Search Results

Search found 1352 results on 55 pages for 'contract labor'.

Page 50/55 | < Previous Page | 46 47 48 49 50 51 52 53 54 55  | Next Page >

• Choosing a distributed shared memory solution

  - by mindas

  I have a task to build a prototype for a massively scalable distributed shared memory (DSM) app. The prototype would only serve as a proof-of-concept, but I want to spend my time most effectively by picking the components which would be used in the real solution later on. The aim of this solution is to take data input from an external source, churn it and make the result available for a number of frontends. Those "frontends" would just take the data from the cache and serve it without extra processing. The amount of frontend hits on this data can literally be millions per second. The data itself is very volatile; it can (and does) change quite rapidly. However the frontends should see "old" data until the newest has been processed and cached. The processing and writing is done by a single (redundant) node while other nodes only read the data. In other words: no read-through behaviour. I was looking into solutions like memcached however this particular one doesn't fulfil all our requirements which are listed below: The solution must at least have Java client API which is reasonably well maintained as the rest of app is written in Java and we are seasoned Java developers; The solution must be totally elastic: it should be possible to add new nodes without restarting other nodes in the cluster; The solution must be able to handle failover. Yes, I realize this means some overhead, but the overall served data size isn't big (1G max) so this shouldn't be a problem. By "failover" I mean seamless execution without hardcoding/changing server IP address(es) like in memcached clients when a node goes down; Ideally it should be possible to specify the degree of data overlapping (e.g. how many copies of the same data should be stored in the DSM cluster); There is no need to permanently store all the data but there might be a need of post-processing of some of the data (e.g. serialization to the DB). Price. Obviously we prefer free/open source but we're happy to pay a reasonable amount if a solution is worth it. In any way, paid 24hr/day support contract is a must. The whole thing has to be hosted in our data centers so SaaS offerings like Amazon SimpleDB are out of scope. We would only consider this if no other options would be available. Ideally the solution would be strictly consistent (as in CAP); however, eventual consistence can be considered as an option. Thanks in advance for any ideas.

  Read the article

• Stuck on an ASP.NET/WCF WSDL Parsing Error

  - by Vaccano

  I have a WCF Web Service that my ASP.NET app uses. It has been working fine for quite some time. I just added in a Dev Express Grid (and the Dev Express DLLs) and a new page that uses them and now I am getting parsing errors on the WSDL. But the weird part is that it works fine on my machine but fails on the web server machine. (Both are connecting to the same web services WSDL.) Here is the error message I am getting: Server Error in '/MyWebAppWebDev' Application. -------------------------------------------------------------------------------- Parser Error Description: An error occurred during the parsing of a resource required to service this request. Please review the following specific parse error details and modify your source file appropriately. Parser Error Message: Reference.svcmap: Failed to generate code for the service reference 'MyWebAppService'. Cannot import wsdl:portType Detail: An exception was thrown while running a WSDL import extension: System.ServiceModel.Description.DataContractSerializerMessageContractImporter Error: Referenced type 'WebClientApp.MyWebAppService.ReferenceUpdatesDataContract, WebClientApp, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null' with data contract name 'ReferenceUpdatesDataContract' in namespace 'http://schemas.datacontract.org/2004/07/MyWebAppServiceLibrary.DataContracts' cannot be used since it does not match imported DataContract. Need to exclude this type from referenced types. XPath to Error Source: //wsdl:definitions[@targetNamespace='http://tempuri.org/']/wsdl:portType[@name='IMyWebAppReferenceDataServiceLib'] Cannot import wsdl:binding Detail: There was an error importing a wsdl:portType that the wsdl:binding is dependent on. XPath to wsdl:portType: //wsdl:definitions[@targetNamespace='http://tempuri.org/']/wsdl:portType[@name='IMyWebAppReferenceDataServiceLib'] XPath to Error Source: //wsdl:definitions[@targetNamespace='http://tempuri.org/']/wsdl:binding[@name='MyWebAppServicesDefaultEndpoint'] Cannot import wsdl:port Detail: There was an error importing a wsdl:binding that the wsdl:port is dependent on. XPath to wsdl:binding: //wsdl:definitions[@targetNamespace='http://tempuri.org/']/wsdl:binding[@name='MyWebAppServicesDefaultEndpoint'] XPath to Error Source: //wsdl:definitions[@targetNamespace='http://tempuri.org/']/wsdl:service[@name='MyWebAppReferenceDataServiceLib']/wsdl:port[@name='MyWebAppServicesDefaultEndpoint'] Source Error: [No relevant source lines] Source File: /MyWebAppWebDev/App_WebReferences/MyWebAppService/ Line: 1 I am completely stumped on this. I have checked my web.config endpoint address and it is spot on (and notably is not in the error message above). Any ideas would be welcomed. Things I have tried: Giving permissions to C:\Windows\temp to my Website user name Giving permissions to C:\Windows\temp to my App pool user name Checking to see that none of my data contracts are generic and have IsReference=true in them.

  Read the article

• Streaming binary data to WCF rest service gives Bad Request (400) when content length is greater than 64k

  - by Mikey Cee

  I have a WCF service that takes a stream: [ServiceContract] public class UploadService : BaseService { [OperationContract] [WebInvoke(BodyStyle=WebMessageBodyStyle.Bare, Method=WebRequestMethods.Http.Post)] public void Upload(Stream data) { // etc. } } This method is to allow my Silverlight application to upload large binary files, the easiest way being to craft the HTTP request by hand from the client. Here is the code in the Silverlight client that does this: const int contentLength = 64 * 1024; // 64 Kb var request = (HttpWebRequest)WebRequest.Create("http://localhost:8732/UploadService/"); request.AllowWriteStreamBuffering = false; request.Method = WebRequestMethods.Http.Post; request.ContentType = "application/octet-stream"; request.ContentLength = contentLength; using (var outputStream = request.GetRequestStream()) { outputStream.Write(new byte[contentLength], 0, contentLength); outputStream.Flush(); using (var response = request.GetResponse()); } Now, in the case above, where I am streaming 64 kB of data (or less), this works OK and if I set a breakpoint in my WCF method, and I can examine the stream and see 64 kB worth of zeros - yay! The problem arises if I send anything more than 64 kB of data, for instance by changing the first line of my client code to the following: const int contentLength = 64 * 1024 + 1; // 64 kB + 1 B This now throws an exception when I call request.GetResponse(): The remote server returned an error: (400) Bad Request. In my WCF configuration I have set maxReceivedMessageSize, maxBufferSize and maxBufferPoolSize to 2147483647, but to no avail. Here are the relevant sections from my service's app.config: <service name="UploadService"> <endpoint address="" binding="webHttpBinding" bindingName="StreamedRequestWebBinding" contract="UploadService" behaviorConfiguration="webBehavior"> <identity> <dns value="localhost" /> </identity> </endpoint> <host> <baseAddresses> <add baseAddress="http://localhost:8732/UploadService/" /> </baseAddresses> </host> </service> <bindings> <webHttpBinding> <binding name="StreamedRequestWebBinding" bypassProxyOnLocal="true" useDefaultWebProxy="false" hostNameComparisonMode="WeakWildcard" sendTimeout="00:05:00" openTimeout="00:05:00" receiveTimeout="00:05:00" maxReceivedMessageSize="2147483647" maxBufferSize="2147483647" maxBufferPoolSize="2147483647" transferMode="StreamedRequest"> <readerQuotas maxArrayLength="2147483647" maxStringContentLength="2147483647" /> </binding> </webHttpBinding> </bindings> <behaviors> <endpointBehaviors> <behavior name="webBehavior"> <webHttp /> </behavior> <endpointBehaviors> </behaviors> How do I make my service accept more than 64 kB of streamed post data?

  Read the article

• The remote server returned an error: (400) Bad Request

  - by pravakar

  Hi, I am getting the following errors: "The remote server returned an error: (400) Bad Request" "Requested time out" sometimes when connecting to a host using a web service. If the XML returned is 5 kb then it is working fine, but if the size is 450kb or above it is displaying the error. Below is my code as well as the config file that resides at the client system. We don't have access to the settings of the server. Protected Sub Button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Dim fileName As String = Server.MapPath("capitaljobs2.xml") Dim client = New CapitalJobsService.DataServiceClient("WSHttpBinding_IDataService", "http://xyz/webservice.svc") Dim userAccount = New UserAccount() 'replace here Dim jobAdList = client.GetProviderJobs(userAccount) '## Needed only to create XML files - do not ucomment - will overwrite files 'if (jobAdList != null) ' SerialiseJobAds(fileName, jobAdList); '## Read new ads from Xml file Dim capitalJobsList = DeserialiseJobdAds(fileName) UpdateProviderJobsFromXml(client, userAccount, capitalJobsList) client.Close() End Sub Private Shared Function DeserialiseJobdAds(ByVal fileName As String) As CapitalJobsService.CapitalJobsList Dim capitalJobsList As CapitalJobsService.CapitalJobsList ' Deserialize the data and read it from the instance If File.Exists(fileName) Then Dim fs = New FileStream(fileName, FileMode.Open) Dim reader = XmlDictionaryReader.CreateTextReader(fs, New XmlDictionaryReaderQuotas()) Dim ser2 = New DataContractSerializer(GetType(CapitalJobsList)) capitalJobsList = DirectCast(ser2.ReadObject(reader, True), CapitalJobsList) reader.Close() fs.Close() Return capitalJobsList End If Return Nothing End Function And the config file <system.web> <httpRuntime maxRequestLength="524288" /> </system.web> <system.serviceModel> <bindings> <wsHttpBinding> <binding name="WSHttpBinding_IDataService" closeTimeout="00:10:00" openTimeout="00:10:00" receiveTimeout="00:10:00" sendTimeout="00:10:00" bypassProxyOnLocal="false" transactionFlow="false" hostNameComparisonMode="StrongWildcard" maxBufferPoolSize="2147483647" maxReceivedMessageSize="2147483647" messageEncoding="Text" textEncoding="utf-8" useDefaultWebProxy="true" allowCookies="false"> <readerQuotas maxDepth="2000000" maxStringContentLength="2000000" maxArrayLength="2000000" maxBytesPerRead="2000000" maxNameTableCharCount="2000000" /> <reliableSession ordered="true" inactivityTimeout="00:10:00" enabled="false" /> <security mode="None"> <transport clientCredentialType="Windows" proxyCredentialType="None" realm=""/> <message clientCredentialType="Windows" negotiateServiceCredential="true" establishSecurityContext="true"/> </security> </binding> </wsHttpBinding> </bindings> <client> <endpoint address="http://xyz/DataService.svc" binding="wsHttpBinding" bindingConfiguration="WSHttpBinding_IDataService" contract="CapitalJobsService.IDataService" name="WSHttpBinding_IDataService"> <identity> <dns value="localhost"/> </identity> </endpoint> </client> </system.serviceModel> I am using "Fiddler" to track the activities it is reading and terminating file like * FIDDLER: RawDisplay truncated at 16384 characters. Right-click to disable truncation. * But in config the number 16348 is not mentioned anywhere. Can you figure out if the error is on client or server side? The settings above are on the client side. Thanks in advance.

  Read the article

• Keeping track of business rules within IT department?

  - by evaldas-alexander

  I am looking for the best way to keep track of the business rules for both developers and everybody else (support staff / management) in a startup enviroment. The challenge is that our business model requires quite a lot of different business rules, which are created pretty much on the fly and evolving organically after that. After running this project for 3+ years, we have so many of such rules that often the only way to be sure about what the application is supposed to do in a certain situation is to go find the module responsible for that process and analyze its code and comments. That is all fine as long as you have one single developer who created the entire application from the scratch, but every new developer needs to go over pretty much entire codebase in order to understand how the application works. Even bigger problem is that non technical employees don't even have that option and therefore are forced to ask me pretty much every day how some certain case would be handled by the application. Quick example - we only start charging for our customer campaigns once they have been active for at least 72 hours, but at the same time we stop creating invoices for campaigns that belong to insolvent accounts and close such accounts within a month of the first failed charge. That does not apply to accounts that are set to "non-chargeable" which most commonly belongs to us since we are using the service ourselves. The invoices are created on the 1st of each month and include charges from the previous month + any current balance that the account might have. However, some customers are charged only 4 days after their invoice has been generated due to issues with their billing department. In addition to that, invoices are also created when customer deactivates his campaign, but that can only be done once the campaign is not longer under mandatory 6 month contract, unless account manager approves early deactivation. I know, that's quite a lot of rules that need to be taken into account when answering a question "when do we bill our customers", but actually I could still append an asterisk at the end of each sentence in order to disclose some rare exceptions. Of course, it would be easiest just to keep the business rules to the minimum, but we need to adapt to changing marketplace - i.e. less than a year ago we had no contracts whatsoever. One idea that I had so far was a simplistic wiki with categories corresponding to areas such as "Account activation", "Invoicing", "Collection procedures" and so on. Another idea would be to have giant interactive flowchart showing the entire customer "life cycle" from prospecting to account deactivation. What are your experiences / suggestions?

  Read the article

• How does this Singleton-like web class persists session data, even though session is not updated in

  - by Micah Burnett

  Ok, I've got this singleton-like web class which uses session to maintain state. I initially thought I was going to have to manipulate the session variables on each "set" so that the new values were updated in the session. However I tried using it as-is, and somehow, it remembers state. For example, if run this code on one page: UserContext.Current.User.FirstName = "Micah"; And run this code in a different browser tab, FirstName is displayed correctly: Response.Write(UserContext.Current.User.FirstName); Can someone tell me (prove) how this data is getting persisted in the session? Here is the class: using System; using System.Collections.Generic; using System.Linq; using System.Web; public class UserContext { private UserContext() { } public static UserContext Current { get { if (System.Web.HttpContext.Current.Session["UserContext"] == null) { UserContext uc = new UserContext(); uc.User = new User(); System.Web.HttpContext.Current.Session["UserContext"] = uc; } return (UserContext)System.Web.HttpContext.Current.Session["UserContext"]; } } private string HospitalField; public string Hospital { get { return HospitalField; } set { HospitalField = value; ContractField = null; ModelType = null; } } private string ContractField; public string Contract { get { return ContractField; } set { ContractField = value; ModelType = string.Empty; } } private string ModelTypeField; public string ModelType { get { return ModelTypeField; } set { ModelTypeField = value; } } private User UserField; public User User { get { return UserField; } set { UserField = value; } } public void DoSomething() { } } public class User { public int UserId { get; set; } public string FirstName { get; set; } } I added this to a watch, and can see that the session variable is definitely being set somewhere: (UserContext)System.Web.HttpContext.Current.Session["UserContext"]; As soon as a setter is called the Session var is immediately updated: set { HospitalField = value; //<--- here ContractField = null; ModelType = null; }

  Read the article

• Getting jQuery slideshow animation to stop on click

  - by hollyb

  I have a slide show built with jQuery that pauses on hover. It has a group of thumbnails sitting on top of the image that advances the image when clicked, otherwise the slideshow just auto-rotates through all the images. There is also a +/- to expand and contract a caption related to each image. I want to have the slideshow's automatic advancing to stop if one of the thumbnails is clicked, or the +/-. Basically, just stop whenever a user clicks anywhere within the gallery (div class=".homeImg"). I'm having a major brain fart in getting this working properly and could use some advice. Here's the jQuery: $(document).ready(function() { $(".main_image .desc").show(); //Show image info $(".main_image .block").animate({ opacity: 0.85 }, 1 ); //Set Opacity //Click and Hover events for thumbnail list $(".image_thumb ul li:first").addClass('active'); // * Adds a class 'last' to the last li to let the rotator know when to return to the first $(".image_thumb ul li:last").addClass('last'); $(".image_thumb ul li").click(function(){ //Set Variables var imgAlt = $(this).find('img').attr("alt"); //Get Alt Tag of Image var imgTitle = $(this).find('a').attr("href"); //Get Main Image URL var imgDesc = $(this).find('.block').html(); //Get HTML of block var imgDescHeight = $(".main_image").find('.block').height(); //Calculate height of block if ($(this).is(".active")) { //If it's already active, then… return false; // Don't click through } else { //Animate $(".main_image img").animate({ opacity: 0}, 800 ); $(".main_image .block").animate({ opacity: 0, marginBottom: -imgDescHeight }, 800, function() { $(".main_image .block").html(imgDesc).animate({ opacity: 0.85, marginBottom: "0" }, 250 ); $(".main_image img").attr({ src: imgTitle , alt: imgAlt}).animate({ opacity: 1}, 250 ); }); } $(".image_thumb ul li").removeClass('active'); //Remove class of 'active' on all lists $(this).addClass('active'); //add class of 'active' on this list only return false; }) .hover(function(){ $(this).addClass('hover'); }, function() { $(this).removeClass('hover'); }); //Toggle teaser $("a.collapse").click(function(){ $(".main_image .block").slideToggle(); $("a.collapse").toggleClass("show"); return false; // added to remove # browser jump }); // If we are hovering over the image area, pause the clickNext function pauseClickNext = false; $(".homeImg").hover( function () { pauseClickNext = true; }, function () { pauseClickNext = false; } ); // Define function to click the next li var clickNext = function(){ if(!pauseClickNext) { /// find the next li after .active var $next_li = $("li.active").next("li"); if($("li.active").hasClass("last") ){ $(".image_thumb ul li:first").trigger("click"); } else { $next_li.trigger("click"); } } }; // Time between image transition setInterval(clickNext, 6000); });

  Read the article

• Hide a base class method from derived class, but still visible outside of assembly

  - by clintp

  This is a question about tidyness. The project is already working, I'm satisfied with the design but I have a couple of loose ends that I'd like to tie up. My project has a plugin architecture. The main body of the program dispatches work to the plugins that each reside in their own AppDomain. The plugins are described with an interface, which is used by the main program (to get the signature for invoking DispatchTaskToPlugin) and by the plugins themselves as an API contract: namespace AppServer.Plugin.Common { public interface IAppServerPlugin { void Register(); void DispatchTaskToPlugin(Task t); // Other methods omitted } } In the main body of the program Register() is called so that the plugin can register its callback methods with the base class, and then later DispatchTaskToPlugin() is called to get the plugin running. The plugins themselves are in two parts. There's a base class that implements the framework for the plugin (setup, housekeeping, teardown, etc..). This is where DispatchTaskToPlugin is actually defined: namespace AppServer.Plugin { abstract public class BasePlugin : MarshalByRefObject, AppServer.Plugin.Common.IAppServerPlugin { public void DispatchTaskToPlugin(Task t) { // ... // Eventual call to actual plugin code // } // Other methods omitted } } The actual plugins themselves only need to implement a Register() method (to give the base class the delegates to call eventually) and then their business logic. namespace AppServer.Plugin { public class Plugin : BasePlugin { override public void Register() { // Calls a method in the base class to register itself. } // Various callback methods, business logic, etc... } } Now in the base class (BasePlugin) I've implemented all kinds of convenience methods, collected data, etc.. for the plugins to use. Everything's kosher except for that lingering method DispatchTaskToPlugin(). It's not supposed to be callable from the Plugin class implementations -- they have no use for it. It's only needed by the dispatcher in the main body of the program. How can I prevent the derived classes (Plugin) from seeing the method in the base class (BasePlugin/DispatchTaskToPlugin) but still have it visible from outside of the assembly? I can split hairs and have DispatchTaskToPlugin() throw an exception if it's called from the derived classes, but that's closing the barn door a little late. I'd like to keep it out of Intellisense or possibly have the compiler take care of this for me. Suggestions?

  Read the article

• How to manage multiple versions of the same record

  - by Darvis Lombardo

  I am doing short-term contract work for a company that is trying to implement a check-in/check-out type of workflow for their database records. Here's how it should work... 1) A user creates a new entity within the application. There are about 20 related tables that will be populated in addition to the main entity table. 2) Once the entity is created the user will mark it as the master. 3) Another user can make changes to the master only by "checking out" the entity. Multiple users can checkout the entity at the same time. 4) Once the user has made all the necessary changes to the entity, they put it in a "needs approval" status. 5) After an authorized user reviews the entity, they can promote it to master which will put the original record in a tombstoned status. The way they are currently accomplishing the "check out" is by duplicating the entity records in all the tables. The primary keys include EntityID + EntityDate, so they duplicate the entity records in all related tables with the same EntityID and an updated EntityDate and give it a status of "checked out". When the record is put into the next state (needs approval), the duplication occurs again. Eventually it will be promoted to master at which time the final record is marked as master and the original master is marked as dead. This design seems hideous to me, but I understand why they've done it. When someone looks up an entity from within the application, they need to see all current versions of that entity. This was a very straightforward way for making that happen. But the fact that they are representing the same entity multiple times within the same table(s) doesn't sit well with me, nor does the fact that they are duplicating EVERY piece of data rather than only storing deltas. I would be interested in hearing your reaction to the design, whether positive or negative. I would also be grateful for any resoures you can point me to that might be useful for seeing how someone else has implemented such a mechanism. Thanks! Darvis

  Read the article

• Silverlight MVVM MEF ViewInjection

  - by silverfighter

  Hi all, since my title is buzzword compliant I hope I will get lots of answers to my question or any pointers to the right direction. OK what I usually do is have a ViewModel which contains a list of ViewModels itself. public class MasterViewModel { public ObservableCollection<DetailViewModel> DetailViewModels { get; set; } public DetailViewModel Detail { get; set; } } <ItemsControl ItemsSource="{Binding DetailViewModels}"> <ItemsControl> <ItemsPanelTemplate> <StackPanel /> </ItemsPanelTemplate> </ItemsControl> <ItemsControl.ItemTemplate> <DataTemplate> <views:DetailsView /> </DataTemplate> </ItemsControl.ItemTemplate> </ItemsControl> With this in mind I will now come to my questions. I read a lot of good things about MEF and also saw the dashboard sample of Glenn Block but this was not helping me enough. What I want to do is sidbar (like the windows sidebar). Sidebar = StackPanel ListItems = Gadget ButI want it MVVM style OK I have something like a contract IGadget I implemented an custom Export. [ExportGadget(GadgetType = GadgetTypes.News)] I have my NewsGadgetView.xaml (which implements IGadget) and imports the NewsGadgetViewModel and also makes itself available as ExportGadget. so far so good. With this I can create a set of gadgets. Then I have my SidbarView.xaml which imports a sidebarViewModel. and now I get lost... I thought of something like a GadgetFactory which uses PartCreator to create my Gadgets. but this would sit in my SidebarView.xaml But I want to have control over my Gadgets to add and remove them from my sidebar. So I thought about something like an ObserveableCollection... Which I bind to The GadgetHost is basicaly Grid which will dynamicaly load the Gadget.... So how would I create my sidebar containing different gadgets without knowing which Gadgets are available and have a ViewModel for the sidebar as well as for each gadget?... Thanks for any help....

  Read the article

• jQuery toggling divs, expand collapse all and keep first item selected when page loads

  - by hollyb

  Hi, I have a question about some functionality I'm trying to add to my jQuery to enable a button or text to expand/contract all the divs on click... and I'd like to figure out how to keep the first div open when the page loads. Here is the jQuery: (document).ready(function(){ //Hides containers on load $(".toggle_container").hide(); //Switch "Open" and "Close" state on click $("h2.trigger").toggle(function(){ $(this).addClass("active"); }, function () { $(this).removeClass("active"); }); //Slide up and down on click $("h2.trigger").click(function(){ $(this).next(".toggle_container").slideToggle("slow"); }); }); And the css: // uses a background image with an on (+) and off (-) state stacked on top of each other h2.trigger { background: url(buttonBG.gif) no-repeat;height: 46px;line-height: 46px;width: 300px;font-size: 2em;font-weight: normal;} h2.trigger a {color: #fff;text-decoration: none; display: block;} h2.active {background-position: left bottom;} .toggle_container { overflow: hidden; } .toggle_container .block {padding: 20px;} And the html <h2 class="trigger"><a href="#">Heading</a></h2> <div class="toggle_container"> <div class="block">Stuff goes here</div> </div> <h2 class="trigger"><a href="#">Heading 2</a></h2> <div class="toggle_container"> <div class="block">Stuff goes here</div> </div> So it works great and looks great. However, when I try to get it to keep the first instance open, the background image that should adjust show the (-) state doesn't change. The code I used to this was: $(".toggle_container:first").show(); So, my question is, does anyone know of an easier way to show the first instance of this as open without having to created specials rules/class for the first item? Also, any ideas about how to make an open all/close all link? Thanks!

  Read the article

• WebServices does not interact with App

  - by daemonfire300

  I got a Silverlight App with-in a Web Project Web Silverlight The web contains a service: [WebService(Namespace = "svChat")] [WebServiceBinding(ConformsTo = WsiProfiles.BasicProfile1_1)] // To allow this Web Service to be called from script, using ASP.NET AJAX, uncomment the following line. //[System.Web.Script.Services.ScriptService] public class GetIPService : System.Web.Services.WebService { public GetIPService () { //Uncomment the following line if using designed components //InitializeComponent(); } [WebMethod] public string GetIp() { return HttpContext.Current.Request.ServerVariables["HTTP_X_FORWARDED_FOR"]; } } And I got a class in my Silverlight App using the Service: public class Client { private string ip; private string created; #region Properties public string Ip { get { return ip; } set { ip = value; } } public string Created { get { return created; } set { created = value; } } #endregion public Client() { } public void SetIp() { ServiceReference1.GetIPServiceSoapClient scIpClient = new svChat.ServiceReference1.GetIPServiceSoapClient(); scIpClient.GetIpCompleted += new EventHandler<svChat.ServiceReference1.GetIpCompletedEventArgs>(IpService_Completed); scIpClient.GetIpAsync(); } private void IpService_Completed(object sender, ServiceReference1.GetIpCompletedEventArgs e) { this.ip = e.Result; } } After Client is created, SetIp() is called, and Client.Ip is added to a text box. Nothing happens. Ip = null. Service itselfs works, tested it. Getting Ip by the above code works. Gettings Ip via service through Silverlight App does not work. <configuration> <system.serviceModel> <bindings> <basicHttpBinding> <binding name="GetIPServiceSoap" maxBufferSize="2147483647" maxReceivedMessageSize="2147483647"> <security mode="None" /> </binding> </basicHttpBinding> </bindings> <client> <endpoint address="http://localhost:2090/svChat.Web/GetIPService.asmx" binding="basicHttpBinding" bindingConfiguration="GetIPServiceSoap" contract="ServiceReference1.GetIPServiceSoap" name="GetIPServiceSoap" /> </client> </system.serviceModel> </configuration> Any ideas? regards,

  Read the article

• mootools fx working except in ie9

  - by Craig

  This is my first attempt with Mootools, so I welcome a critique of the code. I have a dynamic list of images that expand on the 'click" event and contract on the 'mouseout' event. The code works fine in all browsers (FF, Safari, Chrome, even the smartphones) but not in IE9 (JS is enabled) Anyone with similar problem or solution? I plan to use a lightbox effect, downloading a larger & clearer image to the center of the page, instead of just resizing a small image. However, I am hesitant to attempt this, if there is problems with IE9. I have coded three image sizes with the upload commit, so the larger image is available for the lightbox, but, I don't see anything in mootools for a lightbox, or am I missing it? $i = 0; while($i < count($validate)) { <div class="validate"> <div class="validate_image_<?php echo $validate[$i]['validate_type']; ?>"> <div class="validate_image" id="validate_image_wrapper_<?php echo $i; ?>"> <?php if ($validate[$i]['validate_image_filename'] != '') { if (file_exists(UPLOAD_DIR . 'validate_image/' . str_replace('.', '_medium.', $validate[$i]['validate_image_filename']))) { echo '<img src="' . UPLOAD_URL . 'validate_image/' . str_replace('.', '_medium.', $validate[$i]['validate_image_filename']) . '" alt="Listing Image" />'; } else { echo '<img src="' . UPLOAD_URL . 'validate_image/' . str_replace('.', '_large.', $validate[$i]['validate_image_filename']) . '" alt="Listing image" />'; } } else { ?> <img src="/images/no_image_posted_validate.png" alt="no image posted" /> <?php } ?> </div> ... remainder of HTML display code function setupEnlargeImage() { window.myFx = new Fx({ duration: 200, transition: Fx.Transitions.Sine.easeOut }); $$('.validate_image').addEvent('click', function() { window.selectedImage = this.id; myFx.start(1,2.0); }); $$('.validate_image').addEvent('mouseout', function() { window.selectedImage = this.id; myFx.start(1.0,1); }); myFx.set = function(value) { var style = "scale(" + (value) + ")"; $(window.selectedImage).setStyles({ "-webkit-transform": style, "-moz-transform": style, "-o-transform": style, "-ms-transform": style, transform: style }); } }

  Read the article

• What classes should I map against with NHibernate?

  - by apollodude217

  Currently, we use NHibernate to map business objects to database tables. Said business objects enforce business rules: The set accessors will throw an exception on the spot if the contract for that property is violated. Also, the properties enforce relationships with other objects (sometimes bidirectional!). Well, whenever NHibernate loads an object from the database (e.g. when ISession.Get(id) is called), the set accessors of the mapped properties are used to put the data into the object. What's good is that the middle tier of the application enforces business logic. What's bad is that the database does not. Sometimes crap finds its way into the database. If crap is loaded into the application, it bails (throws an exception). Sometimes it clearly should bail because it cannot do anything, but what if it can continue working? E.g., an admin tool that gathers real-time reports runs a high risk of failing unnecessarily instead of allowing an admin to even fix a (potential) problem. I don't have an example on me right now, but in some instances, letting NHibernate use the "front door" properties that also enforce relationships (especially bidi) leads to bugs. What are the best solutions? Currently, I will, on a per-property basis, create a "back door" just for NHibernate: public virtual int Blah {get {return _Blah;} set {/*enforces BR's*/}} protected virtual int _Blah {get {return blah;} set {blah = value;}} private int blah; I showed the above in C# 2 (no default properties) to demonstrate how this gets us basically 3 layers of, or views, to blah!!! While this certainly works, it does not seem ideal as it requires the BL to provide one (public) interface for the app-at-large, and another (protected) interface for the data access layer. There is an additional problem: To my knowledge, NHibernate does not give you a way to distinguish between the name of the property in the BL and the name of the property in the entity model (i.e. the name you use when you query, e.g. via HQL--whenever you give NHibernate the name (string) of a property). This becomes a problem when, at first, the BR's for some property Blah are no problem, so you refer to it in your O/R mapping... but then later, you have to add some BR's that do become a problem, so then you have to change your O/R mapping to use a new _Blah property, which breaks all existing queries using "Blah" (common problem with programming against strings). Has anyone solved these problems?!

  Read the article

• SOAP WCF Webservice behaves differently when called locally or remotely

  - by Idriss

  I have a WCF SOAP 1.1 Webservice with the configuration specified below. A concurrent call to any method of this endpoint hangs until the other returns when called remotely (from another computer on the network). I cannot replicate this when these methods are called locally (with a client located on the same machine). I tried to increase the maxConcurrentCalls with no luck ... the service behavior seems to be different according to the client local/remote location. Any guess? Thanks, <?xml version="1.0" encoding="utf-8"?> <configuration> <system.serviceModel> <services> <service behaviorConfiguration="MyCustomBehavior" name="CONTOSO.CONTOSOServerApi.IContosoServiceApiImplV1"> <endpoint address="" binding="customBinding" bindingConfiguration="WebBinding" bindingNamespace="http://contoso.com" contract="CONTOSO.CONTOSOServerApiInterfaceV1.IContosoServiceApiV1" /> </service> </services> <behaviors> <serviceBehaviors> <behavior name="MyCustomBehavior"> <serviceMetadata httpGetEnabled="true" httpGetUrl="http://localhost:8080/MyEndPointV1" /> <serviceDebug httpHelpPageEnabled="false" includeExceptionDetailInFaults="true" /> <serviceThrottling maxConcurrentSessions="10000" maxConcurrentCalls="1000"/> <dataContractSerializer maxItemsInObjectGraph="2147483647" /> </behavior> </serviceBehaviors> </behaviors> <bindings> <customBinding> <binding name="WebBinding"> <textMessageEncoding messageVersion="Soap11" maxReadPoolSize="2147483647" maxWritePoolSize="2147483647"> <readerQuotas maxDepth="2147483647" maxStringContentLength="2147483647" maxArrayLength="2147483647" maxBytesPerRead="2147483647" maxNameTableCharCount="2147483647" /> </textMessageEncoding> <httpsTransport /> </binding> </customBinding> </bindings> </system.serviceModel> </configuration>

  Read the article

• Asp.net web service: Problems accessing without www

  - by MysterM

  I have a Asp.net web service running on www.domain.com/Service.svc that I connect to using jQuery from my asp.net website. Everything works perfect if the user access my website with www.domain.com. But if the user uses only domain.com I get error: There was no channel actively listening at 'http://domain.com/Service.svc/get?date=2010-10-09'. This is often caused by an incorrect address URI. Ensure that the address to which the message is sent matches an address on which a service is listening. In my web.config I use the serviceHostingEnvironment tag to get the service running on my webhost (it doesn't work otherwise). Maybe this is what causes the error? Here is my system.serviceModel in web.config (I had some problems setting up the web service so that's why my web.config might be a bit messy: <system.serviceModel> <behaviors> <endpointBehaviors> <behavior name="ServiceAspNetAjaxBehavior"> <enableWebScript /> </behavior> </endpointBehaviors> <serviceBehaviors> <behavior name="ServiceBehavior"> <serviceDebug includeExceptionDetailInFaults="true" /> </behavior> </serviceBehaviors> </behaviors> <serviceHostingEnvironment aspNetCompatibilityEnabled="true"> <baseAddressPrefixFilters> <add prefix="http://www.domain.com"/> </baseAddressPrefixFilters> </serviceHostingEnvironment> <services> <service behaviorConfiguration="ServiceBehavior" name="Service"> <endpoint address="" behaviorConfiguration="ServiceAspNetAjaxBehavior" binding="webHttpBinding" bindingConfiguration="ServiceBinding" contract="Service" /> </service> </services> <bindings> <webHttpBinding> <binding name="ServiceBinding" maxBufferPoolSize="1000000" maxReceivedMessageSize="1000000"> <readerQuotas maxDepth="1000000" maxStringContentLength="1000000" maxArrayLength="1000000" maxBytesPerRead="1000000" maxNameTableCharCount="1000000" /> </binding> </webHttpBinding> </bindings> </system.serviceModel> How can I make it possible for my users to access my webservice also when using only domain.com?

  Read the article

• How to design service that can provide interface as JAX-WS web service, or via JMS, or as local meth

  - by kevinegham

  Using a typical JEE framework, how do I develop and deploy a service that can be called as a web service (with a WSDL interface), be invoked via JMS messages, or called directly from another service in the same container? Here's some more context: Currently I am responsible for a service (let's call it Service X) with the following properties: Interface definition is a human readable document kept up-to-date manually. Accepts HTTP form-encoded requests to a single URL. Sends plain old XML responses (no schema). Uses Apache to accept requests + a proprietary application server (not servlet or EJB based) containing all logic which runs in a seperate tier. Makes heavy use of a relational database. Called both by internal applications written in a variety of languages and also by a small number of third-parties. I want to (or at least, have been told to!): Switch to a well-known (pref. open source) JEE stack such as JBoss, Glassfish, etc. Split Service X into Service A and Service B so that we can take Service B down for maintenance without affecting Service A. Note that Service B will depend on (i.e. need to make requests to) Service A. Make both services easier for third parties to integrate with by providing at least a WS-I style interface (WSDL + SOAP + XML + HTTP) and probably a JMS interface too. In future we might consider a more lightweight API too (REST + JSON? Google Protocol Buffers?) but that's a nice to have. Additional consideration are: On a smaller deployment, Service A and Service B will likely to running on the same machine and it would seem rather silly for them to use HTTP or a message bus to communicate; better if they could run in the same container and make method calls to each other. Backwards compatibility with the existing ad-hoc Service X interface is not required, and we're not planning on re-using too much of the existing code for the new services. I'm happy with either contract-first (WSDL I guess) or (annotated) code-first development. Apologies if my terminology is a bit hazy - I'm pretty experienced with Java and web programming in general, but am finding it quite hard to get up to speed with all this enterprise / SOA stuff - it seems I have a lot to learn! I'm also not very used to using a framework rather than simply writing code that calls some packages to do things. I've got as far as downloading Glassfish, knocking up a simple WSDL file and using wsimport + a little dummy code to turn that into a WAR file which I've deployed.

  Read the article

• How to use SSL with a WCF web service?

  - by Martin

  I have a web service in asp.net running and everything works fine. Now I need to access some methods in that web-service using SSL. It works perfect when I contact the web-service using http:// but with https:// I get "There was no endpoint listening at https://...". Can you please help me on how to set up my web.config to support both http and https access to my web service. I have tried to follow guidelines but I can't get it working. Some code: My TestService.svc: [ServiceContract(Namespace = "")] [AspNetCompatibilityRequirements(RequirementsMode = AspNetCompatibilityRequirementsMode.Allowed)] public class TestService { [OperationContract] [WebGet(ResponseFormat = WebMessageFormat.Json)] public bool validUser(string email) { return true; } } My Web.config: <system.serviceModel> <serviceHostingEnvironment aspNetCompatibilityEnabled="true" multipleSiteBindingsEnabled="true" /> <behaviors> <endpointBehaviors> <behavior name="ServiceAspNetAjaxBehavior"> <enableWebScript /> </behavior> </endpointBehaviors> <serviceBehaviors> <behavior name="ServiceBehavior"> <serviceDebug includeExceptionDetailInFaults="true" /> </behavior> <behavior name=""> <serviceMetadata httpGetEnabled="true" /> <serviceDebug includeExceptionDetailInFaults="false" /> </behavior> </serviceBehaviors> </behaviors> <services> <service behaviorConfiguration="ServiceBehavior" name="TestService"> <endpoint address="" behaviorConfiguration="ServiceAspNetAjaxBehavior" binding="webHttpBinding" bindingConfiguration="ServiceBinding" contract="TestService" /> </service> </services> <bindings> <webHttpBinding> <binding name="ServiceBinding" maxBufferPoolSize="1000000" maxReceivedMessageSize="1000000"> <readerQuotas maxDepth="1000000" maxStringContentLength="1000000" maxArrayLength="1000000" maxBytesPerRead="1000000" maxNameTableCharCount="1000000"/> </binding> </webHttpBinding> </bindings> </system.serviceModel>

  Read the article

• Java error - not a statement, what does this mean?

  - by user2898828

  I am trying to get my code to create the new constructor objects which I require to create a mobile phone object. I have tried naming the constuctor fields to create the object. when I compile my code on this line this.Mobile samsungPhone = new Mobile("Samsung", 1, 2, "verizon", 3 "GPS"); I get this error: not a statement, what does this mean?? UPDATED CODE! my code: /** * to write a simple java class Mobile that models a mobile phone. * * @author (Lewis Burte-Clarke) * @version (14/10/13) */ public class Mobile { // type of phone private String phonetype; // size of screen in inches private int screensize; // menory card capacity private int memorycardcapacity; // name of present service provider private String serviceprovider; // type of contract with service provider private int typeofcontract; // camera resolution in megapixels private int cameraresolution; // the percentage of charge left on the phone private int checkcharge; // wether the phone has GPS or not private String GPS; // instance variables - replace the example below with your own private int x; // The constructor method public Mobile(String mobilephonetype, int mobilescreensize, int mobilememorycardcapacity,int mobilecameraresolution,String mobileGPS, String newserviceprovider) { this.phonetype = mobilephonetype; this.screensize = mobilescreensize; this.memorycardcapacity = mobilememorycardcapacity; this.cameraresolution = mobilecameraresolution; this.GPS = mobileGPS; this.serviceprovider = newserviceprovider; this.typeofcontract = 12; this.checkcharge = checkcharge; // you do not use this ones during instantiation,you can remove them if you do not need or assign them some default values Mobile samsungPhone = new Mobile("Samsung", 1, 2, "verizon", 3, "GPS"); 1024 = screen size; 2 = memory card capacity; 3=resolution; GPS = gps; "verizon"=service provider; typeofcontract = 12; checkcharge = checkcharge; } } // A method to display the state of the object to the screen public void displayMobileDetails() { System.out.println("phonetype: " + phonetype); System.out.println("screensize: " + screensize); System.out.println("memorycardcapacity: " + memorycardcapacity); System.out.println("cameraresolution: " + cameraresolution); System.out.println("GPS: " + GPS); System.out.println("serviceprovider: " + serviceprovider); System.out.println("typeofcontract: " + typeofcontract); } } class mymobile { public static void) { Mobile Samsung = new Mobile("Samsung", 1, 2, "verizon", 3, "GPS"); Mobile Blackberry = new Mobile("Blackberry", "3.", "4","8", "GPS"); Samsung.displayMobileDetails(); Blackberry.displayMobileDetails(); } } any answers and replies would be greatly appreciated!

  Read the article

• How do I defer execution of some Ruby code until later and run it on demand in this scenario?

  - by Kyle Kaitan

  I've got some code that looks like the following. First, there's a simple Parser class for parsing command-line arguments with options. class Parser def initialize(&b); ...; end # Create new parser. def parse(args = ARGV); ...; end # Consume command-line args. def opt(...); ...; end # Declare supported option. def die(...); ...; end # Validation handler. end Then I have my own Parsers module which holds some metadata about parsers that I want to track. module Parsers ParserMap = {} def self.make_parser(kind, desc, &b) b ||= lambda {} module_eval { ParserMap[kind] = {:desc => "", :validation => lambda {} } ParserMap[kind][:desc] = desc # Create new parser identified by `<Kind>Parser`. Making a Parser is very # expensive, so we defer its creation until it's actually needed later # by wrapping it in a lambda and calling it when we actually need it. const_set(name_for_parser(kind), lambda { Parser.new(&b) }) } end # ... end Now when you want to add a new parser, you can call make_parser like so: make_parser :db, "login to database" do # Options that this parser knows how to parse. opt :verbose, "be verbose with output messages" opt :uid, "user id" opt :pwd, "password" end Cool. But there's a problem. We want to optionally associate validation with each parser, so that we can write something like: validation = lambda { |parser, opts| parser.die unless opts[:uid] && opts[:pwd] # Must provide login. } The interface contract with Parser says that we can't do any validation until after Parser#parse has been called. So, we want to do the following: Associate an optional block with every Parser we make with make_parser. We also want to be able to run this block, ideally as a new method called Parser#validate. But any on-demand method is equally suitable. How do we do that?

  Read the article

• Encapsulating a Windows.Forms.Button

  - by devoured elysium

  I want to define a special kind of button that only allows two possible labels: "ON" and "OFF". I decided to inherit from a Windows.Forms.Button to implement this but now I don't know I how should enforce this rule. Should I just override the Text property like this? public override string Text { set { throw new InvalidOperationException("Invalid operation on StartStopButton!"); } } The problem I see with this is that I am breaking the contract that all buttons should have. If any code tries something like foreach (Button button in myForm) { button.Text = "123"; } they will get an Exception if I have any of my special buttons on the form, which is something that isn't expectable. First, because people think of properties just as "public" variables, not methods, second, because they are used to using and setting whatever they want to buttons without having to worry with Exceptions. Should I instead just make the set property do nothing? That could also lead to awkward results: myButton.Text = "abc"; MessageBox.Show(abc); //not "abc"! The general idea from the OO world is to in this kind of cases use Composition instead of inheritance. public class MySpecialButton : <Some class from System.Windows.Forms that already knows how to draw itself on forms> private Button button = new Button(); //I'd just draw this button on this class //and I'd then only show the fields I consider //relevant to the outside world. ... } But to make the Button "live" on a form it must inherit from some special class. I've looked on Control, but it seems to already have the Text property defined. I guess the ideal situation would be to inherit from some kind of class that wouldn't even have the Text property defined, but that'd have position, size, etc properties available. Upper in the hierarchy, after Control, we have Component, but that looks like a really raw class. Any clue about how to achieve this? I know this was a long post :( Thanks

  Read the article

• Week in Geek: USDA Chooses Microsoft for Cloud Services Edition

  - by Asian Angel

  This week we learned how to create geeky LED holiday lights with old bottles, dig deeper in Windows Defrag via the command prompt, use Google Chrome’s drag/drop feature to upload files easier, find great gift recommendations by looking through the How-To Geek holiday gift guide, and have fun adding Merry Christmas fonts to our computers. Photo by ntr23. Random Geek Links It has been a busy week, so we have extra news link goodness with information that is good for you to know. USDA making the move to Microsoft The U.S. Department of Agriculture has announced that it has chosen Microsoft to host things like e-mail, instant messaging, and collaboration through the software giant’s Business Productivity Online Suite. Google says it was cut off from USDA project bid Google is claiming that it was not given a chance to bid on a cloud-computing project for the U.S. Department of Agriculture, for which the contract was awarded to rival Microsoft. Apache is being forced into a Java Fork When Oracle rolled over Apache and Google’s objections to its Java plans in December, the scene was set for Apache to leave and, eventually, force a Java code fork. Tumblr explains daylong outage After experiencing an outage that started on Sunday afternoon and stretched through most of the day yesterday, Tumblr has explained what happened. Google demos Chrome OS, launches pilot program During a press briefing this week in San Francisco, Google launched the Chrome application store and demonstrated Chrome OS, its browser-centric netbook operating system. Don’t expect Spotify in U.S. this holiday season As of last week, Spotify had yet to sign a single licensing deal with a major label, after spending more than a year negotiating, multiple music sources told CNET. December 2010 Patch Tuesday will come with most bulletins ever According to the Microsoft Security Response Center, Microsoft will issue 17 Security Bulletins addressing 40 vulnerabilities on Tuesday, December 14. It will also host a webcast to address customer questions the following day. Hacker plants back door in Symbian firmware Indian hacker Atul Alex has had a look at the firmware for Symbian S60 smartphones and come up with a back door for it. PC quarantines raise tough complexities The concept of quarantining PCs to prevent widespread infection is “interesting, but difficult to implement, with far too many problems”, said security experts. Symantec: DDoS attacks hard to defend It has surfaced that the distributed denial of service (DDoS) attacks on Visa and MasterCard Web sites on Wednesday were carried out by a toolkit known as low orbit ion cannon (LOIC). Web Sockets and the risks of unfinished standards Enthusiasm for a promising new standard called Web Sockets has quickly cooled in some quarters as a potential security problem led some browser makers to hastily postpone support. Internet Explorer 9 to get tracking protection Microsoft is making changes to Internet Explorer 9’s security features that will better enable users to keep sites from tracking their activity across browsing sessions. NASA sold PCs with sensitive data NASA failed to remove sensitive data from computers that it sold, according to an audit report released this week. Cybercrooks create fake Amazon receipts The bad guys have created yet another online scam, this one involving fake Amazon receipts. World of Warcraft character move fees waived Until December 22, Blizzard will allow free realm transfers from 25 highly populated servers to alleviate log-in queues or performance issues. (The free transfers are one-way and one-time only.) SpaceX Dragon reaches orbit atop a Falcon with a fiery tail The Space Exploration Technologies corporation has become the first nongovernmental entity to put a vehicle into low Earth orbit. Geek Video of the Week If birds have wings, then why are the Angry Birds using slingshots? Photo by Dorkly Bits. Wait… Birds have Wings, Why are the Angry Ones Using Slingshots? Sysadmin Geek Tips How To Setup Email Alerts on Linux Using Gmail or SMTP Linux machines may require administrative intervention in countless ways, but without manually logging into them how would you know about it? Here’s how to setup emails to get notified when your machines want some tender love and attention. Random TinyHacker Links Red Panda Webcam Support Firefox and the Knoxville Zoo’s Red Panda program. Christmas Icons (Icons we like) Superb set of holiday icons by lgp85 at deviantArt. Download the .zip and use as .png or convert to .ico at Convertico.com or with tiny app Imagicon. Super User Questions Enjoy reading the great answers to this week’s popular questions from Super User Useful USB boot disks? DVD/CD burning .zip: is it more reliable, faster, longer lasting to burn a zip of files rather than the files as a folder? What are other ways to backup my files if I do not have an external drive? Anti virus what is the difference between these all? How can I block all Facebook elements/content? How-To Geek Weekly Article Recap Have you had a busy week between work and preparing for the holidays? Get caught up on your HTG reading with our hottest articles of the week. 20 Windows Keyboard Shortcuts You Might Not Know The 50 Best Registry Hacks that Make Windows Better LCD? LED? Plasma? The How-To Geek Guide to HDTV Technology HTG Explains: Which Linux File System Should You Choose? How to Use and Customize Google Chrome Web Apps One Year Ago on How-To Geek This week’s batch of retro geeky goodness is all about customizing Windows 7. ClassicShell Adds Classic Start Menu and Explorer Features to Windows 7 Get an Aero-Styled Classic Start Menu in Windows 7 Customize the Windows 7 Logon Screen Get the Classic Style Network Activity Indicator Back in Windows 7 How To Enable Check Boxes for Items In Windows 7 The Geek Note We would like you to join us in welcoming Jason Fitzpatrick to the writing staff here at How-To Geek. He started with us this past week, so take some time to read through his articles about the Wii, Kindle, & PlayStation 2 Peripherals and leave a friendly comment to say “Hi”! Got a great tip to share? Make sure to send it in to us at [email protected]. Photo by real00. Latest Features How-To Geek ETC The 50 Best Registry Hacks that Make Windows Better The How-To Geek Holiday Gift Guide (Geeky Stuff We Like) LCD? LED? Plasma? The How-To Geek Guide to HDTV Technology The How-To Geek Guide to Learning Photoshop, Part 8: Filters Improve Digital Photography by Calibrating Your Monitor Our Favorite Tech: What We’re Thankful For at How-To Geek Settle into Orbit with the Voyage Theme for Chrome and Iron Awesome Safari Compass Icons Set Escape from the Exploding Planet Wallpaper Move Your Tumblr Blog to WordPress Pytask is an Easy to Use To-Do List Manager for Your Ubuntu System Snowy Christmas House Personas Theme for Firefox

  Read the article

• CodePlex Daily Summary for Friday, February 19, 2010

  CodePlex Daily Summary for Friday, February 19, 2010New ProjectsApplication Management Library: Application Management makes your application life easier. It will automatic do memory management, handle and log unhandled exceptions, profiling y...Audio Service - Play Wave Files From Windows Service: This is a windows service that Check a registry key, when the key is updated with a new wave file path the service plays the wave file.Aviamodels: 3d drawing AviamodelsControl of payment proofs program for Greek citizens: This is a program that is used for Greek citizens who want to keep track of their payment proofs.Cover Creator: Cover Creator gives you the possibility to create and print CD covers. Content of CD is taken from http://www.freedb.org/ or can be added/modyfied ...DevBoard: DevBoard is a webbased scrum tool that helps developers/team get a clear overview of the project progress. It's developed in C# and silverlight.Flex AdventureWorks: The is mostly a skunk-works application to help me get acclimated to CodePlex. The long term goal is to integrate a Flex UI with the AdventureWor...GRE Wordlist: An intuitive and customizable word list for GRE aspirants. Developed in Java using a word list similar to Barron's.Indexer: A desktop file Index and Search tool which allows you to choose a list of folders to index, and then search on later. It is based on Lucene.net an...Project Management Office (PMO) for SharePoint: Sample web part for the Code Mastery event in Boston, February 11, 2010.Restart SQL Audit Policy and Job: Resolve SQL 2008 Audit Network Connectivity Issue.Rounded Corners / DIV Container: The RoundedDiv round corners container is a skin-able, CSS compliant UI control. Select which corners should be rounded, collapse and expand the c...Silverlight Google Search Application: The Silverlight Google Search Application uses Google Search API and behaves like Internet Search Application with option to preview desired page i...Weather Forecast Control: MyWeather forecast control pulls up to date weather forecast information from The Weather Channel for your website.New ReleasesApplication Management Library: ApplicationManagement v1.0: First ReleaseAudio Service - Play Wave Files From Windows Service: Audio Service v1.0: This is a working version of the Audio Service. Please use as you need to.AutoMapper: 1.0.1 for Silverlight 3.0 Alpha: AutoMapper for Silverlight 3.0. Features not supported: IDataReader mapping IListSource mapping All other features are supported.Buzz Dot Net: Buzz Dot Net v.1.10219: Buzz Dot Net Library (Parser & Objects) + WPF Example (using MVVM & Threading)Canvas VSDOC Intellisense: V 1.0.0.0a: This release contains two JavaScript files: canvas-utils.js (can be referenced in both runtime and development environment) canvas-vsdoc.js (must ...Control of payment proofs program for Greek citizens: Payment Proofs: source codeCourier: Beta 2: Added Rx Framework support and re-factored how message registration and un-registration works Blog post explaining the updates and re-factoring c...Cover Creator: Initial release: This is initial stable release. For now only in Polish language.Employee Scheduler: Employee Scheduler 2.2: Small Bug found. Small total hour calculation bug. See http://employeescheduler.codeplex.com/WorkItem/View.aspx?WorkItemId=6059 Extract the files...EnhSim: Release v1.9.7.1: Release v1.9.7.1Implemented Dislodged Foreign Object trinket Whispering Fanged Skull now also procs off Flame shock dots You can toggle bloodlust o...Extend SmallBasic: Teaching Extensions v.007: added SimpleSquareTest added Tortoise.Approve() for virtual proctor how to use virtual proctor: change the path in the proctor.txt file (located i...FolderSize: FolderSize.Win32.1.0.1.0: FolderSize.Win32.1.0.1.0 A simple utility intended to be used to scan harddrives for the folders that take most place and display this to the user...GLB Virtual Player Builder: v0.4.0 Beta: Allows for user to import and use archetypes for building players. The archetypes are contained in the file "archetypes.xml". This file is editab...Google Map WebPart from SharePoint List: GMap Stable Release: GMap Stable ReleaseHenge3D Physics Library for XNA: Henge3D Source (2010-02 R2): Fixed a build error related to an assembly attribute in XBOX 360 builds. Tweaked the controls in the sample when targeting the 360. Reduced the...Indexer: Beta Release 1: Just the initial/rough cut.NukeCS: NukeCS 5.2.3 Source Code: update version to 5.2.3ODOS: ODOS STABLE 1.5.0: Thank you for your patience while we develop this version. Not that much has been added, though. Just doing some sub-conscious stuff to make life...PoshBoard: PoshBoard 3.0 Beta 1: Welcome to the first beta release of PoshBoard 3.0 ! IMPORTANT WARNING : this release is absolutly not feature complete and is error-prone. Okay, ...Restart SQL Audit Policy and Job: Restart SQL 2008 Audit Policy and Job: This folder contains three pieces of source code: Server Audit Status (Started).xml - Import this on-schedule policy into your server's Policy-Ba...SAL- Self Artificial Learning: Artificial Learning 2AQV Working Proof Of Concept: This is the Simulation proof of concept version that comes after the 1aq version. AQ stands for Anwering Questions.SharePoint 2010 Word Automation: SP 2010 Word Automation - Workflow Actions 1.1: This release includes two new custom workflow activities for SharePoint designer Convert Folder Convert Library More information about these new...SharePoint Outlook Connector: Version 1.0.1.1: Exception Logging has been improved.Sharpy: Sharpy 1.2 Alpha: This is the third Sharpy release. A change has been made to allow overriding the master page from the controller. The release contains the single ...Silverlight Google Search Application: SL Google Search App Alpha: This is just a first alpha version of the application, as it looks like when I uploaded it to CodePlex. The application works, requires Silverlight...Starter Kit Mytrip.Mvc.Entity: Mytrip.Mvc.Entity 1.0 RC: EF Membership UserManager FileManager Localization Captcha ClientValidation Theme CrossBrowser VS 2010 RC MVC 2 RC db MSSQL2008thinktecture WSCF.blue: WSCF.blue V1 Update (1.0.6): This release is an update for WSCF.blue V1. Below are the bug fixes made since the V1.0.5 release: The data contract type filter was not including...TS3QueryLib.Net: TS3QueryLib.Net Version 0.18.13.0: Changelog Added overloads to all methods of QueryRunenr class handling permission tasks to allow passing of permission name instead of permissionid...Umbraco CMS: Umbraco 4.1 Beta 2: This is the second beta of Umbraco 4.1. Umbraco 4.1 is more advanced than ever, yet faster, lighter and simpler to use than ever. We, on behalf of...VCC: Latest build, v2.1.30218.0: Automatic drop of latest buildZack's Fiasco - Code Generated DAL: v1.2.4: Enhancements: SQL Server CRUD Stored Procedures added option for USE <db> added option to create or not create INSERT sprocs added option to cr...Most Popular ProjectsRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)Image Resizer Powertoy Clone for WindowsASP.NETMicrosoft SQL Server Community & SamplesDotNetNuke® Community EditionMost Active ProjectsRawrSharpyDinnerNow.netBlogEngine.NETjQuery Library for SharePoint Web ServicesNB_Store - Free DotNetNuke Ecommerce Catalog Modulepatterns & practices – Enterprise LibraryPHPExcelFacebook Developer ToolkitFluent Ribbon Control Suite

  Read the article

• Week in Geek: US Govt E-card Scam Siphons Confidential Data Edition

  - by Asian Angel

  This week we learned how to “back up photos to Flickr, automate repetitive tasks, & normalize MP3 volume”, enable “stereo mix” in Windows 7 to record audio, create custom papercraft toys, read up on three alternatives to Apple’s flaky iOS alarm clock, decorated our desktops & app docks with Google icon packs, and more. Photo by alexschlegel. Random Geek Links It has been a busy week on the security & malware fronts and we have a roundup of the latest news to help keep you updated. Photo by TopTechWriter.US. US govt e-card scam hits confidential data A fake U.S. government Christmas e-card has managed to siphon off gigabytes of sensitive data from a number of law enforcement and military staff who work on cybersecurity matters, many of whom are involved in computer crime investigations. Security tool uncovers multiple bugs in every browser Michal Zalewski reports that he discovered the vulnerability in Internet Explorer a while ago using his cross_fuzz fuzzing tool and reported it to Microsoft in July 2010. Zalewski also used cross_fuzz to discover bugs in other browsers, which he also reported to the relevant organisations. Microsoft to fix Windows holes, but not ones in IE Microsoft said that it will release two security bulletins next week fixing three holes in Windows, but it is still investigating or working on fixing holes in Internet Explorer that have been reportedly exploited in attacks. Microsoft warns of Windows flaw affecting image rendering Microsoft has warned of a Windows vulnerability that could allow an attacker to take control of a computer if the user is logged on with administrative rights. Windows 7 Not Affected by Critical 0-Day in the Windows Graphics Rendering Engine While confirming that details on a Critical zero-day vulnerability have made their way into the wild, Microsoft noted that customers running the latest iteration of Windows client and server platforms are not exposed to any risks. Microsoft warns of Office-related malware Microsoft’s Malware Protection Center issued a warning this week that it has spotted malicious code on the Internet that can take advantage of a flaw in Word and infect computers after a user does nothing more than read an e-mail. *Refers to a flaw that was addressed in the November security patch releases. Make sure you have all of the latest security updates installed. Unpatched hole in ImgBurn disk burning application According to security specialist Secunia, a highly critical vulnerability in ImgBurn, a lightweight disk burning application, can be used to remotely compromise a user’s system. Hole in VLC Media Player Virtual Security Research (VSR) has identified a vulnerability in VLC Media Player. In versions up to and including 1.1.5 of the VLC Media Player. Flash Player sandbox can be bypassed Flash applications run locally can read local files and send them to an online server – something which the sandbox is supposed to prevent. Chinese auction site touts hacked iTunes accounts Tens of thousands of reportedly hacked iTunes accounts have been found on Chinese auction site Taobao, but the company claims it is unable to take action unless there are direct complaints. What happened in the recent Hotmail outage Mike Schackwitz explains the cause of the recent Hotmail outage. DOJ sends order to Twitter for Wikileaks-related account info The U.S. Justice Department has obtained a court order directing Twitter to turn over information about the accounts of activists with ties to Wikileaks, including an Icelandic politician, a legendary Dutch hacker, and a U.S. computer programmer. Google gets court to block Microsoft Interior Department e-mail win The U.S. Federal Claims Court has temporarily blocked Microsoft from proceeding with the $49.3 million, five-year DOI contract that it won this past November. Google Apps customers get email lockdown Companies and organisations using Google Apps are now able to restrict the email access of selected users. LibreOffice Is the Default Office Suite for Ubuntu 11.04 Matthias Klose has announced some details regarding the replacement of the old OpenOffice.org 3.2.1 packages with the new LibreOffice 3.3 ones, starting with the upcoming Ubuntu 11.04 (Natty Narwhal) Alpha 2 release. Sysadmin Geek Tips Photo by Filomena Scalise. How to Setup Software RAID for a Simple File Server on Ubuntu Do you need a file server that is cheap and easy to setup, “rock solid” reliable, and has Email Alerting? This tutorial shows you how to use Ubuntu, software RAID, and SaMBa to accomplish just that. How to Control the Order of Startup Programs in Windows While you can specify the applications you want to launch when Windows starts, the ability to control the order in which they start is not available. However, there are a couple of ways you can easily overcome this limitation and control the startup order of applications. Random TinyHacker Links Using Opera Unite to Send Large Files A tutorial on using Opera Unite to easily send huge files from your computer. WorkFlowy is a Useful To-do List Tool A cool to-do list tool that lets you integrate multiple tasks in one single list easily. Playing Flash Videos on iOS Devices Yes, you can play flash videos on jailbroken iPhones. Here’s a tutorial. Clear Safari History and Cookies On iPhone A tutorial on clearing your browser history on iPhone and other iOS devices. Monitor Your Internet Usage Here’s a cool, cross-platform tool to monitor your internet bandwidth. Super User Questions See what the community had to say on these popular questions from Super User this week. Why is my upload speed much less than my download speed? Where should I find drivers for my laptop if it didn’t come with a driver disk? OEM Office 2010 without media – how to reinstall? Is there a point to using theft tracking software like Prey on my laptop, if you have login security? Moving an “all-in-one” PC when turned on/off How-To Geek Weekly Article Recap Get caught up on your HTG reading with our hottest articles from this past week. How to Combine Rescue Disks to Create the Ultimate Windows Repair Disk How To Boot 10 Different Live CDs From 1 USB Flash Drive What is Camera Raw, and Why Would a Professional Prefer it to JPG? Did You Know Facebook Has Built-In Shortcut Keys? The How-To Geek Guide to Audio Editing: The Basics One Year Ago on How-To Geek Enjoy looking through our latest gathering of retro article goodness. Learning Windows 7: Create a Homegroup & Join a New Computer To It How To Disconnect a Machine from a Homegroup Use Remote Desktop To Access Other Computers On a Small Office or Home Network How To Share Files and Printers Between Windows 7 and Vista Allow Users To Run Only Specified Programs in Windows 7 The Geek Note That is all we have for you this week and we hope your first week back at work or school has gone very well now that the holidays are over. Know a great tip? Send it in to us at [email protected]. Photo by Pamela Machado. Latest Features How-To Geek ETC HTG Projects: How to Create Your Own Custom Papercraft Toy How to Combine Rescue Disks to Create the Ultimate Windows Repair Disk What is Camera Raw, and Why Would a Professional Prefer it to JPG? The How-To Geek Guide to Audio Editing: The Basics How To Boot 10 Different Live CDs From 1 USB Flash Drive The 20 Best How-To Geek Linux Articles of 2010 Arctic Theme for Windows 7 Gives Your Desktop an Icy Touch Install LibreOffice via PPA and Receive Auto-Updates in Ubuntu Creative Portraits Peek Inside the Guts of Modern Electronics Scenic Winter Lane Wallpaper to Create a Relaxing Mood Access Your Web Apps Directly Using the Context Menu in Chrome The Deep – Awesome Use of Metal Objects as Deep Sea Creatures [Video]

  Read the article

• Compiling examples for consuming the REST Endpoints for WCF Service using Agatha

  - by REA_ANDREW

  I recently made two contributions to the Agatha Project by Davy Brion over on Google Code, and one of the things I wanted to follow up with was a post showing examples and some, seemingly required tid bits.  The contributions which I made where: To support StructureMap To include REST (JSON and XML) support for the service contract The examples which I have made, I want to format them so they fit in with the current format of examples over on Agatha and hopefully create and submit a third patch which will include these examples to help others who wish to use these additions. Whilst building these examples for both XML and JSON I have learnt a couple of things which I feel are not really well documented, but are extremely good practice and once known make perfect sense.  I have chosen a real basic e-commerce context for my example Requests and Responses, and have also made use of the excellent tool AutoMapper, again on Google Code. Setting the scene I have followed the Pipes and Filters Pattern with the IQueryable interface on my Repository and exposed the following methods to query Products: IQueryable<Product> GetProducts(); IQueryable<Product> ByCategoryName(this IQueryable<Product> products, string categoryName) Product ByProductCode(this IQueryable<Product> products, String productCode) I have an interface for the IProductRepository but for the concrete implementation I have simply created a protected getter which populates a private List<Product> with 100 test products with random data.  Another good reason for following an interface based approach is that it will demonstrate usage of my first contribution which is the StructureMap support.  Finally the two Domain Objects I have made are Product and Category as shown below: public class Product { public String ProductCode { get; set; } public String Name { get; set; } public Decimal Price { get; set; } public Decimal Rrp { get; set; } public Category Category { get; set; } }   public class Category { public String Name { get; set; } }   Requirements for the REST Support One of the things which you will notice with Agatha is that you do not have to decorate your Request and Response objects with the WCF Service Model Attributes like DataContract, DataMember etc… Unfortunately from what I have seen, these are required if you want the same types to work with your REST endpoint.  I have not tried but I assume the same result can be achieved by simply decorating the same classes with the Serializable Attribute.  Without this the operation will fail. Another surprising thing I have found is that it did not work until I used the following Attribute parameters: Name Namespace e.g. [DataContract(Name = "GetProductsRequest", Namespace = "AgathaRestExample.Service.Requests")] public class GetProductsRequest : Request { }   Although I was surprised by this, things kind of explained themselves when I got round to figuring out the exact construct required for both the XML and the REST.  One of the things which you already know and are then reminded of is that each of your Requests and Responses ultimately inherit from an abstract base class respectively. This information needs to be represented in a way native to the format being used.  I have seen this in XML but I have not seen the format which is required for the JSON. JSON Consumer Example I have used JQuery to create the example and I simply want to make two requests to the server which as you will know with Agatha are transmitted inside an array to reduce the service calls.  I have also used a tool called json2 which is again over at Google Code simply to convert my JSON expression into its string format for transmission.  You will notice that I specify the type of Request I am using and the relevant Namespace it belongs to.  Also notice that the second request has a parameter so each of these two object are representing an abstract Request and the parameters of the object describe it. <script type="text/javascript"> var bodyContent = $.ajax({ url: "http://localhost:50348/service.svc/json/processjsonrequests", global: false, contentType: "application/json; charset=utf-8", type: "POST", processData: true, data: JSON.stringify([ { __type: "GetProductsRequest:AgathaRestExample.Service.Requests" }, { __type: "GetProductsByCategoryRequest:AgathaRestExample.Service.Requests", CategoryName: "Category1" } ]), dataType: "json", success: function(msg) { alert(msg); } }).responseText; </script>   XML Consumer Example For the XML Consumer example I have chosen to use a simple Console Application and make a WebRequest to the service using the XML as a request.  I have made a crude static method which simply reads from an XML File, replaces some value with a parameter and returns the formatted XML.  I say crude but it simply shows how XML Templates for each type of Request could be made and then have a wrapper utility in whatever language you use to combine the requests which are required.  The following XML is the same Request array as shown above but simply in the XML Format. <?xml version="1.0" encoding="utf-8" ?> <ArrayOfRequest xmlns="http://schemas.datacontract.org/2004/07/Agatha.Common" xmlns:i="http://www.w3.org/2001/XMLSchema-instance"> <Request i:type="a:GetProductsRequest" xmlns:a="AgathaRestExample.Service.Requests"/> <Request i:type="a:GetProductsByCategoryRequest" xmlns:a="AgathaRestExample.Service.Requests"> <a:CategoryName>{CategoryName}</a:CategoryName> </Request> </ArrayOfRequest>   It is funny because I remember submitting a question to StackOverflow asking whether there was a REST Client Generation tool similar to what Microsoft used for their RestStarterKit but which could be applied to existing services which have REST endpoints attached.  I could not find any but this is now definitely something which I am going to build, as I think it is extremely useful to have but also it should not be too difficult based on the information I now know about the above.  Finally I thought that the Strategy Pattern would lend itself really well to this type of thing so it can accommodate for different languages. I think that is about it, I have included the code for the example Console app which I made below incase anyone wants to have a mooch at the code.  As I said above I want to reformat these to fit in with the current examples over on the Agatha project, but also now thinking about it, make a Documentation Web method…{brain ticking} :-) Cheers for now and here is the final bit of code: static void Main(string[] args) { var request = WebRequest.Create("http://localhost:50348/service.svc/xml/processxmlrequests"); request.Method = "POST"; request.ContentType = "text/xml"; using(var writer = new StreamWriter(request.GetRequestStream())) { writer.WriteLine(GetExampleRequestsString("Category1")); } var response = request.GetResponse(); using(var reader = new StreamReader(response.GetResponseStream())) { Console.WriteLine(reader.ReadToEnd()); } Console.ReadLine(); } static string GetExampleRequestsString(string categoryName) { var data = File.ReadAllText(Path.Combine(Path.GetDirectoryName(Assembly.GetExecutingAssembly().Location), "ExampleRequests.xml")); data = data.Replace("{CategoryName}", categoryName); return data; } }

  Read the article

< Previous Page | 46 47 48 49 50 51 52 53 54 55  | Next Page >