Search Results

Search found 16499 results on 660 pages for 'off rhoden'.

Page 50/660 | < Previous Page | 46 47 48 49 50 51 52 53 54 55 56 57  | Next Page >

• Ubuntu 13.10. After login, no desktop displayed. Two Nvidia Graphics Cards, Four Monitors

  - by jmerkow

  I am working on an issue with my Ubuntu 13.10 installation. I am attempting to get 4 monitors up and running but I am having some trouble. So far, I installed and updated to the latest NVIDIA drivers (331.20). Initially X would not start (after installation) so I replaced my xorg.conf with xorg.conf.failsafe. This fixed that problem, but then I tried to enable the other 2 monitors (other video card) and xorg fails to start once again (after I login there is no desktop). I am fairly new to linux but I am not a complete beginner, but I'm not comfortable poking around too much on my own to troubleshoot yet.... lspci -nn | grep VGA: 03:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF110 [GeForce GTX 570 Rev. 2] [10de:1086] (rev a1) 05:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF110 [GeForce GTX 580] [10de:1080] (rev a1) It seems that the nvidia-settings tool does not result in a good xorg.conf file. Here it is: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 331.20 (buildmeister@swio-display-x86-rhel47-05) Wed Oct 30 18:20:32 PDT 2013 Section "ServerLayout" Identifier "Default Layout" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "1" EndSection ... Section "Monitor" Identifier "Configured Monitor" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "SHARP HDMI" HorizSync 15.0 - 68.0 VertRefresh 55.0 - 76.0 EndSection Section "Monitor" Identifier "Monitor1" VendorName "Unknown" ModelName "Samsung SyncMaster" HorizSync 0.0 - 0.0 VertRefresh 0.0 EndSection Section "Device" Identifier "Configured Video Device" Driver "vesa" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 570" BusID "PCI:3:0:0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 580" BusID "PCI:5:0:0" EndSection Section "Screen" Identifier "Default Screen" Device "Configured Video Device" Monitor "Configured Monitor" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "Stereo" "0" Option "nvidiaXineramaInfoOrder" "DFP-1" Option "metamodes" "HDMI-0: nvidia-auto-select +640+0, DVI-I-3: nvidia-auto-select +0+1080" Option "SLI" "Off" Option "MultiGPU" "Off" Option "BaseMosaic" "off" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "Stereo" "0" Option "metamodes" "DVI-I-2: nvidia-auto-select +0+0" Option "SLI" "Off" Option "MultiGPU" "Off" Option "BaseMosaic" "off" SubSection "Display" Depth 24 EndSubSection EndSection Section "Extensions" Option "Composite" "Disable" EndSection

  Read the article

• How to locally test Django's Sites Framework

  - by Off Rhoden

  Django has the sites framework to support multiple web site hosting from a single Django installation. EDIT (below is an incorrect assumption of the system) I understand that middleware sets the settings.SITE_ID value based on a lookup/cache of the request domain. ENDEDIT But when testing locally, I'm at http://127.0.0.1:8000/, not http://my-actual-domain.com/ How do I locally view my different sites during development?

  Read the article

• Python datetime to Unix timestamp

  - by Off Rhoden

  I have to create an "Expires" value 5 minutes in the future, but I have to supply it in UNIX Timestamp format. I have this so far, but it seems like a hack. def expires(): '''return a UNIX style timestamp representing 5 minutes from now''' epoch = datetime.datetime(1970, 1, 1) seconds_in_a_day = 60 * 60 * 24 five_minutes = datetime.timedelta(seconds=5*60) five_minutes_from_now = datetime.datetime.now() + five_minutes since_epoch = five_minutes_from_now - epoch return since_epoch.days * seconds_in_a_day + since_epoch.seconds Is there a module or function that does the timestamp conversion for me?

  Read the article

• Is there a way to express Django admin settings inside the models, instead of admin.py?

  - by Off Rhoden

  Talking about Django 1.1.1. I thought at one time (0.96) the kinds of things put inside of the admin.py file were part of an inner class of the model. There's a certain beauty in having all of this in one place. But I don't know if this change was out of necessity. Any compelling reasons one way or the other?

  Read the article

• How to host 50 domains/sites with common Django code base

  - by Off Rhoden

  I have 50 different websites that use the same layout and code base, but mostly non-overlapping data (regional support sites, not link farm). Is there a way to have a single installation of the code and run all 50 at the same time? When I have a bug to fix (or deploy new feature), I want to deploy ONE time + 1 restart and be done with it. Also: Code needs to know what domain the request is coming to so the appropriate data is displayed.

  Read the article

• SQL-How to retrieve the correct data using php

  - by Programatt

  I am new to SQL so please excuse my question if it is simple. I have a database with a few tables. 1 is a users table, the others are application tables that contain the users preferences for receiving notifications about that application based on the country they are interested in. What I want to do, is retrieve the e-mail address of all users that have an interest in that country. I am struggling to think about how to do this. I currently have the following query constructed, and the code to populate the values function check($string) { if (isset($_POST[$string])) { $print = implode(', ', $_POST[$string]); //Converts an array into a single string $imanageSQLArr = Array(); if (substr_count($print,'Benelux') > 0) { $imanageSQLArr[0] = "checked"; } else { $imanageSQLArr[0] = "off"; } if (substr_count($print, 'France') > 0) { $imanageSQLArr[1] = "checked"; } else { $imanageSQLArr[1] = "off"; } if (substr_count($print, 'Germany') > 0) { $imanageSQLArr[2] = "checked"; } else { $imanageSQLArr[2] = "off"; } if (substr_count($print, 'Italy') > 0) { $imanageSQLArr[3] = "checked"; } else { $imanageSQLArr[3] = "off"; } if (substr_count($print, 'Netherlands') > 0) { $imanageSQLArr[4] = "checked"; } else { $imanageSQLArr[4] = "off"; } if (substr_count($print, 'Portugal') > 0) { $imanageSQLArr[5] = "checked"; } else { $imanageSQLArr[5] = "off"; } if (substr_count($print, 'Spain') > 0) { $imanageSQLArr[6] = "checked"; } else { $imanageSQLArr[6] = "off"; } if (substr_count($print, 'Sweden') > 0) { $imanageSQLArr[7] = "checked"; } else { $imanageSQLArr[7] = "off"; } if (substr_count($print, 'Switzerland') > 0) { $imanageSQLArr[8] = "checked"; } else { $imanageSQLArr[8] = "off"; } if (substr_count($print, 'UK') > 0) { $imanageSQLArr[9] = "checked"; } else { $imanageSQLArr[9] = "off"; } and the query $tocheck = $db->prepare( "SELECT users.email FROM users,app WHERE users.id=app.userid AND BENELUX=:BENELUX AND FRANCE=:FRANCE AND GERMANY=:GERMANY AND ITALY=:ITALY AND NETHERLANDS=:NETHERLANDS AND PORTUGAL=:PORTUGAL AND SPAIN=:SPAIN AND SWEDEN=:SWEDEN AND SWITZERLAND=:SWITZERLAND AND UK=:UK"); $tocheck->execute($country); $row = $tocheck->fetchAll(); This does retrieve data, but only people who's preferences match EXACTLY what is put (so what they haven't selected is taken into account as much as what they have). Any help would be greatly appreciated.

  Read the article

• Wireless acting weird ubuntu 12.04 LTS

  - by Philip Yeldhos

  I'm kinda new here, so please bear with me. My wireless driver is acting very weird. It shows my router's name, but when it is connecting (after entering the correct password), the icon on the tray is like, refreshing every once in a second, while showing the animation that it is connecting. And after a few seconds, error message come up saying that wireless network is disconnected. I installed the drive through "additional drivers". What info do you need? Somebody please help. philip@philip-HP-Mini-110-3100:~$ sudo iwconfig lo no wireless extensions. eth1 IEEE 802.11 ESSID:"" Mode:Managed Frequency:2.472 GHz Access Point: Not-Associated Bit Rate:72 Mb/s Tx-Power:24 dBm Retry min limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=5/5 Signal level=0 dBm Noise level=-96 dBm Rx invalid nwid:0 Rx invalid crypt:11 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 eth0 no wireless extensions. here's what lspci -v gave me: 02:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) Subsystem: Hewlett-Packard Company Device 1483 Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at 52000000 (64-bit, non-prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Capabilities: [58] Vendor Specific Information: Len=78 <?> Capabilities: [48] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [d0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [13c] Virtual Channel Capabilities: [160] Device Serial Number 00-00-82-ff-ff-3f-e0-2a Capabilities: [16c] Power Budgeting <?> Kernel driver in use: wl Kernel modules: wl, bcma, brcmsmac okay, i removed the driver additional drivers gave me. now, this is what has happened: lsmod gave me: philip@philip-HP-Mini-110-3100:~$ lsmod | grep brc brcmsmac 540875 0 mac80211 436455 1 brcmsmac brcmutil 14675 1 brcmsmac cfg80211 178679 2 brcmsmac,mac80211 crc8 12781 1 brcmsmac cordic 12487 1 brcmsmac and iwconfig gave me: philip@philip-HP-Mini-110-3100:~$ iwconfig lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=19 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off eth0 no wireless extensions. and lspci -v gave me: 02:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) Subsystem: Hewlett-Packard Company Device 1483 Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at 52000000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: brcmsmac Kernel modules: bcma, brcmsmac

  Read the article

• OBIEE 11.1.1.5.0 Bundle Patch 2 is available

  - by mshahi

  Oracle BI EE 11.1.1.5.0 Bundle Patch 2 is available. The Patch number is 13611078 and it can be downloaded from Oracle Support (you can download it without password). This patch currently is available on Microsoft Windows x64 (64 bit), Linux x86 - 64 bit, IBM AIX on Power System (64 bit) and Oracle Solaris Sparc (64 bit). Remaining four platforms Win32, Linux32, HP-Itanium, and Solaris x86-64 are expected 3-4 weeks later. This Patch has thoroughly been tested and signed off by BI QA Team.  Important things to know: 1. All the customers are advised to apply this patch as it contains around 248 bug fixes. Please read the README file for all the bug fixes contained in this patch.   2. This patch can be applied via opatch. Please follow the standard process of applying this patch using opatch, i.e. stop all BI System processes via opmnctl, Stop WLS Managed and Admin Servers, Apply Patch, Start WLS Admin and Managed Servers, Check if all the J2EE applications are running fine, Start all BI System Processes via opmnctl command, and verify your fixes. It is advised to test this patch on Non Productions Instances first, run all the required tests / regressions and then move it to Production.    3. This Bundle Patch is cumulative to 11.1.1.5.0 BP1 (13562882) which was released in January 2012 on Linux x86 - 64 bit which contained around 64 bug fixes. Customers who have applied 11.1.1.5.0 BP1, will get expected OPatch conflict message, they can safely roll back BP1 prior to installing this BP2 or let opatch roll back BP1 during its application process.   4. Customer who have applied some one off patches and these one off patches are also part of 11.1.1.5.0 BP2, they can also roll back their existing one off patches after confirming that their fixes are part of BP2.    5. This Bundle Patch is not cumulative on top of 11.1.1.5.0, meaning this bundle patch does not contain all the one off fixes that were delivered on top of 11.1.1.5.0. All the remaining one off fixes delivered so far, will be available in next scheduled bundle patch i.e. 11.1.1.5.0 BP3. Please check the README file and let support know if your existing fixes are not part of BP2, so that support can open One Off Backport (OOB) request to have them included in next patch i.e. BP3.   6. 11.1.1.5.0 BP3 is in planning stages, and dates for it's availability will be announced in next couple of weeks.

  Read the article

• ProFTPd server on Ubuntu getting access denied message when successfully authenticated?

  - by exxoid

  I have a Ubuntu box with a ProFTPD 1.3.4a Server, when I try to log in via my FTP Client I cannot do anything as it does not allow me to list directories; I have tried logging in as root and as a regular user and tried accessing different paths within the FTP Server. The error I get in my FTP Client is: Status: Retrieving directory listing... Command: CDUP Response: 250 CDUP command successful Command: PWD Response: 257 "/var" is the current directory Command: PASV Response: 227 Entering Passive Mode (172,16,4,22,237,205). Command: MLSD Response: 550 Access is denied. Error: Failed to retrieve directory listing Any idea? Here is the config of my proftpd: # # /etc/proftpd/proftpd.conf -- This is a basic ProFTPD configuration file. # To really apply changes, reload proftpd after modifications, if # it runs in daemon mode. It is not required in inetd/xinetd mode. # # Includes DSO modules Include /etc/proftpd/modules.conf # Set off to disable IPv6 support which is annoying on IPv4 only boxes. UseIPv6 off # If set on you can experience a longer connection delay in many cases. IdentLookups off ServerName "Drupal Intranet" ServerType standalone ServerIdent on "FTP Server ready" DeferWelcome on # Set the user and group that the server runs as User nobody Group nogroup MultilineRFC2228 on DefaultServer on ShowSymlinks on TimeoutNoTransfer 600 TimeoutStalled 600 TimeoutIdle 1200 DisplayLogin welcome.msg DisplayChdir .message true ListOptions "-l" DenyFilter \*.*/ # Use this to jail all users in their homes # DefaultRoot ~ # Users require a valid shell listed in /etc/shells to login. # Use this directive to release that constrain. # RequireValidShell off # Port 21 is the standard FTP port. Port 21 # In some cases you have to specify passive ports range to by-pass # firewall limitations. Ephemeral ports can be used for that, but # feel free to use a more narrow range. # PassivePorts 49152 65534 # If your host was NATted, this option is useful in order to # allow passive tranfers to work. You have to use your public # address and opening the passive ports used on your firewall as well. # MasqueradeAddress 1.2.3.4 # This is useful for masquerading address with dynamic IPs: # refresh any configured MasqueradeAddress directives every 8 hours <IfModule mod_dynmasq.c> # DynMasqRefresh 28800 </IfModule> # To prevent DoS attacks, set the maximum number of child processes # to 30. If you need to allow more than 30 concurrent connections # at once, simply increase this value. Note that this ONLY works # in standalone mode, in inetd mode you should use an inetd server # that allows you to limit maximum number of processes per service # (such as xinetd) MaxInstances 30 # Set the user and group that the server normally runs at. # Umask 022 is a good standard umask to prevent new files and dirs # (second parm) from being group and world writable. Umask 022 022 # Normally, we want files to be overwriteable. AllowOverwrite on # Uncomment this if you are using NIS or LDAP via NSS to retrieve passwords: # PersistentPasswd off # This is required to use both PAM-based authentication and local passwords AuthPAMConfig proftpd AuthOrder mod_auth_pam.c* mod_auth_unix.c # Be warned: use of this directive impacts CPU average load! # Uncomment this if you like to see progress and transfer rate with ftpwho # in downloads. That is not needed for uploads rates. # UseSendFile off TransferLog /var/log/proftpd/xferlog SystemLog /var/log/proftpd/proftpd.log # Logging onto /var/log/lastlog is enabled but set to off by default #UseLastlog on # In order to keep log file dates consistent after chroot, use timezone info # from /etc/localtime. If this is not set, and proftpd is configured to # chroot (e.g. DefaultRoot or <Anonymous>), it will use the non-daylight # savings timezone regardless of whether DST is in effect. #SetEnv TZ :/etc/localtime <IfModule mod_quotatab.c> QuotaEngine off </IfModule> <IfModule mod_ratio.c> Ratios off </IfModule> # Delay engine reduces impact of the so-called Timing Attack described in # http://www.securityfocus.com/bid/11430/discuss # It is on by default. <IfModule mod_delay.c> DelayEngine on </IfModule> <IfModule mod_ctrls.c> ControlsEngine off ControlsMaxClients 2 ControlsLog /var/log/proftpd/controls.log ControlsInterval 5 ControlsSocket /var/run/proftpd/proftpd.sock </IfModule> <IfModule mod_ctrls_admin.c> AdminControlsEngine off </IfModule> # # Alternative authentication frameworks # #Include /etc/proftpd/ldap.conf #Include /etc/proftpd/sql.conf # # This is used for FTPS connections # #Include /etc/proftpd/tls.conf # # Useful to keep VirtualHost/VirtualRoot directives separated # #Include /etc/proftpd/virtuals.con # A basic anonymous configuration, no upload directories. # <Anonymous ~ftp> # User ftp # Group nogroup # # We want clients to be able to login with "anonymous" as well as "ftp" # UserAlias anonymous ftp # # Cosmetic changes, all files belongs to ftp user # DirFakeUser on ftp # DirFakeGroup on ftp # # RequireValidShell off # # # Limit the maximum number of anonymous logins # MaxClients 10 # # # We want 'welcome.msg' displayed at login, and '.message' displayed # # in each newly chdired directory. # DisplayLogin welcome.msg # DisplayChdir .message # # # Limit WRITE everywhere in the anonymous chroot # <Directory *> # <Limit WRITE> # DenyAll # </Limit> # </Directory> # # # Uncomment this if you're brave. # # <Directory incoming> # # # Umask 022 is a good standard umask to prevent new files and dirs # # # (second parm) from being group and world writable. # # Umask 022 022 # # <Limit READ WRITE> # # DenyAll # # </Limit> # # <Limit STOR> # # AllowAll # # </Limit> # # </Directory> # # </Anonymous> # Include other custom configuration files Include /etc/proftpd/conf.d/ UseReverseDNS off <Global> RootLogin on UseFtpUsers on ServerIdent on DefaultChdir /var/www DeleteAbortedStores on LoginPasswordPrompt on AccessGrantMsg "You have been authenticated successfully." </Global> Any idea what could be wrong? Thanks for your help!

  Read the article

• Why does this code generate an error? [closed]

  - by user559601

  <link rel="search" type="application/opensearchdescription+xml" href="http://b.static.ak.fbcdn.net/rsrc.php/yJ/r/H2SSvhJMJA-.xml" title="" /> <link rel="shortcut icon" href="http://static.ak.fbcdn.net/rsrc.php/y7/r/5875srnzL-I.ico" /></head> <body class="WelcomePage UIPage_LoggedOut mac Locale_en_US"> <div id="FB_HiddenContainer" style="position:absolute; top:-10000px; width:0px; height:0px;" ></div> <div id="blueBar" class="loggedOut"></div> <div id="globalContainer"><div id="dialogContainer"></div><div id="dropmenu_container"></div> <div id="content" class="fb_content clearfix"><div ><!-- 2365fa3194ecdc0cab15721ce967a9f8663937c7 --> <div class="WelcomePage_Container"><div class="loggedout_menubar_container"><div class="clearfix loggedout_menubar"><a class="lfloat" href="/" title="Go to Home"><img class="fb_logo img" src="http://static.ak.fbcdn.net/rsrc.php/yp/r/kk8dc2UJYJ4.png" alt="Facebook logo" width="170" height="36" /></a><div class="rfloat"><div class="menu_login_container"><form method="POST" action="https://login.facebook.com/login.php?login_attempt=1" id="login_form" onsubmit="return Event.__inlineSubmit(this,event)"><input type="hidden" name="charset_test" value="&euro;,&acute;,€,´,?,?,?" /><input type="hidden" name="lsd" value="hEICz" autocomplete="off" /><input type="hidden" id="locale" name="locale" value="en_US" autocomplete="off" /><table cellspacing="0"><tr><td class="html7magic"><label for="email">Email</label></td><td class="html7magic"><label for="pass">Password</label></td></tr><tr><td><input type="text" class="inputtext" name="email" id="email" tabindex="1" /></td><td><input type="password" class="inputtext" name="pass" id="pass" tabindex="2" /></td><td><label class="uiButton uiButtonConfirm"><input value="Login" tabindex="4" type="submit" /></label></td></tr><tr><td class="login_form_label_field"><input type="checkbox" class="inputcheckbox" value="1" id="persistent" name="persistent" checked="1" /><input type="hidden" name="default_persistent" value="1" /><label id="label_persistent" for="persistent">Keep me logged in</label></td><td class="login_form_label_field"><a href="http://www.facebook.com/reset.php" rel="nofollow">Forgot your password?</a></td></tr></table><input type="hidden" name="charset_test" value="&euro;,&acute;,€,´,?,?,?" /><input type="hidden" id="lsd" name="lsd" value="hEICz" autocomplete="off" /></form> </div></div></div></div><div class="WelcomePage_MainSell"><div class="WelcomePage_MainSellCenter clearfix"><div class="WelcomePage_MainSellLeft"><div class="WelcomePage_MainMessage">Facebook helps you connect and share with the people in your life.</div><div class="WelcomePage_MainMap">&nbsp;</div></div><div class="WelcomePage_MainSellRight"><div class="WelcomePage_SignUpSection"><div class="WelcomePage_SignUpMessage"><div class="WelcomePage_SignUpHeadline">Sign Up</div><div class="WelcomePage_SignUpSubheadline">It's free, and always will be.</div></div><div class="WelcomePage_SimpleReg" id="registration_container"><div><noscript><div id="no_js_box"><h2>Javascript is disabled on your browser.</h2><p>Please enable JavaScript on your browser or upgrade to a Javascript-capable browser to register for Facebook.</p></div></noscript><div id="simple_registration_container" class="simple_registration_container"><div id="reg_box"><form method="post" id="reg" name="reg" onsubmit="return function(event)&#123;return false;&#125;.call(this,event)!==false &amp;&amp; Event.__inlineSubmit(this,event)"><input type="hidden" autocomplete="off" name="post_form_id" value="c3a2bed7243b9a85f53d69f23a38da9d" /><input type="hidden" name="lsd" value="hEICz" autocomplete="off" /><input type="hidden" autocomplete="off" id="reg_instance" name="reg_instance" value="bpgeTawHFSiHa5-7SR4gbif7" /><input type="hidden" autocomplete="off" id="locale" name="locale" value="en_US" /><input type="hidden" autocomplete="off" id="terms" name="terms" value="on" /><input type="hidden" autocomplete="off" id="abtest_registration_group" name="abtest_registration_group" value="1" /><input type="hidden" autocomplete="off" id="referrer" name="referrer" value="" /><input type="hidden" autocomplete="off" id="md5pass" name="md5pass" value="" /><input type="hidden" autocomplete="off" id="validate_mx_records" name="validate_mx_records" value="1" /><input type="hidden" autocomplete="off" id="ab_test_data" name="ab_test_data" value="" /><div id="reg_form_box" class="large_form"><table class="uiGrid editor" cellspacing="0" cellpadding="1"><tbody><tr><td class="label">First Name:</td><td><div class="field_container"><input type="text" class="inputtext" id="firstname" name="firstname" /></div></td></tr><tr><td class="label">Last Name:</td><td><div class="field_container"><input type="text" class="inputtext" id="lastname" name="lastname" /></div></td></tr><tr><td class="label">Your Email:</td><td><div class="field_container"><input type="text" class="inputtext" id="reg_email__" name="reg_email__" /></div></td></tr><tr><td class="label">Re-enter Email:</td><td><div class="field_container"><input type="text" class="inputtext" id="reg_email_confirmation__" name="reg_email_confirmation__" /></div></td></tr><tr><td class="label">New Password:</td><td><div class="field_container"><input type="password" class="inputtext" id="reg_passwd__" name="reg_passwd__" value="" /></div></td></tr><tr><td class="label">I am:</td><td><div class="field_container"><div class="hidden_elem"><select><option></option><option></option></select><select><option></option><option></option></select></div><select class="select" name="sex" id="sex"><option value="0">Select Sex:</option><option value="1">Female</option><option value="2">Male</option></select></div></td></tr><tr><td class="label">Birthday:</td><td><div class="field_container"> <select class="" id="birthday_month" name="birthday_month" onchange="return run_with(this, [&quot;editor&quot;], function() &#123;editor_date_month_change(this, &quot;birthday_day&quot;, &quot;birthday_year&quot;);&#125;);"><option value="-1">Month:</option><option value="1">Jan</option>

  Read the article

• htaccess redirect http to https on a magento site

  - by joesalvator

  I have a magento site and i need to have it redirect to https, i have the cert installed but i am not sure how to mod the htaccess file? here is a copy of the root htaccess file thanks # uncomment these lines for CGI mode make sure to specify the correct cgi php binary file name it might be /cgi-bin/php-cgi Action php5-cgi /cgi-bin/php5-cgi AddHandler php5-cgi .php # GoDaddy specific options Options -MultiViews you might also need to add this line to php.ini cgi.fix_pathinfo = 1 if it still doesn't work, rename php.ini to php5.ini # this line is specific for 1and1 hosting #AddType x-mapp-php5 .php #AddHandler x-mapp-php5 .php # default index file DirectoryIndex index.php # adjust memory limit php_value memory_limit 64M php_value memory_limit 128M php_value max_execution_time 18000 # disable magic quotes for php request vars php_flag magic_quotes_gpc off # disable automatic session start before autoload was initialized php_flag session.auto_start off # enable resulting html compression #php_flag zlib.output_compression on # disable user agent verification to not break multiple image upload php_flag suhosin.session.cryptua off # turn off compatibility with PHP4 when dealing with objects php_flag zend.ze1_compatibility_mode Off # disable POST processing to not break multiple image upload SecFilterEngine Off SecFilterScanPOST Off # # Insert filter on all content ###SetOutputFilter DEFLATE # Insert filter on selected content types only #AddOutputFilterByType DEFLATE text/html text/plain text/xml text/css text/javascript # Netscape 4.x has some problems... #BrowserMatch ^Mozilla/4 gzip-only-text/html # Netscape 4.06-4.08 have some more problems #BrowserMatch ^Mozilla/4\.0[678] no-gzip # MSIE masquerades as Netscape, but it is fine #BrowserMatch \bMSIE !no-gzip !gzip-only-text/html # Don't compress images #SetEnvIfNoCase Request_URI \.(?:gif|jpe?g|png)$ no-gzip dont-vary # Make sure proxies don't deliver the wrong content #Header append Vary User-Agent env=!dont-vary # make HTTPS env vars available for CGI mode SSLOptions StdEnvVars # enable rewrites Options +FollowSymLinks RewriteEngine on # you can put here your magento root folder path relative to web root #RewriteBase /magento/ # workaround for HTTP authorization in CGI environment RewriteRule .* - [E=HTTP_AUTHORIZATION:%{HTTP:Authorization}] # always send 404 on missing files in these folders RewriteCond %{REQUEST_URI} !^/(media|skin|js)/ # never rewrite for existing files, directories and links RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{REQUEST_FILENAME} !-l # rewrite everything else to index.php RewriteRule .* index.php [L] # Prevent character encoding issues from server overrides If you still have problems, use the second line instead AddDefaultCharset Off #AddDefaultCharset UTF-8 # s ExpiresDefault "access plus 1 year" # By default allow all access Order allow,deny Allow from all

  Read the article

• SELinux blocking Samba directory listing

  - by Sean M

  I am running Samba on a CentOS server, and I am experiencing a problem where it allows me to connect to the server and see a share, but shows the share as an empty directory. I find this behavior strange. Here is the stanza in my smb.conf for the given share: [seanm] path = /home/seanm writeable = yes valid users = seanm, root read only = No Here's what I see on the server side: [seanm@server ~]$ ls -l -rw-r--r-- 1 seanm seanm 40 Jan 4 13:45 pangram.txt And yet: [seanm@client ~]$ smbclient //server/seanm -U seanm -W WORKGROUP Enter seanm's password: Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.0.33-3.29.el5_5.1] smb: \> ls . D 0 Fri Jan 7 10:08:55 2011 .. D 0 Fri Jan 7 07:58:31 2011 58994 blocks of size 262144. 50356 blocks available This behavior is present on both a Windows client and a Linux client system. The behavior is present with the firewall on and with the firewall off, so it's not that. Neither /var/log/messages nor /var/log/secure have any complaints about Samba. I doubt that SELinux is a problem: just in case, here are the relevant settings. [root@server ~]# getsebool -a | grep samba samba_domain_controller --> off samba_enable_home_dirs --> on samba_export_all_ro --> off samba_export_all_rw --> off samba_share_fusefs --> off samba_share_nfs --> off use_samba_home_dirs --> on virt_use_samba --> off What am I doing wrong here, and what can I do to fix it? Edit: SELinux probably is the problem, judging by the fact that the issue goes away when I set SELinux to "permissive" or issue setsebool -P samba_export_all_rw on - both of which are unacceptable for production environments. What the heck kind of context does a directory need to have on it for Samba users to actually get files from it? I consider rolling your own rules and/or context to be deeply sub-optimal.

  Read the article

• LDAP: Extend database using referral

  - by ecapstone

  My company uses an off-site LDAP server to handle authentication. I'm currently working on a local VPN for my branch that needs to use the off-site LDAP to check user's usernames and passwords, but I don't want every employee to have access to the VPN - I need to be able to control whether users can authenticate with the off-site LDAP based on whether they're allowed to use the VPN. My current solution involves having our own local LDAP server, which has a referral to the off-site server (I got most of my information from here: http://www.zytrax.com/books/ldap/ch7/referrals.html). This means that when local users try to check their credentials with the local server, it redirects them to the off-site server, which checks the credentials. This works for authentication, but not for authorization. It would be easiest to add a vpn_users group or is_vpn_user attribute on the off-site server, but, well, that's above my pay grade. Is there any way I can use the local server to control whether users have access to the VPN without needing to change the off-site server? If I could somehow use it to have a local vpn_users group without the users in it having to be located on the local server, that would probably work, but I have no idea how to set that up or if LDAP even supports such a configuration. For reference, I'm using the openvpn-auth-ldap (https://code.google.com/p/openvpn-auth-ldap/) plugin.

  Read the article

• how to define service runlevel order position?

  - by DmitrySemenov

  I setup bind-dlz and need mysql start prior NAMED when system starts here is what I have [root@semenov]# ./test.sh mysql 0:off 1:off 2:on 3:on 4:on 5:on 6:off named 0:off 1:off 2:off 3:on 4:on 5:on 6:off lrwxrwxrwx. 1 root root 15 Apr 15 18:57 /etc/rc3.d/S93mysql -> ../init.d/mysql lrwxrwxrwx. 1 root root 15 Apr 15 18:57 /etc/rc3.d/S90named -> ../init.d/named here is what I have in mysql init script # Comments to support chkconfig on RedHat Linux # chkconfig: 2345 84 16 # description: A very fast and reliable SQL database engine. # Comments to support LSB init script conventions ### BEGIN INIT INFO # Provides: mysql # Required-Start: $local_fs $network $remote_fs # Should-Start: ypbind nscd ldap ntpd xntpd # Required-Stop: $local_fs $network $remote_fs # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: start and stop MySQL # Description: MySQL is a very fast and reliable SQL database engine. ### END INIT INFO so when I remove named from chkconfig and have there just mysql, it starts with order number 84: /etc/rc3.d/S84mysql - ../init.d/mysql but when I add named inside chkconfig it's order changes to 93: /etc/rc3.d/S93mysql - ../init.d/mysql as a result mysql will be starting after named and named will fail (no sql available) any ideas what I'm doing wrong? here is what I have in named init script # chkconfig: 345 90 16 # description: named (BIND) is a Domain Name Server (DNS) \ # that is used to resolve host names to IP addresses. # probe: true ### BEGIN INIT INFO # Provides: $named # Required-Start: $local_fs $network $syslog # Required-Stop: $local_fs $network $syslog # Default-Start:2 3 4 # Default-Stop: 0 1 2 3 4 5 6 # Short-Description: start|stop|status|restart|try-restart|reload|force-reload DNS server # Description: control ISC BIND implementation of DNS server ### END INIT INFO thanks, Dmitry

  Read the article

• nginx phpmyadmin 404

  - by borannb

  I am trying to install phpmyadmin on my nginx web server. I installed phpmyadmin without a problem. I created subdomain for it. For security reasons I didnt call my subdomain "phpmyadmin" i used a different name. Then I used this config for my subdomain server { listen 80; server_name myphpmyadminsubdomain.domain.com; access_log off; error_log /srv/www/myphpmyadminsubdomain/error.log; location / { root /usr/share/phpmyadmin; index index.php; } location ~ \.php$ { try_files $uri =404; fastcgi_split_path_info ^(.+\.php)(/.+)$; include fastcgi_params; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; # fastcgi_intercept_errors on; fastcgi_pass php; } location = /favicon.ico { log_not_found off; access_log off; } location = /robots.txt { allow all; log_not_found off; access_log off; } location ~ /\. { deny all; access_log off; log_not_found off; } } Then I enabled it like this; /etc/nginx/sites-available/myphpmyadminsubdomain /etc/nginx/sites-enabled/myphpmyadminsubdomain I have restarted the nginx and go to myphpmyadminsubdomain.domain.com and it is giving me nginx 404 Not Found error. what am I doing wrong?

  Read the article

• Samba Does Not List Files In Shared Directory

  - by Sean M

  I am running Samba on a CentOS server, and I am experiencing a problem where it allows me to connect to the server and see a share, but shows the share as an empty directory. I find this behavior strange. Here is the stanza in my smb.conf for the given share: [seanm] path = /home/seanm writeable = yes valid users = seanm, root read only = No Here's what I see on the server side: [seanm@server ~]$ ls -l -rw-r--r-- 1 seanm seanm 40 Jan 4 13:45 pangram.txt And yet: [seanm@client ~]$ smbclient //server/seanm -U seanm -W WORKGROUP Enter seanm's password: Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.0.33-3.29.el5_5.1] smb: \> ls . D 0 Fri Jan 7 10:08:55 2011 .. D 0 Fri Jan 7 07:58:31 2011 58994 blocks of size 262144. 50356 blocks available This behavior is present on both a Windows client and a Linux client system. The behavior is present with the firewall on and with the firewall off, so it's not that. Neither /var/log/messages nor /var/log/secure have any complaints about Samba. I doubt that SELinux is a problem: just in case, here are the relevant settings. [root@server ~]# getsebool -a | grep samba samba_domain_controller --> off samba_enable_home_dirs --> on samba_export_all_ro --> off samba_export_all_rw --> off samba_share_fusefs --> off samba_share_nfs --> off use_samba_home_dirs --> on virt_use_samba --> off What am I doing wrong here, and what can I do to fix it?

  Read the article

• My pivot chart has the wrong Y axis values but correct data point values

  - by Mark Harnett

  I created a pivot chart based on some raw data for the x axis (dates) and 4 calculated fields for the Y values. The values on resulting lines are correct (see the data label at the end of the line) but the Y axis is off by about 100, but not off by any consistent amount. I have played with auto axis on and off, turn log scale on and off. All to no avail. Does anybody have any thoughts? Image link

  Read the article

• Where do I find Apache's configtest declaration?

  - by user1438038

  I want to improve security of my Apache webserver. Open: /etc/apache2/conf.d/security Edit: ServerTokens Prod ServerSignature Off Reload/Restart: /etc/init.d/apache2 reload /etc/init.d/apache2 restart The values Prod and Off should be fine, but I get these errors: ServerTokens takes one argument, Determine tokens displayed in the Server: header - Min(imal), OS or Full Action 'configtest' failed. ServerSignature takes one argument, En-/disable server signature (on|off|email) Action 'configtest' failed. Where do I find Apache's configtest declaration, so I can tell it to accept Prod and Off?

  Read the article

• Why does Sql Server recommends creating an index when it already exist?

  - by Pierre-Alain Vigeant

  I ran a very basic query against one of our table and I noticed that the execution plan query processor is recommending that we create an index on a column The query is SELECT SUM(DATALENGTH(Data)) FROM Item WHERE Namespace = 'http://some_url/some_namespace/' After running, I get the following message // The Query Processor estimates that implementing the following index could improve the query cost by 96.7211%. CREATE NONCLUSTERED INDEX [<Name of Missing Index, sysname,>] ON [dbo].[Item] ([Namespace]) My problem is that I already have such index on that column: CREATE NONCLUSTERED INDEX [IX_ItemNamespace] ON [dbo].[Item] ( [Namespace] ASC )WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, IGNORE_DUP_KEY = OFF, DROP_EXISTING = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY] Why is Sql Server recommending me to create such index when it already exist?

  Read the article

• Problems Enforcing Referential Integrity on SQL Server Tables

  - by SidC

  Hello All, I have a SQL Server 2005 database comprised of Customer, Quote, QuoteDetail tables. I want/need to enforce referential integrity such that when an insert is made on quotedetail, the quote and customer tables are also affected. I have tried my best to set up primary/foreign keys on my tables but need some help. Here's the scripts for my tables as they stand now (please don't laugh): Customers: USE [Diel_inventory] GO /****** Object: Table [dbo].[Customers] Script Date: 05/08/2010 03:39:04 ******/ SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO CREATE TABLE [dbo].[Customers]( [pkCustID] [int] IDENTITY(1,1) NOT NULL, [CompanyName] [nvarchar](50) NULL, [Address] [nvarchar](50) NULL, [City] [nvarchar](50) NULL, [State] [nvarchar](2) NULL, [ZipCode] [nvarchar](5) NULL, [OfficePhone] [nvarchar](12) NULL, [OfficeFAX] [nvarchar](12) NULL, [Email] [nvarchar](50) NULL, [PrimaryContactName] [nvarchar](50) NULL, CONSTRAINT [PK_Customers] PRIMARY KEY CLUSTERED ([pkCustID] ASC)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY] ) ON [PRIMARY] Quotes: USE [Diel_inventory] GO /****** Object: Table [dbo].[Quotes] Script Date: 05/08/2010 03:30:46 ******/ SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO CREATE TABLE [dbo].[Quotes]( [pkQuoteID] [int] IDENTITY(1,1) NOT NULL, [fkCustomerID] [int] NOT NULL, [QuoteDate] [timestamp] NOT NULL, [NeedbyDate] [datetime] NULL, [QuoteAmt] [decimal](6, 2) NOT NULL, [QuoteApproved] [bit] NOT NULL, [fkOrderID] [int] NOT NULL, CONSTRAINT [PK_Bids] PRIMARY KEY CLUSTERED ( [pkQuoteID] ASC)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY] ) ON [PRIMARY] GO ALTER TABLE [dbo].[Quotes] WITH CHECK ADD CONSTRAINT [fkCustomerID] FOREIGN KEY([fkCustomerID]) REFERENCES [dbo].[Customers] ([pkCustID]) GO ALTER TABLE [dbo].[Quotes] CHECK CONSTRAINT [fkCustomerID] QuoteDetail: USE [Diel_inventory] GO /****** Object: Table [dbo].[QuoteDetail] Script Date: 05/08/2010 03:31:58 ******/ SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO CREATE TABLE [dbo].[QuoteDetail]( [ID] [int] IDENTITY(1,1) NOT NULL, [fkQuoteID] [int] NOT NULL, [fkCustomerID] [int] NOT NULL, [fkPartID] [int] NULL, [PartNumber1] [float] NOT NULL, [Qty1] [int] NOT NULL, [PartNumber2] [float] NULL, [Qty2] [int] NULL, [PartNumber3] [float] NULL, [Qty3] [int] NULL, [PartNumber4] [float] NULL, [Qty4] [int] NULL, [PartNumber5] [float] NULL, [Qty5] [int] NULL, [PartNumber6] [float] NULL, [Qty6] [int] NULL, [PartNumber7] [float] NULL, [Qty7] [int] NULL, [PartNumber8] [float] NULL, [Qty8] [int] NULL, [PartNumber9] [float] NULL, [Qty9] [int] NULL, [PartNumber10] [float] NULL, [Qty10] [int] NULL, [PartNumber11] [float] NULL, [Qty11] [int] NULL, [PartNumber12] [float] NULL, [Qty12] [int] NULL, [PartNumber13] [float] NULL, [Qty13] [int] NULL, [PartNumber14] [float] NULL, [Qty14] [int] NULL, [PartNumber15] [float] NULL, [Qty15] [int] NULL, [PartNumber16] [float] NULL, [Qty16] [int] NULL, [PartNumber17] [float] NULL, [Qty17] [int] NULL, [PartNumber18] [float] NULL, [Qty18] [int] NULL, [PartNumber19] [float] NULL, [Qty19] [int] NULL, [PartNumber20] [float] NULL, [Qty20] [int] NULL, CONSTRAINT [PK_QuoteDetail] PRIMARY KEY CLUSTERED ( [ID] ASC )WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY] ) ON [PRIMARY] GO ALTER TABLE [dbo].[QuoteDetail] WITH CHECK ADD CONSTRAINT [FK_QuoteDetail_Customers] FOREIGN KEY ([fkCustomerID]) REFERENCES [dbo].[Customers] ([pkCustID]) GO ALTER TABLE [dbo].[QuoteDetail] CHECK CONSTRAINT [FK_QuoteDetail_Customers] GO ALTER TABLE [dbo].[QuoteDetail] WITH CHECK ADD CONSTRAINT [FK_QuoteDetail_PartList] FOREIGN KEY ([fkPartID]) REFERENCES [dbo].[PartList] ([RecID]) GO ALTER TABLE [dbo].[QuoteDetail] CHECK CONSTRAINT [FK_QuoteDetail_PartList] GO ALTER TABLE [dbo].[QuoteDetail] WITH CHECK ADD CONSTRAINT [FK_QuoteDetail_Quotes] FOREIGN KEY([fkQuoteID]) REFERENCES [dbo].[Quotes] ([pkQuoteID]) GO ALTER TABLE [dbo].[QuoteDetail] CHECK CONSTRAINT [FK_QuoteDetail_Quotes] Your advice/guidance on how to set these up so that customer ID in Customers is the same as in Quotes (referential integrity) and that CustomerID is inserted on Quotes and Customers when an insert is made to QuoteDetial would be much appreciated. Thanks, Sid

  Read the article

• NHunspellTextBoxExtender - A Spellchecking IExtenderProvider for TextBoxes using Hunspell for .NET

  Extends controls inheriting TextBoxBase to provide off-line spell checking functionality

  Read the article

• Auto-cancel reason not found (6, 13906)

  - by Rajesh Sharma

  There are many errors in the application which are never invoked because of appropriate application configuration done at the time of implementation by the solution architects. So typically, as an application end user you would never stumble upon such errors. But what if the application administrator inadvertently changes the configuration/setup in the development, test, QA, or production environment? This is the time when you as an end user are introduced to a brand-new error for which you may not have a clue or understanding to what it means and neither the access/privilege to rectify it.    In this post we'll focus on one such error '6, 13906 - Auto-cancel reason not found'.   You get this error if you have not defined a Bill (Segment) Cancel Reason (Admin Menu, B, Bill Cancel Reason) code with System Default value of Turn off auto-cancel.   Consider a scenario when you are about to final bill an 'Account' for which the bill period's cut-off date you selected is falling on or after the Service Agreement's (SA) end/stop date (basically SA is Stopped with a date earlier than it was billed previously). And for the same 'Account' either: Bill segments exists that end after the SA's end date OR Non-closing bill segments exists that end on the SA's end date (OR closing bill segments that do not end on SA's end date or do not exist at all - remember closing/final bill segment is generated if the SA is in Stopped status).   CC&B detects such scenario and attempts to cancel all such violating bill segments automatically, but NOT if you are generating the bill Online. If online, the system assumes that you know what you are doing, and prompts you with error 2, 13716 - Bill segments that violate the SA (%1) End Date (%2) exist to take necessary action.   If in batch, system automatically cancels these kinds of bill segment(s).   Since this happens in the background, you have to define within the application which System Default Bill (Segment) cancellation reason code identified as Turn off auto-cancel, should be used by the process when it attempts to cancel any such violating bill segments (You already know that you cannot cancel a bill segment without giving a reason for cancellation).   So what exactly happens during batch billing?   Bill Segment generation routine at first determines billing eligibility of the service agreement being billed. One of the billing eligibility criteria is to check the SA's previous bill segments which have end dates greater than the current cut-off date/end date. Technically, the routine retrieves a count of such violating bill segments.     SELECT COUNT (*) FROM CI_BSEG WHERE SA_ID = :SA-ID AND BSEG_STAT_FLG = '50' -- Frozen AND END_DT IS NOT NULL AND (END_DT > '03-JUN-2010' -- Bill segment greater than SA's End Date OR OR (END_DT = '03-JUN-2010' AND CLOSING_BSEG_SW = 'N')) -- Non-closing bill segment ending on SA's end date   If the count is greater than zero, Bill segment generation routine executes another program to auto-cancel such bill segments. Auto-cancel program retrieves the 'Bill Cancel Reason' code which is identified as Turn off auto-cancel. Retrieved cancel reason code is then placed on the bill segments that are being cancelled automatically.   During this process if the routine fails to determine the bill cancel reason code having System Default Turn off auto-cancel because it was not been configured, you get a bill exception 6, 13906 - Auto-cancel reason not found.   Also note that duplicate or multiple System Default codes identified as Turn off auto-cancel are not allowed. CC&B would complain with an error 2, 54201.   Duplicate validation/check is also performed within Auto-cancel routine, if suppose for test purposes you executed a DML statement updating CI_BILL_CAN_RSN.BSCAN_SYS_DFLT_FLG with a value 'T'.

  Read the article

• 13.10 - Weird WiFi connection problems - WMP300N - Broadcom BCM4321

  - by user1898041

  Just installed 13.10 on my desktop and I really like it. After having problems with getting the wifi to work, I installed it connected to the internet with an ethernet cable and added in the 3rd party software and updates as per the installation procedure. After installation was completed, I saw the wifi icon in the upper right hand corner, but it was not seeing any wifi networks. Some Googling brought me to use the 'Additional Drivers' application. It found the WMP300N Broadcom BDM4321 based pci wifi card and installed the proprietary Broadcom STA wireless driver, which may have been installed before. I'm not sure. Here is the weird part: when I start my system, wifi seems to be in some sort of suspended state where the system sees that the card exists but the card will not detect any wifi networks. It will work after booting once I 'Additional Drivers' application and then start FireFox. I know it seems weird, but this is the process I've got down to get the card to recognize wifi networks. After those applications are open for a few seconds, the card starts to function like normal (although maintaining the wifi connection is problem but most likely a seperate issue). The reason this is a problem is because this is supposed to just be a headless box managed through SSH. Here are the readouts from the common network diagnosis programs BEFORE I open 'Additional Drivers' and 'FireFox'. All commands were done with sudo. lspci 00:00.0 Host bridge: Intel Corporation 82G35 Express DRAM Controller (rev 03) 00:01.0 PCI bridge: Intel Corporation 82G35 Express PCI Express Root Port (rev 03) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02) 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02) 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02) 00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 02) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92) 00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA Controller [AHCI mode] (rev 02) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02) 01:00.0 VGA compatible controller: NVIDIA Corporation GT216 [GeForce GT 220] (rev a2) 01:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1) 02:00.0 Ethernet controller: Qualcomm Atheros Attansic L1 Gigabit Ethernet (rev b0) 03:00.0 IDE interface: JMicron Technology Corp. JMB368 IDE controller 05:00.0 Network controller: Broadcom Corporation BCM4321 802.11b/g/n (rev 01) 05:03.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0) - lshw *-network description: Ethernet interface product: Attansic L1 Gigabit Ethernet vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: b0 serial: 00:22:15:00:a8:12 capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1 driverversion=2.1.3 latency=0 link=no multicast=yes port=twisted pair resources: irq:46 memory:feac0000-feafffff memory:feaa0000-feabffff *-network description: Wireless interface product: BCM4321 802.11b/g/n vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:05:00.0 logical name: eth1 version: 01 serial: 00:23:69:d8:2b:16 width: 32 bits clock: 33MHz capabilities: bus_master ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=6.30.223.141 (r415941) latency=64 multicast=yes wireless=IEEE 802.11abg resources: irq:16 memory:febfc000-febfffff - ifconfig eth0 Link encap:Ethernet HWaddr 00:22:15:00:a8:12 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth1 Link encap:Ethernet HWaddr 00:23:69:d8:2b:16 inet6 addr: fe80::223:69ff:fed8:2b16/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:16 Base address:0xc000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:24 errors:0 dropped:0 overruns:0 frame:0 TX packets:24 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1856 (1.8 KB) TX bytes:1856 (1.8 KB) - iwconfig eth1 IEEE 802.11abg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=200 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off - iwlist scan eth1 No scan results - Here are the various commands AFTER I open 'Additional Drivers' and 'FireFox' lspci 00:00.0 Host bridge: Intel Corporation 82G35 Express DRAM Controller (rev 03) 00:01.0 PCI bridge: Intel Corporation 82G35 Express PCI Express Root Port (rev 03) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02) 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02) 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02) 00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 02) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92) 00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA Controller [AHCI mode] (rev 02) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02) 01:00.0 VGA compatible controller: NVIDIA Corporation GT216 [GeForce GT 220] (rev a2) 01:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1) 02:00.0 Ethernet controller: Qualcomm Atheros Attansic L1 Gigabit Ethernet (rev b0) 03:00.0 IDE interface: JMicron Technology Corp. JMB368 IDE controller 05:00.0 Network controller: Broadcom Corporation BCM4321 802.11b/g/n (rev 01) 05:03.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0) - lshw *-network description: Ethernet interface product: Attansic L1 Gigabit Ethernet vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: b0 serial: 00:22:15:00:a8:12 capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1 driverversion=2.1.3 latency=0 link=no multicast=yes port=twisted pair resources: irq:46 memory:feac0000-feafffff memory:feaa0000-feabffff *-network description: Wireless interface product: BCM4321 802.11b/g/n vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:05:00.0 logical name: eth1 version: 01 serial: 00:23:69:d8:2b:16 width: 32 bits clock: 33MHz capabilities: bus_master ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=6.30.223.141 (r415941) ip=192.168.1.103 latency=64 multicast=yes wireless=IEEE 802.11abg resources: irq:16 memory:febfc000-febfffff - ifconfig eth0 Link encap:Ethernet HWaddr 00:22:15:00:a8:12 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth1 Link encap:Ethernet HWaddr 00:23:69:d8:2b:16 inet addr:192.168.1.103 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::223:69ff:fed8:2b16/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:85 errors:0 dropped:0 overruns:0 frame:11901 TX packets:132 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:52641 (52.6 KB) TX bytes:19058 (19.0 KB) Interrupt:16 Base address:0xc000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:76 errors:0 dropped:0 overruns:0 frame:0 TX packets:76 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:6084 (6.0 KB) TX bytes:6084 (6.0 KB) - iwconfig eth1 IEEE 802.11abg ESSID:"BU" Mode:Managed Frequency:2.447 GHz Access Point: 00:26:F2:1F:81:02 Bit Rate=54 Mb/s Tx-Power=200 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=59/70 Signal level=-51 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 - iwlist scan A LOT OF SSIDs FOUND! - I'd like to have this problem fixed, but I'm not quite sure where to go. Been Googling a lot and can't seem to find anyone else with this problem.

  Read the article

• wireless detected but Can't connect to network, Wifi card intel pro wireless N100 BGN

  - by Alexandre777

  Thanks in advance, I installed Linux Mint kernel 3.0.0-12 x64 ,wireless is detected and I configure it in network manager but can't coonect, there are the results of command line: $ iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=off Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off $ sudo lshw -C network** *-network description: Wireless interface product: Centrino Wireless-N 1000 vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 00 serial: 00:1e:64:51:c9:d6 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlagn driverversion=3.0.0-12-generic firmware=39.31.5.1 build 35138 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:48 memory:d7400000-d7401fff *-network description: Ethernet interface product: AR8131 Gigabit Ethernet vendor: Atheros Communications physical id: 0 bus info: pci@0000:06:00.0 logical name: eth0 version: c0 serial: 48:5b:39:99:8f:16 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI duplex=full firmware=N/A ip=192.168.1.2 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:51 memory:d3800000-d383ffff ioport:8000(size=128 $ rfkill list all 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no Thank you.

  Read the article

• Wireless iwconfig rate auto too low

  - by Jamie Kitson

  Hi, left to its own devices my wireless connects at too low a speed. I have a 20meg internet connection and my wireless is slowing it down to like 3meg. When I reboot into windows it's fine. When I run iwconfig eth1 rate 24M or even 48M the connection is much faster and runs fine, why won't it automatically go higher? Is this the fault of the driver? I am running Broadcom's driver compiled from source. Would adding iwconfig eth1 rate 24M to rc.local be the right way to force it at boot? Output from iwconfig when rate=auto: eth1 IEEE 802.11 ESSID:"honeypot" Mode:Managed Frequency:2.417 GHz Access Point: xxx Bit Rate=1 Mb/s Tx-Power:24 dBm Retry min limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=5/5 Signal level=-47 dBm Noise level=-91 dBm Rx invalid nwid:0 Rx invalid crypt:2 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 Thanks, Jamie

  Read the article

< Previous Page | 46 47 48 49 50 51 52 53 54 55 56 57  | Next Page >