Search Results

Search found 14646 results on 586 pages for 'installation guide'.

Page 509/586 | < Previous Page | 505 506 507 508 509 510 511 512 513 514 515 516  | Next Page >

• WRTU54G-TM router with 3rd party firmware; Can custom firmware include stock binary portions?

  - by dlamblin

  I've been doing a lot of reading online about the Linksys WRTU54G-TM router model that I now own. It seems getting a custom firmware onto it is not a problem. But no one is talking about retaining the Voip features (yet). So far they're all disappointed that it's not a SIP machine and used GSM over IPSec. Personally I don't care about using it with non-t-mobile. If I take the original firmware, shouldn't I be able to extract it, and it's SquashFS image, and then move all of the t-mobile specific binaries for enabling the calling features over to a custom firmware installation (maybe OpenWRT)? You might ask why, and the reason is, that if I do this I could retain my calling features, which I do want, and ssh to the router and use it to run additional software, as any OpenWRT router could do. Does anyone know if this can be done, and how the firmware's binaries could be gotten at and installed correctly? Update I have found someone working on 3rd party WRTU54G-TM firmware. I am still interested in my second part of the questions, that is can't the stock firmware images be pulled apart and have the close-source, if any, binary kernel modules moved into another more flexible custom firmware?

  Read the article

• How to remove all Couchdb versions in Ubuntu 10.04 (server)? ( after multiple installs )

  - by DjangoRocks

  Hi all, I have done multiple installs of CouchDB using sudo aptitude install couchdb sudo ap-get install couchdb and more recently based on the instructions found at L http://wiki.apache.org/couchdb/Installing_on_Ubuntu May I know how do I uninstall or remove all the above installations? Best Regards. +++++++++++++++++++UPDATE++++++++++++++++++++++++ I've tried running the following commands: apt-get remove couchdb apt-get purge couchdb but received the following errors: (Reading database ... 39814 files and directories currently installed.) Removing couchdb ... invoke-rc.d: initscript couchdb, action "stop" failed. dpkg: error processing couchdb (--remove): subprocess installed pre-removal script returned error exit status 1 invoke-rc.d: initscript couchdb, action "start" failed. dpkg: error while cleaning up: subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: couchdb E: Sub-process /usr/bin/dpkg returned an error code (1) May I know how do i fix this? ON issuing the command : dpkg -l | grep couchdb I received the following response: rF couchdb 0.10.0-1ubuntu2 RESTful document oriented database, system D iF couchdb-bin 0.10.0-1ubuntu2 RESTful document oriented database, programs How do i uninstall CouchDB ? I think there's some file corruption?

  Read the article

• NetApp NDMP backup with BE 2010 R2 works, restore fails

  - by uuwe

  Hi, I'm having some issues with a new Backup Exec 2010 R2 installation. I configured a NetApp FAS2020 as an NDMP device and want to backup files from the NAS to a tape drive connected to my backup server. I set up ndmpd according to this document (http://www.symantec.com/business/support/index?page=content&id=TECH48957) and created a separate backup user (http://filers.blogspot.com/2006/09/setting-veritas-netbackup-with-non.html). Backup works perfectly, but restoring any file gives me an authentication failed error. The NDMP device has a "global" ndmp user configured in the device tab (tried this with the newly created ndmpd backup user and the netapp root) and I can also configure separate resource credentials in the BE restore job. I have tried setting the same accounts for the "global" ndmp device and the restore credentials and have also tried setting different accounts for them. NDMP debug level is at 5 and this is what shows up in /etc/messages. The session is closed immediately after it has been granted. 16:12:07 PST [Java_Thread:info]: ndmpdserver: ndmpd.access allowed for version = 4, sessionId = 51, from src ip = 192.168.11.17, dst ip = FAS2020-1/192.168.11.75, src port = 50857, dst port = 10000 16:12:07 PST [Java_Thread:info]: Ndmpd51: ndmpd session closed successfully for version = 4, sessionId = 51, from src ip = 192.168.11.17, dst ip = FAS2020-1/192.168.11.75, src port = 50857, dst port = 10000 Running wireshark on the backup server doesn't produce much. It shows a SYN - SYN/ACK - NDMP CONNECT_CLOSE Request from the backup server. The Resource Credentials for the restore job behave very oddly. If I enter NDMP credentials and do "Test All" it fails. If I use my regular domain backup account, it is successful. There are no failed or succeeded logons in the NetApp ndmp log and tracing this check shows that it doesn't even connect to the NAS. This makes me think that this is more likely flaky BE behaviour rather than misconfiguration of the NAS. Here is the options ndmp output: FAS2020-1 options ndmp ndmpd.access all ndmpd.authtype challenge ndmpd.connectlog.enabled on ndmpd.enable on ndmpd.ignore_ctime.enabled off ndmpd.offset_map.enable on ndmpd.password_length 16 ndmpd.preferred_interface disable ndmpd.tcpnodelay.enable off

  Read the article

• Problems with image/file upload in MediaWiki on Windows 2008 Server R2, using wrong temp directory

  - by Lasse V. Karlsen

  I have installed MediaWiki 1.15.2 under IIS as per the MediaWiki installation instructions for Windows 2008 Server. I have configured PHP to use a specific temp directory: upload_tmp_dir="C:\php\uploadtemp" I have specified that MediaWiki is allowed to upload: $wgEnableUploads = true; But when I try to upload an image, I get this error message in my browser: Internal error Could not find file "C:\Windows\Temp\php1AEA.tmp". Retrying will simply give me a new filename, but in the same location. The directory does not have any php* files in it, but since they're "temporary", they might be gone in a flash before Windows Explorer is able to show them so that might be a red herring. I've googled for this, and the most promising lead I found was on this page: Image upload problem - Is this bug fixed?, but since the text says "a bugfix was posted on the bug-report page", but provides no link to which bug page this relates to (php or mediawiki) nor the actual bug report, I've not found conclusively the bug report in question so that didn't help me much. Lots of pages indicates that this is a permission issue, so I tried setting permissions on c:\windows\temp as Modify by Everyone, still no dice. I tried changing the two system environment variables TEMP and TMP to point to C:\Temp instead, but MediaWiki still complains about not finding the file in C:\Windows\Temp. Note that I don't care a lot about where the files will actually be stored temporarily, so c:\windows\temp is fine by me. I do, however, care about them actually being uploaded correctly. Does anyone know of a fix, have any leads I can follow, or whatnot? The server is running Windows 2008 Server R2, all patches installed, and the PHP installed is 5.3.2, using IIS FastCGI.

  Read the article

• Access violations on Windows 2008 VPS

  - by James Hay

  I'm running a Windows 2008 VPS with 2GB RAM. I'm trying to install hMailServer on the VPS but when I get to the "choose installation directory" dialog I get error messages that keep popping up and make it so that I cannot continue. As soon as the dialog opens I get these two errors: "Access violation at address 73F53560. Read of addresss 00000014." "Access violation at address 73EEBE21. Read of addresss 00000018." Once I close these it frees up again but as soon as I click "Browse.." (to choose the directory) I get the following errors repeatedly that reopen if I close them. "Access violation at address 73F0E371. Read of address 00000014." "Access violation at address 73F4A006. Read of address 00000000." I have no idea how to fix these. I can't run memory diagnostics, I assume because it's a VPS and not an actual server.

  Read the article

• Can't get port based virtual hosts working in Apache2.2 CentOS 5.2, Plesk 8.6

  - by soopadoubled

  I have installed Google Sitemap Generator on my CentOS server, which is running plesk 8.6. Google Sitemap Generator adds an include to an external conf in my httpd.conf as follows: Listen 8181 NameVirtualHost *:8181 <VirtualHost *:8181> DocumentRoot "/usr/local/google-sitemap-generator/admin-console" ScriptAlias /cgi-bin/ "/usr/local/google-sitemap-generator/admin-console/cgi-bin/" <Directory "/usr/local/google-sitemap-generator/admin-console"> Allow from all Options ExecCGI DirectoryIndex index.html </Directory> </VirtualHost> LoadModule google_sitemap_generator_module /usr/local/google-sitemap-generator/lib/mod_sitemap.so After installation I should be able to navigate to myserverip:8181 and access the GSG console. Unfortunately my browser throws up "Safari can’t open the page “http://myserverip:8181/” because the server where this page is located isn’t responding." I've checked the port with netstat and nmap, and it's open and listening. I've added a rule to allow traffic on 8181 in iptables, but no joy. Is there anything obvious I could be missing? Any ideas would be greatly appreciated. Cheers, Ian

  Read the article

• Web SMTP Server(foo.com) will not send mail to exchange server which is also(foo.com)

  - by Atom

  I think I understand this problem fully, but I do not know how to approach it or where to go in terms of troubleshooting. I've got my one domain http://foo.com that runs a Zen Cart installation that needs to be able to send emails to users(order confirmation, password reset). This works fine to send to any other domain BUT foo.com. I'm running a locally hosted exchange server that is foo.com, and we can send and receive email just fine. If I run tail -f /usr/local/psa/var/log/maillog I recieve this error: Apr 1 10:08:51 foo qmail-local-handlers[25824]: Handlers Filter before-local for qmail started ... Apr 1 10:08:51 foo qmail-local-handlers[25824]: from= Apr 1 10:08:51 foo qmail-local-handlers[25824]: [email protected] Apr 1 10:08:51 foo qmail-local-handlers[25824]: cannot reinject message to '[email protected]' Apr 1 10:08:51 foo qmail: 1270141731.583139 delivery 32410: failure: This_address_no_longer_accepts_mail./ Apr 1 10:08:51 foo qmail: 1270141731.584098 status: local 0/10 remote 0/20 I understand that the foo.com SMTP service doesn't have any account but the one that is used to authenticate mail being sent, so of course, I understand why it's saying 'this address no longer accepts mail'. My question is, how can I get the foo.com(web) SMTP service to handle emails meant for my exchange server([email protected]) or how do I handle the mail that needs to be sent to our exchange server? Is this something to do with MX records? Thanks in advance A

  Read the article

• PNP4Nagios, nagiosgraph, separate Cacti, or something else for Nagios trending

  - by Matt

  I've been using Nagios for a while now and recently started using Cacti after being dissatisfied with the lack of scaling and lack of any GUI in MRTG. I'm interested in adding trending to my Nagios installation and wondered what was the best route to go. I've looked around a bit and have seen what's available, but there's not a lot of information around to differentiate them from each other. My Nagios install has about 250 hosts and 1100 service checks, but many of them are just simple network devices and there's only about 20 servers and 300 services associated with them. All servers but 2 are running Windows Server 2003. What are the main highlights of PNP4Nagios vs. nagiosgraph, or would I be better off using some sort of tool to convert the data to RRD form and just view it directly in Cacti? Is there a completely different direction I could go that would be even better? Please comment if you need any more information, I tend to be too wordy and tried to keep this question brief. Thanks!

  Read the article

• Recommended partitions to migrate from Windows XP to Windows 7 and Ubuntu

  - by Juanillo

  Hello, I have a system with Windows XP. My hard disk has 189 GB NTFS. I want to change the operative system to windows 7, but I want to add Ubuntu as well. As the change might take several days (because I don't have much time) I want to install one system (or Windows 7 or Ubuntu) keeping my windows XP installed in another partition so if something doesn't work in thebrand new operating system installed I can use my Windows XP installation. So I've thouht about doing something like this: Copy the data I want to keep to an external hard disk. Make partitions enough to install windows 7, keep data in another partition and another one to install Ubuntu. Copy the data I want to keep to the partition I've just created. Install Ubuntu in the partitions for Ubuntu. Check if Ubuntu works fine If it works OK install Windows 7 on the partition of Windows XP (Windows XP will be erased). Reinstall the programs in Windows 7. So my question is: How many partitions do you recommend me to have (and the size of each one and NTFS or FAT32)? The operative system I'm going to use more is Windows 7 (though I love Linux I use many programs which are windows dependant). Do you think I should do anything else / change something in the proccess to avoid any problem? I don't know if making the partitions can harm the data I have in the disk. Thanks.

  Read the article

• Adding License to VMware Server 2 via scripting command?

  - by andyt25

  Hi all, I recently discovered the vimsvc/license command in vmware-vim-cmd and was trying to use that to automatically add my license key to a fresh vmware installation. vmware-vim-cmd -H hostip -O portnumber vimsvc/license --source file '/path/to/plaintext-file-that-contains-my-license-key.txt' plaintext-file-that-contains-my-license-key.txt contains my key in XXXXX-XXXXX-XXXXX-XXXXX format, I've also tried it with an extra carriage return at the end. Adding the key that way doesn't work, however. I always get the following error message: [200] Reading local file: /path/to/plaintext-file-that-contains-my-license-key.txt [200] Size of file is 24 bytes. returned were XXXXX-XXXXX-XXXXX-XXXXX [200] Changing license source to: file:/path/to/plaintext-file-that-contains-my-license-key.txt [500] Caught unexpected exception Type: N5Vmomi5Fault17NotEnoughLicenses9ExceptionE what() =vmodl.fault.NotEnoughLicenses GetMsg() = There are not enough licenses installed to perform the operation. It's kinda silly to require a license to be able to add a license, don't you think? ;-) So how do I go about and add the key via script? I would like to avoid any interaction as I have the rest of the install fully scripted and non-interactive. Kind Regards, Stefan

  Read the article

• Correcting owner/permissions on damaged directory tree in linux

  - by mcs130

  I inadvertently made a backup copy of a directory recursively and forgot the -a (--preserve) switch when doing so. This damaged my backup directory (which contains data we need to access). The directory and all of its child folders and files comprise an installation of an application including postgress DB and solr files. The original copy was used to for a failed re-config attempt. Now I need to use the backup copy to start over, only the ownership of the backup copy is now root across everything and it is no longer usable (processes won't run due to ownership problems I created when I forgot the -a on the cp -r). I've re-installed a clean copy of the application into a 3rd location now (which has the correct owner/perms) and need to copy the owner/perms from this good directory over onto the damaged directory. What is the best way (if even possible) to do this. (I've Googled and seen things from perl scripting to setfacl/getfacl to do this but am unfortunately still confused). Apologies if this seems a dumb question. Thanks.

  Read the article

• windows cant "see" camera

  - by user330401

  So I bought a lil emerson camera and I am trying to get it to read the thing on windows 7. The instructions for the camer say when you first hook it up via usb AUTOPLAY will come up and your good to go. Well that worked for me the first time I hooked it up. However the 2nd time, it started trying to install drivers. Since then I can't get it to show up in windows explorer. I have tried disabling and uninstalling everything and trying to start from scratch but its useless, I'm stuck with having to pull the sd card everytime. I really dont like doing this as its a cheap camera, so if I can fix the communication between the devices via usb I would be really happy. As of right now the device installation shows a checked USB COMPOSITE DEVICE and 3 X'd GENERIC IMAGE DEVIC. Can someone please help me get this sorted. PS there are no drivers for this camera, not in the packaging, not available from emerson, and to be honest it shouldn't need any. The only function the camera has when hooked up via USB is charging and access to the DCIM. The charging still works, but the drive just won't load. Any suggestions?

  Read the article

• Mysql can not resolve hostnames when checking privileges

  - by Fabio

  I'm going crazy to solve this. I have a mysql installation (on machine db.example.org) which doesn't resolve a given hostname. I gave privileges using hostnames i.e. GRANT USAGE ON *.* TO 'user'@'host1.example.org' IDENTIFIED BY PASSWORD 'secret' GRANT SELECT, INSERT, UPDATE, DELETE, CREATE, INDEX ON `my_database`.* TO 'user'@'host1.example.org' However when I try to connect using mysql -u user -p -h db.example.org I obtain ERROR 1045 (28000): Access denied for user 'user'@'192.168.11.244' (using password: YES) I already checked for correct name resolution in the dns system: $ dig -x 192.168.11.244 ;; ANSWER SECTION: 244.11.168.192.in-addr.arpa. 68900 IN PTR host1.example.org. I've also checked for skip-name-resolve option in mysql variables in fact if I can access from another machine on the same subnet using hostname privileges. The only difference is that host1.example.org and db.example.org point the same ip on the same machine i.e. both db.example.org and host1.example.org have ip 192.168.11.244. In this way all the applications using that database can use the name db.example.org and we can move the data on other hosts (if needed) just by changing the dns record, leaving the application code unchanged. What should I do to solve this or at least to understand what's happening?

  Read the article

• ownCloud WebDAV interface seems to be broken

  - by Nobleleader13245

  I've been trying to host ownCloud on my server but everytime I try to it tells me this : Your web server is not yet properly setup to allow files synchronization because the WebDAV interface seems to be broken. Please double check the installation guides. This is my setup : Windows Server 2012 R2 IIS 8.5 PHP 5.5.11 ownCloud 6.0.3 MySQL 5.6.17 I tried google the error but I can't seem to find anything usefull. Some say I should try if this works : https://cloud.mcsoftworks.net/remote.php/webdav/ and yes I can navigate to this folder and I can open files from there. The calendar works and I can also just upload files from here https://cloud.mcsoftworks.net/ the only thing that doesn't seem to work is the sync client. The sync client doesn't say anything it just doesn't connect (Screenshot : http://prntscr.com/3p2apz) This is the error log : Warning core isWebDAVWorking: NO - Reason: [CURL] Error while making request: Could not resolve host: cloud.mcsoftworks.net (error code: 6) (Sabre_DAV_Exception) 2014-06-02T19:56:00+00:00 Warning core isWebDAVWorking: NO - Reason: [CURL] Error while making request: Could not resolve host: cloud.mcsoftworks.net (error code: 6) (Sabre_DAV_Exception) 2014-06-02T19:55:47+00:00 Warning core isWebDAVWorking: NO - Reason: [CURL] Error while making request: Could not resolve host: cloud.mcsoftworks.net (error code: 6) (Sabre_DAV_Exception) 2014-06-02T19:55:34+00:00 Warning core isWebDAVWorking: NO - Reason: [CURL] Error while making request: Could not resolve host: cloud.mcsoftworks.net (error code: 6) (Sabre_DAV_Exception) 2014-06-02T19:55:34+00:00 Fatal webdav Sabre_DAV_Exception_Forbidden: Path does not exist, or escaping from the base path was detected 2014-06-02T19:54:37+00:00 Fatal webdav Sabre_DAV_Exception_Forbidden: Path does not exist, or escaping from the base path was detected 2014-06-02T19:54:36+00:00 Fatal webdav Sabre_DAV_Exception_Forbidden: Path does not exist, or escaping from the base path was detected 2014-06-02T19:54:36+00:00 Fatal webdav Sabre_DAV_Exception_Forbidden: Path does not exist, or escaping from the base path was detected 2014-06-02T19:54:36+00:00 Warning core isWebDAVWorking: NO - Reason: [CURL] Error while making request: Could not resolve host: cloud.mcsoftworks.net (error code: 6) (Sabre_DAV_Exception) 2014-06-02T19:51:24+00:00 This is my php.ini : http://pastebin.com/es3MB8Uh Does anyone have any idea on how I should get this to work? I've been trying to get this to work for about 14 days now and it starts to annoy me =P

  Read the article

• ownCloud WebDAV interface seems to be broken

  - by Nobleleader13245

  I've been trying to host ownCloud on my server but everytime I try to it tells me this : Your web server is not yet properly setup to allow files synchronization because the WebDAV interface seems to be broken. Please double check the installation guides. This is my setup : Windows Server 2012 R2 IIS 8.5 PHP 5.5.11 ownCloud 6.0.3 MySQL 5.6.17 I tried google the error but I can't seem to find anything usefull. Some say I should try if this works : [hostname]/remote.php/webdav/ and yes I can navigate to this folder and I can open files from there. The calendar works and I can also just upload files the web version of ownCloud the only thing that doesn't seem to work is the sync client. The sync client doesn't say anything it just doesn't connect (Screenshot : http://prntscr.com/3p2apz) This is the error log : Warning core isWebDAVWorking: NO - Reason: [CURL] Error while making request: Could not resolve host: cloud.mcsoftworks.net (error code: 6) (Sabre_DAV_Exception) 2014-06-02T19:56:00+00:00 Warning core isWebDAVWorking: NO - Reason: [CURL] Error while making request: Could not resolve host: cloud.mcsoftworks.net (error code: 6) (Sabre_DAV_Exception) 2014-06-02T19:55:47+00:00 Warning core isWebDAVWorking: NO - Reason: [CURL] Error while making request: Could not resolve host: cloud.mcsoftworks.net (error code: 6) (Sabre_DAV_Exception) 2014-06-02T19:55:34+00:00 Warning core isWebDAVWorking: NO - Reason: [CURL] Error while making request: Could not resolve host: cloud.mcsoftworks.net (error code: 6) (Sabre_DAV_Exception) 2014-06-02T19:55:34+00:00 Fatal webdav Sabre_DAV_Exception_Forbidden: Path does not exist, or escaping from the base path was detected 2014-06-02T19:54:37+00:00 Fatal webdav Sabre_DAV_Exception_Forbidden: Path does not exist, or escaping from the base path was detected 2014-06-02T19:54:36+00:00 Fatal webdav Sabre_DAV_Exception_Forbidden: Path does not exist, or escaping from the base path was detected 2014-06-02T19:54:36+00:00 Fatal webdav Sabre_DAV_Exception_Forbidden: Path does not exist, or escaping from the base path was detected 2014-06-02T19:54:36+00:00 Warning core isWebDAVWorking: NO - Reason: [CURL] Error while making request: Could not resolve host: cloud.mcsoftworks.net (error code: 6) (Sabre_DAV_Exception) 2014-06-02T19:51:24+00:00 This is my php.ini : http://pastebin.com/es3MB8Uh Does anyone have any idea on how I should get this to work? I've been trying to get this to work for about 14 days now and it starts to annoy me =P

  Read the article

• Instant connection to wireless network but delayed internet access on Mediacom with Windows 7

  - by David

  I have Mediacom cable internet and their provided modem/wireless router a Cisco DPC3825. Each of the laptops experiencing the trouble have Windows 7 64-bit. When connecting to the wireless network each computer will take a second or two to connect and then toggle from "no internet access" to "internet access" however, no websites are accessible for about five minutes after connecting. After that, there aren't any problems. It happens on all 3 of the laptops I have available and none of them have problems on any other network. It seems like my phone doesn't have the delay issue when it connects. I've power cycled the modem/router along with a DNS flush. I have some of the DNS servers manually set to Google DNS addresses and one just default. I've contacted and had Mediacom support try all its tricks. They changed the SSID and password along with resetting the thing remotely a handful of times. It was installed just this month and seemed to pass the tech's checks upon installation. Nothing in the settings has been changed, but it's been exhibiting this problem from the get go. This guy seems to be having the same problem, but no solution was posted. http://www.dslreports.com/forum/r27372861-IA-Connection-to-Mediacom-wireless-Modem-no-internet- Help greatly appreciated.

  Read the article

• With WebMatrix, How do I Connect to a MySQL Database on a Colleague's Machine?

  - by Ash Clarke

  I have scoured Google trying to discover how to do this, but essentially I want to connect to a colleague's MySQL database for working together on a Wordpress installation. I am having no luck and keep getting an error about the connection not being possible: Unable to connect to any of the specified MySQL hosts. MySql.Data.MySqlClient.MySqlException (0x80004005): Unable to connect to any of the specified MySQL hosts. at MySql.Data.MySqlClient.NativeDriver.Open() at MySql.Data.MySqlClient.Driver.Open() at MySql.Data.MySqlClient.Driver.Create(MySqlConnectionStringBuilder settings) at MySql.Data.MySqlClient.MySqlPool.GetPooledConnection() at MySql.Data.MySqlClient.MySqlPool.TryToGetDriver() at MySql.Data.MySqlClient.MySqlPool.GetConnection() at MySql.Data.MySqlClient.MySqlConnection.Open() at Microsoft.WebMatrix.DatabaseManager.MySqlDatabase.MySqlDatabaseProvider.TestConnection(String connectionString) at Microsoft.WebMatrix.DatabaseManager.IisDbManagerModuleService.TestConnection(DatabaseConnection databaseConnection, String configPathState) at Microsoft.WebMatrix.DatabaseManager.Client.ClientConnection.Test(ManagementConfigurationPath configPath) at Microsoft.WebMatrix.DatabaseManager.Client.DatabaseHierarchyInfo.EnsureLoaded() The connection details are copied from my colleague's connection string, with the exception of the server being modified to match the IP address of his machine. I'm not sure if there is a firewall port I have to open or a configuration file I have to modify, but I'm not having much luck so far. (There is a strong chance that, by default, web matrix / iis express doesn't set the mysql database it creates to accept remote connections. If anyone knows how to change this, that would be grand!) Anyone have any ideas?

  Read the article

• How to Refresh or Reset Windows 8 without the System Reserved partition?

  - by Karan

  The article Refresh and reset your PC mentions exactly what happens during the refresh and reset operations in Windows 8: Refresh The PC boots into Windows RE. Windows RE scans the hard drive for your data, settings, and apps, and puts them aside (on the same drive). Windows RE installs a fresh copy of Windows. Windows RE restores the data, settings, and apps it has set aside into the newly installed copy of Windows. The PC restarts into the newly installed copy of Windows. Reset The PC boots into the Windows Recovery Environment (Windows RE). Windows RE erases and formats the hard drive partitions on which Windows and personal data reside. Windows RE installs a fresh copy of Windows. The PC restarts into the newly installed copy of Windows. It is my understanding that Windows RE (Recovery Environment) is included as part of the System Reserved partition created by default on the first hard disk. The size of this partition has gone up to 350 MB from the 100 MB it used to be in Vista/Windows 7, no doubt as a result of adding these features. Now we have already discussed how to skip the creation of this System Reserved partition during Setup. Basically, the same techniques that used to work with Windows 7 work with Windows 8 as well. What I want to know is, what will be the exact repercussions of not having the System Reserved partition in place? I assume Troubleshoot / Advanced options should still be available as before: But what about the Troubleshoot menu itself? Will the Refresh and Reset options disappear? Will they remain but be unavailable? Or possibly they will throw an error if selected? Also, will it be possible to access and successfully execute these options if installation media is available? Anything else that might be affected?

  Read the article

• Reconfiguring, then deleting obsolete pagefile.sys from C: in one go using a batch script

  - by DanielSmedegaardBuus

  I'm trying to set up an automated script for a Windows XP installer. It's a batch script that runs on first boot after installation, and among the things I'm trying to accomplish, is removing the pagefile from C: entirely, and putting a 16-768 MB pagefile on D: instead. Here're my batch file instructions: echo === Creating new page file on D: ... cscript %windir%\system32\pagefileconfig.vbs /create /i 16 /m 768 /vo d: >nul echo. echo === Removing old page file from C: ... cscript %windir%\system32\pagefileconfig.vbs /delete /vo C: attrib -s -h c:\pagefile.sys del c:\pagefile.sys My problem is that while these are sane commands, the removal of the pagefile on C: requires me to reboot before those commands succeed.b Or, in other words — I have to first create the D: pagefile, then reboot and delete the c:\pagefile.sys file, or I'm stuck with a c:\pagefile.sys file which isn't even recognized by Windows itself (it'll just say that there's a page file on D:, and that C: has no pagefile at all). Obviously because already some pages are written to the C:\pagefile.sys file. So how would I go about accomplishing this in one go? Or, in two gos, if this is "batch scriptable" :) TIA, Daniel :) EDIT: I should probably clarify: Running those commands above are all valid, but they'll only succeed fully if I re-run the "attrib" and "del" commands at next boot. The C: pagefile is in use at the time, so I cannot delete the file it uses, and Windows itself won't remove it when I configure it to not use C: as a page file drive. Instead, it'll leave an orphaned c:\pagefile.sys file behind (which is really large). I don't necessarily need this to work in one go, registering the last two commands to run after a reboot would also be great :)

  Read the article

• security update in centos, which way is it?

  - by user119720

  Recently something have been bothered with my mind regarding my linux CentOS box.My client have been asking to set up a CentOS machine in their environment which works as server. One of their requirement is to make sure that the set up is to be as secure as possible. Mostly have been covered except the security update inside CentOS. So my question are as follows: 1.. How to apply the latest security,patches or bug fixes in CentOS? When doing some research, I've been told that we can update the security of CentOS by running yum install yum-security but after install this plug in,seems there is no output for this method.Its like this command is not working anymore. 2.. Can i update the security patches through rpm packages? I couldn't find any site that can download the security patches,enhancement or bug fixes for CentOS.But I know that CentOS have been releasing these update through their CentOS announcement here It just it lack of documentation on how to apply these update into my CentOS installation. For now the only way that I know is to run yum update I am hoping that someone can help me to clarify these matter.Thanks.

  Read the article

• Syntax Error when setting up Domain Alias

  - by Poundtrader

  I'm attempting to set up a domain alias via Pre VirtualHost Include and I'm recieving the following error: Error: An error occurred while running: /usr/local/apache/bin/httpd -DSSL -t -f /usr/local/apache/conf/httpd.conf Exit signal was: 0 Exit value was: 1 Output was: --- Syntax error on line 15 of /usr/local/apache/conf/includes/pre_virtualhost_global.conf: CustomLog takes two or three arguments, a file name, a custom log format string or format name, and an optional "env=" clause (see docs) --- Basically I have two domains, the main domain has an opencart installation within a directory (/buy) and I'm attempting to use the multi-store function which allows you to administer multiple stores on multiple domains via the one opencart dashboard. My issue is that I have the opencart installations within the /buy directory so I have been given the following code which should allow me to use this functionality over the multiple cPanel accounts within the same VPS. <VirtualHost 87.117.239.29:80> ServerName newdomain.co.uk ServerAlias www.newdomain.co.uk Alias /buy /home/originaldomain/public_html/buy/ DocumentRoot /home/newdom/public_html ServerAdmin [email protected] ## User newdom # Needed for Cpanel::ApacheConf <IfModule mod_suphp.c> suPHP_UserGroup newdom newdom </IfModule> <IfModule mod_ruid2.c> RUidGid newdom newdom </IfModule> CustomLog /usr/local/apache/domlogs/newdomain.co.uk-bytes_log “%{%s}t %I .\n%{%s}t %O .” CustomLog /usr/local/apache/domlogs/newdomain.co.uk combined ScriptAlias /cgi-bin/ /home/newdom/public_html/cgi-bin/ </VirtualHost> Does anyone know how to get this code to work? Thanks,

  Read the article

• 500 error with deploying rails application via apache2+passenger

  - by user1633983

  I finally completed my own app, so the only work left is deploying the app. I'm using Ubuntu 10.04 and apache2(installed by apt-get), so I'm trying to deploy through passenger. I installed passenger gem like this: sudo gem install passenger rvmsudo passenger-install-apache2-module and I configured apache settings as what the installation message says. I added below lines in the middle of /etc/apache2/apache2.conf file. LoadModule passenger_module /home/admin/.rvm/gems/ruby-1.9.3-p194/gems/passenger-3.0.17/ext/apache2/mod_passenger.so PassengerRoot /home/admin/.rvm/gems/ruby-1.9.3-p194/gems/passenger-3.0.17 PassengerRuby /home/admin/.rvm/wrappers/ruby-1.9.3-p194/ruby and, I appended below lines in /etc/apache2/sites-available/default file. <VirtualHost *:80> ServerName localhost # !!! Be sure to point DocumentRoot to 'public'! DocumentRoot /home/admin/homepage/public <Directory /home/admin/homepage/public> # This relaxes Apache security settings. AllowOverride all # MultiViews must be turned off. Options -MultiViews </Directory> But when I restart the apache service and hit the address, 500 error occurs. At first, it was same 500 error but the 500 error page is from apache's, but when I reinstalled the libapache2-module-passenger, the 500 error page is changed to that from rails'. Because of rails' 500 error page(which is located at public/500.html), I think passenger module is properly connected with apache. What should I do to fix this problem? Do I need to configure something inside my app before deployment?

  Read the article

• Can't access my accelerated hard disk from msdos after installing linux on ssd cache

  - by Chibueze Opata

  I mistakenly installed Linux Mint on my ssd (forgot my PC actually came with one), when it detected a ~31GiB disk that it wanted to install to, I was a bit confused since I had brought out 30Gb in my primary disk for it, but I clicked continue. After installation, I tried to boot back into my Windows and it brought out some Intel Raid Disk Utility stuff saying I should disable acceleration on a disk something couldn't be found, I canceled it but whatever I tried, recovery tools, setups etc, I couldn't just access the drive which was apparently using the SSD as cache. Since then I've been stuck. I tried setting the 'raid' flag to the disk from 'gParted', still I couldn't. I tried the diskraid utility from windows recover disk, it said it couldn't detect any raid, diskpart sees the partition but doesn't see the volume, when I remove the raid flag, it sees the volume as one of raw type, and I can't access anything. I can however mount the drive from terminal in Mint and access my files, but I don't have any backup media at the moment so I can do a factory re-install. Please how do I go about solving the issue, precisely I would like to know how to boot into the drive again. Thanks!

  Read the article

• How can I enable PHP5 for a site? Having problems with every single method.

  - by John Stephens

  I'm working on a client site that is hosted on someone's DIY Debian Linux server [Apache/1.3.33 (Debian GNU/Linux)], and I'm trying to install a script that requires PHP5. By default, the server parses .php files with PHP 4.3.10-22, which is configured at /etc/php4/apache/php.ini, according to phpinfo(). On the server I can see a config directory for PHP5 adjacent to the PHP4 directory: /etc/php5.0/apache2/php.ini. I have tried multiple methods to enable PHP5 for the document root where the site's files are hosted, including all available methods mentioned here. By far, the most common suggestion I've found is to add one or both of the following lines to the site's .htaccess file: AddHandler application/x-httpd-php5 .php AddType application/x-httpd-php5 .php Trouble is, when either or both of those lines are present, the site forces my browser to download any .php files requested, without parsing the PHP at all. All of the other methods mentioned in the above article cause a 500 Internal Server Error. There is no hosting control panel I can access in a browser to enable PHP5 for the site, but I do have shell access. When I asked the server administrator about this issue, he encouraged me to search for the answer on Google. Where could I begin to troubleshoot this issue? Are there ways to test or verify the server's specific PHP5 installation and configuration, using the command line or some other method? Do you have other suggestions to enable PHP5?

  Read the article

• Deploying workstations - best practices?

  - by V. Romanov

  Hi guys I've been researching on the subject of workstation deployment for a while, and found a ton of info and dozens different methods and tools, but no "best practice" method that doesn't lack at least one feature that i consider required for the solution to be perfect. I'm currently interested in windows workstation deployment, but if the tools can be extended to Linux, then it's an added value. I want the deployment tools I use to be able to do the following: hardware independent - I want my image or installation to have a minimum of hardware and driver dependency, so that i can use a single image/package for all workstations easily updatable - I want to be able to update my image as easily as possible without redeploying/rebuilding/reimaging all configurations PXE bootable deployment - I want the tools to be bootable off the network so that I don't need a boot cd/DOK. scriptable for minimum human input - Ideally, the tool should run automatically after being booted and perform a "default" deployment (including partitioning) unless prompted otherwise. i.e - take a pc, hook it up, power on, PXE boot and forget about it until the OS is deployed. I found no single product or environment that does all this. Closest i came to is the windows deployment services/WIM image format. I also checked out numerous imaging and deployment tools including clonezilla, ghost, g4u, wpkg and others, but most of them lack the hardware Independence and updatability features. We currently have a Symantec Ghost server setup that does imaging over the network, but I'm not satisfied with it as it has all the drawbacks i listed above. Do you have suggestions how to optimize the process of workstation deployment? How do you deploy them in your organization? Thanks! Vadim.

  Read the article

< Previous Page | 505 506 507 508 509 510 511 512 513 514 515 516  | Next Page >