable, the spectro turns itself on and becomes available to the system (this can be seen via "lsusb" typically). Neither of these things are happening. There is no device detected via "lsusb" and no dmesg errors of any kind that we can see. It is as if the device is not plugged in. The device does show up and work fine if we unplug the USB cable and plug it back in once the system is booted up. It turns on and shows up on the usb bus, and we can access it with our driver. On any other desktop or laptop, it does not matter if the host system is on or off when we plug in the spectrometer. This behavior is what I would consider to be "normal" - that the usb system is probed and initialized at boot time, and the usb devices come online. In other words, our system is fully functional as long as we plug in the usb device after the system is booted up. Unfortunately this isn't possible in our final product - everything comes on at once. Additional Info: 1) We have tried a flash drive attached to the system when the system is turned off. Booting up the system brings the flash drive online, as expected 2) There are no messages regarding the spectro or usb device (using dmesg). "lsusb" only lists the USB hubs / controllers. It is literally as if the device is not present and not plugged in. 3) We have tried a brand new image from gumstix and an older image from last year. Both images have this problem. This problem exists on all 3 gumstix devices we use. Does anyone have any suggestions? From what I can tell it isn't really possible to do a complete "reboot" of the usb system that is a complete emulation of "unplugging" and "replugging" a usb device. I feel like what is happening is that there is no initial probe on the usb bus that would trigger the usb handshaking, but this is somehow specific to the spectro. This seems to be a kernel issue or at least an issue in how the kernel is initializing the usb subsystem. I'm not really sure though. I have tried the gumstix mailing list, but there doesn't seem to be anyone who has seen this issue before. Any advice or suggestions on where to start looking would be fantastic. Thank you! Blaine output etc. $ uname -a Linux overo 2.6.33 #1 Tue Apr 27 08:35:38 PDT 2010 armv7l GNU/Linux When the system is up and running and spectro is plugged in (working as intended), this is lsusb: Bus 001 Device 116: ID 2457:1022 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x2457 idProduct 0x1022 bcdDevice 0.02 iManufacturer 1 USB4000 1.01.11 iProduct 2 Ocean Optics USB4000 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 46 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 400mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 4 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x86 EP 6 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered) dmesg output: usb usb1: usb auto-resume hub 1-0:1.0: hub_resume usb usb2: usb auto-resume ehci-omap ehci-omap.0: resume root hub hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000 hub 2-0:1.0: hub_resume hub 2-0:1.0: state 7 ports 3 chg 0000 evt 0000 hub 1-0:1.0: hub_suspend usb usb1: bus auto-suspend hub 2-0:1.0: hub_suspend usb usb2: bus auto-suspend ehci-omap ehci-omap.0: suspend root hub usb usb2: usb resume ehci-omap ehci-omap.0: resume root hub hub 2-0:1.0: hub_resume ehci-omap ehci-omap.0: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT hub 2-0:1.0: port 2: status 0501 change 0001 hub 2-0:1.0: state 7 ports 3 chg 0004 evt 0000 hub 2-0:1.0: port 2, status 0501, change 0000, 480 Mb/s ehci-omap ehci-omap.0: port 2 high speed ehci-omap ehci-omap.0: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT usb 2-2: new high speed USB device using ehci-omap and address 2 ehci-omap ehci-omap.0: port 2 high speed ehci-omap ehci-omap.0: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT usb 2-2: default language 0x0409 usb 2-2: udev 2, busnum 2, minor = 129 usb 2-2: New USB device found, idVendor=2457, idProduct=1022 usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-2: Product: Ocean Optics USB4000 usb 2-2: Manufacturer: USB4000 1.01.11 usb 2-2: uevent usb 2-2: usb_probe_device usb 2-2: configuration #1 chosen from 1 choice usb 2-2: uevent usb 2-2: adding 2-2:1.0 (config #1, interface 0) usb 2-2:1.0: uevent drivers/usb/core/inode.c: creating file '002' dmesg has nothing to say, and lusb simply lists nothing else but the two default usb controllers / hubs if we plug the device in before the system is turned on.

    Read the article

  • NEC Corporation uPD720200 USB 3.0 controller doesn't run at full speed

    - by Radek Zyskowski
    I have fresh install of Ubuntu 10.10. I have external HD on USB 3.0. Trying to connect this via PCI Express NEC controller. dmesg: [ 8966.820078] usb 6-3: new high speed USB device using xhci_hcd and address 0 [ 8966.839831] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep [ 8966.840580] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep [ 8966.841329] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep [ 8966.842079] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep [ 8966.843343] scsi8 : usb-storage 6-3:1.0 [ 8967.847144] scsi 8:0:0:0: Direct-Access SAMSUNG HD204UI 1AQ1 PQ: 0 ANSI: 5 [ 8967.847589] sd 8:0:0:0: Attached scsi generic sg2 type 0 [ 8967.847923] sd 8:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 8967.848341] xhci_hcd 0000:02:00.0: WARN: Stalled endpoint [ 8967.850959] sd 8:0:0:0: [sdb] Write Protect is off [ 8967.850963] sd 8:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 8967.850966] sd 8:0:0:0: [sdb] Assuming drive cache: write through [ 8967.851818] xhci_hcd 0000:02:00.0: WARN: Stalled endpoint [ 8967.852365] sd 8:0:0:0: [sdb] Assuming drive cache: write through [ 8967.852370] sdb: sdb1 [ 8967.871315] xhci_hcd 0000:02:00.0: WARN: Stalled endpoint [ 8967.871853] sd 8:0:0:0: [sdb] Assuming drive cache: write through [ 8967.871856] sd 8:0:0:0: [sdb] Attached SCSI disk [ 8967.950728] xhci_hcd 0000:02:00.0: WARN: Stalled endpoint [ 8967.951355] sd 8:0:0:0: [sdb] Sense Key : Recovered Error [current] [descriptor] [ 8967.951361] Descriptor sense data with sense descriptors (in hex): [ 8967.951363] 72 01 04 1d 00 00 00 0e 09 0c 00 00 00 00 00 00 [ 8967.951375] 00 00 00 00 00 50 [ 8967.951380] sd 8:0:0:0: [sdb] ASC=0x4 ASCQ=0x1d [ 8968.790076] xhci_hcd 0000:02:00.0: HC died; cleaning up [ 8968.790076] usb 6-3: USB disconnect, address 2 [ 8999.008554] scsi 8:0:0:0: [sdb] Unhandled error code [ 8999.008558] scsi 8:0:0:0: [sdb] Result: hostbyte=DID_TIME_OUT driverbyte=DRIVER_OK [ 8999.008562] scsi 8:0:0:0: [sdb] CDB: Read(10): 28 00 74 70 97 39 00 00 3e 00 [ 8999.008573] end_request: I/O error, dev sdb, sector 1953535801 [ 8999.008578] Buffer I/O error on device sdb1, logical block 1953535738 [ 8999.008582] Buffer I/O error on device sdb1, logical block 1953535739 [ 8999.008585] Buffer I/O error on device sdb1, logical block 1953535740 [ 8999.008589] Buffer I/O error on device sdb1, logical block 1953535741 [ 8999.008592] Buffer I/O error on device sdb1, logical block 1953535742 [ 8999.008595] Buffer I/O error on device sdb1, logical block 1953535743 [ 8999.008600] Buffer I/O error on device sdb1, logical block 1953535744 [ 8999.008603] Buffer I/O error on device sdb1, logical block 1953535745 [ 8999.008606] Buffer I/O error on device sdb1, logical block 1953535746 [ 8999.008609] Buffer I/O error on device sdb1, logical block 1953535747 [ 8999.008642] scsi 8:0:0:0: rejecting I/O to offline device [ 8999.008747] scsi 8:0:0:0: [sdb] Unhandled error code [ 8999.008749] scsi 8:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 8999.008752] scsi 8:0:0:0: [sdb] CDB: Read(10): 28 00 74 70 97 77 00 00 3e 00 [ 8999.008760] end_request: I/O error, dev sdb, sector 1953535863 sudo lspci -v 2:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) (prog-if 30) Physical Slot: 32 Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at fe9fe000 (64-bit, non-prefetchable) [size=8K] Capabilities: [50] Power Management version 3 Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+ Capabilities: [90] MSI-X: Enable- Count=8 Masked- Capabilities: [a0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [140] Device Serial Number ff-ff-ff-ff-ff-ff-ff-ff Capabilities: [150] #18 Kernel driver in use: xhci_hcd Kernel modules: xhci-hcd If I try to put into this controller any USB 2.0, it works fine. But USB 3.0 nope. Any idea?

    Read the article

  • execute a shell script when USB is connected

    - by Null pointer
    I am working on an application which deals with all kinds of USB storage devices(such as taking backup, updating DataLogFile etc) My problem is : I want to write a shell script which is stored in this USB drive(As usb is at center of my project so USB is going to be same but PC's will change) AND this script should be executed as soon as the USB drive is connected to my Linux system.I will not need any kind of "root" or "sudo" permissions for other tasks which I am going to do in this shell script.

    Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >