Search Results

Search found 17583 results on 704 pages for 'query analyzer'.

Page 508/704 | < Previous Page | 504 505 506 507 508 509 510 511 512 513 514 515  | Next Page >

  • Can a Windows 2003 Active Directory server act as a NTP server?

    - by Rob Nicholson
    Within our LAN, there are two Windows 2003 servers with the Active Directory role. Both these servers have the time service configured to query NTP servers on the internet for the accurate time. That works fine. I've just installed XenServer v5.6 and it's asked me for the IP address of an NTP server. Without tweaking the firewall, I cannot configure this server to reference an internet based NTP server. But can I configure it to use the IP address of the internal AD servers, i.e. do AD servers also act as NTP servers to other computers? Thanks, Rob.

    Read the article

  • Cannot ping router with a static IP assigned?

    - by Uriah
    Alright. I am running Ubuntu LTS 12.04 and am trying to configure a local caching/master DNS server so I am using Bind9. First, here are some things via default DHCP: /etc/network/interfaces cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet dhcp # The primary network interface - STATIC #auto eth0 #iface eth0 inet static # address 192.168.2.113 # netmask 255.255.255.0 # network 192.168.2.0 # broadcast 192.168.2.255 # gateway 192.168.2.1 # dns-search uclemmer.net # dns-nameservers 192.168.2.113 8.8.8.8 /etc/resolv.conf cat /etc/resolv.conf # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN nameserver 192.168.2.1 search uclemmer.net ifconfig ifconfig eth0 Link encap:Ethernet HWaddr 00:14:2a:82:d4:9e inet addr:192.168.2.103 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::214:2aff:fe82:d49e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1067 errors:0 dropped:0 overruns:0 frame:0 TX packets:2504 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:153833 (153.8 KB) TX bytes:214129 (214.1 KB) Interrupt:23 Base address:0x8800 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:915 errors:0 dropped:0 overruns:0 frame:0 TX packets:915 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:71643 (71.6 KB) TX bytes:71643 (71.6 KB) ping ping -c 4 192.168.2.1 PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data. 64 bytes from 192.168.2.1: icmp_req=1 ttl=64 time=0.368 ms 64 bytes from 192.168.2.1: icmp_req=2 ttl=64 time=0.224 ms 64 bytes from 192.168.2.1: icmp_req=3 ttl=64 time=0.216 ms 64 bytes from 192.168.2.1: icmp_req=4 ttl=64 time=0.237 ms --- 192.168.2.1 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 2997ms rtt min/avg/max/mdev = 0.216/0.261/0.368/0.063 ms ping -c 4 google.com PING google.com (74.125.134.102) 56(84) bytes of data. 64 bytes from www.google-analytics.com (74.125.134.102): icmp_req=1 ttl=48 time=15.1 ms 64 bytes from www.google-analytics.com (74.125.134.102): icmp_req=2 ttl=48 time=11.4 ms 64 bytes from www.google-analytics.com (74.125.134.102): icmp_req=3 ttl=48 time=11.6 ms 64 bytes from www.google-analytics.com (74.125.134.102): icmp_req=4 ttl=48 time=11.5 ms --- google.com ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3003ms rtt min/avg/max/mdev = 11.488/12.465/15.118/1.537 ms ip route ip route default via 192.168.2.1 dev eth0 metric 100 192.168.2.0/24 dev eth0 proto kernel scope link src 192.168.2.103 As you can see, with DHCP everything seems to work fine. Now, here are things with static IP: /etc/network/interfaces cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface #auto eth0 #iface eth0 inet dhcp # The primary network interface - STATIC auto eth0 iface eth0 inet static address 192.168.2.113 netmask 255.255.255.0 network 192.168.2.0 broadcast 192.168.2.255 gateway 192.168.2.1 dns-search uclemmer.net dns-nameservers 192.168.2.1 8.8.8.8 I have tried dns-nameservers in various combos of *.2.1, *.2.113, and other reliable, public nameservers. /etc/resolv.conf cat /etc/resolv.conf # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN nameserver 192.168.2.1 nameserver 8.8.8.8 search uclemmer.net Obviously, when I change the nameservers in the /etc/network/interfaces file, the nameservers change here too. ifconfig ifconfig eth0 Link encap:Ethernet HWaddr 00:14:2a:82:d4:9e inet addr:192.168.2.113 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::214:2aff:fe82:d49e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1707 errors:0 dropped:0 overruns:0 frame:0 TX packets:2906 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:226230 (226.2 KB) TX bytes:263497 (263.4 KB) Interrupt:23 Base address:0x8800 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:985 errors:0 dropped:0 overruns:0 frame:0 TX packets:985 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:78625 (78.6 KB) TX bytes:78625 (78.6 KB) ping ping -c 4 192.168.2.1 PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data. --- 192.168.2.1 ping statistics --- 4 packets transmitted, 0 received, 100% packet loss, time 3023ms ping -c 4 google.com ping: unknown host google.com Lastly, here are my bind zone files: /etc/bind/named.conf.options cat /etc/bind/named.conf.options options { directory "/etc/bind"; // // // query-source address * port 53; notify-source * port 53; transfer-source * port 53; // If there is a firewall between you and nameservers you want // to talk to, you may need to fix the firewall to allow multiple // ports to talk. See http://www.kb.cert.org/vuls/id/800113 // If your ISP provided one or more IP addresses for stable // nameservers, you probably want to use them as forwarders. // Uncomment the following block, and insert the addresses replacing // the all-0's placeholder. // forwarders { // 0.0.0.0; // }; forwarders { // My local 192.168.2.113; // Comcast 75.75.75.75; 75.75.76.76; // Google 8.8.8.8; 8.8.4.4; // DNSAdvantage 156.154.70.1; 156.154.71.1; // OpenDNS 208.67.222.222; 208.67.220.220; // Norton 198.153.192.1; 198.153.194.1; // Verizon 4.2.2.1; 4.2.2.2; 4.2.2.3; 4.2.2.4; 4.2.2.5; 4.2.2.6; // Scrubit 67.138.54.100; 207.255.209.66; }; // // // //allow-query { localhost; 192.168.2.0/24; }; //allow-transfer { localhost; 192.168.2.113; }; //also-notify { 192.168.2.113; }; //allow-recursion { localhost; 192.168.2.0/24; }; //======================================================================== // If BIND logs error messages about the root key being expired, // you will need to update your keys. See https://www.isc.org/bind-keys //======================================================================== dnssec-validation auto; auth-nxdomain no; # conform to RFC1035 listen-on-v6 { any; }; }; /etc/bind/named.conf.local cat /etc/bind/named.conf.local // // Do any local configuration here // // Consider adding the 1918 zones here, if they are not used in your // organization //include "/etc/bind/zones.rfc1918"; zone "example.com" { type master; file "/etc/bind/zones/db.example.com"; }; zone "2.168.192.in-addr.arpa" { type master; file "/etc/bind/zones/db.2.168.192.in-addr.arpa"; /etc/bind/zones/db.example.com cat /etc/bind/zones/db.example.com ; ; BIND data file for example.com interface ; $TTL 604800 @ IN SOA yossarian.example.com. root.example.com. ( 1343171970 ; Serial 604800 ; Refresh 86400 ; Retry 2419200 ; Expire 604800 ) ; Negative Cache TTL ; @ IN NS yossarian.example.com. @ IN A 192.168.2.113 @ IN AAAA ::1 @ IN MX 10 yossarian.example.com. ; yossarian IN A 192.168.2.113 router IN A 192.168.2.1 printer IN A 192.168.2.200 ; ns01 IN CNAME yossarian.example.com. www IN CNAME yossarian.example.com. ftp IN CNAME yossarian.example.com. ldap IN CNAME yossarian.example.com. mail IN CNAME yossarian.example.com. /etc/bind/zones/db.2.168.192.in-addr.arpa cat /etc/bind/zones/db.2.168.192.in-addr.arpa ; ; BIND reverse data file for 2.168.192.in-addr interface ; $TTL 604800 @ IN SOA yossarian.example.com. root.example.com. ( 1343171970 ; Serial 604800 ; Refresh 86400 ; Retry 2419200 ; Expire 604800 ) ; Negative Cache TTL ; @ IN NS yossarian.example.com. @ IN A 255.255.255.0 ; 113 IN PTR yossarian.example.com. 1 IN PTR router.example.com. 200 IN PTR printer.example.com. ip route ip route default via 192.168.2.1 dev eth0 metric 100 192.168.2.0/24 dev eth0 proto kernel scope link src 192.168.2.113 I can SSH in to the machine locally at *.2.113 or at whatever address is dynamically assigned when in DHCP "mode". *2.113 is in my router's range and I have ports open and forwarding to the server. Pinging is enabled on the router too. I briefly had a static configuration working but it died after the first reboot. Please let me know what other info you might need. I am beyond frustrated/baffled.

    Read the article

  • CodePlex Daily Summary for Tuesday, October 16, 2012

    CodePlex Daily Summary for Tuesday, October 16, 2012Popular ReleasesMagelia WebStore Open-source Ecommerce software: Magelia WebStore 2.1: Scheduler Import & Export feature UTC datetime and timezone support .net 4.5 and Visual Studio 2012 migration client magelia global refactoring nugget package https://nuget.org/packages/Magelia.Webstore.Client/2.1.254.1 burst optimisation burst time improvment (multithreading, index, ...) current burst is still active when a new burst is generating bugfixes version 2.1.254.1DevLib: 70038 binary dlls: 70038 binary dllsP1 Port monitoring with Netduino Plus: V0.2 Beta Netduino Plus P1 Port Monitoring: This is the stable beta release of the Netduino Plus P1 port monitoring. Please read the requirements on the Documentation page.JayData - The cross-platform HTML5 data-management library for JavaScript: JayData 1.2.2: JayData is a unified data access library for JavaScript to CRUD + Query data from different sources like OData, MongoDB, WebSQL, SqLite, HTML5 localStorage, Facebook or YQL. The library can be integrated with Knockout.js or Sencha Touch 2 and can be used on Node.js as well. See it in action in this 6 minutes video Sencha Touch 2 example app using JayData: Netflix browser. What's new in JayData 1.2.2 For detailed release notes check the release notes. Revitalized IndexedDB providerNow you c...VFPX: FoxcodePlus: FoxcodePlus - Visual Studio like extensions to Visual FoxPro IntelliSense.Droid Explorer: Droid Explorer 0.8.8.8 Beta: fixed the icon for packages on the desktop fixed the install dialog closing right when it starts removed the link to "set up the sdk for me" as this is no longer supported. fixed bug where the device selection dialog would show, even if there was only one device connected. fixed toolbar from having "gap" between other toolbar removed main menu items that do not have any menus Iveely Search Engine: Iveely Search Engine (0.3.0): Iveely Search Engine?????????????,0.3.0????????,????????:??????。 ????????????"????“????????,????????????。??0.3.0???????????0.3.0????????,????。 ?????,????????????????,??????300????,?????????300?????????????????,?????????????????。????,??????????,???????,???????。???????IveelySE.Resource,???????????,???????????????????????,???????????。 ????????Iveely.config,??????IveelySE.Run.Task.exe,?????????http://127.0.0.1:8088/query=yourkeyword,??????。 ????,??? ??http://www.cnblogs.com/liufanping...Fiskalizacija za developere: FiskalizacijaDev 1.0: Prva verzija ovog projekta, još je uvijek oznacena kao BETA - ovo znaci da su naša testiranja prošla uspješno :) No, kako mi ne proizvodimo neki software za blagajne, tako sve ovo nije niti isprobano u "realnim" uvjetima - svaka je sugestija, primjedba ili prijava bug-a je dobrodošla. Za sve ovo koristite, molimo, Discussions ili Issue Tracker. U ovom trenutku runtime binary je raspoloživ kao Any CPU za .NET verzije 2.0. Javite ukoliko trebaju i verzije buildane za 32-bit/64-bit kao i za .N...Squiggle - A free open source LAN Messenger: Squiggle 3.2 (Development): NOTE: This is development release and not recommended for production use. This release is mainly for enabling extensibility and interoperability with other platforms. Support for plugins Support for extensions Communication layer and protocol is platform independent (ZeroMQ, ProtocolBuffers) Bug fixes New /invite command Edit the sent message Disable update check NOTE: This is development release and not recommended for production use.AcDown????? - AcDown Downloader Framework: AcDown????? v4.2: ??●AcDown??????????、??、??、???????。????,????,?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。 ●??????AcPlay?????,??????、????????????????。 ● AcDown??????????????????,????????????????????????????。 ● AcDown???????C#??,????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7/8 ???? 32??64? ???Linux ????(1)????????Windows XP???,????????.NET Framework 2.0???(x86),?????"?????????"??? (2)???????????Linux???,????????Mono?? ??2...PHPExcel: PHPExcel 1.7.8: See Change Log for details of the new features and bugfixes included in this release, and methods that are now deprecated. Note changes to the PDF Writer: tcPDF is no longer bundled with PHPExcel, but should be installed separately if you wish to use that 3rd-Party library with PHPExcel. Alternatively, you can choose to use mPDF or DomPDF as PDF Rendering libraries instead: PHPExcel now provides a configurable wrapper allowing you a choice of PDF renderer. See the documentation, or the PDF s...DirectX Tool Kit: October 12, 2012: October 12, 2012 Added PrimitiveBatch for drawing user primitives Debug object names for all D3D resources (for PIX and debug layer leak reporting)Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.70: Fixed issue described in discussion #399087: variable references within case values weren't getting resolved.GoogleMap Control: GoogleMap Control 6.1: Some important bug fixes and couple of new features were added. There are no major changes to the sample website. Source code could be downloaded from the Source Code section selecting branch release-6.1. Thus just builds of GoogleMap Control are issued here in this release. Update 14.Oct.2012 - Client side access fixed NuGet Package GoogleMap Control 6.1 NuGet Package FeaturesBounds property to provide ability to create a map by center and bounds as well; Setting in markup <artem:Goog...mojoPortal: 2.3.9.3: see release notes on mojoportal.com http://www.mojoportal.com/mojoportal-2393-released Note that we have separate deployment packages for .NET 3.5 and .NET 4.0, but we recommend you to use .NET 4, we will probably drop support for .NET 3.5 once .NET 4.5 is available The deployment package downloads on this page are pre-compiled and ready for production deployment, they contain no C# source code and are not intended for use in Visual Studio. To download the source code see getting the lates...D3 Loot Tracker: 1.5.4: Fixed a bug where the server ip was not logged properly in the stats file.Captcha MVC: Captcha Mvc 2.1.2: v 2.1.2: Fixed problem with serialization. Made all classes from a namespace Jetbrains.Annotaions as the internal. Added autocomplete attribute and autocorrect attribute for captcha input element. Minor changes. Updated: I'm added an example for this question. v 2.1.1: Fixed problem with serialization. Minor changes. v 2.1: Added support for storing captcha in the session or cookie. See the updated example. Updated example. Minor changes. v 2.0.1: Added support for a partial ...DotNetNuke® Community Edition CMS: 06.02.04: Major Highlights Fixed issue where the module printing function was only visible to administrators Fixed issue where pane level skinning was being assigned to a default container for any content pane Fixed issue when using password aging and FB / Google authentication Fixed issue that was causing the DateEditControl to not load the assigned value Fixed issue that stopped additional profile properties to be displayed in the member directory after modifying the template Fixed er...Database View-plug-ins Programming Helper: Database View-plug-ins 1.3: V1.3 added feature: Metadata Deployment. The download package consists of deployment SQL scripts. Run every scripts of all subdirectories in order (sort by name). "VPI" is the default schema name in the manifest, it can be changed to other name according to your enterprise database policy. Current release is for Oracle version (SQL Server version will be released later).Advanced DataGridView with Excel-like auto filter: 1.0.0.0: ?????? ??????New ProjectsAerTHe: Simple, test project about EntityFramework, NUnit, etc.BalanceManagerApp: BalanceManagerAppC++ Debugger Visualizers for VS2012: C++ Debugger Visualizers for Boost, wxWidgets, TinyXML, TinyXML2ClipReader: A Text-To-Speach reader that reads from the clipboard. Reads any text you copy to the clipboard. Similar idea to ReadPlease. Coursework 2.0 UGC Site: University of Hertfordshire coursework project to develop a Web 2.0-style UGC website. DavesinitialcourseworkcalculatorinVS: Basic calculator for assignment 1DL_Assignment 1: This project forms Task 1 of Assignment 1 for 7COM0207. The requirement is that a user can enter 2 numbers and the sum of the numbes is displayed. Document Storage: This project is intended to act as a learning exercise for the participants. gillsassignment1: This is task 1 for assignment 1 which adds 2 numbers and displays the result.gillstestproject: This is my first little test.Iconator for Microsoft Dynamics CRM 2011: This application ease the customization of custom entities icons in Microsoft Dynamics CRM 2011.Infopath 2010 Web Signature Capture: A simple method of adding signature capture to InfoPath Browser enabled forms. KennyWorld: Kenny's blog based on BLogEngine.netMirus - Advanced Open Source Operating System: Mirus is a new, advanced, open source operating system written in C# using the Cosmos toolkit aiming for POSIX compatibility, ease of use, and innovation.Morgado Finance: Test of Finance ManagementMPF for Projects - Visual Studio 2012: A community project containing the source code and tests of a library for creating project system plug-ins for Visual Studio 2012 using C#.OpenWeb: OpenWeb project by Deigo Stefanon [*/*P1 Port monitoring with Netduino Plus: This program reads the Dutch electricity meter P1 port messages and publishes the information to Cosm and ThingSpeak for monitoring.Powerless View: Proof of concept application for hosting the Power View Silverlight application outside of a SharePoint and Reporting Services environment.RAM Drive: A Windows Service that copies an existing Virtual Hard Disk in memory, then mounts it as a disk giving the ability to use your RAM as a super-fast drive.Roderick Vella's Interactive Learning: Web Scripting and Content CreationSaveDouban: ?????????????????,????.NetFramework3.5?????ScriptEase for Microsoft Dynamics CRM 2011: Utility to synchronize your Microsoft Dynamics CRM 2011 JavaScripts with your files on your local hard-drive.T.REST: T.REST - a framework for testing REST ressourcesVisual Leak Detector Performance Test: Tests for Visual Leak Detector for Visual C++ 2008/2010/2012 [url:http://vld.codeplex.com/]???????: ????????????????。?????????????。 ??url??,??????

    Read the article

  • Difference between two kinds of Bing URL Referers

    - by joshuahedlund
    Most of the referral URLS that I get from Bing have the following syntax: http://www.bing.com/search?q=keywords+keywords&[some other variables] However I just noticed that maybe 10-20% of them are coming in like this: http://www.bing.com/url?source=search&[some other variables]&url=http%3A%2F%2Fwww.example.com/user-landing-page-on-my-site&yrktarget=_top&q=keywords+keywords&[some other variables] The first syntax gives me the keywords the user typed in, but the second actually gives me the keywords the user typed in and their landing page on my site. I was originally unaware of this second kind altogether because I have a customized referral report that filters out URLs containing my domain. But now that I noticed them I want to know why they occur to see if I can get more to occur this way because the second syntax contains more valuable information. If I go to one of the first URLs, it gives me a typical Bing query page. The second URLs seem to just redirect me to the Bing home page. I'm not sure if it has to do with the kind of search being performed (I also get a few http://www.bing.com/shopping/search?q= referers) or some other metric. Does anyone know what causes some referral URLs from Bing to have the /search?q syntax and others to have the /url?source syntax? P.S. I have verified that I am getting both kinds of URLs from non-advertising clicks. P.P.S. I am not talking about data in Google Analytics or similar software but the raw $_SERVER['HTTP_REFERER'] value coming from the client's original request.

    Read the article

  • How should I deal with user agent parsing in logs?

    - by Mr. Jefferson
    My web app project includes logging functionality so we can see where visitors are coming from (referrer URL), what the popular user agents are, what pages are most popular, etc. The log is stored in SQL Server, and when I query the user agents I use a large (almost 100 lines) and growing CASE statement to separate the user agents using string matching (i.e. if the user agent contains the string "Firefox/9" then it's Firefox 9). Is there a better way to do this so I don't have to continually add to that CASE statement to deal with new browser releases? Also, how should I deal with less common, weird/unknown user agents? I've seen the following in the logs and been unable to find good information online about what they are: WordPress/3.3.1; http://www.facecolony.org Mozilla/4.0 ( http://www.hairirons.org redips; <a href=http://hairirons.org/>chi hair iron</a>) I'd guess they're bots/crawlers, but the sites they point to don't appear to reference web crawlers (or even be available sometimes). I've seen other user agents aren't familiar to me, but I know they're bots because they include "bot" or "spider" or something similar in them.

    Read the article

  • sp_help

    - by David-Betteridge
    One of the nice things about SQL Server Management Studio (SSMS) is that you can highlight a table name in a script and press Alt + F1 to perform sp_help on it. Unfortunately I've never been able to use that feature as the majority of the tables in our product belong to a schema other than dbo.    On a long train journey back to York I wondered if I could solve this problem by writing my own replacement for sp_help (which I’ve called sp_help_table_schemas).  My version works by first checking the system tables to find out which schemas the table belongs to SELECT s.Name   --Find the schema FROM sys.schemas s  JOIN sys.tables t on t.schema_id = s.schema_id  WHERE t.name = 'Orders'It then dynamically calls the standard sp_help method but this time supplying the table owner as well.SET @cmd = 'EXEC sp_help ''' + QUOTENAME(@SchemaName) + '.' + QUOTENAME(@ObjectName) + ''' ;' ;           EXEC ( @cmd )Once I had proved the basics worked I wrapped it up into a stored procedure and deployed it to the master database on my laptop.  It was then just a question of going into Tools à Options within SSMS and defining the keyboard short cutA couple of notes You can’t amend the existing Alt+F1 entry to I went with Ctrl+F1.  You need to open new query window for the change to be picked upSo I can now highlight a table name and press Ctrl+F1 The completed script is attached.   Thanks go to Martin Bell who reviewed my stored procedure and give some valuable advice.

    Read the article

  • Be aware of the difference between CURRENT_DATE and SYSDATE

    - by Kevin Smith
    I was running some queries in SQL Developer against the WebCenter Content (WCC) schema that included date fields such as dInDate. I was comparing the dates against CURRENT_DATE. I was not getting the expected results. I did some googlng and didn’t find a solution, but I did run across a reference to SYSDATE. I tried SYSDATE in my queries and got the expected results. I did a TO_CHAR on the two date fields and found they returned different times. CURRENT_DATE returned the time from my laptop which was  in the EDT time zone. SYSDATE returned the time from the database server which happened to be in the PDT time zone. I guess if both the database server and my laptop were in the same time zone I would not have seen any problem. Here is the query I ran to display the two fields. select to_char(current_date,'DD-MON-YY HH:MI:SS'), to_char(sysdate,'DD-MON-YY HH:MI:SS') from dual; As you can see from the screen shot from SQL Developer they definitely returned different times. I’m sure there is some command or setting you can use to prevent this problem, but for me the take away is to use SYSDATE in your queries when you want to do any date comparison.

    Read the article

  • How is this modsec rule getting triggered?

    - by BipedalShark
    I made a GET request to the URL, http://domain.tld/test/docs/index.php?create_table=1&step=2 and got a 403 response code. It turns out this modsec rule is getting triggered: Access denied with code 403 (phase 2). Pattern match "(?:ogg|gopher|zlib|(?:ht|f)tps?)\:/" at ARGS:gltr_redir. [file "/opt/mod_security/10_asl_rules.conf"] [line "827"] [id "340153"] [rev "22"] [msg "Generic PHP code injection protection via ARGS 3"] [severity "CRITICAL"] I would assume ARGS refers to GET/POST data, but there's no gltr_redir in the query string. And, being a GET request, there's obviously no POST data. So how is this rule being triggered?

    Read the article

  • Computer to Tv cable question

    - by Keith D
    Hi all. Heres my query : I have a PC with all the usual outputs and a couple of TVs in the house with inputs to connect to a computer. Now, what i would like to do is get rid of cable TV and using the input into the spliters in the basement,( ie. where the input cable from outside actually feeds the system ) have the computer become the "Cable supplier" ( so to speak ) and have the output ( via some sort of box ) from the computer, convert what is on my monitor into an RF signal that is then fed into the cables in my house and ultimately to each TV / room . I don't know if there is such an item but would welcome any thoughts you might have on such a set up. I am not into HD or the like, so the picture quality needs only to be watchable, not HD. I don't want to have to set up seperate cables to feed the audio on each TV. Thanks in advance!

    Read the article

  • How do I install Postgres Graphical Installer?

    - by Tusar Das
    I am a newbie in using Ubuntu (more precisely never used linux except the production deployment ). Now I choose to hold a grip on the system and intalled a latest 11.10 Ubuntu in my 32 bit Intel** desktop. In this machine **I have a 'administrator' user 'tusar'. I want to install the PostgreSQL graphical version so downloaded this file postgresql-8.4.9-1-linux.bin from here Now If run the file with ./filename command (refuses if I am not root), it opens up the graphical interface and completes the installation (creates user postgres and ask for password, wont complete if I dont give valid password). I checked with /etc/inint.d/postgresql-8.4 status , that postgres is running. But the problem is I am unable to open the GUI (I installed it in /opt/Postgresql ), its telling permission denied even if I am logged in as 'tusar'. Then I tried using the su postgres command and it directly changed the user without password. Now if I run the psql , createdb , its prompting me to install the postgres-client-package but this utilies are already installed and I can view them in my /opt/Postgresql/8.4/bin folder. I can run query through my JDBC utility programs but unable to use neither terminal nor the graphical interface (although I can see pgAdmin3 is there ). Urgent help needed. I have used this guide for the installation.

    Read the article

  • Have you used nDepend?

    - by Nick Harrison
    Have you Used NDepend? I have often wanted to use it, but never spent the money on it.   I have developed many tools that try to do pieces of what NDepend does, but never with as much success as they reach. Put simply, it is a tool that will allow you to udnerstand and monitor the architecture of your software, and it does it in some pretty amazing ways. One of the most impressive features is something that they call Code Query Language.   It allows you to write queries very similar to SQL to track the performance of various software metrics and use this to identify areas that are out of compliance with your standards and architecture. For instance, once you have analyzed your project, you can write queries such as : SELECT METHODS WHERE IsPublic AND CouldBePrivate  You can also set up such queries to provide warnings if there are records returned.    You can incorporae this into your daily build and compare build against build. There are over 82 metrics included to allow you to view your code in a variety of angles. I have often advocated for a "Code Inventory" database to track the state of software and the ROI on software investments.    This tool alone will take you about 90% of the way there. If you are not using it yet,  I strongly recommend that you do!

    Read the article

  • Multiple sites with the same codebase in Python

    - by Jimmy
    I am trying to run a large amount of sites which share about 90% of their code. They are simply designed to query an API and return the results. They will have a common userbase / database but will be configured slightly different and will have different CSS (perhaps even different templating). My initial idea was to run them as separate applications with a common library but I have read about the sites framework which would allow them to run from a single instance of Django which may help to reduce memory usage. https://docs.djangoproject.com/en/dev/ref/contrib/sites/ Is the site framework the right approach to a problem like this, and does it have real benefits over running separate applications? Initially I thought it was, but now I think otherwise. I have heard the following: Your SITE_ID is set in settings.py, so in order to have multiple sites, you need multiple settings.py configurations, which means multiple distinct processes/instances. You can of course share the code base between them, but each site will need a dedicated worker / WSGIDaemon to serve the site. This effectively removes any benefit of running multiple sites under one hood, if each site needs a UWSGI instance running. Alternative ideas of systems: https://github.com/iivvoo/django_layers https://github.com/shestera/django-multisite I don't know what route to be taking with this.

    Read the article

  • 14540059 - UPDATE FOR BI PUBLISHER ENTERPRISE 11.1.1.6.0 AUGUST

    - by Tim Dexter
    Its been a while, I know :( I have posts in the pipe just gotta smoke em out! The latest update for BIP 11.1.1.6 was released last week. A bunch of defects have been addressed as you can see below.  13473493 - XMLP TRANSLATION ISSUE OF MILLION (ENG) TO MILLIONES (SPANISH) 13521951 - BIP UPGRADE FROM 10G TO 11.1.1.5.0 IS NOT SUCCESSFULL FOR TIAA-CREF  12542914 - ACC: REPORT VIEWER STRUCTURE HAS ERRORS - NO IFRAME AND NO LANG ATTRIBUTE  13562801 - XML TAG DISPLAY SHOULD DEFAULT TO 'FOLLOW THE DATA 13568043 - BIP QUERY FAILING VALIDATION DUE TO 'COALESCE' KEYWORD 13592901 - THE REPORT IS THROWING AN SQL ERROR THAT REFERENCES CHECKING FOR NULL VALUES 13836696 - BI PUBLISHER REPORT NOT GENERATED WHEN A TEXT FIELD START WITH "E.<SPACE>"  13879206 - DM MIGRATION ISSUES 13888939 - DM: LOV SEARCH CAUSING DB CONNECTION LEAK 13904225 - XSLX ERROR DUE TO URL LINK AND USE OF LIST 13930795 - RTF TEMPLATE GIVING DIFFERENT RESULTS IN DIFFERENT  13942064 - XDOEXCEPTION THROWN WHEN RUNNING PEOPLESOFT TEMPLATES AND XML FILE 13981523 - BI PUBLISHER ON 64-BIT WINDOWS CAN'T CONNECT TO MS ANALYSIS SERVICES CUBE 14039229 - BIP 11.1.1.5.0 REPORTS ARE NOT WORKING ON BIP 11.1.1.6.0  14055793 - BIP 11.1.1.6.0: DATE TYPE INPUT PARAMTER IS NOT DISPLAYING THE CORRECT VALUE USI  14059851 - UNABLE TO GRANT PRIVILEGES TO ROLE: DOMAIN USERS; THE ROLE DOES NOT EXIST 14109967 - LARGE OUTPUT CAUSES OUT OF MEMORY DUE TO LEFT OVER DEBUG CODE 14163973 - ISSUES USING DATA MODEL EDITOR IN BIP 11.1.1.6  14167915 - ORG.XML.SAX.SAXEXCEPTION: DATE FORMAT CANNOT BE NULL  14240045 - EDITING SCHEDULED REPORTS DOES NOT REFLECT VALID VALUES FOR UPGRADED SCHEDULES 14304427 - SEARCH DIALOG NOT BINDING PARAMETER VALUE - INVALID PARAMETER BINDING(S). 14338158 - PASSWORD FIELD SHOULD NOT BE DISPLAYED FOR FMW SECURITY MODEL 14393825 - OBIEE11G: LARGE NUMBER OF OBIPS SESSIONS CREATED WHEN USING SSO AND BI PUB 14558377 - CONT. BUG 14240045:EDITING SCHEDULES IN BI PUBLISHER IS DEFAULTING TO 'ALL' This patch is just for BI Publisher standalone installs. For those of you using BIP within the wider BIEE suite there is the 11.1.1.6.2 BP1 patchset. More details on that here.

    Read the article

  • CodePlex Daily Summary for Saturday, June 07, 2014

    CodePlex Daily Summary for Saturday, June 07, 2014Popular ReleasesSFDL.NET: SFDL.NET (2.2.9.3): Changelog: Retry Bugfix (Error Counter wurde nicht korrekt zurückgesetzt) Neue Einstellung: Retry Wartezeit ist nun EinstellbarLoad Runner - HTTP Pressure Test Tool: Load Runner 1.2: 1. added support for distributed load test (read documentation for details) 2. added detail documentationAspose for Apache POI: Aspose.Words vs Apache POI WP - v 1.1: Release contain the Code Comparison for Features in Apache POI WP SDK and Aspose.Words What's New ?Following Examples: Working with Headers Working with Footers Access Ranges in Document Delete Ranges in Document Insert Before and After Ranges Feedback and Suggestions Many more examples are yet to come here. Keep visiting us. Raise your queries and suggest more examples via Aspose Forums or via this social coding site.babelua: 1.5.7.0: V1.5.7.0 - 2014.6.6Stability improvement: use "lua scripts folder" as lua search path when debugging;SEToolbox: SEToolbox 01.033.007 Release 1: Fixed breaking changes in Space Engineers in latest update. Installation of this version will replace older version.Virto Commerce Enterprise Open Source eCommerce Platform (asp.net mvc): Virto Commerce 1.10: Virto Commerce Community Edition version 1.10. To install the SDK package, please refer to SDK getting started documentation To configure source code package, please refer to Source code getting started documentation This release includes bug fixes and improvements (including Commerce Manager localization and https support). More details about this release can be found on our blog at http://blog.virtocommerce.com.NPOI: NPOI 2.1: Assembly Version: 2.1.0 New Features a. XSSFSheet.CopySheet b. Excel2Html for XSSF c. insert picture in word 2007 d. Implement IfError function in formula engine Bug Fixes a. fix conditional formatting issue b. fix ctFont order issue c. fix vertical alignment issue in XSSF d. add IndexedColors to NPOI.SS.UserModel e. fix decimal point issue in non-English culture f. fix SetMargin issue in XSSF g.fix multiple images insert issue in XSSF h.fix rich text style missing issue in XSSF i. fix cell...51Degrees - Device Detection and Redirection: 3.1.2.3: Version 3.1 HighlightsDevice detection algorithm is over 100 times faster. Regular expressions and levenshtein distance calculations are no longer used. The device detection algorithm performance is no longer limited by the number of device combinations contained in the dataset. Two modes of operation are available: Memory – the detection data set is loaded into memory and there is no continuous connection to the source data file. Slower initialisation time but faster detection performanc...CS-Script for Notepad++ (C# intellisense and code execution): Release v1.0.27.0: CodeMap now indicates the type name for all members Implemented running scripts 'as administrator'. Just add '//css_npp asadmin' to the script and run it as usual. 'Prepare script for distribution' now aggregates script dependency assemblies. Various improvements in CodeSnipptet, Autcompletion and MethodInfo interactions with each other. Added printing line number for the entries in CodeMap (subject of configuration value) Improved debugging step indication for classless scripts ...Kartris E-commerce: Kartris v2.6003: Bug fixes: Fixed issue where category could not be saved if parent categories not altered Updated split string function to 500 chars otherwise problems with attribute filtering in PowerPack Improvements: If a user has group pricing below that available through qty discounts, that will show in place of the qty discountClosedXML - The easy way to OpenXML: ClosedXML 0.72.3: 70426e13c415 ClosedXML for .Net 4.0 now uses Open XML SDK 2.5 b9ef53a6654f Merge branch 'master' of https://git01.codeplex.com/forks/vbjay/closedxml 727714e86416 Fix range.Merge(Boolean) for .Net 3.5 eb1ed478e50e Make public range.Merge(Boolean checkIntersects) 6284cf3c3991 More performance improvements when saving.DNN Blog: 06.00.07: Highlights: Enhancement: Option to show management panel on child modules Fix: Changed SPROC and code to ensure the right people are notified of pending comments. (CP-24018) Fix: Fix to have notification actions authentication assume the right module id so these will work from the messaging center (CP-24019) Fix: Fix to issue in categories in a post that will not save when no categories and no tags selectedcsv2xlsx: Source code: Source code of applicationFamily Tree Analyzer: Version 4.0.0.0-beta5: This major release introduces a significant new feature the ability to search the UK Ordnance Survey 50k Gazetteer for small placenames that often don't appear on a modern Google Map. This means significant numbers of locations that were previously not found by Google Geocoding will now be found by using OS Geocoding. In addition I've added support for loading the Scottish 1930 Parish boundary maps, whilst slightly different from the parish boundaries in use in the 1800s that are familiar to...TEncoder: 4.0.0: --4.0.0 -Added: Video downloader -Added: Total progress will be updated more smoothly -Added: MP4Box progress will be shown -Added: A tool to create gif image from video -Added: An option to disable trimming -Added: Audio track option won't be used for mpeg sources as default -Fixed: Subtitle position wasn't used -Fixed: Duration info in the file list wasn't updated after trimming -Updated: FFMpegVeraCrypt: VeraCrypt version 1.0d: Changes between 1.0c and 1.0d (03 June 2014) : Correct issue while creating hidden operating system. Minor fixes (look at git history for more details).Microsoft Web Protection Library: AntiXss Library 4.3.0: Download from nuget or the Microsoft Download Center This issue finally addresses the over zealous behaviour of the HTML Sanitizer which should now function as expected once again. HTML encoding has been changed to safelist a few more characters for webforms compatibility. This will be the last version of AntiXSS that contains a sanitizer. Any new releases will be encoding libraries only. We recommend you explore other sanitizer options, for example AntiSamy https://www.owasp.org/index....ConEmu - Windows console with tabs: ConEmu 140602 [Alpha]: ConEmu - developer build x86 and x64 versions. Written in C++, no additional packages required. Run "ConEmu.exe" or "ConEmu64.exe". Some useful information you may found: http://superuser.com/questions/tagged/conemu http://code.google.com/p/conemu-maximus5/wiki/ConEmuFAQ http://code.google.com/p/conemu-maximus5/wiki/TableOfContents If you want to use ConEmu in portable mode, just create empty "ConEmu.xml" file near to "ConEmu.exe" Tweetinvi a friendly Twitter C# API: Tweetinvi 0.9.3.x: Timelines- Added all the parameters available from the Timeline Endpoints in Tweetinvi. - This is available for HomeTimeline, UserTimeline, MentionsTimeline // Simple query var tweets = Timeline.GetHomeTimeline(); // Create a parameter for queries with specific parameters var timelineParameter = Timeline.CreateHomeTimelineRequestParameter(); timelineParameter.ExcludeReplies = true; timelineParameter.TrimUser = true; var tweets = Timeline.GetHomeTimeline(timelineParameter); Tweetinvi 0.9.3.1...Sandcastle Help File Builder: Help File Builder and Tools v2014.5.31.0: General InformationIMPORTANT: On some systems, the content of the ZIP file is blocked and the installer may fail to run. Before extracting it, right click on the ZIP file, select Properties, and click on the Unblock button if it is present in the lower right corner of the General tab in the properties dialog. This release completes removal of the branding transformations and implements the new VS2013 presentation style that utilizes the new lightweight website format. Several breaking cha...New Projects.NET Extended Framework: .NET Extended FrameworkActivity Diagram: This is an attempt to parse C# Operation source and convert them into UML Activity Diagrams. The development of a suitable diagram editor is the next priorityBango Payment Flow in-app payments: Bango Payment Flow in-app paymentsDeckEditor: ?????????????????????????????????。 ?????????、CSV????、???????????。demodjango: just a demo project to record how to using djangoExport Bugs: This application will export all the bugs in a current project from TFS. It also has the option to export all attachments in the current projectFantom - Expression Based Dynamic Language Manager: Easy Dynamic Language (over MSSQL) Management for Asp.Net Web Forms. Very easy create dynamic multi language Asp.Net web site.JIRAShell: Provides PowerShell cmdlets for working with JIRA.PipeUtil: PipeUtil is a library that simplifies use the feature PIPE windows. Has the capability of client and server with threads support.Post Deployment Smoke Tester: This tool enables you to easily carry out post deployment smoke tests against your installed deployments to determine if your environment is in a good state.Quan Ly Dang Ki Internet: quan ly dang ki internetToolKD: ToolKD console application designed to change the binary code for directories that are used KitchenDraw program. Wiki Parsing Service: A web service to Parse wiki mark-up to HTML and vice versaXBee-API for .NET: This is .NET library for communication with XBee/XBee-Pro series 1 (IEEE 802.15.4) and series 2 (ZB/ZigBee Pro) OEM RF Modules. XPinterest: XPinterestZSoft-CMS: the project is going to use a new approach other than regular modular cms es.

    Read the article

  • Game Resource Generation

    - by Darthg8r
    I am currently building a game that has a "City" entity. These cities generate and consume resources such as food variably over a period of time. I need to be able query the server often to find exactly how much food the city at any given point. These queries can take place multiple times per minute. There could also be 400,000 cities to track at a given time. How would you handle tracking these resources? Would you do it in real time, keeping an instance of the city in memory on the server, with some sort of a snapshot in time of the resources, then computing the growth/consumption from that snapshot time for subsequent queries? Would you work exclusively with a database, using a similar "snapshoting" scheme? Maybe a mixture of the 2, caching recently queried cities in memory for a period of time? There is also a lot of other data that each city needs to track. A player can queue units to build in a barrack. The armies available in the city will need to be updated as units complete. I'm interested in everyone's input on where/when/how you'd manage the real time data.

    Read the article

  • Bahnbrechend und einsatzbereit: Oracle 12c In-Memory-Option Launch in Frankfurt

    - by Anne Manke
    Seit der Ankündigung der Oracle 12c In-Memory-Databankoption in San Francisco auf der Openworld im letzten Jahr, ist die DB Community gespannt, was diese bahnbrechende Technologie für Ad-hoc-Echtzeitanalysen von Live-Transaktionen, Data Warehousing, Reporting und Online Transaction Processing (OLTP) bringen wird. Die Messlatte liegt hoch, denn Larry Ellison verspricht mit der neuen 12c In-Memory-Option eine 100-fach schnellerer Verarbeitung von Abfragen bei Echtzeitanalysen für OLTP Prozesse oder Datawarehouses eine Verdoppelung der Transaktionsverarbeitung eine 100%ige Kompatibilität zu bestehenden Anwendungen Daten werden im Zeilenformat und Spaltenformat (In-Memory) abgelegt, und sind dabei aktiv und konsitstent Cloud-ready ohne Datamigration eine Ausweitung der In-Memory-basierten Abfrageprozesse auf mehrere Server    Um nur einige Features zu nennen >> mehr Infos finden Sie hier! Abfragen werden mit der neuen 12c In-Memory-Datenbankoption schneller bearbeitet, als die Anfrage gestellt werden kann, so Larry Ellison. Am 17. Juni 2014 wird die 12c In-Memory auf einer exklusiven Launch-Veranstaltung in Frankfurt am Main vorgestellt. Auf der Agenda stehen Vorträge, Diskussionen und eine LiveDemo der In-Memory-Datenbankoption.  Melden Sie sich jetzt an! Ort & Zeit: 17. Juni 2014, 9:30 - 15:15 Uhr in Radisson Blu Hotel (Franklinstrasse 65, 60486 Frankfurt am Main) Agenda 9:30 Registrierung 10:00 Begrüßung Guenther Stuerner, Vice President Sales Consulting, Oracle Deutschland (in deutscher Sprache) 10:15 Analystenvortrag Carl W. Olofson, Research Vice President, IDC (in englischer Sprache) 10:35 Keynote Andy Mendelsohn, Head of Database Development, Oracle (in englischer Sprache) 11:35 Podiumsdiskussion (in englischer Sprache): · Jens-Christian Pokolm, Postbank Systems AG · Andy Mendelsohn, Head of Database Development, Oracle · Carl W. Olofson, Research Vice President, IDC · Dr. Dietmar Neugebauer, Vorstandsvorsitzender, DOAG 12:30 Mittagessen 13:45 Oracle Database In Memory Option    Perform – Manage – Live Demo Ralf Durben, Senior Leitender Systemberater, Oracle Deutschland (in deutscher Sprache) 14:30 In Memory – Revolution for your DWH – Real Time Datawarehouse – Mixed Workloads – Live Demo – Live Data Query Alfred Schlaucher, Senior Leitender Systemberater, Oracle Deutschland (in deutscher Sprache) 15:15 Schlusswort & Networking

    Read the article

  • Free DNS software with failover support?

    - by Lin
    I'm looking for DNS software that can accomplish the following: Check health of all A records at set intervals If server is unresponsive after multiple successive checks, replace A record with a working server When a server is down, check it periodically. Once it's up, restore normal A records Here's an equivalent I thought of: Run DNS servers with very low TTL (minutes) Use a cron job to periodically query all webservers Use sed to replace A records if need be, and then restart DNS server I have a hard time believing there isn't already something that can accomplish the above. I'm not looking for a paid service, and I'm restricted to anything I can run with root access to a VPS. Any suggestions would be great. Thanks!

    Read the article

  • A good news for China and Japan developers: Sample Browser is localized to Chinese and Japanese

    - by Jialiang
    Translate this pageArabicBulgarianCatalanChinese SimplifiedChinese TraditionalCzechDanishDutchEstonianFinnishFrenchGermanGreekHaitian CreoleHebrewHindiHmong DawHungarianIndonesianItalianJapaneseKoreanLatvianLithuanianNorwegianPersianPolishPortugueseRomanianRussianSlovakSlovenianSpanishSwedishThaiTurkishUkrainianVietnamese Microsoft® Translator Check out this page in {0} translated from {1}translated fromOriginal:Translated:Automatic translation powered by Microsoft® TranslatorStart translatingStop translatingCloseClose and show original pageSelect The Sample Browser Local Language Support feature is released today!  It is supporting Simplified Chinese and Japanese UI, and is optimized for Chinese and Japanese sample searches.  This should be a good news for China and Japan developers :)  We will add more languages in the near future. Install:  http://aka.ms/samplebrowser If you have already installed the previous version of Sample Browser, you can simply reopen it to get the auto-update. For example, in the Chinese UI, you can directly search samples in Chinese.  The Sample Browser is optimized to surface Chinese samples that match your query first.  This gives China and Japan developers a completely localized experience with code samples!   Particularly thanks to Japan MVPs and Satoru Kitabata – Japan MVP Lead.  Our team leant the strong need of localized Sample Browser from them.  They also devoted much time to translating the UI elements to Japanese, and making it available to Japan developers.

    Read the article

  • smtp sasl authentication failure

    - by cromestant
    hello, I have configured and fixed almost all the problems with my postfix +courier + mysql setup for virtual mailboxes. I can now receive mail and send it from webmail (squirrel). BUT, what I can't do is authenticate from outside client. Since my isp blocks port 25 I setup postfix to work on 1025 for smtp and setup verbose loging. Here is the verbose log of a failed authentication process LOG Authentication for imap and pop3 seem to be working but this one is not. Here is the postconf -n output. Also through mysql I can verify that it is trying to validate through the system, running a query that returns the encrypted password stored in the database. I can't seem to find the error for this. thank you in advance

    Read the article

  • Which databases support parallel processing across multiple servers?

    - by David
    I need a database engine that can utilize multiple servers for processing a single SQL query in parallel. So far I know that this is possible with the some engines, though none of them are feasible for me either because of pricing or missing features. The engines currently known to me are: MS SQL (enterprise) DB2 (enterprise) Oracle (enterprise) GridSQL Greenplum Which other engines have this feature? Do you have any experience with using this feature? Edit: I have now proposed a method for creating one myself. Any input is welcome. Edit: I have found another one: Informix Extended Parallel Server

    Read the article

  • More Tables or More Databases?

    - by BuckWoody
    I got an e-mail from someone that has an interesting situation. He has 15,000 customers, and he asks if he should have a database for their data per customer. Without a LOT more data it’s impossible to say, of course, but there are some general concepts to keep in mind. Whenever you’re segmenting data, it’s all about boundary choices. You have not only boundaries around how big the data will get, but things like how many objects (tables, stored procedures and so on) that will be involved, if there are any cross-sections of data (do they share location or product information) and – very important – what are the security requirements? From the answer to these types of questions, you now have the choice of making multiple tables in a single database, or using multiple databases. A database carries some overhead – it needs a certain amount of memory for locking and so on. But it has a very clean boundary – everything from objects to security can be kept apart. Having multiple users in the same database is possible as well, using things like a Schema. But keeping 15,000 schemas can be challenging as well. My recommendation in complex situations like this is similar to a post on decisions that I did earlier – I lay out the choices on a spreadsheet in rows, and then my requirements at the top in the columns. I  give each choice a number based on how well it meets each requirement. At the end, the highest number wins. And many times it’s a mix – perhaps this person could segment customers into larger regions or districts or products, in a database. Within that database might be multiple schemas for the customers. Of course, he needs to query across all customers, that becomes another requirement. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

    Read the article

  • ClearTrace Supports Statement Level Events

    - by Bill Graziano
    One of the requests I get on a regular basis is to capture the performance of statement level events.  The latest beta has this feature available.  If you’re interested in this I’d like to get some feedback. I handle the SP:StmtCompleted and the SQL:StmtCompleted events.  These report CPU, reads, writes and duration. I’m not in any way saying it’s a good idea to trace these events.  Use with caution as this can make your traces much larger. If there are statement level events in the trace file they will be processed.  However the query screen displays batch level *OR* statement level events.  If it did both we’d be double counting. I don’t have very many traces with statement completed events in them.  That means I only did limited testing of how it parses these events.  It seems to work well so far though.  Your feedback is appreciated. If you ever write loops or cursors in stored procedures you’re going to get huge trace files.  Be warned. I also fixed an annoying bug where ClearTrace would fail and tell you a value had already been added.  This is a result of the collection I use being case-sensitive and SQL Server not being case-sensitive.  I thought I had properly coded around that but finally realized I hadn’t.  It should be fixed now. If you have any questions or problems the ClearTrace support forum is the best place for those.

    Read the article

  • Adding a MySQL StoredProcedure causes not responding state

    - by Omie
    Hello I'm on Windows 7 ultimate 32bit + xampp 1.7.2 [MySQL v5.1.37] This is my stored procedure : delimiter // CREATE PROCEDURE updatePoints(IN parentid INT(5),IN userid INT(5)) DECLARE chpoints INT(5); BEGIN SELECT points INTO chpoints FROM quiz_challenges WHERE id = parentid; UPDATE quiz_users SET points = points + chpoints WHERE forumid=userid; END; // delimiter ; At first it was showing error 1064 while creating stored procedure. I added delimiters part and when I tried running the query from phpmyadmin, Firefox went into not responding state. After that I started Internet Explorer and tried opening my pages which use the same database, it worked fine. However, I tried opening phpmyadmin and IE went into not responding state as well. I restarted both servers. Later restarted PC. Tried again but its same behavior. So whats wrong with this tiny little code ? Am I missing something which might be causing infinite loop ? Thanks

    Read the article

  • How-to create a select one choice listing common time zones

    - by frank.nimphius
    Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} ADF Faces provides an option to query a list of common timezones for display in a Select One Choice component. The EL expression for this is #{af:getCommonTimeZoneSelectItems()}. To use this expression in a Single Select One Choice component, drag and drop the component from the Oracle JDeveloper Component Palette into a JSF page.  In the opened dialog, copy the expression into the Value property below the Bind to list (select items) header. <af:selectOneChoice label="TimeZones" id="soc1">  <f:selectItems value="#{af:getCommonTimeZoneSelectItems()}"                          id="si1"/></af:selectOneChoice>

    Read the article

  • Is it possible to transfer a domain without a "gap" in Whois privacy protection?

    - by Guest
    I currently own several domains on which I am using a Whois privacy protection service to hide my personal details. In the near future, I would like to transfer some of these domains to a different registrar. It has been many years since I last performed domain transfers, so I am no longer knowledgeable about what it involves. However, I have read from several registrars that they ask their customers to disable Whois protection before effecting a domain transfer. Since there are several websites out there that publish archived versions of Whois information (and ask handsome money for the information to be hidden, of course), I would prefer to avoid having such a "gap" in my privacy protection. I figured that these websites would fetch Whois information mainly when a query is effected through their own website. However, I have found out that at least one of these sites had a copy of the Whois information for a new domain up on their site within hours after I registered it, so they must have some other source (of course I used a Google search to find that out, not their own site). What that tells me is that the time it takes for the domain transfers to go through would be more than enough for these rogue websites to cache my information. If my new registrar offers privacy protection for domains right from the point of registration as well, is there no way to transfer the domain between the two without reverting to my default Whois information in between?

    Read the article

< Previous Page | 504 505 506 507 508 509 510 511 512 513 514 515  | Next Page >