Search Results

Search found 21057 results on 843 pages for 'video game consoles'.

Page 509/843 | < Previous Page | 505 506 507 508 509 510 511 512 513 514 515 516  | Next Page >

  • Get 5.1 surround sound from computer through a VCR config?

    - by Wedding Nails
    I'm posting to see if my idea of this setup is right and can be done. I currently have the following "equipment": a JVC VCR -quite old-, which has built in surround sound (aka it has several speaker outputs, which I believe is 5.1 and are connected to several speakers that are in every corner of the room), a computer with SPDIF optical output and a new flat screen TV (with built in HDMI). I want the computer to take advantage of the VCR's surround system (all the speakers in the room) in order to play mainly music and video always with all the speakers (5.1) and with the maximum sound quality. Currently, the computer plays sound only through the front speaker (I connect one output to the on board pc audio input) and the quality is really bad. As a side note, the computer video runs with S-video (old school), and the picture quality as you would imagine, is really bad with the new big LCD screen. My main goals are: to upgrade the picture with a new video card which would support HDMI (my tv has HDMI). to buy a SPDIF optical cable, connect one end to the VCR SPDIF input and the other end to the PC output This is theoretically what I've researched so far, and I came out with several questions: in this case, with the SPDIF cable connected, and all the configurations done in windows allowing the 5.1, will I get every content I play "converted" or played through all of my speakers? (I read this forum post). I already know that in order for this setup to play from all the speakers, the content/audio source has to be 5.1. but my question is, if there is a way to play from all of the speakers no matter what type of content I'm playing (that's why I said conversion there) I already know that HDMI cables carry digital sound. Is there a way I can only use said HDMI cord to the tv, and get sound through the VCR? (I'm not too sure about this, I would have to disable the TVs speakers and use the VCR surround as default, but I have no clue wether this can be done or not). Update: The ultimate question is, do I really have to rely on "sound virtualization" technology to get sound from all the speakers, no matter what content I play? (do I require a newer sound card, like a creative soundblaster with said technology?) Thanks!

    Read the article

  • Dual Use (Mice and Keyboayd) of Windows 7

    - by jmalais
    I saw some answers to this question however they were fairly old (at least 2 years) and primarily for Vista or previous Windows OS versions. My question is this: Is there a program that allows a single Windows 7 computer to have multiple users (2 needed) and allow for two mice and two keyboards on two screens. What I'm trying to achieve: I'd like for the ability to play a game on one monitor while another person surfs the web, uses a program, or possibly play a different game. Any ideas?

    Read the article

  • What's a good substitute for gnome terminal?

    - by Randell
    Lately, I've been opening up several terminals at a time. Having to alt-tab between terminals is confusing. I need something that combines several terminals in just one window. What are good alternatives? Edit: I don't like tabs. I want consoles in 2x2 grid arrangement in one window.

    Read the article

  • Can I use a USB monitor (like Mimo) as a primary monitor?

    - by Eduardo Molteni
    I have an old PC in the den without Video Card (I have to remove it after it start failing). I access it through Remote Desktop. I don't want to invest in a new video card since the PC is old. If I buy a USB monitor I can use it as a secondary monitor in the main pc, and plug to the old PC when need. The question is: Does the USB monitor work during booting before the OS was loaded?

    Read the article

  • ffmpeg logo blur

    - by ime
    i add logo on video with ffmpeg and in some videos it blurs. how to make logo independent from videos? i mean so that it no matter what quality of video logo will be good.

    Read the article

  • Remembering window's location and desktops on Mac OS X

    - by Daniel Cukier
    When I use my Mac, I like have a standard windows organization to do my Work: I put 4 consoles opened side by side on console 1 I put Safari in other Mail and iCal in another TextMate on other etc And depending on the work I do, I'd like to have different window configuration. And when I have a external monitor connected, I need another configuration. Is there any tool to make this? What is the best way to do it?

    Read the article

  • ffmpeg help converting

    - by ellman121
    so I've been trying to reencode a .mp4 video I have into a .avi so my cousin can use it on his Windows machine. He's not very tech-savvy, and doesn't want to deal with downloading any new programs to open .mp4 videos, but thats beside the point. The current string I'm using is ffmpeg -i Courage.Under.Fire.1996.BRRip.H264.AAC.5.1ch.Gopo.mp4 -sameq -acodec copy -vcodec copy CourageUnderFire.avi It produces the video, however doesn't give me any audio. Any assistance?

    Read the article

  • Linux running games in another x-session

    - by mnml
    I have been trying to optimize my settings to the maximum lately and someone told me that running a game in another xsessions w/ another user would increase my perfs. It will also allow me to kill it from the other x session at anytime without having to restart the computer when it gets stuck. Today I have tried to do that in a Xephyr "screen" and I had ten times less fps on glxgears, I haven't tried on a real game ran by wine yet. Just looking for some advices on that.

    Read the article

  • Is There Something Wrong With My Computer Or The Website Server?

    - by thewarspk
    Recently I've been playing one new game which is called THE WARS, it's so fucking interesting that has become the routine work of my life. Yesterday i carelessly downloaded some files with virus, now my computer can't work properly, i just found i couldn't open the game page! Im so mad now, im wondering is there something wrong with my computer or website server, if it's mine, i will find someone to fix my PC, please check out for me...thank you very much, here is the address http://wars.swagblack.com/webgamethewars.aspx

    Read the article

  • Can I disable comments by default on my YouTube videos?

    - by Philip Durbin
    Comments are unfortunately always automatically enabled when I upload a video to YouTube either via their website or iPhoto, but more often that not I later manually disable comments for each uploaded video by following the steps from the "comments on my videos" section of YouTube Help. I would much rather have comments automatically disabled, that is to say, disabled by default, for all of my uploaded videos. Is this possible? I couldn't find a setting for it.

    Read the article

  • What is the Worst Depiction of Computer Use in a Movie

    - by Robert Cartaino
    You know the type: "It's a Unix system. I know this" -- in Jurassic park where a computer-genius girl sees a computer and quickly takes over like a 3-D video game, flying through the file system to shut down the park. [video link to the scene] So what's your favorite movie gaff that shows Hollywood can be completely clueless when it comes to portraying technology?

    Read the article

  • Free media center PC software which runs on Windows XP

    - by Kent
    Is there something which may: Play music, at the very least in MP3-format Play video in various codec's Helps in recording video of shows from TV through a TV-in card Helps in organizing music and videos Works with a keyboard and mouse Additional pluses are: If it also is possible to browse the web through it, or at least start the web browser Has some games. Maybe through MAME or some other emulation like SNES or something. If it's also possible to control it through a game pad.

    Read the article

  • My Laptop Screen keeps flickering...

    - by Chris
    I have a lenovo g530 and the screen keeps flickering on occasion. Sometimes it is worse than others, and sometimes it doesn't seem to do it at all. I was able to capture a video of it so you could see what is happening. I kinda wanted someone else's opinion before I open it up and check the monitor cable on the board. Video Link (in case you missed it above)

    Read the article

  • Camtasia 6: Callout not hiding!!

    - by user35112
    i am creating a video in Camtasia Studio 6. I created a callout in timeline, In timeline its showing that this callout will hide after 5 seconds. When i play the movie the callout is not hiding but if i click on the timeline anywhere after the callout and play the video the callout is hidden. Whats going on???

    Read the article

  • How do I use HP webcam in ubuntu ?

    - by Omkant
    I bought hp-notebook pc in which there was windows vista and webcam was properly working but now I have put ubuntu in my laptop and I want to use my webcam for video-chatting and general video recording and snapshots . Please advise me how should I use my webcam using any driver or software or package?

    Read the article

  • How can I get the Terminal raster font to display alt codes in a text editor?

    - by grg-n-sox
    I am working on a project that includes making some ASCII art, except it isn't true ASCII art since I am using a far amount of Windows Alt codes to make it. Anyways, I wanted to make sure that as I am working on it, that it looks exactly how it will in a windows command prompt terminal session. So since command prompt defaults to the Terminal raster font, I figured I would use that. But I quickly noticed that when I use the Terminal typeface in a text editor, it will not render ASCII codes, either at all (as is the case most of the time) or incorrectly. Now, I understand if a font just doesn't support non-ASCII characters, but what I don't get is how the characters do show up correctly in command prompt when they don't in a text editor. I checked the output of the 'chcp' and it was set to 437 by default, which is what I need. Well, either that or 850 but preferably 437 since they got rid of some of the graphics in 437 and replaced them with other Latin characters. Command prompt terminal settings show I am using the Terminal raster font with a 8x12 glyph size. So I try using size 12 in the text editor but no good, even after switching the text encoding to either MS-DOS OEM-US (supposedly an alternative name for CP437) or UTF-8. I just don't get how I am not getting the characters to show up. Also, if it helps, the art I am making is basically modified screen shots from a game I play called Dwarf Fortress that uses characters from the Terminal/Curses typeset, or at least that is how it is reported in the forums by those who make graphics sets to replace the default character set. However, the game doesn't actually use the system's Terminal font. The game's data files includes a bitmap image that is a grid of all the characters the game uses. So it uses this bitmap to render graphics instead of the actual font file. And I basically want to get a text editor to make it so if I type up some ASCII art to look like a screenshot from Dwarf Fortress, that it will actually look like Dwarf Fortress other than the lack of color. Any help?

    Read the article

  • Exposing server uptime a potential security vulnerability?

    - by Edward Mazur
    I run a browser-based game and as part of a page with a bunch of game statistics, I have the server uptime listed. It's currently at 177 days and so someone mentioned to me that I shouldn't do this because a long uptime indicates the kernel is old and therefore missing security updates. This certainly sounds logical, but I searched around and couldn't find any evidence to support it. So I'm just wondering, is this indeed something I should not have exposed?

    Read the article

  • games not running on full screen

    - by ALY
    i have laptop hp dv6 with processor core2due hard 320 and video card intel 1 giga every time i try to play game i have to make it not on the full screen if its on the full sreen its stopped and get down to the windows bar try to get up it go down again i try this with many games its the same i try to decrease the screen or the game resolution its the same too i try to download the last version of direct x the same thing i use windows 7 so can any one help

    Read the article

  • How to split registration and media?

    - by Stackfan
    I have a SIP project. Where i will have SIP server running. Server will do following: will only do routing and receive incoming calls But the audio/video will be peer 2 peer Can this be done with Asterisk? Only the media i have to split but the registration will be with Server. Tools: A) server with SIP B) One PC with SIP client C) Anoher PC with SIP client My goal is: B and C gets connected via A and audio/video packets are not via A

    Read the article

  • How do you splice out a part of an xvid encoded avi file, with ffmpeg? (no problems with other files

    - by yegor
    Im using the following command, which works for most files, except what seems to be xvid encoded ones /usr/bin/ffmpeg -sameq -i file.avi -ss 00:01:00 -t 00:00:30 -ac 2 -r 25 -copyts output.avi So this should basically splice out 30 seconds of video + audio, starting from 1 minute mark. It does START encoding at the 00:01:00 mark but it goes all the way to the end of the file for some reason, ignoring that I want just 30 seconds. The output looks like this. FFmpeg version git-ecc4bdd, Copyright (c) 2000-2010 the FFmpeg developers built on May 31 2010 04:52:24 with gcc 4.4.3 20100127 (Red Hat 4.4.3-4) configuration: --enable-libx264 --enable-libxvid --enable-libmp3lame --enable-libopenjpeg --enable-libfaac --enable-libvorbis --enable-gpl --enable-nonfree --enable-libxvid --enable-pthreads --enable-libfaad --extra-cflags=-fPIC --enable-postproc --enable-libtheora --enable-libvorbis --enable-shared libavutil 50.15. 2 / 50.15. 2 libavcodec 52.67. 0 / 52.67. 0 libavformat 52.62. 0 / 52.62. 0 libavdevice 52. 2. 0 / 52. 2. 0 libavfilter 1.20. 0 / 1.20. 0 libswscale 0.10. 0 / 0.10. 0 libpostproc 51. 2. 0 / 51. 2. 0 [mpeg4 @ 0x17cf770]Invalid and inefficient vfw-avi packed B frames detected Input #0, avi, from 'file.avi': Metadata: ISFT : VirtualDubMod 1.5.10.2 (build 2540/release) Duration: 00:02:00.00, start: 0.000000, bitrate: 1587 kb/s Stream #0.0: Video: mpeg4, yuv420p, 672x368 [PAR 1:1 DAR 42:23], 25 tbr, 25 tbn, 25 tbc Stream #0.1: Audio: ac3, 48000 Hz, 5.1, s16, 448 kb/s File 'lol6.avi' already exists. Overwrite ? [y/N] y Output #0, avi, to 'lol6.avi': Metadata: ISFT : Lavf52.62.0 Stream #0.0: Video: mpeg4, yuv420p, 672x368 [PAR 1:1 DAR 42:23], q=2-31, 200 kb/s, 25 tbn, 25 tbc Stream #0.1: Audio: mp2, 48000 Hz, 2 channels, s16, 64 kb/s Stream mapping: Stream #0.0 -> #0.0 Stream #0.1 -> #0.1 Press [q] to stop encoding [mpeg4 @ 0x17cf770]Invalid and inefficient vfw-avi packed B frames detected [buffer @ 0x184b610]Buffering several frames is not supported. Please consume all available frames before adding a new one. frame= 1501 fps=104 q=0.0 Lsize= 15612kB time=30.02 bitrate=4259.7kbits/s ts/s video:15303kB audio:235kB global headers:0kB muxing overhead 0.482620% if I convert this file to mp4 for example, and then perform the same action, it works perfectly.

    Read the article

  • Way to dim outside windows / Turn the lights feature

    - by droidgren
    I am looking for a way to replicate the "Dim out" or "Turn the lights off" feature (that can be seen on various video sites on the web) into Windows ? This will darken (dim out) the active window. It could be a windows shell extension/plugin or a video player plugin that has this feature. The reason for I am looking for this is that I have a rather large monitor and doesn't use the whole screen when watching movies.

    Read the article

< Previous Page | 505 506 507 508 509 510 511 512 513 514 515 516  | Next Page >