Search Results

Search found 3935 results on 158 pages for 'garreth 00'.

Page 50/158 | < Previous Page | 46 47 48 49 50 51 52 53 54 55 56 57  | Next Page >

  • Struggling with how to compare hours with different time zones in Java?

    - by Riki
    Hi! I have 2 date object in the database that represent the company's working hours. I only need the hours but since I have to save date. it appears like this: Date companyWorkStartHour; Date companyWorkEndHour; start hours: 12-12-2001-13:00:00 finish hours: 12-12-2001-18:00:00 I have the timezone of the company and of the user. (my server may be in another timezone). TimeZone userTimeZone; TimeZone companyTimeZone; I need to check if the user's current time (considering his timezone) is within the company working hours (considering the company's time zone). How can I do it? I am struggling for over a week with Java calendar and with no success!

    Read the article

  • Oracle Query Optimization: Why is My Second Query Faster?

    - by Patrick Cuff
    I was having some performance issues with an Oracle query, so I downloaded a trial of the Quest SQL Optimizer for Oracle, which made some changes that dramatically improved the query's performance. I'm not exactly sure why the recommended query had such an improvement; can anyone provide an explanation? Before: SELECT t1.version_id, t1.id, t2.field1, t3.person_id, t2.id FROM table1 t1, table2 t2, table3 t3 WHERE t1.id = t2.id AND t1.version_id = t2.version_id AND t2.id = 123 AND t1.version_id = t3.version_id AND t1.VERSION_NAME <> 'AA' order by t1.id Plan Cost: 831 Elapsed Time: 00:00:21.40 Number of Records: 40,717 After: SELECT /*+ USE_NL_WITH_INDEX(t1) */ t1.version_id, t1.id, t2.field1, t3.person_id, t2.id FROM table2 t2, table3 t3, table1 t1 WHERE t1.id = t2.id + 0 AND t1.version_id = t2.version_id + 0 AND t2.id = 123 AND t1.version_id = t3.version_id + 0 AND t1.VERSION_NAME || '' <> 'AA' AND t3.version_id = t2.version_id + 0 order by t1.id Plan Cost: 686 Elapsed Time: 00:00:00.95 Number of Records: 40,717 Questions: Why does re-arranging the order of the tables in the FROM clause help? Why does adding + 0 to the WHERE clause comparisons help? Why does || '' <> 'AA' in the WHERE clause VERSION_NAME comparison help? Is this a more efficient way of handling possible nulls on this column?

    Read the article

  • How to repair "order by" after union of 2 selects from 1 tables

    - by 4e4el
    I have a dropDownList on my form, where i need to have union of values from 2 colums of table [ost]. Type of this columns is currency. I have russian version of access, default value of curency in "rur" and i need "uah". I need to change format and save "order by". I use this query: (SELECT distinct FORMAT([Sum1] ,'# ##0.00" uah.";-# ##0.00" uah."') FROM ost) Union (SELECT distinct FORMAT([Sum2],'# ##0.00" uah.";-# ##0.00" uah."') FROM ost) ORDER BY 1

    Read the article

  • c# string format issue

    - by Kamal
    Hi guys I need to convert a string to a monetary format of {###}.###.###,## that is a value of 5461497702600 would become 54.614.977.026,00 The numbers become excessively large. I am using return string.Format(string.Format("{0:#" + (val < 1000 ? "" : "\\.") + "##0.00}", val)); which returns for the example 54614977.026,00 (only one dot) Any help would be appreciated

    Read the article

  • MySQL datetime fields and daylight savings time -- how do I reference the "extra" hour?

    - by Aaron
    I'm using the America/New York timezone. In the Fall we "fall back" an hour -- effectively "gaining" one hour at 2am. At the transition point the following happens: it's 01:59:00 -04:00 then 1 minute later it becomes: 01:00:00 -05:00 So if you simply say "1:30am" it's ambiguous as to whether or not you're referring to the first time 1:30 rolls around or the second. I'm trying to save scheduling data to a MySQL database and can't determine how to save the times properly. Here's the problem: "2009-11-01 00:30:00" is stored internally as 2009-11-01 00:30:00 -04:00 "2009-11-01 01:30:00" is stored internally as 2009-11-01 01:30:00 -05:00 This is fine and fairly expected. But how do I save anything to 01:30:00 -04:00? The documentation does not show any support for specifying the offset and, accordingly, when I've tried specifying the offset it's been duly ignored. The only solutions I've thought of involve setting the server to a timezone that doesn't use daylight savings time and doing the necessary transformations in my scripts (I'm using PHP for this). But that doesn't seem like it should be necessary. Many thanks for any suggestions.

    Read the article

  • CodePlex Daily Summary for Wednesday, March 17, 2010

    CodePlex Daily Summary for Wednesday, March 17, 2010New Projectschaosreader: A simple RSS reader.CRM 4.0 Customization GUID Update: The CRM 4.0 customization GUID update is an open source C# console application that automatically replaces GUID values in your exported workflow cu...DotNetNuke® Skin Bright: A DotNetNuke Design Challenge skin package submitted to the "Modern Business" category by Noel Jerke of SiteToolset. This simple and clean business...DotNetNuke® Skin Go: A DotNetNuke Design Challenge skin package submitted to the "Modern Business" category by DnnGo Corporation. The skin uses web standard DIV+CSS tec...DotNetNuke® Skin J10blend: A DotNetNuke Design Challenge skin package submitted to the "Out of the box" category by Timthy Maler of 2M Studio Design. J10-Black v01.00.00 inc...DotNetNuke® Skin Recipe: A DotNetNuke Design Challenge skin package submitted to the "Standards" category by dnnprofis.at. For mobile devices the skin changes to a mobile...DotNetNuke® Skin SpaceSmurfs: A DotNetNuke Design Challenge skin package submitted to the "Personal" category by Eric Johnson of Personify Design. This fun personal skin was ins...ERDOS6 - Web: A Web Project about ERDOS 6Flickrlight: Flickrlight is a personal fun project out of love of Flickr and Silverlight. You can experience it here: http://www.flickrlight.net.GsGrid: Extracting data from Gaussian grid file and grid file calculationiLocator: iLocator is a collaborative educational mapping game for children developed on Microsoft Surface. This game encourages players to collaborate with ...Javascript CallObject SOAP AJAX Helper: CallObject is a Javascript based AJAX helper, it facilitates wrapping of basic soap calls (as long as simple data types are used), asynchronous ret...kbTrainer: kbTrainer is a simple to use HTML application for typing speed training. A lot of features completed in basic. 2 learning keywords layouts -- engli...Laboratório de Engenharia de Software - Projeto: Criado para estudar e aplicar novas tecnologias web.Maxilds Powershell Scripts: Repo of my powershell scriptsNamespacifier: Namespacifier is a C#.NET library and console application to fix XML documents containing multiple default namespaces. It gives prefixes to defaul...OData SDK for Objective-C: This is a CTP of the OData SDK for Objective-C. The library targets iPhone devices and Mac OS X and it is designed to facilitate the connection wit...Open Data App Framework (ODAF): The Open Data Application Framework (ODAF) is a framework that allows cities to easily map existing civic Open Data landmarks, and allow users to r...QuickieB2B: QuickieB2B is web application which main target is to provide quick info about products. It's designed for small companies who have a big number of...RayView: Rayview is an easy-to-use Raytracing-Framework based on Microsoft XNA.Robotics Studio application to navigate Lego Mindstorms robot through labyrinth: A project for Software Systems Analysis and Design Tools subject at the Kaunas University of Technology. The main point of the project is to code L...SharePoint Icon Integration: SharePoint Icon Integration makes it easier for SharePoint Administrators / Developers to add a icon (pdf) to the SharePoint farm. You will no long...TestVersion: Testing VersionieringTimecard: SoftSource Timecard project.T-shirt Cannon: So the Coding4Fun team had two weeks to build two robots able to drive, aim, and shoot t-shirts with a Windows Phone during a MIX10 Keynote demo of...USTF: This project is a bit secretive right now.Windows Azure Command-line Tools for PHP Developers: The “Windows Azure Command-line tools for PHP” provide a command-line experience to developers who wish to develop, package, and deploy PHP applic...New ReleasesCaramel Engine: CaramelEngine Alpha Build 0.0.0.1a: This is an early alpha release of the Engine and it's functionality. Be sure to have the using CaramelEngine statement. This release is for people...Coot: Preview: Basic preview On the first use you have to click Create New Session and Login. After this you can just click Screen Saver each time. Settings sho...CycleMania Starter Kit EAP - ASP.NET 4.0 Problem - Design - Solution: Cyclemania 0.08.32: The latest alpha release.DeepZoomContainer, Expanded DeepZoom for Silverlight & Windows Phone 7 Series: Release ver. 1.20 for Windows Phone 7 Series: SolutionMerge PathAnimation solution into one MouseWheel elimination PathAnimationWP7 Port DeepZoomContainerProject rebuilt for WP7 support De...Desktop Google Reader: 1.3 (the social release): NewsSharing Liking Mail item Labels / Tags Send to Twitter Read It Later http://readitlaterlist.com/ Instapaper http://www.instapaper.com/ Favicons...DotNetNuke® Blog: 04.00.00 RC 2: PLEASE NOTE: Please do not upgrade previous version of the Beta releases - please start from 03.05.01 This is a RELEASE CANDIDATE, and as such ...DotNetNuke® Community Edition: 05.03.00: New FeaturesTemplated User Profiles - User profile pages are now publicly viewable Photo field in User Profile - Users can upload a photo to thei...DotNetNuke® Skin Bright: Bright Package 1.0.0: A DotNetNuke Design Challenge skin package submitted to the "Modern Business" category by Noel Jerke of SiteToolset. This simple and clean business...DotNetNuke® Skin Go: Go Package 1.0.0: A DotNetNuke Design Challenge skin package submitted to the "Modern Business" category by DnnGo Corporation. The skin uses web standard DIV+CSS tec...DotNetNuke® Skin J10blend: J10 Blend Package 1.0.0: A DotNetNuke Design Challenge skin package submitted to the "Out of the box" category by Timthy Maler of 2M Studio Design. J10-Black v01.00.00 incl...DotNetNuke® Skin Recipe: Recipe Package 1.0.0: A DotNetNuke Design Challenge skin package submitted to the "Standards" category by dnnprofis.at. For mobile devices the skin changes to a mobile f...DotNetNuke® Skin SpaceSmurfs: Space Smurfs Package 1.0.0: A DotNetNuke Design Challenge skin package submitted to the "Personal" category by Eric Johnson of Personify Design. This fun personal skin was ins...Dynamo: Dynamo v0.1 Beta: The following is included: Dynamo dlls Antlr dlls Hello world Simple Plugin example Application Dependency injection Singleton Managment ...ExtremeML: ExtremeML v1.0 Beta 1: Timed to accompany the RTM release of the OpenXML SDK v2.0, this is the first Beta release of ExtremeML (it was previously classified as a preview ...Family Tree Analyzer: Version 1.1.1.1: Version 1.1.1.1 Lots of Gedcom parsing fixes it should crash a whole lot less often and tolerate more "interesting" or "quirky" Gedcom entries. Add...Family Tree Analyzer: Version 1.2.0.1: Version 1.2.0.1 Added option to treat residence facts as Census Facts IGI Search now permits default country selection ie: what to use if it doesn...Flickrlight: Flickrlight: Current release is for idea sharing. There are not many design patterns being used. Please bare with the mess. :-) In order to run the applicat...Gherkin editor: Alpha 0.1: Most of the code at this point is the same as the Avalon.Sample from code project, just changed the name, removed extra languages and added syntax ...GsGrid: gsgrid1.6.4: gsgrid1.6.4GsGrid: gsgrid1.6.4-src: gsgrid1.6.4-srcHTML Template Repeater Module: Version 01.00.02: GeneralThe HTML Template Repeater Module is a direct replacement for the Core DotNetNuke Text/HTML module. Use it where you need to repeat the form...Images Compiler: Release 0.1: Last alpha buildJavascript CallObject SOAP AJAX Helper: Beta Release, 0.2.1: Beta Release, 0.2.1 Contains only core objectskbTrainer: kbtrainer 1.25u: kbTrainer is a simple to use speed typing training HTML application. A lot of features. All ither info availiable on http://code.google.com/p/kbtr...MapWindow6: MapWindow 6.0 msi (March 16): This version fixes a bug where selected points were not drawing correctly.Mesopotamia Experiment: Mesopotamia 1.2.43: Release Notes New Features - Scenario Name on title bar - Show organisms in Scnearios with simple stats Bug Fixes - Removed app domain recyling an...MFCMAPI: March 2010 Release: If you just want to run the tool, get the executable. If you want to debug it, get the symbol file and the source. Build: 6.0.0.1018 The 64 bit bu...MVVM Light Toolkit: MVVM Light Toolkit V3: Download the Zip file and extract it to a local folder. Then, follow the instructions on the Installation page http://www.galasoft.ch/mvvm/installi...NETXPF: 1.0.2: Changes: - Added a class "IOUtils" with methods for reading streams and GZip-compressing HTTP responses - Fixed a bug in the size formatter (excep...OData SDK for Objective-C: OData SDK for Objective-C CTP: The current release supports read-only operations only and it has been tested on a limited set of scenarios. The download include a sample iPhone a...Open Data App Framework (ODAF): ODAF 1.0: Initial beta release.Selection Maker: Selection Maker 1.1: New FeaturesContext Menu for ListView added Bug FixesFixed: If the users press Copy/Cut Button when no item is selected in ListView the ListView cl...Selection Maker: Selection Maker 1.2: Bug Fixes:a minor bug fixedSimple.NET: Simple.Mocking 1.0.0.5: Initial version of a new mocking framework for .NET Revision 1: Expect.AnyInocationOn<T>(T target) changed to Expect.AnyInocationOn(object target...SQL Server Extended Properties Quick Editor: New release 1.5.4: Whats new: Move preferences to application settings and add a form to edit preferences. Support to add, modify and delete operations could be made ...SuperModel - A Dynamic View-Model Generator: 1.0.0.0 - Tyra: The final 1.0 release, now less intrusive! If you don't want to implement ISuperModel, simply implement INotifyPropertyChanged.Timecard: Timecard Initial Release: The zipped version of the Initial Checkin.Transparent Persistence.Net: TP.Net 0.1.0: This is the initial alpha release. It's working for small set of use-cases (basic access to Cassandra).VCC: Latest build, v2.1.30316.0: Automatic drop of latest buildVFPnfe: Projeto Ajuda PAF-ECF: Este projeto visa ajudar aos desenvolvedores para homologação do PAF-ECF , sob licença publica GNU/GPL para ver mais detalhes do mesmo assista o vi...Visual Studio DSite: Gif Animator: This program will make an animate gif. (Program written in Vb.Net 2008)Most Popular ProjectsMetaSharpLiveUpload to FacebookSkype Voice ChangerLiveUpload to YouTubeSIPSorceryChartPart for SharePointTFS Branching Guide 2.0TouchFlo DetacherNPandaySnippet EditorMost Active ProjectsLINQ to TwitterRawrOData SDK for PHPDirectQpatterns & practices – Enterprise LibraryBlogEngine.NETN2 CMSOpen Data App Framework (ODAF)NB_Store - Free DotNetNuke Ecommerce Catalog ModuleMapWindow6

    Read the article

  • Trying to use HUAWEI E173 on Ubuntu 12.04

    - by Scott Warren
    I have a HUAWEI E173 usb stick to access the internet. It works normally on windows but I need to use it on my Ubuntu system. I plug it in, and after 25-20 seconds the status light turns green and blinks twice every 3 seconds. I see no changes in my system whatsoever, nothing gets installed, I don't get prompted for my PIN. I tried to create a connection using edit connections. I entered the following parameters: Turkey, Turkcell, My Plan is not listed, Internet. Nothing happens. I tried the lsusb command and got the following: tosh2000@tosh:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 058f:a001 Alcor Micro Corp. Bus 001 Device 004: ID 12d1:14ba Huawei Technologies Co., Ltd. I tried the usb-devices command and can see the device: T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=12d1 ProdID=14ba Rev=00.00 S: Manufacturer=HUAWEI Technology S: Product=HUAWEI Mobile C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage I: If#= 1 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage Based on other advice I found, I tried the following command: sudo modprobe usbserial vendor=0x12d1 product=0x14ba Again, nothing happened. My question is why does the "enable mobile broadband" not populate automatically in the dropdown networking menu and how can I can I start using the device? Thank you.

    Read the article

  • 11gR2???---gipc????

    - by Allen Gao
    Normal 0 7.8 ? 0 2 false false false EN-US ZH-CN X-NONE DefSemiHidden="true" DefQFormat="false" DefPriority="99" LatentStyleCount="267" UnhideWhenUsed="false" QFormat="true" Name="Normal"/ UnhideWhenUsed="false" QFormat="true" Name="heading 1"/ UnhideWhenUsed="false" QFormat="true" Name="Title"/ UnhideWhenUsed="false" QFormat="true" Name="Subtitle"/ UnhideWhenUsed="false" QFormat="true" Name="Strong"/ UnhideWhenUsed="false" QFormat="true" Name="Emphasis"/ UnhideWhenUsed="false" Name="Table Grid"/ UnhideWhenUsed="false" QFormat="true" Name="No Spacing"/ UnhideWhenUsed="false" Name="Light Shading"/ UnhideWhenUsed="false" Name="Light List"/ UnhideWhenUsed="false" Name="Light Grid"/ UnhideWhenUsed="false" Name="Medium Shading 1"/ UnhideWhenUsed="false" Name="Medium Shading 2"/ UnhideWhenUsed="false" Name="Medium List 1"/ UnhideWhenUsed="false" Name="Medium List 2"/ UnhideWhenUsed="false" Name="Medium Grid 1"/ UnhideWhenUsed="false" Name="Medium Grid 2"/ UnhideWhenUsed="false" Name="Medium Grid 3"/ UnhideWhenUsed="false" Name="Dark List"/ UnhideWhenUsed="false" Name="Colorful Shading"/ UnhideWhenUsed="false" Name="Colorful List"/ UnhideWhenUsed="false" Name="Colorful Grid"/ UnhideWhenUsed="false" Name="Light Shading Accent 1"/ UnhideWhenUsed="false" Name="Light List Accent 1"/ UnhideWhenUsed="false" Name="Light Grid Accent 1"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 1"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 1"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 1"/ UnhideWhenUsed="false" QFormat="true" Name="List Paragraph"/ UnhideWhenUsed="false" QFormat="true" Name="Quote"/ UnhideWhenUsed="false" QFormat="true" Name="Intense Quote"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 1"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 1"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 1"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 1"/ UnhideWhenUsed="false" Name="Dark List Accent 1"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 1"/ UnhideWhenUsed="false" Name="Colorful List Accent 1"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 1"/ UnhideWhenUsed="false" Name="Light Shading Accent 2"/ UnhideWhenUsed="false" Name="Light List Accent 2"/ UnhideWhenUsed="false" Name="Light Grid Accent 2"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 2"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 2"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 2"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 2"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 2"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 2"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 2"/ UnhideWhenUsed="false" Name="Dark List Accent 2"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 2"/ UnhideWhenUsed="false" Name="Colorful List Accent 2"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 2"/ UnhideWhenUsed="false" Name="Light Shading Accent 3"/ UnhideWhenUsed="false" Name="Light List Accent 3"/ UnhideWhenUsed="false" Name="Light Grid Accent 3"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 3"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 3"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 3"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 3"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 3"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 3"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 3"/ UnhideWhenUsed="false" Name="Dark List Accent 3"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 3"/ UnhideWhenUsed="false" Name="Colorful List Accent 3"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 3"/ UnhideWhenUsed="false" Name="Light Shading Accent 4"/ UnhideWhenUsed="false" Name="Light List Accent 4"/ UnhideWhenUsed="false" Name="Light Grid Accent 4"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 4"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 4"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 4"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 4"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 4"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 4"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 4"/ UnhideWhenUsed="false" Name="Dark List Accent 4"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 4"/ UnhideWhenUsed="false" Name="Colorful List Accent 4"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 4"/ UnhideWhenUsed="false" Name="Light Shading Accent 5"/ UnhideWhenUsed="false" Name="Light List Accent 5"/ UnhideWhenUsed="false" Name="Light Grid Accent 5"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 5"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 5"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 5"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 5"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 5"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 5"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 5"/ UnhideWhenUsed="false" Name="Dark List Accent 5"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 5"/ UnhideWhenUsed="false" Name="Colorful List Accent 5"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 5"/ UnhideWhenUsed="false" Name="Light Shading Accent 6"/ UnhideWhenUsed="false" Name="Light List Accent 6"/ UnhideWhenUsed="false" Name="Light Grid Accent 6"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 6"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 6"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 6"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 6"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 6"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 6"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 6"/ UnhideWhenUsed="false" Name="Dark List Accent 6"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 6"/ UnhideWhenUsed="false" Name="Colorful List Accent 6"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 6"/ UnhideWhenUsed="false" QFormat="true" Name="Subtle Emphasis"/ UnhideWhenUsed="false" QFormat="true" Name="Intense Emphasis"/ UnhideWhenUsed="false" QFormat="true" Name="Subtle Reference"/ UnhideWhenUsed="false" QFormat="true" Name="Intense Reference"/ UnhideWhenUsed="false" QFormat="true" Name="Book Title"/ classid="clsid:38481807-CA0E-42D2-BF39-B33AF135CC4D" id=ieooui st1\:*{behavior:url(#ieooui) } /* Style Definitions */ table.MsoNormalTable {mso-style-name:????; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";} ??????,????11gR2 ??????gipcd(????ora.gipcd)????,????gipc???,????????????? ????,??oracle????,??????????,??????????,???????????cache fusion ?????????????,?????????????oracle????????????,??????,???????(?????????Note 220970.1:RAC: Frequently Asked Questions,?????????)???????,???????????/????,?????????????? ??,?10gR2 ?11gR1????,?????????????,??:Linux bonding, AIX EtherChannel, HP-UX APA ???????????????????????????????(??,????????????????,???????)???????10g ?11.1 ??????,??????????????????(???????),????????????????subnet??????,????,?????oracle???????????,??????????????,???????????,??????????????,??????????????????????,??:????,?????? ?????????,?11gR2??(????,?11.2.0.2??),oracle??????????????,?????gipc(Grid IPC)???,??????????gipcd.bin?????????,??????? 1. ??????,????????????,?????????,?????????gpnp profile??????????????????? 2. ???????????,??????????,???????????????? 3. ?????????????,?????????/???????????,????????,???????? ??,oracle????????????????????????/??????,??,?????????? ??,???????????????,?????gipc ?HAIP????????????,??????????????,???????????????????:?????????,??:ocssd.bin????,crsd.bin??????;???:oracle RAC ??,??:ASM ??????,?????????????,?????????????????????gipc,???????????,?????????????????????,????????????????,?????,????????????,??,?????????????????gipc???,oracle ??????????????,??????????????,????????????????,HAIP ????,????oracle RAC??????/?????????,????????????????,????,????????HAIP?????,????????????ASM??,?????(???NM??)??????????,?????????????????HAIP,????????,????,???????? “Redundant Interconnect with Highly Available IP (HAIP) ??”? ???,???????????????????????? 1.??????gipcd.log 2013-07-17 12:28:28.071: [ default][3041003216]gipcd START pid=22337 Oracle Grid IPC Daemon 2013-07-17 12:28:28.072: [ GIPCD][3041003216] gipcdMain: gipcd Started <<<<<< gipcd????????? …… 2013-07-17 12:28:29.046: [ GPNP][3041003216]clsgpnp_getCachedProfileEx: [at clsgpnp.c:613] Result: (26) CLSGPNP_NO_PROFILE. Can't get offline GPnP service profile: local gpnpd is up and running. Use getProfile instead. 2013-07-17 12:28:29.046: [ GPNP][3041003216]clsgpnp_getCachedProfileEx: [at clsgpnp.c:623] Result: (26) CLSGPNP_NO_PROFILE. Failed to get offline GPnP service profile. 2013-07-17 12:28:29.066: [ GPNP][3041003216]clsgpnpm_newWiredMsg: [at clsgpnpm.c:741] Msg-reply has soap fault 10 (Operation returned Retry (error CLSGPNP_CALL_AGAIN)) [uri "http://www.grid-pnp.org/2005/12/gpnp-errors#"] <<<< gipcd ????gpnp profile?????????log??GI??????,?????????,?????gpnpd???????? …… 2013-07-17 12:28:39.342: [ CLSINET][3023027088] # 0 Interface 'eth1',ip='192.168.254.30',mac='00-0c-29-a8-14-65',mask='255.255.255.0',net='192.168.254.0',use='cluster_interconnect' 2013-07-17 12:28:39.342: [ CLSINET][3023027088] # 1 Interface 'eth2',ip='192.168.254.31',mac='00-0c-29-a8-14-6f',mask='255.255.255.0',net='192.168.254.0',use='cluster_interconnect' <<<<< gipcd ????????????????,???????2??????????? …… 2013-07-17 12:28:39.344: [GIPCHTHR][3025128336] gipchaWorkerUpdateInterface: created local bootstrap interface for node 'single1', haName 'gipcd_ha_name', inf 'mcast://230.0.1.0:42424/192.168.254.30' 2013-07-17 12:28:39.344: [GIPCHTHR][3025128336] gipchaWorkerUpdateInterface: created local interface for node 'single1', haName 'gipcd_ha_name', inf '192.168.254.30:46782' 2013-07-17 12:28:39.345: [GIPCHTHR][3025128336] gipchaWorkerUpdateInterface: created local bootstrap interface for node 'single1', haName 'gipcd_ha_name', inf 'mcast://230.0.1.0:42424/192.168.254.31' 2013-07-17 12:28:39.345: [GIPCHTHR][3025128336] gipchaWorkerUpdateInterface: created local interface for node 'single1', haName 'gipcd_ha_name', inf '192.168.254.31:39332' <<<<<<< gipcd ????????(????????????????)?endpoint ????? …… 2013-07-17 12:28:56.767: [GIPCHGEN][3023027088] gipchaNodeCreate: adding new node 0x9c107d8 { host 'single2', haName 'gipcd_ha_name', srcLuid 465fb26d-8b46eb95, dstLuid 00000000-00000000 numInf 0, contigSeq 0, lastAck 0, lastValidAck 0, sendSeq [0 : 0], createTime 797327224, flags 0x0 } <<<<< ???????? …… 2013-07-17 12:28:58.415: [GIPCHTHR][3025128336] gipchaWorkerUpdateInterface: created remote interface for node 'single2', haName 'gipcd_ha_name', inf 'udp://192.168.254.33:16663' 2013-07-17 12:28:58.415: [GIPCHGEN][3025128336] gipchaWorkerAttachInterface: Interface attached inf 0x9c0bb60 { host 'single2', haName 'gipcd_ha_name', local 0xb4c4e590, ip '192.168.254.33:16663', subnet '192.168.254.0', mask '255.255.255.0', numRef 0, numFail 0, flags 0x6 } 2013-07-17 12:28:58.415: [GIPCHTHR][3025128336] gipchaWorkerUpdateInterface: created remote interface for node 'single2', haName 'gipcd_ha_name', inf 'udp://192.168.254.32:17578' 2013-07-17 12:28:58.415: [GIPCHGEN][3025128336] gipchaWorkerAttachInterface: Interface attached inf 0x9c0a900 { host 'single2', haName 'gipcd_ha_name', local 0xb4cb8eb8, ip '192.168.254.32:17578', subnet '192.168.254.0', mask '255.255.255.0', numRef 0, numFail 0, flags 0x6 } <<<<<< gipcd ??????????????? …… 2013-07-17 12:29:36.120: [GIPCDMON][3027229584] gipcdMonitorSaveInfMetrics: inf[ 0] eth1 - rank 99, avgms 6.326531 [ 257 / 250 / 245 ] 2013-07-17 12:29:36.120: [GIPCDMON][3027229584] gipcdMonitorSaveInfMetrics: inf[ 1] eth2 - rank 99, avgms 5.182186 [ 259 / 250 / 247 ] <<<<<gipcd ??????????? ……  2. ?????????down???gipcd.log? 2013-07-17 13:23:20.346: [ CLSINET][3027229584] Returning NETDATA: 2 interfaces 2013-07-17 13:23:20.346: [ CLSINET][3027229584] # 0 Interface 'eth1',ip='192.168.254.30',mac='00-0c-29-a8-14-65',mask='255.255.255.0',net='192.168.254.0',use='cluster_interconnect' 2013-07-17 13:23:20.346: [ CLSINET][3027229584] # 1 Interface 'eth2',ip='192.168.254.31',mac='00-0c-29-a8-14-6f',mask='255.255.255.0',net='192.168.254.0',use='cluster_interconnect' 2013-07-17 13:23:20.359: [GIPCDMON][3027229584] gipcdMonitorSaveInfMetrics: inf[ 0] eth1 - rank 99, avgms 1.560694 [ 171 / 173 / 173 ] 2013-07-17 13:23:20.359: [GIPCDMON][3027229584] gipcdMonitorSaveInfMetrics: inf[ 1] eth2 - rank 99, avgms 1.802326 [ 172 / 172 / 172 ] <<<<<<<< gipcd ?????????? …… +++????“ifconfig eth1 down”????????????? …… 2013-07-17 13:23:44.397: [ CLSINET][3027229584] # 0 Interface 'eth2',ip='192.168.254.31',mac='00-0c-29-a8-14-6f',mask='255.255.255.0',net='192.168.254.0',use='cluster_interconnect' 2013-07-17 13:23:44.397: [GIPCDMON][3027229584] gipcdMonitorUpdate: interface went down - [ ip 192.168.254.30, subnet 192.168.254.0, mask 255.255.255.0 ] 2013-07-17 13:23:44.397: [GIPCDMON][3027229584] gipcdMonitorUpdate: msg sent to client thread (([update(ip: 192.168.254.30, mask: 255.255.255.0, subnet 192.168.254.0), state(gipcdadapterstateDown)])) <<<<<<<< gipcd ????eth1 down?,???????(??:ocssd.bin)????? …… 2013-07-17 13:23:44.426: [GIPCHGEN][3025128336] gipchaInterfaceDisable: disabling interface 0xb4c4e590 { host '', haName 'gipcd_ha_name', local (nil), ip '192.168.254.30', subnet '192.168.254.0', mask '255.255.255.0', numRef 0, numFail 1, flags 0x1cd } 2013-07-17 13:23:44.428: [GIPCHGEN][3025128336] gipchaInterfaceDisable: disabling interface 0x9c0bb60 { host 'single2', haName 'gipcd_ha_name', local 0xb4c4e590, ip '192.168.254.33:16663', subnet '192.168.254.0', mask '255.255.255.0', numRef 0, numFail 0, flags 0x86 } 2013-07-17 13:23:44.428: [GIPCHALO][3025128336] gipchaLowerCleanInterfaces: performing cleanup of disabled interface 0x9c0bb60 { host 'single2', haName 'gipcd_ha_name', local 0xb4c4e590, ip '192.168.254.33:16663', subnet '192.168.254.0', mask '255.255.255.0', numRef 0, numFail 0, flags 0xa6 } <<<<<<<<gipcd ????????eth1 ???,????????????????????? …… 2013-07-17 13:24:08.747: [GIPCDMON][3027229584] gipcdMonitorSaveInfMetrics: inf[ 0] eth2 - rank 99, avgms 1.955307 [ 204 / 181 / 179 ] <<<<<<<gipcd ???????????? ??:??????,??????????????????,????????????????,???????????eth1??HAIP,?failover?eth2 ?,????,????ASM??????? 3. ???eht1???? ++ ????”ifconfig eth1 up”????eth1 2013-07-17 13:36:31.260: [GIPCDMON][3027229584] gipcdMonitorUpdate: New Interface found - [ ip 192.168.254.30, subnet 192.168.254.0, mask 255.255.255.0 ] 2013-07-17 13:36:31.260: [GIPCDMON][3027229584] gipcdMonitorUpdate: msg sent to client thread (([update(ip: 192.168.254.30, mask: 255.255.255.0, subnet 192.168.254.0), state(gipcdadapterstateUp)])) <<<<< gpicd ?????????? …… 2013-07-17 13:36:31.471: [GIPCHTHR][3025128336] gipchaWorkerUpdateInterface: created local bootstrap interface for node 'single1', haName 'gipcd_ha_name', inf 'mcast://230.0.1.0:42424/192.168.254.30' 2013-07-17 13:36:31.471: [GIPCHTHR][3025128336] gipchaWorkerUpdateInterface: created local interface for node 'single1', haName 'gipcd_ha_name', inf '192.168.254.30:55548' <<<<<< ?????endpoint???? …… 2013-07-17 13:37:11.493: [ CLSINET][3027229584] Returning NETDATA: 2 interfaces 2013-07-17 13:37:11.493: [ CLSINET][3027229584] # 0 Interface 'eth1',ip='192.168.254.30',mac='00-0c-29-a8-14-65',mask='255.255.255.0',net='192.168.254.0',use='cluster_interconnect' 2013-07-17 13:37:11.493: [ CLSINET][3027229584] # 1 Interface 'eth2',ip='192.168.254.31',mac='00-0c-29-a8-14-6f',mask='255.255.255.0',net='192.168.254.0',use='cluster_interconnect' 2013-07-17 13:37:11.510: [GIPCDMON][3027229584] gipcdMonitorSaveInfMetrics: inf[ 0] eth2 - rank 99, avgms 6.141304 [ 307 / 184 / 184 ] <<<<<<<< <<<<<<<< gipcd??????? ??:??????,??????????????????,????????????????,????????failover?eth2??HAIP,?????eth1 ?,????,????ASM??????? ??,????????,gipcd ???????????,??,????????,?????????(????)????,gipcd???????????,??????HAIP???,???????????????(??:Linux bonding,etherchannel?),???????????,????????? ??????????????11gR2 ??????gipcd????,????????????,?????????? ??????????,???????????,??“??:11gR2???---gipc????"?

    Read the article

  • One email user keeps disconnecting from our exchange server

    - by Funky Si
    I have one user who keeps reporting that Outlook keeps disconnecting from our email server. All other users are fine. Our email server is running Exchange 2010 and the client is running Outlook 2003. The disconnection only lasts a moment. I have checked for logs on the client and Exchange server and can not see any reason for the disconnect, On the Client I get EventId 26 telling me Outlook has disconnected and reconnected but no reason why. Can anyone give me some suggestions of things to try and track down where the problem could be? --Update-- I have found the following log file C:\Program Files\Microsoft\Exchange Server\V14\Logging\RPC Client Access which suggests that it is a problem with RPC sessions. Excerpt is below 2013-01-31T15:21:24.015Z,6413,15,/o=EUROSAFEUK/ou=first administrative group/cn=Recipients/cn=andy,,OUTLOOK.EXE,11.0.8303.0,Classic,,,ncacn_ip_tcp,,,0,00:00:00,"BS=Conn:24,HangingConn:0,AD:$null/$null/0%,CAS:$null/$null/2%,AB:$null/$null/0%,RPC:$null/$null/1%,FC:$null/0,Policy:ClientThrottlingPolicy2,Norm[Resources:(Mdb)Mailbox Database 0765959540(Health:-1%,HistLoad:0),(Mdb)Public Folder Database 1945427388(Health:-1%,HistLoad:0),];GC:6/1/0;", 2013-01-31T15:21:24.015Z,6413,16,/o=EUROSAFEUK/ou=first administrative group/cn=Recipients/cn=andy,,OUTLOOK.EXE,11.0.8303.0,Classic,,,ncacn_ip_tcp,,PublicLogoff,0,00:00:00,LogonId: 1, 2013-01-31T15:21:24.015Z,6413,16,/o=EUROSAFEUK/ou=first administrative group/cn=Recipients/cn=andy,,OUTLOOK.EXE,11.0.8303.0,Classic,,,ncacn_ip_tcp,,,,00:00:00,"BS=Conn:24,HangingConn:0,AD:$null/$null/0%,CAS:$null/$null/2%,AB:$null/$null/0%,RPC:$null/$null/1%,FC:$null/0,Policy:ClientThrottlingPolicy2,Norm[Resources:(Mdb)Mailbox Database 0765959540(Health:-1%,HistLoad:0),(Mdb)Public Folder Database 1945427388(Health:-1%,HistLoad:0),];GC:6/1/0;", 2013-01-31T15:21:24.015Z,6417,5,/o=EUROSAFEUK/ou=first administrative group/cn=Recipients/cn=andy,,OUTLOOK.EXE,11.0.8303.0,Classic,,,ncacn_ip_tcp,,OwnerLogoff,0,00:00:00,LogonId: 0, 2013-01-31T15:21:24.015Z,6417,5,/o=EUROSAFEUK/ou=first administrative group/cn=Recipients/cn=andy,,OUTLOOK.EXE,11.0.8303.0,Classic,,,ncacn_ip_tcp,,,0x6BA (rpc::Exception),00:02:54.7668000,Budget Highs [AD = 0][CAS = 3][RPC = 1] Session Throttled Count = 0; SessionDropped,"RpcEndPoint: [ServerUnavailableException] Connection must be re-established - [SessionDeadException] Connection doesn't have any open logons, but has client activity. This may be masking synchronization stalls. Dropping a connection." 2013-01-31T15:21:24.015Z,6420,7,/o=EUROSAFEUK/ou=first administrative group/cn=Recipients/cn=andy,,OUTLOOK.EXE,11.0.8303.0,Classic,,,ncacn_ip_tcp,,DelegateLogoff,0,00:00:00,LogonId: 0, 2013-01-31T15:21:24.031Z,6420,7,/o=EUROSAFEUK/ou=first administrative group/cn=Recipients/cn=andy,,OUTLOOK.EXE,11.0.8303.0,Classic,,,ncacn_ip_tcp,,,,00:00:00.0156000,Budget Highs [AD = 0][CAS = 3][RPC = 1] Session Throttled Count = 0, 2013-01-31T15:21:24.031Z,6420,7,/o=EUROSAFEUK/ou=first administrative group/cn=Recipients/cn=andy,,OUTLOOK.EXE,11.0.8303.0,Classic,,,ncacn_ip_tcp,,Disconnect,0,00:02:54.2364000,, 2013-01-31T15:21:24.031Z,6419,5,/o=EUROSAFEUK/ou=first administrative group/cn=Recipients/cn=andy,,OUTLOOK.EXE,11.0.8303.0,Classic,,,ncacn_ip_tcp,,OwnerLogoff,0,00:00:00,LogonId: 0, 2013-01-31T15:21:24.031Z,6419,5,/o=EUROSAFEUK/ou=first administrative group/cn=Recipients/cn=andy,,OUTLOOK.EXE,11.0.8303.0,Classic,,,ncacn_ip_tcp,,,,00:00:00,Budget Highs [AD = 0][CAS = 3][RPC = 1] Session Throttled Count = 0, 2013-01-31T15:21:24.031Z,6419,5,/o=EUROSAFEUK/ou=first administrative group/cn=Recipients/cn=andy,,OUTLOOK.EXE,11.0.8303.0,Classic,,,ncacn_ip_tcp,,Disconnect,0,00:02:54.4392000,, 2013-01-31T15:21:24.031Z,6416,7,/o=EUROSAFEUK/ou=first administrative group/cn=Recipients/cn=andy,,OUTLOOK.EXE,11.0.8303.0,Classic,,,ncacn_ip_tcp,,DelegateLogoff,0,00:00:00,LogonId: 0, 2013-01-31T15:21:24.031Z,6416,7,/o=EUROSAFEUK/ou=first administrative group/cn=Recipients/cn=andy,,OUTLOOK.EXE,11.0.8303.0,Classic,,,ncacn_ip_tcp,,,,00:00:00,Budget Highs [AD = 0][CAS = 3][RPC = 1] Session Throttled Count = 0, Can anyone help point me in the right direction for a solution?

    Read the article

  • NIC Bonding/balance-rr with Dell PowerConnect 5324

    - by Branden Martin
    I'm trying to get NIC bonding to work with balance-rr so that three NIC ports are combined, so that instead of getting 1 Gbps we get 3 Gbps. We are doing this on two servers connected to the same switch. However, we're only getting the speed of one physical link. We are using 1 Dell PowerConnect 5324, SW version 2.0.1.3, Boot version 1.0.2.02, HW version 00.00.02. Both servers are CentOS 5.9 (Final) running OnApp Hypervisor (CloudBoot) Server 1 is using ports g5-g7 in port-channel 1. Server 2 is using ports g9-g11 in port-channel 2. Switch show interface status Port Type Duplex Speed Neg ctrl State Pressure Mode -------- ------------ ------ ----- -------- ---- ----------- -------- ------- g1 1G-Copper -- -- -- -- Down -- -- g2 1G-Copper Full 1000 Enabled Off Up Disabled Off g3 1G-Copper -- -- -- -- Down -- -- g4 1G-Copper -- -- -- -- Down -- -- g5 1G-Copper Full 1000 Enabled Off Up Disabled Off g6 1G-Copper Full 1000 Enabled Off Up Disabled Off g7 1G-Copper Full 1000 Enabled Off Up Disabled On g8 1G-Copper Full 1000 Enabled Off Up Disabled Off g9 1G-Copper Full 1000 Enabled Off Up Disabled On g10 1G-Copper Full 1000 Enabled Off Up Disabled On g11 1G-Copper Full 1000 Enabled Off Up Disabled Off g12 1G-Copper Full 1000 Enabled Off Up Disabled On g13 1G-Copper -- -- -- -- Down -- -- g14 1G-Copper -- -- -- -- Down -- -- g15 1G-Copper -- -- -- -- Down -- -- g16 1G-Copper -- -- -- -- Down -- -- g17 1G-Copper -- -- -- -- Down -- -- g18 1G-Copper -- -- -- -- Down -- -- g19 1G-Copper -- -- -- -- Down -- -- g20 1G-Copper -- -- -- -- Down -- -- g21 1G-Combo-C -- -- -- -- Down -- -- g22 1G-Combo-C -- -- -- -- Down -- -- g23 1G-Combo-C -- -- -- -- Down -- -- g24 1G-Combo-C Full 100 Enabled Off Up Disabled On Flow Link Ch Type Duplex Speed Neg control State -------- ------- ------ ----- -------- ------- ----------- ch1 1G Full 1000 Enabled Off Up ch2 1G Full 1000 Enabled Off Up ch3 -- -- -- -- -- Not Present ch4 -- -- -- -- -- Not Present ch5 -- -- -- -- -- Not Present ch6 -- -- -- -- -- Not Present ch7 -- -- -- -- -- Not Present ch8 -- -- -- -- -- Not Present Server 1: cat /etc/sysconfig/network-scripts/ifcfg-eth3 DEVICE=eth3 HWADDR=00:1b:21:ac:d5:55 USERCTL=no BOOTPROTO=none ONBOOT=yes MASTER=onappstorebond SLAVE=yes cat /etc/sysconfig/network-scripts/ifcfg-eth4 DEVICE=eth4 HWADDR=68:05:ca:18:28:ae USERCTL=no BOOTPROTO=none ONBOOT=yes MASTER=onappstorebond SLAVE=yes cat /etc/sysconfig/network-scripts/ifcfg-eth5 DEVICE=eth5 HWADDR=68:05:ca:18:28:af USERCTL=no BOOTPROTO=none ONBOOT=yes MASTER=onappstorebond SLAVE=yes cat /etc/sysconfig/network-scripts/ifcfg-onappstorebond DEVICE=onappstorebond IPADDR=10.200.52.1 NETMASK=255.255.0.0 GATEWAY=10.200.2.254 NETWORK=10.200.0.0 USERCTL=no BOOTPROTO=none ONBOOT=yes cat /proc/net/bonding/onappstorebond Ethernet Channel Bonding Driver: v3.4.0-1 (October 7, 2008) Bonding Mode: load balancing (round-robin) MII Status: up MII Polling Interval (ms): 100 Up Delay (ms): 0 Down Delay (ms): 0 Slave Interface: eth3 MII Status: up Speed: 1000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: 00:1b:21:ac:d5:55 Slave Interface: eth4 MII Status: up Speed: 1000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: 68:05:ca:18:28:ae Slave Interface: eth5 MII Status: up Speed: 1000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: 68:05:ca:18:28:af Server 2: cat /etc/sysconfig/network-scripts/ifcfg-eth3 DEVICE=eth3 HWADDR=00:1b:21:ac:d5:a7 USERCTL=no BOOTPROTO=none ONBOOT=yes MASTER=onappstorebond SLAVE=yes cat /etc/sysconfig/network-scripts/ifcfg-eth4 DEVICE=eth4 HWADDR=68:05:ca:18:30:30 USERCTL=no BOOTPROTO=none ONBOOT=yes MASTER=onappstorebond SLAVE=yes cat /etc/sysconfig/network-scripts/ifcfg-eth5 DEVICE=eth5 HWADDR=68:05:ca:18:30:31 USERCTL=no BOOTPROTO=none ONBOOT=yes MASTER=onappstorebond SLAVE=yes cat /etc/sysconfig/network-scripts/ifcfg-onappstorebond DEVICE=onappstorebond IPADDR=10.200.53.1 NETMASK=255.255.0.0 GATEWAY=10.200.3.254 NETWORK=10.200.0.0 USERCTL=no BOOTPROTO=none ONBOOT=yes cat /proc/net/bonding/onappstorebond Ethernet Channel Bonding Driver: v3.4.0-1 (October 7, 2008) Bonding Mode: load balancing (round-robin) MII Status: up MII Polling Interval (ms): 100 Up Delay (ms): 0 Down Delay (ms): 0 Slave Interface: eth3 MII Status: up Speed: 1000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: 00:1b:21:ac:d5:a7 Slave Interface: eth4 MII Status: up Speed: 1000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: 68:05:ca:18:30:30 Slave Interface: eth5 MII Status: up Speed: 1000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: 68:05:ca:18:30:31 Here are the results of iperf. ------------------------------------------------------------ Client connecting to 10.200.52.1, TCP port 5001 TCP window size: 27.7 KByte (default) ------------------------------------------------------------ [ 3] local 10.200.3.254 port 53766 connected with 10.200.52.1 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 950 MBytes 794 Mbits/sec

    Read the article

  • Why wireless adatper stop to work?

    - by AndreaNobili
    today I correctly installed the driver for the TP-LINK TL-WN725N USB wireless adapter on my RaspBerry Pi (I use RaspBian that is a Debian), then I setted up the wifi using the wpa-supplicant as explained in this tutorial: http://www.maketecheasier.com/setup-wifi-on-raspberry-pi/ This worked fine untill this evening. Then suddenly it stopped to work when I try to connect in SSH and the Raspberry is on the wireless (or rather it should be, as this is not in the list of my router's DHCP connected Client) The strange thing is that the USB wirless adapter blink so I think that this is not a driver problem. If I try to connect it by the ethernet I have no problem. It appear in my router's DHCP connected Client and I can connect to it by SSH. When I connect to it using ethernet if I perform an ifconfig command I obtain: pi@raspberrypi ~ $ ifconfig eth0 Link encap:Ethernet HWaddr b8:27:eb:2a:9f:b0 inet addr:192.168.1.9 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:48 errors:0 dropped:0 overruns:0 frame:0 TX packets:59 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:6006 (5.8 KiB) TX bytes:8268 (8.0 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:8 errors:0 dropped:0 overruns:0 frame:0 TX packets:8 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1104 (1.0 KiB) TX bytes:1104 (1.0 KiB) wlan0 Link encap:Ethernet HWaddr e8:94:f6:19:80:4c UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) So it seems that the wlan0 USB wireless adapter driver is correctly loaded. If I remove the USB wireless adapter and put it again into the USB port, the lasts lines of dmesg log is: [ 20.303172] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 20.306340] RTL871X: set bssid:00:00:00:00:00:00 [ 20.306726] RTL871X: set ssid [g\xffffffc6isQ\xffffffffJ\xffffffec)\xffffffcd\xffffffba\xffffffba\xffffffab\xfffffff2\xfffffffb\xffffffe3F|\xffffffc2T\xfffffff8\x1b\xffffffe8\xffffffe7\xffffff8dvZ.c3\xffffff9f\xffffffc9\xffffff9a\xffffff9aD\xffffffa7\x1a\xffffffa0\x1a\xffffff8b] fw_state=0x00000008 [ 21.614585] RTL871X: indicate disassoc [ 21.908495] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 25.006282] Adding 102396k swap on /var/swap. Priority:-1 extents:1 across:102396k SSFS [ 26.247997] RTL871X: nolinked power save enter As you can see some of these line are related to the RTL871X that is my USB wireless adapter, but I don't know is that these line report an error or if it is all ok. Looking at the adapter status I obtain: pi@raspberrypi ~ $ ip link list dev wlan0 3: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DORMANT qlen 1000 link/ether e8:94:f6:19:80:4c brd ff:ff:ff:ff:ff:ff As you can see the mode is DORMANT but I think that this is normal because now I am connected using ethernet. I tryied to set up the adapter but it seems that I obtain no result, infact: pi@raspberrypi ~ $ sudo ip link set dev wlan0 up pi@raspberrypi ~ $ ip link list dev wlan0 3: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DORMANT qlen 1000 link/ether e8:94:f6:19:80:4c brd ff:ff:ff:ff:ff:ff pi@raspberrypi ~ $ sudo ip link set dev wlan0 up This is my /etc/network/interfaces file content and it is ok: auto lo iface lo inet loopback iface eth0 inet dhcp allow-hotplug wlan0 iface wlan0 inet manual wpa-roam /etc/wpa_supplicant/wpa_supplicant.conf iface default inet dhcp and it is the /etc/wpa_supplicant/wpa_supplicant.conf that I think is ok (I did not change it compared to when it worked): ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev update_config=1 network={ ssid="MY-NETWORK" psk="mypassword" key_mgmt=WPA-PSK } and infact if I execute a network scan I correctly find MY-NETWORK in the network list,infact: pi@raspberrypi ~ $ sudo iwlist wlan0 scan | grep ESSID ESSID:"TeleTu_74888B0060AD" ESSID:"MY-NETWORK" ESSID:"FASTWEB-1-PT6NtjL4TOSe" ESSID:"DC" So I reboot the system and I remove the ethernet cable but when I try to connect again to my raspberry I obatin the following error message: andrea@andrea-virtual-machine:~$ sudo ssh [email protected] ssh: connect to host 192.168.1.9 port 22: No route to host It seems that it can't connect using wireless. What could be the problem? What am I missing? How can I solve this situation? Tnx

    Read the article

  • Degraded RAID5 and no md superblock on one of remaining drive

    - by ark1214
    This is actually on a QNAP TS-509 NAS. The RAID is basically a Linux RAID. The NAS was configured with RAID 5 with 5 drives (/md0 with /dev/sd[abcde]3). At some point, /dev/sde failed and drive was replaced. While rebuilding (and not completed), the NAS rebooted itself and /dev/sdc dropped out of the array. Now the array can't start because essentially 2 drives have dropped out. I disconnected /dev/sde and hoped that /md0 can resume in degraded mode, but no luck.. Further investigation shows that /dev/sdc3 has no md superblock. The data should be good since the array was unable to assemble after /dev/sdc dropped off. All the searches I done showed how to reassemble the array assuming 1 bad drive. But I think I just need to restore the superblock on /dev/sdc3 and that should bring the array up to a degraded mode which will allow me to backup data and then proceed with rebuilding with adding /dev/sde. Any help would be greatly appreciated. mdstat does not show /dev/md0 # cat /proc/mdstat Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] [multipath] md5 : active raid1 sdd2[2](S) sdc2[3](S) sdb2[1] sda2[0] 530048 blocks [2/2] [UU] md13 : active raid1 sdd4[3] sdc4[2] sdb4[1] sda4[0] 458880 blocks [5/4] [UUUU_] bitmap: 40/57 pages [160KB], 4KB chunk md9 : active raid1 sdd1[3] sdc1[2] sdb1[1] sda1[0] 530048 blocks [5/4] [UUUU_] bitmap: 33/65 pages [132KB], 4KB chunk mdadm show /dev/md0 is still there # mdadm --examine --scan ARRAY /dev/md9 level=raid1 num-devices=5 UUID=271bf0f7:faf1f2c2:967631a4:3c0fa888 ARRAY /dev/md5 level=raid1 num-devices=2 UUID=0d75de26:0759d153:5524b8ea:86a3ee0d spares=2 ARRAY /dev/md0 level=raid5 num-devices=5 UUID=ce3e369b:4ff9ddd2:3639798a:e3889841 ARRAY /dev/md13 level=raid1 num-devices=5 UUID=7384c159:ea48a152:a1cdc8f2:c8d79a9c With /dev/sde removed, here is the mdadm examine output showing sdc3 has no md superblock # mdadm --examine /dev/sda3 /dev/sda3: Magic : a92b4efc Version : 00.90.00 UUID : ce3e369b:4ff9ddd2:3639798a:e3889841 Creation Time : Sat Dec 8 15:01:19 2012 Raid Level : raid5 Used Dev Size : 1463569600 (1395.77 GiB 1498.70 GB) Array Size : 5854278400 (5583.08 GiB 5994.78 GB) Raid Devices : 5 Total Devices : 4 Preferred Minor : 0 Update Time : Sat Dec 8 15:06:17 2012 State : active Active Devices : 4 Working Devices : 4 Failed Devices : 1 Spare Devices : 0 Checksum : d9e9ff0e - correct Events : 0.394 Layout : left-symmetric Chunk Size : 64K Number Major Minor RaidDevice State this 0 8 3 0 active sync /dev/sda3 0 0 8 3 0 active sync /dev/sda3 1 1 8 19 1 active sync /dev/sdb3 2 2 8 35 2 active sync /dev/sdc3 3 3 8 51 3 active sync /dev/sdd3 4 4 0 0 4 faulty removed [~] # mdadm --examine /dev/sdb3 /dev/sdb3: Magic : a92b4efc Version : 00.90.00 UUID : ce3e369b:4ff9ddd2:3639798a:e3889841 Creation Time : Sat Dec 8 15:01:19 2012 Raid Level : raid5 Used Dev Size : 1463569600 (1395.77 GiB 1498.70 GB) Array Size : 5854278400 (5583.08 GiB 5994.78 GB) Raid Devices : 5 Total Devices : 4 Preferred Minor : 0 Update Time : Sat Dec 8 15:06:17 2012 State : active Active Devices : 4 Working Devices : 4 Failed Devices : 1 Spare Devices : 0 Checksum : d9e9ff20 - correct Events : 0.394 Layout : left-symmetric Chunk Size : 64K Number Major Minor RaidDevice State this 1 8 19 1 active sync /dev/sdb3 0 0 8 3 0 active sync /dev/sda3 1 1 8 19 1 active sync /dev/sdb3 2 2 8 35 2 active sync /dev/sdc3 3 3 8 51 3 active sync /dev/sdd3 4 4 0 0 4 faulty removed [~] # mdadm --examine /dev/sdc3 mdadm: No md superblock detected on /dev/sdc3. [~] # mdadm --examine /dev/sdd3 /dev/sdd3: Magic : a92b4efc Version : 00.90.00 UUID : ce3e369b:4ff9ddd2:3639798a:e3889841 Creation Time : Sat Dec 8 15:01:19 2012 Raid Level : raid5 Used Dev Size : 1463569600 (1395.77 GiB 1498.70 GB) Array Size : 5854278400 (5583.08 GiB 5994.78 GB) Raid Devices : 5 Total Devices : 4 Preferred Minor : 0 Update Time : Sat Dec 8 15:06:17 2012 State : active Active Devices : 4 Working Devices : 4 Failed Devices : 1 Spare Devices : 0 Checksum : d9e9ff44 - correct Events : 0.394 Layout : left-symmetric Chunk Size : 64K Number Major Minor RaidDevice State this 3 8 51 3 active sync /dev/sdd3 0 0 8 3 0 active sync /dev/sda3 1 1 8 19 1 active sync /dev/sdb3 2 2 8 35 2 active sync /dev/sdc3 3 3 8 51 3 active sync /dev/sdd3 4 4 0 0 4 faulty removed fdisk output shows /dev/sdc3 partition is still there. [~] # fdisk -l Disk /dev/sdx: 128 MB, 128057344 bytes 8 heads, 32 sectors/track, 977 cylinders Units = cylinders of 256 * 512 = 131072 bytes Device Boot Start End Blocks Id System /dev/sdx1 1 8 1008 83 Linux /dev/sdx2 9 440 55296 83 Linux /dev/sdx3 441 872 55296 83 Linux /dev/sdx4 873 977 13440 5 Extended /dev/sdx5 873 913 5232 83 Linux /dev/sdx6 914 977 8176 83 Linux Disk /dev/sda: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 * 1 66 530113+ 83 Linux /dev/sda2 67 132 530145 82 Linux swap / Solaris /dev/sda3 133 182338 1463569695 83 Linux /dev/sda4 182339 182400 498015 83 Linux Disk /dev/sda4: 469 MB, 469893120 bytes 2 heads, 4 sectors/track, 114720 cylinders Units = cylinders of 8 * 512 = 4096 bytes Disk /dev/sda4 doesn't contain a valid partition table Disk /dev/sdb: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdb1 * 1 66 530113+ 83 Linux /dev/sdb2 67 132 530145 82 Linux swap / Solaris /dev/sdb3 133 182338 1463569695 83 Linux /dev/sdb4 182339 182400 498015 83 Linux Disk /dev/sdc: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdc1 1 66 530125 83 Linux /dev/sdc2 67 132 530142 83 Linux /dev/sdc3 133 182338 1463569693 83 Linux /dev/sdc4 182339 182400 498012 83 Linux Disk /dev/sdd: 2000.3 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdd1 1 66 530125 83 Linux /dev/sdd2 67 132 530142 83 Linux /dev/sdd3 133 243138 1951945693 83 Linux /dev/sdd4 243139 243200 498012 83 Linux Disk /dev/md9: 542 MB, 542769152 bytes 2 heads, 4 sectors/track, 132512 cylinders Units = cylinders of 8 * 512 = 4096 bytes Disk /dev/md9 doesn't contain a valid partition table Disk /dev/md5: 542 MB, 542769152 bytes 2 heads, 4 sectors/track, 132512 cylinders Units = cylinders of 8 * 512 = 4096 bytes Disk /dev/md5 doesn't contain a valid partition table

    Read the article

  • Oracle Virtual Server OEL vm fails to start - kernel panic on cpu identify

    - by Towndrunk
    I am in the process of following a guide to setup various oracle vm templates, so far I have installed OVS 2. 2 and got the OVM Manager working, imported the template for OEL5U5 and created a vm from it.. the problem comes when starting that vm. The log in the OVMM console shows the following; Update VM Status - Running Configure CPU Cap Set CPU Cap: failed:<Exception: failed:<Exception: ['xm', 'sched-credit', '-d', '32_EM11g_OVM', '-c', '0'] => Error: Domain '32_EM11g_OVM' does not exist. StackTrace: File "/opt/ovs-agent-2.3/OVSXXenVMConfig.py", line 2531, in xen_set_cpu_cap run_cmd(args=['xm', File "/opt/ovs-agent-2.3/OVSCommons.py", line 92, in run_cmd raise Exception('%s => %s' % (args, err)) The xend.log shows; [2012-11-12 16:42:01 7581] DEBUG (DevController:139) Waiting for devices vtpm [2012-11-12 16:42:01 7581] INFO (XendDomain:1180) Domain 32_EM11g_OVM (3) unpaused. [2012-11-12 16:42:03 7581] WARNING (XendDomainInfo:1907) Domain has crashed: name=32_EM11g_OVM id=3. [2012-11-12 16:42:03 7581] ERROR (XendDomainInfo:2041) VM 32_EM11g_OVM restarting too fast (Elapsed time: 11.377262 seconds). Refusing to restart to avoid loops .> [2012-11-12 16:42:03 7581] DEBUG (XendDomainInfo:2757) XendDomainInfo.destroy: domid=3 [2012-11-12 16:42:12 7581] DEBUG (XendDomainInfo:2230) Destroying device model [2012-11-12 16:42:12 7581] INFO (image:553) 32_EM11g_OVM device model terminated I have set_on_crash="preserve" in the vm.cfg and have then run xm create -c to get the console screen while booting and this is the log of what happens.. Started domain 32_EM11g_OVM (id=4) Bootdata ok (command line is ro root=LABEL=/ ) Linux version 2.6.18-194.0.0.0.3.el5xen ([email protected]) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)) #1 SMP Mon Mar 29 18:27:00 EDT 2010 BIOS-provided physical RAM map: Xen: 0000000000000000 - 0000000180800000 (usable)> No mptable found. Built 1 zonelists. Total pages: 1574912 Kernel command line: ro root=LABEL=/ Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Xen reported: 1600.008 MHz processor. Console: colour dummy device 80x25 Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Software IO TLB disabled Memory: 6155256k/6299648k available (2514k kernel code, 135548k reserved, 1394k data, 184k init) Calibrating delay using timer specific routine.. 4006.42 BogoMIPS (lpj=8012858) Security Framework v1.0.0 initialized SELinux: Initializing. selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 16K (64 bytes/line) CPU: L2 Cache: 2048K (64 bytes/line) general protection fault: 0000 [1] SMP last sysfs file: CPU 0 Modules linked in: Pid: 0, comm: swapper Not tainted 2.6.18-194.0.0.0.3.el5xen #1 RIP: e030:[ffffffff80271280] [ffffffff80271280] identify_cpu+0x210/0x494 RSP: e02b:ffffffff80643f70 EFLAGS: 00010212 RAX: 0040401000810008 RBX: 0000000000000000 RCX: 00000000c001001f RDX: 0000000000404010 RSI: 0000000000000001 RDI: 0000000000000005 RBP: ffffffff8063e980 R08: 0000000000000025 R09: ffff8800019d1000 R10: 0000000000000026 R11: ffff88000102c400 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffffffff805d2000(0000) knlGS:0000000000000000 CS: e033 DS: 0000 ES: 0000 Process swapper (pid: 0, threadinfo ffffffff80642000, task ffffffff804f4b80) Stack: 0000000000000000 ffffffff802d09bb ffffffff804f4b80 0000000000000000 0000000021100800 0000000000000000 0000000000000000 ffffffff8064cb00 0000000000000000 0000000000000000 Call Trace: [ffffffff802d09bb] kmem_cache_zalloc+0x62/0x80 [ffffffff8064cb00] start_kernel+0x210/0x224 [ffffffff8064c1e5] _sinittext+0x1e5/0x1eb Code: 0f 30 b8 73 00 00 00 f0 0f ab 45 08 e9 f0 00 00 00 48 89 ef RIP [ffffffff80271280] identify_cpu+0x210/0x494 RSP ffffffff80643f70 0 Kernel panic - not syncing: Fatal exception clear as mud to me. are there any other logs that will help me? I have now deployed another vm from the same template and used the default vm settings rather than adding more memory etc - I get exactly the same error.

    Read the article

  • hostapd running on Ubuntu Server 13.04 only allows single station to connect when using wpa

    - by user450688
    Problem Only a single station can connect to hostapd at a time. Any single station can connect (W8, OSX, iOS, Nexus) but when two or more hosts are connected at the same time the first client loses its connectivity. However there are no connectivity issues when WPA is not used. Setup Linux (Ubuntu server 13.04) wireless router (with separate networks for wired WAN, wired LAN, and Wireless LAN. iptables-save output: *nat :PREROUTING ACCEPT [0:0] :INPUT ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] -A POSTROUTING -s 10.0.0.0/24 -o p4p1 -j MASQUERADE -A POSTROUTING -s 10.0.1.0/24 -o p4p1 -j MASQUERADE COMMIT *mangle :PREROUTING ACCEPT [13:916] :INPUT ACCEPT [9:708] :FORWARD ACCEPT [4:208] :OUTPUT ACCEPT [9:3492] :POSTROUTING ACCEPT [13:3700] COMMIT *filter :INPUT DROP [0:0] :FORWARD DROP [0:0] :OUTPUT ACCEPT [9:3492] -A INPUT -i p4p1 -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -i p4p1 -p tcp -m tcp --dport 22 -m state --state NEW -j ACCEPT -A INPUT -i eth0 -j ACCEPT -A INPUT -i wlan0 -j ACCEPT -A INPUT -i lo -j ACCEPT -A FORWARD -i p4p1 -m state --state RELATED,ESTABLISHED -j ACCEPT -A FORWARD -i eth0 -j ACCEPT -A FORWARD -i wlan0 -j ACCEPT -A FORWARD -i lo -j ACCEPT COMMIT /etc/hostapd/hostapd.conf #Wireless Interface interface=wlan0 driver=nl80211 ssid=<removed> hw_mode=g channel=6 max_num_sta=15 auth_algs=3 ieee80211n=1 wmm_enabled=1 wme_enabled=1 #Configure Hardware Capabilities of Interface ht_capab=[HT40+][SMPS-STATIC][GF][SHORT-GI-20][SHORT-GI-40][RX-STBC12] #Accept all MAC address macaddr_acl=0 #Shared Key Authentication wpa=1 wpa_passphrase=<removed> wpa_key_mgmt=WPA-PSK wpa_pairwise=CCMP rsn_pairwise=CCMP ###IPad Connectivevity Repair ieee8021x=0 eap_server=0 Wireless Card #lshw output product: RT2790 Wireless 802.11n 1T/2R PCIe vendor: Ralink corp. physical id: 0 bus info: pci@0000:03:00.0 logical name: mon.wlan0 version: 00 serial: <removed> width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list logical wireless ethernet physical configuration: broadcast=yes driver=rt2800pci driverversion=3.8.0-25-generic firmware=0.34 ip=10.0.1.254 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn #iw list output Band 1: Capabilities: 0x272 HT20/HT40 Static SM Power Save RX Greenfield RX HT20 SGI RX HT40 SGI RX STBC 2-streams Max AMSDU length: 3839 bytes No DSSS/CCK HT40 Maximum RX AMPDU length 65535 bytes (exponent: 0x003) Minimum RX AMPDU time spacing: 2 usec (0x04) HT RX MCS rate indexes supported: 0-15, 32 TX unequal modulation not supported HT TX Max spatial streams: 1 HT TX MCS rate indexes supported may differ Frequencies: * 2412 MHz [1] (27.0 dBm) * 2417 MHz [2] (27.0 dBm) * 2422 MHz [3] (27.0 dBm) * 2427 MHz [4] (27.0 dBm) * 2432 MHz [5] (27.0 dBm) * 2437 MHz [6] (27.0 dBm) * 2442 MHz [7] (27.0 dBm) * 2447 MHz [8] (27.0 dBm) * 2452 MHz [9] (27.0 dBm) * 2457 MHz [10] (27.0 dBm) * 2462 MHz [11] (27.0 dBm) * 2467 MHz [12] (disabled) * 2472 MHz [13] (disabled) * 2484 MHz [14] (disabled) Bitrates (non-HT): * 1.0 Mbps * 2.0 Mbps (short preamble supported) * 5.5 Mbps (short preamble supported) * 11.0 Mbps (short preamble supported) * 6.0 Mbps * 9.0 Mbps * 12.0 Mbps * 18.0 Mbps * 24.0 Mbps * 36.0 Mbps * 48.0 Mbps * 54.0 Mbps max # scan SSIDs: 4 max scan IEs length: 2257 bytes Coverage class: 0 (up to 0m) Supported Ciphers: * WEP40 (00-0f-ac:1) * WEP104 (00-0f-ac:5) * TKIP (00-0f-ac:2) * CCMP (00-0f-ac:4) Available Antennas: TX 0 RX 0 Supported interface modes: * IBSS * managed * AP * AP/VLAN * WDS * monitor * mesh point software interface modes (can always be added): * AP/VLAN * monitor valid interface combinations: * #{ AP } <= 8, total <= 8, #channels <= 1 Supported commands: * new_interface * set_interface * new_key * new_beacon * new_station * new_mpath * set_mesh_params * set_bss * authenticate * associate * deauthenticate * disassociate * join_ibss * join_mesh * set_tx_bitrate_mask * set_tx_bitrate_mask * action * frame_wait_cancel * set_wiphy_netns * set_channel * set_wds_peer * Unknown command (84) * Unknown command (87) * Unknown command (85) * Unknown command (89) * Unknown command (92) * testmode * connect * disconnect Supported TX frame types: * IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * mesh point: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * Unknown mode (10): 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 Supported RX frame types: * IBSS: 0x40 0xb0 0xc0 0xd0 * managed: 0x40 0xd0 * AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0 * AP/VLAN: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0 * mesh point: 0xb0 0xc0 0xd0 * P2P-client: 0x40 0xd0 * P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0 * Unknown mode (10): 0x40 0xd0 Device supports RSN-IBSS. HT Capability overrides: * MCS: ff ff ff ff ff ff ff ff ff ff * maximum A-MSDU length * supported channel width * short GI for 40 MHz * max A-MPDU length exponent * min MPDU start spacing Device supports TX status socket option. Device supports HT-IBSS.

    Read the article

  • FFMPEG dropping frames while encoding JPEG sequence at color change

    - by Matt
    I'm trying to put together a slide show using imagemagick and FFMPEG. I use imagemagick to expand a single photo into 30fps video (imagemagick also handles things like putting some text captions on the frames along the way). When I go to let ffmpeg digest it into a video it clips along nicely on the color parts of the video, but when it gets to a black and white section it reports "frame= 2030 fps=102 q=32766.0 Lsize= 5203kB time=00:01:07.60 bitrate= 630.5kbits/s dup=0 drop=703" and drops every frame of video until it hits something with color. As you can imagine this results in entire photos being removed from the slideshow. Here is my latest dump... ffmpeg -y -r 30 -i "teststream/%06d.jpg" -c:v libx264 -r 30 newffmpeg.mp4 ffmpeg version git-2012-12-10-c3bb333 Copyright (c) 2000-2012 the FFmpeg developers built on Dec 10 2012 22:02:04 with gcc 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) configuration: --enable-gpl --enable-libfaac --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-librtmp --enable-libtheora --enable-libvorbis --enable-libx264 --enable-nonfree --enable-version3 libavutil 52. 12.100 / 52. 12.100 libavcodec 54. 79.101 / 54. 79.101 libavformat 54. 49.100 / 54. 49.100 libavdevice 54. 3.102 / 54. 3.102 libavfilter 3. 26.101 / 3. 26.101 libswscale 2. 1.103 / 2. 1.103 libswresample 0. 17.102 / 0. 17.102 libpostproc 52. 2.100 / 52. 2.100 Input #0, image2, from 'teststream/%06d.jpg': Duration: 00:12:02.80, start: 0.000000, bitrate: N/A Stream #0:0: Video: mjpeg, yuvj444p, 720x480 [SAR 72:72 DAR 3:2], 25 fps, 25 tbr, 25 tbn, 25 tbc [libx264 @ 0x3450140] using SAR=1/1 [libx264 @ 0x3450140] using cpu capabilities: MMX2 SSE2Fast SSSE3 FastShuffle SSE4.2 [libx264 @ 0x3450140] profile High, level 3.0 [libx264 @ 0x3450140] 264 - core 129 r2 1cffe9f - H.264/MPEG-4 AVC codec - Copyleft 2003-2012 - http://www.videolan.org/x264.html - options: cabac=1 ref=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=12 lookahead_threads=2 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=23.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00 Output #0, mp4, to 'newffmpeg.mp4': Metadata: encoder : Lavf54.49.100 Stream #0:0: Video: h264 ([33][0][0][0] / 0x0021), yuvj420p, 720x480 [SAR 1:1 DAR 3:2], q=-1--1, 15360 tbn, 30 tbc Stream mapping: Stream #0:0 - #0:0 (mjpeg - libx264) Press [q] to stop, [?] for help Input stream #0:0 frame changed from size:720x480 fmt:yuvj444p to size:720x480 fmt:yuvj422p Input stream #0:0 frame changed from size:720x480 fmt:yuvj422p to size:720x480 fmt:yuvj444pp=584 frame= 2030 fps=102 q=32766.0 Lsize= 5203kB time=00:01:07.60 bitrate= 630.5kbits/s dup=0 drop=703 video:5179kB audio:0kB subtitle:0 global headers:0kB muxing overhead 0.472425% [libx264 @ 0x3450140] frame I:9 Avg QP:20.10 size: 33933 [libx264 @ 0x3450140] frame P:636 Avg QP:24.12 size: 6737 [libx264 @ 0x3450140] frame B:1385 Avg QP:27.04 size: 514 [libx264 @ 0x3450140] consecutive B-frames: 2.5% 15.2% 13.2% 69.2% [libx264 @ 0x3450140] mb I I16..4: 8.3% 80.3% 11.5% [libx264 @ 0x3450140] mb P I16..4: 1.5% 2.5% 0.2% P16..4: 41.7% 18.0% 10.3% 0.0% 0.0% skip:25.9% [libx264 @ 0x3450140] mb B I16..4: 0.0% 0.0% 0.0% B16..8: 26.6% 0.6% 0.1% direct: 0.2% skip:72.3% L0:35.0% L1:60.3% BI: 4.7% [libx264 @ 0x3450140] 8x8 transform intra:64.1% inter:75.1% [libx264 @ 0x3450140] coded y,uvDC,uvAC intra: 51.6% 78.0% 43.7% inter: 10.6% 14.9% 2.1% [libx264 @ 0x3450140] i16 v,h,dc,p: 29% 19% 6% 46% [libx264 @ 0x3450140] i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 23% 15% 17% 5% 9% 10% 7% 8% 6% [libx264 @ 0x3450140] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 31% 18% 11% 5% 9% 10% 6% 6% 4% [libx264 @ 0x3450140] i8c dc,h,v,p: 46% 18% 24% 12% [libx264 @ 0x3450140] Weighted P-Frames: Y:20.1% UV:18.7% [libx264 @ 0x3450140] ref P L0: 59.2% 23.2% 13.1% 4.3% 0.2% [libx264 @ 0x3450140] ref B L0: 88.7% 8.3% 3.0% [libx264 @ 0x3450140] ref B L1: 95.0% 5.0% [libx264 @ 0x3450140] kb/s:626.88 Received signal 2: terminating. One last note: If I remove the -r 30 from the input and output it works flawlessly. I have no idea why the -r 30 is causing it to freak out.

    Read the article

  • What's going on with my server? High load, lots of idle CPU time, low disk utilization

    - by Jonathan
    I run a web site and send a legitimate opt-in, daily email newsletter to subscribers. Both the web hosting and email sending are done by the same machine. I have about 100,000 subscribers who have opted in to my daily email newsletter. My PHP script did a pretty good job sending mail to all of them until fairly recently, but as the list has grown I can't keep up. When I run top, I have very high load--usually at least 6 or 7, sometimes as high as 15--even though I only have two CPUs. However, when I run sar, my CPU is idle an average of about 30% of the time. So, it seems I'm not CPU bound. When I run iostat, it seems as though I'm not disk bound because my %util for each device is very low (no more than 5%). Given that I don't seem to be CPU bound or disk bound, why is top reporting such high load? Additionally, since I don't seem to be CPU bound or disk bound, why is my email sending script not able to keep up? Here's what I see when running top: top - 11:33:28 up 74 days, 18:49, 2 users, load average: 7.65, 8.79, 8.28 Tasks: 168 total, 5 running, 162 sleeping, 0 stopped, 1 zombie Cpu(s): 38.9%us, 58.6%sy, 0.8%ni, 0.0%id, 0.7%wa, 0.2%hi, 0.8%si, 0.0%st Mem: 3083012k total, 2144436k used, 938576k free, 281136k buffers Swap: 2048248k total, 39164k used, 2009084k free, 1470412k cached Here's what I see when running iostat -mx: avg-cpu: %user %nice %system %iowait %steal %idle 34.80 1.20 55.24 0.37 0.00 8.38 Device: rrqm/s wrqm/s r/s w/s rMB/s wMB/s avgrq-sz avgqu-sz await svctm %util sda 0.19 71.70 1.59 29.45 0.02 0.07 5.90 0.55 17.82 1.16 3.59 sda1 0.00 0.00 0.00 0.00 0.00 0.00 7.10 0.00 13.80 13.72 0.00 sda2 0.05 50.45 1.13 24.57 0.01 0.29 24.25 0.35 13.43 1.15 2.97 sda3 0.05 10.17 0.20 2.33 0.01 0.05 43.75 0.05 20.96 2.45 0.62 sda4 0.00 0.00 0.00 0.00 0.00 0.00 2.00 0.00 70.50 70.50 0.00 sda5 0.07 0.22 0.03 0.07 0.00 0.00 32.84 0.08 856.19 8.03 0.08 sda6 0.02 5.45 0.03 0.72 0.00 0.02 67.55 0.02 26.72 5.26 0.39 sda7 0.00 1.56 0.00 0.42 0.00 0.01 38.04 0.00 8.88 5.84 0.24 sda8 0.01 3.84 0.20 1.35 0.00 0.02 28.55 0.05 31.90 4.08 0.63 Here's what I see when running sar: 09:40:02 AM CPU %user %nice %system %iowait %steal %idle 09:50:01 AM all 30.59 1.01 49.80 0.23 0.00 18.37 10:00:08 AM all 31.73 0.92 51.66 0.13 0.00 15.55 10:10:06 AM all 30.43 0.99 48.94 0.26 0.00 19.38 10:20:01 AM all 29.58 1.00 47.76 0.25 0.00 21.42 10:30:01 AM all 29.37 1.02 47.30 0.18 0.00 22.13 10:40:06 AM all 32.50 1.01 52.94 0.16 0.00 13.39 10:50:01 AM all 30.49 1.00 49.59 0.15 0.00 18.77 11:00:01 AM all 29.43 0.99 47.71 0.17 0.00 21.71 11:10:07 AM all 30.26 0.93 49.48 0.83 0.00 18.50 11:20:02 AM all 29.83 0.81 48.51 1.32 0.00 19.52 11:30:06 AM all 31.18 0.88 51.33 1.15 0.00 15.47 Average: all 26.21 1.15 42.62 0.48 0.00 29.54 Here are the top handful of processes listed at the particular time I happened to run top -c: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 8180 mysql 16 0 57448 19m 2948 S 26.6 0.7 4702:26 /usr/sbin/mysqld --basedir=/ --datadir=/var/lib/mysql --user=mysql --pid-file=/var/lib/mysql/bristno.pid --skip-external-locking 26956 brristno 17 0 0 0 0 Z 8.0 0.0 0:00.24 [php] <defunct> 26958 brristno 17 0 94408 43m 37m R 5.0 1.4 0:00.15 /usr/bin/php /home/brristno/public_html/dbv.php 22852 nobody 16 0 9628 2900 1524 S 0.7 0.1 0:00.17 /usr/local/apache/bin/httpd -k start -DSSL 8591 brristno 34 19 96896 13m 6652 S 0.3 0.4 0:29.82 /usr/local/bin/php /home/brristno/bin/mailer.php 1qwqyb6 i0gbor 24469 nobody 16 0 9628 2880 1508 S 0.3 0.1 0:00.08 /usr/local/apache/bin/httpd -k start -DSSL 25495 nobody 15 0 9628 2876 1500 S 0.3 0.1 0:00.06 /usr/local/apache/bin/httpd -k start -DSSL 26149 nobody 15 0 9628 2864 1504 S 0.3 0.1 0:00.04 /usr/local/apache/bin/httpd -k start -DSSL

    Read the article

  • libvirt upgrade caused vms to not see drives (boot media not found)

    - by bias
    I upgraded to Ubuntu 12.04.1 and now libvirt (via open nebula) successfully runs vms but they aren't finding the 2 drives (specifically, the boot drive). One is "hd" the other is "cdrom". The machine boots but fails and displays something like "boot media not found hd" (this was in a vnc terminal and I didn't copy the output anywhere so that's not the verbatim message). I tried constructing a new disk using the new version of qemu (via vmbuilder) and this new machine has the same problem as the old machine. In case it matters (I can't see why it would) I'm using open nebula to manage the machines. There's nothing relevant in any of the logs: syslog, libvirtd, oned. Which is to say nothing interesting/anomalous is reported when the machine is brought up. Versions libvirt 0.9.8-2ubuntu17.4 qemu-kvm 1.0+noroms-0ubuntu14.3 The libvirt xml config portions (relavent) <os> <type arch='x86_64' machine='pc-1.0'>hvm</type> <boot dev='hd'/> </os> ... <devices> <emulator>/usr/bin/kvm</emulator> <disk type='file' device='disk'> <driver name='qemu' type='qcow2'/> <source file='/var/lib/one//203/images/disk.0'/> <target dev='sda' bus='scsi'/> <alias name='scsi0-0-0'/> <address type='drive' controller='0' bus='0' unit='0'/> </disk> <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <source file='/var/lib/one//203/images/disk.1'/> <target dev='sdc' bus='scsi'/> <readonly/> <alias name='scsi0-0-2'/> <address type='drive' controller='0' bus='0' unit='2'/> </disk> <controller type='scsi' index='0'> <alias name='scsi0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> </controller> <memballoon model='virtio'> <alias name='balloon0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/> </memballoon> ... </devices> The libvirt/qemu log contains 2012-11-25 22:19:24.328+0000: starting up LC_ALL=C PATH=/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/sbin:/sbin:/bin QEMU_AUDIO_DRV=none /usr/bin/kvm -S -M pc-1.0 -enable-kvm -m 256 -smp 1,sockets=1,cores=1,threads=1 -name one-204 -uuid 4be6c276-19e8-bdc2-e9c9-9ca5352f2be3 -nodefconfig -nodefaults -chardev socket,id=charmonitor,path=/var/lib/libvirt/qemu/one-204.monitor,server,nowait -mon chardev=charmonitor,id=monitor,mode=control -rtc base=utc -no-shutdown -device lsi,id=scsi0,bus=pci.0,addr=0x5 -drive file=/var/lib/one//204/images/disk.0,if=none,id=drive-scsi0-0-0,format=qcow2 -device scsi-disk,bus=scsi0.0,scsi-id=0,drive=drive-scsi0-0-0,id=scsi0-0-0,bootindex=1 -drive file=/var/lib/one//204/images/disk.1,if=none,media=cdrom,id=drive-scsi0-0-2,readonly=on,format=raw -device scsi-disk,bus=scsi0.0,scsi-id=2,drive=drive-scsi0-0-2,id=scsi0-0-2 -netdev tap,fd=18,id=hostnet0 -device rtl8139,netdev=hostnet0,id=net0,mac=02:00:c0:a8:00:68,bus=pci.0,addr=0x3 -netdev tap,fd=19,id=hostnet1 -device rtl8139,netdev=hostnet1,id=net1,mac=02:00:ad:f0:1b:94,bus=pci.0,addr=0x4 -usb -vnc 0.0.0.0:204 -vga cirrus -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x6 kvm: -device rtl8139,netdev=hostnet0,id=net0,mac=02:00:c0:a8:00:68,bus=pci.0,addr=0x3: pci_add_option_rom: failed to find romfile "pxe-rtl8139.rom" kvm: -device rtl8139,netdev=hostnet1,id=net1,mac=02:00:ad:f0:1b:94,bus=pci.0,addr=0x4: pci_add_option_rom: failed to find romfile "pxe-rtl8139.rom"

    Read the article

  • New Cumulative Updates for SQL Server 2005 & SQL Server 2008 R2

    - by AaronBertrand
    Early this morning, the SQL Server Release Services team pushed out three new cumulative updates for SQL Server. KB #2489375 - SQL Server 2005 SP3 CU #14 (9.00.4317) KB #2489409 - SQL Server 2005 SP4 CU #2 (9.00.5259) KB #2489376 - SQL Server 2008 R2 CU #6 (10.50.1765) There are a lot more fixes in the 2008 R2 update - 43, by my count. In comparison, only 9 fixes for 2005 SP4, and only 2 fixes for 2005 SP3. You can draw your own conclusions from that data, particularly if you are still on SQL Server...(read more)

    Read the article

  • Acer Aspire blank screen

    - by Gerep
    I'm using Ubuntu 11.04 Natty and when I installed it I had a problem with blank screen on startup and found a solution but I have the same problem when it is inactive and goes blank screen, it won't come back, so I have to restart. Any ideas? Thanks in advance for any help. This is what solved my first problem: When you start editing the /etc/rc.local and add before exit 0: setpci -s 00:02.0 F4.B=00 Edit /etc/default/grub, edit the line GRUB_CMDLINE_LINUX_DEFAULT: GRUB_CMDLINE_LINUX_DEFAULT = "quiet splash acpi_osi = Linux" Update grub with: sudo update-grub2

    Read the article

  • Build Open JDK 7 on Mac OSX (TOTD #172)

    - by arungupta
    The complete requirements, pre-requisites, and steps to build OpenJDK 7 port on Mac OSX are described here. The steps are very clearly explained and here are the exact ones I followed on my MacBook Pro 10.7.2: Confirm the version of pre-installed Java as: > java -versionjava version "1.6.0_26"Java(TM) SE Runtime Environment (build 1.6.0_26-b03-383-11A511c)Java HotSpot(TM) 64-Bit Server VM (build 20.1-b02-383, mixed mode) Download and install Mercurial from mercurial.berkwood.com (zip bundle for 10.7 is here). It gets installed in the /usr/local/bin directory. Get the source code as (commands highlighted in bold): hg clone http://hg.openjdk.java.net/macosx-port/macosx-port destination directory: macosx-port requesting all changes adding changesets adding manifests adding file changes added 437 changesets with 364 changes to 33 files updating to branch default 31 files updated, 0 files merged, 0 files removed, 0 files unresolved cd macosx-port chmod 7555 get_source.sh ./get_source.sh # Repos:  corba jaxp jaxws langtools jdk hotspot Starting on corba Starting on jaxp Starting on jaxws Starting on langtools Starting on jdk Starting on hotspot # hg clone http://hg.openjdk.java.net/macosx-port/macosx-port/corba corba requesting all changes adding changesets adding manifests adding file changes added 396 changesets with 3275 changes to 1379 files . . . # exit code 0 # cd ./corba && hg pull -u pulling from http://hg.openjdk.java.net/macosx-port/macosx-port/corba searching for changes no changes found # exit code 0 # cd ./jaxp && hg pull -u pulling from http://hg.openjdk.java.net/macosx-port/macosx-port/jaxp searching for changes no changes found # exit code 0 Install Xcode from the App Store. Include /Developer/usr/bin in PATH. Note: JDK 1.6.0_26 ame pre-installed on my laptop and I installed Xode after that. The compilation went fine and there was no need to re-install the Java for Mac OS X as mentioned in the original steps. Build the code as: make ALLOW_DOWNLOADS=true SA_APPLE_BOOT_JAVA=true ALWAYS_PASS_TEST_GAMMA=true ALT_BOOTDIR=`/usr/libexec/java_home -v 1.6` HOTSPOT_BUILD_JOBS=`sysctl -n hw.ncpu` The final output is shown as: >>>Finished making images @ Sat Nov 19 00:59:04 WET 2011 ... >>>Finished making images @ Sat Nov 19 00:59:04 WET 2011 ...############################################################################# Leaving jdk for target(s) sanity all docs images ################################################################################## Build time 00:17:42 jdk for target(s) sanity all docs images ############################################################################### Build times ##########Target all_product_buildStart 2011-11-19 00:32:40End 2011-11-19 00:59:0400:01:46 corba00:04:07 hotspot00:00:51 jaxp00:01:21 jaxws00:17:42 jdk00:00:37 langtools00:26:24 TOTAL######################### Change the directory and verify the version: >cd build/macosx-universal/j2sdk-image/1.7.0.jdk/Contents/Home/bin >./java -version openjdk version "1.7.0-internal" OpenJDK Runtime Environment (build 1.7.0-internal-arungup_2011_11_19_00_32-b00) OpenJDK 64-Bit Server VM (build 21.0-b17, mixed mode) Now go fix some bugs, file new bugs, or discuss at the macosx-port-dev mailing list.

    Read the article

  • Invitation: WebCenter Implementation Specialist Exam Preparation Webcasts

    - by rituchhibber
    Oracle Partner Network would like to invite you to Refresh Courses for WebCenter Content and WebCenter Portal, to help partners to prepare for the WebCenter Implementation Specialist EXAMS.This is a 3 hours intensive refresher partner-only training session, providing attendees with an overview of WebCenter Content and WebCenter Portal functions and related topics. After the refresher part you will be able to take the relevant Implementation Specialist EXAM depending on your personal focus. NOTE: This is only suitable for experienced WebCenter Content or WebCenter Portal practitioners Who should attend?Partner Consultants who want to become an Oracle WebCenter Content or a WebCenter Portal Certified Implementation Specialist or both, that will help them to differentiate themselves in front of customers and support their Companies to become Specialized. Webcast Details: Date Topic Speaker  Web Call Details  Intercall Details  December 14th WebCenter Content RefreshCourse Markus Neubauer, SilburyWebCenter Content Specialized Partner Join Webcast Dial-in numbers:CC/SP: 1579222/9221 Time: 12:00 -15:00 CET Break around 13:30 Conference ID/Key: 9249533/1412 Date Topic Speaker Web Call Details Intercall Details January 10th                  WebCenter Portal    Refresh Course                   Yannick Ongena, InfoMentumWebCenter Portal Specialized Partner                     Join Webcast Dial-in numbers:CC/SP: 1579222/9221 Time: 12:00 -15:00 CET Break around 13:30 Conference ID/Key: 9249375/1001 Date Topic Speaker Web Call Details Intercall Details February 22nd                WebCenter Content  RefreshCourse Markus Neubauer, SilburyWebCenter Content Specialized Partner    Join Webcast Dial-in numbers:CC/SP: 1579222/9221 Time: 12:00 -15:00 CET Break around13:30 Conference ID/Key: 9249541/2202 Date Topic Speaker Web Call Details Intercall Details  March 13th                WebCenter Portal   Refresh     Course      Yannick Ongena, InfoMentumWebCenter Portal Specialized Partner    Join Webcast Dial-in numbers:CC/SP: 1579222/9221 Time: 12:00 -15:00 CET Break around 13:30 Conference ID/Key: 9249549/1303 Local dial-in numbers can be found here . Next Steps:After the Webcast you will receive the Training material and FREE Vouchers to book and take the: Oracle ECM 11g Certified Implementation Specialist EXAM Oracle WebCenter 11g Essentials EXAM Booking with Voucher can be done on www.pearsonvue.com. Note: FREE Vouchers will be send after attending the webcast.

    Read the article

  • Ralink rt3090 driver installed and wireless doesn't work on Ubuntu 10.04

    - by Marcus Rene
    I have a LG A-410 lap-top (64 bits) with rt 3090 wireless card. Searching the problem I discover that I already have a rt 3090-dkms installed, but my wireless doesn't work. *-network UNCLAIMED description: Network controller product: RT3090 Wireless 802.11n 1T/1R PCIe vendor: RaLink physical id: 0 bus info: pci@0000:02:00.0 version: 00 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:e5400000-e540ffff

    Read the article

  • Static background noise while using new headset Ubuntu 13.04

    - by ThundLayr
    Today I bought a new gaming headset (Gx-Gaming Lychas), and when I tried to record some gameplay-comentary I noticed that there always is a static background noise, I just recorded an example so you guys can listen it (no downloaded needed): http://www47.zippyshare.com/v/65167832/file.html I'm using Kubuntu 13.04 and Kernel version is 3.8.0-19, my laptop is an Acer Travelmate 5760Z, I tried tons of configurations on Alsamixer and none of them made result, I really need to get this working so any kind of help will be very aprecciated. cat /proc/asound/cards: 0 [PCH ]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0xc6400000 irq 44 cat /proc/asound/card0/codec#0 Codec: Conexant CX20588 Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x14f1506c Subsystem Id: 0x10250574 Revision Id: 0x100003 No Modem Function Group found Default PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D1 D2 D3 D3cold CLKSTOP EPSS Power: setting=D0, actual=D0 GPIO: io=4, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x10 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L Control: name="Headphone Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Headphone Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="CX20588 Analog", type="Audio", device=0 Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1 Amp-Out vals: [0x4a 0x4a] Converter: stream=8, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x11 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L Control: name="Speaker Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Speaker Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1 Amp-Out vals: [0x80 0x80] Converter: stream=8, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x12 [Audio Output] wcaps 0x611: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x13 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out Control: name="Beep Playback Volume", index=0, device=0 ControlAmp: chs=1, dir=Out, idx=0, ofs=0 Control: name="Beep Playback Switch", index=0, device=0 ControlAmp: chs=1, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x07, nsteps=0x07, stepsize=0x0f, mute=0 Amp-Out vals: [0x00] Node 0x14 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L Control: name="Capture Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Capture Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Device: name="CX20588 Analog", type="Audio", device=0 Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1 Amp-In vals: [0x50 0x50] [0x80 0x80] [0x80 0x80] [0x80 0x80] Converter: stream=4, channel=0 SDI-Select: 0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x17* 0x18 0x23 0x24 Node 0x15 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1 Amp-In vals: [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x17* 0x18 0x23 0x24 Node 0x16 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1 Amp-In vals: [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x17* 0x18 0x23 0x24 Node 0x17 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out Control: name="Mic Boost Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-Out vals: [0x04 0x04] Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x1a 0x1b* 0x1d 0x1e Node 0x18 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-Out vals: [0x00 0x00] Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x1a* 0x1b 0x1d 0x1e Node 0x19 [Pin Complex] wcaps 0x400581: Stereo Control: name="Headphone Jack", index=0, device=0 Pincap 0x0000001c: OUT HP Detect Pin Default 0x04214040: [Jack] HP Out at Ext Right Conn = 1/8, Color = Green DefAssociation = 0x4, Sequence = 0x0 Pin-ctls: 0xc0: OUT HP Unsolicited: tag=01, enabled=1 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10* 0x11 Node 0x1a [Pin Complex] wcaps 0x400481: Stereo Control: name="Internal Mic Phantom Jack", index=0, device=0 Pincap 0x00001324: IN Detect Vref caps: HIZ 50 80 Pin Default 0x90a70130: [Fixed] Mic at Int N/A Conn = Analog, Color = Unknown DefAssociation = 0x3, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x1b [Pin Complex] wcaps 0x400581: Stereo Control: name="Mic Jack", index=0, device=0 Pincap 0x00011334: IN OUT EAPD Detect Vref caps: HIZ 50 80 EAPD 0x0: Pin Default 0x04a19020: [Jack] Mic at Ext Right Conn = 1/8, Color = Pink DefAssociation = 0x2, Sequence = 0x0 Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=02, enabled=1 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10* 0x11 Node 0x1c [Pin Complex] wcaps 0x400581: Stereo Pincap 0x00000014: OUT Detect Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10* 0x11 Node 0x1d [Pin Complex] wcaps 0x400581: Stereo Pincap 0x00010034: IN OUT EAPD Detect EAPD 0x0: Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10* 0x11 Node 0x1e [Pin Complex] wcaps 0x400481: Stereo Pincap 0x00000024: IN Detect Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x1f [Pin Complex] wcaps 0x400501: Stereo Control: name="Speaker Phantom Jack", index=0, device=0 Pincap 0x00000010: OUT Pin Default 0x92170110: [Fixed] Speaker at Int Front Conn = Analog, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10 0x11* Node 0x20 [Pin Complex] wcaps 0x400781: Stereo Digital Pincap 0x00000010: OUT Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 1 0x12 Node 0x21 [Audio Output] wcaps 0x611: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x22 [Pin Complex] wcaps 0x400781: Stereo Digital Pincap 0x00000010: OUT Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 1 0x21 Node 0x23 [Pin Complex] wcaps 0x40040b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x04, stepsize=0x2f, mute=0 Amp-In vals: [0x00 0x00] Pincap 0x00000020: IN Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x24 [Audio Mixer] wcaps 0x20050b: Stereo Amp-In Amp-In caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10 0x11 Node 0x25 [Vendor Defined Widget] wcaps 0xf00000: Mono

    Read the article

< Previous Page | 46 47 48 49 50 51 52 53 54 55 56 57  | Next Page >