Search Results

Search found 56300 results on 2252 pages for 'local working'.

Page 509/2252 | < Previous Page | 505 506 507 508 509 510 511 512 513 514 515 516  | Next Page >

• Printing to shared printers across VPN

  - by CYMR0

  I have a program that prints labels at five remote sites. Two sites, aren't working, but the rest are with an identical (as far as I can tell) setup. Using Wireshark, I have determined that the handshaking all goes well, but after the "Open Print File Response" the packet that is sent from the server, doesn't reach the client. But I'm a bit at a loss as to where I go from here. I know the port the packet was sent on (445) isn't being blocked, the RST packet gets sent on the same port and that gets there fine. It's also weird that the three out of five sites are working fine. This has been up and running for years without issue, all that we have changed is our connectivity (from DSL to bonded DSL). But this traffic is over a VPN - so it can't be the ISP interfering either can it? I'm totally stuck, and any help would be much appreciated. Thanks!

  Read the article

• Outlook receives winmail.txt attachment instead of Excel, PowerPoint or Word attachments from Lotus

  - by Philippe

  Ok so the title pretty much says it all. We are offering a Hosted Exchange solution for our customer. Everything is working fine except for one customer complaining that he is receiving winmail.dat or winmail.txt attachments instead of the actual Word Excel or PowerPoint attachments he should be receiving, only when these messages come from a specific European senders, that is using Lotus Notes. I know that usually the problem is coming from Outlook senders to other mail clients, but this is not the first they inform me of this but I can't find anything on the matter so far. Has anyone ever gotten and solved this problem? If not, does anyone have any idea regarding this? I had solved this problem a few months ago, by upgrading Outlook to SP2 and then uninstalling it using the Service Pack removing tool of Microsoft. It seems that only the latest SP1 version could work but not the SP2. The problem is that now nothing is working at all. Thank you for your help, Philippe

  Read the article

• APC ups es 700 randomly overload

  - by Matteo Mosca

  First of all, I live in Italy, Europe, so keep this in mind for Volt/Watt considerations. Standard voltage in Italian apartments is 220V. In my living room I have 2 APC ups, one being an ES-550 and the other an ES-700 They each have 4 slots for surge protection only, and 4 slots for surge protection + battery backup. Just to give all the information, they both got their battery replaced less than one month ago. The ES-550 works fine, without any problem. On the battery I have connected: Pc Monitor Sony Bravia 46'' 4th slot is empty The ES-700 has the following on battery: Xbox 360 Ps3 (standby when not used) Wii (standby when not used) Netgear 8 port switch (always on) Here's what happens: the ES-700, randomly, but mostly at night when I'm sleeping, goes like "overload", with the constant beep. If I try to shut it off keeping the power button pressed, nothing happens. The only thing that works is unplugging random stuff (sometimes unplugging 1 console works, other times I have to unplug all 4 devices). Every time this happens the problem is "real", meaning the 4 devices become unpowered, so it's not just an "alarm no working properly" problem. While I'm sleeping, of course, the power usage is what described on the list, 2 devices on standy, 1 off and 1 on. Today it happened again while I was playing with my Ps3. I unplugged it, problem went away. I plugged it again, and it kept working fine. I just can't figure out what's the problem. The only additional info I can provide is that this behaviour started after a big power outage last december 26 (a blackout that lasted almost all day) but the "surge protection" part of those UPS should be there for those problems, to leverage peaks when power goes away or gets restored. Another funny thing is, althought it might not be related, for a couple of days after that event the Wii was unable to power on, I thought its power transformer was broken, but then it suddenly started working again. I can be sure it's not the Wii overloading the UPS because the overload happens even if I leave the Wii unplugged. Any suggestion is really appreciated, and I can provide any additional info, if needed, that didn't come to mind right now. Thanks.

  Read the article

• Login with Enterprise Principal Name using sssd AD backend in Ubuntu 14.04 LTS

  - by Vinícius Ferrão

  I’m running sssd version 1.11 with the AD backend in Ubuntu 14.04 LTS (1.11.5-1ubuntu3) to authenticate users from Active Directory running on Windows Server 2012 R2, and I’m trying to achieve logins with the User Principal Name for all users of the domain. But the UPN are always Enterprise Principal Names. Let-me illustrate the problem with my user account: Domain: local.example.com sAMAccountName: ferrao UPN: [email protected] (there’s no local in the UPN) I can successfully login with the sAMAccountName atribute, which is fine, but I can’t login with [email protected] which is my UPN. The optimum solution for me is to allow logins from sAMAccountName and the UPN (User Principal Name). If’s not possible, the UPN should be the right way instead of the sAMAccountName. Another annoyance is the homedir pattern with those options in sssd.conf: default_shell = /bin/bash fallback_homedir = /home/%d/%u What I would like to achieve is separated home directories from the EPN. For example: /home/example.com/user /home/whatever.example.com/user But with this pattern I can’t map the way I would like to do. I’ve looked through man pages and was unable to find any answers for this issues. Thanks,

  Read the article

• How can I override mod-php5's .php mapping to php4-cgi per VirtualHost or Directory?

  - by geocoo

  I am running Debian Linux with apache2 and libapache2-mod-php5 5.3.3-7. I have one VirtualHost which requires php4. So I researched and compiled php4-cgi. However, I cannot seem to: Override mod-php5's mapping of .php in that vhost (or even globally, without disabling php completley). Even find where that mapping is made, in hope of disabling it and enabling mod-php5 or php4-cgi per vhost. This is my php4-cgi mapping (Inside the one php4 vhost): ScriptAlias /php4 /usr/local/php4/bin <Directory /usr/local/php4/bin> Options +ExecCGI +FollowSymLinks </Directory> <Directory /www/test> AddHandler php4-cgi-script .php Action php4-cgi-script /php4/php Options +ExecCGI </Directory> This does not work, mod-php5 still runs all .php files in that vhost/directory. If I change the file extension in the AddHandler above from .php to .php4, then .php4 files do run php4-cgi as expected, but I can't change all the files in the app to .php4. I thought maybe I could disable the mod-php5's mapping in my vhost or directory, then do my cgi-config (as above) but many combinations of these in different contexts did not work: RemoveHandler .php RemoveType .php php_flag engine off (this seems to even disable my php4-cgi so that wont work) The only other place I can find any mapping is in /etc/mime.types, but commenting out the relevant lines and restarting apache2 does not affect mod-php5's .php mapping. I have searched as much as I can, it is now a mystery to me. Any help or direction would be greatly appreciated.

  Read the article

• ASP.NET MVC Resource not found

  - by TheLorax

  I am working on an MVC project in Visual Studio 2010 with .NET Framework 4.0 + MVC2 and everything works if I set the target framework to .NET 4.0. However, my host does not offer .NET 4.0 in order to deploy the site I need to get it working on .NET 3.5. I tried converting it to ASP.NET 3.5 and everything builds just fine except now when I try to load the homepage, I get a 404 Error saying: The resource cannot be found. Description: HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable. Please review the following URL and make sure that it is spelled correctly. Requested URL: /home Version Information: Microsoft .NET Framework Version:2.0.50727.4927; ASP.NET Version:2.0.50727.4927 Anyone know why this is? Thank You for Your help. TheLorax

  Read the article

• kinit gives me a Kerberos ticket, but no AFS token

  - by Tomas Lycken

  I'm trying to setup access to my university's IT environment from my laptop running Ubuntu 12.04, by (mostly) following the IT-department's guides on AFS and Kerberos. I can get AFS working well enough so that I can navigate to my home folder (located in the nada.kth.se cell of AFS), and I can get Kerberos working well enough to forward tickets and authenticate me when I connect with ssh. However, I don't seem to get any AFS tokens locally, on my machine, so I can't just go to /afs/nada.kth.se/.../folder/file.txt on my machine and edit it. I can't even stand in /afs/nada.kth.se/.../folder and run ls without getting Permission denied errors. Why doesn't kinit -f [email protected] give me an AFS token? What do I need to do to get one?

  Read the article

• Oracle 10g for Windows does not start up on system boot

  - by Mike Dimmick

  We have an Oracle 10g Enterprise Edition installation (10.2.0.1.0) on a Windows Server 2003 virtual machine. It was initially created with Virtual Server 2005 R2 SP1 but has now been migrated to Windows Server 2008 Hyper-V. The services start on system boot, but the instance does not start up. This problem was actually occurring on Virtual Server after a migration from one server to another, but I managed to fix it then with: oradim -edit -sid ORCL -startmode auto However, this now has no effect. oradim.log (in %OracleHome%\database\oradim.log) says: Thu Jun 10 14:14:48 2010 C:\oracle\product\10.2.0\db_3\bin\oradim.exe -startup -sid orcl -usrpwd * -log oradim.log -nocheck 0 Thu Jun 10 14:14:48 2010 ORA-12560: TNS:protocol adapter error sqlnet.log in the same folder has: Fatal NI connect error 12560, connecting to: (DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleorcl)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=orcl)(CID=(PROGRAM=C:\oracle\product\10.2.0\db_3\bin\oradim.exe)(HOST=ORACLE-VM)(USER=SYSTEM)))) VERSION INFORMATION: TNS for 32-bit Windows: Version 10.2.0.1.0 - Production Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production Time: 10-JUN-2010 14:14:48 Tracing not turned on. Tns error struct: ns main err code: 12560 TNS-12560: TNS:protocol adapter error ns secondary err code: 0 nt main err code: 530 TNS-00530: Protocol adapter error nt secondary err code: 2 nt OS err code: 0 The ORA_ORCL_AUTOSTART registry value is set to TRUE, so it should be auto-starting - and you can see that it's trying to. The problem also occurs when stopping and restarting the OracleServiceORCL service. I've enabled SQL*Net tracing which shows: [10-JUN-2010 15:09:33.919] snlpcss: entry [10-JUN-2010 15:09:34.419] snlpcss: Unable to spawn Oracle oracle (DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq))) orcl, error 2. [10-JUN-2010 15:09:34.419] snlpcall: exit On a hunch that error 2 is Windows error 2 (file not found) I tried restarting the service with Process Monitor watching oradim.exe, but this appears to delay things just enough that it always works. Right now I have a horrible hack where I've created a Scheduled Task to run oradim -startup -sid ORCL when the Administrator account logs on, and set the VM to auto-logon. I'd still like to work out why it's not working.

  Read the article

• VMWare Fusion cannot connect to the NAT connection on my Mac

  - by FFish

  I have been using VMWare Fusion on my Mac to check out my websites on localhost. Now I can't connect anymore with the NAT connection. There seems to be a problem with my IP address or Mac address? I have no idea what causes this, it was working fine before!? In the XP (SP2) VM, in the taskbar I see the Local Area Connection with the yellow warning icon. The bubble says: "This connection has limited or no connectivity. You might not be aisle to access the Internet or some network resources. For more information, click this message." Doing that opens up the Local Area Connection Status panel. In the Support tab, when I click the repair button I get following message: "Windows could not finish repairing the problem because the following action cannot be completed: Renewing IP address." I tried disabling my firewall and also XAMPP that I use as server on OSX. VMWware version: 3.1 VM: XP SP2 Mac OSX 10.6.3 Any help would be greatly appreciated.

  Read the article

• "This computer has dynamically assigned IP addresses" error when installing Active Directory Domain Controller

  - by smhnaji

  This is a working Windows Server 2008 that I should install Active Directory on it. I found http://www.howtogeek.com/99323/ and followed the steps. After Additional Domain Controller Options, I'm asked the question "This computer has dynamically assigned IP addresses". As I see, the message states that Dynamic IP addressing has been used for the server, while this is wrong. When I come to Network And Sharing Center, and click on Local Area Connections - Properties - Internet Protocol Version 4 (TCP/IPv4) - Properties, I see that the main IP address (as well as DNS Server) and also all other IP addresses are assigned statically. So it should be OK. I cannot believe any server using dynamic IP(s)! Note: No IPv6 has been set for the server. Please tell me why the error is given and which of the options available, should I choose? Note that it's a production server and is working with many users in WORKGROUP. No change should be affected nor to the IPs, neither to users connecting to the server.

  Read the article

• How does Windows 7 DNS client work?

  - by Mark Allison

  I am using a local DHCP and DNS server on my home network on a linux machine. It is running CentOS 6.3 with dnsmasq 2.48. It's all working fine except for local DNS lookups for Windows machines only. I have a mix of Ubuntu, CentOS and Windows machines on the network, some virtual, some physical. I have a machine called boron and the domain is called localdomain If I ping boron from any linux machine, I get [root@lithium lists]# ping -c3 boron PING boron.localdomain (10.0.0.5) 56(84) bytes of data. 64 bytes from boron.localdomain (10.0.0.5): icmp_seq=1 ttl=64 time=0.740 ms 64 bytes from boron.localdomain (10.0.0.5): icmp_seq=2 ttl=64 time=0.478 ms 64 bytes from boron.localdomain (10.0.0.5): icmp_seq=3 ttl=64 time=0.458 ms --- boron.localdomain ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 2000ms rtt min/avg/max/mdev = 0.458/0.558/0.740/0.131 ms If I do it from my Windows 7 machine, I get: Ping request could not find host boron. Please check the name and try again. If I try ping boron.localdomain I get: Pinging boron.localdomain [67.215.65.132] with 32 bytes of data: Reply from 67.215.65.132: bytes=32 time=16ms TTL=57 Reply from 67.215.65.132: bytes=32 time=188ms TTL=57 Reply from 67.215.65.132: bytes=32 time=15ms TTL=57 Reply from 67.215.65.132: bytes=32 time=14ms TTL=57 Ping statistics for 67.215.65.132: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 14ms, Maximum = 188ms, Average = 58ms which is clearly wrong. Why is it going out to the internet? Why can't my windows machine resolve the boron hostname to a FQDN? My Windows machines and linux machines get their network config from DHCP. UPDATE If I do ipconfig /all in Windows, it looks as I would expect: Windows IP Configuration Host Name . . . . . . . . . . . . : lanthanum Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : .localdomain Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : .localdomain Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller Physical Address. . . . . . . . . : 50-E5-49-38-FC-A2 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 10.0.0.57(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : 23 August 2012 13:58:45 Lease Expires . . . . . . . . . . : 24 August 2012 07:58:48 Default Gateway . . . . . . . . . : 10.0.0.6 DHCP Server . . . . . . . . . . . : 10.0.0.6 DNS Servers . . . . . . . . . . . : 10.0.0.6 208.67.222.222 208.67.220.220 NetBIOS over Tcpip. . . . . . . . : Enabled When I do an nslookup I get: Server: carbon.localdomain Address: 10.0.0.6 *** carbon.localdomain can't find boron: Unspecified error However if I do ifconfig -a in Linux I get: [root@nitrogen ~]# ifconfig -a eth0 Link encap:Ethernet HWaddr 00:0C:29:AF:EC:2A inet addr:10.0.0.7 Bcast:10.0.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:187687 errors:0 dropped:0 overruns:0 frame:0 TX packets:5857 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:23910700 (22.8 MiB) TX bytes:712964 (696.2 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:329894 errors:0 dropped:0 overruns:0 frame:0 TX packets:329894 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:67153143 (64.0 MiB) TX bytes:67153143 (64.0 MiB) and nslookup: [root@nitrogen ~]# nslookup boron Server: 10.0.0.6 Address: 10.0.0.6#53 Name: boron Address: 10.0.0.5 Both machines are on the same network using the same DHCP server. UPDATE 2 I thought the issue was resolved but I am getting intermittent DNS resolving issues but only on my Windows 7 machine. All my linux boxes are fine. This is what happens when I ping and nslookup from Windows to a Windows 2008 Server: C:\Users\mark>nslookup magnesium Server: carbon.localdomain Address: 10.0.0.6 Name: magnesium.localdomain Address: 10.0.0.12 C:\Users\mark>ping magnesium Pinging magnesium.localdomain [67.215.65.132] with 32 bytes of data: Reply from 67.215.65.132: bytes=32 time=267ms TTL=57 Reply from 67.215.65.132: bytes=32 time=162ms TTL=57 Reply from 67.215.65.132: bytes=32 time=510ms TTL=57 Reply from 67.215.65.132: bytes=32 time=146ms TTL=57 Ping statistics for 67.215.65.132: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 146ms, Maximum = 510ms, Average = 271ms And from Linux: [root@beryllium ~]# ping -c4 magnesium PING magnesium.localdomain (10.0.0.12) 56(84) bytes of data. 64 bytes from magnesium.localdomain (10.0.0.12): icmp_seq=1 ttl=128 time=0.176 ms 64 bytes from magnesium.localdomain (10.0.0.12): icmp_seq=2 ttl=128 time=0.634 ms 64 bytes from magnesium.localdomain (10.0.0.12): icmp_seq=3 ttl=128 time=0.685 ms 64 bytes from magnesium.localdomain (10.0.0.12): icmp_seq=4 ttl=128 time=0.263 ms --- magnesium.localdomain ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3002ms rtt min/avg/max/mdev = 0.176/0.439/0.685/0.223 ms [root@beryllium ~]# nslookup magnesium Server: 10.0.0.6 Address: 10.0.0.6#53 Name: magnesium.localdomain Address: 10.0.0.12 UPDATE 3 I stopped the Windows DNS client on my Windows 7 machine with net stop dnscache and it is now working fine. It would be nice to get DNS working with the DNS client on, but I might be OK without it, what do you think?

  Read the article

• Postfix won't pipe to PHP file through aliases file

  - by jfreak53

  I'm trying to pipe from postfix to a command. According to Postfix logs it worked, but when I check the command it didn't. This is a fresh postfix install. This is my alias file: # See man 5 aliases for format postmaster: root support: "| /usr/bin/php -q /var/www/pipe/pipe.php" I run sendmail [email protected] then type it and then on a separate line type . and it goes. I check the postfix log /var/log/mail.log and this is what it states: Nov 2 15:32:33 server3 postfix/local[13284]: 42C429E0B5: to=<[email protected]>, relay=local, delay=156, delays=156/0.01/0/0.05, dsn=2.0.0, status=sent (delivered to command: /usr/bin/php -q /var/www/pipe/pipe.php) So according to that it worked, but it doesn't. If I run echo 'text' | /usr/bin/php -q /var/www/pipe/pipe.php it does work just fine. Any ideas what I did wrong? I know piping is working, I originally checked it by running that command above WITHOUT the quotes, so just support: | /usr/bin/php -q /var/www/pipe/pipe.php What it did there was append my email header and all to the file pipe.php. So I know postfix was piping it, but when I put in the quotes it says it's going but it's not according to my script.

  Read the article

• Combo ports and SFP

  - by Tahir

  I have Netgear GSM7324s prosafe switch. Switch has 24x1G ports. 4 ports are labeled as combo ports while 2 are labeled as SFP ports. I connected 2 PCs (each having 1gig and 10Gig NICs), with the switch using 1 & 10 Gig cables. Whenever, I ping the PCs the pinging is not working. As soon as, I removed the 10G cables, the ping starts working. Can someone please explain that what's going on. Also it would be very helpful if you can tell me the concept of combo ports, SFP ports in easy words?

  Read the article

• How to disable mod_security2 rule (false positive) for one domain on centos 5

  - by nicholas.alipaz

  Hi I have mod_security enabled on a centos5 server and one of the rules is keeping a user from posting some text on a form. The text is legitimate but it has the words 'create' and an html <table> tag later in it so it is causing a false positive. The error I am receiving is below: [Sun Apr 25 20:36:53 2010] [error] [client 76.171.171.xxx] ModSecurity: Access denied with code 500 (phase 2). Pattern match "((alter|create|drop)[[:space:]]+(column|database|procedure|table)|delete[[:space:]]+from|update.+set.+=)" at ARGS:body. [file "/usr/local/apache/conf/modsec2.user.conf"] [line "352"] [id "300015"] [rev "1"] [msg "Generic SQL injection protection"] [severity "CRITICAL"] [hostname "www.mysite.com"] [uri "/node/181/edit"] [unique_id "@TaVDEWnlusAABQv9@oAAAAD"] and here is /usr/local/apache/conf/modsec2.user.conf (line 352) #Generic SQL sigs SecRule ARGS "((alter|create|drop)[[:space:]]+(column|database|procedure|table)|delete[[:space:]]+from|update.+set.+=)" "id:1,rev:1,severity:2,msg:'Generic SQL injection protection'" The questions I have are: What should I do to "whitelist" or allow this rule to get through? What file do I create and where? How should I alter this rule? Can I set it to only be allowed for the one domain, since it is the only one having the issue on this dedicated server or is there a better way to exclude table tags perhaps? Thanks guys

  Read the article

• Ubuntu server - Problem of routing

  - by Max

  Hi, I have setup a Ubuntu server with Ubuntu Enterprise Cloud. The server is connected to a private LAN with DHCP and Internet access (via a gateway). At first, the server was working fine. It can ping the internet. It can also ping other machine inside LAN. The problem happened after i let the machine idle for more than 1 hour. When I want to use the machine again, I can't ping the internet anymore. I can only ping the machine inside LAN. I try to ping the server from another machine and it's working. Then, i ssh into that server from another machine, and I found that I can ping the internet from that server. It seems that there are some problems in the routing table of this server. Can anyone help me on this? Thank you. Max

  Read the article

• Synaptics/usb mouse drivers data is invalid on win server 2003

  - by the wonderer

  Have just installed windows server 2003 image onto an HP laptop. Cannot get the mouse drivers to work. Have the correct drivers because I've extracted them out of a working PC (exact same model). I am always getting "Data is invalid". This is the synaptics touchpad drivers. Does anyone know how to fix this/ workaround to get mouse working? I have heard it may have something to do with permissions in the registry?

  Read the article

• Editing .bash_profile file not taking effect

  - by Sandeepan Nath

  I need to put export PATH=$PATH:/opt/lampp/bin to my ~/.bash_profile file so that mysql from command line works on my system. Please check mysql command line not working for further details on that. I am working on a fedora system and logged in as root user. If I run locate .bash_profile then I get these:- /etc/skel/.bash_profile /home/sam/.bash_profile /home/sohil/.bash_profile /home/windows/.bash_profile /root/.bash_profile So, I modified the /root/.bash_profile file like this:- from PATH=$PATH:$HOME/bin export PATH to PATH=$PATH:/opt/lampp/bin export PATH But, still the change is not taking effect - Opening a new console and running mysql again says bash: mysql: command not found. However running export PATH=$PATH:/opt/lampp/bin in console makes it work for that session. So, I am doing something wrong with the .bash_profile file. May be editing incorrect one or doing the edit incorrectly.

  Read the article

• Blue screen error code 1000008e

  - by Kas

  I'm getting blue screens, mostly when trying to boot a program that required a lot of memory (games, photo editing software.) So far I've only managed to catch one set of error codes: BCCode: 1000008e BCP1: C0000005 BCP2: ADA393BA BCP3: E9BCEBC4 BCP4: 00000000 OS Version: 6_0_6002 Service Pack: 2_0 Product: 768_1 It's on a Sony VAIO Laptop VGN FW-41E, Vista OS service pack 2. Besides these codes it lists two 'temporary' files that were related with this crash: ...AppData\Local\Temp\WER-134925-0.sysdata.xml ...AppData\Local\Temp\WERDA66.tmp.version.txt When I googled these files some site said it was linked to a worm called 'yodo', but virus scans don't return any results (hitman pro, malware bytes, avast antivirus all turn up empty). Upon further searching about this yodo worm, I came across security stronghold where someone posted they had acquired this worm when downloading access and excel templates. Now, I actually did download templates for the same programs, they might have been the same, they may be related or I might be grasping at straws here. I have not noticed any issues other in performance as of late, just BSOD's when I start software that requires some memory, but I never had issues with these exact same programs before. Help and/or hints are required on how to actually figure out what's the root of this BSOD issue and how can I fix it. Do you reckon it's actually a virus? What program should be able to remove YODO worm stuff?

  Read the article

• Strange behaviour when creating/deleting subdomains

  - by Saif Bechan

  This can be a DNS cache issue from my local machine, but I am not sure. This is what happens. I have a domain that does not use wildcard subdomains, so they have to be created. Without creating the domain, and I point my browser to test.domain.com, I get a page server not found. Now when I create the subdomain, I keep getting the same problem. Now when I first create the domain, without ever visiting the page, I get the normal page, but now when I delete the subdomain, it never goes away. Can this be a DNS cache issue, I am working on a shared environment, maybe the router has a cache but I doubt that. Can this have something to do with my setup. I have tried to use the Google DNS hosting, but this gives me the same results. I have also tried some tools that clear my local DNS cache, they were some add-ons for FireFox. Anyone have any ideas what can be the problem. Are there any tests I can do to see if there is some kind of cache between me and the server.

  Read the article

• Jobs with anacron won't run

  - by mareser

  I would like to run two bash scripts daily using anacron in order to backup some data. Unfortunately I can't figure out why said scripts are not executed. For test purposes I let cron execute the scripts and it worked fine. cat /etc/anacrontab gives # /etc/anacrontab: configuration file for anacron # See anacron(8) and anacrontab(5) for details. SHELL=/bin/sh PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin # These replace cron's entries 1 5 cron.daily nice run-parts --report /etc/cron.daily 7 10 cron.weekly nice run-parts --report /etc/cron.weekly @monthly 15 cron.monthly nice run-parts --report /etc/cron.monthly 1 5 TB_bak /bin/sh /home/vasco2/Dropbox/Scripts/backup_TB.sh 1 5 key_db_bak /bin/sh /home/vasco2/Dropbox/Scripts/bak_key_db.sh The output of ls ~/Dropbox/Scripts/ is backup_TB.sh bak_key_db.sh I use Linux Mint Katya. uname -a gives Linux vasco2 2.6.38-8-generic-pae #42-Ubuntu SMP Mon Apr 11 05:17:09 UTC 2011 i686 i686 i386 GNU/Linux I would be very happy if somebody could point me in the right direction on why those scripts won't get executed. P.S.: There is no anacron tag on superuser.com. Maybe somebody wants to change that.

  Read the article

• javac compiler throwing error in CentOS 5.7

  - by Julio Menendez

  I'm trying to install Red5 on a vps running CentOS 5.7 in MediaTemple using this how-to (dv):Install Red5 Media Server but on step 7 I get this error: BUILD FAILED /usr/local/red5/build.xml:217: The following error occurred while executing this line: /usr/local/red5/build.xml:238: Error running /usr/lib/jvm/java-1.6.0-openjdk-1.6.0.0.x86_64/bin/javac compiler Any idea how to fix it? Already Google and several users have had this same issue but none posted the solution or they never solved. UPDATE: Some more details: running ant -v dist shows that is a memory problem: Caused by: java.io.IOException: Cannot run program "/usr/lib/jvm/java-1.6.0-openjdk-1.6.0.0.x86_64/bin/javac": java.io.IOException: error=12, Cannot allocate memory at java.lang.ProcessBuilder.start(ProcessBuilder.java:475) at java.lang.Runtime.exec(Runtime.java:610) at org.apache.tools.ant.taskdefs.Execute$Java13CommandLauncher.exec(Execute.java:862) at org.apache.tools.ant.taskdefs.Execute.launch(Execute.java:481) at org.apache.tools.ant.taskdefs.Execute.execute(Execute.java:495) at org.apache.tools.ant.taskdefs.compilers.DefaultCompilerAdapter.executeExternalCompile(DefaultCompilerAdapter.java:522) ... 32 more Caused by: java.io.IOException: java.io.IOException: error=12, Cannot allocate memory at java.lang.UNIXProcess.<init>(UNIXProcess.java:164) at java.lang.ProcessImpl.start(ProcessImpl.java:81) at java.lang.ProcessBuilder.start(ProcessBuilder.java:468) ... 37 more and I defined _JAVA_OPTIONS="-Xms64m -Xmx128m" and export ANT_OPTIONS=-Xmx128m and I tried with Xmx512m in both cases, no luck. Thanks!

  Read the article

• PHP include() through HTTP makes Apache time out

  - by Adam Interact

  I have a problem with ExpressionEngine2 after moving from an old server to WHM/cPanel running on CentOS6.4. Simple test code to reproduce that issue: <?php $protocol = strpos(strtolower($_SERVER['SERVER_PROTOCOL']),'https') === FALSE ? 'http' : 'https'; $host = $_SERVER['HTTP_HOST']; include($protocol . '://' . $host . '/header.html'); ?> <p> Main text...</p> <?php include($protocol . '://' . $host . '/footer.html'); ?> Where header.html looks like <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> <title>Untitled Document</title> </head> <body> and footer.html looks like: </body> </html> Creates Apache time out: Warning: include(http://www.domain.com/header.html) [function.include]: failed to open stream: Connection timed out in /home/domain/public_html/test/index.php on line 5 Warning: include() [function.include]: Failed opening 'http://www.domain.com/header.html' for inclusion (include_path='.:/usr/lib/php:/usr/local/lib/php') in /home/domain/public_html/test/index.php on line 5 Main text... Warning: include(http://www.domain.com/footer.html) [function.include]: failed to open stream: Connection timed out in /home/domain/public_html/test/index.php on line 12 Warning: include() [function.include]: Failed opening 'http://www.domain.com/footer.html' for inclusion (include_path='.:/usr/lib/php:/usr/local/lib/php') in /home/domain/public_html/test/index.php on line 12 Any clue what can be wrong with Apache or PHP configuration? Thanks

  Read the article

• install zenoss on ubuntu, raise No valid ZENHOME error

  - by bxshi

  I've added an user with name zenoss, and set export ZENHOME=/usr/local/zenoss in ~/.bashrc under /home/zenoss, and when using echo $ZENHOME, it could show /usr/local/zenoss When install zenoss, I switched to zenoss and then run install.sh under zenoss-4.2.0/inst, when it tries to run Tests, the error occured. ------------------------------------------------------- T E S T S ------------------------------------------------------- Running org.zenoss.utils.ZenPacksTest Tests run: 3, Failures: 0, Errors: 3, Skipped: 0, Time elapsed: 0.045 sec <<< FAILURE! Running org.zenoss.utils.ZenossTest Tests run: 3, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.71 sec Results : Tests in error: testGetZenPack(org.zenoss.utils.ZenPacksTest): No valid ZENHOME could be found. testGetPackPath(org.zenoss.utils.ZenPacksTest): No valid ZENHOME could be found. testGetAllPacks(org.zenoss.utils.ZenPacksTest): No valid ZENHOME could be found. Tests run: 6, Failures: 0, Errors: 3, Skipped: 0 [INFO] ------------------------------------------------------------------------ [INFO] Reactor Summary: [INFO] [INFO] Zenoss Core ....................................... SUCCESS [27.643s] [INFO] Zenoss Core Utilities ............................. FAILURE [12.742s] [INFO] Zenoss Jython Distribution ........................ SKIPPED [INFO] ------------------------------------------------------------------------ [INFO] BUILD FAILURE [INFO] ------------------------------------------------------------------------ [INFO] Total time: 40.586s [INFO] Finished at: Wed Sep 26 15:39:24 CST 2012 [INFO] Final Memory: 16M/60M [INFO] ------------------------------------------------------------------------ [ERROR] Failed to execute goal org.apache.maven.plugins:maven-surefire-plugin:2.8:test (default-test) on project utils: There are test failures. [ERROR] [ERROR] Please refer to /home/zenoss/zenoss-4.2.0/inst/build/java/java/zenoss-utils/target/surefire-reports for the individual test results.

  Read the article

• odd system name showing up in terminal

  - by sam

  Ive been working on some command line stuff with an external developer through team viewer for work, to interact with th CL i use terminal on OSX, when working with the developer i was always watching what they were doing and i also have all the bash history. Usually upon opening terminal i get something like this Last login: Tue Sep 17 21:33:02 on ttys001 You have mail. unknown-5c:00:00:00:00:00:~ sam$ (note ive replaced some characters in the last line with 00) But today when i opened up terminal and i get this Last login: Mon Oct 21 16:49:35 on ttys000 You have mail. richies-ipad:~ sam$ Note it now says richies-ipad - any idea why this is ? I dont know any one called richie let alone let them have access to my machine. Is this something to be worried about - the fact that someone has enough access to change that ? Also what does the ttys001 part on the first line mean ?

  Read the article

• after redmine install i see only the filesystem

  - by derty

  After installing redmine, i cann only access the filesystem! I reinstalled redmine 2-3 times in different ways. Used this "how to"s: http://www.redmine.org/projects/redmine/wiki/HowTo_Install_Redmine_using_Debian_package http://www.redmine.org/projects/redmine/wiki/HowTo_Install_Redmine_210_on_Debian_Squeeze_with_Apache_Passenger http://beeznest.wordpress.com/2012/09/20/installing-redmine-2-1-on-debian-squeeze-with-apache-modpassenger/ the webserver of 10.0.0.14 is going to be behind a reverse apache proxy. but for know i'm working directly in the system. This change wouldn't be a problem. I use this on a bunch of other services. The Database does exist and i can enter it. The configuration file config/database.yml is set up right, with the data i use to enter as redmineuser. So does one have an idea why it is not working like i wish?

  Read the article

< Previous Page | 505 506 507 508 509 510 511 512 513 514 515 516  | Next Page >