Search Results

Search found 41511 results on 1661 pages for 'via point'.

Page 50/1661 | < Previous Page | 46 47 48 49 50 51 52 53 54 55 56 57  | Next Page >

• "The directory name is invalid" when trying to install drivers in Windows 7 via Device Manager

  - by Luke

  First off, this computer is not mine, it's a customer's system. Having said that... The hard drive was moved to a new motherboard, CPU, RAM combo, and booted up fine. Customer puts in driver CD, drivers won't load. He brings it into me. Under Device Manager for Windows 7 x64, I see lots of PCI to PCI bridge, one SMBus Controller, and about 20 Unknown Devices. Greeeeeat... So I start with the SMBus driver directly from the Asus website for the motherboard (P8H77-M Pro). If I install from the setup program, it tells me to reboot, then it starts the install. It gets half way through the setup, then fails (An unknown error occurred. Setup will exit). When I try to point to the folder from Device Manager, it starts copying files for the driver, even presents me with the proper name of the device, but says that an error has occurred there as well: The directory name is invalid. Doing some Googling, I saw that many people had this issue with Vista. K, Vista and 7 are similar, maybe the solutions are the same... But they aren't. I tried: Copying the entire driver folder and setup utility to the Program Files folder and running it / selecting it in DM Downloading another set of drivers in case this one is corrupt Disabling UAC Deleting and recreating the %WINDIR%\TEMP folder Removing all references to previous hardware that I could find, even in Device Manager's hidden mode So far, nothing has worked. A wipe and reload will be out of the question

  Read the article

• Windows 7 64bits installation via USB asks for drivers

  - by Shikiryu

  I just bought a new config ( ASUS p8z68-v lx, i5-2500k + ram and new graphic card ). Coming back and installing it in my old computer, I just saw that my DVD player was on IDE (yup…). So, I needed to install windows 7 64bits from my usb key. Fine, I made my usb key bootable and copy the official DVD on it (the same version that was on my old computer), set BIOS to boot on it first and started the computer up. It worked fine until it asks me for cd/dvd drivers (which is funny since, I do it via USB because I can't plug in my DVD player :D) I have 3 SATA HDD plugged in and that's it. I made a small google search and found that it could be SATA or RAID drivers. Fine, I took another USB KEY and put all my motherboard drivers on it (from the CD sold with the MB) and none of those drivers seemed to work. I tried downloading new drivers from ASUS website and same effect. Any idea but no "buy a new DVD player", I'm now broke for the month :) ?

  Read the article

• 500 error with deploying rails application via apache2+passenger

  - by user1633983

  I finally completed my own app, so the only work left is deploying the app. I'm using Ubuntu 10.04 and apache2(installed by apt-get), so I'm trying to deploy through passenger. I installed passenger gem like this: sudo gem install passenger rvmsudo passenger-install-apache2-module and I configured apache settings as what the installation message says. I added below lines in the middle of /etc/apache2/apache2.conf file. LoadModule passenger_module /home/admin/.rvm/gems/ruby-1.9.3-p194/gems/passenger-3.0.17/ext/apache2/mod_passenger.so PassengerRoot /home/admin/.rvm/gems/ruby-1.9.3-p194/gems/passenger-3.0.17 PassengerRuby /home/admin/.rvm/wrappers/ruby-1.9.3-p194/ruby and, I appended below lines in /etc/apache2/sites-available/default file. <VirtualHost *:80> ServerName localhost # !!! Be sure to point DocumentRoot to 'public'! DocumentRoot /home/admin/homepage/public <Directory /home/admin/homepage/public> # This relaxes Apache security settings. AllowOverride all # MultiViews must be turned off. Options -MultiViews </Directory> But when I restart the apache service and hit the address, 500 error occurs. At first, it was same 500 error but the 500 error page is from apache's, but when I reinstalled the libapache2-module-passenger, the 500 error page is changed to that from rails'. Because of rails' 500 error page(which is located at public/500.html), I think passenger module is properly connected with apache. What should I do to fix this problem? Do I need to configure something inside my app before deployment?

  Read the article

• Linking to a chat room via XMPP: URI

  - by Coderer

  I found out how to link directly to a chat room on a Jabber conference server -- it took a bit of digging, and I wound up actually looking at the spec before I was sure I was doing it right. I confirmed here, so I'm pretty sure I've got it. The results, though, are puzzling. If I click a link of the style xmpp:[email protected] I get a new chat session with user "dude" at example.com, as expected. If I tack on a nonsense query (xmpp:[email protected]?foobar), it's ignored, which is what the spec says should happen. However, if I use xmpp:[email protected]?join, as in the link above, nothing happens. I dug a little deeper, and found out that on my (Linux) system, xmpp URIs are handled via purple-url-handler, so I dropped to a terminal and ran it manually. The result was that any xmpp URI ran fine except one that includes a ?join query. The ?join query results in a dbus crash, pointing specifically to line 2356 of dbus-message.c -- a little Googling suggests this probably is dbus's less-than-elegant way of telling me that somebody is using dbus incorrectly. Am I crafting my link correctly? Is this an OS or maybe application issue? Does this work on other platforms / browsers / etc? More importantly, is there any easy way to fix it?

  Read the article

• Laptop authentication/logon via accelerometer tilt, flip, and twist

  - by wonsungi

  Looking for another application/technology: A number of years ago, I read about a novel way to authenticate and log on to a laptop. The user simply had to hold the laptop in the air and execute a simple series of tilts and flips to the laptop. By logging accelerometer data, this creates a unique signature for the user. Even if an attacker watched and repeated the exact same motions, the attacker could not replicate the user's movements closely enough. I am looking for information about this technology again, but I can't find anything. It may have been an actual feature on a laptop, or it may have just been a research project. I think I read about it in a magazine like Wired. Does anyone have more information about authentication via unique accelerometer signatures? Here are the closest articles I have been able to find: Knock-based commands for your Linux laptop Shake Well Before Use: Authentication Based on Accelerometer Data[PDF] Inferring Identity using Accelerometers in Television Remote Controls User Evaluation of Lightweight User Authentication with a Single Tri-Axis Accelerometer Identifying Users of Portable Devices from Gait Pattern with Accelerometers[PDF] 3D Signature Biometrics Using Curvature Moments[PDF] MoViSign: A novel authentication mechanism using mobile virtual signatures

  Read the article

• Have an Input/output error when connecting to a server via ssh

  - by Shehzad009

  Hello I seem to be having a problem while connecting to a Ubuntu Server while connecting via ssh. When I login, I get this error. Could not chdir to home directory /home/username: Input/output error It seems like my home folder is corrupt or something. I cannot ls in the home folder directory, and in my usename directory, I can't cd into this. As root I cannot ls in the home directory as well or in any directory in Home. I notice as well when I save in vim or quit, it get this error at the bottom of the page E138: Cannot write viminfo file /home/root/.viminfo! Any ideas? EDIT: this is what happens if I type in these commands mount proc on /proc type proc (rw,noexec,nosuid,nodev) none on /sys type sysfs (rw,noexec,nosuid,nodev) fusectl on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) none on /dev type devtmpfs (rw,mode=0755) none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) none on /dev/shm type tmpfs (rw,nosuid,nodev) none on /var/run type tmpfs (rw,nosuid,mode=0755) none on /var/lock type tmpfs (rw,noexec,nosuid,nodev) /dev/mapper/RAID1-lvvar on /var type xfs (rw) /dev/mapper/RAID5-lvsrv on /srv type xfs (rw) /dev/mapper/RAID5-lvhome on /home type xfs (rw) /dev/mapper/RAID1-lvtmp on /tmp type reiserfs (rw) dmesg | tail [1213273.364040] Filesystem "dm-3": xfs_log_force: error 5 returned. [1213274.084081] Filesystem "dm-4": xfs_log_force: error 5 returned. [1213309.364038] Filesystem "dm-3": xfs_log_force: error 5 returned. [1213310.084041] Filesystem "dm-4": xfs_log_force: error 5 returned. [1213345.364039] Filesystem "dm-3": xfs_log_force: error 5 returned. [1213346.084042] Filesystem "dm-4": xfs_log_force: error 5 returned. [1213381.365036] Filesystem "dm-3": xfs_log_force: error 5 returned. [1213382.084047] Filesystem "dm-4": xfs_log_force: error 5 returned. [1213417.364039] Filesystem "dm-3": xfs_log_force: error 5 returned. [1213418.084063] Filesystem "dm-4": xfs_log_force: error 5 returned. fdisk -l /dev/sda Cannot open /dev/sda

  Read the article

• Setup Entourage for Exchange via HTTP communication

  - by Johandk

  Our ISP set up a hosted exchange server for all our mail. I've setup all our Outlook users with no problems. We have two people using Mac OSX Leopard and Entourage. Entourage has the option of adding an Exchange account, but I have no idea how to tell it to connect to exchange via HTTP. Heres an excerpt from the client setup docs the hosting company sent me for Outlook: 1 .Go to control panel 2. Select ‘Mail’ 3. Select ‘Email accounts’ Under the E-mail tab select ‘New’ Select ‘Manually configure server settings......’ - click next Select ‘Microsoft Exchange’ – click next Complete details as below with Microsoft Exchange Server as: [server address] Do not select ‘Check Name’. Instead select ‘More Settings’. Go to the Connection tab, and select the bottom option ‘Connect to Microsoft Exchange using HTTP’. And then select the ‘Exchange Proxy Settings’ button. Enter Proxy server for Exchange Check Only connect to proxy servers that have this principal name in their certificate, Enter msstd:[servername] Proxy Authentication - select Basic Authentication Select OK, and again, so that you return to the main screen. Now select ‘Check Name’. Enter Username and Password: The username should now be the full name and underlined. If so select next, and then finish. Next time you open Outlook, enter username and password Any help GREATLY appreciated.

  Read the article

• ssh use with netcat to forward connections via bastion host to inside machine

  - by Registered User

  Hi, I am having a server in a corporate data centre who's sys admin is me. There are some virtual machines running on it.The main server is accessible from internet via SSH. There are some people who within the lan access the virtual machines whose IPs on LAN are 192.168.1.1 192.168.1.2 192.168.1.3 192.168.1.4 the main machine which is a bastion host for internet has IP 192.168.1.50 and only I have access to it. I have to give people on internet the access to the internal machines whose IP I mentioned above.I know tunnel is a good way but the people are fairly non technical and do not want to get into a tunnel etc jargons.So I came across a solution as explained on this link On the gateway machine which is 192.168.1.50 in the .ssh/config file I add following Host securehost.example.com ProxyCommand ssh [email protected] nc %h %p Now my question is do I need to create separate accounts on the bastion host (gateway) to those users who can SSH to the inside machines and in each of the users .ssh/config I need to make the above entry or where exactly I put the .ssh/config on the gateway. Also ssh [email protected] where user1 exists only on inside machine 192.168.1.1 and not on the gateway is that right syntax? Because the internal machines are accessilbe to outside world as site1.example.com site2.example.com site3.example.com site4.example.com But SSH is only for example.com and only one user.So How should I go for .ssh/config 1) What is the correct syntax for ProxyCommand on gateway's .ssh/config should I use ProxyCommand ssh [email protected] nc %h %p or I should use ProxyCommand ssh [email protected] in nc %h %p 2) Should I create new user accounts on gateway or adding them in AllowedUsers on ssh_config is sufficient?

  Read the article

• Launching Installer Via Powershell and WinRM and Nothing Happens

  - by Nick DeMayo

  I'm currently working on a Powershell script to run some Microsoft Hotfix installers remotely on several Windows Server 2008 R2 servers that I manage. Basically, the script copies all the appropriate files up to the server, and then runs the installer via Invoke-Command, like so: function InstallCU { Write-Host "Installing June 2013 CU..." Invoke-Command -ComputerName $ServerName -ScriptBlock { Start-Process "c:\aaa\prjcusp2\ubersrvprj2010-kb2817530-fullfile-x64-glb.exe" -ArgumentList "/passive" } } If I run the "Start-Process" command locally on the server, the installer runs properly. However, when trying to run it remotely, nothing happens (actually, I can see the installer start up in Task Manager, but it closes a couple seconds later and doesn't run). I've attempted giving the Invoke-Command -Credentials, I've turned off UAC on the server, and I've ensured that my WinRM settings (running 'winrm quickconfig' and setting TrustedHosts to *) are correct. I've also tried having the Invoke-Command script run a local Powershell script to run the installer and changing the Argument from '/passive' to 'quiet' (in case it can't remotely launch something that has a UI), but again, no dice. Is there anything else I can try, or am I just not going to be able to do this?

  Read the article

• Route all traffic via OpenVPN client

  - by Ilya

  I've got OpenVPN client running on 192.168.0.3. What I'd like to do is route all the traffic from the second computer with 192.168.0.100 via OpenVPN client that's running on the first computer. My router ip is 192.168.0.1 Network topology: Windows computer with OpenVPN client: 192.168.0.3 Windows computer whose traffic has to be rerouted: 192.168.0.100 Router: 192.168.0.1 I want it to work in the following way: 192.168.0.100 computer => 192.168.0.3 computer => OpenVPN => 192.168.0.1 How can I achieve that by only modifying windows' routing table? I've tried entering the following into windows shell(on computer without VPN), which didn't work (it just dropped my internet connection): route delete 0.0.0.0 mask 255.255.255.255 192.168.0.1 route add 0.0.0.0 mask 255.255.255.255 192.168.0.3 Should I also setup the computer that has OpenVPN client running? Does it have anything to do with windows tcp forwarding? Thanks!

  Read the article

• eXist-db: can't start webstart client on a closed port, reverse proxied via apache

  - by rvdb

  I am configuring an Apache HTTP server so it reverse proxies requests starting with /app/ to an eXist-db instance running in a Tomcat server, on port 8082. This port has been closed in the firewall and is inaccessible to the outer world. Following the eXist documentation, I have following rules in place in my httpd.conf file: ProxyPass /apps/ http://localhost:8082/ ProxyPassReverse /apps/ http://localhost:8082/ ProxyPassReverseCookiePath /apps/ / All goes well for requests to e.g. 'http://mydomain/apps/exist/index.xml'. Yet, the webstart client (accessible at 'http://localhost:8082/exist/webstart/exist.jnlp' on the web server) doesn't work behind the proxy. While 'http://mydomain/apps/exist/webstart/exist.jnlp' does generate a valid exist.jnlp file, that file can't be executed. The reason seems quite obvious: apparently, the eXist-db instance generating the exist.jnlp file only sees the proxied request as: 'http://localhost:8082/exist/webstart/exist.jnlp'. Yet, since the exist.jnlp file is executed on the client, that reference is meaningless (unless the client computer happens to have an eXist-db instance running on that port). Executing the exist.jnlp file hence fails with a 'connection refused' error. Yet, there's no problem at all connecting a local eXist-db Java client to the proxied eXist instance with the URL xmldb:exist://mydomain/apps/exist/xmlrpc. The problem lies in generating the webstart exist.jnlp file, which seems to need access to a publicly accessible URL. However, opening port 8082 and replacing the Proxy references to 'http://localhost:8082' with 'http://mydomain:8082' IMO rather destroys the point of reverse proxying. Do others have had success reverse proxying eXist-db on a closed port behind Apache? Are there perhaps some Proxy configuration settings I have overlooked (I'm no expert at all) that can make eXist see the original request instead of the proxied one? Kind regards, Ron

  Read the article

• Apache + PHP via FastCGI

  - by Wilco

  I'm running into some problems while attempting to run PHP via FastCGI in Apache. I have the FastCGI module loaded, but get the following error when attempting to load a page: The requested URL /fastcgi/php54.fcgi/index.php was not found on this server. Somewhere, it seems that the script to be executed is appended to the executable without any spaces. Is this where the problem likely is? Below I've included snippets from my Apache configuration (hopefully this is enough): LoadModule fastcgi_module libexec/apache2/mod_fastcgi.so FastCgiIpcDir /var/run/fastcgi AddHandler fastcgi-script .fcgi FastCgiConfig -autoUpdate -singleThreshold 100 -killInterval 300 AddType application/x-httpd-php .php ScriptAlias /fastcgi/ /Library/WebServer/FCGI-Executables/ <Directory "/Library/WebServer/FCGI-Executables"> Options +ExecCGI SetHandler fastcgi-script Order allow,deny Allow from all <VirtualHost *:80> ServerName www.somedomain.com ServerAdmin [email protected] DocumentRoot "/Web/www.somedomain.com" DirectoryIndex index.html index.php default.html CustomLog /var/log/apache2/access_log combinedvhost ErrorLog /var/log/apache2/error_log Action application/x-httpd-php /fastcgi/php54.fcgi <IfModule mod_ssl.c> SSLEngine Off SSLCipherSuite "ALL:!aNULL:!ADH:!eNULL:!LOW:!EXP:RC4+RSA:+HIGH:+MEDIUM" SSLProtocol -ALL +SSLv3 +TLSv1 SSLProxyEngine On SSLProxyProtocol -ALL +SSLv3 +TLSv1 </IfModule> <Directory "/Web/www.somedomain.com"> Options All -Indexes +ExecCGI +Includes +MultiViews AllowOverride All <IfModule mod_dav.c> DAV Off </IfModule> <IfDefine !WEBSERVICE_ON> Deny from all ErrorDocument 403 /customerror/websitesoff403.html </IfDefine> </Directory> </VirtualHost> ... and this is the executable: #!/bin/sh PHP_FCGI_CHILDREN=1 PHP_FCGI_MAX_REQUESTS=5000 export PHP_FCGI_CHILDREN export PHP_FCGI_MAX_REQUESTS exec /opt/local/bin/php-cgi54

  Read the article

• Connecting a network printer via a Thecus N2100 - works in Vista, not in Windows 7

  - by Jon Skeet

  I have a Lexmark E250d printer attached to a Thecus N2100 NAS. On Windows Vista I've managed to configure this using an "Internet" printer port with the URL of http://thecus:631/printers/usb-printer. I can add a printer in a similar way in Windows 7, but it never manages to print the test page. If I go to "Configure Port" in Vista, it just has "Security Options" - on Windows 7 it's asking about Raw mode vs LPR mode etc. On Vista I'm using an E250d-specific driver from Lexmark; on Windows 7 there's a Microsoft E250d driver, or a Universal PCL XL driver from Lexmark... I wouldn't expect this different to be related to the problem, but I thought I'd mention it anyway. (Lexmark doesn't have a Windows 7 E250d-specific driver as far as I can see.) Any suggestions? I was thinking of upgrading my main laptop from Vista to Windows 7, but I'd really like to get this sorted first... EDIT: If I connect to http://thecus:631/printers/usb-printer via Chrome while capturing with Wireshark, I get this response: HTTP/1.1 200 OK Date: Wed, 06 Jan 2010 16:47:23 GMT Connection: Keep-Alive Keep-Alive: timeout=60 Content-Language: C Transfer-Encoding: chunked Content-Type: text/html;charset=iso-8859-1 0 No idea what that's meant to be doing... EDIT: On further consultation, this would appear to be the Internet Printing Protocol which is layered on HTTP. Printing a test page successfully from Vista posts to that URL. Will attempt the same on Windows 7...

  Read the article

• SATA Blu-Ray drive not detected via USB adapter

  - by LTR

  I'm using an SATA blu-ray drive (Lite-On IHOS104), connected via a USB adapter to my Windows 7 (32-bit) notebook. The first time I plugged the adapter in, it worked perfectly. The drive appeared in Explorer, and my player software was able to play an encrypted Blu-Ray disc just fine. After the first reboot, it never worked again. Now it shows up as "removable media" with a size of 0 bytes, irregardless of whether a disk is inserted or not. The drive does not show up under the green "eject USB device" icon in the taskbar. The adapter is powered using a separate power adapter. I have tried: disconnecting all other USB devices testing with a DVD instead of a Blu-Ray disc letting Windows search for updated drivers for the drive - there are none using the same drive and adapter on another Win7 (but x64) computer. They work perfectly. using other USB ports on the same notebook - tried them all. using a different SATA/USB-adapter What else can I do to diagnose this problem?

  Read the article

• dovecot/postfix: can send & receive via webmin, however squirrel mail and outlook fail to connect

  - by Jonathan

  I have just finished setting up dovecot and postfix on my server (centos 5.5/apache) earlier today. So far I've been able to get email working through webmin (can send/receive to and from external domains). However, attempting to telnet xxx.xxx.xx.xxx 110 returns the following errors: Connected to xxx.xxx.xx.xxx. Escape character is '^]'. +OK Dovecot ready. USER mailtest +OK PASS ********* +OK Logged in. -ERR [IN-USE] Couldn't open INBOX: Internal error occurred. Refer to server log for more information. [2011-02-11 22:55:48] Connection closed by foreign host. Which further logs the following error dovecot: Feb 11 21:32:48 Info: pop3-login: Login: user=, method=PLAIN, rip=::ffff:xxx.xxx.xx.xxx, lip=::ffff:xxx.xxx.xx.xxx, TLS dovecot: Feb 11 21:32:48 Error: POP3(mailtest): stat(/home/mailtest/MailDir/cur) failed: Permission denied dovecot: Feb 11 21:32:48 Error: POP3(mailtest): stat(/home/mailtest/MailDir/cur) failed: Permission denied dovecot: Feb 11 21:32:48 Error: POP3(mailtest): Couldn't open INBOX: Internal error occurred. Refer to server log for more information. [2011-02-11 21:32:48] dovecot: Feb 11 21:32:48 Info: POP3(mailtest): Couldn't open INBOX top=0/0, retr=0/0, del=0/0, size=0 Also, when attempting to login to squirrelmail or access the account via thunderbird/live mail etc, it obviously fails with a similar issue. Any suggestions or outside thinking on this would be a massive help! I've pretty much exhausted every resource, and tried every suggestion for my dovecot.conf file, but so far nothing seems to work :( I feel like it may be a permissions/ownership issue, but i'm lost as to specifics.

  Read the article

• Loopback connection via PHP's getimage size crashes server (Magento's CMS)

  - by Alex

  We were able to trace down a problem that is crashing our NGINX server running Magento until the following point: Background info: Magento Backend has a CMS function with a WYSIWYG editor. This editor loads some pictures via a controller in magento (cms/directive). When we set the NGINX error_log level to info, we get the following lines (line break inserted for better readability): 2012/10/22 18:05:40 [info] 14105#0: *1 client closed prematurely connection, so upstream connection is closed too while sending request to upstream, client: XXXXXXXXX, server: test.local, request: "GET index.php/admin/cms_wysiwyg/directive/___directive/BASEENCODEDIMAGEURL,,/ HTTP/1.1", upstream: "fastcgi://127.0.0.1:9024", host: "test.local" When checking the code in the debugger, the following call does never return (in ´Varien_Image_Adapter_Abstract::getMimeType()` # $this->_fileName is http://test.local/skin/adminhtml/base/default/images/demo-image-not-existing.gif` # $_SERVER['REQUEST_URI'] = http://test.local/admin/cms_wysiwyg/directive/___directive/BASEENCODEDIMAGEURL list($this->_imageSrcWidth, $this->_imageSrcHeight, $this->_fileType, ) = getimagesize($this->_fileName); The filename requests is an URL to the same server which is requesting the script a link to a static .gif that is not existing. Sample URL: http://test.local/skin/adminhtml/base/default/images/demo-image-not-existing.gif When the above line executed, any subsequent request to the NGNIX server does not respond any more. After waiting for around 10 minutes, the NGINX server starts answering requests again. I tried to reproduce the error with a simple test script that only calls getimagesize() with the given URL - but this not crash. It simple leads to an exception saying that the URL could not be loaded (which is fine as the URL is wrong)

  Read the article

• How to connect to Oracle DB via ODBC

  - by Mat

  I am attempting to connect to a remote Oracle DB via ODBC. I am totally inexperienced and fail to connect. What I have installed: Oracle 'ODBC Driver for RDB' A program I want to connect from (Altova Mapforce, an ETL) What I do: Under Administrative tools I open the Windows "ODBC Data Source Administrator I click 'Add..' and select the Oracle ODBC Driver The Window 'Oracle RDB Driver Setup' opens. I fill in: Data source name: free choice Description: I leave blank Transport: I choose TCP/IP Server: I input the IP address of the server Service: I leave 'generic' UserID: I enter the user name (that belongs to the password I have) Attach Statement: no idea what do do here?? Upon choosing 'OK', the 'Oracle RDB ODBC Driver Connect' opens and I am prompted the password. I enter the password and the connection fails. Questions Do I need further programs on my computer, e.g. the Oracle client of Instant client? I am never prompted the port of the server - isn't this relevant? I am never prompted SID - isn't this relevant? I connected from SQL developer easily - it prompted only server IP, port, username, password and SID.

  Read the article

• AWS VPC public web application connecting to database via VPN

  - by Chris

  What I am trying to do is set up a web application that is public facing but makes calls to a database that is on an internal network. I have been trying to set up an AWS VPC with a public subnet, private subnet, and hardware VPN access but I can't seem to get it to work. Can someone help me understand what the process flow here should be? My understanding is that I need a public subnet to handle the website requests and then a private subnet to connect to the VPN but what I do not understand is how to send requests down the chain and get the response. Basically what I am asking is how can I query the database via VPN from that public website? I've tried during rout forwarding but I can't successfully complete the process. Does anyone have any advice on something I can read on this subject or an FAQ on setting something like this up? Is it even possible? I'm out of my league here, this is not my area of expertise but I'm being asked to solve this problem. Any help would be appreciated. Thanks

  Read the article

• Setup Entourage for Exchange via HTTP communication

  - by Johandk

  Our ISP set up a hosted exchange server for all our mail. I've setup all our Outlook users with no problems. We have two people using Mac OSX Leopard and Entourage. Entourage has the option of adding an Exchange account, but I have no idea how to tell it to connect to exchange via HTTP. Heres an excerpt from the client setup docs the hosting company sent me for Outlook: 1 .Go to control panel 2. Select ‘Mail’ 3. Select ‘Email accounts’ Under the E-mail tab select ‘New’ Select ‘Manually configure server settings......’ - click next Select ‘Microsoft Exchange’ – click next Complete details as below with Microsoft Exchange Server as: [server address] Do not select ‘Check Name’. Instead select ‘More Settings’. Go to the Connection tab, and select the bottom option ‘Connect to Microsoft Exchange using HTTP’. And then select the ‘Exchange Proxy Settings’ button. Enter Proxy server for Exchange Check Only connect to proxy servers that have this principal name in their certificate, Enter msstd:[servername] Proxy Authentication - select Basic Authentication Select OK, and again, so that you return to the main screen. Now select ‘Check Name’. Enter Username and Password: The username should now be the full name and underlined. If so select next, and then finish. Next time you open Outlook, enter username and password Any help GREATLY appreciated.

  Read the article

• Connection problems via Wifi (multiple devices)

  - by Kelvin Farrell

  I'm having connection issues with my router (Linksys WRT610N) at home. There are a number of things that are happening (may be more, this is just what I've mainly noticed)... 1) Using my laptop (Macbook Pro OSX Lion), I am unable to complete any operations with my external FTP server, hosted with FatCow. I can connect to it, navigate through all the files, but when I try to edit/delete/add a file the operation times out. EVERY time. I've used two other Wifi connection on my laptop and neither have this issue. 2) I am unable to upload photos/videos to Facebook or Twitter using my phone (Samsung Galaxy S2) or my tablet (HP Touchpad - CM9). Neither am I able to upload files to Dropbox via either of the devices. Same thing happens in all situations; the upload will begin and it will just hang on 0% forever. After about 10 mins I am always forced to disconnect the Wifi to stop the action. 3) My laptop is having slow internet speed, even though we are on 20mb broadband. Speedtests say I'm getting a good connection and my Ping is good, but when using streaming services like Spotify, it takes forever to load a page and frequently stops to buffer whilst playing a song. Don't know if it's worth mentioning but I have no issues with my XBox (Ethernet), AppleTV (Wifi) or my girlfrield's phone (Nokia Lumia 800 - WP7.5) on the network. I'd really appreciate any help. This is driving me insane and is really affecting both my working and leisure use of the internet.

  Read the article

• Windows authentication to SQL Server via IIS and PHP

  - by Jeff

  We're running a PHP 5.4 application on Server 2008 R2. We would like to connect to a SQL Server 2008 database, on a separate server, using Windows authentication (must be Windows authentication--the DB admins won't let us connect any other way). I have downloaded the SQL Server drivers for PHP and installed them. IIS is configured for Windows authentication, and anonymous authentication has been disabled. $_SERVER['AUTH_USER'] reports our currently logged on Windows account. In php.ini, we have set fastcgi.impersonate = 1. When we setup a connection using the following code from Microsoft: $serverName = "sqlserver\sqlserver"; $connectionInfo = array( "Database"=>"some_db"); /* Connect using Windows Authentication. */ $conn = sqlsrv_connect( $serverName, $connectionInfo); if( $conn === false ) { echo "Unable to connect.</br>"; die( print_r( sqlsrv_errors(), true)); } We are presented with the following error message: Unable to connect. Array ( [0] => Array ( [0] => 28000 [SQLSTATE] => 28000 [1] => 18456 [code] => 18456 [2] => [Microsoft][SQL Server Native Client 11.0][SQL Server]Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'. [message] => [Microsoft][SQL Server Native Client 11.0][SQL Server]Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'. ) Is it possible to connect to SQL Server 2008 via PHP using Windows authentication? Are there any additional required settings we need to make on IIS, SQL Server, or any other component (like a domain controller)?

  Read the article

• Can't access one directory via HTTPS + public FQDN

  - by Justin James

  Hello - I have the strangest IIS error that I've ever seen in my life. I have an application/directory on an IIS server, that throws an error 500 when accessing ANY of the content in it, including HTML documents, when accessed via HTTPS AND the machines FQDN. When I access it with "localhost" it works fine. When I added a bogus entry for the NIC's IP in the hosts file, it worked fine. When I access it with the machines name and HTTP it works fine. Here's a chart (the machine's name is "lofn.titaniumcrowbar.com"): http - lofn.titaniumcrowbar.com: works https - lofn.titaniumcrowbar.com: broken https - localhost: works https - temp.titaniumcrowbar.com (put into hosts file): works I set up tracing, and I got some useless information: "The I/O operation has been aborted because of either a thread exit or an application request. (0x800703e3)" This would make sense, except this happens when pulling up static content. While the directory may be an "application", the content is all static in it. Any/all suggestions, no matter how strange, are VERY appreciated. Thanks! J.Ja

  Read the article

• Unable to ping gateway via bridge nic

  - by Ara

  I'm trying to install KVM on Ubuntu 12.04 server. We have multiple nic on this server of which we primarily use eth0. The server network runs fine(i'm able to ping gateway, ping dns server and ping servers on internet) with eth0 /etc/network/interfaces auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 192.168.22.194 netmask 255.255.255.0 network 192.168.22.0 broadcast 192.168.22.255 gateway 192.168.22.1 dns-nameservers 10.71.130.58 10.71.130.60 dns-search test.local I installed bridge-utils and configured br0 as below /etc/network/interfaces auto lo iface lo inet loopback auto eth0 iface eth0 inet manual auto br0 iface br0 inet static address 192.168.22.194 netmask 255.255.255.0 network 192.168.22.0 broadcast 192.168.22.255 gateway 192.168.22.1 dns-nameservers 10.71.130.58 10.71.130.60 dns-search test.local bridge_ports eth0 bridge_fd 9 bridge_hello 2 bridge_maxage 12 bridge_stp off Post which i'm able to ping servers on the same ip range 192.168.22.2-254 except for 192.168.22.1 (which is the gateway) also i'm not able to ping any other servers. I'm not able to ping this machine from network. The output for route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.22.1 0.0.0.0 UG 100 0 0 br0 192.168.22.0 0.0.0.0 255.255.255.0 U 0 0 0 br0 192.168.122.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr0 I've been struggling with this issue for past 5 days, would be of help if anyone can point me in the right direction to fix this issue. Thanks in advance

  Read the article

• How to access a port via OpenVpn only

  - by Andy M

  I've set up an openvpn server alongside an apache website that can only be accessed on port 8100 on the same machine. My /etc/openvpn/server.conf file looks like this: port 1194 proto tcp dev tun ca ./easy-rsa2/keys/ca.crt cert ./easy-rsa2/keys/server.crt key ./easy-rsa2/keys/server.key # This file should be kept secret dh ./easy-rsa2/keys/dh1024.pem # Diffie-Hellman parameter server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt # make sure clients can still connect to the internet push "redirect-gateway def1 bypass-dhcp" keepalive 10 120 comp-lzo persist-key persist-tun status openvpn-status.log verb 3 Now I tried to let only clients connected to the vpn network access the website on apache via port 8100. So I defined a few iptables rules: #!/bin/sh # My system IP/set ip address of server SERVER_IP="192.168.0.2" # Flushing all rules iptables -F iptables -X # Setting default filter policy iptables -P INPUT DROP iptables -P OUTPUT DROP iptables -P FORWARD DROP # Allow incoming access to port 8100 from OpenVPN 10.8.0.1 iptables -A INPUT -i tun0 -p tcp --dport 80 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o tun0 -p tcp --sport 80 -m state --state ESTABLISHED -j ACCEPT # outgoing http iptables -A OUTPUT -o tun0 -p tcp --dport 80 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A INPUT -i tun0 -p tcp --sport 80 -m state --state ESTABLISHED -j ACCEPT Now when I connect to the server from my client computer and try to access the website on 192.168.0.2:8100, my browser can't open it. Will I have to forward traffic from tun0 to eth0? Or is there anything else I'm missing?

  Read the article

• Setting the default permissions for files uploaded via FTP to a directory

  - by Kerri

  Disclaimer: I'm just a web designer/coder, and server admin stuff is my weakest point of them all. So be easy on me (and very specific). I'm using a simple CMS (Unify) on a site, where part of the functionality is that the client can upload files to a specified directory (using FTP). The permissions for the upload directory are set to 755. But when files are uploaded through the interface, they are uploaded with permissions set to 640 (instead of 644), so site visitors cannot acces the files. When I emailed the CMS's support about this, they told me that it was a server setting, and I need to make sure that files uploaded through FTP are set to 644. Makes perfect sense, but I have no idea how to do this. Any help would be greatly appreciated. This site is a shared site hosted by Network Solutions (Unix), so my access options are limited. I can edit .htaccess files, and php.ini, but that's about all I have access to. It appears I can't even log on via shell. ETA: 11/11/2010 Thanks all. I was able to work around this problem by setting up the CMS's settings in a different way. I'd be interested in following up on Nick O'Niel's suggestions, because I think he's on the right track, but unfortunately I can't access the necessary files on this particular server. So, anyway, I'm leaving this open, since the original questions isn't exactly resolved. Unfortunately, I probably can't put a correct answer to the test, since the shared server in question has nearly all of its config files tightly locked down.

  Read the article

< Previous Page | 46 47 48 49 50 51 52 53 54 55 56 57  | Next Page >