Search Results

Search found 1709 results on 69 pages for 'guy schaller'.

Page 50/69 | < Previous Page | 46 47 48 49 50 51 52 53 54 55 56 57  | Next Page >

  • Usage of Pirated software at a company

    - by hakesh
    Hi, I am redirected from stack over flow since the topic is ethics rather than about programming. Thank you for letting me know that. and please give me advices. So, I started to work at a company as an engineer a couple of months ago. It's a small company and what they basically do is answering service on phones. Now they are switching from normal phones to IP phones so that computers take more important place in the work. However, all the computers used by workers are equipped with pirated software ,even their operating systems are. Moreover, they don't even buy one license to make copies for other computers. In other words, they do not spend any money for the software in office. I am not saying copying a licensed one is legit, but the situation is too much. There is one guy who did installing those pirated soft. He does not feel any sense of guilt and even justified when I asked about it. and he is not even a specialist. He just searched on the internet to install pirated software. Our boss does not have any knowledge of computers, so he took cheaper way. How do you guys think about this? Since I am still new to the company, I am not doing maintenance or managing on those cracked computers. But I have to use those software daily. And later on I will be doing support, help desk kind of staff. I really don't want to take responsibility for operating pirated software. and from an aspect of developer and engineer, pirated software are not able to get legal support and it may work unexpectedly. So, I am thinking about changing job. Am I thinking too much? should I wait until I have more credit from the boss and try to change his policy? So far, the boss does not take any words from me. Any opinions are welcome. Thank you

    Read the article

  • Did I choose proper career path? [closed]

    - by Liston Catch
    I am a C# Junior. My company has it's own enterprise documents-flow system written, my job along with 10 other programmers is to write modules/add-ons for it. I am totally bored of this job, I dont like Microsoft's technologies stack (dont hate me here, just subjective), but it's plain boring, enterprise is boring (subjective again, everyone's tastes differ), days on this work last long and I am tired of it. In short - I dont like my job. In my spare time I am doing PHP-development and I totally like it. I am also doing web-design, so I am LAMP-kind of guy who loves his Ubuntu and does design aswell. I know that most programmers don't do design themselves, so some person is either all about design or all about coding, but I enjoy both and do both. I often get interesting sites orders, I love to make whole websites with all the design, I love the feeling of site completeness, I enjoy talking with customers. I like that PHP is simple and skill cap is lower than one of java, meaning I can become expert in it after some years. But C# (and J2EE also) pay more, and I am doing really good in C#. But I dont like it. I can go for J2EE, platform itself seems more fun to me rather than .NET, but EE development is still boring to me. But it seems higher payed, easier to find job (since PHP is too common for its easiness. But if you are expert in something it doesnt matter, right? Just a higher skillcap.) Question: I want to go on with freelance. I want to have an opportunity to start my own startup in web. Actually I have a browser-game already written by myself, it earns me around 500$ per month which I am really proud of since I am 21 only and still noob in coding. I want to find part-time PHP job. 3 days per week so I can get some stable income, I can work in team and learn from them, social factor matters aswell as ensurance and diversity. I also want my total income (freelance + part-time job + own startup maybe)to be not too much less than one I have working in EE development sector. Maximum of 25% lower, but not more. Is it all possible if I stick with web-development (LAMP + HTML/CSS/JS/Jquery/AJAX)? Or is it easier to reach my goals with EE development?

    Read the article

  • Should we persist with an employee still writing bad code after many years?

    - by user94986
    I've been assigned the task of managing developers for a well-established company. They have a single developer who specialises in all their C++ coding (since forever), but the quality of the work is abysmal. Code reviews and testing have revealed many problems, one of the worst being memory leaks. The developer has never tested his code for leaks, and I discovered that the applications could leak many MBs with only a minute of use. User's were reporting huge slowdowns, and his take was, "it's nothing to do with me - if they quit and restart, it's all good again." I've given him tools to detect and trace the leaks, and sat down with him for many hours to demonstrate how the tools are used, where the problems occur, and what to do to fix them. We're 6 months down the track, and I assigned him to write a new module. I reviewed it before it was integrated into our larger code base, and was dismayed to discover the same bad coding as before. The part that I find incomprehensible is that some of the coding is worse than amateurish. For example, he wanted a class (Foo) that could populate an object of another class (Bar). He decided that Foo would hold a reference to Bar, e.g.: class Foo { public: Foo(Bar& bar) : m_bar(bar) {} private: Bar& m_bar; }; But (for other reasons) he also needed a default constructor for Foo and, rather than question his initial design, he wrote this gem: Foo::Foo() : m_bar(*(new Bar)) {} So every time the default constructor is called, a Bar is leaked. To make matters worse, Foo allocates memory from the heap for 2 other objects, but he didn't write a destructor or copy constructor. So every allocation of Foo actually leaks 3 different objects, and you can imagine what happened when a Foo was copied. And - it only gets better - he repeated the same pattern on three other classes, so it isn't a one-off slip. The whole concept is wrong on so many levels. I would feel more understanding if this came from a total novice. But this guy has been doing this for many years and has had very focussed training and advice over the past few months. I realise he has been working without mentoring or peer reviews most of that time, but I'm beginning to feel he can't change. So my question is, would you persist with someone who is writing such obviously bad code?

    Read the article

  • Java???????·????????Java EE????JAX-RS 2.0??????Java Developers Workshop 2012 Summer????

    - by ???02
    ???Java??????????????????1?????“GlassFish Guy”??????????????·????????????·????????????8???????Java Developers Workshop 2012 Summer???????????????Java EE????2??????????????????????????????????(???) Java EE??????“????·?????”????? ??????·?????????Java????????????·???? Java??????????????????????????????Java??????????Java????????·????????????????????????????????Java????????Java EE 7?JAX-RS?????????????????? 1?????????Java EE 7 and HTML5: Developing for the Cloud????????Java EE??????????????·?????????????????????????????????? Java EE?????????2009?10?????????Java EE 6??????????????????????????4,000????????????????17?????????·????Java EE 6??????????????Java EE 6?????????????????????Java EE 6??????10??????? ?????????????????WAR???????????EJB??? ????Java EE???EJB????·???????????????????????????·???????(DD)?????????????????????Java EE 6????????????EJB?“?????”?????????POJO????????????????EJB????????????????????POJO?WAR??????????????????????DD???????????????????????????????????????(????) ??1??????????????????CDI(Context Dependency Injection)????DI????Java EE 5??????????????????????????????????Java EE 6?CDI???????????·?????????????DI???????????????????Spring Framework??????????????????????????Java EE???DI??????????????????????? ????????????Java EE????????????????????????????Amazon Web Services?Windows Azure????IaaS?Google App Engine????PaaS?Salesforce.com????SaaS?????????????????????·?????????????????????????????????????????????????????????????? ????????Java EE???????????????????????????????Java EE?????????????????·????????????Java EE??????????????????????????????????????????·?????????????? ??????????????????Java EE 7??????????????Java EE 8??????·??????????????????????????HTML5??3???????????????????????????????????????????????????????????????? ?????Java EE???????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????? ?????Cloud Application Service(??)??????????????????????????????????????????????????????????????????????????????? ???HTML5??????“Web??????·??????”????JSON?WebSockets??????????????Java EE???????????????Web????????????????????????WebSocket???????????????????????·?????????????WebSocket?????Java EE????????????????????????????? ???Java EE 7????????API????????????????????? ??????????????????·?????????????????????·????????????????????????????5??API??Java EE 7??????????????????????????????????????????????????????????????????????????????????????????????????????????????????(????)???? Java EE 7?????????????????API????????????????????????????2013??2??????????????????????????????????????????????????????????????????Web???(http://javaee-spec.java.net/)???????????????????????????????? ??????????Project Avatar???????????Project Avatar??????????Java????????????????????????????Java????????????HTML5???????????????????????????HTML?Java???????????????????????Java EE???????????????????????????????? JAX-RS 2.0?Java??????????????????? ???????2?????????JAX-RS 2.0: RESTful Java on Steroids???Java????RESTful?????????????API???JAX-RS?????Java EE 7???????JAX-RS 2.0???????????????????????????????? ?????????“RESTful”???????????????????? ????????????????????????????? ?????????????? ???????????????? ??????????????(??)??? ????????????????????(?????????????????) ????Java EE????????API?????????????JAX-RS 1.0??JAX-RS 1.0???POJO????API???HTTP??????????????????????????????????????????????? ????????????JAX-RS 2.0???????????8??????????/???????????? ?Client API ?Client-side and Server-side Asynchronous ?Filters and Interceptors ?Improved Connection Negotiation ?Validation ?Hypermedia ?Alignment with JSR 330 ?Model-View-Controller JAX-RS 2.0??????????????·????????????????????Model-View-Controller?????????????????????Model-View-Controller?????????JSF????MVC???????????????JAX-RS???????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????? ???Client API???????????????HTTP??????·????????????????????????API???????????????JAX-RS 2.0?Client API???JAX-RS?????API??????????????Java EE?????????????REST??????????????????? ?Filters&Interceptors????????????????????????JAX-RS??????????????????JAX-RS 1.0???????????JAX-RS 2.0??????????????????????? ?Asynchronus??????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????? ?Connect Negotiation???Validation???????????????????????Validation????????????????Bean Validation?????JAX-RS?????????????????????????? ?Hypermedia???????????????????Web???????????????????HATEOAS(Hypermedia As The Engine Of App State)?????JAX-RS????????????????????????????????Asynchronus???????????????????????????? JAX-RS 2.0???????????JSR 330:Dependency Injection for Java???????????????????Client API??????????????????????????????????????JAX-RS 2.0??????????????????????Web???????????·??????????(http://jcp.org/en/jsr/detail?id=339)????????????????????????????????????????

    Read the article

  • SOA Community Newsletter: nouvelle lettre !

    - by mseika
    SOA PARTNER COMMUNITY NEWSLETTERAUGUST 2012 Dear SOA partner community member Have you submitted your feedback on SOA Partner Community Survey 2012? This is the last chance to participate in the survey. We recommend you to complete the survey and help us to improve our SOA Community. Thanks to all attendees and trainers for their participation in the excellent Fusion Middleware Summer Camps held in Lisbon and Munich. I would also like to thank you for the great feedback and the nice reports provided by AMIS Technology Blog & Middleware by Link Consulting. Most of our courses have been overbooked, if you did not get a chance or missed it, we offer a wide range of online training and the course material. Key take-away from the advanced BPM course is to become an expert in ADF. Here is the course from Grant Ronald Learn Advanced ADF online available. The Link Consulting Team became experts in SOA Governance with EAMS and Oracle Enterprise Repository! We always encourage our community members to share their best practices and are very keen to publish it. Please let us know if you want to share your best practices through this medium.We encourage you to make use of the Specialization benefits - this month we are giving an opportunity to Promote Your SOA & BPM Events. Jürgen KressOracle SOA & BPM Partner Adoption EMEA NEW CONTENT Presentations & Training material OFM Summer CampsPromote Your SOA & BPM Events Advanced ADF Online, For Free By Grant BPM 11g Customer Stories & Solution Catalog & Process Accelerators Delivering SOA Governance with EAMS by Link Consulting Team WebLogic Server Provisioning and Patching News from our Partners & CommunityUpdated material by Oracle Connect and Network SOA Blogs SOA on Facebook SOA on LinkedIn SOA on Twitter Mix SOA Forum SOA Workspace PRESENTATIONS & TRAINING MATERIAL OFM SUMMER CAMPS Thanks to all attendees who invested their time and utilized the opportunity to attend the Summer Camps! Due to high demand of our most of the trainings, we had a long waiting list with more numbers of partners who are keen to attend it. We would like to give our special thanks to all trainers, who delivered excellent workshops! Most of the presentations and course material have been posted on our SOA Community Workspaceand WebLogic Community Workspace. You can access the content only if you are a registered community member. To register for the SOA Community please click here. You can register for the WebLogic Community here. To find out the first impressions of the event please visit our Facebook pages:www.facebook.com/WebLogicCommunity &www.facebook.com/soacommunity or Picasa AlbumThanks for the excellent blog posts from AMIS Technology Blog & Middleware by Link Consulting. Let us know if you published a twitter blog on@soacommunity & @wlscommunity. We will be pleased to publish it in our Newsletters. BPM Course Quotes “Its always easy, if you know, what you are doing” - Torsten Winterberg, Opitz“ The best ideas are the ideas from the best” - Filipe Sequeria, Primesoft “Best invest in the education in the last 12 months” - Richard Schaller, IPT “Practice best practice with the best instructor” - Graham Lamond Capgemini “If you have basic BPM knowledge, this is the course to really mater it” - Diogo Henriques Link Consulting “Very good trainers lot of work. Lot of fun as well” - Matthias Gris Workflow Factory “If you like to accelerate in Oracle come to the training to bring it all together” - Marcel van der Glind, Amis ADF Course Quotes "Excellent training, great opportunity to network!" - Frank Houweling, Amis "Lots of fun and good ideas" - Ana Santiago, GFI "Learn ADF, worth it Fusion Apps is the future" - Miguel Delgadillo, STO Consulting "The best way to learn Fusion Middleware from the #1" Alexandro Montantes, STO Consulting "Be advanced to to be the first” - Dimitar Petrov Fadata "Great opportunity to suck all the knowledge out of some very experienced product managers” - Wilfred von der Deijl, The Future Group WebLogic Course Quotes “Oracle trainings are the best” - Pedro Neto Novobas“ "Excellent training, well organized” - Pedro Antunh, Capgemini “This course dives you into Oracle WebLogic giving you a quick start on benefiting from Fusion Apps” - Leonardo Fernandes, Outsystems Additional Quotes “Thanks a lot again for organizing such a great and informative Summer Camp. Both training and networking were organized very professionally. I have gained tons of very useful Info, which will definitely help to increase quality of our future projects.” - Daniel Fasko fss-group.com I didn’t get the chance yesterday to thank you for a most enjoyable and thoroughly educational time I had in Munich over the last few days.” - Jeroen Bakker Ordina “Just to congratulate you on a great event, not only today but also in the previous days of training. As we know, a very good organization and, as a native Portuguese that knows Lisbon very good, a nice choice of places to visit. Looking forward to come again next year.” Pedro Miguel Neto, Novobase PROMOTE YOUR SOA & BPM EVENTS The Partner Event Publisher has just been made available to all SOA & BPM specialized partners in EMEA. Partners now have the opportunity to publish their events to theOracle.com/events site and spread the word on their upcoming live in-person and/or live webcast events. See the demo below and click here to read more information. ADVANCED ADF ONLINE, FOR FREE BY GRANT The second part of the advanced ADF online eCourse is Live now! This covers the advanced topics of region and region interaction as well as getting down and dirty with some of the layout features of ADF Faces, skinning and DVT components. The aim of this course is to give you a self-paced learning aid which covers the more advanced topics of ADF development. The content is developed by Product Management and our Curriculum development teams and is based on advanced training material we have been running internally for about 18 months. We will get started on the next chapter, but in the meantime, please have a look at chapters one and two. Back to top BPM 11G CUSTOMER STORIES & SOLUTION CATALOG & PROCESS ACCELERATORS Stories Everyone loves a good story on planning or implementing a BPM strategy. Everyone wants to hear how it was done before?, what worked?, what was achieved? If you have achieved success with BPM, we are very keen to hear your stories and examples of how your customers use it. We receive lots of requests from people who are thinking of using BPM to solve a specific problem or in combination with a specific technology to talk to someone who has done it before. These stories are invaluable. Drop down the details of anything you think is relevant with a bit of detail and we will follow up on it. As one good deed deserves another, we will do our best to give you stories if you need them to show that where you are going, others have treaded before. Send your stories to us using this e-mail link and we will share them among other like minded people. Solution Catalogue This summer, Oracle is launching a solution catalogue specifically intended for partners. If you have delivered a successful implementation in BPM and think it could be reused and applied again in a similar scenario in the same industry or in a similar environment, then we ware keen to know about it and will add it to the solution catalogue. The solution catalogue will showcase successful BPM solutions both inside and outside Oracle. Be in touch with us on this e-mail link and we will make sure to add your solution. Process AcceleratorsFinally if you have specific processes that you are expert on, you have implemented at a customer and you want to work with us on getting these productised, then we would love to know about it. The process accelerator programme is explained in the most recent SOA/BPM Community Newsletter but again feel free to contact us if you want to get involved. Good luck with BPM and let us know how we can help. Barry O'Reilly Director BPM [email protected] DELIVERING SOA GOVERNANCE WITH EAMS BY LINK CONSULTING TEAM In the last 12 years Link Consulting has been making its presence in specific areas such as Governance and Architecture, both in terms of practices and methodologies, products, know-how and technological expertise. The Enterprise Architecture Management System - Oracle Enterprise Edition (EAMS - OER Edition) is the result of this experience and combines the architecture management solution with OER in order to deliver a product specialized for SOA Governance that gathers the better of two worlds in solution that enables SOA Governance projects, initiatives and programs. Enterprise Architecture Management System Enterprise Architecture Management System (EAMS), is an automation based solution that enables the efficient management of Enterprise Architectures. The solution uses configured enterprise repositories and takes advantages of its features to provide automation capabilities to the users. EAMS provides capabilities to create/customize/analyze repository data, architectural blueprints, reports and analytic charts. Oracle Enterprise Repository Oracle Enterprise Repository (OER) is one of the major and central elements of the Oracle SOA Governance solution. Oracle Enterprise Repository provides the tools to manage and govern the metadata for any type of software asset, from business processes and services to patterns, frameworks, applications, components, and models. OER maps the relationships and inter-dependencies that connect those assets to improve impact analysis, promote and optimize their reuse, and measure their impact on the bottom line. It provides the visibility, feedback, controls, and analytics to keep your SOA on track to deliver business value. The intense focus on automation helps to overcome barriers to SOA adoption and streamline governance throughout the lifecycle. Core capabilities of the OER include: Asset Management Asset Lifecycle Management Usage Tracking Service Discovery Version Management Dependency Analysis Portfolio Management EAMS - OER Edition The solution takes the advantages and features from both products and combines them in a symbiotic tool that enhances the quality of SOA Governance Initiatives and Programs. EAMS is able to produce a vast number of outputs by combining its analytical engine, SOA-specific configurations and the assets in OER and other related tools, catalogs and repositories. The configurations encompass not only the extendable parametrization of the metadata but also fully configurable blueprints, PowerPoint reports, charts and queries. The SOA blueprints The solution comes with a set of predefined architectural representations that help the organization better perceive their SOA landscape. More blueprints can be easily created in order to accommodate the organizations needs in terms of detail, audience and metadata. Charts & Dashboards The solution encompasses a set of predefined charts and dashboards that promote a more agile way to control and explore the assets. Time Based Visualization All representations are time bound, and with EAMS - OER you can truly govern SOA with a complete view of the Past, Present and Future; The solution delivers Gap Analysis, a project oriented approach while taking into consideration the As-Was, As-Is an To-Be. Time based visualization differentiating factors: Extensive automation and maintenance of architectural representations Organization wide solution. Easy access and navigation to and between all architectural artifacts and representations. Flexible meta-model, customization and extensibility capabilities. Lifecycle management and enforcement of the time dimension over all the repository content. Profile based customization. Comprehensive visibility Architectural alignment Friendly and striking user interfaces For more information on EAMS visit us here. For more information on SOA visit us here. WEBLOGIC SERVER PROVISIONING AND PATCHING For access to the Oracle demo systems please visit OPN and talk to your Partner Expert.SOA Suite and BPM Suite runs on WebLogic! We are pleased to announce the availability of a WebLogic Server Management demo that showcases some of the key provisioning and patching capabilities of WebLogic Server Management Pack Enterprise Edition (EE). To learn more about these features - as well as other features of the pack - please visit the pack's saleskit page.Demo Highlights The demo showcases the following capabilities: Patching Oracle WebLogic Servers Standardizing WebLogic Server Patch Rollouts Creating a WebLogic Domain Provisioning Profile Cloning a WebLogic Domain from a Provisioning Profile Deploying a Java EE Application Scaling Out an Oracle WebLogic Cluster Demo Instructions Go to the DSS website for Oracle Partners. On the Standard Demo Launchpad page, under the “Software Lifecycle Automation” section, click on the link “EM Cloud Control 12c WLS Provisioning and Patching” (tagged as “NEW”). Specific demo launchpad page contains a link to the detailed demo script with instructions on how to show the demo.

    Read the article

  • How-To Configure Weblogic, Agile PLM and an F5 LTM

    - by Brian Dunbar
    Agile, Weblogic, and an F5 walk into a bar ... I've got this Agile PLM v 9.3 Running on WebLogic, two managed servers. An F5 BigIP LTM. We're upgrading from Agile v 9.2.1.4 running on OAS. The problem is that while the Windows client works fine the Java client does not. My setup is identical to one outlined in F5's doc: http://www.f5.com/pdf/deployment-guides/bea-bigip45-dg.pdf When I launch the java client it returns this error "Server is not valid or is unavailable." Oracle claims Agile PLM is setup correctly, but won't comment on the specifics of the load balancer. F5 reports the configuration is correct but can't comment on the specifics of the application. I am merely the guy in a vortex of finger-pointing who wants my application to work. It's that or give up on WLS and move back to OAS. Which has it's own problems but at least we know how it works. Any ideas?

    Read the article

  • Ideal Bacula appliance?

    - by Ricket
    I'm an intern at a small company and we (the IT department of two) manage <100 client computers and a handful of servers. Currently we're using a company's appliance to handle backup; it does a small backup every night and a full backup every weekend, and a guy comes on Wednesday to take an offsite backup drive (and gives back last week's drive to swap with it). Lately this system, mainly the appliance, has been having problems, so we are looking for an alternative. I'm researching other companies but also looking into what we might expect from trying to do this ourselves. There will undoubtedly be a large learning curve, but hey, that's what serverfault is for, right? :) So anyway I was looking at Bacula. Feature list sounds great, documentation is plentiful, but it's only software. So my question is, what is the ideal backup server to run the Bacula server software on? And not only the server but other related appliances. Our current backup appliance uses only hard drives, not tape drives. It has several plugged into it at one time, in hotswap bays on the front of the machine. I couldn't help but notice though, it's hardly more than Windows XP with hard drive bays, a PCI eSATA card (which connects to another appliance extension piece with 2 more bays), and their software. Since the company will take back their appliance if/when we cancel with them, where can I go to configure a server with these kinds of things? Maybe I'm being naive, I'm sure Dell (and any other computer company) sells them in the small business section of their website, but I wanted to make sure that there's not some other more recommended place that other companies are getting their hardware from, and that I don't need anything special for Bacula.

    Read the article

  • Zscaler. Certs, cookies, and port 80 traffic

    - by 54's_lol
    So I work at HQ for a large company that shall remain nameless. We use Zscaler and I had to roll out a 2048 cert per zscaler's request. People around me at work dont understand the technology and think that the cert's are what is allowing internet connectivity. From my understanding(and please chime in) is the cookie located C:\Users\$$$$$$4$$\AppData\Roaming\Macromedia\Flash Player#SharedObjects\Q3JQJQJV\gateway.zscaler.net\zscaler.swf here that gets created when you provide your creds the first time you use the browser. The cert's are just simply a way of inspecting the SSL traffic as zscaler had no way of doing this before without them. They are essentially using the classic MITM attack to parse your SSL traffic. Gmail is smart enough to recognize this as you get a warning. My question is this, is there a product or service that I can use to verify my web browser when at home(I.E. off company network) isn't still getting routed to zscaler's cloud? If i do a tracert that will work fine. It's the port 80 and 443 web traffic zscaler and my company is after. I would like to verify that when I'm off their premise that my web traffic is using only my isp and the path to whatever content I'm searching for. Do the cert's i'm pushing and browser authentication do something behind the curtain that forces web traffic to get routed to zscaler? I searched quite a bit and would very much like to know if I'm ever off company scrutiny. I do know zscaler offers the service to force the scenario im asking about. Can I prove how my web traffic is getting routed? Thanks for any insight. I've been a fan for a long time and your guy's kung fu is very strong:-)

    Read the article

  • Uploadify Flash Uploader and Random UPLOAD_ERR_CANT_WRITE errors

    - by dcneiner
    I am using Uploadify to provide progress bar support for file uploads on a PHP app I built. It works perfectly for a few uploads,then every few uploads it fails and the data from the $_FILES array reveals an UPLOAD_ERR_CANT_WRITE error. (Error code 7). I ran Paros proxy between my browser and the server to see the difference between a passing and failing request. The only difference was the content separator for the multi-part post which changes every time. I would conclude this was fully a server error, except with a plain jane form, I cannot reproduce the error. I am not a server guy, so please let me know what information is needed to troubleshoot this and I will update the question with those details. I did place these lines in the .htaccess, but to know avail. The site is hosted on Rackspace Cloudsites so my configuration options are limited: <IfModule mod_security.c> SecFilterEngine Off SecFilterScanPOST Off </IfModule> php_value upload_max_filesize 10M php_value post_max_size 10M php_value max_execution_time 200 php_value max_input_time 200

    Read the article

  • How do I use a Zyxel P660 router as just modem so that I can connect a WRT54GL router in cascade?

    - by Kenji Kina
    I have a Zyxel P660HW-t1 v2 router (which has a DSL port) and a WRT54GL router (which does not) and the exact same situation as in this thread (UPDATE: the connection between both devices is the important part, since I have been able to set the zyxel router to act as bridge by itself quite nicely. I have accessed my internet connection directly through a PC using PPPoE without any problems, the issues arise when I try to connect the WRT54GL router between the zyxel "modem" and my PCs). I've been trying to use my Zyxel P660 as a modem only: Setup P660 to bridge mode. Changed WRT54GL's IP address to 192.168.2.1 to avoid a conflict on the network. Configured the PPPoE settings as required on WRT54GL. The thing is that when I connect the Zyxel modem/router on the WRT54GL's internet port the light doesn't turn on. I can confirm that this port has been working ok, so I'm not really sure what's going between the devices. I checked several settings such as IPs, tried disabling DHCP on Zyxel/Linksys, Firewall on both and still nothing. Also, I tried connecting Zyxel directly to a computer in bridge mode and dialed successfully. I have even posted a question here before, thinking that what I asked there was the only thing I needed to get things done. Unfortunately it wasn't, and the guy that solved his issue didn't give enough details in his post (and is quite unlikely to give more details since he was an anonymous user). For one, I don't know how to do this part: connected to the Zyxel through telnet and forced LAN port 1 to be at 100mb as well I can't find the option that does this on the zyxel router. Not through telnet or the web admin. Can anyone help me solve this?

    Read the article

  • Login box not shown on Ubuntu

    - by Alexandre
    I've installed Ubuntu 10.04 (64bit) as a guest OS in VirtualBox, using Windows7 Professional (64bit) as host. After Ubuntu install, I did installed Xfce4 (sudo apt-get install xfce4). Logged in using a Xfce session, and when I logged out, I couldn't see the login box anymore, only the regular gnome background from login screen. Then I restarted the virtual machine, and now I'm not able to see the login box anymore, only the gnome background. Does someone knows how to solve this? Thanks in advance Update: I've tried to use Xubuntu, that comes with Xfce. And I'm facing the same problem. As a common denominator from the two cases, now I see the problem arises after I've updated the system, and then installed curl (via apt-get), zlib (make process), git (make process). But I'm not sure this can be the cause for this ... Update: I isolated the problem. The bad guy is zlib, but I don't have a clue why. In fact, it does crash not only ubuntu and xubuntu, but also Debian (Yes, I've tested all). I'll keep this question in case someone have the same problem, but I think my initial question is not valid anymore.

    Read the article

  • SQL Server 2008 Unique Problem for bring DB Online...

    - by Nai
    This is my error I am facing TITLE: Microsoft.SqlServer.Smo Set offline failed for Database 'Go3D_Retailer ------------------------------ ADDITIONAL INFORMATION: An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo) Unable to open the physical file "E:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\ftrow_Go3D_catalog.ndf". Operating system error 2: "2(failed to retrieve text for this error. Reason: 15105)". Database 'Go3D_Retailer' cannot be opened due to inaccessible files or insufficient memory or disk space. See the SQL Server errorlog for details. ALTER DATABASE statement failed. (Microsoft SQL Server, Error: 5120) Background to this error I've been trying to move my destination logshipping database to another physical server for analysis purposes. Because I do not have active directory set up, I had to hack my process by using the same username/password for both the source and destination servers to get the process to work. Following that, I used this guy's solution to move the destination database to another server. However, this error occurs when I try to bring the database back online. I don't have an E drive on my server and I have no idea why it's trying to open a file from E drive. I have over a 100gb left on my hard disk so it's definitely not a space issue. This sounds like a bug... Any ideas? I'm running SQL Server 2008 Enterprise edition on Windows Server 2008 R2 64bit

    Read the article

  • Redhat 5.5: Multi-thread process only uses 1 CPU of the available 8

    - by Tonny
    Weird situation: Redhat Enterprise 5.5 (stock install, no updates, x64) on a HP z800 workstation. (Dual Xeon 2,2 Ghz. 8 cores, 16 if you count Hyper-threading. RH sees 16 cores.) We have an application that can utilize 1, 2 or 4 threads for heavy calculations. Somehow all these threads run on the same core at 100% load (the other 15 cores are nearly idle) so there is absolutely no benefit from the extra threads. In fact there is a slight slowdown as the threads get in each others way on the single core. How do I get them to run on separate cores (if possible)? Application is 64 bit. Can't change anything about the software except changing the threads setting. Is there some obscure Linux setting I can try to change? (I'm a True64 and Aix guy. I use Linux, but have no in depth knowledge of the process scheduling on Linux.)

    Read the article

  • Distributed development staff needing a common IP range

    - by bakasan
    I work on a development staff that is geographically distributed, mostly all throughout the state of CA, but several key members also must travel frequently. We rely quite heavily on a 3rd party provider API for a great deal of our subsystems (can't get into who it is or what they do). The 3rd party however is quite stringent on network access and have no notion of a development sandbox. Access is restricted to 2, 3 IP numbers and that's about it. Once we account for our production servers, that leaves us with an IP or two to spare for our dev team--which is still problematic as people's home IP changes, people travel, we have more than 2 devs, etc. Wide IP blocks are not permitted by the 3rd party. Nor will they allow dynamic DNS type services. There is no simple console to swap IPs on the fly either (e.g. if a dev's IP at home changes or they are on the road). As none of us are deep network experts, I'm wondering what our viable options are? Are there such things as 3rd party hosts to VPNs? Generally I think of a VPN as a mechanism to gain access to a home office, but the notion would be a 3rd party VPN that we'd all connect to and we'd register this as an IP origin w/ our 3rd party. We've considered using Amazon EC2 to effectively host a dev environment for each dev and using that to connect. Amazon only gives you so many static IPs however (I believe 5?) so this would only be a stop gap solution until our team size out strips our IP count at Amazon. Those were the only viable thoughts that I had, but again, I'm far from a networking guy. Tried searching for similar threads, but I'm not even sure I know the right vernacular to look around for.

    Read the article

  • WDS updating raid drivers in an already existing image WIM

    - by Tim
    Here is my current setup. WDS installed on Server 2008 R2 for the new driverstore and multicast features. A Windows Server 2003 32bit Standard image built to support previous DL360 models. A new HP DL360 G6 which has a new raid controller in it. I need to add the driver for the raid controller into my Server 2003 32bit standard install image but I can't seem to figure out the correct method to do so. So far I've tried the following: Mounting the image and placing the drivers into the Sysprep drivers folder, adding the PCI device codes into the sysprep.inf file and committing the changes to the image. Pushing the image to a DL360 G4, ensuring the driver is in the correct locations and re-sysprepping the image. Hoping that the new driverstore feature would magically work with 2003 (a guy can dream cant he?) Is there some standard method that I can use to update this image with the new drivers or do I need to start from scratch with an entirely new build? Thanks in advance.

    Read the article

  • Need a VM for running a PHP Sandbox

    - by Phani
    I am working on Web application honeypot. It collects PHP files it receives (as part of an RFI attack) and runs them in order to return the result back to the attacker. The aim is to coax the bad guy into going further into his attack. Based on the answers to my SO question, I am looking at using VMs for running the PHP Sandbox. The honeypot itself consists of Python code and will be running in a Linux environment (preferably Ubuntu-like). These are some of the requirements: The VM should be a light weight as possible. We are going to distribute the code around and many people are going to use the VM along with the Python based honeypot. So, the installation and configuration should not be too difficult. The guest system would also be Linux as we are going to distribute the VM image around. It should be possible for the Python code outside to talk to the guest system. It would be passing on the PHP file to the guest system and will get the output result from it. It should be possible to automate the initial configuration of the VM (such as allocation of RAM etc.) I would like to randomize these settings in order to make the sandbox less 'fingerprintable' I have looked at OpenVZ and KVM so far. Are there any other VMs that I might look at? What do you recommend?

    Read the article

  • Routing multiple static IPs from ISP at the cable modem?

    - by Jakobud
    I'm taking over IT responsibilities for a previous IT guy. We have a 50mb cable modem connection from Comcast along with 5 static IP addresses: XXX.XXX.XXX.180 XXX.XXX.XXX.181 XXX.XXX.XXX.182 XXX.XXX.XXX.183 XXX.XXX.XXX.184 We are in the process of replacing our firewall machine. Currently the firewall box is the only thing connected to the cable modem. However the cable modem has multiple ethernet ports on it, similarly to a router. I have assembled a new firewall machine and its time to start testing and configuring it. So that means that I also need it plugged into the cable modem (remember it has multiple ethernet ports on it). So now with multiple computer plugged into the cable modem, how does the cable modem know where to route the traffic? If some request on the internet is made to XXX.XXX.XXX.181, which goes to our cable modem, how does the cable modem know which connected computer that traffic is supposed to be sent? Looking at the web interface for the cable modem, there doesn't seem to be anything special setup on it with regards to routing or NATing IP addresses. Is that because when there is only one computer connected to the modem, all traffic is sent to it by default? Now that I am going to (temporarily) have multiple computers plugged into the cable modem, do I need to specify routing or NAT rules on the modem itself? I am going to speak to Comcast about this next, but I figured I'd ask here first just so I can get a better grasp on how this type of thing generally plays out.

    Read the article

  • Map a domain to another subdomain - Rackspace

    - by Gorgi Rankovski
    I am using a subdomain as a parameter to an ASP.NET MVC 4 application. It's working well. Now I need to test my approach, so I have the application hosted on appharbor. It works well with subdomains here too. Our DNS registers are on Rackspace, but I have no control over it. Another guy is responsible for that. So, myapp.apphb.com can be accessed through myapp.com. Also abc.myapp.com is working as expected. I use abc as a parameter. So, now I want abc.com to be mapped in those Rackspace DNS registers to abc.myapp.com Is this possible at all? Can you explain to us how to do that? Will I have some problems with it? Anything that I should be aware of? Please have in mind that I am newbie when it comes to DNS. And no experience with Rackspace. Thanks.

    Read the article

  • HP Procurve Issue Passing Multiple VLANs over a link

    - by MichaelRwat
    Just to start off with I am a Cisco guy that got placed into an HP project. Basic topology overview from outside in: ASA 5505 with two Ethernet connections to a 2910-24 port switch. This switch is then (Cisco Trunking) to a 2626 switch passing vlan (1 untagged and 100 tagged)between them. I created SVI's on each of the switches for both VLAN's for testing purposes. I can not get vlan 100 to pass across this link. I also have trunks configured to AP's off of the switch and can not ping the vlan 100 BVI on the AP's but can reach the vlan 1 BVI. Port 25 on Access layer (2626) connects (trunks) with port A1 of 2610. STP is not running at all on any switch (this is not my network I can't change this nor did I design this) Distribution Sw: MP1-0# show run ip default-gateway 10.100.100.100 vlan 1 name "DATA" untagged 1-22,24-A1,B1 ip address 10.100.100.6 255.255.255.0 no untagged 23 exit vlan 100 name "GUEST" untagged 23 tagged 24-A1 ip address 10.100.102.6 255.255.255.0 exit Access Sw: ip default-gateway 10.100.100.100 vlan 1 name "DEFAULT_VLAN" untagged 1-26 ip address 10.100.100.5 255.255.255.0 exit vlan 100 name "GUEST" ip address 10.100.102.5 255.255.255.0 tagged 15,25 exitt From the ASA I can ping the vlan 100 address of the 2610 but not the 2626 (10.100.102.6)[Not passing the "trunk"] If I plug into an access port vlan 100 of the 2626 I can ping the SVI for vlan 100 as intended. I can not ping across the "trunk" over vlan 100 but I can across vlan 1. There may be something obvious I'm missing but please review my configuration and thank you for the assistance.

    Read the article

  • 4.00gb (3.25gb usable) in Windows 7 x64

    - by dotnetdev
    Hi, I have setup Windows 7 Ultimate x64 on my PC. I have 4gb RAM and my BIOS states the correct amount (4096mb), but I cannot Windows (System Manager) says I have 4.00gb (3.25gb usable). This seems to be a popular issue, and I have looked for an integrated video card (integrated with my chipset) to disable but haven't found anything. What else can be preventing me from seeing all 4gb? When I had Vista 32bit, it would say 3.25gb RAM not 4.00gb (3.25gb usable). I have an x64 CPU and when I brought my RAM, I used a compatibility tool from Crucial (the memory vendor) to test how much memory my PC can support and 4gb was the answer (this was a windows app I think). Chipset is Intel(R) G33/G31/P35/P31 Express Chipset PCI Express In the bios, I looked for an onboard video card (integrated) and there was no such thing, but a couple of other onboard devices. There are also no "Resource Mappings" settings. FURHTER DETAILS: Chipset North Bridge: Intel Bearlake G33 South Bridge: Intel 82801IR ICH9R Maximum Memory Amount 8 GB Graphics Controller Type Intel GMA 3100 (Enabled) I guess the first thing is, how do I disable the graphics controller? EDIT: This thread (http://forums.legitreviews.com/about23417.html) indicates the issue is with memory mapped devices, but someone on this thread says that does not apply to x64. The rest of the comments points to a mobo issue for the guy who started that thread. Thanks

    Read the article

  • Windows 2003 Active Directory Integrated DNS zone not registering non-domain computers

    - by Jeff Willener
    I'm not a networking guy by all means, I'm just a developer who dabbles enough to get into trouble and I'm there. So bear with me... :) At my office I have a Windows 2003 Domain Controller which also services DNS. On the domain I have a handful of computers and other misc. equipment/toys. For the DNS I only created a Forward Lookup Zone for my domain (mydomain.com). I run a lot of VM's so generally I have everything on the domain, however some of those VM's are not and only in a 'Workgroup'. I also have another laptop which belongs to another domain (otherdomain.com) which is here 100% but I use it for other purposes and has to belong to the otherdomain.com. With all that said, I have two questions: I have found any computer not on mydomain.com does not register it's IP address even though 'Register this connections address in DNS' is set to in the 'Advanced TCP/IP Settings' for the nic. Where have I messed this up? On the laptop which is registered on otherdomain.com, when I do a nslookup for a computer on mydomain.com (e.g. nslookup devbox1) it appends otherdomain.com as the suffix (e.g. queries devbox1.otherdomain.com). Same thing occurs if I use the fully qualified name. In the 'Advanced TCP/IP Settings' for that nic, I can 'Append these DNS suffixes' of mydomain.com but I fear that will hose my DNS lookups when I VPN to otherdomain.com. So what is the correct approach to resolve this issue? Do I add both mydomain.com and otherdomain.com in that order?

    Read the article

  • OS/X 10.6 Bizarre login bug: Making alternative "Others..." appear. Why does this happen?

    - by bjornl
    I am studying at NUS in Singapore, and they have a mac-equipped computer lab here at school. All users (students) have our own personal accounts that we use to log in to the computers with. Sometimes when you approach a computer to log in only the alternative "thinkmac", which is the school's administrator account, I presume. Some other computers have the alternative "thinkmac" as well as "Others..." where you can input your own login credentials. One day as I sat down by a computer and there was only the "thinkmac" alternative. I was about to get up and find another one when the guy sitting next to me says - Just click 'thinkmac' - the computer will ask for your password - then hit escape to get back to the login screen. Repeat until "Others..." appear. So: If you click any user account, hit ESC to get taken back to the login screen, repeat for 5-10x, eventually the alternative "Others..." will appear. Why is this? Is there an internal counter that keeps track on how many times you have clicked a/any given user account, and after a certain threshold it displays the "Others"? What is the logical reasoning behind this?

    Read the article

  • Problem configuring php-fpm with nginx

    - by Nisanio
    First of all: I'm not an expert in configuring things. This is very new for me, so, my apologies in advance. At work we have a Centos server. The guy who worked here before installed nginx. We need to made a php site, so, obviously, I need to set up php and make it work with nginx. Making short a very long tale, I had to replace the nginx binary with a new one (because the older was compile without fast-cgi), and I had to recompile and install php (because the new version has fpm). Then I struggle with the config files, making this nginx.conf (not all the file) user php; location ~ \.php$ { fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /scripts$fastcgi_script_name; include fastcgi_params; } and uncomment some parameters in php-fpm (to much to detail here, but the important is that group and user are "php") I never could start the php-fpm with the instructions of the book sudo /usr/sbin/php-fpm start But after look at the net, I found this sudo /usr/local/sbin/php-fpm --fpm-config=/usr/local/etc/php-fpm.conf This worked (I think) I restarted nginx. But... nothings happens with php... My calls to php files (via firefox) doesn't even appear in the log (/opt/nginx/logs/error.log) I'm really, really exhausted and lost... Could anyone help me, pleaaase.... :( Thanks in advance

    Read the article

  • Acer Aspire one is falling apart on Ubuntu

    - by Narcolapser
    Question: How do I have my netbook detect and install hardware? Info: I have an Acer Aspire One, it came with windows XP and I loaded it with Win7. I decided I wanted to change to Ubuntu so I tried Ubuntu netbook remix, which failed horribly, and so after attempting 3 or so other OS's I ended with Ubuntu Desktop 9.10. Which worked fine for a while, but there were some minor issues so I asked a question about it here and decided to change my OS again. This last weekend I tried mandriva like that guy in my other question suggested, no success. when I had though my netbook lost the ability to use it's touch pad, I didn't think much of it, just thought it must be a driver or something. But When Mandriva failed, and I also while I was at it tried Damn small linux and Debian, which both failed to, I decided to switch back to Ubuntu Desktop(some where in here my keyboard stopped working for one attempt to). But first I gave the netbook remix one more try. it worked this time, with the exception of it didn't have any networking. I thought it was a driver issue again and finished the weekend with ubuntu desktop 9.10 again. But now things get really crazy. it doesn't know it has a wireless card or an ethernet card. It doesn't know my phone is connected trying to provide wireless broadband either. I'm clueless on what could be the problem. And with only a minimal amount of experience with Ubuntu can't navigate the entire interface with only my keyboard(it doesn't detect a USB mouse when I plug it in, it had when I installed it. in fact the network interfaces were working just fine when I live boot ubuntu to installed it). Even so, I don't know where to go or what to do to make it recognize it's hardware. I'm in a dire situation, any help is welcome.

    Read the article

  • How to configure TFTPD32 to ignore non PXE DHCP requests?

    - by Ingmar Hupp
    I want to give our Windows guy a way of easily PXE booting machines for deployment by plugging his laptop into one of our site networks. I've set up a TFTPD32 configuration which does just that, and our normal DHCP server ignores the PXE DHCP requests due to them having some magic flag, so this part works as desired. However I'm not sure how to configure TFTPD32 to only respond to PXE DHCP requests (the ones with the magic flag) and ignore all normal DHCP requests (so that the production machines don't get a non-routed address from the PXE server). How do I configured TFTPD32 to ignore these non-PXE DHCP requests? Or if it can't, is there another equally easy to use piece of software that he can run on his Windows laptop? Since the TFTPD part is working fine, a DHCP server with the ability to serve PXE only would do. Worst case I'll have to set up a virtual machine with all this, but I'd much prefer a small, simple solution. I'm not interested in solutions that involve using the existing DHCP servers or separating machines on the network for deployment, the whole point is to be simple and stand-alone.

    Read the article

< Previous Page | 46 47 48 49 50 51 52 53 54 55 56 57  | Next Page >