Search Results

Search found 1654 results on 67 pages for 'hack'.

Page 50/67 | < Previous Page | 46 47 48 49 50 51 52 53 54 55 56 57  | Next Page >

  • Hibernate between OS X and Bootcamp Win 7

    - by Willem
    Wouldn't it be great if someone wrote a guide or an app which allowed you to switch instantly between OS X and Windows using Hibernate in both OS:s? Windows 7 already has an option "Hibernate" which allows you to boot back to your OS X partition, but OS X does not exactly offer the same. However, there are possibilities here. It seems that the recent Mac's have 3 different kinds of sleeping mode: Sleep: Low power consumption, RAM still active. Legacy Safe Sleep: No power consumption(?), writes RAM to disk and shuts down (is this the same as Hibernate?) Safe Sleep: Writes RAM to disk and enters sleep mode. If battery level drops too low it goes into Hibernate (is this Hibernate the same as #2 in this list? This is the Hibernate I will be referring to int he rest of this post) It seems that I am unable to force my MacBook Pro (Late 2011) OS X 10.7.3 into a true hibernate using either command line or apps that are supposed to do this. I believe the Mac should show that white loading bar whilst waking up if it was truly put into hibernate (which it does not). But I can get this white bar to show by letting my battery level drop to 0% so there is obviously a system function for it (obviously, duh! :). When Win 7 goes into hibernate it shuts down completely and you can then boot into OS X on startup. On OS X however, hibernate forces you to wake up into OS X. Can you hack this so that you're allowed to select boot partition after OS X hibernates? Would it be possible to use the true hibernate system functionalities of Win 7 and OS X to create a kind of instant switching between the two? Imagine this on a quick SATA-3 SSD like my 180GB Intel 520. Thanks / Willem

    Read the article

  • Intermittently uncommunicative subnets

    - by mhd
    Last week proved me a veritable Cassandra: I've always said that it's a bad idea to have only one firewall/router, without a backup or failover. And thus our Cisco PIX went haywire, refusing to route properly. And of course, the only one available here on short notice is me, and while I'm quite grounded in Linux, I'm really a developer not a sysadmin (the fact that this hit me on sysadmin appreciation day is a bit ironic). Anyway, this weekend I tried to hack up a temporary solution: I used an old server with enough NICs (two built-in, four on a card) to serve as a gateway and firewall. Due to some problems with the raid controller, I got only two router distros running, and between Untangle and Ebox I decided for the latter. Now everything is quite okay. I've got all the different subnets we've got here (all with separate switches) talking to each other and even to the internet (Cisco 2800 router, T1 lines). But from time to time (20-60 minute intervals), I get a total routing failure. Our main, office subnet can't talk to our server subnet and can't connect to the internet. This is not the end of a gradual slowdown, either everything's working perfectly or I get a total lack of communication for about two minutes each time. Now I'm a bit at wits end what to check. At least with the default EBox setup, nothing in /var/log shows anything weird and it doesn't exactly have lots of built-in monitoring tools. So I'm hoping someone here could give me some pointers about what to look out for. I did change the ethernet cable from the office switch to the firewall, with no results. I might change switches, although within the switch it seems to work ok enough. Edit: I'm not sure whether this is the sole cause of the problem, but after I noticed a few DHCP entries just before the last drop of connectivity, I tried to reproduce that. And alas, whenever I renew a DHCP connection, I can't access other subnets anymore. Running ISC DHCPD 3.0.6.

    Read the article

  • Using Flot's Bar Graph in an Android WebView with Highlighting

    - by Nicholi
    The issue is unhighlighting bars which are no longer selected in a bar graph plotted by flot in a WebView on Android. Got no other issues drawing the actual graphs (which look beautiful for something so simple btw). I am not extremely knowledgeable in terms of javascript and web design/development but it seems little should have been needed, if it would just work!! :( I believe I'm following the Flot API correctly, if not someone please scream and yell at me. It seems to work just fine in a non-mobile browser at least. Hoping someone has done this before, but if not I've got the minimal necessary code to poke at your droids if inquiring minds would like to test. I've tested on two Nexus Ones (both 2.2.1), and have tried targeting with Andriod 1.5 and 2.2 SDKs (my intention is to target 1.5 if possible). I've been attempting to hack away at this for far too long on my own now. What happens: 1. Graph loads fine with bars. All bars unhighlighted. 2. Select a bar in graph, gets highlighted fine (and a tooltip is placed). 3. Select a different bar in graph, old bar is unhighlighted, old tooltip removed, new bar highlighted and tooltip placed (still no problems). 4. Click in the vast darkness of the graph which should then unhighlight the last bar... but it doesn't. I've tried disabling flot's autohighlight and manually doing it as well to no avail. Looking into flot itself and only getting down to drawOverlay() where the issue seems to begin... An even more disturbing bug(?) appears if the fill bar option is enabled in the graph, but I'd rather just forget about that for now. Also grabbed the latest version of flot from their svn (r290), but made no different from last public release (v0.6). As a complete guess I'm thinking it's an issue with WebKit's javascript implementation (or something specific to Nexus Ones, which wouldn't be so bad), but if there is any ugly hack to just get it to work I'm all ears. I've thrown the graph data directly into the html/js, rather than deal with showing all the code involved in the Java-javascript handler and callbacks. The simple html placed in 'assets/flot/test/' with jquery.js and jquery.flot.js: <!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd"> <html> <head> <meta http-equiv="Content-Type" content="text/html; charset=UTF-8"> <script src="jquery.js"></script> <script src="jquery.flot.js"></script> <script id="source" language="javascript" type="text/javascript"> var lastItem = null; var plot = null; $(document).ready(function () { //window.testhandler.loadGraph(); // bind plotclick here $("#graphHolder").bind("plotclick", function (event, pos, item) { if (item) { var lastPoint = null; if (lastItem != null) lastPoint = lastItem.datapoint; if (!pointEquals(lastPoint, item.datapoint)) { //if (lastItem != null) // plot.unhighlight(lastItem.series, lastItem.datapoint); lastItem = item; $("#tooltip").remove(); //plot.highlight(item.series, item.datapoint); showTooltip(item.pageX, item.pageY, item.datapoint[1]); } } else if (lastItem != null) { plot.unhighlight(lastItem.series, lastItem.datapoint); // not unhighlighting anything //plot.unhighlight(); // doesn't work either, supposed to unhighlight everything lastItem = null; $("#tooltip").remove(); } }); GotGraph(); }); /** * Show a tooltip above bar in graph * @param {int} x Left coordinate of div * @param {int} y Top coordinate of div * @param {String} contents text to place in div */ function showTooltip(x, y, contents) { $('<div id="tooltip">' + contents + '</div>').css( { position: 'absolute', display: 'none', top: y, left: x, border: '1px solid #fdd', padding: '2px', 'background-color': '#fee', opacity: 0.80 }).appendTo("body").fadeIn(200); } /** * Draw the graph. This is a callback which will be called by Java * * @param {Object} seriesData * @param {Object} seriesOptions */ function GotGraph() { //seriesData, seriesOptions) { var seriesData = [{ "bars":{"lineWidth":2,"show":true,"barWidth":86400000,"align":"center","fill":false}, "data":[[1288569600000,10],[1288656000000,5],[1288742400000,12],[1288828800000,20],[1288915200000,14],[1289001600000,3],[1289174400000,22],[1289260800000,20],[1289347200000,10],[1289433600000,5],[1289520000000,12],[1289606400000,20],[1289692800000,14],[1289779200000,35]]}]; var seriesOptions = { "xaxis":{"twelveHourClock":false,"minTickSize":[1,"day"],"tickSize":[1,"day"],"timeformat":"%d","mode":"time"}, "yaxis":{"min":0}, "grid":{"clickable":true,"autoHighlight":true,"hoverable":false}}; plot = $.plot($("#graphHolder"), seriesData, seriesOptions); } function pointEquals(point1, point2) { if (point1 != null && point2 != null && typeof(point1) == typeof(point2) && point1.length == point2.length) { var i; for (i=0;i<point1.length;i++) { if (point1[i] != point2[i]) { return false; } } return true; } return false; } </script> </head> <body> <div id="graphHolder" STYLE="height:200px;width:400px"></div> </body> </html> The minimal amount of code necessary in onCreate in startup activity: @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); WebView mytestView = new WebView(this); mytestView.setLayoutParams(new LayoutParams(LayoutParams.FILL_PARENT, LayoutParams.FILL_PARENT)); setContentView(mytestView); mytestView.setBackgroundColor(0); mytestView.getSettings().setJavaScriptEnabled(true); mytestView.setClickable(true); mytestView.setFocusable(false); mytestView.setFocusableInTouchMode(false); mytestView.loadUrl("file:///android_asset/flot/test/stats_graph.html"); }

    Read the article

  • Postgres pgpass windows - not working

    - by Scott
    DB: Postgres 9.0 Client: Windows 7 Server Windows 2008, 64bit I'm trying to connect remotely to a postgres instance for purposes of performing a pg_dump to my local machine. Everything works from my client machine, except that I need to provide a password at the password prompt, and I'd ultimately like to batch this with a script. I've followed the instructions here: http://www.postgresql.org/docs/current/static/libpq-pgpass.html but it's not working. To recap, I've created a file on the client (and tried the server as well): C:/Users/postgres/AppData/postgresql/pgpass.conf, where postgresql is the db user. The file has one line with the following data: *:5432:*postgres:[mypassword] (also tried explicit ip/dbname values, all asterisks, and every combination in between. (I've also tried replacing each '*' with [localhost|myip] and [mydatabasename] respectively. From my client machine, I connect using: pg_dump -h [myip] -U postgres -w [mydbname] [mylocaldumpfile] I'm presuming that I need to provide the '-w' switch in order to ignore password prompt, at which point it should look in the AppData directory on the server. It just comes back with "connection to database failed: fe_sendauth: no password supplied. Any insights are appreciated. As a hack workaround, if there was a way I could tell the windows batch file on my client machine to inject the password at the postgres prompt, that would work as well. Thanks.

    Read the article

  • Anonymous Login attemps from IPs all over Asia, how do I stop them from being able to do this?

    - by Ryan
    We had a successful hack attempt from Russia and one of our servers was used as a staging ground for further attacks, actually somehow they managed to get access to a Windows account called 'services'. I took that server offline as it was our SMTP server and no longer need it (3rd party system in place now). Now some of our other servers are having these ANONYMOUS LOGIN attempts in the Event Viewer that have IP addresses coming from China, Romania, Italy (I guess there's some Europe in there too)... I don't know what these people want but they just keep hitting the server. How can I prevent this? I don't want our servers compromised again, last time our host took our entire hardware node off of the network because it was attacking other systems, causing our services to go down which is really bad. How can I prevent these strange IP addresses from trying to access my servers? They are Windows Server 2003 R2 Enterprise 'containers' (virtual machines) running on a Parallels Virtuozzo HW node, if that makes a difference. I can configure each machine individually as if it were it's own server of course... UPDATE: New login attempts still happening, now these ones are tracing back to Ukraine... WTF.. here is the Event: Successful Network Logon: User Name: Domain: Logon ID: (0x0,0xB4FEB30C) Logon Type: 3 Logon Process: NtLmSsp Authentication Package: NTLM Workstation Name: REANIMAT-328817 Logon GUID: - Caller User Name: - Caller Domain: - Caller Logon ID: - Caller Process ID: - Transited Services: - Source Network Address: 94.179.189.117 Source Port: 0 For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Here is one from France I found too: Event Type: Success Audit Event Source: Security Event Category: Logon/Logoff Event ID: 540 Date: 1/20/2011 Time: 11:09:50 AM User: NT AUTHORITY\ANONYMOUS LOGON Computer: QA Description: Successful Network Logon: User Name: Domain: Logon ID: (0x0,0xB35D8539) Logon Type: 3 Logon Process: NtLmSsp Authentication Package: NTLM Workstation Name: COMPUTER Logon GUID: - Caller User Name: - Caller Domain: - Caller Logon ID: - Caller Process ID: - Transited Services: - Source Network Address: 82.238.39.154 Source Port: 0 For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

    Read the article

  • Caching/preloading files on Linux into RAM

    - by Andrioid
    I have a rather old server that has 4GB of RAM and it is pretty much serving the same files all day, but it is doing so from the hard drive while 3GBs of RAM are "free". Anyone who has ever tried running a ram-drive can witness that It's awesome in terms of speed. The memory usage of this system is usually never higher than 1GB/4GB so I want to know if there is a way to use that extra memory for something good. Is it possible to tell the filesystem to always serve certain files out of RAM? Are there any other methods I can use to improve file reading capabilities by use of RAM? More specifically, I am not looking for a 'hack' here. I want file system calls to serve the files from RAM without needing to create a ram-drive and copy the files there manually. Or at least a script that does this for me. Possible applications here are: Web servers with static files that get read alot Application servers with large libraries Desktop computers with too much RAM Any ideas? Edit: Found this very informative: The Linux Page Cache and pdflush As Zan pointed out, the memory isn't actually free. What I mean is that it's not being used by applications and I want to control what should be cached in memory.

    Read the article

  • Converting Audio To Video Output and Attaching Text?

    - by ZeeMan
    I am currently working on a project and before i get started i thought it'd be nice to check with stackOverflow community, and see maybe they can help me with this. The Idea: I have about a thousand MP3 files that i need to convert into Video files to be upload on Youtube for my work. Here is where it gets tricky i need to also attach the Text associated with the Audio to the Video as an Image. I was thinking .ppt. The Problem: I can do this one audio file at a time but it would take me a zillion years. lol!! The Question: Can I Create Some Kind Of Program Using Let's Say XML or JavaScript Or XHTML or some other programming language to do a MASS content creation and all i have to do is feed it the Information?? possibly a script?? or is it possible to create an example .ppt file and then hack it so that i can have it reproduce itself with different information?? The Note: Thanks U In Advance For Helping Out!!! Regards, ZeeMan!!!

    Read the article

  • 7zip many files from different folders?

    - by mafutrct
    I would like to add a large number of files with different names from different folders to a single 7zip archive using 7za.exe. This should be simple, but it turned out to be a major pain. I created a file that contains the paths (7za -a @list.txt) but once there are too many (~100) files, it fails. Apparently the content of the argument file is pushed onto the command line buffer, which is far too small (the number of files to add is 1m). Splitting the process up by adding the files one by one is not feasible due to the way 7za works: When adding the next file, it creates a copy of the archive, adds the file to the copy and finally replaces the original. This is terribly slow once the archive gets to a couple 100MB in size. So far I am using a combination of the two approaches by adding a dozen files each time in a loop, but it is an unreliable hack and still very slow. Is there a better way to do it? I tried to use 7zip wrapper DLLs (I'm a C# programmer), but none of them worked reliably and I was repeatedly suggested to just use 7za instead.

    Read the article

  • Create an axpanding image with CSS and div or span

    - by user1594895
    I have a complex image cutted up in alot of slice. You can see http://jsfiddle.net/yefQR/ <!--Force IE6 into quirks mode with this comment tag--> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" lang="en" xml:lang="en"> <head> <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" /> <title>Page Title</title> <style type="text/css"> body{ margin: 0; padding: 0; border: 0; overflow: hidden; height: 100%; max-height: 100%; } #framecontentTop, #framecontentBottom{ position: absolute; top: 0; left: 0; width: 100%; height: 130px; /*Height of top frame div*/ overflow: hidden; /*Disable scrollbars. Set to "scroll" to enable*/ background-color: navy; color: white; } #framecontentBottom{ top: auto; bottom: 0; height: 110px; /*Height of bottom frame div*/ overflow: hidden; /*Disable scrollbars. Set to "scroll" to enable*/ background-color: navy; color: white; } #maincontent{ position: fixed; top: 130px; /*Set top value to HeightOfTopFrameDiv*/ left: 0; right: 0; bottom: 110px; /*Set bottom value to HeightOfBottomFrameDiv*/ overflow: auto; background: #fff; } .innertube{ margin: 15px; /*Margins for inner DIV inside each DIV (to provide padding)*/ } * html body{ /*IE6 hack*/ padding: 130px 0 110px 0; /*Set value to (HeightOfTopFrameDiv 0 HeightOfBottomFrameDiv 0)*/ } * html #maincontent{ /*IE6 hack*/ height: 100%; width: 100%; } </style> </head> <body> <div id="framecontentTop"> <div class="innertube"> <div id="screenshot%20tsam%20900r2c2" style=" background-color: green;position:absolute; left:4px; top:6px; width:20px; height:68px; z-index:1; visibility:visible; "> </div> <div id="screenshot%20tsam%20900r2c3" style="background-color: yellow; position:absolute; left:24px; top:6px;width:47px; height:68px;z-index:2; visibility:visible;"></div> <div id="screenshot%20tsam%20900r2c4" style="background-color: red; position:absolute; left:71px; top:6px;width:165px; height:68px;z-index:3; visibility:visible;"></div> <div id="screenshot%20tsam%20900r2c5" style="background-color: black; position:absolute; left:236px; top:6px;width:62px; height:68px;z-index:4; visibility:visible;"></div> <div id="screenshot%20tsam%20900r2c6" style="background-color: pink; position:absolute; left:298px; top:6px;width:147px; height:68px;z-index:5; visibility:visible;"></div> <div id="screenshot%20tsam%20900r2c7" style="background-color: orange; position:absolute; left:445px; top:6px;width:311px; height:37px;z-index:6; visibility:visible;"></div> <div id="screenshot%20tsam%20900r2c9" style="background-color: cyan; position:absolute; left:756px; top:6px;width:108px; height:37px;z-index:7; visibility:visible;"></div> <div id="screenshot%20tsam%20900r2c11" style="background-color: white; position:absolute; left:864px; top:6px;width:27px; height:37px;z-index:8; visibility:visible;"></div> <div id="screenshot%20tsam%20900r3c7" style="background-color: DodgerBlue; position:absolute; left:445px; top:43px;width:8px; height:31px;z-index:9; visibility:visible;"></div> <div id="screenshot%20tsam%20900r3c8" style="background-color: Gold; position:absolute; left:453px; top:43px;width:355px; height:31px;z-index:10; visibility:visible;"></div> <div id="screenshot%20tsam%20900r3c10" style="background-color: LightCyan ; position:absolute; left:808px; top:43px;width:83px; height:31px;z-index:11; visibility:visible;"></div> </div> </div> <div id="framecontentBottom"> <div class="innertube"> <h3>Sample text here</h3> </div> </div> <div id="maincontent"> <div class="innertube"> <h1>Lorem</h1> <p> Lorem ipsum </p> <p style="text-align: center">Vestibulum </p> </div> </div> </body> </html> Id like to make : 1) the header image autoexpanding using the repeated-y css property of DodgerBlue color and Orange div because thy are the only 2 part of image axpandible. 2) Is it possible to define a minimum size of header, and is possible to make the entire body minimum size based that size so the browser cant get smaller an if the window get smaller, scrollbar is show.

    Read the article

  • Disable internal display on Macbook Pro without closed lid mode?

    - by jslaker
    I have an early 2007 Macbook Pro running 10.5 that I've recently set up on a KVM with my primary desktop system. The problem I've run into is that I have a 20" 1680x1050 LCD, and OS X only provides options to mirror at the resolution of the built-in display or to span. Since the built-in display runs at 1440x900, this leads to running my LCD at non-native res and a fuzzy picture. There isn't any option that I can find to simply disable the built-in display entirely and run the external LCD at its native resolution. I am aware of closed lid mode, but the MBP was disassembled while in storage for about 6 months (took it apart to pull the HDD) and the cable to the touchpad, which controls the sleep sensor was damaged, meaning closed lid mode won't work. I've looked into replacing the cable, but the cheapest I've been able to find it is $75-100, and I'm trying not to invest any more money into this computer as it also has a completely dead battery and a few other minor problems. I've found the app SwitchResX which appears to allow you to do what I need, but it has a lot of functionality I don't need and a ~$20 registration charge attached to it. An odd set of circumstances, I'm aware, but I was hoping somebody might know of an OS hack that would let me just disable the internal display and be done with it. :)

    Read the article

  • Migrating from one linux install to another: How to keep the second disk around?

    - by Jim Miller
    I've got a linux box running Fedora 19 that I want to move to CentOS 6.4. Rather than trying to do something fancy with the current disk (which has also accumulated a lot of sludge over the years), I'm going to get a new disk, put CentOS on that, and then move the to-be-preserved bits of stuff from the old disk to the new one. I haven't done this yet, but I presume it should be semi-straightforward -- do the CentOS install on the new disk, mount the old disk on /olddisk or somesuch, and start copying. However, I'm not sure how to handle getting the machine to recognize the new empty disk as the target of the CentOS install (I suppose I can just pull the old disk during the installation), remember that this is the intended boot disk once the install has happened), and tweak /etc/fstab (right?) to set up the old disk on the desired mount point. (Both disks are, or will be, SATA.) I could probably hack it together without losing too much hair or doing too much damage, but could anyone offer some advice that would get/keep me on the right track? Thanks!

    Read the article

  • Problem creating ODBC connection to SQL Server 2008 with Vista

    - by earlz
    Well, I'm trying to get a database schema thing working, first I tried just doing it in Linux where I'm more comfortable, but ODBC seems to be a hack there and I couldn't get it to work. So I figured it shouldn't be too hard in Windows.. Ok, so I created a SQL Server Client Alias so that I can simply same windowsserver to refer to my SQL server. Then, I went to the ODBC configuration in Control Panel. I clicked Add in the User DSN section. I chose Native SQL Server (10), and then clicked next. Then I typed a short name and a description and gave the servername as windowsserver/SQLEXPRESS Then, I click next, give it my user name and password and click next. Then, after like 2 minutes it says "Login Timeout Expired" What can be wrong here? I know the server is configured cause I have SQL Server Management Studio opened up with that server in it. I'm also just trying to connect over regular TCP/IP and my firewall is disabled.

    Read the article

  • Simple, centralized user management on a small LAN - NIS or LDAP?

    - by einpoklum
    I'm setting up a small LAN for my team. It will, for all intents and purposes, not be connected to any external networks. I would it to have centralized control of user accounts (at least, I think I'd like that; I'm also considering using puppet, so theoretically I could just push /etc/passwd changes, or something). The number of machines is fixed, but not very small. Mostly they're 'attached' to a single user, but sometimes people work remotely on someone else's box; and there are a couple of servers. I've read this question, but my scenario is much simpler (even simpler than in this question) and I'd like to do something (relatively) quick, with not much hassle, but not a dirty totally-insecure hack. Is NIS relevant for my scenario? If not, what's the most hassle-free way to set up LDAP (or LDAP+Kerberos) to achieve the same? Notes: I have no experience with setting up either NIS or LDAP. We use Debian-flavored Linux distributions, mainly Kubuntu 12.04 (not my choice, but that's the way it is).

    Read the article

  • 7-Zip many files from different folders?

    - by mafutrct
    I would like to add a large number of files with different names from different folders to a single 7-Zip archive using 7za.exe. This should be simple, but it turned out to be a major pain. I created a file that contains the paths (7za a out.7z @list.txt), but once there are too many (~100) files, it fails. Apparently the content of the argument file is pushed onto the command line buffer [Edit: This was likely a misinformation on my part, either way it was not the reason], which is far too small (the number of files to add is more than one million). Splitting the process up by adding the files one by one is not feasible due to the way 7za works: When adding the next file, it creates a copy of the archive, adds the file to the copy and finally replaces the original. This is terribly slow once the archive gets to a couple 100 MB in size. So far I am using a combination of the two approaches by adding a dozen files each time in a loop, but it is an unreliable hack and still very slow. Is there a better way to do it? I tried to use 7-Zip wrapper DLLs (I'm a C# programmer), but none of them worked reliably and I was repeatedly suggested to just use 7za instead.

    Read the article

  • Formatting pwd/ls for use with scp

    - by eumiro
    I have two terminal windows with bash. One is local on the client computer, another one has an SSH-session on the server. On the server, I am in a directory and seeing a file I would like to copy to my client using scp from the client. On the server I see: user@server:/path$ ls filename filename I can now type scp in the client shell, select and copy the user@server:/path from the server shell and paste to the client shell, then type slash and copy and paste the filename and append a dot to get: user@client:~$ scp user@server:/path/filename . to scp a file from the server to the client. Now I am searching for a command on the server, that would work like this: user@server:/path$ special_ls filename user@server:/path/filename which would give me the complete scp-ready string to copy&paste to the client shell. Something in the form echo $USER@$HOSTNAME:${pwd}/$filename working with relative/absolute paths. Is there any such command/switch combination or do I have to hack it myself? Thank you very much.

    Read the article

  • Mail-Merge on Steroids: Can Word 2003 do this?

    - by richardtallent
    I have a huge report to put together, made up of over 1,000 smaller, nearly-identical reports. Each report includes: General 1:1 information (basic mail-merge stuff) Lots of text, some of which may need to be disabled or have alternate text based on a boolean field. A few embedded images, preferably loaded via HTTP URL, but if they have to be on the a file system thing I can do that. (Filenames will be provided as a field in the data source.) Fortunately, all images are roughly the same size/shape. Several 1:m tables with a few fields apiece. The kicker is the master/child tables. I've seen examples for Word 2000 for doing this by left-joining the master and child table and using some IF/THEN logic to know whether to jump to the next master record. But in my case, I have several of these subtables, so that approach won't really work. So, can Word 2003 handle arbitrary master/child tables? If so, how? If not, I considered InfoPath, but I haven't used it before, and it seems to be made for data entry, not long formatted reports. I'm a software developer, so I could always hack something together with a massive VBA macro, or generating the report in HTML on the web server (where the data is coming from anyway). But I'm hoping Word will work without such gymnastics, since it will give the ultimate users of the report template better control over formatting and making minor changes.

    Read the article

  • How to disable monitor auto detection in Windows 7?

    - by Jay Yother
    I am currently running Windows 7 Ultimate 64-bit with a dual monitor setup with an NVIDIA 7950 GT graphics card. One monitor is dedicated to this machine and the other monitor is connected to a DVI KVM switch. When I switch to my other computer, Windows 7 disables the monitor. However, when I switch back it does not re-enable the monitor. The only circumstance that automatically re-enables the second monitor is when I switch back after Windows has put the monitors into power save mode. I am continually having to bring up the NVIDIA control panel to have it re-enable the monitor. Under Windows XP I would just disable the NVIDIA service to prevent it from auto-detecting the monitor (which doesn't solve the problem under Win7), and in Vista there was a registry hack that would prevent this. It looks as though that has been removed in Windows 7. I have found similar questions posted on this site, but nothing that matches my problem exactly. The following link is the question that comes the closest, but does not provide a solution to the problem. http://superuser.com/questions/96683/how-to-fix-monitor-detection-on-windows-7 Is there a way in Windows 7 to disable monitor auto-detection? Update: I just added a second graphics card to my Windows 7 64-bit machine. I plugged one monitor into each graphics card. Now, when I use the KVM switch to switch back and forth it will re-enable the second monitor like it should. There are however, a few quirks with this. If I have a program maximized on the second monitor and it has focus, when I switch it will move to monitor 1. If I have a program maximized on the second monitor and it does not have focus, when I switch it will behave like it is minimized and when I bring it back up it will show up maximized on monitor 1. Definitely better than it was, but still looking for a way to disable the auto-detection.

    Read the article

  • Windows VPN client connect on different port

    - by John Gardeniers
    Scenario: Two Windows Server 2003 machines running RRAS VPNs. The firewall port forwards 1723 to one of those machines for normal remote access. I'd like to find a way to connect to the second machine as well. Not because I need to but just because it's the sort of thing I reckon should be possible but can't figure out how to do. Is it possible to have the Windows PPTP VPN client (on XP in this instance) connect on a port other than 1723? If so, I can simply port forward another port to the second server. I've done a fair bit of Googling over the last few days and have only found others asking the same question but no answers. I have of course tried to add a port number in the host name or IP connection box, in various formats, but to no avail. While this might be possible with a third part client I'm really only interested in whether or not it can be done with the Windows built-in client and if so how?. Perhaps there's a registry hack I'm not aware of?

    Read the article

  • RSS "Newspaper" / Google Reader replacement

    - by Sean D
    With the impending demise of Google Reader I've been looking at ways to replace it. I've decided that what might be cool is to get an email every morning, with all the updates from the last twenty-four hours, maybe in the style of a newspaper. That's not a very original idea, since sites like http://fivefilters.org/pdf-newspaper/ and http://feedjournal.com/ already do this, but they both have various drawbacks. In particular both require a single feed, will just take the last n items, and clicking around on their website. The Pro option for feedjournal seems almost like it would do the job, but the project seems to be dead, and there's no way to buy it. Before I hack together something crazy I'd like to know if there's a better solution to my problem. In short: I want to replace Google Reader with a daily pdf email, how should I do this? edit: I didn't award the bounty because nobody solved the problem (not that I'm assuming it has a solution). Answers like "well for the way I do things this wouldn't work" aren't actually helpful, even if they are well-meaning.

    Read the article

  • How to troubleshoot this memory usage?

    - by Camran
    I have a classifieds website. I use PHP, MySql, and SOLR. Solr uses a Servlet Container, in my case JETTY, which is java application. I just noticed that something was terribly wrong on my website. I opened the terminal and entered the "top" command and noticed that JAVA was EATING all the cpu and mem. Now I thought "Ok, maybe I need more mem and cpu" So I increased it. But along with the increase the java app started eating more. This has never happened before, and it is either a bug, or a hack of some kind. Anyways, I need to troubleshoot this now, and so I wonder how do I do this? Can I somehow pinpoint exactly when the memory usage started to go up from some error log? How does one troubleshoot this? How do I prevent it? Is it possible to prevent too many requests somehow, if they are within a timeline? Thanks

    Read the article

  • How expensive is a hostname in htaccess? Other solutions possible?

    - by Nanne
    For easy allow or disallowing of dynamic IP-adresses you can add them as a hostname in a .htaccess file. As I have read from: .htaccess allow from hostname? it does a reverse lookup on the connecting ip address, seeing if the response matches the allowed name. (Well, actually Apache is doing a double lookup, first a reverse lookup and then a forward lookup on the result of the reverse.) This is the reason we are currently not using dynamic-ip hostnames in the .htaccess: this "sounds" quite heavy: 2 extra lookups for every request. Is this indeed quite heavy, and would a reasonably busy server that is rather looking for less then more load get away with this :)? (e.g.: how does this 'load' compare to the rest? If a request is 1000 times more expensive then the lookups it might be negligible. otoh, it could be that final straw :) ) Are there other solutions? I can write a script that does a lookup of the hostname and put it in .htaccess files ofcourse, but this feels a bit like a hack.

    Read the article

  • What happened to 'Copy Public Gallery Link' for folders in Photos in Dropbox?

    - by Transgenic
    I've been trying to figure out how to use the 'Photos' folder properly, but it does not seem to contain the functionality that is mentioned on various websites. From what I've read, you are supposed to create a folder within the 'Photos' folder. At that point, it becomes a public gallery for which you can access the context menu item Copy Public Gallery Link. However, I do not have this context menu item. I found a topic on the DropBox forum, but it is 2 years old. Even the various website information mentioned is over a year old. I found a topic from this year on SuperUser that mentions about the Share link menu item. I understand that this functionality is basically the same as Copy Public Gallery Link, however, the key difference is that it opens the website for which I need to click 'Copy link to this page' link, which then adds it to the clipboard. My primary questions are: Did they phase out the Copy Public Gallery Link from the context menu entirely? If not, is there a way to re-enable this menu item? If not, am I using the Photos folder properly? Lastly, if there is no way to get this menu item, is there some kind of script or hack-around that will let me simplify the Shark link + Copy link to this page functionality without requiring it to open my web browser? Note: I had to edit my post to remove other website links that I mention since I'm considered a 'New User' here and am only able to post 2 hyperlinks. Sorry.

    Read the article

  • php mail() function painfully slow on local development machine

    - by Michael B
    Background: If you have set up a local apache server for development purposes you may have run into the problem where sendmail takes a long time (at least one minute) to send emails. This is extremely frustrating if you are trying to debug a problem with an email you have generated. There are several forum posts on the internet that discuss this problem. However, none of theme described what to do in enough detail for my limited knowledge. Here are the steps that worked for me: 1) find your hostname (in case you've forgotten it) using this command: :~$ cat /hosts/hostname myhostname 2) edit the file /etc/hosts and make sure the first line is the following: 127.0.0.1 localhost.localdomain localhost myhostname 3) edit the sendmail configuration file ( /etc/mail/sendmail.cf in Ubuntu) and Uncomment the line #O HostsFile=/etc/hosts 4) Restart the computer. The computer should boot up much faster now and the mail() function should return almost immediately. HOWEVER, the emails won't actually be sent unless you follow step 5. 5) You must new use the sendmail '-f' option whenever using the mail function. For example: mail('[email protected]', 'the subject', 'the message', null, '[email protected]'); My question for my fellow serverfaulters is: What further changes can be made so that I don't have to use the sendmail -f option? Although it's not very hard to add the -f option, it is a problem when your CMS (such as Drupal) does not use the -f option when sending mail. You would need to hack a core module to add this option.

    Read the article

  • Duplicate monitor on highest resolution in Windows 7

    - by AlexanderMP
    I have a monitor with a native resolution of 2560x1440, connected through display port. I also have an AV Receiver connected to the video card via HDMI, to have surround sound in games. All using Radeon HD 5670 (will upgrade soon to HD 7850). The problem is that my computer detects the receiver as a separate monitor, with the highest available resolution of 1920x1080. I have 3 options: Disconnect the second display. But then the sound (digital audio output through video card) also disappears. Duplicate displays. But then my primary monitor resolution is reduced to a maximum of just 1920x1080, that being the maximum of the second monitor. Extend desktop. This is the solution I picked so far, it being the least evil. The problems I face in this situations are 2: I have a blank part of the desktop where I sometimes lose my mouse pointer, so I made the extension small, 640x480, and placed it in a corner; when I turn off the main display, all windows resize to 640x480. In Kubuntu I had the option to duplicate the displays, while keeping the higher resolution. Which was great. I tried overriding using the Win7 netbook hack, but it's not available on non-netbooks. Is there a similar solution for this problem in Windows 7?

    Read the article

  • How To Disable Control Panel in Windows 7

    - by Mysticgeek
    If you have a shared computer that your family and friends can access, you might not want them to mess around in the Control Panel, and luckily with a simple tweak you can disable it. Disable Control Panel with Group Policy Note: This process uses Local Group Policy Editor which is not available in Home versions of Windows 7. Skip down below for the registry hack version that works on Home editions as well. First type gpedit.msc into the Search box in the Start menu and hit Enter. When Local Group Policy Editor opens, navigate to User Configuration \ Administrative Templates then select Control Panel in the left Column. In the right column double-click on Prohibit access to the Control Panel. In the next window, select Enable, click OK, then close out of Local Group Policy Editor. After the Control Panel is disabled, you’ll notice it’s no longer listed in the Start Menu. If the user tries to type Control Panel into the Search box in the Start menu, they will get the following message indicating it’s restricted. Disable Control Panel with a Registry Tweak You can also tweak the Registry to disable Control Panel. This will work with all versions of Windows 7, Vista, and XP. Making changes in the Registry is not recommended for beginners and you should create a Restore Point, or backup the Registry before making any changes. Type regedit into the Search box in the Start menu and hit Enter. In Registry Editor navigate to HKEY_CURRENT_USER\Software\Microsoft\Windows\Current Version\Policies\Explorer. Then right-click in the right pane and create a new DWORD (32-bit) Value. Name the value NoControlPanel. Then right-click on the new Value and click Modify…   In the Value data field change the value to “1” then click OK. Close out of Registry Editor and restart the machine to complete the process. When you get back from reboot, you’ll notice Control Panel is no longer listed in the Start menu. If a user tries to access it by typing Control Panel into the Search box in the Start menu… They will get the following message indicating it is restricted, just like if you were to disable it via Group Policy. If you want to re-enable the Control Panel, go back into the Registry and change the NoControlPanel value back to “0” then reboot the computer. This comes in handy if you have inexperienced users working on your machine and don’t want them messing with Control Panel settings. Similar Articles Productive Geek Tips Disable User Account Control (UAC) the Easy Way on Win 7 or VistaStill Useful in Vista: Startup Control PanelRestore Missing Items in Windows Vista Control PanelHow To Manage Action Center in Windows 7New Vista Syntax for Opening Control Panel Items from the Command-line TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Home Networks – How do they look like & the problems they cause Check Your IMAP Mail Offline In Thunderbird Follow Finder Finds You Twitter Users To Follow Combine MP3 Files Easily QuicklyCode Provides Cheatsheets & Other Programming Stuff Download Free MP3s from Amazon

    Read the article

< Previous Page | 46 47 48 49 50 51 52 53 54 55 56 57  | Next Page >