facebook application fan - Page 500

Can Current Backflow from Powered Hub's Adapter & cause PC Damage?

- by SuperUserMan

Getting this short: Can current flow from a powered USB hub's power adapter (lying 10 Meter away) back to computer via usb port and cause damage to Computer components like mobo, etc? What should be my concerns? Using a 2 Amp 5V Power adapter to power a 10m Long Active Repeater USB extension cable with 4 port HUB & plugging into PC's Front port, causes PC Chassis fan to keep running (thought slower than regular speed) Front Chassis HDD & power LED to turn on (though bit dim) may be other things which i cant detect/see at chip level, in motherboard?? All this even after PC is shut down (bit scary) More detail (in case still want to read): To run 4 High power (needing 450 mAmps) Wifi Adapters, far away from PC, Bought Active Repeater USB Extension Cable with 4 Ports & power port at far end http://www.ebay.com/itm/33FT-USB-2-0-Male-to-Female-Extension-Cable-Hub-Splitter-Adapter-with-4-USB-Port-/390846115254 Then added a locally bought 2 Amp 240V AC to 5V DC Power Adapter and plugged into USB hub which is a part of & situated at far end of a 10 Meter Active Repeater usb extension cable. Even 4 Wifi Adapters run fine (appear to) using this setup, but running chassis fan, dimly lighted Power & HDD LED, even when PC is switched off is bit scary and surely mean 5V & some current is flowing all though that 10 meter extension cable into my USB port & powering stuff. Can this cause damage? and what should be my concerns. Of course I can't switch off the power adapter (lying 10 meters away from PC) every time I switch off my PC to prevent this.

Read the article

Can't seem to get chassis fans running

- by TK Kocheran

I've got a ASUS ROG Maximus V Extreme and I'm trying to connect my fans to the chassis fan pins to get them running according to the motherboard. I know for sure that my fans work, as when I test them with my Molex connector, they all happily power on. Here's two of my chassis fans connectors (there are 3-4): Here's the connector that came with either my motherboard or the PSU, can't remember :) I've never seen one of these strange cables before. All I know is that if I plug in the 4-pin mobo connector to either of these fan plugs, fans don't come on and don't show up in the BIOS. (Motherboard has a crazy awesome UEFI BIOS and shows you if it sees the fans.) If I try plugging the 4-pin connection into the mobo and the other side into the PSU, I can't POST. If I plug the PSU connector in without the mobo connector, fans come on. What could I be doing wrong here? Is it a problem with the cable I'm using? Is there something I may have missed in the build?

Read the article

Laptop Overheating with Windows 8

- by Dany Khalife

I recently installed Windows 8 on my HP G62 Laptop and i have been noticing a very strange problem with it. Let alone, for lets say 5 minutes, without even touching it, it starts to heat up and it reaches about 60 degrees (Celsius) with absolutely no applications open (not just on desktop but overall). I dug in a little deep and found out that Maintenance was running when the computer was Idle, so i turned that off From the System's Task Scheduler, and while there i also turned off other services i did not need hoping that would solve the problem. So after a few days, i noticed that the average temperature of my laptop dropped from 55 to 48 degrees while working on Visual Studio. And when i thought the problem had disappeared, it still did show up, only not after 5 minutes, but more like 10 minutes... Here is what i have done so far: Replacing the thermal paste on the CPU and the fan and cleaning the fan (this was like 6 months ago) Using a laptop cooler Running a virus scan (i just formatted my laptop so it would be really weird if i already caught something but who knows) Right now, i believe it has something to do with my gfx driver (Even though it IS up to date, looking closely at the screen, i can see the pixels slowly refresh (kinda like watching static on TV) which i wasn't able to do on Windows 7. If you have any ideas, let me know. Thanks

Read the article

HP tx2510us shuts down without warning, now won't boot, no BIOS codes, screen doesn't light

- by Tim S

Hey all, HP tx2150us worked great for a year and a half, rarely it would shut down instead of sleeping. It started running hot sometimes, I installed Win7, worked great, still running hot. Before Xmas, it gave me evidence of video errors - jagged lines, rows missing. That same night, it started rebooting, then it shut off and wouldn't boot. It gave me a BIOS code, I shut it off to look up the code online. When I turned it on again, it won't boot at all. The LEDs all light up, the fan, HD, and optical all spin up, but the screen never lights up and it doesn't try to boot, nor does it blink any BIOS codes. It just acts like it's sleeping, and won't wake up. I suspected heat problems, so I disassembled it, cleaned the crap out of the fan, and reassembled it, breaking the stereo mic connector. Oh well. When I reassembled it, it booted up into Win7 again, but kept shutting down for no discernible reason. After a dozen or so random reboots like that, it is now back to where it was - turns on but doesn't boot or give BIOS codes. The screen never lights, and everything spins up then idles. Any ideas? I really can't afford to buy a new one and I use(d) it to take ALL my notes, that's why I got a tablet in the first place.

Read the article

xen + debian network after upgrade squeeze to wheeze

- by rush

I've got a Debian + Xen server. After a system upgrade to the stable version the network doesn't come up after boot. Every time after reboot I need to bring it up manually. The network configuration was not changed during upgrade. Here is /etc/network/interfaces: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 11.22.33.44 netmask 255.255.255.0 gateway 11.22.33.1 nameserver 8.8.8.8 After boot ip r shows no route and eth0 has no ip address. Manually ip and route setup goes fine and network starts working. Messages from dmesg about network I've found (looks like nothing interesting) [ 3.894401] ACPI: Fan [FAN3] (off) [ 3.894444] ACPI: Fan [FAN4] (off) [ 4.178348] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:1e:67:14:66:c9 [ 4.178351] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 4.178392] e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: 0100FF-0FF [ 4.178413] e1000e 0000:02:00.0: Disabling ASPM L0s L1 [ 4.178432] xen: registering gsi 16 triggering 0 polarity 1 -- [ 4.223667] ata5: DUMMY [ 4.223668] ata6: DUMMY [ 4.289153] e1000e 0000:02:00.0: eth1: (PCI Express:2.5GT/s:Width x1) 00:1e:67:14:66:c8 [ 4.289155] e1000e 0000:02:00.0: eth1: Intel(R) PRO/1000 Network Connection [ 4.289245] e1000e 0000:02:00.0: eth1: MAC: 3, PHY: 8, PBA No: 1000FF-0FF [ 4.506908] usb 1-1: new high-speed USB device number 2 using ehci_hcd [ 4.542920] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) -- [ 10.362999] EXT4-fs (dm-23): mounted filesystem with ordered data mode. Opts: (null) [ 10.419103] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null) [ 10.988255] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 13.175533] Event-channel device installed. [ 13.287555] XENBUS: Unable to read cpu state -- [ 13.288670] XENBUS: Unable to read cpu state [ 13.965939] Bridge firewalling registered [ 14.134048] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 14.283862] ADDRCONF(NETDEV_UP): peth0: link is not ready [ 14.284543] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 17.800627] e1000e: peth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 17.801377] ADDRCONF(NETDEV_CHANGE): peth0: link becomes ready [ 18.307278] device peth0 entered promiscuous mode [ 24.538899] eth1: no IPv6 routers present [ 28.570902] peth0: no IPv6 routers present I've upgraded two servers and I've such behaviour on two of them. How to fix this and get network starts automatically on boot?

Read the article

Figuring out which PC part is faulty

- by Davy8

I have an odd scenario and I'm having trouble figuring out which is the faulty component. First of all, the video doesn't work, monitor says it's not getting a signal. Monitor's not faulty (works on other computer) so the first suspect was video card. However 2 things make me think it's not the video card. (Don't have another machine with PCIe around to test definitively) First, the GPU fan is spinning so it's getting power. Second, tried putting in an older PCI video card that is known to be working (pulled out of another working machine) and there's still no video. Normally if it's not the video card I'd suspect the motherboard, but everything's getting power on the mobo, so I'm not sure. The case apparently doesn't have system speakers, so can't hear any of the diagnostic beeps either. Also not sure whether a faulty CPU would cause no image at all either. The parts are brand new so something's going to get RMA'd but I'm not sure which component is to blame in this case. (Only slightly related, but I also accidentally put too much thermal paste on the CPU. The fan/heatsink instructions said to put the whole tube which seemed like a lot compared to previous experience, and as I started squeezing I knew it was definitely too much and stopped at about 1/3 but against my better judgement I didn't wipe any off. I'm not sure whether that would cause problems other than not cooling as effectively as it should)

Read the article

Gaming blew fuse: how to overcome?

- by George Tomlinson

I've been gaming for a while now. When playing certain games this PC goes into overdrive. The fan/fans start/s to sound like a jet engine it/they get/s so busy. Also I have smelt burning when this has happened. The fuse blew on the 4 socket adapter I was using recently. On the following thread someone said this could be due to the PSU not being strong enough to handle the load, in what it seems could be a related issue someone had, although the person who posted this question did say that blowing a fan on their PC stopped it crashing in that case: http://www.tomshardware.co.uk/answers/id-2047543/gtx-650-overheating-issue.html. This is exactly what they said: Your GPU isn't overheating. 70+ before it would shutdown and cause a restart. Make sure your PSU is strong enough to handle your new system at load and possibly run Memtest to check your RAM (although not BSOD'ing and just shutting down points to the PSU). This (the PSU part) makes more sense to me than it being to do with dust etc, since it seems a more plausible explanation of why the fuse blew. The PC has no problems except when playing certain games: i.e. TERA Rising and WoW with add-ons (I think WoW is ok as long as I don't have more than 1 add-on (Healers Have To Die)). I'm just wondering if anyone knows or can suggest what I might be able to do to be able to play these games without this problem occurring. The PC's spec is this: Display: NVIDIA GeForce GTX 650 8GB RAM (6 available) Processor: AMD FX (tm) - 8120 Eight-Core Processor - 3.1 GHz, 4 Cores, 8 Logical Processors I have read on another post that forcing vsync in the Nvidia Control Panel helped with what seems could be a similar problem, so I plan to see if that solves it, God permitting.

Read the article

Gateway laptop module bay light repeating 12 flashes - what error is that?

- by Simurr

I have a Gateway M465-E laptop currently running fine with a T2300E Core Duo installed. I wanted to upgrade it to a Core 2 Duo. My brother has the same model laptop and that took a Core 2 Duo (T7200) just fine. Picked up a T7200 on ebay and installed it. Normally when booting all the indicator lights flash once and the fan spins up before the machine actually starts to POST. With the T7200 installed all the lights flash and the fan spins up, but the module bay activity light flashes 12 times repeatedly. I'm assuming this is an error code, but can find no information about it. There are no beep codes. I've removed the ram, HD, Bay module and no change. Switched back to the T2300E and everything works fine. Anyone know what that error code is? The motherboard was actually manufactured by Foxconn if that helps. Update 1 Returned the CPU as defective. I tested it in 3 M465-E's and all of them did exactly the same thing. I still have no idea what the error code is. I'd still like to know for future reference. Perhaps I should try removing the CPU from one of them and see what happens.

Read the article

Visual Studio App.config XML Transformation

- by João Angelo

Visual Studio 2010 introduced a much-anticipated feature, Web configuration transformations. This feature allows to configure a web application project to transform the web.config file during deployment based on the current build configuration (Debug, Release, etc). If you haven’t already tried it there is a nice step-by-step introduction post to XML transformations on the Visual Web Developer Team Blog and for a quick reference on the supported syntax you have this MSDN entry. Unfortunately there are some bad news, this new feature is specific to web application projects since it resides in the Web Publishing Pipeline (WPP) and therefore is not officially supported in other project types like such as a Windows applications. The keyword here is officially because Vishal Joshi has a nice blog post on how to extend it’s support to app.config transformations. However, the proposed workaround requires that the build action for the app.config file be changed to Content instead of the default None. Also from the comments to the said post it also seems that the workaround will not work for a ClickOnce deployment. Working around this I tried to remove the build action change requirement and at the same time add ClickOnce support. This effort resulted in a single MSBuild project file (AppConfig.Transformation.targets) available for download from GitHub. It integrates itself in the build process so in order to add app.config transformation support to an existing Windows Application Project you just need to import this targets file after all the other import directives that already exist in the *.csproj file. Before – Without App.config transformation support ... <Import Project="$(MSBuildToolsPath)\Microsoft.CSharp.targets" /> <Target Name="BeforeBuild"> </Target> <Target Name="AfterBuild"> </Target> </Project> After – With App.config transformation support ... <Import Project="$(MSBuildToolsPath)\Microsoft.CSharp.targets" /> <Import Project="C:\MyExtensions\AppConfig.Transformation.targets" /> <Target Name="BeforeBuild"> </Target> <Target Name="AfterBuild"> </Target> </Project> As a final disclaimer, the testing time was limited so any problem that you find let me know. The MSBuild project invokes the mage tool so the Framework SDK must be installed. Update: I finally had some spare time and was able to check the problem reported by Geoff Smith and believe the problem is solved. The Publish command inside Visual Studio triggers a build workflow different than through MSBuild command line and this was causing problems. I posted a new version in GitHub that should now support ClickOnce deployment with app.config tranformation from within Visual Studio and MSBuild command line. Also here is a link for the sample application used to test the new version using the Publish command with the install location set to be from a CD-ROM or DVD-ROM and selected that the application will not check for updates. Thanks to Geoff for spotting the problem.

Read the article

Sun Fire X4270 M3 SAP Enhancement Package 4 for SAP ERP 6.0 (Unicode) Two-Tier Standard Sales and Distribution (SD) Benchmark

- by Brian

Oracle's Sun Fire X4270 M3 server achieved 8,320 SAP SD Benchmark users running SAP enhancement package 4 for SAP ERP 6.0 with unicode software using Oracle Database 11g and Oracle Solaris 10. The Sun Fire X4270 M3 server using Oracle Database 11g and Oracle Solaris 10 beat both IBM Flex System x240 and IBM System x3650 M4 server running DB2 9.7 and Windows Server 2008 R2 Enterprise Edition. The Sun Fire X4270 M3 server running Oracle Database 11g and Oracle Solaris 10 beat the HP ProLiant BL460c Gen8 server using SQL Server 2008 and Windows Server 2008 R2 Enterprise Edition by 6%. The Sun Fire X4270 M3 server using Oracle Database 11g and Oracle Solaris 10 beat Cisco UCS C240 M3 server running SQL Server 2008 and Windows Server 2008 R2 Datacenter Edition by 9%. The Sun Fire X4270 M3 server running Oracle Database 11g and Oracle Solaris 10 beat the Fujitsu PRIMERGY RX300 S7 server using SQL Server 2008 and Windows Server 2008 R2 Enterprise Edition by 10%. Performance Landscape SAP-SD 2-Tier Performance Table (in decreasing performance order). SAP ERP 6.0 Enhancement Pack 4 (Unicode) Results (benchmark version from January 2009 to April 2012) System OS Database Users SAPERP/ECCRelease SAPS SAPS/Proc Date Sun Fire X4270 M3 2xIntel Xeon E5-2690 @2.90GHz 128 GB Oracle Solaris 10 Oracle Database 11g 8,320 20096.0 EP4(Unicode) 45,570 22,785 10-Apr-12 IBM Flex System x240 2xIntel Xeon E5-2690 @2.90GHz 128 GB Windows Server 2008 R2 EE DB2 9.7 7,960 20096.0 EP4(Unicode) 43,520 21,760 11-Apr-12 HP ProLiant BL460c Gen8 2xIntel Xeon E5-2690 @2.90GHz 128 GB Windows Server 2008 R2 EE SQL Server 2008 7,865 20096.0 EP4(Unicode) 42,920 21,460 29-Mar-12 IBM System x3650 M4 2xIntel Xeon E5-2690 @2.90GHz 128 GB Windows Server 2008 R2 EE DB2 9.7 7,855 20096.0 EP4(Unicode) 42,880 21,440 06-Mar-12 Cisco UCS C240 M3 2xIntel Xeon E5-2690 @2.90GHz 128 GB Windows Server 2008 R2 DE SQL Server 2008 7,635 20096.0 EP4(Unicode) 41,800 20,900 06-Mar-12 Fujitsu PRIMERGY RX300 S7 2xIntel Xeon E5-2690 @2.90GHz 128 GB Windows Server 2008 R2 EE SQL Server 2008 7,570 20096.0 EP4(Unicode) 41,320 20,660 06-Mar-12 Complete benchmark results may be found at the SAP benchmark website http://www.sap.com/benchmark. Configuration and Results Summary Hardware Configuration: Sun Fire X4270 M3 2 x 2.90 GHz Intel Xeon E5-2690 processors 128 GB memory Sun StorageTek 6540 with 4 * 16 * 300GB 15Krpm 4Gb FC-AL Software Configuration: Oracle Solaris 10 Oracle Database 11g SAP enhancement package 4 for SAP ERP 6.0 (Unicode) Certified Results (published by SAP): Number of benchmark users: 8,320 Average dialog response time: 0.95 seconds Throughput: Fully processed order line: 911,330 Dialog steps/hour: 2,734,000 SAPS: 45,570 SAP Certification: 2012014 Benchmark Description The SAP Standard Application SD (Sales and Distribution) Benchmark is a two-tier ERP business test that is indicative of full business workloads of complete order processing and invoice processing, and demonstrates the ability to run both the application and database software on a single system. The SAP Standard Application SD Benchmark represents the critical tasks performed in real-world ERP business environments. SAP is one of the premier world-wide ERP application providers, and maintains a suite of benchmark tests to demonstrate the performance of competitive systems on the various SAP products. See Also SAP Benchmark Website Sun Fire X4270 M3 Server oracle.com OTN Oracle Solaris oracle.com OTN Oracle Database 11g Release 2 Enterprise Edition oracle.com OTN Disclosure Statement Two-tier SAP Sales and Distribution (SD) standard SAP SD benchmark based on SAP enhancement package 4 for SAP ERP 6.0 (Unicode) application benchmark as of 04/11/12: Sun Fire X4270 M3 (2 processors, 16 cores, 32 threads) 8,320 SAP SD Users, 2 x 2.90 GHz Intel Xeon E5-2690, 128 GB memory, Oracle 11g, Solaris 10, Cert# 2012014. IBM Flex System x240 (2 processors, 16 cores, 32 threads) 7,960 SAP SD Users, 2 x 2.90 GHz Intel Xeon E5-2690, 128 GB memory, DB2 9.7, Windows Server 2008 R2 EE, Cert# 2012016. IBM System x3650 M4 (2 processors, 16 cores, 32 threads) 7,855 SAP SD Users, 2 x 2.90 GHz Intel Xeon E5-2690, 128 GB memory, DB2 9.7, Windows Server 2008 R2 EE, Cert# 2012010. Cisco UCS C240 M3 (2 processors, 16 cores, 32 threads) 7,635 SAP SD Users, 2 x 2.90 GHz Intel Xeon E5-2690, 128 GB memory, SQL Server 2008, Windows Server 2008 R2 DE, Cert# 2012011. Fujitsu PRIMERGY RX300 S7 (2 processors, 16 cores, 32 threads) 7,570 SAP SD Users, 2 x 2.90 GHz Intel Xeon E5-2690, 128 GB memory, SQL Server 2008, Windows Server 2008 R2 EE, Cert# 2012008. HP ProLiant DL380p Gen8 (2 processors, 16 cores, 32 threads) 7,865 SAP SD Users, 2 x 2.90 GHz Intel Xeon E5-2690, 128 GB memory, SQL Server 2008, Windows Server 2008 R2 EE, Cert# 2012012. SAP, R/3, reg TM of SAP AG in Germany and other countries. More info www.sap.com/benchmark

Read the article

Smart Help with UPK

- by [email protected]

A short lesson on how awesome Smart Help is. In Oracle UPK speak, there are targeted and non-targeted applications. Targeted applications are Oracle EBS, PeopleSoft, Siebel, JD Edwards, SAP and a few others. Non-targeted applications are either custom built or other third party off the shelf applications. For most targeted applications you'll see better object recognition (during recording) and also Help Integration for that application. Help integration means that someone technical modifies the help link in your application to call up the UPK content that has been created. If you have seen this presented before, this is usually where the term context sensitive help is mentioned and the Do It mode shows off. The fact that UPK builds context sensitive help for its targeted applications automatically is awesome enough, but there is a whole new world out there and it's called "custom and\or third party apps." For the purposes of Smart Help and this discussion, I'm talking about the browser based applications. How does UPK support these apps? It used to be that you had to have your vendor try to modify the Help link to point to UPK or if your company had control over the applications configuration menus, then you get someone on your team to modify this for you. But as you start to use UPK for more than one, two or three applications, the administration of this starts to become daunting. Multiple administrators, multiple player packages, multiple call points, multiple break points, help doesn't always work the same way for every application (picture the black white infomercial with an IT person trying to configure a bunch of wires or something funny like that). Introducing Smart Help! (in color of course, new IT person, probably wearing a blue shirt and smiling). Smart help eliminates the need to configure multiple browser help integration points, and adds a icon to the users browser itself. You're using your browser to read this now correct? Look up at the icons on your browser, you have the home link icon, print icon, maybe an RSS feed icon. Smart Help is icon that gets added to the users browser just like the others. When you click it, it first recognizes which application you're in and then finds the UPK created material for you and returns the best possible match, for (hold on to your seat now) both targeted and non-targeted applications (browser based applications). But wait, there's more. It does this automatically! You don't have to do anything! All you have to do is record content, UPK and Smart Help do the rest! This technology is not new. There are customers out there today that use this for as many as six applications! The real hero here is SMART MATCH. Smart match is the technology that's used to determine which application you're in and where you are when you click on Smart Help. We'll save that for a one-on-one conversation. Like most other awesome features of UPK, it ships with the product. All you have to do is turn it on. To learn more about Smart Help, Smart Match, Targeted and Non-Targeted applications, contact your UPK Sales Consultant or me directly at [email protected]

Read the article

HTML Presence Controls for Communications Server 14 CodePlex Project

Showing Presence on the Web If youre running Office Communicator Server 2007 R2, you know that your only out-of-the-box option for showing presence on the web is to use the NameControl ActiveX control that ships as part of Office. Being an ActiveX control, this obviously means that youre limited to Internet Explorer. Also, nobody likes ActiveX controls What if you want to show the presence of users in a pure ASP.NET or HTML application and cant assume that the user has Communicator installed you need anASP.NET or HTML presence control. HTML Presence Controls for Microsoft Communications Server 14 We recently worked with the UC team at Microsoft on a keynote demo for TechEd 2010 in New Orleans. The demo was for a fictitious airline Fabrikam Airlines that wanted to show the presence of customer service and reservations agents on its website. Customers could also start an instant message conversation with the agents using a Silverlight web chat window that used WCF to communicate with the backend UCMA application. We built HTML Presence Controls that use AJAX to poll a REST-based WCF service running in IIS and hosting a UCMA 3.0 presence subscription application. Microsoft has graciously allowed us to publish these on CodePlex so that the development community can benefit from them: http://htmlpresencecontrols.codeplex.com/ We will be maintaining the CodePlex project as new builds of UCMA 3.0 become available. Check out the project home page on CodePlex for some more in-depth details on how the controls are implemented. ASP.NET Server Control Implementation Were providing an ASP.NET Server Control implementation that you can use stand-alone or in a GridView or Repeater (or other layout control). The control has properties that allow you to control its appearance, e.g. you can choose whether or not to show the contacts name or availability text. You can also use the server control in a layout control such as a GridView by putting it in a TemplateColumn and binding to the Sip Uri in the data source. Disclaimer Once we started working on these, we realized why Microsoft hasnt shipped such controls as part of the product. There are some tradeoffs you have to be aware of when using these controls, heres the high level. Privacy The backend UCMA 3.0 application that subscribes to presence of contacts runs as a trusted application and can thus retrieve the presence of any user in the organization. Theres currently no good way in UCMA to apply any privacy rules to ensure that the consumer of the presence controls has permission to see the presence of the contacts that the controls are bound to. Just to be absolutely crystal clear These controls provide a way to query the presence of any user in the organization, regardless of the privacy relationship between the person consuming the controls and the contacts whose presence is being displayed. Were exploring options for a design pattern that would allow you to inject some privacy controls. Keep in mind though that you would most likely be responsible for implementing this logic, as there is currently no functionality in UCMA that allows you to do that. Polling the WCF REST Service The controls poll the backend WCF service to retrieve the presence of contacts - you can control the refresh interval so that they poll less often. We implemented a caching layer so that the WCF service is always communicating with a presence cache it never communicates directly with Communications Server. For example, if your web page is showing the presence of sip:[email protected] and 500 people have the page open, the presence cache only contains one instance of the subscription Communications Server is not being polled 500 times for the presence of that contact. Once the presence of a contact changes, it is updated in the cache. There are some server-based push mechanisms that would work nicely here, such as the one that Outlook Web Access 2010 uses. Unfortunately we didnt have time to explore these options. Community Contribution Take a look at the project Issue Tracker, there are a couple of things we can use some help with. Shoot me a note if youre interested in contributing to the project. Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

Read the article

‘Publish…’ Resulting in Directory With No Files

- by ToStringTheory

I was pulling my hair out with this one… Which isn’t good considering I have so little of it left! I had just upgraded to the Windows Azure 1.7 SDK the day before with no problems, and used the upgraded ‘Publish…’ dialog to successfully publish a website to my hard disk for hosting on an internal development server. However, when trying to deploy another project to my file system, it said it was successful, but there were no files in the directory. The only difference, the first project was an Azure project, the second was a standard ASP.Net Web Application. If you installed the Windows Azure 1.7 SDK, you may want to read this. The Problem At first it appears that there is no problem: However you may remember that when publishing a web application, the output window will generally iterate through each of the directories as it copies the files from that directory over. Sure enough, when looking at the output directory – there are no files, no bin directory, no nothing… Troubleshooting Since one site published and the other did not, I believed that the failure may have been to a failed SQL Server 2012 installation that happened between publish. I rolled back the installation, however that did not work either. I also checked the Configuration Manager dialog, and ensured that the projects were selected to actually build (just checking, even though the output said it built them..) I checked the properties of the solution and the projects, and a selection of files in the project to make sure that they were selected for content… Nothing seemed to work. I then decided to uninstall the Azure 1.7 SDK to see if that was the culprit. When I opened the Windows 7 ‘Uninstall a Program’ dialog, I noticed that the Azure SDK came with 2 extra packages that just so happen to be in a Release Candidate state from Microsoft – ‘Microsoft Web Deploy 3.0’ and ‘Microsoft Web Publish – Visual Studio 2010’. It dawned on me that the publish dialog must not be just for Azure, since it appeared when I tried to deploy the regular web application as well. Therefore, it must have been an upgrade to the publish mechanism in Visual Studio. I uninstalled both of the programs and received my old publish dialog once again, and was able to successfully publish the solution above as I had done before. After celebrating solving the problem, I tried reinstalling the Azure package, to see if it would repair the publishing process. Even though it brought back the updated dialogs, it did not publish any files. Instead of uninstalling and retreating, I now KNEW what the cause was, and these were packages not just for Azure. I now knew a product name to search for. The Solution Sure enough, with the correct search term in Google – ‘microsoft web publish no files’, and setting the timeline to 1 week, I found what I needed - Microsoft Connect - Publish Web Application FAILS! (by Andrew Rits). I am surprised that I missed something that ended up being so simple… In the Configuration Manager, I had the following settings: This is how I had been building and debugging the solution always… However, apparently when installing the new Web Publishing package, it does things a little differently in its configuration for publishing: You see the difference? The configuration here is set to ‘x86’ instead of ‘Any CPU’. Sure enough, as soon as I switched the configuration to ‘Release – Any CPU’, the deployment built and published all of my files as I expected. Conclusion It was a small change, but apparently the new ‘Publish web application’ defaults to the x86 configuration, thereby not copying any of the project/bin files to the publish target directory. I spent forever trying things, but this small drop down eluded me until I was able to target that the dialog was actually working apparently, I just didn’t have the correct configuration. I hope that this saves you the hours of frustration and hastened hair loss that it caused me… I also hope that before Microsoft brings this publishing package out of RC status, that they change the behavior of that menu to default to the settings of the old publish menu for the first time. Happy Coding!

Read the article

Using NServiceBus behind a custom web service

- by Michael Stephenson

In this post I'd like to talk about an architecture scenario we had recently and how we were able to utilise NServiceBus to help us address this problem. Scenario Cognos is a reporting system used by one of my clients. A while back we developed a web service façade to allow line of business applications to be able to access reports from Cognos to support their various functions. The service was intended to provide access to reports which were quick running reports or pre-generated reports which could be accessed real-time on demand. One of the key aims of the web service was to provide a simple generic interface to allow applications to get any report without needing to worry about the complex .net SDK for Cognos. The web service also supported multi-hop kerberos delegation so that report data could be accesses under the context of the end user. This service was working well for a period of time. The Problem The problem we encountered was that reports were now also required to be available to batch processes. The original design was optimised for low latency so users would enjoy a positive experience, however when the batch processes started to request 250+ concurrent reports over an extended period of time you can begin to imagine the sorts of problems that come into play. The key problems this new scenario caused are: Users may be affected and the latency of on demand reports was significantly slower The Cognos infrastructure was not scaled sufficiently to be able to cope with these long peaks of load From a cost perspective it just isn't feasible to scale the Cognos infrastructure to be able to handle the load when it is only for a couple of hour window each night. We really needed to introduce a second pattern for accessing this service which would support high through-put scenarios. We also had little control over the batch process in terms of being able to throttle its load. We could however make some changes to the way it accessed the reports. The Approach My idea was to introduce a throttling mechanism between the Web Service Façade and Cognos. This would allow the batch processes to push reports requests hard at the web service which we were confident the web service can handle. The web service would then queue these requests and process them behind the scenes and make a call back to the batch application to provide the report once it had been accessed. In terms of technology we had some limitations because we were not able to use WCF or IIS7 where the MSMQ-Activated WCF services could have helped, but we did have MSMQ as an option and I thought NServiceBus could do just the job to help us here. The flow of how this would work was as follows: The batch applications would send a request for a report to the web service The web service uses NServiceBus to send the message to a Queue The NServiceBus Generic Host is running as a windows service with a message handler which subscribes to these messages The message handler gets the message, accesses the report from Cognos The message handler calls back to the original batch application, this is decoupled because the calling application provides a call back url The report gets into the batch application and is processed as normal This approach looks something like the below diagram: The key points are an application wanting to take advantage of the batch driven reports needs to do the following: Implement our call back contract Make a call to the service providing a call back url Provide a correlation ID so it knows how to tie each response back to its request What does NServiceBus offer in this solution So this scenario is not the typical messaging service bus type of solution people implement with NServiceBus, but it did offer the following: Simplified interaction with MSMQ Offered the ability to configure the number of processes working through the queue so we could find a balance between load on Cognos versus the applications end to end processing time NServiceBus offers retries and a way to manage failed messages NServiceBus offers a high availability setup The simple thing is that NServiceBus gave us the platform to build the solution on. We just implemented a message handler which functionally processed a message and we could rely on NServiceBus to do all of the hard work around managing the queues and all of the lower level things that would have took ages to write to any kind of robust level. Conclusion With this approach we were able to deal with a fairly significant performance issue with out too much rework. Hopefully this write up gives people some insight into ideas on how to leverage the excellent NServiceBus framework to help solve integration and high through-put scenarios.

Read the article

Start/Stop Window Service from ASP.NET page

- by kaushalparik27

Last week, I needed to complete one task on which I am going to blog about in this entry. The task is "Create a control panel like webpage to control (Start/Stop) Window Services which are part of my solution installed on computer where the main application is hosted". Here are the important points to accomplish:[1] You need to add System.ServiceProcess reference in your application. This namespace holds ServiceController Class to access the window service.[2] You need to check the status of the window services before you explicitly start or stop it.[3] By default, IIS application runs under ASP.NET account which doesn't have access rights permission to window service. So, Very Important part of the solution is: Impersonation. You need to impersonate the application/part of the code with the User Credentials which is having proper rights and permission to access the window service. If you try to access window service it will generate "access denied" error.The alternatives are: You can either impersonate whole application by adding Identity tag in web.cofig as: <identity impersonate="true" userName="" password=""/>This tag will be under System.Web section. the "userName" and "password" will be the credentials of the user which is having rights to access the window service. But, this would not be a wise and good solution; because you may not impersonate whole website like this just to have access window service (which is going to be a small part of code).Second alternative is: Only impersonate part of code where you need to access the window service to start or stop it. I opted this one. But, to be fair; I am really unaware of the code part for impersonation. So, I just googled it and injected the code in my solution in a separate class file named as "Impersonate" with required static methods. In Impersonate class; impersonateValidUser() is the method to impersonate a part of code and undoImpersonation() is the method to undo the impersonation. Below is one example: You need to provide domain name (which is "." if you are working on your home computer), username and password of appropriate user to impersonate.[4] Here, it is very important to note that: You need to have to store the Access Credentials (username and password) which you are going to user for impersonation; to some secured and encrypted format. I have used Machinekey Encryption to store the value encrypted value inside database.[5] So now; The real part is to start or stop a window service. You are almost done; because ServiceController class has simple Start() and Stop() methods to start or stop a window service. A ServiceController class has parametrized constructor that takes name of the service as parameter.Code to Start the window service: Code to Stop the window service: Isn't that too easy! ServiceController made it easy :) I have attached a working example with this post here to start/stop "SQLBrowser" service where you need to provide proper credentials who have permission to access to window service. hope it would helps./.

Read the article

Auto-cancel reason not found (6, 13906)

- by Rajesh Sharma

There are many errors in the application which are never invoked because of appropriate application configuration done at the time of implementation by the solution architects. So typically, as an application end user you would never stumble upon such errors. But what if the application administrator inadvertently changes the configuration/setup in the development, test, QA, or production environment? This is the time when you as an end user are introduced to a brand-new error for which you may not have a clue or understanding to what it means and neither the access/privilege to rectify it. In this post we'll focus on one such error '6, 13906 - Auto-cancel reason not found'. You get this error if you have not defined a Bill (Segment) Cancel Reason (Admin Menu, B, Bill Cancel Reason) code with System Default value of Turn off auto-cancel. Consider a scenario when you are about to final bill an 'Account' for which the bill period's cut-off date you selected is falling on or after the Service Agreement's (SA) end/stop date (basically SA is Stopped with a date earlier than it was billed previously). And for the same 'Account' either: Bill segments exists that end after the SA's end date OR Non-closing bill segments exists that end on the SA's end date (OR closing bill segments that do not end on SA's end date or do not exist at all - remember closing/final bill segment is generated if the SA is in Stopped status). CC&B detects such scenario and attempts to cancel all such violating bill segments automatically, but NOT if you are generating the bill Online. If online, the system assumes that you know what you are doing, and prompts you with error 2, 13716 - Bill segments that violate the SA (%1) End Date (%2) exist to take necessary action. If in batch, system automatically cancels these kinds of bill segment(s). Since this happens in the background, you have to define within the application which System Default Bill (Segment) cancellation reason code identified as Turn off auto-cancel, should be used by the process when it attempts to cancel any such violating bill segments (You already know that you cannot cancel a bill segment without giving a reason for cancellation). So what exactly happens during batch billing? Bill Segment generation routine at first determines billing eligibility of the service agreement being billed. One of the billing eligibility criteria is to check the SA's previous bill segments which have end dates greater than the current cut-off date/end date. Technically, the routine retrieves a count of such violating bill segments. SELECT COUNT (*) FROM CI_BSEG WHERE SA_ID = :SA-ID AND BSEG_STAT_FLG = '50' -- Frozen AND END_DT IS NOT NULL AND (END_DT > '03-JUN-2010' -- Bill segment greater than SA's End Date OR OR (END_DT = '03-JUN-2010' AND CLOSING_BSEG_SW = 'N')) -- Non-closing bill segment ending on SA's end date If the count is greater than zero, Bill segment generation routine executes another program to auto-cancel such bill segments. Auto-cancel program retrieves the 'Bill Cancel Reason' code which is identified as Turn off auto-cancel. Retrieved cancel reason code is then placed on the bill segments that are being cancelled automatically. During this process if the routine fails to determine the bill cancel reason code having System Default Turn off auto-cancel because it was not been configured, you get a bill exception 6, 13906 - Auto-cancel reason not found. Also note that duplicate or multiple System Default codes identified as Turn off auto-cancel are not allowed. CC&B would complain with an error 2, 54201. Duplicate validation/check is also performed within Auto-cancel routine, if suppose for test purposes you executed a DML statement updating CI_BILL_CAN_RSN.BSCAN_SYS_DFLT_FLG with a value 'T'.

Read the article

Open Your Windows - 4/Maio/10

- by Claudia Costa

This FREE technical briefing is designed to show ISVs/SIs how to leverage the Oracle11g Technology especially in the small to medium business. The briefing focuses on Oracle's 11g platform on Windows & Linux and gives a very comprehensive technical competitive overview to the products offered by Microsoft. The technical part covers Integration and Migration aspects of various Microsoft products such as SQL Server, .NET and Active Directory. Register Today! With Oracle11g Oracle introduced various products (ApplicationExpress, OracleExpress Edition, ADF, BPEL) and licenses (Oracle Database Standard Edition One, Application Server Java Edition) specifically targetting the small to medium business market and to show that Oracle Database and Application Server are as easy to use and costs less than Microsoft products in terms of purchase price and ongoing support & maintenance and even much much less when considering the Linux platform.. For those ISVs have already adopted Microsoft .NET framework and using SQL Server as their database layer, we will demostrate that Oracle11g Database is as easy as SQL Server to install, configure, and manage. In addition to that, their application development .NET platform does not requires dramatic changes to enable it to run on the Oracle database. Besides the standard functionalities, Oracle has enhanced some of the advanced features; such as Intermedia, Security, Ref Cursor, etc., tightly integrated with .NET framework so that .NET developers can take full advantage of the Oracle technology, without worrying or programming the complexity components. Objectives · Understand Oracle's strategy and commitment on Windows & Linux · Learn how to migrate from SQL Server to Oracle on Windows AND Linux · Understand that Oracle11g is easy to manage and to install on Windows & Linux · Learn how to integrate Windows products with the Oracle11g Platform · Learn how Oracle products interoperate & integrate with Microsoft .NET · Learn how an Oracle database on Windows will easily be ported to a lower cost Linux database platform and interoperate with a .NET application Prerequisites General Operating System expertise including MS-Windows and Linux. Agenda · Welcome and Intro · Oracle at a glance · Strategy; Small to Medium Business, Microsoft and Linux · Oracle 11g Architecture on Linux & Windows · Managing Oracle 11g on Linux & Windows · Application Development · Migration · Value propositions for ISVs & Wrap-up ---------------------------------------------------------------------------- Para mais informações/inscrições, contacte: [email protected].

Read the article

Oracle Database 11gR2 11.2.0.3 Certified with E-Business Suite on Windows

- by John Abraham

As a follow up to our original certification announcement, Oracle Database 11g Release 2 (11.2.0.3) is now certified with Oracle E-Business Suite Release 11i and Release 12 on the following Microsoft Windows operating systems: Release 12.1 (12.1.1 and higher) Microsoft Windows Server (32-bit) (2003, 2008) Microsoft Windows x64 (64-bit) (20031, 20081, 2008 R22) Release 12.0 (12.0.4 and higher) Microsoft Windows Server (32-bit) (2003) Microsoft Windows x64 (64-bit) (2003, 2008)1 Release 11i (11.5.10.2 + ATG PF.H RUP 6 and higher) Microsoft Windows Server (32-bit) (2003, 20081) Microsoft Windows x64 (64-bit) (2003, 2008, 2008 R2)1 Notes 1: This OS is a 'database tier only' or 'split tier configuration' platform where the application tier must be on a fully certified E-Business Suite platform. 2: This OS is a 'database tier only' platform for Release 11i. For 12.1.1 or higher, it is also supported on the application tier via the migration process outlined in My Oracle Support Document 1188535.1. Pending Certification E-Business Suite 12.0 with 11.2.0.3 Split Tier Certification on Microsoft Windows x64 (64-bit) (2008 R2) is in progress and will be announced separately. This announcement for Oracle E-Business Suite 11i and R12 includes: Real Application Clusters (RAC) Oracle Database Vault Transparent Data Encryption (Column Encryption) TDE Tablespace Encryption Advanced Security Option (ASO)/Advanced Networking Option (ANO) Export/Import Process for Oracle E-Business Suite Release 11i and Release 12 Database Instances Transportable Database and Transportable Tablespaces Data Migration Processes for Oracle E-Business Suite Release 11i and Release 12 References MOS Document 881505.1 - Interoperability Notes - Oracle E-Business Suite Release 11i with Oracle Database 11g Release 2 (11.2.0) MOS Document 1058763.1 - Interoperability Notes - Oracle E-Business Suite Release 12 with Oracle Database 11g Release 2 (11.2.0) MOS Document 1091086.1 - Integrating Oracle E-Business Suite Release 11i with Oracle Database Vault 11gR2 MOS Document 1091083.1 - Integrating Oracle E-Business Suite Release 12 with Oracle Database Vault 11gR2 MOS Document 216205.1 - Database Initialization Parameters for Oracle E-Business Suite 11i MOS Document 396009.1 - Database Initialization Parameters for Oracle Applications Release 12 MOS Document 823586.1 - Using Oracle 11g Release 2 Real Application Clusters with Oracle E-Business Suite Release 11i MOS Document 823587.1 - Using Oracle 11g Release 2 Real Application Clusters with Oracle E-Business Suite Release 12 MOS Document 403294.1 - Using Transparent Data Encryption (TDE) Column Encryption with Oracle E-Business Suite Release 11i MOS Document 732764.1 - Using Transparent Data Encryption (TDE) Column Encryption with Oracle E-Business Suite Release 12 MOS Document 828223.1 - Using TDE Tablespace Encryption with Oracle E-Business Suite Release 11i MOS Document 828229.1 - Using TDE Tablespace Encryption with Oracle E-Business Suite Release 12 MOS Document 391248.1 - Encrypting Oracle E-Business Suite Release 11i Network Traffic using Advanced Security Option and Advanced Networking Option MOS Document 732764.1 - Using Transparent Data Encryption (TDE) Column Encryption with Oracle E-Business Suite Release 12 MOS Document 557738.1 - Export/Import Process for Oracle E-Business Suite Release 11i Database Instances Using Oracle Database 11g Release 1 or 11g Release 2 MOS Document 741818.1 - Export/Import Process for Oracle E-Business Suite Release 12 Database Instances Using Oracle Database 11g Release 1 or 11g Release 2 MOS Document 1366265.1 - Using Transportable Tablespaces to Migrate Oracle Applications 11i Using Oracle Database 11g Release 2 MOS Document 1311487.1 - Using Transportable Tablespaces to Migrate Oracle E-Business Suite Release 12 Using Oracle Database 11g Release 2 MOS Document 729309.1 - Using Transportable Database to Migrate Oracle E-Business Suite Release 11i Using Oracle Database 10g Release 2 or 11g MOS Document 734763.1 - Using Transportable Database to Migrate Oracle E-Business Suite Release 12 Using Oracle Database 10g Release 2 or 11g MOS Document 1188535.1 - Migrating Oracle E-Business Suite R12 to Microsoft Windows Server 2008 R2 Please also review the platform-specific Oracle Database Installation Guides for operating system and other prerequisites. Related Articles Database 11.2.0.2 Certified with EBS R12 on IBM: Linux on System z EBS R12 Certified with Database 11gR2 on SLES 11 11gR2 11.2.0.3 Database Certified with E-Business Suite

Read the article

Opening the Internet Settings Dialog and using Windows Default Network Settings via Code

- by Rick Strahl

Ran into a question from a client the other day that asked how to deal with Internet Connection settings for running HTTP requests. In this case this is an old FoxPro app and it's using WinInet to handle the actual HTTP connection. Another client asked a similar question about using the IE Web Browser control and configuring connection properties. Regardless of platform or tools used to do HTTP connections, you can probably configure custom connection and proxy settings in your application to configure http connection settings manually. However, this is a repetitive process for each application requires you to track system information in your application which is undesirable. Often it's much easier to rely on the system wide proxy settings that Windows provides via the Internet Settings dialog. The dialog is a Control Panel applet (inetcpl.cpl) and is the same dialog that you see when you pop up Internet Explorer's Options dialog: This dialog controls the Windows connection properties that determine how the Windows HTTP stack connects to the Internet and how Proxy's are used if configured. Depending on how the HTTP client is configured - it can typically inherit and use these global settings. Loading the Settings Dialog Programmatically The settings dialog is a Control Panel applet with the name of: inetcpl.cpl and you can use any Shell execution mechanism (Run dialog, ShellExecute API, Process.Start() in .NET etc.) to invoke the dialog. Changes made there are immediately reflected in any applications that use the default connection settings. In .NET you can simply do this to bring up the Internet Settings dialog with the Connection tab enabled: Process.Start("inetcpl.cpl",",4"); In FoxPro you can simply use the RUN command to execute inetcpl.cpl: lcCmd = "inetcpl.cpl ,4" RUN &lcCmd Using the Default Connection/Proxy Settings When using WinInet you specify the Http connect type in the call to InternetOpen() like this (FoxPro code here): hInetConnection=; InternetOpen(THIS.cUserAgent,0,; THIS.chttpproxyname,THIS.chttpproxybypass,0) The second parameter of 0 specifies that the default system proxy settings should be used and it uses the settings from the Internet Settings Connections tab. Other connection options for HTTP connections include 1 - direct (no proxies and ignore system settings), 3 - explicit Proxy specification. In most situations a connection mode setting of 0 should work. In .NET HTTP connections by default are direct connections and so you need to explicitly specify a default proxy or proxy configuration to use. The easiest way to do this is on the application level in the config file: <configuration> <system.net> <defaultProxy> <proxy bypassonlocal="False" autoDetect="True" usesystemdefault="True" /> </defaultProxy> </system.net> </configuration> You can do the same sort of thing in code specifying the proxy explicitly and using System.Net.WebProxy.GetDefaultProxy(). So when making HTTP calls to Web Services or using the HttpWebRequest class you can set the proxy with: StoreService.Proxy = WebProxy.GetDefaultProxy(); All of this is pretty easy to deal with and in my opinion is a way better choice to managing connection settings than having to track this stuff in your own application. Plus if you use default settings, most of the time it's highly likely that the connection settings are already properly configured making further configuration rare.© Rick Strahl, West Wind Technologies, 2005-2011Posted in Windows HTTP .NET FoxPro Tweet (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

Read the article

Silverlight Cream for February 22, 2011 -- #1050

- by Dave Campbell

In this Issue: Robby Ingebretsen, Victor Gaudioso, Andrea Boschin(-2-), Rudi Grobler(-2-), Michael Crump, Deborah Kurata, Dennis Delimarsky, Pete Vickers, Yochay Kiriaty, Peter Kuhn, WindowsPhoneGeek, and Jesse Liberty(-2-). Above the Fold: Silverlight: "Silverlight Simple MVVM Printing" Deborah Kurata WP7: "Creating theme friendly UI in WP7 using OpacityMask" WindowsPhoneGeek Tools: "KAXAML v1.8" Robby Ingebretsen Shoutouts: Peter Foot posted Silverlight for Windows Phone Toolkit–Feb 2011 Rudi Grobler posts his top requested features for WP7, Silverlight, and WCF: vNext ... see you in Seattle, Rudi! From SilverlightCream.com: KAXAML v1.8 Robby Ingebretsen just posted KAXML v1.8 that now supports .NET 4.0, WPF, and Silferlight4 ... go grab it. Learn how to use Blend to create a Data Store, Add Properties to it, etc... Victor Gaudioso has 3 new Silverlight and/or Expression Blend video tutorials up... first is this one on Creating a Data store, adding properties to it, oh... read the title :), Next up is: Send async messages across UserControls or even applications, followed by the latest: Create a Sketchflow Animation using the Sketchflow Animation Panel A base class for threaded Application Services Andrea Boschin continues his IApplicationServices series with this one on a base class he created to develop Application Services that runs a thread. Windows Phone 7 - Part #6: Taking advantage of the phone Andrea Boschin also has part 6 of his series at SilverlightShow on WP7... this one is covering a bunch of items... Capabilities, Launchers/Choosers, and gestures... plus the source for a fun game. {homebrew} Skype for WP7 Rudi Grobler posted about the availability of (some features of) Skype for WP7 being available. The XDA guys have working contacts and the ability to chat going, plus they're looking for poeple to join in... Follow Rudi's link, and let them know you're up for it! Simple menu for your WP7 application Rudi Grobler has another post up about a very simple menu control for WP7 that he produced that is also very easy to use. Attaching a Command to the WP7 Application Bar Michael Crump shows how to bind the application bar to a Relay Command with the use of MVVMLight in 7 Easy Steps :) Silverlight Simple MVVM Printing Deborah Kurata continues her MVVM series with this one on printing what your user sees on the page... but doing so within the MVVM pattern. Enhancing the general Zune experience on Windows Phone 7 with Zune web API Dennis Delimarsky apparently likes the Zune as much as I do, and has ratted out tons of information about the Zune API for use in WP7 apps... and lots of code... Validating input forms in Windows Phone 7 Pete Vickers takes a great detailed spin through validation on the WP7... the rules have changed, but Pete explains with some code examples. Windows Phone Shake Gestures Library Yochay Kiriaty discusses Shake Gestures for the WP7 device and then describes the "Windows Phone Shake Gesture Library" that detects shake gestures in 3D space... and after a great description has the link for downloading. What difference does a sprite sheet make? Peter Kuhn is writing a series at SilverlightShow on XNA for Silverlight Devs that I've highlighted. An outshoot of that is this discussion of the use of sprite sheets and game development. Creating theme friendly UI in WP7 using OpacityMask WindowsPhoneGeek has a new post up today on using Opacity Masks in WP7 to enable using one set of icons for either the dark or light theme.. too cool, you'll wanna check this out! Linq to XML Jesse Liberty continues with Linq with regard to WP7 with this post on Linq to XML... and why XML? crap... I was just saving/loading XML today! :) Lambda–Not as weird as it sounds Jesse Liberty then jumps into Lambda expressions... maybe it's a chance for me to learn WTF the lambdas really do that I use all the time! Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight Silverlight 3 Silverlight 4 Windows Phone MIX10

Read the article

Silverlight Cream for February 10, 2011 -- #1045

- by Dave Campbell

In this Issue: Mark Monster, Jaime Rodriguez, Mark Hopkins, WindowsPhoneGeek, David Anson, Jesse Liberty, Jeremy Likness, Martin Krüger(-2-), Beth Massi, Joost van Schaik, Laurent Bugnion, and Arik Poznanski. Above the Fold: Silverlight: "Parsing the Visual Tree with LINQ" Jeremy Likness WP7: "Silverlight-ready PNG encoder implementation shows one way to use .NET IEnumerables effectively" David Anson Lightswitch: "How to Send Automated Appointments from a LightSwitch Application" Beth Massi Shoutouts: Be sure to visit SilverlightShow... check out their top hits last week: SilverlightShow for Jan 31- Feb 06, 2011 Jaime Rodriguez has a post up that all the WP7 folks will be interested in: FAQ about copy paste functionality in upcoming release From SilverlightCream.com: Make use of WCF FaultContracts in Silverlight clients Mark Monster takes a shot at answering “The remote server returned an error: NotFound” while connecting to a WCF Service problem we all see. Communication between HTML in WebBrowser and Silverlight app Jaime Rodriguez responds to questions he received about communication between HTML and SIlverlight with this post about the bi-directional communication between the control and HTML. WP7 - Real Apps, Real Code Mark Hopkins has a post up about some WP7 starter kits that you can get all the source for and actually download the app from the Marketplace first to see if it interests you! WP7 AboutPrompt in depth WindowsPhoneGeek has this cool post up about the AboutPrompt from the Coding4Fun toolkit in detail... great diagrams showing where all the elements are and code examples with images. Silverlight-ready PNG encoder implementation shows one way to use .NET IEnumerables effectively David Anson describes why he took it upon himself to write his own png encoder for Silverlight... and we all thank him for doing so and providing us with the code! Navigation 101–Cancelling Navigation Jesse Liberty's latest WP7 From Scratch episode is up (number 32), and he's talking about Navigation and how to cancel it if you need to. Parsing the Visual Tree with LINQ Jeremy Likness demonstrates using LINQ to rat out information in the visual tree of your XAML. To Quote Jeremy: "you can easily check for intersections between elements and find any type of element no matter how deep within the tree it is". SpriteAnimationBehavior Martin Krüger has a couple more fun things in the Expression Gallery that I haven't discussed. First up is a behavior that animates up to 999 images and lets you control the FramesPerSecond... great demo on the ExpressionGallery to play with. Second alternative: Storyboard should not start before the Silverlight application is loaded Martin Krüger's latest is a way to programmatically wait for the Loaded event so that you know you can let your animations fly. How to Send Automated Appointments from a LightSwitch Application Beth Massi's latest Lightswitch post follows up her Outlook automation one with sending appointments using the standard iCalendar format... all the code included of course. The case for the Bindable Application Bar for Windows Phone 7 Joost van Schaik posts about a bindable Application Bar for your WP7 apps... grab the code and don't leave home without it :) MVVM Light V4 preview (BL0014) release notes Laurent Bugnion posted an update to MVVMLight to Codeplex a couple days ago. This is an early preview of what he plans on having in version 4, so check out the post for what's new and fun. Search Digg on Windows Phone 7 Arik Poznanski followed up his RSS post from last week with this one on searching Digg on WP7... and he's discussing and providing a utility class for doing it. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight Silverlight 3 Silverlight 4 Windows Phone MIX10

Read the article

Building vs. Buying a Master Data Management Solution

- by david.butler(at)oracle.com

Many organizations prefer to build their own MDM solutions. The argument is that they know their data quality issues and their data better than anyone. Plus a focused solution will cost less in the long run then a vendor supplied general purpose product. This is not unreasonable if you think of MDM as a point solution for a particular data quality problem. But this approach carries significant risk. We now know that organizations achieve significant competitive advantages when they deploy MDM as a strategic enterprise wide solution: with the most common best practice being to deploy a tactical MDM solution and grow it into a full information architecture. A build your own approach most certainly will not scale to a larger architecture unless it is done correctly with the larger solution in mind. It is possible to build a home grown point MDM solution in such a way that it will dovetail into broader MDM architectures. A very good place to start is to use the same basic technologies that Oracle uses to build its own MDM solutions. Start with the Oracle 11g database to create a flexible, extensible and open data model to hold the master data and all needed attributes. The Oracle database is the most flexible, highly available and scalable database system on the market. With its Real Application Clusters (RAC) it can even support the mixed OLTP and BI workloads that represent typical MDM data access profiles. Use Oracle Data Integration (ODI) for batch data movement between applications, MDM data stores, and the BI layer. Use Oracle Golden Gate for more real-time data movement. Use Oracle's SOA Suite for application integration with its: BPEL Process Manager to orchestrate MDM connections to business processes; Identity Management for managing users; WS Manager for managing web services; Business Intelligence Enterprise Edition for analytics; and JDeveloper for creating or extending the MDM management application. Oracle utilizes these technologies to build its MDM Hubs. Customers who build their own MDM solution using these components will easily migrate to Oracle provided MDM solutions when the home grown solution runs out of gas. But, even with a full stack of open flexible MDM technologies, creating a robust MDM application can be a daunting task. For example, a basic MDM solution will need: a set of data access methods that support master data as a service as well as direct real time access as well as batch loads and extracts; a data migration service for initial loads and periodic updates; a metadata management capability for items such as business entity matrixed relationships and hierarchies; a source system management capability to fully cross-reference business objects and to satisfy seemingly conflicting data ownership requirements; a data quality function that can find and eliminate duplicate data while insuring correct data attribute survivorship; a set of data quality functions that can manage structured and unstructured data; a data quality interface to assist with preventing new errors from entering the system even when data entry is outside the MDM application itself; a continuing data cleansing function to keep the data up to date; an internal triggering mechanism to create and deploy change information to all connected systems; a comprehensive role based data security system to control and monitor data access, update rights, and maintain change history; a flexible business rules engine for managing master data processes such as privacy and data movement; a user interface to support casual users and data stewards; a business intelligence structure to support profiling, compliance, and business performance indicators; and an analytical foundation for directly analyzing master data. Oracle's pre-built MDM Hub solutions are full-featured 3-tier Internet applications designed to participate in the full Oracle technology stack or to run independently in other open IT SOA environments. Building MDM solutions from scratch can take years. Oracle's pre-built MDM solutions can bring quality data to the enterprise in a matter of months. But if you must build, at lease build with the world's best technology stack in a way that simplifies the eventual upgrade to Oracle MDM and to the full enterprise wide information architecture that it enables.

Read the article

WEB203 – Jump into Silverlight!… and Become Effective Immediately with Tim Huckaby, Fou

- by Robert Burger

Getting ready for the good stuff. Definitely wish there were more Silverlight and WCF RIA sessions, but this is a start. Was lucky to get a coveted power-enabled seat. Luckily, due to my trustily slow Verizon data card, I can get these notes out amidst a total Internet outage here. This is the second breakout session of the day, and is by far standing-room only. I stepped out before the session started to get a cool Diet COKE and wouldn’t have gotten back in if I didn’t already have a seat. Tim says this is an intro session and that he’s been begging for intro sessions at TechEd for years and that by looking at this audience, he thinks the demand is there. Admittedly, I didn’t know this was an intro session, or I might have gone elsewhere. But, it was the very first Silverlight session, so I had to be here. Tim says he will be providing a very good comprehensive reference application at the end of the presentation. He has just demoed it, and it is a full CRUD-based Sales Manager application based on… AdventureWorks! Session Agenda What it is / How to get started Declarative Programming Layout and Controls, Events and Commands Working with Data Adding Style to Your Application Silverlight… “WPF Light” Why is the download 4.2MB? Because the direct competitor is a 4.2MB download. There is no technical reason it is not the entire framework. It is purely to “be competitive”. Getting Started Get all of the following downloads from www.silverlight.net/getstarted Install VS2010 or Visual Web Developer Express 2010 Install Silverlight 4 Tools for VS2010 Install Expression Blend 4 Install the Silverlight 4 Toolkit Reference Application Features Uses MVVM pattern – a way to move data access code that would normally be inline within the UI and placing it in nice data access libraries Images loaded dynamically from the database, converting GIF to PNG because Silverlight does not support GIF. LINQ to SQL is the data access model WCF is the data provider and is using binary message encoding Declarative Programming XAML replaces code for UI representation Attributes control Layout and Style Event handlers wired-up in XAML Declarative Data Binding Layout Overview Content rendering flows inside of parent Fixed positioning (Canvas) is seldom used Panels are used to house content Margins and Padding over fixed size Panels StackPanel – Arranges child elements into a single line oriented horizontally or vertically Grid – A flexible grid are that consists of rows and columns Canvas – An are where positions are specifically fixed WrapPanel (in Toolkit) – Positions child elements in sequential position left to right and top to bottom. DockPanel (in Toolkit) – Positions child controls within a dockable area Positioning Horizontal and Vertical Alignment Margin – Separates an element from neighboring elements Padding – Enlarges the effective size of an element by a thickness Controls Overview Not all controls created equal Silverlight, as a subset of WPF, so many WPF controls do not exist in the core Siverlight release Silverlight Toolkit continues to add controls, but are released in different quality bands Plenty of good 3rd party controls to fill the gaps Windows Phone 7 is to have 95% of controls available in Silverlight Core and Toolkit. Events and Commands Standard .NET Events Routed Events Commands – based on the ICommand interface – logical action that can be invoked in several ways Adding Style to Your Application Resource Dictionaries – Contains a hash table of key/value pairs. Silverlight can only use Static Resources whereas WPF can also use Dynamic Resources Visual State Manager Silverlight 4 supports Implicit styles ResourceDictionary.MergedDictionaries combines many different file-based resources Downloads

Read the article

Today at Oracle OpenWorld 2012

- by Scott McNeil

We have another full day of great Oracle OpenWorld keynotes, sessions, demos and customer presentations in the Seen and Be Heard threater. Here's a quick run down of what's happening today with Oracle Enterprise Manager 12c: Download the Oracle Enterprise Manager 12c OpenWorld schedule (PDF) Oracle Enterprise Manager Cloud Control 12c (and Private Cloud) General Session Tues 2 Oct, 2012 Time Title Location 11:45 AM - 12:45 PM General Session: Using Oracle Enterprise Manager to Manage Your Own Private Cloud Moscone South - 103* 1:15 PM - 2:15 PM General Session: Breakthrough Efficiency in Private Cloud Infrastructure Moscone West - 3014 Conference Session Tues 2 Oct, 2012 Time Title Location 10:15 AM - 11:15 AM Oracle Exadata/Oracle Enterprise Manager 12c: Journey into Oracle Database Cloud Moscone West - 3018 10:15 AM - 11:15 AM Bulletproof Your Application Upgrades with Secure Data Masking and Subsetting Moscone West - 3020 10:15 AM - 11:15 AM Oracle Enterprise Manager 12c: Architecture Deep Dive, Tips, and Techniques Moscone South - 303 11:45 AM - 12:45 PM RDBMS Forensics: Troubleshooting with Active Session History Moscone West - 3018 11:45 AM - 12:45 PM Building and Operationalizing Your Data Center Environment with Oracle Exalogic Moscone South - 309 11:45 AM - 12:45 PM Securely Building a National Electronic Health Record: Singapore Case Study Westin San Francisco - Concordia 1:15 PM - 2:15 PM Managing Heterogeneous Environments with Oracle Enterprise Manager Moscone West - 3018 1:15 PM - 2:15 PM Complete Oracle WebLogic Server Management with Oracle Enterprise Manager 12c Moscone South - 309 1:15 PM - 2:15 PM Database Lifecycle Management with Oracle Enterprise Manager 12c Moscone West - 3020 1:15 PM - 2:15 PM Best Practices, Key Features, Tips, Techniques for Oracle Enterprise Manager 12c Upgrade Moscone South - 307 1:15 PM - 2:15 PM Enterprise Cloud with CSC’s Foundation Services for Oracle and Oracle Enterprise Manager 12c Moscone South - 236 5:00 PM - 6:00 PM Deep Dive 3-D on Oracle Exadata Management: From Discovery to Deployment to Diagnostics Moscone West - 3018 5:00 PM - 6:00 PM Everything You Need to Know About Monitoring and Troubleshooting Oracle GoldenGate Moscone West - 3005 5:00 PM - 6:00 PM Oracle Enterprise Manager 12c: The Nerve Center of Oracle Cloud Moscone West - 3020 5:00 PM - 6:00 PM Advanced Management of Oracle E-Business Suite with Oracle Enterprise Manager Moscone West - 2016 5:00 PM - 6:00 PM Oracle Enterprise Manager 12c Cloud Control Performance Pages: Falling in Love Again Moscone West - 3014 Hands-on Labs Tues 2 Oct, 2012 Time Title Location 10:15 AM - 12:45 PM Managing the Cloud with Oracle Enterprise Manager 12c Marriott Marquis - Salon 5/6 1:15 PM - 2:15 PM Database Performance Tuning Hands-on Lab Marriott Marquis - Salon 5/6 Scene and Be Heard Theater Session Tues 2 Oct, 2012 Time Title Location 10:30 AM - 10:50 AM Start Small, Grow Big: Hands-On Oracle Private Cloud—A Step-by-Step Guide Moscone South Exhibition Hall - Booth 2407 12:30 PM - 12:50 PM Blue Medora’s Oracle Enterprise Manager Plug-in for VMware vSphere Monitoring Moscone South Exhibition Hall - Booth 2407 Demos Demo Location Application and Infrastructure Testing Moscone West - W-092 Automatic Application and SQL Tuning Moscone South, Left - S-042 Automatic Fault Diagnostics Moscone South, Left - S-036 Automatic Performance Diagnostics Moscone South, Left - S-033 Complete Care for Oracle Using My Oracle Support Moscone South, Left - S-031 Complete Cloud Lifecycle Management Moscone North, Upper Lobby - N-019 Complete Database Lifecycle Management Moscone South, Left - S-030 Comprehensive Infrastructure as a Service via Oracle Enterprise Manager Moscone South, Left - S-045 Data Masking and Data Subsetting Moscone South, Left - S-034 Database Testing with Oracle Real Application Testing Moscone South, Left - S-041 Identity Management Monitoring with Oracle Enterprise Manager Moscone South, Right - S-212 Mission-Critical, SPARC-Powered Infrastructure as a Service Moscone South, Center - S-157 Oracle E-Business Suite, Siebel, JD Edwards, and PeopleSoft Management Moscone West - W-084 Oracle Enterprise Manager Cloud Control 12c Overview Moscone South, Left - S-039 Oracle Enterprise Manager: Complete Data Center Management Moscone South, Left - S-040 Oracle Exadata Management Moscone South, Center - Oracle Exalogic Management Moscone South, Center - Oracle Fusion Applications Management Moscone West - W-018 Oracle Real User Experience Insight Moscone South, Right - S-226 Oracle WebLogic Server Management and Java Diagnostics Moscone South, Right - S-206 Platform as a Service Using Oracle Enterprise Manager Moscone North, Upper Lobby - N-020 SOA Management Moscone South, Right - S-225 Self-Service Application Testing on Private and Public Clouds Moscone West - W-110 Oracle OpenWorld Music Festival New this year is Oracle’s first annual Oracle OpenWorld Musical Festival, featuring some of today's breakthrough musicians from around the country and the world. It's five nights of back-to-back performances in the heart of San Francisco—free to registered attendees. See the lineup Not Heading to OpenWorld—Watch it Live! Stay Connected: Twitter | Facebook | YouTube | Linkedin | Newsletter Download the Oracle Enterprise Manager Cloud Control12c Mobile app

Read the article

Why your Netapp is so slow...

- by Darius Zanganeh

Have you ever wondered why your Netapp FAS box is slow and doesn't perform well at large block workloads? In this blog entry I will give you a little bit of information that will probably help you understand why it’s so slow, why you shouldn't use it for applications that read and write in large blocks like 64k, 128k, 256k ++ etc.. Of course since I work for Oracle at this time, I will show you why the ZS3 storage boxes are excellent choices for these types of workloads. Netapp’s Fundamental Problem The fundamental problem you have running these workloads on Netapp is the backend block size of their WAFL file system. Every application block on a Netapp FAS ends up in a 4k chunk on a disk. Reference: Netapp TR-3001 Whitepaper Netapp has proven this lacking large block performance fact in at least two different ways. They have NEVER posted an SPC-2 Benchmark yet they have posted SPC-1 and SPECSFS, both recently. In 2011 they purchased Engenio to try and fill this GAP in their portfolio. Block Size Matters So why does block size matter anyways? Many applications use large block chunks of data especially in the Big Data movement. Some examples are SAS Business Analytics, Microsoft SQL, Hadoop HDFS is even 64MB! Now let me boil this down for you. If an application such MS SQL is writing data in a 64k chunk then before Netapp actually writes it on disk it will have to split it into 16 different 4k writes and 16 different disk IOPS. When the application later goes to read that 64k chunk the Netapp will have to again do 16 different disk IOPS. In comparison the ZS3 Storage Appliance can write in variable block sizes ranging from 512b to 1MB. So if you put the same MSSQL database on a ZS3 you can set the specific LUNs for this database to 64k and then when you do an application read/write it requires only a single disk IO. That is 16x faster! But, back to the problem with your Netapp, you will VERY quickly run out of disk IO and hit a wall. Now all arrays will have some fancy pre fetch algorithm and some nice cache and maybe even flash based cache such as a PAM card in your Netapp but with large block workloads you will usually blow through the cache and still need significant disk IO. Also because these datasets are usually very large and usually not dedupable they are usually not good candidates for an all flash system. You can do some simple math in excel and very quickly you will see why it matters. Here are a couple of READ examples using SAS and MSSQL. Assume these are the READ IOPS the application needs even after all the fancy cache and algorithms. Here is an example with 128k blocks. Notice the numbers of drives on the Netapp! Here is an example with 64k blocks You can easily see that the Oracle ZS3 can do dramatically more work with dramatically less drives. This doesn't even take into account that the ONTAP system will likely run out of CPU way before you get to these drive numbers so you be buying many more controllers. So with all that said, lets look at the ZS3 and why you should consider it for any workload your running on Netapp today. ZS3 World Record Price/Performance in the SPC-2 benchmark ZS3-2 is #1 in Price Performance $12.08ZS3-2 is #3 in Overall Performance 16,212 MBPS Note: The number one overall spot in the world is held by an AFA 33,477 MBPS but at a Price Performance of $29.79. A customer could purchase 2 x ZS3-2 systems in the benchmark with relatively the same performance and walk away with $600,000 in their pocket.

Search Results

Search found 54214 results on 2169 pages for 'facebook application fan'.

Page 500/2169 | < Previous Page | 496 497 498 499 500 501 502 503 504 505 506 507 | Next Page >

- by SuperUserMan

- by TK Kocheran

- by Dany Khalife

- by Tim S

- by rush

- by Davy8

- by George Tomlinson

- by Simurr

- by João Angelo

- by Brian

- by [email protected]

- by ToStringTheory

- by Michael Stephenson

- by kaushalparik27

- by Rajesh Sharma

- by Claudia Costa

- by John Abraham

- by Rick Strahl

- by Dave Campbell

- by Dave Campbell

- by david.butler(at)oracle.com

- by Robert Burger

- by Scott McNeil

- by Darius Zanganeh

< Previous Page | 496 497 498 499 500 501 502 503 504 505 506 507 | Next Page >