Search Results

Search found 17097 results on 684 pages for 'entry level'.

Page 505/684 | < Previous Page | 501 502 503 504 505 506 507 508 509 510 511 512  | Next Page >

  • Programming Language, Turing Completeness and Turing Machine

    - by Amumu
    A programming language is said to be Turing Completeness if it can successfully simulate a universal TM. Let's take functional programming language for example. In functional programming, function has highest priority over anything. You can pass functions around like any primitives or objects. This is called first class function. In functional programming, your function does not produce side effect i.e. output strings onto screen, change the state of variables outside of its scope. Each function has a copy of its own objects if the objects are passed from the outside, and the copied objects are returned once the function finishes its job. Each function written purely in functional style is completely independent to anything outside of it. Thus, the complexity of the overall system is reduced. This is referred as referential transparency. In functional programming, each function can have its local variables kept its values even after the function exits. This is done by the garbage collector. The value can be reused the next time the function is called again. This is called memoization. A function usually should solve only one thing. It should model only one algorithm to answer a problem. Do you think that a function in a functional language with above properties simulate a Turing Machines? Functions (= algorithms = Turing Machines) are able to be passed around as input and returned as output. TM also accepts and simulate other TMs Memoization models the set of states of a Turing Machine. The memorized variables can be used to determine states of a TM (i.e. which lines to execute, what behavior should it take in a give state ...). Also, you can use memoization to simulate your internal tape storage. In language like C/C++, when a function exits, you lose all of its internal data (unless you store it elsewhere outside of its scope). The set of symbols are the set of all strings in a programming language, which is the higher level and human-readable version of machine code (opcode) Start state is the beginning of the function. However, with memoization, start state can be determined by memoization or if you want, switch/if-else statement in imperative programming language. But then, you can't Final accepting state when the function returns a value, or rejects if an exception happens. Thus, the function (= algorithm = TM) is decidable. Otherwise, it's undecidable. I'm not sure about this. What do you think? Is my thinking true on all of this? The reason I bring function in functional programming because I think it's closer to the idea of TM. What experience with other programming languages do you have which make you feel the idea of TM and the ideas of Computer Science in general? Can you specify how you think?

    Read the article

  • WiFi connected to router, but no internet connection

    - by Quetzacotl
    I just got a new notebook, a ThinkPad Edge E530, and installed Ubuntu on it. I'm pretty new to Ubuntu. On the same laptop, running Windows 7, the Wi-Fi connection works fine. Ethernet connection works both on Win7 and on Ubuntu. Only Wi-Fi on Ubuntu does not work; it connects to the Wi-Fi access point but I don't have Internet access. My wireless card is Intel Centrino Wireless-N 2230. What can fix the problem? EDIT: ifconfig -a eth0 Link encap:Ethernet HWaddr b8:88:e3:30:72:34 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:43 Base address:0x8000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:163 errors:0 dropped:0 overruns:0 frame:0 TX packets:163 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:10124 (10.1 KB) TX bytes:10124 (10.1 KB) usb0 Link encap:Ethernet HWaddr 02:15:e0:ec:01:00 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) wlan0 Link encap:Ethernet HWaddr 68:5d:43:43:71:e1 inet addr:192.168.2.101 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::6a5d:43ff:fe43:71e1/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:40 errors:0 dropped:0 overruns:0 frame:0 TX packets:220 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2801 (2.8 KB) TX bytes:26230 (26.2 KB) route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.2.1 0.0.0.0 UG 0 0 0 wlan0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 wlan0 192.168.2.0 0.0.0.0 255.255.255.0 U 2 0 0 wlan0 cat /etc/resolv.conf # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN nameserver 127.0.0.1 iwconfig lo no wireless extensions. usb0 no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"SATELITE" Mode:Managed Frequency:2.462 GHz Access Point: 00:1F:1F:8D:CC:08 Bit Rate=1 Mb/s Tx-Power=16 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=60/70 Signal level=-50 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:93 Invalid misc:243 Missed beacon:0 eth0 no wireless extensions.

    Read the article

  • Best Creational Pattern for loggers in a multi-threaded system?

    - by Dipan Mehta
    This is a follow up question on my past questions : Concurrency pattern of logger in multithreaded application As suggested by others, I am putting this question separately. As the learning from the last question. In a multi-threaded environment, the logger should be made thread safe and probably asynchronous (where in messages are queued while a background thread does writing releasing the requesting object thread). The logger could be signleton or it can be a per-group logger which is a generalization of the above. Now, the question that arise is how does logger should be assigned to the object? There are two options I can think of: 1. Object requesting for the logger: Should each of the object call some global API such as get_logger()? Such an API returns "the" singleton or the group logger. However, I feel this involves assumption about the Application environment to implement the logger -which I think is some kind of coupling. If the same object needs to be used by other application - this new application also need to implement such a method. 2. Assign logger through some known API The other alternative approach is to create a kind of virtual class which is implemented by application based on App's own structure and assign the object sometime in the constructor. This is more generalized method. Unfortunately, when there are so many objects - and rather a tree of objects passing on the logger objects to each level is quite messy. My question is there a better way to do this? If you need to pick any one of the above, which approach is would you pick and why? Other questions remain open about how to configure them: How do objects' names or ID are assigned so that will be used for printing on the log messages (as the module names) How do these objects find the appropriate properties (such as log levels, and other such parameters) In the first approach, the central API needs to deal with all this varieties. In the second approach - there needs to be additional work. Hence, I want to understand from the real experience of people, as to how to write logger effectively in such an environment.

    Read the article

  • Why CoffeeScript is tough to maintain

    - by Renso
    I recently started trying out CoffeeScript only to find out that it caused more headaches. The abstraction level of jQuery was perfect, it did not dictate to coders how to design their code, it just works. However, I recently posted a request to the CoffeeScript team to consider introducing curly braces to help with more complex code to control the flow of logic. For example a if-then-else with many nested levels can be near impossible to debug without tracing through it when using CoffeeScript. Also with IDEs like Visual Studio, regular JavaScript intellicense and auto-formatting make it easy to appropriate indent nested levels without any work on the part of the developer and reading it is not that hard, especially with some extensions that show vertical lines in the code editor to help see what is nested within what part of the code.However with CoffeeScript that is not the case. The samples given in the CoffeeScript web site are of course just simple examples to explain the features and one gets excited pretty quick over the powerful shortcuts. I tried to convert a piece of JavaScript over to CoffeeScript and gave up since you need to first of all remove ALL non CoffeeScript coding constructs for it to even compile. However js2coffee can help with that. However to keep track of nested levels became something that was simply not manageable using CoffeeScript.Furthermore, any coding language that controls the flow of logic by indentation is extremely dangerous for obvious reasons. I liked CoffeeScript a lot, but the fact that the logical flow of the code is controlled by how much you indent code, spaces or tabs, is not reliable as there is no way the programmer has an easy way of knowing what parts of the code will get hit when the code spans a page.When I suggested introducing curly braces in CoffeeScript the team, one contributor advised me that my code needs to be re-designed! Needless to say that is absurd. When I included a piece of the code he asked my if it was legacy code. It's like saying to a Java programmer, sorry you cannot use Java because we don't agree with how you write your code.jashkenas from the CoffeeScript blog gave some great suggestions and made the point that introducing curly braces would be very problematic for them as they use them to denote objects. Makes sense, but I would still love to see some way to replace code flow control with spaces and indentation to something more concrete and human readable.

    Read the article

  • Help with Collision of spawned object(postion fixed) with objects that there are translating on screen

    - by Amrutha
    Hey guys I am creating a game using Corona SDK and so coding it in Lua. So there are 2 separate functions, To translate the hit objects and change their color when they are tapped The link below is the code I am using to for the first function http://developer.anscamobile.com/sample-code/fishies Spawn objects that will hit the translating objects on collision. Alos on collision the spawned object disappears and the translating object bears a color(indicating the collision). In addition the size of this spawned object is dependent on i/p volume level. The function I have written is as follows, --VOICE INPUT CODE local r = media.newRecording() r:startRecording() r:startTuner() --local function newBar() -- local bar = display.newLine( 0, 0, 1, 0 ) -- bar:setColor( 0, 55, 100, 20 ) -- bar.width = 5 -- bar.y=400 -- bar.x=20 -- return bar --end local c1 = display.newImage("str-minion-small.png") c1.isVisible=false local c2 = display.newImage("str-minion-mid.png") c2.isVisible=false local c3 = display.newImage("str-minion-big.png") c3.isVisible=false --SPAWNING local function spawnDisk( event ) local phase = event.phase local volumeBar = display.newLine( 0, 0, 1, 0 ) volumeBar.y = 400 volumeBar.x = 20 -- volumeBar.isVisible=false local v = 20*math.log(r:getTunerVolume()) local MINTHRESH = 30 local LEFTMARGIN = 20 local v2 = MINTHRESH + math.max (v, -MINTHRESH) v2 = (display.contentWidth - 1 * LEFTMARGIN ) * v2 / MINTHRESH volumeBar.xScale = math.max ( 20, v2 ) local l = volumeBar.xScale local cnt1 = 0 local cnt2 = 0 local cnt3 = 0 local ONE =1 local val = event.numTaps --local px=event.x --local py=event.y if "ended" == phase then --audio.play( popSound ) --myLabel.isVisible = false if l > 50 and l <=150 then -- c1:setFillColor(10,105,0) -- c1.isVisible=false c1.x=math.random( 10, 450 ) c1.y=math.random( 10, 300 ) physics.addBody( c1, { density=1, radius=10.0 } ) c1.isVisible=true cnt1= cnt1+ ONE return c1 elseif l > 100 and l <=250 then --c2:setFillColor(200,10,0) c2.x=math.random( 10, 450 ) c2.y=math.random( 10, 300 ) physics.addBody( c2, { density=2, radius=9000.0 } ) c2.isVisible=true cnt2= cnt2+ ONE return c2 elseif l >=250 then c3.x=math.random( 40, 450 ) c3.y=math.random( 40, 300 ) physics.addBody( c3, { density=2, radius=7000.0 , bounce=0.0 } ) c3.isVisible=true cnt3= cnt3+ ONE return c3 end end end buzzR:addEventListener( "touch", spawnDisk ) -- touch the screen to create disks Now both functions work fine independently but there is no collision happening. Its almost as if the translating object and the spawn object are on different layers. The translating object passes through the spawn object freely. Can anyone please tell me how to resolve this problem. And how can I get them to collide. Its my first attempt at game development, that too for a mobile platform so would appreciate all help. Also if I have not been specific do let me know. I ll try to frame the query better :). Thanks in advance.

    Read the article

  • How to wrap console utils in webserver

    - by Alex Brown
    I have a big dataset (100Mbs/day) and a bunch of console a TCL/TK tools to view it - I want to turn it into a web app that I can build, and others can maintain. In long: my group runs simulations yielding 100s of Mbs of data daily, in multiple (mostly but not only) text forms. We have a bunch of scripts and tools, mostly old school 1990's style stuff requiring a 5-button mouse, as well as lots of ad-hoc scripts that engineers build out of frustration every month or so. These produces UIs, graphs, spreadsheets (various sizes), logs, event histories etc. I want to replace (or at least supplement) the xwindows / console style UI with a web-based one, so I need the following properties: pleasant to program can wrap existing command-line tools in separate views (I don't need to scrape GUIs or anything) as I port logic from the existing scripts I can create a modularised and pleasant codebase to replace it I can attach a web-ui to navigate between views - each view is likely to contain keys which might make sense to view in another I am new to building systems that have logic on the back-end and front-end of a web-server. from that point of view, they do this: backend wraps old-school executables, constructs calls into them and them takes the output and wraps it up, niceifies it and delivers it to the web client. For instance the tool might generate a number of indexed images (per invocation) which I might deliver all at once or on-demand. May (probably) need to to heavy stats on some sources. frontend provides navigation connecting multiple views, performs requests from one view for data from another (or self to self), etc. Probably will have some views with a lot of interactivity. Can people please point me towards viable solutions for this? I know it's a bit of an open question so as answers come in I hope to refine the spec until we have a good match. I guess I expect to see answers like "RoR!" "beans!" "Scala!" but please give an indication of why those are a good fit; I know nothing! I got bumped off SO for asking an open-ended question, so sorry if its OT here too (let me know). I take the policy that I use the best/closest matched language for a project but most of my team are extremely low level (ie pipeline stages and CDyn) so I don't have the peer group to know where to start.

    Read the article

  • Don't Forget To Enjoy Life

    - by Justin
    I have a pretty clear stance on posting personal information in my blogs. I tend to avoid it almost instinctively. Part of that is because I am a somewhat private person. And the other is because I know how easy it is for personal information to be gathered and collected from sources such as blogs. So, this has remained a tech only blog for me. I've only posted topics mostly related to issues I have encountered at work. In a way this blog is a 'bookmark' for me. If I post something here and run into the issue again it allows me to refer back to a convenient place where the 'fix' is documented in a way that I understand. But today, I am posting something that speaks to everyone. Something PERSONAL. Honestly, I expect this entry to receive zero views. But if nothing else, I can come back to this blog one day when I'm having a bad day or something and run across this post. And I will be reminded... DON'T FORGET TO ENJOY LIFE. Say this to yourself out loud, right now. People, we can get caught up in some rather mundane details as we trek through life. It's so easy to lose track of what really matters that it should be no surprise to find yourself reading something like this and thinking to yourself 'Yeah. You are right, man. Some of this crap I'm clinging on to right now is so small in the grand scheme of things'. I have no reservation, no shame, in saying that I am more often than not caught up in the ever evolving world of 'shit that does not matter'. When you work in technology, you are surrounded by deadlines, upgrades, new versions, support 'end of life', etc. And by time you get done with your 8 hours you go home and put in a few more because you are STILL CAUGHT UP in the things you dealt with at work all day. DO YOURSELF A FAVOR. DO YOUR FAMILY AND FRIEND A FAVOR. When you are done for the day, and you drive home, get those work-related things out of your head before you pull into the driveway. If you are still thinking on them when you park the car, leave the engine running, close your eyes and take a deep breath. If you believe in God, pray. If you don't then meditate for a second with the INTENTION of letting go of the day and becoming the 'real you'. You may have forgotten who the real you is so I'll remind you.... THE REAL YOU IS THAT GUY OR GAL THAT LAUGHS, LOVES, AND LIVES. Be the real you as often as possible. If you can't do it during your 9 - 5, do it at home. YOUR RELATIONSHIPS AND YOUR PERSONAL HAPPINESS DEPEND ON IT. I am going to make you a promise right now. If you do what I've just said, your days will be longer and your joy will be exponential. I can't explain why I know this to be true. But I do know it. And if you are there reading this right now, you know it is true too. We both know it is true because it COMES FROM WITHIN EVERY MAN, WOMAN and CHILD. We are born into love and happiness. Lets not fade away into the darkness so easily found in this world. Lets keep the flame burning. The flame of passion. Passion for LIFE. Peace be with you.

    Read the article

  • Cheating on Technical Debt

    - by Tony Davis
    One bad practice guaranteed to cause dismay amongst your colleagues is passing on technical debt without full disclosure. There could only be two reasons for this. Either the developer or DBA didn’t know the difference between good and bad practices, or concealed the debt. Neither reflects well on their professional competence. Technical debt, or code debt, is a convenient term to cover all the compromises between the ideal solution and the actual solution, reflecting the reality of the pressures of commercial coding. The one time you’re guaranteed to hear one developer, or DBA, pass judgment on another is when he or she inherits their project, and is surprised by the amount of technical debt left lying around in the form of inelegant architecture, incomplete tests, confusing interface design, no documentation, and so on. It is often expedient for a Project Manager to ignore the build-up of technical debt, the cut corners, not-quite-finished features and rushed designs that mean progress is satisfyingly rapid in the short term. It’s far less satisfying for the poor person who inherits the code. Nothing sends a colder chill down the spine than the dawning realization that you’ve inherited a system crippled with performance and functional issues that will take months of pain to fix before you can even begin to make progress on any of the planned new features. It’s often hard to justify this ‘debt paying’ time to the project owners and managers. It just looks as if you are making no progress, in marked contrast to your predecessor. There can be many good reasons for allowing technical debt to build up, at least in the short term. Often, rapid prototyping is essential, there is a temporary shortfall in test resources, or the domain knowledge is incomplete. It may be necessary to hit a specific deadline with a prototype, or proof-of-concept, to explore a possible market opportunity, with planned iterations and refactoring to follow later. However, it is a crime for a developer to build up technical debt without making this clear to the project participants. He or she needs to record it explicitly. A design compromise made in to order to hit a deadline, be it an outright hack, or a decision made without time for rigorous investigation and testing, needs to be documented with the same rigor that one tracks a bug. What’s the best way to do this? Ideally, we’d have some kind of objective assessment of the level of technical debt in a software project, although that smacks of Science Fiction even as I write it. I’d be interested of hear of any methods you’ve used, but I’m sure most teams have to rely simply on the integrity of their colleagues and the clear perceptions of the project manager… Cheers, Tony.

    Read the article

  • iTorque for a simple arcade game

    - by Herfus
    I have a basic understanding of programming, but I am no programmer. I've had a couple of a semesters with java programming, so we're talking pretty basic here. I have some scripting experience with game editors where I've created a few (simple) encounters, boss AI, abilities, events and so on. I've mostly done level design with UDK, Source and several other toolsets for a few years now, but I'd like to divert some of the focus to iphone-development. I've participated in a few development projects (source, udk, daot) where I've had a variety of roles (yet never beyond simple scripting). I have just finished prototyping an Iphone game (using game maker) and begun a bit more precise planning on what I'll have to do for the real version. The game is fairly simple, perhaps the best comparison in scope and complexity would be Doodlejump for iPhone. The reason I created the prototype was not just to answer a few questions about the gameplay, but to get some insight into what kind of problems I might face when trying to develop the real thing. I've been looking for engines that I can use for this. iTorque looks, so far, like the best option with a scripting language and WYSIWYG-editor. However the price is fairly steep and I'd like to prepare myself as much as possible before jumping into this, which is why I'm going to ask a few questions here. What kind of difficulties do you think I might run into, considering what you've read so far? Not just with torque, but development in general. I'm making this question mostly to have someone to reality check me. I usually achieve to do what I'm trying to do with scripting, but something tells me there's a very big difference between scripting an AI or an event and creating game logic. Will it be too much of a leap? Just how simple is it to use the Torque scripting language? Obviously I don't expect to be prepared, I expect it to be a learning process. However, I'd still like to be at least a bit confident on the time I'll have to dedicate to this first.

    Read the article

  • 3D terrain map with Hexagon Grids (XNA)

    - by Rob
    I'm working on a hobby project (I'm a web/backend developer by day) and I want to create a 3D Tile (terrain) engine. I'm using XNA, but I can use MonoGame, OpenGL, or straight DirectX, so the answer does not have to be XNA specific. I'm more looking for some high level advice on how to approach this problem. I know about creating height maps and such, there are thousands of references out there on the net for that, this is a bit more specific. I'm more concerned with is the approach to get a 3D hexagon tile grid out of my terrain (since the terrain, and all 3d objects, are basically triangles). The first approach I thought about is to basically draw the triangles on the screen in the following order (blue numbers) to give me the triangles for terrain (black triangles) and then make hexes out of the triangles (red hex). http://screencast.com/t/ebrH2g5V This approach seems complicated to me since i'm basically having to draw 4 different types of triangles. The next approach I thought of was to use the existing triangles like I did for a square grid and get my hexes from 6 triangles as follows http://screencast.com/t/w9b7qKzVJtb8 This seems like the easier approach to me since there are only 2 types of triangles (i would have to play with the heights and widths to get a "perfect" hexagon, but the idea is the same. So I'm looking for: 1) Any suggestions on which approach I should take, and why. 2) How would I translate mouse position to a hexagon grid position (especially when moving the camera around), for example in the second image if the mouse pointer were the green circle, how would I determine to highlight that hexagon and then translating that into grid coordinates (assuming it is 0,0)? 3) Any references, articles, books, etc - to get me going in the right direction. Note: I've done hex grid's and mouse-grid coordinate conversion before in 2d. looking for some pointers on how to do the same in 3d. The result I would like to achieve is something similar to the following: http :// www. youtube .com / watch?v=Ri92YkyC3fw (sorry about the youtube link, but it will only let me post 2 links in this post... same rep problem i mention below...) Thanks for any help! P.S. Sorry for not posting the images inline, I apparently don't have enough rep on this stack exchange site.

    Read the article

  • links for 2011-01-12

    - by Bob Rhubart
    WebCenter Spaces 11g PS2 Template Customization (Javier Ductor's Blog) "Recently, we have been involved in a WebCenter Spaces customization project. A customer sent us a prototype website in HTML, and we had to transform Spaces to set the same look and feel as in the prototype..." Javier Ductor (tags: oracle otn webcenter enteprise2.0) Matt Carter: Risky Business "Incorporating risk detection and mitigation capabilities into apps is becoming all the rage. There are plenty of real-life examples of cases where prevention of cyber-security threats and fraudsters might have kept governments and companies out of the news, and with more money in their accounts." (tags: oracle otn security middleware) John Brunswick: 5 Surprisingly Good Benefits of Corporate Blogs "Some may still propose that not all corporations are going to be able to provide the five benefits above and are more focused around shameless self promotion of products and services.  If that is the case, that corporation is most likely not producing something of high value." - John Brunswick (tags: oracle otn enterprise2.0 blogging) InfoQ: IT And Architecture: Inside-Out Perspectives The software industry is in disarray, costs are escalating, and quality is diminishing. Promises of newer technologies and processes and methodologies in IT are still far from materializing on any significant scale. Bruce Laidlaw and Michael Poulin - each with more than 30 years of experience compared notes on the past and present of IT and provide insights on what IT needs to make progress. (tags: ping.fm) SOA & Middleware: Canceling a running composite instance - example Useful tips from Niall Commiskey. (tags: soa middleware oracle) BPEL 11.1.1.2 Certified for Prebuilt E-Business Suite 12.1.3 SOA Integrations (Oracle E-Business Suite Technology) "A new certification was released simultaneously with the E-Business Suite 12.1.3 Maintenance Pack late last year: the use of BPEL 11g Version 11.1.1.2 with E-Business Suite 12.1.3." -- Steven Chan (tags: oracle bpel) Marc Kelderman: OSB: Deploy Service Level Agreement (SLA), aka Alert Rule "The big issue with these SLAs is the deployment. If you have dozens of services, with multiple operations, and you have a lot of environments it takes a while to create them...[But] I have a nice workaround." - Mark Kelderman  (tags: oracle otn soa osb sla) @myfear: Java EE 7 - what's coming up for 2012? First hints. "Even if the actual Java EE 6 version is still not too widespread, we already have seen the first signs of the next EE 7 version written to the sky." -- Markus "myfear" Eisele (tags: oracle otn oracleace java)

    Read the article

  • Cloud service and IM protocol advice, for a backend to group chat mobile app

    - by Jonathan
    Overview I’m going to develop an app on Android and iOS. It will allow users to set up group ‘chat rooms’ and talk on chat rooms set up by other users. The service needs to be highly scalable, such that it could accommodate a massive increase in users overnight (we can only dream). Chat requirements The chat protocol used should be flexible: it should allow me to determine who can view/post on ‘chat rooms’ based on certain other factors, as determined by the first poster/creator of the particular ‘chat room’. It should also allow for users to simply install the app and begin using the service, after only providing a simple nickname (which could be changed later). Chat protocol plans Having looked around I think the XMPP protocol is the best candidate. In particular the Multi-user chat extension looks like what I’ll need. Would this be most suited to my requirements, or do you know another potential solution? Cloud service I have been deciding between Amazon Web Services, Google App Engine and Windows Azure. I’m coming to the conclusion that Azure will be best, as it is easier to manage than AWS (ease of scalability will be a key factor in the design), I think it may be less restricted than GAE, plus Azure will soon have toolkits to allow easy interfacing with both Android and iOS phones. Is this the decision you would have made, or would you recommend/look into other cloud services? General project philosophy I have only recently started looking into this project’s feasibility, and am no expert on any of its aspects. So wherever possible I will leave the actual implementations to experts, i.e. choosing a higher-level cloud service, using a well-documented plugin of a, proven reliable, group chat protocol etc. My background I have some programming knowledge from a computer science degree. Main languages I’ve used have been Java and Python, but I don’t want this to affect design decisions for the project. The most appropriate languages for the task should be used, i.e. I don’t mind learning a lot of new skills (my current programming levels are relatively basic anyway). Thank you Thanks for reading, and any advice you have about any aspect would be greatly appreciated :-)

    Read the article

  • Phone number in meta description bad or good for local rankings NAP

    - by bybe
    Once again I'm at it with increasing people's local rankings and I've learnt so much about local rankings in the past 2 weeks it feels like my brain is gonna pop anyway, question is fairly simple for someone who engages in local rankings and I appreciate the question may be a little guess work but isn't SEO mostly guessing anyway? From what I've read and learned that Google works of a system called nap for local rankings (With many other factors but this question is purely based on NAP). For people who care about local rankings NAP stands for Name of Business / Address of Business / Phone Number for Business. Now what what I've read you don't need the whole NAP to be on one website, a P or just a N can help towards your local rankings. It's believed that NAP rewards more than just P and N for example but knowing Google they might have a diversity checker which is my concern what your get to in a moment. Now of course sites weight differently where your business is posted, it's certainly going to be more credible if your NAP details are on your national phone book than say a blog site, so taking in this consideration too. Pure Guess (Not apart of the question but none the less makes a good read on my belief). Now my guess work would make me believe that the formula would look something like (N)+(A)+(P)x(T) So (N)name would be 1 or 0 to indicate present or not So (A)dress would be 1 or 0 to indicate present or not So (P)hone would be 1 or 0 to indicate present or not So (T)rust would be 1-100 to indicate level of trust So a phone number appearing on youtube might look something like 0+0+1x95= 95 and a NAP appearing on your national phone book might look something like 1+1+1x100= 300 Please note that I'm not saying this is the sole factor and I'm sure its way more complex that this with things like other factors on the page, off the page (Reviews, Links, Clicks) and so on but its still a contributor). The Question My question is fairly simple and I'd imagine hard to impossible to have an actual definite answer to this but maybe someone has seen official wording else where on this, is it bad to include address or phone number in the Meta Description? The reason I ask is that one of my competitors has these elements in the meta descriptions and their local rankings are absolutely superb, the problem I have with this is scrap bot sites like 'Similar Too' 'Seo Rankings' and 1,000's of the other scrap box networks that scrap site and then make urls with your site information are mostly limited to your meta description what this means that your phone number, address and sometimes even your company name if the domain is exact will appear as AP, and even NAP on thousands of websites. So, is it a bad strategy to include phone number and address in meta description, everything I read into would suggest its good of course with the downside of maybe lowering quality of description for click thoughts but top rankings would increase this 10 folds anyhow..

    Read the article

  • How to get wireless (Alfa) operate in full power and speed up wireless Internet?

    - by MahboobeAlam
    I am using Wireless to connect to the internet (router). My laptop has Atheros wireless (AR 242x/542x) adapter but the router is a little bit far-away from my room so I have to use an external wireless adapter i.e. Alfa (Realtek 8187) for connectivity. However, since I have started using Ubuntu I noticed that Alfa is not working in full power, internet speed in Ubuntu is much slower than in Windows on my laptop. When I am using Windows 7 the LED (bulb) on Alfa blinks as it should, but when in Ubuntu, it doesn't blink rather it is on but very dim. Connection using Atheros adapter is also the same (slow)... I have tried 4 methods (I found on the Internet) to troubleshoot this matter but no success. It seems to me that Ubuntu/Linux is not letting these wireless adapters to operate in full strength. iwconfig shows that power management is off for both. So what's the problem? Details: ifconfig eth0 Link encap:Ethernet HWaddr 00:1f:16:1e:36:ec UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:45 Base address:0x6000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1657 errors:0 dropped:0 overruns:0 frame:0 TX packets:1657 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:241697 (241.6 KB) TX bytes:241697 (241.6 KB) wlan0 Link encap:Ethernet HWaddr 00:22:5f:9b:24:b5 inet6 addr: fe80::222:5fff:fe9b:24b5/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:715460 errors:0 dropped:0 overruns:0 frame:0 TX packets:694246 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:493539292 (493.5 MB) TX bytes:235159393 (235.1 MB) wlan1 Link encap:Ethernet HWaddr 00:c0:ca:42:14:62 inet addr:192.168.100.102 Bcast:192.168.100.255 Mask:255.255.255.0 inet6 addr: fe80::2c0:caff:fe42:1462/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:171053 errors:0 dropped:0 overruns:0 frame:0 TX packets:181363 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:74094659 (74.0 MB) TX bytes:59474204 (59.4 MB) iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off wlan1 IEEE 802.11bg ESSID:"Zia" Mode:Managed Frequency:2.412 GHz Access Point: 00:0D:F0:9C:A6:18 Bit Rate=54 Mb/s Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=70/70 Signal level=-31 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:204 Invalid misc:6610 Missed beacon:0

    Read the article

  • External hard drive not recognized

    - by sr71
    Installed Ubuntu 10.10 on a hard drive by itself (no windows). All updates are up to date. Everything`works fine except when I plug in a 320 gig Toshiba external hard drive....it is not recognized. When I plug in an 8 gig flash drive it is recognized no problem. What do I mean by "not recognized"? I mean: how do you know it was not recognized. You can check the command "cat /proc/partitions" in a terminal with and without the hdd attached. If you see some difference, it's ok. If the difference is something like "sda1" (sd+letter+number) then you have partition on it, maybe it can't be handled in Ubuntu (no filesystem on it or so). If there is only "sda" in the difference for example (sd+letter, but no number after it) then the drive itself is detected, just no partition is created on it. Also you can check out the messages of the kernel, with the "dmesg" command in the terminal. If there is no disk/partition/anything in /proc/partitions, there can be an USB level problem, you can issue command "lsusb" as it was suggested before my answer. It's really matter of what do you mean about "not recognized". @Marco Ceppi @Oli @Pitto By "not recognized" I meant that when I plug in a 8 gig flash drive an icon immediately appears on the desktop imdicating that there is a flash drive plugged in and I can click on it and view the files on the flash drive. It also shows up on the "Nautilus" default file manager. When I plug in the 320 gig Toshiba external hard drive, I get no indication on the desktop or the file manager (thus "not recogized"). When I run the command cat/proc/partitions/ I get an error message Could not open location 'file:///home/bob/cat/proc/partitions' with or without the external hard drive installed. With the dmeg command I get about 10 pages of info with no mention of disk/partition/anything in /proc/partitions. When I run lsusb command I get the following: bob@bob-desktop:~$ lsusb Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 003: ID 04b3:3003 IBM Corp. Rapid Access III Keyboard Bus 003 Device 002: ID 04b3:3004 IBM Corp. Media Access Pro Keyboard Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

    Read the article

  • MS in Computer Science after BE in electronics

    - by Abhinav
    I am doing my 3rd year Bachelors in Electronics and Electrical Communication but from the first year I have been interested in Computer Science. But at that time it was just my hobby. But in second year when I joined robotics my love for computer science rose. I with my team came in top three in 2 National Competition (Technical fests of different IITs) where we used Image Processing, Hardware interfacing etc. But then I realised that Computer Science is not just about coding. I took many lectures from online free schools like Udacity, Coursera in subjects related to Artificial Intelligence, Building a Search Engine, Design and Analysis of Algorithm, Programming a Robotic Car, Programming Languages, Machine Learning, Software Engineering as a Service, WebApps Engineering, Compilers, Applied Crypotography etc. I also did some courses in Core and Advanced Java in my second year from training institute. I will also be taking course in Statistics, Databases, Discrete Mathematics from 25th June. Now I realized how vast is the field of Computer Science and how efficient you become on deciding algorithms and classifying problems into different subfields which have been thoroughly researched so you don't always do brute force thing or naive programming. Now this field has become kind of passion for me. Adding to the fact I am also doing my 6 months internship in software field in Texas Instruments where I am working on Automation and Algorithms. I also have some 5-6 good college level projects in Softwares and Robotics. I also like Electronics but only some fields like Operating System(this subject was there in Electronics also), Micro Processor, Digital, Computer Architecture, DSPs etc. I really want to pursue MS in some field of Computer Science. I am giving GRE in October/November. Till now I have good CG of around 9.4/10 and my 1 year in college is still left. Do I have any chance that some good University in US will consider me for MS in field related to computer science or Robotics. Also Can you suggest somethings that I can do during this 1 year to increase my chances for MS or should I apply for EECS(Electrical Engineering and Computer Science) and then I can shift more towards Computer Science as my major option. My main aim is to do Phd after Ms in CS if I am able to do that somehow. I know that I have to put much extra effort to understand things in MS than CS undergraduates but I will do that with my full dedication, also when I communicate with my college CS students or during my internship period I didn't feel that I am missing very much stuff that they know and was very comfortable during my internship with software employees.

    Read the article

  • SQL SERVER – Curious Case of Disappearing Rows – ON UPDATE CASCADE and ON DELETE CASCADE – T-SQL Example – Part 2 of 2

    - by pinaldave
    Yesterday I wrote a real world story of how a friend who thought they have an issue with intrusion or virus whereas the issue was really in the code. I strongly suggest you read my earlier blog post Curious Case of Disappearing Rows – ON UPDATE CASCADE and ON DELETE CASCADE – Part 1 of 2 before continuing this blog post as this is second part of the first blog post. Let me reproduce the simple scenario in T-SQL. Building Sample Data USE [TestDB] GO -- Creating Table Products CREATE TABLE [dbo].[Products]( [ProductID] [int] NOT NULL, [ProductDesc] [varchar](50) NOT NULL, CONSTRAINT [PK_Products] PRIMARY KEY CLUSTERED ( [ProductID] ASC )) ON [PRIMARY] GO -- Creating Table ProductDetails CREATE TABLE [dbo].[ProductDetails]( [ProductDetailID] [int] NOT NULL, [ProductID] [int] NOT NULL, [Total] [int] NOT NULL, CONSTRAINT [PK_ProductDetails] PRIMARY KEY CLUSTERED ( [ProductDetailID] ASC )) ON [PRIMARY] GO ALTER TABLE [dbo].[ProductDetails] WITH CHECK ADD CONSTRAINT [FK_ProductDetails_Products] FOREIGN KEY([ProductID]) REFERENCES [dbo].[Products] ([ProductID]) ON UPDATE CASCADE ON DELETE CASCADE GO -- Insert Data into Table USE TestDB GO INSERT INTO Products (ProductID, ProductDesc) SELECT 1, 'Bike' UNION ALL SELECT 2, 'Car' UNION ALL SELECT 3, 'Books' GO INSERT INTO ProductDetails ([ProductDetailID],[ProductID],[Total]) SELECT 1, 1, 200 UNION ALL SELECT 2, 1, 100 UNION ALL SELECT 3, 1, 111 UNION ALL SELECT 4, 2, 200 UNION ALL SELECT 5, 3, 100 UNION ALL SELECT 6, 3, 100 UNION ALL SELECT 7, 3, 200 GO Select Data from Tables -- Selecting Data SELECT * FROM Products SELECT * FROM ProductDetails GO Delete Data from Products Table -- Deleting Data DELETE FROM Products WHERE ProductID = 1 GO Select Data from Tables Again -- Selecting Data SELECT * FROM Products SELECT * FROM ProductDetails GO Clean up Data -- Clean up DROP TABLE ProductDetails DROP TABLE Products GO My friend was confused as there was no delete was firing over ProductsDetails Table still there was a delete happening. The reason was because there is a foreign key created between Products and ProductsDetails Table with the keywords ON DELETE CASCADE. Due to ON DELETE CASCADE whenever is specified when the data from Table A is deleted and if it is referenced in another table using foreign key it will be deleted as well. Workaround 1: Design Changes – 3 Tables Change the design to have more than two tables. Create One Product Mater Table with all the products. It should historically store all the products list in it. No products should be ever removed from it. Add another table called Current Product and it should contain only the table which should be visible in the product catalogue. Another table should be called as ProductHistory table. There should be no use of CASCADE keyword among them. Workaround 2: Design Changes - Column IsVisible You can keep the same two tables. 1) Products and 2) ProductsDetails. Add a column with BIT datatype to it and name it as a IsVisible. Now change your application code to display the catalogue based on this column. There should be no need to delete anything. Workaround 3: Bad Advices (Bad advises begins here) The reason I have said bad advices because these are going to be bad advices for sure. You should make necessary design changes and not use poor workarounds which can damage the system and database integrity further. Here are the examples 1) Do not delete the data – well, this is not a real solution but can give time to implement design changes. 2) Do not have ON CASCADE DELETE – in this case, you will have entry in productsdetails which will have no corresponding product id and later on there will be lots of confusion. 3) Duplicate Data – you can have all the data of the product table move to the product details table and repeat them at each row. Now remove CASCADE code. This will let you delete the product table rows without any issue. There are so many things wrong this suggestion, that I will not even start here. (Bad advises ends here)  Well, did I miss anything? Please help me with your suggestions. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • Lead, Follow, or Get out of the way

    - by Daniel Moth
    This is one of the sayings (attributed to Thomas Paine) that totally resonated with me from the first time I heard it, which was only 3 years ago during some training course at work: "Lead, Follow, or Get out of the way" You'll find many books with this title and you'll find it quoted by politicians and other leaders in various countries at various times... the quote is open to interpretation and works on many levels. To set the tone of what this means to me, I'll use a simple micro example: In any given conversation, you are either leading it or following it, at different times/snapshots of the conversation. If you are not willing or able to lead it, and you are not willing or able to follow it, then you should depart. The bad alternative which this guidance encourages you NOT to do is to stick around and obstruct progress by not following, not leading, and simply complaining or trying to derail the discussion in no particular direction. The same pattern applies at your position/role at work. Either follow your management/leadership team, or try to lead them to what you think is a better place, or change jobs. Don't stick around complaining about the direction things are going, while not actively trying to either change things or make peace with it. In the previous paragraph you can replace the word "your management" with "the people reporting to you" and the guidance still holds. Either lead your direct reports to where you think they should go, or follow their lead, or change jobs. Complaining about folks not taking direction while doing nothing is not a maintainable state. To me this quote is not about a permanent state, it is not about some people always leading and some always following: It is about a role/hat that anybody can play/wear at any given moment. One minute I am leading you, the next I am following you, and the next we are both following someone else and so on... When there is disagreement, debate the different directions for as long as it takes for you to be comfortable that you can either follow or lead. If you don't become comfortable with either of those, get out of the way. Something to remember is that it is impossible to learn how to lead well, without learning how to follow well (probably deserves its own blog entry)... Things go wrong when someone thinks that they must always be leading, or when everybody wants to follow and nobody steps up to lead... Things go wrong when more than one person wants to lead and they don't try to reach agreement on a shared direction, stubbornly sticking to their guns pulling the rest of the team in multiple directions... Things go wrong when more than one person wants to lead and after numerous and lengthy discussions, none of them decides to follow or get out of the way... Things go wrong when people don't want to lead, don't want to follow, and insist on sticking around... While there are a few ways things that can go wrong as enumerated in the previous paragraph, the most common one in my experience is the last one I mentioned. You'll recognize these folks as the ones that always complain about everything that is wrong with their company/product but do nothing about it. Every time you hear someone giving feedback on how something is wrong or suboptimal, ask them "So now that you identified the problem, what do you think the solution is and what are you doing to drive us to that solution?" The next time things start going wrong, step up and remind everyone: Lead, Follow, or Get out of the way. For more perspectives, and for input to help you form your own interpretation, search the web for this phrase to see in what contexts it is being used (bing, google). Finally, regardless of your political views, I hope you can appreciate if only as an example this perspective of someone leading by actually getting out of the way. Comments about this post by Daniel Moth welcome at the original blog.

    Read the article

  • best way to "introduce" OOP/OOD to team of experienced C++ engineers

    - by DXM
    I am looking for an efficient way, that also doesn't come off as an insult, to introduce OOP concepts to existing team members? My teammates are not new to OO languages. We've been doing C++/C# for a long time so technology itself is familiar. However, I look around and without major infusion of effort (mostly in the form of code reviews), it seems what we are producing is C code that happens to be inside classes. There's almost no use of single responsibility principle, abstractions or attempts to minimize coupling, just to name a few. I've seen classes that don't have a constructor but get memset to 0 every time they are instantiated. But every time I bring up OOP, everyone always nods and makes it seem like they know exactly what I'm talking about. Knowing the concepts is good, but we (some more than others) seem to have very hard time applying them when it comes to delivering actual work. Code reviews have been very helpful but the problem with code reviews is that they only occur after the fact so to some it seems we end up rewriting (it's mostly refactoring, but still takes lots of time) code that was just written. Also code reviews only give feedback to an individual engineer, not the entire team. I am toying with the idea of doing a presentation (or a series) and try to bring up OOP again along with some examples of existing code that could've been written better and could be refactored. I could use some really old projects that no one owns anymore so at least that part shouldn't be a sensitive issue. However, will this work? As I said most people have done C++ for a long time so my guess is that a) they'll sit there thinking why I'm telling them stuff they already know or b) they might actually take it as an insult because I'm telling them they don't know how to do the job they've been doing for years if not decades. Is there another approach which would reach broader audience than a code review would, but at the same time wouldn't feel like a punishment lecture? I'm not a fresh kid out of college who has utopian ideals of perfectly designed code and I don't expect that from anyone. The reason I'm writing this is because I just did a review of a person who actually had decent high-level design on paper. However if you picture classes: A - B - C - D, in the code B, C and D all implement almost the same public interface and B/C have one liner functions so that top-most class A is doing absolutely all the work (down to memory management, string parsing, setup negotiations...) primarily in 4 mongo methods and, for all intents and purposes, calls almost directly into D. Update: I'm a tech lead(6 months in this role) and do have full support of the group manager. We are working on a very mature product and maintenance costs are definitely letting themselves be known.

    Read the article

  • My Automated NuGet Workflow

    - by Wes McClure
    When we develop libraries (whether internal or public), it helps to have a rapid ability to make changes and test them in a consuming application. Building Setup the library with automatic versioning and a nuspec Setup library assembly version to auto increment build and revision AssemblyInfo –> [assembly: AssemblyVersion("1.0.*")] This autoincrements build and revision based on time of build Major & Minor Major should be changed when you have breaking changes Minor should be changed once you have a solid new release During development I don’t increment these Create a nuspec, version this with the code nuspec - set version to <version>$version$</version> This uses the assembly’s version, which is auto-incrementing Make changes to code Run automated build (ruby/rake) run “rake nuget” nuget task builds nuget package and copies it to a local nuget feed I use an environment variable to point at this so I can change it on a machine level! The nuget command below assumes a nuspec is checked in called Library.nuspec next to the csproj file $projectSolution = 'src\\Library.sln' $nugetFeedPath = ENV["NuGetDevFeed"] msbuild :build => [:clean] do |msb| msb.properties :configuration => :Release msb.targets :Build msb.solution = $projectSolution end task :nuget => [:build] do sh "nuget pack src\\Library\\Library.csproj /OutputDirectory " + $nugetFeedPath end Setup the local nuget feed as a nuget package source (this is only required once per machine) Go to the consuming project Update the package Update-Package Library or Install-Package TLDR change library code run “rake nuget” run “Update-Package library” in the consuming application build/test! If you manually execute any of this process, especially copying files, you will find it a burden to develop the library and will find yourself dreading it, and even worse, making changes downstream instead of updating the shared library for everyone’s sake. Publishing Once you have a set of changes that you want to release, consider versioning and possibly increment the minor version if needed. Pick the package out of your local feed, and copy it to a public / shared feed! I have a script to do this where I can drop the package on a batch file Replace apikey with your nuget feed's apikey Take out the confirm(s) if you don't want them @ECHO off echo Upload %1? set /P anykey="Hit enter to continue " nuget push %1 apikey set /P anykey="Done " Note: helps to prune all the unnecessary versions during testing from your local feed once you are done and ready to publish TLDR consider version number run command to copy to public feed

    Read the article

  • Is there a pedagogical game engine?

    - by K.G.
    I'm looking for a book, website, or other resource that gives modern 3D game engines the same treatment as Operating Systems: Design and Implementation gave operating systems. I have read Jason Gregory's Game Engine Architecture, which I enjoyed. However, by intent the author treated components of the architecture as atomic units, whereas what I'm interested in is the plumbing between those units that makes a coherent whole out of ideally loosely coupled parts. In books such as these, one usually reads that "that's academic," but that's the point! I have also read Julian Gold's Object-oriented Game Development, which likewise was good, but I feel is beginning to show its age. Since even mobile platforms these days are multicore and have fast video memory, those kinds of things (concurrency, display item buffering) would ideally be covered. There are other resources, such as the Doom 3 source code, which is highly instructive for its being a shipped product. The problem with those is as follows: float Q_rsqrt( float number ) { long i; float x2, y; const float threehalfs = 1.5F; x2 = number * 0.5F; y = number; i = * ( long * ) &y; // evil floating point bit level hacking i = 0x5f3759df - ( i >> 1 ); // what the f***? y = * ( float * ) &i; y = y * ( threehalfs - ( x2 * y * y ) ); // 1st iteration // y = y * ( threehalfs - ( x2 * y * y ) ); // 2nd iteration, this can be removed return y; } To wit, while brilliant, this kind of source requires more enlightenment than I can usually muster upon first read. In summary, here's my white whale: For an adult reader with experience in programming. I wish I could save all the trees killed by every. Single. Game Programming book ever devoting the first two chapters to "Now just what is a variable anyway?" In C or C++, very preferably C++. Languages that are more concise are fantastic for teaching, except for when what you want to learn is how to cope with a verbose language. There is also the benefit of the guardrails that C++ doesn't provide, such as garbage collection. Platform agnostic. I'm sincerely afraid that this book is out there and it's Visual C++/DirectX oriented. I'm a Linux guy, and I'd do what it takes, but I would very much like to be able to use OpenGL. Thanks for everything! Before anyone gets on my case about it, Fast inverse square root was from Quake III Arena, not Doom 3!

    Read the article

  • Help with Collision of spawned object(postion fixed) with objects that there are translating on screen

    - by Amrutha
    Hey guys I am creating a game using Corona SDK and so coding it in Lua. So there are 2 separate functions, To translate the hit objects and change their color when they are tapped The link below is the code I am using to for the first function http://developer.anscamobile.com/sample-code/fishies Spawn objects that will hit the translating objects on collision. Alos on collision the spawned object disappears and the translating object bears a color(indicating the collision). In addition the size of this spawned object is dependent on i/p volume level. The function I have written is as follows: --VOICE INPUT CODE local r = media.newRecording() r:startRecording() r:startTuner() --local function newBar() -- local bar = display.newLine( 0, 0, 1, 0 ) -- bar:setColor( 0, 55, 100, 20 ) -- bar.width = 5 -- bar.y=400 -- bar.x=20 -- return bar --end local c1 = display.newImage("str-minion-small.png") c1.isVisible=false local c2 = display.newImage("str-minion-mid.png") c2.isVisible=false local c3 = display.newImage("str-minion-big.png") c3.isVisible=false --SPAWNING local function spawnDisk( event ) local phase = event.phase local volumeBar = display.newLine( 0, 0, 1, 0 ) volumeBar.y = 400 volumeBar.x = 20 --volumeBar.isVisible=false local v = 20*math.log(r:getTunerVolume()) local MINTHRESH = 30 local LEFTMARGIN = 20 local v2 = MINTHRESH + math.max (v, -MINTHRESH) v2 = (display.contentWidth - 1 * LEFTMARGIN ) * v2 / MINTHRESH volumeBar.xScale = math.max ( 20, v2 ) local l = volumeBar.xScale local cnt1 = 0 local cnt2 = 0 local cnt3 = 0 local ONE =1 local val = event.numTaps --local px=event.x --local py=event.y if "ended" == phase then --audio.play( popSound ) --myLabel.isVisible = false if l > 50 and l <=150 then --c1:setFillColor(10,105,0) --c1.isVisible=false c1.x=math.random( 10, 450 ) c1.y=math.random( 10, 300 ) physics.addBody( c1, { density=1, radius=10.0 } ) c1.isVisible=true cnt1= cnt1+ ONE return c1 elseif l > 100 and l <=250 then --c2:setFillColor(200,10,0) c2.x=math.random( 10, 450 ) c2.y=math.random( 10, 300 ) physics.addBody( c2, { density=2, radius=9000.0 } ) c2.isVisible=true cnt2= cnt2+ ONE return c2 elseif l >=250 then c3.x=math.random( 40, 450 ) c3.y=math.random( 40, 300 ) physics.addBody( c3, { density=2, radius=7000.0 , bounce=0.0 } ) c3.isVisible=true cnt3= cnt3+ ONE return c3 end end end buzzR:addEventListener( "touch", spawnDisk ) -- touch the screen to create disks Now both functions work fine independently but there is no collision happening. Its almost as if the translating object and the spawn object are on different layers. The translating object passes through the spawn object freely. Can anyone please tell me how to resolve this problem. And how can I get them to collide. Its my first attempt at game development, that too for a mobile platform so would appreciate all help. Also if I have not been specific do let me know. I'll try to frame the query better :). Thanks in advance.

    Read the article

  • What 5 things should SQL Server get rid of?

    - by BuckWoody
    I’ve been “tagged” by my friend Paul Randal. It’s a high-tech way of making someone else do what you want, but since it’s Paul, well, I guess I’m OK with that. He’s asked in his recent blog entry “What five things would you get rid of in SQL Server if you were in charge?” This is, of course, a delicate issue. After all, I work at Microsoft, so anything I say here might be taken as a criticism that would require action – but of course it really doesn’t. Interestingly, you may have more to do with what goes in to SQL Server than I did even as a Program Manager where I “owned” a feature. Unlike many places I’ve worked, Microsoft really does drive its products by what its users want – not every time, and not every user request, mind you, but overall I think we hit the mark pretty well. So, with all of that said, and of course the obligatory statement of “these are my own opinions, and have nothing to do with any official Microsoft position in any way, and do not reflect the opinions of other Microsoft employees or management”, here goes. 1. Get rid of SQL Server Management Studio Does that surprise you? After all, when I was a Program Manager, I actually owned the general architecture for SSMS. But those on my team probably would have been able to guess this one for you. I think that SSMS is a fine development tool. But I think that it does less of a good job for managing a system. It’s based on Visual Studio, probably one of the best development IDE’s around. And when I develop code, I really like it. But for a monitoring/management tool, I prefer a snap-in to the Microsoft Management Console (MMC). I know, the old one (prior to 3.0) was kludgy, difficult to use and program in. But that’s changed. Of course, when I bring this up, you’ll probably immediately say “But I don’t have that in XP.” And that’s one of the reasons we didn’t go there. (But I still don’t like SSMS for management.) 2. ShrinkDB I think this discussion has been done to death, so I’ll leave it at that. 3. SQL Server Agent Does that one surprise you as well? In my mind, since we ALWAYS ride on Windows, just use the task scheduler there, along with PowerShell. You could log the results in Windows logs, files, back into SQL Server, whatever. It’s just a complexity we don’t need in SQL Server. 4. SQL Server Error Logs We have a full logging setup in Windows. They’re well done, easy to understand and ubiquitous. We should just use that. 5. Several SKU’s I won’t say which, but we have a few SKU’s of SQL Server that need to go. And we need to figure out how to help you understand clearly where you need to go to Enterprise or Data Center.  Most folks are trying to push Standard edition to do things it isn’t designed to do, and then they think SQL Server won’t scale. I think we can do a better job of showing you where Standard Edition will hit the wall, and I think with fewer choices it would be pretty simple for you to pick the right one. Well, once again I’ve probably puzzled some folks and angered others. I think my work here is done. :) Back to you, Paul. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

    Read the article

  • Programmatically Making the Selected OutlineView Cell Editable

    - by Geertjan
    When you're using the OutlineView and you use the Tab key to move through its cells, the cells are shown to be selected, as below: However, until you press the Space key in the selected cell, or until you click the mouse within it, you cannot edit it. That's extremely annoying when you're creating a data-entry application. Your user would like to begin editing a cell as soon as they have tabbed into it. Needing to press Space first, or click the mouse in the cell first, is a cumbersome additional step that completely destroys your work flow. Below, you can see that an editable cell looks very different to one that is merely selected: I.e., now I can type and the text changes. How to set up the OutlineView so that the Tab key makes the selected cell editable? Here's the constructor of the TopComponent you see above: public ViewerTopComponent() {     initComponents();     setName(Bundle.CTL_ViewerTopComponent());     setToolTipText(Bundle.HINT_ViewerTopComponent());     setLayout(new BorderLayout());     OutlineView ov = new OutlineView();     final Outline outline = ov.getOutline();     outline.setRootVisible(false);     //When column selection changes, e.g., via Tab key,     //programmatically start editing the cell:     ListSelectionListener listSelectionListener = new ListSelectionListener() {         @Override         public void valueChanged(ListSelectionEvent e) {             int row = outline.getSelectedRow();             int column = outline.getSelectedColumn();             //Ignore the node column:             if (row > -1 && row > -1) {                 outline.editCellAt(row, column);             }         }     };     outline.getColumnModel().getSelectionModel().addListSelectionListener(listSelectionListener);     ov.setPropertyColumns(             "city", "City", "state", "State");     add(ov, BorderLayout.CENTER);     em.setRootContext(             new AbstractNode(Children.create(new CustomerChildFactory(), true)));     associateLookup(ExplorerUtils.createLookup(em, getActionMap())); }

    Read the article

  • How is programming affected by spatial aptitude?

    - by natli
    The longer I work on a project, the less clear it becomes. It's like I cannot seperate various classes/objects anymore in my head. Everything starts mixing up, and it's extremely hard to take it all apart again. I start putting functions in classes where they really don't belong, and make silly mistakes such as writing code that I later find was 100% obsolete; things are no longer clearly mappable in my head. It isn't until I take a step back for several hours (or days somtimes!) that I can actually see what's going on again, and be productive. I usually try to fight through this, I am so passionate about coding that I wouldn't for the life of me know what else I could be doing. This is when stuff can get really weird, I get so up in my head that I sort of lose touch with reality (to some extent) in that various actions, such as pouring a glass of water, no longer happen on a concious level. It happens on auto pilot, during which pretty much all of my concious concentration (is that even a thing?) is devoted to borderline pointless problem solving (trying to seperate elements of code). It feels like a losing battle. So I took an IQ test a while ago (Wechsler Adult Intelligence Scale I believe it was) and it turned out my Spatial Aptitude was quite low. I still got a decent score, just above average, so I won't have to poke things with a stick for a living, but I am a little worried that this is such a handicap when writing/engineering computer programs that I won't ever be able to do it seriously or professionally. I am very much interested in what other people think of this.. could a low spatial aptitude be the cause of the above described problems? Maybe I should be looking more along the lines of ADD or something similar, because I did get diagnosed with ADD at the age of 17 (5 years ago) but the medicine I received didn't seem to affect me that much so I never took it all that serious. Sorry if I got a little off topic there, I know this is not a mental help board, the question should be clear; How is programming affected by spatial aptitude? As far as I know people are born with low/med/high spatial aptitude, so I think it's interesting to find out if the more fortunate are better programmers by birth right.

    Read the article

< Previous Page | 501 502 503 504 505 506 507 508 509 510 511 512  | Next Page >