Search Results

Search found 2566 results on 103 pages for 'dr amd'.

Page 50/103 | < Previous Page | 46 47 48 49 50 51 52 53 54 55 56 57  | Next Page >

  • Failed 12.04 installation

    - by Rob Sayer
    I tried installing Ubuntu 12.04 today. Not an upgrade, a new installation. It didn't work. My computer specs: Computer: Compaq presario CQ-104CA OS: Windows 7 Home 64 bit CPU: AMD V140 BIOS: latest Graphics: amd m880g with ati mobility radeon hd 4250 Wireless: atheros ar9285 Internal HD:SATA I wasn't connected to the internet at the time ... I know of a number of people who have installed ubuntu unconnected and just updated later. It seemed to go normally until I got to the part where I chose to install dual boot linux/windows. Then, the screen went black and the following test appeared (I left out the [OK]'s): checking battery state starting crash report submission daemon stating cpu interrupts balancing daemon stopping system V runlevel compatibility starting configure network device security stopping configure network device security stopping cold plug devices stopping log initial device creation starting enable remaining boot-time encrypting devices starting configure network device security starting save udev log and update rules stopping save udev log and update rules stopping enable remaining boot-time encrypted block devices checking for running unattended-upgrades acpid: exiting speech-dispatcher disabled: edit /etc/default/speech-disorder At this point, the CD is ejected. Then nothing. If I press the return key, it boots Windows. I don't think that's what's supposed to happen. Thinking the cd media or dvd drive may have been faulty, I downloaded the .iso again and made a bootable USB stick, as per your instructions. This time there was no cryptic crash screen. It just booted windows. I can't find any log files it may have left. Thinking the amd64 version may have been the wrong one, I tried downloading the x86 version. Same thing, both from cd and usb drive. Note I downloaded both files twice. I doubt it was a corrupted d/l. This is supposed to be a simple, transparent install. I went to the time and trouble of looking up my devices and drivers re ubuntu beforehand, and was prepared to do some configuration, though I know someone who has the same wireless device and his worked righted out of the box. But I spent over 3 hours trying to install it with only the above to show for it.

    Read the article

  • ABC GNU/Linux

    <b>Dr. Dobbs:</b> "Live, installable Linux distribution that communicates between clusters of computers so that they can work in parallel"

    Read the article

  • The Art of Dealing with People

    Technical people generally don't easily adapt to being good salespeople. When a technical person takes on a customer-facing role as a support engineer, there are a whole lot of new skills required. Dr Petrova relates how the experience of a change in job gave her a new respect for the skills of sales and marketing.

    Read the article

  • Installation problem ubuntu 12.04 with hp Pavilion dv4 3006tx laptop

    - by akeeb
    I am trying to install ubuntu 12.04 in my laptop containing model is HP Pavilion dv4 3006 tx , it has 1GB Graphics card( Video Graphics AMD Radeon HD 6750M (1 GB DDR5) ). Installation process is taken by my laptop but there are problem when rebooting it . When i want to open ubuntu as my operating system it does't open , my laptop Display turn off . more info about my pc configuration pls visit: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c02780984&jumpid=reg_R1002_USEN#A1 Collapse this comment

    Read the article

  • Evaluating and Investigating Drug Safety Signals with Public Databases Webinar

    - by Roxana Babiciu
    In this one-hour webinar, BioPharm Systems' Dr. Rodney Lemery, vice president of safety and pharmacovigilance, will review a number of public databases available to use during the evaluation and investigation of identified safety signals. The discussion will focus on the use of free and paid longitudinal healthcare databases available online. After attending this presentation, you will better understand how these data sources can be used in your daily PV work. Read more here

    Read the article

  • Minecraft running slow after 13.10 upgrade

    - by user204279
    What to took for when Minecraft is running slow (~10 FPS) after a simple Ubuntu upgrade (from 13.04 to 13.10) without any manual change in the hardware/software graphic configuration and in the Minecraft configuration? Before the upgrade, it was running very well everytime (~60 FPS constantly). Any help? lspci | grep "VGA compatible controller" 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Whistler [Radeon HD 6730M/6770M/7690M XT] (rev ff)

    Read the article

  • *Un*installing with Ubuntu Software Center (Centre) doesn't work on 64-bit 12.04.1

    - by likethesky
    Not sure if I'm doing something wrong, or if the .deb package I'm installing is broken in some way (I've built it, using NetBeans 7.2), or if indeed this is a bug in Software Center. When I install this particular 32-bit .deb on Ubuntu 10.04 LTS--all updates applied--(where it was built), GDebi shows it and has an 'Uninstall' button next to it. So it works fine to uninstall it there, via the GDebi GUI. However, when I install it on 12.04.1 LTS--all updates applied--it installs fine, but then does not show up in Ubuntu Software Center as available to be uninstalled. No combination of searching finds it. However, I can from the command line, do sudo apt-get purge javafxapplication1 and it finds it and deletes it. The same thing happens when I build a 64-bit .deb and attempt to install it to the same (64-bit AMD) or a different 64-bit Ubuntu 12.04.1 system. So it seems to be isolated to this NetBeans-generated .deb and the 64-bit AMD build (though I haven't tried it on a 32-bit 12.04.1 install yet). These are all on VirtualBox VMs, btw, if that matters. Any way to 'clean up' my Software Center and see if it's something I've done to get it in this state? Could this behavior be due to how this particular .deb has been built? (It doesn't have an 'Installed-Size' control field, so I do get the "Package is of bad quality" warning when I install it--which I do by clicking 'Ignore and install' button.) If you want all the gory details about why this happening--a bug has been reported against NetBeans for this behavior here: http://javafx-jira.kenai.com/browse/RT-25486 (EDIT: Just to be clear, the app installs fine, runs fine, all works as intended--I just can't get that 'bad package' message to go away, and now... I also can't uninstall it via Software Center, but rather, need to use sudo apt-get purge to uninstall it, after it installs. /END EDIT) Thanks for any pointers. I'm happy to report this as a bug against Ubuntu Software Center/Centre too, if that's what it seems to be, just tell me where to do so (a link). I'm a relative Ubuntu, NetBeans, and JavaFX newbie, though a long-time programmer. If I report it as a bug, I'll try it on the 32-bit build of 12.04.1 as well. Also, if I should add any more detail to the bug reported against NetBeans above, let me know--or feel free to add it yourself to the bug report above, if you would like. Thanks again!

    Read the article

  • Screen resolution is too low with open source drivers on Ubuntu 12.10

    - by Chintan Parikh
    I'm on an AMD graphics card. When I use the open source xserver-xorg-video-radeon driver, Gnome shell works fine but my screen resolution can't be set higher than 1024x768. However, when I'm on the closed source fglrx drivers, the screen resolution works fine, but gnome shell doesn't (it goes to gnome classic for some reason). Does anyone know how I can either get gnome shell to work with fglrx, or how I can set my screen resolution with xserver-xorg-video-radeon?

    Read the article

  • Simulating smooth movement along a line after calculating a collision containing a restitution of zero in 2D

    - by Casey
    [for tl;dr see after listing] //...Code to determine shapes types involved in collision here... //...Rectangle-Line collision detected. if(_rbTest->GetCollisionShape()->Intersects(*_ground->GetCollisionShape())) { //Convert incoming shape to a line. a2de::Line l(*dynamic_cast<a2de::Line*>(_ground->GetCollisionShape())); //Get line's normal. a2de::Vector2D normal_vector(l.GetSlope().GetY(), -l.GetSlope().GetX()); a2de::Vector2D::Normalize(normal_vector); //Accumulate forces involved. a2de::Vector2D intermediate_forces; a2de::Vector2D normal_force = normal_vector * _rbTest->GetMass() * _world->GetGravityHandler()->GetGravityValue(); intermediate_forces += normal_force; //Calculate final velocity: See [1] double Ma = _rbTest->GetMass(); a2de::Vector2D Ua = _rbTest->GetVelocity(); double Mb = _ground->GetMass(); a2de::Vector2D Ub = _ground->GetVelocity(); double mCr = Mb * _ground->GetRestitution(); a2de::Vector2D collision_velocity( ((Ma * Ua) + (Mb * Ub) + ((mCr * Ub) - (mCr * Ua))) / (Ma + Mb)); //Calculate reflection vector: See [2] a2de::Vector2D reflect_velocity( -collision_velocity + 2 * (a2de::Vector2D::DotProduct(collision_velocity, normal_vector)) * normal_vector ); //Affect velocity to account for restitution of colliding bodies. reflect_velocity *= (_ground->GetRestitution() * _rbTest->GetRestitution()); _rbTest->SetVelocity(reflect_velocity); //THE ULTIMATE ISSUE STEMS FROM THE FOLLOWING LINE: //Move object away from collision one pixel to prevent constant collision. _rbTest->SetPosition(_rbTest->GetPosition() + normal_vector); _rbTest->ApplyImpulse(intermediate_forces); } Sources: (1) Wikipedia: Coefficient of Restitution: Speeds after impact (2) Wikipedia: Specular Reflection: Direction of reflection First, I have a system in place to account for friction (that is, a coefficient of friction) but is not used right now (in addition, it is zero, which should not affect the math anyway). I'll deal with that after I get this working. Anyway, when the restitution of either object involved in the collision is zero the object stops as required, but if movement along the same direction (again, irrespective of the friction value that isn't used) as the line is attempted the object moves as if slogging through knee deep snow. If I remove the line of code in question and the object is not push away one pixel the object barely moves at all. All because the object collides, is stopped, is pushed up, collides, is stopped...etc. OR collides, is stopped, collides, is stopped, etc... TL;DR How do I only account for a collision ONCE for restitution purposes (BONUS: but CONTINUALLY for frictional purposes, to be implemented later)

    Read the article

  • Lag when recording with xvidcap?

    - by quangtruong1985
    I used Xvidcap to record my desktop, but the quality of video was too bad (it lagged so much). I also tried with all output formats that xvidcap support, increase the frame-per-second as much as possible and the quality always at 100% but nothing changed. Click to see my video on Youtube Im using 11.04 (unity) with compiz enabled. My card is ATI/AMD Mobility 5450 and all drivers were installed and activated. Please help me! Regards.

    Read the article

  • WORK PLANS in 10 Minutes

    Most productive people use some form of a work plan to sort out what they need to do and to guide them when they are doing the work. People generally agree that they need a work plan for new work, b... [Author: Dr Neil Miller - Computers and Internet - August 24, 2009]

    Read the article

  • Integrating Oracle Argus Safety with other Clinical Systems Using Argus Interchange's E2B Functionality

    - by Roxana Babiciu
    Over the past few years, companies conducting clinical trials have increasingly been interested in integrating their pharmacovigilance systems with other clinical and safety solutions to streamline their processes. Please join BioPharm Systems’ Dr. Rodney Lemery, vice president of safety and pharmacovigilance, for a one-hour webinar in which he will discuss the ability to integrate Oracle’s Argus Safety with other applications using the safety system’s inherent extended E2B functionality. Read more here

    Read the article

  • Misaligned Display on Resume

    - by Shaun Killingbeck
    I have an odd issue with my laptop display when resuming from suspend. When I have an additional monitor connected there is no issue. However without an additional monitor connected, after resuming only the left 10% of the laptop screen (just enough to show the Unity Launcher and a bit more) is visibly working, although strangely in a screenshot this same 10% is shown on the right hand side of the screenshot: I ran xrandr --verbose before and after resume, and the only difference (using diff) was: 2c2 < LVDS connected 1366x768+0+0 (0x98) normal (normal left inverted right x axis y axis) 344mm x 194mm --- > LVDS connected 1366x768+1280+0 (0x98) normal (normal left inverted right x axis y axis) 344mm x 194mm This seems to suggest the screen position has been shifted by 1280 horizontally, the width of the second monitor I use. Indeed, running the command xrandr --output LVDS --pos 0x0 does bring the screen back to normal. However, I don't want to have to run this command every time, I'd prefer to cure the source of the problem than just correct the symptoms. Any ideas on how to get Ubuntu to keep the display configuration settings from before suspend when it resumes? or why it changes at all? Heres some technical details that might be pertinent: HP Pavilion DV6 Laptop Ubuntu 13.04 AMD Radeon HD 6400M Series AMD Radeon HD 6520G Using proprietary flgrx-updates driver and amdcccle (Catalyst Control Center) (Unfortunately the open source driver causes my laptop to run even hotter than it already does, otherwise I'd use that) The contents of Xorg.conf: Section "ServerLayout" Identifier "amdcccle Layout" Screen 0 "amdcccle-Screen[0]-0" 0 0 EndSection Section "Module" Load "glx" EndSection Section "Monitor" Identifier "0-LVDS" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1280x768" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "0-CRT1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1280x768" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "1-LVDS" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "TargetRefresh" "60" Option "Position" "1280 0" Option "Rotate" "normal" Option "Disable" "false" Option "PreferredMode" "1366x768" EndSection Section "Monitor" Identifier "1-CRT1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" Option "PreferredMode" "1280x1024" EndSection Section "Device" Identifier "amdcccle-Device[0]-0" Driver "fglrx" Option "Monitor-LVDS" "1-LVDS" Option "Monitor-CRT1" "1-CRT1" BusID "PCI:0:1:0" EndSection Section "Device" Identifier "amdcccle-Device[0]-1" Driver "fglrx" Option "Monitor-LVDS" "1-LVDS" BusID "PCI:0:1:0" Screen 1 EndSection Section "Screen" Identifier "Default Screen" DefaultDepth 24 EndSection Section "Screen" Identifier "amdcccle-Screen[0]-0" Device "amdcccle-Device[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Virtual 2646 2646 Depth 24 EndSubSection EndSection Section "Screen" Identifier "amdcccle-Screen[0]-1" Device "amdcccle-Device[0]-1" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

    Read the article

  • Byobu not displaying correct CPU temptrature

    - by aserwin
    I have an AMD FX 8120 proccy that is overclocked to 4100Mhz. Since the overclocking, Byobu and other temprature reading apps (Conky, etc) do not read the temprature accurately. I can see the correct temp in the bios, and with no overclocking everything inside of Gnome reads correctly. Why should this be? It is (seemingly) obviously an issue with Ubuntu (or perhaps Gnome?). Has anyone else experienced this?

    Read the article

  • Live CD has black screen HP DV6

    - by Shaun Killingbeck
    Attempting to install/try ubuntu (11.10, 12.04) on my new laptop, using a liveCD (and tried USB). I get the purple screen (with the man/keyboard at the bottom) and after that the screen flashes bright white before going black. Ubuntu continues to load in the background, with login sound etc but the screen is off. I have tried as many different solutions as I could find including: using nomodestep, xforcevesa, i915.modeset=0, and also now i915.modeset=1 in boot options (seperately): varying consequences, but either I end up at a blinking cursor with no prompt, a command line (startx fails: no screen found), or the original blank screen again Tried booting from VirtualBox - it crashes at the same place the screen would go blank when using a CD/USB tried 11.04: I don't have this problem BUT when trying to install, I get a ubi-partman error 141 (possibly down to the three partitions that came on my laptop... not sure why HP needed there own separate partition for HP Tools...) Model: HP Pavillion DV6 6B08SA Processor: AMD Quad-Core A6-3410MX APU with Radeon HD 6545G2 Dual Graphics (1.6 GHZ 4 MB L2 cache ) Chipset: AMD RS880M Any help would be greatly appreciated. I just want to be able to partition the drive and install Ubuntu. I'm assuming the issue is graphics card related, although I have no confirmation of that. Update: Tried the ?orkarounds on https://wiki.ubuntu.com/X/Troubleshooting/BlankScreen - set gfxpayload=text changed nothing, removing splash did nothing and setting vesafb.nonsense=1 did nothing either. I'd like to be able to collect some log information somehow, but I can't get to a command line from the liveCD. tried using the latest 12.04 beta, same issue tried nomodeset without splash or quiet. get the following (tail of) output before it freezes on that screen: * Starting configure network device security [OK] * Starting configure network device [OK] [ 25.720899] ieee80211 phy0: w1_ops_config: change monitor mode: false (implement) [ 25.720923] ieee80211 phy0: w1_ops_config: change power-save mode: false (implement) * Starting restore sound card(s') mixer state(s) [fail] [ 25.721849] ieee80211 phy0: w1_ops_bss_info_changed: qos enabled: false (implement) * Stopping save kernel messages [OK] * Starting bluetooth [OK] * PulseAudio configured for per-user sessions saned disabled; edit /etc/default/saned [ 25.988016] hci_cmd_timer: hci0 command tx timeout [ 26.207225] bad LUN (0:1) [ 26.223735] bad target number (1:0) [ 26.252111] bad target number (2:0) [ 26.272170] bad target number (3:0) [ 26.300154] bad target number (4:0) [ 26.328162] bad target number (5:0) [ 26.344180] bad target number (6:0) [ 26.368142] bad target number (7:0) * Checking battery state... [OK] * Stopping System V runlevel capability [OK] Does this give any indication of the problem? the false (implement) messages also reappear when I press the power button to ask it to shutdown, followed by a [fail] status for killing remaining processes.

    Read the article

  • Ubuntu 12.04 Overheating HP Pavillion dm4 3011tx

    - by gevvek
    I have tried installing Ubuntu 12.04 on my HP Pavilion dm4 3011tx and after a few minutes the fans start to work very fast and my laptop starts to heat up; The CPU temperature got up to 70 degrees and was still rising before I turned the computer off. I installed the graphics drivers for my AMD Raedon graphics and tried switching to the integrated graphics but that didn't make a difference I have also tried Fedora and Linux Mint and they do the same thing. Can anyone help?

    Read the article

  • Facebook video is too choppy to watch.

    - by Greg Pauline
    Using firefox and chrome on an Acer Aspire 5100 with an AMD Turion 64 MK36 processor with 2GB of RAM and an ATI Radeon Xpress 110 Graphics card. I had a problem viewing Vimeo and youtube that has now been resolved with the help of this website. But now I find that trying to watch Facebook videos from family and friends is impossible due to the terrible choppy frame rate and near freezing of the browser window. Any idea what is going on and how to fix it?

    Read the article

  • What are the advantages of mainframes?

    - by Scott Weinstein
    The downsides of Mainframes is well trodden ground; expensive, legacy, dwindling community, etc. I'm not particularly interested in the downsides, but I am curious if there are any benefits to mainframe hardware/software over the current Intel/AMD & Linux/Windows environment. I've been told that MFs are particularly good (and better than current servers) at heavy I/O loads. Is this still true?

    Read the article

  • Social Networking at Professional Events

    Dr. Masha Petrova compresses, into a small space, much good advice on networking with other professional people. She draws from her own experience as a technical expert to provide a detailed checklist of things you should and shouldn't do at conferences or tradeshows to be a successful 'networker'. As usual, she delivers sage advice with a dash of humour.

    Read the article

  • Freeze after 'init-bottom' script before installation starts on a Lenovo G475

    - by NikitaBaksalyar
    I'm trying to install Ubuntu 11.04 x86 on a Lenovo G475 laptop (based on AMD Fusion), but installation freezes after loading ends on a splash screen. I've tried to run installation without quiet and splash parameters - but result is the same: installation freeze after running "init-bottom" script. I thought that it can be because of BIOS settings, but I've also tried to change them several times without any result.

    Read the article

  • apt-get command problem

    - by Ramesh Khadka
    I am using Ubuntu 12.04 32 bit in hp pavilion dv6 laptop (AMD Processor) after upgrade and reboot, the desktop doesn't start and at cui (cltr + alt + f1) I login to my user and following error shows: apt-config :/lib/i386-linux-gnu/lib.so.6:version 'GLIBC_2.17' NOT FOUND (required by /usr/lib/i386-linux-gnu/libstdc++.so.6) when I type sudo apt-get command same error shows up and apt-get command doesn't work. All I have is character user interface. please help me.

    Read the article

  • SIMD Extensions for the Database Storage Engine

    - by jchang
    For the last 15 years, Intel and AMD have been progressively adding special purpose extensions to their processor architectures. The extensions mostly pertain to vector operations with Single Instruction, Multiple Data (SIMD) concept. The reasoning was that achieving significant performance improvement over each successive generation for the general purpose elements had become extraordinarily difficult. On the other hand, SIMD performance could be significantly improved with special purpose registers...(read more)

    Read the article

  • Why does switching users completely hang my system every time?

    - by Stéphane
    I have a fresh install of 11.04 64bit, with 2 administrator accounts and 4 normal accounts. The 4 normal accounts (the kids' accounts) don't have passwords, they can login simply by clicking on their names. When any of the users -- either admin or normal -- tries to switch to another account by clicking in the top-right corner of the screen and selecting another user, the screen goes black and the entire system locks up. Even CTRL+ALT+F1 through F7 does nothing. This is reproducible 100% of the time on this system. I can ssh into the box when the console locks up, and by running top, I see that Xorg is consuming about 100% of the CPU. Looking at the output of "ps axfu" in bash while the system is in this "locked up" state, here is the lightdm and X process tree: USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 1153 0.0 0.1 183508 4292 ? Ssl Dec26 0:00 lightdm root 2187 0.4 4.6 265976 164168 tty7 Ss+ 00:43 0:21 \_ /usr/bin/X :0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch stephane 2612 0.0 0.3 266400 10736 ? Ssl 01:52 0:00 \_ /usr/bin/gnome-session --session=ubuntu stephane 2650 0.0 0.0 12264 276 ? Ss 01:52 0:00 | \_ /usr/bin/ssh-agent /usr/bin/dbus-launch --exit-with-session /usr/bin/gnome-session --session=ubuntu stephane 2703 0.8 3.0 562068 106548 ? Sl 01:52 0:08 | \_ compiz stephane 2801 0.0 0.0 4264 584 ? Ss 01:52 0:00 | | \_ /bin/sh -c /usr/bin/compiz-decorator stephane 2802 0.0 0.3 265744 13772 ? Sl 01:52 0:00 | | \_ /usr/bin/unity-window-decorator ...cut... root 3024 80.6 0.3 107928 13088 tty8 Rs+ 01:53 12:34 \_ /usr/bin/X :1 -auth /var/run/lightdm/root/:1 -nolisten tcp vt8 -novtswitch That last process, pid #3024 in this case, is what has the CPU pegged. In case it matters (I suspect it might) here is what I think may be the relevant information for my video card, taken from /var/log/Xorg.0.log: [ 3392.653] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/extensions/libglx.so [ 3392.653] (II) Module glx: vendor="FireGL - AMD Technologies Inc." [ 3392.653] compiled for 6.9.0, module version = 1.0.0 ... [ 3392.655] (II) LoadModule: "fglrx" [ 3392.655] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/drivers/fglrx_drv.so [ 3392.672] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc." [ 3392.672] compiled for 1.4.99.906, module version = 8.88.7 [ 3392.672] Module class: X.Org Video Driver ... [ 3392.759] (==) fglrx(0): ATI 2D Acceleration Architecture enabled [ 3392.759] (--) fglrx(0): Chipset: "AMD Radeon HD 6410D" (Chipset = 0x9644) Lastly: I did see this posting: Change user on 11.10 hangs system ...but I checked, and the libpam-smbpass package isn't installed on this system.

    Read the article

  • Motherboard and Processor sync error panic and killing init

    - by pradeep
    I have installed Ubuntu 12.04LTS for the first time and this has problems while working. the system hangs out and panic error showing the message that motherboard and processor not syncing and attempted to kill init. I have a Gigabyte GA-MA74GMT-S2(AM3) board AMD Phenom II X2 555 processor 4gb ddr3 ram with L6 cache I would like to know why is this problem happening. this is a separate installation and system is also having windows7 running as a separate installation. need help fixing this.

    Read the article

  • Ubuntu boots to orange screen after install

    - by musicalfish8
    I have a problem in which I boot my computer and everything works normally, I see a purple screen with various partitions to select such as my Windows 7 and Ubuntu partitions. When I select the Ubuntu one, my computer boots to an orangish screen and plays what sounds like a drum sound once. Then nothing happens and I have to reboot my computer because the computer is stuck at this orange screen. EDIT: My hardware is: Asus M5A97 motherboard AMD Phenom II 630 processor MSI r6670 MD1GD5 GPU TrendNet TEW-641PC Wireless Card

    Read the article

< Previous Page | 46 47 48 49 50 51 52 53 54 55 56 57  | Next Page >