Search Results

Search found 20659 results on 827 pages for 'var'.

Page 50/827 | < Previous Page | 46 47 48 49 50 51 52 53 54 55 56 57  | Next Page >

  • Jailkit not locking down SFTP, working for SSH

    - by doublesharp
    I installed jailkit on my CentOS 5.8 server, and configured it according to the online guides that I found. These are the commands that were executed as root: mkdir /var/jail jk_init -j /var/jail extshellplusnet jk_init -j /var/jail sftp adduser testuser; passwd testuser jk_jailuser -j /var/jail testuser I then edited /var/jail/etc/passwd to change the login shell for testuser to be /bin/bash to give them access to a full bash shell via SSH. Next I edited /var/jail/etc/jailkit/jk_lsh.ini to look like the following (not sure if this is correct) [testuser] paths= /usr/bin, /usr/lib/ executables= /usr/bin/scp, /usr/lib/openssh/sftp-server, /usr/bin/sftp The testuser is able to connect via SSH and is limited to only view the chroot jail directory, and is also able to log in via SFTP, however the entire file system is visible and can be traversed. SSH Output: > ssh testuser@server Password: Last login: Sat Oct 20 03:26:19 2012 from x.x.x.x bash-3.2$ pwd /home/testuser SFTP Output: > sftp testuser@server Password: Connected to server. sftp> pwd Remote working directory: /var/jail/home/testuser What can be done to lock down SFTP access to the jail? FWIW, I mostly used this as a guide: http://digitalpatch.blogspot.com.ar/2010/03/openssh-daemon-hardening-part-3-setup.html

    Read the article

  • wanted to extend jQuery to handle a custom enter key event based on tabindex

    - by ullasvk
    I write the following code to handle when the enter key pressed an with few validation like if it is a textarea allow only four lines and if the value is empty, focus on itself. var temp = 1; function getLines(id) { return temp=temp+id; } $("#theform").keypress(function(e){ var key = e.charCode ? e.charCode : e.keyCode ? e.keyCode : 0; if (key == 13) { var $targ = $(e.target); var tindex = $targ.attr("tabindex"); var count =1; var focusNext = false; var allowedNumberOfLines = 4; if ($targ.is("textarea") && !$targ.is(":button,:submit")) { var lines= getLines(count); if (lines > allowedNumberOfLines) { $("#login_error").css('background', '#F7F77C').fadeIn(1000).html("Only "+allowedNumberOfLines+" Lines Allowed").fadeOut(1000); tindex++; $("[tabindex=" + tindex + "]").focus(); return false; } } else if($targ.val() =='' || $targ.val() == "undefined") { $("[tabindex=" + tindex + "]").focus(); return false; } else if($targ.val() !='' || $targ.val() != "undefined") { tindex++; $("[tabindex=" + tindex + "]").focus(); return false; } } }); Is there any way to make it a custom function so that i can just call the function like $('theform').returnPress();

    Read the article

  • Can't unwrap Optional.None tableviewcell

    - by Mathew Padley
    I've a table view that has a custom table view cell in it. My problem is that when i try and assign a value to a variable in the custom table view cell I get the stated error. Now, I think its because the said variable is not initialised, but its got me completely stumped. This is the custom table cell: import Foundation import UIKit class LocationGeographyTableViewCell: UITableViewCell { //@IBOutlet var Map : MKMapView; @IBOutlet var AddressLine1 : UILabel; @IBOutlet var AddressLine2 : UILabel; @IBOutlet var County : UILabel; @IBOutlet var Postcode : UILabel; @IBOutlet var Telephone : UILabel; var location = VisitedLocation(); func Build(location:VisitedLocation) -> Void { self.location = location; AddressLine1.text = "test"; } } My cell for row at index path is: override func tableView(tableView: UITableView!, cellForRowAtIndexPath indexPath: NSIndexPath!) -> UITableViewCell! { var addressCell = tableView.dequeueReusableCellWithIdentifier("ContactDetail") as? LocationGeographyTableViewCell; if !addressCell { addressCell = LocationGeographyTableViewCell(style: UITableViewCellStyle.Value1, reuseIdentifier: "ContactDetail"); } addressCell!.Build(Location); return addressCell; } As I say I'm completely baffled, the Build function calls the correct function in the tableviewcell. Any help will be gratefully appreciated. Ta

    Read the article

  • How do i install apache on my ubuntu 12.04 where it has virtualhost

    - by YumYumYum
    According to the docs https://help.ubuntu.com/10.04/serverguide/httpd.html i have done following, and that is almost how i do always in my Fedora, but Ubuntu looks like its not working. a) DNS to IP $ echo "127.0.0.1 a" > /etc/hosts $ echo "127.0.0.1 b" > /etc/hosts b) Apache virtualhost $ ls 1 2 default default.backup default-ssl $ cat 1 <VirtualHost *:80> ServerName a ServerAlias a DocumentRoot /var/www/html/a/public <Directory /var/www/html/a/public> #AddDefaultCharset utf-8 DirectoryIndex index.php AllowOverride All Order allow,deny Allow from all </Directory> </VirtualHost> $ cat 2 <VirtualHost *:80> ServerName b ServerAlias b DocumentRoot /var/www/html/b/public <Directory /var/www/html/b/public> #AddDefaultCharset utf-8 DirectoryIndex index.php AllowOverride All Order allow,deny Allow from all </Directory> </VirtualHost> c) load into Apache and restart the service $ a2ensite 1 $ a2ensite 2 $ a2dissite default $ /etc/init.d/apache2 restart d) Browse the new 2 hosts $ firefox http://a Does not work it goes always with http://a or http://b to /var/www/html How do i fix it so that it goes to its own directory e.g: http://a goes to /var/www/html/a/public not /var/www/html?

    Read the article

  • Error when trying to overwrite an image (it succeeds the first time after iis reset )

    - by Omu
    First time (after iis reset) I succeed to overwrite the image, but if I try again it gives me that GDI error this is my code: [HttpPost] public ActionResult Change() { var file = Request.Files["fileUpload"]; if (file.ContentLength > 0) { var filePath = @ConfigurationManager.AppSettings["storagePath"] + @"\Temp\" + User.Identity.Name + ".jpg"; using (var image = Image.FromStream(file.InputStream)) { var size = ResizeImage(image, filePath, 600, 480, true); return RedirectToAction("Crop", new CropDisplay {ImageWidth = size[0], ImageHeight = size[1]}); } } return RedirectToAction("Index"); } private int[] ResizeImage(Image image, string newFilePath, int newWidth, int maxHeight, bool onlyResizeIfWider) { ... using (var thumbnail = new Bitmap(newWidth, newHeight)) { using (var graphic = Graphics.FromImage(thumbnail)) { graphic.InterpolationMode = InterpolationMode.HighQualityBicubic; graphic.SmoothingMode = SmoothingMode.HighQuality; graphic.PixelOffsetMode = PixelOffsetMode.HighQuality; graphic.CompositingQuality = CompositingQuality.HighQuality; graphic.DrawImage(image, 0, 0, newWidth, newHeight); var info = ImageCodecInfo.GetImageEncoders(); var encoderParameters = new EncoderParameters(1); encoderParameters.Param[0] = new EncoderParameter(Encoder.Quality, 100L); //this is where I get the GDI error thumbnail.Save(newFilePath, info[1], encoderParameters); return new[] { newWidth, newHeight }; } } }

    Read the article

  • S3sync not working

    - by user57833
    Hello, I managed to get s3sync to upload my test folder to Amazon S3 and can see it in the MWS Managment Console. Downloading the data back to a test folder results in the following error message: root@mybucketname:/var/s3sync# ./week_download.sh s3Prefix backups/weekly localPrefix /var/s3sync/testdown/weekly s3TreeRecurse mybucketname backups/weekly Creating new connection Trying command list_bucket mybucketname prefix backups/weekly max-keys 200 delimiter / with 100 retries le ft Response code: 200 prefix found: / s3TreeRecurse mybucketname backups/weekly / Trying command list_bucket mybucketname prefix backups/weekly/ max-keys 200 delimiter / with 100 retries l eft Response code: 200 S3 item backups/weekly/ s3 node object init. Name: Path:backups/weekly Size:0 Tag:d41d8cd98f00b204e9800998ecf8427e Date:Fri O ct 29 14:21:53 UTC 2010 local node object init. Name: Path:/var/s3sync/testdown/weekly/ Size: Tag: Date: source: dest: Update node s3sync.rb:638:in initialize': No such file or directory - /var/s3sync/testdown/weekly/.s3syncTemp (E rrno::ENOENT) from s3sync.rb:638:inopen' from s3sync.rb:638:in updateFrom' from s3sync.rb:393:inmain' from s3sync.rb:735 I am using the following download script: !/bin/bash script to download local directory upto s3 cd /var/s3sync/ export AWS_ACCESS_KEY_ID=nothing to see here export AWS_SECRET_ACCESS_KEY=nothing to see here export SSL_CERT_DIR=/var/s3sync/certs ruby s3sync.rb -r -v -d --progress --make-dirs mybucket:backups/weekly /var/s3sync/testdown copy and modify line above for each additional folder to be synced Any idea's? Does the download script need to download to the source of Amazon S3 i.e testup folder? Was hoping on the instance of a complete failure and the original folders won't exist that it would just download everything from me. Note: changed my bucket names to "mybucketname" so that it is not public!

    Read the article

  • GUnload is null or undefined using Directions Service

    - by user1677756
    I'm getting an error using Google Maps API V3 that I don't understand. My initial map displays just fine, but when I try to get directions, I get the following two errors: Error: The value of the property 'GUnload' is null or undefined, not a Function object Error: Unable to get value of the property 'setDirections': object is null or undefined I'm not using GUnload anywhere, so I don't understand why I'm getting that error. As far as the second error is concerned, it's as if something is wrong with the Directions service. Here is my code: var directionsDisplay; var directionsService = new google.maps.DirectionsService(); var map; function initialize(address) { directionsDisplay = new google.maps.DirectionsRenderer(); var geocoder = new google.maps.Geocoder(); var latlng = new google.maps.LatLng(42.733963, -84.565501); var mapOptions = { center: latlng, zoom: 15, mapTypeId: google.maps.MapTypeId.ROADMAP }; map = new google.maps.Map(document.getElementById("map_canvas"), mapOptions); geocoder.geocode({ 'address': address }, function (results, status) { if (status == google.maps.GeocoderStatus.OK) { map.setCenter(results[0].geometry.location); var marker = new google.maps.Marker({ map: map, position: results[0].geometry.location }); } else { alert("Geocode was not successful for the following reason: " + status); } }); directionsDisplay.setMap(map); } function getDirections(start, end) { var request = { origin:start, destination:end, travelMode: google.maps.TravelMode.DRIVING }; directionsService.route(request, function(result, status) { if (status == google.maps.DirectionsStatus.OK) { directionsDisplay.setDirections(result); } else { alert("Directions cannot be displayed for the following reason: " + status); } }); } I'm not very savvy with javascript, so I could have made some sort of error there. I appreciate any help I can get.

    Read the article

  • where Redirect permanent rule need to be add

    - by eli1128
    I want redirect my web site http request to https my web site is https://test my apache is version 2.4 and ssl configration is (ssl.conf) on separate file from httpd.conf and I am not using .htaccess file so where I should append. i have tried on both file but didn't work. Redirect permanent / https://test is that should be on my httpd.conf or ssl.conf or did I miss something else. I prefer to use redirect over rewrite. Rewrite.log 10.10.86.1 - - [05/Apr/2012:15:10:19 --0700] [test/sid#7ce00][rid#277448/initial/redir#1] (2) init rewrite engine with requested uri /error/HTTP_BAD_REQUEST.html.var 10.10.86.1 - - [05/Apr/2012:15:10:19 --0700] [test/sid#7ce00][rid#277448/initial/redir#1] (3) applying pattern '^(.*)$' to uri '/error/HTTP_BAD_REQUEST.html.var' 10.10.86.1 - - [05/Apr/2012:15:10:19 --0700] [test/sid#7ce00][rid#277448/initial/redir#1] (4) RewriteCond: input='off' pattern='!=on' = matched 10.10.86.1 - - [05/Apr/2012:15:10:19 --0700] [test/sid#7ce00][rid#277448/initial/redir#1] (2) rewrite /error/HTTP_BAD_REQUEST.html.var - *ttps://test/error/HTTP_BAD_REQUEST.html.var[QSA,R=301,L] 10.10.86.1 - - [05/Apr/2012:15:10:19 --0700] [test/sid#7ce00][rid#277448/initial /redir#1] (2) implicitly forcing redirect (rc=302) with *ttps://test/error/HTTP_BAD_REQUEST.html.var[QSA,R=301,L] 10.10.86.1 - - [05/Apr/2012:15:10:19 --0700] [test/sid#7ce00][rid#277448/initial/redir#1] (1) escaping *ttps://test/error/HTTP_BAD_REQUEST.html.var[QSA,R=301,L] for redirect 10.10.86.1 - - [05/Apr/2012:15:10:19 --0700] [test/sid#7ce00][rid#277448/initial/redir#1] (1) redirect to *ttps://test/error/HTTP_BAD_REQUEST.html.var%5bQSA,R=301,L%5d [REDIRECT/302]

    Read the article

  • How to open popup behind main window (HTML,jQuery)

    - by sara.ma
    I'm new. i have a popup code that when user click anywhere in the HTML page, a popup window shows up: (function () { document.onclick = function () { var sUrl = "http://URL.com"; if (typeof daily_capping == "undefined") var daily_capping = 10; if (typeof capping_minutes == "undefined") var capping_minutes = 60; if (document.cookie.indexOf("_popwin=") === -1) { var ads2day = document.cookie.split("_popwinDaily=")[1]; ads2day = typeof ads2day == "undefined" ? 0 : parseInt(ads2day.split(";")[0]); if (ads2day < daily_capping) { var isMSIE = navigator.userAgent.indexOf("MSIE") != -1 ? !0 : !1, _parent = self, sOptions, popunder; if (top != self) try { top.document.location.toString() && (_parent = top) } catch (err) {} sOptions = "toolbar=no,scrollbars=yes,location=yes,statusbar=yes,menubar=no,resizable=1,width=" + screen.width.toString() + ",height=" + (screen.height - 20).toString() + ",screenX=0,screenY=0,left=0,top=0", popunder = _parent.window.open(sUrl, "rhpop", sOptions); if (popunder) { popunder.blur(); if (isMSIE) { window.focus(); try { opener.window.focus() } catch (err) {} } else popunder.init = function (e) { with(e)(function () { if (typeof window.mozPaintCount != "undefined" || typeof navigator.webkitGetUserMedia == "function") { var e = window.open("about:blank"); e.close() } try { opener.window.focus() } catch (t) {} })() }, popunder.params = { url: sUrl }, popunder.init(popunder) } var now = new Date, popDaily = (new Date(now.getUTCFullYear(), now.getUTCMonth(), now.getUTCDate(), 23, 59, 59)).toGMTString(); document.cookie = "_popwinDaily=" + (ads2day + 1) + ";expires=" + popDaily + ";path=/"; var popInterval = new Date; popInterval.setTime(popInterval.getTime() + capping_minutes * 60 * 1e3), document.cookie = "_popwin=1;expires=" + popInterval.toGMTString() + ";path=/" } } } })(); but popup is on top. is it possible to make it open behind main page?? is there any lighter popup code for this purpose? thanks guys

    Read the article

  • splice() not working on correctly

    - by adardesign
    I am setting a cookie for each navigation container that is clicked on. It sets an array that is joined and set the cookie value. if its clicked again then its removed from the array. It somehow buggy. It only splices after clicking on other elements. and then it behaves weird. It might be that splice is not the correct method Thanks much. var navLinkToOpen; var setNavCookie = function(value){ var isSet = false; var checkCookies = checkNavCookie() setCookieHelper = checkCookies? checkCookies.split(","): []; for(i in setCookieHelper){ if(value == setCookieHelper[i]){ setCookieHelper.splice(value,1); isSet = true; } } if(!isSet){setCookieHelper.push(value)} setCookieHelper.join(",") document.cookie = "navLinkToOpen"+"="+setCookieHelper; } var checkNavCookie = function(){ var allCookies = document.cookie.split( ';' ); for (i = 0; i < allCookies.length; i++ ){ temp = allCookies[i].split("=") if(temp[0].match("navLinkToOpen")){ var getValue = temp[1] } } return getValue || false } $(document).ready(function() { $("#LeftNav li").has("b").addClass("navHeader").not(":first").siblings("li").hide() $(".navHeader").click(function(){ $(this).toggleClass("collapsed").nextUntil("li:has('b')").slideToggle(300); setNavCookie($('.navHeader').index($(this))) return false }) var testCookies = checkNavCookie(); if(testCookies){ finalArrayValue = testCookies.split(",") for(i in finalArrayValue){ $(".navHeader").eq(finalArrayValue[i]).toggleClass("collapsed").nextUntil(".navHeader").slideToggle (0); } } });

    Read the article

  • Why do I get Error#2036 in flash AS3 and how to solve this?

    - by sydas
    I'm currently building an application in flash in relation to RSS/XML feeds for a project. I'm stuck at the moment because I keep getting this error: Error opening URL 'http://distilleryimage6.instagram.com/.jpg' Error #2044: Unhandled IOErrorEvent:. text=Error #2036: Load Never Completed. I know my string picURL is not functioning properly, but am I missing something that makes it not functional? This is my code: package { import flash.display.*; import flash.events.*; import flash.net.*; public class instagramFeed extends MovieClip { //link to #rit xml loader public var ritFileRequest = new URLRequest("http://instagram.com/tags/rit/feed/recent.rss"); public var ritXmlLoader = new URLLoader(); //link to #rochester xml loader // same as above public variables public function instagramFeed() { // constructor code trace("About to load..."); //Loads #rit hashtag xml data. ritXmlLoader.load(ritFileRequest); ritXmlLoader.addEventListener(Event.COMPLETE, displayRITInfo); } //focuses on data with #rit hashtag public function displayRITInfo(e:Event):void{ var ritInstagramData:XML = new XML(ritXmlLoader.data); var ritInfoList:XMLList = ritInstagramData.elements().item; trace(ritInfoList); //load the image var ritPic:String = ritInfoList.*::condition.@code; var picURL:String = "http://distilleryimage6.instagram.com/" + ritPic + ".jpg"; trace(picURL); //show the image on the stage! var ritImageRequest:URLRequest = new URLRequest(picURL); var ritImageLoader:Loader = new Loader(); ritImageLoader.load(ritImageRequest); addChild(ritImageLoader); ritImageLoader.x=200; ritImageLoader.y=100; ritImageLoader.scaleX = 3; ritImageLoader.scaleY = 3; } } }

    Read the article

  • How to make this JavaScript much faster?

    - by Ralph
    Still trying to answer this question, and I think I finally found a solution, but it runs too slow. var $div = $('<div>') .css({ 'border': '1px solid red', 'position': 'absolute', 'z-index': '65535' }) .appendTo('body'); $('body *').live('mousemove', function(e) { var topElement = null; $('body *').each(function() { if(this == $div[0]) return true; var $elem = $(this); var pos = $elem.offset(); var width = $elem.width(); var height = $elem.height(); if(e.pageX > pos.left && e.pageY > pos.top && e.pageX < (pos.left + width) && e.pageY < (pos.top + height)) { var zIndex = document.defaultView.getComputedStyle(this, null).getPropertyValue('z-index'); if(zIndex == 'auto') zIndex = $elem.parents().length; if(topElement == null || zIndex > topElement.zIndex) { topElement = { 'node': $elem, 'zIndex': zIndex }; } } }); if(topElement != null ) { var $elem = topElement.node; $div.offset($elem.offset()).width($elem.width()).height($elem.height()); } }); It basically loops through all the elements on the page and finds the top-most element beneath the cursor. Is there maybe some way I could use a quad-tree or something and segment the page so the loop runs faster?

    Read the article

  • Google Apps Script: how to make suggest box library to work?

    - by Pythonista's Apprentice
    I'm trying to add an autocomplete feature in my Google Spreadsheet using this Google Apps Script suggest box library from Romain Vialard and James Ferreira's book: function doGet() { // Get a list of all my Contacts var contacts = ContactsApp.getContacts(); var list = []; for(var i = 0; i < contacts.length; i++){ var emails = contacts[i].getEmails(); if(emails[0] != undefined){ list.push(emails[0].getAddress()); } } var app = UiApp.createApplication(); var suggestBox = SuggestBoxCreator.createSuggestBox(app, 'contactPicker', 200, list); app.add(suggestBox); return app; } function onEdit() { var s = SpreadsheetApp.getActiveSheet(); if( s.getName() == "my_sheet_name" ) { //checks that we're on the correct sheet var r = s.getActiveCell(); if( r.getColumn() == 1) { doGet(); } } } But when I start editing the column 1 of "my_sheet_name" nothing hapens (if I replace doGet() for other function, this other function runs Ok). I've already installed the Suggest Box library. So, why the doGet() function doesn't work?

    Read the article

  • javascript freezeing ie8

    - by florin
    Can someone tell me why does this code freeze ie8? It is supposed to generate input fields. In firefox, safari, chrome it works, but in in8 when i press generate button it freezes var monthNames = [ "Ianuarie", "Februarie", "Martie", "Aprilie", "Mai", "Iunie", "Iulie", "August", "Septembrie", "Octombrie", "Noiembrie", "Decembrie" ]; function buildMonthlyEntries() { var startDate = new Date(document.getElementById('datastart').value); var endDate = new Date(document.getElementById('dataend').value); if (startDate == "Invalid Date" || endDate == "Invalid Date") { return null; } var monthlyEntries = document.getElementById('monthlyEntries'); monthlyEntries.innerHTML = ""; // inclusiv dataend endDate.setMonth(endDate.getMonth() + 1); // start with startDate; loop until we reach endDate for (var dt = startDate; ! ( dt.getFullYear() == endDate.getFullYear() && dt.getMonth() == endDate.getMonth() ); dt.setMonth( dt.getMonth() + 1 ) ) { monthlyEntries.appendChild( document.createTextNode( monthNames[dt.getMonth()] + " " + String(dt.getFullYear()).substring(2) ) ); var textElement = document.createElement('input'); var textElement2 = document.createElement('input'); var textElement3 = document.createElement('input'); textElement.setAttribute('type', 'text'); //textElement.setAttribute('name', 'entry['+ monthNames[dt.getMonth()] + + String(dt.getFullYear()).substring(2) + ']'); textElement.setAttribute('name', 'entry[]'); textElement2.setAttribute('type', 'hidden'); textElement2.setAttribute('name', 'luna[]'); textElement2.setAttribute('value', '' + monthNames[dt.getMonth()] + ''); textElement3.setAttribute('type', 'hidden'); textElement3.setAttribute('name', 'an[]'); textElement3.setAttribute('value', '' + String(dt.getFullYear()) + ''); monthlyEntries.appendChild(textElement); monthlyEntries.appendChild(textElement2); monthlyEntries.appendChild(textElement3); // adauga br // monthlyEntries.appendChild(document.createElement("br")); } return null; }

    Read the article

  • Live clock javascript starts from my custom time

    - by newworroo
    I was trying to create a live/dynamic clock is based on my custom time instead of system time. There are many scripts, but I couldn't find the clock starts from my custom time. Here is an example that I'm trying to modify. The problem is the seconds doesn't change, and it looks like I need to use ajax. Is there any way to do it without ajax? If not, help me to do it using ajax!!! The reason I don't like ajax method is that another page should be called and refreshed, so it will eat server ram. ex) http://www.javascriptkit.com/script/cut2.shtml Before: <script> function show(){ var Digital=new Date() var hours=Digital.getHours() var minutes=Digital.getMinutes() var seconds=Digital.getSeconds() ... ... After: <script> function show(){ var Digital=new Date() var hours=<?php echo $hr; ?>; var minutes=<?php echo $min; ?>; var seconds=<?php echo $sec; ?>; ... ...

    Read the article

  • Finding the closest match

    - by doublescorpio
    I Have an object with a set of parameters like: var obj = new {Param1 = 100; Param2 = 212; Param3 = 311; param4 = 11; Param5 = 290;} On the other side i have a list of object: var obj1 = new {Param1 = 1221; Param2 = 212; Param3 = 311; param4 = 11; Param5 = 290;} var obj3 = new {Param1 = 35; Param2 = 11; Param3 = 319; param4 = 211; Param5 = 790;} var obj4 = new {Param1 = 126; Param2 = 218; Param3 = 2; param4 = 6; Param5 = 190;} var obj5 = new {Param1 = 213; Param2 = 121; Param3 = 61; param4 = 11; Param5 = 29;} var obj7 = new {Param1 = 161; Param2 = 21; Param3 = 71; param4 = 51; Param5 = 232;} var obj9 = new {Param1 = 891; Param2 = 58; Param3 = 311; param4 = 21; Param5 = 590;} var obj11 = new {Param1 = 61; Param2 = 212; Param3 = 843; param4 = 89; Param5 = 210;} What is the best (easiest) algorithm to find the closest match for the first obj in the listed objects?

    Read the article

  • How to open a chat window in sender and receiver side [on hold]

    - by DEEPS
    When i am trying to send a message from sender the chat window is always opening in senders side instead of receiver side.so please give a correct code to display chat box in both side. (HTML 5, JAVASCRIPT,JQUERY). This is client side code: //Send private message function sendPvtMsg(data) { var pvtmsg = data; socket.emit('message',JSON.stringify({msg: 'pvtMsg', data: { from: userName, to: toChat, pvtmsg: data }}),roomId); } socket.on('message',function(data) { var command = JSON.parse(data); var itemName = command.msg; var rec_data = command.data.message; var sender = command.data.name; //Receive message from server if (itemName == "message") { document.getElementById("chat").value += sender + " : " + rec_data + "\n"; } //Receive private message else if (itemName == "pvtMsg") { var to = command.data.to; var from = command.data.from; //To display message to sender and receiver if (userName == to || userName == from) { var pvtmsg = command.data.pvtmsg; document.getElementById("chat").value += from + "( to " + to + ")" + " : " + pvtmsg + "\n"; } } function createChatBox(chatboxtitle,minimizeChatBox) { if ($("#chatbox_"+chatboxtitle).length > 0) { if ($("#chatbox_"+chatboxtitle).css('display') == 'none') { $("#chatbox_"+chatboxtitle).css('display','block'); restructureChatBoxes(); } $("#chatbox_"+chatboxtitle+" .chatboxtextarea").focus(); return; }

    Read the article

  • Consume WCF Service InProcess using Agatha and WCF

    - by REA_ANDREW
    I have been looking into this lately for a specific reason.  Some integration tests I want to write I want to control the types of instances which are used inside the service layer but I want that control from the test class instance.  One of the problems with just referencing the service is that a lot of the time this will by default be done inside a different process.  I am using StructureMap as my DI of choice and one of the tools which I am using inline with RhinoMocks is StructureMap.AutoMocking.  With StructureMap the main entry point is the ObjectFactory.  This will be process specific so if I decide that the I want a certain instance of a type to be used inside the ServiceLayer I cannot configure the ObjectFactory from my test class as that will only apply to the process which it belongs to. This is were I started thinking about two things: Running a WCF in process Being able to share mocked instances across processes A colleague in work pointed me to a project which is for the latter but I thought that it would be a better solution if I could run the WCF Service in process.  One of the projects which I use when I think about WCF Services is AGATHA, and the one which I have to used to try and get my head around doing this. Another asset I have is a book called Programming WCF Services by Juval Lowy and if you have not heard of it or read it I would definately recommend it.  One of the many topics that is inside this book is the type of configuration you need to communicate with a service in the same process, and it turns out to be quite simple from a config point of view. <system.serviceModel> <services> <service name="Agatha.ServiceLayer.WCF.WcfRequestProcessor"> <endpoint address ="net.pipe://localhost/MyPipe" binding="netNamedPipeBinding" contract="Agatha.Common.WCF.IWcfRequestProcessor"/> </service> </services> <client> <endpoint name="MyEndpoint" address="net.pipe://localhost/MyPipe" binding="netNamedPipeBinding" contract="Agatha.Common.WCF.IWcfRequestProcessor"/> </client> </system.serviceModel>   You can see here that I am referencing the Agatha object and contract here, but also that my binding and the address is something called Named Pipes.  THis is sort of the “Magic” which makes it happen in the same process. Next I need to open the service prior to calling the methods on a proxy which I also need.  My initial attempt at the proxy did not use any Agatha specific coding and one of the pains I found was that you obviously need to give your proxy the known types which the serializer can be aware of.  So we need to add to the known types of the proxy programmatically.  I came across the following blog post which showed me how easy it was http://bloggingabout.net/blogs/vagif/archive/2009/05/18/how-to-programmatically-define-known-types-in-wcf.aspx. First Pass So with this in mind, and inside a console app this was my first pass at consuming a service in process.  First here is the proxy which I made making use of the Agatha IWcfRequestProcessor contract. public class InProcProxy : ClientBase<Agatha.Common.WCF.IWcfRequestProcessor>, Agatha.Common.WCF.IWcfRequestProcessor { public InProcProxy() { } public InProcProxy(string configurationName) : base(configurationName) { } public Agatha.Common.Response[] Process(params Agatha.Common.Request[] requests) { return Channel.Process(requests); } public void ProcessOneWayRequests(params Agatha.Common.OneWayRequest[] requests) { Channel.ProcessOneWayRequests(requests); } } So with the proxy in place I could then use this after opening the service so here is the code which I use inside the console app make the request. static void Main(string[] args) { ComponentRegistration.Register(); ServiceHost serviceHost = new ServiceHost(typeof(Agatha.ServiceLayer.WCF.WcfRequestProcessor)); serviceHost.Open(); Console.WriteLine("Service is running...."); using (var proxy = new InProcProxy()) { foreach (var operation in proxy.Endpoint.Contract.Operations) { foreach (var t in KnownTypeProvider.GetKnownTypes(null)) { operation.KnownTypes.Add(t); } } var request = new GetProductsRequest(); var responses = proxy.Process(new[] { request }); var response = (GetProductsResponse)responses[0]; Console.WriteLine("{0} Products have been retrieved", response.Products.Count); } serviceHost.Close(); Console.WriteLine("Finished"); Console.ReadLine(); } So what I used here is the KnownTypeProvider of Agatha to easily get all the types I need for the service/proxy and add them to the proxy.  My Request handler for this was just a test one which always returned 2 products. public class GetProductsHandler : RequestHandler<GetProductsRequest,GetProductsResponse> { public override Agatha.Common.Response Handle(GetProductsRequest request) { return new GetProductsResponse { Products = new List<ProductDto> { new ProductDto{}, new ProductDto{} } }; } } Second Pass Now after I did this I started reading up some more on some resources including more by Davy Brion and others on Agatha.  Now it turns out that the work I did above to create a derived class of the ClientBase implementing Agatha.Common.WCF.IWcfRequestProcessor was not necessary due to a nice class which is present inside the Agatha code base, RequestProcessorProxy which takes care of this for you! :-) So disregarding that class I made for the proxy and changing my code to use it I am now left with the following: static void Main(string[] args) { ComponentRegistration.Register(); ServiceHost serviceHost = new ServiceHost(typeof(Agatha.ServiceLayer.WCF.WcfRequestProcessor)); serviceHost.Open(); Console.WriteLine("Service is running...."); using (var proxy = new RequestProcessorProxy()) { var request = new GetProductsRequest(); var responses = proxy.Process(new[] { request }); var response = (GetProductsResponse)responses[0]; Console.WriteLine("{0} Products have been retrieved", response.Products.Count); } serviceHost.Close(); Console.WriteLine("Finished"); Console.ReadLine(); }   Cheers for now, Andy References Agatha WCF InProcess Without WCF StructureMap.AutoMocking Cross Process Mocking Agatha Programming WCF Services by Juval Lowy

    Read the article

  • WatiN screenshot saver

    - by Brian Schroer
    In addition to my automated unit, system and integration tests for ASP.NET projects, I like to give my customers something pretty that they can look at and visually see that the web site is behaving properly. I use the Gallio test runner to produce a pretty HTML report, and WatiN (Web Application Testing In .NET) to test the UI and create screenshots. I have a couple of issues with WatiN’s “CaptureWebPageToFile” method, though: It blew up the first (and only) time I tried it, possibly because… It scrolls down to capture the entire web page (I tried it on a very long page), and I usually don’t need that Also, sometimes I don’t need a picture of the whole browser window - I just want a picture of the element that I'm testing (for example, proving that a button has the correct caption). I wrote a WatiN screenshot saver helper class with these methods: SaveBrowserWindowScreenshot(Watin.Core.IE ie)  / SaveBrowserWindowScreenshot(Watin.Core.Element element) saves a screenshot of the browser window SaveBrowserWindowScreenshotWithHighlight(Watin.Core.Element element) saves a screenshot of the browser window, with the specified element scrolled into view and highlighted SaveElementScreenshot(Watin.Core.Element element) saves a picture of only the specified element The element highlighting improves on the built-in WatiN method (which just gives the element a yellow background, and makes the element pretty much unreadable when you have a light foreground color) by adding the ability to specify a HighlightCssClassName that points to a style in your site’s stylesheet. This code is specifically for testing with Internet Explorer (‘cause that’s what I have to test with at work), but you’re welcome to take it and do with it what you want… using System; using System.Drawing; using System.Drawing.Imaging; using System.IO; using System.Reflection; using System.Runtime.InteropServices; using System.Text; using System.Threading; using SHDocVw; using WatiN.Core; using mshtml; namespace BrianSchroer.TestHelpers { public static class WatinScreenshotSaver { public static void SaveBrowserWindowScreenshotWithHighlight (Element element, string screenshotName) { HighlightElement(element, true); SaveBrowserWindowScreenshot(element, screenshotName); HighlightElement(element, false); } public static void SaveBrowserWindowScreenshotWithHighlight(Element element) { HighlightElement(element, true); SaveBrowserWindowScreenshot(element); HighlightElement(element, false); } public static void SaveBrowserWindowScreenshot(Element element, string screenshotName) { SaveScreenshot(GetIe(element), screenshotName, SaveBitmapForCallbackArgs); } public static void SaveBrowserWindowScreenshot(Element element) { SaveScreenshot(GetIe(element), null, SaveBitmapForCallbackArgs); } public static void SaveBrowserWindowScreenshot(IE ie, string screenshotName) { SaveScreenshot(ie, screenshotName, SaveBitmapForCallbackArgs); } public static void SaveBrowserWindowScreenshot(IE ie) { SaveScreenshot(ie, null, SaveBitmapForCallbackArgs); } public static void SaveElementScreenshot(Element element, string screenshotName) { // TODO: Figure out how to get browser window "chrome" size and not have to go to full screen: var iex = (InternetExplorerClass) GetIe(element).InternetExplorer; bool fullScreen = iex.FullScreen; if (!fullScreen) iex.FullScreen = true; ScrollIntoView(element); SaveScreenshot(GetIe(element), screenshotName, args => SaveElementBitmapForCallbackArgs(element, args)); iex.FullScreen = fullScreen; } public static void SaveElementScreenshot(Element element) { SaveElementScreenshot(element, null); } private static void SaveScreenshot(IE browser, string screenshotName, Action<ScreenshotCallbackArgs> screenshotCallback) { string fileName = string.Format("{0:000}{1}{2}.jpg", ++_screenshotCount, (string.IsNullOrEmpty(screenshotName)) ? "" : " ", screenshotName); string path = Path.Combine(ScreenshotDirectoryName, fileName); Console.WriteLine(); // Gallio HTML-encodes the following display, but I have a utility program to // remove the "HTML===" and "===HTML" and un-encode the rest to show images in the Gallio report: Console.WriteLine("HTML===<div><b>{0}:</br></b><img src=\"{1}\" /></div>===HTML", screenshotName, new Uri(path).AbsoluteUri); MakeBrowserWindowTopmost(browser); try { var args = new ScreenshotCallbackArgs { InternetExplorerClass = (InternetExplorerClass)browser.InternetExplorer, ScreenshotPath = path }; Thread.Sleep(100); screenshotCallback(args); } catch (Exception ex) { Console.WriteLine(ex.Message); } } public static void HighlightElement(Element element, bool doHighlight) { if (!element.Exists) return; if (string.IsNullOrEmpty(HighlightCssClassName)) { element.Highlight(doHighlight); return; } string jsRef = element.GetJavascriptElementReference(); if (string.IsNullOrEmpty(jsRef)) return; var sb = new StringBuilder("try { "); sb.AppendFormat(" {0}.scrollIntoView(false);", jsRef); string format = (doHighlight) ? "{0}.className += ' {1}'" : "{0}.className = {0}.className.replace(' {1}', '')"; sb.AppendFormat(" " + format + ";", jsRef, HighlightCssClassName); sb.Append("} catch(e) {}"); string script = sb.ToString(); GetIe(element).RunScript(script); } public static void ScrollIntoView(Element element) { string jsRef = element.GetJavascriptElementReference(); if (string.IsNullOrEmpty(jsRef)) return; var sb = new StringBuilder("try { "); sb.AppendFormat(" {0}.scrollIntoView(false);", jsRef); sb.Append("} catch(e) {}"); string script = sb.ToString(); GetIe(element).RunScript(script); } public static void MakeBrowserWindowTopmost(IE ie) { ie.BringToFront(); SetWindowPos(ie.hWnd, HWND_TOPMOST, 0, 0, 0, 0, TOPMOST_FLAGS); } public static string HighlightCssClassName { get; set; } private static int _screenshotCount; private static string _screenshotDirectoryName; public static string ScreenshotDirectoryName { get { if (_screenshotDirectoryName == null) { var asm = Assembly.GetAssembly(typeof(WatinScreenshotSaver)); var uri = new Uri(asm.CodeBase); var fileInfo = new FileInfo(uri.LocalPath); string directoryName = fileInfo.DirectoryName; _screenshotDirectoryName = Path.Combine( directoryName, string.Format("Screenshots_{0:yyyyMMddHHmm}", DateTime.Now)); Console.WriteLine("Screenshot folder: {0}", _screenshotDirectoryName); Directory.CreateDirectory(_screenshotDirectoryName); } return _screenshotDirectoryName; } set { _screenshotDirectoryName = value; _screenshotCount = 0; } } [DllImport("user32.dll")] [return: MarshalAs(UnmanagedType.Bool)] private static extern bool SetWindowPos(IntPtr hWnd, IntPtr hWndInsertAfter, int X, int Y, int cx, int cy, uint uFlags); private static readonly IntPtr HWND_TOPMOST = new IntPtr(-1); private const UInt32 SWP_NOSIZE = 0x0001; private const UInt32 SWP_NOMOVE = 0x0002; private const UInt32 TOPMOST_FLAGS = SWP_NOMOVE | SWP_NOSIZE; private static IE GetIe(Element element) { if (element == null) return null; var container = element.DomContainer; while (container as IE == null) container = container.DomContainer; return (IE)container; } private static void SaveBitmapForCallbackArgs(ScreenshotCallbackArgs args) { InternetExplorerClass iex = args.InternetExplorerClass; SaveBitmap(args.ScreenshotPath, iex.Left, iex.Top, iex.Width, iex.Height); } private static void SaveElementBitmapForCallbackArgs(Element element, ScreenshotCallbackArgs args) { InternetExplorerClass iex = args.InternetExplorerClass; Rectangle bounds = GetElementBounds(element); SaveBitmap(args.ScreenshotPath, iex.Left + bounds.Left, iex.Top + bounds.Top, bounds.Width, bounds.Height); } /// <summary> /// This method is used instead of element.NativeElement.GetElementBounds because that /// method has a bug (http://sourceforge.net/tracker/?func=detail&aid=2994660&group_id=167632&atid=843727). /// </summary> private static Rectangle GetElementBounds(Element element) { var ieElem = element.NativeElement as WatiN.Core.Native.InternetExplorer.IEElement; IHTMLElement elem = ieElem.AsHtmlElement; int left = elem.offsetLeft; int top = elem.offsetTop; for (IHTMLElement parent = elem.offsetParent; parent != null; parent = parent.offsetParent) { left += parent.offsetLeft; top += parent.offsetTop; } return new Rectangle(left, top, elem.offsetWidth, elem.offsetHeight); } private static void SaveBitmap(string path, int left, int top, int width, int height) { using (var bitmap = new Bitmap(width, height)) { using (Graphics g = Graphics.FromImage(bitmap)) { g.CopyFromScreen( new Point(left, top), Point.Empty, new Size(width, height) ); } bitmap.Save(path, ImageFormat.Jpeg); } } private class ScreenshotCallbackArgs { public InternetExplorerClass InternetExplorerClass { get; set; } public string ScreenshotPath { get; set; } } } }

    Read the article

  • Errors trying to run MongoDB

    - by SomeKittens
    I'm running Ubuntu Server 12.04 (32 bit) on an old (1998) computer. Everything's working fine until I try and start MongoDB. somekittens@DLserver01:~$ mongo MongoDB shell version: 2.2.2 connecting to: test Sun Dec 16 22:47:50 Error: couldn't connect to server 127.0.0.1:27017 src/mongo/shell/mongo.js:91 exception: connect failed Googling the error lead me to all sorts of "repair" options, none of which fixed anything. I've also removed MongoDB and installed it again (using apt-get, have not built from source). Mongo's log shows the following error: Thu Dec 13 18:36:32 warning: 32-bit servers don't have journaling enabled by default. Please use --journal if you want durability. Thu Dec 13 18:36:32 Thu Dec 13 18:36:32 [initandlisten] MongoDB starting : pid=758 port=27017 dbpath=/var/lib/mongodb 32-bit host=DLserver01 Thu Dec 13 18:36:32 [initandlisten] Thu Dec 13 18:36:32 [initandlisten] ** NOTE: when using MongoDB 32 bit, you are limited to about 2 gigabytes of data Thu Dec 13 18:36:32 [initandlisten] ** see http://blog.mongodb.org/post/137788967/32-bit-limitations Thu Dec 13 18:36:32 [initandlisten] ** with --journal, the limit is lower Thu Dec 13 18:36:32 [initandlisten] Thu Dec 13 18:36:32 [initandlisten] db version v2.2.2, pdfile version 4.5 Thu Dec 13 18:36:32 [initandlisten] git version: d1b43b61a5308c4ad0679d34b262c5af9d664267 Thu Dec 13 18:36:32 [initandlisten] build info: Linux domU-12-31-39-01-70-B4 2.6.21.7-2.fc8xen #1 SMP Fri Feb 15 12:39:36 EST 2008 i686 BOOST_LIB_VERSION=1_49 Thu Dec 13 18:36:32 [initandlisten] options: { config: "/etc/mongodb.conf", dbpath: "/var/lib/mongodb", logappend: "true", logpath: "/var/log/mongodb/mongodb.log" } Thu Dec 13 18:36:32 [initandlisten] Unable to check for journal files due to: boost::filesystem::basic_directory_iterator constructor: No such file or directory: "/var/lib/mongodb/journal" ************** Unclean shutdown detected. Please visit http://dochub.mongodb.org/core/repair for recovery instructions. ************* Thu Dec 13 18:36:32 [initandlisten] exception in initAndListen: 12596 old lock file, terminating Thu Dec 13 18:36:32 dbexit: Thu Dec 13 18:36:32 [initandlisten] shutdown: going to close listening sockets... Thu Dec 13 18:36:32 [initandlisten] shutdown: going to flush diaglog... Thu Dec 13 18:36:32 [initandlisten] shutdown: going to close sockets... Thu Dec 13 18:36:32 [initandlisten] shutdown: waiting for fs preallocator... Thu Dec 13 18:36:32 [initandlisten] shutdown: closing all files... Thu Dec 13 18:36:32 [initandlisten] closeAllFiles() finished Thu Dec 13 18:36:32 dbexit: really exiting now Running through the recovery instructions lead to the following adventure: somekittens@DLserver01:/var/log/mongodb$ mongod --repair Sun Dec 16 22:42:54 Sun Dec 16 22:42:54 warning: 32-bit servers don't have journaling enabled by default. Please use --journal if you want durability. Sun Dec 16 22:42:54 Sun Dec 16 22:42:54 [initandlisten] MongoDB starting : pid=1887 port=27017 dbpath=/data/db/ 32-bit host=DLserver01 Sun Dec 16 22:42:54 [initandlisten] Sun Dec 16 22:42:54 [initandlisten] ** NOTE: when using MongoDB 32 bit, you are limited to about 2 gigabytes of data Sun Dec 16 22:42:54 [initandlisten] ** see http://blog.mongodb.org/post/137788967/32-bit-limitations Sun Dec 16 22:42:54 [initandlisten] ** with --journal, the limit is lower Sun Dec 16 22:42:54 [initandlisten] Sun Dec 16 22:42:54 [initandlisten] db version v2.2.2, pdfile version 4.5 Sun Dec 16 22:42:54 [initandlisten] git version: d1b43b61a5308c4ad0679d34b262c5af9d664267 Sun Dec 16 22:42:54 [initandlisten] build info: Linux domU-12-31-39-01-70-B4 2.6.21.7-2.fc8xen #1 SMP Fri Feb 15 12:39:36 EST 2008 i686 BOOST_LIB_VERSION=1_49 Sun Dec 16 22:42:54 [initandlisten] options: { repair: true } Sun Dec 16 22:42:54 [initandlisten] exception in initAndListen: 10296 ********************************************************************* ERROR: dbpath (/data/db/) does not exist. Create this directory or give existing directory in --dbpath. See http://dochub.mongodb.org/core/startingandstoppingmongo ********************************************************************* , terminating Sun Dec 16 22:42:54 dbexit: Sun Dec 16 22:42:54 [initandlisten] shutdown: going to close listening sockets... Sun Dec 16 22:42:54 [initandlisten] shutdown: going to flush diaglog... Sun Dec 16 22:42:54 [initandlisten] shutdown: going to close sockets... Sun Dec 16 22:42:54 [initandlisten] shutdown: waiting for fs preallocator... Sun Dec 16 22:42:54 [initandlisten] shutdown: closing all files... Sun Dec 16 22:42:54 [initandlisten] closeAllFiles() finished Sun Dec 16 22:42:54 dbexit: really exiting now somekittens@DLserver01:/var/log/mongodb$ sudo mkdir /data somekittens@DLserver01:/var/log/mongodb$ sudo mkdir /data/db somekittens@DLserver01:/var/log/mongodb$ mongod --repair Sun Dec 16 22:43:51 Sun Dec 16 22:43:51 warning: 32-bit servers don't have journaling enabled by default. Please use --journal if you want durability. Sun Dec 16 22:43:51 Sun Dec 16 22:43:51 [initandlisten] MongoDB starting : pid=1909 port=27017 dbpath=/data/db/ 32-bit host=DLserver01 Sun Dec 16 22:43:51 [initandlisten] Sun Dec 16 22:43:51 [initandlisten] ** NOTE: when using MongoDB 32 bit, you are limited to about 2 gigabytes of data Sun Dec 16 22:43:51 [initandlisten] ** see http://blog.mongodb.org/post/137788967/32-bit-limitations Sun Dec 16 22:43:51 [initandlisten] ** with --journal, the limit is lower Sun Dec 16 22:43:51 [initandlisten] Sun Dec 16 22:43:51 [initandlisten] db version v2.2.2, pdfile version 4.5 Sun Dec 16 22:43:51 [initandlisten] git version: d1b43b61a5308c4ad0679d34b262c5af9d664267 Sun Dec 16 22:43:51 [initandlisten] build info: Linux domU-12-31-39-01-70-B4 2.6.21.7-2.fc8xen #1 SMP Fri Feb 15 12:39:36 EST 2008 i686 BOOST_LIB_VERSION=1_49 Sun Dec 16 22:43:51 [initandlisten] options: { repair: true } Sun Dec 16 22:43:51 [initandlisten] exception in initAndListen: 10309 Unable to create/open lock file: /data/db/mongod.lock errno:13 Permission denied Is a mongod instance already running?, terminating Sun Dec 16 22:43:51 dbexit: Sun Dec 16 22:43:51 [initandlisten] shutdown: going to close listening sockets... Sun Dec 16 22:43:51 [initandlisten] shutdown: going to flush diaglog... Sun Dec 16 22:43:51 [initandlisten] shutdown: going to close sockets... Sun Dec 16 22:43:51 [initandlisten] shutdown: waiting for fs preallocator... Sun Dec 16 22:43:51 [initandlisten] shutdown: closing all files... Sun Dec 16 22:43:51 [initandlisten] closeAllFiles() finished Sun Dec 16 22:43:51 [initandlisten] shutdown: removing fs lock... Sun Dec 16 22:43:51 [initandlisten] couldn't remove fs lock errno:9 Bad file descriptor Sun Dec 16 22:43:51 dbexit: really exiting now somekittens@DLserver01:/var/log/mongodb$ service mongodb stop stop: Unknown instance: somekittens@DLserver01:/var/log/mongodb$ sudo mongod --repair Sun Dec 16 22:45:04 Sun Dec 16 22:45:04 warning: 32-bit servers don't have journaling enabled by default. Please use --journal if you want durability. Sun Dec 16 22:45:04 Sun Dec 16 22:45:04 [initandlisten] MongoDB starting : pid=1921 port=27017 dbpath=/data/db/ 32-bit host=DLserver01 Sun Dec 16 22:45:04 [initandlisten] Sun Dec 16 22:45:04 [initandlisten] ** NOTE: when using MongoDB 32 bit, you are limited to about 2 gigabytes of data Sun Dec 16 22:45:04 [initandlisten] ** see http://blog.mongodb.org/post/137788967/32-bit-limitations Sun Dec 16 22:45:04 [initandlisten] ** with --journal, the limit is lower Sun Dec 16 22:45:04 [initandlisten] Sun Dec 16 22:45:04 [initandlisten] db version v2.2.2, pdfile version 4.5 Sun Dec 16 22:45:04 [initandlisten] git version: d1b43b61a5308c4ad0679d34b262c5af9d664267 Sun Dec 16 22:45:04 [initandlisten] build info: Linux domU-12-31-39-01-70-B4 2.6.21.7-2.fc8xen #1 SMP Fri Feb 15 12:39:36 EST 2008 i686 BOOST_LIB_VERSION=1_49 Sun Dec 16 22:45:04 [initandlisten] options: { repair: true } Sun Dec 16 22:45:04 [initandlisten] Unable to check for journal files due to: boost::filesystem::basic_directory_iterator constructor: No such file or directory: "/data/db/journal" Sun Dec 16 22:45:04 [initandlisten] finished checking dbs Sun Dec 16 22:45:04 dbexit: Sun Dec 16 22:45:04 [initandlisten] shutdown: going to close listening sockets... Sun Dec 16 22:45:04 [initandlisten] shutdown: going to flush diaglog... Sun Dec 16 22:45:04 [initandlisten] shutdown: going to close sockets... Sun Dec 16 22:45:04 [initandlisten] shutdown: waiting for fs preallocator... Sun Dec 16 22:45:04 [initandlisten] shutdown: closing all files... Sun Dec 16 22:45:04 [initandlisten] closeAllFiles() finished Sun Dec 16 22:45:04 [initandlisten] shutdown: removing fs lock... Sun Dec 16 22:45:04 dbexit: really exiting now Which didn't change anything. What can I do to resolve this? It's an old computer (640MB RAM, single-core P2). Could that be causing it?

    Read the article

  • Entity Framework v1 &ndash; tips and Tricks Part 3

    - by Rohit Gupta
    General Tips on Entity Framework v1 & Linq to Entities: ToTraceString() If you need to know the underlying SQL that the EF generates for a Linq To Entities query, then use the ToTraceString() method of the ObjectQuery class. (or use LINQPAD) Note that you need to cast the LINQToEntities query to ObjectQuery before calling TotraceString() as follows: 1: string efSQL = ((ObjectQuery)from c in ctx.Contact 2: where c.Address.Any(a => a.CountryRegion == "US") 3: select c.ContactID).ToTraceString(); ================================================================================ MARS or MultipleActiveResultSet When you create a EDM Model (EDMX file) from the database using Visual Studio, it generates a connection string with the same name as the name of the EntityContainer in CSDL. In the ConnectionString so generated it sets the MultipleActiveResultSet attribute to true by default. So if you are running the following query then it streams multiple readers over the same connection: 1: using (BAEntities context = new BAEntities()) 2: { 3: var cons = 4: from con in context.Contacts 5: where con.FirstName == "Jose" 6: select con; 7: foreach (var c in cons) 8: { 9: if (c.AddDate < new System.DateTime(2007, 1, 1)) 10: { 11: c.Addresses.Load(); 12: } 13: } 14: } ================================================================================= Explicitly opening and closing EntityConnection When you call ToList() or foreach on a LINQToEntities query the EF automatically closes the connection after all the records from the query have been consumed. Thus if you need to run many LINQToEntities queries over the same connection then explicitly open and close the connection as follows: 1: using (BAEntities context = new BAEntities()) 2: { 3: context.Connection.Open(); 4: var cons = from con in context.Contacts where con.FirstName == "Jose" 5: select con; 6: var conList = cons.ToList(); 7: var allCustomers = from con in context.Contacts.OfType<Customer>() 8: select con; 9: var allcustList = allCustomers.ToList(); 10: context.Connection.Close(); 11: } ====================================================================== Dispose ObjectContext only if required After you retrieve entities using the ObjectContext and you are not explicitly disposing the ObjectContext then insure that your code does consume all the records from the LinqToEntities query by calling .ToList() or foreach statement, otherwise the the database connection will remain open and will be closed by the garbage collector when it gets to dispose the ObjectContext. Secondly if you are making updates to the entities retrieved using LinqToEntities then insure that you dont inadverdently dispose of the ObjectContext after the entities are retrieved and before calling .SaveChanges() since you need the SAME ObjectContext to keep track of changes made to the Entities (by using ObjectStateEntry objects). So if you do need to explicitly dispose of the ObjectContext do so only after calling SaveChanges() and only if you dont need to change track the entities retrieved any further. ======================================================================= SQL InjectionAttacks under control with EFv1 LinqToEntities and LinqToSQL queries are parameterized before they are sent to the DB hence they are not vulnerable to SQL Injection attacks. EntitySQL may be slightly vulnerable to attacks since it does not use parameterized queries. However since the EntitySQL demands that the query be valid Entity SQL syntax and valid native SQL syntax at the same time. So the only way one can do a SQLInjection Attack is by knowing the SSDL of the EDM Model and be able to write the correct EntitySQL (note one cannot append regular SQL since then the query wont be a valid EntitySQL syntax) and append it to a parameter. ====================================================================== Improving Performance You can convert the EntitySets and AssociationSets in a EDM Model into precompiled Views using the edmgen utility. for e.g. the Customer Entity can be converted into a precompiled view using edmgen and all LinqToEntities query against the contaxt.Customer EntitySet will use the precompiled View instead of the EntitySet itself (the same being true for relationships (EntityReference & EntityCollections of a Entity)). The advantage being that when using precompiled views the performance will be much better. The syntax for generating precompiled views for a existing EF project is : edmgen /mode:ViewGeneration /inssdl:BAModel.ssdl /incsdl:BAModel.csdl /inmsl:BAModel.msl /p:Chap14.csproj Note that this will only generate precompiled views for EntitySets and Associations and not for existing LinqToEntities queries in the project.(for that use CompiledQuery.Compile<>) Secondly if you have a LinqToEntities query that you need to run multiple times, then one should precompile the query using CompiledQuery.Compile method. The CompiledQuery.Compile<> method accepts a lamda expression as a parameter, which denotes the LinqToEntities query  that you need to precompile. The following is a example of a lamda that we can pass into the CompiledQuery.Compile() method 1: Expression<Func<BAEntities, string, IQueryable<Customer>>> expr = (BAEntities ctx1, string loc) => 2: from c in ctx1.Contacts.OfType<Customer>() 3: where c.Reservations.Any(r => r.Trip.Destination.DestinationName == loc) 4: select c; Then we call the Compile Query as follows: 1: var query = CompiledQuery.Compile<BAEntities, string, IQueryable<Customer>>(expr); 2:  3: using (BAEntities ctx = new BAEntities()) 4: { 5: var loc = "Malta"; 6: IQueryable<Customer> custs = query.Invoke(ctx, loc); 7: var custlist = custs.ToList(); 8: foreach (var item in custlist) 9: { 10: Console.WriteLine(item.FullName); 11: } 12: } Note that if you created a ObjectQuery or a Enitity SQL query instead of the LINQToEntities query, you dont need precompilation for e.g. 1: An Example of EntitySQL query : 2: string esql = "SELECT VALUE c from Contacts AS c where c is of(BAGA.Customer) and c.LastName = 'Gupta'"; 3: ObjectQuery<Customer> custs = CreateQuery<Customer>(esql); 1: An Example of ObjectQuery built using ObjectBuilder methods: 2: from c in Contacts.OfType<Customer>().Where("it.LastName == 'Gupta'") 3: select c This is since the Query plan is cached and thus the performance improves a bit, however since the ObjectQuery or EntitySQL query still needs to materialize the results into Entities hence it will take the same amount of performance hit as with LinqToEntities. However note that not ALL EntitySQL based or QueryBuilder based ObjectQuery plans are cached. So if you are in doubt always create a LinqToEntities compiled query and use that instead ============================================================ GetObjectStateEntry Versus GetObjectByKey We can get to the Entity being referenced by the ObjectStateEntry via its Entity property and there are helper methods in the ObjectStateManager (osm.TryGetObjectStateEntry) to get the ObjectStateEntry for a entity (for which we know the EntityKey). Similarly The ObjectContext has helper methods to get an Entity i.e. TryGetObjectByKey(). TryGetObjectByKey() uses GetObjectStateEntry method under the covers to find the object, however One important difference between these 2 methods is that TryGetObjectByKey queries the database if it is unable to find the object in the context, whereas TryGetObjectStateEntry only looks in the context for existing entries. It will not make a trip to the database ============================================================= POCO objects with EFv1: To create POCO objects that can be used with EFv1. We need to implement 3 key interfaces: IEntityWithKey IEntityWithRelationships IEntityWithChangeTracker Implementing IEntityWithKey is not mandatory, but if you dont then we need to explicitly provide values for the EntityKey for various functions (for e.g. the functions needed to implement IEntityWithChangeTracker and IEntityWithRelationships). Implementation of IEntityWithKey involves exposing a property named EntityKey which returns a EntityKey object. Implementation of IEntityWithChangeTracker involves implementing a method named SetChangeTracker since there can be multiple changetrackers (Object Contexts) existing in memory at the same time. 1: public void SetChangeTracker(IEntityChangeTracker changeTracker) 2: { 3: _changeTracker = changeTracker; 4: } Additionally each property in the POCO object needs to notify the changetracker (objContext) that it is updating itself by calling the EntityMemberChanged and EntityMemberChanging methods on the changeTracker. for e.g.: 1: public EntityKey EntityKey 2: { 3: get { return _entityKey; } 4: set 5: { 6: if (_changeTracker != null) 7: { 8: _changeTracker.EntityMemberChanging("EntityKey"); 9: _entityKey = value; 10: _changeTracker.EntityMemberChanged("EntityKey"); 11: } 12: else 13: _entityKey = value; 14: } 15: } 16: ===================== Custom Property ==================================== 17:  18: [EdmScalarPropertyAttribute(IsNullable = false)] 19: public System.DateTime OrderDate 20: { 21: get { return _orderDate; } 22: set 23: { 24: if (_changeTracker != null) 25: { 26: _changeTracker.EntityMemberChanging("OrderDate"); 27: _orderDate = value; 28: _changeTracker.EntityMemberChanged("OrderDate"); 29: } 30: else 31: _orderDate = value; 32: } 33: } Finally you also need to create the EntityState property as follows: 1: public EntityState EntityState 2: { 3: get { return _changeTracker.EntityState; } 4: } The IEntityWithRelationships involves creating a property that returns RelationshipManager object: 1: public RelationshipManager RelationshipManager 2: { 3: get 4: { 5: if (_relManager == null) 6: _relManager = RelationshipManager.Create(this); 7: return _relManager; 8: } 9: } ============================================================ Tip : ProviderManifestToken – change EDMX File to use SQL 2008 instead of SQL 2005 To use with SQL Server 2008, edit the EDMX file (the raw XML) changing the ProviderManifestToken in the SSDL attributes from "2005" to "2008" ============================================================= With EFv1 we cannot use Structs to replace a anonymous Type while doing projections in a LINQ to Entities query. While the same is supported with LINQToSQL, it is not with LinqToEntities. For e.g. the following is not supported with LinqToEntities since only parameterless constructors and initializers are supported in LINQ to Entities. (the same works with LINQToSQL) 1: public struct CompanyInfo 2: { 3: public int ID { get; set; } 4: public string Name { get; set; } 5: } 6: var companies = (from c in dc.Companies 7: where c.CompanyIcon == null 8: select new CompanyInfo { Name = c.CompanyName, ID = c.CompanyId }).ToList(); ;

    Read the article

  • The fastest way to resize images from ASP.NET. And it’s (more) supported-ish.

    - by Bertrand Le Roy
    I’ve shown before how to resize images using GDI, which is fairly common but is explicitly unsupported because we know of very real problems that this can cause. Still, many sites still use that method because those problems are fairly rare, and because most people assume it’s the only way to get the job done. Plus, it works in medium trust. More recently, I’ve shown how you can use WPF APIs to do the same thing and get JPEG thumbnails, only 2.5 times faster than GDI (even now that GDI really ultimately uses WIC to read and write images). The boost in performance is great, but it comes at a cost, that you may or may not care about: it won’t work in medium trust. It’s also just as unsupported as the GDI option. What I want to show today is how to use the Windows Imaging Components from ASP.NET APIs directly, without going through WPF. The approach has the great advantage that it’s been tested and proven to scale very well. The WIC team tells me you should be able to call support and get answers if you hit problems. Caveats exist though. First, this is using interop, so until a signed wrapper sits in the GAC, it will require full trust. Second, the APIs have a very strong smell of native code and are definitely not .NET-friendly. And finally, the most serious problem is that older versions of Windows don’t offer MTA support for image decoding. MTA support is only available on Windows 7, Vista and Windows Server 2008. But on 2003 and XP, you’ll only get STA support. that means that the thread safety that we so badly need for server applications is not guaranteed on those operating systems. To make it work, you’d have to spin specialized threads yourself and manage the lifetime of your objects, which is outside the scope of this article. We’ll assume that we’re fine with al this and that we’re running on 7 or 2008 under full trust. Be warned that the code that follows is not simple or very readable. This is definitely not the easiest way to resize an image in .NET. Wrapping native APIs such as WIC in a managed wrapper is never easy, but fortunately we won’t have to: the WIC team already did it for us and released the results under MS-PL. The InteropServices folder, which contains the wrappers we need, is in the WicCop project but I’ve also included it in the sample that you can download from the link at the end of the article. In order to produce a thumbnail, we first have to obtain a decoding frame object that WIC can use. Like with WPF, that object will contain the command to decode a frame from the source image but won’t do the actual decoding until necessary. Getting the frame is done by reading the image bytes through a special WIC stream that you can obtain from a factory object that we’re going to reuse for lots of other tasks: var photo = File.ReadAllBytes(photoPath); var factory = (IWICComponentFactory)new WICImagingFactory(); var inputStream = factory.CreateStream(); inputStream.InitializeFromMemory(photo, (uint)photo.Length); var decoder = factory.CreateDecoderFromStream( inputStream, null, WICDecodeOptions.WICDecodeMetadataCacheOnLoad); var frame = decoder.GetFrame(0); We can read the dimensions of the frame using the following (somewhat ugly) code: uint width, height; frame.GetSize(out width, out height); This enables us to compute the dimensions of the thumbnail, as I’ve shown in previous articles. We now need to prepare the output stream for the thumbnail. WIC requires a special kind of stream, IStream (not implemented by System.IO.Stream) and doesn’t directlyunderstand .NET streams. It does provide a number of implementations but not exactly what we need here. We need to output to memory because we’ll want to persist the same bytes to the response stream and to a local file for caching. The memory-bound version of IStream requires a fixed-length buffer but we won’t know the length of the buffer before we resize. To solve that problem, I’ve built a derived class from MemoryStream that also implements IStream. The implementation is not very complicated, it just delegates the IStream methods to the base class, but it involves some native pointer manipulation. Once we have a stream, we need to build the encoder for the output format, which could be anything that WIC supports. For web thumbnails, our only reasonable options are PNG and JPEG. I explored PNG because it’s a lossless format, and because WIC does support PNG compression. That compression is not very efficient though and JPEG offers good quality with much smaller file sizes. On the web, it matters. I found the best PNG compression option (adaptive) to give files that are about twice as big as 100%-quality JPEG (an absurd setting), 4.5 times bigger than 95%-quality JPEG and 7 times larger than 85%-quality JPEG, which is more than acceptable quality. As a consequence, we’ll use JPEG. The JPEG encoder can be prepared as follows: var encoder = factory.CreateEncoder( Consts.GUID_ContainerFormatJpeg, null); encoder.Initialize(outputStream, WICBitmapEncoderCacheOption.WICBitmapEncoderNoCache); The next operation is to create the output frame: IWICBitmapFrameEncode outputFrame; var arg = new IPropertyBag2[1]; encoder.CreateNewFrame(out outputFrame, arg); Notice that we are passing in a property bag. This is where we’re going to specify our only parameter for encoding, the JPEG quality setting: var propBag = arg[0]; var propertyBagOption = new PROPBAG2[1]; propertyBagOption[0].pstrName = "ImageQuality"; propBag.Write(1, propertyBagOption, new object[] { 0.85F }); outputFrame.Initialize(propBag); We can then set the resolution for the thumbnail to be 96, something we weren’t able to do with WPF and had to hack around: outputFrame.SetResolution(96, 96); Next, we set the size of the output frame and create a scaler from the input frame and the computed dimensions of the target thumbnail: outputFrame.SetSize(thumbWidth, thumbHeight); var scaler = factory.CreateBitmapScaler(); scaler.Initialize(frame, thumbWidth, thumbHeight, WICBitmapInterpolationMode.WICBitmapInterpolationModeFant); The scaler is using the Fant method, which I think is the best looking one even if it seems a little softer than cubic (zoomed here to better show the defects): Cubic Fant Linear Nearest neighbor We can write the source image to the output frame through the scaler: outputFrame.WriteSource(scaler, new WICRect { X = 0, Y = 0, Width = (int)thumbWidth, Height = (int)thumbHeight }); And finally we commit the pipeline that we built and get the byte array for the thumbnail out of our memory stream: outputFrame.Commit(); encoder.Commit(); var outputArray = outputStream.ToArray(); outputStream.Close(); That byte array can then be sent to the output stream and to the cache file. Once we’ve gone through this exercise, it’s only natural to wonder whether it was worth the trouble. I ran this method, as well as GDI and WPF resizing over thirty twelve megapixel images for JPEG qualities between 70% and 100% and measured the file size and time to resize. Here are the results: Size of resized images   Time to resize thirty 12 megapixel images Not much to see on the size graph: sizes from WPF and WIC are equivalent, which is hardly surprising as WPF calls into WIC. There is just an anomaly for 75% for WPF that I noted in my previous article and that disappears when using WIC directly. But overall, using WPF or WIC over GDI represents a slight win in file size. The time to resize is more interesting. WPF and WIC get similar times although WIC seems to always be a little faster. Not surprising considering WPF is using WIC. The margin of error on this results is probably fairly close to the time difference. As we already knew, the time to resize does not depend on the quality level, only the size does. This means that the only decision you have to make here is size versus visual quality. This third approach to server-side image resizing on ASP.NET seems to converge on the fastest possible one. We have marginally better performance than WPF, but with some additional peace of mind that this approach is sanctioned for server-side usage by the Windows Imaging team. It still doesn’t work in medium trust. That is a problem and shows the way for future server-friendly managed wrappers around WIC. The sample code for this article can be downloaded from: http://weblogs.asp.net/blogs/bleroy/Samples/WicResize.zip The benchmark code can be found here (you’ll need to add your own images to the Images directory and then add those to the project, with content and copy if newer in the properties of the files in the solution explorer): http://weblogs.asp.net/blogs/bleroy/Samples/WicWpfGdiImageResizeBenchmark.zip WIC tools can be downloaded from: http://code.msdn.microsoft.com/wictools To conclude, here are some of the resized thumbnails at 85% fant:

    Read the article

  • Metro: Understanding Observables

    - by Stephen.Walther
    The goal of this blog entry is to describe how the Observer Pattern is implemented in the WinJS library. You learn how to create observable objects which trigger notifications automatically when their properties are changed. Observables enable you to keep your user interface and your application data in sync. For example, by taking advantage of observables, you can update your user interface automatically whenever the properties of a product change. Observables are the foundation of declarative binding in the WinJS library. The WinJS library is not the first JavaScript library to include support for observables. For example, both the KnockoutJS library and the Microsoft Ajax Library (now part of the Ajax Control Toolkit) support observables. Creating an Observable Imagine that I have created a product object like this: var product = { name: "Milk", description: "Something to drink", price: 12.33 }; Nothing very exciting about this product. It has three properties named name, description, and price. Now, imagine that I want to be notified automatically whenever any of these properties are changed. In that case, I can create an observable product from my product object like this: var observableProduct = WinJS.Binding.as(product); This line of code creates a new JavaScript object named observableProduct from the existing JavaScript object named product. This new object also has a name, description, and price property. However, unlike the properties of the original product object, the properties of the observable product object trigger notifications when the properties are changed. Each of the properties of the new observable product object has been changed into accessor properties which have both a getter and a setter. For example, the observable product price property looks something like this: price: { get: function () { return this.getProperty(“price”); } set: function (value) { this.setProperty(“price”, value); } } When you read the price property then the getProperty() method is called and when you set the price property then the setProperty() method is called. The getProperty() and setProperty() methods are methods of the observable product object. The observable product object supports the following methods and properties: · addProperty(name, value) – Adds a new property to an observable and notifies any listeners. · backingData – An object which represents the value of each property. · bind(name, action) – Enables you to execute a function when a property changes. · getProperty(name) – Returns the value of a property using the string name of the property. · notify(name, newValue, oldValue) – A private method which executes each function in the _listeners array. · removeProperty(name) – Removes a property and notifies any listeners. · setProperty(name, value) – Updates a property and notifies any listeners. · unbind(name, action) – Enables you to stop executing a function in response to a property change. · updateProperty(name, value) – Updates a property and notifies any listeners. So when you create an observable, you get a new object with the same properties as an existing object. However, when you modify the properties of an observable object, then you can notify any listeners of the observable that the value of a particular property has changed automatically. Imagine that you change the value of the price property like this: observableProduct.price = 2.99; In that case, the following sequence of events is triggered: 1. The price setter calls the setProperty(“price”, 2.99) method 2. The setProperty() method updates the value of the backingData.price property and calls the notify() method 3. The notify() method executes each function in the collection of listeners associated with the price property Creating Observable Listeners If you want to be notified when a property of an observable object is changed, then you need to register a listener. You register a listener by using the bind() method like this: (function () { "use strict"; var app = WinJS.Application; app.onactivated = function (eventObject) { if (eventObject.detail.kind === Windows.ApplicationModel.Activation.ActivationKind.launch) { // Simple product object var product = { name: "Milk", description: "Something to drink", price: 12.33 }; // Create observable product var observableProduct = WinJS.Binding.as(product); // Execute a function when price is changed observableProduct.bind("price", function (newValue) { console.log(newValue); }); // Change the price observableProduct.price = 2.99; } }; app.start(); })(); In the code above, the bind() method is used to associate the price property with a function. When the price property is changed, the function logs the new value of the price property to the Visual Studio JavaScript console. The price property is associated with the function using the following line of code: // Execute a function when price is changed observableProduct.bind("price", function (newValue) { console.log(newValue); }); Coalescing Notifications If you make multiple changes to a property – one change immediately following another – then separate notifications won’t be sent. Instead, any listeners are notified only once. The notifications are coalesced into a single notification. For example, in the following code, the product price property is updated three times. However, only one message is written to the JavaScript console. Only the last value assigned to the price property is written to the JavaScript Console window: // Simple product object var product = { name: "Milk", description: "Something to drink", price: 12.33 }; // Create observable product var observableProduct = WinJS.Binding.as(product); // Execute a function when price is changed observableProduct.bind("price", function (newValue) { console.log(newValue); }); // Change the price observableProduct.price = 3.99; observableProduct.price = 2.99; observableProduct.price = 1.99; Only the last value assigned to price, the value 1.99, appears in the console: If there is a time delay between changes to a property then changes result in different notifications. For example, the following code updates the price property every second: // Simple product object var product = { name: "Milk", description: "Something to drink", price: 12.33 }; // Create observable product var observableProduct = WinJS.Binding.as(product); // Execute a function when price is changed observableProduct.bind("price", function (newValue) { console.log(newValue); }); // Add 1 to price every second window.setInterval(function () { observableProduct.price += 1; }, 1000); In this case, separate notification messages are logged to the JavaScript Console window: If you need to prevent multiple notifications from being coalesced into one then you can take advantage of promises. I discussed WinJS promises in a previous blog entry: http://stephenwalther.com/blog/archive/2012/02/22/windows-web-applications-promises.aspx Because the updateProperty() method returns a promise, you can create different notifications for each change in a property by using the following code: // Change the price observableProduct.updateProperty("price", 3.99) .then(function () { observableProduct.updateProperty("price", 2.99) .then(function () { observableProduct.updateProperty("price", 1.99); }); }); In this case, even though the price is immediately changed from 3.99 to 2.99 to 1.99, separate notifications for each new value of the price property are sent. Bypassing Notifications Normally, if a property of an observable object has listeners and you change the property then the listeners are notified. However, there are certain situations in which you might want to bypass notification. In other words, you might need to change a property value silently without triggering any functions registered for notification. If you want to change a property without triggering notifications then you should change the property by using the backingData property. The following code illustrates how you can change the price property silently: // Simple product object var product = { name: "Milk", description: "Something to drink", price: 12.33 }; // Create observable product var observableProduct = WinJS.Binding.as(product); // Execute a function when price is changed observableProduct.bind("price", function (newValue) { console.log(newValue); }); // Change the price silently observableProduct.backingData.price = 5.99; console.log(observableProduct.price); // Writes 5.99 The price is changed to the value 5.99 by changing the value of backingData.price. Because the observableProduct.price property is not set directly, any listeners associated with the price property are not notified. When you change the value of a property by using the backingData property, the change in the property happens synchronously. However, when you change the value of an observable property directly, the change is always made asynchronously. Summary The goal of this blog entry was to describe observables. In particular, we discussed how to create observables from existing JavaScript objects and bind functions to observable properties. You also learned how notifications are coalesced (and ways to prevent this coalescing). Finally, we discussed how you can use the backingData property to update an observable property without triggering notifications. In the next blog entry, we’ll see how observables are used with declarative binding to display the values of properties in an HTML document.

    Read the article

  • Converting a generic list into JSON string and then handling it in java script

    - by Jalpesh P. Vadgama
    We all know that JSON (JavaScript Object Notification) is very useful in case of manipulating string on client side with java script and its performance is very good over browsers so let’s create a simple example where convert a Generic List then we will convert this list into JSON string and then we will call this web service from java script and will handle in java script. To do this we need a info class(Type) and for that class we are going to create generic list. Here is code for that I have created simple class with two properties UserId and UserName public class UserInfo { public int UserId { get; set; } public string UserName { get; set; } } Now Let’s create a web service and web method will create a class and then we will convert this with in JSON string with JavaScriptSerializer class. Here is web service class. using System; using System.Collections.Generic; using System.Linq; using System.Web; using System.Web.Services; namespace Experiment.WebService { /// <summary> /// Summary description for WsApplicationUser /// </summary> [WebService(Namespace = "http://tempuri.org/")] [WebServiceBinding(ConformsTo = WsiProfiles.BasicProfile1_1)] [System.ComponentModel.ToolboxItem(false)] // To allow this Web Service to be called from script, using ASP.NET AJAX, uncomment the following line. [System.Web.Script.Services.ScriptService] public class WsApplicationUser : System.Web.Services.WebService { [WebMethod] public string GetUserList() { List<UserInfo> userList = new List<UserInfo>(); for (int i = 1; i <= 5; i++) { UserInfo userInfo = new UserInfo(); userInfo.UserId = i; userInfo.UserName = string.Format("{0}{1}", "J", i.ToString()); userList.Add(userInfo); } System.Web.Script.Serialization.JavaScriptSerializer jSearializer = new System.Web.Script.Serialization.JavaScriptSerializer(); return jSearializer.Serialize(userList); } } } Note: Here you must have this attribute here in web service class ‘[System.Web.Script.Services.ScriptService]’ as this attribute will enable web service to call from client side. Now we have created a web service class let’s create a java script function ‘GetUserList’ which will call web service from JavaScript like following function GetUserList() { Experiment.WebService.WsApplicationUser.GetUserList(ReuqestCompleteCallback, RequestFailedCallback); } After as you can see we have inserted two call back function ReuqestCompleteCallback and RequestFailedCallback which handle errors and result from web service. ReuqestCompleteCallback will handle result of web service and if and error comes then RequestFailedCallback will print the error. Following is code for both function. function ReuqestCompleteCallback(result) { result = eval(result); var divResult = document.getElementById("divUserList"); CreateUserListTable(result); } function RequestFailedCallback(error) { var stackTrace = error.get_stackTrace(); var message = error.get_message(); var statusCode = error.get_statusCode(); var exceptionType = error.get_exceptionType(); var timedout = error.get_timedOut(); // Display the error. var divResult = document.getElementById("divUserList"); divResult.innerHTML = "Stack Trace: " + stackTrace + "<br/>" + "Service Error: " + message + "<br/>" + "Status Code: " + statusCode + "<br/>" + "Exception Type: " + exceptionType + "<br/>" + "Timedout: " + timedout; } Here in above there is a function called you can see that we have use ‘eval’ function which parse string in enumerable form. Then we are calling a function call ‘CreateUserListTable’ which will create a table string and paste string in the a div. Here is code for that function. function CreateUserListTable(userList) { var tablestring = '<table ><tr><td>UsreID</td><td>UserName</td></tr>'; for (var i = 0, len = userList.length; i < len; ++i) { tablestring=tablestring + "<tr>"; tablestring=tablestring + "<td>" + userList[i].UserId + "</td>"; tablestring=tablestring + "<td>" + userList[i].UserName + "</td>"; tablestring=tablestring + "</tr>"; } tablestring = tablestring + "</table>"; var divResult = document.getElementById("divUserList"); divResult.innerHTML = tablestring; } Now let’s create div which will have all html that is generated from this function. Here is code of my web page. We also need to add a script reference to enable web service from client side. Here is all HTML code we have. <form id="form1" runat="server"> <asp:ScriptManager ID="myScirptManger" runat="Server"> <Services> <asp:ServiceReference Path="~/WebService/WsApplicationUser.asmx" /> </Services> </asp:ScriptManager> <div id="divUserList"> </div> </form> Now as we have not defined where we are going to call ‘GetUserList’ function so let’s call this function on windows onload event of javascript like following. window.onload=GetUserList(); That’s it. Now let’s run it on browser to see whether it’s work or not and here is the output in browser as expected. That’s it. This was very basic example but you can crate your own JavaScript enabled grid from this and you can see possibilities are unlimited here. Stay tuned for more.. Happy programming.. Technorati Tags: JSON,Javascript,ASP.NET,WebService

    Read the article

  • C#/.NET Little Wonders: Using &lsquo;default&rsquo; to Get Default Values

    - by James Michael Hare
    Once again, in this series of posts I look at the parts of the .NET Framework that may seem trivial, but can help improve your code by making it easier to write and maintain. The index of all my past little wonders posts can be found here. Today’s little wonder is another of those small items that can help a lot in certain situations, especially when writing generics.  In particular, it is useful in determining what the default value of a given type would be. The Problem: what’s the default value for a generic type? There comes a time when you’re writing generic code where you may want to set an item of a given generic type.  Seems simple enough, right?  We’ll let’s see! Let’s say we want to query a Dictionary<TKey, TValue> for a given key and get back the value, but if the key doesn’t exist, we’d like a default value instead of throwing an exception. So, for example, we might have a the following dictionary defined: 1: var lookup = new Dictionary<int, string> 2: { 3: { 1, "Apple" }, 4: { 2, "Orange" }, 5: { 3, "Banana" }, 6: { 4, "Pear" }, 7: { 9, "Peach" } 8: }; And using those definitions, perhaps we want to do something like this: 1: // assume a default 2: string value = "Unknown"; 3:  4: // if the item exists in dictionary, get its value 5: if (lookup.ContainsKey(5)) 6: { 7: value = lookup[5]; 8: } But that’s inefficient, because then we’re double-hashing (once for ContainsKey() and once for the indexer).  Well, to avoid the double-hashing, we could use TryGetValue() instead: 1: string value; 2:  3: // if key exists, value will be put in value, if not default it 4: if (!lookup.TryGetValue(5, out value)) 5: { 6: value = "Unknown"; 7: } But the “flow” of using of TryGetValue() can get clunky at times when you just want to assign either the value or a default to a variable.  Essentially it’s 3-ish lines (depending on formatting) for 1 assignment.  So perhaps instead we’d like to write an extension method to support a cleaner interface that will return a default if the item isn’t found: 1: public static class DictionaryExtensions 2: { 3: public static TValue GetValueOrDefault<TKey, TValue>(this Dictionary<TKey, TValue> dict, 4: TKey key, TValue defaultIfNotFound) 5: { 6: TValue value; 7:  8: // value will be the result or the default for TValue 9: if (!dict.TryGetValue(key, out value)) 10: { 11: value = defaultIfNotFound; 12: } 13:  14: return value; 15: } 16: } 17:  So this creates an extension method on Dictionary<TKey, TValue> that will attempt to get a value using the given key, and will return the defaultIfNotFound as a stand-in if the key does not exist. This code compiles, fine, but what if we would like to go one step further and allow them to specify a default if not found, or accept the default for the type?  Obviously, we could overload the method to take the default or not, but that would be duplicated code and a bit heavy for just specifying a default.  It seems reasonable that we could set the not found value to be either the default for the type, or the specified value. So what if we defaulted the type to null? 1: public static TValue GetValueOrDefault<TKey, TValue>(this Dictionary<TKey, TValue> dict, 2: TKey key, TValue defaultIfNotFound = null) // ... No, this won’t work, because only reference types (and Nullable<T> wrapped types due to syntactical sugar) can be assigned to null.  So what about a calling parameterless constructor? 1: public static TValue GetValueOrDefault<TKey, TValue>(this Dictionary<TKey, TValue> dict, 2: TKey key, TValue defaultIfNotFound = new TValue()) // ... No, this won’t work either for several reasons.  First, we’d expect a reference type to return null, not an “empty” instance.  Secondly, not all reference types have a parameter-less constructor (string for example does not).  And finally, a constructor cannot be determined at compile-time, while default values can. The Solution: default(T) – returns the default value for type T Many of us know the default keyword for its uses in switch statements as the default case.  But it has another use as well: it can return us the default value for a given type.  And since it generates the same defaults that default field initialization uses, it can be determined at compile-time as well. For example: 1: var x = default(int); // x is 0 2:  3: var y = default(bool); // y is false 4:  5: var z = default(string); // z is null 6:  7: var t = default(TimeSpan); // t is a TimeSpan with Ticks == 0 8:  9: var n = default(int?); // n is a Nullable<int> with HasValue == false Notice that for numeric types the default is 0, and for reference types the default is null.  In addition, for struct types, the value is a default-constructed struct – which simply means a struct where every field has their default value (hence 0 Ticks for TimeSpan, etc.). So using this, we could modify our code to this: 1: public static class DictionaryExtensions 2: { 3: public static TValue GetValueOrDefault<TKey, TValue>(this Dictionary<TKey, TValue> dict, 4: TKey key, TValue defaultIfNotFound = default(TValue)) 5: { 6: TValue value; 7:  8: // value will be the result or the default for TValue 9: if (!dict.TryGetValue(key, out value)) 10: { 11: value = defaultIfNotFound; 12: } 13:  14: return value; 15: } 16: } Now, if defaultIfNotFound is unspecified, it will use default(TValue) which will be the default value for whatever value type the dictionary holds.  So let’s consider how we could use this: 1: lookup.GetValueOrDefault(1); // returns “Apple” 2:  3: lookup.GetValueOrDefault(5); // returns null 4:  5: lookup.GetValueOrDefault(5, “Unknown”); // returns “Unknown” 6:  Again, do not confuse a parameter-less constructor with the default value for a type.  Remember that the default value for any type is the compile-time default for any instance of that type (0 for numeric, false for bool, null for reference types, and struct will all default fields for struct).  Consider the difference: 1: // both zero 2: int i1 = default(int); 3: int i2 = new int(); 4:  5: // both “zeroed” structs 6: var dt1 = default(DateTime); 7: var dt2 = new DateTime(); 8:  9: // sb1 is null, sb2 is an “empty” string builder 10: var sb1 = default(StringBuilder()); 11: var sb2 = new StringBuilder(); So in the above code, notice that the value types all resolve the same whether using default or parameter-less construction.  This is because a value type is never null (even Nullable<T> wrapped types are never “null” in a reference sense), they will just by default contain fields with all default values. However, for reference types, the default is null and not a constructed instance.  Also it should be noted that not all classes have parameter-less constructors (string, for instance, doesn’t have one – and doesn’t need one). Summary Whenever you need to get the default value for a type, especially a generic type, consider using the default keyword.  This handy word will give you the default value for the given type at compile-time, which can then be used for initialization, optional parameters, etc. Technorati Tags: C#,CSharp,.NET,Little Wonders,default

    Read the article

< Previous Page | 46 47 48 49 50 51 52 53 54 55 56 57  | Next Page >