oracle b2b 11g practice - Page 501

How to build Open JavaFX for Android.

- by PictureCo

Here's a short recipe for baking JavaFX for Android dalvik. We will need just a few ingredients but each one requires special care. So let's get down to the business. SourcesThe first ingredient is an open JavaFX repository. This should be piece of cake. As always there's a catch. You probably know that dalvik is jdk6 compatible and also that certain APIs are missing comparing to good old java vm from Oracle. Fortunately there is a repository which is a backport of regular OpenJFX to jdk7 and going from jdk7 to jdk6 is possible. The first thing to do is to clone or download the repository from https://bitbucket.org/narya/jfx78. Main page of the project says "It works in some cases" so we will presume that it will work in most cases As I've said dalvik vm misses some APIs which would lead to a build failures. To get them use another compatibility repository which is available on GitHub https://github.com/robovm/robovm-jfx78-compat. Download the zip and unzip sources into jfx78/modules/base.We need also a javafx binary stubs. Use jfxrt.jar from jdk8.The last thing to download are freetype sources from http://freetype.org. These will be necessary for native font rendering. Toolchain setup I have to point out that these instructions were tested only on linux. I suppose they will work with minimal changes also on Mac OS. I also presume that you were able to build open JavaFX. That means all tools like ant, gradle, gcc and jdk8 have been installed and are working all right. In addition to this you will need to download and install jdk7, Android SDK and Android NDK for native code compilation. Installing all of them will take some time. Don't forget to put them in your path. export ANDROID_SDK=/opt/android-sdk-linux export ANDROID_NDK=/opt/android-ndk-r9b export JAVA_HOME=/opt/jdk1.7.0 export PATH=$JAVA_HOME/bin:$ANDROID_SDK/tools:$ANDROID_SDK/platform-tools:$ANDROID_NDK FreetypeUnzip freetype release sources first. We will have to cross compile them for arm. Firstly we will create a standalone toolchain for cross compiling installed in ~/work/ndk-standalone-19. $ANDROID_NDK/build/tools/make-standalone-toolchain.sh --platform=android-19 --install-dir=~/work/ndk-standalone-19 After the standalone toolchain has been created cross compile freetype with following script: export TOOLCHAIN=~/work/freetype/ndk-standalone-19 export PATH=$TOOLCHAIN/bin:$PATH export FREETYPE=`pwd` ./configure --host=arm-linux-androideabi --prefix=$FREETYPE/install --without-png --without-zlib --enable-shared sed -i 's/\-version\-info \$(version_info)/-avoid-version/' builds/unix/unix-cc.mk make make install It will compile and install freetype library into $FREETYPE/install. We will link to this install dir later on. It would be possible also to link openjfx font support dynamically against skia library available on Android which already contains freetype. It creates smaller result but can have compatibility problems. Patching Download patches javafx-android-compat.patch + android-tools.patch and patch jfx78 repository. I recommend to have look at patches. First one android-compat.patch updates openjfx build script, removes dependency on SharedSecret classes and updates LensLogger to remove dependency on jdk specific PlatformLogger. Second one android-tools.patch creates helper script in android-tools. The script helps to setup javaFX Android projects. Building Now is time to try the build. Run following script: JAVA_HOME=/opt/jdk1.7.0 JDK_HOME=/opt/jdk1.7.0 ANDROID_SDK=/opt/android-sdk-linux ANDROID_NDK=/opt/android-ndk-r9b PATH=$JAVA_HOME/bin:$ANDROID_SDK/tools:$ANDROID_SDK/platform-tools:$ANDROID_NDK:$PATH gradle -PDEBUG -PDALVIK_VM=true -PBINARY_STUB=~/work/binary_stub/linux/rt/lib/ext/jfxrt.jar \ -PFREETYPE_DIR=~/work/freetype/install -PCOMPILE_TARGETS=android If everything went all right the output is in build/android-sdk Create first JavaFX Android project Use gradle script int android-tools. The script sets the project structure for you. Following command creates Android HelloWorld project which links to a freshly built javafx runtime and to a HelloWorld application. NAME is a name of Android project. DIR where to create our first project. PACKAGE is package name required by Android. It has nothing to do with a packaging of javafx application. JFX_SDK points to our recently built runtime. JFX_APP points to dist directory of javafx application. (where all application jars sit) JFX_MAIN is fully qualified name of a main class. gradle -PDEBUG -PDIR=/home/user/work -PNAME=HelloWorld -PPACKAGE=com.helloworld \ -PJFX_SDK=/home/user/work/jfx78/build/android-sdk -PJFX_APP=/home/user/NetBeansProjects/HelloWorld/dist \ -PJFX_MAIN=com.helloworld.HelloWorld createProject Now cd to the created project and use it like any other android project. ant clean, debug, uninstall, installd will work. I haven't tried it from any IDE Eclipse nor Netbeans. Special thanks to Stefan Fuchs and Daniel Zwolenski for the repositories used in this blog post.

Read the article

Talking JavaOne with Rock Star Martijn Verburg

- by Janice J. Heiss

JavaOne Rock Stars, conceived in 2005, are the top-rated speakers at each JavaOne Conference. They are awarded by their peers, who, through conference surveys, recognize them for their outstanding sessions and speaking ability. Over the years many of the world’s leading Java developers have been so recognized. Martijn Verburg has, in recent years, established himself as an important mover and shaker in the Java community. His “Diabolical Developer” session at the JavaOne 2011 Conference got people’s attention by identifying some of the worst practices Java developers are prone to engage in. Among other things, he is co-leader and organizer of the thriving London Java User Group (JUG) which has more than 2,500 members, co-represents the London JUG on the Executive Committee of the Java Community Process, and leads the global effort for the Java User Group “Adopt a JSR” and “Adopt OpenJDK” programs. Career highlights include overhauling technology stacks and SDLC practices at Mizuho International, mentoring Oracle on technical community management, and running off shore development teams for AIG. He is currently CTO at jClarity, a start-up focusing on automating optimization for Java/JVM related technologies, and Product Advisor at ZeroTurnaround. He co-authored, with Ben Evans, "The Well-Grounded Java Developer" published by Manning and, as a leading authority on technical team optimization, he is in high demand at major software conferences.Verburg is participating in five sessions, a busy man indeed. Here they are: CON6152 - Modern Software Development Antipatterns (with Ben Evans) UGF10434 - JCP and OpenJDK: Using the JUGs’ “Adopt” Programs in Your Group (with Csaba Toth) BOF4047 - OpenJDK Building and Testing: Case Study—Java User Group OpenJDK Bugathon (with Ben Evans and Cecilia Borg) BOF6283 - 101 Ways to Improve Java: Why Developer Participation Matters (with Bruno Souza and Heather Vancura-Chilson) HOL6500 - Finding and Solving Java Deadlocks (with Heinz Kabutz, Kirk Pepperdine, Ellen Kraffmiller and Henri Tremblay) When I asked Verburg about the biggest mistakes Java developers tend to make, he listed three: A lack of communication -- Software development is far more a social activity than a technical one; most projects fail because of communication issues and social dynamics, not because of a bad technical decision. Sadly, many developers never learn this lesson. No source control -- Developers simply storing code in local filesystems and emailing code in order to integrate Design-driven Design -- The need for some developers to cram every design pattern from the Gang of Four (GoF) book into their source code All of which raises the question: If these practices are so bad, why do developers engage in them? “I've seen a wide gamut of reasons,” said Verburg, who lists them as: * They were never taught at high school/university that their bad habits were harmful.* They weren't mentored in their first professional roles.* They've lost passion for their craft.* They're being deliberately malicious!* They think software development is a technical activity and not a social one.* They think that they'll be able to tidy it up later.A couple of key confusions and misconceptions beset Java developers, according to Verburg. “With Java and the JVM in particular I've seen a couple of trends,” he remarked. “One is that developers think that the JVM is a magic box that will clean up their memory, make their code run fast, as well as make them cups of coffee. The JVM does help in a lot of cases, but bad code can and will still lead to terrible results! The other trend is to try and force Java (the language) to do something it's not very good at, such as rapid web development. So you get a proliferation of overly complex frameworks, libraries and techniques trying to get around the fact that Java is a monolithic, statically typed, compiled, OO environment. It's not a Golden Hammer!”I asked him about the keys to running a good Java User Group. “You need to have a ‘Why,’” he observed. “Many user groups know what they do (typically, events) and how they do it (the logistics), but what really drives users to join your group and to stay is to give them a purpose. For example, within the LJC we constantly talk about the ‘Why,’ which in our case is several whys:* Re-ignite the passion that developers have for their craft* Raise the bar of Java developers in London* We want developers to have a voice in deciding the future of Java* We want to inspire the next generation of tech leaders* To bring the disparate tech groups in London together* So we could learn from each other* We believe that the Java ecosystem forms a cornerstone of our society today -- we want to protect that for the futureLooking ahead to Java 8 Verburg expressed excitement about Lambdas. “I cannot wait for Lambdas,” he enthused. “Brian Goetz and his group are doing a great job, especially given some of the backwards compatibility that they have to maintain. It's going to remove a lot of boiler plate and yet maintain readability, plus enable massive scaling.”Check out Martijn Verburg at JavaOne if you get a chance, and, stay tuned for a longer interview yours truly did with Martijn to be publish on otn/java some time after JavaOne.

Read the article

Parent Objects

- by Ali Bahrami

Support for Parent Objects was added in Solaris 11 Update 1. The following material is adapted from the PSARC arc case, and the Solaris Linker and Libraries Manual. A "plugin" is a shared object, usually loaded via dlopen(), that is used by a program in order to allow the end user to add functionality to the program. Examples of plugins include those used by web browsers (flash, acrobat, etc), as well as mdb and elfedit modules. The object that loads the plugin at runtime is called the "parent object". Unlike most object dependencies, the parent is not identified by name, but by its status as the object doing the load. Historically, building a good plugin is has been more complicated than it should be: A parent and its plugin usually share a 2-way dependency: The plugin provides one or more routines for the parent to call, and the parent supplies support routines for use by the plugin for things like memory allocation and error reporting. It is a best practice to build all objects, including plugins, with the -z defs option, in order to ensure that the object specifies all of its dependencies, and is self contained. However: The parent is usually an executable, which cannot be linked to via the usual library mechanisms provided by the link editor. Even if the parent is a shared object, which could be a normal library dependency to the plugin, it may be desirable to build plugins that can be used by more than one parent, in which case embedding a dependency NEEDED entry for one of the parents is undesirable. The usual way to build a high quality plugin with -z defs uses a special mapfile provided by the parent. This mapfile defines the parent routines, specifying the PARENT attribute (see example below). This works, but is inconvenient, and error prone. The symbol table in the parent already describes what it makes available to plugins — ideally the plugin would obtain that information directly rather than from a separate mapfile. The new -z parent option to ld allows a plugin to link to the parent and access the parent symbol table. This differs from a typical dependency: No NEEDED record is created. The relationship is recorded as a logical connection to the parent, rather than as an explicit object name However, it operates in the same manner as any other dependency in terms of making symbols available to the plugin. When the -z parent option is used, the link-editor records the basename of the parent object in the dynamic section, using the new tag DT_SUNW_PARENT. This is an informational tag, which is not used by the runtime linker to locate the parent, but which is available for diagnostic purposes. The ld(1) manpage documentation for the -z parent option is: -z parent=object Specifies a "parent object", which can be an executable or shared object, against which to link the output object. This option is typically used when creating "plugin" shared objects intended to be loaded by an executable at runtime via the dlopen() function. The symbol table from the parent object is used to satisfy references from the plugin object. The use of the -z parent option makes symbols from the object calling dlopen() available to the plugin. Example For this example, we use a main program, and a plugin. The parent provides a function named parent_callback() for the plugin to call. The plugin provides a function named plugin_func() to the parent: % cat main.c #include <stdio.h> #include <dlfcn.h> #include <link.h> void parent_callback(void) { printf("plugin_func() has called parent_callback()\n"); } int main(int argc, char **argv) { typedef void plugin_func_t(void); void *hdl; plugin_func_t *plugin_func; if (argc != 2) { fprintf(stderr, "usage: main plugin\n"); return (1); } if ((hdl = dlopen(argv[1], RTLD_LAZY)) == NULL) { fprintf(stderr, "unable to load plugin: %s\n", dlerror()); return (1); } plugin_func = (plugin_func_t *) dlsym(hdl, "plugin_func"); if (plugin_func == NULL) { fprintf(stderr, "unable to find plugin_func: %s\n", dlerror()); return (1); } (*plugin_func)(); return (0); } % cat plugin.c #include <stdio.h> extern void parent_callback(void); void plugin_func(void) { printf("parent has called plugin_func() from plugin.so\n"); parent_callback(); } Building this in the traditional manner, without -zdefs: % cc -o main main.c % cc -G -o plugin.so plugin.c % ./main ./plugin.so parent has called plugin_func() from plugin.so plugin_func() has called parent_callback() As noted above, when building any shared object, the -z defs option is recommended, in order to ensure that the object is self contained and specifies all of its dependencies. However, the use of -z defs prevents the plugin object from linking due to the unsatisfied symbol from the parent object: % cc -zdefs -G -o plugin.so plugin.c Undefined first referenced symbol in file parent_callback plugin.o ld: fatal: symbol referencing errors. No output written to plugin.so A mapfile can be used to specify to ld that the parent_callback symbol is supplied by the parent object. % cat plugin.mapfile $mapfile_version 2 SYMBOL_SCOPE { global: parent_callback { FLAGS = PARENT }; }; % cc -zdefs -Mplugin.mapfile -G -o plugin.so plugin.c However, the -z parent option to ld is the most direct solution to this problem, allowing the plugin to actually link against the parent object, and obtain the available symbols from it. An added benefit of using -z parent instead of a mapfile, is that the name of the parent object is recorded in the dynamic section of the plugin, and can be displayed by the file utility: % cc -zdefs -zparent=main -G -o plugin.so plugin.c % elfdump -d plugin.so | grep PARENT [0] SUNW_PARENT 0xcc main % file plugin.so plugin.so: ELF 32-bit LSB dynamic lib 80386 Version 1, parent main, dynamically linked, not stripped % ./main ./plugin.so parent has called plugin_func() from plugin.so plugin_func() has called parent_callback() We can also observe this in elfedit plugins on Solaris systems running Solaris 11 Update 1 or newer: % file /usr/lib/elfedit/dyn.so /usr/lib/elfedit/dyn.so: ELF 32-bit LSB dynamic lib 80386 Version 1, parent elfedit, dynamically linked, not stripped, no debugging information available Related Other Work The GNU ld has an option named --just-symbols that can be used in a similar manner: --just-symbols=filename Read symbol names and their addresses from filename, but do not relocate it or include it in the output. This allows your output file to refer symbolically to absolute locations of memory defined in other programs. You may use this option more than once. -z parent is a higher level operation aimed specifically at simplifying the construction of high quality plugins. Although it employs the same operation, it differs from --just symbols in 2 significant ways: There can only be one parent. The parent is recorded in the created object, and can be displayed by 'file', or other similar tools.

Read the article

Optimizing AES modes on Solaris for Intel Westmere

- by danx

Optimizing AES modes on Solaris for Intel Westmere Review AES is a strong method of symmetric (secret-key) encryption. It is a U.S. FIPS-approved cryptographic algorithm (FIPS 197) that operates on 16-byte blocks. AES has been available since 2001 and is widely used. However, AES by itself has a weakness. AES encryption isn't usually used by itself because identical blocks of plaintext are always encrypted into identical blocks of ciphertext. This encryption can be easily attacked with "dictionaries" of common blocks of text and allows one to more-easily discern the content of the unknown cryptotext. This mode of encryption is called "Electronic Code Book" (ECB), because one in theory can keep a "code book" of all known cryptotext and plaintext results to cipher and decipher AES. In practice, a complete "code book" is not practical, even in electronic form, but large dictionaries of common plaintext blocks is still possible. Here's a diagram of encrypting input data using AES ECB mode: Block 1 Block 2 PlainTextInput PlainTextInput | | | | \/ \/ AESKey-->(AES Encryption) AESKey-->(AES Encryption) | | | | \/ \/ CipherTextOutput CipherTextOutput Block 1 Block 2 What's the solution to the same cleartext input producing the same ciphertext output? The solution is to further process the encrypted or decrypted text in such a way that the same text produces different output. This usually involves an Initialization Vector (IV) and XORing the decrypted or encrypted text. As an example, I'll illustrate CBC mode encryption: Block 1 Block 2 PlainTextInput PlainTextInput | | | | \/ \/ IV >----->(XOR) +------------->(XOR) +---> . . . . | | | | | | | | \/ | \/ | AESKey-->(AES Encryption) | AESKey-->(AES Encryption) | | | | | | | | | \/ | \/ | CipherTextOutput ------+ CipherTextOutput -------+ Block 1 Block 2 The steps for CBC encryption are: Start with a 16-byte Initialization Vector (IV), choosen randomly. XOR the IV with the first block of input plaintext Encrypt the result with AES using a user-provided key. The result is the first 16-bytes of output cryptotext. Use the cryptotext (instead of the IV) of the previous block to XOR with the next input block of plaintext Another mode besides CBC is Counter Mode (CTR). As with CBC mode, it also starts with a 16-byte IV. However, for subsequent blocks, the IV is just incremented by one. Also, the IV ix XORed with the AES encryption result (not the plain text input). Here's an illustration: Block 1 Block 2 PlainTextInput PlainTextInput | | | | \/ \/ AESKey-->(AES Encryption) AESKey-->(AES Encryption) | | | | \/ \/ IV >----->(XOR) IV + 1 >---->(XOR) IV + 2 ---> . . . . | | | | \/ \/ CipherTextOutput CipherTextOutput Block 1 Block 2 Optimization Which of these modes can be parallelized? ECB encryption/decryption can be parallelized because it does more than plain AES encryption and decryption, as mentioned above. CBC encryption can't be parallelized because it depends on the output of the previous block. However, CBC decryption can be parallelized because all the encrypted blocks are known at the beginning. CTR encryption and decryption can be parallelized because the input to each block is known--it's just the IV incremented by one for each subsequent block. So, in summary, for ECB, CBC, and CTR modes, encryption and decryption can be parallelized with the exception of CBC encryption. How do we parallelize encryption? By interleaving. Usually when reading and writing data there are pipeline "stalls" (idle processor cycles) that result from waiting for memory to be loaded or stored to or from CPU registers. Since the software is written to encrypt/decrypt the next data block where pipeline stalls usually occurs, we can avoid stalls and crypt with fewer cycles. This software processes 4 blocks at a time, which ensures virtually no waiting ("stalling") for reading or writing data in memory. Other Optimizations Besides interleaving, other optimizations performed are Loading the entire key schedule into the 128-bit %xmm registers. This is done once for per 4-block of data (since 4 blocks of data is processed, when present). The following is loaded: the entire "key schedule" (user input key preprocessed for encryption and decryption). This takes 11, 13, or 15 registers, for AES-128, AES-192, and AES-256, respectively The input data is loaded into another %xmm register The same register contains the output result after encrypting/decrypting Using SSSE 4 instructions (AESNI). Besides the aesenc, aesenclast, aesdec, aesdeclast, aeskeygenassist, and aesimc AESNI instructions, Intel has several other instructions that operate on the 128-bit %xmm registers. Some common instructions for encryption are: pxor exclusive or (very useful), movdqu load/store a %xmm register from/to memory, pshufb shuffle bytes for byte swapping, pclmulqdq carry-less multiply for GCM mode Combining AES encryption/decryption with CBC or CTR modes processing. Instead of loading input data twice (once for AES encryption/decryption, and again for modes (CTR or CBC, for example) processing, the input data is loaded once as both AES and modes operations occur at in the same function Performance Everyone likes pretty color charts, so here they are. I ran these on Solaris 11 running on a Piketon Platform system with a 4-core Intel Clarkdale processor @3.20GHz. Clarkdale which is part of the Westmere processor architecture family. The "before" case is Solaris 11, unmodified. Keep in mind that the "before" case already has been optimized with hand-coded Intel AESNI assembly. The "after" case has combined AES-NI and mode instructions, interleaved 4 blocks at-a-time. « For the first table, lower is better (milliseconds). The first table shows the performance improvement using the Solaris encrypt(1) and decrypt(1) CLI commands. I encrypted and decrypted a 1/2 GByte file on /tmp (swap tmpfs). Encryption improved by about 40% and decryption improved by about 80%. AES-128 is slighty faster than AES-256, as expected. The second table shows more detail timings for CBC, CTR, and ECB modes for the 3 AES key sizes and different data lengths. » The results shown are the percentage improvement as shown by an internal PKCS#11 microbenchmark. And keep in mind the previous baseline code already had optimized AESNI assembly! The keysize (AES-128, 192, or 256) makes little difference in relative percentage improvement (although, of course, AES-128 is faster than AES-256). Larger data sizes show better improvement than 128-byte data. Availability This software is in Solaris 11 FCS. It is available in the 64-bit libcrypto library and the "aes" Solaris kernel module. You must be running hardware that supports AESNI (for example, Intel Westmere and Sandy Bridge, microprocessor architectures). The easiest way to determine if AES-NI is available is with the isainfo(1) command. For example, $ isainfo -v 64-bit amd64 applications pclmulqdq aes sse4.2 sse4.1 ssse3 popcnt tscp ahf cx16 sse3 sse2 sse fxsr mmx cmov amd_sysc cx8 tsc fpu 32-bit i386 applications pclmulqdq aes sse4.2 sse4.1 ssse3 popcnt tscp ahf cx16 sse3 sse2 sse fxsr mmx cmov sep cx8 tsc fpu No special configuration or setup is needed to take advantage of this software. Solaris libraries and kernel automatically determine if it's running on AESNI-capable machines and execute the correctly-tuned software for the current microprocessor. Summary Maximum throughput of AES cipher modes can be achieved by combining AES encryption with modes processing, interleaving encryption of 4 blocks at a time, and using Intel's wide 128-bit %xmm registers and instructions. References "Block cipher modes of operation", Wikipedia Good overview of AES modes (ECB, CBC, CTR, etc.) "Advanced Encryption Standard", Wikipedia "Current Modes" describes NIST-approved block cipher modes (ECB,CBC, CFB, OFB, CCM, GCM)

Read the article

BIP and Mapviewer Mash Up I

- by Tim Dexter

I was out in Yellowstone last week soaking up various wildlife and a bit too much rain ... good to be back until the 95F heat yesterday. Taking a little break from the Excel templates; the dev folks are planing an Excel patch in the next week or so that will add a mass of new functionality. At the risk of completely mis leading you I'm going to hang back a while. What I have written so far holds true and will continue to do so. This week, I have been mostly eating 'mapviewer' ... answers on a post card please, TV show and character. I had a request to show how BIP can call mapviewer and render a dynamic map in an output. So I hit the books and colleagues for some answers. Mapviewer is Oracle's geographic information system, hereby known as GIS. I use it a lot in our BIEE demos where the interaction with the maps is very impressive. Need a map of California and its congressional districts? I have contacts; Jerry and David with their little black box of maps. Once in my possession I can build highly interactive, clickable maps that allow the user to drill into more information using a very friendly interface driving BIEE content and navigation. But what about maps in BIP output? Bryan Wise, who has written some articles on this blog did some work a while back with the PL/SQL API interface. The extract for the report called a function that in turn called the mapviewer server, passing a set of mapping requirements, it then returned a URL to a cached copy of that map. Easy to then have BIP render that image. Thats still very doable. You need to install a couple of packages and then load the mapviewer java APIs into the database. Then you can write your function to the APIs. A little involved? Maybe, but the database is doing all the heavy lifting for you. I thought I would investigate another method for getting the maps back into BIP. There is a URL interface you can call, this involves building an XML message to be passed to the mapviewer server. It's pretty straightforward to use on the mapviewer side. On the BIP side things are little more tricksy. After some unexpected messing about I finally got the ubiquitous Hello World map to render using the URL method. Not the most exciting map in the world, lots of ocean and a rather long URL to get it to render. http://127.0.0.1:9704/mapviewer/omserver?xml_request=%3Cmap_request%20title=%22Hello%20World%22%20datasource=%22cagis%22%20format=%22GIF_STREAM%22/%3E Notice all of the encoding in the URL string to handle the spaces, quotes, etc. All necessary to get BIP to make the call to the mapviewer server correctly without truncating the URL if it hits a real space rather than a %20. With that in mind constructing the URL was pretty simple. I'm not going to get into the content of the URL too much, for that you need to bone up on the mapviewer XML API. Check out the home page here and the documentation here. To make the template portable I used the standard CURRENT_SERVER_URL parameter from the BIP server and declared that in my template. <?param@begin:CURRENT_SERVER_URL;'myserver'?> Ignore the 'myserver', that was just a dummy value for testing at runtime it will resolve to: 'http://yourserver:port/xmlpserver' Not quite what we need as mapviewer has its own server path, in my case I needed 'mapviewer/omserver?xml_request=' as the fixed path to the mapviewer request URL. A little concatenation and substringing later I came up with <?param@begin:mURL;concat(substring($CURRENT_SERVER_URL,1,22),'mapviewer/omserver?xml_request=')?> Thats the basic URL that I can then build on. To get the Hello World map I need to add the following: <map_request title="Hello World" datasource="cagis" format="GIF_STREAM"/> Those angle brackets were the source of my headache, BIPs XSLT engine was attempting to process them rather than just pass them. Hok Min to the rescue ... again. I owe him lunch when I get out to HQ again! To solve the problem, I needed to escape all the characters and white space and then use native XSL to assign the string to a parameter. <xsl:param xdofo:ctx="begin"name="pXML">%3Cmap_request%20title=%22Hello%20World%22 %20datasource=%22cagis%22%20format=%22GIF_STREAM%22/%3E</xsl:param> I did not need to assign it to a parameter but I felt that if I were going to do anything more serious than Hello World like plotting points of interest on the map. I would need to dynamically build the URL, so using a set of parameters or variables that I then concatenated would be easier. Now I had the initial server string and the request all I then did was combine the two using a concat: concat($mURL,$pXML) Embedding that into an image tag: <fo:external-graphic src="url({concat($mURL,$pXML)})"/> and I was done. Notice the curly braces to get the concat evaluated prior to the image call. As you will see next time, building the XML message to go onto the URL can get quite complex but I have used it with some data. Ultimately, it would be easier to build an extension to BIP to handle the data to be plotted, it would then build the XML message, call mapviewer and return a URL to the map image for BIP to render. More on that next time ...

Read the article

WebCenter Content shared folders for clustering

- by Kyle Hatlestad

When configuring a WebCenter Content (WCC) cluster, one of the things which makes it unique from some other WebLogic Server applications is its requirement for a shared file system. This is actually not any different then 10g and previous versions of UCM when it ran directly on a JVM. And while it is simple enough to say it needs a shared file system, there are some crucial details in how those directories are configured. And if they aren't followed, you may result in some unwanted behavior. This blog post will go into the details on how exactly the file systems should be split and what options are required. Beyond documents being stored on the file system and/or database and metadata being stored in the database along with other structured data, there is other information being read and written to on the file system. Information such as user profile preferences, workflow item state information, metadata profiles, and other details are stored in files. In addition, for certain processes within WCC, each of the nodes needs to know what the other nodes are doing so they don’t step on each other. WCC keeps track of this through the use of lock files on the file system. Because of this, each node of the WCC must have access to the same file system just as they have access to the same database. WCC uses its own locking mechanism using files, so it also needs to have access to those files without file attribute caching and without locking being done by the client (node). If one of the nodes accesses a certain status file and it happens to be cached, that node might attempt to run a process which another node is already working on. Or if a particular file is locked by one of the node clients, this could interfere with access by another node. Unfortunately, when disabling file attribute caching on the file share, this can impact performance. So it is important to only disable caching and locking on the particular folders which require it. When configuring WebCenter Content after deploying the domain, it asks for 3 different directories: Content Server Instance Folder, Native File Repository Location, and Weblayout Folder. And starting in PS5, it now asks for the User Profile Folder. Even if you plan on storing the content in the database, you still need to establish a Native File (Vault) and Weblayout directories. These will be used for handling temporary files, cached files, and files used to deliver the UI. For these directories, the only folder which needs to have the file attribute caching and locking disabled is the ‘Content Server Instance Folder’. So when establishing this share through NFS or a clustered file system, be sure to specify those options. For instance, if creating the share through NFS, use the ‘noac’ and ‘nolock’ options for the mount options. For the other directories, caching and locking should be enabled to provide best performance to those locations. These directory path configurations are contained within the <domain dir>\ucm\cs\bin\intradoc.cfg file: #Server System PropertiesIDC_Id=UCM_server1 #Server Directory Variables IdcHomeDir=/u01/fmw/Oracle_ECM1/ucm/idc/ FmwDomainConfigDir=/u01/fmw/user_projects/domains/base_domain/config/fmwconfig/ AppServerJavaHome=/u01/jdk/jdk1.6.0_22/jre/ AppServerJavaUse64Bit=true IntradocDir=/mnt/share_no_cache/base_domain/ucm/cs/ VaultDir=/mnt/share_with_cache/ucm/cs/vault/ WeblayoutDir=/mnt/share_with_cache/ucm/cs/weblayout/ #Server Classpath variables #Additional Variables #NOTE: UserProfilesDir is only available in PS5 – 11.1.1.6.0UserProfilesDir=/mnt/share_with_cache/ucm/cs/data/users/profiles/ In addition to these folder configurations, it’s also recommended to move node-specific folders to local disk to avoid unnecessary traffic to the shared directory. So on each node, go to <domain dir>\ucm\cs\bin\intradoc.cfg and add these additional configuration entries: VaultTempDir=<domain dir>/ucm/<cs>/vault/~temp/ TraceDirectory=<domain dir>/servers/<UCM_serverN>/logs/EventDirectory=<domain dir>/servers/<UCM_serverN>/logs/event/ And of course, don’t forget the cluster-specific configuration values to add as well. These can be added through Admin Server -> General Configuration -> Additional Configuration Variables or directly in the <IntradocDir>/config/config.cfg file: ArchiverDoLocks=true DisableSharedCacheChecking=true ServiceAllowRetry=true (use only with Oracle RAC Database)PublishLockTimeout=300000 (time can vary depending on publishing time and number of nodes) For additional information and details on clustering configuration, I highly recommend reviewing document [1209496.1] on the support site. In addition, there is a great step-by-step guide on setting up a WebCenter Content cluster [1359930.1].

Read the article

Goto for the Java Programming Language

- by darcy

Work on JDK 8 is well-underway, but we thought this late-breaking JEP for another language change for the platform couldn't wait another day before being published. Title: Goto for the Java Programming Language Author: Joseph D. Darcy Organization: Oracle. Created: 2012/04/01 Type: Feature State: Funded Exposure: Open Component: core/lang Scope: SE JSR: 901 MR Discussion: compiler dash dev at openjdk dot java dot net Start: 2012/Q2 Effort: XS Duration: S Template: 1.0 Reviewed-by: Duke Endorsed-by: Edsger Dijkstra Funded-by: Blue Sun Corporation Summary Provide the benefits of the time-testing goto control structure to Java programs. The Java language has a history of adding new control structures over time, the assert statement in 1.4, the enhanced for-loop in 1.5,and try-with-resources in 7. Having support for goto is long-overdue and simple to implement since the JVM already has goto instructions. Success Metrics The goto statement will allow inefficient and verbose recursive algorithms and explicit loops to be replaced with more compact code. The effort will be a success if at least twenty five percent of the JDK's explicit loops are replaced with goto's. Coordination with IDE vendors is expected to help facilitate this goal. Motivation The goto construct offers numerous benefits to the Java platform, from increased expressiveness, to more compact code, to providing new programming paradigms to appeal to a broader demographic. In JDK 8, there is a renewed focus on using the Java platform on embedded devices with more modest resources than desktop or server environments. In such contexts, static and dynamic memory footprint is a concern. One significant component of footprint is the code attribute of class files and certain classes of important algorithms can be expressed more compactly using goto than using other constructs, saving footprint. For example, to implement state machines recursively, some parties have asked for the JVM to support tail calls, that is, to perform a complex transformation with security implications to turn a method call into a goto. Such complicated machinery should not be assumed for an embedded context. A better solution is just to expose to the programmer the desired functionality, goto. The web has familiarized users with a model of traversing links among different HTML pages in a free-form fashion with some state being maintained on the side, such as login credentials, to effect behavior. This is exactly the programming model of goto and code. While in the past this has been derided as leading to "spaghetti code," spaghetti is a tasty and nutritious meal for programmers, unlike quiche. The invokedynamic instruction added by JSR 292 exposes the JVM's linkage operation to programmers. This is a low-level operation that can be leveraged by sophisticated programmers. Likewise, goto is a also a low-level operation that should not be hidden from programmers who can use more efficient idioms. Some may object that goto was consciously excluded from the original design of Java as one of the removed feature from C and C++. However, the designers of the Java programming languages have revisited these removals before. The enum construct was also left out only to be added in JDK 5 and multiple inheritance was left out, only to be added back by the virtual extension method methods of Project Lambda. As a living language, the needs of the growing Java community today should be used to judge what features are needed in the platform tomorrow; the language should not be forever bound by the decisions of the past. Description From its initial version, the JVM has had two instructions for unconditional transfer of control within a method, goto (0xa7) and goto_w (0xc8). The goto_w instruction is used for larger jumps. All versions of the Java language have supported labeled statements; however, only the break and continue statements were able to specify a particular label as a target with the onerous restriction that the label must be lexically enclosing. The grammar addition for the goto statement is: GotoStatement: goto Identifier ; The new goto statement similar to break except that the target label can be anywhere inside the method and the identifier is mandatory. The compiler simply translates the goto statement into one of the JVM goto instructions targeting the right offset in the method. Therefore, adding the goto statement to the platform is only a small effort since existing compiler and JVM functionality is reused. Other language changes to support goto include obvious updates to definite assignment analysis, reachability analysis, and exception analysis. Possible future extensions include a computed goto as found in gcc, which would replace the identifier in the goto statement with an expression having the type of a label. Testing Since goto will be implemented using largely existing facilities, only light levels of testing are needed. Impact Compatibility: Since goto is already a keyword, there are no source compatibility implications. Performance/scalability: Performance will improve with more compact code. JVMs already need to handle irreducible flow graphs since goto is a VM instruction.

Read the article

OBIEE 11.1.1.5.0 BP2 patch released

- by THE

Normal 0 21 false false false DE X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} We are happy to announce that: OBIEE 11.1.1.5.0 BP2 patch is released for four platforms : Win64, Linux64, AIX64, and Solaris SPARC 64 Remaining four platforms Win32, Linux32, Hp-Itanium, and Solaris x86-64 are expected in a few weeks.This is released as patch 13611078 on MOS / http://support.oracle.comCustomers can download this patch directly, there is no password needed. Please note these points: README contains a list of all bug fixes included in this patch.(Only "new" fixes are listed in the readme of the BP2 patch. The fixes in the BP1 patch (aka PS1 - Patch 13562882 ) are included in the BP2 patch, even though they are not explicitly listed in the BP2 Readme. The readme is currently under review to reflect this.) This is a (mostly) cumulative bundle patch, and includes all fixes from PS1 (patch 13562882) which was released for Linux64 platform.Customers who have PS1 applied will get the expected OPatch conflict message. Since BP2 is cumulative, you can safely rollback PS1. You can do this prior to applying BP2, or you can choose to rollback at the time of applying the patch. Likewise, customers who have other one-off patches applied will get the expected OPatch conflict message. If you have questions about this, please review the applied patches and compare them with list of bug fixes in Normal 0 21 false false false DE X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} README's of BP2 and BP1 Patch 13562882. If all thebug fixes are included, you can continue with patch installation and rollback applied patches. Please note, this is not a fully cumulative patch on 11.1.1.5.0. This means it does not contain all one-off patches given out so far on top of 11.1.1.5.0. There is a small number of such bug fixes remaining, which will all be included in BP3 patch. In case you encounter this, please have Support log an OOB (one-off backport) requests for missing bug fixes so they can be included in BP3 cumulative bundle patch, which is expected to be fully cumulative going forward. This BP2 includes the CPU patch fix from BUG 12830486 - OCT 2011 CPU - UPDATE FOR OBIEE 11.1.1.5.0 BP3 patch is in planning stage, no ETA is announced yet.

Read the article

12c??? - Active Data Guard Far Sync

- by Jian Zhang(??)

?? ================ Active Data Guard Far Sync?Oracle 12c????(???Far Sync Standby),Far Sync?????????????(Primary Database)?????????Far Sync??,??(Primary Database) ??(synchronous)??redo?Far Sync??,??Far Sync????redo??(asynchronous)???????(Standby Database)???????????????????????Far Sync????????,init?????????,???????? ??redo ????Maximum Availability??,???????????(Primary Database)?????????Far Sync??,??(Primary Database)??(synchronous)??redo?Far Sync??,???????(zero data loss),?????Far Sync????,??????,??????????????Far Sync????redo??(asynchronous)???????(Standby Database)? ??redo ????Maximum Performance??,???????????(Primary Database)?????????Far Sync??,??(Primary Database) ????redo?Far Sync??,??Far Sync???????redo?????????(Standby Database)????????????????(Standby Database)??redo???(offload)? Far Sync????Data Guard ????(role transitions)????,?switchover/failover?????12c????? ???????Data Guard ????,?switchover/failover,???????????????Far Sync??,??Far Sync???????????????????? ???Far Sync???????,??????????????2?Far Sync??,???????? ???????Far Sync????? Far Sync??? ================ ????Far Sync ================ 1. ??Data Guard,???11.2??,??????«Active Database Duplication for A standby database» 2. ????Far Sync??,Far Sync????????,init?????????,???????? ??Far Sync???????,?????: SQL> ALTER DATABASE CREATE FAR SYNC INSTANCE CONTROLFILE AS '/tmp/controlfs01.ctl'; 3. ????redo?????Far Sync??,????LOG_ARCHIVE_DEST_2??: LOG_ARCHIVE_DEST_2='SERVICE=dg12cfs SYNC AFFIRM MAX_FAILURE=1 ALTERNATE=LOG_ARCHIVE_DEST_3 VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=dg12cfs' 4. ??Far Sync??????redo???,??Far Sync??LOG_ARCHIVE_DEST_2??: LOG_ARCHIVE_DEST_2='SERVICE=dg12cs ASYNC VALID_FOR=(STANDBY_LOGFILES,STANDBY_ROLE) DB_UNIQUE_NAME=dg12cs' 5. ????Far Sync???????,??????????????2?Far Sync??? 6. ???????: SQL> select * from V$DATAGUARD_CONFIG; DB_UNIQUE_NAME PARENT_DBUN DEST_ROLE CURRENT_SCN CON_ID ------------------------------ ------------------------------ ----------------- ----------- ---------- dg12cfs dg12cp FAR SYNC INSTANCE 682995 0 dg12cs dg12cfs PHYSICAL STANDBY 682995 0 dg12cp NONE PRIMARY DATABASE 683138 0 ????????????????:Oracle_12c_Active_Data_Guard_Far_Sync_v1.pdf

Read the article

Drive Online Engagement with Intuitive Portals and Websites

- by kellsey.ruppel

As more and more business is being conducted via online channels, engaging users and making them more productive and efficient though these online channels is becoming critical. These users could be customers, partners or employees and while the respective channels through which they interact might be different, these users do increasingly interact with your business through the Web, or mobile devices or now through various social mediums. Businesses need a user engagement strategy and solution that allows them to deliver targeted and personalized content and applications to users through the various online mediums and touch points. The customer experience today is made up of an ongoing set of interactions with organizations across many channels, online and offline. The Direct channel (including sales reps, email and mail) is an important point of contact, as is the Contact Center. Contact Centers rely on the phone as a means of interacting with customers, and also more now than ever, the Web as well. However, the online organization is often managed separately from the Contact Center organization within a business. In-store is an important channel for retailers, offering Point-of-Service for human interactions, and Kiosks which enable self-service. Kiosks are a Web-enabled touch point but in-store kiosks are often managed by the head of retail operations, rather than the online organization. And of course, the online channel, including customer interactions with an organization via digital means -- on the website, mobile websites, and social networking sites, has risen to paramount importance in recent years in the customer experience. Historically all of these channels have been managed separately. The result of all of this fragmentation is that the customer touch points with an organization are siloed. Their interactions online are not known and respected in their dealings in-store. Their calls to the contact center are not taken as input into what the website offers them when they arrive. Think of how many times you’ve fallen victim to this. Your experience with the company call center is different than the experience in-store. Your experience with the company website on your desktop computer is different than your experience on your iPad. I think you get the point. But the customer isn’t the only one we need to look at here, as employees and the IT organization have challenges as well when it comes to online engagement. There are many common tools and technologies that organizations have been using to try and engage users, whether it’s customers, employees or partners. Some have adopted different blog and wiki technologies (some hosted, some open source, sometimes embedded in platforms), to things like tagging, file sharing and content management, or composite applications for self-service applications and activity streams. Basically, there are so many different tools & technologies that each address different aspects of user engagement. Now, one of the challenges with this, is that if we look at each individual tool, typically just implementing for example a file sharing and basic collaboration solution, may meet the needs of the business user for one aspect of user engagement, but it may not be the best solution to engage with customers and partners, or it may not fit with IT standards such as integrating with their single sign on tools or their corporate website. Often, the scenario is that businesses are having to acquire multiple pieces and parts as well as build custom applications to meet their needs. Leaving customers and partners with a more fragmented way of interacting with the company. Every organization has some sort of enterprise balancing act between the needs of the business user and the needs and restrictions enforced by enterprise IT groups. As we’ve been discussing, we all know that the expectations for online engagement have changed since the days of the static, one-size fits all website. With these changes have come some very difficult organizational challenges as well. Today, as a business user, you want to engage with your customers, and your customers expect you to know who they are. They expect you to recall the details they’ve provided to you on your website, to your CSRs and to your sales people. They expect you to remember their purchases, their preferences and their problems. And they expect you to know who they are, equally well, across channels, including your web presence. This creates a host of challenges for today’s business users. Delivering targeted, relevant content online is now essential for converting prospects into customers and for engendering long term loyalty. Business users need the ability to leverage customer data from different sources to fuel their segmentation and targeting strategies and to easily set-up, manage and optimize online campaigns. Also critical, they need the ability to accomplish these things on-the-fly, at the speed of the marketplace, while making iterative improvements. These changing expectations put a host of demands on the IT organization as well. The web presence must be able to scale to support the delivery of personalized and targeted content to thousands of site visitors without sacrificing performance. And integration between systems becomes more important as well, as organizations strive to obtain one view of the customer culled from WCM data, CRM data and more. So then, how do you solve these challenges and meet the growing demands of your users? You need a solution that: Unifies every customer interaction across all channels Personalizes the products and content that interest the customer and to the device Delivers targeted promotions to the right customer Engages and improve employee productivity Provides self-service access to applications Includes embedded in-context social So how then do you achieve this level of online engagement, complete customer experience and engage your employees? The answer: Oracle WebCenter. If you want to learn how to get there, we encourage you to attend this webcast on Thursday Drive Online Engagement with Intuitive Portals and Websites, where we'll talk about how you are able to transform your portal experience and optimize online engagement -- making your portals more interactive and more engaging across multiple channels. Register today!

Read the article

Solaris 11.2: Functional Deprecation

- by alanc

In Solaris 11.1, I updated the system headers to enable use of several attributes on functions, including noreturn and printf format, to give compilers and static analyzers more information about how they are used to give better warnings when building code. In Solaris 11.2, I've gone back in and added one more attribute to a number of functions in the system headers: __attribute__((__deprecated__)). This is used to warn people building software that they’re using function calls we recommend no longer be used. While in many cases the Solaris Binary Compatibility Guarantee means we won't ever remove these functions from the system libraries, we still want to discourage their use. I made passes through both the POSIX and C standards, and some of the Solaris architecture review cases to come up with an initial list which the Solaris architecture review committee accepted to start with. This set is by no means a complete list of Obsolete function interfaces, but should be a reasonable start at functions that are well documented as deprecated and seem useful to warn developers away from. More functions may be flagged in the future as they get deprecated, or if further passes are made through our existing deprecated functions to flag more of them. Header Interface Deprecated by Alternative Documented in <door.h> door_cred(3C) PSARC/2002/188 door_ucred(3C) door_cred(3C) <kvm.h> kvm_read(3KVM), kvm_write(3KVM) PSARC/1995/186 Functions on kvm_kread(3KVM) man page kvm_read(3KVM) <stdio.h> gets(3C) ISO C99 TC3 (Removed in ISO C11), POSIX:2008/XPG7/Unix08 fgets(3C) gets(3C) man page, and just about every gets(3C) reference online from the past 25 years, since the Morris worm proved bad things happen when it’s used. <unistd.h> vfork(2) PSARC/2004/760, POSIX:2001/XPG6/Unix03 (Removed in POSIX:2008/XPG7/Unix08) posix_spawn(3C) vfork(2) man page. <utmp.h> All functions from getutent(3C) man page PSARC/1999/103 utmpx functions from getutentx(3C) man page getutent(3C) man page <varargs.h> varargs.h version of va_list typedef ANSI/ISO C89 standard <stdarg.h> varargs(3EXT) <volmgt.h> All functions PSARC/2005/672 hal(5) API volmgt_check(3VOLMGT), etc. <sys/nvpair.h> nvlist_add_boolean(3NVPAIR), nvlist_lookup_boolean(3NVPAIR) PSARC/2003/587 nvlist_add_boolean_value, nvlist_lookup_boolean_value nvlist_add_boolean(3NVPAIR) & (9F), nvlist_lookup_boolean(3NVPAIR) & (9F). <sys/processor.h> gethomelgroup(3C) PSARC/2003/034 lgrp_home(3LGRP) gethomelgroup(3C) <sys/stat_impl.h> _fxstat, _xstat, _lxstat, _xmknod PSARC/2009/657 stat(2) old functions are undocumented remains of SVR3/COFF compatibility support If the above table is cut off when viewing in the blog, try viewing this standalone copy of the table. To See or Not To See To see these warnings, you will need to be building with either gcc (versions 3.4, 4.5, 4.7, & 4.8 are available in the 11.2 package repo), or with Oracle Solaris Studio 12.4 or later (which like Solaris 11.2, is currently in beta testing). For instance, take this oversimplified (and obviously buggy) implementation of the cat command: #include <stdio.h> int main(int argc, char **argv) { char buf[80]; while (gets(buf) != NULL) puts(buf); return 0; } Compiling it with the Studio 12.4 beta compiler will produce warnings such as: % cc -V cc: Sun C 5.13 SunOS_i386 Beta 2014/03/11 % cc gets_test.c "gets_test.c", line 6: warning: "gets" is deprecated, declared in : "/usr/include/iso/stdio_iso.h", line 221 The exact warning given varies by compilers, and the compilers also have a variety of flags to either raise the warnings to errors, or silence them. Of couse, the exact form of the output is Not An Interface that can be relied on for automated parsing, just shown for example. gets(3C) is actually a special case — as noted above, it is no longer part of the C Standard Library in the C11 standard, so when compiling in C11 mode (i.e. when __STDC_VERSION__ >= 201112L), the <stdio.h> header will not provide a prototype for it, causing the compiler to complain it is unknown: % gcc -std=c11 gets_test.c gets_test.c: In function ‘main’: gets_test.c:6:5: warning: implicit declaration of function ‘gets’ [-Wimplicit-function-declaration] while (gets(buf) != NULL) ^ The gets(3C) function of course is still in libc, so if you ignore the error or provide your own prototype, you can still build code that calls it, you just have to acknowledge you’re taking on the risk of doing so yourself. Solaris Studio 12.4 Beta % cc gets_test.c "gets_test.c", line 6: warning: "gets" is deprecated, declared in : "/usr/include/iso/stdio_iso.h", line 221 % cc -errwarn=E_DEPRECATED_ATT gets_test.c "gets_test.c", line 6: "gets" is deprecated, declared in : "/usr/include/iso/stdio_iso.h", line 221 cc: acomp failed for gets_test.c This warning is silenced in the 12.4 beta by cc -erroff=E_DEPRECATED_ATT No warning is currently issued by Studio 12.3 & earler releases. gcc 3.4.3 % /usr/sfw/bin/gcc gets_test.c gets_test.c: In function `main': gets_test.c:6: warning: `gets' is deprecated (declared at /usr/include/iso/stdio_iso.h:221) Warning is completely silenced with gcc -Wno-deprecated-declarations gcc 4.7.3 % /usr/gcc/4.7/bin/gcc gets_test.c gets_test.c: In function ‘main’: gets_test.c:6:5: warning: ‘gets’ is deprecated (declared at /usr/include/iso/stdio_iso.h:221) [-Wdeprecated-declarations] % /usr/gcc/4.7/bin/gcc -Werror=deprecated-declarations gets_test.c gets_test.c: In function ‘main’: gets_test.c:6:5: error: ‘gets’ is deprecated (declared at /usr/include/iso/stdio_iso.h:221) [-Werror=deprecated-declarations] cc1: some warnings being treated as errors Warning is completely silenced with gcc -Wno-deprecated-declarations gcc 4.8.2 % /usr/bin/gcc gets_test.c gets_test.c: In function ‘main’: gets_test.c:6:5: warning: ‘gets’ is deprecated (declared at /usr/include/iso/stdio_iso.h:221) [-Wdeprecated-declarations] while (gets(buf) != NULL) ^ % /usr/bin/gcc -Werror=deprecated-declarations gets_test.c gets_test.c: In function ‘main’: gets_test.c:6:5: error: ‘gets’ is deprecated (declared at /usr/include/iso/stdio_iso.h:221) [-Werror=deprecated-declarations] while (gets(buf) != NULL) ^ cc1: some warnings being treated as errors Warning is completely silenced with gcc -Wno-deprecated-declarations

Read the article

Taking a Flying Leap

- by Lance Shaw

Yesterday, I went skydiving with three of my children. It was thrilling, scary, invigorating and exciting. While there is obvious risk involved, the reward and feeling of success was well worth it. You might already be wondering what skydiving would have to with WebCenter, so let me explain. Implementing a skydiving program and becoming an instructor does not happen overnight. It does not happen with the purchase of the needed technology. Not one of us would go out, buy a parachute, the harnesses, helmet and all the gear and be able to convince anyone that we are now ready to be a skydiving instructor. The fact is that obtaining the technology is merely a small piece of the overall process and so is the case with managing content in your company. You don't just buy the right software (Oracle WebCenter Content) and go to your boss and declare information management success. There is planning, research and effort that goes into deploying software of any kind and especially when it is as mission-critical to the success of your business as Enterprise Content Management. To become a certified skydiving instructor takes at least 3 years of commitment and often longer. In the United States, candidates must complete over 500 solo jumps of their own over a minimum of 36 months and then must complete additional rigorous training under observation. When you consider the amount of time and effort involved, it's not unlike getting a college degree and anyone that has trusted their lives to one of these instructors will no doubt appreciate their dedication to the curriculum. Implementing an ECM system won't take that long, but it certainly requires commitment, analysis and consideration. But guess what? Humans are involved and that means that mistakes can happen and that rules change. This struck me while reading an excellent post on darkreading.com by Glenn S. Phillips entitled "Mission Impossible: 4 Reasons Compliance is Impossible". His over-arching point was that with information management and security, environments change and people are involved meaning the work is never done. He stated that you can never claim your compliance efforts are complete because of the following reasons. People are involved. And lets face it, some are more trustworthy than others. Change is Constant. There is always some new technology coming along that is disruptive. Consumer grade cloud file sharing and sync tools come to mind here. Compliance is interpreted, not defined. Laws and the judges that read them are always on the move. Technology is a tool, not a complete solution. There is no magic pill. The skydiving analogy holds true here as well. Ultimately, a single person packs your parachute. For obvious reasons, you prefer that this person be trustworthy but there are no absolute guarantees of a 100% error-free scenario. Weather and wind conditions are never a constant and the best-laid plans for a great day of skydiving are easily disrupted by forces outside of your control. Rules and regulations vary by location and may be updated at any time and as I mentioned early on, even the best technology on its own will only get you started. The good news is that, like skydiving, with the right technology, the right planning, the right team and a proper understanding of the rules and regulations that govern your industry, your ECM deployment can be a great success. Failure to plan for any of the 4 factors that Glenn outlined in his article will certainly put your deployment and maybe even your company at risk, so consider them carefully. As a final aside, for those of you who consider skydiving an incredibly dangerous and risky pastime, consider this comparative statistic. In 2012, the U.S. Parachute Association recorded 19 fatal skydiving accidents in the U.S. out of roughly 3.1 million jumps. That’s 0.006 fatalities per 1,000 jumps. By comparison, the U.S. National Highway Traffic Safety Administration reports that there were 34,080 deaths due to car accidents in 2012. Based on the percentages, one could argue that it is safer to jump out of a plane than to drive to the airport where the skydiving will take place. While the way you manage, secure, classify, control, retain and dispose of company files may not carry as much risk as driving or skydiving, it certainly carries risk for the organization when not planned and deployed appropriately. Consider all the factors involved in your organization as you make your content management plans. For additional areas of consideration, be sure to download our free whitepaper on the topic entitled "The Top 10 Criteria for Choosing an ECM System" which is available for download here.

Read the article

Alcatel-Lucent: Enterprise 2.0: The Top 5 Things I would Do Over

- by Kellsey Ruppel

Happy Monday! Does anyone else feel as if the weekend went entirely too quickly? At least for those of us in the United States, we have the 4th of July Holiday next week to look forward to This week on the blog, we are going to focus on "WebCenter by Example" and highlight best practices from customers and partners. I recently came across this article and I think this is a great example of how we can learn from one another when it comes to social collaboration adoption. Do you agree with Jem? What things or best practices have you learned in your organizations? By Jem Janik, Enterprise community manager, Alcatel-Lucent Not so long ago, Engage, the Alcatel-Lucent employee social network and collaboration platform, celebrated its third birthday. With more than 25,000 members actively interacting each month, Engage has been a big enough success that it’s been the subject of external articles, and often those of us who helped launch it will go out and speak about what aspects contributed to that success. Hindsight is still 20/20 and what it takes to successfully launch an enterprise 2.0 community is fairly well-known now. Today I want to tell you what I suspect you really want to know about. As the enterprise community manager for Engage, after three years in, what are the top 5 things I wish we (and I mostly mean me) could do over? #5 Define your analytics solution from the start There is so much to do when you launch a community and initially growing it without complete chaos is quite a task. It doesn’t take too long to get to a point where you want to focus your continued efforts in growing company collaboration. Do people truly talk across regional boundaries or have we shifted siloed conversations to a new platform. Is there one organization that doesn’t interact with another? If you are lucky you’ll have someone in your community team well versed in the world of databases and SQL queries, but it takes time to figure out what backend analytics data actually means. Professional support can be expensive and it may be hard to justify later as it typically has the community manager as the only main customer. Figure out what you think you’ll want to know and how to get it early on. The sooner the better even if it doesn’t seem that critical at the time. #4 Lobbies guide you to the right places One piece of feedback that comes up more and more as we keep growing Engage is it’s hard to find stuff, or new people are not sure where to start. Something we’re doing now is defining some general topic areas of interest to be like “lobbies” into the platform and some common hashtags to go with them. I liken this to walking into a large medical or professional building for the first time. There are hundreds of offices, and you look to a sign in the lobby to get guided to the right place for you. We’re building that sign for members now, but again we missed the boat as the majority of the company has had their initial Engage experience. #3 Clean up, clean up, clean up Knowledge work and folksonomies are messy! The day we opened the doors to Engage I would have said we should keep everything ever created in Engage with an argument that it was a window into our collective knowledge so nothing should go. Well, 6000+ groups and 200,000+ pieces of content later, I’ve changed my mind. As previously mentioned, with too much “stuff” the system can be overwhelming to new members and it makes it harder to get what you’re looking for. Do we need that help document about a tool we no longer have? NO! Do we need that group that had 1 document and 2 discussions in the last two years? NO! Should we only have one group about a given topic instead of 4? YES! Last fall, Engage defined a cleanup process for groups not used for a long time. We also formed a volunteer cleaning army who are extra eyes on the hunt for “stuff” that should be updated, merged, or deleted. It’s better late than never, but in line with what’s becoming a theme I wish these efforts had started earlier. #2 Communications & local community management One of the most important aspects of my job is to make sure people who should be talking to each other are actually doing it. Connecting people to the other people they should know, the groups they should join, a piece of content that shouldn’t be missed. I have worked both inside and outside of communications teams, and they are the best informed people in your company. They know when something big is coming, how it impacts employees, how it fits with strategy, who else knows more, etc. Having communications professionals who are power users can help scale up community management because they are already so well connected. They also need to have the platform skills to pay attention without suffering email overload, how to grab someone’s attention, etc. I wish I’d had figured this out much earlier. If I had I would have groomed more communications colleagues into advocates and power members right at the start. #1 Grooming advocates vs. natural advocates I’ve just alluded to this above already. The very best advocates are those who naturally embrace your platform and automatically start to see new ways to work within it. Those advocates seem to come out of the woodwork naturally since some of them are early adopters. Not surprisingly, our best advocates today are those same people who were willing to come kick the tires when the community was completely empty. Unfortunately, we didn’t get a global spread of those natural advocates. I did ask around when we first launched for other people who might be good candidates, but didn’t push too hard as there were so many other things to get ready. That was a mistake. If I could get a redo I would have formally asked for people to be assigned where there were gaps and groomed them into an advocate. Today as we find new advocates to fill the gaps, people are hesitant as the initial set has three years of practice are ahead of the curve power members; it definitely would have been easier earlier on. As fairly early adopters to corporate scale enterprise collaboration, there hasn’t been a roadmap to follow as we’ve grown Engage, which is part of the fun! It’s clear a lot of issues are more easily tackled the earlier you identify and begin to correct them, and I’ve identified the main five I wish I could redo. In the spirit of collaboration, I hope someone else learns from my mistakes! View the original article by Jem here.

Read the article

Add Widget via Action in Toolbar

- by Geertjan

The question of the day comes from Vadim, who asks on the NetBeans Platform mailing list: "Looking for example showing how to add Widget to Scene, e.g. by toolbar button click." Well, the solution is very similar to this blog entry, where you see a solution provided by Jesse Glick for VisiTrend in Boston: https://blogs.oracle.com/geertjan/entry/zoom_capability Other relevant articles to read are as follows: http://netbeans.dzone.com/news/which-netbeans-platform-action http://netbeans.dzone.com/how-to-make-context-sensitive-actions Let's go through it step by step, with this result in the end, a solution involving 4 classes split (optionally, since a central feature of the NetBeans Platform is modularity) across multiple modules: The Customer object has a "name" String and the Droppable capability has a method "doDrop" which takes a Customer object: public interface Droppable { void doDrop(Customer c);} In the TopComponent, we use "TopComponent.associateLookup" to publish an instance of "Droppable", which creates a new LabelWidget and adds it to the Scene in the TopComponent. Here's the TopComponent constructor: public CustomerCanvasTopComponent() { initComponents(); setName(Bundle.CTL_CustomerCanvasTopComponent()); setToolTipText(Bundle.HINT_CustomerCanvasTopComponent()); final Scene scene = new Scene(); final LayerWidget layerWidget = new LayerWidget(scene); Droppable d = new Droppable(){ @Override public void doDrop(Customer c) { LabelWidget customerWidget = new LabelWidget(scene, c.getTitle()); customerWidget.getActions().addAction(ActionFactory.createMoveAction()); layerWidget.addChild(customerWidget); scene.validate(); } }; scene.addChild(layerWidget); jScrollPane1.setViewportView(scene.createView()); associateLookup(Lookups.singleton(d));} The Action is displayed in the toolbar and is enabled only if a Droppable is currently in the Lookup: @ActionID( category = "Tools", id = "org.customer.controler.AddCustomerAction")@ActionRegistration( iconBase = "org/customer/controler/icon.png", displayName = "#AddCustomerAction")@ActionReferences({ @ActionReference(path = "Toolbars/File", position = 300)})@NbBundle.Messages("AddCustomerAction=Add Customer")public final class AddCustomerAction implements ActionListener { private final Droppable context; public AddCustomerAction(Droppable droppable) { this.context = droppable; } @Override public void actionPerformed(ActionEvent ev) { NotifyDescriptor.InputLine inputLine = new NotifyDescriptor.InputLine("Name:", "Data Entry"); Object result = DialogDisplayer.getDefault().notify(inputLine); if (result == NotifyDescriptor.OK_OPTION) { Customer customer = new Customer(inputLine.getInputText()); context.doDrop(customer); } }} Therefore, when the Properties window, for example, is selected, the Action will be disabled. (See the Zoomable example referred to in the link above for another example of this.) As you can see above, when the Action is invoked, a Droppable must be available (otherwise the Action would not have been enabled). The Droppable is obtained in the Action and a new Customer object is passed to its "doDrop" method. The above in pictures, take note of the enablement of the toolbar button with the red dot, on the extreme left of the toolbar in the screenshots below: The above shows the JButton is only enabled if the relevant TopComponent is active and, when the Action is invoked, the user can enter a name, after which a new LabelWidget is created in the Scene. The source code of the above is here: http://java.net/projects/nb-api-samples/sources/api-samples/show/versions/7.3/misc/WidgetCreationFromAction Note: Showing this as an MVC example is slightly misleading because, depending on which model object ("Customer" and "Droppable") you're looking at, the V and the C are different. From the point of view of "Customer", the TopComponent is the View, while the Action is the Controler, since it determines when the M is displayed. However, from the point of view of "Droppable", the TopComponent is the Controler, since it determines when the Action, i.e., which is in this case the View, displays the presence of the M.

Read the article

Controlling the Sizing of the af:messages Dialog

- by Duncan Mills

Over the last day or so a small change in behaviour between 11.1.2.n releases of ADF and earlier versions has come to my attention. This has concerned the default sizing of the dialog that the framework automatically generates to handle the display of JSF messages being handled by the <af:messages> component. Unlike a normal popup, you don't have a physical <af:dialog> or <af:window> to set the sizing on in your page definition, so you're at the mercy of what the framework provides. In this case the framework now defines a fixed 250x250 pixel content area dialog for these messages, which can look a bit weird if the message is either very short, or very long. Unfortunately this is not something that you can control through the skin, instead you have to be a little more creative. Here's the solution I've come up with. Unfortunately, I've not found a supportable way to reset the dialog so as to say just size yourself based on your contents, it is actually possible to do this by tweaking the correct DOM objects, but I wanted to start with a mostly supportable solution that only uses the best practice of working through the ADF client side APIs. The Technique The basic approach I've taken is really very simple. The af:messages dialog is just a normal richDialog object, it just happens to be one that is pre-defined for you with a particular known name "msgDlg" (which hopefully won't change). Knowing this, you can call the accepted APIs to control the content width and height of that dialog, as our meerkat friends would say, "simples" 1 The JavaScript For this example I've defined three JavaScript functions. The first does all the hard work and is designed to be called from server side Java or from a page load event to set the default. The second is a utility function used by the first to validate the values you're about to use for height and width. The final function is one that can be called from the page load event to set an initial default sizing if that's all you need to do. Function resizeDefaultMessageDialog() /** * Function that actually resets the default message dialog sizing. * Note that the width and height supplied define the content area * So the actual physical dialog size will be larger to account for * the chrome containing the header / footer etc. * @param docId Faces component id of the document * @param contentWidth - new content width you need * @param contentHeight - new content height */ function resizeDefaultMessageDialog(docId, contentWidth, contentHeight) { // Warning this value may change from release to release var defMDName = "::msgDlg"; //Find the default messages dialog msgDialogComponent = AdfPage.PAGE.findComponentByAbsoluteId(docId + defMDName); // In your version add a check here to ensure we've found the right object! // Check the new width is supplied and is a positive number, if so apply it. if (dimensionIsValid(contentWidth)){ msgDialogComponent.setContentWidth(contentWidth); } // Check the new height is supplied and is a positive number, if so apply it. if (dimensionIsValid(contentHeight)){ msgDialogComponent.setContentHeight(contentHeight); } } Function dimensionIsValid() /** * Simple function to check that sensible numeric values are * being proposed for a dimension * @param sampleDimension * @return booolean */ function dimensionIsValid(sampleDimension){ return (!isNaN(sampleDimension) && sampleDimension > 0); } Function initializeDefaultMessageDialogSize() /** * This function will re-define the default sizing applied by the framework * in 11.1.2.n versions * It is designed to be called with the document onLoad event */ function initializeDefaultMessageDialogSize(loadEvent){ //get the configuration information var documentId = loadEvent.getSource().getProperty('documentId'); var newWidth = loadEvent.getSource().getProperty('defaultMessageDialogContentWidth'); var newHeight = loadEvent.getSource().getProperty('defaultMessageDialogContentHeight'); resizeDefaultMessageDialog(documentId, newWidth, newHeight); } Wiring in the Functions As usual, the first thing we need to do when using JavaScript with ADF is to define an af:resource in the document metaContainer facet <af:document> .... <f:facet name="metaContainer"> <af:resource type="javascript" source="/resources/js/hackMessagedDialog.js"/> </f:facet> </af:document> This makes the script functions available to call. Next if you want to use the option of defining an initial default size for the dialog you use a combination of <af:clientListener> and <af:clientAttribute> tags like this. <af:document title="MyApp" id="doc1"> <af:clientListener method="initializeDefaultMessageDialogSize" type="load"/> <af:clientAttribute name="documentId" value="doc1"/> <af:clientAttribute name="defaultMessageDialogContentWidth" value="400"/> <af:clientAttribute name="defaultMessageDialogContentHeight" value="150"/> ... Just in Time Dialog Sizing So what happens if you have a variety of messages that you might add and in some cases you need a small dialog and an other cases a large one? Well in that case you can re-size these dialogs just before you submit the message. Here's some example Java code: FacesContext ctx = FacesContext.getCurrentInstance(); //reset the default dialog size for this message ExtendedRenderKitService service = Service.getRenderKitService(ctx, ExtendedRenderKitService.class); service.addScript(ctx, "resizeDefaultMessageDialog('doc1',100,50);"); FacesMessage msg = new FacesMessage("Short message"); msg.setSeverity(FacesMessage.SEVERITY_ERROR); ctx.addMessage(null, msg); So there you have it. This technique should, at least, allow you to control the dialog sizing just enough to stop really objectionable whitespace or scrollbars. 1 Don't worry if you don't get the reference, lest's just say my kids watch too many adverts.

Read the article

Vmware cpu allocation for a spiking database server

- by user1552172

I have a database server with many poorly written queries that causes the sql server to spike then drop constantly ( a massive start from scratch is happening). I need to know if the cpu allocation on the vm to expand as needed is best practice for a case like this. I am wondering if the esxi platform cant expand as fast as the spikes happen. I am curious what is best practice for vm cpu allocation on sql server (with horribly written queries)

Read the article

Object Oriented PHP Best Practices

- by user270797

Say I have a class which represents a person, a variable within that class would be $name. Previously, In my scripts I would create an instance of the object then set the name by just using: $object->name = "x"; However, I was told this was not best practice? That I should have a function set_name() or something similar like this: function set_name($name) { $this->name=$name; } is this correct? If in this example I want to insert a new "person" record into the db, how do I pass all the information about the person ie $name, $age, $address, $phone etc to the class in order to insert it, should I do: function set($data) { $this->name= $data['name']; $this->age = $data['age']; etc etc } Then send it an array? Would this be best practice? or could someone please recommend best practice?

Read the article

tips for learning from opensource

- by dole doug

Hi there, Besides practice(practice and more practice) reading books and forums, analyzing others people code is a must in order to have a career in this field. The problem is that I'm a student(feels like always on learning stage) but sometimes i can't solve the problems by my own. I was thinking that on public open source repositories might be the answer I'm looking for. My question is how can i find the answer to some of my problems in open source projects/community? Do you have any tips to share for me? ty

Read the article

what practical proofs are there about the Turing completeness of neural nets? what nns can execute c

- by Albert

I'm interested in the computational power of neural nets. It is generally accepted that recurrent neural nets are Turing complete. Now I was searching for some papers which proofs this. What I found so far: Turing computability with neural nets, Hava T. Siegelmann and Eduardo D. Sontag, 1991 I think this is only interesting from a theoretical point of view because it needs to have the neuron activity of infinite exactness (to encode the state somehow as a rational number). S. Franklin and M. Garzon, Neural computability This needs an unbounded number of neurons and also doesn't really seem to be that much practical. (Note that another question of mine tries to point out this kind of problem between such theoretical results and the practice.) I'm searching mostly for some neural net which really can execute some code which I can also simulate and test in practice. Of course, in practice, they would have some kind of limited memory. Does anyone know something like this?

Read the article

What are the difference between Cygwin on windows and real UNIX environment

- by Tarun

Hi, I am a C/C++ developer. I have never done C++ programming on UNIX, I have done only on windows. I want to practice C++ on Unix. (Because all big companies ask C++ with Unix). I have a laptop on which i do not want to install any other OS (because i have installed very important software on it and i don't have setups) So, I searched and found CygWin which is Unix emulator for Windows. I am thinking to practice C++ on this. Please help me, how can I practice/learn in more close to the environment(Unix Environment) that is used in Big companies like IBM. What will be the difference between Unix and Cygwin?

Read the article

question about adding another column to a sql statement

- by every_answer_gets_a_point

i am starting with this table: SELECT [Lab Occurrence Form].[Practice Code], [Lab Occurrence Form].[1 0 Preanalytical (Before Testing)], Count([Lab Occurrence Form].[1 0 Preanalytical (Before Testing)]) AS [CountOf1 0 Preanalytical (Before Testing)] FROM [Lab Occurrence Form] WHERE ((([Lab Occurrence Form].[Occurrence Date]) Between [Forms]![By Number]![Text4] And [Forms]![By Number]![Text2])) GROUP BY [Lab Occurrence Form].[Practice Code], [Lab Occurrence Form].[1 0 Preanalytical (Before Testing)] HAVING ((([Lab Occurrence Form].[Practice Code])<>"") AND ((Count([Lab Occurrence Form].[1 0 Preanalytical (Before Testing)]))<>0)); it selects 3 columns but i need to aggregate the comments and put it in the fourth column where the first two values are the same

Read the article

Should my DAOs (Database Entities) Directly match my UI Objects?

- by scarpacci

I am trying to figure out best practice for N-Tier application design. When designing the objects my UI needs and those that will be persisted in the DB some of my colleagues are suggesting that the objects be one in the same. This doesn't not feel right to me and I am ultimately looking for some best practice documentation to help me in this decision. I honestly do not understand why I would want to design this way given that other applications may want to interact with my Data Access Layer....or it is just ignorance or lack of understanding on my part. Any documentation, information you could provide would be greatly appreciated. Just want to better understand these concepts and I am having a hard time finding some good information on the best practice for implementing these patterns (Or it is right in front of me on what I found and I didn't understand what was being outlined). Thanks, S

Read the article

Start a Mapping or Process Flow from OWB Browser

- by Dong Ruirong

Basically, we start a Mapping or Process Flow from Oracle Warehouse Builder (OWB) Design Client. But actually we can also start a Mapping or Process Flow from OWB Browser. This paper will introduce the Start Report first and then introduce how to start/rerun a Mapping or Process Flow from OWB Browser. Start Report Start Report is used to start an execution of a Mapping or Process Flow. So there are two kinds of Start Report: Mapping Start Report (See Figure 1) and Process Flow Start Report (See Figure 2). Start Report shows the Mapping or Process Flow identification properties, including latest deployment and latest execution, lists all execution parameters for the Mapping or Process Flow, which were specified by the latest deployment, and assigns parameter default values from the latest deployment specification. You can do a couple of things from Start Report: Sort execution parameters on name, category. Table 1 lists all parameters of a Mapping. Table 2 lists all parameters of a Process Flow. Change values of any input parameter where permitted. For some parameters, selection lists are provided. For example, Mapping’s parameter Audit Level has a selection list. Reset all parameter settings to their default values. Apply basic validation to parameter values before starting an execution. Start the Mapping or Process Flow, which means it is executed immediately. Navigate to Deployment Report for latest deployment details of the Mapping or Process Flow. Navigate to Execution Job Report for latest execution of current Mapping or Process Flow Link to on-link help Warehouse Report Page, Deployment Report, Execution Report, Execution Schedule Report and Execution Summary Report. Figure 1 Mapping Start Report Table 1 Execution Parameters and default values for a Mapping Category Name Mode Input Value System Audit Level In Error Details System Bulk Size In 1000 System Commit Frequency In 1000 System EXECUTE_RESUME_TASK In FALSE System FORCE_RESUME_OPTION In FALSE System Max No of Errors In 50 System NUMBER_OF_TIMES_TO_RETRY In 2 System Operating Mode In Set Based Fail Over to Row Based System PARALLEL_LEVEL In 0 System Procedure Name In main System Purge Group In WB Figure 2 Process Flow Start Report Table 2 Execution Parameters and default values for a Process Flow Category Name Mode Input Value System EVAL_LOCATION In System Item Key In-Out System Item Type In PFPKG_1 Start a Mapping or Process Flow To navigate to Start Report, it’s better to login OWB Browser with Control Center option; if not, after logging in OWB Browser, go to Control Center first. Then you can follow the ways introduced in this section to navigate to Start Report. One more thing you need to pay attention to is that you are not allowed to deploy any Mappings and Process Flows from OWB Browser as it’s not supported. So it’s necessary to deploy the Mappings and Process Flows first before starting them from OWB Browser. If you have deployed a Mapping or Process Flow but have not started it, please navigate from Object Summary Report or Deployment Schedule Report to Start Report. 1. Navigating from Object Summary Report to Start Report Open the Object Summary Report to see all deployed Mappings and Process Flows. Click the Mapping Name or Process Flow Name link to see its Deployment Report. Select the Start link in the Available Reports tab for the given Mapping or Process Flow to display a Start Report for the Mapping or Process Flow. The execution parameters have the default deployment-time settings. Change any of the input parameter values as required. Click Start Execution button to execute the Mapping or Process Flow. 2. Navigating from Deployment Schedule Report to Start Report Open the Deployment Schedule Report to see deployment details of Mapping and Process Flow. Expand the project trees to find the deployed Mappings and Process Flows. Click the Mapping Name or Process Flow Name link to see its Deployment Report. Select the Start link in the Available Reports tab for the given Mapping or Process Flow to display a Start Report for the Mapping or Process Flow. The execution parameters have the default deployment-time settings. Change any of the input parameter values as required. Click Start Execution button to execute the Mapping or Process Flow. Re-run a Mapping or Process Flow If you have executed a Mapping or Process Flow, you can navigate from Object Summary Report, Deployment Schedule Report, Execution Summary Report or Execution Schedule Report to Start Report. 1. Navigating from the Execution Summary Report to Start Report Open the Execution Summary Report to see all execution jobs including Mapping jobs and Process Flow jobs. Click on the Mapping Name or Process Flow Name to see its Execution Report. Select the Start link in the Available Reports tab for the given Mapping or Process Flow to display a Start Report for the Mapping or Process Flow. The execution parameters have the default deployment-time settings. Change any of the input parameter values as required. Click Start Execution button to execute the Mapping or Process Flow. 2. Navigating from the Execution Schedule Report to Start Report Open the Execution Schedule Report to see list of all executions of Mapping and Process Flow. Click on the Mapping Name or Process Flow Name to see its Execution Report. Select the Start link in the Available Reports tab for the given Mapping or Process Flow to display a Start Report for the Mapping or Process Flow. The execution parameters have the default deployment-time settings. Change any of the input parameter values as required. Click Start Execution button to execute the Mapping or Process Flow. If the execution of a Mapping or Process Flow is successful, you will see this message from the Start Report: Start Execution request successful. (See Figure 3) Figure 3 Execution Result You can also confirm the execution of the Mapping or Process Flow by referring to Execution Report of the current Mapping or Process Flow by clicking the link in the Available Reports tab for the given Mapping or Process Flow. One new record of execution job details is added to Execution Report of the Mapping or Process Flow which shows the details of the execution such as Start Time, Elapsed Time, Status, the number of records selected, inserted, updated, deleted etc.

Read the article

JMaghreb 2012 Trip Report

- by arungupta

JMaghreb is the inaugural Java conference organized by Morocco JUG. It is the biggest Java conference in Maghreb (5 countries in North West Africa). Oracle was the exclusive platinum sponsor with several others. The registrations had to be closed at 1412 for the free conference and several folks were already on the waiting list. Rabat with 531 registrations and Casablanca with 426 were the top cities. Some statistics ... 850+ attendees over 2 days, 500+ every day 30 sessions were delivered by 18 speakers from 10 different countries 10 sessions in French and 20 in English 6 of the speakers spoke at JavaOne 2012 8 will be at Devoxx Attendees from 5 different countries and 57 cities in Morocco 40.9% qualified them as professional and rest as students Topics ranged from HTML5, Java EE 7, ADF, JavaFX, MySQL, JCP, Vaadin, Android, Community, JCP Java EE 6 hands-on lab was sold out within 7 minutes and JavaFX in 12 minutes I gave the keynote along with Simon Ritter which was basically a recap of the Strategy and Technical keynotes presented at JavaOne 2012. An informal survey during the keynote showed the following numbers: 25% using NetBeans, 90% on Eclipse, 3 on JDeveloper, 1 on IntelliJ About 10 subscribers to free online Java magazine. This digital magazine is a comprehensive source of information for everything Java - subscribe for free!! About 10-15% using Java SE 7. Download JDK 7 and get started today! Even JDK 8 builds have been available for a while now. My second talk explained the core concepts of WebSocket and how JSR 356 is providing a standard API to build WebSocket-driven applications in Java EE 7. TOTD #183 explains how you can easily get started with WebSocket in GlassFish 4. The complete slide deck is available: Next day started with a community keynote by Sonya Barry. Some of us live the life of JCP, JSR, EG, EC, RI, etc every day, but not every body is. To address that, Sonya prepared an excellent introductory presentation providing an explanation of these terms and how java.net infrastructure supports Java development. The registration for the lab showed there is a definite demand for these technologies in this part of the world. I delivered the Java EE 6 hands-on lab to a packed room of about 120 attendees. Most of the attendees were able to progress and follow the lab instructions. Some of the attendees did not have a laptop but were taking extensive notes on paper notepads. Several attendees were already using Java EE 6 in their projects and typically they are the ones asking deep dive questions. Also gave out three copies of my recently released Java EE 6 Pocket Guide and new GlassFish t-shirts. Definitely feels happy to coach ~120 more Java developers learn standards-based enterprise Java programming. I also participated in a JCP BoF along with Werner, Sonya, and Badr. Adotp-a-JSR, java.net infrastructure, how to file a JSR, what is an RI, and other similar topics were discussed in a candid manner. You can follow @JMaghrebConf or check out their facebook page. java.net published a timely conversation with Badr El Houari - the fearless leader of the Morocco JUG team. Did you know that Morocco JUG stood for JCP EC elections (ADD LINK) ? Even though they did not get elected but did fairly well. Now some sample tweets from #JMaghreb ... #JMaghreb is over. Impressive for a first edition! Thanks @badrelhouari and all the @MoroccoJUG team ! Since you @speakjava : System.out.println("Thank you so much dear Tech Evangelist ! The JavaFX was pretty amazing !!! "); #JMaghreb @YounesVendetta @arungupta @JMaghrebConf Right ! hope he will be back to morocco again and again .. :) @Alji_ @arungupta @JMaghrebConf That dude is a genius ;) Put it on your wall :p @arungupta rocking Java EE 6 at @JMaghrebConf #Java #JavaEE #JMaghreb http://t.co/isl0Iq5p @sonyabarry you are an awesome speaker ;-) #JMaghreb rich more than 550 attendees in day one. Expecting more tomorrow! ongratulations @badrelhouari the organisation was great! The talks were pretty interesting, and the turnout was surprising at #JMaghreb! #JMaghreb is truly awesome... The speakers are unbelievable ! #JavaFX... Just amazing #JMaghreb Charmed by the talk about #javaFX ( nodes architecture, MVC, Lazy loading, binding... ) gotta start using it intead of SWT. #JMaghreb JavaFX is killing JFreeChart. It supports Charts a lot of kind of them ... #JMaghreb The british man is back #JMaghreb I do like him!! #JMaghreb @arungupta rocking @JMaghrebConf. pic.twitter.com/CNohA3PE @arungupta Great talk about the future of Java EE (JEE 7 & JEE 8) Thank you. #JMaghreb JEE7 more mooore power , leeess less code !! #JMaghreb They are simplifying the existing API for Java Message Service 2.0 #JMaghreb good to know , the more the code is simplified the better ! The Glassdoor guy #arungupta is doing it RIGHT ! #JMaghreb Great presentation of The Future of the Java Platform: Java EE 7, Java SE 8 & Beyond #jMaghreb @arungupta is a great Guy apparently #JMaghreb On a personal front, the hotel (Soiftel Jardin des Roses) was pretty nice and the location was perfect. There was a 1.8 mile loop dirt trail right next to it so I managed to squeeze some runs before my upcoming marathon. Also enjoyed some great Moroccan cuisine - Couscous, Tajine, mint tea, and moroccan salad. Visit to Kasbah of the Udayas, Hassan II (one of the tallest mosque in the world), and eating in a restaurant in a kasbah are some of the exciting local experiences. Now some pictures from the event (and around the city) ... And the complete album: Many thanks to Badr, Faisal, and rest of the team for organizing a great conference. They are already thinking about how to improve the content, logisitics, and flow for the next year. I'm certainly looking forward to JMaghreb 2.0 :-)

Read the article

Solaris X86 AESNI OpenSSL Engine

- by danx

Solaris X86 AESNI OpenSSL Engine Cryptography is a major component of secure e-commerce. Since cryptography is compute intensive and adds a significant load to applications, such as SSL web servers (https), crypto performance is an important factor. Providing accelerated crypto hardware greatly helps these applications and will help lead to a wider adoption of cryptography, and lower cost, in e-commerce and other applications. The Intel Westmere microprocessor has six new instructions to acclerate AES encryption. They are called "AESNI" for "AES New Instructions". These are unprivileged instructions, so no "root", other elevated access, or context switch is required to execute these instructions. These instructions are used in a new built-in OpenSSL 1.0 engine available in Solaris 11, the aesni engine. Previous Work Previously, AESNI instructions were introduced into the Solaris x86 kernel and libraries. That is, the "aes" kernel module (used by IPsec and other kernel modules) and the Solaris pkcs11 library (for user applications). These are available in Solaris 10 10/09 (update 8) and above, and Solaris 11. The work here is to add the aesni engine to OpenSSL. X86 AESNI Instructions Intel's Xeon 5600 is one of the processors that support AESNI. This processor is used in the Sun Fire X4170 M2 As mentioned above, six new instructions acclerate AES encryption in processor silicon. The new instructions are: aesenc performs one round of AES encryption. One encryption round is composed of these steps: substitute bytes, shift rows, mix columns, and xor the round key. aesenclast performs the final encryption round, which is the same as above, except omitting the mix columns (which is only needed for the next encryption round). aesdec performs one round of AES decryption aesdeclast performs the final AES decryption round aeskeygenassist Helps expand the user-provided key into a "key schedule" of keys, one per round aesimc performs an "inverse mixed columns" operation to convert the encryption key schedule into a decryption key schedule pclmulqdq Not a AESNI instruction, but performs "carryless multiply" operations to acclerate AES GCM mode. Since the AESNI instructions are implemented in hardware, they take a constant number of cycles and are not vulnerable to side-channel timing attacks that attempt to discern some bits of data from the time taken to encrypt or decrypt the data. Solaris x86 and OpenSSL Software Optimizations Having X86 AESNI hardware crypto instructions is all well and good, but how do we access it? The software is available with Solaris 11 and is used automatically if you are running Solaris x86 on a AESNI-capable processor. AESNI is used internally in the kernel through kernel crypto modules and is available in user space through the PKCS#11 library. For OpenSSL on Solaris 11, AESNI crypto is available directly with a new built-in OpenSSL 1.0 engine, called the "aesni engine." This is in lieu of the extra overhead of going through the Solaris OpenSSL pkcs11 engine, which accesses Solaris crypto and digest operations. Instead, AESNI assembly is included directly in the new aesni engine. Instead of including the aesni engine in a separate library in /lib/openssl/engines/, the aesni engine is "built-in", meaning it is included directly in OpenSSL's libcrypto.so.1.0.0 library. This reduces overhead and the need to manually specify the aesni engine. Since the engine is built-in (that is, in libcrypto.so.1.0.0), the openssl -engine command line flag or API call is not needed to access the engine—the aesni engine is used automatically on AESNI hardware. Ciphers and Digests supported by OpenSSL aesni engine The Openssl aesni engine auto-detects if it's running on AESNI hardware and uses AESNI encryption instructions for these ciphers: AES-128-CBC, AES-192-CBC, AES-256-CBC, AES-128-CFB128, AES-192-CFB128, AES-256-CFB128, AES-128-CTR, AES-192-CTR, AES-256-CTR, AES-128-ECB, AES-192-ECB, AES-256-ECB, AES-128-OFB, AES-192-OFB, and AES-256-OFB. Implementation of the OpenSSL aesni engine The AESNI assembly language routines are not a part of the regular Openssl 1.0.0 release. AESNI is a part of the "HEAD" ("development" or "unstable") branch of OpenSSL, for future release. But AESNI is also available as a separate patch provided by Intel to the OpenSSL project for OpenSSL 1.0.0. A minimal amount of "glue" code in the aesni engine works between the OpenSSL libcrypto.so.1.0.0 library and the assembly functions. The aesni engine code is separate from the base OpenSSL code and requires patching only a few source files to use it. That means OpenSSL can be more easily updated to future versions without losing the performance from the built-in aesni engine. OpenSSL aesni engine Performance Here's some graphs of aesni engine performance I measured by running openssl speed -evp $algorithm where $algorithm is aes-128-cbc, aes-192-cbc, and aes-256-cbc. These are using the 64-bit version of openssl on the same AESNI hardware, a Sun Fire X4170 M2 with a Intel Xeon E5620 @2.40GHz, running Solaris 11 FCS. "Before" is openssl without the aesni engine and "after" is openssl with the aesni engine. The numbers are MBytes/second. OpenSSL aesni engine performance on Sun Fire X4170 M2 (Xeon E5620 @2.40GHz) (Higher is better; "before"=OpenSSL on AESNI without AESNI engine software, "after"=OpenSSL AESNI engine) As you can see the speedup is dramatic for all 3 key lengths and for data sizes from 16 bytes to 8 Kbytes—AESNI is about 7.5-8x faster over hand-coded amd64 assembly (without aesni instructions). Verifying the OpenSSL aesni engine is present The easiest way to determine if you are running the aesni engine is to type "openssl engine" on the command line. No configuration, API, or command line options are needed to use the OpenSSL aesni engine. If you are running on Intel AESNI hardware with Solaris 11 FCS, you'll see this output indicating you are using the aesni engine: intel-westmere $ openssl engine (aesni) Intel AES-NI engine (no-aesni) (dynamic) Dynamic engine loading support (pkcs11) PKCS #11 engine support If you are running on Intel without AESNI hardware you'll see this output indicating the hardware can't support the aesni engine: intel-nehalem $ openssl engine (aesni) Intel AES-NI engine (no-aesni) (dynamic) Dynamic engine loading support (pkcs11) PKCS #11 engine support For Solaris on SPARC or older Solaris OpenSSL software, you won't see any aesni engine line at all. Third-party OpenSSL software (built yourself or from outside Oracle) will not have the aesni engine either. Solaris 11 FCS comes with OpenSSL version 1.0.0e. The output of typing "openssl version" should be "OpenSSL 1.0.0e 6 Sep 2011". 64- and 32-bit OpenSSL OpenSSL comes in both 32- and 64-bit binaries. 64-bit executable is now the default, at /usr/bin/openssl, and OpenSSL 64-bit libraries at /lib/amd64/libcrypto.so.1.0.0 and libssl.so.1.0.0 The 32-bit executable is at /usr/bin/i86/openssl and the libraries are at /lib/libcrytpo.so.1.0.0 and libssl.so.1.0.0. Availability The OpenSSL AESNI engine is available in Solaris 11 x86 for both the 64- and 32-bit versions of OpenSSL. It is not available with Solaris 10. You must have a processor that supports AESNI instructions, otherwise OpenSSL will fallback to the older, slower AES implementation without AESNI. Processors that support AESNI include most Westmere and Sandy Bridge class processor architectures. Some low-end processors (such as for mobile/laptop platforms) do not support AESNI. The easiest way to determine if the processor supports AESNI is with the isainfo -v command—look for "amd64" and "aes" in the output: $ isainfo -v 64-bit amd64 applications pclmulqdq aes sse4.2 sse4.1 ssse3 popcnt tscp ahf cx16 sse3 sse2 sse fxsr mmx cmov amd_sysc cx8 tsc fpu Conclusion The Solaris 11 OpenSSL aesni engine provides easy access to powerful Intel AESNI hardware cryptography, in addition to Solaris userland PKCS#11 libraries and Solaris crypto kernel modules.

Search Results

Search found 19002 results on 761 pages for 'oracle b2b 11g practice'.

Page 501/761 | < Previous Page | 497 498 499 500 501 502 503 504 505 506 507 508 | Next Page >

- by PictureCo

- by Janice J. Heiss

- by Ali Bahrami

- by danx

- by Tim Dexter

- by Kyle Hatlestad

- by darcy

- by THE

- by Jian Zhang(??)

- by kellsey.ruppel

- by alanc

- by Lance Shaw

- by Kellsey Ruppel

- by Geertjan

- by Duncan Mills

- by user1552172

- by user270797

- by dole doug

- by Albert

- by Tarun

- by every_answer_gets_a_point

- by scarpacci

- by Dong Ruirong

- by arungupta

- by danx

< Previous Page | 497 498 499 500 501 502 503 504 505 506 507 508 | Next Page >