Search Results

Search found 1660 results on 67 pages for 'region'.

Page 50/67 | < Previous Page | 46 47 48 49 50 51 52 53 54 55 56 57  | Next Page >

• How can I get DVDs playing after a Vista to XP change?

  - by Liath

  I replaced my vista install on a Dell Inspiron 1525 with XP and have managed to get most things up and running again however I'm having trouble with playing DVDs. When I try and play a DVD I get the following message: Windows Media Player cannot play this DVD because there is a problem with digital copy protection between your DVD drive, decoder, and video card. Try installing an updated driver for your video card. I have ensured that my drive is configured to play Region 2 discs (I'm in the UK), I've installed the most up to date XP codec pack which makes me think it's a driver issue. In device manager I have got my DVD drivers up to date however under "Other Devices" I'm missing several which sound key: Audio Device on High Definition Audio Bus Modem Device on High Definition Audio Bus Video Controller Video Controller (VGA Compatible) However I've installed all the relevant drivers I can find on the Dell website. The drive itself is working - I've run software from the drive. I'm afraid I am far from a sys-admin so I'm struggling on this one. How can I get my DVDs playing again?

  Read the article

• How can I get DVDs playing after a Vista to XP change? [closed]

  - by Liath

  I replaced my vista install on a Dell Inspiron 1525 with XP and have managed to get most things up and running again however I'm having trouble with playing DVDs. When I try and play a DVD I get the following message: Windows Media Player cannot play this DVD because there is a problem with digital copy protection between your DVD drive, decoder, and video card. Try installing an updated driver for your video card. I have ensured that my drive is configured to play Region 2 discs (I'm in the UK), I've installed the most up to date XP codec pack which makes me think it's a driver issue. In device manager I have got my DVD drivers up to date however under "Other Devices" I'm missing several which sound key: Audio Device on High Definition Audio Bus Modem Device on High Definition Audio Bus Video Controller Video Controller (VGA Compatible) However I've installed all the relevant drivers I can find on the Dell website. The drive itself is working - I've run software from the drive. I'm afraid I am far from a sys-admin so I'm struggling on this one. How can I get my DVDs playing again?

  Read the article

• AutoMapper is not working for a Container class

  - by rboarman

  Hello, I have an AutoMapper issue that has been driving me crazy for way too long now. A similar question was also posted on the AutoMapper user site but has not gotten much love. The summary is that I have a container class that holds a Dictionary of components. The components are a derived object of a common base class. I also have a parallel structure that I am using as DTO objects to which I want to map. The error that gets generated seems to say that the mapper cannot map between two of the classes that I have included in the CreateMap calls. I think the error has to do with the fact that I have a Dictionary of objects that are not part of the container‘s hierarchy. I apologize in advance for the length of the code below. My simple test cases work. Needless to say, it’s only the more complex case that is failing. Here are the classes: #region Dto objects public class ComponentContainerDTO { public Dictionary<string, ComponentDTO> Components { get; set; } public ComponentContainerDTO() { this.Components = new Dictionary<string, ComponentDTO>(); } } public class EntityDTO : ComponentContainerDTO { public int Id { get; set; } } public class ComponentDTO { public EntityDTO Owner { get; set; } public int Id { get; set; } public string Name { get; set; } public string ComponentType { get; set; } } public class HealthDTO : ComponentDTO { public decimal CurrentHealth { get; set; } } public class PhysicalLocationDTO : ComponentDTO { public Point2D Location { get; set; } } #endregion #region Domain objects public class ComponentContainer { public Dictionary<string, Component> Components { get; set; } public ComponentContainer() { this.Components = new Dictionary<string, Component>(); } } public class Entity : ComponentContainer { public int Id { get; set; } } public class Component { public Entity Owner { get; set; } public int Id { get; set; } public string Name { get; set; } public string ComponentType { get; set; } } public class Health : Component { public decimal CurrentHealth { get; set; } } public struct Point2D { public decimal X; public decimal Y; public Point2D(decimal x, decimal y) { X = x; Y = y; } } public class PhysicalLocation : Component { public Point2D Location { get; set; } } #endregion The code: var entity = new Entity() { Id = 1 }; var healthComponent = new Health() { CurrentHealth = 100, Owner = entity, Name = "Health", Id = 2 }; entity.Components.Add("1", healthComponent); var locationComponent = new PhysicalLocation() { Location = new Point2D() { X = 1, Y = 2 }, Owner = entity, Name = "PhysicalLocation", Id = 3 }; entity.Components.Add("2", locationComponent); Mapper.CreateMap<ComponentContainer, ComponentContainerDTO>() .Include<Entity, EntityDTO>(); Mapper.CreateMap<Entity, EntityDTO>(); Mapper.CreateMap<Component, ComponentDTO>() .Include<Health, HealthDTO>() .Include<PhysicalLocation, PhysicalLocationDTO>(); Mapper.CreateMap<Component, ComponentDTO>(); Mapper.CreateMap<Health, HealthDTO>(); Mapper.CreateMap<PhysicalLocation, PhysicalLocationDTO>(); Mapper.AssertConfigurationIsValid(); var targetEntity = Mapper.Map<Entity, EntityDTO>(entity); The error when I call Map() (abbreviated stack crawls): AutoMapper.AutoMapperMappingException was unhandled Message=Trying to map MapperTest1.Entity to MapperTest1.EntityDTO. Using mapping configuration for MapperTest1.Entity to MapperTest1.EntityDTO Exception of type 'AutoMapper.AutoMapperMappingException' was thrown. Source=AutoMapper StackTrace: at AutoMapper.MappingEngine.AutoMapper.IMappingEngineRunner.Map(ResolutionContext context) . . . InnerException: AutoMapper.AutoMapperMappingException Message=Trying to map System.Collections.Generic.Dictionary`2[[System.String, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089],[MapperTest1.Component, ElasticTest1, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null]] to System.Collections.Generic.Dictionary`2[[System.String, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089],[MapperTest1.ComponentDTO, ElasticTest1, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null]]. Using mapping configuration for MapperTest1.Entity to MapperTest1.EntityDTO Destination property: Components Exception of type 'AutoMapper.AutoMapperMappingException' was thrown. Source=AutoMapper StackTrace: at AutoMapper.Mappers.TypeMapObjectMapperRegistry.PropertyMapMappingStrategy.MapPropertyValue(ResolutionContext context, IMappingEngineRunner mapper, Object mappedObject, PropertyMap propertyMap) . . InnerException: AutoMapper.AutoMapperMappingException Message=Trying to map System.Collections.Generic.Dictionary`2[[System.String, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089],[MapperTest1.Component, ElasticTest1, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null]] to System.Collections.Generic.Dictionary`2[[System.String, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089],[MapperTest1.ComponentDTO, ElasticTest1, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null]]. Using mapping configuration for MapperTest1.Entity to MapperTest1.EntityDTO Destination property: Components Exception of type 'AutoMapper.AutoMapperMappingException' was thrown. Source=AutoMapper StackTrace: at AutoMapper.MappingEngine.AutoMapper.IMappingEngineRunner.Map(ResolutionContext context) . InnerException: AutoMapper.AutoMapperMappingException Message=Trying to map MapperTest1.Component to MapperTest1.ComponentDTO. Using mapping configuration for MapperTest1.Health to MapperTest1.HealthDTO Destination property: Components Exception of type 'AutoMapper.AutoMapperMappingException' was thrown. Source=AutoMapper StackTrace: at AutoMapper.MappingEngine.AutoMapper.IMappingEngineRunner.Map(ResolutionContext context) . . InnerException: AutoMapper.AutoMapperMappingException Message=Trying to map System.Decimal to System.Decimal. Using mapping configuration for MapperTest1.Health to MapperTest1.HealthDTO Destination property: CurrentHealth Exception of type 'AutoMapper.AutoMapperMappingException' was thrown. Source=AutoMapper StackTrace: at AutoMapper.Mappers.TypeMapObjectMapperRegistry.PropertyMapMappingStrategy.MapPropertyValue(ResolutionContext context, IMappingEngineRunner mapper, Object mappedObject, PropertyMap propertyMap) . . InnerException: System.InvalidCastException Message=Unable to cast object of type 'MapperTest1.ComponentDTO' to type 'MapperTest1.HealthDTO'. Source=Anonymously Hosted DynamicMethods Assembly StackTrace: at SetCurrentHealth(Object , Object ) . . Thank you in advance. Rick

  Read the article

• How to use Ninject with XNA?

  - by Rosarch

  I'm having difficulty integrating Ninject with XNA. static class Program { /** * The main entry point for the application. */ static void Main(string[] args) { IKernel kernel = new StandardKernel(NinjectModuleManager.GetModules()); CachedContentLoader content = kernel.Get<CachedContentLoader>(); // stack overflow here MasterEngine game = kernel.Get<MasterEngine>(); game.Run(); } } // constructor for the game public MasterEngine(IKernel kernel) : base(kernel) { this.inputReader = kernel.Get<IInputReader>(); graphicsDeviceManager = kernel.Get<GraphicsDeviceManager>(); Components.Add(kernel.Get<GamerServicesComponent>()); // Tell the loader to look for all files relative to the "Content" directory. Assets = kernel.Get<CachedContentLoader>(); //Sets dimensions of the game window graphicsDeviceManager.PreferredBackBufferWidth = 800; graphicsDeviceManager.PreferredBackBufferHeight = 600; graphicsDeviceManager.ApplyChanges(); IsMouseVisible = false; } Ninject.cs: using System; using System.Collections.Generic; using System.Linq; using System.Text; using Ninject.Modules; using HWAlphaRelease.Controller; using Microsoft.Xna.Framework; using Nuclex.DependencyInjection.Demo.Scaffolding; using Microsoft.Xna.Framework.Content; using Microsoft.Xna.Framework.Graphics; namespace HWAlphaRelease { public static class NinjectModuleManager { public static NinjectModule[] GetModules() { return new NinjectModule[1] { new GameModule() }; } /// <summary>Dependency injection rules for the main game instance</summary> public class GameModule : NinjectModule { #region class ServiceProviderAdapter /// <summary>Delegates to the game's built-in service provider</summary> /// <remarks> /// <para> /// When a class' constructor requires an IServiceProvider, the dependency /// injector cannot just construct a new one and wouldn't know that it has /// to create an instance of the Game class (or take it from the existing /// Game instance). /// </para> /// <para> /// The solution, then, is this small adapter that takes a Game instance /// and acts as if it was a freely constructable IServiceProvider implementation /// while in reality, it delegates all lookups to the Game's service container. /// </para> /// </remarks> private class ServiceProviderAdapter : IServiceProvider { /// <summary>Initializes a new service provider adapter for the game</summary> /// <param name="game">Game the service provider will be taken from</param> public ServiceProviderAdapter(Game game) { this.gameServices = game.Services; } /// <summary>Retrieves a service from the game service container</summary> /// <param name="serviceType">Type of the service that will be retrieved</param> /// <returns>The service that has been requested</returns> public object GetService(Type serviceType) { return this.gameServices; } /// <summary>Game services container of the Game instance</summary> private GameServiceContainer gameServices; } #endregion // class ServiceProviderAdapter #region class ContentManagerAdapter /// <summary>Delegates to the game's built-in ContentManager</summary> /// <remarks> /// This provides shared access to the game's ContentManager. A dependency /// injected class only needs to require the ISharedContentService in its /// constructor and the dependency injector will automatically resolve it /// to this adapter, which delegates to the Game's built-in content manager. /// </remarks> private class ContentManagerAdapter : ISharedContentService { /// <summary>Initializes a new shared content manager adapter</summary> /// <param name="game">Game the content manager will be taken from</param> public ContentManagerAdapter(Game game) { this.contentManager = game.Content; } /// <summary>Loads or accesses shared game content</summary> /// <typeparam name="AssetType">Type of the asset to be loaded or accessed</typeparam> /// <param name="assetName">Path and name of the requested asset</param> /// <returns>The requested asset from the the shared game content store</returns> public AssetType Load<AssetType>(string assetName) { return this.contentManager.Load<AssetType>(assetName); } /// <summary>The content manager this instance delegates to</summary> private ContentManager contentManager; } #endregion // class ContentManagerAdapter /// <summary>Initializes the dependency configuration</summary> public override void Load() { // Allows access to the game class for any components with a dependency // on the 'Game' or 'DependencyInjectionGame' classes. Bind<MasterEngine>().ToSelf().InSingletonScope(); Bind<NinjectGame>().To<MasterEngine>().InSingletonScope(); Bind<Game>().To<MasterEngine>().InSingletonScope(); // Let the dependency injector construct a graphics device manager for // all components depending on the IGraphicsDeviceService and // IGraphicsDeviceManager interfaces Bind<GraphicsDeviceManager>().ToSelf().InSingletonScope(); Bind<IGraphicsDeviceService>().To<GraphicsDeviceManager>().InSingletonScope(); Bind<IGraphicsDeviceManager>().To<GraphicsDeviceManager>().InSingletonScope(); // Some clever adapters that hand out the Game's IServiceProvider and allow // access to its built-in ContentManager Bind<IServiceProvider>().To<ServiceProviderAdapter>().InSingletonScope(); Bind<ISharedContentService>().To<ContentManagerAdapter>().InSingletonScope(); Bind<IInputReader>().To<UserInputReader>().InSingletonScope().WithConstructorArgument("keyMapping", Constants.DEFAULT_KEY_MAPPING); Bind<CachedContentLoader>().ToSelf().InSingletonScope().WithConstructorArgument("rootDir", "Content"); } } } } NinjectGame.cs /// <summary>Base class for Games making use of Ninject</summary> public class NinjectGame : Game { /// <summary>Initializes a new Ninject game instance</summary> /// <param name="kernel">Kernel the game has been created by</param> public NinjectGame(IKernel kernel) { Type ownType = this.GetType(); if(ownType != typeof(Game)) { kernel.Bind<NinjectGame>().To<MasterEngine>().InSingletonScope(); } kernel.Bind<Game>().To<NinjectGame>().InSingletonScope(); } } } // namespace Nuclex.DependencyInjection.Demo.Scaffolding When I try to get the CachedContentLoader, I get a stack overflow exception. I'm basing this off of this tutorial, but I really have no idea what I'm doing. Help?

  Read the article

• How do I fix the issue with tables in xsl-fo, please help...

  - by atrueguy

  <?xml version="1.0" encoding="ISO-8859-1"?> <?xml:stylesheet type="text/xsl" href="currency.xslt"?> <currencylist> <title>Currencies By Country</title> <countries> <country>Australia</country> <currency>Australian Dollar</currency> </countries> <countries> <country>Austria</country> <currency>Schilling</currency> </countries> <countries> <country>Belgium</country> <currency>Belgium Franc</currency> </countries> <countries> <country>Canada</country> <currency>Canadian Dollar</currency> </countries> <countries> <country>England</country> <currency>Pound</currency> </countries> <countries> <country>Fiji</country> <currency>Fijian Dollar</currency> </countries> <countries> <country>France</country> <currency>Franc</currency> </countries> <countries> <country>Germany</country> <currency>DMark</currency> </countries> <countries> <country>Hong Kong</country> <currency>Hong Kong Dollar</currency> </countries> <countries> <country>Italy</country> <currency>Lira</currency> </countries> <countries> <country>Japan</country> <currency>Yen</currency> </countries> <countries> <country>Netherlands</country> <currency>Guilder</currency> </countries> <countries> <country>Switzerland</country> <currency>SFranc</currency> </countries> <countries> <country>USA</country> <currency>Dollar</currency> </countries> </currencylist> This is my exact xml code. I have written a xsl-fo for this xml file and I am failing to produce the output in a table. please check and help me in this. ASAP. <?xml version="1.0"?> <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"> <xsl:template match="/"> <fo:root xmlns:fo="http://www.w3.org/1999/XSL/Format"> <fo:layout-master-set> <fo:simple-page-master master-name="Letter" page-height="11in" page-width="8.5in"> <fo:region-body region-name="only_region" margin="1in" background-color="#CCCCCC"/> </fo:simple-page-master> </fo:layout-master-set> <fo:page-sequence master-reference="Letter"> <fo:flow flow-name="only_region"> <fo:block text-align="left"><xsl:call-template name="show_title"/></fo:block> <fo:table-and-caption> <fo:table> <fo:table-column column-width="25mm"/> <fo:table-column column-width="25mm"/> <fo:table-column column-width="25mm"/> <fo:table-header> <fo:table-row> <fo:table-cell> <fo:block font-weight="bold">SI No</fo:block> </fo:table-cell> <fo:table-cell> <fo:block font-weight="bold">Country</fo:block> </fo:table-cell> <fo:table-cell> <fo:block font-weight="bold">Currency</fo:block> </fo:table-cell> </fo:table-row> </fo:table-header> <fo:table-body> <fo:table-row> <fo:table-cell> <fo:block><xsl:call-template name="select_position"/></fo:block> </fo:table-cell> <fo:table-cell> <fo:block><xsl:call-template name="select_country"/></fo:block> </fo:table-cell> <fo:table-cell> <fo:block><xsl:call-template name="select_currency"/></fo:block> </fo:table-cell> </fo:table-row> </fo:table-body> </fo:table> </fo:table-and-caption> </fo:flow> </fo:page-sequence> </fo:root> </xsl:template> <xsl:template name="show_title" match="currencylist"> <h2><xsl:value-of select="currencylist/title"/></h2> </xsl:template> <xsl:template name="select_position" match="currencylist"> <xsl:for-each select="currencylist/countries"> <xsl:value-of select="position()"/> </xsl:for-each> </xsl:template> <xsl:template name="select_country" match="currencylist"> <xsl:for-each select="currencylist/countries"> <xsl:value-of select="country"/> </xsl:for-each> </xsl:template> <xsl:template name="select_currency" match="currencylist"> <xsl:for-each select="currencylist/countries"> <xsl:value-of select="currency"/> </xsl:for-each> </xsl:template> </xsl:stylesheet> Kindly help me out in this to produce a output in the table.

  Read the article

• OpenCL: Strange buffer or image bahaviour with NVidia but not Amd

  - by Alex R.

  I have a big problem (on Linux): I create a buffer with defined data, then an OpenCL kernel takes this data and puts it into an image2d_t. When working on an AMD C50 (Fusion CPU/GPU) the program works as desired, but on my GeForce 9500 GT the given kernel computes the correct result very rarely. Sometimes the result is correct, but very often it is incorrect. Sometimes it depends on very strange changes like removing unused variable declarations or adding a newline. I realized that disabling the optimization will increase the probability to fail. I have the most actual display driver in both systems. Here is my reduced code: #include <CL/cl.h> #include <string> #include <iostream> #include <sstream> #include <cmath> void checkOpenCLErr(cl_int err, std::string name){ const char* errorString[] = { "CL_SUCCESS", "CL_DEVICE_NOT_FOUND", "CL_DEVICE_NOT_AVAILABLE", "CL_COMPILER_NOT_AVAILABLE", "CL_MEM_OBJECT_ALLOCATION_FAILURE", "CL_OUT_OF_RESOURCES", "CL_OUT_OF_HOST_MEMORY", "CL_PROFILING_INFO_NOT_AVAILABLE", "CL_MEM_COPY_OVERLAP", "CL_IMAGE_FORMAT_MISMATCH", "CL_IMAGE_FORMAT_NOT_SUPPORTED", "CL_BUILD_PROGRAM_FAILURE", "CL_MAP_FAILURE", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "CL_INVALID_VALUE", "CL_INVALID_DEVICE_TYPE", "CL_INVALID_PLATFORM", "CL_INVALID_DEVICE", "CL_INVALID_CONTEXT", "CL_INVALID_QUEUE_PROPERTIES", "CL_INVALID_COMMAND_QUEUE", "CL_INVALID_HOST_PTR", "CL_INVALID_MEM_OBJECT", "CL_INVALID_IMAGE_FORMAT_DESCRIPTOR", "CL_INVALID_IMAGE_SIZE", "CL_INVALID_SAMPLER", "CL_INVALID_BINARY", "CL_INVALID_BUILD_OPTIONS", "CL_INVALID_PROGRAM", "CL_INVALID_PROGRAM_EXECUTABLE", "CL_INVALID_KERNEL_NAME", "CL_INVALID_KERNEL_DEFINITION", "CL_INVALID_KERNEL", "CL_INVALID_ARG_INDEX", "CL_INVALID_ARG_VALUE", "CL_INVALID_ARG_SIZE", "CL_INVALID_KERNEL_ARGS", "CL_INVALID_WORK_DIMENSION", "CL_INVALID_WORK_GROUP_SIZE", "CL_INVALID_WORK_ITEM_SIZE", "CL_INVALID_GLOBAL_OFFSET", "CL_INVALID_EVENT_WAIT_LIST", "CL_INVALID_EVENT", "CL_INVALID_OPERATION", "CL_INVALID_GL_OBJECT", "CL_INVALID_BUFFER_SIZE", "CL_INVALID_MIP_LEVEL", "CL_INVALID_GLOBAL_WORK_SIZE", }; if (err != CL_SUCCESS) { std::stringstream str; str << errorString[-err] << " (" << err << ")"; throw std::string(name)+(str.str()); } } int main(){ try{ cl_context m_context; cl_platform_id* m_platforms; unsigned int m_numPlatforms; cl_command_queue m_queue; cl_device_id m_device; cl_int error = 0; // Used to handle error codes clGetPlatformIDs(0,NULL,&m_numPlatforms); m_platforms = new cl_platform_id[m_numPlatforms]; error = clGetPlatformIDs(m_numPlatforms,m_platforms,&m_numPlatforms); checkOpenCLErr(error, "getPlatformIDs"); // Device error = clGetDeviceIDs(m_platforms[0], CL_DEVICE_TYPE_GPU, 1, &m_device, NULL); checkOpenCLErr(error, "getDeviceIDs"); // Context cl_context_properties properties[] = { CL_CONTEXT_PLATFORM, (cl_context_properties)(m_platforms[0]), 0}; m_context = clCreateContextFromType(properties, CL_DEVICE_TYPE_GPU, NULL, NULL, NULL); // m_private->m_context = clCreateContext(properties, 1, &m_private->m_device, NULL, NULL, &error); checkOpenCLErr(error, "Create context"); // Command-queue m_queue = clCreateCommandQueue(m_context, m_device, 0, &error); checkOpenCLErr(error, "Create command queue"); //Build program and kernel const char* source = "#pragma OPENCL EXTENSION cl_khr_byte_addressable_store : enable\n" "\n" "__kernel void bufToImage(__global unsigned char* in, __write_only image2d_t out, const unsigned int offset_x, const unsigned int image_width , const unsigned int maxval ){\n" "\tint i = get_global_id(0);\n" "\tint j = get_global_id(1);\n" "\tint width = get_global_size(0);\n" "\tint height = get_global_size(1);\n" "\n" "\tint pos = j*image_width*3+(offset_x+i)*3;\n" "\tif( maxval < 256 ){\n" "\t\tfloat4 c = (float4)(in[pos],in[pos+1],in[pos+2],1.0f);\n" "\t\tc.x /= maxval;\n" "\t\tc.y /= maxval;\n" "\t\tc.z /= maxval;\n" "\t\twrite_imagef(out, (int2)(i,j), c);\n" "\t}else{\n" "\t\tfloat4 c = (float4)(255.0f*in[2*pos]+in[2*pos+1],255.0f*in[2*pos+2]+in[2*pos+3],255.0f*in[2*pos+4]+in[2*pos+5],1.0f);\n" "\t\tc.x /= maxval;\n" "\t\tc.y /= maxval;\n" "\t\tc.z /= maxval;\n" "\t\twrite_imagef(out, (int2)(i,j), c);\n" "\t}\n" "}\n" "\n" "__constant sampler_t imageSampler = CLK_NORMALIZED_COORDS_FALSE | CLK_ADDRESS_CLAMP_TO_EDGE | CLK_FILTER_NEAREST;\n" "\n" "__kernel void imageToBuf(__read_only image2d_t in, __global unsigned char* out, const unsigned int offset_x, const unsigned int image_width ){\n" "\tint i = get_global_id(0);\n" "\tint j = get_global_id(1);\n" "\tint pos = j*image_width*3+(offset_x+i)*3;\n" "\tfloat4 c = read_imagef(in, imageSampler, (int2)(i,j));\n" "\tif( c.x <= 1.0f && c.y <= 1.0f && c.z <= 1.0f ){\n" "\t\tout[pos] = c.x*255.0f;\n" "\t\tout[pos+1] = c.y*255.0f;\n" "\t\tout[pos+2] = c.z*255.0f;\n" "\t}else{\n" "\t\tout[pos] = 200.0f;\n" "\t\tout[pos+1] = 0.0f;\n" "\t\tout[pos+2] = 255.0f;\n" "\t}\n" "}\n"; cl_int err; cl_program prog = clCreateProgramWithSource(m_context,1,&source,NULL,&err); if( -err != CL_SUCCESS ) throw std::string("clCreateProgramWithSources"); err = clBuildProgram(prog,0,NULL,"-cl-opt-disable",NULL,NULL); if( -err != CL_SUCCESS ) throw std::string("clBuildProgram(fromSources)"); cl_kernel kernel = clCreateKernel(prog,"bufToImage",&err); checkOpenCLErr(err,"CreateKernel"); cl_uint imageWidth = 8; cl_uint imageHeight = 9; //Initialize datas cl_uint maxVal = 255; cl_uint offsetX = 0; int size = imageWidth*imageHeight*3; int resSize = imageWidth*imageHeight*4; cl_uchar* data = new cl_uchar[size]; cl_float* expectedData = new cl_float[resSize]; for( int i = 0,j=0; i < size; i++,j++ ){ data[i] = (cl_uchar)i; expectedData[j] = (cl_float)i/255.0f; if ( i%3 == 2 ){ j++; expectedData[j] = 1.0f; } } cl_mem inBuffer = clCreateBuffer(m_context,CL_MEM_READ_ONLY|CL_MEM_COPY_HOST_PTR,size*sizeof(cl_uchar),data,&err); checkOpenCLErr(err, "clCreateBuffer()"); clFinish(m_queue); cl_image_format imgFormat; imgFormat.image_channel_order = CL_RGBA; imgFormat.image_channel_data_type = CL_FLOAT; cl_mem outImg = clCreateImage2D( m_context, CL_MEM_READ_WRITE, &imgFormat, imageWidth, imageHeight, 0, NULL, &err ); checkOpenCLErr(err,"get2DImage()"); clFinish(m_queue); size_t kernelRegion[]={imageWidth,imageHeight}; size_t kernelWorkgroup[]={1,1}; //Fill kernel with data clSetKernelArg(kernel,0,sizeof(cl_mem),&inBuffer); clSetKernelArg(kernel,1,sizeof(cl_mem),&outImg); clSetKernelArg(kernel,2,sizeof(cl_uint),&offsetX); clSetKernelArg(kernel,3,sizeof(cl_uint),&imageWidth); clSetKernelArg(kernel,4,sizeof(cl_uint),&maxVal); //Run kernel err = clEnqueueNDRangeKernel(m_queue,kernel,2,NULL,kernelRegion,kernelWorkgroup,0,NULL,NULL); checkOpenCLErr(err,"RunKernel"); clFinish(m_queue); //Check resulting data for validty cl_float* computedData = new cl_float[resSize];; size_t region[]={imageWidth,imageHeight,1}; const size_t offset[] = {0,0,0}; err = clEnqueueReadImage(m_queue,outImg,CL_TRUE,offset,region,0,0,computedData,0,NULL,NULL); checkOpenCLErr(err, "readDataFromImage()"); clFinish(m_queue); for( int i = 0; i < resSize; i++ ){ if( fabs(expectedData[i]-computedData[i])>0.1 ){ std::cout << "Expected: \n"; for( int j = 0; j < resSize; j++ ){ std::cout << expectedData[j] << " "; } std::cout << "\nComputed: \n"; std::cout << "\n"; for( int j = 0; j < resSize; j++ ){ std::cout << computedData[j] << " "; } std::cout << "\n"; throw std::string("Error, computed and expected data are not the same!\n"); } } }catch(std::string& e){ std::cout << "\nCaught an exception: " << e << "\n"; return 1; } std::cout << "Works fine\n"; return 0; } I also uploaded the source code for you to make it easier to test it: http://www.file-upload.net/download-3513797/strangeOpenCLError.cpp.html Please can you tell me if I've done wrong anything? Is there any mistake in the code or is this a bug in my driver? Best reagards, Alex

  Read the article

• Using R to Analyze G1GC Log Files

  - by user12620111

  Using R to Analyze G1GC Log Files body, td { font-family: sans-serif; background-color: white; font-size: 12px; margin: 8px; } tt, code, pre { font-family: 'DejaVu Sans Mono', 'Droid Sans Mono', 'Lucida Console', Consolas, Monaco, monospace; } h1 { font-size:2.2em; } h2 { font-size:1.8em; } h3 { font-size:1.4em; } h4 { font-size:1.0em; } h5 { font-size:0.9em; } h6 { font-size:0.8em; } a:visited { color: rgb(50%, 0%, 50%); } pre { margin-top: 0; max-width: 95%; border: 1px solid #ccc; white-space: pre-wrap; } pre code { display: block; padding: 0.5em; } code.r, code.cpp { background-color: #F8F8F8; } table, td, th { border: none; } blockquote { color:#666666; margin:0; padding-left: 1em; border-left: 0.5em #EEE solid; } hr { height: 0px; border-bottom: none; border-top-width: thin; border-top-style: dotted; border-top-color: #999999; } @media print { * { background: transparent !important; color: black !important; filter:none !important; -ms-filter: none !important; } body { font-size:12pt; max-width:100%; } a, a:visited { text-decoration: underline; } hr { visibility: hidden; page-break-before: always; } pre, blockquote { padding-right: 1em; page-break-inside: avoid; } tr, img { page-break-inside: avoid; } img { max-width: 100% !important; } @page :left { margin: 15mm 20mm 15mm 10mm; } @page :right { margin: 15mm 10mm 15mm 20mm; } p, h2, h3 { orphans: 3; widows: 3; } h2, h3 { page-break-after: avoid; } } pre .operator, pre .paren { color: rgb(104, 118, 135) } pre .literal { color: rgb(88, 72, 246) } pre .number { color: rgb(0, 0, 205); } pre .comment { color: rgb(76, 136, 107); } pre .keyword { color: rgb(0, 0, 255); } pre .identifier { color: rgb(0, 0, 0); } pre .string { color: rgb(3, 106, 7); } var hljs=new function(){function m(p){return p.replace(/&/gm,"&").replace(/"}while(y.length||w.length){var v=u().splice(0,1)[0];z+=m(x.substr(q,v.offset-q));q=v.offset;if(v.event=="start"){z+=t(v.node);s.push(v.node)}else{if(v.event=="stop"){var p,r=s.length;do{r--;p=s[r];z+=("")}while(p!=v.node);s.splice(r,1);while(r'+M[0]+""}else{r+=M[0]}O=P.lR.lastIndex;M=P.lR.exec(L)}return r+L.substr(O,L.length-O)}function J(L,M){if(M.sL&&e[M.sL]){var r=d(M.sL,L);x+=r.keyword_count;return r.value}else{return F(L,M)}}function I(M,r){var L=M.cN?'':"";if(M.rB){y+=L;M.buffer=""}else{if(M.eB){y+=m(r)+L;M.buffer=""}else{y+=L;M.buffer=r}}D.push(M);A+=M.r}function G(N,M,Q){var R=D[D.length-1];if(Q){y+=J(R.buffer+N,R);return false}var P=q(M,R);if(P){y+=J(R.buffer+N,R);I(P,M);return P.rB}var L=v(D.length-1,M);if(L){var O=R.cN?"":"";if(R.rE){y+=J(R.buffer+N,R)+O}else{if(R.eE){y+=J(R.buffer+N,R)+O+m(M)}else{y+=J(R.buffer+N+M,R)+O}}while(L1){O=D[D.length-2].cN?"":"";y+=O;L--;D.length--}var r=D[D.length-1];D.length--;D[D.length-1].buffer="";if(r.starts){I(r.starts,"")}return R.rE}if(w(M,R)){throw"Illegal"}}var E=e[B];var D=[E.dM];var A=0;var x=0;var y="";try{var s,u=0;E.dM.buffer="";do{s=p(C,u);var t=G(s[0],s[1],s[2]);u+=s[0].length;if(!t){u+=s[1].length}}while(!s[2]);if(D.length1){throw"Illegal"}return{r:A,keyword_count:x,value:y}}catch(H){if(H=="Illegal"){return{r:0,keyword_count:0,value:m(C)}}else{throw H}}}function g(t){var p={keyword_count:0,r:0,value:m(t)};var r=p;for(var q in e){if(!e.hasOwnProperty(q)){continue}var s=d(q,t);s.language=q;if(s.keyword_count+s.rr.keyword_count+r.r){r=s}if(s.keyword_count+s.rp.keyword_count+p.r){r=p;p=s}}if(r.language){p.second_best=r}return p}function i(r,q,p){if(q){r=r.replace(/^((]+|\t)+)/gm,function(t,w,v,u){return w.replace(/\t/g,q)})}if(p){r=r.replace(/\n/g,"")}return r}function n(t,w,r){var x=h(t,r);var v=a(t);var y,s;if(v){y=d(v,x)}else{return}var q=c(t);if(q.length){s=document.createElement("pre");s.innerHTML=y.value;y.value=k(q,c(s),x)}y.value=i(y.value,w,r);var u=t.className;if(!u.match("(\\s|^)(language-)?"+v+"(\\s|$)")){u=u?(u+" "+v):v}if(/MSIE [678]/.test(navigator.userAgent)&&t.tagName=="CODE"&&t.parentNode.tagName=="PRE"){s=t.parentNode;var p=document.createElement("div");p.innerHTML=""+y.value+"";t=p.firstChild.firstChild;p.firstChild.cN=s.cN;s.parentNode.replaceChild(p.firstChild,s)}else{t.innerHTML=y.value}t.className=u;t.result={language:v,kw:y.keyword_count,re:y.r};if(y.second_best){t.second_best={language:y.second_best.language,kw:y.second_best.keyword_count,re:y.second_best.r}}}function o(){if(o.called){return}o.called=true;var r=document.getElementsByTagName("pre");for(var p=0;p|=||=||=|\\?|\\[|\\{|\\(|\\^|\\^=|\\||\\|=|\\|\\||~";this.ER="(?![\\s\\S])";this.BE={b:"\\\\.",r:0};this.ASM={cN:"string",b:"'",e:"'",i:"\\n",c:[this.BE],r:0};this.QSM={cN:"string",b:'"',e:'"',i:"\\n",c:[this.BE],r:0};this.CLCM={cN:"comment",b:"//",e:"$"};this.CBLCLM={cN:"comment",b:"/\\*",e:"\\*/"};this.HCM={cN:"comment",b:"#",e:"$"};this.NM={cN:"number",b:this.NR,r:0};this.CNM={cN:"number",b:this.CNR,r:0};this.BNM={cN:"number",b:this.BNR,r:0};this.inherit=function(r,s){var p={};for(var q in r){p[q]=r[q]}if(s){for(var q in s){p[q]=s[q]}}return p}}();hljs.LANGUAGES.cpp=function(){var a={keyword:{"false":1,"int":1,"float":1,"while":1,"private":1,"char":1,"catch":1,"export":1,virtual:1,operator:2,sizeof:2,dynamic_cast:2,typedef:2,const_cast:2,"const":1,struct:1,"for":1,static_cast:2,union:1,namespace:1,unsigned:1,"long":1,"throw":1,"volatile":2,"static":1,"protected":1,bool:1,template:1,mutable:1,"if":1,"public":1,friend:2,"do":1,"return":1,"goto":1,auto:1,"void":2,"enum":1,"else":1,"break":1,"new":1,extern:1,using:1,"true":1,"class":1,asm:1,"case":1,typeid:1,"short":1,reinterpret_cast:2,"default":1,"double":1,register:1,explicit:1,signed:1,typename:1,"try":1,"this":1,"switch":1,"continue":1,wchar_t:1,inline:1,"delete":1,alignof:1,char16_t:1,char32_t:1,constexpr:1,decltype:1,noexcept:1,nullptr:1,static_assert:1,thread_local:1,restrict:1,_Bool:1,complex:1},built_in:{std:1,string:1,cin:1,cout:1,cerr:1,clog:1,stringstream:1,istringstream:1,ostringstream:1,auto_ptr:1,deque:1,list:1,queue:1,stack:1,vector:1,map:1,set:1,bitset:1,multiset:1,multimap:1,unordered_set:1,unordered_map:1,unordered_multiset:1,unordered_multimap:1,array:1,shared_ptr:1}};return{dM:{k:a,i:"",k:a,r:10,c:["self"]}]}}}();hljs.LANGUAGES.r={dM:{c:[hljs.HCM,{cN:"number",b:"\\b0[xX][0-9a-fA-F]+[Li]?\\b",e:hljs.IMMEDIATE_RE,r:0},{cN:"number",b:"\\b\\d+(?:[eE][+\\-]?\\d*)?L\\b",e:hljs.IMMEDIATE_RE,r:0},{cN:"number",b:"\\b\\d+\\.(?!\\d)(?:i\\b)?",e:hljs.IMMEDIATE_RE,r:1},{cN:"number",b:"\\b\\d+(?:\\.\\d*)?(?:[eE][+\\-]?\\d*)?i?\\b",e:hljs.IMMEDIATE_RE,r:0},{cN:"number",b:"\\.\\d+(?:[eE][+\\-]?\\d*)?i?\\b",e:hljs.IMMEDIATE_RE,r:1},{cN:"keyword",b:"(?:tryCatch|library|setGeneric|setGroupGeneric)\\b",e:hljs.IMMEDIATE_RE,r:10},{cN:"keyword",b:"\\.\\.\\.",e:hljs.IMMEDIATE_RE,r:10},{cN:"keyword",b:"\\.\\.\\d+(?![\\w.])",e:hljs.IMMEDIATE_RE,r:10},{cN:"keyword",b:"\\b(?:function)",e:hljs.IMMEDIATE_RE,r:2},{cN:"keyword",b:"(?:if|in|break|next|repeat|else|for|return|switch|while|try|stop|warning|require|attach|detach|source|setMethod|setClass)\\b",e:hljs.IMMEDIATE_RE,r:1},{cN:"literal",b:"(?:NA|NA_integer_|NA_real_|NA_character_|NA_complex_)\\b",e:hljs.IMMEDIATE_RE,r:10},{cN:"literal",b:"(?:NULL|TRUE|FALSE|T|F|Inf|NaN)\\b",e:hljs.IMMEDIATE_RE,r:1},{cN:"identifier",b:"[a-zA-Z.][a-zA-Z0-9._]*\\b",e:hljs.IMMEDIATE_RE,r:0},{cN:"operator",b:"|=||   Using R to Analyze G1GC Log Files   Using R to Analyze G1GC Log Files Introduction Working in Oracle Platform Integration gives an engineer opportunities to work on a wide array of technologies. My team’s goal is to make Oracle applications run best on the Solaris/SPARC platform. When looking for bottlenecks in a modern applications, one needs to be aware of not only how the CPUs and operating system are executing, but also network, storage, and in some cases, the Java Virtual Machine. I was recently presented with about 1.5 GB of Java Garbage First Garbage Collector log file data. If you’re not familiar with the subject, you might want to review Garbage First Garbage Collector Tuning by Monica Beckwith. The customer had been running Java HotSpot 1.6.0_31 to host a web application server. I was told that the Solaris/SPARC server was running a Java process launched using a commmand line that included the following flags: -d64 -Xms9g -Xmx9g -XX:+UseG1GC -XX:MaxGCPauseMillis=200 -XX:InitiatingHeapOccupancyPercent=80 -XX:PermSize=256m -XX:MaxPermSize=256m -XX:+PrintGC -XX:+PrintGCTimeStamps -XX:+PrintHeapAtGC -XX:+PrintGCDateStamps -XX:+PrintFlagsFinal -XX:+DisableExplicitGC -XX:+UnlockExperimentalVMOptions -XX:ParallelGCThreads=8 Several sources on the internet indicate that if I were to print out the 1.5 GB of log files, it would require enough paper to fill the bed of a pick up truck. Of course, it would be fruitless to try to scan the log files by hand. Tools will be required to summarize the contents of the log files. Others have encountered large Java garbage collection log files. There are existing tools to analyze the log files: IBM’s GC toolkit The chewiebug GCViewer gchisto HPjmeter Instead of using one of the other tools listed, I decide to parse the log files with standard Unix tools, and analyze the data with R. Data Cleansing The log files arrived in two different formats. I guess that the difference is that one set of log files was generated using a more verbose option, maybe -XX:+PrintHeapAtGC, and the other set of log files was generated without that option. Format 1 In some of the log files, the log files with the less verbose format, a single trace, i.e. the report of a singe garbage collection event, looks like this: {Heap before GC invocations=12280 (full 61): garbage-first heap total 9437184K, used 7499918K [0xfffffffd00000000, 0xffffffff40000000, 0xffffffff40000000) region size 4096K, 1 young (4096K), 0 survivors (0K) compacting perm gen total 262144K, used 144077K [0xffffffff40000000, 0xffffffff50000000, 0xffffffff50000000) the space 262144K, 54% used [0xffffffff40000000, 0xffffffff48cb3758, 0xffffffff48cb3800, 0xffffffff50000000) No shared spaces configured. 2014-05-14T07:24:00.988-0700: 60586.353: [GC pause (young) 7324M->7320M(9216M), 0.1567265 secs] Heap after GC invocations=12281 (full 61): garbage-first heap total 9437184K, used 7496533K [0xfffffffd00000000, 0xffffffff40000000, 0xffffffff40000000) region size 4096K, 0 young (0K), 0 survivors (0K) compacting perm gen total 262144K, used 144077K [0xffffffff40000000, 0xffffffff50000000, 0xffffffff50000000) the space 262144K, 54% used [0xffffffff40000000, 0xffffffff48cb3758, 0xffffffff48cb3800, 0xffffffff50000000) No shared spaces configured. } A simple grep can be used to extract a summary: $ grep "\[ GC pause (young" g1gc.log 2014-05-13T13:24:35.091-0700: 3.109: [GC pause (young) 20M->5029K(9216M), 0.0146328 secs] 2014-05-13T13:24:35.440-0700: 3.459: [GC pause (young) 9125K->6077K(9216M), 0.0086723 secs] 2014-05-13T13:24:37.581-0700: 5.599: [GC pause (young) 25M->8470K(9216M), 0.0203820 secs] 2014-05-13T13:24:42.686-0700: 10.704: [GC pause (young) 44M->15M(9216M), 0.0288848 secs] 2014-05-13T13:24:48.941-0700: 16.958: [GC pause (young) 51M->20M(9216M), 0.0491244 secs] 2014-05-13T13:24:56.049-0700: 24.066: [GC pause (young) 92M->26M(9216M), 0.0525368 secs] 2014-05-13T13:25:34.368-0700: 62.383: [GC pause (young) 602M->68M(9216M), 0.1721173 secs] But that format wasn't easily read into R, so I needed to be a bit more tricky. I used the following Unix command to create a summary file that was easy for R to read. $ echo "SecondsSinceLaunch BeforeSize AfterSize TotalSize RealTime" $ grep "\[GC pause (young" g1gc.log | grep -v mark | sed -e 's/[A-SU-z\(\),]/ /g' -e 's/->/ /' -e 's/: / /g' | more SecondsSinceLaunch BeforeSize AfterSize TotalSize RealTime 2014-05-13T13:24:35.091-0700 3.109 20 5029 9216 0.0146328 2014-05-13T13:24:35.440-0700 3.459 9125 6077 9216 0.0086723 2014-05-13T13:24:37.581-0700 5.599 25 8470 9216 0.0203820 2014-05-13T13:24:42.686-0700 10.704 44 15 9216 0.0288848 2014-05-13T13:24:48.941-0700 16.958 51 20 9216 0.0491244 2014-05-13T13:24:56.049-0700 24.066 92 26 9216 0.0525368 2014-05-13T13:25:34.368-0700 62.383 602 68 9216 0.1721173 Format 2 In some of the log files, the log files with the more verbose format, a single trace, i.e. the report of a singe garbage collection event, was more complicated than Format 1. Here is a text file with an example of a single G1GC trace in the second format. As you can see, it is quite complicated. It is nice that there is so much information available, but the level of detail can be overwhelming. I wrote this awk script (download) to summarize each trace on a single line. #!/usr/bin/env awk -f BEGIN { printf("SecondsSinceLaunch IncrementalCount FullCount UserTime SysTime RealTime BeforeSize AfterSize TotalSize\n") } ###################### # Save count data from lines that are at the start of each G1GC trace. # Each trace starts out like this: # {Heap before GC invocations=14 (full 0): # garbage-first heap total 9437184K, used 325496K [0xfffffffd00000000, 0xffffffff40000000, 0xffffffff40000000) ###################### /{Heap.*full/{ gsub ( "\\)" , "" ); nf=split($0,a,"="); split(a[2],b," "); getline; if ( match($0, "first") ) { G1GC=1; IncrementalCount=b[1]; FullCount=substr( b[3], 1, length(b[3])-1 ); } else { G1GC=0; } } ###################### # Pull out time stamps that are in lines with this format: # 2014-05-12T14:02:06.025-0700: 94.312: [GC pause (young), 0.08870154 secs] ###################### /GC pause/ { DateTime=$1; SecondsSinceLaunch=substr($2, 1, length($2)-1); } ###################### # Heap sizes are in lines that look like this: # [ 4842M->4838M(9216M)] ###################### /\[ .*]$/ { gsub ( "\\[" , "" ); gsub ( "\ \]" , "" ); gsub ( "->" , " " ); gsub ( "\\( " , " " ); gsub ( "\ \)" , " " ); split($0,a," "); if ( split(a[1],b,"M") > 1 ) {BeforeSize=b[1]*1024;} if ( split(a[1],b,"K") > 1 ) {BeforeSize=b[1];} if ( split(a[2],b,"M") > 1 ) {AfterSize=b[1]*1024;} if ( split(a[2],b,"K") > 1 ) {AfterSize=b[1];} if ( split(a[3],b,"M") > 1 ) {TotalSize=b[1]*1024;} if ( split(a[3],b,"K") > 1 ) {TotalSize=b[1];} } ###################### # Emit an output line when you find input that looks like this: # [Times: user=1.41 sys=0.08, real=0.24 secs] ###################### /\[Times/ { if (G1GC==1) { gsub ( "," , "" ); split($2,a,"="); UserTime=a[2]; split($3,a,"="); SysTime=a[2]; split($4,a,"="); RealTime=a[2]; print DateTime,SecondsSinceLaunch,IncrementalCount,FullCount,UserTime,SysTime,RealTime,BeforeSize,AfterSize,TotalSize; G1GC=0; } } The resulting summary is about 25X smaller that the original file, but still difficult for a human to digest. SecondsSinceLaunch IncrementalCount FullCount UserTime SysTime RealTime BeforeSize AfterSize TotalSize ... 2014-05-12T18:36:34.669-0700: 3985.744 561 0 0.57 0.06 0.16 1724416 1720320 9437184 2014-05-12T18:36:34.839-0700: 3985.914 562 0 0.51 0.06 0.19 1724416 1720320 9437184 2014-05-12T18:36:35.069-0700: 3986.144 563 0 0.60 0.04 0.27 1724416 1721344 9437184 2014-05-12T18:36:35.354-0700: 3986.429 564 0 0.33 0.04 0.09 1725440 1722368 9437184 2014-05-12T18:36:35.545-0700: 3986.620 565 0 0.58 0.04 0.17 1726464 1722368 9437184 2014-05-12T18:36:35.726-0700: 3986.801 566 0 0.43 0.05 0.12 1726464 1722368 9437184 2014-05-12T18:36:35.856-0700: 3986.930 567 0 0.30 0.04 0.07 1726464 1723392 9437184 2014-05-12T18:36:35.947-0700: 3987.023 568 0 0.61 0.04 0.26 1727488 1723392 9437184 2014-05-12T18:36:36.228-0700: 3987.302 569 0 0.46 0.04 0.16 1731584 1724416 9437184 Reading the Data into R Once the GC log data had been cleansed, either by processing the first format with the shell script, or by processing the second format with the awk script, it was easy to read the data into R. g1gc.df = read.csv("summary.txt", row.names = NULL, stringsAsFactors=FALSE,sep="") str(g1gc.df) ## 'data.frame': 8307 obs. of 10 variables: ## $ row.names : chr "2014-05-12T14:00:32.868-0700:" "2014-05-12T14:00:33.179-0700:" "2014-05-12T14:00:33.677-0700:" "2014-05-12T14:00:35.538-0700:" ... ## $ SecondsSinceLaunch: num 1.16 1.47 1.97 3.83 6.1 ... ## $ IncrementalCount : int 0 1 2 3 4 5 6 7 8 9 ... ## $ FullCount : int 0 0 0 0 0 0 0 0 0 0 ... ## $ UserTime : num 0.11 0.05 0.04 0.21 0.08 0.26 0.31 0.33 0.34 0.56 ... ## $ SysTime : num 0.04 0.01 0.01 0.05 0.01 0.06 0.07 0.06 0.07 0.09 ... ## $ RealTime : num 0.02 0.02 0.01 0.04 0.02 0.04 0.05 0.04 0.04 0.06 ... ## $ BeforeSize : int 8192 5496 5768 22528 24576 43008 34816 53248 55296 93184 ... ## $ AfterSize : int 1400 1672 2557 4907 7072 14336 16384 18432 19456 21504 ... ## $ TotalSize : int 9437184 9437184 9437184 9437184 9437184 9437184 9437184 9437184 9437184 9437184 ... head(g1gc.df) ## row.names SecondsSinceLaunch IncrementalCount ## 1 2014-05-12T14:00:32.868-0700: 1.161 0 ## 2 2014-05-12T14:00:33.179-0700: 1.472 1 ## 3 2014-05-12T14:00:33.677-0700: 1.969 2 ## 4 2014-05-12T14:00:35.538-0700: 3.830 3 ## 5 2014-05-12T14:00:37.811-0700: 6.103 4 ## 6 2014-05-12T14:00:41.428-0700: 9.720 5 ## FullCount UserTime SysTime RealTime BeforeSize AfterSize TotalSize ## 1 0 0.11 0.04 0.02 8192 1400 9437184 ## 2 0 0.05 0.01 0.02 5496 1672 9437184 ## 3 0 0.04 0.01 0.01 5768 2557 9437184 ## 4 0 0.21 0.05 0.04 22528 4907 9437184 ## 5 0 0.08 0.01 0.02 24576 7072 9437184 ## 6 0 0.26 0.06 0.04 43008 14336 9437184 Basic Statistics Once the data has been read into R, simple statistics are very easy to generate. All of the numbers from high school statistics are available via simple commands. For example, generate a summary of every column: summary(g1gc.df) ## row.names SecondsSinceLaunch IncrementalCount FullCount ## Length:8307 Min. : 1 Min. : 0 Min. : 0.0 ## Class :character 1st Qu.: 9977 1st Qu.:2048 1st Qu.: 0.0 ## Mode :character Median :12855 Median :4136 Median : 12.0 ## Mean :12527 Mean :4156 Mean : 31.6 ## 3rd Qu.:15758 3rd Qu.:6262 3rd Qu.: 61.0 ## Max. :55484 Max. :8391 Max. :113.0 ## UserTime SysTime RealTime BeforeSize ## Min. :0.040 Min. :0.0000 Min. : 0.0 Min. : 5476 ## 1st Qu.:0.470 1st Qu.:0.0300 1st Qu.: 0.1 1st Qu.:5137920 ## Median :0.620 Median :0.0300 Median : 0.1 Median :6574080 ## Mean :0.751 Mean :0.0355 Mean : 0.3 Mean :5841855 ## 3rd Qu.:0.920 3rd Qu.:0.0400 3rd Qu.: 0.2 3rd Qu.:7084032 ## Max. :3.370 Max. :1.5600 Max. :488.1 Max. :8696832 ## AfterSize TotalSize ## Min. : 1380 Min. :9437184 ## 1st Qu.:5002752 1st Qu.:9437184 ## Median :6559744 Median :9437184 ## Mean :5785454 Mean :9437184 ## 3rd Qu.:7054336 3rd Qu.:9437184 ## Max. :8482816 Max. :9437184 Q: What is the total amount of User CPU time spent in garbage collection? sum(g1gc.df$UserTime) ## [1] 6236 As you can see, less than two hours of CPU time was spent in garbage collection. Is that too much? To find the percentage of time spent in garbage collection, divide the number above by total_elapsed_time*CPU_count. In this case, there are a lot of CPU’s and it turns out the the overall amount of CPU time spent in garbage collection isn’t a problem when viewed in isolation. When calculating rates, i.e. events per unit time, you need to ask yourself if the rate is homogenous across the time period in the log file. Does the log file include spikes of high activity that should be separately analyzed? Averaging in data from nights and weekends with data from business hours may alias problems. If you have a reason to suspect that the garbage collection rates include peaks and valleys that need independent analysis, see the “Time Series” section, below. Q: How much garbage is collected on each pass? The amount of heap space that is recovered per GC pass is surprisingly low: At least one collection didn’t recover any data. (“Min.=0”) 25% of the passes recovered 3MB or less. (“1st Qu.=3072”) Half of the GC passes recovered 4MB or less. (“Median=4096”) The average amount recovered was 56MB. (“Mean=56390”) 75% of the passes recovered 36MB or less. (“3rd Qu.=36860”) At least one pass recovered 2GB. (“Max.=2121000”) g1gc.df$Delta = g1gc.df$BeforeSize - g1gc.df$AfterSize summary(g1gc.df$Delta) ## Min. 1st Qu. Median Mean 3rd Qu. Max. ## 0 3070 4100 56400 36900 2120000 Q: What is the maximum User CPU time for a single collection? The worst garbage collection (“Max.”) is many standard deviations away from the mean. The data appears to be right skewed. summary(g1gc.df$UserTime) ## Min. 1st Qu. Median Mean 3rd Qu. Max. ## 0.040 0.470 0.620 0.751 0.920 3.370 sd(g1gc.df$UserTime) ## [1] 0.3966 Basic Graphics Once the data is in R, it is trivial to plot the data with formats including dot plots, line charts, bar charts (simple, stacked, grouped), pie charts, boxplots, scatter plots histograms, and kernel density plots. Histogram of User CPU Time per Collection I don't think that this graph requires any explanation. hist(g1gc.df$UserTime, main="User CPU Time per Collection", xlab="Seconds", ylab="Frequency") Box plot to identify outliers When the initial data is viewed with a box plot, you can see the one crazy outlier in the real time per GC. Save this data point for future analysis and drop the outlier so that it’s not throwing off our statistics. Now the box plot shows many outliers, which will be examined later, using times series analysis. Notice that the scale of the x-axis changes drastically once the crazy outlier is removed. par(mfrow=c(2,1)) boxplot(g1gc.df$UserTime,g1gc.df$SysTime,g1gc.df$RealTime, main="Box Plot of Time per GC\n(dominated by a crazy outlier)", names=c("usr","sys","elapsed"), xlab="Seconds per GC", ylab="Time (Seconds)", horizontal = TRUE, outcol="red") crazy.outlier.df=g1gc.df[g1gc.df$RealTime > 400,] g1gc.df=g1gc.df[g1gc.df$RealTime < 400,] boxplot(g1gc.df$UserTime,g1gc.df$SysTime,g1gc.df$RealTime, main="Box Plot of Time per GC\n(crazy outlier excluded)", names=c("usr","sys","elapsed"), xlab="Seconds per GC", ylab="Time (Seconds)", horizontal = TRUE, outcol="red") box(which = "outer", lty = "solid") Here is the crazy outlier for future analysis: crazy.outlier.df ## row.names SecondsSinceLaunch IncrementalCount ## 8233 2014-05-12T23:15:43.903-0700: 20741 8316 ## FullCount UserTime SysTime RealTime BeforeSize AfterSize TotalSize ## 8233 112 0.55 0.42 488.1 8381440 8235008 9437184 ## Delta ## 8233 146432 R Time Series Data To analyze the garbage collection as a time series, I’ll use Z’s Ordered Observations (zoo). “zoo is the creator for an S3 class of indexed totally ordered observations which includes irregular time series.” require(zoo) ## Loading required package: zoo ## ## Attaching package: 'zoo' ## ## The following objects are masked from 'package:base': ## ## as.Date, as.Date.numeric head(g1gc.df[,1]) ## [1] "2014-05-12T14:00:32.868-0700:" "2014-05-12T14:00:33.179-0700:" ## [3] "2014-05-12T14:00:33.677-0700:" "2014-05-12T14:00:35.538-0700:" ## [5] "2014-05-12T14:00:37.811-0700:" "2014-05-12T14:00:41.428-0700:" options("digits.secs"=3) times=as.POSIXct( g1gc.df[,1], format="%Y-%m-%dT%H:%M:%OS%z:") g1gc.z = zoo(g1gc.df[,-c(1)], order.by=times) head(g1gc.z) ## SecondsSinceLaunch IncrementalCount FullCount ## 2014-05-12 17:00:32.868 1.161 0 0 ## 2014-05-12 17:00:33.178 1.472 1 0 ## 2014-05-12 17:00:33.677 1.969 2 0 ## 2014-05-12 17:00:35.538 3.830 3 0 ## 2014-05-12 17:00:37.811 6.103 4 0 ## 2014-05-12 17:00:41.427 9.720 5 0 ## UserTime SysTime RealTime BeforeSize AfterSize ## 2014-05-12 17:00:32.868 0.11 0.04 0.02 8192 1400 ## 2014-05-12 17:00:33.178 0.05 0.01 0.02 5496 1672 ## 2014-05-12 17:00:33.677 0.04 0.01 0.01 5768 2557 ## 2014-05-12 17:00:35.538 0.21 0.05 0.04 22528 4907 ## 2014-05-12 17:00:37.811 0.08 0.01 0.02 24576 7072 ## 2014-05-12 17:00:41.427 0.26 0.06 0.04 43008 14336 ## TotalSize Delta ## 2014-05-12 17:00:32.868 9437184 6792 ## 2014-05-12 17:00:33.178 9437184 3824 ## 2014-05-12 17:00:33.677 9437184 3211 ## 2014-05-12 17:00:35.538 9437184 17621 ## 2014-05-12 17:00:37.811 9437184 17504 ## 2014-05-12 17:00:41.427 9437184 28672 Example of Two Benchmark Runs in One Log File The data in the following graph is from a different log file, not the one of primary interest to this article. I’m including this image because it is an example of idle periods followed by busy periods. It would be uninteresting to average the rate of garbage collection over the entire log file period. More interesting would be the rate of garbage collect in the two busy periods. Are they the same or different? Your production data may be similar, for example, bursts when employees return from lunch and idle times on weekend evenings, etc. Once the data is in an R Time Series, you can analyze isolated time windows. Clipping the Time Series data Flashing back to our test case… Viewing the data as a time series is interesting. You can see that the work intensive time period is between 9:00 PM and 3:00 AM. Lets clip the data to the interesting period:     par(mfrow=c(2,1)) plot(g1gc.z$UserTime, type="h", main="User Time per GC\nTime: Complete Log File", xlab="Time of Day", ylab="CPU Seconds per GC", col="#1b9e77") clipped.g1gc.z=window(g1gc.z, start=as.POSIXct("2014-05-12 21:00:00"), end=as.POSIXct("2014-05-13 03:00:00")) plot(clipped.g1gc.z$UserTime, type="h", main="User Time per GC\nTime: Limited to Benchmark Execution", xlab="Time of Day", ylab="CPU Seconds per GC", col="#1b9e77") box(which = "outer", lty = "solid") Cumulative Incremental and Full GC count Here is the cumulative incremental and full GC count. When the line is very steep, it indicates that the GCs are repeating very quickly. Notice that the scale on the Y axis is different for full vs. incremental. plot(clipped.g1gc.z[,c(2:3)], main="Cumulative Incremental and Full GC count", xlab="Time of Day", col="#1b9e77") GC Analysis of Benchmark Execution using Time Series data In the following series of 3 graphs: The “After Size” show the amount of heap space in use after each garbage collection. Many Java objects are still referenced, i.e. alive, during each garbage collection. This may indicate that the application has a memory leak, or may indicate that the application has a very large memory footprint. Typically, an application's memory footprint plateau's in the early stage of execution. One would expect this graph to have a flat top. The steep decline in the heap space may indicate that the application crashed after 2:00. The second graph shows that the outliers in real execution time, discussed above, occur near 2:00. when the Java heap seems to be quite full. The third graph shows that Full GCs are infrequent during the first few hours of execution. The rate of Full GC's, (the slope of the cummulative Full GC line), changes near midnight.   plot(clipped.g1gc.z[,c("AfterSize","RealTime","FullCount")], xlab="Time of Day", col=c("#1b9e77","red","#1b9e77")) GC Analysis of heap recovered Each GC trace includes the amount of heap space in use before and after the individual GC event. During garbage coolection, unreferenced objects are identified, the space holding the unreferenced objects is freed, and thus, the difference in before and after usage indicates how much space has been freed. The following box plot and bar chart both demonstrate the same point - the amount of heap space freed per garbage colloection is surprisingly low. par(mfrow=c(2,1)) boxplot(as.vector(clipped.g1gc.z$Delta), main="Amount of Heap Recovered per GC Pass", xlab="Size in KB", horizontal = TRUE, col="red") hist(as.vector(clipped.g1gc.z$Delta), main="Amount of Heap Recovered per GC Pass", xlab="Size in KB", breaks=100, col="red") box(which = "outer", lty = "solid") This graph is the most interesting. The dark blue area shows how much heap is occupied by referenced Java objects. This represents memory that holds live data. The red fringe at the top shows how much data was recovered after each garbage collection. barplot(clipped.g1gc.z[,c("AfterSize","Delta")], col=c("#7570b3","#e7298a"), xlab="Time of Day", border=NA) legend("topleft", c("Live Objects","Heap Recovered on GC"), fill=c("#7570b3","#e7298a")) box(which = "outer", lty = "solid") When I discuss the data in the log files with the customer, I will ask for an explaination for the large amount of referenced data resident in the Java heap. There are two are posibilities: There is a memory leak and the amount of space required to hold referenced objects will continue to grow, limited only by the maximum heap size. After the maximum heap size is reached, the JVM will throw an “Out of Memory” exception every time that the application tries to allocate a new object. If this is the case, the aplication needs to be debugged to identify why old objects are referenced when they are no longer needed. The application has a legitimate requirement to keep a large amount of data in memory. The customer may want to further increase the maximum heap size. Another possible solution would be to partition the application across multiple cluster nodes, where each node has responsibility for managing a unique subset of the data. Conclusion In conclusion, R is a very powerful tool for the analysis of Java garbage collection log files. The primary difficulty is data cleansing so that information can be read into an R data frame. Once the data has been read into R, a rich set of tools may be used for thorough evaluation.

  Read the article

• Handling WCF Service Paths in Silverlight 4 – Relative Path Support

  - by dwahlin

  If you’re building Silverlight applications that consume data then you’re probably making calls to Web Services. We’ve been successfully using WCF along with Silverlight for several client Line of Business (LOB) applications and passing a lot of data back and forth. Due to the pain involved with updating the ServiceReferences.ClientConfig file generated by a Silverlight service proxy (see Tim Heuer’s post on that subject to see different ways to deal with it) we’ve been using our own technique to figure out the service URL. Going that route makes it a peace of cake to switch between development, staging and production environments. To start, we have a ServiceProxyBase class that handles identifying the URL to use based on the XAP file’s location (this assumes that the service is in the same Web project that serves up the XAP file). The GetServiceUrlBase() method handles this work: public class ServiceProxyBase { public ServiceProxyBase() { if (!IsDesignTime) { ServiceUrlBase = GetServiceUrlBase(); } } public string ServiceUrlBase { get; set; } public static bool IsDesignTime { get { return (Application.Current == null) || (Application.Current.GetType() == typeof (Application)); } } public static string GetServiceUrlBase() { if (!IsDesignTime) { string url = Application.Current.Host.Source.OriginalString; return url.Substring(0, url.IndexOf("/ClientBin", StringComparison.InvariantCultureIgnoreCase)); } return null; } } Silverlight 4 now supports relative paths to services which greatly simplifies things.  We changed the code above to the following: public class ServiceProxyBase { private const string ServiceUrlPath = "../Services/JobPlanService.svc"; public ServiceProxyBase() { if (!IsDesignTime) { ServiceUrl = ServiceUrlPath; } } public string ServiceUrl { get; set; } public static bool IsDesignTime { get { return (Application.Current == null) || (Application.Current.GetType() == typeof (Application)); } } public static string GetServiceUrl() { if (!IsDesignTime) { return ServiceUrlPath; } return null; } } Our ServiceProxy class derives from ServiceProxyBase and handles creating the ABC’s (Address, Binding, Contract) needed for a WCF service call. Looking through the code (mainly the constructor) you’ll notice that the service URI is created by supplying the base path to the XAP file along with the relative path defined in ServiceProxyBase:   public class ServiceProxy : ServiceProxyBase, IServiceProxy { private const string CompletedEventargs = "CompletedEventArgs"; private const string Completed = "Completed"; private const string Async = "Async"; private readonly CustomBinding _Binding; private readonly EndpointAddress _EndPointAddress; private readonly Uri _ServiceUri; private readonly Type _ProxyType = typeof(JobPlanServiceClient); public ServiceProxy() { _ServiceUri = new Uri(Application.Current.Host.Source, ServiceUrl); var elements = new BindingElementCollection { new BinaryMessageEncodingBindingElement(), new HttpTransportBindingElement { MaxBufferSize = 2147483647, MaxReceivedMessageSize = 2147483647 } }; // order of entries in collection is significant: dumb _Binding = new CustomBinding(elements); _EndPointAddress = new EndpointAddress(_ServiceUri); } #region IServiceProxy Members /// <summary> /// Used to call a WCF service operation. /// </summary> /// <typeparam name="T">The type of EventArgs that will be returned by the service operation.</typeparam> /// <param name="callback">The method to call once the WCF call returns (the callback).</param> /// <param name="parameters">Any parameters that the service operation expects.</param> public void CallService<T>(EventHandler<T> callback, params object[] parameters) where T : EventArgs { try { var proxy = new JobPlanServiceClient(_Binding, _EndPointAddress); string action = typeof (T).Name.Replace(CompletedEventargs, String.Empty); _ProxyType.GetEvent(action + Completed).AddEventHandler(proxy, callback); _ProxyType.InvokeMember(action + Async, BindingFlags.InvokeMethod, null, proxy, parameters); } catch (Exception exp) { MessageBox.Show("Unable to use ServiceProxy.CallService to retrieve data: " + exp.Message); } } #endregion } The relative path support for calling services in Silverlight 4 definitely simplifies code and is yet another good reason to move from Silverlight 3 to Silverlight 4.   For more information about onsite, online and video training, mentoring and consulting solutions for .NET, SharePoint or Silverlight please visit http://www.thewahlingroup.com.

  Read the article

• Add a Hovering Image Toolbar to Firefox

  - by Asian Angel

  When you work with webpage images in Firefox you normally have to use the Context Menu to do anything with them. The Image Toolbar extension provides an extra toolbar to use when you hover your mouse over webpage images. Note: This extension will not function if you have the NoScript extension installed/enabled unless JavaScript has permission to be active on that page. Before You can see the available “Context Menu” options for working with images here. Not bad but it would be nice if some other convenient options were available as well. Image Toolbar in Action Once you have installed the extension you will be able to view the toolbar whenever you hover your mouse over an image. All of the commands are active by default but you can choose what is available in the options. The toolbar will also appear in the upper left region of the image but can be set to appear relative to the cursor. Note: The default minimum image size for the toolbar to appear over is “260 x 260 pixels” so you will probably want to change it to a much smaller size (see options below). Here is what is available in the Image Toolbar: Save – Choose between being prompted when saving or automatically saving to a specified location Copy – Copies image and image URL so that you can paste the image or URL depending on the app pasted into Print – Provides print preview and printing capabilities Info – Opens a window with “properties information” about the image Folder – Opens browser’s download folder in Windows Explorer The “Save, Copy, Print, & Folder Commands” are all pretty clear in what you can expect from them but what about the “Info Command”? This is what you will see if you use the “Info Command” and expand the window out all the way. Very nice… Options There are quite a few options available for what appears to be such a small toolbar. The first “Tab Area” lets you set up the “Save Scheme” that best suits your personal needs. You can choose which commands are available in the toolbar, decide if you would like text labels visible, and enable small icons if desired. As mentioned above the default image size for the toolbar to appear is “260 x 260 pixels”…we set ours for “10 x 10 pixels”. If you would like the toolbar to appear relative to your mouse cursor as opposed to the upper left corner of the image then you can select for that here. Conclusion If you have been wanting more options for working with webpage images in Firefox then this will make a very useful and convenient addition to your browser. Links Download the Image Toolbar extension (Mozilla Add-ons) Similar Articles Productive Geek Tips Conserve Space in Firefox by Combining ToolbarsShow Alexa Ranking in FirefoxLightweight Extension to Show PageRank in FirefoxSwitch Windows by Hovering the Mouse Over a Window in Windows 7 or VistaQuick Tip: Show PageRank in Firefox while Google Toolbar is Hidden TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Roadkill’s Scan Port scans for open ports Out of 100 Tweeters Out of band Security Update for Internet Explorer 7 Cool Looking Screensavers for Windows SyncToy syncs Files and Folders across Computers on a Network (or partitions on the same drive) If it were only this easy

  Read the article

• Travelling MVP #4: DevReach 2012

  - by DigiMortal

  Our next stop after Varna was Sofia where DevReach happens. DevReach is one of my favorite conferences in Europe because of sensible prices and strong speakers line-up. Also they have VIP-party after conference and this is good event to meet people you don’t see every day, have some discussion with speakers and find new friends. Our trip from Varna to Sofia took about 6.5 hours on bus. As I was tired from last evening it wasn’t problem for me as I slept half the trip. After smoking pause in Velike Tarnovo I watched movies from bus TV. We had supper later in city center Happy’s – place with good meat dishes and nice service. And next day it begun…. :) DevReach 2012 DevReach is held usually in Arena Mladost. It’s near airport and Telerik office. The event is organized by local MVP Martin Kulov together with Telerik. Two days of sessions with strong speakers is good reason enough for me to go to visit some event. Some topics covered by sessions: Windows 8 development web development SharePoint Windows Azure Windows Phone architecture Visual Studio Practically everybody can find some interesting session in every time slot. As the Arena is not huge it is very easy to go from one sessions to another if selected session for time slot is not what you expected. On the second floor of Arena there are many places where you can eat. There are simple chunk-food places like Burger King and also some restaurants. If you are hungry you will find something for your taste for sure. Also you can buy beer if it is too hot outside :) Weather was very good for October – practically Estonian summer – 25C and over. Sessions I visited Here is the list of sessions I visited at DevReach 2012: DevReach 2012 Opening & Welcome Messsage with Martin Kulov and Stephen Forte Principled N-Tier Solution Design with Steve Smith Data Patterns for the Cloud with Brian Randell .NET Garbage Collection Performance Tips with Sasha Goldshtein Building Secured, Scalable, Low-latency Web Applications with the Windows Azure Platform with Ido Flatow It’s a Knockout! MVVM Style Web Applications with Charles Nurse Web Application Architecture – Lessons Learned from Adobe Brackets with Brian Rinaldi Demystifying Visual Studio 2012 Performance Tools with Martin Kulov SPvNext – A Look At All the Exciting And New Features In SharePoint with Sahil Malik Portable Libraries – Why You Should Care with Lino Tadros I missed some sessions because of some death march projects that are going and that I have to coordinate but it was not big loss as I had time to walk around in session venue neighborhood and see Sofia Business Park. Next year again! I will be there again next year and hopefully more guys from Estonia will join me. I think it’s good idea to take short vacation for DevReach time and do things like we did this time – Bucharest, Varna, Sofia. It’s only good idea to plan some more free time so we are not very much in hurry and also we have no work stuff to do on the trip. This far this trip has been one of best trips I have organized and I will go and meet all those guys in this region again! :)

  Read the article

• To sample or not to sample...

  - by [email protected]

  Ideally, we would know the exact answer to every question. How many people support presidential candidate A vs. B? How many people suffer from H1N1 in a given state? Does this batch of manufactured widgets have any defective parts? Knowing exact answers is expensive in terms of time and money and, in most cases, is impractical if not impossible. Consider asking every person in a region for their candidate preference, testing every person with flu symptoms for H1N1 (assuming every person reported when they had flu symptoms), or destructively testing widgets to determine if they are "good" (leaving no product to sell). Knowing exact answers, fortunately, isn't necessary or even useful in many situations. Understanding the direction of a trend or statistically significant results may be sufficient to answer the underlying question: who is likely to win the election, have we likely reached a critical threshold for flu, or is this batch of widgets good enough to ship? Statistics help us to answer these questions with a certain degree of confidence. This focuses on how we collect data. In data mining, we focus on the use of data, that is data that has already been collected. In some cases, we may have all the data (all purchases made by all customers), in others the data may have been collected using sampling (voters, their demographics and candidate choice). Building data mining models on all of your data can be expensive in terms of time and hardware resources. Consider a company with 40 million customers. Do we need to mine all 40 million customers to get useful data mining models? The quality of models built on all data may be no better than models built on a relatively small sample. Determining how much is a reasonable amount of data involves experimentation. When starting the model building process on large datasets, it is often more efficient to begin with a small sample, perhaps 1000 - 10,000 cases (records) depending on the algorithm, source data, and hardware. This allows you to see quickly what issues might arise with choice of algorithm, algorithm settings, data quality, and need for further data preparation. Instead of waiting for a model on a large dataset to build only to find that the results don't meet expectations, once you are satisfied with the results on the initial sample, you can  take a larger sample to see if model quality improves, and to get a sense of how the algorithm scales to the particular dataset. If model accuracy or quality continues to improve, consider increasing the sample size. Sampling in data mining is also used to produce a held-aside or test dataset for assessing classification and regression model accuracy. Here, we reserve some of the build data (data that includes known target values) to be used for an honest estimate of model error using data the model has not seen before. This sampling transformation is often called a split because the build data is split into two randomly selected sets, often with 60% of the records being used for model building and 40% for testing. Sampling must be performed with care, as it can adversely affect model quality and usability. Even a truly random sample doesn't guarantee that all values are represented in a given attribute. This is particularly troublesome when the attribute with omitted values is the target. A predictive model that has not seen any examples for a particular target value can never predict that target value! For other attributes, values may consist of a single value (a constant attribute) or all unique values (an identifier attribute), each of which may be excluded during mining. Values from categorical predictor attributes that didn't appear in the training data are not used when testing or scoring datasets. In subsequent posts, we'll talk about three sampling techniques using Oracle Database: simple random sampling without replacement, stratified sampling, and simple random sampling with replacement.

  Read the article

• Friday Fun: Spell Blazer

  - by Asian Angel

  Are you ready for some fun and adventure after a long week back at work? This week’s game combines jewel-matching style game play with an RPG story for an awesome mix of fun and fiction. Your goal is to help a young wizard reach the magic academy in Raven as the forces of darkness are building. Spell Blazer The object of the game is to help young Kaven reach the Lightcaster Academy in Raven alive, but he will encounter many dangers along the way. Are you ready to begin the quest? As soon as you click Start Game the intro will automatically begin. If this is your first time playing the game the intro provides a nice background story for the game and what is happening in the game environment. Once you are past the intro, you will see a map of the region with your starting point in the Farmlands, various towns and the roads connecting them, along with your final destination of Raven. Notice that some of the roads are different colors…those colors indicate the “danger levels” for each part of your journey (green = good, yellow = some danger, etc.). To begin your journey click on the Town of Goose with your mouse. You will encounter your first monster part of the way towards Goose. This first round takes you through the game play process step-by-step. Once you have clicked Okay you will see the details about the monster you have just encountered. It is very important that you do not click on Fight! or Flee! until viewing and noting the types of spells that the monster is resistant to or has a weakness against. Choose your spells wisely based on the information provided about the monster. Keep in mind that the healing spell can be very useful depending on the monster you meet and your current health status. Note: Spells shown in order here are Healing, Fireball, Icebolt, & Lightning. Ready to fight! The first battle will also explain how to fight…click Okay to get started. Once the main window is in full view there are details that you need to look at. Beneath each of the combatants you will see the three attacks that each brings to the battle and at the bottom you will see their respective health points. We got lucky and had an Icebolt attack that we could utilize on the first play! Note: You can exchange two squares without making a match in order to try and line up an attack. While it happened too quickly to capture in our screenshot, there will be cool lightning bolt effects shoot out from matched up squares to the opposite combatant. You will also see the amount of damage inflicted from a particular attack on top of the avatars. Victory! Once you have won a round of combat a window will appear showing the amount of gold coins left behind by the monster. When you reach a town you will have the opportunity to stop over and rest or directly continue on with your journey. On to Halgard after a good rest! Play Spell Blazer Latest Features How-To Geek ETC How To Boot 10 Different Live CDs From 1 USB Flash Drive The 20 Best How-To Geek Linux Articles of 2010 The 50 Best How-To Geek Windows Articles of 2010 The 20 Best How-To Geek Explainer Topics for 2010 How to Disable Caps Lock Key in Windows 7 or Vista How to Use the Avira Rescue CD to Clean Your Infected PC The Deep – Awesome Use of Metal Objects as Deep Sea Creatures [Video] Convert or View Documents Online Easily with Zoho, No Account Required Build a Floor Scrubbing Robot out of Computer Fans and a Frisbee Serene Blue Windows Wallpaper for Your Desktop 2011 International Space Station Calendar Available for Download (Free) Ultimate Elimination – Lego Black Ops [Video]

  Read the article

• Anatomy of a serialization killer

  - by Brian Donahue

  As I had mentioned last month, I have been working on a project to create an easy-to-use managed debugger. It's still an internal tool that we use at Red Gate as part of product support to analyze application errors on customer's computers, and as such, should be easy to use and not require installation. Since the project has got rather large and important, I had decided to use SmartAssembly to protect all of my hard work. This was trivial for the most part, but the loading and saving of results was broken by SA after using the obfuscation, rendering the loading and saving of XML results basically useless, although the merging and error reporting was an absolute godsend and definitely worth the price of admission. (Well, I get my Red Gate licenses for free, but you know what I mean!)My initial reaction was to simply exclude the serializable results class and all of its' members from obfuscation, and that was just dandy, but a few weeks on I decided to look into exactly why serialization had broken and change the code to work with SA so I could write any new code to be compatible with SmartAssembly and save me some additional testing and changes to the SA project.In simple terms, SA does all that it can to prevent serialization problems, for instance, it will not obfuscate public members of a DLL and it will exclude any types with the Serializable attribute from obfuscation. This prevents public members and properties from being made private and having the name changed. If the serialization is done inside the executable, however, public members have the access changed to private and are renamed. That was my first problem, because my types were in the executable assembly and implemented ISerializable, but did not have the Serializable attribute set on them!public class RedFlagResults : ISerializable        {        }The second problem caused by the pruning feature. Although RedFlagResults had public members, they were not truly properties, and used the GetObjectData() method of ISerializable to serialize the members. For that reason, SA could not exclude these members from pruning and further broke the serialization. public class RedFlagResults : ISerializable        {                public List<RedFlag.Exception> Exceptions;                 #region ISerializable Members                 public void GetObjectData(SerializationInfo info, StreamingContext context)                {                                info.AddValue("Exceptions", Exceptions);                }                 #endregionSo to fix this, it was necessary to make Exceptions a proper property by implementing get and set on it. Also, I added the Serializable attribute so that I don't have to exclude the class from obfuscation in the SA project any more. The DoNotPrune attribute means I do not need to exclude the class from pruning.[Serializable, SmartAssembly.Attributes.DoNotPrune]        public class RedFlagResults        {                public List<RedFlag.Exception> Exceptions {get;set;}        }Similarly, the Exception class gets the Serializable and DoNotPrune attributes applied so all of its' properties are excluded from obfuscation.Now my project has some protection from prying eyes by scrambling up the code so it's harder to reverse-engineer, without breaking anything. SmartAssembly has also provided the benefit of merging so that the end-user doesn't need to extract all of the DLL files needed by RedFlag into a directory, and can be run directly from the .zip archive. When an error occurs (hey, I'm only human!), an exception report can be sent to me so I can see what went wrong without having to, er, debug the debugger.

  Read the article

• Oracle Announces Oracle Insurance Policy Administration for Life and Annuity 9.4

  - by helen.pitts(at)oracle.com

  Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} Today's global insurers require the ability to provide higher levels of service and quickly bring to market life insurance and annuity products that not only help them stand out from the competition, but also stay current with local legislation. To succeed, they require agile and flexible core systems that enable them to meet the unique localization requirements of the markets in which they operate, whether in North America, Asia Pacific or the Pan-European Region. The release of Oracle Insurance Policy Administration for Life and Annuity 9.4, announced today, helps insurers meet this need with expanded international market capabilities that enable them to reduce risk and profitably compete wherever their business takes them. It offers expanded multi-language along with unit-linked product and fund processing capabilities that enable regional and global insurers to rapidly configure and deliver localized products – along with providing better service for end users through a single policy admin solution. Key enhancements include: Kanji/Kana language support, pre-defined content, and imperial date processing for the Japanese market New localization flexibility for configuring and managing international mailing addresses along with regional variations for client information Enhanced capability to calculate unit-linked pricing and valuation, in addition to market-based processing and pre-configured unit linked content Expanded role-based security and masking capability to further protect sensitive customer data Enhanced capability to restrict processing specified activities based on time of day and user role, reducing exposure to market timing risks Further capability to eliminate duplicate client records, helping to reduce underwriting risks and enhance servicing through a single view of the client "The ability to leverage a single, rules-driven policy administration system for multiple global operation centers can help insurers realize significant improvements in speed to market, customer service, compliance with regional regulations, and consolidation efforts,” noted Celent's Craig Weber, senior vice president, Insurance. “We believe such initiatives are necessary to help the industry address service and distribution imperatives." Helping our customers meet these mission-critical business imperatives is a key objective for Oracle Insurance. Active, ongoing dialogue with our customers is an important part of the process to help understand how our solutions are and can continue to help them achieve success in the marketplace. I had the opportunity to meet with several of our insurance customers at the Oracle Insurance Policy Administration Client Advisory Board meeting last week in Philadelphia, Penn. (View photos on the Oracle Insurance Facebook page.)   It was a great forum for Oracle Insurance and our clients. Discussion centered on the latest business and IT trends, with opportunities to learn more about the latest release of Oracle Insurance Policy Administration for Life and Annuity and other Oracle Insurance solutions such as data warehousing / business intelligence, while exchanging best practices for product innovation and servicing customers and sales channels. Helen Pitts is senior product marketing manager for Oracle Insurance's life and annuities solutions.

  Read the article

• Doing your first mock with JustMock

  - by mehfuzh

  In this post, i will start with a  more traditional mocking example that  includes a fund transfer scenario between two different currency account using JustMock.Our target interface that we will be mocking looks similar to: public interface ICurrencyService {     float GetConversionRate(string fromCurrency, string toCurrency); } Moving forward the SUT or class that will be consuming the  service and will be invoked by user [provided that the ICurrencyService will be passed in a DI style] looks like: public class AccountService : IAccountService         {             private readonly ICurrencyService currencyService;               public AccountService(ICurrencyService currencyService)             {                 this.currencyService = currencyService;             }               #region IAccountService Members               public void TransferFunds(Account from, Account to, float amount)             {                 from.Withdraw(amount);                 float conversionRate = currencyService.GetConversionRate(from.Currency, to.Currency);                 float convertedAmount = amount * conversionRate;                 to.Deposit(convertedAmount);             }               #endregion         }   As, we can see there is a TransferFunds action implemented from IAccountService  takes in a source account from where it withdraws some money and a target account to where the transfer takes place using the provided conversion rate. Our first step is to create the mock. The syntax for creating your instance mocks is pretty much same and  is valid for all interfaces, non-sealed/sealed concrete instance classes. You can pass in additional stuffs like whether its an strict mock or not, by default all the mocks in JustMock are loose, you can use it as default valued objects or stubs as well. ICurrencyService currencyService = Mock.Create<ICurrencyService>(); Using JustMock, setting up your expectations and asserting them always goes with Mock.Arrang|Assert and this is pretty much same syntax no matter what type of mocking you are doing. Therefore,  in the above scenario we want to make sure that the conversion rate always returns 2.20F when converting from GBP to CAD. To do so we need to arrange in the following way: Mock.Arrange(() => currencyService.GetConversionRate("GBP", "CAD")).Returns(2.20f).MustBeCalled(); Here, I have additionally marked the mock call as must. That means it should be invoked anywhere in the code before we do Mock.Assert, we can also assert mocks directly though lamda expressions  but the more general Mock.Assert(mocked) will assert only the setups that are marked as "MustBeCalled()”. Now, coming back to the main topic , as we setup the mock, now its time to act on it. Therefore, first we create our account service class and create our from and to accounts respectively. var accountService = new AccountService(currencyService);   var canadianAccount = new Account(0, "CAD"); var britishAccount = new Account(0, "GBP"); Next, we add some money to the GBP  account: britishAccount.Deposit(100); Finally, we do our transfer by the following: accountService.TransferFunds(britishAccount, canadianAccount, 100); Once, everything is completed, we need to make sure that things were as it is we have expected, so its time for assertions.Here, we first do the general assertions: Assert.Equal(0, britishAccount.Balance); Assert.Equal(220, canadianAccount.Balance); Following, we do our mock assertion,  as have marked the call as “MustBeCalled” it will make sure that our mock is actually invoked. Moreover, we can add filters like how many times our expected mock call has occurred that will be covered in coming posts. Mock.Assert(currencyService); So far, that actually concludes our  first  mock with JustMock and do stay tuned for more. Enjoy!!

  Read the article

• Silverlight Cream for March 10, 2011 -- #1058

  - by Dave Campbell

  In this Issue: Ian T. Lackey, Peter Kuhn, WindowsPhoneGeek(-2-), Jesse Liberty(-2-), Martin Krüger, John Papa, Jeremy Likness, Karl Shifflett, and Colin Eberhardt. Above the Fold: Silverlight: "Silverlight TV 65: 3D Graphics" John Papa WP7: "Developing a Windows Phone 7 Jump List Control" Colin Eberhardt Shoutouts: Telerik announced a special sale on their RadControls for WP7... check it out: RadControls for Windows Phone 7 - on Sale from March 16th at a Special Promo Price! From SilverlightCream.com: Prism BootStrapper Load ModuleCatalog Ansyc Ian T. Lackey has a post up about reading the module catalog for Prism from an XML file asynchronously... fun stuff... this is how we kick-started our app... XNA for Silverlight developers: Part 6 - Input (accelerometer) Peter Kuhn has Part 6 of his XNA for Silverlight devs up at SilverlightShow. This post is on the use of the accelerometer... some great diagrams and explanations of it's use along with some code to play with... including a 'problems and pitfalls' section, and some good external links. Getting Started with Unit Testing in Silverlight for WP7 WindowsPhoneGeek has an introduction to Unit Testing in general, and then moves into Unit Testing in Silverlight for WP7, providing 3 options with links to the materials and code demonstrating the concepts. Using DockPanel in WP7 Responding to reader's questions, WindowsPhoneGeek's next post is on the DockPanel from the Silverlight Toolkit, and using it in WP7... defined declaratively and in code. Reactive Extensions–More About Chaining Jesse Liberty has post number 10 on Rx up and is a follow-on to the last one on Chaining. This time he exercises the chaining aspect of SelectMany. Yet Another Podcast #26–Walt Ritscher In his next post, Jesse Liberty has his 26th 'Yet Another Podcast' up and is chatting with my friend Walt Ritscher. If you don't know who Walt is, check out the links Jesse has on the post... I'm sure you've crossed paths. How to: Create A half square from a regular polygon (triangle) Martin Krüger demonstrates the exact placement of a half-square (isosceles right triangle), formed with a regular polygon in Blend... this is much more involved than I've made it sound... check out his post. Silverlight TV 65: 3D Graphics John Papa has Silverlight TV number 65 up and it's all about the 3D graphics stuff we saw at the Firestarter. John is talking with Danny Riddel, the CEO of Archetype, the company that built the awesome 3D demo we all gushed over. Jounce Part 12: Providing History-Based Back Navigation Jeremy Likness has part 12 of his Jounce exploration up... and discussing the stack of navigated pages that Jounce retains and providing a 'go back' functionality... and provides a good example of using it all. Prism 4 Region Navigation with Silverlight Frame Navigation and Unity Karl Shifflett has a post for all us Prism afficianados... Prism, Unity, and the Silverlight Frame Navigation framework. Some great external links for 'required reading' too. Developing a Windows Phone 7 Jump List Control Colin Eberhardt has an awesome tutorial up for creating a JumpList control for WP7... what a bunch of effort... this is a step-by-step description of designing the control he built and blogged about a while back... and it's still cool! Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• BizTalk 2009 - Pipeline Component Wizard

  - by Stuart Brierley

  Recently I decided to try out the BizTalk Server Pipeline Component Wizard when creating a new pipeline component for BizTalk 2009. There are different versions of the wizard available, so be sure to download the appropriate version for the BizTalk environment that you are working with. Following the download and expansion of the zip file, you should be left with a Visual Studio solution.  Open this solution and build the project. Following this installation is straight foward - locate and run the built setup.exe file in the PipelineComponentWizard Setup project and click through the small number of installation screens. Once you have completed installation you will be ready to use the wizard in Visual Studio to create your BizTalk Pipeline Component. Start by creating a new project, selecting BizTalk Projects then BizTalk Server Pipeline Component.  You will then be presented with the splash screen. The next step is General Setup, where you will detail the classname, namespace, pipeline and component types, and the implementation language for your Pipeline Component. The options for pipeline type are Receive, Send or Any. Depending on the pipeline type chosen there are different options presented for the component type, matching those available within the BizTalk Pipelines themselves: Receive - Decoder, Disassembling Parser, Validate, Party Resolver, Any. Send -  Encoder, Assembling Serializer, Any. Any - Any. The options for implementation language are C# or VB.Net Next you must set up the UI settings - these are the settings that affect the appearance of the pipeline component within Visual Studio. You must detail the component name, version, description and icon.  Next is the definition of the variables that the pipeline component will use.  The values for these variables will be defined in Visual Studio when creating a pipeline. The options for each variable you require are: Designer Property - The name of the variable. Data Type - String, Boolean, Integer, Long, Short, Schema List, Schema With None Clicking finish now will complete the wizard stage of the creation of your pipeline component. Once the wizard has completed you will be left with a BizTalk Server Pipeline Component project containing a skeleton code file for you to complete.   Within this code file you will mainly be interested in the execute method, which is left mostly empty ready for you to implement your custom pipeline code:          #region IComponent members         /// <summary>         /// Implements IComponent.Execute method.         /// </summary>         /// <param name="pc">Pipeline context</param>         /// <param name="inmsg">Input message</param>         /// <returns>Original input message</returns>         /// <remarks>         /// IComponent.Execute method is used to initiate         /// the processing of the message in this pipeline component.         /// </remarks>         public Microsoft.BizTalk.Message.Interop.IBaseMessage Execute(Microsoft.BizTalk.Component.Interop.IPipelineContext pc, Microsoft.BizTalk.Message.Interop.IBaseMessage inmsg)         {             //             // TODO: implement component logic             //             // this way, it's a passthrough pipeline component             return inmsg;         }         #endregion Once you have implemented your custom code, build and compile your Custom Pipeline Component then add the compiled .dll to C:\Program Files\Microsoft BizTalk Server 2009\Pipeline Components . When creating a new pipeline, in Visual Studio reset the toolbox and the custom pipeline component should appear ready for you to use in your Biztalk Pipeline. Drop the pipeline component into the relevant pipeline stage and configure the component properties (the variables defined in the wizard). You can now deploy and use the pipeline as you would any other custom pipeline.

  Read the article

• Acr.ExtDirect &ndash; Part 1 &ndash; Method Resolvers

  - by Allan Ritchie

  One of the most important things of any open source libraries in my opinion is to be as open as possible while avoiding having your library become invasive to your code/business model design.  I personally could never stand marking my business and/or data access code with attributes everywhere.  XML also isn’t really a fav with too many people these days since it comes with a startup performance hit and requires runtime compiling.  I find that there is a whole ton of communication libraries out there currently requiring this (ie. WCF, RIA, etc).  Even though Acr.ExtDirect comes with its own set of attributes, you can piggy-back the [ServiceContract] & [OperationContract] attributes from WCF if you choose.  It goes beyond that though, there are 2 others “out-of-the-box” implementations – Convention based & XML Configuration.    Convention – I don’t actually recommend using this one since it opens up all of your public instance methods to remote execution calls. XML Configuration – This isn’t so bad but requires you enter all of your methods and there operation types into the Castle XML configuration & as I said earlier, XML isn’t the fav these days.   So what are your options if you don’t like attributes, convention, or XML Configuration?  Well, Acr.ExtDirect has its own extension base to give the API a list of methods and components to make available for remote execution.  1: public interface IDirectMethodResolver { 2:   3: bool IsServiceType(ComponentModel model, Type type); 4: string GetNamespace(ComponentModel model); 5: string[] GetDirectMethodNames(ComponentModel model); 6: DirectMethodType GetMethodType(ComponentModel model, MethodInfo method); 7: }   Now to implement our own method resolver:   1: public class TestResolver : IDirectMethodResolver { 2:   3: #region IDirectMethodResolver Members 4:   5: /// <summary> 6: /// Determine if you are calling a service 7: /// </summary> 8: /// <param name="model"></param> 9: /// <param name="type"></param> 10: /// <returns></returns> 11: public bool IsServiceType(ComponentModel model, Type type) { 12: return (type.Namespace == "MyBLL.Data"); 13: } 14:   15: /// <summary> 16: /// Return the calling name for the client side 17: /// </summary> 18: /// <param name="model"></param> 19: /// <returns></returns> 20: public string GetNamespace(ComponentModel model) { 21: return model.Name; 22: } 23:   24: public string[] GetDirectMethodNames(ComponentModel model) { 25: switch (model.Name) { 26: case "Products" : 27: return new [] { 28: "GetProducts", 29: "LoadProduct", 30: "Save", 31: "Update" 32: }; 33:   34: case "Categories" : 35: return new [] { 36: "GetProducts" 37: }; 38:   39: default : 40: throw new ArgumentException("Invalid type"); 41: } 42: } 43:   44: public DirectMethodType GetMethodType(ComponentModel model, MethodInfo method) { 45: if (method.Name.StartsWith("Save") || method.Name.StartsWith("Update")) 46: return DirectMethodType.FormSubmit; 47: 48: else if (method.Name.StartsWith("Load")) 49: return DirectMethodType.FormLoad; 50:   51: else 52: return DirectMethodType.Direct; 53: } 54:   55: #endregion 56: }   And there you have it, your own custom method resolver.  Pretty easy and pretty open ended!

  Read the article

• JD Edwards Apps in a Box - Update

  - by Hartmut Wiese

  Summary and clarification JD Edwards Apps in a box is a Partner offering to the customer. We as Oracle have a huge interest in getting a successful offering to the market and we help the Partner building their offering. We provide components like JD Edwards EnterpriseOne and the Hardware. The Business Partner adds the installation services and position this as a solution to the market for a single price. As you know JD Edwards EnterpriseOne can run on multiple hardware platforms. Linux/X-86 version As you all know we do have JD Edwards VM Templates available from Oracle for the X-86 architecture. Each Partner should or is already able to install JD Edwards EnterpriseOne using these images from our software delivery cloud. We built a master bill of material for a X3-2 Hardware configuration now. It has been uploaded on the Community Workspace now. This is a SUGGESTION and limited to 50 Users MAX. However I strongly recommend you to do a sizing as usual and verify the configuration for each opportunity individually. T4-1/X3-2 version Oracle is not providing similar images for the T4-1 SPARC / SOLARIS architecture. There is an Optimized Solution Team inside Oracle who has created an Optimized Solution for JD Edwards some time ago. They created a whitepaper which is still available to download. This whitepaper was used as a starting point however we decided to build a new version of it using the latest Software and Hardware available. This has now been finalized and we are happy to provide this to our partners. This image is more a service we provide for each partner which they can reuse and extend based on their individual offerings. It is not an official supported Oracle Product and cannot be used to deploy to customers immediately. You cannot resell “JDE in a box”. You can use these images to save time while building your own Go-to-Market offering. You might want to add functionality like Mobility. It is also not complete as also the Deployment Server needs to be configured individually at the customer site. We will create some documentation about: what this images contains (and what not)? what final installation activities needs to be provided by each VAD/Partner in this process?  I will send an email to the community once we are ready to share it. You find these assets than in the Community Workspace. The Business Model with Oracle Hardware For those who have not done any Hardware business with Oracle yet: Usually a HW reseller orders the hardware through a Value Add Distributors (VAD) and not from Oracle directly. Each Partner needs to have Hardware Resell rights to do so. The VAD is assembling the boxes according to the needs of each customer. It is easily possible for them to prepare the boxes with the images we/you provide. However the final configuration is something a reseller/implementer needs to do at the customer site. This process is not the same in the EMEA region. Sometimes a VAD are taking the order but they do not see the Hardware at all. In those cases a VAD cannot provide any help with the pre-loading of any images and the reseller/implementer needs to do that. In some countries we do not have VADs at all.

  Read the article

• Will You Accept This Rose?

  - by user715249

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} Ashley, Bentley and the Masked Man. If these names mean anything to you we know where you’ll be on Monday night – planted in front of your television awaiting the villain’s return and what is sure to be the most dramatic rose ceremony yet on the Bachelorette.  If you’re the Oracle PartnerNetwork Communications Team you’ll be spending your Monday night putting the final touches on the most exciting Partner Kickoff Event yet.  Listen in as Judson tells you more. Starting at 6:00 AM PT on Tuesday, June 29th partners – and potential partners – can tune in to watch the excitement unfold at partner.oracle.com.  The storyline for FY12 will continue to unfold with a special role being outlined for our ISV partners.  SPOILER ALERT: OPN has made an investment in how we’ll go to market together – trust us - you don’t want to get this news from the highlight reel. While we won’t be sending anyone home from the show, we do promise an exciting hour which will gear you up to go to market with Oracle in the new fiscal year.  The Oracle PartnerNetwork FY12 Kickoff is being held live 5 times and will include a ‘date card’ message for each region. EMEA Kickoff - Tuesday, June 29, at 6 a.m. PT / 2 p.m. BT LAD Kickoff – Tuesday, June 29, at 8 a.m. PT / noon DT North America Kickoff – Tuesday, June 29, at 10 a.m. PT / 1 p.m. ET Japan Kickoff – Tuesday, June 29, at 6 p.m. PT / Wednesday, June 30, at 10 a.m. JT (Tokyo) APAC Kickoff– Tuesday, June 29, at 8 p.m. PT / Wednesday, June 30, at 11 a.m. SGT (Singapore) / 1 p.m. AET (Sydney) We’ll be taking your questions live throughout the show – we hope you’ll “accept our rose” and join us on this amazing journey. The OPN Communications Team

  Read the article

• Internships at Oracle &ndash; a truly multicultural experience!

  - by cristian.condurache(at)oracle.com

  Hello everybody!!! Our names are Lena and Laura, we both study in the same Grande Ecole in France, IPAG and we are about to complete our 16 week-internship in Oracle in the UK. Below a summary of our experience! My name is Lena. I am 20 years old and joined Oracle UK in September 2010 – more specifically, I joined the EMEA Graduate's Recruitment Team (EMEA stands for Europe, Middle East and Africa), and I have learned a lot about working life. It was a really good experience, which made me realize that I soon will be looking for a fulltime employee in a company in less than 3 years. I am glad to have had this first experience in Oracle. First of all because it's a very welcoming company which treats interns as employees and gives them the opportunity to show their potential. I also discovered that it is nice to work in a company where everybody knows everybody, and where the atmosphere is really good. The multicultural aspect is one of the most important and beautiful elements of Oracle. It gives you the opportunity to have contacts in many parts of the world and discover a lot of nice people. During my internship I learned a lot about Recruitment. I discovered I want to work in a Human Resources role after I graduate. I like the contact I will have with candidates and the fact that I have to be in touch with managers and understand their needs. I would be glad to work for the company in the near future. I would like to thank all my team members for welcoming me like they did. It was a real pleasure to share this experience in Oracle and in this team and I hope to return after I graduate.   Hi all! I am Laura. My wish for this internship was to focus on training of personal skills for employees and, by the same time of course, for the company’s development.... and I did it in the OTD team (EMEA Organization Talent Development Team). I could not have done something better than this! It was truly instructive. I learnt how to work in such a big international company, the values and the rules to follow and to interact and be part of the organisation. In Oracle, there are so different aspects of every department, so many possibilities in HR as well as in Finance or Sales... The jobs are very various and the employees’ cultures are also really different thanks to this international and multicultural company. I am working with OTD for the entire EMEA region, having many of my colleagues in other countries, with other cultures, other ways to work, and other ways to think... this is so inspiring! Oracle offers the best environment to learn about a job, as well as to learn about work life in such large companies. This company is about new technologies, it always goes fast, and everything changes quickly! You have to be aware of these changes and keep track of the wishes of customers. For OTD of course, these customers are the employees. Looking back I have learnt more then I would have ever thought and I know that it is what I want to do... And now I hope to come back again! I want to thank all my team for welcoming me and integrating me with such happiness. I will truly miss them!! If you have any questions related to this article feel free to contact [email protected]. You can find our job opportunities via http://campus.oracle.com. Technorati Tags: Oracle,EMEA,Recruitment,internship,ODT,team

  Read the article

• SEO non-English domain name advice

  - by Dominykas Mostauskis

  I'm starting a website, that is meant for a non-English region, using an alphabet that is a bit different than that of English. Current plan is as follows. The website name, and the domain name, will be in the local language (not English); however, domain name will be spelled in the English alphabet, while the website's title will be the same word(s), but spelled properly with accents. E.g.: 'www.litterat.fr' and 'Littérat'. Does the difference between domain name and website name character use influence the site's SEO? Is it better, SEO-wise, to choose a name that can be spelled the same way in the English alphabet? From my experience, when searching online, invariably, the English alphabet is used, no matter the language, so people will still be searching 'litterat' (without accents and such). Edit: To sum up: Things have been said about IDN (Internationalized domain name). To make it simple, they are second-level domain names that contain language specific characters (LSP)(e.g. www.café.fr). Here you can check what top-level domains support what LSPs. Check initall's answer for more info on using LSPs in paths and queries. To answer my question about how and if search engines relate keywords spelled with and without language specific characters: Google can potentially tell that series and séries is the same keyword. However, (most relevant for words that are spelled differently across languages and have different meanings, like séries), for Google to make the connection (or lack thereof) between e and é, it has to deduce two things: Language that you are searching in. Language of your query. You can specify it manually through Advanced search or it guesses it, sometimes. I presume it can guess it wrong too. The more keywords specific to this language you use the higher Google's chance to guess the language. Language of the crawled document, against which the ASCII version of the word will be compared (in this example – series). Again, check initall's answer for how to help Google in understanding what language your document is in. Once it has that it can tell whether or not these two spellings should be treated as the same keyword. Google has to understand that even though you're not using french (in this example) specific characters, you're searching in French. The reason why I used the french word séries in this example, is that it demonstrates this very well. You have it in French and you have it in English without the accent. So if your search query is ambiguous like our series, unless Google has something more to go on, it will presume that there's no correlation between your search and séries in French documents. If you augment your query to series romantiques (try it), Google will understand that you're searching in French and among your results you'll see séries as well. But this does not always work, you should test it out with your keywords first. For example, if you search series francaises, it will associate francaises with françaises, but it will not associate series with séries. It depends on the words. Note: worth stressing that this problem is very relevant to words that, written in plain ASCII, might have some other meanings in other languages, it is less relevant to words that can be, by a distinct margin, just some one language. Tip: I've noticed that sometimes even if my non-accented search query doesn't get associated with the properly spelled word in a document (especially if it's the title or an important keyword in the doc), it still comes up. I followed the link, did a Ctrl-F search for my non-accented search query and found nothing, then checked the meta-tags in the source and you had the page's title in both accented and non-accented forms. So if you have meta-tags that can be spelled with language specific characters and without, put in both. Footnote: I hope this helps. If you have anything to add or correct, go ahead.

  Read the article

• Take a chance !

  - by Hartmut Wiese

  Hi everybody, Later today I am going to reach out to the JDE Partner in EMEA I am already in contact with and ask for participation and collaboration within the new EMEA JDE Partner Community. I am very excited about this community and I really believe we will have much more success in the future selling and implementing JDEdwards in this large region. For those who don´t know me yet ... I am really a long time in the JDEdwards business. I have been a JDE PreSales Consultant and joined JDEdwards in 1998 in Germany. After JDEdwards/PeopleSoft was aquired by Oracle I changed my role and become responsible on an EMEA level for the Oracle Accelerate and the Oracle Business Accelerator program. A lot of you are already know me ... and hopefully believe and trust me as well. Within the last five months I talked to approx. 60 partners already face-to-face during the various events I attended. We had two PreSales Universities delievered already and I have been to one JDE Exsite event, a JDE Executive Forum, two User groups events and one JDE Partner Event. Again approximately 60+ partner discussions and everybody likes the idea of the community and how I am going to run this in the future. At the JDEdwards UK User Group event (NOV 13) there was an external speaker talking about risk. It was a very good speech. One key element of his speech was that a sequence of (small) failures might lead to a big success. He gave very good examples from the history not software related at all but as a results some of the well done individuals everybody knows today started very small and they failed several times before they become successful. But these persons did not gave up and in the long run they win and succeeded. I really spent some time reflecting this to our business as of today. My intention to write these lines is to convince each partner out there to think about investing in JDEdwards TODAY. There are currently a number of potential investment ideas on the table for you. We have a very strong and powerful ERP System. We have advantages against all our competitors. Each partner has the ability to create his own SaaS model and deliver individual services to the customers. We also have three Business Accelerators available which really speeds up the implementation by still having full flexibility to change for example any processing option if needed. A huge number of customers are on old releases globally and think about upgrading. New technology makes new business processes available (e.g. iPad). Oracle is a pretty much forward looking company and we build tools and products. In the area of JDEdwards our partners are combining the Oracle tools and products and bringing the value to the customers. At one point in time you have decided to run your business on your own and to become a JDE/PSFT/ORCL partner. This was a risk of course at that point of time. You did not fail and this is very good of course. Business has changed and Oracle has the product and tools for you to become even more successful in the future but it is a very good time for you to take a risk again. I am not able to promise you anything but the situation is very good. You might not win every deal or increase your margin immediately but I truly believe you will find new ways of doing your business in the future by adopting some of our ideas. The only person who can stop you ... is you. Please try something new/different. Success sometimes needs some time and initial failures but if you never failed - you have never lived. To get support during this phase please share your doubts, thoughts, experiences inside the new JDEdwards community and learn from others who went to similar processes. Please join here. Take care and best regards Hartmut Wiese

  Read the article

• Nec USB 3.0 controller drops connection - Ubuntu 12.04.1

  - by Tom

  I have some serious problems with Technaxx pci-e 302p card. It has uPD720200a NEC chip with 4020 firmware. BIOS recognises it. Sometimes it recognises devices and system mounts them and are functional for few minutes, other times they can't be mount and error occours. After fresh install card worked fine, but after kernel and firmware update it behaves as mentioned. Outputs: uname -a Linux asd-GA-MA770-UD3 3.2.0-30-generic #48-Ubuntu SMP Fri Aug 24 16:52:48 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux lspci -vvv USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04) (prog-if 30 [XHCI]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at fd8fe000 (64-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: xhci_hcd lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 009 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 07d1:3c0a D-Link System DWA-140 RangeBooster N Adapter(rev.B2) [Ralink RT3072] Bus 005 Device 004: ID 1997:1221 Bus 005 Device 003: ID 15c2:003c SoundGraph Inc. lsmod Module Size Used by nls_iso8859_1 12713 0 nls_cp437 16991 0 vfat 17585 0 fat 61512 1 vfat vesafb 13844 1 saa7134_alsa 18602 1 rfcomm 47604 0 bnep 18281 2 bluetooth 180104 10 rfcomm,bnep tda827x 18182 1 snd_hda_codec_hdmi 32474 1 ir_lirc_codec 12859 0 lirc_dev 19204 1 ir_lirc_codec tda8290 22616 1 arc4 12529 2 snd_hda_codec_realtek 224173 1 ir_mce_kbd_decoder 12777 0 ir_sony_decoder 12510 0 ir_jvc_decoder 12507 0 tuner 27428 1 ir_rc6_decoder 12507 0 snd_hda_intel 33773 5 rt2800usb 22684 0 rt2800lib 58925 1 rt2800usb crc_ccitt 12667 1 rt2800lib rt2x00usb 20762 1 rt2800usb rt2x00lib 51144 3 rt2800usb,rt2800lib,rt2x00usb mac80211 506816 3 rt2800lib,rt2x00usb,rt2x00lib ir_rc5_decoder 12507 0 rc_avermedia_m135a 12526 0 rc_imon_pad 12505 0 ir_nec_decoder 12507 0 cfg80211 205544 2 rt2x00lib,mac80211 snd_hda_codec 127706 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel snd_ctxfi 111202 2 snd_hwdep 13668 1 snd_hda_codec imon 32839 0 snd_pcm 97188 5 saa7134_alsa,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_ctxfi snd_seq_midi 13324 0 saa7134 181851 1 saa7134_alsa videobuf_dma_sg 19354 2 saa7134_alsa,saa7134 snd_rawmidi 30748 1 snd_seq_midi snd_seq_midi_event 14899 1 snd_seq_midi joydev 17693 0 rc_core 26412 13 ir_lirc_codec,ir_mce_kbd_decoder,ir_sony_decoder,ir_jvc_decoder,ir_rc6_decoder,ir_rc5_decoder,rc_avermedia_m135a,rc_imon_pad,ir_nec_decoder,imon,saa7134 snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event fglrx 3263886 101 videobuf_core 26390 2 saa7134,videobuf_dma_sg v4l2_common 16454 2 tuner,saa7134 videodev 98259 3 tuner,saa7134,v4l2_common sp5100_tco 13791 0 snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq snd 78855 28 saa7134_alsa,snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_ctxfi,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device v4l2_compat_ioctl32 17128 1 videodev tveeprom 21249 1 saa7134 i2c_piix4 13301 0 soundcore 15091 1 snd edac_core 53746 0 serio_raw 13211 0 snd_page_alloc 18529 3 snd_hda_intel,snd_ctxfi,snd_pcm edac_mce_amd 23709 0 wmi 19256 0 mac_hid 13253 0 ppdev 17113 0 parport_pc 32866 1 k10temp 13166 0 lp 17799 0 parport 46562 3 ppdev,parport_pc,lp usb_storage 49198 0 uas 18180 0 usbhid 47199 0 hid 99559 1 usbhid firewire_ohci 41000 0 firewire_core 63558 1 firewire_ohci crc_itu_t 12707 1 firewire_core floppy 70365 0 pata_atiixp 13204 2 r8169 62099 0 dmesg | tail after plugging to usb 3.0 port [ 834.871296] sd 9:0:0:0: rejecting I/O to offline device [ 834.871308] sd 9:0:0:0: rejecting I/O to offline device [ 834.871319] sd 9:0:0:0: rejecting I/O to offline device [ 834.871330] sd 9:0:0:0: rejecting I/O to offline device [ 834.871530] sd 9:0:0:0: [sdd] Unhandled error code [ 834.871536] sd 9:0:0:0: [sdd] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 834.871545] sd 9:0:0:0: [sdd] CDB: Read(10): 28 00 0e 8e 48 0a 00 00 3e 00 [ 834.871564] end_request: I/O error, dev sdd, sector 244205578 [ 834.875497] sd 8:0:0:1: Device offlined - not ready after error recovery [ 834.885339] usb 9-2: USB disconnect, device number 2 Are there any other outputs need for answering? I'll post them ASAP. I could of course reject updating the system but I think it's halfway solution. Any help appreciated. BTW USB 2.0 and 1.1 ports run well, card itself runs under win7 as charm. Tom

  Read the article

• Sneak Peak: Social Developer Program at JavaOne

  - by Mike Stiles

  By guest blogger Roland Smart We're just days away from what is gunning to be the most exciting installment of OpenWorld to date, so how about an exciting sneak peak at the very first Social Developer Program? If your first thought is, "What's a social developer?" you're not alone. It’s an emerging term and one we think will gain prominence as social experiences become more prevalent in enterprise applications. For those who keep an eye on the ever-evolving Facebook platform, you'll recall that they recently rebranded their PDC (preferred developer consultant) group as the PMD (preferred marketing developer), signaling the importance of development resources inside the marketing organization to unlock the potential of social. The marketing developer they're referring to could be considered a social developer in a broader context. While it's true social has really blossomed in the marketing context and CMOs are winning more and more technical resources, social is starting to work its way more deeply into the enterprise with the help of developers that work outside marketing. Developers, like the rest of us, have fallen in "like" with social functionality and are starting to imagine how social can transform enterprise applications in the way it has consumer-facing experiences. The thesis of my presentation is that social developers will take many pages from the marketing playbook as they apply social inside the enterprise. To support this argument, lets walk through a range of enterprise applications and explore how consumer-facing social experiences might be interpreted in this context. Here's one example of how a social experience could be integrated into a sales enablement application. As a marketer, I spend a great deal of time collaborating with my sales colleagues, so I have good insight into their working process. While at Involver, we grew our sales team quickly, and it became evident some of our processes broke with scale. For example, we used to have weekly team meetings at which we'd discuss what was working and what wasn't from a messaging perspective. One aspect of these sessions focused on "objections" and "responses," where the salespeople would walk through common objections to purchasing and share appropriate responses. We tried to map each context to best answers and we'd capture these on a wiki page. As our team grew, however, participation at scale just wasn't tenable, and our wiki pages quickly lost their freshness. Imagine giving salespeople a place where they could submit common objections and responses for their colleagues to see, sort, comment on, and vote on. What you'd get is an up-to-date and relevant repository of information. And, if you supported an application like this with a social graph, it would be possible to make good recommendations to individual sales people about the objections they'd likely hear based on vertical, product, region or other graph data. Taking it even further, you could build in a badging/game element to reward those salespeople who participate the most. Both these examples are based on proven models at work inside consumer-facing applications. If you want to learn about how HR, Operations, Product Development and Customer Support can leverage social experiences, you’re welcome to join us at JavaOne or join our Social Developer Community to find some of the presentations after OpenWorld.

  Read the article

< Previous Page | 46 47 48 49 50 51 52 53 54 55 56 57  | Next Page >