Search Results

Search found 392 results on 16 pages for 'wins'.

Page 5/16 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • Database Deployment: The Bits - Getting Data In

    Quite often, the database developer or tester is faced with having to load data into a newly created database. What could be simpler? Quite a lot of things, it seems. SQL Backup Pro wins Gold Community Choice AwardFind out why the SQL Server Community voted SQL Backup Pro 'Best Backup and Recovery Product 2012'. Get faster, smaller, fully verified backups. Download a free trial now.

    Read the article

  • Getting SMB file shares working over a PPTP VPN

    - by Ben Scott
    I'm having issues getting SMB file shares working over a PPTP VPN. The server setup consists of a security device (DrayTek V3300) which passes the PPTP authentication to a SBS2003 server running RRAS. The server is the DC and provides DNS and WINS, the single NIC's name server is set to the NIC's IP (192.168...), and DHCP on the DrayTek sets the server IP as the DNS. If I create a new VPN connection in Win7, leaving everything as default apart from the server, username, password and domain, I can: ping everything by IP address resolve IPs with nslookup using their fully-qualified name, as in nslookup fileserver.mydomain.local ping machines by fully-qualified name, as in ping fileserver.mydomain.local However if I try to access a file share: within Explorer, I get "Windows cannot access ..." with "Error code: 0x80004005 Unspecified Error", using net use z: \\fileserver.mydomain.local\share, I get "System error 53 has occurred. The network path was not found." If I add the machine name to my HOSTS file I can use the file share, which is my last-ditch workaround, but I have a number of VPN users and would rather a solution that doesn't involve me trying to hand-edit system files on computers half a country away. If I set the WINS server explicitly in the connection's IPv4 settings I don't have to use the FQN to ping the machine, but that doesn't change anything else. EDIT: The PC I'm having the issue on is running Win 7 Home Premium. After more testing I actually have two other PCs that work, one W7HP, one XP Home, and another Vista PC that doesn't work (not tested as much as the others), all four on the same internet connection (behind the same router). All of them were tested with a straight-forward, all defaults, new VPN configuration.

    Read the article

  • IIS6.0 asking for credentials after MS Updates

    - by Adam M.
    We have an IIS6.0 Server running on a Windows 2003 Server. Last weekend it went though maintenance, and updated a quite a few Windows updates, it is now brought up to current updates (as of March 29th). Previous to these updates we could connect to the Web page via the hostname or via a alias (there is a DNS and a WINS alias (the alias is the same name in both) that are both pointing to the system). Now since the updates it asks for credentials to access the page, when trying to access the page via IP, or by name. If you use the alias it will go right into the page. I had added a new alias in DNS and tried to access it via this name with the same effect. So it appears that the WINS alias allows the page to show up properly. I have seen this KB but http://support.microsoft.com/kb/871179 though not sure if it really is relevant to this issue. As it does refer to the 3 strikes rules to display the 401.1 error. The IIS Application pool is running under a domain account. Teh default page is allowing Anonymous login under a local account. Any thoughts? Thanks Adam

    Read the article

  • RRAS VPN on windows 2k3 AD, can access rras server only.

    - by nopsax
    I'm setting up a test lab and here is the current configuration: 192.168.86.201 - a windows 2003 machine acting as PDC with AD/DNS/DHCP/WINS. 192.168.86.62 - windows 2003 machine is the RRAS server with IAS, also a file/print server. 192.168.86.6 - gateway/router to internet 192.168.86.21 - Windows XP Workstation Everything works on the internal network, File/Print/AD etc. Whenever a user connects via vpn to the RRAS server remotely using their domain credentials, they are assigned an ip address from the 192.168.86.201 machine along with the wins server address etc. The vpn user can then ping/access resources on the RRAS server, but cannot ping/access resources of any other machines by name or ip. However, if I ping by name, it does resolve to the correct ip address, just no replies. I did notice that on the RRAS server the 'internal' interface gets an ip address of 192.168.86.75 when a remote user connects, and the remote user is assigned, for example 192.168.86.71 . The RRAS server responds on both the .62 and .75 ip addresses. The client also unchecks the 'use remote default gateway option'. Also, I tried connecting a laptop to the physical network, joining the domain, then going remote and dialing the connection before domain login, and everything seems to work, e.g. browse-able shares via network neighborhood. But I can't really join the domain remotely if I cannot access any other resources. I really need to monitor traffic to see whats happening to those packets but won't be able to until this weekend. Any help is appreciated, will provide whatever configurations are needed.

    Read the article

  • Providing access to a Samba server for VPN clients

    - by Kamil Kisiel
    We have some Windows users that connect to our network via VPN from home. They need to be able to connect to our Samba server and access a mapped network drive just as they do as when they are on our LAN. The complication is that VPN clients are placed on a subnet other than our office LAN, and behind a firewall. What's the easiest way for me to allow them to still connect to the network share? The solutions I've currently seen involve setting up a WINS server for name resolution purposes and then tunnelling a bunch of the NetBIOS stuff through the firewall. However that means I'd have to set up the VPN DHCP server to hand out the WINS address, something I'm not even sure is possible on the Cisco hardware we have. I'm thinking there must be an easier way. Should I use an LMHOSTS file? Or just map by IP address? Also, I'm not terribly familiar with Windows networking, so which ports would I need to pass through my firewall in order to get the file sharing through?

    Read the article

  • How to Load Balance 2 Internet Connections on a Windows 7 machine?

    - by Jimmy Chandra
    It's sort of related to this particular question, but that one is on Mac. I am looking for similar solution on Windows 7. I have 2 network connections: (Connection A) Wireless terminal connecting to ISP A (3G / EVDO internet provider) (Connection B) Broadband wired connection connecting to ISP B (Cable internet provider) Both has access to the internet. When I try connecting to a website and checking the networking tab on my Task Manager, I only see the network traffic being routed to only Connection A. Is there a way to make the computer to utilize both network (in a sense using all the bandwidth available from both the Cable ISP and the 3G / EVDO ISP) at the same time? If so, what do I need to do to set this up ... on Windows 7? Here is a bit more info on my network connections (ipconfig /all): PPP adapter Wireless Terminal: IPv4: aa.bb.ccc.ddd(preferred) Subnet mask: 255.255.255.255 Default Gateway: 0.0.0.0 DNS: aa.ee.f.ggg aa.ee.f.hhh Primary Wins: jjj.ii.k.l Secondary Wins: jjj.ii.k.m Ethernet adapter LAN: IPv4: 192.168.1.100 (connected to a router by wired that itself connect to a cable modem) subnet mask: 255.255.255.0 Default gateway: 192.168.1.1 (the wireless router) DHCP: 192.168.1.1 (the wireless router) DNS: xxx.yy.zz.ww rr.sss.t.uuu For my own privacy, I don't believe the actual number matters, the patterns are representative of the ip numbering scheme...

    Read the article

  • Getting SMB file shares working over a PPTP VPN

    - by Ben Scott
    I'm having issues getting SMB file shares working over a PPTP VPN. The server setup consists of a security device (DrayTek V3300) which passes the PPTP authentication to a SBS2003 server running RRAS. The server is the DC and provides DNS and WINS, the single NIC's name server is set to 127.0.0.1, and DHCP on the DrayTek sets the server IP as the DNS. If I create a new VPN connection in Win7, leaving everything as default apart from the server, username, password and domain, I can: ping everything by IP address resolve IPs with nslookup using their fully-qualified name, as in nslookup fileserver.mydomain.local ping machines by fully-qualified name, as in ping fileserver.mydomain.local However if I try to access a file share: within Explorer, I get "Windows cannot access ..." with "Error code: 0x80004005 Unspecified Error", using net use z: \\fileserver.mydomain.local\share, I get "System error 53 has occurred. The network path was not found." If I add the machine name to my HOSTS file I can use the file share, which is my last-ditch workaround, but I have a number of VPN users and would rather a solution that doesn't involve me trying to hand-edit system files on computers half a country away. If I set the WINS server explicitly in the connection's IPv4 settings I don't have to use the FQN to ping the machine, but that doesn't change anything else.

    Read the article

  • Windows Vista/7 dropping Mac Server share points

    - by Hooligancat
    My Windows Vista and Windows 7 clients are having problems maintaining access to SMB shares on a Mac server. The initial connection to the server appears to be OK, as the Windows clients can see all of the server share points. However, the client randomly drops a couple of the server share points although the clients can still see the server. For example. If I have the following share points on the Mac server: Share A Share B Share C Share D Share E The Windows client can see these shares most of the time and can access them most of the time. But randomly a couple of the shares will just get dropped or go missing from the Windows client's ability to view them so I end up with something like: Share B Share D Share E All the share points are established int the same way with the same permission settings. My Mac OSX Server is set up with the following for SMB: SMB sharing enabled Standalone Server Workgroup of `CORPORATE` Allow Guest Access = YES Client connections limit = 100 Authentication: NTLMv2 & Kerberos and NTLM Code Page is Latin US (437) This is a workgroup master browser WINS registration is set to Enable WINS server (tried with setting off) Enable virtual share points for homes YES I noticed in my SMB file service log that the clients appear to connect OK, but I get the following error which implies a reset by either the server or the client: /SourceCache/samba/samba-187.9/samba/source/lib/util_sock.c:read_data(534) read_data: read failure for 4 bytes to client 192.168.0.99. = Connection reset by peer I am a bit stumped as to a direction to turn to try and get this to resolve. Continued attempts to access the server from the client will reconnect to the share points, but they inevitably get dropped again in the near future. Any and all help much appreciated.

    Read the article

  • How to change mount to grant user write permissions?

    - by nals
    I am on TomatoUSB, and using the feature to have a NAS. The only way I can write to the Samba share is if I force root: [global] interfaces = 127.0.0.1, 192.168.1.1/24 bind interfaces only = no workgroup = WORKGROUP netbios name = TOMATO security = share wins support = yes name resolve order = wins lmhosts hosts bcast guest account = nobody [Public] path = /mnt/sda2 read only = no public = yes only guest = yes guest ok = yes browseable = yes comment = Network share force user = root writeable = yes I dont really like the idea having to use root to allow write access to my share. I have a samba account created already named nobody to allow access to the share. However every time I try to write I get access denied error. fstab: /dev/sda2 /mnt/sda2 vfat defaults 0 0 Further more every time I try to chmod 777 /tmp/mnt/sda2 the permissions are not changed, and no error is produced. They stay 755. drwxr-xr-x 2 root root 4096 Jun 4 01:49 sda2 Basically; how can I give the user nobody write permissions to my mount? dev name: /dev/sda2 dev mount: /tmp/mnt/sda2

    Read the article

  • Using inheritance and polymorphism to solve a common game problem

    - by Barry Brown
    I have two classes; let's call them Ogre and Wizard. (All fields are public to make the example easier to type in.) public class Ogre { int weight; int height; int axeLength; } public class Wizard { int age; int IQ; int height; } In each class I can create a method called, say, battle() that will determine who will win if an Ogre meets and Ogre or a Wizard meets a Wizard. Here's an example. If an Ogre meets an Ogre, the heavier one wins. But if the weight is the same, the one with the longer axe wins. public Ogre battle(Ogre o) { if (this.height > o.height) return this; else if (this.height < o.height) return o; else if (this.axeLength > o.axeLength) return this; else if (this.axeLength < o.axeLength) return o; else return this; // default case } We can make a similar method for Wizards. But what if a Wizard meets an Ogre? We could of course make a method for that, comparing, say, just the heights. public Wizard battle(Ogre o) { if (this.height > o.height) return this; else if (this.height < o.height) return o; else return this; } And we'd make a similar one for Ogres that meet Wizard. But things get out of hand if we have to add more character types to the program. This is where I get stuck. One obvious solution is to create a Character class with the common traits. Ogre and Wizard inherit from the Character and extend it to include the other traits that define each one. public class Character { int height; public Character battle(Character c) { if (this.height > c.height) return this; else if (this.height < c.height) return c; else return this; } } Is there a better way to organize the classes? I've looked at the strategy pattern and the mediator pattern, but I'm not sure how either of them (if any) could help here. My goal is to reach some kind of common battle method, so that if an Ogre meets an Ogre it uses the Ogre-vs-Ogre battle, but if an Ogre meets a Wizard, it uses a more generic one. Further, what if the characters that meet share no common traits? How can we decide who wins a battle?

    Read the article

  • April 14th Links: ASP.NET, ASP.NET MVC, ASP.NET Web API and Visual Studio

    - by ScottGu
    Here is the latest in my link-listing blog series: ASP.NET Easily overlooked features in VS 11 Express for Web: Good post by Scott Hanselman that highlights a bunch of easily overlooked improvements that are coming to VS 11 (and specifically the free express editions) for web development: unit testing, browser chooser/launcher, IIS Express, CSS Color Picker, Image Preview in Solution Explorer and more. Get Started with ASP.NET 4.5 Web Forms: Good 5-part tutorial that walks-through building an application using ASP.NET Web Forms and highlights some of the nice improvements coming with ASP.NET 4.5. What is New in Razor V2 and What Else is New in Razor V2: Great posts by Andrew Nurse, a dev on the ASP.NET team, about some of the new improvements coming with ASP.NET Razor v2. ASP.NET MVC 4 AllowAnonymous Attribute: Nice post from David Hayden that talks about the new [AllowAnonymous] filter introduced with ASP.NET MVC 4. Introduction to the ASP.NET Web API: Great tutorial by Stephen Walher that covers how to use the new ASP.NET Web API support built-into ASP.NET 4.5 and ASP.NET MVC 4. Comprehensive List of ASP.NET Web API Tutorials and Articles: Tugberk Ugurlu links to a huge collection of articles, tutorials, and samples about the new ASP.NET Web API capability. Async Mashups using ASP.NET Web API: Nice post by Henrik on how you can use the new async language support coming with .NET 4.5 to easily and efficiently make asynchronous network requests that do not block threads within ASP.NET. ASP.NET and Front-End Web Development Visual Studio 11 and Front End Web Development - JavaScript/HTML5/CSS3: Nice post by Scott Hanselman that highlights some of the great improvements coming with VS 11 (including the free express edition) for front-end web development. HTML5 Drag/Drop and Async Multi-file Upload with ASP.NET Web API: Great post by Filip W. that demonstrates how to implement an async file drag/drop uploader using HTML5 and ASP.NET Web API. Device Emulator Guide for Mobile Development with ASP.NET: Good post from Rachel Appel that covers how to use various device emulators with ASP.NET and VS to develop cross platform mobile sites. Fixing these jQuery: A Guide to Debugging: Great presentation by Adam Sontag on debugging with JavaScript and jQuery.  Some really good tips, tricks and gotchas that can save a lot of time. ASP.NET and Open Source Getting Started with ASP.NET Web Stack Source on CodePlex: Fantastic post by Henrik (an architect on the ASP.NET team) that provides step by step instructions on how to work with the ASP.NET source code we recently open sourced. Contributing to ASP.NET Web Stack Source on CodePlex: Follow-on to the post above (also by Henrik) that walks-through how you can submit a code contribution to the ASP.NET MVC, Web API and Razor projects. Overview of the WebApiContrib project: Nice post by Pedro Reys on the new open source WebApiContrib project that has been started to deliver cool extensions and libraries for use with ASP.NET Web API. Entity Framework Entity Framework 5 Performance Improvements and Performance Considerations for EF5:  Good articles that describes some of the big performance wins coming with EF5 (which will ship with both .NET 4.5 and ASP.NET MVC 4). Automatic compilation of LINQ queries will yield some significant performance wins (up to 600% faster). ASP.NET MVC 4 and EF Database Migrations: Good post by David Hayden that covers the new database migrations support within EF 4.3 which allows you to easily update your database schema during development - without losing any of the data within it. Visual Studio What's New in Visual Studio 11 Unit Testing: Nice post by Peter Provost (from the VS team) that talks about some of the great improvements coming to VS11 for unit testing - including built-in VS tooling support for a broad set of unit test frameworks (including NUnit, XUnit, Jasmine, QUnit and more) Hope this helps, Scott

    Read the article

  • Elo system behaves oddly in program I've created

    - by adc
    Alright, so I'm looking to build a small program (C# and XAML) that, essentially, does this: Generate array of players. Each player has a current rating and a true rating. I set current rating to 1200 as a starting point right now; I've also tried setting it to true rating and the average of the two. True rating is what their skill level actually is. Their true rating is calculated based on percentages from the current League of Legends rating system; generating an array of 970 thousand generates results very similar to the data from here: (removed due to URL limit - but trust me, the results are very similar). This array is of length specified by the user. If need be, sort the array from smallest to largest. Play X number of games, again specified by the user. This is done by taking the array of players (which is sorted by Current Rating after being created) and running through it in groups of 10. The first five are on team one, the second five are on team two. It then takes the True Rating of these players and calculates an expected chance to win using the Elo system. It generates a random double and compares it to the expected chance to win; if the number is lower, team one wins - otherwise team two wins. I then update the rating of the players via, again, the Elo system - giving the winning team a score of 1 and the losing team a score of 0. I use a K value of 36 (but have tried 12, 24, and even higher ones) and an F value of 400. After going through the entire loop of players (which I have conveniently forced to be a multiple of ten), it sorts the array - again via current rating. This, if my understanding of the Elo system is correct, runs properly. However, it doesn't seem to work. I have a running test telling me how many players of the full array are within 100 current rating of their true rating. I would expect some portion of the population to be outside this range (as probability is not always going to go in their favor), but a full 40-45% of the population is outside of this range. I also have it outputting the maximum difference between true and current rating - and I have never seen this drop below 500! It hovers between 550-600, occasionally going over or under. I'm at a loss as to what to change - I've fiddled with the K and F values, where I start all the players, etc. but nothing changes the fact that eventually a good 40% of the population is outside the range. And it isn't that I have it playing too few games - it's now run through over 60 thousand games and the problem never disappears or really fluctuates. The full C# code, including everything except the XAML file and the Player class (pastebin is being very slow and I can only post two links, so I can't link to the XAML file): http://pastebin.com/rFcZRL84 The Player class: http://pastebin.com/4cJTdTRu I guess my question is did I do anything wrong? Is there a problem with the way I implemented the system, or is it just that Riot uses a significantly modified Elo system? I don't think it's the latter, as that still wouldn't explain the massive true and current rating differences to me, however.

    Read the article

  • C++ Set Erase Entry Question

    - by Wallace
    Hi. I encountered a problem here. I'm using C++ multiset. This is the test file. Score: 3-1 Ben Steven Score: 1-0 Ben Score: 0-0 Score: 1-1 Cole Score: 1-2 Ben I'm using while loop and ifstream (fin1) to read in from the test file above. multiset<string, less<string> > myset; while(!fin1.eof()) { fin1 >> scoreName; if(scoreName == "Score:") { //calculates number of matches played } else { goalCheck = scoreName.substr(1,1); if(goalCheck == "-") { string lGoal, rGoal; lGoal = scoreName.substr(0,1); rGoal = scoreName.substr(2,1); int leftGoal, rightGoal; leftGoal = atoi(lGoal.c_str()); rightGoal = atoi(rGoal.c_str()); if(leftGoal > rightGoal) //if team wins { //some computations } else if(leftGoal < rightGoal) //if team loses { //computations } else if(leftGoal == rightGoal) //if team draws { //computations } else { myset.insert(myset.begin(), scoreName); } } } I'm inserting all names into myset (regardless of wins/loses/draws) in my last else statement. But I only require the names of those matches who won/draw. Those names whose matches lost will not be included in myset. In the test file above, there's only one match that lost (1-2) and I wanted to remove "Ben". How can I do that? I tried to use myset.erase(), but I'm not sure how to get it point to Ben and remove it from myset. Any help is much appreciated. Thanks.

    Read the article

  • EF Forced Concurrency Checks

    - by Imran
    Hi, I have an issue with EF 4.0 that I hope someone can help with. I currently have an entity that I want to update in a last in wins fashion (i.e. ignore concurrency checks and just overwrite whats in the db with what is submitted). It seems Entity Framework not only includes the primary key of the entity in the where clause of the generated sql, but also any foreign key fields. This is annoying as it means that I don't get true last in wins semantics and need to know what value the fk field had before the update or I get a concurrency exception. I am aware that this can be short circuited by including a foreign key field as well as the navigation property on the entity. I would like to avoid this if possible as it's not a very clean solution. I was just wondering if there was any other way to override this behaviour? It seems like more of a bug than a feature. I have no problem with ef doing concurrency checks if I instruct it to do so but not being able to bypass concurrency completely is a bit of a hindrance as there are many valid scenarios where this is not needed

    Read the article

  • Will Apple bundle the Mono Touch runtime with every iPhone?

    - by Zoran Simic
    It strikes me as a good idea for Apple to negotiate with Novell and bundle the Mono Touch runtime (only the runtime of course) into every iPhone and iPod Touch. Perhaps even make it a "one time install" that automatically gets downloaded from the App Store the first time one downloads an app build with Mono Touch, making every subsequent Mono Touch app much lighter to download (without the runtime). Doing so would be similar in a way to adding Bootcamp to OS X: it would make it easier for C# developers to join the party, but that wouldn't mean these developers will all stick to C#... What convinced me to buy a Mac is Bootcamp - I figured I could always install Windows if I didn't like OS X (and I liked the hardware, so no problem there). 6 months later, I'm using OS X full time... Would there be any technical issues in doing so? I see only advantages for all parties, not one disadvantage to anyone (except maybe for the few unfortunate Apple employees who would have to test the crap out of the Mono Touch runtime before bundling it): Novell wins because Mono Touch becomes much more viable (Mono Touch apps become much lighter all of the sudden) Developers win because now there's one more tool in the tool belt Many C# Developers would be very interested by this Apple wins because that would bring even more attention to the platform, more revenue in developer fees, more potential great apps, etc Users win because less space is used by different Apps having copies of the same runtime accumulating on their devices Would there be a major technical obstacle in bundling Mono Touch to iPhone OS? Edit: Changed the title from "Should" to "Will Apple bundle the runtime?", I think the consensus on predicting that means a lot to those considering going with Mono Touch.

    Read the article

  • Being pressured to GOTO the dark-side

    - by Dan McG
    We have a situation at work where developers working on a legacy (core) system are being pressured into using GOTO statements when adding new features into existing code that is already infected with spagetti code. Now, I understand there may be arguments for using 'just one little GOTO' instead of spending the time on refactoring to a more maintainable solution. The issue is, this isolated 'just one little GOTO' isn't so isolated. At least once every week or so there is a new 'one little GOTO' to add. This codebase is already a horror to work with due to code dating back to or before 1984 being riddled with GOTOs that would make many Pastafarians believe it was inspired by the Flying Spagetti Monster itself. Unfortunately the language this is written in doesn't have any ready made refactoring tools, so it makes it harder to push the 'Refactor to increase productivity later' because short-term wins are the only wins paid attention to here... Has anyone else experienced this issue whereby everybody agrees that we cannot be adding new GOTOs to jump 2000 lines to a random section, but continually have Anaylsts insist on doing it just this one time and having management approve it? tldr; How can one go about addressing the issue of developers being pressured (forced) to continually add GOTO statements (by add, I mean add to jump to random sections many lines away) because it 'gets that feature in quicker'? I'm beginning to fear we may loses valuable developers to the raptors over this...

    Read the article

  • Resource placement (optimal strategy)

    - by blackened
    I know that this is not exactly the right place to ask this question, but maybe a wise guy comes across and has the solution. I'm trying to write a computer game and I need an algorithm to solve this question: The game is played between 2 players. Each side has 1.000 dollars. There are three "boxes" and each player writes down the amount of money he is going to place into those boxes. Then these amounts are compared. Whoever placed more money in a box scores 1 point (if draw half point each). Whoever scores more points wins his opponents 1.000 dollars. Example game: Player A: [500, 500, 0] Player B: [333, 333, 334] Player A wins because he won Box A and Box B (but lost Box C). Question: What is the optimal strategy to place the money? I have more questions to ask (algorithm related, not math related) but I need to know the answer to this one first. Update (1): After some more research I've learned that these type of problems/games are called Colonel Blotto Games. I did my best and found few (highly technical) documents on the subject. Cutting it short, the problem I have (as described above) is called simple Blotto Game (only three battlefields with symmetric resources). The difficult ones are the ones with, say, 10+ battle fields with non-symmetric resources. All the documents I've read say that the simple Blotto game is easy to solve. The thing is, none of them actually say what that "easy" solution is.

    Read the article

  • Optimization of SQL query regarding pair comparisons

    - by InfiniteSquirrel
    Hi, I'm working on a pair comparison site where a user loads a list of films and grades from another site. My site then picks two random movies and matches them against each other, the user selects the better of the two and a new pair is loaded. This gives a complete list of movies ordered by whichever is best. The database contains three tables; fm_film_data - this contains all imported movies fm_film_data(id int(11), imdb_id varchar(10), tmdb_id varchar(10), title varchar(255), original_title varchar(255), year year(4), director text, description text, poster_url varchar(255)) fm_films - this contains all information related to a user, what movies the user has seen, what grades the user has given, as well as information about each film's wins/losses for that user. fm_films(id int(11), user_id int(11), film_id int(11), grade int(11), wins int(11), losses int(11)) fm_log - this contains records of every duel that has occurred. fm_log(id int(11), user_id int(11), winner int(11), loser int(11)) To pick a pair to show the user, I've created a mySQL query that checks the log and picks a pair at random. SELECT pair.id1, pair.id2 FROM (SELECT part1.id AS id1, part2.id AS id2 FROM fm_films AS part1, fm_films AS part2 WHERE part1.id <> part2.id AND part1.user_id = [!!USERID!!] AND part2.user_id = [!!USERID!!]) AS pair LEFT JOIN (SELECT winner AS id1, loser AS id2 FROM fm_log WHERE fm_log.user_id = [!!USERID!!] UNION SELECT loser AS id1, winner AS id2 FROM fm_log WHERE fm_log.user_id = [!!USERID!!]) AS log ON pair.id1 = log.id1 AND pair.id2 = log.id2 WHERE log.id1 IS NULL ORDER BY RAND() LIMIT 1 This query takes some time to load, about 6 seconds in our tests with two users with about 800 grades each. I'm looking for a way to optimize this but still limit all duels to appear only once. The server runs MySQL version 5.0.90-community.

    Read the article

  • How can show data from another form

    - by Michael Quiles
    This is basically a tic tac toe game, and I have another form called Winner.cs when a player wins I want it to call the form (this part works) and then I want it to say xWinner.label =b1.text"" + has won the game!. the part I cant get to work is displaying the text in the winners form label. There's an example of a message box that commented out for reference instead of b1.text using System; using System.Collections.Generic; using System.Linq; using System.Text; using System.Windows.Forms; namespace MyGame { public class Result1 { static private int[,] Winners = new int[,] { {0,1,2}, {3,4,5}, {6,7,8}, {0,3,6}, {1,4,7}, {2,5,8}, {0,4,8}, {2,4,6}, }; static public bool CheckWinner(Button[] myControls) { bool gameOver = false; for (int i = 0; i < 8; i++) { int a = Winners[i, 0], b = Winners[i, 1], c = Winners[i, 2]; Button b1 = myControls[a], b2 = myControls[b], b3 = myControls[c]; if (b1.Text == "" || b2.Text == "" || b3.Text == "") continue; if (b1.Text == b2.Text && b2.Text == b3.Text) { b1.BackColor = b2.BackColor = b3.BackColor = System.Drawing.Color.LightCoral; b1.Font = b2.Font = b3.Font = new System.Drawing.Font("Microsoft Sans Serif", 32F, System.Drawing.FontStyle.Italic & System.Drawing.FontStyle.Bold, System.Drawing.GraphicsUnit.Point, ((System.Byte)(0))); gameOver = true; Form xWinnerForm = new xWinnerForm(); xWinnerForm.Show(); //MessageBox.Show(b1.Text + " .... Wins the game!", "Game End", MessageBoxButtons.OK); //break; } } return gameOver; } } }

    Read the article

  • Calculating percent "x/y * 100" always results in 0?

    - by Patrick Beninga
    In my assignment i have to make a simple version of Craps, for some reason the percentage assignments always produce 0 even when both variables are non 0, here is the code. import java.util.Random; Header, note the variables public class Craps { private int die1, die2,myRoll ,myBet,point,myWins,myLosses; private double winPercent,lossPercent; private Random r = new Random(); Just rolls two dies and produces their some. public int roll(){ die1 = r.nextInt(6)+1; die2 = r.nextInt(6)+1; return(die1 + die2); } The Play method, this just loops through the game. public void play(){ myRoll = roll(); point = 0; if(myRoll == 2 ||myRoll == 3 || myRoll == 12){ System.out.println("You lose!"); myLosses++; }else if(myRoll == 7 || myRoll == 11){ System.out.println("You win!"); myWins++; }else{ point = myRoll; do { myRoll = roll(); }while(myRoll != 7 && myRoll != point); if(myRoll == point){ System.out.println("You win!"); myWins++; }else{ System.out.println("You lose!"); myLosses++; } } } This is where the bug is, this is the tester method. public void tester(int howMany){ int i = 0; while(i < howMany){ play(); i++; } bug is right here in these assignments statements winPercent = myWins/i * 100; lossPercent = myLosses/i* 100; System.out.println("program ran "+i+" times "+winPercent+"% wins "+ lossPercent+"% losses with "+myWins+" wins and "+myLosses+" losses"); } }

    Read the article

  • Snow Leopard can see Windows shares in Finder but can't connect

    - by Randy Miller
    I have an iMac with the latest version of Snow Leopard on it. I have a NAS drive and a Windows machine that both show up in the Finder's 'Shared' section. However, if I click on them, Finder says "Connection Failed". Clicking on 'Connect As...' gives an error dialog that says "The server 'blah' may not exist or it is unavailable at this time." Points of interest: All machines are receiving their IP/DNS info from the router using DHCP. I have a Mac Mini on the same network that connects to the NAS drive and windows machine perfectly with no config (i.e. worked out of the box). Both Macs are on the same version of Snow Leopard. There is no password required to access the NAS share. I've never setup a WINS server on any machines and all machines are using 'workgroup' by default. I've tried putting "workgroup" in the Mac's workgroup entry and have tried leaving it blank, neither solves the problem. Here are some things I have tried: Finder-Connect To Server: smb:///share. This works, but by name does not. Terminal-mount_smbfs //@/share share. This also works by ip, but not be name, resulting in "mount_smbfs: server connection failed: No route to host". If I put the IP address of the NAS in the WINS server entry in the Mac's network setup, I can connect by name. It obviously seems to be a name resolution error, but I can't figure out why. The only thing that has changed since it used to work is that I got a new router that now gives out DHCP (all machines are dhcp clients) addresses of 192.168.x.x, but used to be 10.0.x.x. I've grep'd through everything that might have saved that old address, but can't find anything. It's also worth noting that the second Mac (the one that connects successfully) was added to the network after the router change. Please let me know if there are additional points of information needed to troubleshoot this further. Thanks, Randy

    Read the article

  • Snow Leopard and a Windows network

    - by JohnE
    I have just added a MBP to my home network and while I can connect to the internet etc, i cannot browse my home networked computers. I have already added a new location in my Network preferences yet when I goto the WINS tab, there is no dropdown to select my workgroup so i manually enter it. From what I have read, once I go to the finder and open the network, i should see the workgroup and systems...yet i do not. Any suggestions? Thanks.

    Read the article

  • Server 2008/Windows 7/Samba Unspecified error 80004005

    - by ancillary
    I have a Samba share on a LAN with 2008 PDC/DNS. Smb authenticates with AD and I have several Win7 Machines that can connect fine. I recently added a couple of new computers to the LAN which were imaged the same way (same software, etc.; different hardware so different drivers) as the other machines and they have the same policies set. I can not get the new machines to connect to the samba share no matter what. I am always met with either Unspecified Error 0x80004005 or Network Path not found. I've turned off the firewall; set LANMAN auth to respond to NTLM only/send LM & NTLM responses/use NTLM session security if negotiated in Local Sec Policy SEcurity Options; tried both ip and hostname to connect. SMB log shows that authentication succeeds; but then connection is immediately killed by the client. tcpdump shows nothing remarkable except that when trying to connect from the client via hostname there is an unknown packet type error: ack 201 win 255 NBT Session Packet: Unknown packet type 0xABData: (41 bytes) Here's a couple of lines from that error: 11:18:37.964991 IP 001-client.domain.local.49372 > smb.domain.local.netbios-ssn: P 1670:2146(476) ack 201 win 255 NBT Session Packet: Unknown packet type 0xABData: (41 bytes) [000] AA 46 96 FA D5 99 33 75 0C C4 20 CE 26 42 F3 61 \252F\226\372\325\2313u \014\304 \316&B\363a [010] F0 8C FB 65 18 17 40 A5 DB 42 BB 94 37 53 92 EC \360\214\373e\030\027@\245 \333B\273\2247S\222\354 [020] 55 98 7F C4 AE 3D 6B 10 C4 U\230\177\304\256=k\020 \304 11:18:37.964998 IP smb.domain.local.netbios-ssn > 001-client.domain.local.49372: . ack 2146 win 100 Here's smb.conf just in case (though don't see how if other machines are working fine): [global] workgroup = MYDOMAIN realm = MYDOMAIN.LOCAL server string = domain|smb share interfaces = eth1 security = ADS password server = 192.168.1.3 log level = 2 log file = /var/log/samba/%m.log smb ports = 139 strict locking = no load printers = No local master = No domain master = No wins server = 192.168.1.3 wins support = Yes idmap uid = 500-10000000 idmap gid = 500-10000000 winbind separator = + winbind enum users = Yes winbind enum groups = Yes winbind use default domain = Yes [samba-share1] comment = SMB Share path = /home/share/smb/ valid users = @"MYDOMAIN+Domain Users" admin users = @"MYDOMAIN+Domain Admins" guest ok = no read only = No create mask = 0765 force directory mode = 0777 Any ideas what else I could try or look for? Or what might be the problem? Thanks.

    Read the article

  • Why is cleartype so bad at high res?

    - by ULTRA_POROV
    Cleartype is great when displaying small text 10 - 16px HOWEVER when you display something above 20px it start's looking like shit. Just compare it to Photoshop. Photoshop rendering at small size is not very impressive, too blurry. But if you compare it at 20px + Photoshop wins all the time. Cleartype looks jaggy around the edges, almost like there is no cleartype at all. Can this be fixed, or is it just the way cleartype is?

    Read the article

  • Mouse not working in flash, Ubuntu!

    - by data_jepp
    I'm so sick of this problem. Some time back I changed to windows because of this, and now I'm back in Ubuntu and guess what. This still hasn't been fixed. How is it possible that something so simple yet crippling isn't fixed faster? This is why windows always wins in the end, because of stupid details like this.

    Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >