Search Results

Search found 18311 results on 733 pages for 'input director'.

Page 50/733 | < Previous Page | 46 47 48 49 50 51 52 53 54 55 56 57  | Next Page >

  • Brand New MOnitor Won't Get Input From CPU

    - by HollerTrain
    I have an old Dell 2350. I found a HD a few months ago and plugged it in and it booted up. So I just purchased a monitor and plugged it in, and put the HD inside and connected the two connections (Bus, and a four pronged connector) and no signal is being sent to monitor. is this a monitor issue or the HD is just dead? HD is spinning. CPU is turned on :) Yet no signal.. any thoughts?

    Read the article

  • Simulate analogue steering wheel input from third party software like xPadder

    - by David Jensen
    So. I currently have a steering wheel connected to my htpc. Since it wont work / get recognized by all games i play. I use xpadder to play for example Grid 3. As far as i have understood, it simply presses the associated arrow key when i turn the wheel. What i would like, is a software to simulate more and more frequent key presses of the arrow keys the more i turn the wheel. Example: Tilting a little - 100 presses / second Tilting more - 200 presses / second Tilting max - Hold down key Because what i currently do with the wheel is constantly shaking it a bit right, when i just want to turn a little bit right and so on. Os : W8

    Read the article

  • FFmpeg overlay two videos, one input with transparency

    - by Gian B.
    I am trying to create a karaoke from a CD+G file (converted to AVI using FFmpeg) and add a video as a background of the lyrics. Here's a screenshot of a the output from CD+G conversion, for simplicity let's call this lyrics.avi http://imgur.com/wUwHUhV Now a have this video.mp4 file that I'd like to put behind this lyrics.avi Here's a sample of what I'm trying to achieve http://imgur.com/8GuWXtQ I'm sure most of you are familiar with karaoke. I haven't used FFmpeg much and I'm not really sure if what I want to achieve is possible with FFmpeg. Is it possible to overlay two videos, and add a transparency to one of the videos? In this case the colour black? How can I set the offset time of the lyrics.avi? Here's the command the I've tried so far: ffmpeg -i video.mp4 -i lyrics.avi -filter_complex "nullsrc=size=854x480 [base]; [0:v] setpts=PTS-STARTPTS, scale=854x480 [upperleft]; [1:v] setpts=PTS-STARTPTS, scale=854x200 [bottomleft]; [base][upperleft] overlay=shortest=1 [tmp1]; [tmp1][bottomleft] overlay=shortest=1:y=280" -c:v libx264 -y karaoke.mp4

    Read the article

  • Nxlog Multiline Input to 1 Syslog Message

    - by Eric
    I am using nxlog to tail a custom log file on one of my Windows servers. Each entry in the text file looks similar to this. =================================================================================================================== 1/14/2014 3:08:48 PM DOMAIN\user1 adding group member... Domain: blah Group: TestGroup Member: CN=Joe Bob,CN=Users,DC=blah,DC=ARG,DC=com 1/14/2014 3:08:48 PM 1 member added.<br> ================================================================================================ I'm trying to send this log to my syslog server and I want to combine these multiple lines to 1 line so I can easily grep/search for specific users or groups. I've read some of the documentation on nxlog's website regarding multiline but haven't found a specific config to put them all in 1 entry with a syslog header. Thanks, Eric

    Read the article

  • Brand New Monitor Won't Get Input From Computer

    - by HollerTrain
    I have an old Dell 2350. I found a HD a few months ago and plugged it in and it booted up. So I just purchased a monitor and plugged it in, and put the HD inside and connected the two connections (Bus, and a four pronged connector) and no signal is being sent to monitor. is this a monitor issue or the HD is just dead? HD is spinning. CPU is turned on :) Yet no signal.. any thoughts?

    Read the article

  • Software for capturing still image snapshots from video input

    - by cantabilesoftware
    What software is available that will let me watch video from a USB video capture device at full PAL/NTSC resolution and capture a still image at a button press? More info: I'm using a KaiserBaas USB capture device (http://www.kaiserbaas.com/kaiser-baas-product-page/converters/video-to-dvd-maker), and want to capture screen shots from a PS2 connected to it. I'd like to play the game at the full PS2 resolution and capture certain scenes. The device has a one-touch snapshot button on it, but I can't seem to make it work and there's no mention of it anywhere in the documentation. The device works and the video appears in Power Producer (the included software), but I think it previews it smaller than the full resolution. I could print screen it, but having to crop will be a pain.

    Read the article

  • Recording with audio input MacBook Air

    - by Milla Well
    I'm trying to record analogue stereo sound with my MacBookAir. The external mic is plugged to the headphones jack, but it is not being shown in the System Preferences. I did a little bit of research, and there is some rumor, that the headphone jack only supports digital-in for mics. Is there a built-in way to use the analogue stereo sound without purchasing an external converter or a new mic? With my old MacBook 2,1 it was usual for me to do this, but with my new MacBook Air 4,1 it seems to be a tough task.

    Read the article

  • Input field separator in awk

    - by Matthijs
    I have many large data files. The delimiter between the fields is a semicolon. However, I have found that there are semicolons in some of the fields, so I cannot simply use the semicolon as a field separator. The following example has 4 fields, but awk sees only 3, because the '1' in field 3 is stripped by the regex (which includes a '-' because some of the numerical data are negative): echo '"This";"is";1;"line of; data"' | awk -F'[0-9"-];[0-9"-]' '{print "No. of fields:\t"NF; print "Field 3:\t" $3}' No. of fields: 3 Field 3: ;"line of; data" Of course, echo '"This";"is";1;"line of; data"' | awk -F';' '{print "No. of fields:\t"NF}' No. of fields: 5 solves that problem, but counts the last field as two separate fields. Does anyone know a solution to this? Thanks! Matthijs

    Read the article

  • Excel Macro Help - Data Input

    - by B-Ballerl
    I'm want to develop a macro where in my excel worksheet I type a date in a specific cell, and the macro will go into a folder containing text files. A database you could say. I want it to find the corresponding file name which is written as a date, put the data through a delimeter, and paste into the cells directly below where I orginally put the date. I'm very new with Macro's so if you must answer try to be a little more simple than you might usually be. Thanks In Advance if anyone can Help!!

    Read the article

  • Trobleshooting input device detection in Windows Xp Pro Sp3

    - by iceman
    My laptop (Acer travelmate 4152NlCi)doesn't respond to the keyboard and mouse anymore while booting in Windows Xp Pro Sp3. i can't type the password and login. I have Opensuse 11.0 on it as well and it works. So I can boot into Linux and not Windows, not even in safe mode. What would be the troubleshooting steps?

    Read the article

  • 5.1 Sound Card with digital input for Ubuntu

    - by phsr
    I have a Intel Atom PC that I'm shoe-horning into a role as a media server. I have a 5.1 surround sound speaker set that works pretty well. I want to be able to take the optical out from my cable box or PS3 and route it into the PC so that I can play it surround sound. Is there a low price video card that has 5.1 and optical in that works with Ubuntu?

    Read the article

  • ViewSonic LCD Monitor Touch-input

    - by Synetech inc.
    I bought a used 15" ViewSonic LCD monitor (VP150m) and noticed that it has a 3.5mm connector on the back labeled “touch i/o”. I’m trying to figure out how to use the touch function but am having trouble finding anything useful. First, I cannot find any information on what kind of cable it uses (TS, TRS, TRRS, etc.), or how to connect it to the computer. Second, I cannot find touch drivers for it—though I can find a page that mentions how easy it is to install them. Does anyone have any information on using the touchscreen function of the VP150m? Thanks a lot.

    Read the article

  • Linux `alternatives --config` without user input

    - by Steve
    I am writing a RHEL kickstart script, and in my %post, I need to install a JRE. Basically, the current setup involves me needing to manually go in after first boot and set the newly installed JRE as the default using the alternatives --config command. Is there a way for me to pass arguments to alternatives so I don't have to manually pick the correct JRE?

    Read the article

  • Iptables state tracking

    - by complexgeek
    Hi there. I've just taken over administration of a fairly complex firewall ruleset for a firewall box running Fedora Core 12, and there's one thing about it that is puzzling me. When I run nmap on the gateway from outside the network, I see all the expected services, but also sunrpc on port 111. The INPUT chain has DEFAULT DROP set, and there is no rule allowing port 111. As best I can tell (watching the packet counters before/during/after the scan) it's being allowed by the rule: "-m state --state RELATED,ESTABLISHED -j ACCEPT" but I don't understand why a brand new TCP connection would be considered RELATED or ESTABLISHED. Any suggestions would be greatly appreciated. EDIT: Conntrack modules: nf_conntrack_netlink 14925 0 nfnetlink 3479 1 nf_conntrack_netlink nf_conntrack_irc 5206 1 nf_nat_irc nf_conntrack_proto_udplite 3138 0 nf_conntrack_h323 62110 1 nf_nat_h323 nf_conntrack_proto_dccp 6878 0 nf_conntrack_sip 16921 1 nf_nat_sip nf_conntrack_proto_sctp 11131 0 nf_conntrack_pptp 10673 1 nf_nat_pptp nf_conntrack_sane 5458 0 nf_conntrack_proto_gre 6574 1 nf_conntrack_pptp nf_conntrack_amanda 2796 1 nf_nat_amanda nf_conntrack_ftp 11741 1 nf_nat_ftp nf_conntrack_tftp 4665 1 nf_nat_tftp nf_conntrack_netbios_ns 1534 0 nf_conntrack_ipv6 18504 2 ipv6 279399 40 ip6t_REJECT,nf_conntrack_ipv6 INPUT chain on the filter table: -A INPUT -s 192.168.200.10/32 -p tcp -m tcp --dport 22 -m state --state NEW,ESTABLISHED -j ACCEPT -A INPUT -s 127.0.0.0/8 -i lo -j ACCEPT -A INPUT -p udp -m udp --sport 67:68 --dport 67:68 -j ACCEPT -A INPUT -d 192.168.200.5/32 -i eth0 -j ACCEPT -A INPUT -d 192.168.1.2/32 -i eth0 -j ACCEPT -A INPUT -d {public_ip}/32 -i ppp0 -p tcp -m multiport --dports 22,80,443 -j ACCEPT -A INPUT -d {public_ip}/32 -i ppp0 -p tcp -m multiport --sports 22,25,80,443 -j ACCEPT -A INPUT -d {public_ip}/32 -i ppp0 -p udp -m udp --dport 1194 -j ACCEPT -A INPUT -d {public_ip}/32 -i ppp0 -p udp -m udp --sport 1194 -j ACCEPT -A INPUT -d {public_ip}/32 -i ppp0 -p udp -m multiport --sports 53,123 -j ACCEPT -A INPUT -d {public_ip}/32 -i ppp0 -p icmp -m icmp --icmp-type 8 -j ACCEPT -A INPUT -i eth0 -m state --state NEW -j ACCEPT -A INPUT -d {public_ip}/32 -m state --state NEW -j ACCEPT -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT eth0 is connected to the internal network, eth3 is connected to an ADSL modem in bridge mode, ppp0 is the WAN connection tunneled over eth3.

    Read the article

  • ASP.NET MVC File Upload Error - "The input is not a valid Base-64 string"

    - by Justin
    Hey all, I'm trying to add a file upload control to my ASP.NET MVC 2 form but after I select a jpg and click Save, it gives the following error: The input is not a valid Base-64 string as it contains a non-base 64 character, more than two padding characters, or a non-white space character among the padding characters. Here's the view: <% using (Html.BeginForm("Save", "Developers", FormMethod.Post, new {enctype = "multipart/form-data"})) { %> <%: Html.ValidationSummary(true) %> <fieldset> <legend>Fields</legend> <div class="editor-label"> Login Name </div> <div class="editor-field"> <%: Html.TextBoxFor(model => model.LoginName) %> <%: Html.ValidationMessageFor(model => model.LoginName) %> </div> <div class="editor-label"> Password </div> <div class="editor-field"> <%: Html.Password("Password") %> <%: Html.ValidationMessageFor(model => model.Password) %> </div> <div class="editor-label"> First Name </div> <div class="editor-field"> <%: Html.TextBoxFor(model => model.FirstName) %> <%: Html.ValidationMessageFor(model => model.FirstName) %> </div> <div class="editor-label"> Last Name </div> <div class="editor-field"> <%: Html.TextBoxFor(model => model.LastName) %> <%: Html.ValidationMessageFor(model => model.LastName) %> </div> <div class="editor-label"> Photo </div> <div class="editor-field"> <input id="Photo" name="Photo" type="file" /> </div> <p> <%: Html.Hidden("DeveloperID") %> <%: Html.Hidden("CreateDate") %> <input type="submit" value="Save" /> </p> </fieldset> <% } %> And the controller: //POST: /Secure/Developers/Save/ [AcceptVerbs(HttpVerbs.Post)] public ActionResult Save(Developer developer) { //get profile photo. var upload = Request.Files["Photo"]; if (upload.ContentLength > 0) { string savedFileName = Path.Combine( ConfigurationManager.AppSettings["FileUploadDirectory"], "Developer_" + developer.FirstName + "_" + developer.LastName + ".jpg"); upload.SaveAs(savedFileName); } developer.UpdateDate = DateTime.Now; if (developer.DeveloperID == 0) {//inserting new developer. DataContext.DeveloperData.Insert(developer); } else {//attaching existing developer. DataContext.DeveloperData.Attach(developer); } //save changes. DataContext.SaveChanges(); //redirect to developer list. return RedirectToAction("Index"); } Thanks, Justin

    Read the article

  • How does CommandManager.RequerySuggested work?

    - by Andrei Rinea
    The MSDN only states that Occurs when the CommandManager detects conditions that might change the ability of a command to execute. However I can't seem to find any traces of how this works, what I should be aware of / avoid etc... Does it just listen for input? (i.e.: mouse moves, keys pressed and so on)

    Read the article

  • Watin - Watin.Core.Exceptions.ElementNotFoundException

    - by potterosa
    I have code that runs that gives me the error : Could not find a 'INPUT (text password textarea hidden) or TEXTAREA' tag containing attribute name with value ________ (It's testing a website) It says it can't find a What reason could it be that it can't find it? It finds others without an issue on other pages, but this page for some odd reason it baulks? How can that be?

    Read the article

  • Enforce numbers in mobile web form

    - by Peter Smit
    I have a simple webform targeted for Opera Mini and Opera Mobile. I'm using just a HTML input element. Now I would like to restrict the element to only have integer numbers. Is there a way to enforce this in this browser (possible even that the phone will have it's number mode on when entering the form)? And if I wanted to allow floats, is something possible then?

    Read the article

  • passing input text value to ajax call

    - by amby
    Hi, I have to pass string entered in the input text to server method calling through jquery ajax. But its not going through. can please somebody tell me what i m doing wrong here. Below is the code: $.ajaxSetup({ cache: false timeout: 1000000}); function concatObject(obj) { strArray = []; //new Array for (prop in obj) { strArray.push(prop + " value :" + obj[prop]); } return strArray.join();} //var Eid = "stephen.gilroy1"; function testCAll() { //var ntid = $('#Eid').val(); $.ajax({ type: "POST", url: "Testing.aspx/SendMessage", //data: "{'ntid':'stephen.gilroy1'}", //working data: "{'ntid': $('#Eid').val()}", contentType: "application/json; charset=utf-8", dataType: "json", success: function(result) { alert(result.d); resultData = eval("(" + result.d + ")"); $("#rawResponse").html(result.d); //$("#response").html(resultData.sn); }, error: function(result) { alert("jQuery Error:" + result.statusText); } });}$.ajaxSetup({ cache: false //timeout: 1000000 }); function concatObject(obj) { strArray = []; //new Array for (prop in obj) { strArray.push(prop + " value :" + obj[prop]); } return strArray.join(); } //var Eid = "stephen.gilroy1"; function testCAll() { //var ntid = $('#Eid').val(); $.ajax({ type: "POST", url: "Testing.aspx/SendMessage", //data: "{'ntid':'stephen.gilroy1'}", //working data: "{'ntid': $('#Eid').val()}", contentType: "application/json; charset=utf-8", dataType: "json", success: function(result) { alert(result.d); resultData = eval("(" + result.d + ")"); $("#rawResponse").html(result.d); //$("#response").html(resultData.sn); }, error: function(result) { alert("jQuery Error:" + result.statusText); } }); } above is js file and below is its aspx file: <%@ Page Language="C#" AutoEventWireup="true" CodeFile="Testing.aspx.cs" Inherits="Testing" %> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head runat="server"> <title></title> <script src="jquery.js" type="text/javascript"></script> <script src="Testing.js" type="text/javascript"></script> <script src="json2.js" type="text/javascript"></script> </head> <body> <form id="form1" runat="server"> <div> Employee's NTID: <input type="text" id = "Eid" name="Employee_NTID" /> <asp:GridView ID="GridView1" runat="server"> </asp:GridView> <br /> <br /> <input type="button" onclick="testCAll()" value = "Search"/> <div id="rawResponse"></div> <hr /> <div id="response"></div> </div> </form> </body> </html>

    Read the article

  • Editable table view cell

    - by Koning Baard XIV
    I am creating an application. I have to implement a bookmark feature, and adding one should be similar to this: I want editable UITableViewCells for text input. I was wondering if there is an easier way then embedding a UITextField into a UITableViewCell. And if not, can someone explain how I can use the UITextField inside it? Thanks

    Read the article

  • How to retrieve the size of a file before uploading it?

    - by geowa4
    I have an file input tag in my web app. I'd like to check that the file isn't too big before sending it to the server. Of course, I still have validation server side. Is there any way to do this with JavaScript? It must work in IE7+ and FF3+. Thank you. EDIT: somefileinputobject.files[0].filesize works in FF, but not IE.

    Read the article

< Previous Page | 46 47 48 49 50 51 52 53 54 55 56 57  | Next Page >