Search Results

Search found 32610 results on 1305 pages for 'internet options'.

Page 502/1305 | < Previous Page | 498 499 500 501 502 503 504 505 506 507 508 509  | Next Page >

• Windows updates behind a physical firewall with only IP based rules and generic outbound connections are turned off

  - by user125245

  I have some boxes that I do not want to allow any in or outbound traffic to the internet Except for windows updates. However the fire wall in place (Cisco ASA) apparently only supports ip based rules. As best I can tell access to Microsoft updates via anything other then the half dozen URL masks the Microsoft lists as needed does not appear possible. I have kicked around building a full WSUS that I would then manually copy the update files to so that no direct Microsoft access is needed but this sounds very top heavy for the very few boxes involved. I have also kicked around manual updates all around but am not certain how to be conveniently and confidently sure that the correct updates are being applied in the correct order. Any ideas from any direction would be appreciated. I want this as simple / cost effective as possible but have very little flexibility on the only absolutely required internet access policy.

  Read the article

• 2 virtual domains: one on port 80 one on port 8080, how?

  - by Simone

  I've been struggling with this, basically what I want is this: A virtual domain to run on the 80 another virtual domain to run FROM 80 TO 8080 what I've done so far is trying different combinations with apache, but all i got is having all the virtual domains pointing to port 80 this is my conf: <VirtualHost domain1.com:80> DocumentRoot /var/www/domain1 <Directory "/var/www/domain1"> allow from all Options +Indexes </Directory> ServerName domain1.com </VirtualHost> <VirtualHost server.domain2.com:80> DocumentRoot /var/www <Directory "/var/www"> allow from all Options +Indexes </Directory> ServerName server.domain2.com ServerAlias www.server.domain2.com ProxyPass / http://server.domain2.com:8080/ </VirtualHost> suggestions? :(

  Read the article

• Automate opening HTML and printing to PDF

  - by craigpatik

  I need a way to automate the following process in Windows 7: Open an .html file in Internet Explorer Print to PDF Save the PDF with a patterned file name (i.e., original_name_YYYY-MM-DD.pdf) Ideally, I could drag and drop several files or open a whole folder of files at once and a PDF would be created for each one. A command line solution is also acceptable. The files have to be opened in the browser because parts of the page are rendered with JavaScript on page load. In other words, if you simply right-click on the file in Explorer and choose "print", the resulting file is not the same because the JS didn't run. If it helps, Internet Explorer can be set as the default browser, and a PDF printer can be set as the default printer.

  Read the article

• College wifi works easily on Linux, but not on Windows

  - by user52849

  In Linux: After connecting to the college wifi, going to the network login page logging in, the internet works perfectly as it should. In Windows: After connecting to the college wifi, going to the network login page, logging in, Windows shows "Internet access" and the wireless icon turns white. But still after that, regardless of the browser being used, attempting to accessing any page just shows "Sending request". It does work though after a lot of tries, but only in intervals. But when running Ubuntu 11.10 in VirtualBox, it works properly just like booting in Ubuntu, even if it isn't working on Windows. The college wifi service is really crappy and has been unable to solve this problem. I'm pretty sure there should be a solution for this, but what? What is it that Ubuntu is doing right and Windows isn't? Windows settings set to "Automatically detect settings" and no proxy server used.

  Read the article

• IE 9:Release

  - by xamlnotes

  Yippie: IE 9s coming out March 14!: http://windowsteamblog.com/ie/b/ie/archive/2011/03/09/a-more-beautiful-web-launches-on-march-14th.aspx For you guys that love other browsers that’s ok. Personally I love IE for many reasons such as ease of use and stability.  I am cranked up to see what IE 9 does as it was retooled from the start. So this one should be big. Also, its bringing HTML 5 support now so we can have much richer applications. Its about time that HTML was revved to move from the old text like stuff to a better model. More info: http://windowsteamblog.com/ie/b/ie/archive/tags/ie9/ Some glimpses here: http://windows.microsoft.com/en-US/internet-explorer/products/ie-9/features and http://www.beautyoftheweb.com/#/highlights/all-around-fast   Looks like it will be much faster (with hardware support now) in many areas.  Better startup times and install times are hot on my list of favorites too. Plus they retooled the UI in many places too.  The UI looks a lot cleaner now: http://windows.microsoft.com/en-US/internet-explorer/products/ie-9/features/focused-on-your-websites Plus theres tons more like changes in tab pages, a notfication bar, pinned sites and so forth. Plus theres cool integration with Windows 7 also.

  Read the article

• VPN Authentication Credentials (Local/Remote Identifiers) For Remote Access VPN

  - by thatidiotguy

  So I am trying to set up a remote access VPN using the free ShrewSoft vpn client: https://www.shrew.net/software I want to use a PSK as the authentication mechanism combined with XAuth so that a connection requires a valid username/pass combo. Under the authentication tab this particular VPN Client however is asking for a Local Identity and a Remote Identity. The options for Local Identity Type are: Fully Qualified Domain Name User Fully Qualified Domain Name IP Address Key Identifier The options for Remote Identity are: Any Fully Qualified Domain Name User Fully Qualified Domain Name IP Address Key Identifier My current thinking is that I can use the Fully Qualifed Domain Name provided by the remote firewall for the Remote Identity, but I do not know what it wants for local identity. Just to stress: I am not trying to set up a site to site VPN. Can anybody shed any light on what I am missing here? A screenshot can be provided if that would be helpful. The current error I am getting during the connection is: IKE Responder: Proposed IKE ID mismatch

  Read the article

• Enable [command] key to register as something other than just [ctrl]?

  - by gojomo

  I'm running 10.04LTS inside VMWare Fusion on a Mac. The [command] key (aka [windows] on many keyboards) is almost always behaving as if it was [ctrl], even though I done anything explicit to request that behavior. In fact, in SystemPreferencesKeyboardLayoutsOptionsAlt/Win key behavior, 'default' is chosen (rather than the 'Control is mapped to Win keys' option). However, choosing other options there do not seem to change the handling of [command], at least not as tested in the SystemPreferenceKeyboard Shortcuts app. (No matter what I've tried, [command]-x is always detected as [Ctrl]-x in that app.) I've tried: various options under SystemPreferencesKeyboardLayoutsOptionsAlt/Win key behavior toggling the VMWare Fusion Preferences KKeyboard & Mouse Key Mappings setup which claims to map '[command]' to '[windows]', and restarting the VM in each position the xmodmap lines suggested at https://help.ubuntu.com/community/MappingWindowsKey And yet, it's clear that all Ubuntu apps aren't merging [ctrl] and [command], because in 'Terminal', [shift]-[ctrl]-c will Copy, but [shift]-[command]-c will not. If the [command]/[windows] key was recognized as anything else ('Super', 'Meta', 'Hyper'? I don't care as long as it's not 'Control'), then I could achieve my real goal (which happens to be enabling CMD-based cut/copy/paste in PyCharm, while leaving CTRL-X/etc available for emacs-like bindings). I think any solution which manages to make [command]-x appear as something other than [ctrl]-x in PreferencesKeyboard Shortcuts will probably do the trick.

  Read the article

• Group Policy dealing with IE zone assignment not sticking!

  - by Brandon

  I have a group policy (which ONLY deals with the zone assignment) -that is continually switching on and off with reboots. I thought it was a conflicting group policy but when I run group policy modeling report it doesn't show any descrepancies that I can see. I thought it may be an issue with one domain controller wasn't replicating my policy change to the other one, but this isn't the case. I checked both domain controllers and they show the same information. The assignment is on a user basis and is in: user configuration > administrative templates > windows components > internet explorer > internet control panel > security and is site to zone assignment.

  Read the article

• Which powerful laptop, with UK keyboard and 8gb ram

  - by RobinL

  I've been searching high and low for high spec laptops compatible with Ubuntu. The lack of coherent information on the topic is high (considering the number of people who apparently want a good laptop with an OS operating system). So I thought you may have some advice. My requirements: a) has = 8Gb ram b) is compatible with Ubuntu c) has a UK keyboard and charger d) does not cost the Earth Which would you go for? Does anyone have good experience with high-end laptops running Ubuntu? So here's some background research: Samsung Series 7 looks great, but has various problems on Ubuntu, including: poor battery life, touchpad does not work, graphics card not fully supported and sucks power when it does (see [here] and [here], for example). Other options on the [wish list] include: the sensible [Acer] (possibly n.1 choice, but not sure about graphics card compatibility or battery), a nice looking [HP Pavilion dv6-6c56ea], which also has incompatibility issues (see [here] and [here] and check ubuntuforums) And another [Acer] which may be best due to its simplicity and cheapness. Other sub-questions: didn't Dell offer Ubuntu support for decent laptops (above 6Gb ram their offerings are scarce); what about pre-installed options such as those provided by System76? If it weren't for the UK keyboard and charger, I'd probably go for this [amazing-looking] [machine]. Many thanks for any advice, P.s. Apologies for lack of hyperlinks; I'm a noob so only allowed 2 :( All 10 links are available here though for the interested reader :) Robin

  Read the article

• Visual Studio 2013 now available!

  - by TATWORTH

  Originally posted on: http://geekswithblogs.net/TATWORTH/archive/2013/10/17/visual-studio-2013-now-available.aspxVisual Studio 2013 is now available for download! I will attach the beginning of their web page announcement. You should note that web projects may now be readily a combination of Web Forms, MVC and Web API.We are excited to announce that Visual Studio 2013 is now available to you as an MSDN subscriber! For developers and development teams, Visual Studio 2013 easily delivers applications across all Microsoft devices, cloud, desktop, server and game console platforms by providing a consistent development experience, hybrid collaboration options, and state-of-the-art tools, services, and resources. Below are just a few of the highlights in this release:   •   Innovative features for greater developer productivity:Visual Studio 2013 includes many user interface improvements; there are more than 400 modified icons with greater differentiation and increased use of color, a redesigned Start page, and other design changes.  •   Support for Windows 8.1 app development: Visual Studio 2013 provides the ideal toolset for building modern applications that leverage the next wave in Windows platform innovation (Windows 8.1), while supporting devices and services across all Microsoft platforms. Support for Windows Store app development in Windows 8.1 includes updates to the tools, controls and templates, new Coded UI test support for XAML apps, UI Responsiveness Analyzer and Energy Consumption profiler for XAML & HTML apps, enhanced memory profiling tools for HTML apps, and improved integration with the Windows Store.  •   Web development advances: Creating websites or services on the Microsoft platform provides you with many options, including ASP.NET WebForms, ASP.NET MVC, WCF or Web API services, and more. Previously, working with each of these approaches meant working with separate project types and tooling isolated to that project’s capabilities. The One ASP.NET vision unifies your web project experience in Visual Studio 2013 so that you can create ASP.NET web applications using your preference of ASP.NET component frameworks in a single project. Now you can mix and match the right tools for the job within your web projects, giving you increased flexibility and productivity.

  Read the article

• How to add entries to combobox in Word XP

  - by Kris C

  I'm trying to follow the following instructions to add a combobox to a form and add some values to it for the user to pick: http://office.microsoft.com/en-gb/help/create-forms-that-users-complete-in-word-HP005230270.aspx I've created a .dot and then dragged a combobox onto the document. When I double-click on it though, it opens up the VBA editor. Do I have to add the items programatically as per the following question How do I add a combobox in Word? or is it possible to do this using the UI? The other question/answer refers to creating a form. Is there a step I've missed between creating a .dot to then create a form somehow before adding form elements to it? Right clicking gives the following menu options: Cut Copy Paste properties View code Combo Box Object - Edit or Convert Format Control Hyperlink Choosing edit allows me to type some text onto the visible part of the control, but doesn't allow me to add multiple options Right-clicking and selecting properties opens the following:

  Read the article

• Can't install Ubuntu in Windows 8

  - by user171635

  I’ve been trying to install Ubuntu 13.04 64-bit edition on an ASUS (K53Z) laptop. I have Windows 8 64-bit installed in a non UEFI mode (I think since it starts-up with the Windows logo and I don’t have the UEFI settings). This laptop had installed Windows 7 and when I upgraded it I didn’t knew about the UEFI advantages. I tried several times to install Ubuntu from a USB device and it loads the logo and then I can’t go further in the installation. I thought it was the version of Ubuntu and tried to install Fedora (even if I personally prefer Ubuntu). I had the same problem: Fedora’s logo appears and it gets stuck. I tried also to boot from different USB devices and didn’t work either. My Bios has EFI options to boot but they were not enabled. So I tried to enable them to boot the USB in UEFI mode. A menu shows up with the options of install Ubuntu and try Ubuntu. If I click the Install or try option, I get a black screen and I can’t go further with the install (which I think is normal since I don’t have Windows 8 in EFI mode). My hypothesis is that the Bios isn’t letting Ubuntu write or read from my SSD, because the activity LED in the USB memory is on when it’s loading the installation files. Once the files are ready and the Ubuntu logo is loaded I don’t see a LED activity on neither the SSD or the USB. Thanks If I missed data you can ask me.

  Read the article

• how to properly edit hosts, hostname and resolf.conf?

  - by Firewall

  i,v been searching the internet for a real noop tutorial on the subject but could not found any direct info. on how to edit these files the proper way. i,v got a debian internet server that i use to host some personal domains and runs squid and rTorrent. the server is up and running with no problems but i am confused about a few things. lets say that i named my server (foo), my domain is (example.com) and my public IP is 95.211.133.200 now: should /etc/hostname contains: tango.example.com or tango <----- just the server name should /etc/hosts contains: 127.0.0.1 localhost.localdomain localhost 95.211.133.200 foo.example.com foo should /etc/resolf.conf contains (along with the nameservers) both: domain example.com search example.com or just the first one. are there any other files that i should edit in order to make things right? last thing, the command: domainname returns: (none) i believe it should return (example.com). what should i do to correct that?

  Read the article

• how to properly edit hosts, hostname and resolf.conf? [migrated]

  - by Firewall

  i,v been searching the internet for a real noop tutorial on the subject but could not found any direct info. on how to edit these files the proper way. i,v got a debian internet server that i use to host some personal domains and runs squid and rTorrent. the server is up and running with no problems but i am confused about a few things. lets say that i named my server (foo), my domain is (example.com) and my public IP is 95.211.133.200 now: should /etc/hostname contains: tango.example.com or tango <----- just the server name should /etc/hosts contains: 127.0.0.1 localhost.localdomain localhost 95.211.133.200 foo.example.com foo should /etc/resolf.conf contains (along with the nameservers) both: domain example.com search example.com or just the first one. are there any other files that i should edit in order to make things right? last thing, the command: domainname returns: (none) i believe it should return (example.com). what should i do to correct that?

  Read the article

• Why doesn't wireless work on Wubi 12.04 with a Broadcom BCM4312 card?

  - by Kristin

  I have recently set up ubuntu 12.04 on my laptop using the Wubi installer. I am having a very difficult time setting up a wireless internet connection. I am currently set up with an ethernet connection which I have used to download all new updates and to activate the Broadcom STA wireless driver. I have tried several things in the terminal based on other people's posts: ~$ rfkill list 0: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: yes ~$ rfkill unblock all It doesn't change anything. I also tried rebooting and connecting to the internet on my Windows Vista OS, and it worked, so I know that the connection should not be hard blocked. I have also tried installing b43 firmware (lp/phy version) that is supposed to work with my chip (BCM4312). It seems to have no effect. Then I tried: ~$ iwconfig lo no wireless extensions. eth1 IEEE 802.11 Access Point: Not-Associated Link Quality:5 Signal level:0 Noise level:0 Rx invalid nwid:0 invalid crypt:0 invalid misc:0 eth0 no wireless extensions. This is my first time trying to work with ubuntu, so I would appreciate any help. Thanks. Also sorry this is poorly formatted. I'm having troubles with that too.

  Read the article

• Storing images in file system and returning URLs or virtually resizing and returning byte arrays?

  - by ismaelf

  I need to create a REST web service to manage user submitted images and displaying them all in a website. There are multiple websites that are going to use this service to manage and display images. The requirements are to have 5 pre-defined image sizes available. The 2 options I see are the following: The web service will create the 5 images, store them in the file system and and store the URL's in the database when the user submits the image. When the image is requested, the web service will return an array of URLs. I see this option to be a little hard on the hard drive. The estimates are 10,000 users per site, and lets say, 100 sites. The heavy processing will be done when the user submits the image and each image is going to be pulled from the File System. The web service will store just the image that the user submits in the file system and it's URL in the database. When the user request images, the web service will get the info from the DB, load the image on memory, create its 5 instances and return an object with 5 image arrays (I will probably cache the arrays). This option is harder on the processor and memory. The heavy processing will be done when the images get requested. A plus I see for option 2 is that it will give me the option to rewrite the URL of the image and make them site dependent (prettier) than having a image repository for all websites. But this is not a big deal. What do you think of these options? Do you have any other suggestions?

  Read the article

• Unable to print A6 on Canon LBP 2900B php

  - by ????? ???

  I am working on web application. In which I have to print an invoice on A6 paper. To better control priniting I used TCPDF. In TCPDF options I have setup it to print A6. Now my TCPDF is working fine. But there is problem in printing it on Canon LBP2900B. As there is no option available to print A6 page. When I try to print on it. It used A4 paper to print it. I have also checked Custom options in Canon. But unable to figure out how to print it using Canon printer.

  Read the article

• Ubuntu 12.04 (dual boot with Windows 7), doesn't boot after I deleted some files from Windows. What can I do?

  - by sacha

  The Ubuntu 12.04 I have installed (in Dual-Boot with Windows 7) using WUBI worked perfectly for over a month. Then it informed me that I ran out of space on the hard drive and I assumed it was because my hard drive on Windows was full. I logged into Windows and deleted the whole New Volume D. But now the problem is that it is not possible to log into Ubuntu but in Windows it's possible. I really paid attention about not deleting important files in Windows. When i try to log into Ubuntu : _either it does not go far and i have to restart the computer _or it goes until the loading time and a message says something like "[...] Graphics could not be detected [...]" and they ask to choose between 4 options including "Start with poor Graphics", "Reconfigure Graphics", "Troubleshoot" and "Restart the computer". But none of the options run and i also have to restart the computer manually from that point I have plenty of useful files in Ubuntu so i want to find another way to solve the problem instead of Uninstall/Reinstall Ubuntu. I want to know what happened ? And how to make it work ?

  Read the article

• Using Bulk Operations with Coherence Off-Heap Storage

  - by jpurdy

  Some NamedCache methods (including clear(), entrySet(Filter), aggregate(Filter, …), invoke(Filter, …)) may generate large intermediate results. The size of these intermediate results may result in out-of-memory exceptions on cache servers, and in some cases on cache clients. This may be particularly problematic if out-of-memory exceptions occur on more than one server (since these operations may be cluster-wide) or if these exceptions cause additional memory use on the surviving servers as they take over partitions from the failed servers. This may be particularly problematic with clusters that use off-heap storage (such as NIO or Elastic Data storage options), since these storage options allow greater than normal cache sizes but do nothing to address the size of intermediate results or final result sets. One workaround is to use a PartitionedFilter, which allows the application to break up a larger operation into a number of smaller operations, each targeting either a set of partitions (useful for reducing the load on each cache server) or a set of members (useful for managing client result set sizes). It is also possible to return a key set, and then pull in the full entries using that key set. This also allows the application to take advantage of near caching, though this may be of limited value if the result is large enough to result in near cache thrashing.

  Read the article

• Authenticated proxy in Windows command prompt

  - by tlvince

  My Internet access is delivered through an authenticated proxy. This is setup correctly in the "Internet Options" control panel applet and all browsing/GUI apps work fine. For cmd, proxy settings are typically set by exporting http_proxy. The applications I'm trying to use are git and Putty's pscp.exe. I've tried the following syntax to no avail: set http_proxy=http://username:[email protected]:port/ I've also experimented with Netsh.exe and ProxyCfg.exe with no luck. How does one configure an authenticated proxy in the Windows command prompt?

  Read the article

• Optimize Windows file access over network

  - by Djizeus

  At my company I frequently need to access shared files over a Windows network. These files are located on the other side of the planet, so I guess the file share goes through some kind of VPN over Internet, but I don't control this and it is supposed to be "transparent" for me. However it is extremely slow. Displaying the content of a directory in the file explorer takes about 10s. Even if over the Internet, I did not expect that retrieving a list of file names would be that long. Are there any settings to optimize this from my Windows XP workstation, or is it mostly related to the way the network is configured? The only thing I have found so far is to cache all file names, while by default only short file names are cached (http://support.microsoft.com/kb/843418).

  Read the article

• Created a new zone in DNS manager - can't get site bindings to work in iis 7

  - by nick gowdy

  Firstly I would like to say that I am a noob when it comes to DNS, I am a web developer and I am trying to setup an intranet site for a charity. I have windows server 2008 and I installed both iis 7 and dns manager. In IIS I have this binding that works - Type: http:// IP Address: 192.168.1.9 Port: 80 Host name: My host name is empty and when I try to navigate to this website on the network, the http code is 200 and the page renders. Now if I try Host name of test.organization.intranet Internet explorer says "Internet Explorer cannot display the webpage" and the server response is aborted. In DNS manager I created a new forward lookup zone of organization.intranet I did this through the configure a dns server wizard and I created a host (A) with the same IP as the one being used in IIS. The full Host name is test.organization.intranet but it doesn't work. Maybe I am missing something obvious because it's not an area of IT that I know very well, but I am stuck for why I can't get it to work.

  Read the article

• How do I bridge connections in Debian?

  - by Josh

  In windows I can select Local Area Connection and Wireless Network Connection, right click and select Bridge Connections How can I achieve the same effect in Linux? (Debian to be exact) Pretty much I want Computer B to connect to Computer A via ethernet cable. Well Computer A is connected wirelessly. Allowing Computer B to get on the internet. == UPDATE == I've enabled IP forwarding and used the following iptables command: iptables -t nat -A POSTROUTING -o wlan0 -j MASQUERADE I'm still unable to access the internet from Computer B though.

  Read the article

• In Outlook 2010, can you add "Categories" to the "New Email" Ribbon?

  - by Jeff

  I couldn't figure out how to do this in Outlook 2007, and I was hoping I could do it in Outlook 2010... I want the ability to quickly apply a category when composing a new email (typically a "Waiting For..." category) for things that need a response. It is possible to apply a category by clicking the "Options" ribbon, then the little arrow under the More Options section - but why can't I get the nice big "Categories" drop-down that's available in the "Tags" section of the main Outlook window. There are about a kabillion commands in the "Customize Ribbon" dialog box for the New Mail window, but I couldn't find anything about Categories. Should I just give up?

  Read the article

• Android : How to open youtube links on my facebook messenger app, in the youtube app? [migrated]

  - by dev_android

  I am unable to play YouTube videos from the links I get on my Facebook Messenger app. Here's what happens: A friend of mine posts a video link to me (YouTube link) as a message on Facebook. I receive it on my Android mobile in the Facebook messenger app. I click on it and it shows a Dialogue-Box (you can call that a pop-up) which asks me to choose an app to open the video with. Now earlier, there used to be the video player apps in my mobile along with the internet browsers installed on my mobile that used to come up there. So I would select an internet browser, and it in turn would re-direct me to the "YouTube" app itself. However, now, I am only getting video-players in that Dialogue Box as an option to open the YouTube video, but of course, if I select them, they are not able to stream the video. Has anyone found a way around this problem? It is really bothersome.

  Read the article

< Previous Page | 498 499 500 501 502 503 504 505 506 507 508 509  | Next Page >