Search Results

Search found 18096 results on 724 pages for 'order numbering'.

Page 509/724 | < Previous Page | 505 506 507 508 509 510 511 512 513 514 515 516  | Next Page >

• Consolidating Oracle E-Business Suite R12 on Oracle's SPARC SuperCluster

  - by Giri Mandalika

  An Optimized Solution for Oracle E-Business Suite (EBS) R12 12.1.3 is now available on oracle.com.     The Oracle Optimized Solution for Oracle E-Business Suite This solution was centered around the engineered system, SPARC SuperCluster T4-4. Check the business and technical white papers along with a bunch of relevant useful resources online at the above optimized solution page for EBS. What is an Optimized Solution? Oracle's Optimized Solutions are designed, tested and fully documented architectures that are tuned for optimal performance and availability. Optimized solutions are NOT pre-packaged, fully tuned, ready-to-install software bundles that can be downloaded and installed. An optimized solution is usually a well documented architecture that was thoroughly tested on a target platform. The technical white paper details the deployed application architecture along with various observations from installing the application on target platform to its behavior and performance in highly available and scalable configurations. Oracle E-Business Suite R12 Use Case Multiple E-Business Suite R12 12.1.3 application modules were tested in this optimized solution -- Financials (online - oracle forms & web requests), Order Management (online - oracle forms & web req uests) and HRMS (online - web requests & payroll batch). The solution will be updated with additional application modules, when they are available. Oracle Solaris Cluster is responsible for the high availability portion of the solution. Performance Data For the sake of completeness, test results were also documented in the optimized solution white paper. Those test results are mainly for educational purposes only. They give good sense of application behavior under the circumstances the application was tested. Since the major focus of the optimized solution is around highly available and scalable configurations, the application was configured to me et those criteria. Hence the documented test results are not directly comparable to any other E-Business Suite performance test results published by any vendor including Oracle. Such an attempt may lead to skewed, incorrect conclusions. Questions & Requests Feel free to direct your questions to the author of the white papers. If you are a potential customer who would like to test a specific E-Business Suite application module on any non-engineered syste m such as SPARC T4-X or engineered system such as SPARC SuperCluster, contact Oracle Solution Center.

  Read the article

• #SSAS #Tabular Workshop and Community Events in Netherlands and Denmark

  - by Marco Russo (SQLBI)

  Next week I will finally start the roadshow of the SSAS Tabular Workshop, a 2-day seminar about the new BISM Tabular model for Analysis Services that has been introduced in SQL Server 2012. During these roadshows, we always try to arrange some speeches at local community events in the evening - we already defined for Copenhagen, we have some logistic issue in Amsterdam that we're trying to solve. Here is the timetable: Netherlands SSAS Workshop in Amsterdam, NL – April 16-17, 2012 2-day seminar, I and Alberto will be the trainers for this event, register here We're trying to manage a Community event but we still don't have a confirmation, stay tuned        Denmark SSAS Workshop in Copenhagen, DK – April 26-27, 2012 2-day seminar, I and Alberto will be the trainers for this event, register here Community event on April 26, 2012 This event will run in Hellerup, at Microsoft venue All details available here: http://msbip.dk/events/26/msbip-mode-nr-5/ People from Sweden are welcome! Just register to this private group on LinkedIn in order to announce your presence, so we’ll know how many people will attend In community events we’ll deliver two speeches – here are the descriptions: Inside xVelocity (VertiPaq) PowerPivot and BISM Tabular models in Analysis Services share a great columnar-based database engine called xVelocity in-memory analytics engine (VertiPaq). If you want to improve performance and optimize memory used, you have to understand some basic principles about how this engine works, how data is compressed, and how you can design a data model for better optimization. Prepare yourself to change your mind. xVelocity optimization techniques might seem counterintuitive and are absolutely different than OLAP and SQL ones! Choosing between Tabular and Multidimensional You have a new project and you have to make an important decision upfront. Should you use Tabular or Multidimensional? It is not easy to answer, because sometime there is a clear choice, but most of the times both decisions might be correct, at least at the beginning. In this session we’ll help you making an informed decision, correctly evaluating pros and cons of each one according to common scenarios, considering both short-term and long-term consequences of your choice. I hope to meet many people in this first dates. We have many other events coming in May and June, including an online event (for US time zones), and you can also attend our PreCon Day at TechEd US in Orland (PRC06) or TechEd Europe in Amsterdam. I’ll be a good customer for airline companies in the next three months! I’m just sorry that I hadn’t time to write other articles in the last month, but I’m accumulating material that I will need to write down during some flight – stay tuned…

  Read the article

• NEW: Oracle Certification Exam Preparation Seminars

  - by Harold Green

  Hi Everyone, I am really excited about a new offering that we are announcing this week - Oracle Certification Exam Preparation Seminars. These are something that will make a big difference for many of you in your efforts to become certified and move your career forward. They are also something that have previously only been available (but very popular) to the limited number of customers who have attended our annual conferences in San Francisco (Oracle OpenWorld and JavaOne). These are the first in a series of offerings that we are releasing over the next few months. So for those of you either preparing or considering Oracle certification - keep watching here on the blog, Facebook, Twitter and the Oracle Certification website for additional announcements related to our most popular certification areas. Details of the new Exam Preparation Seminars are found below: NEW: ORACLE CERTIFICATION EXAM PREPARATION SEMINARS Becoming Oracle certified is a great way to build your career, gain additional credibility and improve your earning power. We know that the decision to become certified is not trivial. Our surveys indicate that people consider their time investment a critical factor in their decision to become certified. Your time is important. In order to help candidates maximize the efficiency of their study time we are releasing a new series of video-based seminars called Exam Preparation Seminars. These seminars are patterned after the extremely popular Exam Cram sessions that until now have only been available at our annual customer conferences (Oracle Open World and JavaOne). Beginning today they are now available to anyone, anywhere as a part of this Exam Prep Seminar series. Features: Fast-paced objective by objective review of the exam topics - led by top Oracle University instructors 24/7 access through Oracle University's training on demand platform. Ability to re-watch all or part of the the seminar. All the conveniences of video-based training: start, stop, fast-forward, skip, rewind, review. Tips that will help you better understand what you need to know to pass the exam. The Exam Preparation Seminars are meant to help anyone with a working knowledge of the technology get that extra boost to help them finalize their preparation, and will help anyone who wants a better understanding of the the depth and breadth of the exam topics and objectives. Benefits: Save time by understanding what you should study. Makes you efficient because you will understand the breadth and depth of each of the exam topics. Helps you create a better, more efficient study plan. Improves your confidence in your skills and ability to pass the certification exam. Exam Preparation Seminars are available individually, or in convenient Value Packages (which include the Exam Preparation Seminar, and an exam voucher which includes one free-retake if you need it). Currently we are releasing two seminars - one for DBA SQL and one for DBA Administration I. Additional offerings are in process. Find out more: General WEB: Oracle Certification Exam Preparation Seminars VIDEO: Exam Preparation Seminars Promo (1:27) Oracle Database Administration I (11g, 10g) VIDEO: Instructor Introduction (1:08) VIDEO: Sample Video (2:16) Oracle Database SQL VIDEO: Instructor Introduction (1:08) VIDEO: Sample Video (2:16)

  Read the article

• OpenGLES GLSL Shader attributes always bound to 0

  - by codemonkey

  So I have a very simple vertex shader as follows #version 120 attribute vec3 position; attribute vec3 inColor; uniform mat4 mvp; varying vec3 fragColor; void main(void){ fragColor = inColor; gl_Position = mvp * vec4(position, 1.0); } Which I load, as well as the fragment shader: #version 120 varying vec3 fragColor; void main(void) { gl_FragColor = vec4(fragColor,1.0); } Which I then load, compile, and link to my shader program. I check for link status using glGetProgramiv(shaderProgram, GL_LINK_STATUS, &shaderSuccess); which returns GL_TRUE so I think its ok. However, when I query the active attributes and uniforms using #ifdef DEBUG int totalAttributes = -1; glGetProgramiv(shaderProgram, GL_ACTIVE_ATTRIBUTES, &totalAttributes); for(int i=0; i<totalAttributes; ++i) { int name_len=-1, num=-1; GLenum type = GL_ZERO; char name[100]; glGetActiveAttrib(shaderProgram, GLuint(i), sizeof(name)-1, &name_len, &num, &type, name ); name[name_len] = 0; GLuint location = glGetAttribLocation(shaderProgram, name); fprintf(stderr, "Attribute %s is bound at %d\n", name, location); } int totalUniforms = -1; glGetProgramiv(shaderProgram, GL_ACTIVE_UNIFORMS, &totalUniforms); for(int i=0; i<totalUniforms; ++i) { int name_len=-1, num=-1; GLenum type = GL_ZERO; char name[100]; glGetActiveUniform(shaderProgram, GLuint(i), sizeof(name)-1, &name_len, &num, &type, name ); name[name_len] = 0; GLuint location = glGetUniformLocation(shaderProgram, name); fprintf(stderr, "Uniform %s is bound at %d\n", name, location); } #endif I get: Attribute inColor is bound at 0 Attribute position is bound at 1 Uniform mvp is bound at 0 Which leads to failure when trying to use the shader to render the objects. I have tried switching the order of declaration of position & inColor, but still, only position is bound with the other two giving 0 Can someone please explain why this is happening? Thanks

  Read the article

• Function Folding in #PowerQuery

  - by Darren Gosbell

  Originally posted on: http://geekswithblogs.net/darrengosbell/archive/2014/05/16/function-folding-in-powerquery.aspxLooking at a typical Power Query query you will noticed that it's made up of a number of small steps. As an example take a look at the query I did in my previous post about joining a fact table to a slowly changing dimension. It was roughly built up of the following steps: Get all records from the fact table Get all records from the dimension table do an outer join between these two tables on the business key (resulting in an increase in the row count as there are multiple records in the dimension table for each business key) Filter out the excess rows introduced in step 3 remove extra columns that are not required in the final result set. If Power Query was to execute a query like this literally, following the same steps in the same order it would not be overly efficient. Particularly if your two source tables were quite large. However Power Query has a feature called function folding where it can take a number of these small steps and push them down to the data source. The degree of function folding that can be performed depends on the data source, As you might expect, relational data sources like SQL Server, Oracle and Teradata support folding, but so do some of the other sources like OData, Exchange and Active Directory. To explore how this works I took the data from my previous post and loaded it into a SQL database. Then I converted my Power Query expression to source it's data from that database. Below is the resulting Power Query which I edited by hand so that the whole thing can be shown in a single expression: let     SqlSource = Sql.Database("localhost", "PowerQueryTest"),     BU = SqlSource{[Schema="dbo",Item="BU"]}[Data],     Fact = SqlSource{[Schema="dbo",Item="fact"]}[Data],     Source = Table.NestedJoin(Fact,{"BU_Code"},BU,{"BU_Code"},"NewColumn"),     LeftJoin = Table.ExpandTableColumn(Source, "NewColumn"                                   , {"BU_Key", "StartDate", "EndDate"}                                   , {"BU_Key", "StartDate", "EndDate"}),     BetweenFilter = Table.SelectRows(LeftJoin, each (([Date] >= [StartDate]) and ([Date] <= [EndDate])) ),     RemovedColumns = Table.RemoveColumns(BetweenFilter,{"StartDate", "EndDate"}) in     RemovedColumns If the above query was run step by step in a literal fashion you would expect it to run two queries against the SQL database doing "SELECT * …" from both tables. However a profiler trace shows just the following single SQL query: select [_].[BU_Code],     [_].[Date],     [_].[Amount],     [_].[BU_Key] from (     select [$Outer].[BU_Code],         [$Outer].[Date],         [$Outer].[Amount],         [$Inner].[BU_Key],         [$Inner].[StartDate],         [$Inner].[EndDate]     from [dbo].[fact] as [$Outer]     left outer join     (         select [_].[BU_Key] as [BU_Key],             [_].[BU_Code] as [BU_Code2],             [_].[BU_Name] as [BU_Name],             [_].[StartDate] as [StartDate],             [_].[EndDate] as [EndDate]         from [dbo].[BU] as [_]     ) as [$Inner] on ([$Outer].[BU_Code] = [$Inner].[BU_Code2] or [$Outer].[BU_Code] is null and [$Inner].[BU_Code2] is null) ) as [_] where [_].[Date] >= [_].[StartDate] and [_].[Date] <= [_].[EndDate] The resulting query is a little strange, you can probably tell that it was generated programmatically. But if you look closely you'll notice that every single part of the Power Query formula has been pushed down to SQL Server. Power Query itself ends up just constructing the query and passing the results back to Excel, it does not do any of the data transformation steps itself. So now you can feel a bit more comfortable showing Power Query to your less technical Colleagues knowing that the tool will do it's best fold all the  small steps in Power Query down the most efficient query that it can against the source systems.

  Read the article

• Quick run through of the WP7 Developer Tools January 2011

  - by mbcrump

  In case you haven’t heard the latest WP7 Developers Tool update was released yesterday and contains a few goodies. First you need to go and grab the bits here. You can install them in any order, but I installed the WindowsPhoneDeveloperResources_en-US_Patch1.msp first. Then the VS10-KB2486994-x86.exe. They install silently. In other words, you would need to check Programs and Features and look in Installed Updates to see if they installed successfully. Like the screenshot below: Once you get them installed you can try out a few new features. Like Copy and Paste. Just fire up your application and put a TextBox on it and Select the Text and you will have the option highlighted in red above the text. Once you select it you will have the option to paste it. (see red rectangle below). Another feature is the Windows Phone Capability Detection Tool – This tool detects the phone capabilities used by your application. This will prevent you from submitting an app to the marketplace that says it uses x feature but really does not. How do you use it? Well navigate out to either directory: %ProgramFiles%\Microsoft SDKs\Windows Phone\v7.0\Tools\CapDetect %ProgramFiles (x86)%\Microsoft SDKs\Windows Phone\v7.0\Tools\CapDetect and run the following command: CapabilityDetection.exe Rules.xml YOURWP7XAPFILEOUTPUTDIRECTORY So, in my example you will see my app only requires the ID_CAP_MICROPHONE. Let’s see what the WmAppManifest.xml says in our WP7 Project: Whoa! That’s a lot of extra stuff we don’t need. We can delete unused capabilities safely now. Some of the other fixes are: (Copied straight from Microsoft) Fixes a text selection bug in pivot and panorama controls. In applications that have pivot or panorama controls that contain text boxes, users can unintentionally change panes when trying to copy text. To prevent this problem, open your application, recompile it, and then resubmit it to the Windows Phone Marketplace. Windows Phone Connect Tool – Allows you to connect your phone to a PC when Zune® software is not running and debug applications that use media APIs. For more information, see How to: Use the Connect Tool. Updated Bing Maps Silverlight Control – Includes improvements to gesture performance when using Bing™ Maps Silverlight® Control. Windows Phone Developer Tools Fix allowing deployment of XAP files over 64 MB in size to physical phone devices for testing and debugging. That’s pretty much it. Thanks again for reading my blog!  Subscribe to my feed CodeProject

  Read the article

• Enterprise Service Bus (ESB): Important architectural piece to a SOA or is it just vendor hype?

  Is an Enterprise Service Bus (ESB) an important architectural piece to a Service-Oriented Architecture (SOA), or is it just vendor hype in order to sell a particular product such as SOA-in-a-box? According to IBM.com, an ESB is a flexible connectivity infrastructure for integrating applications and services; it offers a flexible and manageable approach to service-oriented architecture implementation. With this being said, it is my personal belief that ESBs are an important architectural piece to any SOA. Additionally, generic design patterns have been created around the integration of web services in to ESB regardless of any vendor. ESB design patterns, according to Philip Hartman, can be classified in to the following categories: Interaction Patterns: Enable service interaction points to send and/or receive messages from the bus Mediation Patterns: Enable the altering of message exchanges Deployment Patterns: Support solution deployment into a federated infrastructure Examples of Interaction Patterns: One-Way Message Synchronous Interaction Asynchronous Interaction Asynchronous Interaction with Timeout Asynchronous Interaction with a Notification Timer One Request, Multiple Responses One Request, One of Two Possible Responses One Request, a Mandatory Response, and an Optional Response Partial Processing Multiple Application Interactions Benefits of the Mediation Pattern: Mediator promotes loose coupling by keeping objects from referring to each other explicitly, and it lets you vary their interaction independently Design an intermediary to decouple many peers Promote the many-to-many relationships between interacting peers to “full object status” Examples of Interaction Patterns: Global ESB: Services share a single namespace and all service providers are visible to every service requester across an entire network Directly Connected ESB: Global service registry that enables independent ESB installations to be visible Brokered ESB: Bridges services that are reluctant to expose requesters or providers to ESBs in other domains Federated ESB: Service consumers and providers connect to the master or to a dependent ESB to access services throughout the network References: Mediator Design Pattern. (2011). Retrieved 2011, from SourceMaking.com: http://sourcemaking.com/design_patterns/mediator Hartman, P. (2006, 24 1). ESB Patterns that "Click". Retrieved 2011, from The Art and Science of Being an IT Architect: http://artsciita.blogspot.com/2006/01/esb-patterns-that-click.html IBM. (2011). WebSphere DataPower XC10 Appliance Version 2.0. Retrieved 2011, from IBM.com: http://publib.boulder.ibm.com/infocenter/wdpxc/v2r0/index.jsp?topic=%2Fcom.ibm.websphere.help.glossary.doc%2Ftopics%2Fglossary.html Oracle. (2005). 12 Interaction Patterns. Retrieved 2011, from Oracle® BPEL Process Manager Developer's Guide: http://docs.oracle.com/cd/B31017_01/integrate.1013/b28981/interact.htm#BABHHEHD

  Read the article

• Ubuntu 12.04.3 Graphics Issues: Broken Pipes, Reinstalled Xorg and Bumblebee

  - by user190488

  It seems I have a problem, and am only making it worse by following what I find online. I have a new Asus N550JV-D71 (not sure about the part after the dash, though I definitely know it includes 71). I decided to downgrade Windows 8 to 7, then dual boot Ubuntu 12.04 with it (there were issues with Windows 8, and I had a Windows 7 disk handy). It did work and, after installing Bumblebee in tty (because it wouldn't boot when it was first installed), it worked marvelously for a little less than a week. However, I restarted it last night and got the Could not write bytes: Broken pipes error. (I see it's a very common error, but I've looked at the majority of the suggested Similar Questions already.) I followed what I could find online, followed those instructions (making sure to not install any sort of graphics drivers other than what Bumblebee provides), and it just seems to go further and further downhill. I'm afraid I didn't write the exact steps to get to this point (it was late by the time I gave up the night before), but it involved reinstalling lightdm, xorg (and xserver?), and Bumblebee. I then changed the Bumblebee.conf file so that Device=nvidia. I'm pretty new to Linux in general (I've used it since 10.04, but I hadn't had issues up until this computer, so it let me stay a newbie), so I'm not exactly sure what log files to look at to find the errors to look up. However, I did look at lshw and noticed that displays was marked as unassigned. Also, if I try to start lightdm using the command line, it always stops at Stopping Mount network filesystems. I should note that there isn't an xorg.conf file, and no .Xauthority. I would really, really prefer not to reinstall 12.04 if possible. I managed to get grub to display only a short time ago, and I can't boot to the dvd drive unless I go into the BIOS settings and manually change the boot order (that was an issue from the beginning, before the Ubuntu install), and getting into those settings often means rebooting several times due to the fact that the window to get to it is extremely small. I have most of what I need backed up, however, in case it does get to that point. If I really have to, I can just use the latest Ubuntu version instead of the LTS, but the reason I chose 12.04 in the first place is because I need something stable-ish, and Windows isn't suitable to what I need to do. I should note that the reason I restarted last night in the first place was that it wasn't charging the battery, and the wifi kept on going out. Hardware: Nvidia GeForce GT 750M Intel HD graphics 4600

  Read the article

• Walmart's Mobile Self-Checkout

  - by David Dorf

  Reuters recently reported that Walmart was testing an iPhone-based self-checkout at a store near its headquarters.  Consumers scan items as they're placed in the physical basket, then the virtual basket is transferred to an existing self-checkout station where payment is tendered.  A very solid solution, but not exactly original. Before we go further, let's look at the possible cost savings for Walmart.  According to the article: Pushing more shoppers to scan their own items and make payments without the help of a cashier could save Wal-Mart millions of dollars, Chief Financial Officer Charles Holley said on March 7. The company spends about $12 million in cashier wages every second at its Walmart U.S. stores. Um, yeah. Using back-of-the-napkin math, I calculated Walmart's cashiers are making $157k per hour.  A more accurate statement would be saving $12M per year for each second saved on the average transaction time.  So if this self-checkout approach saves 2 seconds per transaction on average, Walmart would save $24M per year on labor.  Maybe.  Sometimes that savings will be used to do other tasks in the store, so it may not directly translate to less employees. When I saw this approach demonstrated in Sweden, there were a few differences, which may or may not be in Walmart's plans.  First, the consumers were identified based on their loyalty card.  In order to offset the inevitable shrink, retailers need to save on labor but also increase basket size, typically via in-aisle promotions.  As they scan items, retailers should target promos, and that's easier to do if you know some shopping history.  Last I checked, Walmart had no loyalty program. Second, at the self-checkout station consumers were randomly selected for an audit in which they must re-scan all the items just like you do at a typical self-checkout.  If you were found to be stealing, your ability to use the system can be revoked.  That's a tough one in the US, especially when the system goes wrong, either by mistake or by lying.  At least in my view, the Swedes are bit more trustworthy than the people of Walmart. So while I think the idea of mobile self-checkout has merit, perhaps its not right for Walmart.

  Read the article

• ArchBeat Facebook Friday: Top 10 Shared Links - May 23-29, 2014

  - by OTN ArchBeat

  Among the 5,144 fans of the OTN ArchBeat Facebook Page the following Top 10 items were the most popular over the last seven days, May 23-29, 2014. GlassFish/Java EE Community Open Forum Today! | Reza Rahman Have questions about Glassfish? Java EE/GlassFish evangelist Reza Rahman has answers, and you can pick his brain tomorrow during an online forum organized by the London Glassfish User Group and C2B2. The event is free, but you must register in order to participate. Click the link for more information. Twitter Tuesday - Top 10 @ArchBeat Tweets - May 20-26, 2014 The top 10 @OTNArchBeat tweets for the week of May 20-26, 2014. Topics covered include ADF, Cloud, GoldenGate, KScope14, OBIEE, ODI, WebLogic, WebCenter, and more. FrameworkFolders Support has come to Oracle WebCenter Portal | JayJay Zheng Interested in working with Framework Folders in Oracle WebCenter Portal? Oracle ACE JayJay Zheng reviews the essentials. Video: Programming Best Practices - ADF Business Components | Frank Nimphius Frank Nimphius discusses best practices and recommendations for ADF Business Components in the latest video from ADF Architecture TV. Video: Kscope 2014 Preview: Data Modeling and Moving Meditation with Kent Graziano For your mind and your body! Oracle ACE Director Kent Graziano previews his Kscope 2014 data modeling presentations and the early morning Chi Gung sessions he will once again lead for Kscope attendees. OAG and OES Integration for Web API Security: skin and guts | Andre Correa A-Team architect Andre Correa's post examines a strategy for web API security that uses OAG (Oracle API Gateway) and OES (Oracle Entitlements Server). Getting Started with Coherence*Web in WebLogic Server 12.1.2 | Tim Middleton Solution architect Tim Middleton shows you how to configure Coherence*Web in WebLogic Server 12.1.2 and deploy a basic web application. SOA and Business Processes: You are the Process! Part of the 13-part "Industrial SOA" article series, this article looks at best practices for modeling and managing effective business processes. Authentication in Oracle Identity Federation/ IdP | Damien Carru Damien Carru discuss authentication when OIF acts as an IdP and how the server can be configured to use specific OAM Authentication Schemes to challenge the user. Caveats on Using WebLogic Server with JDK7 | JayJay Zheng Quick tech tips from Oracle ACE JayJay Zheng.

  Read the article

• Blender to 3ds max to cal3d format

  - by Kaliber64

  There are quite a few questions on cal3d but they are old and don't apply anymore. In Blender(must be 2.49a for python script to work!!!): I have a scene with 7 meshes, 1 armature, 10 bones. I tried going to one mesh to simplify it but doesn't change anything. I found a small blend file that was used for cal3d and it exported just fine. So I tried to copy it's setup with no success. EDIT*8/13/2012 In the last week here is what I have found so far. I made the mesh in the newest blender(2.62?) and exported it to import it in the old one(2.49a). Did an animation in the old one because importing new blend files to old blenders, its just said it would lose keyframe data and all was good. And then you get the last problem of it not exporting meshes. BUT I found that meshes made in the old one export regardless. I can't find any that won't export. So if I used the old blender to remake my model I could get it to export :) At this point I found a modified release of cal3d (because the most core model variable would not initiate as I made a really small test subject in old blender instead of remaking my big one which took 4 hours.) which fixes the morph objects and adds what cal3d left off with. Under their license they have to release the modification but it has no documentation so I have to figure it out on my own. Its mostly the same. But with this lib it came with a 3ds max exporter. My question now is how do I transfer armature and mesh information from blender to 3ds max in order to export into cal3d format. Every time I try the models are see through and small and there are no bones. The formats I have tried to import are .3ds .obj(mesh only) and COLLADA. In all of them the mesh is invisible and no bones. It says the default texture is on so I should be able to see it. All the vertices are present I found a vertex highlighter so I can see those. If any of this is confusing let me know so I can clear it up. Its late .<=sleep.

  Read the article

• Why can't a blendShader sample anything but the current coordinate of the background image?

  - by Triynko

  In Flash, you can set a DisplayObject's blendShader property to a pixel shader (flash.shaders.Shader class). The mechanism is nice, because Flash automatically provides your Shader with two input images, including the background surface and the foreground display object's bitmap. The problem is that at runtime, the shader doesn't allow you to sample the background anywhere but under the current output coordinate. If you try to sample other coordinates, it just returns the color of the current coordinate instead, ignoring the coordinates you specified. This seems to occur only at runtime, because it works properly in the Pixel Bender toolkit. This limitation makes it impossible to simulate, for example, the Aero Glass effect in Windows Vista/7, because you cannot sample the background properly for blurring. I must mention that it is possible to create the effect in Flash through manual composition techniques, but it's hard to determine when it actually needs updated, because Flash does not provide information about when a particular area of the screen or a particular display object needs re-rendered. For example, you may have a fixed glass surface with objects moving underneath it that don't dispatch events when they move. The only alternative is to re-render the glass bar every frame, which is inefficient, which is why I am trying to do it through a blendShader so Flash determines when it needs rendered automatically. Is there a technical reason for this limitation, or is it an oversight of some sort? Does anyone know of a workaround, or a way I could provide my manual composition implementation with information about when it needs re-rendered? The limitation is mentioned with no explanation in the last note in this page: http://help.adobe.com/en_US/as3/dev/WSB19E965E-CCD2-4174-8077-8E5D0141A4A8.html It says: "Note: When a Pixel Bender shader program is run as a blend in Flash Player or AIR, the sampling and outCoord() functions behave differently than in other contexts.In a blend, a sampling function will always return the current pixel being evaluated by the shader. You cannot, for example, use add an offset to outCoord() in order to sample a neighboring pixel. Likewise, if you use the outCoord() function outside a sampling function, its coordinates always evaluate to 0. You cannot, for example, use the position of a pixel to influence how the blended images are combined."

  Read the article

• Why is Double.Parse so slow?

  - by alexhildyard

  I was recently investigating a bottleneck in one of my applications, which read a CSV file from disk using a TextReader a line at a time, split the tokens, called Double.Parse on each one, then shunted the results into an object list. I was surprised to find it was actually the Double.Parse which seemed to be taking up most of the time.Googling turned up this, which is a little unfocused in places but throws out some excellent ideas:It makes more sense to work with binary format directly, rather than coerce strings into doublesThere is a significant performance improvement in composing doubles directly from the byte stream via long intermediariesString.Split is inefficient on fixed length recordsIn fact it turned out that my problem was more insidious and also more mundane -- a simple case of bad data in, bad data out. Since I had been serialising my Doubles as strings, when I inadvertently divided by zero and produced a "NaN", this of course was serialised as well without error. And because I was reading in using Double.Parse, these "NaN" fields were also (correctly) populating real Double objects without error. The issue is that Double.Parse("NaN") is incredibly slow. In fact, it is of the order of 2000x slower than parsing a valid double. For example, the code below gave me results of 357ms to parse 1000 NaNs, versus 15ms to parse 100,000 valid doubles.            const int invalid_iterations = 1000;            const int valid_iterations = invalid_iterations * 100;            const string invalid_string = "NaN";            const string valid_string = "3.14159265";            DateTime start = DateTime.Now;                        for (int i = 0; i < invalid_iterations; i++)            {                double invalid_double = Double.Parse(invalid_string);            }            Console.WriteLine(String.Format("{0} iterations of invalid double, time taken (ms): {1}",                invalid_iterations,                ((TimeSpan)DateTime.Now.Subtract(start)).Milliseconds            ));            start = DateTime.Now;            for (int i = 0; i < valid_iterations; i++)            {                double valid_double = Double.Parse(valid_string);            }            Console.WriteLine(String.Format("{0} iterations of valid double, time taken (ms): {1}",                valid_iterations,                ((TimeSpan)DateTime.Now.Subtract(start)).Milliseconds            )); I think the moral is to look at the context -- specifically the data -- as well as the code itself. Once I had corrected my data, the performance of Double.Parse was perfectly acceptable, and while clearly it could have been improved, it was now sufficient to my needs.

  Read the article

• how do I set quad buffering with jogl 2.0

  - by tony danza

  I'm trying to create a 3d renderer for stereo vision with quad buffering with Processing/Java. The hardware I'm using is ready for this so that's not the problem. I had a stereo.jar library in jogl 1.0 working for Processing 1.5, but now I have to use Processing 2.0 and jogl 2.0 therefore I have to adapt the library. Some things are changed in the source code of Jogl and Processing and I'm having a hard time trying to figure out how to tell Processing I want to use quad buffering. Here's the previous code: public class Theatre extends PGraphicsOpenGL{ protected void allocate() { if (context == null) { // If OpenGL 2X or 4X smoothing is enabled, setup caps object for them GLCapabilities capabilities = new GLCapabilities(); // Starting in release 0158, OpenGL smoothing is always enabled if (!hints[DISABLE_OPENGL_2X_SMOOTH]) { capabilities.setSampleBuffers(true); capabilities.setNumSamples(2); } else if (hints[ENABLE_OPENGL_4X_SMOOTH]) { capabilities.setSampleBuffers(true); capabilities.setNumSamples(4); } capabilities.setStereo(true); // get a rendering surface and a context for this canvas GLDrawableFactory factory = GLDrawableFactory.getFactory(); drawable = factory.getGLDrawable(parent, capabilities, null); context = drawable.createContext(null); // need to get proper opengl context since will be needed below gl = context.getGL(); // Flag defaults to be reset on the next trip into beginDraw(). settingsInited = false; } else { // The following three lines are a fix for Bug #1176 // http://dev.processing.org/bugs/show_bug.cgi?id=1176 context.destroy(); context = drawable.createContext(null); gl = context.getGL(); reapplySettings(); } } } This was the renderer of the old library. In order to use it, I needed to do size(100, 100, "stereo.Theatre"). Now I'm trying to do the stereo directly in my Processing sketch. Here's what I'm trying: PGraphicsOpenGL pg = ((PGraphicsOpenGL)g); pgl = pg.beginPGL(); gl = pgl.gl; glu = pg.pgl.glu; gl2 = pgl.gl.getGL2(); GLProfile profile = GLProfile.get(GLProfile.GL2); GLCapabilities capabilities = new GLCapabilities(profile); capabilities.setSampleBuffers(true); capabilities.setNumSamples(4); capabilities.setStereo(true); GLDrawableFactory factory = GLDrawableFactory.getFactory(profile); If I go on, I should do something like this: drawable = factory.getGLDrawable(parent, capabilities, null); but drawable isn't a field anymore and I can't find a way to do it. How do I set quad buffering? If I try this: gl2.glDrawBuffer(GL.GL_BACK_RIGHT); it obviously doesn't work :/ Thanks.

  Read the article

• Design for an interface implementation that provides additional functionality

  - by Limbo Exile

  There is a design problem that I came upon while implementing an interface: Let's say there is a Device interface that promises to provide functionalities PerformA() and GetB(). This interface will be implemented for multiple models of a device. What happens if one model has an additional functionality CheckC() which doesn't have equivalents in other implementations? I came up with different solutions, none of which seems to comply with interface design guidelines: To add CheckC() method to the interface and leave one of its implementations empty: interface ISomeDevice { void PerformA(); int GetB(); bool CheckC(); } class DeviceModel1 : ISomeDevice { public void PerformA() { // do stuff } public int GetB() { return 1; } public bool CheckC() { bool res; // assign res a value based on some validation return res; } } class DeviceModel2 : ISomeDevice { public void PerformA() { // do stuff } public int GetB() { return 1; } public bool CheckC() { return true; // without checking anything } } This solution seems incorrect as a class implements an interface without truly implementing all the demanded methods. To leave out CheckC() method from the interface and to use explicit cast in order to call it: interface ISomeDevice { void PerformA(); int GetB(); } class DeviceModel1 : ISomeDevice { public void PerformA() { // do stuff } public int GetB() { return 1; } public bool CheckC() { bool res; // assign res a value based on some validation return res; } } class DeviceModel2 : ISomeDevice { public void PerformA() { // do stuff } public int GetB() { return 1; } } class DeviceManager { private ISomeDevice myDevice; public void ManageDevice(bool newDeviceModel) { myDevice = (newDeviceModel) ? new DeviceModel1() : new DeviceModel2(); myDevice.PerformA(); int b = myDevice.GetB(); if (newDeviceModel) { DeviceModel1 newDevice = myDevice as DeviceModel1; bool c = newDevice.CheckC(); } } } This solution seems to make the interface inconsistent. For the device that supports CheckC(): to add the logic of CheckC() into the logic of another method that is present in the interface. This solution is not always possible. So, what is the correct design to be used in such cases? Maybe creating an interface should be abandoned altogether in favor of another design?

  Read the article

• Why should I not do a masters degree

  - by aurel

  I have left university on July 2010 where I studied web design (as we all know you learn more by your self but that’s not the issue at the moment). Since then I have not managed to find a job (apart from a one month work experience), from the way things are going, and by taking into account the fact that all my university friends are in the same situation, I don’t think that I am going to find a job soon (within the industry) Now as we all do, even though I don’t have a job, I am still working on personal projects and try to keep up to date (I don’t need a job or uni to do this) – but I am thinking, because there is not work available, would it be worth going back to uni for a master degree? I know I don’t need it and I know that is unlikely that I will learn anything important, as I believe in self learning, and in most cases it is a lot more effective (but I have to say I don’t mind going back to school) The only reason I am thinking of doing the master is, (and this is where I need your help): If it takes me a year to get a job, then on the interview, would the employer think “what the hell did this guy do since he left university” – now if I go to university that would solve this problem. Or I’m I making up a problem that does not exist Plus, I know that employers need examples of sites that I have been working on, at the moment I only have 3 (as when working on personal projects, where their is not time limit I tend drag things in order to get them perfect, and they never get perfect) – so by going back to uni, then this problem maybe solved I said all this as I have read a lot about the fact that you don’t need to have a masters degree to work on web design market (and I totally agree) but considering my concern, the question is should I do a masters course to avoid just spending hours in my room working and learning in my own (but that it would be hard to convince employers that I was really learning in my room) Maybe because I’m still young age 22 not that old anyway :), but I don’t have the “dream” of being rich, so if I were to tell the truth I don’t really care of the fact that I don’t have a job (at the moment), because regardless, I am working on what I love every day, but I know that in the future when I will need the job I may find it harder to get one, if I neglect doing so now Every time I ask a question that I’m not sure about, I keep going on and on, but I really hope you get what I am trying to get across. By the way the course that I am looking at for a masters says that it would teach me how to do these: e-commerce e-government e-science e-learning I don’t know any of them, a part from e-commerce Thanks

  Read the article

• How to deal with malicious domain redirections?

  - by user359650

  It is possible for anybody to buy a domain name containing negative terms and point it to someone's website in order to damage their reputation. For instance someone could buy the domain child-pornography.com and point it to the address 64.34.119.12 which is the address behind stackoverflow.com and people navigating to the domain in question would end up visualizing content from StackExchange which would be detrimental to StackExchange's image. To illustrate this, I added the entry 64.34.119.12 child-pornography.com to my /etc/hosts file and tested. Here is what I obtained: I personally found this user experience terrible as someone could think that Stack Exchange are in favor of child pornography and awaiting support from the community to create a Q&A site about it. I tested with other websites and experienced other behaviors that I would categorize as follows: 1 - Useful 404 page (happens with stackoverflow.com): For me the worst way of handling this as the image of the targeted website is directly associated with the offending domain. The more useful the 404 page, the bigger the impression that the targeted website would be willing to help with child pornography. 2 - Redirection (happens with microsoft.com): For instance when accessing child-pornography.com you get redirected to www.microsoft.com. It isn't as bad as above as the offending domain name never appears alongside the targeted website's content, but still bad in my opinion as it gives the impression the targeted website bought the offending domain and redirected it to their website to get more traffic. 3 - Server error (happens with lemonde.fr): You get an error from the webserver which page doesn't contain any content that can be associated with the targeted website (e.g. default Apache 404 page, completely blank page). I believe that is good as the identify of the targeted website isn't revealed. Above are the various behaviors I experienced, but I also thought about a fourth way of dealing with this which is described below. 4 - Disclaimer page (haven't found any website implementing that technique): Display a message such as : "You ended here because someone bought and linked the child-pornography.com domain to our website. We do not own this domain and do not associate ourselves with it. This request has been logged by our servers and we will raise this issue with the competent authorities to have this domain taken down. If you want to access our website, please click here." The good thing about this method is that it can be implemented at application layer (good if you don't have control over web server which happens with some hosting solutions), allows you to protect yourself from any liability, and offer the visitor to be redirected to your own website. Which of the above options would you implement to deal with malicious domain linking (IMO only options 3 and 4 are worth considering) ?

  Read the article

• Why enumerator structs are a really bad idea (redux)

  - by Simon Cooper

  My previous blog post went into some detail as to why calling MoveNext on a BCL generic collection enumerator didn't quite do what you thought it would. This post covers the Reset method. To recap, here's the simple wrapper around a linked list enumerator struct from my previous post (minus the readonly on the enumerator variable): sealed class EnumeratorWrapper : IEnumerator<int> { private LinkedList<int>.Enumerator m_Enumerator; public EnumeratorWrapper(LinkedList<int> linkedList) { m_Enumerator = linkedList.GetEnumerator(); } public int Current { get { return m_Enumerator.Current; } } object System.Collections.IEnumerator.Current { get { return Current; } } public bool MoveNext() { return m_Enumerator.MoveNext(); } public void Reset() { ((System.Collections.IEnumerator)m_Enumerator).Reset(); } public void Dispose() { m_Enumerator.Dispose(); } } If you have a look at the Reset method, you'll notice I'm having to cast to IEnumerator to be able to call Reset on m_Enumerator. This is because the implementation of LinkedList<int>.Enumerator.Reset, and indeed of all the other Reset methods on the BCL generic collection enumerators, is an explicit interface implementation. However, IEnumerator is a reference type. LinkedList<int>.Enumerator is a value type. That means, in order to call the reset method at all, the enumerator has to be boxed. And the IL confirms this: .method public hidebysig newslot virtual final instance void Reset() cil managed { .maxstack 8 L_0000: nop L_0001: ldarg.0 L_0002: ldfld valuetype [System]System.Collections.Generic.LinkedList`1/Enumerator<int32> EnumeratorWrapper::m_Enumerator L_0007: box [System]System.Collections.Generic.LinkedList`1/Enumerator<int32> L_000c: callvirt instance void [mscorlib]System.Collections.IEnumerator::Reset() L_0011: nop L_0012: ret } On line 0007, we're doing a box operation, which copies the enumerator to a reference object on the heap, then on line 000c calling Reset on this boxed object. So m_Enumerator in the wrapper class is not modified by the call the Reset. And this is the only way to call the Reset method on this variable (without using reflection). Therefore, the only way that the collection enumerator struct can be used safely is to store them as a boxed IEnumerator<T>, and not use them as value types at all.

  Read the article

• OpenWorld in Small Bites

  - by Kathryn Perry

  Fifty thousand attendees -- that's bigger than the cities some of us live in. Monday morning it took 20 minutes to get from Hall D in Moscone North to a conference room in Moscone South -- the crowds were crushing! A great start to a great week! Larry is as big a name as ever on the program schedule and on the Moscone stage. People were packed in Hall D and clustered around every big screen TV. He stayed on script as he laid out Oracle's SaaS, PaaS, and IaaS strategies. Every seat in Chris Leone's Fusion Apps Cloud Overview was filled on Monday morning. Oracle employees who wanted to get in were turned away. And the same thing happened in the repeat session on Wednesday. Our newest suite of apps is hot! Speaking of hot, the weather was made to order. Then it turned very San Francisco-like on Wednesday afternoon. Downright cold for those who trusted SF temps to hold in the 80's. Who did you follow on Twitter during the conference? So many voices, opinions, and convos! Great combo of social media and sharp minds. Be sure to follow @larryellison, @stevenrmiranda, and @Oracle for updates and MyPOVs. Keywords for the Apps customers at the conference were cloud, mobile, and social. Every day, every session, every speaker. Wednesday afternoon, 4 pm at the Four Seasons hotel. A large roomful of analysts and influencers firing questions at a panel of eight Fusion customers. Steve Miranda moderating. Good energy and a great exchange of information and confidence. Word on the street is that OpenWorld has outgrown San Francisco -- but moving it seems unthinkable. The city isn't just a backdrop for an industry conference - it's a headliner right up there with Larry Ellison and Pearl Jam. As you can imagine, electrical outlets were in high demand at every venue. The most popular hotels and bars near Moscone designed their interiors around accessible electrical power strips. People are plenty willing to buy a drink while they grab a charge. Wednesday afternoon, 4 pm at the Four Seasons hotel. A large roomful of analysts and influencers firing questions at a panel of eight Fusion customers. Steve Miranda moderating. Good energy and a great exchange of information and confidence. Treasure Island in the dark. Eddy Vedder has an amazing voice! And Kings of Leon over delivered on people's expectations. It was cold. It was windy. It was very fun. One analyst said it's the best customer appreciation party in the industry. 

  Read the article

• Wrong statistics in AUX_STATS$ might puzzle the optimizer

  - by Mike Dietrich

  We do recommend the creation of System Statistics for quite a long time. Since Oracle 9i the optimizer works with a CPU and IO cost based model. And in order to give the optimizer some knowledge about the IO subsystem's performance and throughput - once System Statistics are collected - they'll get stored in AUX_STATS$. For this purpose in the old Oracle 9i days some default values had been defined - and you'll still find those defaults in Oracle Database 11g Release 2 in AUX_STATS$. But these old values don't reflect the performance of modern IO systems. So it might be a good best practice post upgrade to create fresh System Statistics if you haven't done this before.  You can collect System Statistics with: exec DBMS_STATS.GATHER_SYSTEM_STATS('start'); and end it later by executing: exec DBMS_STATS.GATHER_SYSTEM_STATS('stop'); You could also run DBMS_STATS.GATHER_SYSTEM_STATS('interval', interval=>N) instead where N is the number of minutes when statistics gathering is stopped automatically. Please make sure you'll do this on a real workload period. It won't make sense to gather these values while the database is in an idle state. You should do this ideally for several hours. It doesn't affect performance in a negative way as the values are anyway collected in V$SYSSTAT and V$SESSTAT. And in case you'd like to delete the stats and revert to the old default values you'd simply execute:exec DBMS_STATS.DELETE_SYSTEM_STATS; The tricky thing in Oracle Database 11.2 - and that's why I'm actually writing this blog post today - is bug9842771. This leads to wrong values in AUX_STATS$ for SREADTIM and MREADTIM by factor 1000 guiding the optimizer sometimes into the totally wrong directon. The workaround is to overwrite these values manually and divide them by 1000. Use the DBMS_STATS.SET_SYSTEM_STATS procedure. See this MOS Note:9842771.8 for the above bug for some further information. This issue is fixed in Oracle Database 11.2.0.3 and above. To get some background information about the statistics collected in please read this section in the Oracle Database 11.2 Performance Tuning Guide. And gathering System Statistics might have some implication if you have mixed workloads - and interacts with DB_FILE_MULTIBLOCK_READ_COUNT. For more information please read section 13.4.1.2.

  Read the article

• What algorithms can I use to detect if articles or posts are duplicates?

  - by michael

  I'm trying to detect if an article or forum post is a duplicate entry within the database. I've given this some thought, coming to the conclusion that someone who duplicate content will do so using one of the three (in descending difficult to detect): simple copy paste the whole text copy and paste parts of text merging it with their own copy an article from an external site and masquerade as their own Prepping Text For Analysis Basically any anomalies; the goal is to make the text as "pure" as possible. For more accurate results, the text is "standardized" by: Stripping duplicate white spaces and trimming leading and trailing. Newlines are standardized to \n. HTML tags are removed. Using a RegEx called Daring Fireball URLs are stripped. I use BB code in my application so that goes to. (ä)ccented and foreign (besides Enlgish) are converted to their non foreign form. I store information about each article in (1) statistics table and in (2) keywords table. (1) Statistics Table The following statistics are stored about the textual content (much like this post) text length letter count word count sentence count average words per sentence automated readability index gunning fog score For European languages Coleman-Liau and Automated Readability Index should be used as they do not use syllable counting, so should produce a reasonably accurate score. (2) Keywords Table The keywords are generated by excluding a huge list of stop words (common words), e.g., 'the', 'a', 'of', 'to', etc, etc. Sample Data text_length, 3963 letter_count, 3052 word_count, 684 sentence_count, 33 word_per_sentence, 21 gunning_fog, 11.5 auto_read_index, 9.9 keyword 1, killed keyword 2, officers keyword 3, police It should be noted that once an article gets updated all of the above statistics are regenerated and could be completely different values. How could I use the above information to detect if an article that's being published for the first time, is already existing within the database? I'm aware anything I'll design will not be perfect, the biggest risk being (1) Content that is not a duplicate will be flagged as duplicate (2) The system allows the duplicate content through. So the algorithm should generate a risk assessment number from 0 being no duplicate risk 5 being possible duplicate and 10 being duplicate. Anything above 5 then there's a good possibility that the content is duplicate. In this case the content could be flagged and linked to the article's that are possible duplicates and a human could decide whether to delete or allow. As I said before I'm storing keywords for the whole article, however I wonder if I could do the same on paragraph basis; this would also mean further separating my data in the DB but it would also make it easier for detecting (2) in my initial post. I'm thinking weighted average between the statistics, but in what order and what would be the consequences...

  Read the article

• What Precalculus knowledge is required before learning Discrete Math Computer Science topics?

  - by Ein Doofus

  Below I've listed the chapters from a Precalculus book as well as the author recommended Computer Science chapters from a Discrete Mathematics book. Although these chapters are from two specific books on these subjects I believe the topics are generally the same between any Precalc or Discrete Math book. What Precalculus topics should one know before starting these Discrete Math Computer Science topics?: Discrete Mathematics CS Chapters 1.1 Propositional Logic 1.2 Propositional Equivalences 1.3 Predicates and Quantifiers 1.4 Nested Quantifiers 1.5 Rules of Inference 1.6 Introduction to Proofs 1.7 Proof Methods and Strategy 2.1 Sets 2.2 Set Operations 2.3 Functions 2.4 Sequences and Summations 3.1 Algorithms 3.2 The Growths of Functions 3.3 Complexity of Algorithms 3.4 The Integers and Division 3.5 Primes and Greatest Common Divisors 3.6 Integers and Algorithms 3.8 Matrices 4.1 Mathematical Induction 4.2 Strong Induction and Well-Ordering 4.3 Recursive Definitions and Structural Induction 4.4 Recursive Algorithms 4.5 Program Correctness 5.1 The Basics of Counting 5.2 The Pigeonhole Principle 5.3 Permutations and Combinations 5.6 Generating Permutations and Combinations 6.1 An Introduction to Discrete Probability 6.4 Expected Value and Variance 7.1 Recurrence Relations 7.3 Divide-and-Conquer Algorithms and Recurrence Relations 7.5 Inclusion-Exclusion 8.1 Relations and Their Properties 8.2 n-ary Relations and Their Applications 8.3 Representing Relations 8.5 Equivalence Relations 9.1 Graphs and Graph Models 9.2 Graph Terminology and Special Types of Graphs 9.3 Representing Graphs and Graph Isomorphism 9.4 Connectivity 9.5 Euler and Hamilton Ptahs 10.1 Introduction to Trees 10.2 Application of Trees 10.3 Tree Traversal 11.1 Boolean Functions 11.2 Representing Boolean Functions 11.3 Logic Gates 11.4 Minimization of Circuits 12.1 Language and Grammars 12.2 Finite-State Machines with Output 12.3 Finite-State Machines with No Output 12.4 Language Recognition 12.5 Turing Machines Precalculus Chapters R.1 The Real-Number System R.2 Integer Exponents, Scientific Notation, and Order of Operations R.3 Addition, Subtraction, and Multiplication of Polynomials R.4 Factoring R.5 Rational Expressions R.6 Radical Notation and Rational Exponents R.7 The Basics of Equation Solving 1.1 Functions, Graphs, Graphers 1.2 Linear Functions, Slope, and Applications 1.3 Modeling: Data Analysis, Curve Fitting, and Linear Regression 1.4 More on Functions 1.5 Symmetry and Transformations 1.6 Variation and Applications 1.7 Distance, Midpoints, and Circles 2.1 Zeros of Linear Functions and Models 2.2 The Complex Numbers 2.3 Zeros of Quadratic Functions and Models 2.4 Analyzing Graphs of Quadratic Functions 2.5 Modeling: Data Analysis, Curve Fitting, and Quadratic Regression 2.6 Zeros and More Equation Solving 2.7 Solving Inequalities 3.1 Polynomial Functions and Modeling 3.2 Polynomial Division; The Remainder and Factor Theorems 3.3 Theorems about Zeros of Polynomial Functions 3.4 Rational Functions 3.5 Polynomial and Rational Inequalities 4.1 Composite and Inverse Functions 4.2 Exponential Functions and Graphs 4.3 Logarithmic Functions and Graphs 4.4 Properties of Logarithmic Functions 4.5 Solving Exponential and Logarithmic Equations 4.6 Applications and Models: Growth and Decay 5.1 Systems of Equations in Two Variables 5.2 System of Equations in Three Variables 5.3 Matrices and Systems of Equations 5.4 Matrix Operations 5.5 Inverses of Matrices 5.6 System of Inequalities and Linear Programming 5.7 Partial Fractions 6.1 The Parabola 6.2 The Circle and Ellipse 6.3 The Hyperbola 6.4 Nonlinear Systems of Equations

  Read the article

• C# Dev - I've tried Lisps, but I don't get it.

  - by Jonathan Mitchem

  After a few months of learning about and playing with lisps, both CL and a bit of Clojure, I'm still not seeing a compelling reason to write anything in it instead of C#. I would really like some compelling reasons, or for someone to point out that I'm missing something really big. The strengths of a Lisp (per my research): Compact, expressive notation - More so than C#, yes... but I seem to be able to express those ideas in C# too. Implicit support for functional programming - C# with LINQ extension methods: mapcar = .Select( lambda ) mapcan = .Select( lambda ).Aggregate( (a,b) = a.Union(b) ) car/first = .First() cdr/rest = .Skip(1) .... etc. Lambda and higher-order function support - C# has this, and the syntax is arguably simpler: "(lambda (x) ( body ))" versus "x = ( body )" "#(" with "%", "%1", "%2" is nice in Clojure Method dispatch separated from the objects - C# has this through extension methods Multimethod dispatch - C# does not have this natively, but I could implement it as a function call in a few hours Code is Data (and Macros) - Maybe I haven't "gotten" macros, but I haven't seen a single example where the idea of a macro couldn't be implemented as a function; it doesn't change the "language", but I'm not sure that's a strength DSLs - Can only do it through function composition... but it works Untyped "exploratory" programming - for structs/classes, C#'s autoproperties and "object" work quite well, and you can easily escalate into stronger typing as you go along Runs on non-Windows hardware - Yeah, so? Outside of college, I've only known one person who doesn't run Windows at home, or at least a VM of Windows on *nix/Mac. (Then again, maybe this is more important than I thought and I've just been brainwashed...) The REPL for bottom-up design - Ok, I admit this is really really nice, and I miss it in C#. Things I'm missing in a Lisp (due to a mix of C#, .NET, Visual Studio, Resharper): Namespaces. Even with static methods, I like to tie them to a "class" to categorize their context (Clojure seems to have this, CL doesn't seem to.) Great compile and design-time support the type system allows me to determine "correctness" of the datastructures I pass around anything misspelled is underlined realtime; I don't have to wait until runtime to know code improvements (such as using an FP approach instead of an imperative one) are autosuggested GUI development tools: WinForms and WPF (I know Clojure has access to the Java GUI libraries, but they're entirely foreign to me.) GUI Debugging tools: breakpoints, step-in, step-over, value inspectors (text, xml, custom), watches, debug-by-thread, conditional breakpoints, call-stack window with the ability to jump to the code at any level in the stack (To be fair, my stint with Emacs+Slime seemed to provide some of this, but I'm partial to the VS GUI-driven approach) I really like the hype surrounding Lisps and I gave it a chance. But is there anything I can do in a Lisp that I can't do as well in C#? It might be a bit more verbose in C#, but I also have autocomplete. What am I missing? Why should I use Clojure/CL?

  Read the article

• Can see samba shares but not access them

  - by nitefrog

  For the life of me I cannot figure this one out. I have samba installed and set up on the ubuntu box and on the Win7 box I CAN SEE all the shares I created. I created two users on ubuntu that map to the users in windows. On ubuntu they are both admins, user A & B on Windows User A is admin and user B is poweruser. User A can see both shares and access them, but user B can see everythin, but only access the homes directory, the other directory throws an error. I have two drives in Ubuntu and this is the smb.config file (I am new to samba): [global] workgroup = WORKGROUP server string = %h server (Samba, Ubuntu) wins support = no dns proxy = yes name resolve order = lmhosts host wins bcast log file = /var/log/samba/log.%m max log size = 1000 syslog = 0 panic action = /usr/share/samba/panic-action %d security = user encrypt passwords = true passdb backend = tdbsam obey pam restrictions = yes unix password sync = yes passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . pam password change = yes map to guest = bad user ; usershare max shares = 100 usershare allow guests = yes And here is the share section: Both user A & B can access this from windows. No problems. [homes] comment = Home Directories browseable = no writable = yes Both User A & B can see this share, but only user A can access it. User B get an error thrown. [stuff] comment = Unixmen File Server path = /media/data/appinstall/ browseable = yes ;writable = no read only = yes hosts allow = The permission for the media/data/appinstall/ is as follows: appInstall properties: share name: stuff Allow others to create and delete files in this folder is cheeked Guest access (for people without a user account) is checked permissions: Owner: user A Folder Access: Create and delete files File Access: --- Group: user A Folder Access: Create and delete files File Access: --- Others Folder Access: Create and delete files File Access: --- I am at a loss and need to get this work. Any ideas? The goal is to have a setup like this. 3 users on window machines. Each user on the data drive will have their own personal folder where they are the ones that can only access, then another folder where 2 of the users will have read only and one user full access. I had this setup before on windows, but after what happened I am NEVER going back to windows, so Unix here I am to stay! I am really stuck. I am running Ubuntu 11. I could reformat again and put on version 10 if that would make life easier. I have been dealing with this since Wed. 3pm. Thanks.

  Read the article

• What shall I include in a 10 week web technologies course?

  - by Iain

  In September I will be teaching a university module on web technologies. This session will be available to 1st year (freshman) students who don't necessarily have any programming knowledge or know how the web works. In the 2nd semester I will be teaching Flash, which is my specialism, so I know exactly what I am going to teach, but in the 1st semester I will be teaching them web standards technologies - HTML, CSS, JS, jQuery, PHP and MySQL. Where I need advice is how to proportion the emphasis for each part, and which parts of each technology to cover. Another real issue I'm struggling with is how much of the bad old ways should I teach them? Do they need to know about bold as well as strong, etc. UPDATE: based, on your feedback I will only be teaching the latest version of everything - CSS3, HTML5 etc. I'm not sure exactly how long the semester will be but I'm guessing about 10-12 weeks. Each session is a 2 hour lab. Obviously there's only so much I can cover in that time and it will be up to the students to go a research this stuff properly on W3 schools etc. My ideas so far were: Lesson 0 - Course intro and overview of the current tech landscape. What is out there, what will we be learning, what won't we. What is a web server, URL etc. Looking at different example websites and discussing how they work. Lesson 1 - HTML basics (head, body, title, img, table, a, lists, h1, strong etc) Lesson 2 - CSS for styling and layout - fonts, webfonts, float etc Lesson 3 - Intro to programming JS (variables, loops, conditionals, functions) Lesson 4 - more JS programming fundamentals, DOM manipulation Lesson 5 - jQuery - making things fly about and look cool Lesson 6 - XML and Ajax Lesson 7 - PHP basics - syntax, server-side principles Lesson 8 - PHP and MySQL - forms, logins, saving user info Lesson 9 - don't know Lesson 10 - don't know Please let me know if you think this is the right order, what have I missed, how to use any spare sessions etc. Thanks :) UPDATE BASED ON RESPONSES: Thanks for all your responses - some great stuff. To be absolutely clear, this is not a computer science course, it is a practical module on a creative technology course. The emphasis definitely has to be on making cool things work rather than understanding how the backbone of the internet works. That can come later, if the students are interested. At the end of the module I would like the students to be able to produce a web page or pages that does something cool, using some or all of the technologies I cover. Many of these topics are of course far beyond the scope of a 2 hour session, however I do not have the option of reducing the syllabus, I will just have to explain what the technology does and encourage the student to research it in their own time.

  Read the article

< Previous Page | 505 506 507 508 509 510 511 512 513 514 515 516  | Next Page >