Search Results

Search found 13752 results on 551 pages for 'ip protocol'.

Page 50/551 | < Previous Page | 46 47 48 49 50 51 52 53 54 55 56 57  | Next Page >

• how to use iptables to block the IP of device connected to openwrt router

  - by scola

  I have two routers(A,B).the A connect to internet with IP:192.168.1.1 The openwrt router B connect the lan of A by bridge with static IP:192.168.1.111. I am learning to use iptables to control the devices connected to B(wlan) . I use my phone to connect wifi of B,the phone's IP is IP:192.168.1.100.it can surf the internet normally. I want to block the phone's IP to make the phone can not connect to internet. refer to http://bredsaal.dk/some-small-iptables-on-openwrt-tips iptables -A input_wan -s 192.168.1.100 --jump REJECT iptables -A forwarding_rule -d 192.168.1.100 --jump REJECT but it do not work.the phone still connect to internet normally. and I tried other chain(INPUT,OUTPUT,FORWARD).so many chains confused me. iptables -I OUTPUT -o br-lan -s 192.168.1.100 -j DROP and it do not work again. I'm sure that the iptables have no problem. root@OpenWrt:/etc# iptables -L|grep Chain Chain INPUT (policy ACCEPT) Chain FORWARD (policy DROP) Chain OUTPUT (policy ACCEPT) Chain forward (1 references) Chain forwarding_lan (1 references) Chain forwarding_rule (1 references) Chain forwarding_wan (1 references) Chain input (1 references) Chain input_lan (1 references) Chain input_rule (1 references) Chain input_wan (1 references) Chain output (1 references) root@OpenWrt:/etc# ifconfig br-lan Link encap:Ethernet HWaddr 0C:82:68:97:57:BA inet addr:192.168.1.111 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::e82:68ff:fe97:57ba/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:14976 errors:0 dropped:0 overruns:0 frame:0 TX packets:7656 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2851980 (2.7 MiB) TX bytes:1902785 (1.8 MiB) eth0 Link encap:Ethernet HWaddr 0C:82:68:97:57:BA UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:58201 errors:0 dropped:11 overruns:0 frame:0 TX packets:45012 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:54591348 (52.0 MiB) TX bytes:5711142 (5.4 MiB) Interrupt:4 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:312 errors:0 dropped:0 overruns:0 frame:0 TX packets:312 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:39961 (39.0 KiB) TX bytes:39961 (39.0 KiB) mon.wlan0 Link encap:UNSPEC HWaddr 0C-82-68-97-57-BA-00-48-00-00-00-00-00-00-00-00 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:4900 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:32 RX bytes:1223807 (1.1 MiB) TX bytes:0 (0.0 B) wlan0 Link encap:Ethernet HWaddr 0C:82:68:97:57:BA UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:37346 errors:0 dropped:0 overruns:0 frame:0 TX packets:49662 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:32 RX bytes:3808021 (3.6 MiB) TX bytes:54486310 (51.9 MiB) root@OpenWrt:/etc/config# cat network config 'interface' 'loopback' option 'ifname' 'lo' option 'proto' 'static' option 'ipaddr' '127.0.0.1' option 'netmask' '255.0.0.0' config 'interface' 'lan' option 'ifname' 'eth0' option 'type' 'bridge' option 'proto' 'static' option 'ipaddr' '192.168.1.111' option 'netmask' '255.255.255.0' option 'gateway' '192.168.1.1' option dns 192.168.1.1 and how to use iptables to control the network of wlan? Thanks in advance and sorry for poor English.

  Read the article

• Best protocol for client/server communication, from PHP/Perl to C++/Qt4

  - by Kyle

  I'm the author of an Open Source kiosk management system, Libki. The current version, though functional, was very much a learning experience for me. I'm working on a complete rewrite and am having a hard time deciding what protocol to use. The server will be written in PHP or Perl. Most likely PHP because I need to support some uncommon protocols that Library software use, ( SIP and NCIP ). So far I've only found a SIP2 library in PHP. The client is written in C++/Qt4. I'm looking at RPC and REST for client/server communication. I've found RPC client libraries for Qt4, and REST is already part of the Qt4 libraries. Is there an alternative I've missed? So far, REST seems to be the winner.

  Read the article

• Object to Network serialization - with an existing protocol

  - by cpf

  I'm writing a client for a server program written in C++. As is not unusual, all the networking protocol is in a format where packets can be easily memcopied into/out of a C++ structure (1 byte packet code, then different arrangements per packet type). I could do the same thing in C#, but is there an easier way, especially considering lots of the data is fixed-length char arrays that I want to play with as strings? Or should I just suck it up and convert types as needed? I've looked at using the ISerializable interface, but it doesnt look as low level as is required.

  Read the article

• MS WebBrowser + Embedded HTML Resource + res:// Protocol

  - by letthewookiewin

  Hi, I have an embedded HTML resource (helloworld.htm) inside my Visual Studio project. (Ie, I've added an HTML file to the project and set its properties to "Embedded Resource". Within the same application I have a WebBrowser control. I'd like to direct the WebBrowser control to display the HTML resource using the res:// protocol. But I can't figure out the exact format needed to address an embedded resource using this style of URL. Any ideas? Thanks!

  Read the article

• Multi domain server with dedicated SSL's HA

  - by user3692800

  I am hosting a server with 150 domain names (websites), each of the ssl's requere dedicated IP address. So server windows 2008, with 150 IP addressees and 150 websites. I need to have high availability solution. So thinking setting up AWS but ELB will not be a solution... and max IP's I can get per instance is 12 addresses. So what can I do to have all 150 sites hosted on one instance and be HA with instance in different availability zone.

  Read the article

• Accurate way to check latency between Server ?

  - by Rick

  Hi, First of all, I hope my post are is posted in the right section . Below are something i got confused hope you one can help. My business partner 's IP server are in: Sanjose, CA , and I am looking for a datacenter which give the least latency to that IP. I found 2 . 1st datcenter is in San Francisco, CA . 2nd data center is in Newyork. Then I do the ping from each datacenter to the my partner's IP. 1st datcenter's result: 75ms 2nd datacenter's result: 2ms I 've done multiple time, 2nd datacenter always give better result. Now my question is: Isn't the 1st datacenter suppose to give better result, since their location are closer ? How come the result produce different, what is the accurate way to check latency ? Thanks

  Read the article

• DNS for route between WAN & LAN

  - by David Maitland

  I have a few machines set up on my internal 192.168.1.* network and i have one public ip, my router is links all ports to on internal linux machine on my network 192.168.1.3. I want to know how to configure the DNS server on my linux box to forward to internal LAN ip's depending on the host name. EG. computer4.83.22.56.12 would find my box then forward to 192.168.1.4 on the local network. This is so i can run multiple web server under one ip. btw, i use Ubuntu. Thanks Dave

  Read the article

• Oracle sql developer can acess from loalhost but not ip address

  - by Welcome Always

  Here i have installed widows server 2008 64 orale 11g r2 64 now i want to access this from the ip address that i have set to my server not working i can't access trough the ip address.... when i use on my application .....local host it can get connected but when i add the ip for example 10.0.0.2 it's not connecting now simply also on local when i write the ip address it's not connecting but with localhost works fine..... so even i have used listener. regards

  Read the article

• How I can ask a specify Name Server to have the IP of a domain

  - by Yuan Chen

  For example, I have a domain name example.com hosted at some host free, and now I want to know where is the IP of the host. so I can't configure the registrar control panel to point to that IP. So is there any way to know that IP, without configure the name server to point to it. and I know the Name Server of the hosting. for example ns1.hosting.com can I ask the specify ns1.hosting.com to get the IP of example.com Thanks

  Read the article

• Network Table assistance

  - by mitchnufc

  I am designing a small network and have came up with the following table I am just wondering if this seems right, would appreciate some feedback, thanks. Network/Router First IP Last IP Subnet Host Broadcast Router 1 162.10.0.1 162.10.0.7 255.255.255.248 162.10.0.0 162.10.0.8 Network 1 162.10.1.1 162.10.2.253 255.255.254.0 162.10.1.0 162.10.2.254 Network 2 162.10.0.9 162.10.0.14 255.255.255.248 162.10.0.8 162.10.0.15 Router 2 162.10.0.17 162.10.0.18 255.255.255.252 162.10.0.16 162.10.0.19 Network 3 162.10.0.21 162.10.0.146 255.255.255.128 162.10.0.20 162.10.0.147 Router one is the IP assigned by the ISP

  Read the article

• Implementation communication protocols in C/C++

  - by MeThinks

  I am in the process of starting to implement some proprietary communication protocol stack in software but not sure where to start. It is the kind of work I have not done before and I am looking for help in terms of resources for best/recommended approaches. I will be using c/c++ and I am free to use use libraries (BSD/BOOST/Apache) but no GPL. I have used C++ extensively so using the features of C++ is not a problem. The protocol stack has three layers and it is already fully specified and formally verified. So all I need to do is implemented and test it fully in the specified languages. Should also mention that protocol is very simple but can run on different devices over a reliable physical transport layer Any help with references/recommendations will be appreciated. I am willing to use a different language if only to help me understand how to implement them but I will have to eventually resort to the language of choice.

  Read the article

• Image ransfer using hessian protocol from client's folder to tomcat server

  - by ?? ?

  My goal is to upload a image(.jpg or .png)from client's folder to tomcat6 server through hessian protocol. And do image processing using opencv on server, then return the image back to client. Question1. Is the following transfering steps correct? put a test.jpg image on client's folder -- convert the test.jpg in client.java(main.java) class to BufferedImage -- convert the BufferedImage to mat or Iplimage in server for using openCV.I have set a hello world sample from Simple Messaging Example using Hessian , and searched from Hessian with large binary data and other websites, but still dont know how to use it! Question2. Is there a related JAVA sample code? Thank you very much. Btw, I am using ubuntu12+netbeans7.2

  Read the article

• What is a Dynamic way to Connect to a Virtual Machine's Webserver from its Host Machine? [closed]

  - by Jonnybojangles

  As a Web-Developer what is the most efficient (automated) way to connect to a Virtual Machine (VM) running a development webserver from it’s Host Machine (the machine running the VM) when you do not have control over the networks (home, Startbucks, work, etc) you are connected to? Currently I start my VM (a VirtualBox VM running CentOS), run ifconfig to determine the VM’s current IP. I then take that IP and map it my Host machine’s host file so that I can access the VM’s webserver from the Host. I feel that this is not an efficient way to connect to my VM’s webserver because each time I connect to a new network (a few times a day) I need to repeat the IP look up and host file update, and sometimes restart the VM's network service.

  Read the article

• IP to MAC adress translation

  - by b-gen-jack-o-neill

  Hi, please, tell me one thing I can´t understand. On PC networks which uses TCP/IP protocol set, why is ip adress further translated into MAC adress? I mean, when every device knows its IP, why furher use MAC and not to use IP number as adress directly?

  Read the article

• What is an Automated way to Access a Virtual Machine's Webserver from its Host Machine? [closed]

  - by Jonnybojangles

  As a Web-Developer what is the most efficient (automated) way to connect to a Virtual Machine (VM) running a development webserver from it’s Host Machine (the machine running the VM) when you do not have control over the networks (home, Startbucks, work, etc) you are connected to? Currently I start my VM (a VirtualBox VM running CentOS), run ifconfig to determine the VM’s current IP. I then take that IP and map it my Host machine’s host file so that I can access the VM’s webserver from the Host. I feel that this is not an efficient way to connect to my VM’s webserver because each time I connect to a new network (a few times a day) I need to repeat the IP look up and host file update, and sometimes restart the VM's network service.

  Read the article

• Get user IP via comment Form

  - by jasmine

  I have inserted a hidden input in my comment form: $ip = $_SERVER['REMOTE_ADDR']; <input type="hidden" name="c-ip" value="<?php echo $ip; ?>"> With this input, ip column is empty in mysql. What is wrong in input. Thanks in advance

  Read the article

• Need for explanation: NetBIOS over TCP/IP on VMware network adapter disturbs access to network share

  - by gyrolf

  Some time ago nearly all workstations in our team (Windows XP SP2) exhibited intermittend but frequent delays when accessing shares on the network. Typically the first access to a share which hadn't been accessed for some time resulted in a nearly frozen workstation for up to 30 seconds. Then everything started working fine again. Using TCPView from Sysinternals I saw that during this delays there was a connection to the netbios-ssn port on the file server which was in state SYN_SENT. First try: Disable NetBIOS over TCP/IP for the intranet network adapter. Problem solved, but I didn't like to manipulate our centrally managed network configuration for the intranet. Second try: Disable NetBIOS over TCP/IP only for the VMWare network adapter (VMNet1 used for host only communications). Problem solved again! My questions: Why does NetBIOS over TCP/IP on one network adapter disturb NetBIOS over TCP/IP on another network adapter? Is this problem specific to VMWare network adapters? Has anybody else seen this phenomen? Additional information: VMWare Workstation version 6.0.3 At the time I started seriously analysing the problem it was no more possible to find out what had been changed to our systems at the time the problems started.

  Read the article

• Why does ping flooding a domain name freezes and not a direct ip address

  - by CYREX

  I am wondering why, when ping flooding a domain, the ping flood freezes after a couple of seconds then continues and this freeze, unfreeze continues until i stop the ping flood. When i do the same using the ip it does not freeze. NEVER. i did for example sudo ping -f IP (It does not freeze) then i did sudo ping -f DomainName (It freezes after a couple of seconds) Why does ping flooding an IP not freezes and ping flooding the same place using the domain name does freeze. EDIT - What i mean about freezing is that the behavior of the ping flood should send a ping and create a dot (.) for each ping but also remove each dot (.) after receiving the echo request. Looks something like this: .......... <-- This means you just send 10 ping requests. If the requests are answer, for each request answer a dot is removed. The freeze happens when this is sending or receiving. The dots will stay there frozen, like is not receiving or sending any packets. For the PING FLOOD. I do not mean in the evil way of flooding a place, i mean in the testing way. To test the performance/speed of the request send and answered of the ping requests. If you send a ping flood to google's IP for about 10 seconds you would have send about 1000 packets.but if you do it to google's domain name (google.com) it will create the freeze am talking about. IMPORTANT - Do not confuse with flooding a site with ping of death attacks.

  Read the article

• DrayTek 2820 configuration using public IP addresses

  - by Kev

  I have a /29 range of public IP addresses assigned to me by my ISP. I'm trying to configure a SIP VOIP handset to register with my VOIP provider who recommend using public IP addresses rather than NAT. I have a DrayTek 2820 router flashed with the latest firmware and have configured my router as per DrayTek's FAQ at: How do I use a public subnet on the LAN (non-NAT operation ) ? My IP range is: xx.xx.94.16 -> xx.xx.94.23 This gives a usable range of: xx.xx.94.17 -> xx.xx.94.22 My router's public IP address is: xx.xx.94.17, the SIP VOIP handset is allocated xx.xx.94.18. I have a second internet connection and via that I can ping the handset. However for some reason I can't seem to get it to register with the provider. I tried adding a new Firewall filter to pass through from WAN to LAN: Source: ANY, Destination: xx.xx.94.18, UDP - Ports 1024 -> 65535 Out of interest I also tried opening port 80 to see if I could browse to the phone's admin web interface but no joy. I know that my ISP aren't blocking inbound service ports because I NAT Port Forwarded port 80 to one of my internal web servers and it rendered a test page I had set up. All the NAT settings are reset to factory defaults, i.e. there are no Port Redirection, DMZ Host, Open Ports or Address Mappings configured. The handset I'm using is a GrandStream GXP-2000. Is there anything else I should be doing?

  Read the article

• Two domains, two servers, one dynamic IP address

  - by giantman

  I have two domains hi.org and bye.net and one dynamic IP address and two servers. I want to attach one domain bye.net to server1 and hi.org to server2. I'm using Apache wamp 2.0i. I have two servers behind one router with a dynamic IP address #httpd.conf file additions <IfModule mod_proxy.c> ProxyRequests Off <Proxy *> Order deny,allow Allow from all </Proxy> </IfModule> #vhost file additions NameVirtualHost *:80 #default <VirtualHost *:80> DocumentRoot "c:/wamp/www/fallback" </VirtualHost> # Server 1 <VirtualHost *:80> DocumentRoot "c:/wamp/www" ServerName h**p://bye.net ServerAlias bye.net </VirtualHost> # Server 2 <VirtualHost *:80> ProxyPreserveHost On ProxyPass / h**p://192.168.1.119/ DocumentRoot "g:/wamp/www" ServerName h**p://hi.org ServerAlias hi.org </VirtualHost> After doing all this I fallback to server1 only I don't get the page hi.org I only get the page bye.net, I don't even get the default fallback page which gets executed when a person enters IP address but not the domain name. I use Windows 7 (server 2) and Windows XP (server 1) UPDATE: I needed to remove DocumentRoot "g:/wamp/www" line :D it was there by mistake! things are working fine now. But one thing: the URL gets replaced by the local ip address any way to not make that happen?

  Read the article

• Using virtual IP with stunnel and haproxy

  - by beardtwizzle

  Hi there, We have a load-balancer setup, in which an HTTPS Request flows through the following steps:- Client -> DNS -> stunnel on Load-Balancer -> HAProxy on LB -> Web-Server This setup works perfectly when stunnel is listening to the local IP of the Load-Balancer. However in our setup we have 2 load-balancers and we want to be able to listen to a virtual IP, which only ever exists on one LB at a time (keepalived flips the IP to the second LB if the first one falls over). HAProxy has no problem in doing this (and I can ping the assigned virtual IP on the load-balancer I'm testing), but it seems stunnel hates the concept. Has anyone achieved this before (below is my stunnel config - as you can see I'm actually listening for ALL traffic on 443):- cert= /etc/ssl/certs/mycert.crt key = /etc/ssl/certs/mykey.key ;setuid = nobody ;setgid = nogroup pid = /etc/stunnel/stunnel.pid debug = 3 output = /etc/stunnel/stunnel.log socket=l:TCP_NODELAY=1 socket=r:TCP_NODELAY=1 [https] accept=443 connect=127.0.0.1:8443 TIMEOUTclose=0 xforwardedfor=yes Sorry for the long-winded question!

  Read the article

• D-LINK 2450U DSL router: Port forwarding forwading to the modem itself, not the specified IP

  - by axk

  I found a similar question but it has no satisfactory answers. I have a D-LINK 2540U DSL router. It has a basic port forwarding(under DNS - Virtual Servers) configuration in the administration panel where you specify: external port range, protocol, internal port range, server IP address and it is supposed to forward that port to that IP address. When I first set it up for a Real VNC connection it worked fine, just as I expected. Then I added a DynDNS configuration entry in the router's 'Dynamic DNS' section and added an additional SSH (22) forwarding rule. The SSH forwarding also worked fine (now with the dynamic hostname, but I suppose it doesn't make any difference as far as SSH is concerned). Then I removed the SSH rule and after that the VNC forwarding stopped working with the VNC client failing to connect (I have tried to connect with telnet and it also failed to connect, so it wasn't a VNC problem). After adding a rule for port 80 it turned out it would forward on port 80 though not to the specified server IP but to the modem itself. At least it is what it looks like, because it gives me the administration panel when I connect to my external IP (both using a browser and plain telnet in which case I can see that it is mini_hhtpd sitting on the port, which is obviously the modem's administration panel). Have anybody encountered a similar problem with port forwarding? I have tried to do a reset through the administration panel and to restore a backup of the settings made before I started playing with port forwarding, but it didn't help. Should I do a 'hard' reset with the button on the modem? Is it any different from the administration panel's reset (Restore default)?

  Read the article

• LAN->LAN IP translation (for TortoiseSVN + Artifacts + Buffalo router)

  - by Armchair Bronco

  Here's my scenario: I've got a VisualSVN server on my main dev box @ home. I'm also using Visual Studio 2010, TortoiseSVN, VisualSVN client (for source control), and Versioned 'Artifacts' (for bug tracking). (I had to modify the fake URL's below to use only one slash because as a new user, I can't post more than one real URL.) I've got my Buffalo AirStation WHR-HP-G300N router properly configured so my business partner can connect to the SVN server. I have port forwarding enabled for the internet-side IP address (like http:/99.888.77.66:443) which gets forwarded to an internal IP (like 192.168.11.6). This part is working great. The problem I'm having is with the integration piece between TortoiseSVN and my bug tracking system. I need to provide a bugtraq:url property, but I haven't been able to get relative paths to work. So I'm forced to use an absolute URL. On my end, I need to use the name of my server (for example: bugtraq:url = https:/my-server/svn/bla..), but this doesn't work for my partner. He needs to specify the IP address (for example: bugtraq:url = https:/999.888.77.66:443/svn/bla...) Is there a way to configure my router such that the IP address for this parameter gets re-routed/re-mapped to "https://my-server" if the request originates from the LAN itself? My router's software supports LAN-Internet and Internet-LAN, but I don't see LAN-LAN.

  Read the article

• Changing IP address in IIS for SharePoint site results in Directory listing error

  - by Dan

  I have a server here that has 2 roles. One is Exchange 2007 and the other is MOSS 2007. In IIS i have a site, go.domain.com which has our OWA. The other is internal.domain.com which is the MOSS site. I have given the NIC local IPs and each site is using host headers. The GO site has an SSL cert from NetSol, and the MOSS site has a self signed. Right now going to either shows the NetSol site, which browsers complain about when going to the internal.domain.com site, obviously, since they are on the same IP in IIS. Both sites have always run off the original IP of 10.0.0.3 in IIS. When i added the second IP to the NIC, (10.0.0.6) and changed the Sharepoint site in IIS to use this for http and https access, I now get this message in a browser when trying to connect. Directory Listing Denied This Virtual Directory does not allow contents to be listed. Changing the IP back to 10.0.0.3 and the internal site is back up. What am I missing here? Do i need to fool around with Alternate Access Mappings in Central Admin? Am i completely missing the point with multiple SSL certs and host headers?

  Read the article

• OSX: Mimic Ubuntu IP Masquerading via iptables with ipfw

  - by Dogbert

  Good day, I am attempting to replicate a setup I have between a router and an Ubuntu PC, and have the same setup working on my MacBook (10.6, Snow Leopard). First, I have a router that has a USB port. When I plug it into my Ubuntu PC, it creates an RNDIS connection, allowing me to connect to the router over the USB cable via an IP connection. When I plug it into my computer via USB, it gets assigned an IP address of 172.16.84.1, and a new adapter appears when I type ifconfig. I can then SSH into the device via ssh [email protected]. When I log in to the device, I flush the routes, then create the default route: admin@localhost> route -f admin@localhost> route add default 172.16.84.2 Now, in my Ubuntu machine, I use iptables to enable IP masquerading: root@Valhalla> sudo iptables -t nat -A POSTROUTING -s 172.16.84.2 -j MASQUERADE Once this is all done, the router has internet access over the USB connection to my PC. I am trying to replicate this exact setup on my MacBook now (Snow Leopard), but iptables does not exist for OSX, not even a Macports version exists. I have scoured through other questions on StackOverflow that cover the usage of the ipfw command, which apparently works as a drop-in replacement for iptables. However, the syntax is significantly different, and I'm pretty much lost. Does anyone with some experience with ipfw have some suggestions on how I could accomplish this and create a NAT connection via IP masquerading like I could with my Ubuntu PC? Thank you for your assistance.

  Read the article

< Previous Page | 46 47 48 49 50 51 52 53 54 55 56 57  | Next Page >