Search Results

Search found 20671 results on 827 pages for 'android device'.

Page 507/827 | < Previous Page | 503 504 505 506 507 508 509 510 511 512 513 514  | Next Page >

• file copy error from system to cifs mount

  - by dwpriest

  When coping a file greater than 64kB from an Ubuntu server to a CIFS mounted windows share, most of the data is copied, but it seems the last chunk doesn't get copied. The size doesn't match, and the md5 check sums don't match. I have plenty of file space, but then I use cp, I get the following... cp: closing `cloudBackup/asdf.txt': No space left on device Using rsync, I get the following... rsync: close failed on "/home/fluffy/cloudBackup/.asdf.txt.qrBWe6": No space left on device (28) rsync error: error in file IO (code 11) at receiver.c(752) [receiver=3.0.8] rsync: connection unexpectedly closed (29 bytes received so far) [sender] rsync error: error in rsync protocol data stream (code 12) at io.c(601) [sender=3.0.8] I have full read/write permissions on the mounted share. I can copy locally and between the mount and system via SSH just fine. Any ideas? Thank you

  Read the article

• Changing internal home network ip address for connected devices

  - by oshirowanen

  I have a few computers at home. For each of the computers, I can see the internal home network ip address on any given device by typing in ifconfig in the terminal. If the device is connected to the home network via ethernet connection or via the built-in wireless connections in laptops, the internal ip address for each of the devices seems to be 192.168.0.X. However, when I connect one of the devices using an external usb modem wireless adapter, which connects to the home network through wireless, when I check the ip address via ifconfig, for some reason it gets assigned 192.168.42.X instead. Why are the ethernet and build in wireless connections getting 192.168.0.X, but the external usb wireless adapter gets 192.168.42.X? Most importantly, is it possible to force it to get an internal ip address of 192.168.0.X?

  Read the article

• wacom bamboo connect CTL470 "no tablet detected..."

  - by LAS

  Wacom bamboo connect CTL470 - "no tablet detected ..." I downloaded and attempted to install drivers and software -- I am relatively new in ubuntu and downloaded, extracted,ran in terminal but could not successfully install drivers and software for this device. All of this took up a good deal of space on the drive. Manual compilation failed. I need some help. How do I install so as to use this device? Or please direct me to a suitable (relative beginner) "how to". i have downloaded several packages but the install fails in Software Center and Synaptic. System: HP a1220n Intel Pentium 4 CPU 2.93 GHz OS Type 32 bit Ubuntu 11.10

  Read the article

• Periodic clicking sound from PC speaker

  - by John J. Camilleri

  After an update some months ago, my laptop has begun making a low, repeated clicking sound every few seconds. It is not being generated through the regular sound system, as altering the volume and even muting the sound does not make any difference. My regular audio works fine, by the way, so I am guessing this is some sort of PC speaker, since I cannot hear the click when I listen through regular headphones. Strangely, when I open the sound settings dialog the click magically disappears. I don't need to change any settings; if I simply leave the dialog open in the background then the problem disappears. Any ideas what this could be? I am running regular Ubuntu 12.04, and this is the output from lspci -v | grep -A7 -i "audio": 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02) Subsystem: Acer Incorporated [ALI] Device 0349 Flags: bus master, fast devsel, latency 0, IRQ 44 Memory at 54200000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel

  Read the article

• Unable to mount samsung galaxy S3 via USB

  - by dez93_2000

  Connecting as either MTP or PTP: neither allows one to see pictures saved as default by phone camera to DCIM folder on external SD card. Similar problems with previous models (e.g. S2) were solvable by 'usb utilities' in wireless & networking settings, but this is no longer present. Other suggestions have mentioned uninstalling various libraries... but i don't wanna just start cutting stuff without knowing it'll help. Any thoughts? Seems like a pretty epic fail from google & samsung. There's not even a linux section on the relevant google site... despite android's usb driver being part of the linux kernel which powers android. Boo!

  Read the article

• Wubi 12.04 boot error message

  - by Leandro

  Im having a boot problem with my Wubi 12.04 system. When Ubuntu starts to boot up, a message will appear in my screen and it's something like: T#s..... does not exist Sorry, I couldn't read all the message. Then another message pop-out after Ubuntu loading screen this time the message is this: Gave up waiting for root device. Common problems: -Boot args (cat /proc/cmdline) -check rootdelay= (did the system wait long enough?) -check root= (did the system wait for the right device?) -missing module (cat /proc/module: ls /dev) ALERT! /dev/disk/by/by_uuid/EODC2345DC231576 does not exist. Dropping to a shell

  Read the article

• HedgeWar code confusion

  - by BluFire

  I looked at an open source project(HedgeWars) that was built using many programming languages such as C++ and Java. While I was looking through the code, I couldn't help noticing that all the math and physics were gone from the Java code. HedgeWars I imported the project file called "SDL-android-project" which was a sub folder to "android build" and project files. My question is where is all the math and physics inside the code? Do I have to look at the C++ code in order to see it? I think Hedgewars was originally programmed in C++ but the files are confusing be because of its size and the fact that it has several programming languages inside.

  Read the article

• what exactly is system programming?

  - by kentjh

  I have never understood what system programming meant. The usual definition given is "...doing something close to the Os or extending Os features...". Does using Windows API directly rather than some libraries to say do file i/o make it system programming? Was writing Android OS system programming? If I write something that would expose linux kernel through a console like app on Android am I doing system programming? If I am writing software to control a washing machine am I writing system programming? I am a beginner in programming and this is confusing me to no end. Please explain contrasting it with "application programming".

  Read the article

• How to Change the Window Border Size in Windows 8

  - by Chris Hoffman

  The window borders on Windows 8’s desktop are fairly thick by default, but they don’t have to be – you can customize the side of the window borders with an easy-to-use application or a quick registry tweak. You can shrink the window borders and make them fairly thin, just as they were on previous versions of Windows. Or you can increase the window border size and make them extremely thick, if you prefer.. HTG Explains: Does Your Android Phone Need an Antivirus? How To Use USB Drives With the Nexus 7 and Other Android Devices Why Does 64-Bit Windows Need a Separate “Program Files (x86)” Folder?

  Read the article

• Java ME Tech Holiday Gift Idea #3: Kindle Touch Wi-Fi

  - by hinkmond

  Here's a Java ME tech-enabled device holiday gift idea: The venerable Amazon Kindle Touch with built-in Wi-Fi. Niiiice! See: Java ME Tech Gift Idea #3 Here's a quote: + Most-advanced E Ink display, now with multi-touch + New sleek design - 8% lighter, 11% smaller, holds 3,000 books + Only e-reader with text-to-speech, audiobooks and mp3 support + Built in Wi-Fi - Get books in 60 seconds If you want to give someone special a cool device, you want to give something with Java ME technology. Give only the best this holiday season! Hinkmond

  Read the article

• Audio codec consuming high battery power

  - by Vamsi Emani

  My powertop reports this for the two audio codec components. 4.85 W 100.0% Device Audio codec hwC0D3: Intel 4.85 W 100.0% Device Audio codec hwC0D0: Realtek I think 10 W for audio is too high. Can somebody please suggest me a way to reduce the power consumption? It'd be nice if someone could educate me on this, I have an idea about codecs in general but I have no clue about their internals? Why is it that these two components keep running always even when I am not listening to audio?

  Read the article

• Boot-Repair after messing up NTFS partition

  - by QuietThud

  I posted this question explaining what happened after I tried to create a new swap partition on a Win/Ubuntu dual-boot machine. I have since created a live-boot USB and installed Boot-Repair. I had it "recommend repairs", after which it tried repairing the wubi filesystems, which as far as I'm aware was not necessary. I'm not sure where to go from here; I don't care very much about backing up my files, I just want to be able to boot the machine. In the Advanced Options the "Repair Windows boot files" box is uncheckable both GRUB tabs are unclickable (I do have GRUB installed) Here is my Pastebinit with the details from the Boot-Repair. Please be as explicit as possible, as I am proving to be disproportionately bad at this type of task. Thank you! P.S. I keep seeing: cryptsetup: WARNING: failed to detect canonical device of overlayfs cryptsetup: WARNING: could not determine root device from /etc/fstab TestDisk: GPARTED:

  Read the article

• Inside the Raspberry Pi Factory

  - by Jason Fitzpatrick

  Curious where your pint-sized Raspberry Pi came from? You might be surprised to learn it was built, tested, and packaged all in an equally pint-sized factory in South Wales. Nick Heath of Tech Republic takes us on a photo tour of the Raspberry Pi factory with a stop at each stage of production and testing. The photo above shows one of the manual construction steps, the insertion of the large components such as the USB and Ethernet ports. Hit up the link below for the full tour. Raspberry Pi: Inside the Pi Factory [Tech Republic] Our Geek Trivia App for Windows 8 is Now Available Everywhere How To Boot Your Android Phone or Tablet Into Safe Mode HTG Explains: Does Your Android Phone Need an Antivirus?

  Read the article

• Wifi problem in ubuntu using macbook pro when it restart

  - by Amro

  I was read that subject : http://ubuntuforums.org/showthread.php?t=2011756 and i follow it step by step in the page n 1 , then i was connect but after i restart my macbook again , i was lost the wifi connection.i dont know why or whats the problem exactly. every time I run this command: dmesg | grep -e b43 -e bcma I get this output: [ 2012.769684] bcma-pci-bridge 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 2012.769701] bcma-pci-bridge 0000:02:00.0: setting latency timer to 64 [ 2012.769775] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x25, class 0x0) [ 2012.769808] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x1D, class 0x0) [ 2012.769889] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x13, class 0x0) [ 2012.770175] bcma: PMU resource config unknown for device 0x4331 [ 2012.824527] bcma: Bus registered [ 2012.831744] b43-phy0: Broadcom 4331 WLAN found (core revision 29) [ 2013.371031] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07) and to get the connection again every time i must entery that code in the step of reload driver. How i can let the ubuntu see my wifi and wireless device automatically when i reboot my computer????

  Read the article

• Make a Geeky Lego Key Holder for Your Home [Quick DIY Project]

  - by Asian Angel

  LEGOs are terrific fun to work with whether you are in a playful mood or working on a personal geeky project. With that in mind the Mini-eco blog has an quick and easy tutorial for making an awesome LEGO key holder for your home or office. The best part about this project is the amount of personalization in colors and/or themes (i.e. Star Wars, Indiana Jones, etc.) that you can bring to it. To get started just visit the blog post linked below… DIY Lego Key Holder [via BoingBoing] How To Use USB Drives With the Nexus 7 and Other Android Devices Why Does 64-Bit Windows Need a Separate “Program Files (x86)” Folder? Why Your Android Phone Isn’t Getting Operating System Updates and What You Can Do About It

  Read the article

• Multiple Audio Issues

  - by Lerp

  I am having issues with my audio on Ubuntu 12.04, I will try and give as much detail as possible so sorry if there's too much detail. The Problem Audio plays from both speakers and headphone regardless of what connector I choose and regardless of the profile I use. The microphone is constantly being played through headphones & speakers. The headphone audio is extremely quiet but plays from both ears when I select "Headphones" for the connector in Sound Settings. The headphone audio only plays from one ear and is quiet (but not as quiet as above) when I select "Analogue Output" for the connector in Sound Settings. I can only select "Headphones" as the connector in Sound Settings if I set the profile to either "Analogue Stereo Output/Duplex", all others only allow me to choose "Analogue Output" for the connector. Despite the headphone sound issues, the speaker sound is fine apart from the fact that I am not able to select which output is used, they just both play. My headphone and microphone are plugged into the front and my speakers are plugged into the back. What I have tried I have put everything in alsamixer to 100 apart from "Front Mic Boost" which I have set to 0. Command Output aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: AD198x Analog [AD198x Analog] Subdevices: 0/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 1: AD198x Digital [AD198x Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 2: AD198x Headphone [AD198x Headphone] Subdevices: 1/1 Subdevice #0: subdevice #0 arecord -l **** List of CAPTURE Hardware Devices **** card 0: Intel [HDA Intel], device 0: AD198x Analog [AD198x Analog] Subdevices: 2/3 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 Subdevice #2: subdevice #2 cat /proc/asound/cards 0 [Intel ]: HDA-Intel - HDA Intel HDA Intel at 0xf7ff8000 irq 70 cat /proc/asound/modules 0 snd_hda_intel cat /proc/asound/card*/codec* | grep "Codec" Codec: Analog Devices AD1989B cat /etc/modprobe.d/alsa-base.conf # autoloader aliases install sound-slot-0 /sbin/modprobe snd-card-0 install sound-slot-1 /sbin/modprobe snd-card-1 install sound-slot-2 /sbin/modprobe snd-card-2 install sound-slot-3 /sbin/modprobe snd-card-3 install sound-slot-4 /sbin/modprobe snd-card-4 install sound-slot-5 /sbin/modprobe snd-card-5 install sound-slot-6 /sbin/modprobe snd-card-6 install sound-slot-7 /sbin/modprobe snd-card-7 # Cause optional modules to be loaded above generic modules install snd /sbin/modprobe --ignore-install snd $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-ioctl32 ; /sbin/modprobe --quiet --use-blacklist snd-seq ; } # # Workaround at bug #499695 (reverted in Ubuntu see LP #319505) install snd-pcm /sbin/modprobe --ignore-install snd-pcm $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-pcm-oss ; : ; } install snd-mixer /sbin/modprobe --ignore-install snd-mixer $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-mixer-oss ; : ; } install snd-seq /sbin/modprobe --ignore-install snd-seq $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; /sbin/modprobe --quiet --use-blacklist snd-seq-oss ; : ; } # install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; : ; } # Cause optional modules to be loaded above sound card driver modules install snd-emu10k1 /sbin/modprobe --ignore-install snd-emu10k1 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-emu10k1-synth ; } install snd-via82xx /sbin/modprobe --ignore-install snd-via82xx $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq ; } # Load saa7134-alsa instead of saa7134 (which gets dragged in by it anyway) install saa7134 /sbin/modprobe --ignore-install saa7134 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist saa7134-alsa ; : ; } # Prevent abnormal drivers from grabbing index 0 options bt87x index=-2 options cx88_alsa index=-2 options saa7134-alsa index=-2 options snd-atiixp-modem index=-2 options snd-intel8x0m index=-2 options snd-via82xx-modem index=-2 options snd-usb-audio index=-2 options snd-usb-caiaq index=-2 options snd-usb-ua101 index=-2 options snd-usb-us122l index=-2 options snd-usb-usx2y index=-2 # Ubuntu #62691, enable MPU for snd-cmipci options snd-cmipci mpu_port=0x330 fm_port=0x388 # Keep snd-pcsp from being loaded as first soundcard options snd-pcsp index=-2 # Keep snd-usb-audio from beeing loaded as first soundcard options snd-usb-audio index=-2 Hopefully I have provided enough information, I will happily provide anymore information needed. Thank you. Update Reinstalling alsa-base and pulseaudio fixed the headphone issues I was having.

  Read the article

• How can I optimize my development machines files/dirs?

  - by LuxuryMode

  Like any programmer, I've got a lot of stuff on my machine. Some of that stuff is projects of my own, some are projects I'm working on for my employer, others are open-source tools and projects, etc. Currently, I have my files organized as follows: /Code --/development (things I'm sort of hacking on plus maybe libraries used in other projects) --/scala (organized by language...why? I don't know!) --/android --/ruby --/employer_name -- /mobile --/android --/ios --/open-source (basically my forks that I'm pushing commits back upstream from) --/some-awesome-oss-project --/another-awesome-one --/tools random IDE settings sprinkled in here plus some other apps As you can see, things are kind of a mess here. How can I keep things organized in some sort of coherent fashion?

  Read the article

• RTL8192SU-based Wi-Fi adapter disconnects permanently

  - by leventov

  I've already tried all possible (http://ubuntuforums.org/showpost.php?p=10129571&postcount=43) solutions, no progress. I'm in despair. In Windows (on the same machine) this adapter works stably. Device: Trendnet TEW-649UB. System details: Ubuntu 11.10; leventov@leventov-ubuntu:~$ uname -a Linux leventov-ubuntu 3.0.0-12-generic #20-Ubuntu SMP Fri Oct 7 14:56:25 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux leventov@leventov-ubuntu:~$ lsusb ... Bus 002 Device 002: ID 0bda:8172 Realtek Semiconductor Corp. RTL8191S WLAN Adapter ... leventov@leventov-ubuntu:~$ dmesg | grep 8712 #current driver [ 8.146510] r8712u: module is from the staging directory, the quality is unknown, you have been warned. [ 8.147113] r8712u: DriverVersion: v7_0.20100831 [ 8.147124] r8712u: register rtl8712_netdev_ops to netdev_ops [ 8.147127] r8712u: USB_SPEED_HIGH with 4 endpoints [ 8.147478] r8712u: Boot from EFUSE: Autoload OK [ 8.551272] r8712u: CustomerID = 0x0000 [ 8.551275] r8712u: MAC Address from efuse = 00:14:d1:6c:52:19 [ 8.551625] usbcore: registered new interface driver r8712u [ 9.501351] r8712u: Loading firmware from "rtlwifi/rtl8712u.bin" [ 10.160471] r8712u: 1 RCR=0x153f00e [ 10.161241] r8712u: 2 RCR=0x553f00e leventov@leventov-ubuntu:~$ lsmod | grep 8712 r8712u 189049 0 t

  Read the article

• How to Power Cycle Your Gadgets To Fix Freezes and Other Problems

  - by Chris Hoffman

  Have you ever had a smartphone, laptop, tablet, or any other electronic gadget become unresponsive? The surefire way to recover from the freeze – assuming it’s not a hardware problem – is by power-cycling the gadget. Most geeks know that pulling and reinserting a device’s battery will force it to recover from a freeze and boot right back up, but what if the device doesn’t have a removable battery? Image Credit: Alan Levine on Flickr Secure Yourself by Using Two-Step Verification on These 16 Web Services How to Fix a Stuck Pixel on an LCD Monitor How to Factory Reset Your Android Phone or Tablet When It Won’t Boot

  Read the article

• Disc Drives: An Endangered Species

  - by Jason Fitzpatrick

  More and more computers are shipping sans-disc drive leading many industry watchers to proclaim the optical disc an endangered species on its way out. Do you still use your drive or are you letting the disc go? CNN Tech reports on the trend: Apple’s new iMac, its flagship desktop computer, was released Friday. For the first time, it has no disc drive. This marks a trend that has already begun on some laptops, like Apple’s MacBook Airs, and of course with mobile devices like smartphones and tablets. “Over time, an optical disc will be as much of an historical curiosity as a floppy disk,” said Michael Gartenberg, a tech-industry analyst with research firm Gartner Inc. According to Apple, where sleeker, thinner designs are always en vogue, dumping the disc drive was a no-brainer. How to Factory Reset Your Android Phone or Tablet When It Won’t Boot Our Geek Trivia App for Windows 8 is Now Available Everywhere How To Boot Your Android Phone or Tablet Into Safe Mode

  Read the article

• How to handle encryption key conflicts when synchronizing data?

  - by Rafael

  Assume that there is data that gets synchronized between several devices. The data is protected with a symmetric encryption algorithm and a key. The key is stored on each device and encrypted with a password. When a user changes the password only the key gets re-encrypted. Under normal circumstances, when there is a good network connection to other peers, the current key gets synchronized and all data on the new device gets encrypted with the same key. But how to handle situations where a new device doesn’t have a network connection and e.g. creates its own new, but incompatible key? How to keep the usability as high as possible under such circumstances? The application could detect that there is no network and hence refuse to start. That’s very bad usability in my opinion, because the application isn’t functional at all in this case. I don’t consider this a solution. The application could ignore the missing network connection and create a new key. But what to do when the application gains a network connection? There will be several incompatible keys and some parts of the underlying data could only be encrypted with one key and other parts with another key. The situation would get worse if there would be more keys than just two and the application would’ve to ask every time for a password when another object that should get decrypted with another key would be needed. It is very messy and time consuming to try to re-encrypt all data that is encrypted with another key with a main key. What should be the main key at all in this case? The oldest key? The key with the most encrypted objects? What if the key got synchronized but not all objects that got encrypted with this particular key? How should the user know for which particular password the application asks and why it takes probably very long to re-encrypt the data? It’s very hard to describe encryption “issues” to users. So far I didn’t find an acceptable solution, nor some kind of generic strategy. Do you have some hints about a concrete strategy or some books / papers that describe synchronization of symmetrically encrypted data with keys that could cause conflicts?

  Read the article

• Why does sound stop working after a while?

  - by badp

  I don't know how to reproduce this problem, because I don't regularly play music or sound. All I know is that, sometimes, I'll load a video (from youtube or from a local file) and there will be no sound. Everything looks fine software wise: Rebooting always fixes. aplay, paplay and pals give no error message I'm not in the audio group, as advised The device exists and appears in use: $ lsof /dev/snd/by-path/pci-0000\:00\:1b.0 COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME pulseaudi 17313 badp 23u CHR 116,10 0t0 7628 /dev/snd/by-path/../controlC0 pulseaudi 17313 badp 30u CHR 116,10 0t0 7628 /dev/snd/by-path/../controlC0 Restarting pulseaudio or alsa seems to do no good. What is wrong here?

  Read the article

• Oracle ADF Mobile is Now Available!

  - by Michelle Kimihira

  We are happy to announce availability of Oracle ADF Mobile, part of Oracle ADF (Application Development Framework). Oracle ADF is an HTML5 & Java-based framework that enables developers to build and deploy to iOS and Android devices from one application code base. By using open standards like HTML5 for a cross-platform consistent interface and Java for the application logic, companies can readily leverage existing skill and resources to develop mobile applications for iOS and Android.  There’s no need to learn a new platform specific programming language for each device.  With Oracle ADF Mobile -  you simply write once, deploy to many! Read the press release here.     On Wednesday, we will be featuring a blog on developing mobile applications and exploring the different options: Web, Native, or Hybrid. Additional Information Blog: ADF Blog Product Information on OTN: ADF Mobile Product Information on Oracle.com: Oracle Fusion Middleware Follow us on Twitter and Facebook Subscribe to our regular Fusion Middleware Newsletter

  Read the article

• Adobe Tosses in Flash Towel After Apple Limits iPhone Dev

  The company will focus on Flash for Android instead.

  Read the article

• Adobe Tosses in Flash Towel After Apple Limits iPhone Dev

  The company will focus on Flash for Android instead.

  Read the article

< Previous Page | 503 504 505 506 507 508 509 510 511 512 513 514  | Next Page >