Search Results

Search found 2630 results on 106 pages for 'mount'.

Page 50/106 | < Previous Page | 46 47 48 49 50 51 52 53 54 55 56 57  | Next Page >

• Ubuntu Server - Power failure leads to boot failure

  - by Ali Nadalizadeh

  I have installed Ubuntu Server 10.04.1 LTS on an ext4 partition. Whenever my system looses power suddenly, It doesn't boot into the normal procedure to fix the problems automatically, but switches to the busy box shell (where it says Kernel Panic : No init found) So I guess kernel is refusing to mount the filesystem when it is not clean, since when I boot up using a Live CD and fsck it, it boots up correctly. How can I force kernel to mount the filesystem, even if it is not clean ?, so that automated fsck on system startup fixes the problems... (or it's a grub problem ?) K-V : 2.6.32-26-generic-pae #48-Ubuntu SMP

  Read the article

• NFS caching on Ubuntu

  - by stream

  We run a bunch of ubuntu servers (mostly 8.04 LTS) which all mount an nfs share at /nfs. We use the nfs primarily for two purposes: symlinking config files (such as apache vhosts) reading & writing uploaded files This all works great except it makes us fully dependent on the central NFS server (which is a DRBD cluster with heartbeat failover from primary to secondary, but we've still seen issues). What we'd like is if we could mount the NFS through some local caching layer which would make any file which had previously been read remain available even if /nfs isn't. Writes could be disabled for this period. Searching around it looks like cachefilesd may be an option. Unfortunately, it's only packaged for ubuntu 9.10 & 10.04 it looks like. I was also looking for a FUSE-based solution which might fit the bill, but hadn't found anything yet. Any suggestions would be greatly appreciated!

  Read the article

• TrueCrypt: Open volume without mounting

  - by Totomobile

  I have a corrupt TrueCrypt volume. When I try to mount it, the password is fine but I get an error: hdiutil attach failed no mountable file systems I read a post that says you can try to recover the volume, but I have to open it first to try to recover it. I just need to open it without TrueCrypt trying to mount it too, so I can use that partition in a data recovery program. Also it's just an image file volume. I am using the Mac version, and I have setup an alias for the truecrypt shell command, but I'm not sure how to enter the syntax! Please help. thank you! T

  Read the article

• TrueCrypt: Open volume without mounting

  - by Totomobile

  I have a corrupt TrueCrypt volume. When I try to mount it, the password is fine but I get an error: hdiutil attach failed no mountable file systems I read a post that says you can try to recover the volume, but I have to open it first to try to recover it. I just need to open it without TrueCrypt trying to mount it too, so I can use that partition in a data recovery program. Also it's just an image file volume. I am using the Mac version, and I have setup an alias for the truecrypt shell command, but I'm not sure how to enter the syntax! Please help. thank you! T

  Read the article

• How to determine source of file corruption for downloaded images?

  - by sunpech

  I've been downloading Visual Studio 2010 off of the Dreamspark.com website using Akamai Downloader. The .img file is 2.2 GB in size. I've downloaded it twice so far, and when I try to mount it using Gizmo, it complains that "the disk structure is corrupted and unreadable". The drive does mount, but it is unreadable. Is there a way to determine where the source of the data corruption is coming from? Is it my computer as it's receiving it? The hosting server(s)? My ISP? My router? My ethernet cable? It's a hefty download to do again and again from home, only to find out once it's fully downloaded that it's unreadable. I think I can almost rule out my PC, router, and ethernet cable, as I've been able to download various other files without corruption. Note: There is no checksum to verify against

  Read the article

• Apache has a 2GB file limit on a CIFS network drive?

  - by netvope

  Setup: A Windows and a Ubuntu Server are hosted in VMware ESXi I have a a 6GB file on a Windows share The Windows share is mount on Ubuntu with smbmount A symlink pointing to the 6GB file is created in a public_html directory, which is readable by Apache The problem: wget gets an error Connection closed at byte 2130706432. Retrying. after downloading 2130706432 bytes (exactly 2032 MiB, and is the same every time) Apache returns 206 Partial Content without showing any errors in the log Same error even if I download from localhost Similar error when Firefox is used instead of wget No error if I md5sum or cp the file on Ubuntu, suggesting that smbmount and the Windows Server are OK with 6GB files. No error if Apache serve a 6GB file from the local disk, suggesting that Apache has no problems handling 6GB files. Any ideas why Apache/symlink/smbmount/Windows would cause an error when used together? How can I fix the problem? Software used: VMware ESXi 4 Update 1 Windows Server 2008 R2 Ubuntu 8.04 Server, vmxnet3 Apache 2.2.8 mount.cifs 1.10-3.0.28a

  Read the article

• Permissions problem on mounting afp drive

  - by Ron Gejman

  I am trying to mount a network drive via AFP on an Ubuntu 10.04 server machine. After installing AFP support, I use the following command: sudo mount_afp afp://USER:[email protected]/directory/ /media/dir This seems to work and it tells me that mounting succeeded. However, when I navigate to /media/dir I get the following error: cd: cfs: Input/output error Permissions in /media are: d????????? ? ? ? ? dir/ drwx------ 12 user 4.0K 2010-10-25 16:08 otherdisk/ So there is a permissions problem here. I eventually want to mount this drive automatically using fstab. What do I need to do to make the disk accessible?

  Read the article

• ubuntu automount: only mounting drives as root?

  - by glisignoli

  I'm sharing the /mount dir with smb so users on my network can access use drives added to my linux box. Users are able to read files but not write, modify or delete files or directories. I'm using ubuntu 10.04 server edition with halevt installed for usb auto mounting. Afaik halevt is automounting the drives to /media/ but the drives are showing up as: drwxrwxr-x 1 root root 20480 2010-12-29 20:40 disk drwxrwxr-x 1 root root 24576 2010-12-21 17:20 Sparta mount gives me: /dev/sda1 on /boot type ext2 (rw) /dev/sdb1 on /media/disk type fuseblk (rw,nosuid,nodev,sync,allow_other,blksize=4096,default_permissions) /dev/sdc1 on /media/Sparta type fuseblk (rw,nosuid,nodev,sync,allow_other,blksize=4096,default_permissions) When I umount the drives, the folders /media/disk and /media/Sparta are both removed. I tried changing the permissions with chown to nobody:nogroup but it doesn't work (which I assume is because they are ntfs drives).

  Read the article

• Windows7 NFS with linux server

  - by Vitaly

  Hi. I have an Ubuntu server and want to access its web folder (/var/www). What I done: installed nfs-kernel-server, nfs-common and portmap (as in faq) Setted up /etc/exports: /var/www 192.168.1.0/255.255.255.0(rw,no_roow_squash,async,subtree_check) Then: sudo exportfs -ra Then: sudo /etc/init.d/nfs-kernle-server restart I checked, if all works on same machine: sudo 192.168.1.101:/var/www /mnt/test Then accessed /mnt/test and seen that all data present and all ok. Next, I tried to connect this folder to windows7 using NFS client: First, I checked, that linux exported path successfully: showmount -e 192.168.1.101 /var/www 192.168.1.0/255.255.255.0 All ok, go to mount: mount -o anon 192.168.1.101:/var/www z: Console said, that all success.. but. I cant access drive Z (drive exists in the system and point to right folder). When I try to access drive Z my Explorer just going to sleep and then say that timeout expired. Help me please.

  Read the article

• Chromebook, Crouton & “External Drive” is it possible to rename the folder?

  - by Cyril N.

  I have a Chromebook where I installed Crouton. I have plugged an SD Card and Chromebook detects it as "External Drive". In my Ubuntu instance, it's located at /media/removable/External Drive/ but this poses some problems for executing some applications I have installed on that external drive. In order to fix the problem, I need to remove all the spaces in the path, which is located in "External Drive". My question is simple, is it possible to move/rename the mount name "External Drive" to something else and doing it automatically at every mount/boot ? Thank you for your help !

  Read the article

• TrueCrypt with ext2/3 partition write access under Mac OS X Snow Leopard ?

  - by ssc

  I'm using a TrueCrypt volume with an ext3 partition under Snow Leopard with MacFUSE. I can mount ordinary (unencrypted) ext3 partitions read/write from the shell by adding command line arguments as shown in "Mounting ext3 in Snow Leopard…". However, TrueCrypt mounts the partition read-only and I don't see any way to 'sneak in' the required additional arguments. How do I mount it read/write? I was hoping for a similar solution as for mounting NTFS, but diskutil info /Volumes/my_volume/ does not return a UUID; it does tell me Read-Only Media: No Read-Only Volume: Yes though...

  Read the article

• mac osx active directory authentication and linux samba share problems.

  - by Matt Delves

  As a precursor, the network setup is one that includes a combination of Novell Netware servers as well as Windows Servers and Linux servers. I've successfully been able to bind my mac to the Windows Domain and can login without any problems. I've been able to mount shares without needing to resupply login credentials to any windows based share. The problem I've found is that when I'm attempting to mount a share from a linux server, it is asking to resupply the login credentials. Has anyone experienced this kind of problem. The linux servers are a combination of SLES 10 and 11 and RHEL 4 and 5. Thanks, Matt

  Read the article

• autofs mac os x afp not loading as correct user?

  - by Stephen Furlani

  Hello, I am way out of my depth, and I am trying to get all of my nodes on a cluster to mount a drive on my head node. I've got /etc/auto_master and /etc/auto_afp configured according to Apple's "Autofs: Automatically Mounting Network File Shares in Mac OS X" White Paper: /etc/auto_master +auto_master # Use directory service /net -hosts -nobrowse,hidefromfinder,nosuid /home auto_home -nobrowse,hidefromfinder /Network/Servers -fstab /- -static /- auto_afp /etc/auto_afp /Volumes/userA -fstype=afp afp://userA:[email protected]:/ /Volumes/userB -fstype=afp afp://userB:[email protected]:/ I am logged into a compute-node as userA. automount appears to mount both /Volumes/userA and /Volumes/userB to head-node.local:/Users/userA/Documents/ even though I have usernames, passwords, and user-directory specified in the afp url. If I go and login with Finder - it mounts userB appropriately. File sharing and cd/dvd sharing is enabled on all computers involved. Am I doing the right thing, and if so, what did I do wrong? -Stephen

  Read the article

• How to automount SMB shared network drives in Mac OS X Lion

  - by cyppher

  In Mac OS X 10.7 (Lion) Apple has replaced good old SMB support. Now I can't auto connect to my shared (SMB) network drives. Workarounds? Or Impossible? In OS X Snow Leopard, I could automatically connect my Ubuntu (SMB) shared network drives with auto_smb / auto_master (autofs configuration in /private/etc/). I made three mount points (folders) directly in '/Volumes', I used /Volumes/Data and /Volumes/webroot (both SMB shared). Unfortunately Lion doesn't connect (automount) my network drives. I have to manually connect to the server (Ubuntu file server) in Finder, then open up Terminal to navigate to the mount points, and then it connects. This is not a workable solution. I've searched (Google/SO) but found no solutions apart from an unsupported hack. Isn't it possible any more to automatically connect to an SMB-shared drive during startup?

  Read the article

• connection refused with nfs server.

  - by someguy

  Hi All, I have an issue with NFS. I have two rhel4 servers. sys1 and sys2. I have a directory exported from sys1 and sys2 is the nfs client trying to access the mount. I'm able to mount, but after a certain amount of time I get "RPC: Remote system error: Connection refused." and then I restart nfs services, quotas, deamon, mountd and lockd. Then it works fine again. Any way to fix this. Thanks.

  Read the article

• rsync chown warning

  - by Ted Kim

  I try to sync two directories using rsync. the source is on Linux, and the other is on windows. So, I mount the directory on windows using the command mount -t cifs ..... in Linux system. Then I execute rsync .... Everything is OK, but rsync prints out rsync: chown "/mnt/windows/A/." failed: Permission denied (13) rsync: chown "/mnt/windows/A/readme.txt" failed: Permission denied (13) I want to sync the directories without changing ownership. How can I do? please let me know. Thanks in advance.

  Read the article

• Can't launch Oneiric x64 instance on Eucalyptus

  - by Bruno Reis

  EDIT: after many hours, I've found out that the problem has nothing to do with Eucalyptus. It looks like the image is buggy. Very, very buggy. More details in the end. I didn't manage to fix it, and I will file a bug. EDIT 2: I managed to fix it, it apparently works. I have a 4-machine cluster running Ubuntu Server Natty (11.04) x64. I've installed "Ubuntu Enterprise Cloud" from the installtion CD (then updated it) on each of these machines. The cloud seems to work fine, I have lots of virtual machines running Natty servers on them. Now I'd like to run Oneiric in a virtual machine, but somehow I can't. I downloaded Oneiric's (x64) image from http://cloud-images.ubuntu.com/oneiric/current/, published it (uec-publish-tarball oneiric-server-cloudimg-amd64.tar.gz oneiric-server-cloudimg-amd64) exactly as I did with Natty, then tried to launch an instance (euca-run-instances -n 1 -k my-key -t m1.small -z my-cloud emi-XXXXXXXX) using Oneiric's image, but the instance is not able to boot. With euca-get-console-output I get the following: [ 0.461269] VFS: Cannot open root device "sda1" or unknown-block(0,0) [ 0.462388] Please append a correct "root=" boot option; here are the available partitions: [ 0.463855] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 0.465331] Pid: 1, comm: swapper Not tainted 3.0.0-13-generic #22-Ubuntu [ 0.466526] Call Trace: [ 0.466989] [<ffffffff815d3ee5>] panic+0x91/0x194 [ 0.467860] [<ffffffff81ad1031>] mount_block_root+0xdc/0x18e [ 0.468891] [<ffffffff81ad126a>] mount_root+0x54/0x59 [ 0.469829] [<ffffffff81ad13dc>] prepare_namespace+0x16d/0x1a7 [ 0.470883] [<ffffffff81ad0d76>] kernel_init+0x140/0x145 [ 0.471837] [<ffffffff815f38e4>] kernel_thread_helper+0x4/0x10 [ 0.472889] [<ffffffff81ad0c36>] ? start_kernel+0x3df/0x3df [ 0.473884] [<ffffffff815f38e0>] ? gs_change+0x13/0x13 The filesystem is labeled "cloudimg-rootfs", inside the image both /etc/fstab and /boot/grub/grub.cfg always refer to the image by the label, everything seems to be correct, yet the kernel says it can't find the root file system. I've spent many hours googling, but nothing came out. I've asked on #ubuntu-server, but nobody knew what to do. I've asked on #eucalyptus but got no answer at all. Any ideas on why this is happening and how to solve it? Thanks EDIT: after many hours, I've found out that the problem has nothing to do with Eucalyptus. It looks like the image is buggy. Very, very buggy. The first problem is that the Kernel in the image is a -generic kernel, while I suppose it should be a -virtual one. I chrooted into the image, removed the -generic packages, replaced it with the -virtual ones. Then I extracted the new kernel (and replaced the original one (-generic) that came with the tarball) because I need it when I publish and launch an image with Eucalyptus. The problem described above was solved. But then, the console started showing this: mount: mount point ext4 does not exist If you check the /etc/fstab file in the image, it says: LABEL=cloudimg-rootfs ext4 defaults 0 1 Damnt, where's my mount point? Note that it is missing /proc as well. Well, when you think it is over, you will notice that your instance will have no network connectivity. Let's check /etc/network/interface: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback Oh my! It is missing eth0... here I stopped. I can't take no more. I give up. Looks like Canonical has just forgotten to properly set up this image. At first, I though: "have I downloaded a server image by mistake?", but no, I double checked. It is really the cloud image, it has even "cloud-init" installed (which is not, by default, on server images). They just forgot to prepare it. I will file a bug (and reference it here once this is done), and hope they fix it soon! EDIT 2: it looks like the network configuration was the last thing missing. I decided to test it with the fixes above, and it booted properly! However, I haven't got the slightest idea if the image is now good to go...

  Read the article

• Data Recovery needed with a Sector Zero problem on a HDD

  - by Jay Robins

  Left my computer (running XP) copying files to an external drive. Came back a few hours later, and the laptop was pretty hot and had frozen (Ironic aint it). Forced a reboot, and the laptop HDD hasnt worked since. Set it up in an external enclosure, but XP cant mount the HDD to a drive letter, but is able to recognize the manufacturer and drive size (Hitachi-320GB). No noise or rattling when the drive is spinning, but I cant get anything off of it, since i cant mount it, or see much of anything. Computer repair shop ran some software tests and says it came back with a "Zero Sector bad" message, and need to send it to a professional data recovery service. Any other options or ideas, before I have to spend thousands of dollars to recover my data? Any help would be GREATLY appreciated!!! I'm desperate and a poor student! Thanks in Advance, -Jay

  Read the article

• Netboot Debian (wheezy) from NFS v4

  - by bara

  Is it possible to boot Debian Wheezy from NFS v4? Bootwing with NFS v3 works just fine. NFS v4 not. This is in my /etc/exports: /nfs 192.168.100.0/24(ro,sync,insecure,no_root_squash,no_subtree_check,fsid=0) /nfs/root 192.168.100.0/24(ro,nohide,sync,insecure,no_root_squash,no_subtree_check) /nfs/root/www contains the root of the webserver. The commandline is: rootfstype=nfs4 root=/dev/nfs4 nfsroot=192.168.100.1:/root/www fails with mount call failed - server replied: Permission denied. Mounting from the busybox in the initrd fails: mount -t nfs4 192.168.100.1:/nfs/root/www /root mounting .. failed: Invalid argument Do I need to modify the initrd?

  Read the article

• Wall jacks to patch panel?

  - by rj454me

  OK, I'm by no means a seasoned networking pro and I had no say so in the design of our current server room which is in dire need of an extreme makeover. Basically, in our server room we have 12 wall plates with 4 RJ-45 ports on each - 48 total RJ-45 ports. From these 48 ports is a spaghetti bowl of network cables feeding our servers located in a rack - there is no patch panel currently, just straight from the wall jack to each server. What I was wondering is, is it feasible to mount a 48 port patch panel in our server rack and feed into this patch panel from the wall jacks (of course nicely routing this cable through some new cable trays)? We really don't have the funds to mount the patch panel and have it fed directly from the switches in the telcom closet which is several hundred feet away. Current: Switch (Telcom Closet) - Wall Jacks - Servers Proposed: Switch (Telcom Closet) - Wall Jacks - Patch Panel - Servers

  Read the article

• Creating a USB stick for installing centos 6.x using DVD1 and DVD2 iso files

  - by user250563

  First, we create 2 partitions on the USB stick that is let's say 16GB. first partition is let's say only 1GB and the second partition is the rest of what is available. after we "w" write the changes, the USB now has 2 partitions. 1 is 1GB 1 is more than 14GB so , we have... sdb1 and sdb2 now. now we need to turn these partitions into filesystems some say i should run these commands after those procedures. mkfs.vfat -F 32 /dev/sdb1 mkfs.ext3 /dev/sdb2 but some web pages recommend using: mkfs.vfat -n BOOT /dev/sdb1 mkfs.ext2 -m 0 -b 4096 -L DATA /dev/sdb2 which is it? so let's say the DVDs are called: CentOS-6.4-x86_64-bin-DVD1.iso CentOS-6.4-x86_64-bin-DVD2.iso so we make a directory: mkdir -p /mnt/dvd1 and then mount it: mount -o loop CentOS-6.4-x86_64-bin-DVD1.iso /mnt/dvd1 and i suppose we don't make a directory for dvd2 and we don't have to mount it ? at this point i do not know what should be done. but i think this step might be next: we make the USB bootable by finding the file named mbr.bin and then moving it to there via these commnad. dd conv=notrunc bs=440 count=1 if=/usr/lib/syslinux/mbr.bin of=/dev/sdb parted /dev/sdb set 1 boot on in other words we are "dd-ing it to 'sdb' not sdb1' or 'sdb2'. and then we use parted to set the boot to on for sdb so far everything looks good? here is the confusing parts.. how exactly do i move these iso files to the usb drive? EVERYTHING BELOW IS A GUESS. so at this point i should copy the folder /mnt/dvd1/isolinux to usb's sdb1 or sdb2 ? rename it to syslinux ? and then inside this syslinux folder there will be a file called... isolinux.cfg ? which should be renamed to syslinux.cfg ? and then copy the contents of /mnt/dvd1/images/* to USB's sdb2 ? but i think i am also suppose to copy and paste the both CentOS-6.4-x86_64-bin-DVD1.iso CentOS-6.4-x86_64-bin-DVD2.iso somewhere into this USB's sdb2 partition, correct ? almost like a drag and drop kind of a thing? or do they go into any folders ? centos' own web site has some instructions but those instructions do not work. http://wiki.centos.org/HowTos/InstallFromUSBkey i once got this working but things got ruined, i have to do it again and this time take notes.

  Read the article

• Mounting to external NFS from a KVM VM.

  - by jbfink

  I've got a machine acting as a KVM host and another machine that NFS exports to that KVM host. I'd like for one of the internal VMs on the KVM host to be able to mount the NFS share. I can export to the KVM host IP fine and do a mount, but it doesn't work for the internal VM; I just get a failed error with "reason given by server: Permission denied". I've already tried to re-export the NFS from host to VM, but apparently doing two levels of NFS is not a Good Idea. Anyone know how I might get this working?

  Read the article

• Bypass a licence agreement when mounting a DMG on the command line

  - by Vitaly Kushner

  I'm automating my Mac installation using puppet. As a part of it I need to install several programs that come in a .dmg format. I use the following to mount them: sudo /usr/bin/hdiutil mount -plist -nobrowse -readonly -quiet -mountrandom /tmp Program.dmg The problem is that some .dmg files come with a license attached, and so script is stuck accepting the license. (There is no stdin/out when running with puppet, so I can't manually approve it to continue.) Is there a way to pre-approve or force-approve the license?

  Read the article

• DVD ROM is not working

  - by Cyril N.

  (note: I don't know in which StackExchange site to put this question, I'll thank the moderator that will move it to a more appropriate place, if there is a S.E. available for my question). I have a DVD RW drive that is well listed in the bios, and if no CD is in, it is also present in the "My Computer" of my Fedora 16. But when I put a disc on it, the icon disapear from "My Computer", and I can not do anything with this ! (Like erasing a RW disc). I'd like to boot a Fedora 17 Live CD image. I burned it on an other computer but when I try to run it in bios, nothing is done and I'm redirected to Grub of my HD. The command cdrecord -scanbus shows this : wodim: Warning: controller returns wrong size for CD capabilities page. wodim: Cannot get CD capabilities data. 6,1,0 601) 'HD-DT%ST' 'DVD%RAM G@22NP20' '1&04' Removable CD-ROM And when I try to mount manually the disc, I got this error : mount: block device /dev/sr0 is write-protected, mounting read-only mount: /dev/sr0: can't read superblock Here's a paste of dmesg | grep sr0 : [ 5.161265] sr0: scsi-1 drive [ 5.161621] sr 6:0:1:0: Attached scsi CD-ROM sr0 [ 834.545978] sr0: Hmm, seems the drive doesn't support multisession CD's [ 841.731194] sr0: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [ 842.021640] sr 6:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 842.021652] sr 6:0:1:0: [sr0] Sense Key : Aborted Command [current] [ 842.021662] sr 6:0:1:0: [sr0] Add. Sense: No additional sense information [ 842.021672] sr 6:0:1:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00 [ 842.021688] end_request: I/O error, dev sr0, sector 0 [ 842.021697] Buffer I/O error on device sr0, logical block 0 [ 842.023715] sr 6:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 843.048203] sr 6:0:1:0: [sr0] Sense Key : Aborted Command [current] [ 843.048211] sr 6:0:1:0: [sr0] Add. Sense: No additional sense information [ 843.048219] sr 6:0:1:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 843.048234] end_request: I/O error, dev sr0, sector 0 [ 843.048274] EXT4-fs (sr0): unable to read superblock [ 843.063155] sr0: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [ 843.075904] sr0: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [ 843.220512] sr 6:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 843.220522] sr 6:0:1:0: [sr0] Sense Key : Aborted Command [current] [ 843.220530] sr 6:0:1:0: [sr0] Add. Sense: No additional sense information [ 843.220538] sr 6:0:1:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 843.220553] end_request: I/O error, dev sr0, sector 0 [ 843.220609] FAT-fs (sr0): unable to read boot sector The lines from Sense Key .. (line 6) to DRIVER_SENSE (line 11) are repeating a lot. I then changed my DVD player with an other spare one I had, and the disc didn't boot neither. I then changed the IDE cable, but still no success. What can I do to make it work? Thanks for your help.

  Read the article

• Recovery files from a damage VM?

  - by ejlml

  After search and search again, my VM still can't recovery. Does somebody know how to retrieve the files from the VM? My VM is XP, it can't boot up anymore after my forced quit. In the Mac OS 10.6.2, I try to "get info" the VM file, I can see it is still using 25G space. I try to mount it with VMDK mounter (just right click the VM file and chose open with), it can mount but nothing inside. I also try to use filesalvage to recovery the files after mounted the VM, it can recovery many many files, but the files name and some document become to be symbol. What can I do now? Pls help me, thanks!

  Read the article

< Previous Page | 46 47 48 49 50 51 52 53 54 55 56 57  | Next Page >