Search Results

Search found 16051 results on 643 pages for 'schema design'.

Page 502/643 | < Previous Page | 498 499 500 501 502 503 504 505 506 507 508 509  | Next Page >

• ODEE Green Field (Windows) Part 3 - SOA Suite

  - by AndyL-Oracle

   So you're still here, are you? I'm sure you're probably overjoyed at the prospect of continuing with our green field installation of ODEE. In my previous post, I covered the installation of WebLogic - you probably noticed, like I did, that it's a pretty quick install. I'm pretty certain this had everything to do with how quickly the next post made it to the internet! So let's dig in. Make sure you've followed the steps from the initial post to obtain the necessary software and prerequisites! Unpack the RCU (Repository Creation Utility). This ZIP file contains a directory (rcuHome) that should be extracted into your ORACLE_HOME. Run the RCU – execute rcuHome/bin/rcu.bat. Click Next. Select Create and click Next. Enter the database connection details and click Next – any failure to connection will show in the Messages box. Click Ok Expand and select the SOA Infrastructure item. This will automatically select additional required components. You can change the prefix used, but DEV is recommended. If you are creating a sandbox that includes additional components like WebCenter Content and UMS, you may select those schemas as well but they are not required for a basic ODEE installation. Click Next. Click OK. Specify the password for the schema(s). Then click Next. Click Next. Click OK. Click OK. Click Create. Click Close. Unpack the SOA Suite installation files into a single directory e.g. SOA. Run the installer – navigate and execute SOA/Disk1/setup.exe. If you receive a JDK error, switch to a command line to start the installer. To start the installer via command line, do Start?Run?cmd and cd into the SOA\Disk1 directory. Run setup.exe –jreLoc < pathtoJRE >. Ensure you do not use a path with spaces – use the ~1 notation as necessary (your directory must not exceed 8 characters so “Program Files” becomes “Progra~1” and “Program Files (x86)” becomes “Progra~2” in this notation). Click Next. Select Skip and click Next. Resolve any issues shown and click Next. Verify your oracle home locations. Defaults are recommended. Click Next. Select your application server. If you’ve already installed WebLogic, this should be automatically selected for you. Click Next. Click Install. Allow the installation to progress… Click Next. Click Finish. You can save the installation details if you want. That should keep you satisfied for the moment. Get ready, because the next posts are going to be meaty! 

  Read the article

• E-Business Suite : Role of CHUNK_SIZE in Oracle Payroll

  - by Giri Mandalika

  Different batch processes in Oracle Payroll flow have the ability to spawn multiple child processes (or threads) to complete the work in hand. The number of child processes to fork is controlled by the THREADS parameter in APPS.PAY_ACTION_PARAMETERS view. THREADS parameter The default value for THREADS parameter is 1, which is fine for a single-processor system but not optimal for the modern multi-core multi-processor systems. Setting the THREADS parameter to a value equal to or less than the total number of [virtual] processors available on the system may improve the performance of payroll processing. However on the down side, since multiple child processes operate against the same set of payroll tables in HR schema, database may experience undesired consequences such as buffer busy waits and index contention, which results in giving up some of the gains achieved by using multiple child processes/threads to process the work. Couple of other action parameters, CHUNK_SIZE and CHUNK_SHUFFLE, help alleviate the database contention. eg., Set a value for THREADS parameter as shown below. CONNECT APPS/APPS_PASSWORD UPDATE PAY_ACTION_PARAMETERS SET PARAMETER_VALUE = DESIRED_VALUE WHERE PARAMETER_NAME = 'THREADS'; COMMIT; (I am not aware of any maximum value for THREADS parameter) CHUNK_SIZE parameter The size of each commit unit for the batch process is controlled by the CHUNK_SIZE action parameter. In other words, chunking is the act of splitting the assignment actions into commit groups of desired size represented by the CHUNK_SIZE parameter. The default value is 20, and each thread processes one chunk at a time -- which means each child process inserts or processes 20 assignment actions at any time. When multiple threads are configured, each thread picks up a chunk to process, completes the assignment actions and then picks up another chunk. This is repeated until all the chunks are exhausted. It is possible to use different chunk sizes in different batch processes. During the initial phase of processing, CHUNK_SIZE number of assignment actions are inserted into relevant table(s). When multiple child processes are inserting data at the same time into the same set of tables, as explained earlier, database may experience contention. The default value of 20 is mostly optimal in such a case. Experiment with different values for the initial phase by +/-10 for CHUNK_SIZE parameter and observe the performance impact. A larger value may make sense during the main processing phase. Again experimentation is the key in finding the suitable value for your environment. Start with a large value such as 2000 for the chunk size, then increment or decrement the size by 500 at a time until an optimal value is found. eg., Set a value for CHUNK_SIZE parameter as shown below. CONNECT APPS/APPS_PASSWORD UPDATE PAY_ACTION_PARAMETERS SET PARAMETER_VALUE = DESIRED_VALUE WHERE PARAMETER_NAME = 'CHUNK_SIZE'; COMMIT; CHUNK_SIZE action parameter accepts a value that is as low as 1 or as high as 16000. CHUNK SHUFFLE parameter By default, chunks of assignment actions are processed sequentially by all threads - which may not be a good thing especially given that all child processes/threads performing similar actions against the same set of tables almost at the same time. By saying not a good thing, I mean to say that the default behavior leads to contention in the database (in data blocks, for example). It is possible to relieve some of that database contention by randomizing the processing order of chunks of assignment actions. This behavior is controlled by the CHUNK SHUFFLE action parameter. Chunk processing is not randomized unless explicitly configured. eg., Set chunk shuffling as shown below. CONNECT APPS/APPS_PASSWORD UPDATE PAY_ACTION_PARAMETERS SET PARAMETER_VALUE = 'Y' WHERE PARAMETER_NAME = 'CHUNK SHUFFLE'; COMMIT; Finally I recommend checking the following document out for additional details and additional pay action tunable parameters that may speed up the processing of Oracle Payroll.     My Oracle Support Doc ID: 226987.1 Oracle 11i & R12 Human Resources (HRMS) & Benefits (BEN) Tuning & System Health Checks Also experiment with different combinations of parameters and values until the right set of action parameters and values are found for your deployment.

  Read the article

• New Sample Demonstrating the Traversing of Tree Bindings

  - by Duncan Mills

  A technique that I seem to use a fair amount, particularly in the construction of dynamic UIs is the use of a ADF Tree Binding to encode a multi-level master-detail relationship which is then expressed in the UI in some kind of looping form – usually a series of nested af:iterators, rather than the conventional tree or treetable. This technique exploits two features of the treebinding. First the fact that an treebinding can return both a collectionModel as well as a treeModel, this collectionModel can be used directly by an iterator. Secondly that the “rows” returned by the collectionModel themselves contain an attribute called .children. This attribute in turn gives access to a collection of all the children of that node which can also be iterated over. Putting this together you can represent the data encoded into a tree binding in all sorts of ways. As an example I’ve put together a very simple sample based on the HT schema and uploaded it to the ADF Sample project. It produces this UI: The important code is shown here for a Region -> Country -> Location Hierachy: <af:iterator id="i1" value="#{bindings.AllRegions.collectionModel}" var="rgn"> <af:showDetailHeader text="#{rgn.RegionName}" disclosed="true" id="sdh1"> <af:iterator id="i2" value="#{rgn.children}" var="cnty">     <af:showDetailHeader text="#{cnty.CountryName}" disclosed="true" id="sdh2">       <af:iterator id="i3" value="#{cnty.children}" var="loc">         <af:panelList id="pl1">         <af:outputText value="#{loc.City}" id="ot3"/>           </af:panelList>         </af:iterator>       </af:showDetailHeader>     </af:iterator>   </af:showDetailHeader> </af:iterator>  You can download the entire sample from here:

  Read the article

• The five steps of business intelligence adoption: where are you?

  - by Red Gate Software BI Tools Team

  When I was in Orlando and New York last month, I spoke to a lot of business intelligence users. What they told me suggested a path of BI adoption. The user’s place on the path depends on the size and sophistication of their organisation. Step 1: A company with a database of customer transactions will often want to examine particular data, like revenue and unit sales over the last period for each product and territory. To do this, they probably use simple SQL queries or stored procedures to produce data on demand. Step 2: The results from step one are saved in an Excel document, so business users can analyse them with filters or pivot tables. Alternatively, SQL Server Reporting Services (SSRS) might be used to generate a report of the SQL query for display on an intranet page. Step 3: If these queries are run frequently, or business users want to explore data from multiple sources more freely, it may become necessary to create a new database structured for analysis rather than CRUD (create, retrieve, update, and delete). For example, data from more than one system — plus external information — may be incorporated into a data warehouse. This can become ‘one source of truth’ for the business’s operational activities. The warehouse will probably have a simple ‘star’ schema, with fact tables representing the measures to be analysed (e.g. unit sales, revenue) and dimension tables defining how this data is aggregated (e.g. by time, region or product). Reports can be generated from the warehouse with Excel, SSRS or other tools. Step 4: Not too long ago, Microsoft introduced an Excel plug-in, PowerPivot, which allows users to bring larger volumes of data into Excel documents and create links between multiple tables.  These BISM Tabular documents can be created by the database owners or other expert Excel users and viewed by anyone with Excel PowerPivot. Sometimes, business users may use PowerPivot to create reports directly from the primary database, bypassing the need for a data warehouse. This can introduce problems when there are misunderstandings of the database structure or no single ‘source of truth’ for key data. Step 5: Steps three or four are often enough to satisfy business intelligence needs, especially if users are sophisticated enough to work with the warehouse in Excel or SSRS. However, sometimes the relationships between data are too complex or the queries which aggregate across periods, regions etc are too slow. In these cases, it can be necessary to formalise how the data is analysed and pre-build some of the aggregations. To do this, a business intelligence professional will typically use SQL Server Analysis Services (SSAS) to create a multidimensional model — or “cube” — that more simply represents key measures and aggregates them across specified dimensions. Step five is where our tool, SSAS Compare, becomes useful, as it helps review and deploy changes from development to production. For us at Red Gate, the primary value of SSAS Compare is to establish a dialog with BI users, so we can develop a portfolio of products that support creation and deployment across a range of report and model types. For example, PowerPivot and the new BISM Tabular model create a potential customer base for tools that extend beyond BI professionals. We’re interested in learning where people are in this story, so we’ve created a six-question survey to find out. Whether you’re at step one or step five, we’d love to know how you use BI so we can decide how to build tools that solve your problems. So if you have a sixty seconds to spare, tell us on the survey!

  Read the article

• MySQL Server 5.6 defaults changes

  - by user12626240

  We're improving the MySQL Server defaults, as announced by Tomas Ulin at MySQL Connect. Here's what we're changing:  Setting  Old  New  Notes back_log  50  50 + ( max_connections / 5 ) capped at 900 binlog_checksum  off  CRC32  New variable in 5.6 binlog_row_event_max_size  1k  8k flush_time  1800  Windows changes from 1800 to 0  Was already 0 on other platforms host_cache_size  128  128 + 1 for each of the first 500 max_connections + 1 for every 20 max_connections over 500, capped at 2000  New variable in 5.6 innodb_autoextend_increment  8  64  Now affects *.ibd files. 64 is 64 megabytes innodb_buffer_pool_instances  0  8. On 32 bit Windows only, if innodb_buffer_pool_size is greater than 1300M, default is innodb_buffer_pool_size / 128M innodb_concurrency_tickets  500  5000 innodb_file_per_table  off  on innodb_log_file_size  5M  48M  InnoDB will always change size to match my.cnf value. Also see innodb_log_compressed_pages and binlog_row_image innodb_old_blocks_time 0  1000 1 second innodb_open_files  300  300; if innodb_file_per_table is ON, higher of table_open_cache or 300 innodb_purge_batch_size  20  300 innodb_purge_threads  0  1 innodb_stats_on_metadata  on  off join_buffer_size 128k  256k max_allowed_packet  1M  4M max_connect_errors  10  100 open_files_limit  0  5000  See note 1 query_cache_size  0  1M query_cache_type  on/1  off/0 sort_buffer_size  2M  256k sql_mode  none  NO_ENGINE_SUBSTITUTION  See later post about default my.cnf for STRICT_TRANS_TABLES sync_master_info  0  10000  Recommend: master_info_repository=table sync_relay_log  0  10000 sync_relay_log_info  0  10000  Recommend: relay_log_info_repository=table. Also see Replication Relay and Status Logs table_definition_cache  400  400 + table_open_cache / 2, capped at 2000 table_open_cache  400  2000   Also see table_open_cache_instances thread_cache_size  0  8 + max_connections/100, capped at 100 Note 1: In 5.5 there was already a rule to make open_files_limit 10 + max_connections + table_cache_size * 2 if that was higher than the user-specified value. Now uses the higher of that and (5000 or what you specify). We are also adding a new default my.cnf file and guided instructions on the key settings to adjust. More on this in a later post. We're also providing a page with suggestions for settings to improve backwards compatibility. The old example files like my-huge.cnf are obsolete. Some of the improvements are present from 5.6.6 and the rest are coming. These are ideas, and until they are in an official GA release, they are subject to change. As part of this work I reviewed every old server setting plus many hundreds of emails of feedback and testing results from inside and outside Oracle's MySQL Support team and the many excellent blog entries and comments from others over the years, including from many MySQL Gurus out there, like Baron, Sheeri, Ronald, Schlomi, Giuseppe and Mark Callaghan. With these changes we're trying to make it easier to set up the server by adjusting only a few settings that will cause others to be set. This happens only at server startup and only applies to variables where you haven't set a value. You'll see a similar approach used for the Performance Schema. The Gurus don't need this but for many newcomers the defaults will be very useful. Possibly the most unusual change is the way we vary the setting for innodb_buffer_pool_instances for 32-bit Windows. This is because we've found that DLLs with specified load addresses often fragment the limited four gigabyte 32-bit address space and make it impossible to allocate more than about 1300 megabytes of contiguous address space for the InnoDB buffer pool. The smaller requests for many pools are more likely to succeed. If you change the value of innodb_log_file_size in my.cnf you will see a message like this in the error log file at the next restart, instead of the old error message: [Warning] InnoDB: Resizing redo log from 2*64 to 5*128 pages, LSN=5735153 One of the biggest challenges for the defaults is the millions of installations on a huge range of systems, from point of sale terminals and routers though shared hosting or end user systems and on to major servers with lots of CPU cores, hundreds of gigabytes of RAM and terabytes of fast disk space. Our past defaults were for the smaller systems and these change that to larger shared hosting or shared end user systems, still with a bias towards the smaller end. There is a bias in favour of OLTP workloads, so reporting systems may need more changes. Where there is a conflict between the best settings for benchmarks and normal use, we've favoured production, not benchmarks. We're very interested in your feedback, comments and suggestions.

  Read the article

• What's new in Servlet 3.1 ? - Java EE 7 moving forward

  - by arungupta

  Servlet 3.0 was released as part of Java EE 6 and made huge changes focused at ease-of-use. The idea was to leverage the latest language features such as annotations and generics and modernize how Servlets can be written. The web.xml was made as optional as possible. Servet 3.1 (JSR 340), scheduled to be part of Java EE 7, is an incremental release focusing on couple of key features and some clarifications in the specification. The main features of Servlet 3.1 are explained below: Non-blocking I/O - Servlet 3.0 allowed asynchronous request processing but only traditional I/O was permitted. This can restrict scalability of your applications. Non-blocking I/O allow to build scalable applications. TOTD #188 provide more details about how non-blocking I/O can be done using Servlet 3.1. HTTP protocol upgrade mechanism - Section 14.42 in the HTTP 1.1 specification (RFC 2616) defines an upgrade mechanism that allows to transition from HTTP 1.1 to some other, incompatible protocol. The capabilities and nature of the application-layer communication after the protocol change is entirely dependent upon the new protocol chosen. After an upgrade is negotiated between the client and the server, the subsequent requests use the new chosen protocol for message exchanges. A typical example is how WebSocket protocol is upgraded from HTTP as described in Opening Handshake section of RFC 6455. The decision to upgrade is made in Servlet.service method. This is achieved by adding a new method: HttpServletRequest.upgrade and two new interfaces: javax.servlet.http.HttpUpgradeHandler and javax.servlet.http.WebConnection. TyrusHttpUpgradeHandler shows how WebSocket protocol upgrade is done in Tyrus (Reference Implementation for Java API for WebSocket). Security enhancements Applying run-as security roles to #init and #destroy methods Session fixation attack by adding HttpServletRequest.changeSessionId and a new interface HttpSessionIdListener. You can listen for any session id changes using these methods. Default security semantic for non-specified HTTP method in <security-constraint> Clarifying the semantics if a parameter is specified in the URI and payload Miscellaneous ServletResponse.reset clears any data that exists in the buffer as well as the status code, headers. In addition, Servlet 3.1 will also clears the state of calling getServletOutputStream or getWriter. ServletResponse.setCharacterEncoding: Sets the character encoding (MIME charset) of the response being sent to the client, for example, to UTF-8. Relative protocol URL can be specified in HttpServletResponse.sendRedirect. This will allow a URL to be specified without a scheme. That means instead of specifying "http://anotherhost.com/foo/bar.jsp" as a redirect address, "//anotherhost.com/foo/bar.jsp" can be specified. In this case the scheme of the corresponding request will be used. Clarification in HttpServletRequest.getPart and .getParts without multipart configuration. Clarification that ServletContainerInitializer is independent of metadata-complete and is instantiated per web application. A complete replay of What's New in Servlet 3.1: An Overview from JavaOne 2012 can be seen here (click on CON6793_mp4_6793_001 in Media). Each feature will be added to the JSR subject to EG approval. You can share your feedback to [email protected]. Here are some more references for you: Servlet 3.1 Public Review Candidate Downloads Servlet 3.1 PR Candidate Spec Servlet 3.1 PR Candidate Javadocs Servlet Specification Project JSR Expert Group Discussion Archive Java EE 7 Specification Status Several features have already been integrated in GlassFish 4 Promoted Builds. Have you tried any of them ? Here are some other Java EE 7 primers published so far: Concurrency Utilities for Java EE (JSR 236) Collaborative Whiteboard using WebSocket in GlassFish 4 (TOTD #189) Non-blocking I/O using Servlet 3.1 (TOTD #188) What's New in EJB 3.2 ? JPA 2.1 Schema Generation (TOTD #187) WebSocket Applications using Java (JSR 356) Jersey 2 in GlassFish 4 (TOTD #182) WebSocket and Java EE 7 (TOTD #181) Java API for JSON Processing (JSR 353) JMS 2.0 Early Draft (JSR 343) And of course, more on their way! Do you want to see any particular one first ?

  Read the article

• Broken Views

  - by Ajarn Mark Caldwell

  “SELECT *” isn’t just hazardous to performance, it can actually return blatantly wrong information. There are a number of blog posts and articles out there that actively discourage the use of the SELECT * FROM …syntax.  The two most common explanations that I have seen are: Performance:  The SELECT * syntax will return every column in the table, but frequently you really only need a few of the columns, and so by using SELECT * your are retrieving large volumes of data that you don’t need, but the system has to process, marshal across tiers, and so on.  It would be much more efficient to only select the specific columns that you need. Future-proof:  If you are taking other shortcuts in your code, along with using SELECT *, you are setting yourself up for trouble down the road when enhancements are made to the system.  For example, if you use SELECT * to return results from a table into a DataTable in .NET, and then reference columns positionally (e.g. myDataRow[5]) you could end up with bad data if someone happens to add a column into position 3 and skewing all the remaining columns’ ordinal position.  Or if you use INSERT…SELECT * then you will likely run into errors when a new column is added to the source table in any position. And if you use SELECT * in the definition of a view, you will run into a variation of the future-proof problem mentioned above.  One of the guys on my team, Mike Byther, ran across this in a project we were doing, but fortunately he caught it while we were still in development.  I asked him to put together a test to prove that this was related to the use of SELECT * and not some other anomaly.  I’ll walk you through the test script so you can see for yourself what happens. We are going to create a table and two views that are based on that table, one of them uses SELECT * and the other explicitly lists the column names.  The script to create these objects is listed below. IF OBJECT_ID('testtab') IS NOT NULL DROP TABLE testtabgoIF OBJECT_ID('testtab_vw') IS NOT NULL DROP VIEW testtab_vwgo IF OBJECT_ID('testtab_vw_named') IS NOT NULL DROP VIEW testtab_vw_namedgo CREATE TABLE testtab (col1 NVARCHAR(5) null, col2 NVARCHAR(5) null)INSERT INTO testtab(col1, col2)VALUES ('A','B'), ('A','B')GOCREATE VIEW testtab_vw AS SELECT * FROM testtabGOCREATE VIEW testtab_vw_named AS SELECT col1, col2 FROM testtabgo Now, to prove that the two views currently return equivalent results, select from them. SELECT 'star', col1, col2 FROM testtab_vwSELECT 'named', col1, col2 FROM testtab_vw_named OK, so far, so good.  Now, what happens if someone makes a change to the definition of the underlying table, and that change results in a new column being inserted between the two existing columns?  (Side note, I normally prefer to append new columns to the end of the table definition, but some people like to keep their columns alphabetized, and for clarity for later people reviewing the schema, it may make sense to group certain columns together.  Whatever the reason, it sometimes happens, and you need to protect yourself and your code from the repercussions.) DROP TABLE testtabgoCREATE TABLE testtab (col1 NVARCHAR(5) null, col3 NVARCHAR(5) NULL, col2 NVARCHAR(5) null)INSERT INTO testtab(col1, col3, col2)VALUES ('A','C','B'), ('A','C','B')goSELECT 'star', col1, col2 FROM testtab_vwSELECT 'named', col1, col2 FROM testtab_vw_named I would have expected that the view using SELECT * in its definition would essentially pass-through the column name and still retrieve the correct data, but that is not what happens.  When you run our two select statements again, you see that the View that is based on SELECT * actually retrieves the data based on the ordinal position of the columns at the time that the view was created.  Sure, one work-around is to recreate the View, but you can’t really count on other developers to know the dependencies you have built-in, and they won’t necessarily recreate the view when they refactor the table. I am sure that there are reasons and justifications for why Views behave this way, but I find it particularly disturbing that you can have code asking for col2, but actually be receiving data from col3.  By the way, for the record, this entire scenario and accompanying test script apply to SQL Server 2008 R2 with Service Pack 1. So, let the developer beware…know what assumptions are in effect around your code, and keep on discouraging people from using SELECT * syntax in anything but the simplest of ad-hoc queries. And of course, let’s clean up after ourselves.  To eliminate the database objects created during this test, run the following commands. DROP TABLE testtabDROP VIEW testtab_vwDROP VIEW testtab_vw_named

  Read the article

• post xml to Spring REST server returns Unsupported Media Type

  - by Mayra

  I'm trying to create a simple spring based webservice that supports a "post" with xml content. In spring, I define an AnnotationMethodHandler: <bean id="inboundMessageAdapter" class="org.springframework.web.servlet.mvc.annotation.AnnotationMethodHandlerAdapter"> <property name="messageConverters"> <util:list> <bean class="org.springframework.http.converter.xml.MarshallingHttpMessageConverter"> <property name="marshaller" ref="xmlMarshaller"/> <property name="unmarshaller" ref="xmlMarshaller"/> </bean> </util:list> </property> </bean> And a jaxb based xml marshaller: <bean id="xmlMarshaller" class="org.springframework.oxm.jaxb.Jaxb2Marshaller"> <property name="contextPaths"> <array> <value>com.company.schema</value> </array> </property> <property name="schemas"> <array> <value>classpath:core.xsd</value> </array> </property> </bean> My controller is annotated as follows, where "Resource" is a class autogenerated by jaxb: @RequestMapping(method = POST, value = "/resource") public Resource createResource(@RequestBody Resource resource) { // do work } The result of a webservice call is always "HTTP/1.1 415 Unsupported Media Type". Here is an example service call: HttpPost post = new HttpPost(uri); post.addHeader("Accept", "application/xml"); post.addHeader("Content-Type", "application/xml"); StringEntity entity = new StringEntity(request, "UTF-8"); entity.setContentType("application/xml"); post.setEntity(entity); It seems to me that I am setting the correct media type everywhere possible. Anyone have an ideas?

  Read the article

• Cant insert row with auto-increment key via FluentNhibernate

  - by Jeff Shattock

  I'm getting started with Fluent NHibernate, and NHibernate in general. I'm trying to do something that I feel is pretty basic, but I cant quite get it to work. I'm trying to add a new entry to a simple table. Here's the Entity class. public class Product { public Product() { id = 0; } public virtual int id {get; set;} public virtual string description { get; set; } } Here's its mapping. public class ProductMap : ClassMap<Product> { public ProductMap() { Id(p => p.id).GeneratedBy.Identity().UnsavedValue(0); Map(p => p.description); } } I've tried that with and without the additional calls after Id(). And the insert code: var p = new Product() { description = "Apples" }; using (var s = _sf.CreateSession()) { s.Save(new_product); s.Flush(); } where _sf is a properly configured SessionSource. When I execute this code, I get: NHibernate.AssertionFailure : null identifier, which makes sense based on the SQL that NHibernate is executing: INSERT INTO "Product" (description) VALUES (@p0);@p0 = 'Apples' It doesnt seem to be trying to set the Id field, which seems ok (on its face) since the DB should generate that. But its not, I think. The DB schema is autogenerated by FNH: var config = Fluently.Configure().Database(MsSqlCeConfiguration.Standard.ShowSql().ConnectionString(@"Data Source=Database1.sdf")); var SessionSource = new SessionSource(config.BuildConfiguration().Properties, new ModelMappings()); var Session = SessionSource.CreateSession(); SessionSource.BuildSchema(Session); CreateInitialData(Session); Session.Flush(); Session.Clear(); I'm sure to be doing tons of things wrong, but whats the one thats causing this error?

  Read the article

• ActionMailer and Exchange

  - by Jason Nerer

  Hello Community, I successfully send Mails via SMTP using my Rails App and my Postfix Server. Now I need to move to an Exchange: Microsoft ESMTP MAIL Service, Version: 6.0.3790.3959 that has POP3 and SMTP support enabled. I use actionmailer 1.2.5 and am not able to successfully login to the server while trying to send a mail. In case I use Mail.app sending and recieving works fine as long as I change the authentication schema to "Password". Checking the server looks like so: READ Nov 18 10:37:00.509 [kCFStreamSocketSecurityLevelNone] -- host:mail.my-mail-server-domain.com -- port:25 -- socket:0x11895cf20 -- thread:0x11b036a10 250-mail.my-mail-server-domain.com Hello [xxx.xxx.xxx.xxx] 250-TURN 250-SIZE 250-ETRN 250-PIPELINING 250-DSN 250-ENHANCEDSTATUSCODES 250-8bitmime 250-BINARYMIME 250-CHUNKING 250-VRFY 250-X-EXPS GSSAPI NTLM LOGIN 250-X-EXPS=LOGIN 250-AUTH GSSAPI NTLM LOGIN 250-AUTH=LOGIN 250-X-LINK2STATE 250-XEXCH50 250 OK WROTE Nov 18 10:37:00.852 [kCFStreamSocketSecurityLevelNone] -- host:mail.my-mail-server-domain.com -- port:25 -- socket:0x11895cf20 -- thread:0x11b036a10 AUTH LOGIN READ Nov 18 10:37:01.848 [kCFStreamSocketSecurityLevelNone] -- host:mail.my-mail-server-domain.com -- port:25 -- socket:0x11895cf20 -- thread:0x11b036a10 235 2.7.0 Authentication successful. So authentication method :login seems to be properly supported. Now when it comes to my configuration for actionmailer it looks like so: ActionMailer::Base.server_settings = { :address => "mail.my-mail-server-domain.com", :port => 25, :domain => "my-mail-server-domain.com", :authentication => :login, :user_name => "myusername", :password => "mypassword" } And I get authentication errors over and over. I also tried to change :user_name => "my-mail-server-domain.com\myusername" :user_name => "my-mail-server-domain.com\\myusername" :user_name => "myusername/my-mail-server-domain.com" :user_name => "[email protected]" but nothing works. Can anyone help me? Regards. Jason

  Read the article

• How to populate Java (web) application with initial data using Spring/JPA/Hibernate

  - by Tuukka Mustonen

  I want to setup my database with initial data programmatically. I want to populate my database for development runs, not for testing runs (it's easy). The product is built on top of Spring and JPA/Hibernate. Developer checks out the project Developer runs command/script to setup database with initial data Developer starts application (server) and begins developing/testing then: Developer runs command/script to flush the database and set it up with new initial data because database structures or the initial data bundle were changed What I want is to setup my environment by required parts in order to call my DAOs and insert new objects into database. I do not want to create initial data sets in raw SQL, XML, take dumps of database or whatever. I want to programmatically create objects and persist them in database as I would in normal application logic. One way to accomplish this would be to start up my application normally and run a special servlet that does the initialization. But is that really the way to go? I would love to execute the initial data setup as Maven task and I don't know how to do that if I take the servlet approach. There is somewhat similar question. I took a quick glance at the suggested DBUnit and Unitils. But they seem to be heavily focused in setting up testing environments, which is not what I want here. DBUnit does initial data population, but only using xml/csv fixtures, which is not what I'm after here. Then, Maven has SQL plugin, but I don't want to handle raw SQL. Maven also has Hibernate plugin, but it seems to help only in Hibernate configuration and table schema creation (not in populating db with data). How to do this?

  Read the article

• curl POST to RESTful services

  - by Sashikiran Challa

  Hello All, There are a lot of questions on Stackoverflow about curl but I could not figure out what is that I am doing what I am not supposed to. I am trying to call a RESTful service that I had written using Jersey API and am trying to POST an xml string to it and I get HTTP 415 error which is supposed to be a Media Type error. Here in my shell script call to 1st service: abc=curl http://gf...:8080/InChItoD/inchi/3dstructure?InChIstring=$inchi echo $abc (this works fine the output that it returns is given below.) Posting this xml string to second service def= curl -d $abc -H "Content-Type:text/xml" http://gf...:8080/XML2G/xml3d/gssinput I get the following error: ... ... HTTP Status 415 Status report message description.The server refused this request because the request entity is in a format not supported by the requested resource for the requested method ().Apache Tomcat/6.0.26 This is a sample of xml string I am trying to POST <?xml version="1.0"?><molecule xmlns="http://www.xml-cml.org/schema"> <atomArray> <atom id="a1" elementType="N" formalCharge="1" x3="0.997963" y3="-0.002882" z3="-0.004222"/> <atom id="a2" elementType="H" x3="2.024650" y3="-0.002674" z3="0.004172"/> <atom id="a3" elementType="H" x3="0.655444" y3="0.964985" z3="0.004172"/> <atom id="a4" elementType="H" x3="0.649003" y3="-0.496650" z3="0.825505"/> <atom id="a5" elementType="H" x3="0.662767" y3="-0.477173" z3="-0.850949"/> </atomArray> <bondArray> <bond atomRefs2="a1 a2" order="1"/> <bond atomRefs2="a1 a3" order="1"/> <bond atomRefs2="a1 a4" order="1"/> <bond atomRefs2="a1 a5" order="1"/> </bondArray></molecule> Thanks in advance

  Read the article

• Problem loading Oracle client libraries when running in a NAnt build

  - by Chris Farmer

  I am trying to use dbdeploy to manage Oracle schema changes. I can run it successfully from the command line to get it to generate my change scripts, but when I try to execute it via the dbdeploy NAnt task running through TeamCity, I get an error: System.Data.OracleClient requires Oracle client software version 8.1.7 or greater. I do have the Oracle 10.2.0.2 client software installed. It's the first entry in the system path, and the dbdeploy.exe app is able to successfully negotiate an Oracle connection. The dbdeploy code dynamically loads the System.Data.OracleClient assembly, which in-turn tries to use the Oracle client bits to talk to the database. This is what is failing in my NAnt environment. I have verified the following points: The same user identity is running the process in both cases The same working directory is used in both cases The same dbdeploy code is running in both cases and with the same supplied parameters The same database connection string is being used in both cases The same ADO.NET assembly is being dynamically loaded in both cases (System.Data.OracleClient, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=b77a5c561934e089) Here's the top of the stack trace during the error: at System.Data.OracleClient.OCI.DetermineClientVersion() at System.Data.OracleClient.OracleInternalConnection.OpenOnLocalTransaction (String userName, String password, String serverName, Boolean integratedSecurity, Boolean unicode, Boolean omitOracleConnectionName) at System.Data.OracleClient.OracleInternalConnection..ctor( OracleConnectionString connectionOptions) at System.Data.OracleClient.OracleConnectionFactory.CreateConnection( DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningObject) at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection( DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) at System.Data.ProviderBase.DbConnectionPool.CreateObject( DbConnection owningObject) at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest( DbConnection owningObject) at System.Data.ProviderBase.DbConnectionPool.GetConnection( DbConnection owningObject) at System.Data.ProviderBase.DbConnectionFactory.GetConnection( DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionClosed.OpenConnection( DbConnection outerConnection, DbConnectionFactory connectionFactory) at System.Data.OracleClient.OracleConnection.Open() at Net.Sf.Dbdeploy.Database.DatabaseSchemaVersionManager. GetCurrentVersionFromDb() My main question is this: how can I discover what's different about these running environments to see why my Oracle client software can't be loaded?

  Read the article

• "If not exists" fails on SQL CE

  - by Mark Evans

  Hi I've got an unexpected problem. I'm making a script to update the schema on a SQL CE database. This won't run: if not exists ( Select column_name from information_schema.columns where column_name = 'TempTestField' and table_name = 'Inventory_Master_File' ) Alter table Inventory_Master_File add TempTestField nvarchar(10) null I think this is because I'm using stuff that isn't supported in SQL CE. Anyone know how to do this? I've tried rearranging the script and can't get anything to work. I tried "alter table ... where not exists ...". Note that the "select" part runs fine and also the "alter" part. The problem is "if not exists". I know there are some other postings regarding problems like this using SQL CE but I couldn't find an answer to this particular problem. Cheers Mark UPDATE: I've spent over an hour looking for a solution. I've found many postings asking for help with similar problems but I've still got no idea how to fix it. I really don't want to do this in C# code. I need to do this in a SQL script. I can't believe something this basic is causing so much difficulty :(

  Read the article

• How to solve validation error on xsi:noNamespaceSchemaLocation in jdoconfig.xml

  - by mamuso

  Since I updated today to GAE 1.7.2.1, I'm having validation errors in eclipse in all my jdoconfig.xml files. I have the default jdoconfig.xml content : [...] <jdoconfig xmlns="http://java.sun.com/xml/ns/jdo/jdoconfig" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://java.sun.com/xml/ns/jdo/jdoconfig"> [...] And eclipse validation throws: Referenced file contains errors (http://java.sun.com/xml/ns/jdo/jdoconfig). For more information, right click on the message in the Problems View and select "Show Details..." When clicking on details I can see a bunch of lines like: s4s-elt-character: Non-whitespace characters are not allowed in schema elements other than 'xs:appinfo' and 'xs:documentation'. Saw 'var_U = "undefined";'. In different lines and different content in "Saw ... " It occurs in every single project I start using the "New Web Application Project..." from the google plugin. So does anyone have this problem? Any fix?

  Read the article

• BizTalk WCF Service

  - by WtFudgE

  Hi, I am getting an error in my event viewer after deploying a wcf service on our server. The Messaging Engine received an error from transport adapter "WCF-BasicHttp" when notifying the adapter with the BatchComplete event. Reason "Value does not fall within the expected range.". The thing is, this service was running before and worked fine. I just modified a schema a bit, undeployed the service and redeployed. When I then talk to this service the event viewer shows me this message. If I deploy the same service locally it works fine. Also if I browse to my service with explorer it shows no errors. Normally when the receive location is wrong or the used user isn't in the isolated biztalk usergroup it gives an error here, but this isn't the case. Anyone have any idea what I should do? My problem is pretty urgent.. I googled my errormessage but without much success. Thanks yall

  Read the article

• Castle ActiveRecord "Could not compile the mapping document: (string)"

  - by Nick

  Hi I am having getting an exception when trying to initialize ActiveRecord and I cannot figure out what I am missing. I am trying to convince the company I work for to use Castle ActiveRecord and it won't look good if I can't demonstrate how it works. I have work on projects before with Castle ActiveRecord and I had never experience this problem before. Thanks for your help The exception that I get is Stack Trace: at Castle.ActiveRecord.ActiveRecordStarter.AddXmlString(Configuration config, String xml, ActiveRecordModel model) at Castle.ActiveRecord.ActiveRecordStarter.AddXmlToNHibernateCfg(ISessionFactoryHolder holder, ActiveRecordModelCollection models) at Castle.ActiveRecord.ActiveRecordStarter.RegisterTypes(ISessionFactoryHolder holder, IConfigurationSource source, IEnumerable`1 types, Boolean ignoreProblematicTypes) at Castle.ActiveRecord.ActiveRecordStarter.Initialize(IConfigurationSource source, Type[] types) at ConsoleApplication1.Program.Main(String[] args) in C:\Projects\CastleDemo\ConsoleApplication1\Program.cs:line 20 at System.AppDomain._nExecuteAssembly(Assembly assembly, String[] args) at System.AppDomain.ExecuteAssembly(String assemblyFile, Evidence assemblySecurity, String[] args) at Microsoft.VisualStudio.HostingProcess.HostProc.RunUsersAssembly() at System.Threading.ThreadHelper.ThreadStart_Context(Object state) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state) at System.Threading.ThreadHelper.ThreadStart() Inner Exception: {"Could not compile the mapping document: (string)"} Below is my configuration file: <add key="connection.driver_class" value="NHibernate.Driver.SqlClientDriver" /> <add key="dialect" value="NHibernate.Dialect.MsSql2000Dialect" /> <add key="connection.provider" value="NHibernate.Connection.DriverConnectionProvider" /> <add key="connection.connection_string" value="Data Source=SPIROS\SQLX;Initial Catalog=CastleDemo;Integrated Security=SSPI" /> <add key="proxyfactory.factory_class" value="NHibernate.ByteCode.Castle.ProxyFactoryFactory, NHibernate.ByteCode.Castle" /> and this is the main method that runs the initialization: static void Main(string[] args) { //Configure ActiveRecord source XmlConfigurationSource source = new XmlConfigurationSource("../../config.xml"); // //Initialazi ActiveRecord ActiveRecordStarter.Initialize( source, typeof(Product)); // //Create Schema ActiveRecordStarter.CreateSchema(); // }

  Read the article

• mysql query to dynamically convert row data to columns

  - by Anirudh Goel

  I am working on a pivot table query. The schema is as follows Sno, Name, District The same name may appear in many districts eg take the sample data for example 1 Mike CA 2 Mike CA 3 Proctor JB 4 Luke MN 5 Luke MN 6 Mike CA 7 Mike LP 8 Proctor MN 9 Proctor JB 10 Proctor MN 11 Luke MN As you see i have a set of 4 distinct districts (CA, JB, MN, LP). Now i wanted to get the pivot table generated for it by mapping the name against districts Name CA JB MN LP Mike 3 0 0 1 Proctor 0 2 2 0 Luke 0 0 3 0 i wrote the following query for this select name,sum(if(District="CA",1,0)) as "CA",sum(if(District="JB",1,0)) as "JB",sum(if(District="MN",1,0)) as "MN",sum(if(District="LP",1,0)) as "LP" from district_details group by name However there is a possibility that the districts may increase, in that case i will have to manually edit the query again and add the new district to it. I want to know if there is a query which can dynamically take the names of distinct districts and run the above query. I know i can do it with a procedure and generating the script on the fly, is there any other method too? I ask so because the output of the query "select distinct(districts) from district_details" will return me a single column having district name on each row, which i will like to be transposed to the column.

  Read the article

• BizTalk Business Rules Engine - Repeating Elements Question

  - by Andrew Cripps

  Hello I'm trying to create what I think should be a relatively simple business rule to operate over repeating elements in an XML schema. Consider the following XML snippet (this is simplified with namespaces removed, for readability): <Root> <AllAccounts> <Account id="1" currentPayment="10.00" arrearsAmount="25.00"> <AllCustomers> <Customer id="20" primary="true" canSelfServe="false" /> <Customer id="21" primary="false" canSelfServe="false" /> </AllCustomers> </Account> <Account id="2" currentPayment="10.00" arrearsAmount="15.00"> <AllCustomers> <Customer id="30" primary="true" canSelfServe="false" /> <Customer id="31" primary="false" canSelfServe="false" /> </AllCustomers> </AllAccounts> </Root> What I want to do is to have two rules: Set /Root/AllAccounts/Account[x]/AllCustomers/Customer[primary='true']/canSelfServe = true IF arrearsAmount < currentPayment Set /Root/AllAccounts/Account[x]/AllCustoemrs/Customer[primary='true']/canSelfServer = false IF arrearsAmount = currentPayment Where [x] is 0...number of /Root/AllAccounts/Account records present in the XML. I've tried two simple rules for this, and each rule seems to fire x * x times, where x is the number of Account records in the XML. I only want each rule to fire once for each Account record. Any help greatly appreciated! Thanks Andrew

  Read the article

• python sqlite3 won't execute a join, but sqlite3 alone will

  - by Francis Davey

  Using the sqlite3 standard library in python 2.6.4, the following query works fine on sqlite3 command line: select segmentid, node_t, start, number,title from ((segments inner join position using (segmentid)) left outer join titles using (legid, segmentid)) left outer join numbers using (start, legid, version); But If I execute it via the sqlite3 library in python I get an error: >>> conn=sqlite3.connect('data/test.db') >>> conn.execute('''select segmentid, node_t, start, number,title from ((segments inner join position using (segmentid)) left outer join titles using (legid, segmentid)) left outer join numbers using (start, legid, version)''') Traceback (most recent call last): File "<stdin>", line 1, in <module> sqlite3.OperationalError: cannot join using column start - column not present in both tables The (computed) table on the left hand side of the join appears to have the relevant column because if I check it by itself I get: >>> conn.execute('''select * from ((segments inner join position using (segmentid)) left outer join titles using (legid, segmentid)) limit 20''').description (('segmentid', None, None, None, None, None, None), ('html', None, None, None, None, None, None), ('node_t', None, None, None, None, None, None), ('legid', None, None, None, None, None, None), ('version', None, None, None, None, None, None), ('start', None, None, None, None, None, None), ('title', None, None, None, None, None, None)) My schema is: CREATE TABLE leg (legid integer primary key, t char(16), year char(16), no char(16)); CREATE TABLE numbers ( number char(16), legid integer, version integer, start integer, end integer, prev integer, prev_number char(16), next integer, next_number char(16), primary key (number, legid, version)); CREATE TABLE position ( segmentid integer, legid integer, version integer, start integer, primary key (segmentid, legid, version)); CREATE TABLE 'segments' (segmentid integer primary key, html text, node_t integer); CREATE TABLE titles (legid integer, segmentid integer, title text, primary key (legid, segmentid)); CREATE TABLE versions (legid integer, version integer, primary key (legid, version)); CREATE INDEX idx_numbers_start on numbers (legid, version, start); I am baffled as to what I am doing wrong. I have tried quitting/restarting both the python and sqlite command lines and can't see what I'm doing wrong. It may be completely obvious.

  Read the article

• mysql - query group/concat question??

  - by tom smith

  I have a situation where I return results with mutiple rows. I'm looking for aw way to return a single row, with the multiple items in separate cols within the row. My initial query: SELECT a.name, a.city, a.address, a.abbrv, b.urltype, b.url FROM jos__universityTBL as a LEFT JOIN jos__university_urlTBL as b on b.universityID = a.ID WHERE a.stateVAL = 'CA' ...my output: | University Of Southern Califor | Los Angeles | | usc | 2 | http://web-app.usc.edu/ws/soc/api/ | | University Of Southern Califor | Los Angeles | | usc | 4 | http://web-app.usc.edu/ws/soc/api/ | | University Of Southern Califor | Los Angeles | | usc | 1 | www.usc.edu | | San Jose State University | San Jose | | sjsu | 2 | http://info.sjsu.edu/home/schedules.html | | San Jose State University | San Jose | | sjsu | 4 | https://cmshr.sjsu.edu/psp/HSJPRDF/EMPLOYEE/HSJPRD/c/COMMUNITY_ACCESS.CLASS_SEARCH.GBL?FolderPath=PORTAL_ROOT_OBJECT.PA_HC_CLASS_SEARCH | | San Jose State University | San Jose | | sjsu | 1 | www.sjsu.edu My tbl schema... mysql> describe jos_universityTBL; +----------------+--------------+------+-----+---------+----------------+ | Field | Type | Null | Key | Default | Extra | +----------------+--------------+------+-----+---------+----------------+ | name | varchar(50) | NO | UNI | | | | repos_dir_name | varchar(50) | NO | | | | | city | varchar(20) | YES | | | | | stateVAL | varchar(5) | NO | | | | | address | varchar(50) | NO | | | | | abbrv | varchar(20) | NO | | | | | childtbl | varchar(200) | NO | | | | | userID | int(10) | NO | | 0 | | | ID | int(10) | NO | PRI | NULL | auto_increment | +----------------+--------------+------+-----+---------+----------------+ 9 rows in set (0.00 sec) mysql> describe jos_university_urlTBL; +--------------+--------------+------+-----+---------+----------------+ | Field | Type | Null | Key | Default | Extra | +--------------+--------------+------+-----+---------+----------------+ | universityID | int(10) | NO | | 0 | | | urltype | int(5) | NO | | 0 | | | url | varchar(200) | NO | MUL | | | | actionID | int(5) | YES | | 0 | | | status | int(5) | YES | | 0 | | | ID | int(10) | NO | PRI | NULL | auto_increment | +--------------+--------------+------+-----+---------+----------------+ 6 rows in set (0.00 sec) I'm really trying to get something like: |<<the concated urltype-url >>| ucs | losangeles | usc.edu | 1-u1 | 2-u2 | 3-u2 | Any pointers would be helpful!

  Read the article

• [Linq to SQL] Multiple foreign keys to the same table

  - by cdonner

  I have a reference table with all sorts of controlled value lookup data for gender, address type, contact type, etc. Many tables have multiple foreign keys to this reference table I also have many-to-many association tables that have two foreign keys to the same table. Unfortunately, when these tables are pulled into a Linq model and the DBML is generated, SQLMetal does not look at the names of the foreign key columns, or the names of the constraints, but only at the target table. So I end up with members called Reference1, Reference2, ... not very maintenance-friendly. Example: <Association Name="tb_reference_tb_account" Member="tb_reference" <====== ThisKey="shipping_preference_type_id" OtherKey="id" Type="tb_reference" IsForeignKey="true" /> <Association Name="tb_reference_tb_account1" Member="tb_reference1" <====== ThisKey="status_type_id" OtherKey="id" Type="tb_reference" IsForeignKey="true" /> I can go into the DBML and manually change the member names, of course, but this would mean I can no longer round-trip my database schema. This is not an option at the current stage of the model, which is still evolving. Splitting the reference table into n individual tables is also not desirable. I can probably write a script that runs against the XML after each generation and replaces the member name with something derived from ThisKey (since I adhere to a naming convention for these types of keys). Has anybody found a better solution to this problem?

  Read the article

• Fluent nhibernate: Enum in composite key gets mapped to int when I need string

  - by Quintin Par

  By default the behaviour of FNH is to map enums to its string in the db. But while mapping an enum as part of a composite key, the property gets mapped as int. e.g. in this case public class Address : Entity { public Address() { } public virtual AddressType Type { get; set; } public virtual User User { get; set; } Where AddresType is of public enum AddressType { PRESENT, COMPANY, PERMANENT } The FNH mapping is as mapping.CompositeId().KeyReference(x => x.User, "user_id").KeyProperty(x => x.Type); the schema creation of this mapping results in create table address ( Type INTEGER not null, user_id VARCHAR(25) not null, and the hbm as <composite-id mapped="true" unsaved-value="undefined"> <key-property name="Type" type="Company.Core.AddressType, Company.Core, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null"> <column name="Type" /> </key-property> <key-many-to-one name="User" class="Company.Core.CompanyUser, Company.Core, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null"> <column name="user_id" /> </key-many-to-one> </composite-id> Where the AddressType should have be generated as type="FluentNHibernate.Mapping.GenericEnumMapper`1[[Company.Core.AddressType, How do I instruct FNH to mappit as the default string enum generic mapper?

  Read the article

• Preserving Language across inline Calculated Members in SSAS

  - by Tullo

  Problem: I need to retrieve the language of a given cell from the cube. The cell is defined by code-generated MDX, which can have an arbitrary level of indirection as far as calculated members and sets go (defined in the WITH clause). SSAS appears to ignore the Language of the specified members when you declare a calculated member inline in the query. Example: The cube's default locale is 1033 (en-US) The cube contains a Calculated Measure called [Net Pounds] which is defined as [Net Amt], language=2057 (en-GB) The query requests this measure alongside an inline calculated measure which is simply an alias to the [Net Pounds] When used directly, the measure is formatted in the en-GB locale, but when aliased, the measure falls back to using the cube default of en-US. Here's what the query looks like: WITH MEMBER [Measures].[Pounds Indirect] AS [Measures].[Net Pounds] SELECT { [Measures].[Pounds Indirect], [Measures].[Net Pounds] } ON AXIS (0) FROM [Cube] CELL PROPERTIES language, value, formatted_value The query returns the expected two cells, but only uses the [Net Pounds] locale when used directly. Is there an option or switch somewhere in SSAS that will allow locale information to be visible in calculated members? I realise that it is possible to declare the inline calculated member in a particular locale, but this would involve extracting the locale from the tuple first, which (since the cube's member is isolated in the application's query schema) is unknown.

  Read the article

• Database Change Management - Setup for Initial Create Scripts, Subsequent Migration Scripts

  - by Martin Aatmaa

  I've got a database change management workflow in place. It's based on SQL scripts (so, it's not a managed code-based solution). The basic setup looks like this: Initial/ Generate Initial Schema.sql Generate Initial Required Data.sql Generate Initial Test Data.sql Migration 0001_MigrationScriptForChangeOne.sql 0002_MigrationScriptForChangeTwo.sql ... The process to spin up a database is to then run all the Initlal scripts, and then run the sequential Migration scripts. A tool takes case of the versioning requirements, etc. My question is, in this kind of setup, is it useful to also maintain this: Current/ Stored Procedures/ dbo.MyStoredProcedureCreateScript.sql ... Tables/ dbo.MyTableCreateScript.sql ... ... By "this" I mean a directory of scripts (separated by object type) that represents the create scripts for spinning up the current/latest version of the database. For some reason, I really like the idea, but I can't concretely justify it's need. Am I missing something? The advantages would be: For dev and source control, we would have the same object-per-file setup that we're used to For deployment, we can spin up a new DB instance to the latest version either by running the Initial+Migrate, or by running the scripts from Current/ For dev, we do not need a DB instance running in order to do development. We can do "offline" development on the Current/ folder. The disadvantages would be: For each change, we need to update the scripts in the Current/ folder, as well as create a Migration script (in the Migration/ folder) Thanks in advance for any input!

  Read the article

< Previous Page | 498 499 500 501 502 503 504 505 506 507 508 509  | Next Page >