Search Results

Search found 1565 results on 63 pages for 'can bus'.

Page 50/63 | < Previous Page | 46 47 48 49 50 51 52 53 54 55 56 57  | Next Page >

• Dell XPS 15 (L502x) sound problem

  - by lauramolenaar

  I have a problem with my sound on my Dell XPS 15. First, when I had Windows 7, my sound was pretty good (I have a JBL 2.1 speaker system with Waves Maxx audio), but since I installed Ubuntu 12.04 it sounded very cheap and as if I put my laptop in a tin can. I've already tried installing alsa-hda-dkms from the alsa-daily ppa (http://ppa.launchpad.net/ubuntu-audio-dev/alsa-daily) This is my audio controller: laura@laura-XPS-L502X:~$ lspci -v | grep -A7 -i audio 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) Subsystem: Dell Device 04b6 Flags: bus master, fast devsel, latency 0, IRQ 51 Memory at f1c00000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel I hope you can help me, and you can always ask me for more information. Result of aplay -l: **** List of PLAYBACK Hardware Devices **** card 0: PCH [HDA Intel PCH], device 0: ALC665 Analog [ALC665 Analog] Subdevices: 0/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 1: ALC665 Digital [ALC665 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 Result of aplay -L: default Playback/recording through the PulseAudio sound server sysdefault:CARD=PCH HDA Intel PCH, ALC665 Analog Default Audio Device front:CARD=PCH,DEV=0 HDA Intel PCH, ALC665 Analog Front speakers surround40:CARD=PCH,DEV=0 HDA Intel PCH, ALC665 Analog 4.0 Surround output to Front and Rear speakers surround41:CARD=PCH,DEV=0 HDA Intel PCH, ALC665 Analog 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=PCH,DEV=0 HDA Intel PCH, ALC665 Analog 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=PCH,DEV=0 HDA Intel PCH, ALC665 Analog 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=PCH,DEV=0 HDA Intel PCH, ALC665 Analog 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers iec958:CARD=PCH,DEV=0 HDA Intel PCH, ALC665 Digital IEC958 (S/PDIF) Digital Audio Output hdmi:CARD=PCH,DEV=0 HDA Intel PCH, HDMI 0 HDMI Audio Output dmix:CARD=PCH,DEV=0 HDA Intel PCH, ALC665 Analog Direct sample mixing device dmix:CARD=PCH,DEV=1 HDA Intel PCH, ALC665 Digital Direct sample mixing device dmix:CARD=PCH,DEV=3 HDA Intel PCH, HDMI 0 Direct sample mixing device dsnoop:CARD=PCH,DEV=0 HDA Intel PCH, ALC665 Analog Direct sample snooping device dsnoop:CARD=PCH,DEV=1 HDA Intel PCH, ALC665 Digital Direct sample snooping device dsnoop:CARD=PCH,DEV=3 HDA Intel PCH, HDMI 0 Direct sample snooping device hw:CARD=PCH,DEV=0 HDA Intel PCH, ALC665 Analog Direct hardware device without any conversions hw:CARD=PCH,DEV=1 HDA Intel PCH, ALC665 Digital Direct hardware device without any conversions hw:CARD=PCH,DEV=3 HDA Intel PCH, HDMI 0 Direct hardware device without any conversions plughw:CARD=PCH,DEV=0 HDA Intel PCH, ALC665 Analog Hardware device with all software conversions plughw:CARD=PCH,DEV=1 HDA Intel PCH, ALC665 Digital Hardware device with all software conversions plughw:CARD=PCH,DEV=3 HDA Intel PCH, HDMI 0 Hardware device with all software conversions

  Read the article

• Python PyBluez loses Bluetooth connection after a while

  - by Travis G.

  I am using Python to write a simple serial Bluetooth script that sends information about my computer stats periodically. The receiving device is a Sparkfun BlueSmirf Silver. The problem is that, after the script runs for a few minutes, it stops sending packets to the receiver and fails with the error: (11, 'Resource temporarily unavailable') Noticing that this inevitably happens, I added some code to automatically try to reopen the connection. However, then I get: Could not connect: (16, 'Device or resource busy') Am I doing something wrong with the connection? Do I need to occasionally reopen the socket? I'm not sure how to recover from this type of error. I understand that sometimes the port will be busy and a write operation is deferred to avoid blocking other processes, but I wouldn't expect the connection to fail so regularly. Any thoughts? Here is the script: import psutil import serial import string import time import bluetooth sampleTime = 1 numSamples = 5 lastTemp = 0 TEMP_CHAR = 't' USAGE_CHAR = 'u' SENSOR_NAME = 'TC0D' #gauges = serial.Serial() #gauges.port = '/dev/rfcomm0' #gauges.baudrate = 9600 #gauges.parity = 'N' #gauges.writeTimeout = 0 #gauges.open() filename = '/sys/bus/platform/devices/applesmc.768/temp2_input' def parseSensorsOutputLinux(output): return int(round(float(output) / 1000)) def connect(): while(True): try: gaugeSocket = bluetooth.BluetoothSocket(bluetooth.RFCOMM) gaugeSocket.connect(('00:06:66:42:22:96', 1)) break; except bluetooth.btcommon.BluetoothError as error: print "Could not connect: ", error, "; Retrying in 5s..." time.sleep(5) return gaugeSocket; gaugeSocket = connect() while(1): usage = psutil.cpu_percent(interval=sampleTime) sensorFile = open(filename) temp = parseSensorsOutputLinux(sensorFile.read()) try: #gauges.write(USAGE_CHAR) gaugeSocket.send(USAGE_CHAR) #gauges.write(chr(int(usage))) #write the first byte gaugeSocket.send(chr(int(usage))) #print("Wrote usage: " + str(int(usage))) #gauges.write(TEMP_CHAR) gaugeSocket.send(TEMP_CHAR) #gauges.write(chr(temp)) gaugeSocket.send(chr(temp)) #print("Wrote temp: " + str(temp)) except bluetooth.btcommon.BluetoothError as error: print "Caught BluetoothError: ", error time.sleep(5) gaugeSocket = connect() pass gaugeSocket.close() EDIT: I should add that this code connects fine after I power-cycle the receiver and start the script. However, it fails after the first exception until I restart the receiver. P.S. This is related to my recent question, Why is /dev/rfcomm0 giving PySerial problems?, but that was more about PySerial specifically with rfcomm0. Here I am asking about general rfcomm etiquette.

  Read the article

• Ubuntu 14.04 Failed to load module udlfb

  - by jar276705

  DisplayLink doesn't load and run. The adapter is recognized and /dev/FB1 is created. USB bus info: Bus 001 Device 006: ID 17e9:0198 DisplayLink Xorg.0.log: X.Org X Server 1.15.1 Release Date: 2014-04-13 [ 44708.386] X Protocol Version 11, Revision 0 [ 44708.389] Build Operating System: Linux 3.2.0-37-generic i686 Ubuntu [ 44708.392] Current Operating System: Linux rrl 3.13.0-24-generic #46-Ubuntu SMP Thu Apr 10 19:08:14 UTC 2014 i686 [ 44708.392] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-24-generic root=UUID=6b719a77-29e0-4668-8f16-57d0d3a73a3f ro quiet splash vt.handoff=7 [ 44708.399] Build Date: 16 April 2014 01:40:08PM [ 44708.402] xorg-server 2:1.15.1-0ubuntu2 (For technical support please see http://www.ubuntu.com/support) [ 44708.405] Current version of pixman: 0.30.2 [ 44708.412] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 44708.412] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 44708.427] (==) Log file: "/var/log/Xorg.0.log", Time: Thu May 1 09:38:27 2014 [ 44708.431] (==) Using config file: "/etc/X11/xorg.conf" [ 44708.434] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 44708.435] (==) ServerLayout "X.org Configured" [ 44708.435] (**) |-->Screen "DisplayLinkScreen" (0) [ 44708.435] (**) | |-->Monitor "DisplayLinkMonitor" [ 44708.435] (**) | |-->Device "DisplayLinkDevice" [ 44708.435] (**) |-->Screen "Screen0" (1) [ 44708.435] (**) | |-->Monitor "Monitor0" [ 44708.435] (**) | |-->Device "Card0" [ 44708.435] (**) |-->Input Device "Mouse0" [ 44708.435] (**) |-->Input Device "Keyboard0" [ 44708.435] (==) Automatically adding devices [ 44708.435] (==) Automatically enabling devices [ 44708.435] (==) Automatically adding GPU devices [ 44708.435] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 44708.435] Entry deleted from font path. [ 44708.435] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 44708.435] Entry deleted from font path. [ 44708.435] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 44708.435] Entry deleted from font path. [ 44708.435] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 44708.435] Entry deleted from font path. [ 44708.435] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 44708.435] Entry deleted from font path. [ 44708.435] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 44708.435] Entry deleted from font path. [ 44708.435] (**) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, built-ins, /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, built-ins [ 44708.435] (**) ModulePath set to "/usr/lib/xorg/modules" [ 44708.435] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled. [ 44708.435] (WW) Disabling Mouse0 [ 44708.435] (WW) Disabling Keyboard0 [ 44708.435] (II) Loader magic: 0xb77106c0 [ 44708.435] (II) Module ABI versions: [ 44708.435] X.Org ANSI C Emulation: 0.4 [ 44708.435] X.Org Video Driver: 15.0 [ 44708.435] X.Org XInput driver : 20.0 [ 44708.435] X.Org Server Extension : 8.0 [ 44708.436] (II) xfree86: Adding drm device (/dev/dri/card0) [ 44708.436] (II) xfree86: Adding drm device (/dev/dri/card1) [ 44708.437] (--) PCI:*(0:1:5:0) 1002:9616:105b:0e26 rev 0, Mem @ 0xf0000000/134217728, 0xfeae0000/65536, 0xfe900000/1048576, I/O @ 0x0000b000/256 [ 44708.441] Initializing built-in extension Generic Event Extension [ 44708.444] Initializing built-in extension SHAPE [ 44708.448] Initializing built-in extension MIT-SHM [ 44708.452] Initializing built-in extension XInputExtension [ 44708.456] Initializing built-in extension XTEST [ 44708.460] Initializing built-in extension BIG-REQUESTS [ 44708.464] Initializing built-in extension SYNC [ 44708.468] Initializing built-in extension XKEYBOARD [ 44708.471] Initializing built-in extension XC-MISC [ 44708.475] Initializing built-in extension SECURITY [ 44708.479] Initializing built-in extension XINERAMA [ 44708.483] Initializing built-in extension XFIXES [ 44708.487] Initializing built-in extension RENDER [ 44708.491] Initializing built-in extension RANDR [ 44708.494] Initializing built-in extension COMPOSITE [ 44708.498] Initializing built-in extension DAMAGE [ 44708.502] Initializing built-in extension MIT-SCREEN-SAVER [ 44708.506] Initializing built-in extension DOUBLE-BUFFER [ 44708.510] Initializing built-in extension RECORD [ 44708.513] Initializing built-in extension DPMS [ 44708.517] Initializing built-in extension Present [ 44708.521] Initializing built-in extension DRI3 [ 44708.525] Initializing built-in extension X-Resource [ 44708.528] Initializing built-in extension XVideo [ 44708.532] Initializing built-in extension XVideo-MotionCompensation [ 44708.535] Initializing built-in extension SELinux [ 44708.539] Initializing built-in extension XFree86-VidModeExtension [ 44708.542] Initializing built-in extension XFree86-DGA [ 44708.546] Initializing built-in extension XFree86-DRI [ 44708.549] Initializing built-in extension DRI2 [ 44708.549] (II) "glx" will be loaded. This was enabled by default and also specified in the config file. [ 44708.549] (WW) "xmir" is not to be loaded by default. Skipping. [ 44708.549] (II) LoadModule: "glx" [ 44708.549] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 44708.550] (II) Module glx: vendor="X.Org Foundation" [ 44708.550] compiled for 1.15.1, module version = 1.0.0 [ 44708.550] ABI class: X.Org Server Extension, version 8.0 [ 44708.550] (==) AIGLX enabled [ 44708.553] Loading extension GLX [ 44708.553] (II) LoadModule: "udlfb" [ 44708.554] (WW) Warning, couldn't open module udlfb [ 44708.554] (II) UnloadModule: "udlfb" [ 44708.554] (II) Unloading udlfb [ 44708.554] (EE) Failed to load module "udlfb" (module does not exist, 0) [ 44708.554] (II) LoadModule: "modesetting" [ 44708.554] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 44708.554] (II) Module modesetting: vendor="X.Org Foundation" [ 44708.554] compiled for 1.15.0, module version = 0.8.1 [ 44708.554] Module class: X.Org Video Driver [ 44708.554] ABI class: X.Org Video Driver, version 15.0 [ 44708.554] (==) Matched fglrx as autoconfigured driver 0 [ 44708.554] (==) Matched ati as autoconfigured driver 1 [ 44708.554] (==) Matched fglrx as autoconfigured driver 2 [ 44708.554] (==) Matched ati as autoconfigured driver 3 [ 44708.554] (==) Matched modesetting as autoconfigured driver 4 [ 44708.554] (==) Matched fbdev as autoconfigured driver 5 [ 44708.554] (==) Matched vesa as autoconfigured driver 6 [ 44708.554] (==) Assigned the driver to the xf86ConfigLayout [ 44708.554] (II) LoadModule: "fglrx" [ 44708.554] (WW) Warning, couldn't open module fglrx [ 44708.554] (II) UnloadModule: "fglrx" [ 44708.554] (II) Unloading fglrx [ 44708.554] (EE) Failed to load module "fglrx" (module does not exist, 0) [ 44708.554] (II) LoadModule: "ati" [ 44708.554] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so [ 44708.554] (II) Module ati: vendor="X.Org Foundation" [ 44708.554] compiled for 1.15.0, module version = 7.3.0 [ 44708.554] Module class: X.Org Video Driver [ 44708.554] ABI class: X.Org Video Driver, version 15.0 [ 44708.554] (II) LoadModule: "radeon" [ 44708.555] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so [ 44708.555] (II) Module radeon: vendor="X.Org Foundation" [ 44708.555] compiled for 1.15.0, module version = 7.3.0 [ 44708.555] Module class: X.Org Video Driver [ 44708.555] ABI class: X.Org Video Driver, version 15.0 [ 44708.555] (II) LoadModule: "modesetting" [ 44708.555] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 44708.555] (II) Module modesetting: vendor="X.Org Foundation" [ 44708.555] compiled for 1.15.0, module version = 0.8.1 [ 44708.555] Module class: X.Org Video Driver [ 44708.555] ABI class: X.Org Video Driver, version 15.0 [ 44708.555] (II) UnloadModule: "modesetting" [ 44708.555] (II) Unloading modesetting [ 44708.555] (II) Failed to load module "modesetting" (already loaded, 0) [ 44708.555] (II) LoadModule: "fbdev" [ 44708.555] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 44708.555] (II) Module fbdev: vendor="X.Org Foundation" [ 44708.555] compiled for 1.15.0, module version = 0.4.4 [ 44708.555] Module class: X.Org Video Driver [ 44708.555] ABI class: X.Org Video Driver, version 15.0 [ 44708.555] (II) LoadModule: "vesa" [ 44708.555] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 44708.555] (II) Module vesa: vendor="X.Org Foundation" [ 44708.555] compiled for 1.15.0, module version = 2.3.3 [ 44708.555] Module class: X.Org Video Driver [ 44708.555] ABI class: X.Org Video Driver, version 15.0 [ 44708.555] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 44708.555] (II) RADEON: Driver for ATI Radeon chipsets: [ 44708.560] (II) FBDEV: driver for framebuffer: fbdev [ 44708.560] (II) VESA: driver for VESA chipsets: vesa [ 44708.560] (--) using VT number 7 [ 44708.578] (II) modesetting(0): using drv /dev/dri/card0 [ 44708.578] (II) modesetting(G0): using drv /dev/dri/card1 [ 44708.578] (WW) Falling back to old probe method for fbdev [ 44708.578] (II) Loading sub module "fbdevhw" [ 44708.578] (II) LoadModule: "fbdevhw" [ 44708.578] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 44708.578] (II) Module fbdevhw: vendor="X.Org Foundation" [ 44708.578] compiled for 1.15.1, module version = 0.0.2 [ 44708.578] ABI class: X.Org Video Driver, version 15.0 [ 44708.578] (WW) Falling back to old probe method for vesa [ 44708.578] (**) modesetting(0): Depth 16, (--) framebuffer bpp 16 [ 44708.578] (==) modesetting(0): RGB weight 565 [ 44708.578] (==) modesetting(0): Default visual is TrueColor [ 44708.578] (II) modesetting(0): ShadowFB: preferred YES, enabled YES [ 44708.608] (II) modesetting(0): Output VGA-0 using monitor section DisplayLinkMonitor [ 44708.610] (II) modesetting(0): Output DVI-0 has no monitor section [ 44708.640] (II) modesetting(0): EDID for output VGA-0 [ 44708.640] (II) modesetting(0): Manufacturer: ACR Model: 74 Serial#: 2483090993 [ 44708.640] (II) modesetting(0): Year: 2009 Week: 40 [ 44708.640] (II) modesetting(0): EDID Version: 1.3 [ 44708.640] (II) modesetting(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V [ 44708.640] (II) modesetting(0): Sync: Separate [ 44708.640] (II) modesetting(0): Max Image Size [cm]: horiz.: 53 vert.: 29 [ 44708.640] (II) modesetting(0): Gamma: 2.20 [ 44708.640] (II) modesetting(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display [ 44708.641] (II) modesetting(0): First detailed timing is preferred mode [ 44708.641] (II) modesetting(0): redX: 0.649 redY: 0.338 greenX: 0.289 greenY: 0.609 [ 44708.641] (II) modesetting(0): blueX: 0.146 blueY: 0.070 whiteX: 0.313 whiteY: 0.329 [ 44708.641] (II) modesetting(0): Supported established timings: [ 44708.641] (II) modesetting(0): 720x400@70Hz [ 44708.641] (II) modesetting(0): 640x480@60Hz [ 44708.641] (II) modesetting(0): 640x480@72Hz [ 44708.641] (II) modesetting(0): 640x480@75Hz [ 44708.641] (II) modesetting(0): 800x600@56Hz [ 44708.641] (II) modesetting(0): 800x600@60Hz [ 44708.641] (II) modesetting(0): 800x600@72Hz [ 44708.641] (II) modesetting(0): 800x600@75Hz [ 44708.641] (II) modesetting(0): 1024x768@60Hz [ 44708.641] (II) modesetting(0): 1024x768@70Hz [ 44708.641] (II) modesetting(0): 1024x768@75Hz [ 44708.641] (II) modesetting(0): 1280x1024@75Hz [ 44708.641] (II) modesetting(0): Manufacturer's mask: 0 [ 44708.641] (II) modesetting(0): Supported standard timings: [ 44708.641] (II) modesetting(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [ 44708.641] (II) modesetting(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337 [ 44708.641] (II) modesetting(0): #2: hsize: 1440 vsize 900 refresh: 60 vid: 149 [ 44708.641] (II) modesetting(0): #3: hsize: 1440 vsize 900 refresh: 75 vid: 3989 [ 44708.641] (II) modesetting(0): #4: hsize: 1600 vsize 1200 refresh: 60 vid: 16553 [ 44708.641] (II) modesetting(0): #5: hsize: 1680 vsize 1050 refresh: 60 vid: 179 [ 44708.641] (II) modesetting(0): Supported detailed timing: [ 44708.641] (II) modesetting(0): clock: 138.5 MHz Image Size: 531 x 298 mm [ 44708.641] (II) modesetting(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0 [ 44708.641] (II) modesetting(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1111 v_border: 0 [ 44708.641] (II) modesetting(0): Monitor name: H243H [ 44708.641] (II) modesetting(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 185 MHz [ 44708.641] (II) modesetting(0): Serial No: LEW0C0044002 [ 44708.641] (II) modesetting(0): EDID (in hex): [ 44708.641] (II) modesetting(0): 00ffffffffffff000472740031f60094 [ 44708.641] (II) modesetting(0): 2813010368351d78ea6085a6564a9c25 [ 44708.641] (II) modesetting(0): 125054afcf008180714f9500950fa940 [ 44708.641] (II) modesetting(0): b300010101011a3680a070381f403020 [ 44708.641] (II) modesetting(0): 3500132a2100001a000000fc00483234 [ 44708.642] (II) modesetting(0): 33480a20202020202020000000fd0038 [ 44708.642] (II) modesetting(0): 4c1f5312000a202020202020000000ff [ 44708.642] (II) modesetting(0): 004c45573043303034343030320a003c [ 44708.642] (II) modesetting(0): Printing probed modes for output VGA-0 [ 44708.642] (II) modesetting(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz UeP) [ 44708.642] (II) modesetting(0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP) [ 44708.642] (II) modesetting(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e) [ 44708.642] (II) modesetting(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e) [ 44708.642] (II) modesetting(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 44708.642] (II) modesetting(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e) [ 44708.642] (II) modesetting(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e) [ 44708.642] (II) modesetting(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 44708.642] (II) modesetting(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e) [ 44708.642] (II) modesetting(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e) [ 44708.642] (II) modesetting(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 44708.642] (II) modesetting(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e) [ 44708.642] (II) modesetting(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 44708.642] (II) modesetting(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 44708.642] (II) modesetting(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 44708.642] (II) modesetting(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 44708.642] (II) modesetting(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e) [ 44708.642] (II) modesetting(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 44708.642] (II) modesetting(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 44708.645] (II) modesetting(0): EDID for output DVI-0 [ 44708.645] (II) modesetting(0): Output VGA-0 connected [ 44708.645] (II) modesetting(0): Output DVI-0 disconnected [ 44708.645] (II) modesetting(0): Using user preference for initial modes [ 44708.645] (II) modesetting(0): Output VGA-0 using initial mode 1280x1024 [ 44708.645] (II) modesetting(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 44708.645] (==) modesetting(0): DPI set to (96, 96) [ 44708.645] (II) Loading sub module "fb" [ 44708.645] (II) LoadModule: "fb" [ 44708.645] (II) Loading /usr/lib/xorg/modules/libfb.so [ 44708.645] (II) Module fb: vendor="X.Org Foundation" [ 44708.645] compiled for 1.15.1, module version = 1.0.0 [ 44708.645] ABI class: X.Org ANSI C Emulation, version 0.4 [ 44708.645] (II) Loading sub module "shadow" [ 44708.645] (II) LoadModule: "shadow" [ 44708.646] (II) Loading /usr/lib/xorg/modules/libshadow.so [ 44708.646] (II) Module shadow: vendor="X.Org Foundation" [ 44708.646] compiled for 1.15.1, module version = 1.1.0 [ 44708.646] ABI class: X.Org ANSI C Emulation, version 0.4 [ 44708.646] (**) modesetting(G0): Depth 16, (--) framebuffer bpp 16 [ 44708.646] (==) modesetting(G0): RGB weight 565 [ 44708.646] (==) modesetting(G0): Default visual is TrueColor [ 44708.646] (II) modesetting(G0): ShadowFB: preferred NO, enabled NO [ 44708.727] (II) modesetting(G0): Output DVI-1-0 using monitor section DisplayLinkMonitor [ 44708.808] (II) modesetting(G0): EDID for output DVI-1-0 [ 44708.808] (II) modesetting(G0): Manufacturer: WDE Model: 1702 Serial#: 0 [ 44708.808] (II) modesetting(G0): Year: 2005 Week: 14 [ 44708.808] (II) modesetting(G0): EDID Version: 1.3 [ 44708.808] (II) modesetting(G0): Analog Display Input, Input Voltage Level: 0.700/0.700 V [ 44708.808] (II) modesetting(G0): Sync: Separate [ 44708.808] (II) modesetting(G0): Max Image Size [cm]: horiz.: 34 vert.: 27 [ 44708.808] (II) modesetting(G0): Gamma: 2.20 [ 44708.808] (II) modesetting(G0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display [ 44708.808] (II) modesetting(G0): Default color space is primary color space [ 44708.808] (II) modesetting(G0): First detailed timing is preferred mode [ 44708.808] (II) modesetting(G0): GTF timings supported [ 44708.808] (II) modesetting(G0): redX: 0.643 redY: 0.352 greenX: 0.283 greenY: 0.608 [ 44708.808] (II) modesetting(G0): blueX: 0.147 blueY: 0.102 whiteX: 0.313 whiteY: 0.329 [ 44708.808] (II) modesetting(G0): Supported established timings: [ 44708.808] (II) modesetting(G0): 720x400@70Hz [ 44708.808] (II) modesetting(G0): 640x480@60Hz [ 44708.808] (II) modesetting(G0): 640x480@67Hz [ 44708.808] (II) modesetting(G0): 640x480@72Hz [ 44708.808] (II) modesetting(G0): 640x480@75Hz [ 44708.808] (II) modesetting(G0): 800x600@56Hz [ 44708.808] (II) modesetting(G0): 800x600@60Hz [ 44708.808] (II) modesetting(G0): 800x600@72Hz [ 44708.808] (II) modesetting(G0): 800x600@75Hz [ 44708.808] (II) modesetting(G0): 832x624@75Hz [ 44708.808] (II) modesetting(G0): 1024x768@60Hz [ 44708.808] (II) modesetting(G0): 1024x768@70Hz [ 44708.808] (II) modesetting(G0): 1024x768@75Hz [ 44708.809] (II) modesetting(G0): 1280x1024@75Hz [ 44708.809] (II) modesetting(G0): Manufacturer's mask: 0 [ 44708.809] (II) modesetting(G0): Supported standard timings: [ 44708.809] (II) modesetting(G0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [ 44708.809] (II) modesetting(G0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337 [ 44708.809] (II) modesetting(G0): Supported detailed timing: [ 44708.809] (II) modesetting(G0): clock: 108.0 MHz Image Size: 338 x 270 mm [ 44708.809] (II) modesetting(G0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0 [ 44708.809] (II) modesetting(G0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0 [ 44708.809] (II) modesetting(G0): Ranges: V min: 50 V max: 75 Hz, H min: 30 H max: 82 kHz, PixClock max 145 MHz [ 44708.809] (II) modesetting(G0): Monitor name: WDE LCM-17v2 [ 44708.809] (II) modesetting(G0): Serial No: 0 [ 44708.809] (II) modesetting(G0): EDID (in hex): [ 44708.809] (II) modesetting(G0): 00ffffffffffff005c85021700000000 [ 44708.809] (II) modesetting(G0): 0e0f010368221b78ef8bc5a45a489b25 [ 44708.809] (II) modesetting(G0): 1a5054bfef008180714f010101010101 [ 44708.809] (II) modesetting(G0): 010101010101302a009851002a403070 [ 44708.809] (II) modesetting(G0): 1300520e1100001e000000fd00324b1e [ 44708.809] (II) modesetting(G0): 520e000a202020202020000000fc0057 [ 44708.809] (II) modesetting(G0): 4445204c434d2d313776320a000000ff [ 44708.809] (II) modesetting(G0): 00300a202020202020202020202000e7 [ 44708.809] (II) modesetting(G0): Printing probed modes for output DVI-1-0 [ 44708.809] (II) modesetting(G0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz UeP) [ 44708.809] (II) modesetting(G0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 44708.809] (II) modesetting(G0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 44708.809] (II) modesetting(G0): Modeline "1280x800"x74.9 106.50 1280 1360 1488 1696 800 803 809 838 -hsync +vsync (62.8 kHz e) [ 44708.809] (II) modesetting(G0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz e) [ 44708.809] (II) modesetting(G0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 44708.809] (II) modesetting(G0): Modeline "1280x768"x74.9 102.25 1280 1360 1488 1696 768 771 778 805 +hsync -vsync (60.3 kHz e) [ 44708.809] (II) modesetting(G0): Modeline "1280x768"x59.9 79.50 1280 1344 1472 1664 768 771 778 798 -hsync +vsync (47.8 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "1024x576"x60.0 46.97 1024 1064 1168 1312 576 577 580 597 -hsync +vsync (35.8 kHz) [ 44708.810] (II) modesetting(G0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 44708.810] (II) modesetting(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 44708.810] (==) modesetting(G0): DPI set to (96, 96) [ 44708.810] (II) Loading sub module "fb" [ 44708.810] (II) LoadModule: "fb" [ 44708.810] (II) Loading /usr/lib/xorg/modules/libfb.so [ 44708.810] (II) Module fb: vendor="X.Org Foundation" [ 44708.810] compiled for 1.15.1, module version = 1.0.0 [ 44708.811] ABI class: X.Org ANSI C Emulation, version 0.4 [ 44708.811] (II) UnloadModule: "radeon" [ 44708.811] (II) Unloading radeon [ 44708.811] (II) UnloadModule: "fbdev" [ 44708.811] (II) Unloading fbdev [ 44708.811] (II) UnloadSubModule: "fbdevhw" [ 44708.811] (II) Unloading fbdevhw [ 44708.811] (II) UnloadModule: "vesa" [ 44708.811] (II) Unloading vesa [ 44708.811] (==) modesetting(G0): Backing store enabled [ 44708.811] (==) modesetting(G0): Silken mouse enabled [ 44708.812] (II) modesetting(G0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 44708.812] (==) modesetting(G0): DPMS enabled [ 44708.812] (WW) modesetting(G0): Option "fbdev" is not used [ 44708.812] (==) modesetting(0): Backing store enabled [ 44708.812] (==) modesetting(0): Silken mouse enabled [ 44708.812] (II) modesetting(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 44708.812] (==) modesetting(0): DPMS enabled [ 44708.812] (WW) modesetting(0): Option "fbdev" is not used [ 44708.856] (--) RandR disabled [ 44708.867] (II) SELinux: Disabled on system [ 44708.868] (II) AIGLX: Screen 0 is not DRI2 capable [ 44708.868] (EE) AIGLX: reverting to software rendering [ 44708.878] (II) AIGLX: Loaded and initialized swrast [ 44708.878] (II) GLX: Initialized DRISWRAST GL provider for screen 0 [ 44708.879] (II) modesetting(G0): Damage tracking initialized [ 44708.879] (II) modesetting(0): Damage tracking initialized [ 44708.879] (II) modesetting(0): Setting screen physical size to 338 x 270 [ 44708.900] (II) XKB: generating xkmfile /tmp/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm [ 44708.918] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 44708.918] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 44708.918] (II) LoadModule: "evdev" [ 44708.918] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 44708.918] (II) Module evdev: vendor="X.Org Foundation" [ 44708.918] compiled for 1.15.0, module version = 2.8.2 [ 44708.918] Module class: X.Org XInput Driver [ 44708.918] ABI class: X.Org XInput driver, version 20.0 [ 44708.918] (II) Using input driver 'evdev' for 'Power Button' [ 44708.918] (**) Power Button: always reports core events [ 44708.918] (**) evdev: Power Button: Device: "/dev/input/event1" [ 44708.918] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 44708.918] (--) evdev: Power Button: Found keys [ 44708.918] (II) evdev: Power Button: Configuring as keyboard [ 44708.918] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1" [ 44708.918] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 44708.918] (**) Option "xkb_rules" "evdev" [ 44708.918] (**) Option "xkb_model" "pc105" [ 44708.918] (**) Option "xkb_layout" "us" [ 44708.919] (II) config/udev: Adding input device Power Button (/dev/input/event0) [ 44708.919] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 44708.919] (II) Using input driver 'evdev' for 'Power Button' [ 44708.919] (**) Power Button: always reports core events [ 44708.919] (**) evdev: Power Button: Device: "/dev/input/event0" [ 44708.919] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 44708.919] (--) evdev: Power Button: Found keys [ 44708.919] (II) evdev: Power Button: Configuring as keyboard [ 44708.919] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0" Is there anything I can do to fix this problem.

  Read the article

• NEC Corporation uPD720200 USB 3.0 controller doesn't run at full speed

  - by Radek Zyskowski

  I have fresh install of Ubuntu 10.10. I have external HD on USB 3.0. Trying to connect this via PCI Express NEC controller. dmesg: [ 8966.820078] usb 6-3: new high speed USB device using xhci_hcd and address 0 [ 8966.839831] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep [ 8966.840580] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep [ 8966.841329] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep [ 8966.842079] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep [ 8966.843343] scsi8 : usb-storage 6-3:1.0 [ 8967.847144] scsi 8:0:0:0: Direct-Access SAMSUNG HD204UI 1AQ1 PQ: 0 ANSI: 5 [ 8967.847589] sd 8:0:0:0: Attached scsi generic sg2 type 0 [ 8967.847923] sd 8:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 8967.848341] xhci_hcd 0000:02:00.0: WARN: Stalled endpoint [ 8967.850959] sd 8:0:0:0: [sdb] Write Protect is off [ 8967.850963] sd 8:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 8967.850966] sd 8:0:0:0: [sdb] Assuming drive cache: write through [ 8967.851818] xhci_hcd 0000:02:00.0: WARN: Stalled endpoint [ 8967.852365] sd 8:0:0:0: [sdb] Assuming drive cache: write through [ 8967.852370] sdb: sdb1 [ 8967.871315] xhci_hcd 0000:02:00.0: WARN: Stalled endpoint [ 8967.871853] sd 8:0:0:0: [sdb] Assuming drive cache: write through [ 8967.871856] sd 8:0:0:0: [sdb] Attached SCSI disk [ 8967.950728] xhci_hcd 0000:02:00.0: WARN: Stalled endpoint [ 8967.951355] sd 8:0:0:0: [sdb] Sense Key : Recovered Error [current] [descriptor] [ 8967.951361] Descriptor sense data with sense descriptors (in hex): [ 8967.951363] 72 01 04 1d 00 00 00 0e 09 0c 00 00 00 00 00 00 [ 8967.951375] 00 00 00 00 00 50 [ 8967.951380] sd 8:0:0:0: [sdb] ASC=0x4 ASCQ=0x1d [ 8968.790076] xhci_hcd 0000:02:00.0: HC died; cleaning up [ 8968.790076] usb 6-3: USB disconnect, address 2 [ 8999.008554] scsi 8:0:0:0: [sdb] Unhandled error code [ 8999.008558] scsi 8:0:0:0: [sdb] Result: hostbyte=DID_TIME_OUT driverbyte=DRIVER_OK [ 8999.008562] scsi 8:0:0:0: [sdb] CDB: Read(10): 28 00 74 70 97 39 00 00 3e 00 [ 8999.008573] end_request: I/O error, dev sdb, sector 1953535801 [ 8999.008578] Buffer I/O error on device sdb1, logical block 1953535738 [ 8999.008582] Buffer I/O error on device sdb1, logical block 1953535739 [ 8999.008585] Buffer I/O error on device sdb1, logical block 1953535740 [ 8999.008589] Buffer I/O error on device sdb1, logical block 1953535741 [ 8999.008592] Buffer I/O error on device sdb1, logical block 1953535742 [ 8999.008595] Buffer I/O error on device sdb1, logical block 1953535743 [ 8999.008600] Buffer I/O error on device sdb1, logical block 1953535744 [ 8999.008603] Buffer I/O error on device sdb1, logical block 1953535745 [ 8999.008606] Buffer I/O error on device sdb1, logical block 1953535746 [ 8999.008609] Buffer I/O error on device sdb1, logical block 1953535747 [ 8999.008642] scsi 8:0:0:0: rejecting I/O to offline device [ 8999.008747] scsi 8:0:0:0: [sdb] Unhandled error code [ 8999.008749] scsi 8:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 8999.008752] scsi 8:0:0:0: [sdb] CDB: Read(10): 28 00 74 70 97 77 00 00 3e 00 [ 8999.008760] end_request: I/O error, dev sdb, sector 1953535863 sudo lspci -v 2:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) (prog-if 30) Physical Slot: 32 Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at fe9fe000 (64-bit, non-prefetchable) [size=8K] Capabilities: [50] Power Management version 3 Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+ Capabilities: [90] MSI-X: Enable- Count=8 Masked- Capabilities: [a0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [140] Device Serial Number ff-ff-ff-ff-ff-ff-ff-ff Capabilities: [150] #18 Kernel driver in use: xhci_hcd Kernel modules: xhci-hcd If I try to put into this controller any USB 2.0, it works fine. But USB 3.0 nope. Any idea?

  Read the article

• no volume in kubuntu 10.04

  - by neha

  hello,I am having both gnome and kde on my system.as my gnome is working perfectly but in KDE is there is no sound being generated. output of apley -l and lspci commands is as follows.. neha@neha-laptop:~$ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 3: INTEL HDMI [INTEL HDMI] Subdevices: 1/1 Subdevice #0: subdevice #0 and output of lspci command is: neha@neha-laptop:~$ lspci 00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c) 00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c) 00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c) 00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02) 00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02) 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 02) 00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f2) 00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02) 02:09.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05) 02:09.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22) 02:09.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12) 02:09.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12) 02:09.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev ff) 09:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller (rev 12) 0b:00.0 Network controller: Broadcom Corporation BCM4312 802.11a/b/g (rev 01) can anyone help me??

  Read the article

• ath9k driver does not weak up

  - by shantanu

  I know this is common question but i found no suitable answer, so i am asking this again. I installed ubuntu 11.10. I found the bug for ath9k, so set first network boot from BIOS menu. That's worked. I have upgraded to 12.04 yesterday. Now ath9k is creating problem again. First network boot is still enable. ath9k works at start. But failed(connect again and again) after couple of minutes. dmesg show error that it can not weak up in 500us. So i tried #compat-wireless-3.5.1-1. But result is same. I have also added #nohwcrypt=1 option in /etc/modeprob.d/ath9k.conf. Still no luck. I tried #rmmod and then modprobe sudo modprobe ath9k nohwcrypt=1 dmesg shows me error: [ 400.690086] ath9k: Driver unloaded [ 406.214329] ath9k 0000:06:00.0: enabling device (0000 -> 0002) [ 406.214348] ath9k 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 406.214368] ath9k 0000:06:00.0: setting latency timer to 64 [ 406.428517] ath9k 0000:06:00.0: Failed to initialize device [ 406.428852] ath9k 0000:06:00.0: PCI INT A disabled [ 406.428887] ath9k: probe of 0000:06:00.0 failed with error -5 dmesg error when driver fail: 355.023521] ath: Chip reset failed [ 355.023524] ath: Unable to reset channel, reset status -22 [ 355.023556] ath: Unable to set channel [ 355.088569] ath: Failed to stop TX DMA, queues=0x10f! [ 355.122708] ath: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff [ 355.122714] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up [ 355.263962] ath: Chip reset failed [ 355.263966] ath: Unable to reset channel (2437 MHz), reset status -22 [ 358.996063] ath: Failed to wakeup in 500us [ 364.004182] ath: Failed to wakeup in 500us I can not install fresh ubuntu because i have lots of application installed. System : Acer Aspire 4250 AMD dual core 1.6GHZ Atheros Communications Inc. AR9485 Wireless Network Adapter (rev 01) EDITED Now i am in serious problem. No wifi device is not showing in ifconfig or lshw commands. Only ether-net interface shows. I tried (FN + WIFI) several times to enable the device but nothing helps. Now I have installed fresh ubuntu 12.04. Please help lshw -c network: *-network description: Ethernet interface product: 82566DC Gigabit Network Connection vendor: Intel Corporation physical id: 19 bus info: pci@0000:00:19.0 logical name: eth0 version: 02 serial: 00:19:d1:7a:8e:f9 size: 100Mbit/s capacity: 1Gbit/s width: 32 bits clock: 33MHz capabilities: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=2.0.0-k duplex=full firmware=1.1-0 ip=192.168.1.114 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:45 memory:90300000-9031ffff memory:90324000-90324fff ioport:20c0(size=32) rfkill command does not show anything but no error.

  Read the article

• top tweets SOA Partner Community – June 2013

  - by JuergenKress

  Send your tweets @soacommunity #soacommunity and follow us at http://twitter.com/soacommunity Oracle SOA Learn how Business Rules are used in Oracle SOA Suite. New free self-study course - Oracle Univ. #soa #oraclesoa http://pub.vitrue.com/ll9B OPITZ CONSULTING ?Wie #BPM und #SOA zusammengehören? Watch 100-Seconds-Video-Lesson by @Rolfbaer - http://ow.ly/luSjK @soacommunity Andrejus Baranovskis ?Customized BPM 11g PS6 Workspace Application http://fb.me/2ukaSBXKs Mark Nelson ?Case Management Samples Released http://wp.me/pgVeO-Lv Mark Nelson Instance Patching Demo for BPM 11.1.1.7 http://wp.me/pgVeO-Lx Simone Geib Antony Reynolds: Target Verification #oraclesoa https://blogs.oracle.com/reynolds/ OPITZ CONSULTING ?"It's all about Integration - Developing with Oracle #Cloud Services" @t_winterberg files: http://ow.ly/ljtEY #cloudworld @soacommunity Arun Pareek ?Functional Testing Business Processes In Oracle BPM Suite 11g http://wp.me/pkPu1-pc via @arrunpareek SOA Proactive Want to get started with Human Workflow? Check out the introductory video on OTN, http://pub.vitrue.com/enIL C2B2 Consulting Free tech workshop,London 6th of Jun Diagnosing Performance & Scalability Problems in Oracle SOASuite http://www.c2b2.co.uk/oracle_fusion_middleware_performance_seminar … @soacommunity Oracle BPM Must have technologies for delivering effective #CX : #BPM #Social #Mobile > #OracleBPM Whitepaper http://pub.vitrue.com/6pF6 OracleBlogs ?Introduction to Web Forms -Basic Tutorial http://ow.ly/2wQLTE OTNArchBeat ?Complete State of SOA podcast now available w/ @soacommunity @hajonormann @gschmutz @t_winterberg #industrialsoa http://pub.vitrue.com/PZFw Ronald Luttikhuizen VENNSTER Blog | Article published - Fault Handling and Prevention - Part 2 | http://blog.vennster.nl/2013/05/article-published-fault-handling-and.html … Mark Nelson ?Getting to know Maven http://wp.me/pgVeO-Lk gschmutz ?Cool! Our 2nd article has just been published: "Fault Handling and Prevention for Services in Oracle Service Bus" http://pub.vitrue.com/jMOy David Shaffer Interesting SOA Development and Delivery post on A-Team Redstack site - http://bit.ly/18oqrAI . Would be great to get others to contribute! Mark Nelson BPM PS6 video showing process lifecycle in more detail (30min) http://wp.me/pgVeO-Ko SOA Proactive ?Webcast: 'Introduction and Troubleshooting of the SOA 11g Database Adapter', May 9th. Register now at http://pub.vitrue.com/8In7 Mark Nelson ?SOA Development and Delivery http://wp.me/pgVeO-Kd Oracle BPM Manoj Das, VP Product Mangement talks about new #OracleBPM release #BPM #processmanagement http://pub.vitrue.com/FV3R OTNArchBeat Podcast: The State of SOA w/ @soacommunity @hajonormann @gschmutz @t_winterberg #industrialsoa http://pub.vitrue.com/OK2M gschmutz New article series on Industrial SOA started on OTN and Service Technology Magazine: http://guidoschmutz.wordpress.com/2013/04/22/first-two-chapters-of-industrial-soa-articles-series-have-been-published-both-on-otn-and-service-technology-magazine/ … #industrialSOA Danilo Schmiedel ?Article series #industrialSOA published on OTN and Service Technology Magazine http://inside-bpm-and-soa.blogspot.de/2013/04/industrial-soa_22.html … @soacommunity @OC_WIRE SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Facebook Wiki Mix Forum Technorati Tags: twitter,SOA Community,Oracle SOA,Oracle BPM,Community,OPN,Jürgen Kress

  Read the article

• DELL Inspiron 9400 SD Card Reader not working on 10.11 ubuntu

  - by Mario Martz

  Im new in linux, just installed Ubuntu 11.10 in a Dell Inspiron 9400, everything works fine with the exception of the SD card reader, everytime I insert a card the computer doesnt do anything, its like the SD card reader is not there. I did a $lspci and it shows the next drivers 03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller 03:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19) 03:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 0a) 03:01.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 05) Everytime I insert a memory card, dmesg shows the next d status 0x600b00 [ 2687.227351] end_request: I/O error, dev mmcblk0, sector 64 [ 2687.229436] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.229440] end_request: I/O error, dev mmcblk0, sector 65 [ 2687.230512] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.230515] end_request: I/O error, dev mmcblk0, sector 66 [ 2687.231588] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.231592] end_request: I/O error, dev mmcblk0, sector 67 [ 2687.232674] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.232678] end_request: I/O error, dev mmcblk0, sector 68 [ 2687.234763] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.234766] end_request: I/O error, dev mmcblk0, sector 69 [ 2687.236864] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.236868] end_request: I/O error, dev mmcblk0, sector 70 [ 2687.238942] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.238946] end_request: I/O error, dev mmcblk0, sector 71 [ 2687.238949] Buffer I/O error on device mmcblk0, logical block 8 [ 2687.241028] mmcblk0: retrying using single block read [ 2687.243104] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.243108] end_request: I/O error, dev mmcblk0, sector 64 [ 2687.245212] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.245215] end_request: I/O error, dev mmcblk0, sector 65 [ 2687.247298] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.247302] end_request: I/O error, dev mmcblk0, sector 66 [ 2687.248389] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.248393] end_request: I/O error, dev mmcblk0, sector 67 [ 2687.250476] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.250480] end_request: I/O error, dev mmcblk0, sector 68 [ 2687.252617] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 [ 2687.252621] end_request: I/O error, dev mmcblk0, sector 69 [ 2687.254737] mmcblk0: error -110 sending read/write command, response 0x0, card status 0x600b00 and more of the same but with different sector number Im using Kernel 3.0.0-12-generic By the way, when I was installing it and ubuntu asks about installation (If I want to install it along with windows or delete something or change the partitions of the HDD) if I go to the window to change the partition of the disc, linux detects the SD Card (if there's one inserted course). Any help with this it would be appreciated -sorry for my english Thank you

  Read the article

• Network is not working anymore - Ubuntu 12.04

  - by Jonathan

  Network is not working anymore - Ubuntu 12.04 Hello, I have a problem with my network connection. I have been using the same laptop with Ubuntu and the same connection for more than a year, and suddenly yesterday the connection stopped working (both wireless and wired). I've tested with another computer and the connection is fine (both wireless and wired). I've been reading similar posts but I haven't found a solution yet. I tried a few commands that I'm posting here (my system is in spanish, so I have traslated it to english, maybe the terms are not accurate): grep -i eth /var/log/syslog | tail Jun 3 18:45:40 vanesa-pc NetworkManager[3584]: (eth0): now managed Jun 3 18:45:40 vanesa-pc NetworkManager[3584]: (eth0): device state change: unmanaged - unavailable (reason 'managed') [10 20 2] Jun 3 18:45:40 vanesa-pc NetworkManager[3584]: (eth0): bringing up device. Jun 3 18:45:40 vanesa-pc NetworkManager[3584]: (eth0): preparing device. Jun 3 18:45:40 vanesa-pc kernel: [ 7351.845743] forcedeth 0000:00:0a.0: irq 41 for MSI/MSI-X Jun 3 18:45:40 vanesa-pc kernel: [ 7351.845984] forcedeth 0000:00:0a.0: eth0: no link during initialization Jun 3 18:45:40 vanesa-pc kernel: [ 7351.847103] ADDRCONF(NETDEV_UP): eth0: link is not ready Jun 3 18:45:40 vanesa-pc NetworkManager[3584]: (eth0): deactivating device (reason 'managed') [2] Jun 3 18:45:40 vanesa-pc NetworkManager[3584]: Added default wired connection 'Wired connection 1' for /sys/devices/pci0000:00/0000:00:0a.0/net/eth0 Jun 3 18:45:40 vanesa-pc kernel: [ 7351.848817] ADDRCONF(NETDEV_UP): eth0: link is not ready ifconfig -a eth0 Link encap:Ethernet addressHW 00:1b:24:fc:a8:d1 ACTIVE BROADCAST MULTICAST MTU:1500 Metric:1 Packages RX:0 errors:16 lost:0 overruns:0 frame:16 Packages TX:123 errors:0 lost:0 overruns:0 carrier:0 colissions:0 length.tailTX:1000 Bytes RX:0 (0.0 B) TX bytes:26335 (26.3 KB) Interruption:41 Base address: 0x2000 lo Link encap:Local loop Inet address:127.0.0.1 Mask:255.0.0.0 Inet6 address: ::1/128 Scope:Host ACTIVE LOOP WORKING MTU:16436 Metrics:1 Packages RX:1550 errors:0 lost:0 overruns:0 frame:0 Packages TX:1550 errors:0 lost:0 overruns:0 carrier:0 colissions:0 long.tailTX:0 Bytes RX:125312 (125.3 KB) TX bytes:125312 (125.3 KB) iwconfig lo no wireless extensions. eth0 no wireless extensions. sudo lshw -C network *-network description: Ethernet interface product: MCP67 Ethernet manufacturer: NVIDIA Corporation Physical id: a bus information: pci@0000:00:0a.0 logical name: eth0 version: a2 series: 00:1b:24:fc:a8:d1 capacity: 100Mbit/s width: 32 bits clock: 66MHz capacities: pm msi ht bus_master cap_list ethernet physical mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=forcedeth driverversion=0.64 latency=0 link=no maxlatency=20 mingnt=1 multicast=yes port=MII resources: irq:41 memoria:f6288000-f6288fff ioport:30f8(size=8) memoria:f6289c00-f6289cff memoria:f6289800-f628980f lsmod Module Size Used by usbhid 41906 0 hid 77367 1 usbhid rfcomm 38139 0 parport_pc 32114 0 ppdev 12849 0 bnep 17830 2 bluetooth 158438 10 rfcomm,bnep binfmt_misc 17292 1 joydev 17393 0 hp_wmi 13652 0 sparse_keymap 13658 1 hp_wmi nouveau 708198 3 ttm 65344 1 nouveau drm_kms_helper 45466 1 nouveau drm 197692 5 nouveau,ttm,drm_kms_helper i2c_algo_bit 13199 1 nouveau psmouse 87213 0 mxm_wmi 12859 1 nouveau serio_raw 13027 0 k8temp 12905 0 i2c_nforce2 12906 0 wmi 18744 2 hp_wmi,mxm_wmi video 19068 1 nouveau mac_hid 13077 0 lp 17455 0 parport 40930 3 parport_pc,ppdev,lp forcedeth 58096 0 Let me know if I can give you more information. Thank you very much in advance, Jonathan

  Read the article

• SOA Suite 11g Releases

  - by antony.reynolds

  A few years ago Mars renamed one of the most popular chocolate bars in England from Marathon to Snickers.  Even today there are still some people confused by the name change and refer to them as marathons. Well last week we released SOA Suite 11.1.1.3 and BPM Suite 11.1.1.3 as well as OSB 11.1.1.3.  Seems that some people are a little confused by the naming and how to install these new versions, probably the same Brits who call Snickers a Marathon :-).  Seems that calling all the revisions 11g Release 1 has caused confusion.  To help these people I have created a little diagram to show how you can get the latest version onto your machine.  The dotted lines indicate dependencies. Note that SOA Suite 11.1.1.3 and BPM 11.1.1.3 are provided as a patch that is applied to SOA Suite 11.1.1.2.  For a new install there is no need to run the 11.1.1.2 RCU, you can run the 11.1.1.3 RCU directly. All SOA & BPM Suite 11g installations are built on a WebLogic Server base.  The WebLogic 11g Release 1 version is 10.3 with an additional number indicating the revision.  Similarly the 11g Release 1 SOA Suite, Service Bus and BPM Suite have a version 11.1.1 with an additional number indicating the revision.  The final revision number should match the final revision in the WebLogic Server version.  The products are also sometimes identified by a Patch Set number, indicating whether this is the 11gR1 product with the first or second patch set.  The table below show the different revisions with their alias. Product Version Base WebLogic Alias SOA Suite 11gR1 11.1.1.1 10.3.1 Release 1 or R1 SOA Suite 11gR1 11.1.1.2 10.3.2 Patch Set 1 or PS1 SOA Suite 11gR1 11.1.1.3 10.3.3 Patch Set 2 or PS2 BPM Suite 11gR1 11.1.1.3 10.3.3 Release 1 or R1 OSB 11gR1 11.1.1.3 10.3.3 Release 1 or R1 Hope this helps some people, if you find it useful you could always send me a Marathon bar, sorry Snickers!

  Read the article

• AWS .NET SDK v2: the message-pump pattern

  - by Elton Stoneman

  Originally posted on: http://geekswithblogs.net/EltonStoneman/archive/2013/10/11/aws-.net-sdk-v2--the-message-pump-pattern.aspxVersion 2 of the AWS SDK for .NET has had a few pre-release iterations on NuGet and is stable, if a bit lacking in step-by-step guides. There’s at least one big reason to try it out: the SQS queue client now supports asynchronous reads, so you don’t need a clumsy polling mechanism to retrieve messages. The new approach  is easy to use, and lets you work with AWS queues in a similar way to the message-pump pattern used in the latest Azure SDK for Service Bus queues and topics. I’ve posted a simple wrapper class for subscribing to an SQS hub on gist here: A wrapper for the SQS client in the AWS SDK for.NET v2, which uses the message-pump pattern. Here’s the core functionality in the subscribe method: private async void Subscribe() { if (_isListening) { var request = new ReceiveMessageRequest { MaxNumberOfMessages = 10 }; request.QueueUrl = QueueUrl; var result = await _sqsClient.ReceiveMessageAsync(request, _cancellationTokenSource.Token); if (result.Messages.Count > 0) { foreach (var message in result.Messages) { if (_receiveAction != null && message != null) { _receiveAction(message.Body); DeleteMessage(message.ReceiptHandle); } } } } if (_isListening) { Subscribe(); } } which you call with something like this: client.Subscribe(x=>Log.Debug(x.Body)); The async SDK call returns when there is something in the queue, and will run your receive action for every message it gets in the batch (defaults to the maximum size of 10 messages per call). The listener will sit there awaiting messages until you stop it with: client.Unsubscribe(); Internally it has a cancellation token which it sets when you call unsubscribe, which cancels any in-flight call to SQS and stops the pump. The wrapper will also create the queue if it doesn’t exist at runtime. The Ensure() method gets called in the constructor so when you first use the client for a queue (sending or subscribing), it will set itself up: if (!Exists()) { var request = new CreateQueueRequest(); request.QueueName = QueueName; var response = _sqsClient.CreateQueue(request); QueueUrl = response.QueueUrl; } The Exists() check has to do make a call to ListQueues on the SNS client, as it doesn’t provide its own method to check if a queue exists. That call also populates the Amazon Resource Name, the unique identifier for this queue, which will be useful later. To use the wrapper, just instantiate and go: var queueClient = new QueueClient(“ProcessWorkflow”); queueClient.Subscribe(x=>Log.Debug(x.Body)); var message = {}; //etc. queueClient.Send(message);

  Read the article

• grub problem after grub-repair

  - by alireza

  I had two OS,win 7 and Ubuntu, I was working with win and went out of the room and when came back I saw Grub Rescue!!! I booted live and did grub_repaire and it still says multiple active partitions.operating system not found I feel that it can not find the ubuntu hard drive at all! ! ubuntu@ubuntu:/dev$ sudo fdisk -l Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xde771741 Device Boot Start End Blocks Id System /dev/sda1 * 61 61 0 0 Empty /dev/sda2 2048 30146559 15072256 27 Hidden NTFS WinRE /dev/sda3 * 30146560 30351359 102400 7 HPFS/NTFS/exFAT /dev/sda4 30351360 334483299 152065970 7 HPFS/NTFS/exFAT ubuntu@ubuntu:/dev$ ls autofs dvdrw loop4 ppp ram5 shm tty15 tty29 tty42 tty56 ttyS10 ttyS24 uinput vcsa1 block ecryptfs loop5 psaux ram6 snapshot tty16 tty3 tty43 tty57 ttyS11 ttyS25 urandom vcsa2 bsg fb0 loop6 ptmx ram7 snd tty17 tty30 tty44 tty58 ttyS12 ttyS26 usbmon0 vcsa3 btrfs-control fd loop7 pts ram8 sr0 tty18 tty31 tty45 tty59 ttyS13 ttyS27 usbmon1 vcsa4 bus full loop-control ram0 ram9 stderr tty19 tty32 tty46 tty6 ttyS14 ttyS28 usbmon2 vcsa5 cdrom fuse mapper ram1 random stdin tty2 tty33 tty47 tty60 ttyS15 ttyS29 v4l vcsa6 cdrw fw0 mcelog ram10 rfkill stdout tty20 tty34 tty48 tty61 ttyS16 ttyS3 vcs vcsa7 char hpet mei ram11 rtc tty tty21 tty35 tty49 tty62 ttyS17 ttyS30 vcs1 vga_arbiter console input mem ram12 rtc0 tty0 tty22 tty36 tty5 tty63 ttyS18 ttyS31 vcs2 video0 core kmsg net ram13 sda tty1 tty23 tty37 tty50 tty7 ttyS19 ttyS4 vcs3 zero cpu log network_latency ram14 sda2 tty10 tty24 tty38 tty51 tty8 ttyS2 ttyS5 vcs4 cpu_dma_latency loop0 network_throughput ram15 sda3 tty11 tty25 tty39 tty52 tty9 ttyS20 ttyS6 vcs5 disk loop1 null ram2 sda4 tty12 tty26 tty4 tty53 ttyprintk ttyS21 ttyS7 vcs6 dri loop2 oldmem ram3 sg0 tty13 tty27 tty40 tty54 ttyS0 ttyS22 ttyS8 vcs7 dvd loop3 port ram4 sg1 tty14 tty28 tty41 tty55 ttyS1 ttyS23 ttyS9 vcsa ubuntu@ubuntu:/dev$ someone said { Remove the boot flag from sda1, by typing in a terminal: sudo fdisk /dev/sda1 Then press the 'a' key, and 'Enter'. Then press the '1' key, and 'Enter'. Then press the 'w' key, and 'Enter'. } but after grub-repair I got this log: http://paste.ubuntu.com/1371297/ then I try sudo fdisk /dev/sda1 and But It says unable to open /dev/sda1! which is right as sda1 is not in dev folder (look at the picture!) Can anybody help me? I need to work on my windows for the rest of the semester and don't care of my ubuntu. thank you

  Read the article

• links for 2011-01-06

  - by Bob Rhubart

  Coming to your town: Oracle Enterprise Cloud Summit During these full-day events, cloud experts will share real-world best practices, reference architectures, detailed customer case studies, and more. Events scheduled in cities around the world.  (tags: oracle otn cloud event) Webcast: Security and Compliance for Private Cloud Consolidation Roxana Bradescu, Senior Director for Oracle Database Security Products, discusses Oracle Database Security Solutions to securely consolidate data and meet compliance requirements within private cloud computing environments. Thursday, January 13, 2011. 10am PST | 1pm EST (tags: oracle cloud security) Answering Questions about Mobile Devices | The AppsLab "How do the numbers of Android and iOS users compare? How often are people switching? Where are all these BlackBerry and Nokia users? Do they plan to jump to Android or iOS? What about webOS? Is it relevant?" Some answers in this AppsLab survey. (tags: oracle otn enterprise2.0 mobilecomputing iphone blackberry android) Webcast: Achieve 24/7 Cloud Availability Without Expensive Redundancy Ashish Ray and Matthew Baier discuss Oracle’s Maximum Availability Architecture and Oracle Database 11g. (tags: oracle cloud highavailability webcast) Converting a PV vm back into an HVM vm (Wim Coekaerts Blog) "I wanted to convert one of my VMs that was based on a paravirt kernel into a vm that just boots as a regular hardware virt VM with a standard x86-64 kernel...It took me a little while to figure out the fastest way so now that I have it pretty much down I wanted to share the steps." - Wim Coekaerts (tags: oracle otn virtualization oraclevm) @OTN_Garage: Resources for VirtualBox 4.0 Rick "@OTN_Garage" Ramsey shares links to several resources for those with a VirtualBox jones. (tags: oracle otn virtualization virtualbox) 'Federal Service Bus' Helps Belgian Government Speak a Common Language - SOA in Action Blog "The first SOA-enabled application was developed in less than two months and was fully operational in approximately 10 weeks. In addition, new FSB modules are reusable for other Belgian e-government applications, saving both time and taxpayer dollars." - Joe McKendrick (tags: soa oracle) Show Notes: Architects in the Cloud (ArchBeat Podcast) The complete 4-part interview with Stephen G. Bennett and Archie Reed, the authors of "Silver Clouds, Dark Linings: A Concise Guide to Cloud Computing," is now available. (tags: oracle otn cloud podcast archbeat)

  Read the article

• How to create wifihotspot in ubuntu 10.04 LTS

  - by aspdeepak

  I am using ubuntu 10.04 LTS in my lenovo laptop and have a android ICS device. I want to create a wifi-hotspot in ubuntu, which I can later use for connecting android device. I need this setup for capturing the packets from android device and later analysing them using wireshark in my ubuntu. I tried to create a new hotspot using "Create a new wireless Network" wizard from network manager applet, but for some reason the following happens. It breaks the existing internet connection(either the WLAN, or ethernet) Its not visible in the list of available WIFI hotspots in the android device. My Chipset information 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:03.0 Communication controller: Intel Corporation Mobile 4 Series Chipset MEI Controller (rev 07) 00:19.0 Ethernet controller: Intel Corporation 82567LF Gigabit Network Connection (rev 03) 00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) 00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03) 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03) 00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 03:00.0 Network controller: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection 15:00.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ba) 15:00.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 04) 15:00.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 21) 15:00.3 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev ff) 15:00.4 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 11) 15:00.5 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 11) Supported interface modes: * IBSS * managed * monitor

  Read the article

• Can't start Psychonauts game -- segfault

  - by tremby

  This looks similar to Psychonauts Humble Indie Bundle V error but I don't have the ERROR message (missing GL capability) and its solution does not work for me. When trying to run Psychonauts from the Humble Indie Bundle on my x86_64 laptop running Ubuntu 12.04 I get the following output: <bjn@segnus:/usr/local/games/psychonauts>$ ./Psychonauts STUBBED: fix up the rest of the SSE code first at DetectSSESupport (/home/icculus/projects/psychonauts/Source/CommonLibs/DFMath/MathGeneral.cpp:32) STUBBED: write me? at SetPCLanguage (/home/icculus/projects/psychonauts/Source/game/luatest/UnixMain.cpp:120) STUBBED: fix up the rest of the SSE code first at DetectCPUCaps (/home/icculus/projects/psychonauts/Source/game/luatest/Game/PCGameApp.cpp:223) STUBBED: check LANG envr var at _GetDefaultGameLanguage (/home/icculus/projects/psychonauts/Source/game/luatest/Game/GameApp.cpp:171) Console created Save path: /home/bjn/.local/share/Psychonauts Write path: WorkResource STUBBED: inline asm at SSEMul_4x4_4x4_2arg (/home/icculus/projects/psychonauts/Source/CommonLibs/DFMath/Matrix.cpp:710) STUBBED: inline asm at SSEMul_4x4_4x4_3arg (/home/icculus/projects/psychonauts/Source/CommonLibs/DFMath/Matrix.cpp:698) ******** unit test failed ******** STUBBED: VK_* at InitInputNames (/home/icculus/projects/psychonauts/Source/CommonLibs/DirectX/SDLInput.cpp:1220) No joysticks detected Transport started DaveD: NCListenSocket: Listening on port 40001 SDL_SetVideoMode() failed: Failed loading libGL.so.1 Start Up completed in 0.06 seconds [1] 9718 segmentation fault (core dumped) ./Psychonauts <bjn@segnus:/usr/local/games/psychonauts>$ Output of lspci: 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) 00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 03) 00:1f.2 RAID bus controller: Intel Corporation 82801 Mobile SATA Controller [RAID mode] (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 02:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05) 02:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22) 0c:00.0 Network controller: Intel Corporation WiFi Link 5100 Any ideas?

  Read the article

• Can not connect to wireless on 12.04 with Intel WiFi Link 5100

  - by WiData

  I am having problem in connecting to wifi. I have dual boot (Windows 7 and Ubuntu 12.04) on my Dell Studio 15. I upgraded to 12.04 quite some time ago (at least one month) from 11.10. Everything was working fine till yesterday. Since yesterday I can see the list of available Wifi connection but does not connect to any or if connects (after hours of trying) then disconnects after few minutes. My wifi interface is Intel WiFi Link 5100 AGN. However the problem is on both Windows and Ubuntu. Here are outputs of some commands which may be useful for those interested in helping: ~$ ifconfig eth0 Link encap:Ethernet HWaddr 00:22:19:fa:65:bb UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:794 errors:0 dropped:0 overruns:0 frame:0 TX packets:794 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:56280 (56.2 KB) TX bytes:56280 (56.2 KB) wlan0 Link encap:Ethernet HWaddr 00:22:fb:d2:fc:ce UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:239 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:53603 (53.6 KB) Here is the output for the command sudo lshw -C network *-network description: Wireless interface product: WiFi Link 5100 vendor: Intel Corporation physical id: 0 bus info: pci@0000:04:00.0 logical name: wlan0 version: 00 serial: 00:22:fb:d2:fc:ce width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.2.0-48-generic-pae firmware=8.83.5.1 build 33692 latency=0 link=no multicast=yes wireless=IEEE 802.11abgn resources: irq:47 memory:f8000000-f8001fff My kernel version is kernel version 3.2.0-48-generic-pae I also checked this post which was helpful. But I am not sure if what is the exact problem. Any suggestions will be helpful. Should I be changing the firmware/driver? Currently my /lib/firmware has following iwlwifi files /lib/firmware/iwlwifi-1000-5.ucode /lib/firmware/iwlwifi-5000-5.ucode /lib/firmware/iwlwifi-100-5.ucode /lib/firmware/iwlwifi-5150-2.ucode /lib/firmware/iwlwifi-105-6.ucode /lib/firmware/iwlwifi-6000-4.ucode /lib/firmware/iwlwifi-135-6.ucode /lib/firmware/iwlwifi-6000g2a-5.ucode /lib/firmware/iwlwifi-2000-6.ucode /lib/firmware/iwlwifi-6000g2a-6.ucode /lib/firmware/iwlwifi-2030-6.ucode /lib/firmware/iwlwifi-6000g2b-6.ucode /lib/firmware/iwlwifi-3945-2.ucode /lib/firmware/iwlwifi-6050-5.ucode /lib/firmware/iwlwifi-4965-2.ucode Thanks a lot for the help.

  Read the article

• ArchBeat Top 10 for November 18-24, 2012

  - by Bob Rhubart

  The Top 10 most popular items shared on the OTN ArchBeat Facebook page for the week of November 18-24, 2012. One-Stop Shop for over 200 On-Demand Oracle Webcasts Webcasts can be a great way to get information about Oracle products without having to go cross-eyed reading yet another document off your computer screen. Oracle's new Webcast Center offers selectable filtering to make it easy to get to the information you want. Yes, you have to register to gain access, but that process is quick, and with over 200 webcasts to choose from you know you'll find useful content. Oracle SOA Suite 11g PS 5 introduces BPEL with conditional correlation for aggregation scenarios | Lucas Jellema An extensive, detailed technical post from Oracle ACE Director Lucas Jellema. Oracle Utilities Application Framework V4.2.0.0.0 Released | Anthony Shorten Principal Product Manager Anthony Shorten shares an overview of the changes implemented in the new release. Fault Handling and Prevention - Part 1 | Guido Schmutz and Ronald van Luttikhuizen In this technical article, part one of a four part series, Oracle ACE Directors Guido Schmutz and Ronald van Luttikhuizen guide you through an introduction to fault handling in a service-oriented environment using Oracle SOA Suite and Oracle Service Bus. Oracle BPM Process Accelerators and process excellence | Andrew Richards "Process Accelerators are ready-to-deploy solutions based on best practices to simplify process management requirements," says Capgemini's Andrew Richards. "They are considered to be 'product grade,' meaning they have been designed; engineered, documented and tested by Oracle themselves to a level that they can be deployed as-is for a solution to a problem or extended as appropriate for a particular scenario." Videos: Getting Started with Java Embedded | The Java Source Interested in Java Embedded? You'll want to check out these videos provided Tori Weildt, including interviews with Oracle's James Allen and Kevin Smith, recorded at ARM TechCon. JPA SQL and Fetching tuning ( EclipseLink ) | Edwin Biemond Oracle ACE Edwin Biemond's post illustrates how to "use the department and employee entity of the HR Oracle demo schema to explain the JPA options you have to control the SQL statements and the JPA relation Fetching." Devoxx 2012 Trip Report - clouds and sunshine | Markus Eisele Oracle ACE Director Markus Eisele shares an extensive and entertaining account of his experience at Devoxx 2012. Towards Ultra-Reusability for ADF - Adaptive Bindings | Duncan Mills "The task flow mechanism embodies one of the key value propositions of the ADF Framework," says Duncan Mills. "However, what if we could do more? How could we make task flows even more re-usable than they are today?" As you might expect, Duncan has answers for those questions. Java Specification Requests in Numbers | Markus Eisele Oracle ACE Director Markus Eisele shares some interesting data culled from the Java Community Process site. Thought for the Day "You can't have great software without a great team, and most software teams behave like dysfunctional families." — Jim McCarthy Source: SoftwareQuotes.com

  Read the article

• VirtualBox image SOA Suite &amp; BPM Suite 11.1.1.6.0 & Your feedback?

  - by JuergenKress

  The integration PM team is very pleased to announce the release of a new version of our pre-configured SOA/BPM VirtualBox image for testing and evaluation. This VirtualBox appliance contains a fully configured, ready-to-use SOA/BPM/Webcenter 11.1.1.6.0 installation. All you need is to install Oracle VM VirtualBox on your desktop/laptop and import the SOA/BPM appliance and you are ready to try out SOA Suite and BPM Suite -- no installation and configuration required! The following software is installed in this VritualBox image: Oracle Enterprise Linux (64-bit) EL 5 Update 5 Oracle XE Database 11.2.0 Oracle SOA Suite 11.1.1.6.0 (includes Service Bus) Oracle BPM Suite 11.1.1.6.0 Oracle Webcenter Content (Enterprise Content Management) 11.1.1.6.0 Oracle Webcenter Suite 11.1.1.6.0 Oracle JDeveloper 11.1.1.6.0 JRockit R28.2.0-79-146777-1.6.0_29s Sun Java SDK 1.6.0_29-b11 If you want to try it out, please go to the Pre-built Virtual Machine for SOA Suite and BPM Suite 11g OTN page for detailed instructions on downloading and importing the VirtualBox image. Jon Petter Hjulstad published the first impression at his blog Twitter & LinkedIn We have been waiting for the new VirtualBox Image for a long time, and finally it is here. The appliance has improved in many ways since last release, so it has been worth waiting for. Both the appliance itself and the documentation is excellent. It is evident that Oracle has listened to feedback on the previous release, and I think the developer VMs are useful. Especially the adoption of new patchsets and versions (ex when 12c will be available) will gain a lot from quick getting hands-on experiences. This VirtualBox appliance is a multipurpose image which can be used in different domain configurations. The image has a number of pre-configured domains that you can use depending on your need. The image can be set up so that it requires use of as few resources as possible, you can for instance easily disable B2B if you do not need it, or you can shut down the desktop console and save 600MB. It is important to say that this image is not for production purposes. Read the full article SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit  www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix ForumTechnorati Tags: SOA Suite Image,VirtualBox,BPM suite Image,SOA Specialization award,SOA Community,Oracle SOA,Oracle BPM,BPM Community,OPN,Jürgen Kress

  Read the article

• ArchBeat Link-o-Rama for 2012-06-07

  - by Bob Rhubart

  Exalogic Webcast Series: Rethink Your Business Application Deployment Strategy Learn best practices for simplifying IT operations while delivering the application performance that a business needs. These on-demand Sessions include: Faster and Easier: Deploying ERP Applications on Oracle Exalogic Redefining the CRM and E-Commerce Experience with Oracle Exalogic The Road to a Cloud-Enabled, Infinitely Elastic Application Infrastructure Virtualization at Oracle - Six Part Series Links to all six articles in the series by Matthias Pfuetzner and Detlef Drewanz, spanning SPARC and x86. WebCenter Content shared folders for clustering | Kyle Hatlestad A-Team blogger Kyle Hatlestad shares the details on "how the file systems should be split and what options are required." Eclipse DemoCamp - June 2012 - Redwood Shores, CA When: Wednesday, June 13, 2012. 6:00pm - 9:00pm Where: Oracle HQ - 10 Twin Dolphin Drive, Redwood Shores, CA Presentations: The evolution of Java persistence, Doug Clarke, EclipseLink Project Lead, Oracle Integrating BIRT into Applications, Ashwini Verma, Actuate Corporation Developing Rich ADF Applications with Java EE, Greg Stachnick, Oracle Leveraging OSGi In The Enterprise, Kamal Muralidharan, Lead Engineer, eBay NVIDIA® NsightTM Eclipse Edition, Goodwin (Tech lead - Visual tools), Eugene Ostroukhov (Senior engineer – Visual tools) BI Architecture Master Class for Partners - Oracle Architecture Unplugged When:June 21, 2012 Where: City Office, London, UK This workshop will be highly interactive and is aimed at Oracle OPN member partners who are IT Architects and BI+W specialists. This will be a highly interactive session and does not involve slide presentations or product feature details, it addresses IT-Architectural issues and considerations for the IT-Architect Community. Oracle Fusion Middleware Innovation Awards | Oracle Excellence Awards Share your use of Oracle Fusion Middleware solutions and how they help your organization drive business innovation. You just might win a free pass to Oracle Openworld 2012 in San Francisco. Deadline for submissions in July 17, 2012. Oracle Service Bus 11g: listing projects and services with WLST - part 1 | Michel Schildmeijer "For automating and repetitive purposes, as well for uniformity it's always good to have some scripting," says Michel Schildmeijer. Creating an Oracle Endeca Information Discovery 2.3 Application Part 3 : Creating the User Interface | Mark Rittman Oracle ACE Director Mark Rittman continues his article series. WebLogic Advisor WebCasts On-Demand A series of videos by WebLogic experts, available to those with access to support.oracle.com. Integrating OBIEE 11g into Weblogic’s SAML SSO | Andre Correa A-Team blogger Andre Correa illustrates a transient federation scenario. InfoQ: Cloud 2017: Cloud Architectures in 5 Years Andrew Phillips, Mark Holdsworth, Martijn Verburg, Patrick Debois, and Richard Davies review the evolution of cloud computing so far and look five years into the future. Thought for the Day "One cannot make an omelet without breaking eggs – but it is amazing how many eggs one can break without making a decent omelet." — Charles P. Issawi Source: softwarequotes.com

  Read the article

• Why am I getting a "network is unreachable" error on Ubuntu Server?

  - by jason328

  I'm a completely new to Ubuntu server and am having a hard time connecting the server to the internet. I first ran ping -n 8.8.8.8 connect:Network is unreachable Then I ran ifconfig Link encap:Local Loopback inet addr:127.0.0.1 Mask 255.0.0.0 inet6 addr: ::1/28Scope:host UP LOOPBACK RUNNING MTU:16436 RX packets:192 errors:0 dropped:0 overruns:0 frame:0 TX packets:192 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:15360 (15.2KB) TX bytes:15360 (15.3KB) Here is ouput for sudo lspci -n 00:00.0 0600: 8086:2580 (rev 04) 00:02.0 0300: 8086:2582 (rev 04) 00:1d.0 0c03: 8086:2658 (rev 03) 00:1d.1 0c03: 8086:2659 (rev 03) 00:1d.0 0c03: 8086:265a (rev 03) 00:1d.0 0c03: 8086:265b (rev 03) 00:1d.0 0c03: 8086:265c (rev 03) 00:1e.0 0604: 8086:244e (rev d3) 00:1e.0 0401: 8086:266e (rev 03) 00:1f.0 0601: 8086:2640 (rev 03) 00:1f.0 0101: 8086:2651 (rev 03) 00:1f.0 0c05: 8086:266a (rev 03) 00:0b.0 0200: 8086:1654 (rev 03) lshw-c network returns WARNING: you should run this program as super-user. *-network DISABLED description:Ethernet interface product: NetXtreme BCM5705_2 Gigabit Ethernet vender: Broadcom Corporation physical id:b bus info:pci@0000:0a:0b.0 logical name: eth0 capabilities: bus_master_cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion= 3.121 firmware=5705-v3.18 latency=32 mingnt=64 multicast=yes port=twister pair lsmod code returned this Module Size Used By e100 37213 0 dm_crypt 23125 1 ppdev 17113 0 psmouse 87603 0 snd_intel8x0 38570 0 snd_ac97_codec 134826 1 snd_intel8x0 ac97_bus 12730 1 snd_ac97_codec snd_pcm 97188 2 snd_intel8x0, snd_ac97_codec serio_raw 13211 0 snd_timer 29990 1 snd_pcm snd 78855 4 snd_intel8x0, snd_ac97_codec, snd_pcm,snd_timer soundcore 15091 1 snd snd_page_alloc 18529 2 snd_intel8x0, snd_pcm ext2 73795 1 parport_pc 32866 1 mac_hid 13253 0 lp 17799 0 parport 46562 3 ppdev, parport_pc,lp usbhid 47199 0 hid 99559 1 usbhid tg3 152032 0 i915 468651 1 floppy 70365 0 drm_kms_helper 46978 1 i915 drm 242038 2 i915,drm_kms_helper i2c_algo_bit 13423 1 i915 video 19596 1 i915 Again there is more but it's giving info on the driver itself. I know it works, I've used it. I assume then that my network got disabled when I installed Ubuntu Server. How do I enable it? I checked and the internet cable is connected to the D-link router. I have also used this same computer for internet access when I had Ubuntu Desktop installed so internet does work.

  Read the article

• No sound after clean install 11.10

  - by Jorge

  First of all, sorry to ask this, I'm sure that this was asked so many times before. Second, sorry for the English, it's not my native language. And Third, thank you in advance. So, I hope the follow info will help, here's a log. http://www.alsa-project.org/db/?f=07089caf530494bc4bc23e1d1cd56b3a5fae03c6 I already check 'System - Preferences - Sound'. Here's a screenshot http://i.imgur.com/Ghwnj.png > jorge@jorge-desktop:~$ sudo lshw -class multimedia > *-multimedia > description: Multimedia audio controller > product: VT8233/A/8235/8237 AC97 Audio Controller > vendor: VIA Technologies, Inc. > physical id: 11.5 > bus info: pci@0000:00:11.5 > version: 60 > width: 32 bits > clock: 33MHz > capabilities: pm cap_list > configuration: driver=VIA 82xx Audio latency=0 > resources: irq:22 ioport:e400(size=256) Tried with no results: > sudo apt-get remove --purge alsa-base > sudo apt-get remove --purge pulseaudio > sudo apt-get clean && sudo apt-get autoremove > sudo apt-get install alsa-base > sudo apt-get install pulseaudio > sudo apt-get install ubuntu-desktop Also > sudo gedit /etc/default/grub > > from: > > GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" > > to: > > GRUB_CMDLINE_LINUX_DEFAULT="quiet splash radeon.audio=1" > > sudo update-grub > > And Reboot... without any result. EDIT: I made sure that everything it's fine with aplay -l and lspci -v and lsmod; and checked alsamixer, it's not in mute. Well I'm running out of ideas. Thanks.

  Read the article

• How to debug lag using Bluetooth connected mouse and A2DP headset?

  - by gertvdijk

  I own a Logitech M555b mouse (since a week) for use with my HP Elitebook 8570w laptop running Kubuntu 12.04. Works fine right after connecting using the KDE Bluetooth control module. However, after some time (seemingly random), it starts to lag. Movements are being delayed for roughly 500ms for a short period of time. Usually it recovers after some time too, but it can take minutes. All actions are being delayed: movements, click, scrolls. Additionally, the movements can be choppy during these times. A workaround that always works for the same short period of time is to disconnect an re-connect the mouse. This can be done using the same KDE Bluetooth control module. What did I try already? Running this at boot time: echo on > `readlink -f /sys/class/bluetooth/hci0`/../../../power/level To disable any power saving features on the Bluetooth hci0 device. Check the mouse's batteries (it's just a week old, other new batteries: same result) Checking logs and kernel messages about Bluetooth-related entries: none aside the expected messages on connect time. I'm running kernel 3.5.0-13-generic as provided in the xorg-edgers PPA. Booting the regular 3.2 Precise kernel results in the same behaviour. Some other information that may help: It happens when no other Bluetooth connections are active on the machine. Similar symptoms also occur on my Bluetooth stereo (A2DP) headset, but then it's audio lagging and skipping. Swapping Bluetooth profiles as described here then helps. Conclusion: it's not the mouse that's faulty. The headset always worked fine using my now dead Thinkpad T61p with built-in Bluetooth. The bluetooth module in my laptop is connected via USB and shows up as Bus 002 Device 003: ID 0a5c:21e1 Broadcom Corp. I'm mobile and several people around me are using Bluetooth at work (A2DP mostly). It also occurs at home, where my neighbours are probably using Bluetooth as well. It could just be radio interference, but I think Bluetooth connections should just hop to another channel. And, moreover, it just works properly instantly when re-connecting. Therefore I think it's a software driver issue and I'd like to debug it. Is there any way to get more verbose logging on the Bluetooth(-hid) modules?

  Read the article

• Okular can't read pdf files

  - by hoang anh Nguyen

  I recently have installed Okular on my Ubuntu 14.04. The problem is when I open pdf files, okular gives me the error "Can not find a plugin which is able to handle the document being passed." When I ran Okular by Terminal, this is the message I get. okular(14100)/kdeui (KIconLoader): Error: standard icon theme "oxygen" not found! okular(14100)/kdeui (KIconLoader): Error: standard icon theme "oxygen" not found! okular(14100) KPixmapSequence::Private::loadSequence: Invalid pixmap specified. okular(14100) KPixmapSequence::Private::loadSequence: Invalid pixmap specified. okular(14100) KPixmapSequence::frameSize: No frame loaded okular(14100) KPixmapSequence::Private::loadSequence: Invalid pixmap specified. okular(14100) KPixmapSequence::frameSize: No frame loaded okular(14100) KPixmapSequence::Private::loadSequence: Invalid pixmap specified. okular(14100) KPixmapSequence::frameSize: No frame loaded okular(14100) KPixmapSequence::Private::loadSequence: Invalid pixmap specified. okular(14100) KPixmapSequence::frameSize: No frame loaded okular(14100) KPixmapSequence::Private::loadSequence: Invalid pixmap specified. okular(14100) KPixmapSequence::frameSize: No frame loaded okular(14100) KPixmapSequence::Private::loadSequence: Invalid pixmap specified. okular(14100) KPixmapSequence::frameSize: No frame loaded okular(14100): No ksycoca4 database available! okular(14100)/kdecore (trader) KServiceTypeTrader::defaultOffers: KServiceTypeTrader: serviceType "okular/Generator" not found okular(14100)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig: okular(14100)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig: okular(14100)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig: okular(14100)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig: okular(14100)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig: okular(14100): No ksycoca4 database available! okular(14100)/kdecore (trader) mimeTypeSycocaServiceOffers: KMimeTypeTrader: mimeType "application/pdf" not found okular(14100): No ksycoca4 database available! okular(14100)/kdecore (trader): KMimeTypeTrader: couldn't find service type "okular/Generator" Please ensure that the .desktop file for it is installed; then run kbuildsycoca4. okular(14100)/okular (app) Okular::Document::openDocument: No plugin for mimetype '"application/pdf"'. okular(14100): Couldn't start knotify from knotify4.desktop: "KLauncher could not be reached via D-Bus. Error when calling start_service_by_desktop_path: The name org.kde.klauncher was not provided by any .service files " okular(14100)/kdeui (KNotification) KNotification::slotReceivedIdError: Error while contacting notify daemon "The name org.kde.knotify was not provided by any .service files" X Error: BadWindow (invalid Window parameter) 3 Major opcode: 20 (X_GetProperty) Resource id: 0x2a0002e okular(14110) KPixmapSequence::Private::loadSequence: Invalid pixmap specified. okular(14110) KPixmapSequence::frameSize: No frame loaded okular(14110) KPixmapSequence::Private::loadSequence: Invalid pixmap specified. okular(14110) KPixmapSequence::frameSize: No frame loaded okular(14110) KPixmapSequence::Private::loadSequence: Invalid pixmap specified. okular(14110) KPixmapSequence::frameSize: No frame loaded X Error: BadWindow (invalid Window parameter) 3 Major opcode: 20 (X_GetProperty) Resource id: 0x2a0001d X Error: BadWindow (invalid Window parameter) 3 Major opcode: 20 (X_GetProperty) Resource id: 0x2a0001d I would be much appreciated for any suggestion to solve this problem. Thanks a lot :)

  Read the article

• Is Infiniband going to get squeezed by iWARP and external QPI?

  - by andy.grover

  The Inquirer certainly thinks so.However, I'm not so sure it makes sense to compare Infiniband to an as-yet-unannounced optical external QPI. QPI is currently a processor interconnect. CPUs, RAM, and devices connected by it are conceptually part of the same machine -- they run a single OS, for example. They are both "networks" or "fabrics" but they have very different design trade-offs.Another widely-used bus in the system is closer to Infiniband than QPI -- PCI Express. Isn't it more likely that PCIe could take on IB? There are companies already who have solutions that use external PCI Express for cluster interconnect, but these have not gained significant market share. Why would QPI, a technology whose sweet spot is even further from Infiniband's than PCIe, be able to challenge Infiniband? It's hard to speculate without much information, but right now it doesn't seem likely to me.The other prediction made in the article is that Intel's 10GbE iWARP card could squeeze IB on the low end, due to its greater compatibility and lower cost.It's definitely never a good idea to bet against Ethernet when it comes to mass-market, commodity networking. Ethernet will win. 10GbE will win. But, there are now two competing ways to implement the low-latency RDMA Verbs interface on top of Ethernet. iWARP is essentially RDMA over TCP/IP over Ethernet. The new alternative is IBoE (Infiniband over Ethernet, aka RoCEE, aka "Rocky"). This encapsulates the IB packet protocol directly in the Ethernet frame. It loses the layer 3 routability of iWARP, but better maintains software compatibility with existing apps that use IB, and is simpler to implement in both software and hardware. iWARP has a substantial head start, but I believe that IBoE silicon will eventually be cheaper, and more likely to be implemented in commodity Ethernet hardware.I think IBoE is going to take low-end market share from traditional IB, but I think this is a situation IB hardware vendors have no problem accepting. Commoditized IBoE NICs invite greater use of RDMA features, and when higher performance is needed, customers can upgrade to "real" IB, maintaining IB's justification for higher prices. (IB max interconnect speeds have historically been 2-4x higher than Ethernet, and I don't see that changing.)(ObDisclosure: My current employer now sells IB hardware. I previously also worked at Intel. My opinions are my own, duh.)

  Read the article

• links for 2011-02-21

  - by Bob Rhubart

  Calling all enterprise architects | Enterprise architecture - InfoWorld Nominations are now open for the 2011 InfoWorld Enterprise Architecture Award, honoring companies whose enterprise architecture initiatives made a difference (tags: ping.fm) Red Tape, Part II : OTN Garage "How do you back up all of that storage? Tape: really fast tape. And, lots of it. This creates a whole variety of very interesting challenges today, elevating the topic to – at the very least – glamorous, but I think it qualifies as being downright hot!" - Kemer Thomson (tags: oracle entarch datastorage) The Buttso Blathers: Using Secure Config Files with the WebLogic Maven Plugin "WebLogic Server has long had a mechanism to provide a more secure way of connecting to the Administration Server from client utilities such that the username and password do not need to be specified and therefore can’t be seen from the process list or command shell history." (tags: oracle weblogic) World-class EA | Open Group Blog "World-class Enterprise Architecture is all about creating definitive collateral that defines how the architecture delivers value for societal value." - Mick Adams (tags: enterprisearchitecture entarch opengroup) Enterprise Process Maps: A Process Picture worth a Million Words (Telecommunications Architecture Corner) "Every BPM project (holistic BPM kick-off, enterprise system implementation, Service-oriented Architecture, business process transformation, corporate performance management, etc.) should be begin with a clear understanding of the business environment..." - Raul Goycoolea (tags: oracle otn telecommunications businessprocess entarch bpm) Andrejus Baranovskis's Blog: WebCenter PS3 Customization Manager- Long Awaited Feature for MDS Oracle ACE Director Andrejus Baranovski shares "really great news for those of you who are working on MDS personalization and customization support in Oracle Fusion Middleware applications." (tags: oracle otn oracleace webcenter enterprise2.0) Oracle WebCenter: Common User Experience Architecture (Oracle Enterprise 2.0 Blog) Kellsey Ruppel describes "how the new release of Oracle WebCenter delivers a Common User Experience Architecture." (tags: oracle otn webcenter enterprise2.0) Java / Oracle SOA blog: Do your SOA deployments & configuration with AIA Oracle ACE Edwin Biemond illustrates the use of the SOA Suite / FMW deployment framework, "one of the Application Integration Architecture (AIA) hidden gems." (tags: oracle oracleace soa otn fusionmiddleware) Enterprise Software Development with Java: Clustering Stateful Session Beans with GlassFish 3.1 Oracle ACE Director Markus Eisele describes what he did "to get a Stateful Session Bean failover scenario working with two instances on one node." (tags: oracle otn oracleace glassfish) Enhanced REST Support in Oracle Service Bus 11gR1 (SOA Thinker) Jeff Davies illustrates how to re-implement the REST-ful Products services using query strings for passing parameter information. (tags: oracle otn soa REST)

  Read the article

< Previous Page | 46 47 48 49 50 51 52 53 54 55 56 57  | Next Page >