Search Results

Search found 14940 results on 598 pages for 'android wake lock'.

Page 506/598 | < Previous Page | 502 503 504 505 506 507 508 509 510 511 512 513  | Next Page >

• Why is my disk full?

  - by Agmenor

  I installed Ubuntu 12.04 by doing a fresh install where there was previously Ubuntu 11.10. My computer warns me now that my disk is nearly full. After having run apt-get purge, run apt-get autoremove and emptied the Trash can, I still have this problem as shown by this screenshot of Gparted: The disk /dev/sda7 is indeed full. I ran the Disk Usage Analyzer (Baobab) and I am still not sure of what is happening: One of my hypothesis is that when installing Ubuntu 12.04, I didn't configure my disks well and the disk /dev/sda6 is not mounted well as /home. Is this the reason indeed? What should I do to verify this and then to get the things fixed? Here are a few additional details to answer the questions I received (thank you everybody): My home directory is not encrypted. The Backup utility (Déjà Dup) is not set for automatic backups. (I do it myself and manually.) After I mount /dev/sda6, the command df -h gives Filesystem Size Used Avail Use% Mounted on /dev/sda7 244G 221G 12G 96% / udev 3,9G 4,0K 3,9G 1% /dev tmpfs 1,6G 904K 1,6G 1% /run none 5,0M 0 5,0M 0% /run/lock none 3,9G 164K 3,9G 1% /run/shm /dev/sda6 653G 189G 433G 31% /media/8ec2fa69-039b-4c52-ab1b-034d785132a1 (sorry but formatting this into code does not work, for an unknown reason) Thanks to izx's post, I realized /dev/sda6 was not even mounted before. It contains all the documents I used to have when I was running Ubuntu 11.10.

  Read the article

• Using ConcurrentQueue for thread-safe Performance Bookkeeping.

  - by Strenium

  Just a small tidbit that's sprung up today. I had to book-keep and emit diagnostics for the average thread performance in a highly-threaded code over a period of last X number of calls and no more. Need of the day: a thread-safe, self-managing stats container. Since .NET 4.0 introduced new thread-safe 'Collections.Concurrent' objects and I've been using them frequently - the one in particular seemed like a good fit for storing each threads' performance data - ConcurrentQueue. But I wanted to store only the most recent X# of calls and since the ConcurrentQueue currently does not support size constraint I had to come up with my own generic version which attempts to restrict usage to numeric types only: unfortunately there is no IArithmetic-like interface which constrains to only numeric types – so the constraints here here aren't as elegant as they could be. (Note the use of the Average() method, of course you can use others as well as make your own).   FIFO FixedSizedConcurrentQueue using System;using System.Collections.Concurrent;using System.Linq; namespace xxxxx.Data.Infrastructure{    [Serializable]    public class FixedSizedConcurrentQueue<T> where T : struct, IConvertible, IComparable<T>    {        private FixedSizedConcurrentQueue() { }         public FixedSizedConcurrentQueue(ConcurrentQueue<T> queue)        {            _queue = queue;        }         ConcurrentQueue<T> _queue = new ConcurrentQueue<T>();         public int Size { get { return _queue.Count; } }        public double Average { get { return _queue.Average(arg => Convert.ToInt32(arg)); } }         public int Limit { get; set; }        public void Enqueue(T obj)        {            _queue.Enqueue(obj);            lock (this)            {                T @out;                while (_queue.Count > Limit) _queue.TryDequeue(out @out);            }        }    } }   The usage case is straight-forward, in this case I’m using a FIFO queue of maximum size of 200 to store doubles to which I simply Enqueue() the calculated rates: Usage var RateQueue = new FixedSizedConcurrentQueue<double>(new ConcurrentQueue<double>()) { Limit = 200 }; /* greater size == longer history */   That’s about it. Happy coding!

  Read the article

• Do we ethically have the right to use the MAC Address for verification purposes?

  - by Matt Ridge

  I am writing a program, or starting at the very beginning of it, and I am thinking of purchase verification systems as a final step. I will be catering to Macs, PCs, and possibly Linux if all is said and done. I will also be programming this for smartphones as well using C++ and Objective-C. (I am writing a blueprint before going head first into it) That being said, I am not asking for help on doing it yet, but what I’m looking for is a realistic measurement for what could be expected as a viable and ethical option for purchase verification systems. Apple through the Apple Store, and some other stores out there have their own "You bought it" check. I am looking to use a three prong verification system. Email/password 16 to 32 character serial number using alpha/numeric and symbols with Upper and lowercase variants. MAC Address. The first two are in my mind ok, but I have to ask on an ethical standpoint, is a MAC Address to lock the software to said hardware unethical, or is it smart? I understand if an Ethernet card changes if not part of the logic board, or if the logic board changes so does the MAC address, so if that changes it will have to be re-verified, but I have to ask with how everything is today... Is it ethical to actually use the MAC address as a validation key or no? Should I be forward with this kind of verification system or should I keep it hidden as a secret? Yes I know hackers and others will find ways of knowing what I am doing, but in reality this is why I am asking. I know no verification is foolproof, but making it so that its harder to break is something I've always been interested in, and learning how to program is bringing up these questions, because I don't want to assume one thing and find out it's not really accepted in the programming world as a "you shouldn't do that" maneuver... Thanks in advance... I know this is my first programming question, but I am just learning how to program, and I am just making sure I'm not breaking some ethical programmer credo I shouldn't...

  Read the article

• Quadcopters Play Catch [Video]

  - by Jason Fitzpatrick

  Working like a group of hive-minded bees, these quadcopters come off as almost playful with their ball throwing antics. Courtesy of the folks at the Swiss Federal Institute of Technology in Zurich’s Institute for Dynamic Systems and Control, we’re treated to a video of three quadcopters playing catch in the research facility’s Flying Machine Area. They explain the processes demonstrated in the video: This video shows three quadrocopters cooperatively tossing and catching a ball with the aid of an elastic net. To toss the ball, the quadrocopters accelerate rapidly outward to stretch the net tight between them and launch the ball up. Notice in the video that the quadrocopters are then pulled forcefully inward by the tension in the elastic net, and must rapidly stabilize in order to avoid a collision. Once recovered, the quadrotors cooperatively position the net below the ball in order to catch it. Because they are coupled to each other by the net, the quadrocopters experience complex forces that push the vehicles to the limits of their dynamic capabilities. To exploit the full potential of the vehicles under these circumstances requires several novel algorithms, including: HTG Explains: How Antivirus Software Works HTG Explains: Why Deleted Files Can Be Recovered and How You Can Prevent It HTG Explains: What Are the Sys Rq, Scroll Lock, and Pause/Break Keys on My Keyboard?

  Read the article

• How to control messages to the same port from different emitters?

  - by Alex In Paris

  Scene: A company has many factories X, each emits a message to the same receive port in a Biztalk server Y; if all messages are processed without much delay, each will trigger an outgoing message to another system Z. Problem: Sometimes a factory loses its connection for a half-day or more and, when the connection is reestablished, thousands of messages get emitted. Now, the messages still get processed well by Y (Biztalk can easily handle the load) but system Z can't handle the flood and may lock up and severely delay the processing of all other messages from the other X. What is the solution? Creating multiple receive locations that permits us to pause one X or another would lose us information if the factory isn't smart enough to know whether the message was received or not. What is the basic pattern to apply in Biztalk for this problem? Would some throttling parameters help to limit the flow from any one X? Or are their techniques on the end part of Y which I should use instead ? I would prefer this last one since I can be confident that the message box will remember any failures, which could then be resumed.

  Read the article

• IDirect3DDevice9::GetRenderTargetData() returns no data

  - by P. Avery

  I've got a simple function to get the rendertarget data of an RT( w/default pool ). This particular RT has a resolution of 1x1( it's the 10'th and final mip of a texture ). Here is my code to get data for IDirect3DSurface9 *pTargetSurface: IDirect3DSurface9 *pSOS = NULL; pd3dDevice->CreateOffScreenPlainSurface( 1, 1, D3DFMT_A8R8G8B8, D3DPOOL_SYSTEMMEM, &pSOS, NULL ); // get residual energy if( FAILED( hr = pd3dDevice->GetRenderTargetData( pTargetSurface, pSOS ) ) ) { DebugStringDX( ClassName, "Failed to IDirect3DDevice9::GetRenderTargetData() at DownsampleArea()", __LINE__, hr ); goto Exit; } // lock surface if( FAILED( hr = pSOS->LockRect( &rct, NULL, D3DLOCK_READONLY ) ) ) { DebugStringDX( ClassName, "Failed to IDirect3DSurface9::LockRect() at DownsampleArea()", __LINE__, hr ); goto Exit; } // get residual energy from downsampled texture pByte = ( BYTE* )rct.pBits; D3DXVECTOR4 vEnergy; vEnergy.z = ( float )pByte[ 0 ] / 255.0f; vEnergy.y = ( float )pByte[ 1 ] / 255.0f; vEnergy.x = ( float )pByte[ 2 ] / 255.0f; vEnergy.w = ( float )pByte[ 3 ] / 255.0f; V( pSOS->UnlockRect() ); All formatting and settings are correct, directx in debug mode shows no errors... The problem is that the 4 bytes above are 0...I know this to be incorrect by using PIX to debug...PIX shows that RGB bytes are 0.078 and Alpah is 1. These values are not less than that which can be represented by a single byte( 1 / 255 ). Any ideas? Am I copying rendertarget data correctly?

  Read the article

• Can't remove software - Installed in NULL

  - by ChosSimbaOne

  I've installed software to our administration machine. The problem is that i cannot start the software or uninstall it, as it is not in any directory on the machine. I tried to install it at /pack/CST/... but it is not there and a locate on CST or cst returns nothing. The software is installed from a DVD and not a repository. I've tried to reboot the machine, as i thought i might had something to do with the software being loaded in some sort of tmpfs but that didn't help. I've looked through the entire /etc to check for any relations to the software, but unsuccessfully. I'm out of ideas, to what can cause this problem, anyone got any ideas?? EDIT: I downloaded the iso wich i mounted with: sudo mount -o loop /path/to/iso.iso /path/to/mountpoint sudo /path/to/mountpoint/install.sh Ran the install GUI via an X-session. I choose to install the software in /pack/CST/... but when it exited it said that the software had been installed to /tmp/... There was nothing in tmp, so i decided to reboot the machine and did a full find to see if there was anything left of the software, removed what looked like it could be related. It had placed a script in all the /etc/rs* folder which I removed with: sudo update-rc.d -f scriptname -r I rebooted the machine again, just to be sure. When i run the installer again, it tells me that the software is installed in NULL and i have to remove before installing it. /pack/ is a mountpoint for /q/system/pack What i expected was that the software would be installed in /pack/CST, but it seems to be lock in the system, but I am unable to locate where.

  Read the article

• How do I create the "Gnome-Desktop-Item-Edit" program's launch icon with root privileges and more?

  - by GanZ

  I personally dont prefer running commands in terminal to achieve a task and prefer apps to execute the job. Creating launcher for apps is one such command where I prefer the gnome-desktop-item-edit application for creating launchers. If the gnome package is installed, just searching "create launcher" opens the app. But, it doesnt serve any purpose, because for starters the application cannot create launchers for various apps without root permission and the location where the apps have to be created. Usually the launcher apps with root permission can be created at /usr/share/applications and without root permission at /.local/share/applications. I dont prefer the latter location as it is vulnerable to deletion. Hence, in order to create the launchers through gnome with root, everytime I am forced to open this through terminal using the below command! $ sudo gnome-desktop-item-edit ~/.local/share/applications --create-new I dont want to open terminal everytime I want to create an application launcher on unity! I am able to lock the "Create Launcher" App in the Launcher, but not with root privileges So I want to be able to create the "Create Launcher" app shortcut on unity with default root privileges and for the app to create the launchers at usr/share/applications by default! Please help! P.S. I dont have enough rep points to add screenshots to help with the question!

  Read the article

• Used mountmanager now Ubuntu hangs on boot

  - by fpghost

  I was using MountManager in Ubuntu 12.04 to set user permissions in mounting hard drives. I set each partititon to be mountable by everyone instead of admin only. Then I clicked Apply in the file menu and it gave me the message successfully updated. Upon restarting Ubuntu, just hangs on the splash screen and does not boot any further. Windows still boots fine. How can I fix these? please help thanks From LiveUSB: my fstab looks like: overlayfs / overlayfs rw 0 0 tmpfs /tmp tmpfs nosuid,nodev 0 0 /dev/sda5 swap swap defaults 0 0 /dev/sda7 swap swap defaults 0 0 Is this corrupted? Other things that may be helpful: blkid returns /dev/loop0: TYPE="squashfs" /dev/sda1: LABEL="System Reserved" UUID="0AF26C31F26C22E5" TYPE="ntfs" /dev/sda2: UUID="5E1C88E31C88B813" TYPE="ntfs" /dev/sda3: UUID="94B2BB7DB2BB6282" TYPE="ntfs" /dev/sda5: UUID="41b66b9a-2b48-45cf-b59d-cd50e41ec971" TYPE="swap" /dev/sda6: UUID="c73ca79e-4fa4-4bde-967e-670593736f6a" TYPE="ext4" /dev/sda7: UUID="c05d659f-103c-4444-9dc4-3121b9e081d6" TYPE="swap" /dev/sdb1: LABEL="PENDRIVE" UUID="1DE8-0A49" TYPE="vfat" and cat /proc/mounts rootfs / rootfs rw 0 0 sysfs /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0 proc /proc proc rw,nosuid,nodev,noexec,relatime 0 0 udev /dev devtmpfs rw,relatime,size=1950000k,nr_inodes=206759,mode=755 0 0 devpts /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 0 0 tmpfs /run tmpfs rw,nosuid,relatime,size=783056k,mode=755 0 0 /dev/sdb1 /cdrom vfat rw,relatime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1,shortname=mixed,erro rs=remount-ro 0 0 /dev/loop0 /rofs squashfs ro,noatime 0 0 tmpfs /cow tmpfs rw,noatime,mode=755 0 0 /cow / overlayfs rw,relatime,lowerdir=//filesystem.squashfs,upperdir=/cow 0 0 none /sys/fs/fuse/connections fusectl rw,relatime 0 0 none /sys/kernel/debug debugfs rw,relatime 0 0 none /sys/kernel/security securityfs rw,relatime 0 0 tmpfs /tmp tmpfs rw,nosuid,nodev,relatime 0 0 none /run/lock tmpfs rw,nosuid,nodev,noexec,relatime,size=5120k 0 0 none /run/shm tmpfs rw,nosuid,nodev,relatime 0 0 gvfs-fuse-daemon /home/ubuntu/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,relatime,user_id=999,group_id=999 0 0

  Read the article

• "Unmet Dependencies" problem when trying apt-get install

  - by GChorn

  Anytime I try to install python packages using the command: sudo apt-get install python-package I get the following output: Reading package lists... Done Building dependency tree Reading state information... Done You might want to run 'apt-get -f install' to correct these: The following packages have unmet dependencies: linux-headers-generic : Depends: linux-headers-3.2.0-36-generic but it is not going to be installed linux-headers-generic-pae : Depends: linux-headers-3.2.0-36-generic-pae but it is not going to be installed linux-image-generic : Depends: linux-image-3.2.0-36-generic but it is not going to be installed E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). This seems to have started when these same three packages showed up in Ubuntu's Update Manager and kicked an error when I tried to install them there. Based on the suggestion in the output above, I tried running: sudo apt-get -f install But this only gave me several instances of the following error: dpkg: error processing /var/cache/apt/archives/linux-image-3.2.0-36-generic_3.2.0-36.57_i386.deb (--unpack): unable to create `/lib/modules/3.2.0-36-generic/kernel/drivers/net/wireless/ath/carl9170/carl9170.ko.dpkg-new' (while processing `./lib/modules/3.2.0-36-generic/kernel/drivers/net/wireless/ath/carl9170/carl9170.ko'): No space left on device Now maybe I'm way off-base here, but I'm wondering if the error could be coming from the "No space left on device" part? The thing is, I'm running Ubuntu as a VirtualBox VM but I've got it set to dynamically increase its virtual hard drive space as needed, so why am I still getting this error? Here's my output when I use dh -f: Filesystem Size Used Avail Use% Mounted on /dev/sda1 6.9G 5.7G 869M 88% / udev 494M 4.0K 494M 1% /dev tmpfs 201M 784K 200M 1% /run none 5.0M 0 5.0M 0% /run/lock none 501M 76K 501M 1% /run/shm VB_Shared_Folder 466G 271G 195G 59% /media/sf_VB_Shared_Folder When I perform sudo apt-get -f install and the system says, After this operation, 192 MB of additional disk space will be used. Does that mean 192 MB of my virtual machine's current memory, or 192 MB on top of the rest of my free space? As I said, my machine normally dynamically allocates additional memory from the host machine, so I don't see why there would be memory restrictions at all...

  Read the article

• On Developing Web Services with Global State

  - by user74418

  I'm new to web programming. I'm more experienced and comfortable with client-side code. Recently, I've been dabbling in web programming through Python's Google App Engine. I ran into some difficulty while trying to write some simple apps for the purposes of learning, mainly involving how to maintain some kind of consistent universally-accessible state for the application. I tried to write a simple queueing management system, the kind you would expect to be used in a small clinic, or at a cafeteria. Typically, this is done with hardware. You take a number from a ticketing machine, and when your number is displayed or called you approach the counter for service. Alternatively, you could be given a small pager, which will beep or vibrate when it is your turn to receive service. The former is somewhat better in that you have an idea of how many people are still ahead of you in the queue. In this situation, the global state is the last number in queue, which needs to be updated whenever a request is made to the server. I'm not sure how to best to store and maintain this value in a GAE context. The solution I thought of was to keep the value in the Datastore, attempt to query it during a ticket request, update the value, and then re-store it with put. My problem is that I haven't figured out how to lock the resource so that other requests do not check the value while it is in the middle of being updated. I am concerned that I may end up ticket requests that have the same queue number. Also, the whole solution feels awkward to me. I was wondering if there was a more natural way to accomplish this without having to go through the Datastore. Can anyone with more experience in this domain provide some advice on how to approach the design of the above application?

  Read the article

• How can I get rid of the motd message "*** /dev/sdb1 will be checked for errors at next reboot ***"? [duplicate]

  - by kmm

  This question already has an answer here: Persistent “disk will be checked…” in the message of the day (motd) even after reboot 3 answers My motd persistently has: *** /dev/sdb1 will be checked for errors at next reboot *** The problem is that I don't have /dev/sdb1 on my system. I only have /dev/sdb2 (mouted as /) and /dev/sda1 which mounts to /media/backup. I delete that line from /etc/motd, but it reappears after reboot. Here's my df output: Filesystem Size Used Avail Use% Mounted on /dev/sdb2 73G 3.7G 66G 6% / udev 490M 4.0K 490M 1% /dev tmpfs 200M 760K 199M 1% /run none 5.0M 0 5.0M 0% /run/lock none 498M 0 498M 0% /run/shm /dev/sda1 1.9T 429G 1.4T 25% /media/backup Update Here is the output of sudo fdisk -l Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0003dfc2 Device Boot Start End Blocks Id System /dev/sda1 63 3907024064 1953512001 83 Linux Disk /dev/sdb: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders, total 156301488 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00049068 Device Boot Start End Blocks Id System /dev/sdb1 152301568 156301311 1999872 82 Linux swap / Solaris /dev/sdb2 * 2048 152301567 76149760 83 Linux Partition table entries are not in disk order I guess /dev/sdb1 is my swap space.

  Read the article

• How should VertexBuffers be used with Multiple Monitors in DirectX 9

  - by Joshua C

  I am currently using DirectX 9 on a machine with two GPUs and three monitors. I am currently trying to draw a triangle on each monitor using vertexbuffers; A directx helloworld with multiple monitors if you will. I am familiar with some DirectX coding, but new to multiple monitor DirectX coding. I may be going about this the wrong way, so please do correct me if I'm doing something wrong. I have created a Direct3D Device for each enumerated adapter sharing the same Form handle. This allows me to successfully use all three monitors in full-screen mode. For Each Adapter In Direct3D.Adapters Dim PresentParameters As New PresentParameters 'Setup PresentParameters PresentParameters.Windowed = False PresentParameters.DeviceWindowHandle = MainForm.Handle Dim Device as New Device(Direct3D, Adapter.Adapter, DeviceType.Hardware, PresentParameters.DeviceWindowHandle, CreateFlags.HardwareVertexProcessing, PresentParameters) Device.SetRenderState(RenderState.Lighting, False) Devices.Add(Device) Next I can also draw text to each device successfully using a different Font for each Device. When I render a triangle using a different VertexBuffer for each Device, only two monitors display the triangle. One of the two monitors on the same GPU, and the monitor on it's own GPU display properly. VertexBuffer = New VertexBuffer(Device, 4 * Marshal.SizeOf(GetType(ColoredVertex)), Usage.WriteOnly, VertexFormat.None, Pool.Managed) Dim Verts = VertexBuffer.Lock(0, 0, LockFlags.None) Verts.WriteRange({ New ColoredVertex(-.5, -.5, 1, ForeColor), New ColoredVertex(0, .5, 1, ForeColor), New ColoredVertex(.5, -.5, 1, ForeColor) }) VertexBuffer.Unlock() VertexDeclaration = New VertexDeclaration(Device, { New VertexElement(0, 0, DeclarationType.Float3, DeclarationMethod.Default, DeclarationUsage.Position, 0), New VertexElement(0, 12, DeclarationType.Color, DeclarationMethod.Default, DeclarationUsage.Color, 0), VertexElement.VertexDeclarationEnd }) Render Code: Device.SetStreamSource(0, VertexBuffer, 0, Marshal.SizeOf(GetType(ColoredVertex))) Device.VertexDeclaration = VertexDeclaration Device.DrawPrimitives(PrimitiveType.TriangleList, 0, 1) I have to assume the fact that they share the same physical card comes into play. Should I use multiple buffers on the same card, and if so, how? Or what is the way I should access the VertexBuffer across Devices? Another thought I had was the non working monitor acts like there are no lights. Is turning off lighting on each device on the same card causing issues somehow?

  Read the article

• AGENT: The World's Smartest Watch

  - by Rob Chartier

  AGENT: The World's Smartest Watch by Secret Labs + House of Horology Disclaimer: Most if not all of this content has been gleaned from the comments on the Kickstarter project page and comments section. Any discrepancies between this post and any documentation on agentwatches.com, kickstarter.com, etc.., those official sites take precedence. Overview The next generation smartwatch with brand-new technology. World-class developer tools, unparalleled battery life, Qi wireless charging. Kickstarter Page, Comments Funding period : May 21, 2013 - Jun 20, 2013 MSRP : $249 Other Urls http://www.agentwatches.com/ https://www.facebook.com/agentwatches http://twitter.com/agentwatches http://pinterest.com/agentwatches/ http://paper.li/robchartier/1371234640 Developer Story The first official launch of the preview SDK and emulator will happen on 20-Jun-2013.  All development will be done in Visual Studio 2012, using the .NET Micro Framework SDK 2.3.  The SDK will ship with the first round of the expected API for developers along with an emulator. With that said, there is no need to wait for the SDK.  You can download the tooling now and get started with Apps and Faces immediately.  The only thing that you will not be able to work with is the API; but for example, watch faces, you can start building the basic face rendering with the Bitmap graphics drawing in the .NET Micro Framework.   Does it look good? Before we dig into any more of the gory details, here are a few photos of the current available prototype models.   The watch on the tiny QI Charter   If you wander too far away from your phone, your watch will let you know with a vibration and a message, all but one button will dismiss the message.   An app showing the premium weather data!   Nice stitching on the straps, leather and silicon will be available, along with a few lengths to choose from (short, regular, long lengths). On to those gory details…. Hardware Specs Processor 120MHz ARM Cortex-M4 processor (ATSAM4SD32) with secondary AVR co-processor Flash & RAM 2MB of onboard flash and 160KB of RAM 1/4 of the onboard flash will be used by the OS The flash is permanent (non-volatile) storage. Bluetooth Bluetooth 4.0 BD/EDR + LE Bluetooth 4.0 is backwards compatible with Bluetooth 2.1, so classic Bluetooth functions (BD/EDR, SPP/AVRCP/PBAP/etc.) will work fine. Sensors 3D Accelerometer (Motion) ST LSM303DLHC Ambient Light Sensor Hardware power metering Vibration Motor (You can pulse it to create vibration patterns, not sure about the vibration strength - driven with PWM) No piezo/speaker or microphone. Other QI Wireless Charging, no NFC, no wall adapter included Custom LED Backlight No GPS in the watch. It uses the GPS in your phone. AGENT watch apps are deployed and debugged wirelessly from your PC via Bluetooth. RoHS, Pb-free Battery Expected to use a CR2430-sized rechargeable battery – replaceable (Mouser, Amazon) Estimated charging time from empty is 2 hours with provided charger 7 Days typical with Bluetooth on, 30 days with Bluetooth off (watch-face only mode) The battery should last at least 2 years, with 100s of charge cycles. Physical dimensions Roughly 38mm top-to-bottom on the front face 35mm left-to-right on the front face and around 12mm in depth 22mm strap Two ~1/16" hex screws to attach the watch pin The top watchcase material candidates are PVD stainless steel, brushed matte ceramic, and high-quality polycarbonate (TBD). The glass lens is mineral glass, Anti-glare glass lens Strap options Leather and silicon straps will be available Expected to have three sizes Display 1.28" Sharp Memory Display The display stays on 100% of the time. Dimensions: 128x128 pixels Buttons Custom "Pusher" buttons, they will not make noise like a mouse click, and are very durable. The top-left button activates the backlight; bottom-left changes apps; three buttons on the right are up/select/down and can be used for custom purposes by apps. Backup reset procedure is currently activated by holding the home/menu button and the top-right user button for about ten seconds Device Support Android 2.3 or newer iPhone 4S or newer Windows Phone 8 or newer Heart Rate monitors - Bluetooth SPP or Bluetooth LE (GATT) is what you'll want the heart monitor to support. Almost limitless Bluetooth device support! Internationalization & Localization Full UTF8 Support from the ground up. AGENT's user interface is in English. Your content (caller ID, music tracks, notifications) will be in your native language. We have a plan to cover most major character sets, with Latin characters pre-loaded on the watch. Simplified Chinese will be available Feature overview Phone lost alert Caller ID Music Control (possible volume control) Wireless Charging Timer Stopwatch Vibrating Alarm (possibly custom vibrations for caller id) A few default watch faces Airplane mode (by demand or low power) Can be turned off completely Customizable 3rd party watch faces, applications which can be loaded over bluetooth. Sample apps that maybe installed Weather Sample Apps not installed Exercise App Other Possible Skype integration over Bluetooth. They will provide an AGENT app for your smartphone (iPhone, Android, Windows Phone). You'll be able to use it to load apps onto the watch.. You will be able to cancel phone calls. With compatible phones you can also answer, end, etc. They are adopting the standard hands-free profile to provide these features and caller ID.

  Read the article

• The Best Free Tools for Creating a Bootable Windows or Linux USB Drive

  - by Lori Kaufman

  If you need to install Windows or Linux and you don’t have access to a CD/DVD drive, a bootable USB drive is the solution. You can boot to the USB drive, using it to run the OS setup program, just like a CD or DVD. We have collected some links to free programs that allow you to easily setup a USB drive to install Windows or Linux on a computer. NOTE: If you have problems getting the BIOS on your computer to let you boot from a USB drive, see our article about booting from a USB drive even if your BIOS won’t let you. What Is the Purpose of the “Do Not Cover This Hole” Hole on Hard Drives? How To Log Into The Desktop, Add a Start Menu, and Disable Hot Corners in Windows 8 HTG Explains: Why You Shouldn’t Use a Task Killer On Android

  Read the article

• Use a Windows 8-Like Task Manager in Windows 7, Vista, and XP

  - by Lori Kaufman

  One of the new features in Windows 8 is the improved Task Manager, which provides access to more information and settings. If you don’t want to upgrade, there is a way you can use a simple Windows 8-like Task Manager in Windows 7, Vista, or XP. The Windows 8 Metro Task Manager does not need to be installed. Simply download the .zip file (see the download link at the end of this article), extract the files, and double-click the Windows 8 Task Manager.exe file. A window displays a list of tasks currently running with the status of each task listed. To end a task, select the task in the list and click End Task. Why Does 64-Bit Windows Need a Separate “Program Files (x86)” Folder? Why Your Android Phone Isn’t Getting Operating System Updates and What You Can Do About It How To Delete, Move, or Rename Locked Files in Windows

  Read the article

• Mobile Development- Obtaining development hardware - best practices?

  - by Zoot

  I'm looking to get into smartphone development, but there a quite a few options out there for platforms right now. (iOS/Android/WebOS/Bada/Symbian/MeeGo/WindowsMobile/JavaME) I'd like to have development hardware to test my code and the overall functionality of the devices. What is the best way to obtain and/or borrow hardware for development and testing? Are there rules of thumb to follow which apply to all companies and platforms? In this situation, I'm a single developer. Does this process change for a startup? A hackerspace? A small business? A large business? Thanks.

  Read the article

• How do I generate mipmap .png and model .obj files for LibGDX?

  - by John Murdoch

  I'm playing a bit with LibGDX (OpenGL ES 2.0 wrapper for Android). I found some sample code which used prepared files to load models and mipmap textures for them, e.g., at https://github.com/libgdx/libgdx/blob/master/demos/invaders/gdx-invaders/src/com/badlogic/gdxinvaders/RendererGL20.java it reads .obj file for the model and RGB565 format .png file to apply a mipmapped texture to it. What is the best / easiest way for me to create these files? I understand .obj files are generated by a bunch of tools (I installed Blender, Wings3D and Kerkythea so far), but which ones will be the most user friendly for someone unfamiliar with 3D modelling? But more importantly, how do I produce a .png file with the mipmapped texture? The .png I looked at ( https://github.com/libgdx/libgdx/blob/master/demos/invaders/gdx-invaders/data/ship.png ) seems to include different textures for each of the faces, probably created with some tool. I browsed through the menus for the 3 tools I have installed but didn't find an option to export such a .png file. What am I missing?

  Read the article

• Daisies and Rye Swaying in the Summer Wind Wallpaper

  - by Asian Angel

  Flowers [DesktopNexus] Latest Features How-To Geek ETC Should You Delete Windows 7 Service Pack Backup Files to Save Space? What Can Super Mario Teach Us About Graphics Technology? Windows 7 Service Pack 1 is Released: But Should You Install It? How To Make Hundreds of Complex Photo Edits in Seconds With Photoshop Actions How to Enable User-Specific Wireless Networks in Windows 7 How to Use Google Chrome as Your Default PDF Reader (the Easy Way) Reclaim Vertical UI Space by Moving Your Tabs to the Side in Firefox Wind and Water: Puzzle Battles – An Awesome Game for Linux and Windows How Star Wars Changed the World [Infographic] Tabs Visual Manager Adds Thumbnailed Tab Switching to Chrome Daisies and Rye Swaying in the Summer Wind Wallpaper Read On Phone Pushes Data from Your Desktop to the Appropriate Android App

  Read the article

• Ask How-To Geek: How Can I Monitor My Bandwidth Usage?

  - by Jason Fitzpatrick

  If you’re lucky you enjoy wide open internet access with out restriction (or restrictions so high you would have to work all month to meet them). If you’re not so lucky, you’ve got an ISP with heavy caps. Today we help out a reader working under such a cap. Latest Features How-To Geek ETC Internet Explorer 9 RC Now Available: Here’s the Most Interesting New Stuff Here’s a Super Simple Trick to Defeating Fake Anti-Virus Malware How to Change the Default Application for Android Tasks Stop Believing TV’s Lies: The Real Truth About "Enhancing" Images The How-To Geek Valentine’s Day Gift Guide Inspire Geek Love with These Hilarious Geek Valentines Can the Birds and Pigs Really Be Friends in the End? [Angry Birds Video] Add the 2D Version of the New Unity Interface to Ubuntu 10.10 and 11.04 MightyMintyBoost Is a 3-in-1 Gadget Charger Watson Ties Against Human Jeopardy Opponents Peaceful Tropical Cavern Wallpaper SnapBird Supercharges Your Twitter Searches

  Read the article

• West Palm Beach Developer Group March 2012 Meeting Recap

  - by Sam Abraham

  Our West Palm Beach Developer Group March 2012 meeting featured Herve Roggero, Azure MVP and co-founder of Pyn Logic.  Herve covered multiple case studies on migrating existing application to SQL Azure.  This event was quiet popular filling-in our meeting room. We would like to thank PC Professor for hosting our meeting and Sherlock Technology for sponsoring our free food. Our April 24th, 2012 meeting will feature Will Tartak who will be demonstrating how he used ServiceStack.net to quickly develop Windows Phone and Android applications. For more information and to register, please visit: http://www.fladotnet.com/Reg.aspx?EventID=585 Below are some photos of our March event: .

  Read the article

• Cocos2d+pybox2d vs Cocos2d-Iphone

  - by DraskyVanderhoff

  I'm now working with two guys for making our first pc indie game and we decide to use cocos2d+pybox2d ( yeah , 2d python game :) ). We decide this based on what i seen in cocos2d iphone games , but i don't get very clear if cocos2d-iphone is just a porting with just a little more features or is far more better than cocos2d for pc. If you can get me out of this dilemma it would be great. I just want to be sure that i'm on the right track ( and also i want to porting this game for android and iphone if it got success in pc , but first my lovely pc :P ) PD: For the maps we will use Tiled , so is totally compatible with cocos2d ( any of both cases i think... )

  Read the article

• Why Doesn’t Disk Cleanup Delete Everything from the Temp Folder?

  - by The Geek

  After you’ve used Disk Cleanup, you probably expect every temporary file to be completely deleted, but that’s not actually the case. Files are only deleted if they are older than 7 days old, but you can tweak that number to something else. This is one of those tutorials that we’re showing you for the purpose of explaining how something works, but we’re not necessarily recommending that you implement it unless you really understand what’s going on. Keep reading for more Latest Features How-To Geek ETC The How-To Geek Guide to Learning Photoshop, Part 8: Filters Get the Complete Android Guide eBook for Only 99 Cents [Update: Expired] Improve Digital Photography by Calibrating Your Monitor The How-To Geek Guide to Learning Photoshop, Part 7: Design and Typography How to Choose What to Back Up on Your Linux Home Server How To Harmonize Your Dual-Boot Setup for Windows and Ubuntu Hang in There Scrat! – Ice Age Wallpaper How Do You Know When You’ve Passed Geek and Headed to Nerd? On The Tip – A Lamborghini Theme for Chrome and Iron What if Wile E. Coyote and the Road Runner were Human? [Video] Peaceful Winter Cabin Wallpaper Store Tabs for Later Viewing in Opera with Tab Vault

  Read the article

• What You Said: The Technology You’re Most Thankful For

  - by Jason Fitzpatrick

  Earlier this week we asked you to share the technology you were most thankful for–big or small, old or new–and you responded. Read on to see the tech your fellow readers are thankful to have. Many readers were thankful for the Internet as an entire technological advance. Lee writes: I’d probably have to say the Internet in general, because that has essentially inspired most most of the features in modern technology. Plus, I wouldn’t know nearly as much about tech now if I didn’t have access to the Internet. Jim is especially thankful for the Internet: The Internet. The information I’ve found and people I’ve met, (including my wife), have been life changing. Why Does 64-Bit Windows Need a Separate “Program Files (x86)” Folder? Why Your Android Phone Isn’t Getting Operating System Updates and What You Can Do About It How To Delete, Move, or Rename Locked Files in Windows

  Read the article

• The Best Free Online First Person Shooter (FPS) Games

  - by Lori Kaufman

  First Person Shooter (FPS) games are action games centered around gun and projectile weapon-based combat. As the player, you experience the action directly through the eyes of the protagonist. FPS games have become a very popular type of game online. A lot of FPS games are paid, but there are many you can play for free. Most FPS games have online versions where you play in a supported browser or download a program for your PC that allows you to connect to the game online. We have collected links and information about some of the more popular free FPS games available. All the games listed here are free to play, but there may be some limitations, and you have to register for many of them and download game clients to your computer to be able to connect to the game online. Secure Yourself by Using Two-Step Verification on These 16 Web Services How to Fix a Stuck Pixel on an LCD Monitor How to Factory Reset Your Android Phone or Tablet When It Won’t Boot

  Read the article

< Previous Page | 502 503 504 505 506 507 508 509 510 511 512 513  | Next Page >