Search Results

Search found 131 results on 6 pages for 'wording'.

Page 5/6 | < Previous Page | 1 2 3 4 5 6  | Next Page >

• Changing where a resource is pulled during runtime?

  - by Brandon

  I have a website that goes out to multiple clients. Sometimes a client will insist on minor changes. For reasons beyond my control, I have to comply no matter how minor the request. Usually this isn't a problem, I would just create a client specific version of the user control or page and overwrite the default one during build time or make a configuration setting to handle it. Now that I am localizing the site, I'm curious about the best way to go about making minor wording changes. Lets say I have a resource file called Resources.resx that has 300 resources in it. It has a resource called Continue. English value is "Continue", the French value is "Continuez". Now one client, for whatever reason, wants it to say "Next" and "Après" and the others want to keep it the same. What is the best way to accomodate a request like this? (This is just a simple example). The only two ways I can think of is to Create another Resources.resx specific to the client, and replace the .dll during build time. Since I'd be completely replacing the dll, the new resource file would have to contain all 300 strings. The obvious problem being that I now have 2 resource files, each with 300 strings to maintain. Create a custom user control/page and change it to use a custom resource file. e.g. SignIn.ascx would be replaced during the build and it would pull its resources from ClientName.resx instead of Resources.resx. Are there any other things I could try? Is there any way to change it so that the application will always look in a ClientResources.resx file for the overridden values before actually look at the specified resource file?

  Read the article

• Run-time error 459 when using WithEvents with a class that implements another

  - by Ken Keenan

  I am developing a VBA project in Word and have encountered a problem with handling events when using a class that implements another. I define an empty class, IMyInterface: Public Sub Xyz() End Sub Public Event SomeEvent() And a class, MyClass that implements the above: Implements IMyInterface Public Event SomeEvent() Public Sub Xyz() ' ... code ... RaiseEvent SomeEvent End Sub Private Sub IMyInterface_Xyz() Xyz End Sub If I create a third class, OtherClass, that declares a member variable with the type of the interface class: Private WithEvents mMy As IMyInterface and try to initialize this variable with an instance of the implementing class: Set mMy = New MyClass I get a run-time error '459': This component doesn't support this set of events. The MSDN page for this error message states: "You tried to use a WithEvents variable with a component that can't work as an event source for the specified set of events. For example, you may be sinking events of an object, then create another object that Implements the first object. Although you might think you could sink the events from the implemented object, that isn't automatically the case. Implements only implements an interface for methods and properties." The above pretty much sums up what I'm trying to do. The wording, "that isn't automatically the case", rather than "this is flat-out impossible", seems to suggest that there is some bit of manual work I need to do to get it to work, but it doesn't tell me what! Does anybody know if this is possible in VBA?

  Read the article

• Can isdigit legitimately be locale dependent in C

  - by cdev

  In the section covering setlocale, the ANSI C standard states in a footnote that the only ctype.h functions whose behaviour is not affected by the current locale are isdigit and isxdigit. The Microsoft implementation of isdigit is locale dependent because, for example, in locales using code page 1250 isdigit only returns non-zero for characters in the range 0x30 ('0') - 0x39 ('9'), whereas in locales using code page 1252 isdigit also returns non-zero for the superscript digits 0xB2 ('²'), 0xB3 ('³') and 0xB9 ('¹'). Is Microsoft in violation of the C standard by making isdigit locale dependent? In this question I am primarily interested in C90, which Microsoft claims to conform to, rather than C99. Additional background: Microsoft's own documentation of setlocale incorrectly states that isdigit is unaffected by the LC_CTYPE part of the locale. The section of the C standard that covers the ctype.h functions contains some wording that I consider ambiguous: "The behavior of these functions is affected by the current locale. Those functions that have locale-specific aspects only when not in the "C" locale are noted below." I consider this ambiguous because it is unclear what it is trying to say about functions such as isdigit for which there are no notes about locale-specific aspects. It might be trying to say that such functions must be assumed to be locale dependent, in which case Microsoft's implementation of isdigit would be OK. (Except that the footnote I mentioned earlier seems to contradict this interpretation.)

  Read the article

• PHP sleep() excution sequence while echoeing.

  - by Babiker

  I have the following: echo time()."<br>"; sleep(1); echo time()."<br>"; sleep(1); echo time()."<br>"; I wrote the preceding code with intention to echo time()."<br>" ln 1,echo time()."<br>" ln 4, wait a final second and then echo the final time()."<br>". Altough the time bieng echoed is correct when it comes to the intervals between time(), all echo functions are echoeing after the total of the waiting period/parameters in each sleep function. This is how the script runs: Excutes. Waits 2 secons. echoes 1275540664 1275540665 1275540666 Notice the correct incrementation in time() being echoed. My question is why is it not behaving like expected to where it echoes, waits a second, echoes again, waits one final second and then echos the last parameter? I know my question is a little confusing due to my wording, but i will try my hardest to answer any comments regarding this, thanks.

  Read the article

• Why are argument substitutions not replaced during rescanning?

  - by James McNellis

  Consider the following macro definitions and invocation: #define x x[0] #define y(arg) arg y(x) This invocation expands to x[0] (tested on Visual C++ 2010, g++ 4.1, mcpp 2.7.2, and Wave). Why? Specifically, why does it not expand to x[0][0]? During macro replacement, A parameter in the replacement list...is replaced by the corresponding argument after all macros contained therein have been expanded. Before being substituted, each argument’s preprocessing tokens are completely macro replaced (C++03 §16.3.1/1). Evaluating the macro invocation, we take the following steps: The function-like macro y is invoked with x as the argument for its arg parameter The x in the argument is macro-replaced to become x[0] The arg in the replacement list is replaced by the macro-replaced value of the argument, x[0] The replacement list after substitution of all the parameters is x[0]. After all parameters in the replacement list have been substituted, the resulting preprocessing token sequence is rescanned...for more macro names to replace (C++03 §16.3.4/1). If the name of the macro being replaced is found during this scan of the replacement list...it is not replaced. Further, if any nested replacements encounter the name of the macro being replaced, it is not replaced (C++03 §16.3.4/2). The replacement list x[0] is rescanned (note that the name of the macro being replaced is y): x is identified as an object-like macro invocation x is replaced by x[0] Replacement stops at this point because of the rule in §16.3.4/2 preventing recursion. The replacement list after rescanning is x[0][0]. I have clearly misinterpreted something since all of the preprocessors I've tested say I am wrong. In addition, this example is a piece of a larger example in the C++0x FCD (at §16.3.5/5) and it too says that the expected replacement is x[0]. Why is x not replaced during rescanning? C99 and C++0x effectively have the same wording as C++03 in the quoted sections.

  Read the article

• Polling a web URL until event

  - by Jaxo

  I'm really sorry about the crappy title - if anybody has a better way of wording it, please edit it! I basically need to have a C# application run a function if the output of a URL is a certain value. For example, if the website says blue the background colour will be blue, red to make it red, etc. The problem is I don't want to spam my webserver with checks. The 4 bytes it downloads each time is negligible, but if I were to deploy this type of system on multiple computers, it would get slower and slower and the bandwidth would add up quickly. So my question is: How can my desktop application run a piece of code only when a web URL has a different output without checking each time? I can't use sockets, and any sort of LAN protocol won't end up working. My reasoning behind this potentially nefarious code is to be able to mute computers by updating a file on the website (as you may have seen in my previous question today, sorry!). I'd like it to be rather quick, and not have the refresh time minutes apart, a few seconds at the most would be ideal. How can I accomplish this? The website's code is easy, but getting the C# application to check when it changes is the part I'm stuck on. Nothing shows up on the website other than the command. Thanks!

  Read the article

• Dynamically assign class to paragraph

  - by user1684300

  How do you assign a class dynamically to a paragraph (via javascript/CSS) IF the paragraph contains the wording "Time Recorded:"? You'll notice that I have manually assigned the with class . However, I'd like to dynamically assign this class to any tag which contain the words "Time Recorded:". Please can you help ? Thank you. PLJ <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" /> <title>Untitled Document</title> <link href="css.css" rel="stylesheet" type="text/css" /> </head> <body> <script type="text/javascript"> if (document.all || document.getElementById){ //if IE4 or NS6+ document.write('<style type="text/css">') document.write('.dyncontent{display:none;}') document.write('</style>') } </script> <div class="right"> <ul> <li class="say agent public"> <p>Description line 1</p> <p class="dyncontent">Time Recorded: 5MIN(S)</p> <p>Another description line</p> </li> </ul> </div> </body> </html>

  Read the article

• One Common View In Every ViewController

  - by l3v

  I am having a hard time wording this when searching the internet so I am just going to ask the question. I have an options view in my app that slides into view when the user clicks a button. This options view will display app information like settings. I want this options view to be displayed on every view controller in my app. I do not want to copy and paste the code for the options view into every viewcontroller file. The options view has quite a few outlets and actions and also calls many delegates. How can I reuse this options view in all my view controllers without adding all the outlets, actions, and delegate methods each time? I was going to make a new file with public methods, but I would still have to copy the outlets. Would this public methods file have to include delegate methods as well then? Let me know if my question does not make sense. I am hoping there is a standard way of implementing something like this.

  Read the article

• How can I provide property-level string formatting?

  - by jhubsharp

  Not sure if the question wording is accurate, but here's what I want to do: I want to databind a class with some strings in it: class MyClass { public string MyProperty { get; set; } public string MyProperty2 { get; set; } } When databinding, everything behaves normally. On the back end, I'm writing to a file and I want MyProperty2 to always be encrypted using some encryption algorithm. I want my back-end code to write each string without needing to know that encryption is required (I want the class to know it should be encrypted, not the consumer). Can I do this with a type converter, or something similar? EDIT: There are other scenarios as well. Some booleans I want to format as "Y" or "N", other booleans I want formatted as "Enabled" / "Disabled", etc. I can write (and have written) helper methods and let the file writer call the helper methods as appropriate, I'm just wondering if there's a way to do this without the file writer needing to know which objects need which kind of formatting and let the objects tell that to the file writer.

  Read the article

• Reality behind wireless security - the weakness of encrypting

  - by Cawas

  I welcome better key-wording here, both on tags and title, and I'll add more links as soon as possible. For some years I'm trying to conceive a wireless environment that I'd setup anywhere and advise for everyone, including from big enterprises to small home networks of 1 machine. I've always had the feeling using any kind of the so called "wireless security" methods is actually a bad design. I'm talking mostly about encrypting and pass-phrasing (which are actually two different concepts), since I won't even considering hiding SSID and mac filtering. I understand it's a natural way of thinking. With cable networking nobody can access the network unless they have access to the physical cable, so you're "secure" in the physical way. In a way, encrypting is for wireless what walling (building walls) is for the cables. And giving pass-phrases is adding a door with a key. But the cabling without encryption is also insecure. Someone just need to plugin and get your data! And while I can see the use for encrypting data, I don't think it's a security measure in wireless networks. As I said elsewhere, I believe we should encrypt only sensitive data regardless of wires. And passwords should be added to the users, always, not to wifi. For securing files, truly, best solution is backup. Sure all that doesn't happen that often, but I won't consider the most situations where people just don't care. I think there are enough situations where people actually care on using passwords on their OS users, so let's go with that in mind. For being able to break the walls or the door someone will need proper equipment such as a hammer or a master key of some kind. Same is true for breaking the wireless walls in the analogy. But, I'd say true data security is at another place. I keep promoting the Fonera concept as an instance. It opens up a free wifi port, if you choose so, and anyone can connect to the internet through that, without having any access to your LAN. It also uses a QoS which will never let your bandwidth drop from that public usage. That's security, and it's open. And who doesn't want to be able to use internet freely anywhere you can find wifi spots? I have 3G myself, but that's beyond the point here. If I have a wifi at home I want to let people freely use it for internet as to not be an hypocrite and even guests can easily access my files, just for reading access, so I don't need to keep setting up encryption and pass-phrases that are not whole compatible. I'll probably be bashed for promoting the non-usage of WPA 2 with AES or whatever, but I wanted to know from more experienced (super) users out there: what do you think? Is there really a need for encryption to have true wireless security?

  Read the article

• Slide Creation Checklist

  - by Daniel Moth

  PowerPoint is a great tool for conference (large audience) presentations, which is the context for the advice below. The #1 thing to keep in mind when you create slides (at least for conference sessions), is that they are there to help you remember what you were going to say (the flow and key messages) and for the audience to get a visual reminder of the key points. Slides are not there for the audience to read what you are going to say anyway. If they were, what is the point of you being there? Slides are not holders for complete sentences (unless you are quoting) – use Microsoft Word for that purpose either as a physical handout or as a URL link that you share with the audience. When you dry run your presentation, if you find yourself reading the bullets on your slide, you have missed the point. You have a message to deliver that can be done regardless of your slides – remember that. The focus of your audience should be on you, not the screen. Based on that premise, I have created a checklist that I go over before I start a new deck and also once I think my slides are ready. Turn AutoFit OFF. I cannot stress this enough. For each slide, explicitly pick a slide layout. In my presentations, I only use one Title Slide, Section Header per demo slide, and for the rest of my slides one of the three: Title and Content, Title Only, Blank. Most people that are newbies to PowerPoint, get whatever default layout the New Slide creates for them and then start deleting and adding placeholders to that. You can do better than that (and you'll be glad you did if you also follow item #11 below). Every slide must have an image. Remove all punctuation (e.g. periods, commas) other than exclamation points and question marks (! ?). Don't use color or other formatting (e.g. italics, bold) for text on the slide. Check your animations. Avoid animations that hide elements that were on the slide (instead use a new slide and transition). Ensure that animations that bring new elements in, bring them into white space instead of over other existing elements. A good test is to print the slide and see that it still makes sense even without the animation. Print the deck in black and white choosing the "6 slides per page" option. Can I still read each slide without losing any information? If the answer is "no", go back and fix the slides so the answer becomes "yes". Don't have more than 3 bullet levels/indents. In other words: you type some text on the slide, hit 'Enter', hit 'Tab', type some more text and repeat at most one final time that sequence. Ideally your outer bullets have only level of sub-bullets (i.e. one level of indentation beneath them). Don't have more than 3-5 outer bullets per slide. Space them evenly horizontally, e.g. with blank lines in between. Don't wrap. For each bullet on all slides check: does the text for that bullet wrap to a second line? If it does, change the wording so it doesn't. Or create a terser bullet and make the original long text a sub-bullet of that one (thus decreasing the font size, but still being consistent) and have no wrapping. Use the same consistent fonts (i.e. Font Face, Font Size etc) throughout the deck for each level of bullet. In other words, don't deviate form the PowerPoint template you chose (or that was chosen for you). Go on each slide and hit 'Reset'. 'Reset' is a button on the 'Home' tab of the ribbon or you can find the 'Reset Slide' menu when you right click on a slide on the left 'Slides' list. If your slides can survive doing that without you "fixing" things after the Reset action, you are golden! For each slide ask yourself: if I had to replace this slide with a single sentence that conveys the key message, what would that sentence be? This exercise leads you to merge slides (where the key message is split) or split a slide into many, if there were too many key messages on the slide in the first place. It can also lead you to redesign a slide so the text on it really is just explanation or evidence for the key message you are trying to convey. Get the length right. Is the length of this deck suitable for the time you have been given to present? If not, cut content! It is far better to deliver less in a relaxed, polished engaging, memorable way than to deliver in great haste more content. As a rule of thumb, multiply 2 minutes by the number of slides you have, add the time you need for each demo and check if that add to more than the time you have allotted. If it does, start cutting content – we've all been there and it has to be done. As always, rules and guidelines are there to be bent and even broken some times. Start with the above and on a slide-by-slide basis decide which rules you want to bend. That is smarter than throwing all the rules out from the start, right? Comments about this post welcome at the original blog.

  Read the article

• Joining on NULLs

  - by Dave Ballantyne

  A problem I see on a fairly regular basis is that of dealing with NULL values.  Specifically here, where we are joining two tables on two columns, one of which is ‘optional’ ie is nullable.  So something like this: i.e. Lookup where all the columns are equal, even when NULL.   NULL’s are a tricky thing to initially wrap your mind around.  Statements like “NULL is not equal to NULL and neither is it not not equal to NULL, it’s NULL” can cause a serious brain freeze and leave you a gibbering wreck and needing your mummy. Before we plod on, time to setup some data to demo against. Create table #SourceTable ( Id integer not null, SubId integer null, AnotherCol char(255) not null ) go create unique clustered index idxSourceTable on #SourceTable(id,subID) go with cteNums as ( select top(1000) number from master..spt_values where type ='P' ) insert into #SourceTable select Num1.number,nullif(Num2.number,0),'SomeJunk' from cteNums num1 cross join cteNums num2 go Create table #LookupTable ( Id integer not null, SubID integer null ) go insert into #LookupTable Select top(100) id,subid from #SourceTable where subid is not null order by newid() go insert into #LookupTable Select top(3) id,subid from #SourceTable where subid is null order by newid() If that has run correctly, you will have 1 million rows in #SourceTable and 103 rows in #LookupTable.  We now want to join one to the other. First attempt – Lets just join select * from #SourceTable join #LookupTable on #LookupTable.id = #SourceTable.id and #LookupTable.SubID = #SourceTable.SubID OK, that’s a fail.  We had 100 rows back,  we didn’t correctly account for the 3 rows that have null values.  Remember NULL <> NULL and the join clause specifies SUBID=SUBID, which for those rows is not true. Second attempt – Lets deal with those pesky NULLS select * from #SourceTable join #LookupTable on #LookupTable.id = #SourceTable.id and isnull(#LookupTable.SubID,0) = isnull(#SourceTable.SubID,0) OK, that’s the right result, well done and 99.9% of the time that is where its left. It is a relatively trivial CPU overhead to wrap ISNULL around both columns and compare that result, so no problems.  But, although that’s true, this a relational database we are using here, not a procedural language.  SQL is a declarative language, we are making a request to the engine to get the results we want.  How we ask for them can make a ton of difference. Lets look at the plan for our second attempt, specifically the clustered index seek on the #SourceTable   There are 2 predicates. The ‘seek predicate’ and ‘predicate’.  The ‘seek predicate’ describes how SQLServer has been able to use an Index.  Here, it has been able to navigate the index to resolve where ID=ID.  So far so good, but what about the ‘predicate’ (aka residual probe) ? This is a row-by-row operation.  For each row found in the index matching the Seek Predicate, the leaf level nodes have been scanned and tested using this logical condition.  In this example [Expr1007] is the result of the IsNull operation on #LookupTable and that is tested for equality with the IsNull operation on #SourceTable.  This residual probe is quite a high overhead, if we can express our statement slightly differently to take full advantage of the index and make the test part of the ‘Seek Predicate’. Third attempt – X is null and Y is null So, lets state the query in a slightly manner: select * from #SourceTable join #LookupTable on #LookupTable.id = #SourceTable.id and ( #LookupTable.SubID = #SourceTable.SubID or (#LookupTable.SubID is null and #SourceTable.SubId is null) ) So its slightly wordier and may not be as clear in its intent to the human reader, that is what comments are for, but the key point is that it is now clearer to the query optimizer what our intention is. Let look at the plan for that query, again specifically the index seek operation on #SourceTable No ‘predicate’, just a ‘Seek Predicate’ against the index to resolve both ID and SubID.  A subtle difference that can be easily overlooked.  But has it made a difference to the performance ? Well, yes , a perhaps surprisingly high one. Clever query optimizer well done. If you are using a scalar function on a column, you a pretty much guaranteeing that a residual probe will be used.  By re-wording the query you may well be able to avoid this and use the index completely to resolve lookups. In-terms of performance and scalability your system will be in a much better position if you can.

  Read the article

• .NET Extension Objects with XSLT -- how to iterate over a collection?

  - by Pandincus

  Help me, Stackoverflow! I have a simple .NET 3.5 console app that reads some data and sends emails. I'm representing the email format in an XSLT stylesheet so that we can easily change the wording of the email without needing to recompile the app. We're using Extension Objects to pass data to the XSLT when we apply the transformation: <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:msxsl="urn:schemas-microsoft-com:xslt" exclude-result-prefixes="msxsl" xmlns:EmailNotification="ext:EmailNotification"> -- this way, we can have statements like: <p> Dear <xsl:value-of select="EmailNotification:get_FullName()" />: </p> The above works fine. I pass the object via code like this (some irrelevant code omitted for brevity): // purely an example structure public struct EmailNotification { public string FullName { get; set; } } // Somewhere in some method ... var notification = new Notification("John Smith"); // ... XsltArgumentList xslArgs = new XsltArgumentList(); xslArgs.AddExtensionObject("ext:EmailNotification", notification); // ... // The part where it breaks! (This is where we do the transformation) xslt.Transform(fakeXMLDocument.CreateNavigator(), xslArgs, XmlWriter.Create(transformedXMLString)); So, all of the above code works. However, I wanted to get a little fancy (always my downfall) and pass a collection, so that I could do something like this: <p>The following accounts need to be verified:</p> <xsl:for-each select="EmailNotification:get_SomeCollection()"> <ul> <li> <xsl:value-of select="@SomeAttribute" /> </li> </ul> <xsl:for-each> When I pass the collection in the extension object and attempt to transform, I get the following error: "Extension function parameters or return values which have Clr type 'String[]' are not supported." or List, or IEnumerable, or whatever I try to pass in. So, my questions are: How can I pass in a collection to my XSLT? What do I put for the xsl:value-of select="" inside the xsl:for-each ? Is what I am trying to do impossible?

  Read the article

• How do we simplify this kind of code in Java? Something like macros in C?

  - by Terry Li

  public static boolean diagonals(char[][] b, int row, int col, int l) { int counter = 1; // because we start from the current position char charAtPosition = b[row][col]; int numRows = b.length; int numCols = b[0].length; int topleft = 0; int topright = 0; int bottomleft = 0; int bottomright = 0; for (int i=row-1,j=col-1;i>=0 && j>=0;i--,j--) { if (b[i][j]==charAtPosition) { topleft++; } else { break; } } for (int i=row-1,j=col+1;i>=0 && j<=numCols;i--,j++) { if (b[i][j]==charAtPosition) { topright++; } else { break; } } for (int i=row+1,j=col-1;i<=numRows && j>=0;i++,j--) { if (b[i][j]==charAtPosition) { bottomleft++; } else { break; } } for (int i=row+1,j=col+1;i<=numRows && j<=numCols;i++,j++) { if (b[i][j]==charAtPosition) { bottomright++; } else { break; } } return topleft + bottomright + 1 >= l || topright + bottomleft + 1 >= l; //in this case l is 5 } After I was done posting the code above here, I couldn't help but wanted to simplify the code by merging the four pretty much the same loops into one method. Here's the kind of method I want to have: public int countSteps(char horizontal, char vertical) { } Two parameters horizontal and vertical can be either + or - to indicate the four directions to walk in. What I want to see if possible at all is i++; is generalized to i horizontal horizontal; when horizontal taking the value of +. What I don't want to see is if or switch statements, for example: public int countSteps(char horizontal, char vertical) { if (horizontal == '+' && vertical == '-') { for (int i=row-1,j=col+1;i>=0 && j<=numCols;i--,j++) { if (b[i][j]==charAtPosition) { topright++; } else { break; } } } else if (horizontal == '+' && vertical == '+') { for (int i=row+1,j=col+1;i>=0 && j<=numCols;i++,j++) { if (b[i][j]==charAtPosition) { topright++; } else { break; } } } else if () { } else { } } Since it is as tedious as the original one. Note also that the comparing signs for the loop condition i>=0 && j<=numCols; for example, >= && <= have correspondence with the value combination of horizontal and vertical. Sorry for my bad wording, please let me know if anything is not clear.

  Read the article

• ZF Autoloader to load ancestor and requested class

  - by Pekka

  I am integrating Zend Framework into an existing application. I want to switch the application over to Zend's autoloading mechanism to replace dozens of include() statements. I have a specific requirement for the autoloading mechanism, though. Allow me to elaborate. The existing application uses a core library (independent from ZF), for example: /Core/Library/authentication.php /Core/Library/translation.php /Core/Library/messages.php this core library is to remain untouched at all times and serves a number of applications. The library contains classes like class ancestor_authentication { ... } class ancestor_translation { ... } class ancestor_messages { ... } in the application, there is also a Library directory: /App/Library/authentication.php /App/Library/translation.php /App/Library/messages.php these includes extend the ancestor classes and are the ones that actually get instantiated in the application. class authentication extends ancestor_authentication { } class translation extends ancestor_translation { } class messages extends ancestor_messages { } usually, these class definitions are empty. They simply extend their ancestors and provide the class name to instantiate. $authentication = new authentication(); The purpose of this solution is to be able to easily customize aspects of the application without having to patch the core libraries. Now, the autoloader I need would have to be aware of this structure. When an object of the class authentication is requested, the autoloader would have to: 1. load /Core/Library/authentication.php 2. load /App/Library/authentication.php My current approach would be creating a custom function, and binding that to Zend_Loader_Autoloader for a specific namespace prefix. Is there already a way to do this in Zend that I am overlooking? The accepted answer in this question kind of implies there is, but that may be just a bad choice of wording. Are there extensions to the Zend Autoloader that do this? Can you - I am new to ZF - think of an elegant way, conforming with the spirit of the framework, of extending the Autoloader with this functionality? I'm not necessary looking for a ready-made implementation, some pointers (This should be an extension to the xyz method that you would call like this...) would already be enough.

  Read the article

• PHP Changing Class Variables Outside of Class

  - by Jamie Bicknell

  Apologies for the wording on this question, I'm having difficulties explaining what I'm after, but hopefully it makes sense. Let's say I have a class, and I wish to pass a variable through one of it's methods, then I have another method which outputs this variable. That's all fine, but what I'm after is that if I update the variable which was originally passed, and do this outside the class methods, it should be reflected in the class. I've created a very basic example: class Test { private $var = ''; function setVar($input) { $this->var = $input; } function getVar() { echo 'Var = ' . $this->var . '<br />'; } } If I run $test = new Test(); $string = 'Howdy'; $test->setVar($string); $test->getVar(); I get Var = Howdy However, this is the flow I would like: $test = new Test(); $test->setVar($string); $string = 'Hello'; $test->getVar(); $string = 'Goodbye'; $test->getVar(); Expected output to be Var = Hello Var = Goodbye I don't know what the correct naming of this would be, and I've tried using references to the original variable but no luck. I've come across this in the past, with the PDO prepared statements, see Example #2 $stmt = $dbh->prepare("INSERT INTO REGISTRY (name, value) VALUES (?, ?)"); $stmt->bindParam(1, $name); $stmt->bindParam(2, $value); // insert one row $name = 'one'; $value = 1; $stmt->execute(); // insert another row with different values $name = 'two'; $value = 2; $stmt->execute(); I know I can change the variable to public and do the following, but it isn't quite the same as how the PDO class handles it, and I'm really looking to mimic that behaviour. $test = new Test(); $test->setVar($string); $test->var = 'Hello'; $test->getVar(); $test->var = 'Goodbye'; $test->getVar(); Any help, ideas, pointers, or advice would be greatly appreciated, thanks.

  Read the article

• How do I mock/fake/replace/stub a base class at unit-test time in C#?

  - by MatthewMartin

  UPDATE: I've changed the wording of the question. Previously it was a yes/no question about if a base class could be changed at runtime. I may be working on mission impossible here, but I seem to be getting close. I want to extend a ASP.NET control, and I want my code to be unit testable. Also, I'd like to be able to fake behaviors of a real Label (namely things like ID generation, etc), which a real Label can't do in an nUnit host. Here a working example that makes assertions on something that depends on a real base class and something that doesn't-- in a more realistic unit test, the test would depend on both --i.e. an ID existing and some custom behavior. Anyhow the code says it better than I can: public class LabelWrapper : Label //Runtime //public class LabelWrapper : FakeLabel //Unit Test time { private readonly LabelLogic logic= new LabelLogic(); public override string Text { get { return logic.ProcessGetText(base.Text); } set { base.Text=logic.ProcessSetText(value); } } } //Ugh, now I have to test FakeLabelWrapper public class FakeLabelWrapper : FakeLabel //Unit Test time { private readonly LabelLogic logic= new LabelLogic(); public override string Text { get { return logic.ProcessGetText(base.Text); } set { base.Text=logic.ProcessSetText(value); } } } [TestFixture] public class UnitTest { [Test] public void Test() { //Wish this was LabelWrapper label = new LabelWrapper(new FakeBase()) LabelWrapper label = new LabelWrapper(); //FakeLabelWrapper label = new FakeLabelWrapper(); label.Text = "ToUpper"; Assert.AreEqual("TOUPPER",label.Text); StringWriter stringWriter = new StringWriter(); HtmlTextWriter writer = new HtmlTextWriter(stringWriter); label.RenderControl(writer); Assert.AreEqual(1,label.ID); Assert.AreEqual("<span>TOUPPER</span>", stringWriter.ToString()); } } public class FakeLabel { virtual public string Text { get; set; } public void RenderControl(TextWriter writer) { writer.Write("<span>" + Text + "</span>"); } } //System Under Test internal class LabelLogic { internal string ProcessGetText(string value) { return value.ToUpper(); } internal string ProcessSetText(string value) { return value.ToUpper(); } }

  Read the article

• Is there a way to apply a CSS class from within a style?

  - by zashu

  I'm trying to be more modular in my CSS style sheets and was wondering if there is some feature like an include or apply that allows the author to apply a set of styles dynamically. Since I am having a hard time wording the question, perhaps an example will make more sense. Let's say, for example, I have the following CSS: .red {color:#e00b0b} #footer a {font-size:0.8em} h2 {font-size:1.4em; font-weight:bold;} In my page, let's say that I want both the footer links and h2 elements to use the special red color (there may be other locations I would like to use it as well). Ideally, I would like to do something like the following: .red {color:#e00b0b} #footer a {font-size:0.8em; apply-class:".red";} h2 {font-size:1.4em; font-weight:bold; apply-class:".red";} To me, this feels "modular" in a way because I can make modifications to the .red class without having to worry so much about where it is used, and other locations can use the styles in that class without worrying about, specifically, what they are. I understand that I have the following options and have included why, in my fairly inexperienced opinion, they are less-than-perfect: Add the color property to every element I want to be that color. Not ideal because, if I change the color, I have to update every rule to match the new color. Add the red class to every element I want to be red. Not ideal because it means that my HTML is dictating presentation. Create an additional rule that selects every element I want to be red and apply the color property to that. Not ideal because it is harder to find all of the rules that style a specific element, making maintenance more of a challenge Maybe I'm just being an ass and the following options are the only options and I should stick with them. I'm wondering, however, if the "ideal" (well, my ideal) method exists and, if so, what is the proper syntax? If it doesn't exist, option 3 above seems like my best bet. However, I would like to get confirmation.

  Read the article

• Is there really a need for encryption to have true wireless security? [closed]

  - by Cawas

  I welcome better key-wording here, both on tags and title. I'm trying to conceive a free, open and secure network environment that would work anywhere, from big enterprises to small home networks of just 1 machine. I think since wireless Access Points are the most, if not only, true weak point of a Local Area Network (let's not consider every other security aspect of having internet) there would be basically two points to consider here: Having an open AP for anyone to use the internet through Leaving the whole LAN also open for guests to be able to easily read (only) files on it, and even a place to drop files on Considering these two aspects, once everything is done properly... What's the most secure option between having that, or having just an encrypted password-protected wifi? Of course "both" would seem "more secure". But it shouldn't actually be anything substantial. That's the question, but I think it may need more elaborating on. If you don't think so, please feel free to skip the next (long) part. Elaborating more on the two aspects ... I've always had the feeling using any kind of the so called "wireless security" methods is actually a bad design. I'm talking mostly about encrypting and pass-phrasing (which are actually two different concepts), since I won't even consider hiding SSID and mac filtering. I understand it's a natural way of thinking. With cable networking nobody can access the network unless they have access to the physical cable, so you're "secure" in the physical way. In a way, encrypting is for wireless what building walls is for the cables. And giving pass-phrases would be adding a door with a key. But the cabling without encryption is also insecure. If someone plugin all the data is right there. So, while I can see the use for encrypting data, I don't think it's a security measure in wireless networks. It's wasting resources for too little gain. I believe we should encrypt only sensitive data regardless of wires. That's already done with HTTPS, so I don't really need to encrypt my torrents, for instance. They're torrents, they are meant to be freely shared! As for using passwords, they should be added to the users, always. Not to wifi. For securing files, truly, best solution is backup. Sure all that doesn't happen that often, but I won't consider the most situations where people just don't care. I think there are enough situations where we actually use passwords on our OS users, so let's go with that in mind. I keep promoting the Fonera concept as an instance. It opens up a free wifi port, if you choose so, and anyone can connect to the internet through that, without having any access to your LAN. It also uses a QoS which will never let your bandwidth drop from that public usage. That's security, and it's open. But it's lacking the second aspect. I'll probably be bashed for promoting the non-usage of WPA 2 with AES or whatever, but I wanted to know from more experienced (super) users out there: what do you think?

  Read the article

• [GEEK SCHOOL] Network Security 4: Windows Firewall: Your System’s Best Defense

  - by Ciprian Rusen

  If you have your computer connected to a network, or directly to your Internet connection, then having a firewall is an absolute necessity. In this lesson we will discuss the Windows Firewall – one of the best security features available in Windows! The Windows Firewall made its debut in Windows XP. Prior to that, Windows system needed to rely on third-party solutions or dedicated hardware to protect them from network-based attacks. Over the years, Microsoft has done a great job with it and it is one of the best firewalls you will ever find for Windows operating systems. Seriously, it is so good that some commercial vendors have decided to piggyback on it! Let’s talk about what you will learn in this lesson. First, you will learn about what the Windows Firewall is, what it does, and how it works. Afterward, you will start to get your hands dirty and edit the list of apps, programs, and features that are allowed to communicate through the Windows Firewall depending on the type of network you are connected to. Moving on from there, you will learn how to add new apps or programs to the list of allowed items and how to remove the apps and programs that you want to block. Last but not least, you will learn how to enable or disable the Windows Firewall, for only one type of networks or for all network connections. By the end of this lesson, you should know enough about the Windows Firewall to use and manage it effectively. What is the Windows Firewall? Windows Firewall is an important security application that’s built into Windows. One of its roles is to block unauthorized access to your computer. The second role is to permit authorized data communications to and from your computer. Windows Firewall does these things with the help of rules and exceptions that are applied both to inbound and outbound traffic. They are applied depending on the type of network you are connected to and the location you have set for it in Windows, when connecting to the network. Based on your choice, the Windows Firewall automatically adjusts the rules and exceptions applied to that network. This makes the Windows Firewall a product that’s silent and easy to use. It bothers you only when it doesn’t have any rules and exceptions for what you are trying to do or what the programs running on your computer are trying to do. If you need a refresher on the concept of network locations, we recommend you to read our How-To Geek School class on Windows Networking. Another benefit of the Windows Firewall is that it is so tightly and nicely integrated into Windows and all its networking features, that some commercial vendors decided to piggyback onto it and use it in their security products. For example, products from companies like Trend Micro or F-Secure no longer provide their proprietary firewall modules but use the Windows Firewall instead. Except for a few wording differences, the Windows Firewall works the same in Windows 7 and Windows 8.x. The only notable difference is that in Windows 8.x you will see the word “app” being used instead of “program”. Where to Find the Windows Firewall By default, the Windows Firewall is turned on and you don’t need to do anything special in order for it work. You will see it displaying some prompts once in a while but they show up so rarely that you might forget that is even working. If you want to access it and configure the way it works, go to the Control Panel, then go to “System and Security” and select “Windows Firewall”. Now you will see the Windows Firewall window where you can get a quick glimpse on whether it is turned on and the type of network you are connected to: private networks or public network. For the network type that you are connected to, you will see additional information like: The state of the Windows Firewall How the Windows Firewall deals with incoming connections The active network When the Windows Firewall will notify you You can easily expand the other section and view the default settings that apply when connecting to networks of that type. If you have installed a third-party security application that also includes a firewall module, chances are that the Windows Firewall has been disabled, in order to avoid performance issues and conflicts between the two security products. If that is the case for your computer or device, you won’t be able to view any information in the Windows Firewall window and you won’t be able to configure the way it works. Instead, you will see a warning that says: “These settings are being managed by vendor application – Application Name”. In the screenshot below you can see an example of how this looks. How to Allow Desktop Applications Through the Windows Firewall Windows Firewall has a very comprehensive set of rules and most Windows programs that you install add their own exceptions to the Windows Firewall so that they receive network and Internet access. This means that you will see prompts from the Windows Firewall on occasion, generally when you install programs that do not add their own exceptions to the Windows Firewall’s list. In a Windows Firewall prompt, you are asked to select the network locations to which you allow access for that program: private networks or public networks. By default, Windows Firewall selects the checkbox that’s appropriate for the network you are currently using. You can decide to allow access for both types of network locations or just to one of them. To apply your setting press “Allow access”. If you want to block network access for that program, press “Cancel” and the program will be set as blocked for both network locations. At this step you should note that only administrators can set exceptions in the Windows Firewall. If you are using a standard account without administrator permissions, the programs that do not comply with the Windows Firewall rules and exceptions are automatically blocked, without any prompts being shown. You should note that in Windows 8.x you will never see any Windows Firewall prompts related to apps from the Windows Store. They are automatically given access to the network and the Internet based on the assumption that you are aware of the permissions they require based on the information displayed by the Windows Store. Windows Firewall rules and exceptions are automatically created for each app that you install from the Windows Store. However, you can easily block access to the network and the Internet for any app, using the instructions in the next section. How to Customize the Rules for Allowed Apps Windows Firewall allows any user with an administrator account to change the list of rules and exceptions applied for apps and desktop programs. In order to do this, first start the Windows Firewall. On the column on the left, click or tap “Allow an app or feature through Windows Firewall” (in Windows 8.x) or “Allow a program or feature through Windows Firewall” (in Windows 7). Now you see the list of apps and programs that are allowed to communicate through the Windows Firewall. At this point, the list is grayed out and you can only view which apps, features, and programs have rules that are enabled in the Windows Firewall.

  Read the article

• Guide to Downloading Oracle Fusion Middleware 11g Products

  - by Daniel Mortimer

  IntroductionThe idea of writing a blog about downloading software seems a bit strange .. right? After all, surely just give me the web download link and away I go!? Unfortunately, life is not so simple if you are a DBA or Systems Administrator tasked with staging Oracle Fusion Middleware 11g products for your chosen business technology stack. Here are the challenges: Oracle Fusion Middleware is not a single product, it is a family of products - a media pack with many many "disks" - which ones do I pick? Are the products I pick certified / supported on my chosen platform? Which download site do I use? I need to be on the latest and greatest - how do I get hold of the latest product patch set? The purpose of this blog is to give you a roadmap to get you through these challenges. Oracle Fusion Middleware 11g - A Product SuiteThe first thing to appreciate is that Oracle Fusion Middleware 11g is not a single product. It is a product suite, an umbrella label for many products. Typically you don't download the whole media pack - well not unless you want to stage 124 Parts - a total of 68 Gig  - instead you pick the pieces that are required for your chosen Middleware solution. Therefore, you need to research / understand which products are required to build your solution. In this respect, before you go looking for the software pick and persue the product guide from the table below which matches your situation:  Installing a New / Vanilla FMW 11g architecture Oracle Fusion Middleware Installation Planning Guide 11g  Upgrading Oracle Application Server 10g to FMW 11g Oracle Fusion Middleware Upgrade Planning Guide 11g  Patching an existing FMW 11g architecture Oracle Fusion Middleware Patching Guide 11g Certification Information Ok, so now you have an idea of what Fusion Middleware products you need. It's time to check whether these products are certified against your chosen platform. There are two places to find this information:My Oracle Support Certification Tab PageFigure 1.1 My Oracle Support Certification Tab Page - "Search on SOA Suite" Figure 1.2 My Oracle Support Certification Tab Page - "SOA Suite Search Result" The FMW 11g Certification Central Hub (in the format of xls spreadsheet)Figure 2: Screenshot of FMW 11g Release 1 Certification xls spreadsheet Hints / Tips: Fusion Middleware 11g certification information has only recently been added into the Certification Tab page and I think it is the more friendly way to access the information. However, due to some restrictions with the Certification Tab page interface some of the more, let's say obscure certification information, is still to be only found in the Certification spreadsheet. Be aware that to find certification information via the My Oracle Support Certification Tab page you must enter the FMW 11g product name e.g. "Oracle SOA Suite". Do NOT enter "Oracle Fusion Middleware". The certification information does not exist at this product suite level.  For example, if you are building a solution which includes Oracle SOA Suite Oracle WebCenter then you will have to look up the certification information for each product in turn.After choosing the product name, select the latest patch set version. This will not only tell you whether your chosen product is available at that patch set version but provide the certification information relevant to that version.  If the product is not available under the latest patch set version, seek the information under previous patch set versions. Important: Make a careful note of the Oracle WebLogic Server version which is certified with your chosen product and patch set version. Oracle WebLogic Server is the core component of a Oracle Fusion Middleware 11g home. It is important therefore to ensure later on that you download the version of Oracle WebLogic Server which is compatible and certified with your chosen product and patch set version.Also - sorry to state the obvious, but please do not take certification information from the screenshots above. The screenshots are only good for the time they were entered into the blog. To ensure you have the latest information, interactively look up the certification details. For more information about finding certification information, bookmark and readMy Oracle Support Certification Tool for Oracle Fusion Middleware Products [Doc ID 1368736.1]How to Find Certification Details for Oracle Application Server 10g and Oracle Fusion Middleware 11g [Doc ID 431578.1] Downloading the Software Now you should be ready to download the software. There are two download locations Oracle Software Delivery Cloud (formerly known as E-Delivery)Figure 3 - Screenshot of Fusion Middleware Download from Delivery CloudOracle Fusion Middleware Download Page on Oracle Technology NetworkFigure 4 - Screenshot of OTN Product Download Screen Hints / Tips: Your choice of download location should be primarily driven by your licensing needs. Take note of the wording on the OTN site - to quote:"The downloads below are provided for evaluators under the OTN License Agreement. Licensed customers should download their software via our Oracle Software Delivery Cloud site, which offers different license terms."However, it has to be said that the presentation of the most of the product download pages on OTN does make the job easier. The Software Delivery Cloud provides you with a flat list of the Oracle Fusion Middleware 11g media pack. You have to know what you are looking for and pick out the right pieces :-( The OTN product download pages present not only the download for the product you want but also its dependencies such as WebLogic Server and Repository Creation Utility. So, even if your licensing requirements drive you towards the cloud, it is still worthwhile checking the OTN pages if only as a guide to what you need to pick out from the flat list found on the cloud site. Latest Patch Set This is an area which may cause you confusion - especially if you are more familiar with the Oracle Application Server 10g patching story. From Patch Set 11.1.1.6 and higher, the majority of FMW 11g products (N.B there are exceptions) provide installers which can be used both to update existing FMW 11g product installs or build brand new ones. This is good news because, unless you are dealing with one of the exceptions, it means you do not have to download base software and a patch set. At the time of the writing, the two significant exceptions are: Portal/Forms/Reports/Discoverer 11g Release 1 (11.1.1.x) Identity Access Management 11g Release 1 (11.1.1.x) The other key message here is ensure you are grabbing a version of Oracle WebLogic Server which is compatible with your chosen product patch set version. Get this wrong and you will hit errors / problems at AS Instance Configuration Time.The go to place is this document - Oracle Fusion Middleware Download, Installation, and Configuration Readme FilesIn fact, this README document pretty much takes you through what I have blogged above. The only thing is you need to know which README to choose, and that's why planning your FMW 11g technology stack and viewing certification information comes into play beforehand. And Finally As the Oracle Fusion Middleware Download, Installation, and Configuration Readme Files states don't forget to check FMW 11g System Requirements FMW 11g Product Interoperability

  Read the article

• RequestValidation Changes in ASP.NET 4.0

  - by Rick Strahl

  There’s been a change in the way the ValidateRequest attribute on WebForms works in ASP.NET 4.0. I noticed this today while updating a post on my WebLog all of which contain raw HTML and so all pretty much trigger request validation. I recently upgraded this app from ASP.NET 2.0 to 4.0 and it’s now failing to update posts. At first this was difficult to track down because of custom error handling in my app – the custom error handler traps the exception and logs it with only basic error information so the full detail of the error was initially hidden. After some more experimentation in development mode the error that occurs is the typical ASP.NET validate request error (‘A potentially dangerous Request.Form value was detetected…’) which looks like this in ASP.NET 4.0: At first when I got this I was real perplexed as I didn’t read the entire error message and because my page does have: <%@ Page Language="C#" AutoEventWireup="true" CodeBehind="NewEntry.aspx.cs" Inherits="Westwind.WebLog.NewEntry" MasterPageFile="~/App_Templates/Standard/AdminMaster.master" ValidateRequest="false" EnableEventValidation="false" EnableViewState="false" %> WTF? ValidateRequest would seem like it should be enough, but alas in ASP.NET 4.0 apparently that setting alone is no longer enough. Reading the fine print in the error explains that you need to explicitly set the requestValidationMode for the application back to V2.0 in web.config: <httpRuntime executionTimeout="300" requestValidationMode="2.0" /> Kudos for the ASP.NET team for putting up a nice error message that tells me how to fix this problem, but excuse me why the heck would you change this behavior to require an explicit override to an optional and by default disabled page level switch? You’ve just made a relatively simple fix to a solution a nasty morass of hard to discover configuration settings??? The original way this worked was perfectly discoverable via attributes in the page. Now you can set this setting in the page and get completely unexpected behavior and you are required to set what effectively amounts to a backwards compatibility flag in the configuration file. It turns out the real reason for the .config flag is that the request validation behavior has moved from WebForms pipeline down into the entire ASP.NET/IIS request pipeline and is now applied against all requests. Here’s what the breaking changes page from Microsoft says about it: The request validation feature in ASP.NET provides a certain level of default protection against cross-site scripting (XSS) attacks. In previous versions of ASP.NET, request validation was enabled by default. However, it applied only to ASP.NET pages (.aspx files and their class files) and only when those pages were executing. In ASP.NET 4, by default, request validation is enabled for all requests, because it is enabled before the BeginRequest phase of an HTTP request. As a result, request validation applies to requests for all ASP.NET resources, not just .aspx page requests. This includes requests such as Web service calls and custom HTTP handlers. Request validation is also active when custom HTTP modules are reading the contents of an HTTP request. As a result, request validation errors might now occur for requests that previously did not trigger errors. To revert to the behavior of the ASP.NET 2.0 request validation feature, add the following setting in the Web.config file: <httpRuntime requestValidationMode="2.0" /> However, we recommend that you analyze any request validation errors to determine whether existing handlers, modules, or other custom code accesses potentially unsafe HTTP inputs that could be XSS attack vectors. Ok, so ValidateRequest of the form still works as it always has but it’s actually the ASP.NET Event Pipeline, not WebForms that’s throwing the above exception as request validation is applied to every request that hits the pipeline. Creating the runtime override removes the HttpRuntime checking and restores the WebForms only behavior. That fixes my immediate problem but still leaves me wondering especially given the vague wording of the above explanation. One thing that’s missing in the description is above is one important detail: The request validation is applied only to application/x-www-form-urlencoded POST content not to all inbound POST data. When I first read this this freaked me out because it sounds like literally ANY request hitting the pipeline is affected. To make sure this is not really so I created a quick handler: public class Handler1 : IHttpHandler { public void ProcessRequest(HttpContext context) { context.Response.ContentType = "text/plain"; context.Response.Write("Hello World <hr>" + context.Request.Form.ToString()); } public bool IsReusable { get { return false; } } } and called it with Fiddler by posting some XML to the handler using a default form-urlencoded POST content type: and sure enough – hitting the handler also causes the request validation error and 500 server response. Changing the content type to text/xml effectively fixes the problem however, bypassing the request validation filter so Web Services/AJAX handlers and custom modules/handlers that implement custom protocols aren’t affected as long as they work with special input content types. It also looks that multipart encoding does not trigger event validation of the runtime either so this request also works fine: POST http://rasnote/weblog/handler1.ashx HTTP/1.1 Content-Type: multipart/form-data; boundary=------7cf2a327f01ae User-Agent: West Wind Internet Protocols 5.53 Host: rasnote Content-Length: 40 Pragma: no-cache <xml>asdasd</xml>--------7cf2a327f01ae *That* probably should trigger event validation – since it is a potential HTML form submission, but it doesn’t. New Runtime Feature, Global Scope Only? Ok, so request validation is now a runtime feature but sadly it’s a feature that’s scoped to the ASP.NET Runtime – effective scope to the entire running application/app domain. You can still manually force validation using Request.ValidateInput() which gives you the option to do this in code, but that realistically will only work with the requestValidationMode set to V2.0 as well since the 4.0 mode auto-fires before code ever gets a chance to intercept the call. Given all that, the new setting in ASP.NET 4.0 seems to limit options and makes things more difficult and less flexible. Of course Microsoft gets to say ASP.NET is more secure by default because of it but what good is that if you have to turn off this flag the very first time you need to allow one single request that bypasses request validation??? This is really shortsighted design… <sigh>© Rick Strahl, West Wind Technologies, 2005-2010Posted in ASP.NET  

  Read the article

• Sending HTML to Gmail always lands in Spam

  - by cartaysm

  I am having an issue with sending HTML emails to Gmail. I can send them to Yahoo, Hotmail, RR, AOL, etc. with no problem at all, but when I send them to Gmail I get kicked to spam. I have checked my IP with a lot of different list to make sure it is not listed anywhere, which it is not. spamhaus = is not listed in the DBL abuse.net = is not listed in the SBL abuse.net = is not listed in the PBL abuse.net = is not listed in the XBL spamcop = not listed in bl.spamcop.net host 24.172.204.xxx xxx.204.172.24.in-addr.arpa domain name pointer xxxevents.com. host xxxevents.com xxxevents.com has address 24.172.204.xxx xxxevents.com mail is handled by 10 mail.xxxevents.com. I am just trying to send a very VERY basic HTML message (listed below). I use an Ubuntu server, swiftmailer, multipart/alternative (HTML & plain), SPF = pass, and I am going to setup DKIM today to see if that fixes it (but I doubt it will)... For now I will only post the message I sent that gets kicked to spam and can provide any details needed. <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head><title>Triathlon</title></head> <body> <table cellpadding="0" cellspacing="0"> <tr> <td> <p>Thank you for attending our 4th annual Triathlon/Duathlon/5k at Hueston Woods State Park on August 12th. This event is held annually to raise research funding for Crohn's Disease, Ulcerative Colitis, and Muscular Dystrophy diseases.</p> </td> </tr> <tr> <td> <p>As you know the results and pictures have been posted on our home page at since Sunday 8/13/2012. Now we also have updated our Facebook page with those photos and you can start tagging yourself or downloading the pictures now! <br /> our page and tag yourself at </p> <p> test test </p> <p>Race day events is professionally managed by Speedy-Feet</p> </td> </tr> </table> </body> </html> Just plain text works great, I thought maybe wording was messing me up but not the case... I am almost done install opendkim so I will be able to rule that out very soon. Edit: Okay installed opendkim and I am getting passing results so I sent the html I posted above it went through just fine. So now when I start to add a few more lines I am getting kicked back to spam again. Here is updated html code: ` <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head><title>Triathlon</title></head> <body> <table cellpadding="0" cellspacing="0"> <tr> <td> <center><a href='http://xxxevents.com' target="_blank"> <font face="Verdana, Arial, Helvetica, sans-serif" color="#666666" size="2"> <img src="http://xxxevents.com/marketemailimages/xxxlogo.png" alt="xxx It Events | Raising funds for Crohns, Colitis, and Muscular Dystrophy" border="0" /> </font></a></center> </td> <tr> <td> <p>Thank you for attending our 4th annual Triathlon/Duathlon/5k at Hueston Woods State Park on August 12th. This event is held annually to raise research funding for Crohn's Disease, Ulcerative Colitis, and Muscular Dystrophy diseases.</p> </td> </tr> <tr> <td> <p>As you know the results and pictures have been posted on our home page at since Sunday 8/13/2012. Now we also have updated our Facebook page with those photos and you can start tagging yourself or downloading the pictures now! <br /> our page and tag yourself at </p> <p> test test </p> <p>Race day events is professionally managed by Speedy-Feet</p> </td> </tr> </table> <table width="100%" border="0" cellspacing="0" cellpadding="0"> <tr> <td valign="top"> <div align="center" style="font-family:Verdana, Arial, Helvetica, sans-serif; font-size:10px;"><br />PO Box xxx Maineville, OH 45039<br /> <a href="mailto:[email protected]">[email protected]</a> | <a href='http://xxxevents.com' target="_blank">xxxevents.com</a><br /> <br /> </div> </td> </tr> </table> </body> </html>`

  Read the article

• A Bite With No Teeth&ndash;Demystifying Non-Compete Clauses

  - by D'Arcy Lussier

  *DISCLAIMER: I am not a lawyer and this post in no way should be considered legal advice. I’m also in Canada, so references made are to Canadian court cases. I received a signed letter the other day, a reminder from my previous employer about some clauses associated with my employment and entry into an employee stock purchase program. So since this is in effect for the next 12 months, I guess I’m not starting that new job tomorrow. I’m kidding of course. How outrageous, how presumptuous, pompous, and arrogant that a company – any company – would actually place these conditions upon an employee. And yet, this is not uncommon. Especially in the IT industry, we see time and again similar wording in our employment agreements. But…are these legal? Is there any teeth behind the threat of the bite? Luckily, the answer seems to be ‘No’. I want to highlight two cases that support this. The first is Lyons v. Multari. In a nutshell, Dentist hires younger Dentist to be an associate. In their short, handwritten agreement, a non-compete clause was written stating “Protective Covenant. 3 yrs. – 5mi” (meaning you can’t set up shop within 5 miles for 3 years). Well, the young dentist left and did start an oral surgery office within 5 miles and within 3 years. Off to court they go! The initial judge sided with the older dentist, but on appeal it was overturned. Feel free to read the transcript of the decision here, but let me highlight one portion from section [19]: The general rule in most common law jurisdictions is that non-competition clauses in employment contracts are void. The sections following [19] explain further, and discuss Elsley v. J.G. Collins Insurance Agency Ltd. and its impact on Canadian law in this regard. The second case is Winnipeg Livestock Sales Ltd. v. Plewman. Desmond Plewman is an auctioneer, and worked at Winnipeg Livestock Sales. Part of his employment agreement was that he could not work for a competitor for 18 months if he left the company. Well, he left, and took up an important role in a competing company. The case went to court and as with Lyons v. Multari, the initial judge found in favour of the plaintiffs. Also as in the first case, that was overturned on appeal. Again, read through the transcript of the decision, but consider section [28]: In other words, even though Plewman has a great deal of skill as an auctioneer, Winnipeg Livestock has no proprietary interest in his professional skill and experience, even if they were acquired during his time working for Winnipeg Livestock.  Thus, Winnipeg Livestock has the burden of establishing that it has a legitimate proprietary interest requiring protection.  On this key question there is little evidence before the Court.  The record discloses that part of Plewman’s job was to “mingle with the … crowd” and to telephone customers and prospective customers about future prospects for the sale of livestock.  It may seem reasonable to assume that Winnipeg Livestock has a legitimate proprietary interest in its customer connections; but there is no evidence to indicate that there is any significant degree of “customer loyalty” in the business, as opposed to customers making choices based on other considerations such as cost, availability and the like. So are there any incidents where a non-compete can actually be valid? Yes, and these are considered “exceptional” cases, meaning that the situation meets certain circumstances. Michael Carabash has a great blog series discussing the above mentioned cases as well as the difference between a non-compete and non-solicit agreement. He talks about the exceptional criteria: In summary, the authorities reveal that the following circumstances will generally be relevant in determining whether a case is an “exceptional” one so that a general non-competition clause will be found to be reasonable: - The length of service with the employer. - The amount of personal service to clients. - Whether the employee dealt with clients exclusively, or on a sustained or     recurring basis. - Whether the knowledge about the client which the employee gained was of a   confidential nature, or involved an intimate knowledge of the client’s   particular needs, preferences or idiosyncrasies. - Whether the nature of the employee’s work meant that the employee had   influence over clients in the sense that the clients relied upon the employee’s   advice, or trusted the employee. - If competition by the employee has already occurred, whether there is   evidence that clients have switched their custom to him, especially without   direct solicitation. - The nature of the business with respect to whether personal knowledge of   the clients’ confidential matters is required. - The nature of the business with respect to the strength of customer loyalty,   how clients are “won” and kept, and whether the clientele is a recurring one. - The community involved and whether there were clientele yet to be exploited   by anyone. I close this blog post with a final quote, one from Zvulony & Co’s blog post on this subject. Again, all of this is not official legal advice, but I think we can see what all these sources are pointing towards. To answer my earlier question, there’s no teeth behind the threat of the bite. In light of this list, and the decisions in Lyons and Orlan, it is reasonably certain that in most employment situations a non-competition clause will be ineffective in protecting an employer from a departing employee who wishes to compete in the same business. The Courts have been relatively consistent in their position that if a non-solicitation clause can protect an employer’s interests, then a non-competition clause is probably unreasonable. Employers (or their solicitors) should avoid the inclination to draft restrictive covenants in broad, catch-all language. Or in other words, when drafting a restrictive covenant – take only what you need! D

  Read the article

• Different Not Automatically Implies Better

  - by Alois Kraus

  Originally posted on: http://geekswithblogs.net/akraus1/archive/2013/11/05/154556.aspxRecently I was digging deeper why some WCF hosted workflow application did consume quite a lot of memory although it did basically only load a xaml workflow. The first tool of choice is Process Explorer or even better Process Hacker (has more options and the best feature copy&paste does work). The three most important numbers of a process with regards to memory are Working Set, Private Working Set and Private Bytes. Working set is the currently consumed physical memory (parts can be shared between processes e.g. loaded dlls which are read only) Private Working Set is the physical memory needed by this process which is not shareable Private Bytes is the number of non shareable which is only visible in the current process (e.g. all new, malloc, VirtualAlloc calls do create private bytes) When you have a bigger workflow it can consume under 64 bit easily 500MB for a 1-2 MB xaml file. This does not look very scalable. Under 64 bit the issue is excessive private bytes consumption and not the managed heap. The picture is quite different for 32 bit which looks a bit strange but it seems that the hosted VB compiler is a lot less memory hungry under 32 bit. I did try to repro the issue with a medium sized xaml file (400KB) which does contain 1000 variables and 1000 if which can be represented by C# code like this: string Var1; string Var2; ... string Var1000; if (!String.IsNullOrEmpty(Var1) ) { Console.WriteLine(“Var1”); } if (!String.IsNullOrEmpty(Var2) ) { Console.WriteLine(“Var2”); } ....   Since WF is based on VB.NET expressions you are bound to the hosted VB.NET compiler which does result in (x64) 140 MB of private bytes which is ca. 140 KB for each if clause which is quite a lot if you think about the actually present functionality. But there is hope. .NET 4.5 does allow now C# expressions for WF which is a major step forward for all C# lovers. I did create some simple patcher to “cross compile” my xaml to C# expressions. Lets look at the result: C# Expressions VB Expressions x86 x86 On my home machine I have only 32 bit which gives you quite exactly half of the memory consumption under 64 bit. C# expressions are 10 times more memory hungry than VB.NET expressions! I wanted to do more with less memory but instead it did consume a magnitude more memory. That is surprising to say the least. The workflow does initialize in about the same time under x64 and x86 where the VB code does it in 2s whereas the C# version needs 18s. Also nearly ten times slower. That is a too high price to pay for any bigger sized xaml workflow to convert from VB.NET to C# expressions. If I do reduce the number of expressions to 500 then it does need 400MB which is about half of the memory. It seems that the cost per if does rise linear with the number of total expressions in a xaml workflow.  Expression Language Cost per IF Startup Time C# 1000 Ifs x64 1,5 MB 18s C# 500 Ifs x64 750 KB 9s VB 1000 Ifs x64 140 KB 2s VB 500 Ifs x64 70 KB 1s Now we can directly compare two MS implementations. It is clear that the VB.NET compiler uses the same underlying structure but it has much higher offset compared to the highly inefficient C# expression compiler. I have filed a connect bug here with a harsher wording about recent advances in memory consumption. The funniest thing is that one MS employee did give an Azure AppFabric demo around early 2011 which was so slow that he needed to investigate with xperf. He was after startup time and the call stacks with regards to VB.NET expression compilation were remarkably similar. In fact I only found this post by googling for parts of my call stacks. … “C# expressions will be coming soon to WF, and that will have different performance characteristics than VB” … What did he know Jan 2011 what I did no know until today? ;-). He knew that C# expression will come but that they will not be automatically have better footprint. It is about time to fix that. In its current state C# expressions are not usable for bigger workflows. That also explains the headline for today. You can cheat startup time by prestarting workflows so that the demo looks nice and snappy but it does hurt scalability a lot since you do need much more memory than necessary. I did find the stacks by enabling virtual allocation tracking within XPerf which is still the best tool out there. But first you need to look at your process to check where the memory is hiding: For the C# Expression compiler you do not need xperf. You can directly dump the managed heap and check with a profiler of your choice. But if the allocations are happening on the Private Data ( VirtualAlloc ) you can find it with xperf. There is a nice video on channel 9 explaining VirtualAlloc tracking it in greater detail. If your data allocations are on the Heap it does mean that the C/C++ runtime did create a heap for you where all malloc, new calls do allocate from it. You can enable heap tracing with xperf and full call stack support as well which is doable via xperf like it is shown also on channel 9. Or you can use WPRUI directly: To make “Heap Usage” it work you need to set for your executable the tracing flags (before you start it). For example devenv.exe HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\devenv.exe DWORD TracingFlags 1 Do not forget to disable it after you did complete profiling the process or it will impact the startup time quite a lot. You can with xperf attach directly to a running process and collect heap allocation information from a gone wild process. Very handy if you need to find out what a process was doing which has arrived in a funny state. “VirtualAlloc usage” does work without explicitly enabling stuff for a specific process and is always on machine wide. I had issues on my Windows 7 machines with the call stack collection and the latest Windows 8.1 Performance Toolkit. I was told that WPA from Windows 8.0 should work fine but I do not want to downgrade.

  Read the article

< Previous Page | 1 2 3 4 5 6  | Next Page >