Search Results

Search found 33250 results on 1330 pages for 'access rights'.

Page 50/1330 | < Previous Page | 46 47 48 49 50 51 52 53 54 55 56 57  | Next Page >

  • Intermittent access to Win7 Share

    - by Omega
    I ave a share on a Windows 7 machine that is sometimes accessible from Ubuntu and sometimes isn't. When I try to access it currently, I get the message: "Failed to mount Windows share", and nothing more. Gnome doesn't appear to want to provide me with any more detailed information. I've verified that the workgroup is set correctly and as noted in the title, sometimes the share DOES work. It seems like I can only access it once and then subsequent mounts are blocked. What is going on?! Thanks!

    Read the article

  • IP route ppp0 + eth0 access to outside network

    - by Vitor
    I need some help in define a route I have two connections one from eth0 and other a ppp0 (a 3G card) Not having the ppp0 connection active my route table is: Destination Gateway Genmask Flags Metric Ref Use Iface default DD-WRT 0.0.0.0 UG 100 0 0 eth0 192.168.1.0 * 255.255.255.0 U 0 0 0 eth0 I can access my webserver from an outside network through ethernet interface Than I have also my ppp0 3G connection active havig the following route table: D estination Gateway Genmask Flags Metric Ref Use Iface default 10.64.64.64 0.0.0.0 UG 0 0 0 ppp0 10.64.64.64 * 255.255.255.255 UH 0 0 0 ppp0 192.168.1.0 * 255.255.255.0 U 0 0 0 eth0 Now I only can access my webserver in outside networks through the IP of the 3G connection Note that my server is serving at 0.0.0.0 IP (to all interfaces) But I need to get access to webserver to both interfaces ethernet and 3G connection I only can have access to both connection in local network Any help to configure this network to have both interfaces with outside networks access is welcome Can anyone give me an example to configure this network with 2 gateways to give outside networks access One for IP 192.168.1.149 and other for the ppp0 IP 89.214.60.196 Tanks

    Read the article

  • DIY Door Lock Grants Access via RFID

    - by Jason Fitzpatrick
    If you’re looking to lighten the load on your pocket and banish the jingling of keys, this RFID-key hack makes your front door keycard accessible–and even supports groups and user privileges. Steve, a DIYer and Hack A Day reader, was looking for a solution to a simple problem: he wanted to easily give his friends access to his home without having to copy lots of keys and bulk up their key rings. Since all his friends already carried a Boston public transit RFID card the least intrusive solution was to hack his front door to support RFID cards. His Arduino-based solution can store up to 50 RFID card identifiers, supports group-based access, and thanks to a little laser cutting and stain the project enclosure blends in with the Victorian styling of his home’s facade. Hit up the link below to see his code–for a closer look at the actual enclosure check out this photo gallery. RFID Front Door Lock [via Hack A Day] HTG Explains: What is DNS? How To Switch Webmail Providers Without Losing All Your Email How To Force Windows Applications to Use a Specific CPU

    Read the article

  • Website Access...DNS, ISP, issue?

    - by sublet
    This isn't so much a code issue as it might be an issue with my ISP. For some reason when I visit a site very often, like one I manage or write stories on, it will just stop pulling data down after a while. It's very random when it happens, but probably happens once a week. If effects everyone who is accessing the site from this connection, and I can access other sites no problem. Also, if I go outside the office back home, which is right down the street, and access the site it is fine. I'm using Comcast in both locations. It's almost as if I have a limit on requests to each site and have hit my limit so it blocks the site for a while. Anybody have any clue what this might be?

    Read the article

  • How to install Awesome WM without root access?

    - by ssice
    I want to install the Awesome window manager. In the environment where I want to configure it I don't have root access. I do have a machine were I can be root (I use for this a virtual machine in my laptop). I have tried the following: $ sudo apt-get install awesome The following packages are about to be installed: awesome libev3 libid3tag0 libimlib2 liblua5.1-0 libxcb-icccm1 libxcb-image0 libxcb-keysyms1 libxcb-property1 libxcb-randr0 libxcb-xinerama0 libxcb-xtest0 libxdg-basedir1 menu rlwrap Do you want to continue [Y/n]? n I do now have the list of dependencies for awesome, so I downloaded them all. For that, I did the following. $ pkgs="awesome libev3 libid3tag0 libimlib2 liblua5.1-0 libxcb-icccm1 libxcb-image0 libxcb-keysyms1 libxcb-property1 libxcb-randr0 libxcb-xinerama0 libxcb-xtest0 libxdg-basedir1 menu rlwrap" # this is just for not writing it all ;) $ sudo apt-get install --download-only $pkgs .... $ mkdir -p /tmp/x_debs $ for pkg in $pkgs; do cp /var/cache/apt/archives/$pkg* /tmp/x_debs/; done [ copies all *.deb from my dependencies to /tmp/x_debs ] Now, I want to install the dependencies. For that, I setup a fake dpkg install in my home folder: $ mkdir $HOME/root $ mkdir -p $HOME/root/var/lib/dpkg/{triggers,updates} $ touch $HOME/root/var/lib/dpkg/{available,status} Now I tried to install with dpkg, but I could not: $ dpkg --force-not-root --root=$HOME/root --recursive -i /tmp/x_debs It failed while trying to set permissions for the packages and running chroot. As I do have root access in this machine, I ran it with privileges: $ sudo dpkg --root=$HOME/root --recursive -i /tmp/x_debs Then I had a lot of stuff (i.e., everything: dependencies and the own WM) installed inside $HOME/root. Particularly, xcb-* libraries were installed in $HOME/root/usr/lib and the awesome binary in $HOME/root/usr/bin/awesome. If I try to execute awesome as is I get as an error that libraries could not be loaded. That's normal, as they are not in /usr/lib nor in /lib. So I ran export LD_LIBRARY_PATH=$HOME/root/usr/lib:$HOME/root/lib:${LD_LIBRARY_PATH} and awesome would try to load. However, I could not make gdm to run awesome within gnome or replacing it. I did it this way so I can copy everything in my $HOME/root folder, paste it in the other machine and have it running. Is there any other way (to have less wasted space maybe..) to do this? How can I tell gdm to exec awesome without root access?

    Read the article

  • OSX 10.6 Give Apache2 read&write access to mounted windows share

    - by JohEngstrom
    On Mac OS X Snow Leopard I'm trying to give the apache2 user _www full rights to a mounted hidden windows server share. I've used Connect to Server with smb://servername/share$ and saved the username/password in the keychain. The domain username used for the mount got full rights to the share on the windows server. It all works this far. I can browse and edit the files in the share from the Mac. However I can't find a way to give the apache2 user _www rights to write to the mounted share. I have a perl script that is supposed to create a file in the mounted folder but only get permission denied. I've tried all kinds of chmod and chown but it doesn't change the permissions of the share. Does anyone know how this can be done please?

    Read the article

  • Access local email stored on worstation on laptop on lan

    - by crafter
    I have the following scenario with my email : I am using Evolution as my primary email client on my workstation. The evolution mail is downloaded from my mail servers using POP, then deleted from the server. When I am mobile, I access my email on my email server using webmail. My laptop is my primary computer thesedays. The workstation is hardly used. When I am mobile, I am restricted to new email that has not been downloaded onto the workstation I am now looking for a way to access my email from my workstation on my laptop, amlost as if my workstation is my second level email server/ I tried evolution on X display but attachments will browse on my workstation (not ideal as most docs are on my laptop). I am open to changing mail client or installing a service on my workstation. What would be the best way to address this requirement?

    Read the article

  • App Fabric Service Bus and Access Control Pricing

    - by kaleidoscope
    The Service Bus costs $3.99 per Connection-month on a consumption basis for individually provisioned connections. Data transfers charges would also apply. Or, if you are able to forecast your needs ahead of time, you can purchase “Packs” of Connections. For example: $9.95 for a pack of 5 Connections, $49.75 for a pack of 25, $199.00 for a pack of 100, or $995 for a pack of 500, plus data transfer charges. Connection Packs represent an effective rate of $1.99 per Connection-month. Access Control will be priced at $1.99 per 100,000 Transactions, which includes token requests and management operations, plus associated data transfer. Typically, Service Bus developers depend on Access Control to secure their Connections. More Information: http://azurefeeds.com/post/865/Announcing_Windows_Azure_platform_commercial_offer_availability_and_updated_AppFabric_pricing.aspx   Amit, S

    Read the article

  • How to access shared folders from file editors?

    - by Marchosius
    I am running a xampp server on one of my other computers, and when using the brows functionality from text editors like gedit, bluefish and Eclipse/Aptana studio I can access the shares I made for the sites running on the server. Even when I right click-edit with-application with the the file browser it does not open the file in the editor. How can get this to work without having to copy the file over from the share then edit and then upload again after I am done? Similar issue when trying to upload a file to hosting server direct from the file server I have with filezilla. with this I also need to copy the file over to my pc and then from there upload to the hosting server with filezilla. EDIT: For eclipse I found a build in functionality to do this. (new-remote system connection-Enter the access details) Nothing yet on FileZilla Hope my Question is clear

    Read the article

  • BSNL Routers: Default Username and Password To Access Admin Interface

    - by Gopinath
    Problem You have BSNL broadband set up at home and everything is working fine. But one fine day you something went wrong or you would like to change the properties of your BSNL modem by logging in to the admin user interface of your modem. What is the default username and password to login to BSNL Router user interface? Solution Here are the default username, password to access your BSNL router admin interface URL: http://192.168.1.1/ Username: admin Password: admin Note: The above username and password are the default ones that works with all the BSNL routers until unless someone has changed them. This article titled,BSNL Routers: Default Username and Password To Access Admin Interface, was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

    Read the article

  • MacOSX VirtualHost: "You don't have permission to access / on this server" error

    - by David Casillas
    The Apache instalation of MacOSX is running Ok. I have tried to create a VirtualHost called test.local, but as soon as I uncomment from /private/etc/apache2/httpd.conf the line Include /private/etc/apache2/extra/httpd-vhosts.conf , and try to access test.local virtualhost I get an error "You don't have permission to access / on this server". The VirtualHost configuration in /private/etc/apache2/extra/httpd-vhosts.conf is: <VirtualHost *:80> ServerName test.local DocumentRoot "/Users/username/Sites/Test/public" <Directory "/Users/username/Sites/Test/public"> Options Indexes FollowSymLinks Includes AllowOverride All Order allow,deny Allow from all </Directory> </VirtualHost> I have also include the VirtualHost in hosts file: 127.0.0.1 test.local

    Read the article

  • Migrate reports from MS Access to OOo Base

    - by John Gardeniers
    I'm currently looking at upgrading our office machines from Office XP to Office 2010. For most users the standard edition is fine but just a few of us use Access. There are only a couple of standalone Access databases but the program is used fairly extensively (mostly by myself) as a front end to MySQL. As the cost different between standard and pro versions of Office 2010 is about $170 (AUD) I'm looking at possible alternatives to Access. I'm no huge fan of Open Office but could be convinced to use it if I can find a way to migrate the many reports we currently have in Access. The data is not a problem. So far I've found nothing to suggest this is even possible/practical but perhaps someone here knows otherwise. I'm also open to suggestions for other alternatives to Access but it must be able to produce flexible reports easily. That is the one real strength of Access in my view. Because of its subjective nature I'm making this community wiki.

    Read the article

  • Can't access local network when connect to pppoe

    - by shantanu
    I am using DSL(PPPOE) connection in ubuntu. It has two part (I am not sure), when I just connect the cable, system automatically get an IP address started with 172.x.x.x(DHCP). When I connect using username/password (PPPOE) I get another IP started with 10.x.x.x and can access internet but can't access some local IP (in my LAN), which are some FTP, media server provided by my ISP. I complained about that to my ISP but they reply Windows is working It's true, Windows 7 is working fine with this settings. I can access internet and local server at the same time. Also I use a WIFI router (TP-link TL-WR340G/TL-WR340GD) which result the same problem. So when I connect cable directly to system and use Windows 7 than everything is fine. Otherwise problem. Similar problem discussed here. Edit before connect. route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 172.100.0.1 0.0.0.0 UG 0 0 0 eth0 172.100.0.0 0.0.0.0 255.255.0.0 U 1 0 0 eth0 after connect. Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 10.12.44.91 0.0.0.0 UG 0 0 0 ppp0 10.12.44.91 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 ifconfig after connect eth0 Link encap:Ethernet HWaddr 74:d0:2b:d5:b3:6c inet6 addr: fe80::76d0:2bff:fed5:b36c/64 Scope:Link inet6 addr: 2002:ac64:154:c:76d0:2bff:fed5:b36c/64 Scope:Global inet6 addr: fec0::c:76d0:2bff:fed5:b36c/64 Scope:Site UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:26582 errors:0 dropped:18 overruns:0 frame:0 TX packets:2340 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2542063 (2.5 MB) TX bytes:244938 (244.9 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:4118 errors:0 dropped:0 overruns:0 frame:0 TX packets:4118 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:336759 (336.7 KB) TX bytes:336759 (336.7 KB) ppp0 Link encap:Point-to-Point Protocol inet addr:10.12.44.95 P-t-P:10.12.44.91 Mask:255.255.255.255 inet6 addr: fe80::a536:c7ae:e079:d88d/10 Scope:Link UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1492 Metric:1 RX packets:689 errors:0 dropped:0 overruns:0 frame:0 TX packets:744 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:3 RX bytes:385746 (385.7 KB) TX bytes:75296 (75.2 KB) I used network manager to create network(DSL connection)

    Read the article

  • Can connect to shared folder on Windows Server 2012, but access denied when accessing

    - by Cylindric
    I have a Windows Server 2012 (non-domain) with a folder that's shared out as TestShare. The share permissions are Everyone has full access, and there is a local user TestUser that has full access to the actual folder. On GuestServer I can connect and/or map a drive to \HostServer\TestShare, specifying the username and password for TestUser. NTFS permissions: Share permissions Effective Access Report The problem is that when I try to access the folder, I get an "access denied" message. On the host server I can see the user connected to the share in the Sessions manager, so the password is correct and being recognised. If I use an incorrect password I don't get the "completed successfully" message, nor the 'open session'. What else can be blocking access to the shared files, when the share seems to be set, and the folder permissions seem to be set, and the connection seems to be okay? The network is recognised as "public", and the relevant firewall rules seem to be enabled - even disabling the firewall doesn't help.

    Read the article

  • Cisco PIX 515 doesn't seem to be passing traffic through according to static route

    - by Liquidkristal
    Ok, so I am having a spot of bother with a Cisco PIX515, I have posted the current running config below, now I am no cisco expert by any means although I can do basic stuff with them, now I am having trouble with traffic sent from the outside to address: 10.75.32.25 it just doesn't appear to be going anywhere. Now this firewall is deep inside a private network, with an upstream firewall that we don't manage. I have spoken to the people that look after that firewall and they say they they have traffic routing to 10.75.32.21 and 10.75.32.25 and thats it (although there is a website that runs from the server 172.16.102.5 which (if my understanding is correct) gets traffic via 10.75.32.23. Any ideas would be greatly appreciated as to me it should all just work, but its not (obviously if the config is all correct then there could be a problem with the web server that we are trying to access on 10.75.32.25, although the users say that they can get to it internally (172.16.102.8) which is even more confusing) PIX Version 6.3(3) interface ethernet0 auto interface ethernet1 auto interface ethernet2 auto nameif ethernet0 outside security0 nameif ethernet1 inside security100 nameif ethernet2 academic security50 fixup protocol dns maximum-length 512 fixup protocol ftp 21 fixup protocol h323 h225 1720 fixup protocol h323 ras 1718-1719 fixup protocol http 80 fixup protocol rsh 514 fixup protocol rtsp 554 fixup protocol sip 5060 fixup protocol sip udp 5060 fixup protocol skinny 2000 fixup protocol smtp 25 fixup protocol sqlnet 1521 fixup protocol tftp 69 names name 195.157.180.168 outsideNET name 195.157.180.170 globalNAT name 195.157.180.174 gateway name 195.157.180.173 Mail-Global name 172.30.31.240 Mail-Local name 10.75.32.20 outsideIF name 82.219.210.17 frogman1 name 212.69.230.79 frogman2 name 78.105.118.9 frogman3 name 172.16.0.0 acadNET name 172.16.100.254 acadIF access-list acl_outside permit icmp any any echo-reply access-list acl_outside permit icmp any any unreachable access-list acl_outside permit icmp any any time-exceeded access-list acl_outside permit tcp any host 10.75.32.22 eq smtp access-list acl_outside permit tcp any host 10.75.32.22 eq 8383 access-list acl_outside permit tcp any host 10.75.32.22 eq 8385 access-list acl_outside permit tcp any host 10.75.32.22 eq 8484 access-list acl_outside permit tcp any host 10.75.32.22 eq 8485 access-list acl_outside permit ip any host 10.75.32.30 access-list acl_outside permit tcp any host 10.75.32.25 eq https access-list acl_outside permit tcp any host 10.75.32.25 eq www access-list acl_outside permit tcp any host 10.75.32.23 eq www access-list acl_outside permit tcp any host 10.75.32.23 eq https access-list acl_outside permit tcp host frogman1 host 10.75.32.23 eq ssh access-list acl_outside permit tcp host frogman2 host 10.75.32.23 eq ssh access-list acl_outside permit tcp host frogman3 host 10.75.32.23 eq ssh access-list acl_outside permit tcp any host 10.75.32.23 eq 2001 access-list acl_outside permit tcp host frogman1 host 10.75.32.24 eq 8441 access-list acl_outside permit tcp host frogman2 host 10.75.32.24 eq 8441 access-list acl_outside permit tcp host frogman3 host 10.75.32.24 eq 8441 access-list acl_outside permit tcp host frogman1 host 10.75.32.24 eq 8442 access-list acl_outside permit tcp host frogman2 host 10.75.32.24 eq 8442 access-list acl_outside permit tcp host frogman3 host 10.75.32.24 eq 8442 access-list acl_outside permit tcp host frogman1 host 10.75.32.24 eq 8443 access-list acl_outside permit tcp host frogman2 host 10.75.32.24 eq 8443 access-list acl_outside permit tcp host frogman3 host 10.75.32.24 eq 8443 access-list acl_outside permit tcp any host 10.75.32.23 eq smtp access-list acl_outside permit tcp any host 10.75.32.23 eq ssh access-list acl_outside permit tcp any host 10.75.32.24 eq ssh access-list acl_acad permit icmp any any echo-reply access-list acl_acad permit icmp any any unreachable access-list acl_acad permit icmp any any time-exceeded access-list acl_acad permit tcp any 10.0.0.0 255.0.0.0 eq www access-list acl_acad deny tcp any any eq www access-list acl_acad permit tcp any 10.0.0.0 255.0.0.0 eq https access-list acl_acad permit tcp any 10.0.0.0 255.0.0.0 eq 8080 access-list acl_acad permit tcp host 172.16.102.5 host 10.64.1.115 eq smtp pager lines 24 logging console debugging mtu outside 1500 mtu inside 1500 mtu academic 1500 ip address outside outsideIF 255.255.252.0 no ip address inside ip address academic acadIF 255.255.0.0 ip audit info action alarm ip audit attack action alarm pdm history enable arp timeout 14400 global (outside) 1 10.75.32.21 nat (academic) 1 acadNET 255.255.0.0 0 0 static (academic,outside) 10.75.32.22 Mail-Local netmask 255.255.255.255 0 0 static (academic,outside) 10.75.32.30 172.30.30.36 netmask 255.255.255.255 0 0 static (academic,outside) 10.75.32.23 172.16.102.5 netmask 255.255.255.255 0 0 static (academic,outside) 10.75.32.24 172.16.102.6 netmask 255.255.255.255 0 0 static (academic,outside) 10.75.32.25 172.16.102.8 netmask 255.255.255.255 0 0 access-group acl_outside in interface outside access-group acl_acad in interface academic route outside 0.0.0.0 0.0.0.0 10.75.32.1 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00 timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00 timeout uauth 0:05:00 absolute aaa-server TACACS+ protocol tacacs+ aaa-server RADIUS protocol radius aaa-server LOCAL protocol local snmp-server host outside 172.31.10.153 snmp-server host outside 172.31.10.154 snmp-server host outside 172.31.10.155 no snmp-server location no snmp-server contact snmp-server community CPQ_HHS no snmp-server enable traps floodguard enable telnet 172.30.31.0 255.255.255.0 academic telnet timeout 5 ssh timeout 5 console timeout 0 terminal width 120 Cryptochecksum:hi2u : end PIX515#

    Read the article

  • Access Control Management Tool ACM.exe

    - by kaleidoscope
    The Access Control Management Tool (Acm.exe) is a command-line tool you can use to perform management operations (CREATE, UPDATE, GET, GET ALL, and DELETE) on the AppFabric Access Control entities (scopes, issuers, token policies, and rules). Basic Syntax The command line for Acm.exe follows the basic pattern of verb-noun. For example: acm.exe <command> <resource> [-option:<option value>] This tool will automatically generate random keys, which helps ensure that they can't easily be guessed by an attacker. Note that ACM.EXE is a thin wrapper around a REST Web Service (the AC management service). That helps to remember the commands it accepts, which are the typical resource management commands for a REST service: · Get(All) · Create · Update · Delete ACM.EXE.config file can be used to configure Host, Service and the Management key for a Service Namespace. Geeta, G

    Read the article

  • Installing MoinMoin -wiki to my user directory on a server with no root access

    - by deiga
    Hello all, I've been trying to install MoinMoin -wiki on this webserver, where I have no root access. The server doesn't support wsgi, but it does support cgi/fcgi/etc. I've scoured google for a simple guide on how to accomplish this, but the only guides I found were from the year 2004 or so. Other guides always assumed that one has root access. So can anyone link a good tutorial for my question or just help me out here? Your help is appreciated :) P.S. Sorry if this is the wrong stack -page

    Read the article

  • Get access to files on old HD installation and remove system files

    - by Blake
    I have been fooling with ubuntu for only a year or so. Added SSD installed ubuntu(12.04 64bit) connected old drive with ubuntu on it. everything seems to work well, except for access to some files. I would like to do two things: 1) move the swap file from the SSD to the partition on the HD. 2) remove ubuntu system files and gain full access to my other files. I can still remove the SSD and run ubuntu from the HD, so if I am approaching this incorrectly please advise. Thanks in advance Blake

    Read the article

  • How to Access Boot Options 12.04 Live USB

    - by Ryan Kampmeier
    I'm attempting to install 12.04 on my computer but booting from my USB drive results in a blank screen. This has happened since 10.04 and has always been fixed by putting nomodeset in the boot command, but now I can't access the boot options with F6 for some reason. How can I access the boot options? I booted into the live image on a different computer and it worked fine. I'm sure it's because of my Nvidia graphics. When I boot into the live image it shows a small gray box in the lower left corner of the screen and that's it. I can't edit the boot options or do anything else. Thanks in advance.

    Read the article

  • No client internet access when setting up these iptables rules

    - by Siriss
    I have read many other posts but cannot figure this out. eth0 is my external connected to a Comcast modem. The server has internet access with no issues. eth1 is internal and running DHCP for the clients. I have DHCP working just fine, all my clients can get an IP and ping the server but they cannot access the internet. I am using ISC-DHCP-SERVER and have set /etc/default/isc-dhcp-server to INTERFACE="eht1" Here is my dhcpd.conf file located in /etc/dhcp/dhcpd.conf ddns-update-style interim; ignore client-updates; subnet 10.0.10.0 netmask 255.255.255.0 { range 10.0.10.10 10.0.10.200; option routers 10.0.10.2; option subnet-mask 255.255.255.0; option domain-name-servers 208.67.222.222, 208.67.220.220; #OpenDNS # option domain-name "example.com"; default-lease-time 21600; max-lease-time 43200; authoritative; } I have made the *net.ipv4.ip_forward=1* change in /etc/sysctl.conf here is my interfaces file: auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp iface eth1 inet static address 10.0.10.2 netmask 255.255.255.0 network 10.0.10.0 auto eth1 And finally- here is my iptables.conf file: # Firewall configuration written by system-config-firewall # Manual customization of this file is not recommended. *nat :PREROUTING ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] -A POSTROUTING -s 10.0.10.0/24 -o eth0 -j MASQUERADE #-A PREROUTING -i eth0 -p tcp --dport 59668 -j DNAT --to-destination 10.0.10.2:59668 COMMIT *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT -A INPUT -p icmp -j ACCEPT -A INPUT -i lo -j ACCEPT -A INPUT -i eth1 -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp --dport 80 -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp --dport 443 -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp --dport 53 -j ACCEPT -A INPUT -m state --state NEW -m udp -p udp --dport 53 -j ACCEPT -A FORWARD -s 10.0.10.0/24 -o eth0 -j ACCEPT -A FORWARD -d 10.0.10.0/24 -m state --state ESTABLISHED,RELATED -i eth0 -j ACCEPT -A FORWARD -p icmp -j ACCEPT -A FORWARD -i lo -j ACCEPT -A FORWARD -i eth1 -j ACCEPT #-A FORWARD -i eth0 -m state --state NEW -m tcp -p tcp -d 10.0.10.2 --dport 59668 -j ACCEPT -A INPUT -j REJECT --reject-with icmp-host-prohibited -A FORWARD -j REJECT --reject-with icmp-host-prohibited COMMIT I am completely stuck. I cannot figure out why the clients cannot access the internet. Am I missing a service? Is a service not running? Any help would be greatly appreciated. I tried to be as thorough as possible but please let me know if I have missed something. Thank you!

    Read the article

  • Dual Boot: access Mac OS HD folders from Ubuntu

    - by dresde
    I did it!!! I'm right now writting from Ubuntu 11.10 installed in my MacBook Pro using Dual Boot!!! THe only thing is, how can I now access my Mac folders? From Ubuntu if I try to open Music, Documents or any of those folders related to the Mac user I get the following: [The folder contents could not be displayed. You do not have the permissions necessary to view the contents of "Music"] I can access them if I run Nautilus from root (gksudo nautilus), but I would like to just be able to browse those folders. Thanks!

    Read the article

< Previous Page | 46 47 48 49 50 51 52 53 54 55 56 57  | Next Page >