Search Results

Search found 5405 results on 217 pages for 'minimal requirements'.

Page 50/217 | < Previous Page | 46 47 48 49 50 51 52 53 54 55 56 57  | Next Page >

• USB keyboard does not load after 13.10 upgrade

  - by Paul

  Problem: Running kernel 3.11.0-12-generic after a Ubuntu upgrade from 13.04 to 13.10 my USB keyboard is not recognised, thus I am not able to unlock my encrypted disk. I suspect it might be related to a minimal/incorrect install of initrd. Question: How do I go about getting the newest kernel to recognise my generic USB keyboard, allowing me to unlock my encrypted disk? What I have tried: I have already re-installed the newest kernel: sudo apt-get install --reinstall linux-image-generic linux-image and I have also updated the initrd: update-initramfs -c -k 3.11.0-12-generic Back story: I just completed upgrading my Ubuntu system from 13.04 to 13.10. When I subsequently rebooted by system I was no longer able to enter my encryption password (passphrase) as the keyboard drivers did not load. Temporary workaround: Earlier in the boot process (before the keyboard stops working) I was able to enter GRUB menu were I choose to boot from an older kernel (3.8.0-31-generic) which did load the USB keyboard drivers. This is currently the kernel I am running. Thanks

  Read the article

• Permissions scheme not working

  - by ReaZem

  I am currently building a home server and I am trying to give minimal permissions to every service. I am new to permissions management and this is an awesome learning experience for me :). drwxr----- 7 reazem enter-home 4096 Sep 9 21:43 reazem drwxrws--- 3 reazem minidlna 4096 Sep 9 21:36 media reazem is my home folder and media is my media folder, it is situated directly inside my home. The minidlna user is part of the following groups : minidlna, enter-home. I get the following error: Media directory not accessible! [/home/reazem/media] I was hoping that because the minidlna user is part of the enter-home group, it could get inside the home folder, and then inside the media folder because it is in the minidlna group. Where is my mistake? Edit: I found out that chmod g+x /home/reazem solved the problem, but why? Why would you need the execute permission to get inside another directory? Thank you!

  Read the article

• Are there any Phone Interview equivalents to FizzBuzz?

  - by Jordan

  I think FizzBuzz is a fine question to ask in an in-person interview with a whiteboard or pen and paper handy to determine whether or not a particular candidate is of bare-minimum competence. However, it does not work as well on phone interviews because any typing you hear could just as easily be the candidate's Googling for the answer (not to mention the fact that reading code over the phone is less than savory). Are there any phone-interview questions that are equivalent to FizzBuzz in the sense that an incompetent programmer will not be able to answer it correctly and a programmer of at least minimal competence will? Given a choice, in my particular case I am curious about .NET-centric solutions, but since I was not able to find a duplicate to this question based on a cursory search, I would not mind at all if this question became the canonical source for platform-agnostic phone fizzbuzz questions.

  Read the article

• Framework for interaction between web-page and server-side script

  - by Carrier

  I want to make a web-page that will have several controls elements, among which there are elements like check-boxes, radio-buttons, "range selectors" (one can specify the min and max value, like it is done when you select range for prices in the online markets). The new values shall be sent to the "server-side", once changed (without any Submit buttons etc), and the "server-side" can return something (one or more numbers, etc). Does anyone know a good ajax-like framework that allows (with minimal adaptation / changes) to make such solution in an easy way? It will be good if the server-side of existing solution will be in Perl (not a big deal, but I know it much better than PHP or something else). Set of controls might change and depend on other parameter, so adding one extra element should not cause rewriting the whole thing. P.S.: I haven't working in this area for quite a while, so not aware of existing solutions in this area, and don't want to invent the wheel and write everything from scratch for something that already exist (at least, I hope so). Thanks in advance!

  Read the article

• Rythmbox library set to: multiple locations and no way to edit/change

  - by Pierre

  I previously set Rhythmbox to include a few different locations. Now following changes to my directory structure, I'd like to reflect these changes in Rhythmbox. But when I go to "Library Location", I see "Multiple locations Set" and I can only add to the list; no way to edit/remove. I Googled this problem and the only relevant results I get date back to 2006, probably referring to a previous version of Rhythmbox and specifying components/locations that I can't find on my system. Give a look at the documentation...kind of minimal. Any clues? Ubuntu 12.04 Rhythmbox 2.96

  Read the article

• Will a search engine lower the rank of my page if i have hidden iframes?

  - by Skurpi

  As a praxis, all external content on our site is put in iframes to lower the risks of any external parties injecting stuff to our users. We also do it to make sure our content shows up before banners, to make the site feel quicker. We now have an external script running which we want to put in an iframe, but it does not have any visible content to go with it so I want to put css "visibility: hidden;" on the iframe. I read in a forum somewhere that search engines will lower the rank of a page, or even drop the page, if a iframe has "the minimal size of 1x1px". Will a search engine lower the rank of my page if I have a hidden (or 1px big) iframe?

  Read the article

• Getting collision detection in Pygames

  - by user36010

  I am writing a game in Pygame, I want to get collision detection. The aim is when a object hits another, the target object disappears. I want to avoid having classes and just have my code class less for now, in one script. This makes it difficult to get collision detection because the Rect method in Pygame is called on by an object(class). The logic I want to achieve is: object hits a target object target object disappears. is there an easy way to achieve this?(with minimal code possible)

  Read the article

• Will a search engine lower the rank of my page if i have a hidden iframes?

  - by Skurpi

  As a praxis, all external content on our site is put in iframes to lower the risks of any external parties injecting stuff to our users. We also do it to make sure our content shows up before banners, to make the site feel quicker. We now have an external script running which we want to put in an iframe, but it does not have any visible content to go with it so I want to put css "visibility: hidden;" on the iframe. I read in a forum somewhere that search engines will lower the rank of a page, or even drop the page, if a iframe has "the minimal size of 1x1px". Will a search engine lower the rank of my page if I have a hidden (or 1px big) iframe?

  Read the article

• GRUB prompt at boot after boot-repair

  - by gabrie

  I tried installing Ubuntu 12.04 from the live CD. The install went fine but i had the next error while booting : Grub stage 1.5 error 2. So I used boot-repair as explained here (http://doc.ubuntu-fr.org/boot-repair). Still not working, i got this while booting : "GNU GRUB version 1.99-21ubuntu3 Minimal bash-like line editing is supported. Etc...". Nothing more... Here the report rom boot-repair : http://paste.ubuntu.com/1408117 Could anyone help me ?

  Read the article

• Can my computer run Ubuntu? [duplicate]

  - by Harry B

  This question already has an answer here: How do I find out which version and derivative of Ubuntu is right for my hardware in terms of minimal system requirements? 2 answers Just want to check if my computer can run Ubuntu. It is an old IBM ThinkPad, so here are the basic stats I could find: IBM 28832ZU Processor Intel(R) Celeron(R) M processor 1300MHz Processor Speed 1.27 GHz Memory (RAM) 2048 MB Operating System Microsoft Windows XP Professional Operating System Version 5.1.2600 Intel Extreme Graphics 2M And here is some info pulled from the graphics panel NTEL(R) EXTREME GRAPHICS 2 FOR MOBILE REPORT Report Date: 06/28/2013 Report Time[hr:mm:ss]: 17:53:20 Driver Version: 6.14.10.3943 Operating System: Windows NT* 5.1.2600 Service Pack 2 Default Language: English DirectX* Version: 9.0 Physical Memory: 2038 MB Min. Graphics Memory: 8 MB Max. Graphics Memory: 64 MB Graphics Memory in use: 7 MB Processor: x86 family 6 Model 9 Stepping 5 Processor Speed: 1296 MHZ Device Revision: 2 Output Devices Connected to Graphics Accelerator * Active Notebook Displays:1

  Read the article

• Protecting the integrity of a game state while minimizing amount of data sent

  - by espais

  I'm developing a game in PHP/jQuery, and naturally have to be wary of any sort of data coming from the client. At present, I have tables of data representing the map (2D roguelike), monsters, items, and player(s). Initially, my thought was to simply package it all in a JSON object and send it every game tick, however when actually looking at the data I realized that's quite a large packet to be sending. So, my question is what is a good approach for minimizing data sent to the client? Obviously I would need to figure out some way of validating whatever it sends back. Initially we'd hoped to do some minimal verification on the client-side, but each time we thought of one thing we could do it is immediately invalidated with tools like Firebug. Kind of an open question I realize, but we want to get this right before we move on with our implementation so we don't have to shoehorn in bugfixes later on.

  Read the article

• downgrading a ubuntu 10.04 LTS virtual server

  - by castigli

  I am downgrading an existing ubuntu 10.04 LTS Virtual Server to one with less memory and a smaller drive ( from 80GB to 40GB ). My hoster ( hetzner.de ) does not give me the possibility of doing an inplace downgrade, so I have to create a new server. What is the best way to make an image of the first system and "apply it" to the new one ? I know there other answer but in my situation I am not sure I would be able to use Clonezilla or other GUI tools, because the installation is minimal with no GUI. Thanks in advance Michele

  Read the article

• Variable-step update() in game loop is falling behind, how can I get around this?

  - by ThatsGobbles

  I'm working on a minimal game engine for my next game. I'm using the delta update method like shown: void update(double delta) { // Update code that uses `delta` goes here } I have a deep hierarchy of updatable objects, with a root updatable that contains several updatables, each of which contains more updatables, etc. Normally I'd just iterate through each of the root's children and update each one, which would then do the same for its children, and so on. However, passing a fixed value of delta to the root means that by the time the leaf updatables are reached, it's been longer since delta seconds that have elapsed. This is causing noticable desyncing in my game, and time synchronization is very important in my case (I'm working on a rhythm game). Any ideas on how I should tackle this? I've considered using StopWatches and a global readable timer, but any advice would be helpful. I'm also open to moving to fixed timesteps as opposed to variable.

  Read the article

• Variable-step update() in game loop is falling behind, how can I get around this?

  - by ThatsGobbles

  I'm working on a minimal game engine for my next game. I'm using the delta update method like shown: void update(double delta) { // Update code that uses `delta` goes here } I have a deep hierarchy of updatable objects, with a root updatable that contains several updatables, each of which contains more updatables, etc. Normally I'd just iterate through each of the root's children and update each one, which would then do the same for its children, and so on. However, passing a fixed value of delta to the root means that by the time the leaf updatables are reached, it's been longer since delta seconds that have elapsed. This is causing noticable desyncing in my game, and time synchronization is very important in my case (I'm working on a rhythm game). Any ideas on how I should tackle this? I've considered using StopWatches and a global readable timer, but any advice would be helpful. I'm also open to moving to fixed timesteps as opposed to variable.

  Read the article

• Replacing DropBox with: Amazon S3 + SSL + GPG/TrueCrypt + Mounting on OSX ??

  - by Matt Rogish

  So, right now we're using DropBox to share various data files around between approximately 10 Mac OS X systems. However, we already have an S3 account and everyone on the lowest DropBox plan of $10/mo seems too expensive. We'd like to avoid any kind of local storage (share a disk on a desktop or something) since we're a geographically distributed team). So, I am contemplating something that would allow us to replace DropBox with our own home-grown solution. We are all fairly technical people and/or smart enough to follow some steps, so if it's not as "user friendly" as DropBox we're all comfortable with that. There are plenty of docs out there that have bits and pieces of what I want but some of the tools don't seem to fit the requirements: Transport security via SSL to the bucket Encryption of bucket contents Bi-directional syncing Most of the scripts I can find on the internet use "duplicity" which appears to fail #1 (it doesn't look like duplicity supports SSL to S3 - the docs don't state but the protocol looks plain old http http://www.nongnu.org/duplicity/duplicity.1.html#sect6 ) Many scripts use gpg to encrypt files. This seems like it could work, however I have to make sure that each OSX client is able to use the same key to encrypt and decrypt files (key management is left to me to manage). FTP and other client-based apps don't seem to support this at all. Finally, most of the scripts use one-way replication, e.g. using Amazon S3 as a simple backup store. As we'd be using Amazon S3 as the "repository" they fail this one. Whew. So, I'd love a single tool that does this but after an exhaustive search I don't think one exists. In my mind, the magical tool would be some combination of TrueCrypt and rsync. I'd be happy just knowing which tools out there can fulfill my 3 requirements, after that I can stitch together the rest. Any thoughts? THANKS!

  Read the article

• How can I install Satchmo?

  - by Jonathan Hayward

  I am trying to install Satchmo 0.9 on an Ubuntu 9.10 guest off of the instructions at http://bitbucket.org/chris1610/satchmo/downloads/Satchmo.pdf. I run into difficulties at 2.1.2: pip install -r http://bitbucket.org/chris1610/satchmo/raw/tip/scripts/requirements.txt pip install -e hg+http://bitbucket.org/chris1610/satchmo/@v0.9#egg=satchmo The first command fails because a compile error for how it's trying to build PIL. So I ran an "aptitude install python-imaging", locally copy the first line's requirements.text, and remove the line that's unsuccessfully trying to build PIL. The first line completes without error, as does the second. The next step tells me to change directory to the /path/to/new/store, and run: python clonesatchmo.py A little bit of trouble here; I am told that clonesatchmo.py will be in /bin by now, and it isn't there, but I put some Satchmo stuff under /usr/local, create a symlink in /bin, and run: python /bin/clonesatchmo.py This gives: jonathan@ubuntu:~/store$ python /bin/clonesatchmo.py Creating the Satchmo Application Traceback (most recent call last): File "/bin/clonesatchmo.py", line 108, in <module> create_satchmo_site(opts.site_name) File "/bin/clonesatchmo.py", line 47, in create_satchmo_site import satchmo_skeleton ImportError: No module named satchmo_skeleton A find after apparently checking out the repository reveals that there is no file with a name like satchmo*skeleton* on my system. I thought that bash might be prone to take part of the second pip invocation's URL as the beginning of a comment; I tried both: pip install -e hg+http://bitbucket.org/chris1610/satchmo/@v0.9\#egg=satchmo pip install -e hg+http://bitbucket.org/chris1610/satchmo/@v0.9#egg=satchmo Neither way of doing it seems to take care of the import error mentioned above. How can I get a Satchmo installation under Ubuntu, or at least enough of a Satchmo installation that I am able to start with a skeleton of a store and then flesh it out the way I want? Thanks, Jonathan

  Read the article

• How can I install Satchmo?

  - by Jonathan Hayward

  I am trying to install Satchmo 0.9 on an Ubuntu 9.10 32-bit guest off of the instructions at http://bitbucket.org/chris1610/satchmo/downloads/Satchmo.pdf. I run into difficulties at 2.1.2: pip install -r http://bitbucket.org/chris1610/satchmo/raw/tip/scripts/requirements.txt pip install -e hg+http://bitbucket.org/chris1610/satchmo/@v0.9#egg=satchmo The first command fails because a compile error for how it's trying to build PIL. So I ran an "aptitude install python-imaging", locally copy the first line's requirements.text, and remove the line that's unsuccessfully trying to build PIL. The first line completes without reported error, as does the second. The next step tells me to change directory to the /path/to/new/store, and run: python clonesatchmo.py A little bit of trouble here; I am told that clonesatchmo.py will be in /bin by now, and it isn't there, but I put some Satchmo stuff under /usr/local, create a symlink in /bin, and run: python /bin/clonesatchmo.py This gives: jonathan@ubuntu:~/store$ python /bin/clonesatchmo.py Creating the Satchmo Application Traceback (most recent call last): File "/bin/clonesatchmo.py", line 108, in <module> create_satchmo_site(opts.site_name) File "/bin/clonesatchmo.py", line 47, in create_satchmo_site import satchmo_skeleton ImportError: No module named satchmo_skeleton A find after apparently checking out the repository reveals that there is no file with a name like satchmo*skeleton* on my system. I thought that bash might be prone to take part of the second pip invocation's URL as the beginning of a comment; I tried both: pip install -e hg+http://bitbucket.org/chris1610/satchmo/@v0.9\#egg=satchmo pip install -e hg+http://bitbucket.org/chris1610/satchmo/@v0.9#egg=satchmo Neither way of doing it seems to take care of the import error mentioned above. How can I get a Satchmo installation under Ubuntu, or at least enough of a Satchmo installation that I am able to start with a skeleton of a store and then flesh it out the way I want? Thanks, Jonathan

  Read the article

• managing a high traffic media sharing website

  - by Jordan Westerman

  i'm in the process of developing a website that i predict will generate a lot of traffic. the site will be similar to many other sites offering free media streaming: mp3's. we are going to start with a pretty minimal amount of media to share, but the basic idea is that artists will set up a profile page with music they have made available for consumers to visit the page and listen to the music. we are starting with just a handful of artists, but i think that this project will generate more and more artist pages. eventually i'd like to set it up so consumers can create personalized playlists. how can i best prepare server space and bandwidth capabilities? i have a small team of web designers and programmers working on the site, as i am pretty illiterate when it comes to site management. as the ring leader of this organization, i am more or less looking for financial requirements and monthly burn rate estimates. i don't have a ton of capitol to start with, putting together a business plan, but i am seeking investments. i have a game plan to grow fast enough to be successful, and slow enough to manage the financial growth requirements. any questions i may have failed to ask myself? is it realistic to start this project on a shared server, and upgrade? any financial advice you think i can use? i really appreciate any advice given, as this is my first business venture. thank you all in advance. Jordan Westerman D.B.A. Badfish Productions, LLC

  Read the article

• Web hosting for multiple web sites providing system isolation

  - by Justin

  We have a small number of projects where we expect the client will not be maintaining the installed versions of applications we install to power the site (such as Drupal). Given that an important part of security is keeping things updated, we don't want to host these projects on our Plesk-powered dedicated servers that currently host lots of our other client's websites. Our goal is to find a host where we can deploy isolated instances (be these slices, virtual servers, grid servers, etc) for each individual (or groups of 2-3) web sites as we need them. These instances would be completely separate, so that if one web site were hacked it would not impact any other site. Typical hosting requirements: Linux Apache PHP 5 MySQL Supports Drupal Ability to setup a cron task (but we don't need SSH access) Daily backups Virtualized/cloud hosting (we want to avoid shared) Pricing per site is around $25/month OS is patched automatically Some options we have considered but won't work: MediaTemple: Two major data center-wide security incidents and recent downtime foster doubt about this host's technical ability. Slicehost: This would require us to manage the entire server, which we don't want to do. Rackspace Cloud Sites (formerly Mosso): No backup options. Do you have any recommended hosting options for given these requirements?

  Read the article

• Question about Displaying Documents and the CQWP in MOSS 2007

  - by Psycho Bob

  My organization is in the process of converting our intranet over to a SharePoint solution. Part of this intranet will be the movement and organization of all our internal documents. Currently, we have 11 pages of document links, each with its own subheadings. So far I have it set where each document has a custom field called "Page" with a check box list of all the document pages on the intranet site. On each individual page, I have setup a Content Query Web Part that displays the documents that have the corresponding Page value set (i.e. if a document Page value has been checked for "HR" it will appear on the HR page). The goal of this setup is to allow the nontechnical personal who will be responsible for the maintenance of the documents to be able to upload new documents to the documents list and note on which pages they should appear on without having to manually update the pages themselves. The problem that I am having is that I cannot seem to find a good way to sort the documents into their subheadings once they are on the appropriate page. I could create individual check boxes for each page/subheading combination, but this would create a list of approximately 50-75 items. Does anyone have any ideas as to how I could accomplish this, either via CQWP or by different means? Goals/Requirements of Installation Allow Intranet documents to be maintained by nontechnical personnel Display documents on the appropriate pages without user having to edit actual page or web part Denote document page location using user settable document attributes (if possible) Maintain current intranet organization and workflow Use only one document list without subdirectories NOTE: I am aware that this is not the most efficient or elegant way to do things, but these are the requirements I have been given for the project.

  Read the article

• Geographically distributed file system with preferred locality

  - by dpb

  Hi All -- I'm building a application that needs to distribute a standard file server across a few sites over a WAN. Basically, each site needs to write a lot of misc files of varying size (some in the 100s MB range, but most small), and the application is written such that collisions aren't a problem. I'd like to have a system set up that meets the following qualifications: Each site can store files in a shared "namespace". That is, all the files would show up in the same filesystem. Each site would not send data over the WAN unless necessary. I.e., there would be local storage on each side of the WAN that would be "merged" into the same logical filesystem. Linux & Free ($$$) is a must. Basically, something like a central NFS share would meet most of the requirements, however it would not allow the locally written data to stay local. All data from remote sides of the WAN would be copied locally all the time. I have looked into Lustre, and have run some successful tests with it, however, it appears to distribute files fairly uniformly across the distributed storage. I have dug through the documentation and have not found anything that automatically will "prefer" local storage over remote storage. Even something that went with the lowest latency storage would be fine. It would work most of the time, which would meet this application's requirements. Any ideas?

  Read the article

• Designing a software based load balancer

  - by Kishore pandey

  Hello to all Server fault users, I am new to this website but have constantly been using the mother website, stackover flow. Well to begin with, i would like to design a load balancer for the organization i am working for. As i am very new to this whole, idea about load balancing and networks. I am finding it very difficult to start my project. I did a lot of research on already existing load balancer and found some(HAPROXY,NGINX) that could solve my problems, but the point is, I am still in a dilemma if they could answer the following requirements of mine: The client and server in my architecture are distributed. The load balancer should take care of the firewall. LB server should balance the load among all servers present in WWW cloud. The LB server should have some sort of configuration file, with the help of which it is possible to configure the servers. Heart beat: With the help of which it would be possible to check if any server is down, if any server is down the request should be passed to some other server. Various load balancing algorithms of the incoming requests. Easy error handling. It should be fairly possible to prioritize the incoming requests. Is there any already available load balncer solution on the market that could satisfy these requirements? If not is there any base code available with the help of which i could develop my own load balncer. If not where should i start from scratch? I am practically new to everything. Any help from a load balancer expert is very much appreciated. Thanx a ton in advance. Cheers and regards. Kishore

  Read the article

• System State Backup Retention Policies

  - by isoscelestriangle

  I was wondering if there was a general consensus on how long to keep system state backups. I am trying to reevaluate our current backup process, and trying to get a good handle on our current storage requirements. Our current setup involves tapes and sending backups offsite with Barracuda Networks. We have been doing our system state backups with Barracuda now, which does full backups daily, leaving our storage requirements growing quite quickly. My boss is a little too gung-ho with backups and wants our system states saved for quite a while. We currently have 5 days of nightlies, 5 weeklies, 3 monthlies, and so on. I think this is quite overkill for system state backups. My boss wants the ability to go back in time to find when an issue appeared, but I don't think that is practical. Many things change in the course of several months. I also think it would be hard not to notice problems with our DCs and other servers for several months. I would think that a previous week's snapshot and the current week's dailies would suffice. Any advice or reading you can point me to? Thanks!

  Read the article

• Attaching 3.5" desktop drive to MacBook SATA

  - by Kyle Cronin

  I have a mid-2007 MacBook that, according to the Apple Store, has suffered some liquid damage and requires a new logic board to operate correctly, a ~$750 repair I've been told (would normally be around ~$300 were it not for the "liquid damage"). The unit itself works fine - the only problem I've been having is that the system does not recognize the battery and will not charge it. Curiously, the system can still be powered by the battery and even recognizes when the power cord is detached by diming the backlight, but I digress. Now that this laptop will likely become a desktop, I'm wondering if it might be possible to attach a desktop drive. I recently purchased a 2TB SATA drive and I'm wondering if it's possible to somehow attach it where the current internal drive connects. Obviously the drive itself will not fit inside the device, but as the unit will spend the rest of its days on my desk, that's not really much of an issue. My main questions are: Is this possible? If so, how would I connect the drive? Would a SATA extender cable work? Is the SATA port on my MacBook capable of powering a desktop drive? Or should I just get a SATA male-to-female cable and see if I can power the drive through other means (a cheap power supply, for example) The disk I'm referring to is the Hitachi Deskstar HD32000. Though I couldn't find that exact model on Hitachi's support site, these are the power requirements for a similar drive, the 7K2000 (2TB, 7200RPM, SATA II): Power Requirement +5 VDC (+/-5%) +12 VDC (+/-10%) Startup current (A, max.) 1.2 (+5V), 2.0 (+12V) Idle (W) 7.5 From what I've read, 2.5" drives require 5V, meaning that my MacBook obviously is capable of producing it. The specs seem to suggest that this drive seems capable of accepting it instead of the typical 12V - is this an accurate interpretation of the power requirements? Or does it need both 12V and 5V?

  Read the article

• Replacing DropBox with: Amazon S3 + SSL + GPG/TrueCrypt + Mounting on OSX ??

  - by Matt Rogish

  So, right now we're using DropBox to share various data files around between approximately 10 Mac OS X systems. However, we already have an S3 account and everyone on the lowest DropBox plan of $10/mo seems too expensive. So, I am contemplating something that would allow us to replace DropBox with our own home-grown solution. We are all fairly technical people and/or smart enough to follow some steps, so if it's not as "user friendly" as DropBox we're all comfortable with that. There are plenty of docs out there that have bits and pieces of what I want but some of the tools don't seem to fit the requirements: Transport security via SSL to the bucket Encryption of bucket contents Bi-directional syncing Most of the scripts I can find on the internet use "duplicity" which appears to fail #1 (it doesn't look like duplicity supports SSL to S3 - the docs don't state but the protocol looks plain old http http://www.nongnu.org/duplicity/duplicity.1.html#sect6 ) Many scripts use gpg to encrypt files. This seems like it could work, however I have to make sure that each OSX client is able to use the same key to encrypt and decrypt files (key management is left to me to manage). Finally, most of the scripts use one-way replication, e.g. using Amazon S3 as a simple backup store. As we'd be using Amazon S3 as the "repository" they fail this one. Whew. So, I'd love a single tool that does this but after an exhaustive search I don't think one exists. I'd be happy just knowing which tools out there can fulfill my 3 requirements, after that I can stitch together the rest. Any thoughts? THANKS!

  Read the article

< Previous Page | 46 47 48 49 50 51 52 53 54 55 56 57  | Next Page >