Search Results

Search found 1270 results on 51 pages for 'amd v'.

Page 50/51 | < Previous Page | 46 47 48 49 50 51  | Next Page >

• How to resolve Unmet dependencies error?

  - by dandelion

  Using my new install of Ubuntu I haven't been able to download anything from the software center except the maryo game without the following error: The following packages have unmet dependencies: vlc: Depends: vlc-nox (= 1.1.12-2~oneiric1) but 1.1.12-2~oneiric1 is to be installed Depends: libaa1 (>= 1.4p5) but 1.4p5-38build1 is to be installed Depends: libavcodec-extra-53 (>= 4:0.7-1) but 4:0.7.3ubuntu0.11.10.1 is to be installed Depends: libavutil-extra-51 (>= 4:0.7-1) but 4:0.7.3ubuntu0.11.10.1 is to be installed Depends: libc6 (>= 2.8) but 2.13-20ubuntu5.1 is to be installed Depends: libfreetype6 (>= 2.2.1) but 2.4.4-2ubuntu1.1 is to be installed Depends: libgcc1 (>= 1:4.1.1) but 1:4.6.1-9ubuntu3 is to be installed Depends: libqtcore4 (>= 4:4.7.0~beta1) but 4:4.7.4-0ubuntu8.1 is to be installed Depends: libqtgui4 (>= 4:4.5.3) but 4:4.7.4-0ubuntu8.1 is to be installed Depends: libsdl-image1.2 (>= 1.2.10) but 1.2.10-2.1 is to be installed Depends: libsdl1.2debian (>= 1.2.10-1) but 1.2.14-6.1ubuntu4 is to be installed Depends: libstdc++6 (>= 4.6) but 4.6.1-9ubuntu3 is to be installed Depends: libva-x11-1 (> 1.0.12~) but it is not going to be installed Depends: libva1 (> 1.0.12~) but it is not going to be installed Depends: libxcb-randr0 (>= 1.1) but it is not going to be installed Depends: libxcb-xv0 (>= 1.2) but it is not going to be installed Depends: zlib1g (>= 1:1.2.3.3.dfsg) but 1:1.2.3.4.dfsg-3ubuntu3 is to be installed My system specs are version 11.10 64 bit. ge-g41m-es2l mother board amd 5770 video card wdc green 500 gig hard drive I have recently changed the motherboard, but otherwise have not changed my computer from when I used to be running the same version of Ubuntu. edit still unable to download output of sudo apt-get update output of sudo apt-get update ~$ sudo apt-get update Ign http://extras.ubuntu.com oneiric InRelease Ign http://security.ubuntu.com oneiric-security InRelease Ign http://archive.canonical.com oneiric InRelease Ign http://ppa.launchpad.net oneiric InRelease Ign http://us.archive.ubuntu.com oneiric InRelease Ign http://us.archive.ubuntu.com oneiric-updates InRelease Ign http://us.archive.ubuntu.com oneiric-backports InRelease Hit http://extras.ubuntu.com oneiric Release.gpg Hit http://archive.canonical.com oneiric Release.gpg Hit http://security.ubuntu.com oneiric-security Release.gpg Hit http://ppa.launchpad.net oneiric Release.gpg Ign http://us.archive.ubuntu.com oneiric-proposed InRelease Hit http://us.archive.ubuntu.com oneiric Release.gpg Hit http://extras.ubuntu.com oneiric Release Hit http://archive.canonical.com oneiric Release Hit http://security.ubuntu.com oneiric-security Release Hit http://ppa.launchpad.net oneiric Release Hit http://us.archive.ubuntu.com oneiric-updates Release.gpg Hit http://us.archive.ubuntu.com oneiric-backports Release.gpg Hit http://extras.ubuntu.com oneiric/main Sources Hit http://archive.canonical.com oneiric/partner i386 Packages Hit http://security.ubuntu.com oneiric-security/main Sources Hit http://ppa.launchpad.net oneiric/main Sources Hit http://us.archive.ubuntu.com oneiric-proposed Release.gpg Hit http://extras.ubuntu.com oneiric/main i386 Packages Ign http://extras.ubuntu.com oneiric/main TranslationIndex Hit http://ppa.launchpad.net oneiric/main i386 Packages Ign http://ppa.launchpad.net oneiric/main TranslationIndex Ign http://archive.canonical.com oneiric/partner TranslationIndex Hit http://security.ubuntu.com oneiric-security/restricted Sources Hit http://security.ubuntu.com oneiric-security/universe Sources Hit http://security.ubuntu.com oneiric-security/multiverse Sources Hit http://security.ubuntu.com oneiric-security/main i386 Packages Hit http://security.ubuntu.com oneiric-security/restricted i386 Packages Hit http://us.archive.ubuntu.com oneiric Release Hit http://us.archive.ubuntu.com oneiric-updates Release Hit http://security.ubuntu.com oneiric-security/universe i386 Packages Hit http://security.ubuntu.com oneiric-security/multiverse i386 Packages Hit http://security.ubuntu.com oneiric-security/main TranslationIndex Hit http://security.ubuntu.com oneiric-security/multiverse TranslationIndex Hit http://security.ubuntu.com oneiric-security/restricted TranslationIndex Hit http://security.ubuntu.com oneiric-security/universe TranslationIndex Hit http://us.archive.ubuntu.com oneiric-backports Release Hit http://security.ubuntu.com oneiric-security/main Translation-en Hit http://security.ubuntu.com oneiric-security/multiverse Translation-en Hit http://us.archive.ubuntu.com oneiric-proposed Release Hit http://us.archive.ubuntu.com oneiric/main Sources Hit http://us.archive.ubuntu.com oneiric/restricted Sources Hit http://us.archive.ubuntu.com oneiric/universe Sources Hit http://us.archive.ubuntu.com oneiric/multiverse Sources Hit http://security.ubuntu.com oneiric-security/restricted Translation-en Hit http://us.archive.ubuntu.com oneiric/restricted i386 Packages Hit http://us.archive.ubuntu.com oneiric/universe i386 Packages Hit http://us.archive.ubuntu.com oneiric/multiverse i386 Packages Hit http://us.archive.ubuntu.com oneiric/main TranslationIndex Hit http://us.archive.ubuntu.com oneiric/multiverse TranslationIndex Hit http://us.archive.ubuntu.com oneiric/restricted TranslationIndex Hit http://us.archive.ubuntu.com oneiric/universe TranslationIndex Hit http://us.archive.ubuntu.com oneiric-updates/main Sources Hit http://us.archive.ubuntu.com oneiric-updates/restricted Sources Hit http://security.ubuntu.com oneiric-security/universe Translation-en Hit http://us.archive.ubuntu.com oneiric-updates/universe Sources Hit http://us.archive.ubuntu.com oneiric-updates/multiverse Sources Hit http://us.archive.ubuntu.com oneiric-updates/main i386 Packages Hit http://us.archive.ubuntu.com oneiric-updates/restricted i386 Packages Hit http://us.archive.ubuntu.com oneiric-updates/universe i386 Packages Hit http://us.archive.ubuntu.com oneiric-updates/multiverse i386 Packages Hit http://us.archive.ubuntu.com oneiric-updates/main TranslationIndex Hit http://us.archive.ubuntu.com oneiric-updates/multiverse TranslationIndex Hit http://us.archive.ubuntu.com oneiric-updates/restricted TranslationIndex Hit http://us.archive.ubuntu.com oneiric-updates/universe TranslationIndex Hit http://us.archive.ubuntu.com oneiric-backports/main Sources Hit http://us.archive.ubuntu.com oneiric-backports/restricted Sources Hit http://us.archive.ubuntu.com oneiric-backports/universe Sources Hit http://us.archive.ubuntu.com oneiric-backports/multiverse Sources Hit http://us.archive.ubuntu.com oneiric-backports/main i386 Packages Hit http://us.archive.ubuntu.com oneiric-backports/restricted i386 Packages Hit http://us.archive.ubuntu.com oneiric-backports/universe i386 Packages Hit http://us.archive.ubuntu.com oneiric-backports/multiverse i386 Packages Hit http://us.archive.ubuntu.com oneiric-backports/main TranslationIndex Hit http://us.archive.ubuntu.com oneiric-backports/multiverse TranslationIndex Hit http://us.archive.ubuntu.com oneiric-backports/restricted TranslationIndex Hit http://us.archive.ubuntu.com oneiric-backports/universe TranslationIndex Ign http://extras.ubuntu.com oneiric/main Translation-en_US Ign http://ppa.launchpad.net oneiric/main Translation-en_US Hit http://us.archive.ubuntu.com oneiric-proposed/restricted i386 Packages Hit http://us.archive.ubuntu.com oneiric-proposed/main i386 Packages Hit http://us.archive.ubuntu.com oneiric-proposed/multiverse i386 Packages Hit http://us.archive.ubuntu.com oneiric-proposed/universe i386 Packages Hit http://us.archive.ubuntu.com oneiric-proposed/main TranslationIndex Hit http://us.archive.ubuntu.com oneiric-proposed/multiverse TranslationIndex Hit http://us.archive.ubuntu.com oneiric-proposed/restricted TranslationIndex Hit http://us.archive.ubuntu.com oneiric-proposed/universe TranslationIndex Ign http://archive.canonical.com oneiric/partner Translation-en_US Ign http://extras.ubuntu.com oneiric/main Translation-en Ign http://ppa.launchpad.net oneiric/main Translation-en Ign http://archive.canonical.com oneiric/partner Translation-en Get:1 http://us.archive.ubuntu.com oneiric/main i386 Packages [1,583 kB] Hit http://us.archive.ubuntu.com oneiric/main Translation-en Hit http://us.archive.ubuntu.com oneiric/multiverse Translation-en Hit http://us.archive.ubuntu.com oneiric/restricted Translation-en Hit http://us.archive.ubuntu.com oneiric/universe Translation-en Hit http://us.archive.ubuntu.com oneiric-updates/main Translation-en Hit http://us.archive.ubuntu.com oneiric-updates/multiverse Translation-en Hit http://us.archive.ubuntu.com oneiric-updates/restricted Translation-en Hit http://us.archive.ubuntu.com oneiric-updates/universe Translation-en Hit http://us.archive.ubuntu.com oneiric-backports/main Translation-en Hit http://us.archive.ubuntu.com oneiric-backports/multiverse Translation-en Hit http://us.archive.ubuntu.com oneiric-backports/restricted Translation-en Hit http://us.archive.ubuntu.com oneiric-backports/universe Translation-en Hit http://us.archive.ubuntu.com oneiric-proposed/main Translation-en Hit http://us.archive.ubuntu.com oneiric-proposed/multiverse Translation-en Hit http://us.archive.ubuntu.com oneiric-proposed/restricted Translation-en Hit http://us.archive.ubuntu.com oneiric-proposed/universe Translation-en Err http://us.archive.ubuntu.com oneiric/main i386 Packages 404 Not Found [IP: 91.189.92.179 80] Fetched 1 B in 2s (0 B/s) W: Failed to fetch http://us.archive.ubuntu.com/ubuntu/dists/oneiric/main/binary-i386/Packages 404 Not Found [IP: 91.189.92.179 80] E: Some index files failed to download. They have been ignored, or old ones used instead.

  Read the article

• Fan running continously on HP Pavillion G6 notebook with 12.04.1 LTS, help please?

  - by Ankit

  Fan is running continously on my HP Pavillion G6 notebook with 12.04.1 LTS. My system specifications are:- Ram: 6Gb Graphics Card:- 1 GB (AMD Raedon 64XX). HDD: 540 GB. Please find a list of ACPI errors logs from dmesg as follows:- buffer@ankit:~$ dmesg | grep ACPI -i [ 0.000000] BIOS-e820: 000000009cebf000 - 000000009cfbf000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000009cfbf000 - 000000009cfff000 (ACPI data) [ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 HPQOEM) [ 0.000000] ACPI: XSDT 000000009cffe120 00084 (v01 HPQOEM SLIC-MPC 00000001 01000013) [ 0.000000] ACPI: FACP 000000009cffc000 000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: DSDT 000000009cfec000 0C132 (v01 HP 1670 00000000 MSFT 01000013) [ 0.000000] ACPI: FACS 000000009cf6c000 00040 [ 0.000000] ACPI: ASF! 000000009cffd000 000A5 (v32 HP 1670 00000001 MSFT 01000013) [ 0.000000] ACPI: HPET 000000009cffb000 00038 (v01 HP 1670 00000001 MSFT 01000013) [ 0.000000] ACPI: APIC 000000009cffa000 0008C (v02 HP 1670 00000001 MSFT 01000013) [ 0.000000] ACPI: MCFG 000000009cff9000 0003C (v01 HP 1670 00000001 MSFT 01000013) [ 0.000000] ACPI: SLIC 000000009cfeb000 00176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: SSDT 000000009cfea000 00D52 (v01 HP 1670 00001000 MSFT 01000013) [ 0.000000] ACPI: BOOT 000000009cfe8000 00028 (v01 HP 1670 00000001 MSFT 01000013) [ 0.000000] ACPI: ASPT 000000009cfe5000 00034 (v07 HP 1670 00000001 MSFT 01000013) [ 0.000000] ACPI: SSDT 000000009cfe4000 00780 (v01 HP 1670 00003000 INTL 20100121) [ 0.000000] ACPI: SSDT 000000009cfe3000 00996 (v01 HP 1670 00003000 INTL 20100121) [ 0.000000] ACPI: SSDT 000000009cfdd000 0219F (v01 HP 1670 00001000 INTL 20100121) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.005902] ACPI: Core revision 20110623 [ 0.536006] PM: Registering ACPI NVS region at 9cebf000 (1048576 bytes) [ 0.538423] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.538429] ACPI: bus type pci registered [ 0.656088] ACPI: Added _OSI(Module Device) [ 0.656094] ACPI: Added _OSI(Processor Device) [ 0.656098] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.656103] ACPI: Added _OSI(Processor Aggregator Device) [ 0.660335] ACPI: EC: Look up EC in DSDT [ 0.664416] ACPI: Executed 1 blocks of module-level executable AML code [ 0.728303] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.729536] ACPI: SSDT 000000009ce70798 00727 (v01 PmRef Cpu0Cst 00003001 INTL 20100121) [ 0.730622] ACPI: Dynamic OEM Table Load: [ 0.730630] ACPI: SSDT (null) 00727 (v01 PmRef Cpu0Cst 00003001 INTL 20100121) [ 0.760829] ACPI: SSDT 000000009ce71a98 00303 (v01 PmRef ApIst 00003000 INTL 20100121) [ 0.761992] ACPI: Dynamic OEM Table Load: [ 0.761998] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20100121) [ 0.792451] ACPI: SSDT 000000009ce6fd98 00119 (v01 PmRef ApCst 00003000 INTL 20100121) [ 0.793521] ACPI: Dynamic OEM Table Load: [ 0.793528] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20100121) [ 0.872981] ACPI: Interpreter enabled [ 0.872992] ACPI: (supports S0 S3 S4 S5) [ 0.873064] ACPI: Using IOAPIC for interrupt routing [ 0.882723] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62 [ 0.883072] ACPI: No dock devices found. [ 0.883084] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.883882] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.924187] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.924509] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.924581] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.924659] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 0.924758] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT] [ 0.924973] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.925064] pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d [ 0.925069] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.930212] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.930327] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.930436] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.930547] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.930655] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.930764] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.930873] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.930979] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.932142] PCI: Using ACPI for IRQ routing [ 0.967119] pnp: PnP ACPI init [ 0.967151] ACPI: bus type pnp registered [ 0.968356] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.968516] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.968586] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active) [ 0.968818] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.968915] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.969206] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.969293] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.969418] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.969528] pnp 00:08: Plug and Play ACPI device, IDs SYN1e3f SYN1e00 SYN0002 PNP0f13 (active) [ 0.969969] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.970574] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.970617] pnp: PnP ACPI: found 11 devices [ 0.970622] ACPI: ACPI bus type pnp unregistered [ 1.138064] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 1.138331] ACPI: AC Adapter [ACAD] (off-line) [ 1.139068] ACPI: Lid Switch [LID0] [ 1.139176] ACPI: Power Button [PWRB] [ 1.139286] ACPI: Power Button [PWRF] [ 1.144637] ACPI: Thermal Zone [TZ01] (0 C) [ 1.144677] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 1.144693] ACPI: Battery Slot [BAT0] (battery present) [ 1.206926] ACPI: Battery Slot [BAT0] (battery present) [ 13.176993] acpi device:1a: registered as cooling_device4 [ 13.179931] acpi device:1b: registered as cooling_device5 [ 13.180221] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 13.219589] acpi device:20: registered as cooling_device6 [ 13.220851] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 1649.915134] i8042 aux 00:08: wake-up capability disabled by ACPI [ 1649.915147] i8042 kbd 00:07: wake-up capability enabled by ACPI [ 1650.931028] r8169 0000:03:00.0: wake-up capability enabled by ACPI [ 1650.954743] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI [ 1650.978733] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI [ 1651.010950] ACPI: Preparing to enter system sleep state S3 [ 1652.251505] ACPI: Low-level resume complete [ 1652.360953] ACPI: Waking up from system sleep state S3 [ 1652.427581] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI [ 1652.435579] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI [ 1652.437887] r8169 0000:03:00.0: wake-up capability disabled by ACPI [ 1652.506660] i8042 kbd 00:07: wake-up capability disabled by ACPI [ 1661.238234] ACPI Error: No handler for Region [CMS0] (ffff8801d5035558) [SystemCMOS] (20110623/evregion-373) [ 1661.238253] ACPI Error: Region SystemCMOS (ID=5) has no handler (20110623/exfldio-292) [ 1661.238268] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q33] (Node ffff8801d5054de8), AE_NOT_EXIST (20110623/psparse-536) [ 3151.784288] i8042 aux 00:08: wake-up capability disabled by ACPI [ 3151.784301] i8042 kbd 00:07: wake-up capability enabled by ACPI [ 3152.797676] r8169 0000:03:00.0: wake-up capability enabled by ACPI [ 3152.821379] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI [ 3152.845367] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI [ 3152.877600] ACPI: Preparing to enter system sleep state S3 [ 3154.313213] ACPI: Low-level resume complete [ 3154.422297] ACPI: Waking up from system sleep state S3 [ 3154.489692] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI [ 3154.497667] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI [ 3154.505947] r8169 0000:03:00.0: wake-up capability disabled by ACPI [ 3154.568985] i8042 kbd 00:07: wake-up capability disabled by ACPI [ 3162.745149] ACPI Error: No handler for Region [CMS0] (ffff8801d5035558) [SystemCMOS] (20110623/evregion-373) [ 3162.745168] ACPI Error: Region SystemCMOS (ID=5) has no handler (20110623/exfldio-292) [ 3162.745183] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q33] (Node ffff8801d5054de8), AE_NOT_EXIST (20110623/psparse-536) [ 6775.723501] ACPI Error: No handler for Region [CMS0] (ffff8801d5035558) [SystemCMOS] (20110623/evregion-373) [ 6775.723519] ACPI Error: Region SystemCMOS (ID=5) has no handler (20110623/exfldio-292) [ 6775.723535] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q33] (Node ffff8801d5054de8), AE_NOT_EXIST (20110623/psparse-536) [10388.004760] ACPI Error: No handler for Region [CMS0] (ffff8801d5035558) [SystemCMOS] (20110623/evregion-373) [10388.004778] ACPI Error: Region SystemCMOS (ID=5) has no handler (20110623/exfldio-292) [10388.004801] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q33] (Node ffff8801d5054de8), AE_NOT_EXIST (20110623/psparse-536) [10723.591930] i8042 aux 00:08: wake-up capability disabled by ACPI [10723.591942] i8042 kbd 00:07: wake-up capability enabled by ACPI [10724.607624] r8169 0000:03:00.0: wake-up capability enabled by ACPI [10724.631349] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI [10724.655339] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI [10724.687572] ACPI: Preparing to enter system sleep state S3 [10726.123176] ACPI: Low-level resume complete [10726.232181] ACPI: Waking up from system sleep state S3 [10726.303653] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI [10726.311648] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI [10726.315734] r8169 0000:03:00.0: wake-up capability disabled by ACPI [10726.379287] i8042 kbd 00:07: wake-up capability disabled by ACPI [10734.393523] ACPI Error: No handler for Region [CMS0] (ffff8801d5035558) [SystemCMOS] (20110623/evregion-373) [10734.393542] ACPI Error: Region SystemCMOS (ID=5) has no handler (20110623/exfldio-292) [10734.393557] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q33] (Node ffff8801d5054de8), AE_NOT_EXIST (20110623/ps Continuous sound from the fan is very annoying, any help would highly appreciated.

  Read the article

• Ubuntu 12.04 KVM running Ubuntu 12.04 with linux-image-virtual crash on boot

  - by D.Mill

  One of my VMs is stuck on "pause" in virsh. If I destroy and restart it, it will go to pause after a bit of time as "running". I can at best enter my username at login if I'm quick but it'll then shutdown. I don't know where to start with this so any help would be great!! I can access the VMs files via guestfish. the kern.log and syslog don't populate new lines. This is the last input I get from kern.log: Dec 13 11:21:08 soft201 kernel: imklog 5.8.6, log source = /proc/kmsg started. Dec 13 11:21:08 soft201 kernel: [ 0.000000] Initializing cgroup subsys cpuset Dec 13 11:21:08 soft201 kernel: [ 0.000000] Initializing cgroup subsys cpu Dec 13 11:21:08 soft201 kernel: [ 0.000000] Linux version 3.2.0-34-virtual (buildd@allspice) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #53-Ubuntu SMP Thu Nov 15 11:08:40 UTC 2012 (Ubuntu 3.2.0-34.53-virtual 3.2.33) Dec 13 11:21:08 soft201 kernel: [ 0.000000] Command line: root=UUID=61d48b48-a06a-48fb-842e-b38014086a93 ro quiet splash Dec 13 11:21:08 soft201 kernel: [ 0.000000] KERNEL supported cpus: Dec 13 11:21:08 soft201 kernel: [ 0.000000] Intel GenuineIntel Dec 13 11:21:08 soft201 kernel: [ 0.000000] AMD AuthenticAMD Dec 13 11:21:08 soft201 kernel: [ 0.000000] Centaur CentaurHauls Dec 13 11:21:08 soft201 kernel: [ 0.000000] BIOS-provided physical RAM map: Dec 13 11:21:08 soft201 kernel: [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) Dec 13 11:21:08 soft201 kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfffc000 (usable) Dec 13 11:21:08 soft201 kernel: [ 0.000000] BIOS-e820: 00000000dfffc000 - 00000000e0000000 (reserved) Dec 13 11:21:08 soft201 kernel: [ 0.000000] BIOS-e820: 00000000feffc000 - 00000000ff000000 (reserved) Dec 13 11:21:08 soft201 kernel: [ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) Dec 13 11:21:08 soft201 kernel: [ 0.000000] BIOS-e820: 0000000100000000 - 0000000a20000000 (usable) Dec 13 11:21:08 soft201 kernel: [ 0.000000] NX (Execute Disable) protection: active Dec 13 11:21:08 soft201 kernel: [ 0.000000] DMI 2.4 present. Dec 13 11:21:08 soft201 kernel: [ 0.000000] DMI: Bochs Bochs, BIOS Bochs 01/01/2007 Dec 13 11:21:08 soft201 kernel: [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) Dec 13 11:21:08 soft201 kernel: [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) Dec 13 As you can see the last line gets cut off. I don't even know if this is that relevant. dmesg logs are empty. The qemu log for the VM returns this: 2012-12-13 12:29:47.584+0000: starting up LC_ALL=C PATH=/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/sbin:/sbin:/bin QEMU_AUDIO_DRV=none /usr/bin/kvm -S -M pc-1.0 -enable-kvm -m 40960 -smp 14,sockets=14,cores=1,threads=1 -name numerink201 -uuid f4a889ed-a089-05d0-cc9d-9825ab1faeba -nodefconfig -nodefaults -chardev socket,id=charmonitor,path=/var/lib/libvirt/qemu/numerink201.monitor,server,nowait -mon chardev=charmonitor,id=monitor,mode=control -rtc base=utc -no-shutdown -drive file=/var/lib/libvirt/images/client.soft.fr/tmpcZAD9U.qcow2,if=none,id=drive-ide0-0-0,format=qcow2 -device ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0,bootindex=1 -fsdev local,security_model=none,id=fsdev-fs0,path=/home/shared_folders/soft201 -device virtio-9p-pci,id=fs0,fsdev=fsdev-fs0,mount_tag=hostshare,bus=pci.0,addr=0x5 -netdev tap,fd=18,id=hostnet0 -device virtio-net-pci,netdev=hostnet0,id=net0,mac=02:00:00:1d:b9:e7,bus=pci.0,addr=0x3 -chardev pty,id=charserial0 -device isa-serial,chardev=charserial0,id=serial0 -usb -vnc 127.0.0.1:0 -vga cirrus -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x4 char device redirected to /dev/pts/3 qemu: terminating on signal 15 from pid 28248 2012-12-13 12:30:14.455+0000: shutting down I've added more logging, libvirt.log gives me this: 2012-12-13 13:24:38.525+0000: 27694: info : libvirt version: 0.9.8 2012-12-13 13:24:38.525+0000: 27694: error : virExecWithHook:328 : Cannot find 'pm-is-supported' in path: No such file or directory 2012-12-13 13:24:38.525+0000: 27694: warning : qemuCapsInit:856 : Failed to get host power management capabilities 2012-12-13 13:24:39.865+0000: 27694: error : virExecWithHook:328 : Cannot find 'pm-is-supported' in path: No such file or directory 2012-12-13 13:24:39.865+0000: 27694: warning : lxcCapsInit:77 : Failed to get host power management capabilities 2012-12-13 13:24:39.866+0000: 27694: error : virExecWithHook:328 : Cannot find 'pm-is-supported' in path: No such file or directory 2012-12-13 13:24:39.866+0000: 27694: warning : umlCapsInit:87 : Failed to get host power management capabilities I don't really know where to go from here. I'll post whatever info you require

  Read the article

• Cannot ping host stale ARP cache?

  - by gkchicago

  I am having a strange issue with a Debian (Lenny/Linux 2.6.26-2-amd64) that has been driving me nuts. On some machines within my network I can ping the host in question just fine, other times I have to manually hard-code the ARP ethernet address for the IP in order to establish connectivity. I've finally worked it down to somehow involving ARP. I just found how to fix it in a way that made it work but I'm looking for help explaining this issue and also I don't trust my fix to be permanent.. My thought process has been the following but I just can't make any sense out of it: Could it be the card? (Intel 82555 rev 4) Could it be because there are two network cards? (Default route is eth0) Could it be because of the network aliases? Lenny? AMD x86_64? Argh.. Thank you for any insight you might have // Ping doesn't go thru [gordon@ubuntu ~]$ ping 192.168.135.101 PING 192.168.135.101 (192.168.135.101) 56(84) bytes of data. --- 192.168.135.101 ping statistics --- 4 packets transmitted, 0 received, 100% packet loss, time 3014ms // Here's the ARP Table, sometimes the .151 address is good, sometimes it // also matches the Gateways MAC like .101 is doing right here. [gordon@ubuntu ~]$ cat /proc/net/arp IP address HW type Flags HW address Mask Device 192.168.135.15 0x1 0x2 00:0B:DB:2B:24:89 * eth0 192.168.135.151 0x1 0x2 00:0B:6A:3A:30:A6 * eth0 192.168.135.1 0x1 0x2 00:1A:A2:2D:2A:04 * eth0 192.168.135.101 0x1 0x2 00:1A:A2:2D:2A:04 * eth0 // Drop the bad arp table listing and set it manually based on /sbin/ifconfig [gordon@ubuntu ~]$ sudo arp -d 192.168.135.101 [gordon@ubuntu ~]$ sudo arp -s 192.168.135.101 00:0B:6A:3A:30:A6 // Ping starts going thru..?!? [gordon@ubuntu ~]$ ping 192.168.135.101 PING 192.168.135.101 (192.168.135.101) 56(84) bytes of data. 64 bytes from 192.168.135.101: icmp_seq=1 ttl=64 time=15.8 ms 64 bytes from 192.168.135.101: icmp_seq=2 ttl=64 time=15.9 ms 64 bytes from 192.168.135.101: icmp_seq=3 ttl=64 time=16.0 ms 64 bytes from 192.168.135.101: icmp_seq=4 ttl=64 time=15.9 ms --- 192.168.135.101 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3012ms rtt min/avg/max/mdev = 15.836/15.943/16.064/0.121 ms The following is my network config on this. gordon@db01:~$ /sbin/ifconfig eth0 Link encap:Ethernet HWaddr 00:0b:6a:3a:30:a6 inet addr:192.168.135.151 Bcast:192.168.135.255 Mask:255.255.255.0 inet6 addr: fe80::20b:6aff:fe3a:30a6/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:15476725 errors:0 dropped:0 overruns:0 frame:0 TX packets:10030036 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:18565307359 (17.2 GiB) TX bytes:3412098075 (3.1 GiB) eth0:0 Link encap:Ethernet HWaddr 00:0b:6a:3a:30:a6 inet addr:192.168.135.150 Bcast:192.168.135.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 eth0:1 Link encap:Ethernet HWaddr 00:0b:6a:3a:30:a6 inet addr:192.168.135.101 Bcast:192.168.135.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 eth1 Link encap:Ethernet HWaddr 00:e0:81:2a:6e:d0 inet addr:10.10.62.1 Bcast:10.10.62.255 Mask:255.255.255.0 inet6 addr: fe80::2e0:81ff:fe2a:6ed0/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:10233315 errors:0 dropped:0 overruns:0 frame:0 TX packets:19400286 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1112500658 (1.0 GiB) TX bytes:27952809020 (26.0 GiB) Interrupt:24 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:387 errors:0 dropped:0 overruns:0 frame:0 TX packets:387 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:41314 (40.3 KiB) TX bytes:41314 (40.3 KiB) gordon@db01:~$ sudo mii-tool -v eth0 eth0: negotiated 100baseTx-FD, link ok product info: Intel 82555 rev 4 basic mode: autonegotiation enabled basic status: autonegotiation complete, link ok capabilities: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD advertising: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD flow-control link partner: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD gordon@db01:~$ sudo route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface localnet * 255.255.255.0 U 0 0 0 eth0 10.10.62.0 * 255.255.255.0 U 0 0 0 eth1 default 192.168.135.1 0.0.0.0 UG 0 0 0 eth0

  Read the article

• Networking in VirtualBox

  - by Fat Bloke

  Networking in VirtualBox is extremely powerful, but can also be a bit daunting, so here's a quick overview of the different ways you can setup networking in VirtualBox, with a few pointers as to which configurations should be used and when. VirtualBox allows you to configure up to 8 virtual NICs (Network Interface Controllers) for each guest vm (although only 4 are exposed in the GUI) and for each of these NICs you can configure: Which virtualized NIC-type is exposed to the Guest. Examples include: Intel PRO/1000 MT Server (82545EM),  AMD PCNet FAST III (Am79C973, the default) or  a Paravirtualized network adapter (virtio-net). How the NIC operates with respect to your Host's physical networking. The main modes are: Network Address Translation (NAT) Bridged networking Internal networking Host-only networking NAT with Port-forwarding The choice of NIC-type comes down to whether the guest has drivers for that NIC.  VirtualBox, suggests a NIC based on the guest OS-type that you specify during creation of the vm, and you rarely need to modify this. But the choice of networking mode depends on how you want to use your vm (client or server) and whether you want other machines on your network to see it. So let's look at each mode in a bit more detail... Network Address Translation (NAT) This is the default mode for new vm's and works great in most situations when the Guest is a "client" type of vm. (i.e. most network connections are outbound). Here's how it works: When the guest OS boots,  it typically uses DHCP to get an IP address. VirtualBox will field this DHCP request and tell the guest OS its assigned IP address and the gateway address for routing outbound connections. In this mode, every vm is assigned the same IP address (10.0.2.15) because each vm thinks they are on their own isolated network. And when they send their traffic via the gateway (10.0.2.2) VirtualBox rewrites the packets to make them appear as though they originated from the Host, rather than the Guest (running inside the Host). This means that the Guest will work even as the Host moves from network to network (e.g. laptop moving between locations), and from wireless to wired connections too. However, how does another computer initiate a connection into a Guest?  e.g. connecting to a web server running in the Guest. This is not (normally) possible using NAT mode as there is no route into the Guest OS. So for vm's running servers we need a different networking mode.... Bridged Networking Bridged Networking is used when you want your vm to be a full network citizen, i.e. to be an equal to your host machine on the network. In this mode, a virtual NIC is "bridged" to a physical NIC on your host, like this: The effect of this is that each VM has access to the physical network in the same way as your host. It can access any service on the network such as external DHCP services, name lookup services, and routing information just as the host does. Logically, the network looks like this: The downside of this mode is that if you run many vm's you can quickly run out of IP addresses or your network administrator gets fed up with you asking for statically assigned IP addresses. Secondly, if your host has multiple physical NICs (e.g. Wireless and Wired) you must reconfigure the bridge when your host jumps networks.  Hmm, so what if you want to run servers in vm's but don't want to involve your network administrator? Maybe one of the next 2 modes is for you... Internal Networking When you configure one or more vm's to sit on an Internal network, VirtualBox ensures that all traffic on that network stays within the host and is only visible to vm's on that virtual network. Configuration looks like this: The internal network ( in this example "intnet" ) is a totally isolated network and so is very "quiet". This is good for testing when you need a separate, clean network, and you can create sophisticated internal networks with vm's that provide their own services to the internal network. (e.g. Active Directory, DHCP, etc). Note that not even the Host is a member of the internal network, but this mode allows vm's to function even when the Host is not connected to a network (e.g. on a plane). Note that in this mode, VirtualBox provides no "convenience" services such as DHCP, so your machines must be statically configured or one of the vm's needs to provide a DHCP/Name service. Multiple internal networks are possible and you can configure vm's to have multiple NICs to sit across internal and other network modes and thereby provide routes if needed. But all this sounds tricky. What if you want an Internal Network that the host participates on with VirtualBox providing IP addresses to the Guests? Ah, then for this, you might want to consider Host-only Networking... Host-only Networking Host-only Networking is like Internal Networking in that you indicate which network the Guest sits on, in this case, "vboxnet0": All vm's sitting on this "vboxnet0" network will see each other, and additionally, the host can see these vm's too. However, other external machines cannot see Guests on this network, hence the name "Host-only". Logically, the network looks like this: This looks very similar to Internal Networking but the host is now on "vboxnet0" and can provide DHCP services. To configure how a Host-only network behaves, look in the VirtualBox Manager...Preferences...Network dialog: Port-Forwarding with NAT Networking Now you may think that we've provided enough modes here to handle every eventuality but here's just one more... What if you cart around a mobile-demo or dev environment on, say, a laptop and you have one or more vm's that you need other machines to connect into? And you are continually hopping onto different (customer?) networks. In this scenario: NAT - won't work because external machines need to connect in. Bridged - possibly an option, but does your customer want you eating IP addresses and can your software cope with changing networks? Internal - we need the vm(s) to be visible on the network, so this is no good. Host-only - same problem as above, we want external machines to connect in to the vm's. Enter Port-forwarding to save the day! Configure your vm's to use NAT networking; Add Port Forwarding rules; External machines connect to "host":"port number" and connections are forwarded by VirtualBox to the guest:port number specified. For example, if your vm runs a web server on port 80, you could set up rules like this:  ...which reads: "any connections on port 8080 on the Host will be forwarded onto this vm's port 80".  This provides a mobile demo system which won't need re-configuring every time you open your laptop lid. Summary VirtualBox has a very powerful set of options allowing you to set up almost any configuration your heart desires. For more information, check out the VirtualBox User Manual on Virtual Networking. -FB 

  Read the article

• MySQL 5.5 (Percona) assertion failure log.. what would cause this?

  - by Tom Geee

  256GB, 64 Core , AMD running Ubuntu 12.04 with Percona MySQL 5.5.28. Below is the assertion failure. We just had a second assertion failure (different "in file", position, etc) while running a large set of inserts. After the first failure, MySQL restarted after a reboot only - after continuously looping on the same error after trying to recover. I decided to do a mysqlcheck with -o for optimize. Since these are all Innodb tables (very large tables, 60+GB) this would do an alter table on all tables. In the middle of this , the below assertion failure happened again: 121115 22:30:31 InnoDB: Assertion failure in thread 140086589445888 in file btr0pcur.c line 452 InnoDB: Failing assertion: btr_page_get_prev(next_page, mtr) == buf_block_get_page_no(btr_pcur_get_block(cursor)) InnoDB: We intentionally generate a memory trap. InnoDB: Submit a detailed bug report to http://bugs.mysql.com. InnoDB: If you get repeated assertion failures or crashes, even InnoDB: immediately after the mysqld startup, there may be InnoDB: corruption in the InnoDB tablespace. Please refer to InnoDB: http://dev.mysql.com/doc/refman/5.5/en/forcing-innodb-recovery.html InnoDB: about forcing recovery. 03:30:31 UTC - mysqld got signal 6 ; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. Please help us make Percona Server better by reporting any bugs at http://bugs.percona.com/ key_buffer_size=536870912 read_buffer_size=131072 max_used_connections=404 max_threads=500 thread_count=90 connection_count=90 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_threads = 1618416 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. Thread pointer: 0x14edeb710 Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... stack_bottom = 7f687366ce80 thread_stack 0x30000 /usr/sbin/mysqld(my_print_stacktrace+0x2e)[0x7b52ee] /usr/sbin/mysqld(handle_fatal_signal+0x484)[0x68f024] /lib/x86_64-linux-gnu/libpthread.so.0(+0xfcb0)[0x7f9cbb23fcb0] /lib/x86_64-linux-gnu/libc.so.6(gsignal+0x35)[0x7f9cbaea6425] /lib/x86_64-linux-gnu/libc.so.6(abort+0x17b)[0x7f9cbaea9b8b] /usr/sbin/mysqld[0x858463] /usr/sbin/mysqld[0x804513] /usr/sbin/mysqld[0x808432] /usr/sbin/mysqld[0x7db8bf] /usr/sbin/mysqld(_Z13rr_sequentialP11READ_RECORD+0x1d)[0x755aed] /usr/sbin/mysqld(_Z17mysql_alter_tableP3THDPcS1_P24st_ha_create_informationP10TABLE_LISTP10Alter_infojP8st_orderb+0x216b)[0x60399b] /usr/sbin/mysqld(_Z20mysql_recreate_tableP3THDP10TABLE_LIST+0x166)[0x604bd6] /usr/sbin/mysqld[0x647da1] /usr/sbin/mysqld(_ZN24Optimize_table_statement7executeEP3THD+0xde)[0x64891e] /usr/sbin/mysqld(_Z21mysql_execute_commandP3THD+0x1168)[0x59b558] /usr/sbin/mysqld(_Z11mysql_parseP3THDPcjP12Parser_state+0x30c)[0x5a132c] /usr/sbin/mysqld(_Z16dispatch_command19enum_server_commandP3THDPcj+0x1620)[0x5a2a00] /usr/sbin/mysqld(_Z24do_handle_one_connectionP3THD+0x14f)[0x63ce6f] /usr/sbin/mysqld(handle_one_connection+0x51)[0x63cf31] /lib/x86_64-linux-gnu/libpthread.so.0(+0x7e9a)[0x7f9cbb237e9a] /lib/x86_64-linux-gnu/libc.so.6(clone+0x6d)[0x7f9cbaf63cbd] Trying to get some variables. Some pointers may be invalid and cause the dump to abort. Query (7f6300004b60): is an invalid pointer Connection ID (thread ID): 876 Status: NOT_KILLED You may download the Percona Server operations manual by visiting http://www.percona.com/software/percona-server/. You may find information in the manual which will help you identify the cause of the crash. 121115 22:31:07 [Note] Plugin 'FEDERATED' is disabled. 121115 22:31:07 InnoDB: The InnoDB memory heap is disabled 121115 22:31:07 InnoDB: Mutexes and rw_locks use GCC atomic builtins .. Then it recovered , without a reboot this time. from the log, what would cause this? I am currently running a dump to see if the problem resurfaces. edit: data partition is all in / since this is a hosted, defaulted file system unfortunately: Filesystem Size Used Avail Use% Mounted on /dev/vda3 742G 445G 260G 64% / udev 121G 4.0K 121G 1% /dev tmpfs 49G 248K 49G 1% /run none 5.0M 0 5.0M 0% /run/lock none 121G 0 121G 0% /run/shm /dev/vda1 99M 54M 40M 58% /boot my.cnf: [client] port = 3306 socket = /var/run/mysqld/mysqld.sock [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] skip-name-resolve innodb_file_per_table default_storage_engine=InnoDB user = mysql socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /data/mysql tmpdir = /tmp skip-external-locking key_buffer = 512M max_allowed_packet = 128M thread_stack = 192K thread_cache_size = 64 myisam-recover = BACKUP max_connections = 500 table_cache = 812 table_definition_cache = 812 #query_cache_limit = 4M #query_cache_size = 512M join_buffer_size = 512K innodb_additional_mem_pool_size = 20M innodb_buffer_pool_size = 196G #innodb_file_io_threads = 4 #innodb_thread_concurrency = 12 innodb_flush_log_at_trx_commit = 1 innodb_log_buffer_size = 8M innodb_log_file_size = 1024M innodb_log_files_in_group = 2 innodb_max_dirty_pages_pct = 90 innodb_lock_wait_timeout = 120 log_error = /var/log/mysql/error.log long_query_time = 5 slow_query_log = 1 slow_query_log_file = /var/log/mysql/slowlog.log [mysqldump] quick quote-names max_allowed_packet = 16M [mysql] [isamchk] key_buffer = 16M

  Read the article

• Is Apache 2.2.22 able to sustain 1.000 simultaneous connected clients?

  - by Fnux

  For an article in a news paper, I'm benchmarking 5 different web servers (Apache2, Cherokee, Lighttpd, Monkey and Nginx). The tests made consist of measuring the execution times as well as different parameters such as the number of request served per second, the amount of RAM, the CPU used, during a growing load of simultaneous clients (from 1 to 1.000 with a step of 10) each client sending 1.000.000 requets of a small fixed file, then of a medium fixed file, then a small dynamic content (hello.php) and finally a complex dynamic content (the computation of the reimbursment of a loan). All the web servers are able to sustain such a load (up to 1.000 clients) but Apache2 which always stops to respond when the test reach 450 to 500 simultaneous clients. My configuration is : CPU: AMD FX 8150 8 cores @ 4.2 GHz RAM: 32 Gb. SSD: 2 x Crucial 240 Gb SATA6 OS: Ubuntu 12.04.3 64 bit WS: Apache 2.2.22 My Apache2 configuration is as follows: /etc/apache2/apache2.conf LockFile ${APACHE_LOCK_DIR}/accept.lock PidFile ${APACHE_PID_FILE} Timeout 30 KeepAlive On MaxKeepAliveRequests 1000000 KeepAliveTimeout 2 ServerName "fnux.net" <IfModule mpm_prefork_module> StartServers 16 MinSpareServers 16 MaxSpareServers 16 ServerLimit 2048 MaxClients 1024 MaxRequestsPerChild 0 </IfModule> User ${APACHE_RUN_USER} Group ${APACHE_RUN_GROUP} AccessFileName .htaccess <Files ~ "^\.ht"> Order allow,deny Deny from all Satisfy all </Files> DefaultType None HostnameLookups Off ErrorLog ${APACHE_LOG_DIR}/error.log LogLevel emerg Include mods-enabled/*.load Include mods-enabled/*.conf Include httpd.conf Include ports.conf LogFormat "%v:%p %h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined LogFormat "%h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %O" common LogFormat "%{Referer}i -> %U" referer LogFormat "%{User-agent}i" agent Include conf.d/ Include sites-enabled/ /etc/apache2/ports.conf NameVirtualHost *:8180 Listen 8180 <IfModule mod_ssl.c> Listen 443 </IfModule> <IfModule mod_gnutls.c> Listen 443 </IfModule> /etc/apache2/mods-available <IfModule mod_fastcgi.c> AddHandler php5-fcgi .php Action php5-fcgi /cgi-bin/php5.external <Location "/cgi-bin/php5.external"> Order Deny,Allow Deny from All Allow from env=REDIRECT_STATUS </Location> </IfModule> /etc/apache2/sites-available/default <VirtualHost *:8180> ServerAdmin webmaster@localhost DocumentRoot /var/www/apache2 <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log LogLevel emerg ##### CustomLog ${APACHE_LOG_DIR}/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> <IfModule mod_fastcgi.c> AddHandler php5-fcgi .php Action php5-fcgi /php5-fcgi Alias /php5-fcgi /usr/lib/cgi-bin/php5-fcgi FastCgiExternalServer /usr/lib/cgi-bin/php5-fcgi -host 127.0.0.1:9000 -pass-header Authorization </IfModule> </VirtualHost> /etc/security/limits.conf * soft nofile 1000000 * hard nofile 1000000 So, I would trully appreciate your advice to setup Apache2 to make it able to sustain 1.000 simultaneous clients, if this is even possible. TIA for your help. Cheers.

  Read the article

• Why do we need different CPU architecture for server & mini/mainframe & mixed-core?

  - by claws

  Hello, I was just wondering what other CPU architectures are available other than INTEL & AMD. So, found List of CPU architectures on Wikipedia. It categorizes notable CPU architectures into following categories. Embedded CPU architectures Microcomputer CPU architectures Workstation/Server CPU architectures Mini/Mainframe CPU architectures Mixed core CPU architectures I was analyzing the purposes and have few doubts. I taking Microcomputer CPU (PC) architecture as reference and comparing others. Embedded CPU architecture: They are a completely new world. Embedded systems are small & do very specific task mostly real time & low power consuming so we do not need so many & such wide registers available in a microcomputer CPU (typical PC). In other words we do need a new small & tiny architecture. Hence new architecture & new instruction RISC. The above point also clarifies why do we need a separate operating system (RTOS). Workstation/Server CPU architectures I don't know what is a workstation. Someone clarify regarding the workstation. As of the server. It is dedicated to run a specific software (server software like httpd, mysql etc.). Even if other processes run we need to give server process priority therefore there is a need for new scheduling scheme and thus we need operating system different than general purpose one. If you have any more points for the need of server OS please mention. But I don't get why do we need a new CPU Architecture. Why cant Microcomputer CPU architecture do the job. Can someone please clarify? Mini/Mainframe CPU architectures Again I don't know what are these & what miniframes or mainframes used for? I just know they are very big and occupy complete floor. But I never read about some real world problems they are trying to solve. If any one working on one of these. Share your knowledge. Can some one clarify its purpose & why is it that microcomputer CPU archicture not suitable for it? Is there a new kind of operating system for this too? Why? Mixed core CPU architectures Never heard of these. If possible please keep your answer in this format: XYZ CPU architectures Purpose of XYZ Need for a new architecture. why can't current microcomputer CPU architecture work? They go upto 3GHZ & have upto 8 cores. Need for a new Operating System Why do we need a new kind of operating system for this kind of archictures?

  Read the article

• Computer makes hissing noise, turns off after few seconds

  - by Kaustubh P

  I have a problem similar to the questions posted here and here. This is my config: Asus M3N78-EM, with AMD Phenom X3 720 2800 Black Edition, 4GB Transcend DDR2 RAM, Nvidia 9400GT. HD is a 160 GB IDE, and a LG IDE DVD-ROM. The power button is a bit off, I have removed the cover of the switch, and the only way it turns on is just giving the "stick" under the cover a gentle press. It turns on sometimes, and at other times, I have to cut-off the power from the PSU, and try again. I will describe my problem in as detail as possible, please bear with me: The problem has started in the last week, a few months after I changed the to the powerswitch arrangement as described above. The PC makes a hissing noise, and I wasn't able to pin-point the noise source, because of the various other fans. At first, removing the HD, rebooting w/o the HD, turning it off, reconnecting and booting made the problem go away. But of late, it doesn't happen. As suggested in the other questions, I tried reducing the load by disconnecting both the IDE drives, and the problem (noise + turn-off) still occurs. I also connected another 80G IDE HD,today morning, adn it still made that noise, and turned off. I also opened up the PSU, but I couldn't see any fault in that, I tried rotating the fan by blowing into the blades, and with my fingers, but the hissing noise didn't come from there. Or maybe the speed wasn't enough to evoke that noise. A few weeks ago: I had cleaned the Cabinet and had repasted the processor and its fan using some thermal paste. Could that be at fault? I also used a vacuum to blow the dust out of the PSU, could the power have been too much, to maybe offset the fan or something? A label on the PSU says it uses a ball-bearing fan. That only leaves me with the Processor fan and the processor itself. I didn't try removing the processor fan and processor from the motherboard, and then turning the PC on, fearing damage. Will doing so cause any damage? What can I do to localize and pin-point the problem? Also, after a few tries, the Computer starts up. Sometimes it turns of within 2 seconds, sometimes after the POST. Once it turned off at the grub. Another time it booted completely and then turned off. The only way to ensure that the PC wont turn off, is if the hissing noise stops. EDIT: I suspect it to be the Processor/Processor fan, owing to the source of noise. All the config, except for the Cabinet, is just over a year old. EDIT2: I also just remembered, that I had set the "On-power resume" to turn on, i.e. If I supply he PC with power, it will turn itself on, w/o me needing to press the switch. I had done that to workaround the faulty power-switch, as noted above. EDIT3: I calculated the power my system needs, from the antec site, and I just arrived at 292W

  Read the article

• CodePlex Daily Summary for Monday, July 15, 2013

  CodePlex Daily Summary for Monday, July 15, 2013Popular ReleasesMVC Forum: MVC Forum v1.0: Finally version 1.0 is here! We have been fixing a few bugs, and making sure the release is as stable as possible. We have also changed the way configuration of the application works, mostly how to add your own code or replace some of the standard code with your own. If you download and use our software, please give us some sort of feedback, good or bad!SharePoint 2013 TypeScript Definitions: Release 1.1: TypeScript 0.9 support SharePoint TypeScript Definitions are now compliant with the new version of TypeScript TypeScript generics are now used for defining collection classes (derivatives of SP.ClientCollection object) Improved coverage Added mQuery definitions (m$) Added SPClientAutoFill definitions SP.Utilities namespace is now fully covered SP.UI modal dialog definitions improved CSR definitions improved, added some missing methods and context properties, mostly related to list ...GoAgent GUI: GoAgent GUI ??? 1.0.0: ????GoAgent GUI????，???????????.Net Framework 4.0 ???????: Windows 8 x64 Windows 8 x86 Windows 7 x64 Windows 7 x86 ???????： Windows 8.1 Preview (x86/x64) ???????： Windows XP ????： ????????GoAgent????，????????，?????????????，???????????????????，??????????，????。PiGraph: PiGraph 2.0.8.13: C?p nh?t:Các l?i dã s?a: S?a l?i không nh?p du?c s? âm. L?i tabindex trong giao di?n Thêm hàm Các l?i chua kh?c ph?c: L?i ghi chú nh?p nháy màu. L?i khung ghi chú vu?t ra kh?i biên khi luu file. Luu ý:N?u không kh?i d?ng duoc chuong trình, b?n nên c?p nh?t driver card d? h?a phiên b?n m?i nh?t: AMD Graphics Drivers NVIDIA Driver Xem yêu c?u h? th?ngD3D9Client: D3D9Client R12 for Orbiter Beta: D3D9Client release for orbiter BetaVidCoder: 1.4.23: New in 1.4.23 Added French translation. Fixed non-x264 video encoders not sticking in video tab. New in 1.4 Updated HandBrake core to 0.9.9 Blu-ray subtitle (PGS) support Additional framerates: 30, 50, 59.94, 60 Additional sample rates: 8, 11.025, 12 and 16 kHz Additional higher bitrates for audio Same as Source Constant Framerate 24-bit FLAC encoding Added Windows Phone 8 and Apple TV 3 presets Introduced process isolation for encodes. Now if HandBrake crashes, VidCoder will ...Project Server 2013 Event Handler Admin Tool: PSI Event Admin Tool: Download & exract the File. Use LoggerAdmin to upload the event handlers in project server 2013. PSIEventLogger\LoggerAdmin\bin\DebugGherkin editor: Gherkin Editor Beta 2: Fix issue #7 and add some refactoring and code cleanupNew-NuGetPackage PowerShell Script: New-NuGetPackage.ps1 PowerShell Script v1.2: Show nuget gallery to push to when prompting user if they want to push their package.Site Templates By Steve: SharePoint 2010 CORE Site Theme By Steve WSP: Great Site Theme to start with from Steve. See project home page for install instructions. This is a nice centered, mega-menu, fixed width masterpage with styles. Remember to update the mega menu lists.SharePoint Solution Installer: SharePoint Solution Installer V1.2.8: setup2013.exe now supports CompatibilityLevel to target specific hive Use setup.exe for SP2007 & SP2010. Use setup2013.exe for SP2013.TBox - tool to make developer's life easier.: TBox 1.021: 1)Add console unit tests runner, to run unit tests in parallel from console. Also this new sub tool can save valid xml nunit report. It can help you in continuous integration. 2)Fix build scripts.LifeInSharepoint Modern UI Update: Version 2: Some minor improvements, including Audience Targeting support for quick launch links. Also removing all NextDocs references.Virtual Photonics: VTS MATLAB Package 1.0.13 Beta: This is the beta release of the MATLAB package with examples of using the VTS libraries within MATLAB. Changes for this release: Added two new examples to vts_solver_demo.m that: 1) generates and plots R(lambda) at a given rho, and chromophore concentrations assuming a power law for scattering, and 2) solves inverse problem for R(lambda) at given rho. This example solves for concentrations of HbO2, Hb and H20 given simulated measurements created using Nurbs scaled Monte Carlo and inverted u...Advanced Resource Tab for Blend: Advanced Resource Tab: This is the first alpha release of the advanced resource tab for Blend for Visual Studio 2012.Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.96: Fix for issue #19957: EXE should output the name of the file(s) being minified. Discussion #449181: throw a Sev-2 warning when trailing commas are detected on an Array literal. Perfectly legal to do so, but the behavior ends up working differently on different browsers, so throw a cross-browser warning. Add a few more known global names for improved ES6 compatibility update Nuget package to version 2.5 and automatically add the AjaxMin.targets to your project when you update the package...Outlook 2013 Add-In: Categories and Colors: This new version has a major change in the drawing of the list items: - Using owner drawn code to format the appointments using GDI (some flickering may occur, but it looks a little bit better IMHO, with separate sections). - Added category color support (if more than one category, only one color will be shown). Here, the colors Outlook uses are slightly different than the ones available in System.Drawing, so I did a first approach matching. ;-) - Added appointment status support (to show fr...Columbus Remote Desktop: 2.0 Sapphire: Added configuration settings Added update notifications Added ability to disable GPU acceleration Fixed connection bugsLINQ to Twitter: LINQ to Twitter v2.1.07: Supports .NET 3.5, .NET 4.0, .NET 4.5, Silverlight 4.0, Windows Phone 7.1, Windows Phone 8, Client Profile, Windows 8, and Windows Azure. 100% Twitter API coverage. Also supports Twitter API v1.1! Also on NuGet.DotNetNuke® Community Edition CMS: 06.02.08: Major Highlights Fixed issue where the application throws an Unhandled Error and an HTTP Response Code of 200 when the connection to the database is lost. Security FixesNone Updated Modules/Providers ModulesNone ProvidersNoneNew Projects[.Net Intl] harroc_c;mallar_a;olouso_f: The goal of this project is to create a web crawler and a web front who allows you to search in your index. You will create a mini (or large!) search engine basButterfly Storage: Butterfly Storage is a data access technology based on object-oriented database model for Windows Store applications.KaveCompany: KaveCompleave that girl alone: a team project!MyClrProfiler: This project helps you learn about and develop your own CLR profiler.NETDeob: Deobfuscate obfuscated .NET files easilyProgram stomatologie: SummarySimple Graph Library: Simple portable class library for graphs data structures. .NET, Silverlight 4/5, Windows Phone, Windows RT, Xbox 360T6502 Emulator: T6502 is a 6502 emulator written in TypeScript using AngularJS. The goal is well-organized, readable code over performance.WP8 File Access Webserver: C# HTTP server and web application on Windows Phone 8. Implements file access, browsing and downloading.wpadk: wpadk????wp7?????? ?????????，?????、SDK、wpadk?????????????。??????????????????。??????????????????，????wpadk?????????????????????????????????????。xlmUnit: xlmUnit, Unit Testing

  Read the article

• My computer freezes irregurarly

  - by Manhim

  My computer started to freeze at irregular times for 3 weeks now. What happens My computer freezes, the video stops. (No graphic glitches, it just stops) Sound keeps playing up to some time (Usually 10-30 seconds) then stops playing. Sometimes, randomly, the screen on my G-15 keyboard flickers and I see caracters not at the right places. Usually happens for about 1-2 seconds and a bit before my computer freezes. I have to keep the power button pressed for 4 seconds to shut my computer down. I still hear my hard drives and fans working. Sometimes it works with no problems for a full day, some other times it just keeps freezing each time I restart my computer and I have to leave it for the rest of the day. Sometimes my mouse freezes for a fraction of a second (Like 0.01 to 0.2 seconds) quite randomly, usually before it freezes. No errors spotted by the "Action center" unlike when I had problems with my last video card on this system (Driver errors). My G-15 LCD screen also freezes. What I did so far I have had similar problems in the past and I had changed my hard drive (It was faulty), so I tested my software RAID-0 array and it was faulty so I changed it. (I reinstalled Windows 7 with this part). I also tested with unplugging my secondary hard drive. My CPU was running at about 100 degree Celsius, I removed the dust between the fans and the heatsink and it's now between 50-60. I ran a CPU stress-test and it didn't freeze during the tests (using Prime95 on all cores) Ran a memory test (using memtest86+) for a single pass and there were no errors. Ran a GPU stress test with ati-tools and furmark and it didn't freeze during the tests. (No artefacts either) I had troubles with my graphic card when I got it, but I think that it got fixed with a driver update. I checked the voltages in my BIOS setup and they all seemed ok (±0.2 I think). I have ran on the computer without problems with Fedora 15 on an external hard drive (Appart that it couldn't load Gnome 3 and was reverting to Gnome 2, didn't want to install drivers since I use it on multiple computers) I used it to backup my files from the raid array to my 1TB hard drive for the reinstallation of Windows. (So the crashes only happenned on Windows) [The external hard drive is plugged directly on a SATA port] I contacted EVGA (My graphic card vendor) and pointed them on this question, I'm looking for an answer. Ran sensors on Fedora 15 and got this output: http://pastebin.com/0BHJnAvu When it happens When I play video games (Mostly) When I play flash games (Second most) When I'm looking at my desktop background (It rarely happens when I have a window open, but it does, sometimes) Specs Windows Seven x64 Home Premium Motherboard: M2N-SLI Deluxe CPU: AMD Phenom 9950 x2 @ 2.6GHz Memory: Kingston 4x2GB Dual Channel (Pretty basic memory sticks) Hard drives: Was 2x250GB (Western digital caviar) in raid-0 + 1TB (WD caviar black), I replaced the raid array with a 750GB (WD caviar black) [Yes I removed the array from the raid configurations] 750W Power supply No overcloking. Ever. There have been some power-downs like 4-5 weeks ago, but the problem didn't start immediately after. (I wasn't home, so my computer got shut-down) My current to-try list Change the thermal paste on my CPU. Change my graphic card with a temporary one and stress the computer. Change my power supply. In this situation, how can I successfully pin-point the current hardware problem? (If it's a hardware problem) Because I don't really have the budget to just forget and replace everything. I also don't really have hardware to test-replace current hardware.

  Read the article

• How to diagnose and solve an erratic "HDCP Support Required"?

  - by Jom Orgstrom

  I am playing a digital tv broadcast on Windows Media Center for Windows 7. I built this system so it works with HDCP, and in fact I have been able to watch tv and bluray before with this same computer. However, I suddenly started getting an "HDCP Support Required" error from WMC. The entire message is as follows: HDCP Support Required High-bandwidth Digital Content Protection (HDCP) may not be supported by the current video card. Use an HDCP-compliant display, video card, and video driver. Or, connect using an analog connection such as component or VGA. Relevant specs are: CPU: Ivy Bridge Core i7-3770 Motherboard: Asus P8H77-I Memory: 16GB DDR3-1600 Graphics: Radeon HD 7850 (Driver by AMD, version 8.982.0.0 built on 2012/07/27) Display: Acer P243w connected by HDMI Sound: Roland Quad-Capture (It complains even when I use the bundled VIA HD Audio) TV Tuner: I-O Data GV-MC7/HZ3 OS: Windows 7 Professional SP1, Windows Update enabled. All patched and up to date. As you can see, there is nothing weird or old about my setup. I am also not doing anything strange, not doing any overclocking, weird system changes and so on. One thing that does happen from time to time, is that the display goes black for a few seconds (sometimes when watching media contents, sometimes when just using photoshop or Visual Studio). This happened with my previous setup as well, so I'd be inclined to think it is a display or cable issue (apart from the BD drive, these are the only things I kept from my previous setup to this one). But being a digital transfer, as far as I know, these things either work or not. Never erratically or with decreased quality. The thing is that sometimes I can watch the TV, sometimes not. This happens with recorded programs as well, so it's not a per-program thing. Sometimes rebooting helps, sometimes it doesn't. Sometimes unplugging and plugging back the HDMI connector helps, sometimes it doesn't. Sometimes doing so doesn't even turn the screen back on, so I have to reboot. Unfortunately, WMC's error message is quite unhelpful. I'd like to know exactly where the problem is, so I can solve it. I don't want to buy a brand new display just to then find out it was a registry setting that was misconfigured. I've tried looking at the system event viewer, but these errors don't show up at all in there. Other people who have this problem seem to have a setup that is not HDCP compliant, so I turn to you guys here. Anybody knows how to diagnose this problem? Edit: So I got the Cyberlink Blu-ray disc advisor. I ran it and told me everything was okay, except for the Video Connection Type, which showed as "Digital (without HDCP)". I then proceeded to unplug the power cable from the monitor, plugged it in again, ran the tool again, and now it's "Digital (with HDCP)". Needless to say, I can watch my TV and recorded programs on WMP again. I'm guessing that at some point, something may be slightly wrong with the HDCP setup, and Windows decides to reset the entire content protection path (which leads to the screen blanking out). Usually the reset succeeds, but sometimes it doesn't, so Windows defaults to turning HDCP off. There's no way to turn it back on, except by doing a hard reset of the display. I really want to know what the exact error was, so I can fix it. Is it the cable? is it the display? is it the video card? the driver? Also, is there any other way to try and turn HDCP on again without having to hard reset the display? Oh, questions, questions...

  Read the article

• Parallel processing slower than sequential?

  - by zebediah49

  EDIT: For anyone who stumbles upon this in the future: Imagemagick uses a MP library. It's faster to use available cores if they're around, but if you have parallel jobs, it's unhelpful. Do one of the following: do your jobs serially (with Imagemagick in parallel mode) set MAGICK_THREAD_LIMIT=1 for your invocation of the imagemagick binary in question. By making Imagemagick use only one thread, it slows down by 20-30% in my test cases, but meant I could run one job per core without issues, for a significant net increase in performance. Original question: While converting some images using ImageMagick, I noticed a somewhat strange effect. Using xargs was significantly slower than a standard for loop. Since xargs limited to a single process should act like a for loop, I tested that, and found it to be about the same. Thus, we have this demonstration. Quad core (AMD Athalon X4, 2.6GHz) Working entirely on a tempfs (16g ram total; no swap) No other major loads Results: /media/ramdisk/img$ time for f in *.bmp; do echo $f ${f%bmp}png; done | xargs -n 2 -P 1 convert -auto-level real 0m3.784s user 0m2.240s sys 0m0.230s /media/ramdisk/img$ time for f in *.bmp; do echo $f ${f%bmp}png; done | xargs -n 2 -P 2 convert -auto-level real 0m9.097s user 0m28.020s sys 0m0.910s /media/ramdisk/img$ time for f in *.bmp; do echo $f ${f%bmp}png; done | xargs -n 2 -P 10 convert -auto-level real 0m9.844s user 0m33.200s sys 0m1.270s Can anyone think of a reason why running two instances of this program takes more than twice as long in real time, and more than ten times as long in processor time to complete the same task? After that initial hit, more processes do not seem to have as significant of an effect. I thought it might have to do with disk seeking, so I did that test entirely in ram. Could it have something to do with how Convert works, and having more than one copy at once means it cannot use processor cache as efficiently or something? EDIT: When done with 1000x 769KB files, performance is as expected. Interesting. /media/ramdisk/img$ time for f in *.bmp; do echo $f ${f%bmp}png; done | xargs -n 2 -P 1 convert -auto-level real 3m37.679s user 5m6.980s sys 0m6.340s /media/ramdisk/img$ time for f in *.bmp; do echo $f ${f%bmp}png; done | xargs -n 2 -P 1 convert -auto-level real 3m37.152s user 5m6.140s sys 0m6.530s /media/ramdisk/img$ time for f in *.bmp; do echo $f ${f%bmp}png; done | xargs -n 2 -P 2 convert -auto-level real 2m7.578s user 5m35.410s sys 0m6.050s /media/ramdisk/img$ time for f in *.bmp; do echo $f ${f%bmp}png; done | xargs -n 2 -P 4 convert -auto-level real 1m36.959s user 5m48.900s sys 0m6.350s /media/ramdisk/img$ time for f in *.bmp; do echo $f ${f%bmp}png; done | xargs -n 2 -P 10 convert -auto-level real 1m36.392s user 5m54.840s sys 0m5.650s

  Read the article

• Computer not POSTing "randomly"?

  - by smoth190

  I have a custom built PC that is exhibiting some...odd... behavior, something I've never seen before. It was working fine one day, and the next day, it wouldn't start. Seeing as I wanted an upgrade anyway, I purchased a new motherboard that was compatible with all my parts. While replacing the motherboard, I accidentally damaged the CPU. Well, I wanted a new one anyway... so I got a new one. Seeing as I was replacing a ton of parts already, I bought a new PSU because the old one was super loud. When I slapped it all together, it starts up, lights, fans, drives, they all start. But I get no display from the monitor. No beeps, which I believe means it doesn't POST. I figured it was the RAM, because after removing the sound card and graphics card, there was nothing else that I hadn't replaced. When I remove both sticks of RAM, I get a continuous beeping, and according to the mobo handbook, means no RAM. So I think the mobo is functional, or atleast partly. I bought new RAM, but it still didn't work. I tried 3 monitors, with both VGA and DIV. So it's probably not the monitor, either. Now, let me get to the random part. Every 20 or so boots (I should also mention, for about 3 out of 5 boots I have to unplug the PC because it won't powerdown via the button), it will POST and I'll get display. Then, after about 2 or 3 resets, it won't work again. This confuses me so much, because even when I change nothing, it will/will not work. My thought is that maybe it has something to do with the RAM not clearing or something. I also reset the CMOS battery, incase that had anything to do with it, but no eval. I found some weird suggestion online about holding the power button for 30 seconds while it was unplugged. That did nothing, but I didn't expect it would... I've replaced just about the entire computer, and all the parts are compatible. Done about everything I can think of, but nothing has worked. Hopefully someone can help me here. And as I side note: When I do get my computer to boot, it says my hardware has changed and I have to re-activate windows. But it says I have to call Microsoft to do it. So I get this fancy automated voice that asks me to enter in a code into windows, then it asks me "How many computers have you activated with this copy of Windows?". Well, I had it on my computer before I replaced everything, so I said 1. Then he yelled at me for violating my 1-use license. I dunno what's going on there, do I have to re-purchase Windows 7? And they wonder why people pirate software... That's just a bonus question, though. Specs: 8GB of DDR2 RAM (Corsair) AMD CPU (I don't know what GHz or model because I can't find the box... (I think its 4 cores of 2.8Ghz) ASRock A785GM-LE Motherboard

  Read the article

• Vista 64-bit, DISK BOOT FAILURE

  - by weka

  So I have this Acer Aspire AX3200-U3600A with Windows Vista (64-bit). Every night I turn it off and turn it back on in the morning. Around three weeks ago, I did a fresh factory reimage. Good as new. Then around two days ago, when I turned it on, I noticed it was running extremly slow. As in, it would often freeze up while I had multiple applications open when it usually never froze up. So I decided to restart my computer. Big mistake. My computer froze right after I clicked shut-down. I waited a while. Nothing. Waited some minutes. Nope. I decided to shut it down by pressing the power button. Here is where the problems begin. When I turned it back on, I saw the Windows logo and loading bar and then it loaded to black. I turned it off again forcefully by power button and then once more... then I got: AMD Data Change... Update New Data to DMI! then later the screen clears and I get: AHCI Option ROM BIOS Revision: 01.05.92 Date: 02-19-2008 Copyright (c) 2006-2008 Phoenix Technologies, LTD Port 01: Reset Port Error!! Port 02: then the screen clears again but this time, this loads from the bottom: Nvidia Boot Agent 249.0542 (copyright stuff... blah blah) PXE-E61: Media test failure, check cable. PXE-M0F: Exiting Nvidia Boot Agent DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER. So I try to go into Safe Mode. Well, first of all it doesn't load as fast. After it loads disk.sys from windows/drivers, it will wait a while (2-3 mins) THEN load. However it loads the Acer eRecovery Management Tool. I have three options: Reset computer to factory default, Restore computer from user's backup, or Exit. However, the top two options are gray and disabled where as the Exit is in blue and definitely clickable. So obviously safe mode is not there... A strong thing to note: In the beginning when all of this started, I did a Boot Windows Normal from pressing f8 and I got to my desktop! It logged me in. I could see the icons on my files. However my desktop was extremely slow as in when I clicked on the Start menu, it would wait a while, then load up the menu with JUST the gradient, no text or icons... so as you can see... it saw my HDD? Also, before anyone says, I have NO USB plugged in. My mouse and keyboard are not USB inputs, I assure you. And this came without a recovery CD AND when I went in BIOS, to change the BOOT ORDER, I did NOT see a CD-ROM option. And when I tried pressing ALT+F10 to get into Acer eRecovery Management, the top two options were disabled as well. But sometimes on start-up, I get: Windows has encountered a problem communicating with a device connected to your computer. This error can be caused by unplugging a removable storage device such as an external USB drive while the device is in use, or by faulty hardware such as a hard drive or CD-ROM drive that is failing. Make sure any removeable storage is properly connected and then restart your computer. If you continue to receive this error message, contact the hardware manufacturer. Status: 0xc00000e9 Info: An unexpected I/O error has occured. Then I tried Last Known Good Configuration Settings, that gives me a BSOD. What should I do/

  Read the article

• Gaming blew fuse and causes funny smell: how to overcome?

  - by George Tomlinson

  I've been gaming for a while now. When playing certain games this PC goes into overdrive. The fan/fans start/s to sound like a jet engine it/they get/s so busy. Also I have smelt burning when this has happened. The fuse blew on the 4 socket adapter I was using recently. On the following thread someone said this could be due to the PSU not being strong enough to handle the load, in what it seems could be a related issue someone had, although the person who posted this question did say that blowing a fan on their PC stopped it crashing in that case: http://www.tomshardware.co.uk/answers/id-2047543/gtx-650-overheating-issue.html. This is exactly what they said: Your GPU isn't overheating. 70+ before it would shutdown and cause a restart. Make sure your PSU is strong enough to handle your new system at load and possibly run Memtest to check your RAM (although not BSOD'ing and just shutting down points to the PSU). This (the PSU part) makes more sense to me than it being to do with dust etc, since it seems a more plausible explanation of why the fuse blew. The PC has no problems except when playing certain games: i.e. TERA Rising and WoW with add-ons (I think WoW is ok as long as I don't have more than 1 add-on (Healers Have To Die)). I'm just wondering if anyone knows or can suggest what I might be able to do to be able to play these games without this problem occurring. The PC's spec is this: Display: NVIDIA GeForce GTX 650 8GB RAM (6 available) Processor: AMD FX (tm) - 8120 Eight-Core Processor - 3.1 GHz, 4 Cores, 8 Logical Processors I have read on another post that forcing vsync in the Nvidia Control Panel helped with what seems could be a similar problem, so I plan to see if that solves it, God permitting. EDIT: I tried the Vsync thing, and it seems the situation may have improved, although this may be due to something else: i.e. maybe the PC was working harder yesterday, due to just having downloaded a few things or lots of things running. I'm still noticing the funny smell when playing TERA. It's not so much burning: it's more like glue. The smell might have had a burning element to it in the past, but I think it's always had a glue element. EDIT 2: the PSU is an 'ATX Switching Power Supply', Model E-500ATX. Other info it gives on the PSU is 230V, Current 10A and Frequency 50-60Hz. It also has some other info which I can supply if necessary. Putting the PC plug in the wall socket instead of the power strip seems like it might have reduced the load on the PC quite a bit: I think it sounds less stressed. it has been off for a while whilst I took the side panel off though, so I'll wait to see what happens before getting too excited. EDIT 3: hmm. So here's the latest: just playing TERA. The fan's running quite fast again. Hard to tell whether switching to the wall socket has made a difference in terms of strain on the PC: I don't know if one would expect it to. Still seems like it might have helped though. Oh and there didn't seem to be much dust in the PC, although I didn't disconnect any components. I'm still getting the glue type smell. ASIDE: reminds me of someone on a PC near me at the library once who was actually sniffing glue right there in front of everyone while on the PC and he started talking about how he was sniffing glue. lol. That's no joke. EDIT 4: So the questions now are: Question 1: Is the smell something I should sort out? (If so, how might I do this?) Question 2: is it necessary to take any steps to prevent blowing another fuse (and if so which step/s?).

  Read the article

• Windows 7 is stuck at "Starting Windows" when I attempt to boot computer

  - by Eli

  Basically, whenever I turn on my computer, it gets to the Starting Windows phase and just stays there. The startup animation still plays, yet it gets nowhere. I have tried booting into safe mode, however it gets stuck at loading CLASSPNP.SYS. It then freezes there and doesn't continue booting. I have tried booting into recovery mode from the hard drive, and it freezes after displaying the background image. I have tried booting from a recovery CD, which works, and I was able to use system restore. However, using system restore did not fix it, and it still is stuck at the Starting Windows screen. I have tried booting a Windows CD (Windows 8 Retail Installer) to see if I could upgrade it to fix this issue, however that froze at a blank screen after it got past the boot logo. I have tried changing around the BIOS settings (including resetting), to no avail. I have tried re-plugging the internal PSU cables (this is a custom-built desktop), yet this has changed nothing. I can boot into a loopback Ubuntu install on the same drive, which works fine, other than the fact that it has issues with some of the USB ports and the network card. This system has worked fine for the past few months, completely stable, and nothing in the configuration has changed before this error started happening. Startup Repair on the Windows recovery CD doesn't find any issues. Unplugging my secondary hard drive or swapping around memory doesn't change anything. The hard drive itself is fine, it hasn't shown any signs of failure and once again, boots my other OS fine. If anyone could help with this, that would be great. I can't seem to find any possible solution to this. If it makes any difference, my system specs are as follows: AMD FX-8320 Gigabyte GA-970A-D3 4GB of DDR3 Radeon HD 6870 550w PSU I'd like to not have to reinstall Windows, for I have more than a terabyte of data that I would have to back up if that becomes the only option. EDIT: I have since tried the following: Tried the solution involving restoring files from RegBackup, which changed nothing. Tried testing everything with Hiren's boot CD, everything comes back as fine. Tried disabling everything unnecessary in the BIOS and unplugging everything unneeded, it still hangs. Tried swapping out every possible combination of RAM, it still has the same result. The RAM is not at fault it seems Tried every GPU I own (which is many!) and it still hangs at the exact same place. Tried minimizing the power consumption as much as possible, even using an old PCI graphics card. It still hangs at the same place in the same way, signifying that it's not the PSU at fault. Tried resetting the BIOS again, still nothing. Tried every possible combination of BIOS options, even downclocking everything, it still hangs in the same spot. Tried upgrading the BIOS from version FB to FD, which changed nothing. Based on this, I would conclude the motherboard to be at fault. Are there any other possibilities? I don't want to spend $150 for a new motherboard. EDIT 2: This is what it gets stuck at when I try to boot into safe mode: Note the slight graphical corruption at the top of the screen. No matter how I set up the system, this seems to be there. In addition, either it has stopped booting into safe mode now, or it takes upwards of 2+ hours, and I haven't left it running for that long.

  Read the article

• All Xen domU LVM volumes corrupt after reboot

  - by zcs

  I'm running a Debian Squeeze dom0, and after rebooting it all 7 of my domUs have data corruption. Each is setup as ext3 partition directly on a separate lvm2 volume. None of the lvm volumes will mount; all have bad superblocks. I've tried e2fsck with each superblock to no avail. What else can I try? Each domU has two LVM volumes connected to it, one for the disk and one for swap. The disk is mounted at root, formatted as a normal ext3 partition as a xen-blk device. The volumes are never mounted outside of the guest OS. I'm running Ubuntu 11.04 using the instructions here. I'm not sure that they didn't shutdown properly, all I know is they were corrupt after I issues a clean 'reboot' on the dom0. Here's a sample Xen config file; the rest are the same except for name, vcpus, memory, vif and disk. name = 'load1' vcpus = 2 memory = 512 vif = ['bridge=prbr0', 'bridge=eth0'] disk = ['phy:/dev/VolGroup00/load1-disk,xvda,w','phy:/dev/VolGroup00/load1-swap,xvdb,w'] #============================================================================ # Debian Installer specific variables def check_bool(name, value): value = str(value).lower() if value in ('t', 'tr', 'tru', 'true'): return True return False global var_check_with_default def var_check_with_default(default, var, val): if val: return val return default xm_vars.var('install', use='Install Debian, default: false', check=check_bool) xm_vars.var("install-method", use='Installation method to use "cdrom" or "network" (default: network)', check=lambda var, val: var_check_with_default('network', var, val)) # install-method == "network" xm_vars.var("install-mirror", use='Debian mirror to install from (default: http://archive.ubuntu.com/ubuntu)', check=lambda var, val: var_check_with_default('http://archive.ubuntu.com/ubuntu', var, val)) xm_vars.var("install-suite", use='Debian suite to install (default: natty)', check=lambda var, val: var_check_with_default('natty', var, val)) # install-method == "cdrom" xm_vars.var("install-media", use='Installation media to use (default: None)', check=lambda var, val: var_check_with_default(None, var, val)) xm_vars.var("install-cdrom-device", use='Installation media to use (default: xvdd)', check=lambda var, val: var_check_with_default('xvdd', var, val)) # Common options xm_vars.var("install-arch", use='Debian mirror to install from (default: amd64)', check=lambda var, val: var_check_with_default('amd64', var, val)) xm_vars.var("install-extra", use='Extra command line options (default: None)', check=lambda var, val: var_check_with_default(None, var, val)) xm_vars.var("install-installer", use='Debian installer to use (default: network uses install-mirror; cdrom uses /install.ARCH)', check=lambda var, val: var_check_with_default(None, var, val)) xm_vars.var("install-kernel", use='Debian installer kernel to use (default: uses install-installer)', check=lambda var, val: var_check_with_default(None, var, val)) xm_vars.var("install-ramdisk", use='Debian installer ramdisk to use (default: uses install-installer)', check=lambda var, val: var_check_with_default(None, var, val)) xm_vars.check() if not xm_vars.env.get('install'): bootloader="/usr/sbin/pygrub" elif xm_vars.env['install-method'] == "network": import os.path print "Install Mirror: %s" % xm_vars.env['install-mirror'] print "Install Suite: %s" % xm_vars.env['install-suite'] if xm_vars.env['install-installer']: installer = xm_vars.env['install-installer'] else: installer = xm_vars.env['install-mirror']+"/dists/"+xm_vars.env['install-suite'] + \ "/main/installer-"+xm_vars.env['install-arch']+"/current/images" print "Installer: %s" % installer print print "WARNING: Installer kernel and ramdisk are not authenticated." print if xm_vars.env.get('install-kernel'): kernelurl = xm_vars.env['install-kernel'] else: kernelurl = installer + "/netboot/xen/vmlinuz" if xm_vars.env.get('install-ramdisk'): ramdiskurl = xm_vars.env['install-ramdisk'] else: ramdiskurl = installer + "/netboot/xen/initrd.gz" import urllib class MyUrlOpener(urllib.FancyURLopener): def http_error_default(self, req, fp, code, msg, hdrs): raise IOError("%s %s" % (code, msg)) urlopener = MyUrlOpener() try: print "Fetching %s" % kernelurl kernel, _ = urlopener.retrieve(kernelurl) print "Fetching %s" % ramdiskurl ramdisk, _ = urlopener.retrieve(ramdiskurl) except IOError, _: raise elif xm_vars.env['install-method'] == "cdrom": arch_path = { 'i386': "/install.386", 'amd64': "/install.amd" } if xm_vars.env['install-media']: print "Install Media: %s" % xm_vars.env['install-media'] else: raise OptionError("No installation media given.") if xm_vars.env['install-installer']: installer = xm_vars.env['install-installer'] else: installer = arch_path[xm_vars.env['install-arch']] print "Installer: %s" % installer if xm_vars.env.get('install-kernel'): kernelpath = xm_vars.env['install-kernel'] else: kernelpath = installer + "/xen/vmlinuz" if xm_vars.env.get('install-ramdisk'): ramdiskpath = xm_vars.env['install-ramdisk'] else: ramdiskpath = installer + "/xen/initrd.gz" disk.insert(0, 'file:%s,%s:cdrom,r' % (xm_vars.env['install-media'], xm_vars.env['install-cdrom-device'])) bootloader="/usr/sbin/pygrub" bootargs="--kernel=%s --ramdisk=%s" % (kernelpath, ramdiskpath) print "From CD" else: print "WARNING: Unknown install-method: %s." % xm_vars.env['install-method'] if xm_vars.env.get('install'): # Figure out command line if xm_vars.env['install-extra']: extras=[xm_vars.env['install-extra']] else: extras=[] # Reboot will just restart the installer since this file is not # reparsed, so halt and restart that way. extras.append("debian-installer/exit/always_halt=true") extras.append("--") extras.append("quiet") console="hvc0" try: if len(vfb) >= 1: console="tty0" except NameError, e: pass extras.append("console="+ console) extra = str.join(" ", extras) print "command line is \"%s\"" % extra root There are two LVM logical volumes connected to each VM. Here's the fdisk -l output for the disk volume: Disk /dev/VolGroup00/VMNAME-disk: 8589 MB, 8589934592 bytes 255 heads, 63 sectors/track, 1044 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00029c01 Device Boot Start End Blocks Id System /dev/VolGroup00/VMNAME-disk1 1 1045 8386560 83 Linux And the swap volume: Disk /dev/VolGroup00/VMNAME-swap: 536 MB, 536870912 bytes 37 heads, 35 sectors/track, 809 cylinders Units = cylinders of 1295 * 512 = 663040 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0004faae Device Boot Start End Blocks Id System /dev/VolGroup00/VMNAME-swap1 2 809 522240 82 Linux swap / Solaris Partition 1 has different physical/logical beginnings (non-Linux?): phys=(0, 32, 33) logical=(1, 21, 19) Partition 1 has different physical/logical endings: phys=(65, 36, 35) logical=(808, 4, 28)

  Read the article

• Build and migrated to software raid (mdadm) on GPT disk, now can't assemble array

  - by John H

  mdadm, gpt issues, unrecognized partitions. Simplified question: How do I get mdadm to recognize GPT partitions? I have been attempting to convert/copy my Ubuntu 11.10 OS from a single drive to software raid 1. I have done similar in the past, but in this case, I was adding in a drive that has been configured for GPT and I tried to work with that without fully looking into the implications. Currently, I have a non-booting mdadm RAID 1 array of /dev/md127 (the OS assigned that and it keeps picking up). I am booting off of live USB keys, currently System Rescue CD from sysresccd. While gdisk and parted can see all the partitions, most of the OS utilities do not, including mdadm. My main goal is just to make the raid array accessible so I can get pull the data and start fresh (without using GPT). /dev/md127 /dev/sda /dev/sda1 <- GPT type partition /dev/sda1 <- exists within the GPT part, member of md127 /dev/sda2 <- exists within the GPT part, empty /dev/sdb /dev/sdb1 <- GPT type partition /dev/sdb1 <- exists within the GPT part, member of md127 History: POINT A: The original OS was install on sda (actually /dev/sda6). I used a the Ubuntu live usb to add sdb. I got warning from fdisk about GPT so I used gdisk to create a raid partition (sdb1) and mdadm to create a raid1 mirror with a missing drive. I had many issues getting this working (including being unable to get grub to install) but I eventually got it to boot using grub on sda and /dev/md127 off of sdb. So at point A, I had copied my OS from sda6 to md127 on sdb. I then booted into a rescue mode and attempted to get a bootloader onto sdb, which failed. I then discovered my mistake: I had installed the raid onto sdb instead of sdb1, essentially overwriting the sdb1 partition. POINT B: I now had two copies of my data- one on md127/sdb, and one on sda. I destroyed data on sda and created a new GPT table on sda. I then created sda1 for the raid array, and sda2 for a scratch partition. I added sda1 into the raid array and let it rebuild. md127 now covered /dev/sdb and /dev/sda1 as fully active and synced. POINT C: I rebooted onto linux rescue again and was still able to access the raid array. I then removed /dev/sdb from the array and created /dev/sdb1 for the raid. I added sdb1 to the array and let it sync. I was able to mount and access /dev/md127 without issues. Once it completed, both /dev/sda1 and /dev/sdb1 were GPT partitions and actively syncing. POINT D (current): I rebooted again to test if the array would boot and grub failed to load. I booted off of my live thumb drive and found that I can no longer assemble the raid array. mdadm doesn't see the required partitions. -- root@freshdesk /root % uname -a Linux freshdesk 3.0.24-std251-amd64 #2 SMP Sat Mar 17 12:08:55 UTC 2012 x86_64 AMD Athlon(tm) II X4 645 Processor AuthenticAMD GNU/Linux === /proc/partitions and parted look good: root@freshdesk /root % cat /proc/partitions major minor #blocks name 7 0 301788 loop0 8 0 976762584 sda 8 1 732579840 sda1 8 2 244181703 sda2 8 16 732574584 sdb 8 17 732573543 sdb1 8 32 7876607 sdc 8 33 7873349 sdc1 (parted) print all Model: ATA ST31000528AS (scsi) Disk /dev/sda: 1000GB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 750GB 750GB ext4 2 750GB 1000GB 250GB Linux/Windows data Model: ATA SAMSUNG HD753LJ (scsi) Disk /dev/sdb: 750GB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 750GB 750GB ext4 Linux RAID raid Model: SanDisk SanDisk Cruzer (scsi) Disk /dev/sdc: 8066MB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 31.7kB 8062MB 8062MB primary fat32 boot, lba === # no sda2, and I double the sdb1 is the one shown in parted root@freshdesk /root % blkid /dev/loop0: TYPE="squashfs" /dev/sda1: UUID="75dd6c2d-f0a8-4302-9da4-792cc7d72355" TYPE="ext4" /dev/sdc1: LABEL="PENDRIVE" UUID="1102-3720" TYPE="vfat" /dev/sdb1: UUID="2dd89f15-65bb-ff88-e368-bf24bd0fce41" TYPE="linux_raid_member" root@freshdesk /root % mdadm -E /dev/sda1 mdadm: No md superblock detected on /dev/sda1. # this is probably a result of me attempting to force the array up, putting superblocks on the GPT partition root@freshdesk /root % mdadm -E /dev/sdb1 /dev/sdb1: Magic : a92b4efc Version : 0.90.00 UUID : 2dd89f15:65bbff88:e368bf24:bd0fce41 Creation Time : Fri Mar 30 19:25:30 2012 Raid Level : raid1 Used Dev Size : 732568320 (698.63 GiB 750.15 GB) Array Size : 732568320 (698.63 GiB 750.15 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 127 Update Time : Sat Mar 31 12:39:38 2012 State : clean Active Devices : 1 Working Devices : 2 Failed Devices : 1 Spare Devices : 1 Checksum : a7d038b3 - correct Events : 20195 Number Major Minor RaidDevice State this 2 8 17 2 spare /dev/sdb1 0 0 8 1 0 active sync /dev/sda1 1 1 0 0 1 faulty removed 2 2 8 17 2 spare /dev/sdb1 === root@freshdesk /root % mdadm -A /dev/md127 /dev/sda1 /dev/sdb1 mdadm: no recogniseable superblock on /dev/sda1 mdadm: /dev/sda1 has no superblock - assembly aborted root@freshdesk /root % mdadm -A /dev/md127 /dev/sdb1 mdadm: cannot open device /dev/sdb1: Device or resource busy mdadm: /dev/sdb1 has no superblock - assembly aborted

  Read the article

• Stream Media and Live TV Across the Internet with Orb

  - by DigitalGeekery

  Looking for a way to stream your media collection across the Internet? Or perhaps watch and record TV remotely? Today we are going to look at how to do all that and more with Orb. Requirements Windows XP / Vista / 7 or Intel based Mac w/ OS X 10.5 or later. 1 GB RAM or more Pentium 4 2.4 GHz or higher / AMD Athlon 3200+ Broadband connections TV Tuner for streaming and recording live TV (optional) Note: Slower internet connections may result in stuttering during playback. Installation and Setup Download and install Orb on your home computer. (Download link below) You’ll want to take the defaults for the initial portion of the install. When we get to the Orb Account setup portion of the install is when we will have to enter information and make some decisions. Choose your language and click Next. We’ll need to create and user account and password. A valid email address is required as we’ll need to confirm the account later. Click Next.   Now you’ll want to choose your media sources. Orb will automatically look for folders that may contain media files. You can add or remove folders click on the (+) or (-) buttons. To remove a folder, click on it once to select it from the list and then click the minus (-) button. To add a folder, click the plus (+) button and browse for the folder. You can add local folders as well as shared folders from networked computers and USB attached storage. Note: Both the host computer running Orb and the networked computer will need to be running to access shared network folders remotely. When you’ve selected all your media files, click Next. Orb will proceed to index your media files… When the indexing is complete, click Next. Orb TV Setup Note: Streaming Live TV to Macs is not currently supported. If you have a TV tuner card connected to your PC, you can opt to configure Orb to stream live or recorded TV. Click Next  to configure TV. Or, choose Skip if you don’t wish to configure Orb for TV.   If you have a Digital tuner card, type in your Zip Code and click Get List to pull your channel listings. Select a TV provider from the list and click Next. If not, click Skip.   You can select or deselect any channels by checking or un-checking the box to each channel. Select Auto Scan to let Orb find more channels or disable the ones with no reception. Click Next when finished.   Next choose an analog provider, if necessary, and click Next.   Select “Yes” or “No” for a set top box and click Next. Just as we did with the Digital tuner, select or deselect any channels by checking or un-checking the box to each channel. Select Auto Scan to let Orb find more channels or disable the ones with no reception. Click Next when finished.   Now we’re finished with the setup. Click Close. Accessing your Media Remotely Media files are accessed through a web-based interface. Before we go any further, however, we’ll need to confirm our username and password. Check your inbox for an email from Orb Networks. Click the enclosed confirmation link. You’ll be prompted to enter the username and password you selected in your browser then click Next.   Your account will be confirmed. Now, we’re ready to enjoy our media remotely. To get started, point your browser to the MyCast website from your remote computer. (See link below) Enter your credentials and click Log In. Once logged in, you’ll be presented with the MyCast Home screen. By default you’ll see a handful of “channels” such as a TV program guide, random audio and photos, video favorites, and weather. You can add, remove, or customize channels. To add additional channels, click on Add Channels at the top right…   …and select from the dropdown list. To access your full media libraries, click Open Application at the top left and select from one of the options. Live and Recorded TV If you have a TV tuner card you configured for Orb, you’ll see your program guide on the TV / Webcams screen. To watch or record a show, click on the program listing to bring up a detail box. Then click the red button to record, or the green button to play. When recording a show, you’ll see a pulsating red icon at the top right of the listing in the program guide. If you want to watch Live TV, you may be prompted to choose your media player, depending on your browser and settings. Playback should begin shortly.   Note for Windows Media Center Users If you try to stream live TV in Orb while Windows Media Center is running on your PC, you’ll get an error message. Click the Stop MediaCenter button and then try again.   Audio On the Audio screen, you’ll find your music files indexed by genre, artist, and album. You can play a selection by clicking once and then clicking the green play button, or by simply double-clicking.   Playback will begin in the default media player for the streaming format.   Video Video works essentially the same as audio. Click on a selection and press the green play button, or double-click on the video title. Video playback will begin in the default media player for the streaming format.   Streaming Formats You can change the default streaming format in the control panel settings. To access the Control Panel, click on Open Applications  and select Control Panel. You can also click Settings at the top right.   Select General from the drop down list and then click on the Streaming Formats tab. You are provided four options. Flash, Windows Media, .SDP, and .PLS.   Creating Playlists To create playlists, drag and drop your media title to the playlist work area on the right, or click Add to playlist on the top menu. Click Save when finished.    Sharing your Media Orb allows you to share media playlists across the Internet with friends and family. There are a few ways to accomplish this. We’ll start by click the Share button at the bottom of the playlist work area after you’ve compiled your playlist. You’ll be prompted to choose a method by which to share your playlist. You’ll have the option to share your playlist publicly or privately. You can share publically through links, blogs, or on your Orb public profile.  By choosing the Public Profile option, Orb will automatically create a profile page for you with a URL like http://public.orb.com/username that anyone can easily access on the Internet. The private sharing option allows you to invite friends by email and requires recipients to register with Orb. You can also give your playlist a custom name, or accept the auto-generated title. Click OK when finished. Users who visit your public profile will be able to view and stream any of your shared playlists to their computer or supported device.   Portable Media Devices and Smartphones Orb can stream media to many portable devices and 3G phones. Streaming audio is supported on the iPhone and iPod Touch through the Safari browser. However, video and live TV streaming requires the Orb Live iPhone App.  Orb Live is available in the App store for $9.99. To stream media to your portable device, go to the MyCast website in your mobile browser and login. Browse for your media or playlist. Make a selection and play the media. Playback will begin. We found streaming music to both the Droid and the iPhone to work quite nicely. Video playback on the Droid, however, left a bit to be desired. The video looked good, but the audio tended to be out of sync. System Tray Control Panel By default Orb runs in the system tray on start up. To access the System Tray Control Panel, right-click on the Orb icon in the system tray and select Control Panel. Login with your Orb username and  password and click OK.   From here you can add or remove media sources, add manage accounts, change your password, and more. If you’d rather not run Orb on Startup, click the General icon.   Unselect the checkbox next to Start Orb when the system starts. Conclusion It may seem like a lot of steps, but getting Orb up and running isn’t terribly difficult. Orb is available for both Windows and Intel based Macs. It also supports streaming to many Game Consoles such as the Wii, PS3, and XBox 360. If you are running Windows 7 on multiple computers, you may want to check out our write-up on how to stream music and video over the Internet with Windows Media Player 12. Downloads Download Orb Logon to MyCast Similar Articles Productive Geek Tips Stream Music and Video Over the Internet with Windows Media Player 12Enable Media Streaming in Windows Home Server to Windows Media PlayerStream Media from Windows 7 to XP with VLC Media PlayerShare Digital Media With Other Computers on a Home Network with Windows 7Automatically Start Windows 7 Media Center in Live TV Mode TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Looking for Good Windows Media Player 12 Plug-ins? Find Out the Celebrity You Resemble With FaceDouble Whoa ! Use Printflush to Solve Printing Problems Icelandic Volcano Webcams Open Multiple Links At One Go

  Read the article

• Solaris X86 64-bit Assembly Programming

  - by danx

  Solaris X86 64-bit Assembly Programming This is a simple example on writing, compiling, and debugging Solaris 64-bit x86 assembly language with a C program. This is also referred to as "AMD64" assembly. The term "AMD64" is used in an inclusive sense to refer to all X86 64-bit processors, whether AMD Opteron family or Intel 64 processor family. Both run Solaris x86. I'm keeping this example simple mainly to illustrate how everything comes together—compiler, assembler, linker, and debugger when using assembly language. The example I'm using here is a C program that calls an assembly language program passing a C string. The assembly language program takes the C string and calls printf() with it to print the string. AMD64 Register Usage But first let's review the use of AMD64 registers. AMD64 has several 64-bit registers, some special purpose (such as the stack pointer) and others general purpose. By convention, Solaris follows the AMD64 ABI in register usage, which is the same used by Linux, but different from Microsoft Windows in usage (such as which registers are used to pass parameters). This blog will only discuss conventions for Linux and Solaris. The following chart shows how AMD64 registers are used. The first six parameters to a function are passed through registers. If there's more than six parameters, parameter 7 and above are pushed on the stack before calling the function. The stack is also used to save temporary "stack" variables for use by a function. 64-bit Register Usage %rip Instruction Pointer points to the current instruction %rsp Stack Pointer %rbp Frame Pointer (saved stack pointer pointing to parameters on stack) %rdi Function Parameter 1 %rsi Function Parameter 2 %rdx Function Parameter 3 %rcx Function Parameter 4 %r8 Function Parameter 5 %r9 Function Parameter 6 %rax Function return value %r10, %r11 Temporary registers (need not be saved before used) %rbx, %r12, %r13, %r14, %r15 Temporary registers, but must be saved before use and restored before returning from the current function (usually with the push and pop instructions). 32-, 16-, and 8-bit registers To access the lower 32-, 16-, or 8-bits of a 64-bit register use the following: 64-bit register Least significant 32-bits Least significant 16-bits Least significant 8-bits %rax%eax%ax%al %rbx%ebx%bx%bl %rcx%ecx%cx%cl %rdx%edx%dx%dl %rsi%esi%si%sil %rdi%edi%di%axl %rbp%ebp%bp%bp %rsp%esp%sp%spl %r9%r9d%r9w%r9b %r10%r10d%r10w%r10b %r11%r11d%r11w%r11b %r12%r12d%r12w%r12b %r13%r13d%r13w%r13b %r14%r14d%r14w%r14b %r15%r15d%r15w%r15b %r16%r16d%r16w%r16b There's other registers present, such as the 64-bit %mm registers, 128-bit %xmm registers, 256-bit %ymm registers, and 512-bit %zmm registers. Except for %mm registers, these registers may not present on older AMD64 processors. Assembly Source The following is the source for a C program, helloas1.c, that calls an assembly function, hello_asm(). $ cat helloas1.c extern void hello_asm(char *s); int main(void) { hello_asm("Hello, World!"); } The assembly function called above, hello_asm(), is defined below. $ cat helloas2.s /* * helloas2.s * To build: * cc -m64 -o helloas2-cpp.s -D_ASM -E helloas2.s * cc -m64 -c -o helloas2.o helloas2-cpp.s */ #if defined(lint) || defined(__lint) /* ARGSUSED */ void hello_asm(char *s) { } #else /* lint */ #include <sys/asm_linkage.h> .extern printf ENTRY_NP(hello_asm) // Setup printf parameters on stack mov %rdi, %rsi // P2 (%rsi) is string variable lea .printf_string, %rdi // P1 (%rdi) is printf format string call printf ret SET_SIZE(hello_asm) // Read-only data .text .align 16 .type .printf_string, @object .printf_string: .ascii "The string is: %s.\n\0" #endif /* lint || __lint */ In the assembly source above, the C skeleton code under "#if defined(lint)" is optionally used for lint to check the interfaces with your C program--very useful to catch nasty interface bugs. The "asm_linkage.h" file includes some handy macros useful for assembly, such as ENTRY_NP(), used to define a program entry point, and SET_SIZE(), used to set the function size in the symbol table. The function hello_asm calls C function printf() by passing two parameters, Parameter 1 (P1) is a printf format string, and P2 is a string variable. The function begins by moving %rdi, which contains Parameter 1 (P1) passed hello_asm, to printf()'s P2, %rsi. Then it sets printf's P1, the format string, by loading the address the address of the format string in %rdi, P1. Finally it calls printf. After returning from printf, the hello_asm function returns itself. Larger, more complex assembly functions usually do more setup than the example above. If a function is returning a value, it would set %rax to the return value. Also, it's typical for a function to save the %rbp and %rsp registers of the calling function and to restore these registers before returning. %rsp contains the stack pointer and %rbp contains the frame pointer. Here is the typical function setup and return sequence for a function: ENTRY_NP(sample_assembly_function) push %rbp // save frame pointer on stack mov %rsp, %rbp // save stack pointer in frame pointer xor %rax, %r4ax // set function return value to 0. mov %rbp, %rsp // restore stack pointer pop %rbp // restore frame pointer ret // return to calling function SET_SIZE(sample_assembly_function) Compiling and Running Assembly Use the Solaris cc command to compile both C and assembly source, and to pre-process assembly source. You can also use GNU gcc instead of cc to compile, if you prefer. The "-m64" option tells the compiler to compile in 64-bit address mode (instead of 32-bit). $ cc -m64 -o helloas2-cpp.s -D_ASM -E helloas2.s $ cc -m64 -c -o helloas2.o helloas2-cpp.s $ cc -m64 -c helloas1.c $ cc -m64 -o hello-asm helloas1.o helloas2.o $ file hello-asm helloas1.o helloas2.o hello-asm: ELF 64-bit LSB executable AMD64 Version 1 [SSE FXSR FPU], dynamically linked, not stripped helloas1.o: ELF 64-bit LSB relocatable AMD64 Version 1 helloas2.o: ELF 64-bit LSB relocatable AMD64 Version 1 $ hello-asm The string is: Hello, World!. Debugging Assembly with MDB MDB is the Solaris system debugger. It can also be used to debug user programs, including assembly and C. The following example runs the above program, hello-asm, under control of the debugger. In the example below I load the program, set a breakpoint at the assembly function hello_asm, display the registers and the first parameter, step through the assembly function, and continue execution. $ mdb hello-asm # Start the debugger > hello_asm:b # Set a breakpoint > ::run # Run the program under the debugger mdb: stop at hello_asm mdb: target stopped at: hello_asm: movq %rdi,%rsi > $C # display function stack ffff80ffbffff6e0 hello_asm() ffff80ffbffff6f0 0x400adc() > $r # display registers %rax = 0x0000000000000000 %r8 = 0x0000000000000000 %rbx = 0xffff80ffbf7f8e70 %r9 = 0x0000000000000000 %rcx = 0x0000000000000000 %r10 = 0x0000000000000000 %rdx = 0xffff80ffbffff718 %r11 = 0xffff80ffbf537db8 %rsi = 0xffff80ffbffff708 %r12 = 0x0000000000000000 %rdi = 0x0000000000400cf8 %r13 = 0x0000000000000000 %r14 = 0x0000000000000000 %r15 = 0x0000000000000000 %cs = 0x0053 %fs = 0x0000 %gs = 0x0000 %ds = 0x0000 %es = 0x0000 %ss = 0x004b %rip = 0x0000000000400c70 hello_asm %rbp = 0xffff80ffbffff6e0 %rsp = 0xffff80ffbffff6c8 %rflags = 0x00000282 id=0 vip=0 vif=0 ac=0 vm=0 rf=0 nt=0 iopl=0x0 status=<of,df,IF,tf,SF,zf,af,pf,cf> %gsbase = 0x0000000000000000 %fsbase = 0xffff80ffbf782a40 %trapno = 0x3 %err = 0x0 > ::dis # disassemble the current instructions hello_asm: movq %rdi,%rsi hello_asm+3: leaq 0x400c90,%rdi hello_asm+0xb: call -0x220 <PLT:printf> hello_asm+0x10: ret 0x400c81: nop 0x400c85: nop 0x400c88: nop 0x400c8c: nop 0x400c90: pushq %rsp 0x400c91: pushq $0x74732065 0x400c96: jb +0x69 <0x400d01> > 0x0000000000400cf8/S # %rdi contains Parameter 1 0x400cf8: Hello, World! > [ # Step and execute 1 instruction mdb: target stopped at: hello_asm+3: leaq 0x400c90,%rdi > [ mdb: target stopped at: hello_asm+0xb: call -0x220 <PLT:printf> > [ The string is: Hello, World!. mdb: target stopped at: hello_asm+0x10: ret > [ mdb: target stopped at: main+0x19: movl $0x0,-0x4(%rbp) > :c # continue program execution mdb: target has terminated > $q # quit the MDB debugger $ In the example above, at the start of function hello_asm(), I display the stack contents with "$C", display the registers contents with "$r", then disassemble the current function with "::dis". The first function parameter, which is a C string, is passed by reference with the string address in %rdi (see the register usage chart above). The address is 0x400cf8, so I print the value of the string with the "/S" MDB command: "0x0000000000400cf8/S". I can also print the contents at an address in several other formats. Here's a few popular formats. For more, see the mdb(1) man page for details. address/S C string address/C ASCII character (1 byte) address/E unsigned decimal (8 bytes) address/U unsigned decimal (4 bytes) address/D signed decimal (4 bytes) address/J hexadecimal (8 bytes) address/X hexadecimal (4 bytes) address/B hexadecimal (1 bytes) address/K pointer in hexadecimal (4 or 8 bytes) address/I disassembled instruction Finally, I step through each machine instruction with the "[" command, which steps over functions. If I wanted to enter a function, I would use the "]" command. Then I continue program execution with ":c", which continues until the program terminates. MDB Basic Cheat Sheet Here's a brief cheat sheet of some of the more common MDB commands useful for assembly debugging. There's an entire set of macros and more powerful commands, especially some for debugging the Solaris kernel, but that's beyond the scope of this example. $C Display function stack with pointers $c Display function stack $e Display external function names $v Display non-zero variables and registers $r Display registers ::fpregs Display floating point (or "media" registers). Includes %st, %xmm, and %ymm registers. ::status Display program status ::run Run the program (followed by optional command line parameters) $q Quit the debugger address:b Set a breakpoint address:d Delete a breakpoint $b Display breakpoints :c Continue program execution after a breakpoint [ Step 1 instruction, but step over function calls ] Step 1 instruction address::dis Disassemble instructions at an address ::events Display events Further Information "Assembly Language Techniques for Oracle Solaris on x86 Platforms" by Paul Lowik (2004). Good tutorial on Solaris x86 optimization with assembly. The Solaris Operating System on x86 Platforms An excellent, detailed tutorial on X86 architecture, with Solaris specifics. By an ex-Sun employee, Frank Hofmann (2005). "AMD64 ABI Features", Solaris 64-bit Developer's Guide contains rules on data types and register usage for Intel 64/AMD64-class processors. (available at docs.oracle.com) Solaris X86 Assembly Language Reference Manual (available at docs.oracle.com) SPARC Assembly Language Reference Manual (available at docs.oracle.com) System V Application Binary Interface (2003) defines the AMD64 ABI for UNIX-class operating systems, including Solaris, Linux, and BSD. Google for it—the original website is gone. cc(1), gcc(1), and mdb(1) man pages.

  Read the article

• Is C# slower than VB.NET?

  - by Matt Winckler

  Believe it or not, despite the title, this is not a troll. Running some benchmarks this morning, my colleagues and I have discovered some strange things concerning performance, and I am wondering if we're doing something horribly wrong. We started out comparing C# vs. Delphi Prism calculating prime numbers, and found that Prism was about 30% faster. I figured maybe CodeGear did more optimization when generating IL (the exe was about twice as big as C#'s and had all sorts of different IL in it.) So I decided to write a test in VB.NET as well, assuming that Microsoft's compilers would end up writing essentially the same IL for each language. However, the result there was more shocking: C# was more than three times slower than VB running the same operations. The generated IL was different, but not extremely so, and I'm not good enough at reading it to understand the differences. As a fan of C#, this apparent slowness wounds me horribly, and I am left wondering: what in the world is going on here? Is it time to pack it all in and go write web apps in Ruby? ;-) I've included the code for each below--just copy it into a new VB or C# console app, and run. On my machine, VB finds 348513 primes in about 6.36 seconds. C# finds the same number of primes in 21.76 seconds. (I've got an Intel Core2 Quad Q6600 @2.4Ghz; on another Intel machine in the office the code for both runs much faster but the ratio is about the same; on an AMD machine here the timing is ~10 seconds for VB and ~13 for C#--much less difference, but C# is still always slower.) Both of the console applications were compiled in Release mode, but otherwise no project settings were changed from the defaults generated by Visual Studio 2008. Is it a generally-known fact that C#'s generated IL is worse than VB's? Or is this a strange edge case? Or is my code flawed somehow (most likely)? Any insights are appreciated. VB code Imports System.Diagnostics Module Module1 Private temp As List(Of Int32) Private sw As Stopwatch Private totalSeconds As Double Sub Main() serialCalc() End Sub Private Sub serialCalc() temp = New List(Of Int32)() sw = Stopwatch.StartNew() For i As Int32 = 2 To 5000000 testIfPrimeSerial(i) Next sw.Stop() totalSeconds = sw.Elapsed.TotalSeconds Console.WriteLine(String.Format("{0} seconds elapsed.", totalSeconds)) Console.WriteLine(String.Format("{0} primes found.", temp.Count)) Console.ReadKey() End Sub Private Sub testIfPrimeSerial(ByVal suspectPrime As Int32) For i As Int32 = 2 To Math.Sqrt(suspectPrime) If (suspectPrime Mod i = 0) Then Exit Sub End If Next temp.Add(suspectPrime) End Sub End Module C# Code using System; using System.Collections.Generic; using System.Linq; using System.Text; using System.Diagnostics; namespace FindPrimesCSharp { class Program { List<Int32> temp = new List<Int32>(); Stopwatch sw; double totalSeconds; static void Main(string[] args) { new Program().serialCalc(); } private void serialCalc() { temp = new List<Int32>(); sw = Stopwatch.StartNew(); for (Int32 i = 2; i <= 5000000; i++) { testIfPrimeSerial(i); } sw.Stop(); totalSeconds = sw.Elapsed.TotalSeconds; Console.WriteLine(string.Format("{0} seconds elapsed.", totalSeconds)); Console.WriteLine(string.Format("{0} primes found.", temp.Count)); Console.ReadKey(); } private void testIfPrimeSerial(Int32 suspectPrime) { for (Int32 i = 2; i <= Math.Sqrt(suspectPrime); i++) { if (suspectPrime % i == 0) return; } temp.Add(suspectPrime); } } }

  Read the article

• Why do we need different CPU architecture for server & mini/mainframe & mixed-core?

  - by claws

  Hello, I was just wondering what other CPU architectures are available other than INTEL & AMD. So, found List of CPU architectures on Wikipedia. It categorizes notable CPU architectures into following categories. Embedded CPU architectures Microcomputer CPU architectures Workstation/Server CPU architectures Mini/Mainframe CPU architectures Mixed core CPU architectures I was analyzing the purposes and have few doubts. I taking Microcomputer CPU (PC) architecture as reference and comparing others. Embedded CPU architecture: They are a completely new world. Embedded systems are small & do very specific task mostly real time & low power consuming so we do not need so many & such wide registers available in a microcomputer CPU (typical PC). In other words we do need a new small & tiny architecture. Hence new architecture & new instruction RISC. The above point also clarifies why do we need a separate operating system (RTOS). Workstation/Server CPU architectures I don't know what is a workstation. Someone clarify regarding the workstation. As of the server. It is dedicated to run a specific software (server software like httpd, mysql etc.). Even if other processes run we need to give server process priority therefore there is a need for new scheduling scheme and thus we need operating system different than general purpose one. If you have any more points for the need of server OS please mention. But I don't get why do we need a new CPU Architecture. Why cant Microcomputer CPU architecture do the job. Can someone please clarify? Mini/Mainframe CPU architectures Again I don't know what are these & what miniframes or mainframes used for? I just know they are very big and occupy complete floor. But I never read about some real world problems they are trying to solve. If any one working on one of these. Share your knowledge. Can some one clarify its purpose & why is it that microcomputer CPU archicture not suitable for it? Is there a new kind of operating system for this too? Why? Mixed core CPU architectures Never heard of these. If possible please keep your answer in this format: XYZ CPU architectures Purpose of XYZ Need for a new architecture. why can't current microcomputer CPU architecture work? They go upto 3GHZ & have upto 8 cores. Need for a new Operating System Why do we need a new kind of operating system for this kind of archictures?

  Read the article

• CodePlex Daily Summary for Saturday, May 31, 2014

  CodePlex Daily Summary for Saturday, May 31, 2014Popular ReleasesTooltip Web Preview: ToolTip Web Preview: Version 1.0Image View Slider: Image View Slider: This is a .NET component. We create this using VB.NET. Here you can use an Image Viewer with several properties to your application form. We wish somebody to improve freely. Try this out! Author : Steven Renaldo Antony Yustinus Arjuna Purnama Putra Andre Wijaya P Martin Lidau PBK GENAP 2014 - TI UKDWAspose for Apache POI: Missing Features of Apache POI WP - v 1.1: Release contain the Missing Features in Apache POI WP SDK in Comparison with Aspose.Words for dealing with Microsoft Word. What's New ?Following Examples: Insert Picture in Word Document Insert Comments Set Page Borders Mail Merge from XML Data Source Moving the Cursor Feedback and Suggestions Many more examples are yet to come here. Keep visiting us. Raise your queries and suggest more examples via Aspose Forums or via this social coding site.babelua: V1.5.6.0: V1.5.6.0 - 2014.5.30New feature: support quick-cocos2d-x project now; support text search in scripts folder now, you can use this function in Search Result Window;SEToolbox: 01.032.014 Release 1: Added fix when loading game Textures for icons causing 'Unable to read beyond the end of the stream'. Added new Resource Report, that displays all in game resources in a concise report. Added in temp directory cleaner, to keep excess files from building up. Fixed use of colors on the windows, to work better with desktop schemes. Adding base support for multilingual resources. This will allow loading of the Space Engineers resources to show localized names, and display localized date a...FileTable Services for Lightswitch: FileTable Services for Lightswitch version 1.0.4: 30 MAY 2014 version 1.0.4SqlFileTableDataSource changes: Updated Delete command to run in batch mode (Insert and Update commands already ran that way) Changed Update command to silently fail if an attempt is made to change something unchangeable (e.g., attempt to change IsFolder) FileNode changes: Made ID property editable, but not (by default) visible in Lightswitch (this is to allow the creator of a FileNode to specify its ID) Made IsFolder editable (this is to allow callers to more eas...HERB.IQ: HERB.IQ.0.7.6 UPGRADE (Windows) BETA 2: HERB.IQ.0.7.6 UPGRADE (Windows) BETA 2SQL Scripts to Improve DNN Performance: Turbo Scripts 0.8.7 for DNN 7.1.2 - 7.2.2: fixed a missing dbo/oq and a misspelled view nameIndonesian Red-Letter Day Calendar: Indonesian Red-Letter Day Calendar: This is a composite has been made by Microsoft Visual Studio 2013.Visual F# Tools: Daily Builds Preview 05-29-2014: This preview is released for use under a proprietary license.ClosedXML - The easy way to OpenXML: ClosedXML 0.71.2: More memory and performance improvements. Fixed an issue with pivot table field order.Magick.NET: Magick.NET 6.8.9.101: Magick.NET linked with ImageMagick 6.8.9.1. Breaking changes: - Int/short Set methods of WritablePixelCollection are now unsigned. - The Q16 build no longer uses HDRI, switch to the new Q16-HDRI build if you need HDRI.QuickMon: Version 3.13: 1. Adding an Audio/sound notifier that can be used to simply draw attention to the application of a warning pr error state is returned by a collector. 2. Adding a property for Notifiers so it can be set to 'Attended', 'Unattended' or 'Both' modes. 3. Adding a WCF method to remote agent host so the version can be checked remotely. 4. Adding some 'Sample' monitor packs to installer. Note: this release and the next release (3.14 aka Pie release) will have some breaking changes and will be incom...fnr.exe - Find And Replace Tool: 1.7: Bug fixes Refactored logic for encoding text values to command line to handle common edge cases where find/replace operation works in GUI but not in command line Fix for bug where selection in Encoding drop down was different when generating command line in some cases. It was reported in: https://findandreplace.codeplex.com/workitem/34 Fix for "Backslash inserted before dot in replacement text" reported here: https://findandreplace.codeplex.com/discussions/541024 Fix for finding replacing...VG-Ripper & PG-Ripper: VG-Ripper 2.9.59: changes NEW: Added Support for 'GokoImage.com' links NEW: Added Support for 'ViperII.com' links NEW: Added Support for 'PixxxView.com' links NEW: Added Support for 'ImgRex.com' links NEW: Added Support for 'PixLiv.com' links NEW: Added Support for 'imgsee.me' links NEW: Added Support for 'ImgS.it' linksXsemmel - XML Editor and Viewer: 29-MAY-2014: WINDOWS XP IS NO LONGER SUPPORTED If you need support for WinXP, download release 15-MAR-2014 instead. FIX: Some minor issues NEW: Better visualisation of validation issues NEW: Printing CHG: Disabled Jumplist CHG: updated to .net 4.5, WinXP NO LONGER SUPPORTEDPerformance Analyzer for Microsoft Dynamics: DynamicsPerf 1.20: Version 1.20 Improved performance in PERFHOURLYROWDATA_VW Fixed error handling encrypted triggers Added logic ACTIVITYMONITORVW to handle Context_Info for Dynamics AX 2012 and above with this flag set on AOS Added logic to optional blocking to handle Context_Info for Dynamics AX 2012 and above with this flag set on AOS Added additional queries for investigating blocking Added logic to collect Baseline capture data (NOTE: QUERY_STATS table has entire procedure cache for that db during...Toolbox for Dynamics CRM 2011/2013: XrmToolBox (v1.2014.5.28): XrmToolbox improvement XrmToolBox updates (v1.2014.5.28)Fix connecting to a connection with custom authentication without saved password Tools improvement New tool!Solution Components Mover (v1.2014.5.22) Transfer solution components from one solution to another one Import/Export NN relationships (v1.2014.3.7) Allows you to import and export many to many relationships Tools updatesAttribute Bulk Updater (v1.2014.5.28) Audit Center (v1.2014.5.28) View Layout Replicator (v1.2014.5.28) Scrip...Microsoft Ajax Minifier: Microsoft Ajax Minifier 5.10: Fix for Issue #20875 - echo switch doesn't work for CSS CSS should honor the SASS source-file comments JS should allow multi-line comment directivesKartris E-commerce: Kartris v2.6002: Minor release: Double check that Logins_GetList sproc is present, sometimes seems to get missed earlier if upgrading which can give error when viewing logins page Added CSV and TXT export option; this is not Google Products compatible, but can give a good base for creating a file for some other systems such as Amazon Fixed some minor combination and options issues to improve interface back and front Turn bitcoin and some other gateways off by default Minor CSS changes Fixed currenc...New Projectsbrute force ip blocker: Utility which will search registry for invalid login attempts and blocked IPs which are attempting BRUTE Force attacksChristofides heuristic: This class can solve salesman travel problem using the Christofides heuristic.CLR Toolbox (Reloaded): "CLR Toolbox (Reloaded)" is a refactored version of "CLR Toolbox" (https://clrtoolbox.codeplex.com) that is written in C# and that targets on .NET and Mono.CPU Frequency Tuner: Calculate approximate frequency of AMD CPU.DAS (Data Access Service) Constructor: A simple data access layer code generator. Actual implementation only connect to a SQL Server.Fancontroller: The Fancontroller is a little tray program for the Fujitsu-Siemens Xa 3530 notebook computer. It has Auto,Fast, Cruise, Low noise speed options.Fractal generator: This class can generate Mandelbrot and Julia set fractal images.igolder curve: We're students from Duta Wacana Chritstian University who built a component for VB.Net. This component draw the points using a formula that We made by ourselvesMDriven Getting started - WPF: This is the suggested starting point if you want to start a new WPF MDriven project. See more at capableobjects.comMegacpu: Megacpu it's a small system tray tool to start and switch between custom profiles created with Turion Power control.Mercator projection: This class can render geograpic coordinates with the mercator projection.modify the .dex: ??DEX?????My Common Portable Library: Notify Property ChangedNearest Neighbor and Voronoi cluster: Find nearest neighbor of a set of points and cluster the points using a voronoi diagram and a dendogram.Otaku Perfection: This is the source code for the game show called Otaku Perfection.Simplified Application Framework: Simplified Application FrameworkSQLSetupHelper: SQL Setup helper for .net application standup-timer-modified: ???????Android????standup-timer??????????，????????????????（???????????）。???????jni??.so?????????dex(odex)??????。Top Verses ( Ayat Emas ): Top Verses Component for VB.NET 2012 or aboveVi-AIO SearchBar: Vi – AIO Search Bar is a project from subject Component Oriented Programming in IT Faculty of Duta Wacana Christian University Yogyakarta.VK9 - .Net Vkontakte API Implementation: VK9 is library that allows you to easily work with official VK (Vkontakte) API in your Microsoft .NET application. ??????V1.0: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

  Read the article

• Summary of the Solaris 11 webcast's livechat QnA session

  - by Karoly Vegh

  This is a followup post to the previous summary on the "What's new with Solaris 11 since the launch" webcast. That webcast has had a chatroom for a live Questions and Answers session running. I went through the archive of those and compiled a list of some of the (IMHO) most relevant and most frequently asked questions, I'd like to share. This is the first part, covering the QnA of Session I and II of the webcast, in a followup post we can have a look of the rest of the sessions if required - let me know in the comments. Also, should you have questions, as usual, feel free to ask those there, too.  ...and here come the answered questions:  When will Exadata be based on Solaris in place of Oracle Enterprise Linux?Exadata offers both Solaris 11 or Oracle Enterprise Linux.  The choice can be made at deployment time based on your OS needs.What are all other benefits and futures avilable in solaris 11 (cloud O.S.) compared to cloud based Red Hat Linux and Windows?suggest you check out our cloud white paper for a view of this. Also the OTN Solaris 11 page has some good articles. Here are the links:  http://www.oracle.com/technetwork/server-storage/solaris11/documentation/o11-106-sol11-cloud-501066.pdf http://www.oracle.com/technetwork/server-storage/solaris11/overview/index.htmlWill 11.1 have a more complete IPS respository for Oracle and FOSS software?Yes, we are adding additional packages to the various package repositories. Since Solaris 11 was launched, both the Oracle Solaris Studio tools as well as Oracle Solaris Cluster have been made available along with numerous new FOSS packages. We will continue to be adding additional Oracle products and open source packages in the future. Will Exadata be based on Sparc in place of intel-amd x86 in next future ?We can't publically discuss futures, but we actually have a SPARC version of Exadata today, it's called SuperCluster, this is such a powerfull multipurpose system that it actually have multiple personalities built into one system: Exadata, Exalogic, and it can be a general purpose platform if you want. Have I understood this right? Livepatching KSplice-style is coming to Solaris 11 too?We're looking at that for certain types of Solaris patches in the future.Will there be a security framework like SST/JASS for Solaris 11?We can't talk about the future projects on a public forum, but we recognize the need for SST/JASS and want to address this as soon as possible. On the other side there are a whole bunch of "best practices" that are now embedded into Solaris 11 by default, so out of the box Solaris 11 should already address part of what SST/JASS gave you. (For example we did a lot of work on improving the auditing performance so that we can now have it turned on by default). On x86 can install VirtualBox in a Zone and use that to host other OSes.Yes, this was one of the first things we made sure would work when we acquired VirtualBox when we were still Sun Microsystems. If I have a Solaris 11 Control Domain on a T-series, can I run a Solaris 10 Ldom with Solaris 8 branded containers?Yes, you can.Is Oracle Solaris free or do we need to purchase?Solaris is free, the entitlement to run it comes either with a Sun system (new or historical) or for 3rd party systems the entitlement comes with a support contract. Note that for production use you will be expected to get a support contract. If you don't want to use the Solaris system (Sun or 3rd party) for production use (i.e. development) you can get an OTN license on the Oracle Technical Network website. Will encryption and deduplication both work on a share?This should work at the same time. What approaches does Solaris use to monitor usage?There are many different tools in Solaris to monitor usage. The main ones are the "stats" (vmstat, mpstat, prstat, ...), the kstat interface, and DTrace (to get details you couldn't see before). And then there are layered tools that can interface with these tools (Ops Center, BMC, CA, Tivoli, ...) Apart little-endian, big-endian how is it easy to port Solaris applications on Sparc to x86 and vice-versa ?Very easy. Except for certain hardware specific applications (those that utilize hardware specific drivers), all of the same Oracle Solaris APIs exist for all architectures. Is IPS based patching aware of the fact that zones can reside on ZFS and move from one physical server to another ?IPS is definitely aware of zones and uses ZFS to support boot environments for non-global zones in the same way that's used for the global zone. With respect to moving a zone from one physical server to another, Solaris 11 supports to the same zone attach/deattach method that was introduced in Solaris 10. Is vnic support in Ldoms planned?This is currently being investigated for a future LDOM release. Is it possible with the new patching system to build a system later with the same patch level as a system built a few months earlier?Yes, you can choose/define exactly which version should go to the system and it will always put the same bits in place. The technical answer is that you choose the version of the "entire" package you want on the system and the rest flows from there. Is it in the plans to allow zones to add/remove zpools to running zones dynamically in future updates?Work in this area is currently under investigation. Any plans to realese Solaris 11 source code? i.e. opensolaris?We currently can't comment on publicly releasing the source code. If you need/want this access please let your Oracle account team know. What about VirtualBox and Solaris11 for virtualization?Solaris 11 works great with VirtualBox, as both a client and a host system. Will Oracle DB software eventually be supplied as IPS packages? When?We don't have a date yet but this is actively being worked on. What are the new artifacts in Oracle Solaris 11 than the previous versions?There are quite a few actually. The best start is to look at our "Evaluate Solaris 11" page, and there you also can find a Transition Guide. http://www.oracle.com/technetwork/server-storage/solaris11/overview/evaluate-1530234.html So, this seems just like RedHat's YUM environment?IPS offers certain features beyond those in YUM or other packaging systems. For example, IPS works with ZFS and Solaris Boot Environments to provide a safe environment for software lifecycle management so that changes can be reverted by switching to an older boot environment. With Zones on solaris 11, can I do paravirtualitation?The great thing about zones is you don't *need* paravirtualization. You're making the same direct kernel calls that you would outside of a zone.  It's an incredibly significant performance win over hypervisor-based virtualization. Are zones/containers officially supported to run Oracle Databases?  EBIZ?Hi Calvin, the answer is yes, here is the support matrix for DB:  http://www.oracle.com/technetwork/database/virtualizationmatrix-172995.html I've found some nasty bugs in Solaris 11 (one of which today) that have been fixed in community forks (i.e., Illumos). Will Oracle ever restart collaboration with the community?We continue to work with the community, just not as open on all projects as we did before (For example IPS is an open project) and the source of more than half of the Solaris packages is posted on our opensource websites. I can't comment on what we will do in the future. And with regards to bugs please file them through the support organization and we will get them resolved. Is zpool vdev removal on-the fly now possible ?This issue is actively being investigated although we don't have a date for when this feature will be available. Is pgstat now the official replacement for corestat ?It's intended to provide similar functionality Where are the opensource website?For Oracle Solaris, visit http://www.oracle.com/technetwork/opensource/systems-solaris-1562786.html As a cloud-scale virtualization, is it going to be easier to move zones between machines? maybe even automatic in case of a hardware failure?Hi Gashaw, we already have customers that have implemented what they refer to as "flying zones" that they can move around very easily. They use Solaris Cluster to do this. What about VMware vMotion like feature?We have secure live migration with both Logical Domains on SPARC T series systems, and with Oracle VM on x86 systems. When running Solaris 10/11 on an enterprise server with a lot of zones, what are best practises commands to show the system is running fine? (has enough hardware resources). For example CPU / Memory / I/O / system load. What are the recommended values?For Solaris 11, look into the new zonestat(1M) command that provides a great deal of information about zone utilization. In addition, there is new work underway in providing additional observability in areas such as per-zone file system I/O. Java optimizations done with Solaris 11? For X86 platforms too? Where can I find more detail about this?There is lots of work that go into optimizing Java for Oracle Solaris 10 & 11 on both SPARC and x86. See http://www.oracle.com/technetwork/articles/servers-storage-dev/solarisforjavadevelop-168642.pdf What is meant by "ZFS Shadow Migration"?It's a way to migrate data from another file system to ZFS: http://docs.oracle.com/cd/E23824_01/html/E24456/filesystem-3.html Is flash archive available with S11?Flash archive is not.  There is a procedure for disaster recovery, and we're working on a modern archive-based deployment tool for a future update.  The disaster recovery tool is here: http://www.oracle.com/technetwork/articles/servers-storage-admin/o11-091-sol-dis-recovery-489183.html  You can also use Distribution Constructor to build common golden images. Will solaris 11 be available on the ODA soon?The idea's under evaluation -- we'll share your interest with the team. What steps can be taken to ensure that breaches of security are identified quickly?There are a number of tools, including the "bart" tool and "pkg verify" to ensure that software has not been compromised.  Solaris Audit can also be used to detect unauthorized access.  You can also use Immutable Zones to protect against compromise.  There are a wide variety of security tools, and I've covered only a few. What is the relation from solaris to java 7 speed optimization?There is constant work done between the Oracle Solaris and Java teams on performance optimizations. See http://docs.oracle.com/javase/7/docs/technotes/guides/vm/performance-enhancements-7.html for examples. What is the difference in the Solaris 11 installation compared to solaris 10 ? where i can find the document describing basic repository concepts ?The best place to start is: http://www.oracle.com/technetwork/server-storage/solaris11/index.html Hope you found the post useful. For questions, input, requests for the second half of the QnA, please find the comment section below.  -- charlie  

  Read the article

< Previous Page | 46 47 48 49 50 51  | Next Page >