Search Results

Search found 150 results on 6 pages for 'x509'.

Page 5/6 | < Previous Page | 1 2 3 4 5 6  | Next Page >

  • Configuring a WCF Client to Use UserName Credentials On the Request and Check Certificate Credential

    - by AlEl
    I'm trying to use WCF to consume a web service provided by a third-party's Oracle Application Server. I pass a username and password in a UsernameToken as part of the request and as part of the response the web service returns a standard security tag in the header which includes a digest and signature. With my current setup, I successfully send a request to the server and the web service sends the expected response data back. However, when parsing the response WCF throws a MessageSecurityException, with an InnerException.Message of "Supporting token signatures not expected." My guess is that WCF wants me to configure it to handle the signature and verify it. I have a certificate from the third party that hosts the web service that I should be able to use to verify the signature, although I'm not sure if I'll need it. Here's a sample header from a response that makes WCF throw the exception: <?xml version="1.0" encoding="UTF-8"?> <soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/"> <soap:Header> <wsse:Security soap:mustUnderstand="1" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" xmlns="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd"> <dsig:Signature xmlns="http://www.w3.org/2000/09/xmldsig#" xmlns:dsig="http://www.w3.org/2000/09/xmldsig#"> <dsig:SignedInfo> <dsig:CanonicalizationMethod Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#"/> <dsig:SignatureMethod Algorithm="http://www.w3.org/2000/09/xmldsig#rsa-sha1"/> <dsig:Reference URI="#_51IUwNWRVvPOcz12pZHLNQ22"> <dsig:Transforms> <dsig:Transform Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#"/> </dsig:Transforms> <dsig:DigestMethod Algorithm="http://www.w3.org/2000/09/xmldsig#sha1"/> <dsig:DigestValue> [DigestValue here] </dsig:DigestValue> </dsig:Reference> <dsig:Reference URI="#_dI5j0EqxrVsj0e62J6vd6w22"> <dsig:Transforms> <dsig:Transform Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#"/> </dsig:Transforms> <dsig:DigestMethod Algorithm="http://www.w3.org/2000/09/xmldsig#sha1"/> <dsig:DigestValue> [DigestValue here] </dsig:DigestValue> </dsig:Reference> </dsig:SignedInfo> <dsig:SignatureValue> [Signature Value Here] </dsig:SignatureValue> <dsig:KeyInfo> <wsse:SecurityTokenReference xmlns="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd"> <wsse:Reference URI="#BST-9nKWbrE4LRv6maqstrGuUQ22" ValueType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#X509v3"/> </wsse:SecurityTokenReference> </dsig:KeyInfo> </dsig:Signature> <wsse:BinarySecurityToken ValueType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#X509v3" EncodingType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0#Base64Binary" wsu:Id="BST-9nKWbrE4LRv6maqstrGuUQ22" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd"> [Security Token Here] </wsse:BinarySecurityToken> <wsu:Timestamp wsu:Id="_dI5j0EqxrVsj0e62J6vd6w22" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" xmlns="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd"> <wsu:Created>2010-05-26T18:46:30Z</wsu:Created> </wsu:Timestamp> </wsse:Security> </soap:Header> <soap:Body wsu:Id="_51IUwNWRVvPOcz12pZHLNQ22" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd"> [Body content here] </soap:Body> </soap:Envelope> My binding configuration looks like: <basicHttpBinding> <binding name="myBinding" closeTimeout="00:01:00" openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:01:00" allowCookies="false" bypassProxyOnLocal="false" hostNameComparisonMode="StrongWildcard" maxBufferSize="65536" maxBufferPoolSize="524288" maxReceivedMessageSize="65536" messageEncoding="Text" textEncoding="utf-8" transferMode="Buffered" useDefaultWebProxy="true"> <readerQuotas maxDepth="32" maxStringContentLength="8192" maxArrayLength="16384" maxBytesPerRead="4096" maxNameTableCharCount="16384" /> <security mode="TransportWithMessageCredential"> <transport clientCredentialType="None" proxyCredentialType="None" realm="" /> <message clientCredentialType="UserName" algorithmSuite="Default" /> </security> </binding> </basicHttpBinding> I think that basically what I have to do is configure WCF to use UserName client credentials in the request and Certificate client credentials in the response. I don't know how to do this though. I'm new at WCF, so I'm sorry if this is a bit of a dumb question. I've been trying to Google solutions, but there seem to be so many different ways to configure WCF that I'm getting overwhelmed. Thanks in advance!

    Read the article

  • How to digitally sign a message with M2Crypto using the keys within a DER format certificate

    - by Pablo Santos
    Hi everyone. I am working on a project to implement digital signatures of outgoing messages and decided to use M2Crypto for that. I have a certificate (in DER format) from which I extract the keys to sign the message. For some reason I keep getting an ugly segmentation fault error when I call the "sign_update" method. Given the previous examples I have read here, I am clearly missing something. Here is the example I am working on: from M2Crypto.X509 import * cert = load_cert( 'certificate.cer', format=0 ) Pub_key = cert.get_pubkey() Pub_key.reset_context(md='sha1') Pub_key.sign_init() Pub_key.sign_update( "This should be good." ) print Pub_key.sign_final() Thanks in advance for the help, Pablo

    Read the article

  • XML Signature in a Web application

    - by OpenDevSoft
    Hi, We are developing an e-Banking web application for a small bank (up to 20000 clients/users). We have to implement digital signatures with X509 certificates (issued by CA on USB tokens) for signing payment information. We tried using CAPICOM but it seems that it is not working well with Windows Vista (have not tried it with Win 7). The other problem is that core banking system can process only Xml digital signatures, so we have to sign XML documents (not just a bulk-formatted text data like with CAPICOM and Win32 Crypto API). So my questions here are: Does anyone of you have similar problem and how did they solved it? Is there a plug-in, library, component or external tool (for Internet Explorer and/or Fire Fox) that supports XML Digital Signatures in a web application? Can you please recommend some of these products and write something about your experience with them? Thank you very much.

    Read the article

  • Allowing connections initiated from outside

    - by Mark S. Rasmussen
    I've got an old Juniper SSG5 running ScreenOS 5.4.0r6.0. Once a day, more or less, it'll start randomly dropping packets at a rate of ~5-10%. We currently solve this issue by simply rebooting the unit, after which it resumes working in perfect condition. As this error has started appearing randomly, without any configuration or hardware changes, I'm assuming I've got an aging unit about to fail. As such, I've got a replacement SSG5 running ScreenOS 6.0. I've dumped the config on the 5.4 and imported it into a clean 6.0, and it seems to gladly accept it, and all my configuration seems to be A-OK. However, upon connecting the new unit, all outside-initiated connections seem to be blocked. If I browse our external IP from the inside, everything works perfectly, and it's not just port 80, SSH, Crashplan - all of our policies route correctly. All normal networking, initiated from the inside, work perfectly as well. If on the other hand I browse our external IP from the outside, everything is blocked. Barring differences between ScreenOS 5.4 and 6.0, the config is identical. Is there a setting somewhere that defines whether outside/inside initiated connections are allowed? unset key protection enable set clock timezone 1 set vrouter trust-vr sharable set vrouter "untrust-vr" exit set vrouter "trust-vr" unset auto-route-export exit set service "MyVOIP_UDP4569" protocol udp src-port 0-65535 dst-port 4569-4569 set service "MyVOIP_TCP22" protocol tcp src-port 0-65535 dst-port 22-22 set service "MyRDP" protocol tcp src-port 0-65535 dst-port 3389-3389 set service "MyRsync" protocol tcp src-port 0-65535 dst-port 873-873 set service "NZ_FTP" protocol tcp src-port 0-65535 dst-port 40000-41000 set service "NZ_FTP" + tcp src-port 0-65535 dst-port 21-21 set service "PPTP-VPN" protocol 47 src-port 2048-2048 dst-port 2048-2048 set service "PPTP-VPN" + tcp src-port 1024-65535 dst-port 1723-1723 set service "NZ_FMS_1935" protocol tcp src-port 0-65535 dst-port 1935-1935 set service "NZ_FMS_1935" + udp src-port 0-65535 dst-port 1935-1935 set service "NZ_FMS_8080" protocol tcp src-port 0-65535 dst-port 8080-8080 set service "CrashPlan Server" protocol tcp src-port 0-65535 dst-port 4280-4280 set service "CrashPlan Console" protocol tcp src-port 0-65535 dst-port 4282-4282 unset alg sip enable set alg appleichat enable unset alg appleichat re-assembly enable set alg sctp enable set auth-server "Local" id 0 set auth-server "Local" server-name "Local" set auth default auth server "Local" set auth radius accounting port 1646 set admin name "netscreen" set admin password "XXX" set admin auth web timeout 10 set admin auth dial-in timeout 3 set admin auth server "Local" set admin format dos set vip multi-port set zone "Trust" vrouter "trust-vr" set zone "Untrust" vrouter "trust-vr" set zone "DMZ" vrouter "trust-vr" set zone "VLAN" vrouter "trust-vr" set zone "Untrust-Tun" vrouter "trust-vr" set zone "Trust" tcp-rst set zone "Untrust" block unset zone "Untrust" tcp-rst set zone "MGT" block unset zone "V1-Trust" tcp-rst unset zone "V1-Untrust" tcp-rst set zone "DMZ" tcp-rst unset zone "V1-DMZ" tcp-rst unset zone "VLAN" tcp-rst set zone "Untrust" screen tear-drop set zone "Untrust" screen syn-flood set zone "Untrust" screen ping-death set zone "Untrust" screen ip-filter-src set zone "Untrust" screen land set zone "V1-Untrust" screen tear-drop set zone "V1-Untrust" screen syn-flood set zone "V1-Untrust" screen ping-death set zone "V1-Untrust" screen ip-filter-src set zone "V1-Untrust" screen land set interface ethernet0/0 phy full 100mb set interface ethernet0/3 phy full 100mb set interface ethernet0/4 phy full 100mb set interface ethernet0/5 phy full 100mb set interface ethernet0/6 phy full 100mb set interface "ethernet0/0" zone "Untrust" set interface "ethernet0/1" zone "Null" set interface "bgroup0" zone "Trust" set interface "bgroup1" zone "Trust" set interface "bgroup2" zone "Trust" set interface bgroup2 port ethernet0/2 set interface bgroup0 port ethernet0/3 set interface bgroup0 port ethernet0/4 set interface bgroup1 port ethernet0/5 set interface bgroup1 port ethernet0/6 unset interface vlan1 ip set interface ethernet0/0 ip 215.173.182.18/29 set interface ethernet0/0 route set interface bgroup0 ip 192.168.1.1/24 set interface bgroup0 nat set interface bgroup1 ip 192.168.2.1/24 set interface bgroup1 nat set interface bgroup2 ip 192.168.3.1/24 set interface bgroup2 nat set interface ethernet0/0 gateway 215.173.182.17 unset interface vlan1 bypass-others-ipsec unset interface vlan1 bypass-non-ip set interface ethernet0/0 ip manageable set interface bgroup0 ip manageable set interface bgroup1 ip manageable set interface bgroup2 ip manageable set interface bgroup0 manage mtrace unset interface bgroup1 manage ssh unset interface bgroup1 manage telnet unset interface bgroup1 manage snmp unset interface bgroup1 manage ssl unset interface bgroup1 manage web unset interface bgroup2 manage ssh unset interface bgroup2 manage telnet unset interface bgroup2 manage snmp unset interface bgroup2 manage ssl unset interface bgroup2 manage web set interface ethernet0/0 vip 215.173.182.19 2048 "PPTP-VPN" 192.168.1.131 set interface ethernet0/0 vip 215.173.182.19 + 4280 "CrashPlan Server" 192.168.1.131 set interface ethernet0/0 vip 215.173.182.19 + 4282 "CrashPlan Console" 192.168.1.131 set interface ethernet0/0 vip 215.173.182.22 22 "MyVOIP_TCP22" 192.168.2.127 set interface ethernet0/0 vip 215.173.182.22 + 4569 "MyVOIP_UDP4569" 192.168.2.127 set interface ethernet0/0 vip 215.173.182.22 + 3389 "MyRDP" 192.168.2.202 set interface ethernet0/0 vip 215.173.182.22 + 873 "MyRsync" 192.168.2.201 set interface ethernet0/0 vip 215.173.182.22 + 80 "HTTP" 192.168.2.202 set interface ethernet0/0 vip 215.173.182.22 + 2048 "PPTP-VPN" 192.168.2.201 set interface ethernet0/0 vip 215.173.182.22 + 8080 "NZ_FMS_8080" 192.168.2.216 set interface ethernet0/0 vip 215.173.182.22 + 1935 "NZ_FMS_1935" 192.168.2.216 set interface bgroup0 dhcp server service set interface bgroup1 dhcp server service set interface bgroup2 dhcp server service set interface bgroup0 dhcp server auto set interface bgroup1 dhcp server auto set interface bgroup2 dhcp server auto set interface bgroup0 dhcp server option domainname companyalan set interface bgroup0 dhcp server option dns1 192.168.1.131 set interface bgroup1 dhcp server option domainname companyblan set interface bgroup1 dhcp server option dns1 192.168.2.202 set interface bgroup2 dhcp server option dns1 8.8.8.8 set interface bgroup2 dhcp server option wins1 8.8.4.4 set interface bgroup0 dhcp server ip 192.168.1.2 to 192.168.1.116 set interface bgroup1 dhcp server ip 192.168.2.2 to 192.168.2.116 set interface bgroup2 dhcp server ip 192.168.3.2 to 192.168.3.126 unset interface bgroup0 dhcp server config next-server-ip unset interface bgroup1 dhcp server config next-server-ip unset interface bgroup2 dhcp server config next-server-ip set interface "ethernet0/0" mip 215.173.182.21 host 192.168.2.202 netmask 255.255.255.255 vr "trust-vr" set interface "serial0/0" modem settings "USR" init "AT&F" set interface "serial0/0" modem settings "USR" active set interface "serial0/0" modem speed 115200 set interface "serial0/0" modem retry 3 set interface "serial0/0" modem interval 10 set interface "serial0/0" modem idle-time 10 set flow tcp-mss unset flow tcp-syn-check unset flow tcp-syn-bit-check set flow reverse-route clear-text prefer set flow reverse-route tunnel always set pki authority default scep mode "auto" set pki x509 default cert-path partial set pki x509 dn name "[email protected]" set dns host dns1 0.0.0.0 set dns host dns2 0.0.0.0 set dns host dns3 0.0.0.0 set address "Trust" "192.168.1.0/24" 192.168.1.0 255.255.255.0 set address "Trust" "192.168.2.0/24" 192.168.2.0 255.255.255.0 set address "Trust" "192.168.3.0/24" 192.168.3.0 255.255.255.0 set crypto-policy exit set ike respond-bad-spi 1 set ike ikev2 ike-sa-soft-lifetime 60 unset ike ikeid-enumeration unset ike dos-protection unset ipsec access-session enable set ipsec access-session maximum 5000 set ipsec access-session upper-threshold 0 set ipsec access-session lower-threshold 0 set ipsec access-session dead-p2-sa-timeout 0 unset ipsec access-session log-error unset ipsec access-session info-exch-connected unset ipsec access-session use-error-log set vrouter "untrust-vr" exit set vrouter "trust-vr" exit set l2tp default ppp-auth chap set url protocol websense exit set policy id 1 from "Trust" to "Untrust" "Any" "Any" "ANY" permit set policy id 1 exit set policy id 2 from "Untrust" to "Trust" "Any" "VIP(215.173.182.19)" "PPTP-VPN" permit traffic set policy id 2 exit set policy id 3 from "Untrust" to "Trust" "Any" "VIP(215.173.182.22)" "HTTP" permit log set policy id 3 set service "MyRDP" set service "MyRsync" set service "MyVOIP_TCP22" set service "MyVOIP_UDP4569" exit set policy id 6 from "Trust" to "Trust" "192.168.1.0/24" "192.168.2.0/24" "ANY" deny set policy id 6 exit set policy id 7 from "Trust" to "Trust" "192.168.2.0/24" "192.168.1.0/24" "ANY" deny set policy id 7 exit set policy id 8 from "Trust" to "Trust" "192.168.3.0/24" "192.168.1.0/24" "ANY" deny set policy id 8 exit set policy id 9 from "Trust" to "Trust" "192.168.3.0/24" "192.168.2.0/24" "ANY" deny set policy id 9 exit set policy id 10 from "Untrust" to "Trust" "Any" "MIP(215.173.182.21)" "NZ_FTP" permit set policy id 10 exit set policy id 11 from "Untrust" to "Trust" "Any" "VIP(215.173.182.22)" "PPTP-VPN" permit set policy id 11 exit set policy id 12 from "Untrust" to "Trust" "Any" "VIP(215.173.182.22)" "NZ_FMS_1935" permit set policy id 12 set service "NZ_FMS_8080" exit set policy id 13 from "Untrust" to "Trust" "Any" "VIP(215.173.182.19)" "CrashPlan Console" permit set policy id 13 set service "CrashPlan Server" exit set nsmgmt bulkcli reboot-timeout 60 set ssh version v2 set config lock timeout 5 unset license-key auto-update set telnet client enable set snmp port listen 161 set snmp port trap 162 set vrouter "untrust-vr" exit set vrouter "trust-vr" unset add-default-route exit set vrouter "untrust-vr" exit set vrouter "trust-vr" exit Note that I've previously posted a similar question (pertaining to the same device & replacement, but ultimately caused by a malfunctioning switch, and thus clouding the current issue): Outbound traffic being blocked for MIP/VIPped servers (Juniper SSG5)

    Read the article

  • how to pass an arbitrary signature to Certifcate

    - by eskoba
    I am trying to sign certificate (X509) using secret sharing. that is shareholders combine their signatures to produce the final signature. which will be in this case the signed certificate. however practically from my understanding only one entity can sign a certificate. therefore I want to know: which entities or data of the x509certificate are actually taken as input to the signing algorithm? ideally I want this data to be signed by the shareholders and then the final combination will be passed to the X509certificate as valid signature. is this possible? how could it done? if not are they other alternatives?

    Read the article

  • How to generate, sign and import SSL certificate from Java

    - by Demiurg
    I need to generate a self signed certificates at run time, sign them and import to the Java keystore. I can do this using "keytool" and "openssl" from command line in the following way: keytool -import -alias root -keystore keystore.txt -file cacert.pem keytool -genkey -keyalg RSA -keysize 1024 -alias www.cia.gov -keystore keystore.txt keytool -keystore keystore.txt -certreq -alias www.cia.gov -file req.pem openssl x509 -req -days 3650 -in req.pem -CA cacert.pem -CAkey cakey.pem -CAcreateserial -out reqsigned.pem keytool -import -alias www.cia.gov -keystore keystore.txt -trustcacerts -file reqsigned.pem I can, of course, ship my application with keytool and openssl binaries and execute the above commands from Java, but I'm looking for a cleaner approach which would allow me to do all of the above using pure Java. Any libraries I can use ?

    Read the article

  • Canonicalizing XML in Ruby

    - by whazzmaster
    I'm working on a SAML gateway using Ruby/Rails and I'm attempting to write some code that validates the xml digital signature of the incoming SAML response against the x509 cert of the originating service. My problem: the signature depends on a canonicalized version of the XML that is hashed and then signed and I'm having trouble finding a ruby lib/gem that will canonicalize XML per the spec. I found a super old gem on rubyforge that is a mess but I'd be more interested if something like nokogiri supported this kind of functionality (from the nokogiri docs, it doesn't). I've googled extensively but thought I'd ask around here to see if anyone has any good insights before I go and try to write my own version or rework the existing c14n-r library.

    Read the article

  • Question about creating digital signature using OpenSSL?(pkcs7)

    - by dangtuantu2002
    I'm using OpenSSL to create digital signature fo my application but I'm getting one problem. BIO *in = NULL, *out = NULL, *tbio = NULL; X509 *scert = NULL; EVP_PKEY *skey = NULL; PKCS7 *p7 = NULL; .......................... .......................... **p7 = PKCS7_sign(scert, skey, NULL, in, flags);** I don't know how can we get digital signature from PKCS7 object to put it into specific variable. Could you please help me to resolve this problem? Thank you very much.

    Read the article

  • OpenSSL in C++ email client - server closes connection with TLSv1 Alert message

    - by mice
    My app connects to a IMAP email server. One client configured his server to reject SSLv2 certificates, and now my app fails to connect to the server. All other email clients connect to this server successfully. My app uses openssl. I debugged by creating minimal openssl client and attempt to connect to the server. Below is the code with connects to the mail server (using Windows sockets, but same problem is with unix sockets). Server sends its initial IMAP greeting message, but after client sends 1st command, server closes connection. In Wireshark, I see that after sending command to server, it returns TLSv1 error message 21 (Encrypted Alert) and connection is gone. I'm looking for proper setup of OpenSSL for this connection to succeed. Thanks #include <stdio.h> #include <memory.h> #include <errno.h> #include <sys/types.h> #include <winsock2.h> #include <openssl/crypto.h> #include <openssl/x509.h> #include <openssl/pem.h> #include <openssl/ssl.h> #include <openssl/err.h> #define CHK_NULL(x) if((x)==NULL) exit(1) #define CHK_ERR(err,s) if((err)==-1) { perror(s); exit(1); } #define CHK_SSL(err) if((err)==-1) { ERR_print_errors_fp(stderr); exit(2); } SSL *ssl; char buf[4096]; void write(const char *s){ int err = SSL_write(ssl, s, strlen(s)); printf("> %s\n", s); CHK_SSL(err); } void read(){ int n = SSL_read(ssl, buf, sizeof(buf) - 1); CHK_SSL(n); if(n==0){ printf("Finished\n"); exit(1); } buf[n] = 0; printf("%s\n", buf); } void main(){ int err=0; SSLeay_add_ssl_algorithms(); SSL_METHOD *meth = SSLv23_client_method(); SSL_load_error_strings(); SSL_CTX *ctx = SSL_CTX_new(meth); CHK_NULL(ctx); WSADATA data; WSAStartup(0x202, &data); int sd = socket(AF_INET, SOCK_STREAM, IPPROTO_TCP); CHK_ERR(sd, "socket"); struct sockaddr_in sa; memset(&sa, 0, sizeof(sa)); sa.sin_family = AF_INET; sa.sin_addr.s_addr = inet_addr("195.137.27.14"); sa.sin_port = htons(993); err = connect(sd,(struct sockaddr*) &sa, sizeof(sa)); CHK_ERR(err, "connect"); /* ----------------------------------------------- */ /* Now we have TCP connection. Start SSL negotiation. */ ssl = SSL_new(ctx); CHK_NULL(ssl); SSL_set_fd(ssl, sd); err = SSL_connect(ssl); CHK_SSL(err); // Following two steps are optional and not required for data exchange to be successful. /* printf("SSL connection using %s\n", SSL_get_cipher(ssl)); X509 *server_cert = SSL_get_peer_certificate(ssl); CHK_NULL(server_cert); printf("Server certificate:\n"); char *str = X509_NAME_oneline(X509_get_subject_name(server_cert),0,0); CHK_NULL(str); printf(" subject: %s\n", str); OPENSSL_free(str); str = X509_NAME_oneline(X509_get_issuer_name (server_cert),0,0); CHK_NULL(str); printf(" issuer: %s\n", str); OPENSSL_free(str); // We could do all sorts of certificate verification stuff here before deallocating the certificate. X509_free(server_cert); */ printf("\n\n"); read(); // get initial IMAP greeting write("1 CAPABILITY\r\n"); // send 1st command read(); // get reply to cmd; server closes connection here write("2 LOGIN a b\r\n"); read(); SSL_shutdown(ssl); closesocket(sd); SSL_free(ssl); SSL_CTX_free(ctx); }

    Read the article

  • ArchBeat Link-o-Rama for November 16, 2012

    - by Bob Rhubart
    X.509 Certificate Revocation Checking Using OCSP protocol with Oracle WebLogic Server 12c | Abhijit Patil Abhijit Patil's article focuses on how to use X.509 Certificate Revocation Checking Functionality with the OCSP protocol to validate in-bound certificates. Although this article focuses on inbound OCSP validation using OCSP, Oracle WebLogic Server 12c also supports outbound OCSP validation. Leveraging Oracle Scorecard and Strategy Management for Everyday BI Needs "Oracle Scorecard and Strategy Management (OSSM) is built-upon the premise that a scorecard system should not be separate from the BI system, like many comparable tools are today," says author Kevin McGinely. "Instead of a separate application with its own data, its own data definitions, and its own front-end, Oracle made the choice to integrate OSSM directly into OBIEE." Applying BI for personal productivity recognition and gamification | Capgemini Oracle Blog "It is quite obvious that if you want people to participate you need an appealing and intuitive user interface," says Capgemini's Henk Vermeulen in this interesting exploration of gamification in the enterprise. Build and release OSB projects with Maven | Edwin Biemond "With Maven we are able to build and deploy OSB projects," says Oracle ACE Edwin Biemond. "The artifacts generated by Maven called snaphosts and releases can be automatically uploaded to a software repository. These versioned OSB jars can then be downloaded by the OSB Servers and deployed." Biemond shows you how in this detailed technical post. ADF Generator for Dynamic ADF BC and ADF UI | Andrejus Baranovskis Oracle ACE Director Andrejus Baranovskis' post is an extension of his OOW12 presentation, "Oracle ADF Implementations Around the Globe: Best Practices," and includes the sample application he promised to share. Service-oriented organizations have a head start in the cloud race | ZDNet ZDNet SOA blogger Joe McKendrick offers a snapshot of a recent report Forrester analyst James Staten. Oracle Fusion Middleware Security: X509 Fallback to Form | Debasish BhattacharyaOracle Fusion Middleware A-Team architect Debasish Bhattacharya shares a solution that resulted from brainstorming with colleagues Chris Johnson and Brian Eidelman. "The solution is not very difficult," says Bhattacharya, "though it needs some additional configurations and coding." It's all presented in this detailed post. Agile Architecture | David Sprott "There is ample evidence that Agile Architecture is a primary contributor to business agility, yet we do not have a well understood architecture management system that integrates with Agile methods," observes David Sprott in this extensive post. Thought for the Day "Operating systems are like underwear — nobody really wants to look at them." — Bill Joy Source: SoftwareQuotes.com

    Read the article

  • Using a GoDaddy SSL certificate with Virtualmin (Webmin)

    - by Kevin
    A client of mine decided to go ahead and move from a self-signed certificate to a commercial one ("GoDaddy Standard SSL"). The first service I wanted to move to the commercial SSL cert was Webmin/Usermin... However, upon migrating to the new SSL cert and restarting Webmin, I got the following error: [21/Oct/2012:13:12:47 -0400] Restarting Failed to open SSL cert /etc/webmin/miniserv.cert at /usr/share/webmin/miniserv.pl line 4229. Error: Webmin server did not write new PID file And that's all it says. Here's Webmin's config file (/etc/webmin/miniserv.conf): port=10000 root=/usr/share/webmin mimetypes=/usr/share/webmin/mime.types addtype_cgi=internal/cgi realm=Webmin Server logfile=/var/webmin/miniserv.log errorlog=/var/webmin/miniserv.error pidfile=/var/webmin/miniserv.pid logtime=168 ppath= ssl=0 env_WEBMIN_CONFIG=/etc/webmin env_WEBMIN_VAR=/var/webmin atboot=1 logout=/etc/webmin/logout-flag listen=10000 denyfile=\.pl$ log=1 blockhost_failures=5 blockhost_time=60 syslog=1 session=1 server=MiniServ/1.600 userfile=/etc/webmin/miniserv.users keyfile=/etc/webmin/miniserv.pem passwd_file=/etc/shadow passwd_uindex=0 passwd_pindex=1 passwd_cindex=2 passwd_mindex=4 passwd_mode=0 preroot=virtual-server-theme passdelay=1 sudo=1 sessiononly=/virtual-server/remote.cgi preload=virtual-server=virtual-server/virtual-server-lib-funcs.pl virtual-server=virtual-server/feature-unix.pl virtual-server=virtual-server/feature-dir.pl virtual-server=virtual-server/feature-dns.pl virtual-server=virtual-server/feature-mail.pl virtual-server=virtual-server/feature-web.pl virtual-server=virtual-server/feature-webalizer.pl virtual-server=virtual-server/feature-ssl.pl virtual-server=virtual-server/feature-logrotate.pl virtual-server=virtual-server/feature-mysql.pl virtual-server=virtual-server/feature-postgres.pl virtual-server=virtual-server/feature-ftp.pl virtual-server=virtual-server/feature-spam.pl virtual-server=virtual-server/feature-virus.pl virtual-server=virtual-server/feature-webmin.pl virtual-server=virtual-server/feature-virt.pl virtual-server=virtual-server/feature-virt6.pl anonymous=/virtualmin-mailman/unauthenticated=anonymous premodules=WebminCore logouttimes= extracas=/etc/webmin/miniserv.chain certfile=/etc/webmin/miniserv.cert ssl_redirect=0 Here is a screen shot of the Webmin SSL config screen as well, for what it's worth: http://postimage.org/image/r472go7tf/ Edited Mon Oct 22 10:45:24 CDT 2012: When running the command openssl x509 -noout -text -in /etc/webmin/miniserv.cert as Falcon Momot suggested, I get the following error: unable to load certificate 139760808240800:error:0906D06C:PEM routines:PEM_read_bio:no start line:pem_lib.c:696:Expecting: TRUSTED CERTIFICATE

    Read the article

  • sftpd: No available certificate or key corresponds to the SSL cipher suites which are enabled?

    - by Arcturus
    Hello. I'm trying to setup vsftpd on Fedora 12. I need to require use of FTPS, and for now need to use a self-signed SSL certificate. I managed to get the vsftpd service running and to connect as my user. I can list the home directory, but as soon as I try to list another directory, download or upload a file, I get this error: No available certificate or key corresponds to the SSL cipher suites which are enabled. And the xfer log is empty. I've been Googling it for a while now, but still can't understand the problem. Here's how I installed vsftpd: su yum install vsftpd chkconfig vsftpd on service vsftpd start I tried to generate the certificate in two ways. Here's the first one: cd /etc/vsftpd openssl req -x509 -nodes -days 365 -newkey rsa:1024 -keyout vsftpd.pem -out vsftpd.pem Here's the second way: cd /etc/pki/tls/certs make vsftpd.pem Here's my vsftpd configuration: anonymous_enable=NO local_enable=YES write_enable=YES local_umask=022 dirmessage_enable=YES xferlog_enable=YES connect_from_port_20=YES xferlog_file=/var/log/vsftpd.log xferlog_std_format=YES nopriv_user=ftpsecure chroot_local_user=YES chroot_list_enable=YES chroot_list_file=/etc/vsftpd/chroot_list listen=YES pam_service_name=vsftpd userlist_enable=YES tcp_wrappers=YES # SSL settings ssl_enable=YES force_local_data_ssl=YES force_local_logins_ssl=YES rsa_cert_file=/etc/pki/tls/certs/vsftpd.pem allow_anon_ssl=NO ssl_tlsv1=YES ssl_sslv2=NO ssl_sslv3=NO Does anyone know what the problem is and how to solve it?

    Read the article

  • openssl client authentication error: tlsv1 alert unknown ca: ... SSL alert number 48

    - by JoJoeDad
    I've generated a certificate using openssl and place it on the client's machine, but when I try to connect to my server using that certificate, I error mentioned in the subject line back from my server. Here's what I've done. 1) I do a test connect using openssl to see what the acceptable client certificate CA names are for my server, I issue this command from my client machine to my server: openssl s_client -connect myupload.mysite.net:443/cgi-bin/posupload.cgi -prexit and part of what I get back is as follow: Acceptable client certificate CA names /C=US/ST=Colorado/L=England/O=Inteliware/OU=Denver Office/CN=Tim Drake/[email protected] /C=US/ST=Colorado/O=Inteliware/OU=Denver Office/CN=myupload.mysite.net/[email protected] 2) Here is what is in the apache configuration file on the server regarding SSL client authentication: SSLCACertificatePath /etc/apache2/certs SSLVerifyClient require SSLVerifyDepth 10 3) I generated a self-signed client certificate called "client.pem" using mypos.pem and mypos.key, so when I run this command: openssl x509 -in client.pem -noout -issuer -subject -serial here is what is returned: issuer= /C=US/ST=Colorado/O=Inteliware/OU=Denver Office/CN=myupload.mysite.net/[email protected] subject= /C=US/ST=Colorado/O=Inteliware/OU=Denver Office/CN=mlR::mlR/[email protected] serial=0E (please note that mypos.pem is in /etc/apache2/certs/ and mypos.key is saved in /etc/apache2/certs/private/) 4) I put client.pem on the client machine, and on the client machine, I run the following command: openssl s_client -connect myupload.mysite.net:443/cgi-bin/posupload.cgi -status -cert client.pem and I get this error: CONNECTED(00000003) OCSP response: no response sent depth=1 /C=US/ST=Colorado/L=England/O=Inteliware/OU=Denver Office/CN=Tim Drake/[email protected] verify error:num=19:self signed certificate in certificate chain verify return:0 574:error:14094418:SSL routines:SSL3_READ_BYTES:tlsv1 alert unknown ca:/SourceCache/OpenSSL098/OpenSSL098-47/src/ssl/s3_pkt.c:1102:SSL alert number 48 574:error:140790E5:SSL routines:SSL23_WRITE:ssl handshake failure:/SourceCache/OpenSSL098/OpenSSL098-47/src/ssl/s23_lib.c:182: I'm really stumped as to what I've done wrong. I've searched quite a bit on this error and what I found is that people are saying the issuing CA of the client's certificate is not trusted by the server, yet when I look at the issuer of my client certificate, it matches to one of the accepted CA returned by my server. Can anyone help, please? Thank you in advance.

    Read the article

  • How often is CRL refreshed, and how to force it to be?

    - by lockstock
    I have a web service running under IIS 7 that requires an X509 client certificate. I know that the server that it rus on needs access to DigiCert.com in order to be able to get the CRL (Certificate Revocation List). There is a need to change our proxy so I am attempting to investigate the impact of doing so. I have removed the global proxy settings using the command netsh winhttp proxy refesh, and also deleted the CRL cache using the command certutil -URLcache CRL delete. However, after doing this, all calls to the web service still succeed. This suggests to me that I am missing something here. So; If the CRL cache is cleared and the server has no way of refreshing the CRL, why do web service requets not return http 403?. I have been unable to find adequate information from googling nor from my colleagues. The reason I want it to fail is that I will not be confident that the new proxy settings work until I can see it broken first, if that makes sense. I would also like to be able to force the CRL to be refeshed in order to ensure that the new proxy settings work

    Read the article

  • Using secure proxies with Google Chrome

    - by cYrus
    Whenever I use a secure proxy with Google Chrome I get ERR_PROXY_CERTIFICATE_INVALID, I tried a lot of different scenarios and versions. The certificate I'm using a self-signed certificate: openssl genrsa -out key.pem 1024 openssl req -new -key key.pem -out request.pem openssl x509 -req -days 30 -in request.pem -signkey key.pem -out certificate.pem Note: this certificate works (with a warning since it's self-signed) when I try to setup a simple HTTPS server. The proxy Then I start a secure proxy on localhost:8080. There are a several ways to accomplish this, I tried: a custom Node.js script; stunnel; node-spdyproxy (OK, this involves SPDY too, but later... the problem is the same); [...] The browser Then I run Google Chrome with: google-chrome --proxy-server=https://localhost:8080 http://superuser.com to load, say, http://superuser.com. The issue All I get is: Error 136 (net::ERR_PROXY_CERTIFICATE_INVALID): Unknown error. in the window, and something like: [13633:13639:1017/182333:ERROR:cert_verify_proc_nss.cc(790)] CERT_PKIXVerifyCert for localhost failed err=-8179 in the console. Note: this is not the big red warning that complains about insecure certificates. Now, I have to admit that I'm quite n00b for what concerns certificates and such, if I'm missing some fundamental points, please let me know.

    Read the article

  • first time setting up ssl, running into a strange problem, tutorials haven't been too helpful

    - by pedalpete
    This is my first time trying to set-up an ssl for one a site, and I'm running it on a server that has 3 other sites already hosted. I'm running apache2.?? and the install came with an ssl.conf page. The ssl.conf has the following settings LoadModule ssl_module modules/mod_ssl.so Listen 443 AddType application/x-x509-ca-cert .crt AddType application/x-pkcs7-crl .crl <VirtualHost *:443> ServerAdmin [email protected] DocumentRoot /var/www/html/securesite ServerName securesite.com ErrorLog logs/securesite-error_log CustomLog logs/securesite-access_log common SSLEngine on SSLCertificateFile /etc/httpd/ssl.crt/securesite.com.crt SSLCertificateKeyFile /etc/httpd/ssl.key/server.key SSLCertificateChainFile /etc/httpd/ssl.crt/gd_bundle.crt </VirtualHost> When I run 'apachectl configtest', I don't get any errors, but running 'apachectl -k restart', I get 'httpd not running, trying to start'. I have two questions 1) Is there an error in the way I'm defining my virtualhost for 443?? the rest of my entries point to <VirtualHost *:80. When I comment out the above entry, apache runs fine. 2) do I need to set-up a redirect from port 80 for secure site? Because most users are going to go to http: or www. , and I need to send them to https: does apache do this automatically? or do i need to create an entry with a redirect?

    Read the article

  • apache: can't renew ssl certificate

    - by Caballero
    I have Godaddy SSL certificate for one website on my dedicated server running Centos 5.3 / Apache 2.2.3. I have renewed certificate on Godaddy recently, however now it's showing as expired on my website. I've re-keyed certificate since and reuploaded domain.key, domain.crt and bundle.crt (example file names) files to the server, restarted apache, but the sertificate still shows as expired. I'm running out of clues. I've tried replacing content of .crt files with jiberish and restart apache - it's still showing that certificate is expired, even though it shouldn't be picked up at all. I eventually rebooted dedicated server, still no luck. I'm using free SSL check tool http://www.digicert.com/help/ which clearly shows all the green checks except one - certificate is expired. Has someone any idea what might be causing this? Could there be some kind of caching going on here? UPDATE: after running openssl x509 -in domain.crt -noout -enddate I'm getting this output: notAfter=Jun 2 08:16:51 2013 GMT So I asume this means I have the right certificate on the server and yet the old expired one shows on the web...

    Read the article

  • Windows 7 remote desktop encryption error every few minutes

    - by rfrankel
    Because of an error in data encryption, this session will now end. This is the error I've been getting more and more frequently over the past few days, to the point that I can't ignore it because it's happening consistently within 5 minutes of connecting - sometimes within a few seconds. Both the remote and local machines are Windows 7 Pro x64. The remote machine is behind a Linksys RV082, and I'm using UPnP to forward a remote port to the correct local port. This setup had been working fine for several months, and I can't think of any recent relevant changes that might have been made. Things I've already tried: Disabling unnecessary components of the network connection on the remote machine, until only IPv4 and Client for Microsoft Networks remain. Disabling TCP large send offload on both the remote and local machines. Confirming that the remote machine is not mentioned anywhere in any DMZ settings on the Linksys router. Confirming that there are no x509-related registry keys screwing things up (this is the suggested fix for a slightly different error anyway). These are the only solutions I've been able to find after about an hour of searching, and most of them apply to XP or Server 2003 in any case. If anyone could suggest something else, it would be much appreciated.

    Read the article

  • IPsec tunnel to Android device not created even though there is an IKE SA

    - by Quentin Swain
    I'm trying to configure a VPN tunnel between an Android device running 4.1 and a Fedora 17 Linux box running strongSwan 5.0. The device reports that it is connected and strongSwan statusall returns that there is an IKE SA, but doesn't display a tunnel. I used the instructions for iOS in the wiki to generate certificates and configure strongSwan. Since Android uses a modified version of racoon this should work and since the connection is partly established I think I am on the right track. I don't see any errors about not being able to create the tunnel. This is the configuration for the strongSwan connection conn android2 keyexchange=ikev1 authby=xauthrsasig xauth=server left=96.244.142.28 leftsubnet=0.0.0.0/0 leftfirewall=yes leftcert=serverCert.pem right=%any rightsubnet=10.0.0.0/24 rightsourceip=10.0.0.2 rightcert=clientCert.pem ike=aes256-sha1-modp1024 auto=add This is the output of strongswan statusall Status of IKE charon daemon (strongSwan 5.0.0, Linux 3.3.4-5.fc17.x86_64, x86_64): uptime: 20 minutes, since Oct 31 10:27:31 2012 malloc: sbrk 270336, mmap 0, used 198144, free 72192 worker threads: 8 of 16 idle, 7/1/0/0 working, job queue: 0/0/0/0, scheduled: 7 loaded plugins: charon aes des sha1 sha2 md5 random nonce x509 revocation constraints pubkey pkcs1 pkcs8 pgp dnskey pem openssl fips-prf gmp xcbc cmac hmac attr kernel-netlink resolve socket-default stroke updown xauth-generic Virtual IP pools (size/online/offline): android-hybrid: 1/0/0 android2: 1/1/0 Listening IP addresses: 96.244.142.28 Connections: android-hybrid: %any...%any IKEv1 android-hybrid: local: [C=CH, O=strongSwan, CN=vpn.strongswan.org] uses public key authentication android-hybrid: cert: "C=CH, O=strongSwan, CN=vpn.strongswan.org" android-hybrid: remote: [%any] uses XAuth authentication: any android-hybrid: child: dynamic === dynamic TUNNEL android2: 96.244.142.28...%any IKEv1 android2: local: [C=CH, O=strongSwan, CN=vpn.strongswan.org] uses public key authentication android2: cert: "C=CH, O=strongSwan, CN=vpn.strongswan.org" android2: remote: [C=CH, O=strongSwan, CN=client] uses public key authentication android2: cert: "C=CH, O=strongSwan, CN=client" android2: remote: [%any] uses XAuth authentication: any android2: child: 0.0.0.0/0 === 10.0.0.0/24 TUNNEL Security Associations (1 up, 0 connecting): android2[3]: ESTABLISHED 10 seconds ago, 96.244.142.28[C=CH, O=strongSwan, CN=vpn.strongswan.org]...208.54.35.241[C=CH, O=strongSwan, CN=client] android2[3]: Remote XAuth identity: android android2[3]: IKEv1 SPIs: 4151e371ad46b20d_i 59a56390d74792d2_r*, public key reauthentication in 56 minutes android2[3]: IKE proposal: AES_CBC_256/HMAC_SHA1_96/PRF_HMAC_SHA1/MODP_1024 The output of ip -s xfrm policy src ::/0 dst ::/0 uid 0 socket in action allow index 3851 priority 0 ptype main share any flag (0x00000000) lifetime config: limit: soft 0(bytes), hard 0(bytes) limit: soft 0(packets), hard 0(packets) expire add: soft 0(sec), hard 0(sec) expire use: soft 0(sec), hard 0(sec) lifetime current: 0(bytes), 0(packets) add 2012-10-31 13:29:08 use - src ::/0 dst ::/0 uid 0 socket out action allow index 3844 priority 0 ptype main share any flag (0x00000000) lifetime config: limit: soft 0(bytes), hard 0(bytes) limit: soft 0(packets), hard 0(packets) expire add: soft 0(sec), hard 0(sec) expire use: soft 0(sec), hard 0(sec) lifetime current: 0(bytes), 0(packets) add 2012-10-31 13:29:08 use - src ::/0 dst ::/0 uid 0 socket in action allow index 3835 priority 0 ptype main share any flag (0x00000000) lifetime config: limit: soft 0(bytes), hard 0(bytes) limit: soft 0(packets), hard 0(packets) expire add: soft 0(sec), hard 0(sec) expire use: soft 0(sec), hard 0(sec) lifetime current: 0(bytes), 0(packets) add 2012-10-31 13:29:08 use - src ::/0 dst ::/0 uid 0 socket out action allow index 3828 priority 0 ptype main share any flag (0x00000000) lifetime config: limit: soft 0(bytes), hard 0(bytes) limit: soft 0(packets), hard 0(packets) expire add: soft 0(sec), hard 0(sec) expire use: soft 0(sec), hard 0(sec) lifetime current: 0(bytes), 0(packets) add 2012-10-31 13:29:08 use - src 0.0.0.0/0 dst 0.0.0.0/0 uid 0 socket in action allow index 3819 priority 0 ptype main share any flag (0x00000000) lifetime config: limit: soft 0(bytes), hard 0(bytes) limit: soft 0(packets), hard 0(packets) expire add: soft 0(sec), hard 0(sec) expire use: soft 0(sec), hard 0(sec) lifetime current: 0(bytes), 0(packets) add 2012-10-31 13:29:08 use 2012-10-31 13:29:39 src 0.0.0.0/0 dst 0.0.0.0/0 uid 0 socket out action allow index 3812 priority 0 ptype main share any flag (0x00000000) lifetime config: limit: soft 0(bytes), hard 0(bytes) limit: soft 0(packets), hard 0(packets) expire add: soft 0(sec), hard 0(sec) expire use: soft 0(sec), hard 0(sec) lifetime current: 0(bytes), 0(packets) add 2012-10-31 13:29:08 use 2012-10-31 13:29:22 src 0.0.0.0/0 dst 0.0.0.0/0 uid 0 socket in action allow index 3803 priority 0 ptype main share any flag (0x00000000) lifetime config: limit: soft 0(bytes), hard 0(bytes) limit: soft 0(packets), hard 0(packets) expire add: soft 0(sec), hard 0(sec) expire use: soft 0(sec), hard 0(sec) lifetime current: 0(bytes), 0(packets) add 2012-10-31 13:29:08 use 2012-10-31 13:29:20 src 0.0.0.0/0 dst 0.0.0.0/0 uid 0 socket out action allow index 3796 priority 0 ptype main share any flag (0x00000000) lifetime config: limit: soft 0(bytes), hard 0(bytes) limit: soft 0(packets), hard 0(packets) expire add: soft 0(sec), hard 0(sec) expire use: soft 0(sec), hard 0(sec) lifetime current: 0(bytes), 0(packets) add 2012-10-31 13:29:08 use 2012-10-31 13:29:20 So a xfrm policy isn't being created for the connection, even though there is an SA between device and strongswan. Executing ip -s xfrm policy on the android device results in the following output: src 0.0.0.0/0 dst 10.0.0.2/32 uid 0 dir in action allow index 40 priority 2147483648 share any flag (0x00000000) lifetime config: limit: soft (INF)(bytes), hard (INF)(bytes) limit: soft (INF)(packets), hard (INF)(packets) expire add: soft 0(sec), hard 0(sec) expire use: soft 0(sec), hard 0(sec) lifetime current: 0(bytes), 0(packets) add 2012-10-31 13:42:08 use - tmpl src 96.244.142.28 dst 25.239.33.30 proto esp spi 0x00000000(0) reqid 0(0x00000000) mode tunnel level required share any enc-mask 00000000 auth-mask 00000000 comp-mask 00000000 src 10.0.0.2/32 dst 0.0.0.0/0 uid 0 dir out action allow index 33 priority 2147483648 share any flag (0x00000000) lifetime config: limit: soft (INF)(bytes), hard (INF)(bytes) limit: soft (INF)(packets), hard (INF)(packets) expire add: soft 0(sec), hard 0(sec) expire use: soft 0(sec), hard 0(sec) lifetime current: 0(bytes), 0(packets) add 2012-10-31 13:42:08 use - tmpl src 25.239.33.30 dst 96.244.142.28 proto esp spi 0x00000000(0) reqid 0(0x00000000) mode tunnel level required share any enc-mask 00000000 auth-mask 00000000 comp-mask 00000000 src 0.0.0.0/0 dst 0.0.0.0/0 uid 0 dir 4 action allow index 28 priority 0 share any flag (0x00000000) lifetime config: limit: soft (INF)(bytes), hard (INF)(bytes) limit: soft (INF)(packets), hard (INF)(packets) expire add: soft 0(sec), hard 0(sec) expire use: soft 0(sec), hard 0(sec) lifetime current: 0(bytes), 0(packets) add 2012-10-31 13:42:04 use 2012-10-31 13:42:08 src 0.0.0.0/0 dst 0.0.0.0/0 uid 0 dir 3 action allow index 19 priority 0 share any flag (0x00000000) lifetime config: limit: soft (INF)(bytes), hard (INF)(bytes) limit: soft (INF)(packets), hard (INF)(packets) expire add: soft 0(sec), hard 0(sec) expire use: soft 0(sec), hard 0(sec) lifetime current: 0(bytes), 0(packets) add 2012-10-31 13:42:04 use 2012-10-31 13:42:08 src 0.0.0.0/0 dst 0.0.0.0/0 uid 0 dir 4 action allow index 12 priority 0 share any flag (0x00000000) lifetime config: limit: soft (INF)(bytes), hard (INF)(bytes) limit: soft (INF)(packets), hard (INF)(packets) expire add: soft 0(sec), hard 0(sec) expire use: soft 0(sec), hard 0(sec) lifetime current: 0(bytes), 0(packets) add 2012-10-31 13:42:04 use 2012-10-31 13:42:06 src 0.0.0.0/0 dst 0.0.0.0/0 uid 0 dir 3 action allow index 3 priority 0 share any flag (0x00000000) lifetime config: limit: soft (INF)(bytes), hard (INF)(bytes) limit: soft (INF)(packets), hard (INF)(packets) expire add: soft 0(sec), hard 0(sec) expire use: soft 0(sec), hard 0(sec) lifetime current: 0(bytes), 0(packets) add 2012-10-31 13:42:04 use 2012-10-31 13:42:07 Logs from charon: 00[DMN] Starting IKE charon daemon (strongSwan 5.0.0, Linux 3.3.4-5.fc17.x86_64, x86_64) 00[KNL] listening on interfaces: 00[KNL] em1 00[KNL] 96.244.142.28 00[KNL] fe80::224:e8ff:fed2:18b2 00[CFG] loading ca certificates from '/etc/strongswan/ipsec.d/cacerts' 00[CFG] loaded ca certificate "C=CH, O=strongSwan, CN=strongSwan CA" from '/etc/strongswan/ipsec.d/cacerts/caCert.pem' 00[CFG] loading aa certificates from '/etc/strongswan/ipsec.d/aacerts' 00[CFG] loading ocsp signer certificates from '/etc/strongswan/ipsec.d/ocspcerts' 00[CFG] loading attribute certificates from '/etc/strongswan/ipsec.d/acerts' 00[CFG] loading crls from '/etc/strongswan/ipsec.d/crls' 00[CFG] loading secrets from '/etc/strongswan/ipsec.secrets' 00[CFG] loaded RSA private key from '/etc/strongswan/ipsec.d/private/clientKey.pem' 00[CFG] loaded IKE secret for %any 00[CFG] loaded EAP secret for android 00[CFG] loaded EAP secret for android 00[DMN] loaded plugins: charon aes des sha1 sha2 md5 random nonce x509 revocation constraints pubkey pkcs1 pkcs8 pgp dnskey pem openssl fips-prf gmp xcbc cmac hmac attr kernel-netlink resolve socket-default stroke updown xauth-generic 08[NET] waiting for data on sockets 16[LIB] created thread 16 [15338] 16[JOB] started worker thread 16 11[CFG] received stroke: add connection 'android-hybrid' 11[CFG] conn android-hybrid 11[CFG] left=%any 11[CFG] leftsubnet=(null) 11[CFG] leftsourceip=(null) 11[CFG] leftauth=pubkey 11[CFG] leftauth2=(null) 11[CFG] leftid=(null) 11[CFG] leftid2=(null) 11[CFG] leftrsakey=(null) 11[CFG] leftcert=serverCert.pem 11[CFG] leftcert2=(null) 11[CFG] leftca=(null) 11[CFG] leftca2=(null) 11[CFG] leftgroups=(null) 11[CFG] leftupdown=ipsec _updown iptables 11[CFG] right=%any 11[CFG] rightsubnet=(null) 11[CFG] rightsourceip=96.244.142.3 11[CFG] rightauth=xauth 11[CFG] rightauth2=(null) 11[CFG] rightid=%any 11[CFG] rightid2=(null) 11[CFG] rightrsakey=(null) 11[CFG] rightcert=(null) 11[CFG] rightcert2=(null) 11[CFG] rightca=(null) 11[CFG] rightca2=(null) 11[CFG] rightgroups=(null) 11[CFG] rightupdown=(null) 11[CFG] eap_identity=(null) 11[CFG] aaa_identity=(null) 11[CFG] xauth_identity=(null) 11[CFG] ike=aes256-sha1-modp1024 11[CFG] esp=aes128-sha1-modp2048,3des-sha1-modp1536 11[CFG] dpddelay=30 11[CFG] dpdtimeout=150 11[CFG] dpdaction=0 11[CFG] closeaction=0 11[CFG] mediation=no 11[CFG] mediated_by=(null) 11[CFG] me_peerid=(null) 11[CFG] keyexchange=ikev1 11[KNL] getting interface name for %any 11[KNL] %any is not a local address 11[KNL] getting interface name for %any 11[KNL] %any is not a local address 11[CFG] left nor right host is our side, assuming left=local 11[CFG] loaded certificate "C=CH, O=strongSwan, CN=vpn.strongswan.org" from 'serverCert.pem' 11[CFG] id '%any' not confirmed by certificate, defaulting to 'C=CH, O=strongSwan, CN=vpn.strongswan.org' 11[CFG] added configuration 'android-hybrid' 11[CFG] adding virtual IP address pool 'android-hybrid': 96.244.142.3/32 13[CFG] received stroke: add connection 'android2' 13[CFG] conn android2 13[CFG] left=96.244.142.28 13[CFG] leftsubnet=0.0.0.0/0 13[CFG] leftsourceip=(null) 13[CFG] leftauth=pubkey 13[CFG] leftauth2=(null) 13[CFG] leftid=(null) 13[CFG] leftid2=(null) 13[CFG] leftrsakey=(null) 13[CFG] leftcert=serverCert.pem 13[CFG] leftcert2=(null) 13[CFG] leftca=(null) 13[CFG] leftca2=(null) 13[CFG] leftgroups=(null) 13[CFG] leftupdown=ipsec _updown iptables 13[CFG] right=%any 13[CFG] rightsubnet=10.0.0.0/24 13[CFG] rightsourceip=10.0.0.2 13[CFG] rightauth=pubkey 13[CFG] rightauth2=xauth 13[CFG] rightid=(null) 13[CFG] rightid2=(null) 13[CFG] rightrsakey=(null) 13[CFG] rightcert=clientCert.pem 13[CFG] rightcert2=(null) 13[CFG] rightca=(null) 13[CFG] rightca2=(null) 13[CFG] rightgroups=(null) 13[CFG] rightupdown=(null) 13[CFG] eap_identity=(null) 13[CFG] aaa_identity=(null) 13[CFG] xauth_identity=(null) 13[CFG] ike=aes256-sha1-modp1024 13[CFG] esp=aes128-sha1-modp2048,3des-sha1-modp1536 13[CFG] dpddelay=30 13[CFG] dpdtimeout=150 13[CFG] dpdaction=0 13[CFG] closeaction=0 13[CFG] mediation=no 13[CFG] mediated_by=(null) 13[CFG] me_peerid=(null) 13[CFG] keyexchange=ikev0 13[KNL] getting interface name for %any 13[KNL] %any is not a local address 13[KNL] getting interface name for 96.244.142.28 13[KNL] 96.244.142.28 is on interface em1 13[CFG] loaded certificate "C=CH, O=strongSwan, CN=vpn.strongswan.org" from 'serverCert.pem' 13[CFG] id '96.244.142.28' not confirmed by certificate, defaulting to 'C=CH, O=strongSwan, CN=vpn.strongswan.org' 13[CFG] loaded certificate "C=CH, O=strongSwan, CN=client" from 'clientCert.pem' 13[CFG] id '%any' not confirmed by certificate, defaulting to 'C=CH, O=strongSwan, CN=client' 13[CFG] added configuration 'android2' 13[CFG] adding virtual IP address pool 'android2': 10.0.0.2/32 08[NET] received packet: from 208.54.35.241[32235] to 96.244.142.28[500] 15[CFG] looking for an ike config for 96.244.142.28...208.54.35.241 15[CFG] candidate: %any...%any, prio 2 15[CFG] candidate: 96.244.142.28...%any, prio 5 15[CFG] found matching ike config: 96.244.142.28...%any with prio 5 01[JOB] next event in 29s 999ms, waiting 15[IKE] received NAT-T (RFC 3947) vendor ID 15[IKE] received draft-ietf-ipsec-nat-t-ike-02 vendor ID 15[IKE] received draft-ietf-ipsec-nat-t-ike-02\n vendor ID 15[IKE] received draft-ietf-ipsec-nat-t-ike-00 vendor ID 15[IKE] received XAuth vendor ID 15[IKE] received Cisco Unity vendor ID 15[IKE] received DPD vendor ID 15[IKE] 208.54.35.241 is initiating a Main Mode IKE_SA 15[IKE] IKE_SA (unnamed)[1] state change: CREATED => CONNECTING 15[CFG] selecting proposal: 15[CFG] proposal matches 15[CFG] received proposals: IKE:AES_CBC_256/HMAC_SHA1_96/PRF_HMAC_SHA1/MODP_1024, IKE:AES_CBC_256/HMAC_MD5_96/PRF_HMAC_MD5/MODP_1024, IKE:AES_CBC_128/HMAC_SHA1_96/PRF_HMAC_SHA1/MODP_1024, IKE:AES_CBC_128/HMAC_MD5_96/PRF_HMAC_MD5/MODP_1024, IKE:3DES_CBC/HMAC_SHA1_96/PRF_HMAC_SHA1/MODP_1024, IKE:3DES_CBC/HMAC_MD5_96/PRF_HMAC_MD5/MODP_1024, IKE:DES_CBC/HMAC_SHA1_96/PRF_HMAC_SHA1/MODP_1024, IKE:DES_CBC/HMAC_MD5_96/PRF_HMAC_MD5/MODP_1024 15[CFG] configured proposals: IKE:AES_CBC_256/HMAC_SHA1_96/PRF_HMAC_SHA1/MODP_1024, IKE:AES_CBC_128/AES_CBC_192/AES_CBC_256/3DES_CBC/CAMELLIA_CBC_128/CAMELLIA_CBC_192/CAMELLIA_CBC_256/HMAC_MD5_96/HMAC_SHA1_96/HMAC_SHA2_256_128/HMAC_SHA2_384_192/HMAC_SHA2_512_256/AES_XCBC_96/AES_CMAC_96/PRF_HMAC_MD5/PRF_HMAC_SHA1/PRF_HMAC_SHA2_256/PRF_HMAC_SHA2_384/PRF_HMAC_SHA2_512/PRF_AES128_XCBC/PRF_AES128_CMAC/MODP_2048/MODP_2048_224/MODP_2048_256/MODP_1536/MODP_4096/MODP_8192/MODP_1024/MODP_1024_160 15[CFG] selected proposal: IKE:AES_CBC_256/HMAC_SHA1_96/PRF_HMAC_SHA1/MODP_1024 15[NET] sending packet: from 96.244.142.28[500] to 208.54.35.241[32235] 04[NET] sending packet: from 96.244.142.28[500] to 208.54.35.241[32235] 15[MGR] checkin IKE_SA (unnamed)[1] 15[MGR] check-in of IKE_SA successful. 08[NET] received packet: from 208.54.35.241[32235] to 96.244.142.28[500] 08[NET] waiting for data on sockets 07[MGR] checkout IKE_SA by message 07[MGR] IKE_SA (unnamed)[1] successfully checked out 07[NET] received packet: from 208.54.35.241[32235] to 96.244.142.28[500] 07[LIB] size of DH secret exponent: 1023 bits 07[IKE] remote host is behind NAT 07[IKE] sending cert request for "C=CH, O=strongSwan, CN=strongSwan CA" 07[ENC] generating NAT_D_V1 payload finished 07[NET] sending packet: from 96.244.142.28[500] to 208.54.35.241[32235] 07[MGR] checkin IKE_SA (unnamed)[1] 07[MGR] check-in of IKE_SA successful. 04[NET] sending packet: from 96.244.142.28[500] to 208.54.35.241[32235] 08[NET] received packet: from 208.54.35.241[35595] to 96.244.142.28[4500] 10[IKE] ignoring certificate request without data 10[IKE] received end entity cert "C=CH, O=strongSwan, CN=client" 10[CFG] looking for XAuthInitRSA peer configs matching 96.244.142.28...208.54.35.241[C=CH, O=strongSwan, CN=client] 10[CFG] candidate "android-hybrid", match: 1/1/2/2 (me/other/ike/version) 10[CFG] candidate "android2", match: 1/20/5/1 (me/other/ike/version) 10[CFG] selected peer config "android2" 10[CFG] certificate "C=CH, O=strongSwan, CN=client" key: 2048 bit RSA 10[CFG] using trusted ca certificate "C=CH, O=strongSwan, CN=strongSwan CA" 10[CFG] checking certificate status of "C=CH, O=strongSwan, CN=client" 10[CFG] ocsp check skipped, no ocsp found 10[CFG] certificate status is not available 10[CFG] certificate "C=CH, O=strongSwan, CN=strongSwan CA" key: 2048 bit RSA 10[CFG] reached self-signed root ca with a path length of 0 10[CFG] using trusted certificate "C=CH, O=strongSwan, CN=client" 10[IKE] authentication of 'C=CH, O=strongSwan, CN=client' with RSA successful 10[ENC] added payload of type ID_V1 to message 10[ENC] added payload of type SIGNATURE_V1 to message 10[IKE] authentication of 'C=CH, O=strongSwan, CN=vpn.strongswan.org' (myself) successful 10[IKE] queueing XAUTH task 10[IKE] sending end entity cert "C=CH, O=strongSwan, CN=vpn.strongswan.org" 10[NET] sending packet: from 96.244.142.28[4500] to 208.54.35.241[35595] 04[NET] sending packet: from 96.244.142.28[4500] to 208.54.35.241[35595] 10[IKE] activating new tasks 10[IKE] activating XAUTH task 10[NET] sending packet: from 96.244.142.28[4500] to 208.54.35.241[35595] 04[NET] sending packet: from 96.244.142.28[4500] to 208.54.35.241[35595] 01[JOB] next event in 3s 999ms, waiting 10[MGR] checkin IKE_SA android2[1] 10[MGR] check-in of IKE_SA successful. 08[NET] received packet: from 208.54.35.241[35595] to 96.244.142.28[4500] 08[NET] waiting for data on sockets 12[MGR] checkout IKE_SA by message 12[MGR] IKE_SA android2[1] successfully checked out 12[NET] received packet: from 208.54.35.241[35595] to 96.244.142.28[4500] 12[MGR] checkin IKE_SA android2[1] 12[MGR] check-in of IKE_SA successful. 08[NET] received packet: from 208.54.35.241[35595] to 96.244.142.28[4500] 16[MGR] checkout IKE_SA by message 16[MGR] IKE_SA android2[1] successfully checked out 16[NET] received packet: from 208.54.35.241[35595] to 96.244.142.28[4500] 08[NET] waiting for data on sockets 16[IKE] XAuth authentication of 'android' successful 16[IKE] reinitiating already active tasks 16[IKE] XAUTH task 16[NET] sending packet: from 96.244.142.28[4500] to 208.54.35.241[35595] 04[NET] sending packet: from 96.244.142.28[4500] to 208.54.35.241[35595] 16[MGR] checkin IKE_SA android2[1] 01[JOB] next event in 3s 907ms, waiting 16[MGR] check-in of IKE_SA successful. 08[NET] received packet: from 208.54.35.241[35595] to 96.244.142.28[4500] 09[MGR] checkout IKE_SA by message 09[MGR] IKE_SA android2[1] successfully checked out 09[NET] received packet: from 208.54.35.241[35595] to 96.244.142.28[4500] .8rS 09[IKE] IKE_SA android2[1] established between 96.244.142.28[C=CH, O=strongSwan, CN=vpn.strongswan.org]...208.54.35.241[C=CH, O=strongSwan, CN=client] 09[IKE] IKE_SA android2[1] state change: CONNECTING => ESTABLISHED 09[IKE] scheduling reauthentication in 3409s 09[IKE] maximum IKE_SA lifetime 3589s 09[IKE] activating new tasks 09[IKE] nothing to initiate 09[MGR] checkin IKE_SA android2[1] 09[MGR] check-in of IKE_SA successful. 09[MGR] checkout IKE_SA 09[MGR] IKE_SA android2[1] successfully checked out 09[MGR] checkin IKE_SA android2[1] 09[MGR] check-in of IKE_SA successful. 01[JOB] next event in 3s 854ms, waiting 08[NET] waiting for data on sockets 08[NET] received packet: from 208.54.35.241[35595] to 96.244.142.28[4500] 14[MGR] checkout IKE_SA by message 14[MGR] IKE_SA android2[1] successfully checked out 14[NET] received packet: from 208.54.35.241[35595] to 96.244.142.28[4500] 14[IKE] processing INTERNAL_IP4_ADDRESS attribute 14[IKE] processing INTERNAL_IP4_NETMASK attribute 14[IKE] processing INTERNAL_IP4_DNS attribute 14[IKE] processing INTERNAL_IP4_NBNS attribute 14[IKE] processing UNITY_BANNER attribute 14[IKE] processing UNITY_DEF_DOMAIN attribute 14[IKE] processing UNITY_SPLITDNS_NAME attribute 14[IKE] processing UNITY_SPLIT_INCLUDE attribute 14[IKE] processing UNITY_LOCAL_LAN attribute 14[IKE] processing APPLICATION_VERSION attribute 14[IKE] peer requested virtual IP %any 14[CFG] assigning new lease to 'android' 14[IKE] assigning virtual IP 10.0.0.2 to peer 'android' 14[NET] sending packet: from 96.244.142.28[4500] to 208.54.35.241[35595] 14[MGR] checkin IKE_SA android2[1] 14[MGR] check-in of IKE_SA successful. 04[NET] sending packet: from 96.244.142.28[4500] to 208.54.35.241[35595] 08[NET] waiting for data on sockets 01[JOB] got event, queuing job for execution 01[JOB] next event in 91ms, waiting 13[MGR] checkout IKE_SA 13[MGR] IKE_SA android2[1] successfully checked out 13[MGR] checkin IKE_SA android2[1] 13[MGR] check-in of IKE_SA successful. 01[JOB] got event, queuing job for execution 01[JOB] next event in 24s 136ms, waiting 15[MGR] checkout IKE_SA 15[MGR] IKE_SA android2[1] successfully checked out 15[MGR] checkin IKE_SA android2[1] 15[MGR] check-in of IKE_SA successful.

    Read the article

  • SSL authentication error: RemoteCertificateChainErrors on ASP.NET on Ubuntu

    - by Frank Krueger
    I am trying to access Gmail's SMTP service from an ASP.NET MVC site running under Mono 2.4.2.3. But I keep getting this error: System.InvalidOperationException: SSL authentication error: RemoteCertificateChainErrors at System.Net.Mail.SmtpClient.m__3 (System.Object sender, System.Security.Cryptography.X509Certificates.X509Certificate certificate, System.Security.Cryptography.X509Certificates.X509Chain chain, SslPolicyErrors sslPolicyErrors) [0x00000] at System.Net.Security.SslStream+c__AnonStorey9.m__9 (System.Security.Cryptography.X509Certificates.X509Certificate cert, System.Int32[] certErrors) [0x00000] at Mono.Security.Protocol.Tls.SslClientStream.OnRemoteCertificateValidation (System.Security.Cryptography.X509Certificates.X509Certificate certificate, System.Int32[] errors) [0x00000] at Mono.Security.Protocol.Tls.SslStreamBase.RaiseRemoteCertificateValidation (System.Security.Cryptography.X509Certificates.X509Certificate certificate, System.Int32[] errors) [0x00000] at Mono.Security.Protocol.Tls.SslClientStream.RaiseServerCertificateValidation (System.Security.Cryptography.X509Certificates.X509Certificate certificate, System.Int32[] certificateErrors) [0x00000] at Mono.Security.Protocol.Tls.Handshake.Client.TlsServerCertificate.validateCertificates (Mono.Security.X509.X509CertificateCollection certificates) [0x00000] at Mono.Security.Protocol.Tls.Handshake.Client.TlsServerCertificate.ProcessAsTls1 () [0x00000] at Mono.Security.Protocol.Tls.Handshake.HandshakeMessage.Process () [0x00000] at (wrapper remoting-invoke-with-check) Mono.Security.Protocol.Tls.Handshake.HandshakeMessage:Process () at Mono.Security.Protocol.Tls.ClientRecordProtocol.ProcessHandshakeMessage (Mono.Security.Protocol.Tls.TlsStream handMsg) [0x00000] at Mono.Security.Protocol.Tls.RecordProtocol.InternalReceiveRecordCallback (IAsyncResult asyncResult) [0x00000] I have installed certificates using: certmgr -ssl -m smtps://smtp.gmail.com:465 with this output: Mono Certificate Manager - version 2.4.2.3 Manage X.509 certificates and CRL from stores. Copyright 2002, 2003 Motus Technologies. Copyright 2004-2008 Novell. BSD licensed. X.509 Certificate v3 Issued from: C=US, O=Equifax, OU=Equifax Secure Certificate Authority Issued to: C=US, O=Google Inc, CN=Google Internet Authority Valid from: 06/08/2009 20:43:27 Valid until: 06/07/2013 19:43:27 *** WARNING: Certificate signature is INVALID *** Import this certificate into the CA store ?yes X.509 Certificate v3 Issued from: C=US, O=Google Inc, CN=Google Internet Authority Issued to: C=US, S=California, L=Mountain View, O=Google Inc, CN=smtp.gmail.com Valid from: 04/22/2010 20:02:45 Valid until: 04/22/2011 20:12:45 Import this certificate into the AddressBook store ?yes 2 certificates added to the stores. In fact, this worked for a month but mysteriously stopped working on May 5. I installed these new certs today, but I am still getting these errors.

    Read the article

  • perl Client-SSL-Warning: Peer certificate not verified

    - by Jeremey
    I am having trouble with a perl screenscraper to an HTTPS site. In debugging, I ran the following: print $res->headers_as_string; and in the output, I have the following line: Client-SSL-Warning: Peer certificate not verified Is there a way I can auto-accept this certificate, or is that not the problem? #!/usr/bin/perl use LWP::UserAgent; use Crypt::SSLeay::CTX; use Crypt::SSLeay::Conn; use Crypt::SSLeay::X509; use LWP::Simple qw(get); my $ua = LWP::UserAgent->new; my $req = HTTP::Request->new(GET => 'https://vzw-cat.sun4.lightsurf.net/vzwcampaignadmin/'); my $res = $ua->request($req); print $res->headers_as_string; output: Cache-Control: no-cache Connection: close Date: Tue, 01 Jun 2010 19:28:08 GMT Pragma: No-cache Server: Apache Content-Type: text/html Expires: Wed, 31 Dec 1969 16:00:00 PST Client-Date: Tue, 01 Jun 2010 19:28:09 GMT Client-Peer: 64.152.68.114:443 Client-Response-Num: 1 Client-SSL-Cert-Issuer: /O=VeriSign Trust Network/OU=VeriSign, Inc./OU=VeriSign International Server CA - Class 3/OU=www.verisign.com/CPS Incorp.by Ref. LIABILITY LTD.(c)97 VeriSign Client-SSL-Cert-Subject: /C=US/ST=Massachusetts/L=Boston/O=verizon wireless/OU=TERMS OF USE AT WWW.VERISIGN.COM/RPA (C)00/CN=PSMSADMIN.VZW.COM Client-SSL-Cipher: DHE-RSA-AES256-SHA Client-SSL-Warning: Peer certificate not verified Client-Transfer-Encoding: chunked Link: <css/vtext_style.css>; rel="stylesheet"; type="text/css" Set-Cookie: JSESSIONID=DE6C99EA2F3DD1D4DF31456B94F16C90.vz3; Path=/vzwcampaignadmin; Secure Title: Verizon Wireless - Campaign Administrator

    Read the article

  • File not found on RSACryptoServiceProvider, service account permissions?

    - by Ben Scheirman
    Our web service wraps around a third party library that contains the following code. We are using an Active Directory service account in the IIS 6 app pool (no interactive login abilities). Our service fails with the error “The system cannot find the file specified”. We’ve traced the error to the “RSACryptoServiceProvider provider = new RSACryptoServiceProvider();”. The third party assembly depends on a x509 file based certificate for its encryption process and the Service Account has Read / Write access to the keys folder. Additionally, the service account has Read, Write, Modify rights to “C:\Documents and Settings\All Users\Application Data\Microsoft\Crypto\RSA\MachineKeys”. Code: StringBuilder builder = new StringBuilder(publicKeyData); builder.Replace("-----BEGIN CERTIFICATE-----", ""); builder.Replace("-----END CERTIFICATE-----", ""); X509Certificate2 certificate = new X509Certificate2( Convert.FromBase64String(builder.ToString())); string xmlString = certificate.PublicKey.Key.ToXmlString(false); RSACryptoServiceProvider provider = new RSACryptoServiceProvider(); //BOOM CspKeyContainerInfo containerInfo = provider.CspKeyContainerInfo; provider.PersistKeyInCsp = false; provider.FromXmlString(xmlString); loadedKeys.Add(key, provider); provider2 = provider; We cracked open FileMon and noticed that there is a FILE NOT FOUND for that AppPool, followed by another SUCCESS for the same exact file. I'm out of my element here, anybody have an idea as to why we're seeing this?

    Read the article

  • RSA Decrypting a string in C# which was encrypted with openssl in php 5.3.2

    - by panny
    maybe someone can clear me up. I have been surfing on this a while now. I used openssl from console to create a root certificate for me (privatekey.pem, publickey.pem, mycert.pem, mycertprivatekey.pfx). See the end of this text on how. The problem is still to get a string encrypted on the PHP side to be decrypted on the C# side with RSACryptoServiceProvider. Any ideas? PHP side I used the publickey.pem to read it into php: $server_public_key = openssl_pkey_get_public(file_get_contents("C:\publickey.pem")); // rsa encrypt openssl_public_encrypt("123", $encrypted, $server_public_key); and the privatekey.pem to check if it works: openssl_private_decrypt($encrypted, $decrypted, openssl_get_privatekey(file_get_contents("C:\privatekey.pem"))); Coming to the conclusion, that encryption/decryption works fine on the php side with these openssl root certificate files. C# side In same manner I read the keys into a .net C# console program: X509Certificate2 myCert2 = new X509Certificate2(); RSACryptoServiceProvider rsa = new RSACryptoServiceProvider(); try { myCert2 = new X509Certificate2(@"C:\mycertprivatekey.pfx"); rsa = (RSACryptoServiceProvider)myCert2.PrivateKey; } catch (Exception e) { } string t = Convert.ToString(rsa.Decrypt(rsa.Encrypt(test, false), false)); coming to the point, that encryption/decryption works fine on the c# side with these openssl root certificate files. key generation on unix 1) openssl req -x509 -nodes -days 3650 -newkey rsa:1024 -keyout privatekey.pem -out mycert.pem 2) openssl rsa -in privatekey.pem -pubout -out publickey.pem 3) openssl pkcs12 -export -out mycertprivatekey.pfx -in mycert.pem -inkey privatekey.pem -name "my certificate"

    Read the article

  • Create a SSL certificate on Windows

    - by Ben Fransen
    Hi all, Since I'm very new to SSL certificates, and the creation and usage of them I figured maybe StackOverflow members can help me out. I'm from Holland, the common way of online payments is by implementing iDEAL. An online payment protocol supported by the major banks. I have to implement a 'professional' version. This includes creating a RSA private key. Based on that key I have to create a certificate and upload it to the webserver. I'm on a Windows machine and completely confused what to do. I took a look at the OpenSSL website, because the manual forwarded me to that website to get a SSL Toolkit. The manual provides two commands which have to be executed in order to create a RSA key and a certificate. The commands are: openssl genrsa -des3 –out priv.pem -passout pass:myPassword 1024 and openssl req -x509 -new -key priv.pem -passin pass:myPassword -days 3650 -out cert.cer Is there a way I can do this by a utility on a windows machine? I've downloaded PuTTy KeyGenerator. But I'm not sure what to do, I've created a key (SSH-2 RSA, whatever that is..) but how do I create a certificate with that key? Any help is much appreciated! Ben

    Read the article

  • Decrypting a string in C# which was encrypted with openssl in php 5.3.2

    - by panny
    maybe someone can clear me up. I have been surfing on this a while now. I used openssl from console to create a root certificate for me (privatekey.pem, publickey.pem, mycert.pem, mycertprivatekey.pfx). See the end of this text on how. The problem is still to get a string encrypted on the PHP side to be decrypted on the C# side with RSACryptoServiceProvider. Any ideas? PHP side I used the publickey.pem to read it into php: $server_public_key = openssl_pkey_get_public(file_get_contents("C:\publickey.pem")); // rsa encrypt openssl_public_encrypt("123", $encrypted, $server_public_key); and the privatekey.pem to check if it works: openssl_private_decrypt($encrypted, $decrypted, openssl_get_privatekey(file_get_contents("C:\privatekey.pem"))); Coming to the conclusion, that encryption/decryption works fine on the php side with these openssl root certificate files. C# side In same manner I read the keys into a .net C# console program: X509Certificate2 myCert2 = new X509Certificate2(); RSACryptoServiceProvider rsa = new RSACryptoServiceProvider(); try { myCert2 = new X509Certificate2(@"C:\mycertprivatekey.pfx"); rsa = (RSACryptoServiceProvider)myCert2.PrivateKey; } catch (Exception e) { } string t = Convert.ToString(rsa.Decrypt(rsa.Encrypt(test, false), false)); coming to the point, that encryption/decryption works fine on the c# side with these openssl root certificate files. key generation on unix 1) openssl req -x509 -nodes -days 3650 -newkey rsa:1024 -keyout privatekey.pem -out mycert.pem 2) openssl rsa -in privatekey.pem -pubout -out publickey.pem 3) openssl pkcs12 -export -out mycertprivatekey.pfx -in mycert.pem -inkey privatekey.pem -name "my certificate"

    Read the article

< Previous Page | 1 2 3 4 5 6  | Next Page >