Search Results

Search found 19365 results on 775 pages for 'machine vision'.

Page 503/775 | < Previous Page | 499 500 501 502 503 504 505 506 507 508 509 510  | Next Page >

  • Where is debian storing its network settings?

    - by user13743
    I have a debian machine that is supposed to have a static ip, but insists on getting its address from the DHCP server. Here's this settings file: $> cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface allow-hotplug eth0 iface eth0 inet static address 192.168.1.99 gateway 192.168.1.1 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 Yet $> sudo /etc/init.d/networking restart Reconfiguring network interfaces...done. $> sudo ifconfig eth0 Link encap:Ethernet HWaddr 00:e0:03:09:05:2e inet addr:192.168.1.205 Bcast:255.255.255.255 Mask:255.255.255.0 ... Where is it being told to use dhcp?

    Read the article

  • Ugly Boot Screen after upgrading to 12.10

    - by Sir Linuxalot
    Is there a way to change the ugly boot screen in 12.10? It seems to have rolled back to that 8-bit blocky looking thing with tiny orange dots underneath. It then breaks into process code under that, and it looks ghastly. I've read some tutorials on getting Plymouth to do some neat things, but they were for older versions of Ubuntu. I'm running a GeForce GTX 460 if that matters. Any help would be appreciated. Update: I've noticed/found a couple of things. The upgrade on my laptop didn't do this. It still uses the "normal" Ubuntu boot logo (using Plymouth, I assume). So, something is off with my desktop. And, I found and installed Super Boot Manager to see if that would help. With that, I enabled Plymouth and added a new theme, but the machine still boots with the block-ugly logo. Finally, I messed around with Grub on boot and added "nomodeset" after "quiet splash" and added it while deleting "quiet splash." None of these solutions worked. I'll keep hunting...

    Read the article

  • ESXi 4.0u1 - backup/copy options

    - by Hanadarko
    I have a machine built using ESXi 4.0u1 and it has 3 hard drives. I have my hosts built on different hard drives but wondering about backup options. I do not have RAID but I have 3 drives and 1 is totally empty. I had been using it to store ISOs for loading. So what options do I have to either create a 1 time copy onto the spare drive or some sort of snapshot to the spare drive? - There must be some way to do this either via the vsphere client or ssh into the ESXi box and go from there. Thoughts? -JD

    Read the article

  • How to detect when a user copies files from a server over the network?

    - by Mr. Graves
    I have a few virtual servers + desktops that are used for shared development with remote users, including some consultants. Each user has an account with access to most aspects of the server. I don't want to prevent people from being productive, or track passwords or read emails, but I do want to know when and what files they copy from the virtual server or what they upload from the server to a remote site, and what if any applications they install. This will help make sure my IP is protected, that no one is installing tools they shouldn't, and that things are licensed appropriately. What is the simplest way to do this? In order of importance I would say detecting file transfers off the machine to be most critical. Thanks

    Read the article

  • Rail's FileStore with Linux Disk Caching or RAMdisk?

    - by Yo Ludke
    I have a Ruby on Rails application that stores it's catched files on the filesystem (Rails file-system cache). I was thinking about changing to memcached Store, but a short test shows it isn't a big difference in speed. From linuxatemyram.com I learned a bit about file caching. On the current machine there would be around 40..45GB RAM left which isn't needed for the application and which can be used to linux-disk-cache this rails file cache store. The disk is a RAID10 system with almost 120MB disk perfomance. How can I tell Linux to use free RAM more deliberately and not to be shy about using it? Do think it's necessary to adjust a sysyctl/.. value here, or would I have performance advantages to put the File Store root diretory on a ramdisk? (Loosing the cache during a reboot wouldn't be a problem)

    Read the article

  • Implicit OAuth2 endpoint vs. cookies

    - by Jamie
    I currently have an app which basically runs two halves of an API - a restful API for the web app, and a synchronisation API for the native clients (all over SSL). The web app is completely javascript based and is quite similar to the native clients anyway - except it currently does not work offline. What I'm hoping to do is merge the fragmented APIs into a single restful API. The web app currently authenticates by issuing a cookie to the client whereas the native clients work using a custom HMAC access token implementation. Obviously a public/private key scenario for a javascript app is a little pointless. I think the best solution would be to create an OAuth2 endpoint on the API (like Instagram, for example http://instagram.com/developer/authentication/) which is used by both the native apps and the web app. My question is, in terms of security how does an implicit OAuth2 flow compare (storing the access token in local storage) to "secure" cookies? Presumably although SSL solves man in the middle attacks, the user could theoretically grab the access token from local storage and copy it to another machine?

    Read the article

  • /etc/hosts.deny ignored in Ubuntu 14.04

    - by Matt
    I have Apache2 running on Ubuntu 14.04LTS. To begin securing network access to the machine, I want to start by blocking everything, then make specific allow statements for specific subnets to browse to sites hosted in Apache. The Ubuntu Server is installed with no packages selected during install, the only packages added after install are: apt-get update; apt-get install apache2, php5 (with additional php5-modules), openssh-server, mysql-client Following are my /etc/hosts.deny & /etc/hosts.allow settings: /etc/hosts.deny ALL:ALL /etc/hosts.allow has no allow entries at all. I would expect all network protocols to be denied. The symptom is that I can still web browse to sites hosted on the Apache web server even though there is a deny all statement in /etc/hosts.deny The system was rebooted after the deny entry was added. Why would /etc/hosts.deny with ALL:ALL be ignored and allow http browsing to sites hosted on the apache web server?

    Read the article

  • why do Vagrant docs suggest using public IP address 33.33.33.10 for local VMs?

    - by Gert
    I'm following a tutorial to set up vagrant (a tool to build and configure portable virtual machine images), and it seems that vagrant documentation suggests using IPv4 address 33.33.33.10 to configure a new box. That is a publicly routed IP adress, so I'm a bit confused why using this address is suggested. Since I don't own this network, I should not use an address from the 33.33.33.10/8 range. Am I correct in thinking that I should only use either a public address from a network I own, or an address from one of the private ranges as defined in RFC 1918? If so, why does Vagrant documentation suggest otherwise?

    Read the article

  • Can't connect to my FTP server, why?

    - by Joseph
    I have a windows 2008 server running with FTP 7 on IIS 7. I have it configured to connect as it is out of the box, with a particular user (lets say john) with read/write access. When I use my FileZilla client software, I can connect to the server as john just fine. No problems at all. However, when I try to connect using Windows Explorer or using the cmd prompt I get stone walled, saying "Login failed". My client machine is Windows Vista Ultimate. Does anyone know what might be causing this?

    Read the article

  • Site failing randomly - could it be Cloudflare or something weird in the JS?

    - by James
    I've been working on a simple site that uses javascript to fade through some fullscreen background images as well as some other simple animations. I've tested the site on Chrome, Safari, FF and Opera on OSX, IE8+ on Win7 and Chrome & FF on Ubuntu and everything looks as I'd expect it to. However, I've had reports of the site failing to load (stops at the stage where the background fades up) on Safari and Chrome on OSX and Win. I can't replicate this on any setup so I'm finding it impossible to troubleshoot. Google's instant preview shows the site fine as does most of the options at browsershots.org so I'm really scratching my head. I'm running the site's traffic through Cloudflare and I'm wondering whether anyone can see (or knows from other sites) why Cloudflare might be mangling the JS or causing a problem somehow (I don't get any errors in the JS error console). Of course, if you can replicate the problem on your machine and can suggest an area to look at that would be amazing but I'm hoping that, like me, you don't see any problem with the site! Here's the site: http://www.bighornrevelstoke.com Thanks, James

    Read the article

  • eclipse IDE won't start in ubuntu 10.04 64bit with sun-java

    - by aeischeid
    i get this error when I try to run from CLI ** (Eclipse:2318): CRITICAL **: menu_proxy_module_load: assertion `dbusproxy != NULL' failed # A fatal error has been detected by the Java Runtime Environment: # SIGSEGV (0xb) at pc=0x00007f34511a4e74, pid=2318, tid=139863603410704 # JRE version: 6.0_18-b18 Java VM: OpenJDK 64-Bit Server VM (14.0-b16 mixed mode linux-amd64 ) Derivative: IcedTea6 1.8 Distribution: Ubuntu lucid (development branch), package 6b18-1.8-0ubuntu1 Problematic frame: C [libglib-2.0.so.0+0x41e74] g_main_context_prepare+0x164 # An error report file with more information is saved as: /home/aaron/opt/eclipse/hs_err_pid2318.log # If you would like to submit a bug report, please include instructions how to reproduce the bug and visit: https://bugs.launchpad.net/ubuntu/+source/openjdk-6/ The crash happened outside the Java Virtual Machine in native code. See problematic frame for where to report the bug. # I have sun-java installed and set in my PATH: ~: echo $JAVA_HOME /usr/lib/jvm/java-6-sun/

    Read the article

  • KB980408: Fix for Explorer freezing: does anyone know what app caused it?

    - by Ian Boyd
    Microsoft released an update for Windows 7 today (Tuesday, April 27, 2010): KB980408: The April 2010 stability and reliability update for Windows 7 and Windows Server 2008 R2 is available. The update fixes, among other things: Windows Explorer may stop responding for 30 seconds when a file or a directory is created or renamed after certain applications are installed. i'm not experiencing it on my own Windows 7 machine, but two colleagues at work were experiencing the problem. i would really like to know what applications were causing problems. Microsoft will never call out the misbehaving applications. i want to know what software i should be ridiculing and insulting. And avoid in the future. Did anyone who was experiencing this problem isolate the applications?

    Read the article

  • Windows 7 Firewall configuration

    - by Will Calderwood
    I had a PC set up with a VPN. I used the Windows 7 firewall to block all NON-VPN traffic to the internet, but all LAN traffic was allowed. So, with the VPN connected I could connect to all networked machines and the internet. Without the VPN connected I could only connect to the LAN and had no internet access. Unfortunately my drive failed, and I'm setting up the machine again with a replacement drive. I can't for the life of me work out how to set up the firewall again. I can easily set it up to block all NON-VPN traffic, but can't work out how to that and still allow all LAN traffic whether the VPN is connected or not. Some pointers would be useful. Thanks.

    Read the article

  • Dynamic dns client stops updating when login off Windows

    - by Sami-L
    Running a dynamic dns updater software on Windows server 2008 R2, when I log off the software stops updating, I concluded that I have to look for a dynamic dns client running as service, I found this task a bit heavy since there is a big variety on the net, it needs a long time to make the right choice as many details are to pay attention to, free, masked fees, fees, installed on machine, configured on router, trusted, not trusted, compliant with OS, not, ... That's why I am here to ask for help on this matter, I would like to be advised by skilled people, to find a trusted free dns updater (client) for Windows which can run as service, and maybe which can send email when update fails.

    Read the article

  • concrete uses of LDAP?

    - by ajsie
    im new to LDAP. i wonder what are some concrete examples of using LDAP. things that are MUCH more easier to do when you got 3-7 linux computers in a small company network. one use that is very important for me seems to be that you configure LDAP to handle system authentication. then you dont have to create same accounts in all computers. are there other things that are a MUST DO for a small network to save more time? my small network is for apache servers and database servers. and should LDAP be in an own machine? cause i guess its not good to put it in apache or database servers since these are performance dependent.

    Read the article

  • Invalid Html Response and JS Errors when you open your Application in Visual Studio 2013

    - by imran_ku07
     I was working on an application which uses Telerik controls. The application was working fine for a while. Suddenly, the application stopped working. I mean lot of my application pages becoming very very ugly. I found JavaScript errors on every Browser's console. When I check the page view-source, the generated HTML was messy and invalid. This was only happening with my local machine. If someone else on my network accesses my application pages, he will get the correct HTML and no JavaScript errors. My mind was blowing because the same page was generating invalid HTML(and JavaScript errors) when I access the page using a local browser but generate correct HTML(and no JavaScript errors) when someone else access my application page remotely. Then I realized that I the only change I made last was opening my application in Visual Studio 2013 RTM which I installed few days ago. I closed the Visual Studio 2013, everything work like a charm. Then I became100% sure that this is only happening due to new Visual Studio 2013 feature called Browser Link. I just open the application again and add this in web.config. Everything become fine Happy coding :)   <add key="vs:EnableBrowserLink" value="false" />

    Read the article

  • How to repair unbootable Fedora install

    - by Cerin
    How do you repair/reinstall Fedora without deleting any existing partitions or data? I was attempting to upgrade some old Fedora 13 servers to 17, following the instructions in the wiki. After the 14-15 upgrade, rebooting resulted in the output: Dropping to debug shell. sh: can't access tty; job control turned off dracut:/# Running dmesg also shows: dracut Warning: No root device "block:/dev/mapper/VolGroup-lv_root" found Googling shows this error is typically related to some weird RAID issues, but my server is a virtual machine not using any RAID. Using a rescue CD, I can chroot /mnt/sysimage, and all packages and data still seems to be there. How do I make the system bootable again?

    Read the article

  • why udp client work when wirshark capture?

    - by herzl shemuelian
    I have two machine A,B windows 7 os .I connect them end to end and try run a performance test by using tcpreplay. step 1) I check conectivity between to point by netcat In A i run nc -lvup 5432 when I run on B nc -u 1.2.3.4 5432 I can send data from B to A step 2) when in I run tcpreplay in B tcpreplay -i %0 myudp.pcap in A I don't recevice any data . when I open wireshark in A then my nc can read data why? I check dst mac and dst ip in pcap file they are correct. is importan udp src mac or src ip for udp how that I open udp server ?

    Read the article

  • VMWare Hypervisor vSphere 5 - VM static ip from VLAN NAT

    - by Ian Livingstone
    I have a VMWare vSphere 5 Hypervisor server that has a static ip address assigned to it by VLAN that is configured to perform NAT. The static IP is assigned to the bare metal server via the NIC's mac address. I want to setup a guest machine to also have a static ip address, how can I go about having this setup? I have assigned a IP for the guest's MAC Address but it doesn't seem to be working as when I ping the ip address it does not respond. The guest is running ubuntu 10.04 server edition. I am trying to assign it a static public ip address. Any help would be greatly appreciated.

    Read the article

  • open-iscsi does not login into targets on boot

    - by Creshal
    We have a Debian Lenny server with open-iscsi that's configured to log into a target automatically: hostname:~# grep \\.startup /etc/iscsi/iscsid.conf node.startup = automatic hostname:~# grep \\.startup /etc/iscsi/nodes/iqn..../the.correct.ip.address\,port node.startup = automatic node.conn[0].startup = automatic hostname:~# If I issue a restart of open-iscsi via init.d, it works fine. But if I reboot the machine, iscsi starts, but does not even search for targets. I have to manually restart it before it works. Any ideas how to make it find the target on boot?

    Read the article

  • I want to version control my entire slice

    - by Tom
    I'm renting a slice (i.e., a VPS) from Slicehost. I've a spent a day or two filling up /usr with my favorite packages, /etc with configs and init scripts, and so on. Now I want to: save this whole setup somewhere (e.g., to load onto another machine). see what changes I've made to which files revert changes, tag revisions, and all that other good version control stuff Saving a disk image gives me (1), but not (2) and (3). Using Subversion (svn import / svn://someotherhost) might give me all three, but I expect problems if I actually try to check a project out into / and maintain .svn directories in root-owned areas. And to load my setup onto a fresh slice, I'd need to install an svn client on it first. Is there a good way to do what I want to do?

    Read the article

  • Hosting a web site at home: ISP Blocking port 80?

    - by tombull89
    Hello, I presume this is a better place to put this rather than server fault. I'm interested in setting up a small site to host at home as a "proof of concept" exercise, i.e. to prrove that I know how to do it. I've got a (virtual) server 2003 machine with a site on it, all configured with port forwarding through to 80 on my server. I have a Belkin F5D7634 which I have put my DYNDNS details in but when I try to go to my DYNDNS address it comes up with the page cannot be displayed. My ISP is Carphone Warehouse/AOL and I've been unable to find any information if they block port 80. If they do, can anybody reccomend a home provider that does not block port 80? Regards, Tom.

    Read the article

  • MAMP PHP5.3 and 5.4

    - by musoNic80
    I've just downloaded the latest version of MAMP (2.1) but have run into a few issues. I'm developing using Symfony2 which requires php5.3 minimum. It also requires a php accelerator, ideally APC. So, I set MAMP (I'm not using MAMP PRO) to use php 5.4. Problem solved, I thought. Apparently not though. It turns out MAMP have decided not to support APC (or any accelerator as far as I can see) with their 5.4 version apparently due to it being buggy (really?!?!). Ok, so I'll just use 5.3 instead. Apparently not. It turns out that although MAMP has installed 5.3 on my machine I can't select it in the preference pane. I get a choice of 5.2 or 5.4! Is there a workaround for this?

    Read the article

  • starting up with VPS or cloud hosting? [closed]

    - by FlyOn
    Possible Duplicate: How to find web hosting that meets my requirements? Summary: I want to start hosting my product. I'd like to register domains (at some point). I'm a linux beginner. Thinking about scalability and price, I'm thinking am I better off on a VPN to get started or would some form of cloud hosting be better (not being familiar with either). Full question: I'm creating a product where people can create their own 3D representations of whatever data / info they have, and (re)organise that data. The product is coming along beautifully on my local environment, but it's about time I start getting some form of hosting ready, and I could really use some advice where / how to get started: I'd like people to be able to move/register their own domains on my server. I could start without this just to demo the product, but it would be the very first on the todo list. I'd like to automatically copy some files / install databases etc for each domain. I probably want to see if I can let users manage their own subdomains at some points, but for now: I'd like start as simple as possible. I've always on a windows machine, so my linux experience is quite basic. I really don't mind getting into it, but I'm thinking it's better to get my product out first of all and see where to go from there. Although... I'd like things to be scalable. If I set up some reseller VPN now which only scales to 100 domains or so, which means I have to set up something else / move again when I pass that level, or which means that I'm in trouble if I suddenly get lots of new customers... hmm. Finally, I need to start cheap. I'm putting all I have into starting this company, and live on very little. So before I have any customers, 50 dollars a month is a fair bit and 100 dollars a month may be too much. If anyone has some tips to help get me started I'd be really grateful.

    Read the article

  • Use Port Binding Permissions on Windows

    - by Sharon
    This should be an easy one, but I can't find anything on it. I want to use IIS Express with my local user account to bind to a port on my netbios name. For example, http://computername:1315. My local user account doesn't have permission to do this, but I have administrator access on the machine. Anyone know how to grant permission to my local user account to bind to a port with my computer name instead of localhost? This is on Windows 7.

    Read the article

< Previous Page | 499 500 501 502 503 504 505 506 507 508 509 510  | Next Page >