Search Results

Search found 18369 results on 735 pages for 'myers network'.

Page 50/735 | < Previous Page | 46 47 48 49 50 51 52 53 54 55 56 57  | Next Page >

• Use wired LAN adapter by default

  - by Frantumn

  I am trying to find out if there's a way to set up network adapters so that if 2 are connected with network and internet access it will choose one over the other. Scenario: I have seen several computers running Windows 7 or Windows 8 where you are connected to a wireless network, working perfectly. Then when you plug in an Ethernet cable, it still shows the network icon in the taskbar as wireless. I would like to have my computer set up so that if there's an Ethernet cable plugged in, it uses that, and not the wireless adapter. 1) Is this possible / How? 2) Why does it stay on wireless over wired when given the option for both?

  Read the article

• HTTP Protocal

  I have worked with the HTTP protocal for about ten years now and I have found it to be incredibly usefull for transfering data espicaly for remote systems and regardless of the network enviroment. Prior to the existance of web services, developers use to use HTTP to screen scrap data off of web pages in order to interact with remote systems, and then process the data as they needed. I use to use the HTTPWebRequest and HTTPWebRespones classes in order to screen scrap data from various sites that had information I needed to use if no web service was avalible. This allowed me to call just about any webpage and grab all of the content on the page. Below is piece of a web spider that I build about 5-7 years ago. The spider uses the HTTP protocal to requst webpages and then parse the data that is returned.  At the time of writing the spider I wanted to create a searchable index of sites I frequented. // C# 2.0 Framework// Creating a request for a specfic webpageHttpWebRequest webreq = (HttpWebRequest)WebRequest.Create(_Url); // Storeing the response of the webrequestwebresp = (HttpWebResponse)webreq.GetResponse(); StreamReader loResponseStream = new StreamReader(webresp.GetResponseStream()); _Content = loResponseStream.ReadToEnd(); // Adjust the Encoding of Responsestring charset = "";EncodeString(ref _Content, ref charset);loResponseStream.Close(); //Parse Data from the Respone_Content = _Content.Replace("\n", "");_Head = GetTagByName("Head", _Content);_Title = GetTagByName("title", _Content);_Body = GetTagByName("body", _Content);

  Read the article

• network manager says "device not managed"

  - by Daniella Glover

  I used to be able to share my network connection by editing the Auto Eth0 to share with other computers in the Ipv4 section and now I upgraded my laptop to 11.10 . Now are there no wired connections in the network manager. When I click my connections applet at the top of the tray it also says wired device not managed! when I type ifconfig -a daniella@daniella-1001HA:~$ ifconfig -a eth0 Link encap:Ethernet HWaddr 90:e6:ba:83:d6:fc UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:45 eth0:avahi Link encap:Ethernet HWaddr 90:e6:ba:83:d6:fc inet addr:169.254.13.40 Bcast:169.254.255.255 Mask:255.255.0.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 Interrupt:45 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) wlan0 Link encap:Ethernet HWaddr 00:25:d3:90:43:41 inet addr:192.168.0.6 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::225:d3ff:fe90:4341/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:12881 errors:0 dropped:0 overruns:0 frame:0 TX packets:12867 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:8851081 (8.8 MB) TX bytes:2343199 (2.3 MB)

  Read the article

• Class hierarchy problem in this social network model

  - by Gerenuk

  I'm trying to design a class system for a social network data model - basically a link/object system. Now I have roughly the following structure (simplified and only relevant methods shown) class Data: "used to handle the data with mongodb" "can link, unlink data and also return other linked data" "is basically a proxy object that only stores _id and accesses mongodb on requests" "it looks like {_id: ..., _out: [id1, id2,...], _inc: [id3, id4, ...]}" def get_node(self, id) "create a new Data object from the underlying mongodb" "each data object can potentially create a reference object to new mongo data" "this is needed when the data returns the linked objects" class Node: """ this class proxies linking calls to .data it includes additional network logic operations whereas Data only contains a basic database solution """ def __init__(self, data): "the infrastructure realization is stored as composition by an included object data" "Node bascially proxies most calls to the infrastructure object data" def get_node(self, data): "creates a new object of class Object or Link depending on data" class Object(Node): "can have multiple connections to Link" class Link(Node): "has one 'in' and one 'out' connection to an Object" This system is working, however maybe wouldn't work outside Python. Note that after reading links Now I have two questions here: 1) I want to infrastructure of the data storage to be replacable. Earlier I had Data as a superclass of Node so that it provided the neccessary calls. But (without dirty Python tricks) you cannot replace the superclass dynamically. Is using composition therefore recommended? The drawback is that I have to proxy most calls (link, unlink etc). Any thoughts? 2) The class Node contains the common method .get_node which is used to built new Object or Link instances after reading out the data. Some attribute of data decided whether the object which is only stored by id should be instantiated as an Object or Link class. The problem here is that Node needs to know about Object and Link in advance, which seems dodgy. Do you see a different solution? Both Object and Link need to instantiate one of all possible types depending on what the find in their linked data. Are there any other ideas how to implement a flexible Object/Link structure where the underlying database storage is isolated?

  Read the article

• Access points fighting for dominance?

  - by Phillip Oldham

  We have a small office with a large number of wireless devices (a mixture of desktop machines, laptops, and wifi-enabled phones) all working from a single Apple Airport Extreme which extends our wired network. I've added another Airport Extreme for resiliency, since we've been seeing a decrease in performance and (as far as I understand) access points can only handle a small number of clients. I set the new AP to extend the current network so that the clients weren't constantly switching between different wireless networks, however as soon as this AP was configured all the wireless devices started seeing network trouble, flicking on and off. I'm assuming that this is because both APs are reasonably strong, and the client can't decide which to use. What is the best route to follow to resolve this? What I'm aiming for is wireless resiliency; preferably having two APs share the network load, or if this isn't an option then having a primary AP with a "fail-over", should the primary go down for any reason.

  Read the article

• How to use a home network patch panel?

  - by Torben Gundtofte-Bruun

  I'm planning a home network in a house that's not built yet. One recommendation is to add network sockets in various rooms and have them all end in a central place, where it all connects using a network switch. So far so good. Another recommendation says to not connect everything directly to the switch, but to a patch panel which in turn is connected to the switch. I'm unsure why this is good. Is there any practical advantage of using a patch panel if you're not planning to re-wire things very often? How does a patch panel actually work? Let's say it has 24 ports. Does it have another 24 ports on the backside that go to the switch, or what? Wikipedia isn't helpful on this. Clarification: I am planning to run network cables through conduits inside the walls and terminated with network sockets in the wall (as opposed to having just conduits and long regular network cables that have a normal plug in each end). Going by RedGrittyBrick's answer, a patch panel is nearly unavoidable in that case.

  Read the article

• API Class with intensive network requests

  - by Marco Acierno

  I'm working an API which works as "intermediary" between a REST API and the developer. In this way, when the programmer do something like this: User user = client.getUser(nickname); it will execute a network request to download from the service the data about the user and then the programmer can use the data by doing things like user.getLocation(); user.getDisplayName(); and so on. Now there are some methods like getFollowers() which execute another network request and i could do it in two ways: Download all the data in the getUser method (and not only the most important) but in this way the request time could be very long since it should execute the request to various urls Download the data when the user calls the method, it looks like the best way and to improve it i could cache the result so the next call to getFollowers returns immediately with the data already download instead of execute again the request. What is the best way? And i should let methods like getUser and getFollowers stop the code execution until the data is ready or i should implement a callback so when the data is ready the callback gets fired? (this looks like Javascript)

  Read the article

• Problems with microphone and network

  - by AnoonymoouS

  Hello... very good day everybody! I'm having some problems regarding the Ubuntu 12.4.01 LTS. For this reason, cordially i ask everyone's help. Such problems can be summed up in network (01) and audio (02)! 01) I can not set a DSL network settings in the "upper bar" (on side the clock). When i create the connection, the system says that the cables modem are disconnected! I can only use the internet if i set up a connection at terminal through the command "pppoeconf". Follows the print screen of what i mentioned above:. http://i.imgur.com/8nTrF.png Obs.: Note that even after the connection "created", it does not appear there! 02) The sound is reproduced; however, can not be captured! I can not make recordings, obviously i can't use the microphone. I believe that something is giving interference or the settings are wrong! Follows the video of what i mentioned above:. http://dl.dropbox.com/u/41085750/Projeto%20Padr%C3%A3o.mp4 Obs.: I'm listening to music, so that interference errors may appear in the video. By kindness; who can help me... help me! I sought help at various sites and forums but unfortunately, i did not get success. I wait anxiously for a direction. Regards, Anoonymoous.

  Read the article

• Software vs Network Engineer (Salary, Difficulty, Learning, Happiness)

  - by B Z

  What are your thoughts on being a Software Engineer vs a Network Engineer? I've been on the software field for almost 10 years now and although I still have a great deal of fun (and challenges), I am starting to think it could be better on the "other" side. Not to degrade network engineers (i know there are many great ones out there), it seems (in general) their job is easier, the learning curve from average to good is not as steep, job is less stressful and pay is better on average. I think as software developer I could make the switch to networking and still enjoy working with computers and feel productive. I spend an enormous amount of time learning about software, practices, new technologies, new patters, etc...I think I could spend a much smaller amount of time learning about networking and be just as "good". What are your thoughts? EDIT: This is not about making easy money. Networking and Software are closely related, I love computers and programming, but if I can work with both, make more money and have less stress in my life and can spend more time with my family, then I am willing to consider a change and hence I am looking for advice that Do or Don't support this view.

  Read the article

• Wake-on-lan only works so many times

  - by Chance

  I have Wake-on-lan configured on my Windows XP machine so that the computer will wake up from Standby. Waking the computer from Standby via network traffic seems to work a certain number of times, say 4 or 5, then it stops working. If I restart the computer it seems to reset this behavior so that I can use WOL a few more times before it starts working. I use the command "wol" on my other, Linux machine with the appropriate IP address and MAC address of the card. I looked at the network card to see if it had different lights when WOL worked and when it didn't. When it has a solid amber light where the ethernet cable connects, WOL seems to work. When it has a flashing amber light, WOL does not. It seems that the system seems to almost "shut off" the card when it falls to sleep, but I don't know if this is a function of time or number of standby/wakeups. I have a 3Com 3c920 network card. If I look at the properties in Device Manager, I have "Allow this Device to bring the Computer out of Standby" checked. In the Advanced tab I have anything related to RWU (Remote Wake Up) enabled. I also believe I have the appropriate settings in BIOS related to Remote Wake-Up and I have tried both S1 and S3 power configurations in the BIOS. Intuitively, I would think I would uncheck "Allow the Computer to turn off this device to save power", but doing so disables the "Allow this Device to bring the Computer out of Standby" option. Does anyone know what is happening here or if there is a way to fix it? I have an integrated network card; would getting one that goes into a slot be better? I am running Windows XP on a Dell Optiplex GX240 with a 3Com 3c920 network card.

  Read the article

• System wide Proxy settings when on a windows network with a password

  - by sav

  I'm using Ubuntu on a windows network. I want to connect to the world wide web. I have followed the steps here which I have found very useful. However when I try to ping a website (eg: ping www.wikipedia.org) I get no reply. I can ping local computers on my network, but I need to go through our proxy to get to the world wide web. I can even browse wikipedia using firefox, I just needed to enter the proxy configuration script location and my username and password. I'm quite sure the reason I'm having this trouble is because I havn't entered a username and password. I'm not sure how to do this on a system wide level. ultimately I would like to be able to use package managers like synaptic but first I need them to be able to connect to the internet. EDIT As sugested I created a /etc/apt/apt.conf file like Acquire::http::Proxy "http://chrisav:[email protected]:8080"; Acquire::https::Proxy "https://chrisav:[email protected]:8080"; Acquire::ftp::Proxy "ftp://chrisav:[email protected]:8080"; Acquire::socks::Proxy "socks://chrisav:[email protected]:8080"; However I still cant ping wikipedia when I try installing stuff I get chris@chris-Ubuntu:~$ sudo apt-get install kate Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package kate

  Read the article

• Does anyone know how to "tcpdump" traffic decrypted by Mallory MITM? [migrated]

  - by chriv

  I'm looking for some help in capturing network traffic that I can analyze in Wireshare (or other tools). The tool I'm using is mallory. If anyone is familiar with mallory, I could use some help. I've got it configured and running correctly, but I don't know how to get the output that I want. The setup is on my private network. I have a VM (running Ubuntu 12.04 - precise) with two NICs: eth0 is on my "real" network eth1 is only on my "fake" network, and is using dnsmasq (for DNS and DHCP for other devices on the "fake" network) Effectively eth0 is the "WAN" on my VM, and eth1 is the "LAN" on my VM. I've setup mallory and iptables to intercept, decrypt, encrypt and rewrite all traffic coming in on destination port 443 on eth1. On the device I want intercepted, I have imported the ca.cer that mallory generated as a trusted root certificate. I need to analyze some strange behavior in the HTTPS stream between the client and server, so that's why mallory is setup in between for this MITM. I would like to take the decrypted HTTPS traffic and dump it to either a logfile or a socket in a format compatible with tcpdump/wireshark (so I can collect it later and analyze it). Running tcpdump on eth1 is too soon (it's encrypted), and running tcpdump on eth2 is too late (it's been re-encrypted). Is there a way to make mallory "tcpdump" the decrypted traffic (in both directions)?

  Read the article

• Virtual IPv6 Network between VirtualBox VMs

  - by Ben

  I'm trying to create a virtual IPv6 network as a test environment. I have 5 VirtualBox VMs (Ubuntu Server) with network adapters using host-only networking. You can imagine them being connected in series and every machine connects 2 subnets. I want to ping the last machine from the first one: On: 2001:db8:aaaa::100 I want to ping 2001:db8:dddd::101 (Note: there is no cccc network in between) Only static configuration and routes are used: /etc/network/interfaces auto eth0 iface eth0 inet6 static address 2001:db8:aaaa::100 netmask 64 /etc/network/interfaces auto eth0 iface eth0 inet6 static address 2001:db8:aaaa::101 netmask 64 auto eth1 iface eth1 inet6 static address 2001:db8:bbbb::100 netmask 64 up ip -6 route add 2001:db8:dddd::/64 via 2001:db8:bbbb::101 dev eth1 down ip -6 route del 2001:db8:dddd::/64 via 2001:db8:bbbb::101 dev eth1 I thought there might be some automatic route discovery going on. Anyway, ping6 2001:db8:dddd::100 will not work from aaaa::100 When I add the route: ip -6 route add 2001:db8:dddd::/64 via 2001:db8:aaaa::101 it will work. But the next interface in the same network dddd::101 is not reachable. How could that be? There is a machine with an interface bbbb::101 and another dddd::100 and I can ping the latter one, but the machine connected to it, dddd::101 not?? I also have also turned on forwarding. Any ideas?

  Read the article

• Serializing network messages

  - by mtsvetkov

  I am writing a network wrapper around boost::asio and was wondering what is a good and simple way to serialize my messages. I have a message factory which can take care of dispatching the data to the correct builder, but I want to know if there are any established solutions for getting the binary data on the sender side and consequently passing the data for deserialization on the receiver end. Some options I've explored are: passing a pointer to a char[] to the serialize/deserialize functions (for serialize to write to, and deserialize to read from), but it's difficult to enforce buffer size this way; building on that, I decided to have the serialize function return a boost::asio::mutable_buffer, however ownership of the memory gets blurred between multiple classes, as the network wrapper needs to clean up the memory allocated by the message builder. I have also seen solutions involving streambuf's and stringstream's, but manipulating binary data in terms of its string representation is something I want to avoid. Is there some sort of binary stream I can use instead? What I am looking for is a solution (preferrably using boost libs) that lets the message builder dictate the amount of memory allocated during serialization and what that would look like in terms of passing the data around between the wrapper and message factory/message builders. PS. Messages contain almost exclusively built-in types and PODs and form a shallow but wide hierarchy for the sake of going through a factory. Note: a link to examples of using boost::serialization for something like this would be appreciated as I'm having difficulties figuring out the relation between it and buffers.

  Read the article

• Unable to view 2 local sites over network

  - by gentrobot

  I have 2 websites running on my local machine that I'd like to view from other machines on the same network. For /etc/apache2/sites-available/site1.com: <VirtualHost *:80> ServerName site1.com DocumentRoot /var/www/answers/app/webroot DirectoryIndex index.php <Directory "/var/www/answers/app/webroot"> Options FollowSymLinks AllowOverride All Order allow,deny Allow from all </Directory> </VirtualHost> For /etc/apache2/sites-available/site1.com: <VirtualHost *:80> ServerName site2.com DocumentRoot /var/www/answers2/app/webroot DirectoryIndex index.php <Directory "/var/www/answers2/app/webroot"> Options FollowSymLinks AllowOverride All Order allow,deny Allow from all </Directory> </VirtualHost> I have added 2 entries in the /etc/hosts file as: 127.0.0.1 site1.com 127.0.0.1 site2.com Now, when I point the browser on my machine to site1.com, it shows me the first site and pointing the browser to site2.com, it shows me the second site. However,when I type in the local IP of my machine in the browser, it always shows site2. How can I change it to switch between site1 and site2 ? Is there a way that I can view both the sites form another machine (esp. mobile devices over wireless network) ?

  Read the article

• How to Monitor Network in Medium-Sized Company?

  - by Kyle Lowry

  I work at a medium sized company (100+ employees). An issue that has been cropping up is network performance, internet access in particular. We have about 70 or more computers, a mix of Mac OS X and Windows XP & 7 machines. We have several servers (Exchange server, PC file servers, MS SQL, Blackberry, FTP, Mac server, etc). There are four main switches, a SonicWall firewall, and probably a couple routers in the server room with a dozen or so more scattered around the building. The network structure has grown organically over a number of years; and, as far as I know, there really isn't a monitoring solution in place. When we experience network issues (slow connections, dropped packets, and so on), our general solution is to power cycle some hardware or go around to each employee and ask them if they are uploading/downloading any large files. This is really inefficient and time consuming, and it does not allow us to monitor the network, tackling potential problems proactively. I would like to find a solution that would allow me to monitor network usage company-wide in real time, with detail going down to the individual computer, ideally. Given the hodgepodge of equipment and operating systems, what would be the best way to set up some kind of monitoring solution? Hardware, software, restructuring our network architecture?

  Read the article

• Choosing the correct network protocol for my type of game (its Wc3 Warlock style)

  - by Moritz

  I need to code a little game for a school project. The type of the game is like the Warcraft 3 map "Warlock", if anyone doesnt know it, here is a short description: up to ten players spawn into an arena filled with lava, the goal of each player is to push the other players into the lava with spells (basically variations of missiles, aoe nukes, moba spells etc) http://www.youtube.com/watch?v=c3PoO-gcJik&feature=related we need to provide multiplayer-support over the internet, for that reason I am looking for the best network protocol for this type of game (udp, tcp, lock step, client-server...) what the requirements are: - same/stable simulation on all clients - up to ten players - up to ~100 missiles on the field - very low latency since its reaction based (i dont know the method wc3 used, but it was playable with the old servers) what would be nice (if even possible, since the traffic might be too big): - support for soft bodies over the network (with bullet physics), but this is no real requirement I read several articles about the lock step method used for RTS games, this seems to be great, but does it fit for real-time action games too (ping-related)? If anyone has run into the same problems/questions like me, I would be very happy about any help

  Read the article

• Xen HVM Windows 2008 network bridge

  - by JavierMartinz

  I have a problem with the Windows Server 2008 guest (hvm). I can't get a network interface running for him. I also have a Debian guest and it's working ok, but I can't do it with the Win2k8 guest. When I started the VM, the machine freezes and I can't connect by ssh to the host. /etc/network/interfaces # The loopback network interface auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 188.165.B.C netmask 255.255.255.0 network 188.165.B.0 broadcast 188.165.255.255 gateway 188.165.B.254 brctl show bridge name bridge id STP enabled interfaces eth0 8000.e840f20acc28 no peth0 /etc/xen/xend-config.sxp ... (vif-script vif-bridge) (network-script 'network-bridge') ... /etc/xen/win2k8.cfg # Networking # vif = [ 'ip=5.39.F.G,mac=yy:yy:yy:yy:yy:yy,type=ioemu,bridge=eth0' ] /etc/xen/debian.cfg # Networking # vif = [ 'ip=178.33.D.E,mac=xx:xx:xx:xx:xx:xx' ] As you can see, in the Debian guest I only have to specify an IP address and a MAC. But if I put that in the Win2k8 guest, the machine does not start. I am using Xen 4.0

  Read the article

• networking without port forwarding

  - by Wallacoloo

  I'm trying to add networking functionality to my game. I want any user to be able to host the game, and anyone to be able to connect as a client. The client sends info to the host about their player's position, etc. When the host receives a message, it validates it and then broadcasts it to its other clients. I will primarily be dealing with UDP, but will also need TCP for chat & lobby stuff. The problem is that I can't seem to get a packet sent from the client to the host or the other way around without enabling port forwarding on my router. But I don't think this is necessary. I believe the reason I need port forwarding is because I want to send a packet from 1 computer on a LAN to another computer on a different LAN, but neither of them have a global ip address since they're in a LAN. So really, I can only send packets targeting the other network's router, which must forward it on to the machine I want to reach. So how can I do this without port forwarding? Somehow a web server can communicate with my computer, which doesn't have a global ip, without port forwarding. And I've played plenty of multi-player games that don't require me to enable port forwarding. So it must be possible. Btw, I'm using SDL_Net. I don't think this will change anything though.

  Read the article

• Windows GPO default mapped drives

  - by SteB

  Is there a way, using Windows GPO, to set up a list of "default" mapped drives that can be applied to a group of users? I runs small network and would like to make sure that certain groups of users (like Sales or Support) have the same network shares mapped to the same drive letters irrespective of which PC they log onto. This would make the setup of new users easier and allow the centralised administration of the network locations shared. Any links to examples and/or step-by-step guides would be greatly appreciated.

  Read the article

• Windows Sharing requires password

  - by Linux Intel

  I have 3 machines on my local network Machine A , Machine B and Machine C OS on all machines is : Windows 7 64bit. Sharing Permissions on all machines : Everyone ( Read/Write ) no domain. Sharing folder name : project Machine A is sharing folder over the network without password. Machine B is sharing folder over the network without password. Machine C is sharing folder over the network without password. Machine A can normally access B and C without password required. Machine B can normally access A and C without password required Machine C can normally access Machine B without password. My problem is *Machine C* requires a password when it access Machine A also the shared folder in Machine A don't have password protected and Machine B can access Machine A without a password ! How can i solve the problem .?

  Read the article

• Two IP ranges on eth1 configuration for centos 6.2

  - by Trickzzz

  i have a dedicated server, with "Virtuozzo" on it running VPS's. I have: eth0 - which is configured to the internal network, that one is fine. Now I have: eth1 - which has two ranges routed through this device. x.x.134.x (which has 12 IP's sequentially) x.x.132.x (which has 5) eth1: DEVICE="eth1" HWADDR="00:25:90:37:65:67" NM_CONTROLLED="yes" ONBOOT="yes" IPADDR="x.x.134.x" NETMASK="255.255.255.240" GATEWAY="x.x.134.x" I tried using this with another file as well named "ifcfg-eth1:1" in /etc/sysconfig/network-scripts/ any ideas why the containers on eth1:1 would not link up to the network? Virtuozzo also thinks that eth1:1 is the primary network now, which isn't right?

  Read the article

• Upgraded from 11.10 to 12.04 now no network access

  - by MadeTheLeap

  A few weeks ago I decided I should enter the Linux world and read that Ubuntu is the most widely used release. I installed version 11.10 and it worked perfectly. Just this past week I decided I would do the upgrade to 12.04. The upgrade process itself worked fine. However, when I logged in I no longer had a network connection. I am running an AMD-based PC with a D-LINK DFE-530TXS network card and as I said, it worked fine in 11.10. I have scoured the Internet and come across a thousand slightly varying solutions, but they are too convoluted for someone new to Linux. Not because I can't follow the steps, but because most of the tools/utilities that are referenced (e.g. to compile, install, etc.) are not available when I use the stated steps in the solutions. So....should I re-install 11.10 or is there hope in getting this version to use the NIC that I know works. I have the latest driver from d-link for my NIC but I have no idea how to 'install' it for Ubuntu 12.04 to use. I know you will require additional information, but I wasn't sure what you would need. Thanks in advance.

  Read the article

• jquery is not working over local network [migrated]

  - by Kortyell Davis

  i have a fedora server running apache web server. the server is connected to a home network. i have a laptop connected to the same network. i can enter the ip address of my server into the browser of my laptop and pull up the index.html file located in the document root directory of the fedora home server. the index.html file contains jquery code. the jquery code only works when i open it locally in my browser (e.g. right click open with firefox), but when i attempt to view the webpage from my laptop the jquery code is not executed. the code is here below. <script type="text/javascript" src="jquery-1.8.2.js"></script> ' $(document).ready(function() { $('#form').hide(); $('input[type=text]').focus(function() { $(this).val(''); }); $('input[type=password]').focus(function() { $(this).val(''); }); $('.form').hide(); $('#log').click(function(){ $('#form').toggle(); }); $('#reg').click(function(){ $('.form').toggle(); }); });

  Read the article

• Windows XP to remote server 2008 R2 shares - awful response times

  - by nick3216

  I have a network infrastructure of Windows XP clients (a mix of XP and 64-bit XP), that are accessing a network share on a Windows 2008 R2 server. Whenever users type the address of a folder into the address bar of Windows Explorer it's as snappy at determining the contents of the current folder and presenting them to you in the address bar as if you're working on a local drive. But if you open one of the subfolders users get the animated red torch and 'Searching for items...' dialog, typically for 45 seconds. Similarly when using the open folder dialog to try and select a subfolder on this share it takes, on average, 45 seconds for the dialog to expand each node and show the subfolders of each node. Also, while the Explorer instance accsesing the network share is running slowly users notice that the performance of all other Explorer windows suffers. So while Explorer is searching for files on the network share they can't switch to another task and navigate around their local drive using Explorer because it's now as slow as a dead dog at accessing anything. Are there any settings we can change which will improve the performance accessing network shares?

  Read the article

< Previous Page | 46 47 48 49 50 51 52 53 54 55 56 57  | Next Page >