Search Results

Search found 18911 results on 757 pages for 'device manager'.

Page 507/757 | < Previous Page | 503 504 505 506 507 508 509 510 511 512 513 514  | Next Page >

• Keyboard/Mouse not working when windows vista has reached login screen

  - by Jonas

  I currently have a problem with a system (vista home premium, 64bit). USB kbd/mouse will not work when windows has booted/loaded their drivers and Im stuck at the login screen with no working input devices. None of the available boot options after F8 will boot to working kbd/mouse. They work in the bios setup and they seem powered all the way until a few seconds before the login screen. Legacy USB devices is also enabled in the bios. They also work with the recovery dvd, but I am unable to start the device manager to check or uninstall the mouse/kbd drivers. Cant get devmgmt.msc nor devmgr.dll (with rundll32) to work. System repair does not detect the problem and there are no available restore points (it was disabled). Any ideas?

  Read the article

• What does the NTFS encryption protect against?

  - by Ray

  I have encrypted a folder from the (PropertiesAdvancedEncrypt contents to secure data). However when I change my user profile to another one which is also an administrator the folder seems to be accessible as if nothing happened. What exactly does this encryption protect against. I'm looking to encrypt folders that no other user, or another OS or even if the HDD were to be removed and plugged to another device will be accessible. My OS is Windows 7 Ultimate. Any suggestions?

  Read the article

• Where do I find Nmake for Windows XP

  - by Shrujan

  Regarding BioPerl installation in Windows XP, I have installed Active Perl in Windows XP, and by using Perl Package Manager I have installed the BioPerl Repositories too. But I am not able to run the BioPerl yet. While running the BioPerl program in emacs it is showing the following error: make -k 'make' is not recognized as internal or external command, operable program or batch file I have tried to install Nmake for Windows but this error is showing. No webpage was found for the web address: http://download.microsoft.com/download/vc15/patch/1.52/w95/en-us/nmake15.exe How could this be resolved?

  Read the article

• Excluding four IP's from a /32 static route

  - by Justin

  I have a Cisco ASA routing a /32 of public addresses (non RFC-1812) through a private link. When the device sees the destination address it selects the private route instead of going out over the public network. This works great but I am now trying to exclude 4 IP's from the private route. Traffic to these addresses should go over the public internet instead of being routed over the private network. Can I just add anothe route for these four IP's or do I have to modify the existing route for the /32?

  Read the article

• What protocols will/are ISPs use for IPv6 deployment?

  - by rbeede

  Currently ISPs deal out addresses via DHCP for IPv4 dynamic (single) addresses. What protocol will/are ISPs going to use for IPv6 when they can hand a customer an entire /64 (or /48 if they are nice) block? DHCPv6, RA? For ISPs that support true end-to-end IPv6 will they provide gateway devices (similar to cable modem or true DSL bridges for example) that receive border information for that specific customer? I'm just trying to get an idea of how your common residential service customer will have to configure things in an IPv6 Internet (whenever that comes). Will it be something customers are expected to statically configure on their home wireless router? Today with IPv4 I do it like this: Modem (bridge) passes public IPv4 obtained via DHCPv4 from ISP to second device (wireless router). It in turn has its own DHCPv4 service it provides on the internal lan.

  Read the article

• Is there a way to save "work sessions" in linux

  - by mike

  I regularly work on different projects, using different software. For project 1 I need to open for ex : Filezilla, Gedit and Nautilus (set to a specific folder) For project 2 I need to open foz ex : Gimp, Nautilus (set to another specific folder) etc. What I would like is a kind of sessions manager, where I could create entries "project 1", "project 2", etc. And with one click or command, open all the softwares I need. Perhaps there's an easy way to write a batch file for this? Any idea is welcome :)

  Read the article

• Windows 8.1 wants to format a USB stick with an unusual but valid GPT partitioning scheme, why?

  - by DonGar

  I have a USB stick formatted with GPT partitions. Some of the partitions are ext2, some are ext4, some are custom and funky. However, there is also a standard EFI partition, and a standard vfat partition. In Windows 7, both the EFI partition and the standard VFAT partition are visible and mount normally. But Windows 8.1 prompts to reformat the drive when it's inserted. I'm not surprised if Win 8 hides the EFI partition, but I didn't expect it to prompt for reformatting. I want to leave existing partitions alone, but have a VFAT partition that Windows 7, 8, and 8.1 will mount and display normally. Exactly how does Win 8 decide if a device needs to be formatted?

  Read the article

• Why my USB mouse get suspended after 3 seconds of inactivity?

  - by Vi.

  Mouse's bottom LED goes off after 3 seconds after connection and cursor movements and wheel stops. Pressing any button, reconnecting or resetting USB device resumes it for another 3 seconds (when resumed by pressing button, this event does no go to X). This happens when using any of USB ports. This mouse works well with other computer with Linux. It was working well before. Why can it happen? How to fix it? Update: It happens only if laptop is on battery. Answer: this is caused by powersaving done by laptop-mode-tools. To temporary turn off powersaving one can use for i in /sys/bus/usb/devices/*/power/control; do echo on > $i; done

  Read the article

• Unable to read DVD on laptop

  - by usabilitest

  I have a DVD disk that I created on an HP laptop. I believe it was setup to be accessed as a USB device. I do not have that laptop any longer and I still would like to access the files on that DVD from my current DELL laptop but it can not open the disk. My guess, the session nwas not closed on the disk and for some reason the new laptop can not read it. My question is, is there any way I can access the files using new laptop, of do I need to find similar HP to try to access the files and possibly close the session? Are there any utilities out there that could help me? Thanks.

  Read the article

• How to get audio driver for compaq c700 ?

  - by Leena

  Hi, Initially i have audio driver and its works fine.But some times speaker was clear.So one of my friend installed some audio driver,after that totally disabled the volume. For that reason, i also tried to get audio driver and installed many times.Now i don't know many drivers .inf in my laptop.from device manager i have deleted the audio driver's,below i have attached the screen shot yours kind reference. Please help me to get audio drivers.First, i need to remove the unwanted drivers .inf files from laptop then i have to install the new audio driver. Experts,please suggest me to get audio driver without reinstall the OS. Details: Compaq c700 (i don't know model number) windows xp sp2 p/n : KT188PA#ACJ I appreciate your help.

  Read the article

• How to get audio driver for compaq c700 ?

  - by Leena

  Hi, Initially i have audio driver and its works fine.But some times speaker was clear.So one of my friend installed some audio driver,after that totally disabled the volume. For that reason, i also tried to get audio driver and installed many times.Now i don't know many drivers .inf in my laptop.from device manager i have deleted the audio driver's,below i have attached the screen shot yours kind reference. Please help me to get audio drivers.First, i need to remove the unwanted drivers .inf files from laptop then i have to install the new audio driver. Experts,please suggest me to get audio driver without reinstall the OS. Details: Compaq c700 (i don't know model number) windows xp sp2 p/n : KT188PA#ACJ I appreciate your help.

  Read the article

• Download resume support blocked by isp?

  - by John Doe

  Can ISP block resume support for downloads ? I'm using IDM (internet download manager) to download of the internet from resume supported websites, yet I am unable to resume downloads. I tried different computers with the same result. Turned off firewall, didn't have any effect i was able to download with no issues until a couple of days ago. Another thing i noticed is that before IDM used to try to connect to several connections to speed up my download, but now it can only connect to one connection. Also i tried to download using my vpn, and i was able to download and resume downloads with no problem.

  Read the article

• Windows 8 will only recognize the Blu Ray ROM, if the install disk is present at boot time [migrated]

  - by aceinthehole

  If I have the install disk in the blu ray ROM drive at boot time and subsequently remove the disk and replace it with blu ray media everything functions as I'd expect. However, if I have no media present, or another disk in the drive at boot time, then windows 8 does not seem to recognize that the blu ray player is even present in the computer. It is not present in the 'my computer' screen, device manager does not show the player, and scanning for new hardware yields nothing. It seems that the driver is installed and working as expect, what is it about having the windows 8 install disk in the drive or not that would cause this kind of behavior?

  Read the article

• DIagnosing another Windows 7 Lockup

  - by MSEoris

  Im running windows 7 on a fairly modern machine (8gb ram, amd fx-6100, gtx 560ti) and I notice that periodically my windows seems to just hang for a little while. Frequently this occurs after a cold boot and i start up five or six small to medium sized programs, but also occasionally it occurs during normal usage. Basically what occurs is the screen locks up, there is no keyboard responsiveness for a period of 30 seconds to a full minute - after a bit of patience, control is returned, but I'm interested in figuring out what is causing such lockups. I checked the event log and dont see any issues, and all i can see in task manager is a spike in cpu and memory usage right after this occurs. Any tips on how to even begin to diagnose this? Thanks.

  Read the article

• nm-applet and nmcli don't work in arch

  - by user1780765

  I installed arch linux about two weeks ago. But I still can't use Network Manager. When I use nm-applet command, I get this error: https://gist.github.com/4129816 And when I use nmcli con command, I get this: https://gist.github.com/4129837 sudo doesn't help me neither. D-Bus look fine, I can use dbus-monitor. I installed gnome, but I still can't use NM. I 'm using openbox now. I have another problem too: what should do so I can use nm-connection-editor with non-root users?

  Read the article

• SMTP 25 blocked externally

  - by Jeff

  not sure how to title this question... we run an exchange server with around 80 internal users, all outgoing mail is relayed off a smart host (ISP smtp server) so nothing is actually sent to the world via our server. i wanted to check the server, locally i can telnet to port 25 with no issues and receive the esmtp service ready reply. whenever i do it from an external address (off our local network) i receive unable to connect error 10060. can this cause problems with SPF records, and reverse DNS ? should my exchange server be able to accept smtp requests, requiring authentication before i am able to send from external addresses? if so how... also the exchange server is behind a NAT (asa) device, more than likely thinking that the nat is not configured to route the smtp 25 request to the exchange server.. thanks

  Read the article

• Windows 7 - all usb devices go to sleep im idle mode

  - by dvdx

  A strange thing happened after a few updates to the system: Intel rapid storage SSD firmware update Intel Ethernet adapter update GPU Intel update When the computer turns off the screen (after 5 min), an unknown time later, all the USB devices stop working. Sound card Mouse Keybord etc. I can't turn them back on, so I can't wake up the screen or do anything except turn the computer off and back on. I checked my power save profile and all is OK there. I changed in the Device Manager, the Allow USB to sleep in all the hubs. How can I fix this??

  Read the article

• php-cgi.exe process on IIS

  - by HYP

  The production server runs a PHP application on IIS 6.0. During the peak hours we have had a few issues where the php-cgi.exe processes increase in numbers and approach around 200. The server comes to a crawl and we have to restart the server a multiple times to restore the normal behavior. When the server is running normally, I have noticed that there are only 10-15 php-cgi.exe processes in the task manager. What could be causing the php-cgi.exe processes to increase in number from 10-15 to around 200 during the peak hours? Where should I look for a cause?

  Read the article

• How to configure linux routing/filtering to send packets out one interface, over a bridge and into another interface on the same box

  - by rj75

  I'm trying to test a ethernet bridging device. I have multiple ethernet ports on a linux box. I would like to send packets out one interface, say eth0 with IP 192.168.1.1, to another interface, say eth1 with IP 192.168.1.2, on the same subnet. I realize that normally you don't configure two interfaces on the same subnet, and if you do the kernel routes directly to each interface, rather than over the wire. How can I override this behavior, so that traffic to 192.168.1.2 goes out the 192.168.1.1 interface, and visa-versa? Thanks in advance!

  Read the article

• I don't have a free PCI / PCI-e slot, can it be worked around?

  - by Borek

  I need to add a PCI(e) card to a nettop PC that is so small that the card won't fit there (and there is no external alternative like we're used to with external TV tuners). The only ports available are USB and eSATA, is it possible to somehow "dock" the PCI card into some device that would then connect to the PC via USB or eSATA? Or am I out of luck? (I don't mind the solution being visually ugly, I wouldn't even mind opening up the case and soldering some wires in, anything that would work would be great.)

  Read the article

• Timing startup processes?

  - by acidzombie24

  My Windows 7 use to boot up fast and now its getting rather slow. I suspect one program is eating up all the time yet i cant tell what it is since task manager shows <40% of the cpu being used. What can i use to track how long each process takes when my computer boots/starts up? Note: Except for launchy which i used before my comp became slow, all my startup and services are all signed and known (broadcom, VMWare, Google Inc, Intel, etc) Note2: I am mostly considering the time it takes after i login but i suspect the time before that is slightly slower (i dont think very much though)

  Read the article

• Gigabit connection between 2 computers

  - by Alecu

  I am trying to set up a connection between 2 pc's. It's a direct cable connection. The problem that I am having is that the connection isn't gigabit. I know both network cards support gigabit. I checked in the device settings and in one pc I can see in the Speed & Duplex the 1Gbps option but on the other pc I can't see that option despite the fact that the network card is gigabit. I have quite some files to copy from one pc onto another and I really need a good connection between them. I can't really remove the hard drive because it would void the warranty. Could this be a driver issue or a cable issue? On both pc's I have windows 8. The network card on the pc that doesn't have the 1 gbps option is an Atheros ar8161 card.

  Read the article

• Installing WebDeploy Service

  - by TheBlueSky

  I'm stuggling with installing WebDeploy service on my development PC (Windows 7 Professional with IIS 7.5). Can someone give me the steps required to do that. Update: I installed the Web Deployment Tool from WPI and verified that the web deployment service is running (I believe it's "Web Deployment Agent Service"), however, when I open IIS Manager I can't see the Management Service; as per my understanding it's were I configure web deployment. If I'm missing something may be someone can tell me what it is and what to do next. Thanks in advance, TheBlueSky

  Read the article

• Windows Server 2003 R2 SIS Groveler start error

  - by 2040techman

  Hi I have a Windows Server 2003 R2 SP2 running and I need to have a WDS with mixed mode so I can deploy Windows 7 & Windows XP images. I went to setup the first image and after the wizard was done copying the correct files I got: Single Instance Storage Groveler: Service did not start (or something like that). I checked event viewer and got this: Event Type: Error Event Source: Service Control Manager Event Category: None Event ID: 7023 Date: 3/26/2012 Time: 7:03:21 PM User: N/A Computer: SERVER2 Description: The Single Instance Storage Groveler service terminated with the following error: The service has not been started. This server is needed very soon because we just got a shipment of several Windows XP capable laptops and need to deploy Windows XP over PXE and this is keeping us from proceeding. Any help is great!!!

  Read the article

• Acer Aspire 7750-6801 windows 7 Home Premium x64 not charging properly [closed]

  - by MaurerPower

  I have an Acer Aspire 7750-6801 laptop running Windows 7 Home Premium 64 bit OS. The issue is that it will only charge sometimes when plugged in. I thought it might be a hardware issue, so I tried charging with the laptop off, and it works fine. Also when in Linux, or any other environment other than Windows, it also charges fine. The intermittent charging issue ONLY presents itself when in Windows. I've tried the following: Open Device Manager Under 'Batteries->', I uninstalled 'Microsoft ACPI-Compliant Control Method Battery' Then re-installed using 'Scan for hardware changes' Still no luck. It's quite urgent, any help would be appreciated as I am totally at a loss...

  Read the article

< Previous Page | 503 504 505 506 507 508 509 510 511 512 513 514  | Next Page >