Search Results

Search found 14501 results on 581 pages for 'pierre julien bringer 2008'.

Page 508/581 | < Previous Page | 504 505 506 507 508 509 510 511 512 513 514 515  | Next Page >

• System x3550 M2 stuck on system initializing after firmware upgrades

  - by itmanager223

  Hey guys so i have been having this major issue for the last few hours now. I have a system x 3550M2 server and i ran the UEFI and IMM firmware upgrades within windows server 2008 R2 x64. All upgrades went fine and i was told to reboot. I performed the reboot cleanly using the OS restart option. Upon restarting it showed the system initializing screen and it stayed there for a good hour. After that hour i figured it froze and so i powered down and power up again. Now i can not boot back up to even see the IBM splash screen or the OS... I have tried switching the Jumpers to go to the backup UEFI and backup IMM and no luck. I have also reset the CMOS power and i have pressed the reset button 3 times on the light path and no luck. There are no lights light on the light path to indicate anything is broken. The only thing i see on the light path is the number 0.5. Any ideas guys i am quite stumped with this problem. Thanks a lot, Dani Cela

  Read the article

• Win 7 Remote Desktop connection failure when already logged in.

  - by Andy E

  I have a bit of a strange problem, magnified recently by my broadband dropouts. I wasn't sure whether to post this on SU or SF, so I thought I'd start here as more users would be likely to know what the problem is. In short, when I try and connect to my server (Windows Server 2008) from my laptop running Windows 7, I can only connect if my remote account was previously logged out. If I'm still logged in I get the error message: Windows cannot connect to the remote server. No explanation or anything. If my IP address is the same, I don't have this problem. If I boot up Windows XP Mode and run XP's remote desktop connection it works just fine -- I think the difference there is it takes me to the remote server's logon screen. With Win 7 RDC you never see the logon screen, it asks you for credentials before entering full screen mode. The real problem is that I'm having random broadband dropouts and my IP isn't static. If I logon via Win XP RDC, log out and then run Win 7 RDC then it works fine. I realize I can just use Win XP's RDC for now, but I don't really like keeping XP Mode open if I can help it. Does anyone know a way around this problem? Maybe forcing Win 7 RDC to go to the logon screen, or changing some server-side settings to work around the IP address issue?

  Read the article

• Active Directory FRS problems. 13508 error and other problems

  - by user59232

  I have 3 Domain Controllers. We will call them DC1, DC2 and DC3. DC3 and DC2 show Event ID 13508 in their FRS logs with no follow-up event(13509 I think) to say the error had been fixed. DC1's FRS log no matter what you do never shows any events besides FRS service stopped and started. DC1 holds the SYSVOL that needs to be replicated to the other DC's. The other DC's sysvol folders are empty. I have tried the burflag method of fixing this but I haven't had any luck. My procedure for that was to stop all FRS services on all DC's. Then set the burflag on DC1 to D4 and the other two DCs burflag to D2. Started FRS on DC1 and the only event's I see in DC1's FRS event logs are service stopped and service started messages. This fact is leading me to believe that something is wrong on FRS for DC1. I believe there should be events 13553 and 13516 in the FRS event logs after an authoritative sysvol restore. The other two DC's do not have anything in their SYSVOL, otherwise I would have made one of them the authoritative sysvol. DC1 is MS Server 2003 Enterprise Edition SP2 DC2 is MS Server 2003 Standard Edition SP1 DC3 is MS Server 2003 R2 Standard Edition SP2 I did not setup this domain originally but I am now the administrator of it, so I don't have a lot of background on why certain things may have been done in the past. My main goal is to try and fix these issues to get myself better prepared to decommision DC1 and add a DC running Server 2008 to my domain. Thanks.

  Read the article

• Hyper-V and attaching physical disks

  - by Mike Christiansen

  So, I'm looking at rebuilding my home server. My current setup is the following Windows 7 Ultimate 1TB Boot Drive (my smallest drive) Windows Dynamic Spanned volume, continaing 1x 1TB drive, 2x 2TB drives, totalling 5TB. I am upgrading to a hardware RAID controller, and I would like to run Hyper-V server core. However, I want to retain the ability to join my "file server" to a homegroup, so I must use Windows 7. I know VHDs can only be like 127GB or something, so I obviously need to directly connect disks to my Windows 7 machine. Here is my plan: Server Core 2008 R2 (Hyper-V) 1TB Boot Drive (storing VHDs for boot drives of VMs) - possibly in a RAID 1 with my other 1TB drive 5x 2TB drives (1x 2TB drive hot spare), totalling 10TB, directly attached to a Windows 7 VM, for use of homegroup for this array. In the past, I directly attached the windows dynamic volume to a Windows 7 VM, and performance was abysmal. The question is, with hardware RAID, will it really make that much of a difference? Server specs: Intel Core 2 Quad Q9550 2.83GHz Asus Maximus II Formula (PCI-E x16) 8GB DDR2 RAM PC2-6400 (Yes, I know its a bit out of date)

  Read the article

• Handling emails on a web server - Making sure the FQDN is set correctly based on the website sending the email

  - by webnoob

  I have a Windows 2008 Web Edition server hosting multiple websites using IIS 7.5. At the moment, all the emails are sent via the IIS6 SMTP service. The FQDN of the SMTP service is set to the computer name at the moment which isn't correct as it doesn't resolve to a valid DNS entry and is not RFC compliant. Some questions: Is there any way I can change the FQDN of the SMTP service based on the site sending the email? Would it be Ok to just setup mailserver.mydomain.com and use that as the FQDN for all the sites on multiple domains. Should I be using some other mail server software to handle this better? The reason I am asking is lots of emails are hitting spam folders because the settings are incorrect. I have access to the code that is running the websites so if something needs to be done there then that shouldn't be a problem. The sites are written using ASP.NET 2.0. EDIT: I have just found an option to create an SMTP virtual service. Would this be the way forward? Create a virtual server for each site? Thanks.

  Read the article

• Libvirt/KVM in NAT: can't access from host (and can't forward)

  - by SharkWipf

  I'm trying to set up a port forward to a KVM guest, managed through Libvirt on Debian 6. The VM is running in NAT, through the "default" network. This all runs fine, the VM has full internet connection. However, the host cannot reach the vm internally. Neither ping, nc nor nmap on the NAT network give any signs of the VM. Due to this, the normal iptables forwarding rules don't work either. $ cat /etc/debian_version 6.0.5 $ libvirtd --version libvirtd (libvirt) 0.9.11.3 $ kvm --version QEMU emulator version 1.0 (qemu-kvm-1.0+dfsg-11, Debian), Copyright (c) 2003-2008 Fabrice Bellard ifconfig: eth0 Link encap:Ethernet HWaddr 54:04:a6:f1:6f:10 inet addr:x.x.x.x Bcast:x.x.x.x Mask:255.255.255.x inet6 addr: fe80::5604:a6ff:fef1:6f10/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:118902 errors:0 dropped:0 overruns:0 frame:0 TX packets:142357 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:13247173 (12.6 MiB) TX bytes:95163190 (90.7 MiB) Interrupt:28 Base address:0xe000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:230646 errors:0 dropped:0 overruns:0 frame:0 TX packets:230646 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:204577107 (195.0 MiB) TX bytes:204577107 (195.0 MiB) virbr0 Link encap:Ethernet HWaddr fe:54:00:e2:d2:60 inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5050 errors:0 dropped:0 overruns:0 frame:0 TX packets:961 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:666759 (651.1 KiB) TX bytes:400701 (391.3 KiB) vnet0 Link encap:Ethernet HWaddr fe:54:00:e2:d2:60 inet6 addr: fe80::fc54:ff:fee2:d260/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5050 errors:0 dropped:0 overruns:0 frame:0 TX packets:125687 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:739803 (722.4 KiB) TX bytes:6886609 (6.5 MiB)

  Read the article

• Optimizing Apache for large file serving

  - by D_Guy13

  I have a random problem with Apache that I can't quite figure out, here is my setup, Windows Server 2008 R2, 64 Bit, 5GB RAM, SSD with 200 MB(Read/write) and Dual Core CPU @ 2.1 GHz A dump from mod-staus, Server Version: Apache/2.4.7 (Win32) mod_limitipconn/0.24 mod_antiloris/0.5.2 PHP/5.5.9 Server MPM: WinNT Apache Lounge VC11 Server Built: Nov 21 2013 20:13:01 Current Time: Thursday, 21-Aug-2014 23:38:06 W. Europe Daylight Time Restart Time: Thursday, 21-Aug-2014 20:30:47 W. Europe Daylight Time Parent Server Config. Generation: 1 Parent Server MPM Generation: 1 Server uptime: 3 hours 7 minutes 18 seconds Server load: -1.00 -1.00 -1.00 Total accesses: 283025 - Total Traffic: 1172.2 GB 25.2 requests/sec - 106.8 MB/second - 4.2 MB/request 62 requests currently being processed, 388 idle workers Serving large .zip & iso files using mod_xsendfile. (File size range 500 MB - 1.5 GB) The setup works and is running fine. CPU usage is very unstable, jumps all the time between 10% - 90% and the servers goes down when it hits 100%. In that case I have to hard restart the server. Server it outputting traffic at 30 Mbps. Is there anything else I should think about to get a more stable CPU usage? Is that CPU usage normal? Can switching to Linux help me achieve better CPU usage?

  Read the article

• Client cannot access my IIS7 web server

  - by Soccerwiz

  I have a Windows 2008 web server on running IIS 7 with about 25 websites. One of those sites is an SaaS application that is accessed constantly throughout the day. However, one particular client keeps getting blocked from my server. They will be using the service, and then all of a sudden they cannot access the program, or any other site on the server. The entire office of 4 users is blocked from accessing anything on the web server. A trace route reveals they get all the way to the server before they are blocked. However, they can access a linux server that is a different VM with a different IP on the same physical server. Also, when they are blocked from their office, they can still access the site from their mobile phone or local Starbucks. They can also occasionally reset the router and gain access to the web server again as they are on a dynamic IP address. I checked IIS and allow all IPs to access the server. There is nothing in the logs the says anything about a user being banned. I really have no idea what is causing this? Could it be a virus on their end? I have even moved the SaaS to a completely new server in a different location, and they were working fine for about a month, and then the problem started occurring again. Are there any hidden blacklists in IIS? Or is it a routing issue on their end?

  Read the article

• Pulling application updates from closest server?

  - by Mike Morris

  Setup: 6 Major Sites with Server 2003/2008 DCs doing DHCP/AD Integrated DNS, each on their own subnet. All connect back to datacenter through a 3 mbps WAN ERP server running in the datacenter, accessed by clients at all sites Currently, when we update the software, I manually push a copy of the updated client/config files down to each DC. I have a script that we run on each PC to update the clients. It determines what subnet the PC is on, and pulls the software from that DC. It's messy, but it works. The client has an autoupdate feature, but it'll only pull from the application server (which is housed in the datacenter, over the 3 meg link). It takes forever, since the updates are not "patches" but a full version of the client, even for minor upgrades (bad design). After the most recent patch, you can configure the clients to pull from a different server. Unfortunately, it is the same for all clients. Is there some kind of DNS magic I can use to pull from the local server? For instance, if I tell the clients their update server is ERPUPDATE, can I have their local DNS server return a different IP for ERPUPDATE than the other sites? Example: Client 1 is at site A, client 2 is at site b. They each run the software and a version change is detected. As per the config files, the clients look to ERPUPDATE for their updated client. Client 1 queries DNS for the IP of ERPUPDATE at its current location (site A) DNS at site A returns 192.1.1.5 Client 1 pulls update from 192.1.1.5 Client 2 queries DNS for the IP of ERPUPDATE at its current location (site B) DNS at site B returns 192.1.2.5 Client 2 pulls update from 192.1.2.5 Excuse the poor explanation, I worked 61 hours over the weekend and haven't completely rebounded. I'll be happy to clarify if needed!

  Read the article

• One workstation gets slow access to the server, but others are fast

  - by Mike Hanson

  I've just setup a machine with Windows Server 2008. It hosts various services, like IIS, POP3, SMTP, Music for Squeezeboxes, VNC. All was working well for the first week or so. One day I needed to create a mapped drive on the server, so it could access files on my workstation. Windows indicated that Network Discovery was needed, so I turned it on with the "Home / Office" option (rather than "Public"). This may be coincidence, but since that time I've been having troubles accessing various services from my main workstation (running Windows 7/64): POP3 continued working correctly, but SMTP was delayed or failed entirely. (Telnet took 20 seconds to connect, but Outlook would never send messages.) VNC failed entirely. I reinstalled it on the server, and now it works but feels sluggish. The music web server was extremely delayed and usually failed. I tried reinstalling, and now it takes about 30 seconds to show the page name on the browser tab, and another 30 seconds to display any page contents. Other machines on the local network seem fine, as do machines connected via the Internet. I don't believe I changed anything on my own machine that would cause this. I considered the possibility that my anti-virus was involved, so I uninstalled AVG (commercial version), but that didn't help. I installed Norton 360 after that, and it didn't complain of viruses on my machine, and the delays remained. Because only my machine is affect, I'm tempted to blame it, except that reinstalling software on the server improved the situation, so there is almost certainly something going on with the server too. The firewall has all the necessary ports open, and it works fine for the other workstations (including external machines connected via the Internet), which indicates that it should be OK. Any ideas?

  Read the article

• Hyper-V and attaching physical disks [migrated]

  - by Mike Christiansen

  So, I'm looking at rebuilding my home server. My current setup is the following Windows 7 Ultimate 1TB Boot Drive (my smallest drive) Windows Dynamic Spanned volume, continaing 1x 1TB drive, 2x 2TB drives, totalling 5TB. I am upgrading to a hardware RAID controller, and I would like to run Hyper-V server core. However, I want to retain the ability to join my "file server" to a homegroup, so I must use Windows 7. I know VHDs can only be like 127GB or something, so I obviously need to directly connect disks to my Windows 7 machine. Here is my plan: Server Core 2008 R2 (Hyper-V) 1TB Boot Drive (storing VHDs for boot drives of VMs) - possibly in a RAID 1 with my other 1TB drive 5x 2TB drives (1x 2TB drive hot spare), totalling 10TB, directly attached to a Windows 7 VM, for use of homegroup for this array. In the past, I directly attached the windows dynamic volume to a Windows 7 VM, and performance was abysmal. The question is, with hardware RAID, will it really make that much of a difference? Server specs: Intel Core 2 Quad Q9550 2.83GHz Asus Maximus II Formula (PCI-E x16) 8GB DDR2 RAM PC2-6400 (Yes, I know its a bit out of date)

  Read the article

• Hard Disk based storage library

  - by Ryan M.

  We have a Tandberg T24 tape device to handle all of our long term backups right now. We decided that we're not backing up nearly everything that we would like to and that we still have a lot of vulnerabilities. To get to where we want to be, we're going to have to back up a lot more servers than we're currently doing. All of our internal servers have some sort of directly attached drive (I.e. LaCie Raid box or a simple portable hard drive) doing backups, but what we want to do is get those backups off-site. The current tape drive is directly attached via SCSI to a Windows Server 2008 File Server. So to back up anything to tape, it has to be funneled through the File Server. With the current increase that we have planned, I don't think that funneling everything through the File Server is the right course of action and I'm thinking that maybe a second backup device would be more appropriate. I would like your input on a couple of ideas. 1) Doing HDD instead of tape. Tape is hard to deal with. We have a regular rotation cycle, so they don't need years and years of shelf life, so I'm wondering if something HDD-based would be better. 2) Something accessible over the network. Instead of having the device directly attached to one specific machine, have it available to all the servers over the network. Our File Server is a 12-disk raid 6 set up.. I was thinking something like that, but with no raid involved, all disks are stand alone so they can be used/installed/removed on an individual basis. Does any such thing exist? Thanks for your ideas. I'm really interested to hear about some of the solutions you guys are using..

  Read the article

• Expanding iSCSI LUNs (NTFS)

  - by Fatih

  I have a 4TB iSCSI LUN that formated as NTFS in Windows 2008. I've shared this formated volume as a folder over SMB. When the capacity of this volume is not enough, I have to add more iSCSI LUNs, but the end-users must see only the folder that I've shared before. So, when I expand the NTFS volume that is currently 4TB, with more iSCSI LUNS(for example 2 more 4TB LUN), if one of the luns is failed, or missing, will all of my data in the folder be lost? I imagine that the expanding ntfs volume is like RAID 0(striped). if it is like RAID 0, then all my data will be lost when one of the luns is failed, or missing. In brief, there are two questions in here: 1- What will be happened, if one of the luns is missing in an expanded ntfs volume? 2- Is there another way to merge all of iscsi luns as only a folder, in that way the users don't see any extra folder even if I add extra iscsi luns to the file server.(I don't mention about DFS) Regards.

  Read the article

• Is the Windows VPN secure?

  - by Tor Haugen

  I have used a few VPN solutions over the years. Most are hard to set up, slow to connect and/or rather ill-behaved (replacing system drivers, disrupting each other etc). One solution I have never used earlier is the one built into Windows. This is mostly because the infrastructure guys always refuse to use it because they claim it's 'not secure'. Now I have finally had the chance to use it (on Windows 7), and wow, it's a breeze! Easy to set up, well-behaved, it connects almost instantly, automatically authenticates with my logged-in credentials, and integrates excellently with the UI. I have to say, unless it really isn't secure, I'll be happy if I never have to use another VPN product ever again. I gather the Windows VPN used to rely on PPTP, which is not considered secure. But in Windows 7/2008, it supports L2TP/IPSec, SSTP and IKEv2, and authenticates with EAP or CHAP/CHAPv2. That seems pretty up-to-date to me. But I'm just a lowly developer. Can someone in the know give me the lowdown on this?

  Read the article

• How can I rapidly switch hosts?

  - by EAMann

  I'm in the process of migrating a forum setup from one version of the software on one machine (older shared Windows host) to a new VPS (Windows Server 2008). To install the software, I used my hosts file to temporarily point the domain at the new IP address. To see the old site, I obviously re-edit the hosts file to remove the reference. But this leaves me constantly adding/removing a # from my hosts file just so I can switch back and forth between the two servers. Is there a way to do this more rapidly? I've found a handful of toggling batch scripts, but all they do is automate the addition/removal of the # character ... so there's still a noticeable lag where I have to repeatedly hit F5 to force my system to detect the new settings. Ideally, I could view both servers at the same time on the same machine. Maybe one through a regular browser session and one through some kind of a proxy. Unfortunately, I don't have the first idea how to set that up. Ideas?

  Read the article

• Hyper-V vss-writer not making current copies [migrated]

  - by Martinnj

  I'm using diskshadow to backup live Hyper-V machines on a Windows 2008 server. The backup consists of 3 scripts, the first will create the shadow copies and expose them, the second uses robocopy to copy them to a remote location and the third unexposes the shadow copies again. The first script – the one that runs correctly but fails to do what it's supposed to: # DiskShadow script file to backup VM from a Hyper-V host # First, delete any shadow copies of the drives. System Drives needs to be included. Delete Shadows volume C: Delete Shadows volume D: Delete Shadows volume E: #Ensure that shadow copies will persist after DiskShadow has run set context persistent # make sure the path already exists set verbose on begin backup add volume D: alias VirtualDisk add volume C: alias SystemDrive # verify the "Microsoft Hyper-V VSS Writer" writer will be included in the snapshot # NOTE: The writer GUID is exclusive for this install/machine, must be changed on other machines! writer verify {66841cd4-6ded-4f4b-8f17-fd23f8ddc3de} create end backup # Backup is exposed as drive X: make sure your drive letter X is not in use Expose %VirtualDisk% X: Exit The next is just a robocopy and then an unexpose. Now, when I run the above script, I get no errors from it, except that the "BITS" writer has been excluded because none of its components are included. That's okay because I really only need the Hyper-V writer. Also I double checked the GUID for the writer, it's correct. During the time when the Hyper-V writer becomes active, 2 things will happen on the guest machines: The Debian/Linux machine will go to a saved state and restore when done, all fine. The Windows guests will "creating vss snapshop-sets" or something similar. Then X: gets exposed and I can copy the .vhd files over. The problem is, for some reason, the VHD files I get over seems to be old copies, they miss files, users and updates that are on the actual machines. I also tried putting the machines in a saved sate manually, didn't change the outcome. I hope someone here has an idea of how to solve this.

  Read the article

• Server format & Reinstall while keeping Server & domain ID

  - by Chris

  Hi Everyone, I want to reinstall my 2008 R2 server from scratch, due to multiple Active Dir issues. I have only 1 server running AD and a spare machine to use if necessary. Is there a way to save just the user accounts and the domain SID, so that I can start with a clean server that uses the same name as before? I can reassign file security, but I do not want to have to rejoin all the users to a new domain. Also all users are mapped to folders on the server. What I hope to do is a clean install of the server without having to mess with the users machines. can someone please tell me the procedure to accomplish this? any help appreciated! Thanks guys, but I could be here all day telling you every error I am getting. can we please keep this to the question of how to do a reinstall and keep the same SID? I just want to start over without having to rejoin all the clients to a new domain. Is there such a tool that can backup the Server SID and the AD domain name so that I could restore them, without restoring any other data? I might not be using the correct terminology here, but hopefully you understand what I am asking. Thanks

  Read the article

• php-cgi.exe Taking out server, multiple running

  - by Alex

  I have been using ZendServer CE for over a year and have never had a problem. Recently, about a week or two ago I have found my server to be acting up and even causing RDP to be un-connectable. After some looking around I have 20, 25, 30+ php-cgi.exe running. With my IIS7 service starting with Windows once my server started all these php-cgi.exe would start running (even though the limit is 10) and I could not even connect to it. After disabling the Web Server as startup which stops php-cgi.exe from running the server runs flawless, like it always has. As soon as I run the web server all these odd issues start. I have a post over at Zend http://forums.zend.com/viewtopic.php?f=44&t=41043&p=95133 where I was told to update my Zend install. After doing so this issue has not gone away. Even running 1 php-cgi.exe (somehow 2 start anyway) the server begins to go silly. The first issue I find myself with running php-cgi.exe is that Windows Services, weather be stock or using FireDaemon begin to lag, slow start, crash, etc. If anyone can help me with this I would GREATLY appreciate it. At this time I am forced to look for a alternative to running PHP other than cgi as it simply takes out the whole box. On another note, I run this same version of Zend on a similar server with no issues. Starting to think its a IIS issue. (UPDATE) Installed newest version of PHP, separate from Zend, same issue. Server Specs: Intel Xeon Quad w HT Nehlam Based 24GB DDR3 1333 2x1TB Raid Mirror OS 2x1TB Raid Mirror (Other) 4x2TB Raid 5 (Storage) Server 2008 R2

  Read the article

• Emails sent from Coldfusion using the same SMTP/Exchange server works from one machine but fails for another

  - by Peter Herdenborg

  First, apologies if this question is too vague or has too little information to really be answerable. I am not normally working with these issues, and I don't have full access to the environment. However, the hosting provider seems to have a hard time tracking down the issue, so I am hoping that someone can at least provide me with some qualified guesses about the most likely problem. Here goes: A client I work for has a hosted IT environment, based on virtual machines running Windows 2008 R2 Standard. Our website, based on Coldfusion 9 was recently migrated from one virtual machine to another, and though Coldfusion is configured in the exact same way, using the same SMTP server, i.e. the client's Exchange server hosted in the same environment and in the same AD as both web servers, sending emails to external recipients is no longer working. It is still working fine when testing from the old machine. This is what I've learnt so far (all emails are sent using a valid from-address on the client's domain): Emails sent to other recipients on the same domain are delivered without any problem. Emails sent to external recipients on other domains are never delivered. When sending emails to both internal and external recipients, no emails are delivered. When receiving one of these emails to an internal address, the sender is now indicated as "[email protected]", while when sent from the old machine, it used to say just "sender". This seems to me that it could hint that the Exchange machine "recognizes" the old web server while it is a stranger to the new. In Coldfusion's mail log, all messages appear to be successfully delivered to the SMTP server. Any ideas what settings to look at, what log entries to search for or how to compare the old web server with the new one will be highly appreciated.

  Read the article

• What is the name of the this DOS font? Where and how to add it? Why is there a 1 pixel gap?

  - by JBeurer

  So basically I somehow stepped into this webpage: www.braindamage.vg And the first thing that hit me hard was the lovely DOS fonts, so naturally I wanted to get them into my IDE badly. Opened the html source file and CSS file to find the font name: @font-face { font-family: 'Perfect DOS VGA 437'; src: url('http://www.braindamage.vg/wp-content/themes/braindamage/dosfont.eot'); } @font-face { font-family: 'Perfect DOS VGA 437'; src: url('http://www.braindamage.vg/wp-content/themes/braindamage/dosfont.svg#dos') format("svg"), url('http://www.braindamage.vg/wp-content/themes/braindamage/dosfont.ttf') format ('truetype'); } So I download the font, add it using Control Panel - Fonts. But once I start using it (notepad, MSVS 2008 & MSVS2010) I notice that it looks slightly off: It seems like there's 1 extra pixel between each character. How it should look: What is causing it and how to fix this? Is it the windows XP? (i have disabled font smoothing) Or is there something wrong with the font file?

  Read the article

• Does Xenapp require Windows Terminal Services (Remote Desktop) licenses?

  - by John Virgolino

  We have a Xenapp 5.x server running for over a year now. It does not have any purchased Terminal Services (Remote Desktop) licenses installed. It is running on a Windows 2008 Server box. I am aware that Terminal Services runs fine for about 3 months and then supposedly stops issuing licenses. On occasion, Xenapp stops working and we see lots of License errors in the event log, although not necessarily every time. In most cases, a reboot or 2 resolves the problem. We figured it was because of the lack of TS licenses. I spoke with Citrix and they said we had to have the licenses, but it begs the question that if we have to have the licenses, how does it work the majority of the time without them!!?? I have not received a straight answer yet and before I tell my client to shell out more money, I need to understand the technical reasoning for how this is actually working if we are breaking the rules here. We will buy the licenses if necessary, but there has to be an explanation for this. I am hoping the community can help where Citrix apparently cannot. Thanks much!

  Read the article

• SQL Server Replication Backup

  - by user18039

  Hi We have a new system that runs on SQL Server 2008 r2 64-bit. There is a primary on-line transactional processing (OLTP) database that accepts a high volume of updates from several thousand Point of Sale systems at stores around the country. In order to protect this vital function, I have decided to introduce a dedicated reporting database server - from which multiple users will run some pretty complex reports. I realise that there were a number of choices but I decided to use Transaction Replication as the mechanism for copying the data from the OLTP database to the new reporting database - one way replication. The solution has worked well in test. I'm now being asked what changes need to be made to the backup policy to cover the architectural changes. I have read pages such as MSDN:Strategies for Backing Up and Restoring Snapshot and Transactional Replication but I think these are overkill for my solution. In fact, my current thinking is that we simply need to continue making backups of the OLTP data and logs. If the Reporting db or any of the system replication (eg distribution) databases fail then it's no big deal - we can clear all down then re-create the replication. I realise that taking a complete snapshot of the OLTP would be time consuming (approx 5 hours) but I'd be more relaxed about this that trying to restore backups of the various data and log files in the correct sequence. My view is that the complex strategies set out in the MSDN article would only be the way to go for a more complex replication solution than I have, eg if there were multiple subscribers with 2-way replication. Would you agree? I'd be grateful for any advice. Many thanks, Rob.,

  Read the article

• IIS7ASP.Net 4.0 - 404 errors only for external clients

  - by dmcgiv

  recently we moved an ASP.Net 3.5 website to 4.0 (integrated mode) and when we deployed to the clients server (Windows Server 2008 Web edition) we notice that some .aspx pages are serving 404 errors. What is strange is that 1) the pages exist 2) if you browse from the server itself the page is served as normal, only external clients get the 404 3) it's the default 404 error page not the one configured in the web.config 4) it only happens for some .aspx pages, and I've not been able to establish a link between the pages that are not being served externally. We are using a URL rewriter module which I first thought may be at fault but then realised that only some of the failing pages are being rewritten. I've also tested removing the http module and the problem still persists. As everything is working as expected when logged onto the server I was thinking it my be some sort of permission issue, but why would it only affect a few pages? I turned on failed request tracking and the debug files are being generated with the expected 404 error, although at the moment I'm not sure what most of the data means so can't decipher what's going on internally. I'd really appreciate some help with this one.

  Read the article

• Copied a file with winscp; only winscp can see it

  - by nilbus

  I recently copied a 25.5GB file from another machine using WinSCP. I copied it to C:\beth.tar.gz, and WinSCP can still see the file. However no other app (including Explorer) can see the file. What might cause this, and how can I fix it? The details that might or might not matter WinSCP shows the size of the file (C:\beth.tar.gz) correctly as 27,460,124,080 bytes, which matches the filesize on the remote host Neither explorer, cmd (command line prompt w/ dir C:\), the 7Zip archive program, nor any other File Open dialog can see the beth.tar.gz file under C:\ I have configured Explorer to show hidden files I can move the file to other directories using WinSCP If I try to move the file to Users/, UAC prompts me for administrative rights, which I grant, and I get this error: Could not find this item The item is no longer located in C:\ When I try to transfer the file back to the remote host in a new directory, the transfer starts successfully and transfers data The transfer had about 30 minutes remaining when I left it for the night The morning after the file transfer, I was greeted with a message saying that the connection to the server had been lost. I don't think this is relevant, since I did not tell it to disconnect after the file was done transferring, and it likely disconnected after the file transfer finished. I'm using an old version of WinSCP - v4.1.8 from 2008 I can view the file properties in WinSCP: Type of file: 7zip (.gz) Location: C:\ Attributes: none (Ready-only, Hidden, Archive, or Ready for indexing) Security: SYSTEM, my user, and Administrators group have full permissions - everything other than "special permissions" is checked under Allow for all 3 users/groups (my user, Administrators, SYSTEM) What's going on?!

  Read the article

• Application Screen Repainting Issues

  - by Jeff Sheldon

  I have this issue lately at work. It drives be nuts, and I finally stopped to ask this question. It's quite often that an application I've been running just randomly fails to repaint itself for a while, usually in the editor screen. I most often see this occurring with Expression Web, Visual Studio 2008/2010 and SQL Server Management studio. These applications are what I work in the most, so I'm not surprised to mostly see it here. But I was curious if anyone else had a solution for this. I've tried: Reboots. The screen shot below is about 10 minutes after a reboot. New Video Drivers. This machine is running a Nvidia Quadro NVS 290 video card with the latest drivers. Closing other applications, this is the only thing running right now. As far as hardware, this machine has Dual Quad-Core Xeon 2.83ghz Processors, with 10 gigs of memory, running Windows XP SP3 64bit. Any help would be great. JNK EDIT: Per comments from deleted (wrong) answer: I'm running dual monitors. Set it to single display, still occurred. Rebooted, and tried it again, and it still occurred. Switched it back to dual screen. My resolution is only 1400x900 on each.

  Read the article

< Previous Page | 504 505 506 507 508 509 510 511 512 513 514 515  | Next Page >